<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>40</CFRTITLE>
    <CFRTITLETEXT>Protection of Environment</CFRTITLETEXT>
    <VOL>19</VOL>
    <DATE>2002-07-01</DATE>
    <ORIGINALDATE>2002-07-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule.</TITLE>
    <GRANULENUM>147.103</GRANULENUM>
    <HEADING>Section 147.103</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 40" SEQ="4">Protection of Environment</PARENT>
      <PARENT HEADING="CHAPTER I" SEQ="3">ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)</PARENT>
      <PARENT HEADING="SUBCHAPTER D" SEQ="2">WATER PROGRAMS (CONTINUED)</PARENT>
      <PARENT HEADING="PART 147" SEQ="1">STATE UNDERGROUND INJECTION CONTROL PROGRAMS</PARENT>
      <PARENT HEADING="Subpart C" SEQ="0">Alaska</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SECTION>
    <SECTNO>§ 147.103</SECTNO>
    <SUBJECT>Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule.</SUBJECT>
    <P>Maximum injection pressure. The owner or operator shall limit injection pressure to the lesser of:</P>
    <P>(a) A value which will not exceed the operating requirements of § 144.28(f)(3) (i) or (ii) as applicable; or</P>

    <P>(b) A value for well head pressure calculated by using the following formula:
    </P>
    <EXTRACT>
      <FP SOURCE="FP-1">Pm=(0.733-0.433 Sg)d</FP>
      
      <FP SOURCE="FP-1">where:</FP>
      
      <FP SOURCE="FP-1">Pm=injection pressure at the well head in pounds per square inch</FP>
      <FP SOURCE="FP-1">Sg=specific gravity of inject fluid (unitless)</FP>
      <FP SOURCE="FP-1">d=injection depth in feet.</FP>
    </EXTRACT>
  </SECTION>
</CFRGRANULE>
