§ 261.24
Toxicity characteristic.
(a) A solid waste (except manufactured gas plant waste) exhibits the characteristic of toxicity if, using the Toxicity Characteristic Leaching Procedure, test Method 1311 in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, as incorporated by reference in § 260.11 of this chapter, the extract from a representative sample of the waste contains any of the contaminants listed in table 1 at the concentration equal to or greater than the respective value given in that table. Where the waste contains less than 0.5 percent filterable solids, the waste itself, after filtering using the methodology outlined in Method 1311, is considered to be the extract for the purpose of this section.
(b) A solid waste that exhibits the characteristic of toxicity has the EPA Hazardous Waste Number specified in Table I which corresponds to the toxic contaminant causing it to be hazardous.
Table 1—Maximum Concentration of Contaminants for the Toxicity Characteristic
EPA HW No. 1
Contaminant
CAS No. 2
Regulatory Level (mg/L)
D004
Arsenic
7440-38-2
5.0
D005
Barium
7440-39-3
100.0
D018
Benzene
71-43-2
0.5
D006
Cadmium
7440-43-9
1.0
D019
Carbon tetrachloride
56-23-5
0.5
D020
Chlordane
57-74-9
0.03
D021
Chlorobenzene
108-90-7
100.0
D022
Chloroform
67-66-3
6.0
D007
Chromium
7440-47-3
5.0
D023
o-Cresol
95-48-7
4 200.0
D024
m-Cresol
108-39-4
4 200.0
D025
p-Cresol
106-44-5
4 200.0
D026
Cresol
4 200.0
D016
2,4-D
94-75-7
10.0
D027
1,4-Dichlorobenzene
106-46-7
7.5
D028
1,2-Dichloroethane
107-06-2
0.5
D029
1,1-Dichloroethylene
75-35-4
0.7
D030
2,4-Dinitrotoluene
121-14-2
3 0.13
D012
Endrin
72-20-8
0.02
D031
Heptachlor (and its epoxide)
76-44-8
0.008
D032
Hexachlorobenzene
118-74-1
3 0.13
D033
Hexachlorobutadiene
87-68-3
0.5
D034
Hexachloroethane
67-72-1
3.0
D008
Lead
7439-92-1
5.0
D013
Lindane
58-89-9
0.4
D009
Mercury
7439-97-6
0.2
D014
Methoxychlor
72-43-5
10.0
D035
Methyl ethyl ketone
78-93-3
200.0
D036
Nitrobenzene
98-95-3
2.0
D037
Pentrachlorophenol
87-86-5
100.0
D038
Pyridine
110-86-1
3 5.0
D010
Selenium
7782-49-2
1.0
D011
Silver
7440-22-4
5.0
D039
Tetrachloroethyl-ene
127-18-4
0.7
D015
Toxaphene
8001-35-2
0.5
D040
Trichloroethyl-ene
79-01-6
0.5
D041
2,4,5-Trichlorophenol
95-95-4
400.0
D042
2,4,6-Trichlorophenol
88-06-2
2.0
D017
2,4,5-TP (Silvex)
93-72-1
1.0
D043
Vinyl chloride
75-01-4
0.2
1 Hazardous waste number.
2 Chemical abstracts service number.
3 Quantitation limit is greater than the calculated regulatory level. The quantitation limit therefore becomes the regulatory level.
4 If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/l.
[55 FR 11862, Mar. 29, 1990, as amended at 55 FR 22684, June 1, 1990; 55 FR 26987, June 29, 1990; 58 FR 46049, Aug. 31, 1993; 67 FR 11254, Mar. 13, 2002]