<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>49</CFRTITLE>
    <CFRTITLETEXT>Transportation</CFRTITLETEXT>
    <VOL>4</VOL>
    <DATE>2003-10-01</DATE>
    <ORIGINALDATE>2003-10-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>Jumpers; cable connections.</TITLE>
    <GRANULENUM>229.89</GRANULENUM>
    <HEADING>Section 229.89</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 49" SEQ="5">Transportation</PARENT>
      <PARENT HEADING="Subtitle B" SEQ="4">Other Regulations Relating To Transportation (Continued)</PARENT>
      <PARENT HEADING="CHAPTER II" SEQ="3">FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION</PARENT>
      <PARENT HEADING="PART 229" SEQ="2">RAILROAD LOCOMOTIVE SAFETY STANDARDS</PARENT>
      <PARENT HEADING="Subpart C" SEQ="1">Safety Requirements</PARENT>
      <PARENT HEADING="" SEQ="0">Electrical System</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SECTION>
    <SECTNO>§ 229.89</SECTNO>
    <SUBJECT>Jumpers; cable connections.</SUBJECT>
    <P>(a) Jumpers and cable connections between locomotives shall be so located and guarded to provide sufficient vertical clearance. They may not hang with one end free.</P>
    <P>(b) Cable and jumper connections between locomotive may not have any of the following conditions:</P>
    <P>(1) Broken or badly chafed insulation.</P>
    <P>(2) Broken plugs, receptacles or terminals.</P>
    <P>(3) Broken or protruding strands of wire.</P>
  </SECTION>
</CFRGRANULE>
