<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>40</CFRTITLE>
    <CFRTITLETEXT>Protection of Environment</CFRTITLETEXT>
    <VOL>21</VOL>
    <DATE>2001-07-01</DATE>
    <ORIGINALDATE>2001-07-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>Applicability and purpose.</TITLE>
    <GRANULENUM>201.20</GRANULENUM>
    <HEADING>Section 201.20</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 40" SEQ="4">Protection of Environment</PARENT>
      <PARENT HEADING="CHAPTER I" SEQ="3">ENVIRONMENTAL PROTECTIONAGENCY (CONTINUED)</PARENT>
      <PARENT HEADING="SUBCHAPTER G" SEQ="2">NOISE ABATEMENT PROGRAMS</PARENT>
      <PARENT HEADING="PART 201" SEQ="1">NOISE EMISSION STANDARDS FOR TRANSPORTATION EQUIPMENT; INTERSTATE RAIL CARRIERS</PARENT>
      <PARENT HEADING="Subpart C" SEQ="0">Measurement Criteria</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SECTION>
    <SECTNO>§ 201.20</SECTNO>
    <SUBJECT>Applicability and purpose.</SUBJECT>
    <P>The following criteria are applicable to and contain the necessary parameters and procedures for the measurement of the noise emission levels prescribed in the standards of Subpart B of this part. These criteria are specified in order to further clarify and define such standards. Equivalent measurement procedures may be used for establishing compliance with these regulations. Any equivalent measurement procedure, under any circumstance, shall not result in a more stringent noise control requirement than those specified in this regulation using the measurement procedures in Subpart C.</P>
  </SECTION>
</CFRGRANULE>
