Where there is a change in the name of an individual operating as a manufacturer, of tobacco products he shall, within 30 days of such change, make application on Form 2098 for an amended permit.

Where there is a change in, or an addition or discontinuance of, a trade name used by a manufacturer of tobacco products in connection with operations authorized by his permit the manufacturer shall, within 30 days of such change, addition or discontinuance, make application on Form 2098 for an amended permit to reflect such change. The manufacturer shall also furnish a true copy of any new trade name certificate or document issued to him, or statement in lieu thereof, required by § 40.65.

Where there is a change in the name of a corporate manufacturer of tobacco products, the manufacturer shall, within 30 days of such change, make application on Form 2098 for an amended permit. The manufacturer shall also furnish such documents as may be necessary to establish that the corporate name has been changed.

If an administrator, executor, receiver, trustee, assignee, or other fiduciary, is to take over the business of a manufacturer of tobacco products, as a continuing operation, such fiduciary shall, before commencing operations, make application for permit and file bond as required by subpart E, of this part, furnish certified copies, in duplicate, of the order of the court, or other pertinent documents, showing his appointment and qualification as such fiduciary, and make a commencing inventory, in accordance with the provisions of § 40.201: Provided, That where a diagram has been furnished by the predecessor, in accordance with the provisions of § 40.69, the successor may adopt such diagram if it is currently complete and accurate. However, where a fiduciary intends only to liquidate the business, qualification as a manufacturer of tobacco products will not be required if he promptly files with the regional director (compliance) a written statement to that effect, in duplicate, together with an extension of coverage of the predecessor's bond, executed by the fiduciary and the surety on such bond, in accordance with the provisions of § 40.137.

If a transfer is to be made in ownership of the business of a manufacturer of tobacco products (including a change of any member of a partnership or association), such manufacturer shall give notice, in writing, to the regional director (compliance), naming the proposed successor and the desired effective date of such transfer. The proposed successor shall, before commencing operations, qualify as a manufacturer of tobacco products, in accordance with the applicable provisions of subpart E of this part: Provided, That where a diagram has been furnished by the manufacturer in accordance with the provisions of § 40.69, the proposed successor may adopt such diagram if it is currently complete and accurate. The manufacturer shall give such notice of transfer, and the proposed successor shall make application for permit and file bond, as required, in ample time for examination and approval thereof before the desired date of such change. The predecessor shall make a concluding inventory and concluding report, in accordance with the provisions of §§ 40.201 and 40.202, respectively, and surrender his permit with such inventory and report. The successor shall make a commencing inventory and commencing report, in accordance with the provisions of §§ 40.201 and 40.202, respectively.

Upon election or appointment (excluding successive reelection or reappointment) of any officer or director of a corporation operating the business of a manufacturer of tobacco products, or upon any occurrence which results in a person acquiring ownership or control of more than ten percent in aggregate of the outstanding stock of such corporation, the manufacturer shall, within 30 days of such action, so notify the regional director (compliance) in writing, giving the identity of such person. When there is any change in the authority furnished under § 40.63 for officers to act in behalf of the corporation the manufacturer shall immediately so notify the regional director (compliance) in writing.

Where the issuance, sale, or transfer of the stock of a corporation, operating as a manufacturer of tobacco products, results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days after the change occurs, make application on Form 2093 for a new permit. Otherwise, the present permit shall be automatically terminated at the expiration of such 30-day period, and the manufacturer shall dispose of all tobacco products on hand, in accordance with this part, make a concluding inventory and concluding report, in accordance with the provisions of §§ 40.201 and 40.202, respectively, and surrender his permit with such inventory and report. If the application for a new permit is timely made, the present permit shall continue in effect pending final action with respect to such application.

Whenever a manufacturer of tobacco products intends to relocate his factory within the same region, the manufacturer shall, before commencing operations at the new location, make application on Form 2098 for, and obtain, an amended permit. The application shall be supported by an extension of coverage of bond in accordance with the provisions of § 40.137.

Whenever any change occurs in the address, but not the location, of the factory of a manufacturer of tobacco products, as a result of action of local authorities, the manufacturer shall, within 30 days of such change, make application on Form 2098 for an amended permit.

Whenever a manufacturer of tobacco products intends to remove his factory to another region, the manufacturer shall, before commencing operations at the new location, qualify as such a manufacturer in the new region, in accordance with the applicable provisions of subpart E of this part. The manufacturer shall notify the regional director (compliance) for the region from which he is removing his factory of his qualification in the new region, giving the address of the new location of his factory and the number of the permit issued to him in the new region, make a concluding inventory and concluding report in accordance with the provisions of §§ 40.201 and 40.202, respectively, and surrender the permit for his old location with such inventory and report.

Where a tobacco products factory is to be changed to an extent which will make inaccurate the description of the factory as set forth in the last application by the manufacturer for permit, on the diagram, if any, furnished with such application, the manufacturer shall first make an application on Form 2098 for, and obtain, an amended permit. Such application shall describe the proposed change in the factory and shall be accompanied by a new diagram if required under the provisions of § 40.69.

Except for removals in bond and transfers in bond, as authorized by law, the taxes imposed on tobacco products by section 5701, I.R.C., shall be determined at the time of removal of such products and paid on the basis of a return, in accordance with the provisions of this part.

Every manufacturer of tobacco products shall file, for each of his factories, a semimonthly tax return on Form 5000.24 for each return period, including any period during which a manufacturer begins or discontinues business. The return shall be filed with ATF in accordance with the instructions on the form. The manufacturer shall file the return at the time specified in § 40.165 regardless of whether tobacco products are removed or whether tax is due for that particular return period. However, when the manufacturer requests by letter and the regional director (compliance) grants specific authorization, the manufacturer need not during the term of such authorization file a tax return for which tax is not due or payable.

Except as provided in section 40.164, the periods to be covered by semimonthly tax returns shall be from the 1st day of each month through the 15th day of that month and from the 16th day of each month through the last day of that month.

(a)(1) Except as provided in paragraph (a)(2) of this section, the second semimonthly period for the month of September shall be divided into two payment periods, from the 16th day through the 26th day, and from the 27th day through the 30th day. The manufacturer shall file a return on Form 5000.24, and make remittance, for the period September 16-26, no later than September 29. The manufacturer shall file a return on Form 5000.24, and make remittance, for the period September 27-30, no later than October 14.

(2) Taxpayment not by electronic fund transfer. In the case of taxes not required to be remitted by electronic fund transfer as prescribed by § 40.165a, the second semimonthly period of September shall be divided into two payment periods, from the 16th day through the 25th day, and the 26th day through the 30th day. The manufacturer shall file a return on Form 5000.24, and make remittance, for the period September 16-25, no later than September 28. The manufacturer shall file a return on Form 5000.24, and make remittance, for the period September 26-30, no later than October 14.

(b) Amount of payment: Safe harbor rule. (1) Taxpayers are considered to have met the requirements of paragraph (a)(1) of this section, if the amount paid no later than September 29 is not less than 11/15 (73.3 percent) of the tax liability incurred for the semimonthly period beginning on September 1 and ending on September 15, and if any underpayment of tax is paid by October 14.

(2) Taxpayers are considered to have met the requirements of paragraph (a)(2) of this section, if the amount paid no later than September 28 is not less than 2/3rds (66.7 percent) of the tax liability incurred for the semimonthly period beginning on September 1 and ending on September 15, and if any underpayment of tax is paid by October 14.

(c) Last day for payment. If the required due date for taxpayment for the periods September 16-25 or September 16-26 as applicable, falls on a Saturday or legal holiday, the return and remittance shall be due on the immediately preceding day. If the required due date falls on a Sunday, the return and remittance shall be due on the immediately following day.

(d) Example. Payment of tax for the month of September—(1) Facts. X, a manufacturer of tobacco products required to pay taxes by electronic fund transfer, incurred tax liability in the amount of $30,000 for the first semimonthly period of September. For the period September 16-26, X incurred tax liability in the amount of $45,000, and for the period September 27-30, X incurred tax liability in the amount of $2,000.

(2) Payment requirement. X's payment of tax in the amount of $30,000 for the first semimonthly period of September is due no later than September 29 (§ 40.165(a)). X's payment of tax for the period September 16-26 is also due no later than September 29 (§ 40.164(a)(1)). X may use the safe harbor rule to determine the amount of payment due for the period of September 16-26 (§ 40.164(b)). Under the safe harbor rule, X's payment of tax must equal $21,990.00, 11/15ths of the tax liability incurred during the first semimonthly period of September. Additionally, X's payment of tax in the amount of $2,000 for the period September 27-30 must be paid no later than October 14 (§ 40.164(a)(1)). X must also pay the underpayment of tax, $23,010.00, for the period September 16-26, no later than October 14 (§ 40.164(b)).

(a) General. Except as provided by § 40.164, and paragraph (b) of this section, semimonthly returns on Form 5000.24 shall be filed, for each return period, not later than the 14th day after the last day of the return period. If the due date falls on a Saturday, Sunday, or legal holiday, the return and remittance shall be due on the immediately preceding day which is not a Saturday, Sunday, or legal holiday, except as provided by § 40.164(c).

(b) Postmark. The official postmark of the U.S. Postal Service stamped on the cover in which the return was mailed shall be considered the date of delivery of the tax return and, if the return was accompanied by a remittance, the date of delivery of the remittance. When the postmark is illegible, the manufacturer shall prove when the postmark was made. When the proprietor sends the tax return with or without remittance by registered mail or by certified mail, the date of registry or the date of the postmark on the sender's receipt of certified mail, as the case may be, shall be treated as the date of delivery of the tax return and, if accompanied, of the remittance.

(a) General. (1) Each taxpayer who was liable, during a calendar year, for a gross amount equal to or exceeding five million dollars in taxes on tobacco products, cigarette papers, and cigarette tubes combining tax liabilities incurred under this part and parts 275 and 285 of this chapter, shall use a commercial bank in making payment by electronic fund transfer (EFT) of taxes on tobacco products, cigarette papers, and cigarette tubes during the succeeding calendar year. Payment of taxes on tobacco products by cash, check, or money order, as described in § 40.168, is not authorized for a taxpayer who is required, by this section, to make remittances by EFT. For purposes of this section, the dollar amount of tax liability is defined as the gross tax liability on all taxable withdrawals and importations (including tobacco products, cigarette papers, and cigarette tubes brought into the United States from Puerto Rico or the Virgin Islands) during the calendar year, without regard to any drawbacks, credits, or refunds, for all premises from which such activities are conducted by the taxpayer. Overpayments are not taken into account in summarizing the gross tax liability.

(2) For the purposes of this section, a taxpayer includes a controlled group of corporations, as defined in 26 U.S.C. 1563, and implementing regulations in 26 CFR 1.1563-1 through 1.1563-4, except that the words “at least 80 percent” shall be replaced by the words “more than 50 percent” in each place it appears in subsection (a) of 26 U.S.C. 1563, as well as in the implementing regulations. Also, the rules for a “controlled group of corporations” apply in a similar fashion to groups which include partnerships and/or sole proprietorships. If one entity maintains more than 50% control over a group consisting of corporations and one, or more, partnerships and/or sole proprietorships, all of the members of the controlled group are one taxpayer for the purpose of determining who is required to make remittances by EFT.

(3) A taxpayer who is required by this section to make remittances by EFT, shall make a separate EFT remittance and file a separate return, Form 5000.24, for each factory from which tobacco products are withdrawn upon determination of tax.

(b) Requirements. (1) On or before January 10 of each calendar year, except for a taxpayer already remitting the tax by EFT, each taxpayer who was liable for a gross amount equal to or exceeding five million dollars in taxes on tobacco products, cigarette papers, and cigarette tubes combining tax liabilities incurred under this part and parts 275 and 285 of this chapter, during the previous calendar year, shall notify, in writing, the regional director (compliance), for each region in which taxes are paid. The notice shall be an agreement to make remittances by EFT.

(2) For each return filed in accordance with this part, the taxpayer shall direct the taxpayer's bank to make an electronic fund transfer in the amount of the tax payment to the Treasury Account as provided in paragraph (e) of this section. The request shall be made to the bank early enough for the transfer to be made to the Treasury Account by no later than the close of business on the last day for filing the return, prescribed in § 40.165 or § 40.167. The request shall take into account any time limit established by the bank.

(3) If a taxpayer was liable for less than five million dollars in taxes on tobacco products, cigarette papers, and cigarette tubes combining tax liabilities incurred under this part and parts 275 and 285 of this chapter during the preceding calendar year, the taxpayer may choose either to continue remitting the tax as provided in this section or to remit the tax with the return on as prescribed by § 40.168. Upon filing the first return which the taxpayer chooses to discontinue remitting the tax by EFT and to begin remitting the tax with the tax return, the taxpayer shall notify the regional director (compliance) by attaching a written notification to Form 5000.24, stating that no taxes are due by EFT, because the tax liability during the preceding calendar year was less than five million dollars, and that the remittance shall be filed with the tax return.

(c) Remittance. (1) Each taxpayer shall show on the return, Form 5000.24, information about remitting the tax for that return period by EFT and shall file the return with the ATF, in accordance with the instructions on Form 5000.24.

(2) Remittances shall be considered as made when the taxpayment by electronic fund transfer is received by the Treasury Account. For purposes of this section, a taxpayment by electronic fund transfer shall be considered as received by the Treasury Account when it is paid to a Federal Reserve Bank.

(3) When the taxpayer directs the bank to effect an electronic fund transfer message as required by paragraph (b)(2) of this section, any transfer data record furnished to the taxpayer, through normal banking procedures, will serve as the record of payment, and shall be retained as part of required records.

(d) Failure to make a taxpayment by EFT. The taxpayer is subject to a penalty imposed by 26 U.S.C. 5761, 6651, or 6656, as applicable, for failure to make a tax payment by EFT on or before the close of business on the prescribed last day for filing.

(e) Procedure. Upon the notification required under paragraph (b)(1) of this section, the regional director (compliance) will issue to the taxpayer an ATF Procedure entitled, Payment of Tax by Electronic Fund Transfer. This publication outlines the procedure a taxpayer is to follow when preparing returns and EFT remittances in accordance with this part. The U.S. Customs Service will provide the taxpayer with instructions for preparing EFT remittances for payments to be made to the U.S. Customs Service.

Where a check or money order tendered with any return, whether semi-monthly or prepayment, for payment of tax on tobacco products is not paid on presentment, where a manufacturer fails to remit with the return the full amount of tax due thereunder, or where a manufacturer is otherwise in default in payment of tax on tobacco products under the internal revenue laws or this chapter, during the period of such default and until the regional director (compliance) finds that the revenue will not be jeopardized by the deferred payment of tax pursuant to the provisions of this part, no tobacco products shall be removed subject to tax until the tax thereon has first been paid as provided in § 40.167. Any remittance made during the period of a default shall be in cash, or in the form of a certified, cashier's, or treasurer's check drawn on any bank or trust company incorporated under the laws of the United States, or under the laws of any State, Territory, or possession of the United States, or in the form of a U.S. postal money order or other money order, and defined in § 70.61 of this chapter (payment by check or money order), or shall be delivered in the form of an electronic fund transfer message as provided in § 40.165a.

(a) To prepay the tax on tobacco products a manufacturer shall file a prepayment tax return on Form 5000.24 showing the tax to be paid on the tobacco products prior to removal. The return shall be executed and filed, prior to the removal of such products, with ATF, in accordance with the instructions on the form. A manufacturer prepaying the taxes on tobacco products under the provisions of this section shall continue to file semimonthly returns as required by § 40.162.

(b) However, if a manufacturer is required by § 40.165a to pay the tax by electronic fund transfer, the manufacturer shall prepay the tax before any tobacco products can be removed for consumption or sale by completing the return and filing it with ATF, in accordance with the instructions on the form. At the same time, the manufacturer shall direct his bank to effect an EFT.

Except when an electronic fund transfer has been made under § 40.165a for the full amount of tax due, the tax on tobacco products shown to be due and payable on any return shall be paid by remittance in full with the tax return. The remittance may be in the form which the regional director (compliance) is authorized to accept under § 70.61 of this chapter (Payment by check or money order) and which is acceptable to him, except as otherwise specified in § 40.166. Checks and money orders shall be made payable to the “Bureau of Alcohol, Tobacco and Firearms”. In paying the tax, a fractional part of a cent shall be disregarded unless it amounts to one-half cent or more, in which case it shall be increased to one cent.

The employer identification number (defined at 26 CFR 301.7701-12) of a manufacturer of tobacco products who has been assigned such a number shall be shown on each tax return, Form 5000.24. Failure of the manufacturer to include his employer identification number on Form 5000.24 may result in assertion and collection of the penalty specified in § 70.113 of this chapter.

Every manufacturer of tobacco products who has neither secured an employer identification number nor made application therefor shall file an application on Form SS-4. Form SS-4 may be obtained from any service center director or from any district director. Such application shall be filed on or before the seventh day after the date on which any tax return under this part is filed. Each manufacturer shall make application for and shall be assigned only one employer identification number for all internal revenue tax purposes.

The application on Form SS-4, together with any supplementary statement, shall be prepared in accordance with the form, instructions, and regulations applicable thereto, and shall set forth fully and clearly the data therein called for. The application shall be filed with the service center director serving any internal revenue district where the applicant is required to file returns under this part, except that hand-carried applications may be filed with the district director of any such district as provided for in 26 CFR 301.6091-1. The application shall be signed by (a) the individual if the person is an individual; (b) the president, vice president, or other principal officer if the person is a corporation; (c) a responsible and duly authorized member or officer having knowledge of its affairs if the person is a partnership or other unincorporated organization; or (d) the fiduciary if the person is a trust or estate.

Every manufacturer of tobacco products must keep records of his operations and transactions which shall reflect, for each day, the information specified in §§ 40.182 and 40.183. For this purpose day shall mean calendar day, except that the regional director (compliance) may, upon application of the manufacturer by letter, in duplicate, authorize as such day for a factory a 24-hour cycle of operation other than the calendar day. A day once so established as other than the calendar day may be changed only by another application approved by the regional director (compliance). No specific form is required. The manufacturer may use commercial records from which the required information may be readily ascertained for this purpose. The manufacturer shall keep the auxiliary and supplemental records from which such records are compiled and shall keep supporting records, as specified in §§ 40.184 and 40.186, of tobacco products removed subject to tax and transferred in bond. Except as provided in §§ 40.184 and 40.186, the entries in the commercial records so maintained or kept shall be made not later than the close of the next business day following the day on which the transaction(s) occurred. As used in this section the term business day shall mean any day other than Saturday, Sunday, a legal holiday in the District of Columbia, or a statewide legal holiday in the State wherein the factory to which the records relate is located.

The record of a manufacturer of tobacco products shall show the date and total quantities of all tobacco products, by kind (small cigars-large cigars; small cigarettes-large cigarettes; chewing tobacco-snuff; pipe tobacco; roll-your-own tobacco):

(a) Manufactured;

(b) Received in bond by—

(1) Transfer from other factories,

(2) Release from customs custody,

(3) Transfer from export warehouses, and

(4) Transfer from foreign trade zone;

(c) Received by return to bond;

(d) Disclosed as an overage by inventory;

(e) Removed subject to tax (itemize large cigars by sale price in accordance with § 40.22, except cigars that cost more than $235.294 may optionally be shown as if the price were $236 per thousand);

(f) Removed, in bond, for—

(1) Export,

(2) Transfer to export warehouses,

(3) Transfer to other factories,

(4) Transfer to a foreign trade zone

(5) Use of the United States, and

(6) Experimental purposes off factory premises;

(g) Otherwise disposed of, without determination of tax, by—

(1) Consumption by employees on factory premises,

(2) Consumption by employees off factory premises, together with the number of employees to whom furnished,

(3) Use for experimental purposes on factory premises,

(4) Loss,

(5) Destruction, and

(6) Reduction to materials;

(h) Disclosed as a shortage by inventory; and

(i) On which the tax has been determined and which are—

(1) Received, and

(2) Disposed of.

(a) Requirement. Every manufacturer of tobacco products must keep a record of tobacco products removed from the factory subject to tax. The manufacturer must make entries in this record at the time of removal. The record for each removal must show:

(1) The date of removal,

(2) The name and address of the person to whom shipped or delivered,

(3) The kind and quantity of tobacco products removed, and

(4) For large cigars, show the sale price (If the sale price is more than $235.294 per thousand, you may place a note to that effect in the record instead of the actual price).

(b) Exceptions. (1) The record of removal may consist of the manufacturer's commercial documents, such as copies of invoices, rather than records prepared expressly to meet the requirements of this section. If commercial documents are used, they must be kept at the factory, contain all the details required by this section, and be clear and accurate. Commercial documents that do not show specifically the tax classification of tobacco products (including sale price of large cigars) are still acceptable if they contain adequate information for an ATF officer to readily ascertain the applicable tax.

(2) Where tobacco products are delivered within the factory directly to the consumer, the record need not show the name and address of the consumer.

All records required to be kept under this part, including copies of authorizations, claims, inventories, notices, reports, returns and schedules, shall be retained by the manufacturer for three years following the close of the calendar year in which filed or made, or in the case of an authorization, for three years following the close of the calendar year in which the operation under such authorization is concluded. Such records shall be kept in the factory or a place convenient thereto, and shall be made available for inspection by any ATF officer upon his request.

Every manufacturer of tobacco products shall keep a supporting record of tobacco products transferred in bond to or received in bond from other factories, and shall make the entries therein at the time of each receipt or removal of such products. Such supporting records shall show the date of receipt or removal, the name of the manufacturer and address of the factory from which received or to which removed or the permit number of such factory, and the kind and quantity of tobacco products. Where the manufacturer keeps, at the factory, copies of invoices or other commercial records containing the information required as to each receipt and removal, in such orderly manner that the information may be readily ascertained therefrom, such copies will be considered the supporting record required by this section.

Every manufacturer of tobacco products who removes large cigars from the factory shall keep such records as are necessary to establish and verify the price for which the cigars are sold, in accordance with § 40.22. The record shall be a continuing one of each brand and size of cigar so that the sale price on which the tax is based may be readily ascertained.

Every manufacturer of tobacco products shall make true and accurate inventories on Form 5210.9, which inventories shall include all tobacco products and tobacco on hand required to be accounted for in the records kept under this part. The manufacturer shall make such an inventory at the time of commencing business, which shall be the effective date of the permit issued upon original qualification under this part; at the time of transferring ownership; at the time of changing the location of his factory to a different region; at the time of concluding business; and at such other time as any ATF officer may require. Each inventory shall be prepared in duplicate, and shall be subject to verification by an ATF officer. The original of each such inventory shall be submitted to the regional director (compliance), and the duplicate shall be retained by the manufacturer.

(a) Monthly report. Every manufacturer of tobacco products shall make a report on Form 5210.5, in duplicate, for each month and for any portion of a month during which he engages in such business. Such report shall be made regardless of whether any operations or transactions occurred during the month or portion of a month covered therein. The report for a month or portion of a month in which business is commenced or is concluded shall be conspicuously marked “Commencing Report” or “Concluding Report,” respectively. The original of the report shall be submitted to the regional director (compliance) not later than the 20th day of the month succeeding the month covered therein, and the duplicate shall be retained by the manufacturer. Each report shall show, for the period covered, the total quantity of tobacco products:

(1) Manufactured,

(2) Received in bond,

(3) Received by return to bond,

(4) Disclosed by inventory as an overage,

(5) Removed subject to tax,

(6) Removed in bond,

(7) Otherwise disposed of without determination of tax,

(8) Disclosed by inventory as a shortage, and

(9) On hand, in bond, beginning of and end of month.

(b) Report of wholesale prices of large cigars removed before January 1, 1991. Every manufacturer of tobacco products who removes large cigars from his factory, and who issues announcements such as those described in this paragraph, shall make a report of each establishment or change of wholesale price (suggested delivered price to retailers) for large cigars. The report shall consist of a copy of each general announcement that the manufacturer issues within his organization or to the trade about establishment or changes of wholesale prices. Only one copy of an announcement need be submitted even if it relates to tobacco products removed subject to tax from more than one factory. If this copy does not show the actual date when the announcement was issued, or identify the factory or factories from which removals of the cigars covered by the announcement are made, then the copy shall be annotated to show this information. The factory or factories shall be identified either by permit number(s) or by name, city and state. If an intraorganizational announcement involves a forthcoming price change or new product which at the time of issuance is to remain confidential until a later date, the manufacturer may include a statement to this effect on the copy submitted. The copy shall be submitted to the Associate Director (Compliance Operations), Attn: Industry Control Division, Bureau of Alcohol, Tobacco and Firearms, Washington, DC 20226, within five business days after the day issued.

All tobacco products shall, before removal subject to tax, be put up by the manufacturer in packages which shall be of such construction as will securely contain the products therein and maintain the mark and the notice thereon as required by this part. No package of tobacco products shall have contained therein, attached thereto, or stamped, marked, written, or printed thereon (a) any certificate, coupon, or other device purporting to be or to represent a ticket, chance, share, or an interest in, or dependent on, the event of a lottery, (b) any indecent or immoral picture, print, or representation, or (c) any statement or indication that United States tax has been paid.

Every package of tobacco products packaged in a domestic factory shall, before removal subject to tax, have adequately imprinted thereon, or on a label securely affixed thereto, a mark as specified in this section. The mark may consist of the name of the manufacturer removing the product subject to tax and the location (by city and State) of the factory from which the products are to be so removed, or may consist of the permit number of the factory from which the products are to be so removed. (Any trade name of the manufacturer approved as provided in § 40.65 may be used in the mark as the name of the manufacturer.) As an alternative, where tobacco products are packaged and removed subject to tax by the same manufacturer, either at the same or different factories, the mark may consist of the name of such manufacturer if the factory where packaged is identified on or in the package by a means approved by the Director. Before using the alternative, the manufacturer shall notify the Director in writing of the name to be used as the name of the manufacturer and the means to be used for identifying the factory where packaged. If approved by him the Director shall return approved copies of the notice to the manufacturer. A copy of the approved notice shall be retained as part of the factory records at each of the factories operated by the manufacturer.

Tobacco products labeled for export are ineligible for removal from the factory and distribution into the domestic U.S. market. Such products may only be sold, transferred or delivered onto the domestic U.S. market by a manufacturer of tobacco products after repackaging of the product. For the purposes of this section, “repackaging” shall mean the removal of the tobacco product from its original package bearing the export marks and placement of the product in a new package. The new packages, marks and notices must conform to the requirements of this subpart.

Before removal subject to tax, every package of cigars shall have adequately imprinted on it, or on a label securely affixed to it—

(a) The designation “cigars”;

(b) The quantity of cigars contained in the package; and

(c) For small cigars, the classification of the product for tax purposes (i.e., either “small” or “little”).

Every package of cigarettes shall, before removal subject to tax, have adequately imprinted thereon, or on a label securely affixed thereto, the designation “cigarettes”, the quantity of such product contained therein, and the classification for tax purposes, i.e., for small cigarettes, either “small” or “Class A”, and for large cigarettes, either “large” or “Class B”.

(a) Product designation. Every package of chewing tobacco or snuff shall, before removal subject to tax, have adequately imprinted thereon, or on a label securely affixed thereto, the designation “chewing tobacco” or “snuff.” As an alternative, packages of chewing tobacco may be designated “Tax Class C”, and packages of snuff may be designated “Tax Class M”.

(b) Product weight. Every package of chewing tobacco or snuff shall, before removal subject to tax, have adequately imprinted thereon, or on a label securely affixed thereto, a clear statement of the actual pounds and ounces of the product contained therein. As an alternative, the shipping cases containing packages of chewing tobacco or snuff may, before removal, have adequately imprinted thereon, or on a label securely affixed thereto, a clear statement, in pounds and ounces, of the total weight of the product, the tax class of the product, and the total number of the packages of product contained therein.

(a) Product designation. Every package of pipe tobacco shall, before removal subject to tax, have adequately imprinted thereon, or on a label securely affixed thereto, the designation “pipe tobacco.” As an alternative, packages of pipe tobacco may be designated “Tax Class L.”

(b) Product weight. Every package of pipe tobacco shall, before removal subject to tax, have adequately imprinted thereon, or on a label securely affixed thereto, a clear statement of the actual pounds and ounces of the product contained therein.

(a) Product designation. Before removal subject to tax, roll-your-own tobacco must have adequately imprinted on, or on a label securely affixed to, the package, the designation “roll-your-own tobacco” or “cigarette tobacco” or “Tax ClassJ.”

(b) Product weight. Before removal subject to tax, roll-your-own tobacco must have a clear statement of the actual weight in pounds and ounces of the product in the package. This statement must be adequately imprinted on, or on a label securely affixed to, the package.

(a) A manufacturer must have used such packaging for roll-your-own tobacco before January 1, 2000.

(b) A manufacturer of roll-your-own tobacco may continue to place roll-your-own tobacco in packages that do not meet the marking requirements of §§ 40.212 and 40.216b(b) until April 1, 2000.

(c) A manufacturer of roll-your-tobacco may continue to place roll-your-tobacco in packages that do not meet the requirements of § 40.216b(a) until October 1, 2000.

Where a manufacturer of tobacco products desires to repackage, outside the factory, tobacco products on which the tax has been determined or which were removed for a tax-exempt purpose or transferred in bond to an export warehouse, or to repackage tax determined tobacco products in the factory, he shall make application for authorization to do so, in duplicate, to the regional director (compliance) for the region in which the products are to be repackaged. The application shall set forth the location and the number of packages, a description of the contents, the tax status of the tobacco products the reason for wanting to repackage the products (e.g., packages soiled, damaged, or otherwise in a condition making the product unsalable), and a description of the package to be used for repackaging. The packages to be used must comply with the package, mark, and notice provisions of this chapter applicable to the tobacco products being repackaged. The operations authorized under this section are limited solely to repackaging for good cause by a manufacturer, pursuant to an approved application, of the specified tobacco products in the described packages, and do not include any manufacturing processes. If the regional director (compliance) approves the application, he may assign an ATF officer to supervise the repackaging or he may authorize the manufacturer to repackage the products without supervision by so stating on a copy of the application returned to the manufacturer. Where the manufacturer is authorized to repackage he shall record the date of repackaging on the approved application and retain it as part of his records.

A manufacturer of tobacco products may gratuitously furnish tobacco products, without determination and payment of tax, for personal consumption by employees in the factory in such quantities as desired. Each employee may also be gratuitously furnished by the manufacturer, for off-factory personal consumption, not more than 5 large cigars or cigarettes, 20 small cigars or cigarettes, or one retail package of chewing tobacco, snuff, pipe tobacco or roll-your-own tobacco, or a proportionate quantity of each, without determination and payment of tax, on each day the employee is at work. For the purposes of this section, the term “employee” shall mean those persons whose duties require their presence in the factory of whose duties relate to the manufacture, distribution, or sale of tobacco products and who receive compensation from the manufacturer, or a parent, subsidiary, or auxiliary company or corporation of the manufacturer. Such product furnished for off-factory consumption shall be furnished to the employee within the factory and taken from the factory by the employee on the day for which furnished. Employees shall not sell, offer for sale, or give away products so furnished.

A manufacturer of tobacco products may use tobacco products for experimental purposes without determination and payment of tax as set forth in this section.

(a) What are experimental purposes? Experimental purposes are operations or tests carried out under controlled conditions to discover an unknown scientific principle or fact, to gather or confirm data about a known scientific principle or fact, or to test manufacturing, packaging, or other such equipment. Examples of uses for experimental purposes are:

(1) Use by manufacturers to determine scientific facts relating to tobacco products, such as their chemical content;

(2) Use by producers of packaging machines to test the operation of such machines; and

(3) Use by laboratories, hospitals, medical centers, institutes, colleges, or universities, for scientific, technical, or medical research.

(b) What purposes are not experimental? The uses of tobacco products outside the factory premises for advertising or consumer testing or as salespersons' or customers' samples are not experimental purposes.

(c) Use in factory. A manufacturer of tobacco products may use tobacco products without determination and payment of tax for experimental purposes in a factory.

(d) Use outside factory. A manufacturer may remove tobacco products in bond for experimental purposes outside a factory. When tobacco products are shipped for experimental purposes outside the factory, the proprietor of the factory remains liable for the taxes imposed by 26 U.S.C. 5701 until the occurrence of one of the following events:

(1) The tobacco products are returned to the premises of the factory from which they were shipped; or

(2) The tobacco products are destroyed during or after their use for experimental purposes.

(e) Record of use. In addition to the records prescribed by § 40.183, a manufacturer who removes tobacco products in bond for experimental purposes outside a factory must prepare and maintain a record containing the following information:

(1) Name and address of the consignee;

(2) Kind and quantity of tobacco products removed;

(3) Description of packaging, if any, of the tobacco products removed;

(4) Description of how and when the consignee will use the tobacco products; and

(5) Disposition of any remaining tobacco products after the consignee's use.

A manufacturer of tobacco products may transfer tobacco products in bond, to the factory of any manufacturer of tobacco products. The transfer of tobacco products in bond to the premises of an export warehouse proprietor shall be in accordance with the provisions of part 44 of this chapter. Tobacco products are not eligible for transfer in bond to a manufacturer of tobacco products or to an export warehouse unless they bear all required marks, labels, or notices.

The removal of tobacco products in bond, for use of the United States, shall be in accordance with the provisions of part 45 of this chapter.

The removal of tobacco products in bond, for shipment to a foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, or for consumption beyond the jurisdiction of the internal revenue laws of the United States, shall be in accordance with the provisions of part 44 of this chapter.

The release of tobacco products from customs custody, in bond, for transfer to the premises of a tobacco products factory, shall be in accordance with the provisions of part 275 of this chapter.

In cases of emergency, the regional director (compliance) may authorize, for a stated period, the temporary storage of tobacco products at a place outside the factory without the application for amended permit required under § 40.114, where such action will not hinder the effective administration of this part, is not contrary to law, and will not jeopardize the revenue. Application for authorization to so store tobacco products shall be submitted to the regional director (compliance) by letter, in duplicate. All tobacco products so stored outside the factory shall be accounted for in the records and reports required under §§ 40.183 and 40.202 the same as products within the factory.

A manufacturer may reduce tobacco products to materials without supervision. If the tobacco products have been entered in the factory record as manufactured or received, an entry shall be made in such record of the quantity of pipe tobacco or roll-your-own tobacco and the kind and quantity of cigars, cigarettes, and smokeless tobacco reduced to materials and of the quantity of tobacco resulting from the reduction. Where the manufacturer intends to file claims for credit allowance, or refund of tax on such tobacco products, he shall comply with the provisions of §§ 40.311 and 40.313.

When a manufacturer of tobacco products desires to destroy tobacco products which have been entered in the factory record as manufactured or received, without salvaging the tobacco, he shall notify the regional director (compliance) by letter, in duplicate, of the kind and quantity of tobacco products to be destroyed, the intended method of destruction, and the date on which he desires to destroy such products. The regional director (compliance) may assign an ATF officer to supervise destruction of the tobacco products or he may authorize the manufacturer to destroy such products without supervision by so stating on a copy of the manufacturer's notice returned to the manufacturer. When so authorized by the regional director (compliance), the manufacturer shall destroy the tobacco products by burning completely or by rendering them unfit for consumption. Upon completion of the destruction, the manufacturer shall make an entry of such destruction in his factory record, and where destruction without supervision is authorized, shall record the date and method of destruction on the notice returned to him by the regional director (compliance), which notice the manufacturer shall retain. Where the manufacturer intends to file claim for credit, allowance, or refund of tax on such products he shall comply with the provisions of §§ 40.311 and 40.313.

A manufacturer of tobacco products may receive in bond into his factory tobacco products and may also receive into his factory tobacco products on which the tax has been determined (including products on which the tax has been paid). Cigars and cigarettes on which the tax has been determined which are so received shall be segregated and identified as products on which the tax has been determined. If tax determined products received into the factory are so handled that they cannot be identified both physically and in the records as tax determined products they shall be accounted for as returned to bond and upon subsequent removal shall be tax determined. Where returned tax determined tobacco products are to be repackaged without being returned to bond the manufacturer shall make application for authorization to do so to the regional director (compliance) in accordance with § 40.217. Where the manufacturer intends to file claim for credit, allowance, or refund of tax on tax determined products he shall comply with the provisions of §§ 40.311 and 40.313.

A claim for abatement of the unpaid portion of the assessment of any tax on tobacco products or any liability in respect thereof, may be allowed to the extent that such assessment is excessive in amount, is assessed after expiration of the applicable period of limitation, or is erroneously or illegally assessed. Any claim under this section shall be prepared on Form 2635 (5620.8), in duplicate, and shall set forth the particulars under which the claim is filed. The original of the claim, accompanied by such evidence as is necessary to establish to the satisfaction of the regional director (compliance) that the claim is valid, shall be filed with the regional director (compliance) for the region in which the tax or liability was assessed, and the duplicate of the claim shall be retained by the manufacturer.

Relief from the payment of tax on tobacco products may be extended to a manufacturer by allowance of the tax where the tobacco products after removal from the factory upon determination of tax and prior to the payment of such tax, are lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of the manufacturer who removed such products, or are withdrawn by him from the market. Any claim for allowance under this section shall be filed on Form 2635, in duplicate, with the regional director (compliance) for the region in which the products were removed, and shall show the date the tobacco products were removed from the factory. A claim relating to products lost or destroyed shall be supported as prescribed in § 40.301. In the case of a claim relating to tobacco products withdrawn from the market the schedule prescribed in § 40.311 shall be filed with the regional director (compliance) for the region in which the products are assembled. The manufacturer may not anticipate allowance of his claim by making the adjusting entry in a tax return pending consideration and action on the claim. Tobacco products to which such a claim relates must be shown as removed on determination of tax in the return covering the period during which such products were so removed. Upon action on the claim by the regional director (compliance) he will return the copy of Form 2635 to the manufacturer as notice of such action, which copy, with the copy of any verified supporting schedules, shall be retained by the manufacturer. When such notification of allowance of the claim or any part thereof is received prior to the time the return covering the tax on the tobacco products to which the claim relates is to be filed, the manufacturer may make an adjusting entry and explanatory statement in that tax return. Where the notice of allowance is received after the filing of the return and taxpayment of the tobacco products to which the claim relates, the manufacturer may make an adjusting entry and explanatory statement in the next tax return(s) to the extent necessary to take credit in the amount of the allowance.

The taxes paid on tobacco products may be credited or refunded (without interest) to a manufacturer on proof satisfactory to the regional director (compliance) that the claimant manufacturer paid the tax on tobacco products lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of such manufacturer, or withdrawn by him from the market. Any claim for credit or refund under this section shall be prepared on Form 2635 (5620.8), in duplicate. Claims shall include a statement that the tax imposed on tobacco products by 26 U.S.C. 7652 or chapter 52, was paid in respect to the tobacco products covered by the claim, and that the products were lost, destroyed, or withdrawn from the market within 6 months preceding the date the claim is filed. A claim for credit or refund relating to products lost or destroyed shall be supported as prescribed in § 40.301, and a claim relating to products withdrawn from the market shall be accompanied by a schedule prepared and verified as prescribed in §§ 40.311 and 40.313. The original and one copy of Form 2635 (5620.8), claim for credit, or the original of Form 2635 (5620.8), claim for refund, shall be filed with the regional director (compliance) for the region in which the tax was paid, or where the tax was paid in more than one region with the regional director (compliance) for any one of the regions in which the tax was paid. Upon action by the regional director (compliance) on a claim for credit he will return the copy of Form 2635 to the manufacturer as notification of allowance or disallowance of the claim or any part thereof, which copy, with the copy of any verified supporting schedules, shall be retained by the manufacturer. When the manufacturer is notified of allowance of the claim for credit or any part thereof he shall make an adjusting entry and explanatory statement in the next tax return(s) to the extent necessary to take credit in the amount of the allowance. Prior to consideration and action on his claim the manufacturer may not anticipate allowance of his claim by taking credit in his tax return. The duplicate of a claim for refund, with the copy of any verified supporting schedules, shall be retained by the manufacturer.

Remission of the tax liability on tobacco products may be extended to the manufacturer liable for the tax where tobacco products in bond are lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of such manufacturer. Where tobacco products are so lost or destroyed the manufacturer shall report promptly such fact, and the circumstances, to the regional director (compliance) for the region in which the factory is located. If the manufacturer wishes to be relieved of the tax liability thereon he shall also prepare a claim on Form 2635, in duplicate, setting forth the nature, date, place, and extent of the loss or destruction. Both copies of the claim, accompanied by such evidence as is necessary to establish to the satisfaction of the regional director (compliance) that the claim is valid, shall be filed with the regional director (compliance) for the region in which the factory is located. Upon action on the claim by the regional director (compliance) he will return the copy of Form 2635 to the manufacturer as notice of such action, which copy shall be retained by the manufacturer.

Where an error in computation of the quantity of tobacco products or in computation of the amount of tax due results in an overpayment and such error is specifically identified and supported by records, the manufacturer may file claim for refund or may make an adjustment in his semimonthly tax return as provided in § 40.164. (Section 6511, 26 U.S.C., provides that, in most cases, any adjustment of claim for refund of an overpayment of tax on tobacco products must be made or filed within three years after the tax is paid.) If the manufacturer elects to file a claim for refund of an overpayment resulting from such a computational error, he shall do so on Form 2635 (5620.8), in duplicate. The original shall be filed with the regional director (compliance) for the region in which the tax was paid, and the duplicate retained by the manufacturer. Where an overpayment of tax on tobacco products results from other than a computational error any claim for refund or credit shall be made in accordance with subpart A of part 46 of this chapter.

Whenever a manufacturer of tobacco products desires to submit a claim for remission of tax liability on shortages of tobacco products in bond, disclosed by physical inventory as set forth in § 40.255, he shall prepare such claim on Form 2635, in duplicate. Both copies of the claim shall be filed with the regional director (compliance) for the region in which the factory is located. The claim shall specify the quantities of tobacco products on which claim is made and the tax liability in respect thereof, and shall set forth the circumstances surrounding the shortage and the reason the manufacturer believes tax is not due or payable. The regional director (compliance) will, after such investigation as he deems appropriate, allow the claim to the extent he is satisfied the shortage was due to operating losses such as damage during grading, sorting, or packaging, and was not caused by theft or other unlawful or improper removal. Upon action on the claim by the regional director (compliance) he will return the copy of Form 2635 to the manufacturer as notice of such action, which copy shall be retained by the manufacturer.

Where tobacco products are lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, and the manufacturer desires to file a claim for the tax on such products under the provisions of § 40.282 or § 40.283, he shall indicate on the claim the nature, date, place, and extent of such loss or destruction. The claim shall be accompanied by such evidence as is necessary to establish to the satisfaction of the regional director (compliance) that the claim is valid.

(a) General. Where tobacco products are withdrawn from the market and the manufacturer desires to file claim under the provisions of § 40.282 or § 40.283, he shall assemble the products in or adjacent to a factory if they are to be returned to bond or at any suitable place if they are to be destroyed or reduced to materials. The manufacturer shall group the products according to the rates of tax applicable to the products, and shall prepare a schedule of the products, on ATF Form 5200.7, in triplicate. All copies of the schedule shall be forwarded to the regional director (compliance) for the region in which the products are assembled.

(b) Large cigars. Refund or credit of tax on large cigars withdrawn from the market is limited to the lowest tax paid on that brand and size of cigar during the required record retention period (see § 40.185), except where the manufacturer establishes that a greater amount was actually paid. For each claim involving large cigars withdrawn from the market, the manufacturer must include a certification on either Form 5200.7 or Form 2635 (5620.8) to read as follows:

Upon receipt of a schedule of tobacco products withdrawn from the market, the regional director (compliance) may assign an ATF officer to verify the schedule and supervise disposition of the tobacco products (and destruction of the stamps, if any), or he may authorize the manufacturer to dispose of the products (and destroy the stamps, if any) without supervision by so stating on the original and one copy of the schedule returned to the manufacturer.

When so authorized, as evidenced by the regional director's (compliance) statement on the schedule, the manufacturer shall dispose of the tobacco products (and destroy the stamps, if any) as specified in the schedule. After the manufacturer has disposed of the products (and destroyed the stamps, if any), he shall execute a certificate on both copies of the schedule returned to him by the regional director (compliance), to show the disposition and the date of disposition of the products (and stamps, if any). In connection with a claim for allowance the manufacturer then shall return the original of the schedule to the regional director (compliance) who authorized such disposition, who will cause such schedule to be associated with the claim, Form 2635 (5620.8), filed under § 40.282. In connection with a claim for credit or refund the manufacturer shall attach the original of the schedule to his claim for credit, Form 2635 (5620.8), or claim for refund, Form 2635 (5620.8), filed under § 40.283. When an ATF officer is assigned to verify the schedule and supervise disposition of the tobacco products, such officer shall, upon completion of his assignment, execute a certificate on all copies of the schedule to show the disposition and the date of disposition of the products. In connection with a claim for allowance the officer shall return one copy of the schedule to be included in the manufacturers records, and in connection with a claim for credit or refund, the officer shall return the original and one copy of the schedule to the manufacturer, the original of which the manufacturer shall attach to the claim, Form 2635 (5620.8), filed under § 40.283.

(a) Manufacturer of cigarette papers and tubes. Every manufacturer of cigarette papers and tubes shall pay a special (occupational) tax at a rate specified by § 40.372 of this part. The tax shall be paid on or before July 1. On commencing business, the tax shall be computed from the first day of the month in which liability is incurred, through the following June 30. Thereafter, the tax shall be computed for the entire year (July 1 through June 30).

(b) Each place of business taxable. A manufacturer of cigarette papers and tubes incurs special tax liability at each place of business in which an occupation subject to special tax is conducted. A place of business means the entire office, plant or area of the business in any one location under the same proprietorship. Passageways, streets, highways, rail crossings, waterways, or partitions dividing the premises are not sufficient separation to require additional special tax, if the divisions of the premises are otherwise contiguous.

(a) General. Title 26 U.S.C. 5731(a)(2) imposes a special tax of $1,000 per year on every manufacturer of cigarette papers and tubes.

(b) Reduced rate for small proprietors. Title 26 U.S.C. 5731(b) provides for a reduced rate of $500 per year with respect to any manufacturer of cigarette papers and tubes whose gross receipts (for the most recent taxable year ending before the first day of the taxable period to which the special tax imposed by § 40.371 relates) are less than $500,000. The “taxable year” to be used for determining gross receipts is the taxpayer's income tax year. All gross receipts of the taxpayer shall be included, not just the gross receipts of the business subject to special tax. Proprietors of new businesses that have not yet begun a taxable year, as well as proprietors of existing businesses that have not yet ended a taxable year, who commence a new activity subject to special tax, qualify for the reduced special (occupational) tax rate, unless the business is a member of a “controlled group”; in that case the rules of paragraph (c) of this section shall apply.

(c) Controlled group. All persons treated as one taxpayer under 26 U.S.C. 5061(e)(3) shall be treated as one taxpayer for the purpose of determining gross receipts under paragraph (b) of this section. “Controlled group” means a controlled group of corporations, as defined in 26 U.S.C. 1563 and implementing regulations in 26 CFR 1.1563-1 through 1.1563-4. Also, the rules for a “controlled group of corporations” apply in a similar fashion to groups which include partnerships and/or sole proprietorships. If one entity maintains more than 50% control over a group consisting of corporations and one, or more, partnerships and/or sole proprietorships, all of the members of the controlled group are one taxpayer for the purpose of this section.

(d) Short taxable year. Gross receipts for any taxable year of less than 12 months shall be annualized by multiplying the gross receipts for the short period by 12 and dividing the result by the number of months in the short period as required by 26 U.S.C. 448(c)(3).

(e) Returns and allowances. Gross receipts for any taxable year shall be reduced by returns and allowances made during such year under 26 U.S.C. 448(c)(3).

(a) General. Special tax shall be paid by return. The prescribed return is ATF Form 5630.5, Special Tax Registration and Return. Special tax returns, with payment of tax, shall be filed with ATF in accordance with instructions on the form.

(b) Preparation of ATF Form 5630.5. All of the information called for on ATF Form 5630.5 shall be provided including:

(1) The true name of the taxpayer.

(2) The trade name(s) (if any) of the business(es) subject to special tax.

(3) The employer identification number (see §§ 40.359-361).

(4) The exact location of the place of business, by name and number of building or street, or if these do not exist, by some description in addition to the post office address. In the case of one return for two or more locations, the address to be shown shall be the taxpayer's principal place of business (or principal office, in the case of a corporate taxpayer).

(5) The class(es) of special tax to which the taxpayer is subject.

(6) Ownership and control information: That is, the name, position, and residence address of every owner of the business and of every person having power to control its management and policies with respect to the activity subject to special tax. “Owner of the business” shall include every partner, if the taxpayer is a partnership, and every person owning 10% or more of its stock, if the taxpayer is a corporation. However, the ownership and control information required by this paragraph need not be stated if the same information has been previously provided to ATF in connection with a permit application, and if the information previously provided is still current.

(c) Multiple locations and/or classes of tax.

A taxpayer subject to special tax for the same period at more than one location or for more than one class of tax shall—

(1) File one special tax return, ATF Form 5630.5, with payment of tax, to cover all such locations and classes of tax; and

(2) Prepare, in duplicate, a list identified with the taxpayer's name, address (as shown on ATF Form 5630.5), employer identification number, and period covered by the return. The list shall show, by State, the name, address, and tax class of each location for which special tax is being paid. The original of the list shall be filed with ATF in accordance with instructions on the return, and the copy shall be retained at the taxpayer's principal place of business (or principal office, in the case of a corporate taxpayer) for the period specified in § 40.371.

(d) Signing of ATF Forms 5630.5—(1) Ordinary returns. The return of an individual proprietor shall be signed by the individual. The return of a partnership shall be signed by a general partner. The return of a corporation shall be signed by any officer. In each case, the person signing the return shall designate his or her capacity as “individual owner,” “member of firm,” or, in the case of a corporation, the title of the officer.

(2) Fiduciaries. Receivers, trustees, assignees, executors, administrators, and other legal representatives who continue the business of a bankrupt, insolvent, deceased person, etc., shall indicate the fiduciary capacity in which they act.

(3) Agent or attorney in fact. If a return is signed by an agent or attorney in fact, the signature shall be preceded by the name of the principal and followed by the title of the agent or attorney in fact. A return signed by a person as agent will not be accepted unless there is filed, with the ATF office with which the return is required to be filed, a power of attorney authorizing the agent to perform the act.

(4) Perjury statement. ATF Forms 5630.5 shall contain or be verified by a written declaration that the return has been executed under the penalties of perjury.

(a) Issuance of special tax stamps. Upon filing a properly executed return on ATF Form 5630.5 together with the full remittance, the taxpayer will be issued an appropriately designated special tax stamp. If the return covers multiple locations, the taxpayer will be issued one appropriately designated stamp for each location listed on the attachment required by § 40.373(c)(2), but showing, as to name and address, only the name of the taxpayer and the address of the taxpayer's principal place of business (or principal office in the case of a corporate taxpayer).

(b) Distribution of special tax stamps for multiple locations. On receipt of the special tax stamps, the taxpayer shall verify that there is one stamp for each location listed on the attachment to ATF Form 5630.5. The taxpayer shall designate one stamp for each location and type on each stamp the address of the business conducted at the location for which that stamp is designated. The taxpayer shall then forward each stamp to the place of business designated on the stamp.

(c) Examination of special tax stamps. All stamps denoting payment of special tax shall be kept available for inspection by ATF officers, at the location for which designated, during business hours.

(a) Change in name. If there is a change in the corporate or firm name, or in the trade name, as shown on ATF Form 5630.5, the manufacturer shall file an amended special tax return as soon as practicable after the change, covering the new corporate or firm name, or trade names. No new special tax is required to be paid. The manufacturer shall attach the special tax stamp for endorsement of the change in name.

(b) Change in proprietorship.—(1) General. If there is a change in the proprietorship of a cigarette papers and tubes factory, the successor shall pay a new special tax and obtain the required special tax stamps.

(2) Exemption for certain successors. Persons having the right of succession provided for in paragraph (c) of this section may carry on the business for the remainder of the period for which the special tax was paid, without paying a new special tax, if within 30 days after the date on which the successor begins to carry on the business, the successor files a special tax return on ATF Form 5630.5 with ATF, which shows the basis of succession. A person who is a successor to a business for which special tax has been paid and who fails to register the succession is liable for special tax computed from the first day of the calendar month in which the successor began to carry on the business.

(c) Persons having right of succession. Under the conditions indicated in paragraph (b)(2) of this section, the right of succession will pass to certain persons in the following cases:

(1) Death. The spouse or child, or executor, administrator, or other legal representative of the taxpayer;

(2) Succession of spouse. A husband or wife succeeding to the business of his or her spouse (living);

(3) Insolvency. A receiver or trustee in bankruptcy, or an assignee for benefit of creditors;

(4) Withdrawal from firm. The partner or partners remaining after death or withdrawal of a member.

(d) Change in location. If there is a change in location of a taxable place of business, the manufacturer shall within 30 days after the change, file with ATF an amended special tax return covering the new location. The manufacturer shall attach the special tax stamp or stamps for endorsement of the change in location. No new special tax is required to be paid. However, if the manufacturer does not file the amended return within 30 days, the manufacturer is required to pay a new special tax and obtain a new special tax stamp.

Any ATF officer may enter in the daytime any premises where cigarette papers and tubes are produced or kept, so far as it may be necessary for the purpose of examining such articles. When such premises are open at night, any ATF officer may enter them, while so open, in the performance of his or her official duties. The owner of such premises, or person having the superintendence of the same, who refuses to admit any ATF officer or permit any AFT officer to examine such cigarette papers and tubes shall be liable to the penalties prescribed by law for the offense.

Whoever, corruptly or by force or threats of force, endeavors to hinder or obstruct the administration of this subpart, or endeavors to intimidate or impede any ATF officer acting in an official capacity, or forcibly rescues or attempts to rescue or causes to be rescued any property, after it has been duly seized for forfeiture to the United States in connection with a violation or intended violation of this subpart, shall be liable to the penalties prescribed by law.

Forfeited, condemned, or abandoned cigarette papers or tubes in the custody of a Federal, State, or local officer upon which the Federal tax has not been paid shall not be sold or caused to be sold for consumption in the United States if, in the opinion of the officer, the sale of such papers and tubes will not bring a price equal to the tax due and payable, and the expenses incident to the sale. Where the cigarette papers or tubes are not sold the officer may deliver them to a Federal or State institution (if they are fit for consumption) or cause their destruction by burning completely or by rendering them unfit for consumption. Where such papers or tubes are sold, release by the officer having custody shall be made only after such papers and tubes are properly packaged and taxpaid. A receipt from the regional director (compliance) evidencing payment of tax on such papers or tubes shall be presented to the officer having custody of the articles, which tax shall be considered part of the sales price. Where cigarette papers or tubes which have been packaged under the provisions of part 45 of this chapter are to be released after payment of tax, the purchaser shall appropriately mark each package “Federal Tax Paid (date)” before the officer having custody of the papers or tubes releases them. However, the articles may be released without such marking of the packages if the purchaser is a qualified manufacturer of cigarette papers and tubes and does not intend to place such papers or tubes on the domestic market for taxable articles but will otherwise dispose of them. A written statement of notification of disposal by destruction or return to bond through claim for refund, shall be filed, in original only, with the officer having custody of the articles. In the case of cigarette papers and tubes forfeited under the internal revenue laws, the sale shall be subject to the provisions of part 72 of this chapter.

A manufacturer of cigarette papers and tubes, on specific approval by the Director as provided in this section, may use an alternate method or procedure in lieu of a method or procedure specifically prescribed in this subpart. The Director may approve an alternate method or procedure, subject to stated conditions, when the Director finds that—

(a) Good cause has been shown for the use of the alternate method or procedure,

(b) The alternate method or procedure is within the purpose of, and consistent with the effect intended by, the specifically prescribed method or procedure, and affords equivalent security to the revenue, and

(c) The alternate method or procedure will not be contrary to any provision of law, and will not result in an increase in cost to the Government or hinder the effective administration of this subpart.

No alternate method or procedure relating to the giving of any bond or to the assessment, payment, or collection of tax, shall be authorized under this section. A manufacturer who desires to employ an alternate method or procedure shall submit a written application, in triplicate, to the regional director (compliance) for transmittal to the Director. The application shall specifically describe the proposed alternate method or procedure, and shall set forth the reasons therefor. Alternate methods or procedures shall not be employed until the application has been approved by the Director. The manufacturer shall, during the period of authorization of an alternate method or procedure, comply with the terms of the approved application. Authorization for any alternate method or procedure may be withdrawn whenever, in the judgment of the Director, the revenue is jeopardized or the effective administration of this part is hindered. Any authorization of the Director under this section shall be retained as part of the manufacturer's record in accordance with this subpart.

The Director may approve methods of operation other than as specified in this subpart, where it is determined that an emergency exists and the proposed variations from the specified requirements are necessary, and the proposed variations—

(a) Will afford the security and protection to the revenue intended by the prescribed specifications;

(b) Will not hinder the effective administration of this subpart; and

(c) Will not be contrary to any provision of law. Variations from requirements granted under this section are conditioned on compliance with the procedures, conditions, and limitations set forth in the approval of the application. Failure to comply in good faith with such procedures, conditions and limitations shall automatically terminate the authority for such variations and the manufacturer thereupon shall fully comply with the prescribed requirements of regulations from which the variations were authorized. Authority for any variation may be withdrawn whenever in the judgment of the Director the revenue is jeopardized or the effective administration of this subpart is hindered by the continuation of such variation. Where a manufacturer desires to employ such variation, the manufacturer shall submit a written application to do so (in triplicate) to the regional director (compliance) for transmittal to the Director. The application shall describe the proposed variations and set forth the reasons therefor. Variations shall not be employed until the application has been approved. In accordance with this subpart, any authorization of the Director under this section shall be retained as part of the manufacturer's records.

Every person who manufactures cigarette paper, or makes up cigarette paper into tubes, except for his own personal use or consumption, must first qualify as a manufacturer of cigarette papers and tubes in accordance with the provisions of this subpart.

Every person, before commencing business as a manufacturer of cigarette papers and tubes, shall file a bond on ATF Form 2102 (5210.1). Such bond shall be filed in accordance with the applicable provisions of subpart G of this part and conditioned upon compliance with the provisions of 26 U.S.C. Chapter 52, and regulations thereunder, including, but not limited to, the timely payment of taxes imposed by such chapter and penalties and interest in connection therewith for which the manufacturer may become liable to the United States.

If the bond or any other document required under this part is signed by an attorney in fact for an individual, partnership, association, company, or corporation, by one of the partners for a partnership, or by one of the members of an association, a power of attorney on ATF Form 1534 (5000.8) shall be furnished to the regional director (compliance). If such bond or other document is signed on behalf of a corporation by an officer thereof, it must be supported by duly authenticated extracts of the stockholders' meeting, by-laws, or directors' meeting authorizing such officer to execute such document for the corporation. ATF Form 5000.8 or support of authority does not have to be filed again with a regional director (compliance) where such form or support has previously been submitted to that regional director (compliance) and is still in effect.

If the bond required under this subpart is approved by the regional director (compliance), a number will be assigned to the factory of the manufacturer of cigarette papers and tubes for internal revenue purposes. The regional director (compliance) will immediately notify the manufacturer, in writing, of the bond approval, in order that the manufacturer may commence operations.

Where there is a change in the individual, trade, or corporate name of a manufacturer of cigarette papers and tubes, the manufacturer shall, within 30 days of the change, furnish the regional director (compliance) a written notice of such change.

Where there is to be any change in proprietorship (including a change in the identity of the members of a partnership or association, but excluding any change in stock ownership in a corporation) of the business of a manufacturer of cigarette papers and tubes, the proposed successor shall, before commencing operations, qualify as a manufacturer of cigarette papers and tubes, in accordance with this part. If such manufacturer promptly files the required documentation with the regional director (compliance), an administrator, executor, receiver, trustee, assignee, or other fiduciary successor may liquidate the business without qualifying as a manufacturer. The manufacturer must promptly file with the regional director (compliance) a statement of the intent to liquidate and furnish a certified copy of the order of the court, or other pertinent documents. These documents must show the appointment and qualification of any administrator, executor, receiver, trustee, assignee, or other fiduciary, together with an extension of coverage of the predecessor's bond executed by the administrator, executor, receiver, trustee, assignee, or other fiduciary and the surety, in accordance with the provisions of § 40.407. The predecessor shall make a closing inventory and closing report in accordance with the provisions of §§ 40.434 and 40.426, respectively, and the successor shall make an opening inventory and opening report, in accordance with the provision of §§ 40.432 and 40.423, respectively.

Whenever a manufacturer of cigarette papers and tubes contemplates a change in location of a factory within the same region, the manufacturer shall, before commencing operations at the new location, file an extension of coverage of bond in accordance with the provisions of § 40.407. Whenever a manufacturer of cigarette papers and tubes contemplates changing the location of a factory to another region, the manufacturer shall, before commencing operations at the new location, qualify as a manufacturer in the new region, in accordance with the applicable provisions of this subpart, and make a closing inventory and closing report, in accordance with the provisions of §§ 40.434 and 40.426, respectively.

(a) Surety bonds required by this subpart may be given only with corporate sureties holding certificates of authority from, and subject to any limitations prescribed by the Secretary of the Treasury as set forth in the current revision of Treasury Department Circular No. 570 (Companies Holding Certificates of Authority as Acceptable Sureties on Federal Bonds and as Acceptable Reinsuring Companies). The surety shall have no interest whatever in the business covered by the bond.

(b) Each bond and each extension of coverage of bond shall at the time of filing be accompanied by a power of attorney authorizing the agent or officer who executed the bond to so act on behalf of the surety. The regional director (compliance) who is authorized to approve the bond may, whenever deemed necessary, require additional evidence of the authority of the agent or officer to execute the bond or extension of coverage of bond. The power of attorney shall be prepared on a form provided by the surety company and executed under the corporate seal of the company. If the power of attorney submitted is other than a manually signed document, it shall be accompanied by a certificate of its validity.

(c) Treasury Department Circular No. 570 is published in the Federal Register annually as of the first workday in July. As they occur, interim revisions of the circular are published in the Federal Register. Copies may be obtained from the Surety Bond Branch, Financial Management Service, Department of the Treasury, Washington, D.C. 20220.

A bond executed by two or more corporate sureties shall be the joint and several liability of the principal and the sureties. However, each corporate surety may limit its liability in terms upon the face of the bond in a definite, specific amount, which amount shall not exceed the limitations prescribed for such corporate surety by the Secretary, as set forth in the current revision of Treasury Department Circular 570 (Companies Holding Certificates of Authority as Acceptable Sureties on Federal Bonds and as Acceptable Reinsuring Companies). (See § 40.401(c)) When the sureties so limit their liability, the aggregate of such limited liabilities must equal the required amount of the bond.

In lieu of corporate surety, the manufacturer of cigarette papers and tubes may pledge and deposit, as security for the bond, securities which are transferable and are guaranteed as to both interest and principal by the United States, in accordance with the provisions of 31 CFR Part 225—Acceptance of Bonds, Notes or Other Obligations Issued or Guaranteed by the United States as Security in Lieu of Surety or Sureties on Penal Bonds.

The amount of the bond of a manufacturer of cigarette papers and tubes shall be not less than the maximum amount of the tax liability on the cigarette papers and tubes manufactured in the factory, received without payment of tax from other factories, and released without payment of tax from customs custody as provided in § 40.452, during any month. In the case of a manufacturer commencing business, the production, receipts from other factories, and releases from customs custody, without payment of tax, shall be estimated for the purpose of this section. The amount of any such bond (or the total amount where strengthening bonds are filed) shall not exceed $20,000, nor be less than $1,000.

Where the regional director (compliance) determines that the amount of the bond, under which a manufacturer of cigarette papers and tubes is currently carrying on such business, no longer adequately protects the revenue, the regional director (compliance) may require the manufacturer to file a strengthening bond in an appropriate amount with the same surety as that on the bond already in effect, in lieu of a superseding bond to cover the full liability on the basis of § 40.404. The regional director (compliance) shall refuse to approve any strengthening bond where any notation is made thereon which is intended or which may be construed as a release of any former bond, or as limiting the amount of either bond to less than its full amount.

A manufacturer of cigarette papers and tubes shall file a new bond to supersede the current bond immediately when:

(a) The corporate surety on the current bond becomes insolvent,

(b) The regional director (compliance) approves a request from the surety of the current bond to terminate liability under the bond,

(c) Payment of any liability under a bond is made by the surety thereon, or

(d) The regional director (compliance) considers such a superseding bond necessary for the protection of the revenue.

An extension of the coverage of bond filed under this subpart shall be manifested on ATF Form 2105 (5000.7), Extension of Coverage of Bond, by the manufacturer of cigarette papers and tubes and by the surety on the bond with the same formality and proof of authority as required for the execution of the bond.

No person shall commence operations under any bond, nor extend operations, until such person receives from the regional director (compliance) notice of approval of the bond or an appropriate extension of coverage of the bond required under this subpart. Upon receipt of an approved bond or extension of coverage of bond from the regional director (compliance), such bond or extension of coverage of bond shall be retained by the manufacturer of cigarette papers and tubes in factory and shall be made available for inspection by any ATF officer upon request.

The liability of a surety on any bond required by this subpart shall be terminated only as to operations on and after the effective date of a superseding bond, or the date of approval of the discontinuance of operations by the manufacturer of cigarette papers and tubes, or otherwise in accordance with the termination provisions of the bond. The surety shall remain bound in respect of any liability for unpaid taxes, penalties and interest, not in excess of the amount of the bond, incurred by the manufacturer while the bond is in force.

Securities of the United States pledged and deposited as provided in § 40.403 shall be released only in accordance with the provisions of 31 CFR part 225. Such securities will not be released by the regional director (compliance) until liability under the bond for which they were pledged has been terminated. When the regional director (compliance) is satisfied that they may be released, the regional director (compliance) shall fix the date or dates on which a part or all of such securities may be released. At any time prior to the release of such securities, the regional director (compliance) may extend the date of release for such additional length of time as is deemed necessary.

(a) Every manufacturer of cigarette papers and tubes must keep records of daily operations and transactions. Records maintained must reflect the date and number of cigarette papers and the date and number of cigarette tubes:

(1) Manufactured;

(2) Received, without payment of tax from another factory, an export warehouse, customs custody, or by withdrawal from the market;

(3) Removed, subject to tax;

(4) Removed, without payment of tax, for export purposes, use of the United States or transfer in bond pursuant to § 40.451; or

(5) Lost or destroyed.

(b) The entries for each day in the records maintained or kept under this subpart must be made by the close of the business day following that on which the operations or transactions occur. No particular form of records is prescribed, but the information required must be readily ascertainable from the records kept.

(c) Records maintained under this section prior to January 1, 2000, must reflect the date and number of books or sets of cigarette papers of each different numerical content and the date and number of cigarette tubes.

Every manufacturer of cigarette papers and tubes must prepare a report on ATF Form 5230.3 in accordance with instructions for the form. The report must be prepared at the times specified in this subpart and must be prepared whether or not any operations or transactions occurred during the period covered by the report. The manufacturer must retain a copy of each report in accordance with the provisions of this subpart.

(a) Reports for periods on or after January 1, 2000. Reports submitted must reflect the total number of cigarette papers and cigarette tubes manufactured, received and lost or destroyed.

(b) Reports for periods prior to January 1, 2000. Reports submitted must reflect the number of books or sets of cigarette papers of each different numerical content and the number of cigarette tubes manufactured, received, removed and lost or destroyed.

An opening report, covering the period from the date of the opening inventory to the end of the month, shall be made on or before the 10th day following the end of the month in which the business was commenced.

A report for each calendar month shall be made on or before the 20th day of the next succeeding month.

A special report, covering the unreported period to the day preceding the date of any special inventory required by an ATF officer, shall be made with such inventory. Another report, covering the period from the date of the special inventory to the end of the month, shall be made on or before the 14th day following the end of the month in which the inventory was made.

A closing report, covering the period from the first of the month to the date of the closing inventory, shall be made with such inventory.

Every manufacturer of cigarette papers and tubes must provide a true and accurate inventory on ATF Form 5230.2 in accordance with instructions for the form. Such inventory is subject to verification by an ATF officer. The manufacturer must retain a copy of each inventory completed on ATF Form 5230.2 in accordance with this subpart.

(a) Reports of inventory for periods on or after January 1, 2000. Reports of inventory submitted must reflect the total number of cigarette papers and cigarette tubes held at the times specified in the subpart.

(b) Reports of inventory for periods prior to January 1, 2000. Reports of inventory submitted must reflect the number of books or sets of cigarette papers of each different numerical content and the number of cigarette tubes held at the times specified in this subpart.

An opening inventory shall be made by the manufacturer of cigarette papers and tubes at the time of first commencing business.

A special inventory shall be made by the manufacturer of cigarette papers and tubes when required by any ATF officer.

A closing inventory shall be made by the manufacturer of cigarette papers and tubes when a change in proprietorship occurs, or when the manufacturer changes location of the factory to another region, or concludes business. Where a change in proprietorship occurs, the closing inventory shall be made as of the day preceding the date of the opening inventory of the successor.

All records and reports required to be kept or maintained under this subpart, including copies of authorizations, inventories, reports, returns, and claims filed with verified supporting schedules, shall be retained by the manufacturer for three years following the close of the calendar year in which filed or made, or in the case of an authorization, for three years following the close of the calendar year in which the operation under such authorization is concluded. Such records shall be made available for inspection by any ATF officer upon request.

All cigarette papers and tubes shall, before removal subject to tax, be put up by the manufacturer in packages which shall be of such construction as will securely contain the papers or tubes therein. No package of cigarette papers or tubes shall have contained therein, attached thereto, or stamped, marked, written, or printed thereon:

(a) Any certificate, coupon, or other device purporting to be or to represent a ticket, chance, share, or an interest in, or dependent on, the event of a lottery,

(b) Any indecent or immoral picture, print, or representation, or

(c) Any statement or indication that United States tax has been paid.

A manufacturer of cigarette papers and tubes may transfer such papers and tubes, under bond, without payment of tax, to the bonded premises of any manufacturer of cigarette papers and tubes, or to the bonded premises of a manufacturer of tobacco products solely for use in the manufacture of cigarettes. The transfer of cigarette papers and tubes, without payment of tax, to the bonded premises of an export warehouse proprietor shall be in accordance with the provisions of part 44 of this chapter.

Cigarette papers and tubes which were made in the United States, exported, and subsequently returned to the United States, may be removed from customs custody for transfer to the premises of a manufacturer without payment of the internal revenue tax, upon compliance with part 275 of this chapter.

A manufacturer of cigarette papers and tubes may remove cigarette papers and tubes covered under bond, without payment of tax, for use of the United States. Such removal shall be in accordance with the provisions of part 45 of this chapter.

The removal of cigarette papers and tubes, without payment of tax, for shipment to a foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, or for consumption beyond the jurisdiction of the internal revenue laws of the United States, shall be in accordance with the provisions of part 44 of this chapter.

Every manufacturer of cigarette papers and tubes who desires to discontinue operations and close out a factory shall dispose of all cigarette papers and tubes on hand, in accordance with this subpart, and make a closing inventory and closing report, in accordance with the provisions of §§ 40.434 and 40.426, respectively.

A claim for abatement of the unpaid portion of the assessment of any tax on cigarette papers and tubes, or any liability in respect thereof, may be allowed to the extent that such assessment is excessive in amount, is assessed after the expiration of the applicable period of limitation, or is erroneously or illegally assessed. Any claim under this section shall be prepared on ATF Form 2635 (5620.8), in duplicate, and shall set forth the particulars under which the claim is filed. The original of the claim, accompanied by such evidence as is necessary to establish to the satisfaction of the regional director (compliance) that the claim is valid, shall be filed with the regional director (compliance) for the region in which the tax or liability was assessed.

Relief from the payment of tax on cigarette papers and tubes may be extended to a manufacturer by allowance of the tax where the cigarette papers and tubes, after removal from the factory upon determination of tax and prior to the payment of such tax, are lost (otherwise than by theft) or destroyed by fire, casualty, or act of God, while in the possession or ownership of the manufacturer who removed such articles, or are withdrawn by the manufacturer from the market. Any claim for allowance under this section shall be filed on ATF Form 2635 (5620.8) with the regional director (compliance) for the region in which the articles were removed, shall be executed under penalties and perjury and shall show the date the cigarette papers and tubes were removed from the factory. A claim relating to articles lost or destroyed shall be supported as prescribed in § 40.475. In the case of a claim relating to cigarette papers or tubes withdrawn from the market the schedule prescribed in § 40.476 shall be filed with the regional director (compliance) for the region in which the articles are assembled. The manufacturer may not anticipate allowance of a claim by making the adjusting entry in a tax return pending consideration and action on the claim. Cigarette papers and tubes to which such a claim relates must be shown as removed on determination of tax in the return covering the period during which such articles were so removed. Upon action on the claim by the regional director (compliance) a copy of ATF Form 2635 (5620.8) will be returned to the manufacturer as notice of such action. This copy of ATF Form 2635 (5620.8), with the copy of any verified supporting schedules, shall be retained by the manufacturer. When such notification of allowance of the claim or any part thereof is received prior to the time the return covering the tax on the cigarette papers or tubes to which the claim relates is to be filed, the manufacturer may make an adjusting entry and explanatory statement in that tax return. Where the notice of allowance is received after the filing of the return and taxpayment of the cigarette papers or tubes to which the claim relates, the manufacturer may make an adjusting entry and explanatory statement in the next tax return(s) to the extent necessary to take credit in the amount of the allowance.

The taxes paid on cigarette papers and tubes may be credited or refunded (without interest) to a manufacturer on proof satisfactory to the regional director (compliance) that the claimant manufacturer paid the tax on cigarette papers and tubes lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of such manufacturer, or withdrawn by the manufacturer from the market. Any claim for credit or refund under this section shall be prepared on ATF Form 2635 (5620.8), in duplicate. Claims shall include a statement that the tax imposed on cigarette papers and tubes by 26 U.S.C. 7652 or Chapter 52, was paid in respect to the cigarette papers or tubes covered by the claim, and that the articles were lost, destroyed, or withdrawn from the market within 6 months preceding the date the claim is filed. A claim for credit or refund relating to articles lost or destroyed shall be supported as prescribed in § 40.475, and a claim relating to articles withdrawn from the market shall be accompanied by a schedule prepared and verified as prescribed in §§ 40.476, and 40.477. The original and one copy of ATF Form 2635 (5620.8), shall be filed with the regional director (compliance) for the region in which the tax was paid, or where the tax was paid in more than one region with the regional director (compliance) for any one of the regions in which the tax was paid. Upon action by the regional director (compliance) on a claim for credit, a copy of ATF Form 2635 (5620.8) will be returned to the manufacturer as notification of allowance or disallowance of the claim or any part thereof. This copy, with the copy of any verified supporting schedules, shall be retained by the manufacturer. When the manufacturer is notified of allowance of the claim for credit or any part thereof, the manufacturer shall make an adjusting entry and explanatory statement in the next tax return(s) to the extent necessary to take credit in the amount of the allowance. The manufacturer may not anticipate allowance of a claim by taking credit on a tax return prior to consideration and action on such claim. The duplicate of a claim for refund or credit, with a copy of any verified supporting schedules, shall be retained by the manufacturer.

Remission of the tax liability on cigarette papers and tubes may be extended to the manufacturer liable for the tax where cigarette papers and tubes in bond are lost (other than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of such manufacturer. Where cigarette papers and tubes are so lost or destroyed the manufacturer shall report promptly such fact, and the circumstances, to the regional director (compliance) for the region in which the factory is located. If the manufacturer wishes to be relieved of the tax liability, a claim on ATF Form 2635 (5620.8), in duplicate, shall also be prepared, setting forth the nature, date, place, and extent of the loss or destruction. The original and one copy of the claim, accompanied by such evidence as is necessary to establish to the satisfaction of the regional director (compliance) that the claim is valid, shall be filed with the regional director (compliance) for the region in which the factory is located. Upon action on the claim by the regional director (compliance), the copy of ATF Form 2635 (5620.8) will be returned to the manufacturer as notice of such action, which copy shall be retained by the manufacturer.

Where cigarette papers and tubes are lost (other than by theft) or destroyed, by fire, casualty, or act of God, and the manufacturer desires to file claim under the provisions of § 40.472 or § 40.473, the manufacturer shall indicate on the claim the nature, date, and extent of such loss or destruction. The claim shall be accompanied by such evidence as necessary to establish to the satisfaction of the regional director (compliance) that the claim is valid.

Where cigarette papers and tubes are withdrawn from the market and the manufacturer desires to file claim under the provisions of § 40.472 or § 40.473, the manufacturer shall assemble the articles in or adjacent to a factory if they are to be retained in or received into such factory, or at any suitable place if they are to be destroyed. The manufacturer shall group the articles according to the rate of tax applicable thereto, and shall prepare and submit a schedule of the articles, on ATF Form 5200.7 in accordance with the instructions, on the form. All copies of the schedule shall be forwarded to the regional director (compliance) for the region in which the articles are assembled.

Upon receipt of a schedule of cigarette papers and tubes withdrawn from the market, the regional director (compliance) may assign an ATF officer to verify the schedule and supervise disposition of the cigarette papers and tubes, or may authorize the manufacturer to dispose of the articles without supervision by so stating on the original and one copy of the schedule returned to the manufacturer.

When so authorized, as evidenced by the regional director's (compliance) statement on the schedule, the manufacturer shall dispose of the cigarette papers and tubes as specified in the schedule. After the articles are disposed of, the manufacturer shall execute a certificate on both copies of the schedule received from the regional director (compliance), to show the disposition and the date of disposition of the articles. In connection with a claim for credit or refund, the manufacturer shall attach the original of the schedule to the claim for credit or refund, ATF Form 2635 (5620.8), filed under § 40.473. When an ATF officer is assigned to verify the schedule and supervise disposition of the cigarette papers and tubes, such officer shall, upon completion of the assignment, execute a certificate on all copies of the schedule to show the disposition and the date of disposition of the articles. In connection with a claim for allowance, the officer shall return one copy of the schedule to the manufacturer for the record, and in connection with a claim for credit or refund, the officer shall return the original and one copy of the schedule to the manufacturer, the original of which the manufacturer shall attach to the claim filed under § 40.473.

A manufacturer of tobacco products, an export warehouse proprietor, or a customs warehouse proprietor, on specific approval by the appropriate ATF officer as provided in this section, may use an alternate method or procedure in lieu of a method or procedure specifically prescribed in this part. The appropriate ATF officer may approve an alternate method or procedure, subject to stated conditions, when he finds that—

(a) Good cause has been shown for the use of the alternate method or procedure.

(b) The alternate method or procedure is within the purpose of, and consistent with the effect intended by, the specifically prescribed method or procedure, and affords equivalent security to the revenue, and

(c) The alternate method or procedure will not be contrary to any provision of law, and will not result in an increase in cost to the Government or hinder the effective administration of this part. No alternate method or procedure relating to the giving of any bond or to the assessment, payment, or collection of tax, shall be authorized under this section. Where a manufacturer or proprietor desires to employ an alternate method or procedure, he shall submit a written application to the appropriate ATF officer. The application shall specifically describe the proposed alternate method or procedure, and shall set forth the reasons therefor. Alternate methods or procedures shall not be employed until the application has been approved by the appropriate ATF officer. The manufacturer or proprietor shall, during the period of authorization of an alternate method or procedure, comply with the terms of the approved application. Authorization for any alternate method or procedure may be withdrawn whenever in the judgment of the appropriate ATF officer the revenue is jeopardized or the effective administration of this part is hindered. The manufacturer or proprietor shall retain, as part of his records, any authorization of the appropriate ATF officer under this section.

The appropriate ATF officer may approve methods of operation other than as specified in this part, where he finds that an emergency exists and the proposed variations from the specified requirements are necessary, and the proposed variations—

(a) Will afford the security and protection to the revenue intended by the prescribed specifications,

(b) Will not hinder the effective administration of this part, and

(c) Will not be contrary to any provision of law. Variations from requirements granted under this section are conditioned on compliance with the procedures, conditions, and limitations set forth in the approval of the application. Failure to comply in good faith with such procedures, conditions, and limitations shall automatically terminate the authority for such variations and the manufacturer, export warehouse proprietor, or customs warehouse proprietor, thereupon shall fully comply with the prescribed requirements of regulations from which the variations were authorized. Authority for any variations may be withdrawn whenever in the judgment of the appropriate ATF officer the revenue is jeopardized or the effective administration of this part is hindered by the continuation of such variation. Where a manufacturer or proprietor desires to employ such variation, he shall submit a written application to the appropriate ATF officer. The application shall describe the proposed variations and set forth the reasons therefor. Variations shall not be employed until the application has been approved. The manufacturer or proprietor shall retain, as part of his records, any authorization of the appropriate ATF officer under this section.

Where there is a change in the name of an individual operating as an export warehouse proprietor he shall, within 30 days of such change, make application on Form 2098 (5200.16) for an amended permit.

Where there is a change in, or an addition or discontinuance of, a trade name used by an export warehouse proprietor in connection with operations authorized by his permit, the proprietor shall, within 30 days of such change, addition, or discontinuance, make application on Form 2098 (5200.16) for an amended permit to reflect such change. The proprietor shall also furnish a true copy of any new trade name certificate or document issued to him, or statement in lieu thereof, required by § 44.85.

Where there is a change in the name of a corporate export warehouse proprietor the proprietor shall, within 30 days of such change, make application on Form 2098 (5200.16) for an amended permit. The proprietor shall also furnish such documents as may be necessary to establish that the corporate name has been changed.

If an administrator, executor, receiver, trustee, assignee, or other fiduciary, is to take over the business of an export warehouse proprietor, as a continuing operation, such fiduciary shall, before commencing operations, make application for permit and file bond as required by subpart D of this part, furnish certified copies, in duplicate, of the order of the court, or other pertinent documents, showing his appointment and qualification as such fiduciary, and make an opening inventory, in accordance with the provisions of § 44.144; Provided, That where a diagram has been furnished by the predecessor, in accordance with the provisions of § 44.88, the successor may adopt such diagram. However, where a fiduciary intends merely to liquidate the business, qualification as an export warehouse proprietor will not be required if he promptly files with the appropriate ATF officer a statement to that effect, together with an extension of coverage of the predecessor's bond, executed by the fiduciary, also by the surety on such bond, in accordance with the provisions of § 44.126.

If a transfer is to be made in ownership of the business of an export warehouse proprietor (including a change in the identity of the members of a partnership or association), such proprietor shall give notice, in writing, to the appropriate ATF officer, naming the proposed successor and the desired effective date of such transfer. The proposed successor shall, before commencing operations, qualify as a proprietor, in accordance with the applicable provisions of subpart D of this part: Provided, That where a diagram has been furnished by the proprietor in accordance with the provisions of § 44.88, the proposed successor may adopt such diagram. The proprietor shall give such notice of transfer, and the proposed successor shall make application for permit and file bond, as required, in ample time for examination and approval thereof before the desired date of such change. The predecessor shall make a closing inventory and closing report, in accordance with the provisions of §§ 44.146 and 44.151, respectively, and surrender, with such inventory and report, his permit, and the successor shall make an opening inventory, in accordance with the provisions of § 44.144.

Where there is any change in the officers or directors of a corporation operating the business of an export warehouse proprietor, the proprietor shall furnish to the appropriate ATF officer notice, in writing, of the election of the new officers or directors within 30 days after such election.

Where the issuance, sale, or transfer of the stock of a corporation, operating as an export warehouse proprietor, results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate proprietor shall, within 30 days after the change occurs, make application for a new permit; otherwise, the present permit shall be automatically terminated at the expiration of such 30-day period, and the proprietor shall dispose of all cigars, cigarettes, and cigarette papers and tubes on hand, in accordance with this part, make a closing inventory and closing report, in accordance with the provisions of §§ 44.146 and 44.151, respectively, and surrender his permit with such inventory and report. If the application for a new permit is timely made, the present permit shall continue in effect pending final action with respect to such application.

Whenever an export warehouse proprietor contemplates changing the location of his warehouse, the proprietor shall, before commencing operations at the new location, make an application, on Form 2098 (5200.16) for an amended permit. The application shall be supported by an extension of coverage of the bond filed under this part, in accordance with the provisions of § 44.126.

Whenever any change occurs in the address, but not the location, of the warehouse of an export warehouse proprietor, as a result of action of local authorities, the proprietor shall, within 30 days of such change, make application on Form 2098 (5200.16) for an amended permit.

Where an export warehouse is to be changed to an extent which will make inaccurate the description of the warehouse as set forth in the last application by the proprietor for permit, or the diagram, if any, furnished with such application, the proprietor shall first make application on Form 2098 (5200.16) for, and obtain, an amended permit. Such application shall describe the proposed change in the warehouse and shall be accompanied by a new diagram if required under § 44.88.

In cases of emergency, the appropriate ATF officer may authorize, for a stated period, the temporary use of a place for the temporary storage of tobacco products, and cigarette papers and tubes, without making the application or furnishing the extension of coverage of bond required under §§ 44.111 and 44.126, or the temporary separation of warehouse premises by means other than those specified in § 44.89, where such action will not hinder the effective administration of this part, is not contrary to law, and will not jeopardize the revenue.

(a) Every export warehouse proprietor shall at the times specified in this subpart make a true and accurate inventory of products held on ATF Form 5220.3 (3373).

(b) This inventory shall be subject to verification by an appropriate ATF officer. A copy of each inventory shall be retained by the export warehouse proprietor for 3 years following the close of the calendar year in which the inventory is made and shall be made available for inspection by any appropriate ATF officer upon request.

An opening inventory shall be made by the export warehouse proprietor at the time of commencing business. The date of commencing business under this part shall be the effective date indicated on the permit issued under § 44.93. A similar inventory shall be made by the export warehouse proprietor when he files a superseding bond. The date of such inventory shall be the effective date of such superseding bond.

A special inventory shall be made by the export warehouse proprietor whenever required by any appropriate ATF officer.

A closing inventory shall be made by the export warehouse proprietor when he transfers ownership or concludes business. Where the proprietor transfers ownership the closing inventory shall be made as of the day preceding the date of the opening inventory of the successor.

Every export warehouse proprietor shall make a report on Form 5220.4 of all tobacco products, and cigarette papers and tubes on hand, received, removed, transferred, and lost or destroyed. Such report shall be made at the times specified in this subpart and shall be made whether or not any operations or transactions occurred during the period covered by the report. A copy of each report shall be retained by the export warehouse proprietor at his warehouse for 3 years following the close of the calendar year covered in such reports, and made available for inspection by any appropriate ATF officer upon his request.

An opening report, covering the period from the date of the opening inventory, or inventory made in connection with a superseding bond, to the end of the month, shall be made on or before the 20th day following the end of the month in which the business was commenced.

A report for each full month shall be made on or before the 20th day following the end of the month covered in the report.

A special report, covering the unreported period to the day preceding the date of any special inventory required by an appropriate ATF officer, shall be made with such inventory. Another report, covering the period from the date of such inventory to the end of the month, shall be made on or before the 20th day following the end of the month in which the inventory was made.

A closing report, covering the period from the first of the month to the date of the closing inventory, or the day preceding the date of an inventory made in connection with a superseding bond, shall be made with such inventory.

Remission of the tax liability on tobacco products, and cigarette papers and tubes may be extended to the export warehouse proprietor liable for the tax where such articles in bond are lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of such proprietor. Where articles are so lost or destroyed the proprietor shall report promptly such fact, and the circumstances, to the appropriate ATF officer. If the proprietor wishes to be relieved of the tax liability, the proprietor must prepare and file a claim on ATF Form 5620.8. The nature, date, place, and extent of the loss or destruction must be stated in such claim. The claim must be accompanied by such evidence as is necessary to establish to the satisfaction of the appropriate ATF officer that the claim is valid. When the appropriate ATF officer has acted on the claim, such officer will return a copy of ATF Form 5620.8 to the proprietor as notice of such action. The proprietor must keep the copy of ATF Form 5620.8 for 3 years following the close of the calendar year in which the claim is filed.

A claim for abatement of the unpaid portion of the assessment of any tax on tobacco products, and cigarette papers and tubes, or any liability in respect of such tax, alleged to be excessive in amount, assessed after the expiration of the period of limitation applicable thereto, or erroneously or illegally assessed, shall be filed on Form 5620.8. Such claim shall set forth the reasons relied upon for the allowance of the claim and shall be supported by such evidence as is necessary to establish to the satisfaction of the appropriate ATF officer that the claim is valid.

The taxes paid on tobacco products, and cigarette papers and tubes may be refunded (without interest) to an export warehouse proprietor on proof satisfactory to the appropriate ATF officer that the claimant proprietor paid the tax on such articles which were after taxpayment lost (otherwise than by theft) or destroyed, by fire, casualty, or act of God, while in the possession or ownership of such export warehouse proprietor, or withdrawn by him from the market. Any claim for refund under this section shall be prepared on Form 5620.8, in duplicate, and shall include a statement that the tax imposed by 26 U.S.C. 7652 or chapter 52, was paid in respect to the articles covered by the claim, and that the articles were lost, destroyed, or withdrawn from the market within 6 months preceding the date the claim is filed. The claim must be filed on ATF Form 5620.8 and supported by such evidence as is necessary to establish to the satisfaction of the appropriate ATF officer that the claim is valid. The duplicate of the claim shall be retained by the export warehouse proprietor for 3 years following the close of the calendar year in which the claim is filed. Where an export warehouse proprietor has paid the tax on tobacco products, or cigarette papers or tubes, he may file claim for refund of an overpayment of tax under subpart A of part 46 of this chapter if, at the time the tax was paid, these articles had been exported, destroyed, or otherwise disposed of in such a manner that tax was not due and payable.

All tobacco products, and cigarette papers and tubes will, before removal or transfer under this subpart, be put up by the manufacturer in packages which shall bear the label or notice, tax classification, and mark, as required by this subpart. For purposes of this subpart, the package does not include the cellophane wrapping material.

No certificate, coupon, or other device purporting to be or to represent a ticket, chance, share, or an interest in, or dependent on, the event of a lottery shall be contained in, attached to, or stamped, marked, written, or printed on any package of tobacco products, or cigarette papers or tubes.

No indecent or immoral picture, print, or representation shall be contained in, attached to, or stamped, marked, written, or printed on any package of tobacco products, or cigarette papers or tubes.

Every package of tobacco products shall, before removal from the factory under this subpart, have adequately imprinted thereon, or on a label securely affixed thereto, a mark as specified in this section. The mark may consist of the name of the manufacturer removing the product and the location (by city and State) of the factory from which the products are to be so removed, or may consist of the permit number of the factory from which the products are to be so removed. Any trade name of the manufacturer approved as provided in § 40.65 of this chapter may be used in the mark as the name of the manufacturer.) As an alternative, where tobacco products are both packaged and removed by the same manufacturer, either at the same or different factories, the mark may consist of the name of such manufacturer if the factory where package is identified on or in the package by a means approved by the appropriate ATF officer. Before using the alternative, the manufacturer shall notify the appropriate ATF officer in writing of the name to be used as the name of the manufacturer and the means to be used for identifying the factory where packaged. If approved by him the appropriate ATF officer shall return approved copies of the notice to the manufacturer. A copy of the approved notice shall be retained as part of the factory records at each of the factories operated by the manufacturer.

Every package of tobacco products shall, before removal from the factory under this subpart, have adequately imprinted thereon, or on a label securely affixed thereto, the words “Tax-exempt. For use outside U.S.” or the words “U.S. Tax-exempt. For use outside U.S.” except where a stamp, sticker, or notice, required by a foreign country or a possession of the United States, whichidentifies such country or possession, is so imprinted or affixed.

Before removal from a factory under this subpart, every package of cigars shall have adequately imprinted on it, or on a label securely affixed to it—

(a) The designation “cigars”;

(b) The quantity of cigars contained in the package; and

(c) For small cigars, the classification of the product for tax purposes; (i.e., either “small” or “little”).

Each shipping case, crate, or other container in which tobacco products, or cigarette papers or tubes are to be shipped or removed, under this part, shall bear a distinguishing number, such number to be assigned by the manufacturer or export warehouse proprietor. Removals of tobacco products, and cigarette papers and tubes from an export warehouse shall be made, insofar as practicable, in the same containers in which they were received from the factory.

Tobacco products, and cigarette papers and tubes transferred or removed from a factory or an export warehouse, under this part, without payment of tax, shall be consigned as required by this subpart.

Where tobacco products, and cigarette papers and tubes are transferred, without payment of tax, from a factory to an export warehouse or between export warehouses, such articles shall be consigned to the export warehouse proprietor to whom such articles are to be delivered.

Where tobacco products, and cigarette papers and tubes are returned by an export warehouse proprietor to a manufacturer or where cigars are so returned to a customs warehouse proprietor, such articles shall be consigned to the manufacturer or customs warehouse proprietor to whom the shipment is to be returned.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse for delivery to officers of the armed forces of the United States in this country for subsequent shipment to, and use by, the armed forces outside the United States, the manufacturer or export warehouse proprietor shall consign such articles to the receiving officer at the armed forces base or installation, in this country, to which they are to be delivered.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse, for direct delivery to a vessel or aircraft for transportation to a noncontiguous foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, the manufacturer or export warehouse proprietor shall consign the shipment directly to the vessel or aircraft, or to his agent at the port for delivery to the vessel or aircraft.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse and are destined for ultimate delivery in a noncontiguous foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, but the shipment is to be delivered in the United States to a Federal department or agency, or to an authorized dispatch agent, transportation officer, or port director of such a department or agency for forwarding on to the place of destination of the shipment, the manufacturer or export warehouse proprietor shall consign the shipment to the Federal department or agency, or to the proper dispatch agent, transportation officer, or port director of such department or agency.

Where tobacco products, or cigarette papers or tubes are removed from a factory or an export warehouse for export to a contiguous foreign country, the manufacturer or export warehouse proprietor shall consign the shipment to the district director of customs at the border or other port of exit.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse for delivery to a vessel or aircraft engaged in an activity for the Government of the United States or a foreign government, for consumption as supplies beyond the jurisdiction of the internal revenue laws of the United States, the manufacturer or export warehouse proprietor shall consign the shipment to the proper officer on board the vessel or aircraft to which the shipment is to be delivered.

Where tobacco products, or cigarette papers or tubes are removed from a factory or an export warehouse for consumption as supplies beyond the jurisdiction of the internal revenue laws of the United States, the manufacturer or export warehouse proprietor shall consign the shipment to the district director of customs at the port at which the shipment is to be laden.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse for delivery to a foreign-trade zone, under zone restricted status for the purpose of exportation or storage, the manufacturer or export warehouse proprietor shall consign the shipment to the Zone Operator in care of the customs officer in charge of the zone.

Tobacco products, and cigarette papers and tubes removed from a factory or an export warehouse, for export by parcel post to a person in a foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, shall be addressed and consigned to such person when the articles are deposited in the mails. Waiver of his right to withdraw such articles from the mails shall be stamped or written on each shipping container and be signed by the manufacturer or export warehouse proprietor making the shipment.

For each shipment of tobacco products, and cigarette papers and tubes transferred or removed from his factory, under bond and this part, the manufacturer shall prepare a notice of removal, Form 5200.14, and for each shipment of tobacco products, and cigarette papers and tubes transferred or removed from his export warehouse, under bond and this part, the export warehouse proprietor shall prepare a notice of removal, Form 5200.14. Each such notice shall be given a serial number by the manufacturer or export warehouse proprietor in a series beginning with number 1, with respect to the first shipment removed from the factory or export warehouse under this part and commencing again with number 1 on January 1 of each year thereafter.

After actual removal from his factory or export warehouse of the shipment described on the notice of removal, Form 5200.14, the manufacturer or export warehouse proprietor shall, except where the shipment is to be exported by parcel post, promptly forward one copy of the notice of removal to the appropriate ATF officer. A copy of each such notice shall be retained by the manufacturer or export warehouse proprietor as a part of his records, for 3 years following the close of the calendar year in which the shipment was removed and shall be made available for inspection by any appropriate ATF officer upon his request. The manufacturer or export warehouse proprietor shall dispose of the other copies of each notice of removal as required by this subpart.

Where tobacco products, and cigarette papers and tubes are transferred from a factory to an export warehouse or between export warehouses, the manufacturer or export warehouse proprietor making the shipment shall forward three copies of the notice of removal, Form 5200.14 to the export warehouse proprietor to whom the shipment is consigned. Immediately upon receipt of the shipment at his warehouse, the export warehouse proprietor shall properly execute the certificate of receipt on each copy of the notice of removal, noting thereon any discrepancy; return one copy to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer; retain one copy at his warehouse as a part of his records; and file the remaining copy with his report, required by § 44.147.

Where tobacco products, and cigarette papers and tubes are removed from an export warehouse for return to the factory, or cigars are removed from such a warehouse for return to a customs warehouse, the export warehouse proprietor making the shipment shall forward two copies of the notice of removal, Form 5200.14, to the manufacturer or customs warehouse proprietor to whom the shipment is consigned. Immediately upon receipt of the shipment at his factory or warehouse, the manufacturer or customs warehouse proprietor shall properly execute the certificate of receipt on both copies of the notice of removal, noting thereon any discrepancy, and return one copy to the export warehouse proprietor making the shipment for filing with the appropriate ATF officer. The other copy of the notice of removal shall be retained by the manufacturer or customs warehouse proprietor, as a part of his records, for 3 years following the close of the calendar year in which the shipment was received and shall be made available for inspection by any appropriate ATF officer upon his request.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse for delivery to officers of the armed forces of the United States in this country for subsequent shipment to, and use by, the armed forces outside the United States, the manufacturer or export warehouse proprietor making the removal shall forward a copy of the notice of removal, Form 5200.14, to the officer at the base or installation authorized to receive the articles described on the notice of removal. Upon execution by the armed forces receiving officer of the certificate of receipt on the copy of the notice of removal, he shall return such copy to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where tobacco products, or cigarette papers or tubes are removed from a factory or an export warehouse for direct delivery to a vessel or aircraft for transportation to a noncontiguous foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, the manufacturer or export warehouse proprietor making the shipment shall file two copies of the notice of removal, Form 5200.14, with the office of the district director of customs at the port where the shipment is to be laden. Such copies of the notice of removal should be filed with the related shipper's export declaration, Commerce Form 7525-V. In the event the copies of the notice of removal are not filed with the shipper's export declaration, when the copies of the notice are filed with the district director of customs they shall show all particulars necessary to enable that officer to associate the notice with the related shipper's export declaration and any other documents filed with his office in connection with the shipment. After the vessel or aircraft on which the shipment has been laden clears or departs from the port of lading the customs authority shall execute the certificate of exportation on both copies of the notice of removal, retain one copy for his records, and deliver or transmit the other copy to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse and are destined for ultimate delivery in a noncontiguous foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, but the shipment is to be delivered to a Federal department or agency, or to an authorized dispatch agent, transportation officer, or port director of such a department or agency for forwarding on to the place of destination of the shipment, the manufacturer or export warehouse proprietor making the shipment shall furnish a copy of the notice of removal, Form 5200.14, to the Federal department or agency, or an officer thereof at the port, receiving the shipment for ultimate transmittal to the place of destination, in order that such department, agency, or officer can properly execute the certificate of receipt on such notice to evidence receipt of the shipment for transmittal to a place beyond the jurisdiction of the internal revenue laws of the United States. After completing such certificate, the Federal department, agency, or officer shall return the copy of the notice of removal, so executed, to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer.

(a) Where tobacco products, or cigarette papers or tubes are removed from a factory or an export warehouse for export to a contiguous foreign country, the manufacturer or export warehouse proprietor making the shipment shall—

(1) Furnish to the district director of Customs at the port of exit two copies of the notice of removal, Form 5200.14, together with the related shipper's export declaration, Commerce Form 7525-V (if required); and,

(2) If copies of the notice of removal are not filed with the shippers export declaration, or if a shipment is for the armed forces of the United States in the contiguous foreign country and a shipper's export declaration is not required, show all the information on the notice of removal when it is filed so that the Customs officer is able to associate the notice with the related shipper's export declaration (if any) or other documents filed with Customs for the shipment.

(b) When a shipment has been cleared by Customs from the United States, and when the Customs officer at the port of exit is satisfied that the products have departed from the United States, he shall—

(1) Complete the certificate of exportation on both copies of the notice of removal;

(2) Retain one copy of the notice of removal for his records; and,

(3) Return the other copy to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer.

(c) The Customs officer may, when he considers it necessary to establish that the merchandise was actually exported, require a landing certificate before he completes the certificate of exportation specified in paragraph (b)(1) of this section. If practical, the Customs officer will give advance notice to the manufacturer or export warehouse proprietor of the type of transactions for which a landing certificate will be required. However, failure to notify the manufacturer or proprietor in advance will not prevent the Customs officer from requiring a landing certificate for specific exportations when he considers it necessary to protect the revenue. In any case, the Customs officer will advise the manufacturer or proprietor before departure of the shipment from the United States as to those exports for which a landing certificate will be required.

(d) The provisions of this section relating to landing certificates also apply when a Form 5200.14 is not required for each transaction (for example: When multiple exportations, individually documented by commercial records, are consolidated on a single Form 5200.14 pursuant to an approved alternate procedure under § 44.72). The provisions apply to each transaction, regardless of the manner in which it is documented, unless specifically provided otherwise in the alternate procedure.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse for direct delivery to a vessel or aircraft, engaged in an activity for the Government of the United States or a foreign government, for consumption as supplies beyond the jurisdiction of the internal revenue laws of the United States, the manufacturer or export warehouse proprietor making the shipment shall forward a copy of the notice of removal, Form 5200.14, to the officer of the vessel or aircraft authorized to receive the shipment. Upon execution by the receiving officer of the vessel or aircraft of the certificate of receipt on the copy of the notice of removal, he shall return such copy to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse for delivery to a foreign-trade zone, under zone restricted status for the purpose of exportation or storage, the manufacturer or export warehouse proprietor making the shipment shall forward two copies of the notice of removal, Form 5200.14, to the customs officer in charge of the zone. Upon receipt of the shipment, the customs officer shall execute the certificate of receipt on each copy of the form, noting thereon any discrepancy, retain one copy for his records, and forward the other copy to the manufacturer or export warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where tobacco products, and cigarette papers and tubes are removed from a factory or an export warehouse, for export by parcel post, the manufacturer or export warehouse proprietor shall present one copy of the notice of removal, Form 5200.14, together with the shipping containers, to the postal authorities with the request that the postmaster or his agent execute the certificate of mailing on the form. Where the manufacturer or export warehouse proprietor so desires, he may cover under one notice of removal all the merchandise removed under this part for export by parcel post which is delivered at one time to the postal service for that purpose. The manufacturer or export warehouse proprietor shall immediately file the receipted copy of the notice of removal with the appropriate ATF officer.

Where the customs warehouse proprietor desires to withdraw cigars from his warehouse, without payment of tax, under this subpart, he shall, prior to making the first withdrawal, file a bond, Form 2104 (5200.15), conditioned upon compliance with the provisions of 26 U.S.C. chapter 52, and regulations thereunder, including, but not limited to, the timely payment of taxes imposed by such chapter, for which he may be responsible to the United States, and penalties and interest in connection therewith. The provisions of §§ 44.121 and 44.122 are applicable to the bond required under this section.

The amount of the bond filed by the customs warehouse proprietor, as required by § 44.243, shall be not less than the estimated amount of tax which may at any time constitute a charge against the bond: Provided, That the amount of any such bond (or the total amount where original and strengthening bonds are filed) shall not exceed $25,000 nor be less than $1,000. The charges against such bond shall be subject to increase as withdrawals are made and decrease as required evidence of exportation is received by the appropriate ATF officer with respect to cigars withdrawn. When the limit of liability under a bond given in less than the maximum amount has been reached, further withdrawals shall not be made thereunder until a strengthening or superseding bond is filed as required by § 44.245 or § 44.246.

Where the appropriate ATF officer determines that the amount of the bond, under which the customs warehouse proprietor is withdrawing cigars for shipment under this subpart, no longer adequately protects the revenue, and such bond is in an amount of less than $25,000, the appropriate ATF officer may require the proprietor to file a strengthening bond in an appropriate amount with the same surety as that on the bond already in effect, in lieu of a superseding bond to cover the full liability on the basis of § 44.244. The appropriate ATF officer shall refuse to approve any strengthening bond where any notation is made thereon which is intended or which may be construed as a release of any former bond, or as limiting the amount of either bond to less than its full amount.

The customs warehouse proprietor shall file a new bond to supersede his current bond, immediately when (a) the corporate surety on the current bond becomes insolvent, (b) the appropriate ATF officer approves a request from the surety on the current bond to terminate his liability under the bond, (c) payment of any liability under a bond is made by the surety thereon, or (d) the appropriate ATF officer considers such a superseding bond necessary for the protection of the revenue.

The liability of a surety on any bond required by this subpart shall be terminated only as to operations on and after the effective date of a superseding bond, or the date of approval of the customs warehouse proprietor's request for termination, or otherwise, in accordance with the termination provisions of the bond. The surety shall remain bound in respect of any liability for unpaid taxes, penalties, and interest, not in excess of the amount of the bond, incurred by the proprietor while the bond is in force.

Cigars shall, before withdrawal under this part, be put up by the customs warehouse proprietor in packages which shall bear the label or notice, tax classification, and mark, as required by this subpart.

No certificate, coupon, or other device purporting to be or to represent a ticket, chance, share, or an interest in, or dependent on, the event of a lottery shall be contained in, attached to, or stamped, marked, written, or printed on any package of cigars withdrawn under this subpart.

No indecent or immoral picture, print, or representation shall be contained in, attached to, or stamped, marked, written, or printed on any package of cigars withdrawn under this subpart.

Every package of cigars shall, before withdrawal from the customs warehouse under this subpart, have adequately imprinted thereon, or on a label securely affixed thereto, the name and location of the manufacturer. There shall also be adequately stated on each such package the number of cigars contained in the package.

Every package of cigars shall, before withdrawal from the customs warehouse under this subpart, have adequately imprinted thereon, or on a label securely affixed the words “Tax-exempt. For use outside U.S.” or the words “U.S. Tax-exempt. For use outside U.S.”, except where a stamp, sticker, or notice, required by a foreign country or a possession of the United States, which identifies such country or possession, is so imprinted or affixed.

Before withdrawal of cigars from a customs warehouse under this subpart, every package of cigars shall have adequately imprinted on it, or on a label securely affixed to it—

(a) The designation “cigars”;

(b) The quantity of cigars contained in the package; and

(c) For small cigars, the classification of the product for tax purposes (i.e., either “small” or “little”).

Each shipping case, crate, or other container, in which cigars are to be withdrawn, under this subpart, shall bear a distinguishing number, such number to be assigned by the customs warehouse proprietor.

Cigars withdrawn from a customs warehouse, without payment of tax, under internal revenue bond and this part, shall be consigned in the same manner as provided by subpart J of this part with respect to the removal of tobacco products, and cigarette papers and tubes from a factory or an export warehouse.

For each shipment to be withdrawn under this subpart, the customs warehouse proprietor shall prepare a notice of removal, Form 5200.14. Each such notice shall be given a serial number by the proprietor in a series beginning with number 1, with respect to the first shipment withdrawn under this subpart and commencing again with number 1 on January 1 of each year thereafter.

After actual withdrawal from his warehouse of the shipment described on the notice of removal, Form 5200.14, the customs warehouse proprietor shall, except where the shipment is to be exported by parcel post, promptly forward one copy of the notice of removal to the appropriate ATF officer. A copy of each such notice shall be retained by the customs warehouse proprietor as a part of his records, for 3 years following the close of the calendar year in which the shipment was withdrawn, and shall be made available for inspection by any appropriate ATF officer upon his request. The proprietor shall dispose of the other copies of each notice of removal as required by this subpart.

Where cigars are withdrawn from a customs warehouse for delivery to officers of the armed forces of the United States in this country for subsequent shipment to, and use by, the armed forces outside the United States, the customs warehouse proprietor making the shipment shall forward a copy of the notice of removal, Form 5200.14, to the officer at the base or installation authorized to receive the cigars described on the notice of removal. Upon execution by the armed forces receiving officer of the certificate of receipt on the copy of the notice of removal, he shall return such copy to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse for direct delivery to a vessel or aircraft for transportation to a noncontiguous foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, the customs warehouse proprietor making the withdrawal shall file two copies of the notice of removal, Form 5200.14, with the office of the district director of customs at the port where the shipment is to be laden. Such copies of the notice of removal should be filed with the related shipper's export declaration, Commerce Form 7525-V. In the event the copies of the notice of removal are not filed with the shipper's export declaration, when the copies of the notice are filed with the district director of customs they shall show all particulars necessary to enable that officer to associate the notice with the related shipper's export declaration and any other documents filed with his office in connection with the shipment. After the vessel or aircraft on which the shipment has been laden clears or departs from the port of lading the customs authority shall execute the certificate of exportation on both copies of the notice of removal, retain one copy for his records, and deliver or transmit the other copy to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse and are destined for ultimate delivery in a noncontiguous foreign country, Puerto Rico, the Virgin Islands, or a possession of the United States, but the shipment is to be delivered to a Federal department or agency, or to an authorized dispatch agent, transportation officer, or port director of such a department or agency for forwarding on to the place of destination of the shipment, the customs warehouse proprietor making the shipment shall furnish a copy of the notice of removal, Form 5200.14, to the Federal department or agency, or an officer thereof at the port, receiving the shipment for ultimate transmittal to the place of destination, in order that such department, agency, or officer, can properly execute the certificate of receipt on such notice to evidence receipt of the shipment for transmittal to a place beyond the jurisdiction of the internal revenue laws of the United States. After completing such certificate, the Federal department, agency, or officer, shall return the copy of the notice of removal, so executed, to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse for export to a contiguous foreign country, the customs warehouse proprietor making the shipment shall furnish to the district director of customs at the border or other port of exit two copies of the notice of removal, Form 5200.14, together with the related shipper's export declaration, Commerce Form 7525-V. In the event the copies of the notice of removal are not filed with the shipper's export declaration or, in the case of a shipment for the armed forces of the United States in the contiguous foreign country where no shipper's export declaration is required, the copies of the notice when filed with the district director of customs shall show all particulars necessary to enable that officer to associate the notice with the related shipper's export declaration, if any, and any other documents filed with his office in connection with the shipment. After the shipment has been cleared by customs from the United States, the customs authority at the port of exit shall complete the certificate of exportation on both copies of the notice of removal, retain one copy for his records, and transmit the other copy to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse for direct delivery to a vessel or aircraft, engaged in an activity for the Government of the United States or a foreign government, for consumption as supplies beyond the jurisdiction of the internal revenue laws of the United States, the customs warehouse proprietor making the shipment shall forward a copy of the notice of removal, Form 5200.14, to the officer of the vessel or aircraft authorized to receive the shipment. Upon execution by the receiving officer of the vessel or aircraft of the certificate of receipt on the copy of the notice of removal, he shall return such copy to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse for delivery to a vessel or aircraft entitled to receive such articles for consumption as supplies beyond the jurisdiction of the internal revenue laws of the United States, the customs warehouse proprietor making shipment shall file two copies of the notice of removal, Form 5200.14, with the district director of customs at the port where the shipment is to be laden in sufficient time to permit delivery of the two copies of the notice of removal to the customs officer who will inspect the shipment and supervise its lading. After inspection and lading of the shipment the customs officer shall note on the copies of the notice of removal any discrepancy between the shipment inspected and laden under his supervision and that described on the notice of removal or any limitation on the quantity to be laden; complete and sign the certificate of inspection and lading; and return both copies of the notice of removal to the district director of customs. The district director of customs shall execute the certificate of clearance on both copies of the notice of removal, retain one copy for his records, and forward the other copy to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer. Where the vessel or aircraft does not clear from the port at which the shipment is laden, the customs officer supervising the lading of the shipment shall require the person on board the vessel or aircraft authorized to receive the shipment to execute the certificate of receipt on both copies of the notice of removal to indicate the trade or activity in which the vessel or aircraft is engaged.

Where cigars are withdrawn from a customs warehouse for delivery to an export warehouse, the proprietor of the customs warehouse shall forward to the proprietor of the export warehouse three copies of the notice of removal, Form 5200.14, covering the shipment, for execution and disposition in accordance with procedure similar to that set forth in § 44.200 in connection with a shipment of tobacco products, and cigarette papers and tubes from a factory to an export warehouse. The executed copy of the notice of removal, Form 5200.14, returned to the customs warehouse proprietor by the export warehouse proprietor shall be filed with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse for delivery to a foreign-trade zone, under zone restricted status for the purpose of exportation or storage, the customs warehouse proprietor making the shipment shall forward two copies of the notice of removal, Form 5200.14, to the customs officer in charge of the zone. Upon receipt of the shipment, the customs officer shall execute the certificate of receipt on each copy of the form, noting thereon any discrepancy, retain one copy for his records, and forward the other copy to the customs warehouse proprietor making the shipment for filing with the appropriate ATF officer.

Where cigars are withdrawn from a customs warehouse for export by parcel post, the customs warehouse proprietor shall present one copy of the notice of removal, Form 5200.14, together with the shipping containers, to the postal authorities with the request that the postmaster or his agent execute the certificate of mailing on the form. Where a customs warehouse proprietor so desires, he may cover under one notice of removal all the cigars removed under this part for export by parcel post which are delivered at one time to the postal service for that purpose. The customs warehouse proprietor shall immediately file the receipted copy of the notice of removal with the appropriate ATF officer.

Where cigars are returned to a customs warehouse from an export warehouse, the officer in charge of the customs warehouse shall execute the certificate of receipt on each of the copies of the related Form 5200.14 received from the export warehouse proprietor, after checking the containers to determine whether all the cigars described on the notice have been received. Thereafter, both copies of the Form 5200.14 shall be turned over to the proprietor of the customs warehouse who shall return one copy to the export warehouse proprietor for disposition as provided in § 44.201. The customs warehouse proprietor shall retain the other copy of the notice of removal, as a part of his records, for 3 years following the close of the calendar year in which the shipment was received. Such copy shall be made available for inspection by any appropriate ATF officer upon his request.

A customs warehouse proprietor may return to his warehouse cigars previously withdrawn therefrom, under this subpart, provided he promptly files with the appropriate ATF officer a copy of the Form 5200.14 under which the cigars were originally withdrawn, with the certificate of receipt properly modified and executed by the customs officer in charge of the warehouse to show return of the shipment. If less than the entire shipment is returned to the warehouse, the form shall state what disposition was made of the remainder of the original shipment and any other facts pertinent to such shipment. The customs warehouse proprietor shall retain a copy of such form as a part of his records for 3 years after the close of the calendar year in which the shipment was returned. Such copy shall be made available for inspection by any appropriate ATF officer upon request.

When used in this subpart, the following terms shall have the meanings given in this section, unless the context clearly indicates otherwise. Words in the plural form shall include the singular, and vice versa, and words indicating the masculine gender shall include the feminine. The terms “includes” and “including” do not exclude things not listed which are in the same general class.

Act. The Excise Tax Technical Changes Act of 1958 (Pub. L. 85-859, 72 Stat. 1275), enacted September 2, 1958.

Appropriate ATF officer. An officer or employee of the Bureau of Alcohol, Tobacco and Firearms (ATF) authorized to perform any functions relating to the administration or enforcement of this part by ATF Order 1130.28, Delegation of the Director's Authorities in 27 CFR parts 45 and 46.

Claimant. The person who held the tobacco products or cigarette papers and tubes for sale at the time of the disaster and who files claim under this subpart.

Commissioner of Customs. The Commissioner of Customs, U.S. Customs Service, The Department of the Treasury, Washington, DC.

Disaster. A flood, fire, hurricane, earthquake, storm, or other catastrophe which has occurred in any part of the United States on and after the day following the date of enactment of the act and which the President of the United States has determined, under the Act of September 30, 1950 (64 Stat. 1109; 42 U.S.C. 1855), was a “major disaster” as defined in such Act.

Duly authorized official. Any Federal, State, or local government official in whom has been vested authority to condemn tobacco products and cigarette papers and tubes made the subject of a claim under this subpart.

Duty or duties. Any duty or duties paid under the customs laws of the United States.

Removal or remove. The removal of tobacco products or cigarette papers or tubes from the factory, or release of such articles from Customs custody.

Sale price. The price for which large cigars are sold by the manufacturer or importer, determined in accordance with §§ 40.22 or 275.39 and used in computation of the tax.

Tax paid or determined. The internal revenue tax on tobacco products and cigarette papers and tubes which has acutally been paid, or which has been determined pursuant to 26 U.S.C. 5703(b), and regulations thereunder, at the time of their removal subject to tax payable on the basis of a return.

Tobacco Products. Cigars, cigarettes, smokeless tobacco, pipe tobacco, and roll-your-own tobacco.

United States. When used in a geographical sense, includes only the States, and the District of Columbia.

An appropriate ATF officer shall allow payment (without interest) of an amount equal to the amount of tax paid or determined, and the Commissioner of Customs shall allow payment (without interest) of an amount equal to the amount of customs duty paid, on tobacco products, and cigarette papers and tubes removed, which are lost, rendered unmarketable, or condemned by a duly authorized official by reason of a disaster occurring in the United States on and after September 3, 1958. Such payments may be made only if, at the time of the disaster, such tobacco products, or cigarette papers or tubes were being held for sale by the claimant. No payment shall be made under this subpart with respect to any amount of tax or duty claimed or to be claimed under any other provision of law or regulations.

Disaster loss claims for tobacco products or cigarette papers or tubes must be executed on ATF Form 2635 (5620.8), Claim—Alcohol, Tobacco and Firearms Taxes, in accordance with the instructions on the form. If a claim involves taxes on both domestic and imported products, the quantities of each must be shown separately in the claim. Prepare a separate claim in respect of customs duties.

The claim should contain the following information:

(a) That the tax on such tobacco products, or cigarette papers or tubes has been paid or determined and customs duty has been paid;

(b) That such tobacco products, or cigarette papers or tubes were lost, rendered unmarketable, or condemned by a duly authorized official, by reason of a disaster;

(c) The type and date of occurrence of the disaster and the location of the tobacco products, or cigarette papers or tubes at that time;

(d) That the claimant was not indemnified by any valid claim of insurance or otherwise in respect of the tax, or tax and duty, on the tobacco products, or cigarette papers or tubes covered by the claim;

(e) That no amount of internal revenue tax or customs duty claimed has been or will be otherwise claimed under any other provision of law or regulations,

(f) That the claimant is entitled to payment under this subpart, and

(g) The claim must set forth the quantity and kind of tobacco products and cigarette papers and tubes in sufficient detail to calculate the amount of tax and duty paid on these products, substantially as shown in the examples below:

The claimant must support the claim with any available evidence (such as inventories, statements, invoices, bills, records, stamps, and labels), relating to the tobacco products or cigarette papers or tubes on hand at the time of the disaster and claimed to have been lost, rendered unmarketable, or condemned as a result thereof. If the claim is for refund of duty, the claimant must furnish, if practicable, the customs entry number, date of entry, and the name of the port of entry.

Disaster loss claims must be filed within 6 months after the date on which the President makes the determination that the disaster has occurred. All forms, including claims for duty on imported products, must be filed with the appropriate ATF officer.

The appropriate ATF officer must act upon each claim for payment (without interest) of an amount equal to the tax paid or determined filed under this subpart and must notify the claimant. Claims and supporting data involving customs duties will be forwarded to the Commissioner of Customs with a summary statement of such officer's findings.

Before payment is made under this subpart in respect of the tax, or tax and duty, on tobacco products, or cigarette papers or tubes rendered unmarketable or condemned by a duly authorized official, such tobacco products, or cigarette papers or tubes must be destroyed by suitable means under the supervision of an appropriate ATF officer who will be assigned for that purpose by another appropriate ATF officer. However, if the destruction of such tobacco products, or cigarette papers or tubes has already occurred, and if the appropriate ATF officer who acts on the claim is satisfied with the supervision of such destruction, ATF supervision will not be required.

Penalties are provided in 26 U.S.C. 7206 and 7207 for the execution under the penalties of perjury of any false or fraudulent statement in support of any claim and for the filing of any false or fraudulent document under this subpart. All provisions of law, including penalties, applicable in respect of internal revenue taxes on tobacco products, and cigarette papers and tubes shall, insofar as applicable and not inconsistent with this subpart, be applied in respect of the payments provided for in this subpart to the same extent as if such payments constituted refunds of such taxes.

The regulations in this subpart implement the floor stocks tax on cigarettes held for sale the first moment on January 1, 2000 and on January 1, 2002.

(a) Appropriate ATF officer. An officer or employee of the Bureau of Alcohol, Tobacco and Firearms (ATF) authorized to perform any functions relating to the administration or enforcement of this subpart by ATF Order 1130.28, Delegation of the Director's Authorities in parts 45 and 46.

(b) Controlled group. Pursuant to 26 U.S.C. 5061(e)(3), the term “controlled group” means a controlled group of corporations, as defined in 26 U.S.C. 1563, and implementing regulations in 26 CFR 1.1563-1 through 1.1563-4, except that the words “at least 80 percent” shall be replaced by the words “more than 50 percent” in each place they appear in subsection (a) of 26 U.S.C. 1563, as well as in the implementing regulations. Controlled groups of corporations include, but are not limited to:

(1) Parent-subsidiary controlled groups as defined in 26 CFR 1.1563-1 (a)(2).

(2) Brother-sister controlled groups as defined in 26 CFR 1.1563-1(a)(3).

(3) Combined groups as defined in 26 CFR 1.1563-1(a)(4). Also, the rules for a controlled group of corporations apply in a similar fashion to groups which include partnerships and/or sole proprietorships. If one entity maintains more than 50% control over a group consisting of corporations and one, or more, partnerships and/or sole proprietorships, all are members of a controlled group.

(c) Foreign trade zone. A foreign trade zone established and operated pursuant to the Act of June 18, 1934, as amended, 19 U.S.C. 81a.

(d) Large cigarettes. Cigarettes weighing more than three pounds per thousand.

(e) Person. When the term “person” is used in this subpart, it refers to an individual, partnership, association, company, corporation, a trust, or an estate. It also includes any State or political subdivision.

(f) Small cigarettes. Cigarettes weighing not more than three pounds per thousand.

(g) Tax increase dates. For the purposes of this floor stocks tax, the tax increase dates are January 1, 2000 and January 1, 2002.

Floor stocks tax is a tax imposed on all Federally taxpaid or tax determined cigarettes held for sale on the first moment a tax increase becomes effective. The tax is the difference between the previous excise tax rate and the new tax rate.

You are liable for this tax if you hold for sale any taxpaid or taxdetermined cigarettes at the moment a tax increase is effective. You are liable for floor stocks tax on cigarettes that you own that may be in transit (refer to §§ 46.207 and 46.208). You may also be liable if you hold cigarettes in a foreign trade zone (refer to § 46.209).

If you do not hold any taxpaid or taxdetermined cigarettes for sale at the moment a tax increase is effective, you are not liable for this tax.

(a) Take an inventory. Establish the quantity of cigarettes subject to the floor stocks tax held for sale at the beginning of the tax increase dates (January 1, 2000 and January 1, 2002). You may take a physical inventory or you may use a book or record inventory, as specified in §§ 46.205 and 46.206.

(b) Compute tax amount. Compute the amount of tax for the cigarettes held for sale at the start of each of the tax increase dates. Refer to the table shown in § 46.222. Apply the tax credit as provided by § 46.223.

(c) File tax return. After you have computed the floor stocks tax, you must file a return for each tax increase date if tax is due.

(d) Maintain records. Maintain all records used to determine the quantity of cigarettes on hand at the start of each tax increase date. You must also maintain all computations used to determine the amount of tax owed. Refer to § 46.241.

You must take an inventory to establish the quantity of cigarettes subject to the floor stocks tax. You may take a physical inventory or a book or record inventory.

Your inventory of cigarettes must count separately cigarettes that have been labeled for export from the United States.

Each package (the container in which cigarettes are put up by the manufacturer and delivered to the consumer) of cigarettes will have:

(a) A mark or a label with the words “Tax-exempt. For use outside U.S.” or “U.S. Tax Exempt. For use outside U.S.”; or

(b) A stamp, sticker, or notice, required by a foreign country or possession of the United States, which identifies such country or possession.

You must take your physical inventory or book or record inventory during the periods noted in the table to this section.

Your physical inventory must include a written record of:

(a) Quantity and Type. You must record the quantity and type of cigarettes in sufficient detail to determine the tax rate as stated in § 46.222 and whether the cigarettes have export markings as stated in § 46.203. The following chart provides the type of cigarette and method to use to determine quantities:

You may use a book or record inventory if you have source records that show:

(a) The quantity of receipts and dispositions of all cigarettes.

(b) The actual type and quantities of cigarettes on hand as if a physical inventory had taken place the moment the tax increase became effective. Refer to § 46.205(a).

(c) The name and address of the consignor and consignee.

(d) The date of receipt or disposition of the cigarettes.

(e) The brand name of each product.

(f) If you do not take the inventory as of the close of business on the last respective business days of 1999 and 2001, the records must be reconciled as described in § 46.205(e).

Cigarettes in transit must be included in your inventory if you hold title to the cigarettes. If you have transferred the title, you must document the title transfer in writing. For example, you may mark the bill of lading with a written statement that indicates the time and place of the title transfer.

You may use the following guidelines to establish who holds title to cigarettes in transit.

(a) If State law mandates the change in title, then no agreement or contract between seller and buyer can alter it.

(b) In the absence of State law governing the change of title between seller and buyer, the Uniform Commercial Code allows the seller and buyer to agree when title passes.

(c) If there is no State law or agreement between the seller and buyer, the Uniform Commercial Code states that title transfer depends on how the seller ships the cigarettes.

(1) Freight on board (F.O.B.) destination. The title transfer occurs when the seller completes the performance of the physical delivery of the cigarettes.

(2) Freight on board (F.O.B.) shipping point. The title transfer occurs when the seller transfers the title at the time and place of shipment, which is generally by common carrier.

You are liable for the tax and must take an inventory when either of the following conditions apply:

(a) Internal revenue taxes have been determined or Customs duties liquidated, with respect to cigarettes pursuant to the first proviso of section 3(a) of the Act of June 18, 1934 (48 Stat. 998, 19 U.S.C. 81a), or

(b) Cigarettes are held by a Customs officer pursuant to the second proviso of section 3(a) of the Act of June 18, 1934 (48 Stat. 998, 19 U.S.C. 81a).

If you are a manufacturer or an export warehouse proprietor and hold cigarettes in ATF bond on the tax increase dates, the floor stocks tax does not apply to those cigarettes. Likewise, if you have cigarettes held in a Customs bonded warehouse, the floor stocks tax does not apply on those cigarettes.

Any cigarettes that you hold for return to a supplier because of some defect are not subject to the floor stocks tax. You must prepare a separate list of these items. You cannot include as unmerchantable any items that may be held because of poor market demand or to reduce your inventory.

You do not have to inventory cigarettes held in a vending machine for retail sale, provided:

(a) The vending machine holding the cigarettes is placed at a location where retail sales occur, and

(b) The cigarettes are ready to be dispensed by a consumer.

Cigarettes marked “not for sale” or “complimentary” that are part of a sale (for example, buy two packs and get one pack free) are subject to the floor stocks tax and must be included in the book or record inventory as required by §§ 46.205 and 46.206. Cigarettes that are marked “not for sale” or “complimentary” and are intended to be given away and not in conjunction with any sale are not subject to the floor stocks tax.

After you have taken your inventory, apply the applicable tax rate for each type of cigarette using the table in § 46.222. Multiply the amount of each type of cigarette by the applicable tax rate.

You are allowed a credit against your floor stocks tax of up to $500. However, controlled groups are eligible for only one credit for the entire group. The credit may be divided equally among the members or apportioned in any other manner agreeable to the members.

You may obtain ATF Form 5000.28T, Floor Stocks Tax Return for Cigarettes, from any of the following sources:

(a) ATF web site (www.atf.treas.gov);

(b) ATF Distribution Center, PO Box 5950, Springfield, Virginia 22150-5950, telephone (703) 455-7801; or

(c) National Revenue Center, 550 Main Street, Cincinnati, Ohio 45202-3263, telephone (800) 398-2282 or (513) 684-7151.

If your tax liability is zero, you do not have to complete or file a tax return. Otherwise, complete and file the floor stocks tax return in accordance with the instructions for the form.

Your payment must be in the form of a check or money order and sent with ATF Form 5000.28T unless you are required to file by electronic fund transfer as described in paragraph (a) of this section.

(a) Electronic fund transfer. If you pay any other excise taxes collected by ATF by electronic fund transfer, then you must also send your payment for this floor stocks tax by an electronic fund transfer. ATF P 5000.10, Payment by Electronic Funds Transfer, specifies how to make an electronic fund transfer. You can get ATF P 5000.10 from any of the following sources:

(1) ATF web site (www.atf.treas.gov);

(2) ATF Distribution Center, P.O. Box 5950, Springfield, Virginia 22150-5950, telephone (703) 455-7801; or

(3) National Revenue Center, 550 Main Street, Cincinnati, Ohio 45202-3263, telephone (800) 398-2282 or (513) 684-7151.

(b) [Reserved]

You may file a consolidated return if all locations or places of business have the same employer identification number. You also have the option of filing a separate return for each place of business or location.

(a) Cigarettes warehoused at one or more locations must be reported on the tax return representing the location where the cigarettes will be offered for sale.

(b) Cigarettes offered for sale at several locations must be reported on a tax return filed by one or more of the locations. The cigarettes can be reported by a single location or apportioned among several locations.

If you are a member of a controlled group, you must file if the combined liability with other members is more than $500. If you have your own employer identification number, you must file a separate tax return. You may take the tax credit discussed in § 46.223 if it is apportioned to you as a member of the controlled group.

You must maintain:

(a) Inventory records.

(b) Tax computations.

(c) Names, addresses and employer identification number of all controlled group members, if applicable.

(d) Copy of tax return, if you filed one.

(e) List of locations and warehouses covered by the tax return.

(f) Any approved alternate method or procedure under 46.263.

An appropriate ATF officer may require, in writing, that you keep records and any tax returns for an additional period of not more than 3 years. Keep your records in accordance with time frames shown in the table to this section.

You must maintain a list of each place where you hold cigarettes subject to the floor stocks tax. This list must include:

(a) Address.

(b) Name of the proprietor (if different).

(c) The employer identification number (if different).

(d) Quantity and classification of all cigarettes held at each location.

Keep your inventory records at your principal place of business. All records must be made available to an appropriate ATF officer upon demand.

Before you can file a claim for refund, you must have paid your floor stocks tax on ATF F 5200.28T and subsequently determined that you overpaid the tax.

You must file the claim within 3 years from the due date of filing the tax return or 2 years from the time the tax was paid, whichever is later.

Your claim must be filed on ATF Form 2635 (5620.8). The claim must include detailed and sufficient evidence to support why you believe the tax was overpaid. The claim and supporting documentation must be mailed or delivered to the address shown on the form.

After you have paid the floor stocks tax, you may file a claim for refund of tax on cigarettes lost, rendered unmarketable, or condemned because of a Presidentially-declared major disaster. Refer to subpart C of this part for the time, evidence and procedures for filing a claim.

(a) Manufacturer. 27 CFR part 40, subparts I and K state the times, reasons and procedures for filing a claim for refund.

(b) Export warehouse proprietor. 27 CFR part 44, subpart G, states the time, evidence and procedures for filing a claim for refund.

(c) Exported taxpaid. If cigarettes are shipped from the United States, you may file a claim for drawback of taxes under subpart K of 27 CFR part 44.

(d) Importer. An importer may follow the procedures for filing a claim as described in 27 CFR part 275, subpart I.

An alternate method or procedure is a different way of performing a requirement than is provided in this subpart of regulations. You would only make a request if you wanted to perform a requirement in a different way than is provided in this subpart.

You must apply in writing to the National Revenue Center, 550 Main Street, Cincinnati, Ohio 45202-3263. You must describe the alternate method or procedure and reasons you wish to use it. You cannot use the alternate method until you receive written approval from ATF.

The alternate method or procedure may be approved if it meets all of the following conditions:

(a) There is good cause for its use.

(b) It is consistent with the purpose and effect intended by the prescribed method or procedure.

(c) It affords equivalent security to the revenue.

(d) It is not contrary to any provision of law.

(e) It will not result in an increase in cost to the Government.

(f) It will not hinder the effective administration of this subpart such as delaying timely payment of taxes.

(g) It is not a method or procedure that relates to the payment or collection of tax.

The approval will be withdrawn if revenue is jeopardized or administration of this subpart is hindered. ATF will give you a written notice of the withdrawal.

Appropriate ATF officers, in performing official duties, may enter any premises to examine cigarettes subject to floor stocks tax. They may enter the premises during the day or may also enter at night if the premises are open. Appropriate ATF officers may audit and examine all cigarettes, inventory records, books, papers, or other resource data for the purpose of ascertaining, determining or collecting floor stocks tax. They may take testimony (under oath) of any person when inquiring as to proper payment of floor stocks taxes.

Appropriate ATF officers can issue summonses when there is no Justice Department referral under the authority stated in 27 CFR 70.22. The summons will state a place and time for such items or person to appear. ATF will issue a summons to require:

(a) Any books of account or other data pertaining to liability of floor stocks tax.

(b) Any person liable for the floor stocks tax or having possession of books of account or other data.

(c) Any other appropriate person in connection with the books or tax liability.

If you or another person in charge of the premises refuses to admit any appropriate ATF officer or prevents any appropriate ATF officer from examining the records or cigarettes, you may be liable for the penalties described in 26 U.S.C. 7342 and 7212, respectively.

If you fail to follow these regulations, ATF may apply applicable civil and criminal penalties under the Internal Revenue Code of 1986. For example, failure to file and failure to pay penalties may be assessed against you if you do not timely file your tax return or timely pay the taxes due. In addition, interest under 26 U.S.C. 6621 accrues for any underpayment of tax and on all assessed penalties until paid.