March 31, 2005 CODE OF FEDERAL REGULATIONS 19 Parts 0 to 140 Revised as of April 1, 2005 Customs Duties Containing a codification of documents of general applicability and future effect As of April 1, 2005 With Ancillaries

Published by

Office of the Federal Register

National Archives and Records

Administration

 A Special Edition of the Federal Register U.S. GOVERNMENT OFFICIAL EDITION NOTICE Legal Status and Use of Seals and Logos e:\seals\archives.ai

The seal of the National Archives and Records Administration (NARA) authenticates the Code of Federal Regulations (CFR) as the official codification of Federal regulations established under the Federal Register Act. Under the provisions of 44 U.S.C. 1507, the contents of the CFR, a special edition of the Federal Register, shall be judicially noticed. The CFR is prima facie evidence of the original documents published in the Federal Register (44 U.S.C. 1510).

It is prohibited to use NARA's official seal and the stylized Code of Federal Regulations logo on any republication of this material without the express, written permission of the Archivist of the United States or the Archivist's designee. Any person using NARA's official seals and logos in a manner inconsistent with the provisions of 36 CFR part 1200 is subject to the penalties specified in 18 U.S.C. 506, 701, and 1017.

Use of ISBN Prefix

This is the Official U.S. Government edition of this publication and is herein identified to certify its authenticity. Use of the 0-16 ISBN prefix is for U.S. Government Printing Office Official Editions only. The Superintendent of Documents of the U.S. Government Printing Office requests that any reprinted edition clearly be labeled as a copy of the authentic work with a new ISBN.

e:\seals\gpologo.eps

U . S . G O V E R N M E N T P R I N T I N G O F F I C E

U.S. Superintendent of Documents • Washington, DC 20402-0001

http://bookstore.gpo.gov

Phone: toll-free (866) 512-1800; DC area (202) 512-1800

 Table of Contents Page Explanation v Title 19: Chapter I—Bureau of Customs and Border Protection, Department of Homeland Security; Department of the Treasury 3 Finding Aids: Table of CFR Titles and Chapters 725 Alphabetical List of Agencies Appearing in the CFR 743 Chapter I Subject Index 753 List of CFR Sections Affected 849

Cite this Code:CFR

To cite the regulations in this volume use title, part and section number. Thus, 19 CFR 0.1 refers to title 19, part 0, section 1. Explanation

The Code of Federal Regulations is a codification of the general and permanent rules published in the Federal Register by the Executive departments and agencies of the Federal Government. The Code is divided into 50 titles which represent broad areas subject to Federal regulation. Each title is divided into chapters which usually bear the name of the issuing agency. Each chapter is further subdivided into parts covering specific regulatory areas.

Each volume of the Code is revised at least once each calendar year and issued on a quarterly basis approximately as follows:

Title 1 through Title 16

as of January 1

Title 17 through Title 27

as of April 1

Title 28 through Title 41

as of July 1

Title 42 through Title 50

as of October 1

The appropriate revision date is printed on the cover of each volume.

LEGAL STATUS

The contents of the Federal Register are required to be judicially noticed (44 U.S.C. 1507). The Code of Federal Regulations is prima facie evidence of the text of the original documents (44 U.S.C. 1510).

 HOW TO USE THE CODE OF FEDERAL REGULATIONS

The Code of Federal Regulations is kept up to date by the individual issues of the Federal Register. These two publications must be used together to determine the latest version of any given rule.

To determine whether a Code volume has been amended since its revision date (in this case, April 1, 2005), consult the “List of CFR Sections Affected (LSA),” which is issued monthly, and the “Cumulative List of Parts Affected,” which appears in the Reader Aids section of the daily Federal Register. These two lists will identify the Federal Register page number of the latest amendment of any given rule.

 EFFECTIVE AND EXPIRATION DATES

Each volume of the Code contains amendments published in the Federal Register since the last revision of that volume of the Code. Source citations for the regulations are referred to by volume number and page number of the Federal Register and date of publication. Publication dates and effective dates are usually not the same and care must be exercised by the user in determining the actual effective date. In instances where the effective date is beyond the cut-off date for the Code a note has been inserted to reflect the future effective date. In those instances where a regulation published in the Federal Register states a date certain for expiration, an appropriate note will be inserted following the text.

 OMB CONTROL NUMBERS

The Paperwork Reduction Act of 1980 (Pub. L. 96-511) requires Federal agencies to display an OMB control number with their information collection request. Many agencies have begun publishing numerous OMB control numbers as amendments to existing regulations in the CFR. These OMB numbers are placed as close as possible to the applicable recordkeeping or reporting requirements.

 OBSOLETE PROVISIONS

Provisions that become obsolete before the revision date stated on the cover of each volume are not carried. Code users may find the text of provisions in effect on a given date in the past by using the appropriate numerical list of sections affected. For the period before January 1, 2001, consult either the List of CFR Sections Affected, 1949-1963, 1964-1972, 1973-1985, or 1986-2000, published in 11 separate volumes. For the period beginning January 1, 2001, a “List of CFR Sections Affected” is published at the end of each CFR volume.

 CFR INDEXES AND TABULAR GUIDES

A subject index to the Code of Federal Regulations is contained in a separate volume, revised annually as of January 1, entitled CFR Index and Finding Aids. This volume contains the Parallel Table of Statutory Authorities and Agency Rules (Table I). A list of CFR titles, chapters, and parts and an alphabetical list of agencies publishing in the CFR are also included in this volume.

An index to the text of “Title 3—The President” is carried within that volume.

The Federal Register Index is issued monthly in cumulative form. This index is based on a consolidation of the “Contents” entries in the daily Federal Register.

A List of CFR Sections Affected (LSA) is published monthly, keyed to the revision dates of the 50 CFR titles.

 REPUBLICATION OF MATERIAL

There are no restrictions on the republication of textual material appearing in the Code of Federal Regulations.

 INQUIRIES

For a legal interpretation or explanation of any regulation in this volume, contact the issuing agency. The issuing agency's name appears at the top of odd-numbered pages.

For inquiries concerning CFR reference assistance, call 202-741-6000 or write to the Director, Office of the Federal Register, National Archives and Records Administration, Washington, DC 20408 or e-mail fedreg.info@nara.gov.

 SALES

The Government Printing Office (GPO) processes all sales and distribution of the CFR. For payment by credit card, call toll-free, 866-512-1800, or DC area, 202-512-1800, M-F 8 a.m. to 4 p.m. e.s.t. or fax your order to 202-512-2250, 24 hours a day. For payment by check, write to the Superintendent of Documents, Attn: New Orders, P.O. Box 371954, Pittsburgh, PA 15250-7954. For GPO Customer Service call 202-512-1803.

 ELECTRONIC SERVICES

The full text of the Code of Federal Regulations, the LSA (List of CFR Sections Affected), The United States Government Manual, the Federal Register, Public Laws, Public Papers, Weekly Compilation of Presidential Documents and the Privacy Act Compilation are available in electronic format at www.gpoaccess.gov/nara (“GPO Access”). For more information, contact Electronic Information Dissemination Services, U.S. Government Printing Office. Phone 202-512-1530, or 888-293-6498 (toll-free). E-mail, gpoaccess@gpo.gov.

The Office of the Federal Register also offers a free service on the National Archives and Records Administration's (NARA) World Wide Web site for public law numbers, Federal Register finding aids, and related information. Connect to NARA's web site at www.archives.gov/federal_register. The NARA site also contains links to GPO Access.

 Raymond A. Mosley, Director, Office of the Federal Register. April 1, 2005. THIS TITLE

Title 19—Customs Duties is composed of three volumes. The first two volumes, parts 0 to 140 and parts 141 to 199 contain the regulations in Chapter I—Bureau of Customs and Border Protection, Department of Homeland Security; Department of the Treasury. The third volume, part 200 to end, contains the regulations in Chapter II—United States International Trade Commission; Chapter III—International Trade Administration, Department of Commerce; and Chapter IV—Bureau of Immigration and Customs Enforcement, Department of Homeland Security. The contents of these volumes represent all current regulations issued under this title of the CFR as of April 1, 2005.

A Subject Index to Chapter I—Bureau of Customs and Border Protection, Department of Homeland Security; Department of the Treasury appears in the Finding Aids section of the first two volumes.

For this volume, Ruth Green was Chief Editor. The Code of Federal Regulations publication program is under the direction of Frances D. McDonald, assisted by Alomha S. Morris.

 <LRH>19 CFR Ch. I (4-1-05 Edition)</LRH> <RRH>Bureau of Customs and Border Protection, DHS, Treasury</RRH> <CFRTITLE> <TITLEHD> <PRTPAGE P="1"/> <HD SOURCE="HED">Title 19—Customs Duties</HD> <P>(This book contains parts 0 to 140)</P> </TITLEHD> <CFRTOC> <PTHD>Part</PTHD> <CHAPTI> <SUBJECT> <E T="04">chapter i</E>—Bureau of Customs and Border Protection, Department of Homeland Security, Department of the Treasury</SUBJECT> <PG>0</PG> </CHAPTI> </CFRTOC> </CFRTITLE> <CHAPTER> <TOC> <TOCHD> <PRTPAGE P="3"/> <HD SOURCE="HED">CHAPTER I—BUREAU OF CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY</HD> </TOCHD> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to chapter I appear at T.D. 95-77, 60 FR 50021, Sept. 27, 1995.</P> </EDNOTE> <PTHD>Part</PTHD> <PGHD>Page</PGHD> <CHAPTI> <PT>0</PT> <SUBJECT>Transferred or delegated authority</SUBJECT> <PG>5</PG> <PT>1-3</PT> <RESERVED>[Reserved]</RESERVED> <PT>4</PT> <SUBJECT>Vessels in foreign and domestic trades</SUBJECT> <PG>7</PG> <PT>7</PT> <SUBJECT>Customs relations with insular possessions and Guantanamo Bay Naval Station</SUBJECT> <PG>75</PG> <PT>10</PT> <SUBJECT>Articles conditionally free, subject to a reduced rate, etc.</SUBJECT> <PG>81</PG> <PT>11</PT> <SUBJECT>Packing and stamping; marking</SUBJECT> <PG>252</PG> <PT>12</PT> <SUBJECT>Special classes of merchandise</SUBJECT> <PG>257</PG> <PT>18</PT> <SUBJECT>Transportation in bond and merchandise in transit</SUBJECT> <PG>316</PG> <PT>19</PT> <SUBJECT>Customs warehouses, container stations and control of merchandise therein</SUBJECT> <PG>334</PG> <PT>24</PT> <SUBJECT>Customs financial and accounting procedure</SUBJECT> <PG>370</PG> <PT>54</PT> <SUBJECT>Certain importations temporarily free of duty</SUBJECT> <PG>424</PG> <PT>101</PT> <SUBJECT>General provisions</SUBJECT> <PG>426</PG> <PT>102</PT> <SUBJECT>Rules of origin</SUBJECT> <PG>439</PG> <PT>103</PT> <SUBJECT>Availability of information</SUBJECT> <PG>480</PG> <PT>111</PT> <SUBJECT>Customs brokers</SUBJECT> <PG>502</PG> <PT>112</PT> <SUBJECT>Carriers, cartmen, and lightermen</SUBJECT> <PG>526</PG> <PT>113</PT> <SUBJECT>Customs bonds</SUBJECT> <PG>534</PG> <PT>114</PT> <SUBJECT>Carnets</SUBJECT> <PG>560</PG> <PT>115</PT> <SUBJECT>Cargo container and road vehicle certification pursuant to international customs conventions</SUBJECT> <PG>565</PG> <PT>118</PT> <SUBJECT>Centralized examination stations</SUBJECT> <PG>575</PG> <PT>122</PT> <SUBJECT>Air Commerce regulations</SUBJECT> <PG>580</PG> <PT>123</PT> <SUBJECT>Customs relations with Canada and Mexico</SUBJECT> <PG>638</PG> <PT>125</PT> <SUBJECT>Cartage and lighterage of merchandise</SUBJECT> <PG>666</PG> <PT>127</PT> <SUBJECT>General order, unclaimed, and abandoned merchandise</SUBJECT> <PG>670<PRTPAGE P="4"/> </PG> <PT>128</PT> <SUBJECT>Express consignments</SUBJECT> <PG>679</PG> <PT>132</PT> <SUBJECT>Quotas</SUBJECT> <PG>683</PG> <PT>133</PT> <SUBJECT>Trademarks, trade names, and copyrights</SUBJECT> <PG>691</PG> <PT>134</PT> <SUBJECT>Country of origin marking</SUBJECT> <PG>706</PG> <PT>135-140</PT> <RESERVED>[Reserved]</RESERVED> </CHAPTI> </TOC> <PART> <PRTPAGE P="5"/> <EAR>Pt. 0</EAR> <HD SOURCE="HED">PART 0—TRANSFERRED OR DELEGATED AUTHORITY</HD> <CONTENTS> <SECHD>Sec.</SECHD> <SECTNO>0.1</SECTNO> <SUBJECT>Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security.</SUBJECT> <SECTNO>0.2</SECTNO> <SUBJECT>All other Customs Regulations issued under the authority of the Department of Homeland Security.</SUBJECT> <APP>Appendix to Part 0—Treasury Department Order No. 100-16 </APP> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>5 U.S.C. 301, 6 U.S.C. 101 <E T="03">et seq.,</E> 19 U.S.C. 66, 19 U.S.C. 1624, 31 U.S.C. 321.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>CBP Dec. 03-24, 68 FR 51869, Aug. 28, 2003, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 0.1</SECTNO> <SUBJECT>Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security.</SUBJECT> <P>(a) <E T="03">Regulations requiring signatures of Treasury and Homeland Security.</E> (1) By Treasury Department Order No. 100-16, set forth in the appendix to this part, the Secretary of the Treasury has delegated to the Secretary of Homeland Security the authority to prescribe all Customs regulations relating to customs revenue functions, except that the Secretary of the Treasury retains the sole authority to approve such Customs regulations concerning subject matters listed in paragraph 1(a)(i) of the order. Regulations for which the Secretary of the Treasury retains the sole authority to approve will be signed by the Secretary of Homeland Security (or his or her DHS delegate), and by the Secretary of the Treasury (or his or her Treasury delegate) to indicate approval.</P> <P>(2) When a regulation described in paragraph (a)(1) of this section is published in the <E T="04">Federal Register,</E> the preamble of the document accompanying the regulation will clearly indicate that it is being issued in accordance with paragraph (a)(1) of this section.</P> <P>(b) <E T="03">Regulations with respect to which the Department of Homeland Security is authorized to sign for the Department of the Treasury.</E> (1) By Treasury Department Order No. 100-16, set forth in the appendix to this part, the Secretary of the Treasury delegated to the Secretary of Homeland Security the authority to prescribe and approve regulations relating to customs revenue functions on behalf of the Secretary of the Treasury when the subject matter of the regulations is not listed in paragraph 1(a)(i) of the order. Such regulations are the official regulations of both Departments notwithstanding that they are not signed by an official of the Department of the Treasury. These regulations will be signed by the Secretary of Homeland Security (or his or her DHS delegate).</P> <P>(2) When a regulation described in paragraph (b)(1) of this section is published in the <E T="04">Federal Register,</E> the preamble of the document accompanying the regulation will clearly indicate that it is being issued in accordance with paragraph (b)(1) of this section.</P> <P>(c) <E T="03">Sole signature by Secretary of the Treasury.</E> (1) Pursuant to Treasury Department Order No. 100-16, set forth in the appendix to this part, the Secretary of the Treasury reserves the right to promulgate regulations related to the customs revenue functions. Such regulations are signed by the Secretary of the Treasury (or his or her delegate) after consultation with the Secretary of Homeland Security (or his or her delegate), and are the official regulations of both Departments.</P> <P>(2) When a regulation described in paragraph (c)(1) of this section is published in the <E T="04">Federal Register,</E> the preamble of the document accompanying the regulation will clearly indicate that the regulation is being issued in accordance with paragraph (c)(1) of this section.</P> </SECTION> <SECTION> <SECTNO>§ 0.2</SECTNO> <SUBJECT>All other Customs regulations issued under the authority of the Department of Homeland Security.</SUBJECT> <P>(a) The authority of the Secretary of the Treasury with respect to Customs regulations that are not related to customs revenue functions was transferred to the Secretary of Homeland Security pursuant to section 403(1) of the Homeland Security Act of 2002. Such regulations are signed by the Secretary of Homeland Security (or his or her delegate) and are the official regulations of the Department of Homeland Security.<PRTPAGE P="6"/> </P> <P>(b) When a regulation described in paragraph (a) of this section is published in the <E T="04">Federal Register,</E> the preamble accompanying the regulation shall clearly indicate that it is being issued in accordance with paragraph (a) of this section.</P> </SECTION> <APPENDIX> <EAR>Pt. 0, App.</EAR> <HD SOURCE="HED">Appendix to 19 CFR Part 0—Treasury Department Order No. 100-16</HD> <P>Delegation from the Secretary of the Treasury to the Secretary of Homeland Security of general authority over Customs revenue functions vested in the Secretary of the Treasury as set forth in the Homeland Security Act of 2002. </P> <FP SOURCE="FP-1">Treasury Department, Washington, DC,</FP> <FP SOURCE="FP-1">May 15, 2003.</FP> <P>By virtue of the authority vested in me as the Secretary of the Treasury, including the authority vested by 31 U.S.C. 321(b) and section 412 of the Homeland Security Act of 2002 (Pub. L. 107-296) (Act), it is hereby ordered:</P> <P>1. Consistent with the transfer of the functions, personnel, assets, and liabilities of the United States Customs Service to the Department of Homeland Security as set forth in section 403(1) of the Act, there is hereby delegated to the Secretary of Homeland Security the authority related to the Customs revenue functions vested in the Secretary of the Treasury as set forth in sections 412 and 415 of the Act, subject to the following exceptions and to paragraph 6 of this Delegation of Authority:</P> <P>(a)(i) The Secretary of the Treasury retains the sole authority to approve any regulations concerning import quotas or trade bans, user fees, marking, labeling, copyright and trademark enforcement, and the completion of entry or substance of entry summary including duty assessment and collection, classification, valuation, application of the U.S. Harmonized Tariff Schedules, eligibility or requirements for preferential trade programs, and the establishment of recordkeeping requirements relating thereto. The Secretary of Homeland Security shall provide a copy of all regulations so approved to the Chairman and Ranking Member of the Committee on Ways and Means and the Chairman and Ranking Member of the Committee on Finance every six months.</P> <P>(ii) The Secretary of the Treasury shall retain the authority to review, modify, or revoke any determination or ruling that falls within the criteria set forth in paragraph 1(a)(i), and that is under consideration pursuant to the procedures set forth in sections 516 and 625(c) of the Tariff Act of 1930, as amended (19 U.S.C. 1516 and 1625(c)). The Secretary of Homeland Security periodically shall identify and describe for the Secretary of the Treasury such determinations and rulings that are under consideration under sections 516 and 625(c) of the Tariff Act of 1930, as amended, in an appropriate and timely manner, with consultation as necessary, prior to the Secretary of Homeland Security's exercise of such authority. The Secretary of Homeland Security shall provide a copy of these identifications and descriptions so made to the Chairman and Ranking Member of the Committee on Ways and Means and the Chairman and Ranking Member of the Committee on Finance every six months. The Secretary of the Treasury shall list any case where Treasury modified or revoked such a determination or ruling.</P> <P>(b) Paragraph 1(a) notwithstanding, if the Secretary of Homeland Security finds an overriding, immediate, and extraordinary security threat to public health and safety, the Secretary of Homeland Security may take action described in paragraph 1(a) without the prior approval of the Secretary of the Treasury. However, immediately after taking any such action, the Secretary of Homeland Security shall certify in writing to the Secretary of the Treasury and to the Chairman and Ranking Member of the Committee on Ways and Means and the Chairman and Ranking Member of the Committee on Finance the specific reasons therefor. The action shall terminate within 14 days or as long as the overriding, immediate, and extraordinary security threat exists, whichever is shorter, unless the Secretary of the Treasury approves the continued action and provides notice of such approval to the Secretary of Homeland Security.</P> <P>(c) The Advisory Committee on Commercial Operations of the Customs Service (COAC) shall be jointly appointed by the Secretary of the Treasury and the Secretary of Homeland Security. Meetings of COAC shall be presided over jointly by the Secretary of the Treasury and the Secretary of Homeland Security. The COAC shall advise the Secretary of the Treasury and the Secretary of Homeland Security jointly.</P> <P>2. Any references in this Delegation of Authority to the Secretary of the Treasury or the Secretary of Homeland Security are deemed to include their respective delegees, if any.</P> <P>3. This Delegation of Authority is not intended to create or confer any right, privilege, or benefit on any private person, including any person in litigation with the United States.</P> <P>4. Treasury Order No. 165-09, “Maintenance of delegation in respect to general authority over Customs Revenue functions vested in the Secretary of the Treasury, as set forth and defined in the Homeland Security Act of 2002,” dated February 28, 2003, is rescinded. To the extent this Delegation of Authority requires any revocation of any other prior Order or Directive of the Secretary of the Treasury, such prior Order or Directive is hereby revoked.<PRTPAGE P="7"/> </P> <P>5. This Delegation of Authority is effective May 15, 2003. This Delegation is subject to review on May 14, 2004. By March 15, 2004, the Secretary of the Treasury and the Secretary of Homeland Security shall consult with the Chairman and Ranking Member of the Committee on Ways and Means and the Chairman and Ranking Member of the Committee on Finance to discuss the upcoming review of this Delegation.</P> <P>6. The Secretary of the Treasury reserves the right to rescind or modify this Delegation of Authority, promulgate regulations, or exercise authority at any time based upon the statutory authority reserved to the Secretary by the Act. </P> <FP SOURCE="FP-1">John W. Snow, <E T="03">Secretary of the Treasury.</E> </FP> </APPENDIX> </PART> <PART> <RESERVED>PARTS 1-3 [RESERVED]</RESERVED> </PART> <PART> <EAR>Pt. 4</EAR> <HD SOURCE="HED">PART 4—VESSELS IN FOREIGN AND DOMESTIC TRADES</HD> <CONTENTS> <SUBJGRP> <HD SOURCE="HED">Arrival and Entry of Vessels</HD> <SECHD>Sec.</SECHD> <SECTNO>4.0</SECTNO> <SUBJECT>General definitions.</SUBJECT> <SECTNO>4.1</SECTNO> <SUBJECT>Boarding of vessels; cutter and dock passes.</SUBJECT> <SECTNO>4.2</SECTNO> <SUBJECT>Reports of arrival of vessels.</SUBJECT> <SECTNO>4.3</SECTNO> <SUBJECT>Vessels required to enter; place of entry.</SUBJECT> <SECTNO>4.3a</SECTNO> <SUBJECT>Penalties for violation of vessel reporting and entry requirements.</SUBJECT> <SECTNO>4.4</SECTNO> <SUBJECT>Panama Canal; report of arrival required.</SUBJECT> <SECTNO>4.5</SECTNO> <SUBJECT>Government vessels.</SUBJECT> <SECTNO>4.6</SECTNO> <SUBJECT>Departure or unlading before report or entry.</SUBJECT> <SECTNO>4.7</SECTNO> <SUBJECT>Inward foreign manifest; production on demand; contents and form; advance filing of cargo declaration.</SUBJECT> <SECTNO>4.7a</SECTNO> <SUBJECT>Inward manifest; information required; alternative forms.</SUBJECT> <SECTNO>4.8</SECTNO> <SUBJECT>Preliminary entry.</SUBJECT> <SECTNO>4.9</SECTNO> <SUBJECT>Formal entry.</SUBJECT> <SECTNO>4.10</SECTNO> <SUBJECT>Request for overtime services.</SUBJECT> <SECTNO>4.11</SECTNO> <SUBJECT>Sealing of stores.</SUBJECT> <SECTNO>4.12</SECTNO> <SUBJECT>Explanation of manifest discrepancy.</SUBJECT> <SECTNO>4.13</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>4.14</SECTNO> <SUBJECT>Equipment purchases by, and repairs to, American vessels.</SUBJECT> <SECTNO>4.15</SECTNO> <SUBJECT>Fishing vessels touching and trading at foreign places.</SUBJECT> <SECTNO>4.16</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>4.17</SECTNO> <SUBJECT>Vessels from discriminating countries.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Tonnage Tax and Light Money</HD> <SECTNO>4.20</SECTNO> <SUBJECT>Tonnage taxes.</SUBJECT> <SECTNO>4.21</SECTNO> <SUBJECT>Exemptions from tonnage taxes.</SUBJECT> <SECTNO>4.22</SECTNO> <SUBJECT>Exemptions from special tonnage taxes.</SUBJECT> <SECTNO>4.23</SECTNO> <SUBJECT>Certificate of payment and cash receipt.</SUBJECT> <SECTNO>4.24</SECTNO> <SUBJECT>Application for refund of tonnage tax.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Landing and Delivery of Cargo</HD> <SECTNO>4.30</SECTNO> <SUBJECT>Permits and special licenses for unlading and lading.</SUBJECT> <SECTNO>4.31</SECTNO> <SUBJECT>Unlading or transshipment due to casualty.</SUBJECT> <SECTNO>4.32</SECTNO> <SUBJECT>Vessels in distress, landing of cargo.</SUBJECT> <SECTNO>4.33</SECTNO> <SUBJECT>Diversion of cargo.</SUBJECT> <SECTNO>4.34</SECTNO> <SUBJECT>Prematurely discharged, overcarried, and undelivered cargo.</SUBJECT> <SECTNO>4.35</SECTNO> <SUBJECT>Unlading outside port of entry.</SUBJECT> <SECTNO>4.36</SECTNO> <SUBJECT>Delayed discharge of cargo.</SUBJECT> <SECTNO>4.37</SECTNO> <SUBJECT>General order.</SUBJECT> <SECTNO>4.38</SECTNO> <SUBJECT>Release of cargo.</SUBJECT> <SECTNO>4.39</SECTNO> <SUBJECT>Stores and equipment of vessels and crews' effects; unlading or lading and retention on board.</SUBJECT> <SECTNO>4.40</SECTNO> <SUBJECT>Equipment, etc., from wrecked or dismantled vessels.</SUBJECT> <SECTNO>4.41</SECTNO> <SUBJECT>Cargo of wrecked vessel.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Passengers on Vessels</HD> <SECTNO>4.50</SECTNO> <SUBJECT>Passenger lists.</SUBJECT> <SECTNO>4.51</SECTNO> <SUBJECT>Reporting requirements for individuals arriving by vessel.</SUBJECT> <SECTNO>4.52</SECTNO> <SUBJECT>Penalties applicable to individuals.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Foreign Clearances</HD> <SECTNO>4.60</SECTNO> <SUBJECT>Vessels required to clear.</SUBJECT> <SECTNO>4.61</SECTNO> <SUBJECT>Requirements for clearance.</SUBJECT> <SECTNO>4.62</SECTNO> <SUBJECT>Accounting for inward cargo.</SUBJECT> <SECTNO>4.63</SECTNO> <SUBJECT>Outward cargo declaration; shippers' export declarations.</SUBJECT> <SECTNO>4.64</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>4.65</SECTNO> <SUBJECT>Verification of nationality and tonnage.</SUBJECT> <SECTNO>4.65a</SECTNO> <SUBJECT>Load lines.</SUBJECT> <SECTNO>4.66</SECTNO> <SUBJECT>Verification of inspection.</SUBJECT> <SECTNO>4.66a</SECTNO> <SUBJECT>Illegal discharge of oil and hazardous substances.</SUBJECT> <SECTNO>4.66b</SECTNO> <SUBJECT>Pollution of coastal and navigable waters.</SUBJECT> <SECTNO>4.66c</SECTNO> <SUBJECT>Oil pollution by oceangoing vessels.</SUBJECT> <SECTNO>4.67</SECTNO> <SUBJECT>Closed ports or places.</SUBJECT> <SECTNO>4.68</SECTNO> <SUBJECT>Federal Maritime Commission certificates for certain passengers vessels.</SUBJECT> <SECTNO>4.69</SECTNO> <SUBJECT>Shipping articles.</SUBJECT> <SECTNO>4.70</SECTNO> <SUBJECT>Public Health Service requirements.</SUBJECT> <SECTNO>4.71</SECTNO> <SUBJECT>Inspection of livestock.</SUBJECT> <SECTNO>4.72</SECTNO> <SUBJECT>Inspection of meat, meat-food products, and inedible fats.</SUBJECT> <SECTNO>4.73</SECTNO> <SUBJECT>Neutrality; exportation of arms and munitions.</SUBJECT> <SECTNO>4.74</SECTNO> <SUBJECT>Transportation orders.</SUBJECT> <SECTNO>4.75</SECTNO> <SUBJECT>Incomplete manifest; incomplete export declarations; bond.</SUBJECT> <SECTNO>4.76</SECTNO> <SUBJECT>Procedures and responsibilities of carriers filing outbound vessel manifest information via the AES.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Coastwise Procedure</HD> <SECTNO>4.80</SECTNO> <SUBJECT>Vessels entitled to engage in coastwise trade.</SUBJECT> <SECTNO>4.80a</SECTNO> <SUBJECT>Coastwise transportation of passengers.</SUBJECT> <SECTNO>4.80b</SECTNO> <SUBJECT>Coastwise transportation of merchandise.<PRTPAGE P="8"/> </SUBJECT> <SECTNO>4.81</SECTNO> <SUBJECT>Reports of arrivals and departures in coastwise trade.</SUBJECT> <SECTNO>4.81a</SECTNO> <SUBJECT>Certain barges carrying merchandise transferred from another barge.</SUBJECT> <SECTNO>4.82</SECTNO> <SUBJECT>Touching at foreign port while in coastwise trade.</SUBJECT> <SECTNO>4.83</SECTNO> <SUBJECT>Trade between United States ports on the Great Lakes and other ports of the United States.</SUBJECT> <SECTNO>4.84</SECTNO> <SUBJECT>Trade with noncontiguous territory.</SUBJECT> <SECTNO>4.85</SECTNO> <SUBJECT>Vessels with residue cargo for domestic ports.</SUBJECT> <SECTNO>4.86</SECTNO> <SUBJECT>Intercoastal residue—cargo procedure; optional ports.</SUBJECT> <SECTNO>4.87</SECTNO> <SUBJECT>Vessels proceeding foreign via domestic ports.</SUBJECT> <SECTNO>4.88</SECTNO> <SUBJECT>Vessels with residue cargo for foreign ports.</SUBJECT> <SECTNO>4.89</SECTNO> <SUBJECT>Vessels in foreign trade proceeding via domestic ports and touching at intermediate foreign ports.</SUBJECT> <SECTNO>4.90</SECTNO> <SUBJECT>Simultaneous vessel transactions.</SUBJECT> <SECTNO>4.91</SECTNO> <SUBJECT>Diversion of vessel; transshipment of cargo.</SUBJECT> <SECTNO>4.92</SECTNO> <SUBJECT>Towing.</SUBJECT> <SECTNO>4.93</SECTNO> <SUBJECT>Coastwise transportation by certain vessels of empty vans, tanks, and barges, equipment for use with vans and tanks; empty instruments of international traffic; stevedoring equipment and material; procedures.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">General</HD> <SECTNO>4.94</SECTNO> <SUBJECT>Yacht privileges and obligations.</SUBJECT> <SECTNO>4.94a</SECTNO> <SUBJECT>Large yachts imported for sale.</SUBJECT> <SECTNO>4.95</SECTNO> <SUBJECT>Records of entry and clearance of vessels.</SUBJECT> <SECTNO>4.96</SECTNO> <SUBJECT>Fisheries.</SUBJECT> <SECTNO>4.97</SECTNO> <SUBJECT>Salvage vessels.</SUBJECT> <SECTNO>4.98</SECTNO> <SUBJECT>Navigation fees.</SUBJECT> <SECTNO>4.99</SECTNO> <SUBJECT>Forms; substitution.</SUBJECT> <SECTNO>4.100</SECTNO> <SUBJECT>Licensing of vessels of less than 30 net tons.</SUBJECT> <SECTNO>4.101</SECTNO> <SUBJECT>Prohibitions against Customs officers and employees.</SUBJECT> </SUBJGRP> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>5 U.S.C. 301; 19 U.S.C. 66, 1431, 1433, 1434, 1624, 2071 note; 46 U.S.C. App. 3, 91;</P> <P>Section 4.1 also issued under 19 U.S.C. 1581(a), 46 U.S.C. App. 163;</P> <P>Section 4.2 also issued under 19 U.S.C. 1441, 1486;</P> <P>Section 4.3 also issued under 19 U.S.C. 288, 1441; 46 U.S.C. App. 111;</P> <P>Section 4.3a also issued under 19 U.S.C. 1433, 1436;</P> <P>Section 4.5 also issued under 19 U.S.C. 1441;</P> <P>Section 4.7 also issued under 19 U.S.C. 1581(a); 46 U.S.C. App. 883a, 883b;</P> <P>Section 4.7a also issued under 19 U.S.C. 1498, 1584;</P> <P>Section 4.8 also issued under 19 U.S.C. 1448, 1486;</P> <P>Section 4.9 also issued under 42 U.S.C. 269;</P> <P>Section 4.10 also issued under 19 U.S.C. 1448, 1451;</P> <P>Section 4.12 also issued under 19 U.S.C. 1584;</P> <P>Section 4.14 also issued under 19 U.S.C. 1466, 1498;</P> <P>Section 4.20 also issued under 46 U.S.C. 2107(b), 8103, 14306, 14502, 14511, 14512, 14513, 14701, 14702, 46 U.S.C. App. 121, 128;</P> <P>Section 4.21 also issued under 19 U.S.C. 1441, 46 U.S.C. App. 121-125, 128, 129, 132, 135;</P> <P>Section 4.22 also issued under 46 U.S.C. App. 121, 128, 141;</P> <P>Section 4.24 also issued under 46 U.S.C. 2108;</P> <P>Section 4.30 also issued under 19 U.S.C. 288, 1446, 1448, 1450-1454, 1490;</P> <P>Section 4.31 also issued under 19 U.S.C. 1453, 1586;</P> <P>Section 4.32 also issued under 19 U.S.C. 1449;</P> <P>Section 4.35 also issued under 19 U.S.C. 1447;</P> <P>Section 4.36 also issued under 19 U.S.C. 1431, 1457, 1458, 46 U.S.C. App. 100;</P> <P>Section 4.37 also issued under 19 U.S.C. 1448, 1457, 1490;</P> <P>Section 4.38 also issued under 19 U.S.C. 1448, 1505;</P> <P>Section 4.39 also issued under 19 U.S.C. 1446;</P> <P>Section 4.40 also issued under 19 U.S.C. 1446;</P> <P>Section 4.50 also issued under 19 U.S.C. 1431; 46 U.S.C. 3502;</P> <P>Section 4.51 also issued under 19 U.S.C. 1433;</P> <P>Section 4.52 also issued under 19 U.S.C. 1433;</P> <P>Section 4.61 also issued under 46 U.S.C. App. 883;</P> <P>Section 4.65a also issued under 46 U.S.C. 5101-5102, 5106-5109, 5112-5114, 5116;</P> <P>Section 4.66 also issued under 46 U.S.C. App. 91;</P> <P>Section 4.66a also issued under 33 U.S.C. 1321, 46 U.S.C. App. 91;</P> <P>Section 4.66b also issued under 33 U.S.C. 407, 1321;</P> <P>Section 4.68 also issued under 46 U.S.C. App. 817d, 817e;</P> <P>Section 4.69 also issued under 46 U.S.C. 10301, 10302, 10314, and 10315.</P> <P>Section 4.74 also issued under 46 U.S.C. App. 91;</P> <P>Section 4.75 also issued under 46 U.S.C. App. 91;</P> <P>Section 4.80 also issued under 28 U.S.C. 2461 note; 46 U.S.C. 12106; 46 U.S.C. App. 251, 289, 319, 802, 808, 883, 883-1;</P> <P>Section 4.81 also issued under 19 U.S.C. 1442, 1486; 46 U.S.C. 251, 883;</P> <P>Section 4.81a also issued under 46 U.S.C. App. 883;</P> <P>Section 4.82 also issued under 19 U.S.C. 293, 294, 46 U.S.C. App. 123;</P> <P>Section 4.83 also issued under 46 U.S.C. App. 91, 111, 123;<PRTPAGE P="9"/> </P> <P>Section 4.84 also issued under 46 U.S.C. App. 883-1;</P> <P>Section 4.85 also issued under 19 U.S.C. 1442, 1623;</P> <P>Section 4.86 also issued under 19 U.S.C. 1442;</P> <P>Section 4.88 also issued under 19 U.S.C. 1442, 1622, 1623;</P> <P>Section 4.92 also issued under 28 U.S.C. 2461 note; 46 U.S.C. App. 316(a);</P> <P>Section 4.93 also issued under 19 U.S.C. 1322(a), 46 U.S.C. App. 883;</P> <P>Section 4.94 also issued under 19 U.S.C. 1441; 46 U.S.C. App. 104;</P> <P>Section 4.94a also issued under 19 U.S.C. 1484b;</P> <P>Section 4.96 also issued under 46 U.S.C. 12101(a)(1), 12108, 46 U.S.C. App. 251;</P> <P>Section 4.98 also issued under 31 U.S.C. 9701;</P> <P>Section 4.100 also issued under 19 U.S.C. 1706.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>28 FR 14596, Dec. 31, 1963, unless otherwise noted.</P> </SOURCE> <SUBJGRP> <HD SOURCE="HED">Arrival and Entry of Vessels</HD> <SECTION> <SECTNO>§ 4.0</SECTNO> <SUBJECT>General definitions.</SUBJECT> <P>For the purposes of this part:</P> <P>(a) <E T="03">Vessel.</E> The word <E T="03">vessel</E> includes every description of water craft or other contrivance used or capable of being used as a means of transportation on water, but does not include aircraft. (19 U.S.C. 1401.)</P> <P>(b) <E T="03">Vessel of the United States.</E> The term <E T="03">vessel of the United States</E> means any vessel documented under the laws of the United States.</P> <P>(c) <E T="03">Documented.</E> The term <E T="03">documented</E> vessel means a vessel for which a valid Certificate of Documentation, form CG 1270, issued by the U.S. Coast Guard is outstanding. Upon qualification and proper application to the appropriate Coast Guard office, the Certificate of Documentation may be endorsed with a: (1) Registry endorsement (generally, available to a vessel to be employed in foreign trade, trade with Guam, American Samoa, Wake, Midway, or Kingman Reef, and other employments for which another endorsement is not required), (2) coastwise endorsement (generally, entitles a vessel to employment in the coastwise trade, and other employments for which another endorsement is not required), (3) Great Lakes endorsement (generally, entitles a vessel to engage in the coastwise trade on the Great Lakes and their tributary and connecting waters, in trade with Canada, and in other employments for which another endorsement is not required), (4) fishery endorsement (generally, subject to federal and state laws regulating the fisheries, entitles a vessel to fish within the Exclusive Economic Zone (16 U.S.C. 1811) and landward of that zone and to land its catch) or (5) recreational endorsement (entitles a vessel to recreational use only). Any other terminology used elsewhere in this part to describe the particular documentation of a vessel shall be read as synonymous with the applicable terminology contained in this paragraph. Generally, any vessel of at least 5 net tons and wholly owned by a United States citizen or citizens is eligible for documentation except that for a coastwise, Great Lakes, or fisheries endorsement a vessel must also be built in the United States. Detailed Coast Guard regulations on documentation are set forth in Title 46, Code of Federal Regulations, § 67.01-67.45.</P> <P>(d) <E T="03">Noncontiguous territory of the United States.</E> The term <E T="03">noncontiguous territory of the United States</E> includes all the island territories and possessions of the United States, but does not include the Canal Zone.</P> <P>(e) <E T="03">Citizen.</E> The word <E T="03">citizen</E> is as defined by the U.S. Coast Guard for purposes of vessel documentation (see subpart 67.03 of title 46, Code of Federal Regulations.)</P> <P>(f) <E T="03">Arrival of a vessel.</E> The phrase “arrival of a vessel” means that time when the vessel first comes to rest, whether at anchor or at a dock, in any harbor within the Customs territory of the U.S.</P> <P>(g) <E T="03">Departure of a vessel.</E> The phrase “departure of a vessel” means that time when the vessel gets under way on its outward voyage and proceeds on the voyage without thereafter coming to rest in the harbor from which it is going.</P> <CITA>[T.D. 69-266, 34 FR 20422, Dec. 31, 1969, as amended by T.D. 83-214, 48 FR 46511, Oct. 13, 1983; T.D. 93-78, 58 FR 50256, Sept. 27, 1993; T.D. 93-96, 58 FR 67315, Dec. 21, 1993]</CITA> </SECTION> <SECTION> <PRTPAGE P="10"/> <SECTNO>§ 4.1</SECTNO> <SUBJECT>Boarding of vessels; cutter and dock passes.</SUBJECT> <P>(a)<FTREF/> Every vessel arriving at a Customs port will be subject to such supervision while in port as the port director considers necessary. The port director may detail Customs officers to remain on board a vessel to secure enforcement of the requirements set forth in this part. Customs may determine to board as many vessels as considered necessary to ensure compliance with the laws it enforces.</P> <FTNT> <P> <E T="51">1-27</E> [Reserved]</P> </FTNT> <P>(b)(1) No person, with or without the consent of the master, except a pilot in connection with the navigation of the vessel, personnel from another vessel in connection with the navigation of an unmanned barge, an officer of Customs or the Coast Guard, an immigration or health officer, an inspector of the Animal and Plant Health Inspection Service of the U.S. Department of Agriculture, or an agent of the vessel or consular officer exclusively for purposes relating to Customs formalities, shall go on board any vessel arriving from outside the Customs territory of the United States without permission of the port director or the Customs officer in charge until the vessel has been taken in charge by a Customs officer.</P> <P>(2) A person may leave the vessel for the purpose of reporting its arrival as required by law (see § 4.2), but no other person, except those designated in paragraph (b)(1) of this section, shall leave any vessel arriving from outside the Customs territory of the United States, with or without the consent of the master, without the permission of the port director or the Customs officer in charge until the vessel has been properly inspected by Customs and brought into the dock or anchorage at which cargo is to be unladen and until all passengers have been landed from the vessel (19 U.S.C. 1433).</P> <P>(3) Every person permitted to go on board or to leave without the consent of a Customs officer under the provisions of this paragraph shall be subject to Customs and quarantine regulations.</P> <P>(4) The master of any vessel shall not authorize the boarding or leaving of his vessel by any person in violation of this paragraph.</P> <P>(c) A port director, in his discretion may issue a cutter pass on Customs Form 3093 to permit the holder to board an incoming vessel after it has been inspected by the quarantine authorities and taken in charge by an officer of the Customs, as follows: (1) To persons on official business; (2) to news reporters, newspaper photographers, photographers of established motionpicture companies, and broadcasters of established radio broadcasting cmmpanies; and (3) in cases of special exigency in which the port director is satisfied as to the urgent need for the boarding and that its allowance will not result in undue interference with the performance of official business.</P> <P>(d) No person in charge of a tugboat, rowboat, or other vessel shall bring such conveyance alongside an incoming vessel heretofore described and put on board thereof any person, except as authorized by law or regulations.</P> <P>(e) [Reserved]</P> <P>(f) Term cutter and dock passes, for a period of not to exceed one year, may be issued in the discretion of the port director, to persons on official business and to duly accredited news reporters and newspaper photographers. Passes are not transferable and shall be forfeited upon presentation by others than those to whom issued.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 78-141, 43 FR 22174, May 24, 1978; T.D. 82-224, 47 FR 35475, Aug. 16, 1982; T.D. 92-74, 57 FR 35751, Aug. 11, 1992; T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 00-4, 65 FR 2872, Jan. 19, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.2</SECTNO> <SUBJECT>Reports of arrival of vessels.</SUBJECT> <P>(a) Upon arrival in any port or place within the U.S., including, for purposes of this section, the U.S. Virgin Islands, of any vessel from a foreign port or place, any foreign vessel from a port or place within the U.S., or any vessel of the U.S. carrying bonded merchandise or foreign merchandise for which entry has not been made, the master of the vessel shall immediately report that arrival to the nearest Customs facility or other location designated by the <PRTPAGE P="11"/>port director. The report of arrival, except as supplemented in local instructions issued by the port director and made available to interested parties by posting in Customs offices, publication in a newspaper of general circulation, and other appropriate means, shall be made by any means of communication to the port director or to a Customs officer assigned to board the vessel. The Customs officer may require the production of any documents or papers deemed necessary for the proper inspection/examination of the vessel, cargo, passenger, or crew.</P> <P>(b) For purposes of this part, “foreign port or place” includes a hovering vessel, as defined in 19 U.S.C. 1401(k), and any point in Customs waters beyond the territorial sea or on the high seas at which a vessel arriving in a port or place in the U.S. has received merchandise.</P> <P>(c) In the case of certain vessels arriving either in distress or for the limited purpose of taking on certain supplies and departing within a 24-hour time period without having landed or taken on any passengers or other merchandise (see section 441(4), Tariff Act of 1930, as amended), the report may be filed by either the master, owner, or agent, and shall be in the form and give the information required by that statute, except that the report need not be under oath. A derelict vessel shall be considered one in distress and any person bringing it into port may report its arrival.</P> <P>(d) The report of baggage and merchandise required to be made by certain passenger vessels making three or more trips a week between U.S. and foreign ports and vessels used exclusively as ferryboats carrying passengers, baggage, or merchandise (see section 441(2), Tariff Act of 1930, as amended), is in addition to the required report of arrival, and shall be made within 24 hours of arrival.</P> <CITA>[T.D. 93-96, 58 FR 67315, Dec. 21, 1993, as amended by T.D. 94-44, 59 FR 23795, May 9, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.3</SECTNO> <SUBJECT>Vessels required to enter; place of entry.</SUBJECT> <P>(a) <E T="03">Formal entry required.</E> Unless specifically excepted by law, within 48 hours after the arrival at any port or place in the United States, the following vessels are required to make formal entry:</P> <P>(1) Any vessel from a foreign port or place;</P> <P>(2) Any foreign vessel from a domestic port;</P> <P>(3) Any vessel of the United States having merchandise on board which is being transported in-bond (not including bonded ship's stores or supplies), or foreign merchandise for which entry has not been made; or</P> <P>(4) Any vessel which has visited a hovering vessel as defined in 19 U.S.C. 1401(k), or has delivered or received merchandise or passengers while outside the territorial sea.</P> <P>(b) <E T="03">Completion of entry.</E> (1) When vessel entry is to be made at the customhouse, either the master, licensed deck officer, or purser may appear in person during regular working hours to complete preliminary or formal vessel entry; or necessary documents properly executed by the master or other authorized officer may be delivered at the customhouse by the vessel agent or other personal representative of the master.</P> <P>(2) The appropriate Customs port director may permit the entry of vessels to be accomplished at locations other than the customhouse, and services may be requested outside of normal business hours. Customs may take local resources into consideration in allowing formal entry to be transacted on board vessels or at other mutually convenient approved sites and times within or outside of port limits. When services are requested to be provided outside the limits of a Customs port, the appropriate port director to whom an application must be submitted is the director of the port located nearest to the point where the proposed services would be provided. That port director must be satisfied that the place designated for formal entry will be sufficiently under Customs control at the time of entry, and that the expenses incurred by Customs will be reimbursed as authorized. It may be required that advance notice of vessel arrival be given as a condition for granting requests for optional entry locations. A master, owner, or agent of a vessel who <PRTPAGE P="12"/>desires that entry be made at an optional location will file with the appropriate port director an application on Customs Form 3171 and a single entry or continuous bond on Customs Form 301 containing the bond conditions set forth in § 113.64 of this chapter, in such amount as that port director deems appropriate but not less than $1,000. If the application is approved, the port director or a designated Customs officer will formally enter the vessel. Nothing in this paragraph relieves any person or vessel from any requirement as to how, when and where they are to report, be inspected or receive clearance from other Federal agencies upon arrival in the United States.</P> <CITA>[T.D. 00-4, 65 FR 2872, Jan. 19, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.3a</SECTNO> <SUBJECT>Penalties for violation of vessel reporting and entry requirements.</SUBJECT> <P>Violation of the arrival or entry reporting requirements provided for in this part may result in the master being liable for certain civil and criminal penalties, as provided under 19 U.S.C. 1436, in addition to other penalties applicable under other provisions of law. The penalties include civil monetary penalties for failure to report arrival or make entry, and any conveyance used in connection with any such violation is subject to seizure and forfeiture. Further, if any merchandise (other than sea stores or the equivalent for conveyances other than a vessel) is involved in the failure to report arrival or entry, additional penalties equal to the value of merchandise may be imposed, and the merchandise may be seized and forfeited unless properly entered by the importer or consignee. The criminal penalties, applicable upon conviction, include fines and imprisonment if the master intentionally commits any violation of these reporting and entry requirements or if prohibited merchandise is involved in the failure to report arrival or make entry.</P> <CITA>[T.D. 93-96, 58 FR 67316, Dec. 21, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.4</SECTNO> <SUBJECT>Panama Canal; report of arrival required.</SUBJECT> <P>Vessels which merely transit the Panama Canal without transacting any business there shall be required to report their arrival because of such transit. The report of arrival shall be made in accordance with § 4.2(a).</P> <CITA>[T.D. 79-276, 44 FR 61956, Oct. 29, 1979]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.5</SECTNO> <SUBJECT>Government vessels.</SUBJECT> <P>(a) No report of arrival or entry shall be required of any vessel owned by, or under the complete control and management of the United States or any of its agencies, if such vessel is manned wholly by members of the uniformed services of the United States, by personnel in the civil service of the United States, or by both, and is transporting only property of the United States or passengers traveling on official business of the United States, or it is ballast. In addition, any vessel chartered by, and transporting only cargo that is the property of, the U.S. Department of Defense (DoD) will be treated as a Government vessel for the purpose of being exempt from entry, where the DoD-chartered vessel is manned entirely by the civilian crew of the vessel carrier under contract to DoD. Notwithstanding § 4.60(b)(3) of this part, such DoD-chartered vessel is not exempt from vessel clearance requirements. However, if any cargo is on board, the master or commander of each such vessel arriving from abroad shall file a Cargo Declaration, Customs Form 1302, or an equivalent form issued by the Department of Defense, in duplicate. The original of each Cargo Declaration or equivalent form required under this paragraph shall be filed with the port director within 48 hours after the arrival of the vessel. The other copy shall be made available for use by the discharging inspector at the pier. See § 148.73 of this chapter with respect to baggage on carriers operated by the Department of Defense.</P> <P>(b) The arrival of every vessel owned or controlled and manned as described in paragraph (a) of this section but transporting other property or passengers, and every vessel so owned or controlled but not so manned, whether in ballast or transporting cargo or passengers, shall be reported in accordance with § 4.2 and the vessel shall be entered in accordance with § 4.9.</P> <P>(c) Every vessel owned by, or under the complete control and management of, any foreign nation shall be exempt from or subject to the laws relating to <PRTPAGE P="13"/>report of arrival and entry under the same conditions as a vessel owned or controlled by the United States.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by 39 FR 10897, Mar. 22, 1974; T.D. 83-213, 48 FR 46978, Oct. 17, 1983; CBP Dec. 03-32, 68 FR 68168, Dec. 5, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.6</SECTNO> <SUBJECT>Departure or unlading before report or entry.</SUBJECT> <P>(a) No vessel which has arrived within the limits of any Customs port from a foreign port or place shall depart or attempt to depart, except from stress of weather or other necessity, without reporting and making entry as required in this part. These requirements shall not apply to vessels merely passing through waters within the limits of a Customs port in the ordinary course of a voyage.</P> <P>(b) The “limits of any Customs port” as used herein are those described in § 101.3(b) of this chapter, including the marginal waters to the 3-mile limit on the seaboard and the waters to the boundary line on the northern and southern boundaries.</P> <P>(c) Violation of this provision may result in the master being liable for certain civil penalties and the vessel to arrest and forfeiture, as provided under 19 U.S.C. 1436, in addition to other penalties applicable under other provisions of law.</P> <CITA>[T.D. 93-96, 58 FR 67316, Dec. 21, 1993, as amended by T.D. 98-74, 63 FR 51287, Sept. 25, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.7</SECTNO> <SUBJECT>Inward foreign manifest; production on demand; contents and form; advance filing of cargo declaration.</SUBJECT> <P>(a) The master of every vessel arriving in the United States and required to make entry shall have on board his vessel a manifest, as required by section 431, Tariff Act of 1930 (19 U.S.C. 1431), and by this section. The manifest shall be legible and complete. If it is in a foreign language, an English translation shall be furnished with the original and with any required copies. The manifest shall consist of a Vessel Entrance or Clearance Statement, Customs Form 1300, and the following documents: (1) Cargo Declaration, Customs Form 1302, (2) Ship's Stores Declaration, Customs Form 1303, (3) Crew's Effects Declaration, Customs Form 1304, or, optionally, a copy of the Crew List, Customs and Immigration Form I-418, to which are attached crewmember's declarations on Customs Form 5129, (4) Crew List, Customs and Immigration Form I-418, and (5) Passenger List, Customs and Immigration Form I-418. Any document which is not required may be omitted from the manifest provided the word “None” is inserted in items 16, 18, and/or 19 of the Vessel Entrance or Clearance Statement, as appropriate. If a vessel arrives in ballast and therefore the Cargo Declaration is omitted, the legend “No merchandise on board” shall be inserted in item 16 of the Vessel Entrance or Clearance Statment.</P> <P>(b)(1) With the exception of any Cargo Declaration that has been filed in advance as prescribed in paragraph (b)(2) of this section, the original and one copy of the manifest must be ready for production on demand. The master shall deliver the original and one copy of the manifest to the Customs officer who shall first demand it. If the vessel is to proceed from the port of arrival to other United States ports with residue foreign cargo or passengers, an additional copy of the manifest shall be available for certification as a traveling manifest (see § 4.85). The port director may require an additional copy or additional copies of the manifest, but a reasonable time shall be allowed for the preparation of any copy which may be required in addition to the original and one copy.</P> <P>(2) Subject to the effective date provided in paragraph (b)(5) of this section, and with the exception of any bulk or authorized break bulk cargo as prescribed in paragraph (b)(4) of this section, Customs and Border Protection (CBP) must receive from the incoming carrier, for any vessel covered under paragraph (a) of this section, the CBP-approved electronic equivalent of the vessel's Cargo Declaration (Customs Form 1302), 24 hours before the cargo is laden aboard the vessel at the foreign port (see § 4.30(n)(1)). The current approved system for presenting electronic cargo declaration information to CBP is the Vessel Automated Manifest System (AMS).</P> <P>(3)(i) Where a non-vessel operating common carrier (NVOCC), as defined in <PRTPAGE P="14"/>paragraph (b)(3)(ii) of this section, delivers cargo to the vessel carrier for lading aboard the vessel at the foreign port, the NVOCC, if licensed by or registered with the Federal Maritime Commission and in possession of an International Carrier Bond containing the provisions of § 113.64 of this chapter, may electronically transmit the corresponding required cargo manifest information directly to Customs through the Vessel Automated Manifest System (AMS) that must be received 24 or more hours before the related cargo is laden aboard the vessel at the foreign port (see § 113.64(c) of this chapter); in the alternative, the NVOCC must fully disclose and present the required manifest information for the related cargo to the vessel carrier which, is required to present this information to Customs via the vessel AMS system.</P> <P>(ii) A non-vessel operating common carrier (NVOCC) means a common carrier that does not operate the vessels by which the ocean transportation is provided, and is a shipper in its relationship with an ocean common carrier. The term “non-vessel operating common carrier” does not include freight forwarders as defined in part 112 of this chapter.</P> <P>(iii) Where the party electronically presenting to CBP the cargo information required in § 4.7a(c)(4) receives any of this information from another party, CBP will take into consideration how, in accordance with ordinary commercial practices, the presenting party acquired such information, and whether and how the presenting party is able to verify this information. Where the presenting party is not reasonably able to verify such information, CBP will permit the party to electronically present the information on the basis of what the party reasonably believes to be true.</P> <P>(4) Carriers of bulk cargo as specified in paragraph (b)(4)(i) of this section and carriers of break bulk cargo to the extent provided in paragraph (b)(4)(ii) of this section are exempt with respect to that cargo from the requirement set forth in paragraph (b)(2) of this section that a cargo declaration be filed with Customs 24 hours before such cargo is laden aboard the vessel at the foreign port. Any carriers of bulk or break bulk cargo that are exempted from the filing requirement of paragraph (b)(2) of this section must present their cargo declarations to Customs 24 hours prior to arrival in the U.S. if they are participants in the vessel AMS program, or upon arrival if they are non-automated carriers. These carriers must still report 24 hours in advance of loading any containerized or non-qualifying break bulk cargo they will be transporting.</P> <P>(i) A carrier is exempt from the filing requirement of paragraph (b)(2) of this section with respect to the bulk cargo it is transporting. Bulk cargo is defined for purposes of this section as homogeneous cargo that is stowed loose in the hold and is not enclosed in any container such as a box, bale, bag, cask, or the like. Such cargo is also described as bulk freight. Specifically, bulk cargo is composed of either:</P> <P>(A) Free flowing articles such as oil, grain, coal, ore, and the like, which can be pumped or run through a chute or handled by dumping; or</P> <P>(B) Articles that require mechanical handling such as bricks, pig iron, lumber, steel beams, and the like.</P> <P>(ii) A carrier of break bulk cargo may apply for an exemption from the filing requirement of paragraph (b)(2) of this section with respect to the break bulk cargo it will be transporting. For purposes of this section, break bulk cargo is cargo that is not containerized, but which is otherwise packaged or bundled.</P> <P>(A) To apply for an exemption, the carrier must submit a written request for exemption to the U.S. Customs Service, National Targeting Center, 1300 Pennsylvania Ave., NW., Washington, DC 20229. Until an application for an exemption is granted, the carrier must comply with the 24 hour advance manifest requirement set out in paragraph (b)(2) of this section. The written request for exemption must clearly set forth information such that Customs may assess whether any security concerns exist, such as: The carrier's IRS number; the source, identity and means of the packaging or bundling of the commodities being shipped; the ports of call, both foreign and domestic; the number of vessels the carrier <PRTPAGE P="15"/>uses to transport break bulk cargo, along with the names of these vessels and their International Maritime Organization numbers; and the list of the carrier's importers and shippers, identifying any who are members of C-TPAT (The Customs-Trade Partnership Against Terrorism).</P> <P>(B) Customs will evaluate each application for an exemption on a case by case basis. If Customs, by written response, provides an exemption to a break bulk carrier, the exemption is only applicable under the circumstances clearly set forth in the application for exemption. If circumstances set forth in the approved application change, it will be necessary to submit a new application.</P> <P>(C) Customs may rescind an exemption granted to a carrier at any time.</P> <P>(5) Within 90 days of December 5, 2003, all ocean carriers, and NVOCCs electing to participate, must be automated on the Vessel AMS system at all ports of entry in the United States.</P> <P>(c) No Passenger List or Crew List shall be required in the case of a vessel arriving from Canada, otherwise than by sea, at a port on the Great Lakes or their connecting or tributary waters.</P> <P>(d)(1) The master or owner of—</P> <P>(i) A vessel documented under the laws of the United States with a registry, coastwise license, or Great Lakes license endorsement, or a vessel not so documented but intended to be employed in the foreign, coastwise, or Great Lakes trade, or</P> <P>(ii) A documented vessel with a fishery license endorsement which has a permit to touch and trade (see § 4.15) or a vessel with a fishery license endorsement lacking a permit to touch and trade but intended to engage in trade—</P> <FP>at the port of first arrival from a foreign country shall declare on Customs Form 226 any equipment, repair parts, or materials purchased for the vessel, or any expense for repairs incurred, outside the United States, within the purview of section 466, Tariff Act of 1930, as amended (19 U.S.C. 1466). If no equipment, repair parts, or materials have been purchased, or repairs made, a declaration to that effect shall be made on Customs Form 226.</FP> <P>(2) If the vessel is at least 500 gross tons, the declaration shall include a statement that no work in the nature of a rebuilding or alteration which might give rise to a reasonable belief that the vessel may have been rebuilt within the meaning of the second proviso to section 27, Merchant Marine Act, 1920, as amended (46 U.S.C. 883), has been effected which has not been either previously reported or separately reported simultaneously with the filing of such declaration. The port director shall notify the U.S. Coast Guard vessel documentation officer at the home port of the vessel of any work in the nature of a rebuilding or alteration, including the construction of any major component of the hull or superstructure of the vessel, which comes to his attention unless the port director is satisfied that the owner of the vessel has filed an application for rebuilt determination as required by 46 CFR 67.27-3.</P> <P>(3) The declaration shall be ready for production on demand for inspection and shall be presented as part of the original manifest when formal entry of the vessel is made.</P> <P>(e) <E T="03">Failure to provide manifest information; penalties/liquidated damages.</E> Any master who fails to provide manifest information as required by this section, or who presents or transmits electronically any document required by this section that is forged, altered or false, or who fails to present or transmit the information required by this section in a timely manner, may be liable for civil penalties as provided under 19 U.S.C. 1436, in addition to penalties applicable under other provisions of law. In addition, if any non-vessel operating common carrier (NVOCC) as defined in paragraph (b)(3)(ii) of this section elects to transmit cargo manifest information to Customs electronically and fails to do so in the manner and in the time period required by paragraph (b)(3)(i) of this section, or electronically transmits any false, forged or altered document, paper, manifest or data to Customs, such NVOCC may be liable for the payment of liquidated damages as provided in § 113.64(c) of this chapter, in addition to any other <PRTPAGE P="16"/>penalties applicable under other provisions of law.</P> <CITA>[T.D. 71-169, 36 FR 12602, July 2, 1971, as amended by T.D. 74-284, 39 FR 39718, Nov. 11, 1974; T.D. 77-255, 42 FR 56319, Oct. 25, 1977; T.D. 80-237, 45 FR 64565, Sept. 30, 1980; T.D. 83-214, 48 FR 46511, Oct. 13, 1983; T.D. 92-74, 57 FR 35751, Aug. 11, 1992; T.D. 00-22, 65 FR 16515, Mar. 29, 2000; T.D. 02-62, 67 FR 66331, Oct. 31, 2002; 68 FR 1801, Jan. 14, 2003; CBP Dec. 03-32, 68 FR 68168, Dec. 5, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.7a</SECTNO> <SUBJECT>Inward manifest; information required; alternative forms.</SUBJECT> <P>The forms designated by § 4.7(a) as comprising the inward manifest shall be completed as follows:</P> <P>(a) <E T="03">Ship's Stores Declaration.</E> Articles to be retained aboard as sea or ship's stores shall be listed on the Ship's Stores Declaration, Customs Form 1303. Less than whole packages of sea or ship's stores may be described as “sundry small and broken stores.”</P> <P>(b) <E T="03">Crew's Effects Declaration. (Customs Form 1304).</E> (1) The declaration number of the Crew Member's Declaration, Customs Form 5129, prepared and signed by any officer or crewmember who intends to land articles in the United States, or the word “None,” shall be shown in item No. 7 on the Crew's Effects Declaration, Customs Form 1304 opposite the respective crewmember's name.</P> <P>(2) In lieu of describing the articles on Customs Form 1304, the master may furnish a Crew List, Customs and Immigration Form I-418, endorsed as follows: </P> <EXTRACT> <P>I certify that this list, with its supporting crewmembers' declarations, is a true and complete manifest of all articles on board the vessel acquired abroad by myself and the officers and crewmembers of this vessel, other than articles exclusively for use on the voyage or which have been duly cleared through Customs in the United States. </P> <HALFDASH/> <FP SOURCE="FRP">(Master.)</FP> </EXTRACT> <FP>The Crew List on Form I-418 shall show, opposite the crewmember's name, his shipping article number and, in column 5, the declaration number. If the crewmember has nothing to declare, the word “None” shall be placed opposite his name instead of a declaration number.</FP> <P>(3) For requirements concerning the preparation of Customs Form 5129, see subpart G of part 148 of this chapter.</P> <P>(4) Any articles which are required to be manifested and are not manifested shall be subject to forfeiture and the master shall be subjected to a penalty equal to the value thereof, as provided in section 584, Tariff Act of 1930, as amended.</P> <P>(c) <E T="03">Cargo Declaration.</E> (1) The Cargo Declaration (Customs Form 1302 or a Customs-approved electronic equivalent) must list all the inward foreign cargo on board the vessel regardless of the U.S. port of discharge, and must separately list any other foreign cargo remaining on board (“FROB”). For the purposes of this part, “FROB” means cargo which is laden in a foreign port, is intended for discharge in a foreign port, and remains aboard a vessel during either direct or indirect stops at one or more intervening United States ports. The block designated “Arrival” at the top of the form shall be checked. The name of the shipper shall be set forth in the column calling for such information and on the same line where the bill of lading is listed for that shipper's merchandise. When more than one bill of lading is listed for merchandise from the same shipper, ditto marks or the word “ditto” may be used to indicate the same shipper. The cargo described in column Nos. 6 and 7, and either column No. 8 <E T="03">or</E> 9, shall refer to the respective bills of lading. Either column No. 8 <E T="03">or</E> column No. 9 shall be used, as appropriate. The gross weight in column No. 8 shall be expressed in either pounds or kilograms. The measurement in column No. 9 shall be expressed according to the unit of measure specified in the Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202).</P> <P>(2)(i) When inward foreign cargo is being shipped by container, each bill of lading shall be listed in the column headed “B/L Nr.” in numerical sequence according to the bill of lading number. The number of the container which contains the cargo covered by that bill of lading and the number of the container seal shall be listed in column No. 6 opposite the bill of lading number. The number of any other bill of lading for cargo in that container <PRTPAGE P="17"/>also shall be listed in column No. 6 immediately under the container and seal numbers. A description of the cargo shall be set forth in column No. 7 only if the covering bill of lading is listed in the column headed “B/L Nr.”</P> <P>(ii) As an alternative to the procedure described in paragraph (i), a separate list of the bills of lading covering each container on the vessel may be submitted on Customs Form 1302 or on a separate sheet. If this procedure is used:</P> <P>(A) Each container number shall be listed in alphanumeric sequence by port of discharge in column No. 6 of Customs Form 1302, or on the separate sheet; and</P> <P>(B) The number of each bill of lading covering cargo in a particular container, identifying the port of lading, shall be listed opposite the number of the container with that cargo in the column headed “B/L Nr.” if Customs Form 1302 is used, or either opposite or under the number of the container if a separate sheet is used.</P> <P>(iii) All bills of lading, whether issued by a carrier, freight forwarder, or other issuer, shall contain a unique identifier consisting of up to 16 characters in length. The unique bill of lading number will be composed of two elements. The first element will be the first four characters consisting of the carrier or issuer's four digit Standard Carrier Alpha Code (SCAC) assigned to the carrier in the National Motor Freight Traffic Association, Inc., Directory of Standard Multi-Modal Carrier and Tariff Agent Codes, applicable supplements thereto and reissues thereof. The second element may be up to 12 characters in length and may be either alpha and/or numeric. The unique identifier shall not be used by the carrier, freight forwarder or issuer for another bill of lading for a period of 3 years after issuance. Customs processing of the unique identifier will be limited to checking the validity of the Standard Carrier Alpha Codes (SCAC) and ensuring that the identifier has not been duplicated within a 3-year period. Carriers and broker/importers will be responsible for reconciliation of discrepancies between manifests and entries. Customs will not perform any reconciliation except in a post-audit process.</P> <P>(3) For shipment of containerized or palletized cargo, Customs officers shall accept a Cargo Declaration which indicates that it has been prepared on the basis of information furnished by the shipper. The use of words of qualification shall not limit the responsibility of a master to submit accurate Cargo Declarations or qualify the oath taken by the master as to the accuracy of his declaration.</P> <P>(i) If Cargo Declaration covers only containerized or palletized cargo, the following statement may be placed on the declaration: </P> <EXTRACT> <P>The information appearing on the declaration relating to the quantity and description of the cargo is in each instance based on the shipper's load and count. I have no knowledge or information which would lead me to believe or to suspect that the information furnished by the shipper is incomplete, inaccurate, or false in any way.</P> </EXTRACT> <P>(ii) If the Cargo Declaration covers conventional cargo and containerized or palletized cargo, or both, the use of the abbreviation “SLAC” for “shipper's load and count,” or an appropriate abbreviation if similar words are used, is approved: <E T="03">Provided,</E> That abbreviation is placed next to each containerized or palletized shipment on the declaration and the following statement is placed on the delaration: </P> <EXTRACT> <P>The information appearing on this declaration relating to the quantity and description of cargo preceded by the abbreviation “SLAC” is in each instance based on the shipper's load and count. I have no information which would lead me to believe or to suspect that the information furnished by the shipper is incomplete, inaccurate, or false in any way.</P> </EXTRACT> <P>(iii) The statements specified in paragraphs (c)(3) (i) and (ii) of this section shall be placed on the last page of the Cargo Declaration. Words similar to “the shipper's load and count” may be substituted for those words in the statements. Vague expressions such as “said to contain” or “accepted as containing” are not acceptable. The use of an asterisk or other character instead of appropriate abbreviations, such as “SLAC”, is not acceptable.</P> <P>(4) In addition to the cargo manifest information required in paragraphs <PRTPAGE P="18"/>(c)(1)-(c)(3) of this section, for all inward foreign cargo, the Cargo Declaration, either on Customs Form 1302, or on a separate sheet or Customs-approved electronic equivalent, must state the following:</P> <P>(i) The last foreign port before the vessel departs for the United States;</P> <P>(ii) The carrier SCAC code (the unique Standard Carrier Alpha Code assigned for each carrier; see paragraph (c)(2)(iii) of this section);</P> <P>(iii) The carrier-assigned voyage number;</P> <P>(iv) The date the vessel is scheduled to arrive at the first U.S. port in Customs territory;</P> <P>(v) The numbers and quantities from the carrier's ocean bills of lading, either master or house, as applicable (this means that the carrier must transmit the quantity of the lowest external packaging unit; containers and pallets are not acceptable manifested quantities; for example, a container containing 10 pallets with 200 cartons should be manifested as 200 cartons);</P> <P>(vi) The first foreign port where the carrier takes possession of the cargo destined to the United States;</P> <P>(vii) A precise description (or the Harmonized Tariff Schedule (HTS) numbers to the 6-digit level under which the cargo is classified if that information is received from the shipper) and weight of the cargo or, for a sealed container, the shipper's declared description and weight of the cargo. Generic descriptions, specifically those such as “FAK” (“freight of all kinds”), “general cargo”, and “STC” (“said to contain”) are not acceptable;</P> <P>(viii) The shipper's complete name and address, or identification number, from all bills of lading. (At the master bill level, for consolidated shipments, the identity of the Non Vessel Operating Common Carrier (NVOCC), freight forwarder, container station or other carrier is sufficient; for non-consolidated shipments, and for each house bill in a consolidated shipment, the identity of the foreign vendor, supplier, manufacturer, or other similar party is acceptable (and the address of the foreign vendor, etc., must be a foreign address); by contrast, the identity of the carrier, NVOCC, freight forwarder or consolidator is not acceptable; the identification number will be a unique number assigned by CBP upon the implementation of the Automated Commercial Environment);</P> <P>(ix) The complete name and address of the consignee, or identification number, from all bills of lading. (For consolidated shipments, at the master bill level, the NVOCC, freight forwarder, container station or other carrier may be listed as the consignee. For non-consolidated shipments, and for each house bill in a consolidated shipment, the consignee is the party to whom the cargo will be delivered in the United States, with the exception of “FROB” (foreign cargo remaining on board). However, in the case of cargo shipped “to order of [a named party],” the carrier must report this named “to order” party as the consignee; and, if there is any other commercial party listed in the bill of lading for delivery or contact purposes, the carrier must also report this other commercial party's identity and contact information (address) in the “Notify Party” field of the advance electronic data transmission to CBP, to the extent that the CBP-approved electronic data interchange system is capable of receiving this data. The identification number will be a unique number assigned by CBP upon implementation of the Automated Commercial Environment);</P> <P>(x) The vessel name, country of documentation, and official vessel number. (The vessel number is the International Maritime Organization number assigned to the vessel);</P> <P>(xi) The foreign port where the cargo is laden on board;</P> <P>(xii) Internationally recognized hazardous material code when such materials are being shipped;</P> <P>(xiii) Container numbers (for containerized shipments);</P> <P>(xiv) The seal numbers for all seals affixed to containers; and</P> <P>(xv) Date of departure from foreign, as reflected in the vessel log (this element relates to the departure of the vessel from the foreign port with respect to which the advance cargo declaration is filed (see § 4.7(b)(2)); the time frame for reporting this data element will be either:</P> <P>(A) No later than 24 hours after departure from the foreign port of lading, <PRTPAGE P="19"/>for those vessels that will arrive in the United States more than 24 hours after sailing from that foreign port; or</P> <P>(B) No later than the presentation of the permit to unlade (Customs Form (CF) 3171, or electronic equivalent), for those vessels that will arrive less than 24 hours after sailing from the foreign port of lading); and</P> <P>(xvi) Time of departure from foreign, as reflected in the vessel log (see § 4.7a(c)(4)(xv) for the applicable foreign port and the time frame within which this data element must be reported to CBP).</P> <P>(d) <E T="03">Crew List.</E> The Crew List shall be completed in accordance with the requirements of the Immigration and Naturalization Service, United States Department of Justice (8 CFR part 251).</P> <P>(e) <E T="03">Passenger List.</E> (1) The Passenger List shall be completed in accordance with § 4.50 and with the requirements of the Immigration and Naturalization Service, U.S. Department of Justice (8 CFR part 231), and the following certification shall be placed on its last page: </P> <EXTRACT> <P>I certify that Customs baggage declaration requirements have been made known to incoming passengers; that any required Customs baggage declarations have been or will simultaneously herewith be filed as required by law and regulation with the proper Customs officer; and that the responsibilities devolving upon this vessel in connection therewith, if any, have been or will be discharged as required by law or regulation before the proper Customs officer. I further certify that there are no steerage passengers on board this vessel (46 U.S.C. 151-163). </P> <HALFDASH/> <FP SOURCE="FRP">Master</FP> </EXTRACT> <P>(2) If the vessel is carrying steerage passengers, the reference to steerage passengers shall be deleted from the certification, and the master shall comply with the requirements of § 4.50.</P> <P>(3) If there are no steerage passengers aboard upon arrival, the listing of the passengers may be in the form of a vessel “souvenir passenger list,” or similar list, in which the names of the passengers are listed alphabetically and to which the certificate referred to in paragraph (e)(1) of this section is attached.</P> <P>(4) All baggage on board a vessel not accompanying a passenger and the marks or addresses thereof shall be listed on the last sheet of the passenger list under the caption “Unaccompanied baggage.”</P> <P>(f) <E T="03">Failure to provide manifest information; penalties/liquidated damages.</E> Any master who fails to provide manifest information as required by this section, or who presents or transmits electronically any document required by this section that is forged, altered or false, may be liable for civil penalties as provided under 19 U.S.C. 1436, in addition to penalties applicable under other provisions of law. In addition, if any non-vessel operating common carrier (NVOCC) as defined in § 4.7(b)(3)(ii) elects to transmit cargo manifest information to Customs electronically, and fails to do so as required by this section, or transmits electronically any document required by this section that is forged, altered or false, such NVOCC may be liable for liquidated damages as provided in § 113.64(c) of this chapter, in addition to other penalties applicable under other provisions of law.</P> <CITA>[T.D. 71-169, 36 FR 12602, July 2, 1971, as amended by T.D. 73-27, 38 FR 2448, Jan. 26, 1973; T.D. 77-255, 42 FR 56320, Oct. 25, 1977; T.D. 79-31, 44 FR 5649, Jan. 29, 1979; T.D. 85-123, 50 FR 29952, July 23, 1985; T.D. 89-58, 54 FR 20381, May 11, 1989; T.D. 93-66, 58 FR 44130, Aug. 19, 1993; T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 98-74, 63 FR 51287, Sept. 25, 1998; T.D. 02-62, 67 FR 66332, Oct. 31, 2002; CBP Dec. 03-32, 68 FR 68169, Dec. 5, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.8</SECTNO> <SUBJECT>Preliminary entry.</SUBJECT> <P>(a) <E T="03">Generally.</E> Preliminary entry allows a U.S. or foreign vessel arriving under circumstances that require it to formally enter, to commence lading and unlading operations prior to making formal entry. Preliminary entry may be accomplished electronically pursuant to an authorized electronic data interchange system, or by any other means of communication approved by the Customs Service.</P> <P>(b) <E T="03">Requirements and conditions.</E> Preliminary entry must be made in compliance with § 4.30, and may be granted prior to, at, or subsequent to arrival of the vessel. The granting of preliminary <PRTPAGE P="20"/>vessel entry by Customs at or subsequent to arrival of the vessel, is conditioned upon the presentation to and acceptance by Customs of all forms, electronically or otherwise, comprising a complete manifest as provided in § 4.7, except that the Cargo Declaration, Customs Form (CF) 1302, must be presented to Customs electronically in the manner provided in § 4.7(b)(2). Vessels seeking preliminary entry in advance of arrival must do so: By presenting to Customs the electronic equivalent of a complete Customs Form 1302 (Cargo Declaration), in the manner provided in § 4.7(b), showing all cargo on board the vessel; and by presenting Customs Form 3171 electronically no less than 48 hours prior to vessel arrival. The CF 3171 will also serve as notice of intended date of arrival. The port director may allow for the presentation of the CF 1302 and CF 3171 less than 48 hours prior to arrival in order to grant advanced preliminary entry if a vessel voyage takes less than 48 hours to complete from the last foreign port to the first U.S. port, or if other reasonable circumstances warrant. Preliminary entry granted in advance of arrival will become effective upon arrival at the port granting preliminary entry. Additionally, Customs must receive confirmation of a vessel's estimated time of arrival in a manner acceptable to the port director.</P> <CITA>[T.D. 00-4, 65 FR 2872, Jan. 19, 2000, as amended by T.D. 02-62, 67 FR 66332, Oct. 31, 2002]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.9</SECTNO> <SUBJECT>Formal entry.</SUBJECT> <P>(a) <E T="03">General.</E> Section 4.3 provides which vessels are subject to formal entry and where and when entry must be made. The formal entry of an American vessel is governed by section 434, Tariff Act of 1930 (19 U.S.C. 1434). The term “American vessel” means a vessel of the United States (see § 4.0(b)) as well as, when arriving by sea, a vessel entitled to be documented except for its size (see § 4.0(c)). The formal entry of a foreign vessel arriving within the limits of any Customs port is also governed by section 434, Tariff Act of 1930 (19 U.S.C. 1434). Alternatively, information necessary for formal entry may be transmitted electronically pursuant to a system authorized by Customs.</P> <P>(b) <E T="03">Procedures for American vessels.</E> Under certain circumstances, American vessels arriving in ports of the United States directly from other United States ports must make entry. Entry of such vessels is required when they have merchandise aboard which is being transported in-bond, or when they have unentered foreign merchandise aboard. For the purposes of the vessel entry requirements, merchandise transported in-bond does not include bonded ship's stores or supplies. While American vessels transporting unentered foreign merchandise must fully comply with the usual formal entry procedures, American vessels carrying no unentered foreign merchandise but which have in-bond merchandise aboard may satisfy vessel entry requirements by making a required report of arrival, and presenting a completed Customs Form 1300 (Vessel Entrance or Clearance Statement). Report of arrival as provided in § 4.2 of this part, together with presenting a completed Customs Form 1300 (Vessel Entrance or Clearance Statement), satisfies all entry requirements for the subject vessels.</P> <P>(c) <E T="03">Delivery of foreign vessel document.</E> The master of any foreign vessel will exhibit the vessel's document to the port director on or before the entry of the vessel. After the net tonnage has been noted, the document may be delivered to the consul of the nation to which such vessel belongs, in which event the vessel master will certify to the port director the fact of such delivery (see section 434, Tariff Act of 1930, as amended (19 U.S.C. 1434), as applied through section 438, Tariff Act of 1930, as amended (19 U.S.C. 1438)). If not delivered to the consul, the document will be deposited in the customhouse. Whether delivered to the foreign consul or deposited at the customhouse, the document will not be delivered to the master of the foreign vessel until clearance is granted under § 4.61. It will not be lawful for any foreign consul to deliver to the master of any foreign vessel the register, or document in lieu thereof, deposited with him in accordance with the provisions of 19 U.S.C. 1434 until such master will produce to him a clearance in due form from the director of the port where such vessel <PRTPAGE P="21"/>has been entered. Any consul violating the provisions of this section is liable to a fine of not more than $5,000 (section 438, Tariff Act of 1930, as amended; 19 U.S.C. 1438).</P> <P>(d) <E T="03">Failure to make required entry; penalties.</E> Any master who fails to make entry as required by this section or who presents or transmits electronically any document required by this section that is forged, altered, or false, may be liable for certain civil penalties as provided under 19 U.S.C. 1436, in addition to penalties applicable under other provisions of law. Further, any vessel used in connection with any such violation is subject to seizure and forfeiture.</P> <CITA>[T.D. 00-4, 65 FR 2873, Jan. 19, 2000; T.D. 00-22, 65 FR 16515, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.10</SECTNO> <SUBJECT>Request for overtime services.</SUBJECT> <P>Request for overtime services in connection with entry or clearance of a vessel, including the boarding of a vessel in accordance with § 4.1 shall be made on Customs Form 3171. (See § 24.16 of this chapter regarding pleasure vessels.) Such request for overtime services must specify the nature of the services desired and the exact times when they will be needed, unless a term special license (unlimited or limited to the service requested) has been issued (see § 4.30(g)) and arrangements are made locally so that the proper Customs officer will be notified during official hours in advance of the rendering of the services as to the nature of the services desired and the exact times they will be needed. Such request shall not be approved (previously issued term special licenses shall be revoked) unless the carrier complies with the provisions of paragraphs (l) and (m) of § 4.30 regarding terminal facilities and employee lists, respectively, and the required cash deposit or bond, on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter, has been received. Separate bonds shall be required if overtime services are requested by different principals.</P> <CITA>[T.D. 72-189, 37 FR 13975, July 15, 1972, as amended by T.D. 84-213, 49 FR 41163, Oct. 19, 1984; T.D. 92-74, 57 FR 35751, Aug. 11, 1992]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.11</SECTNO> <SUBJECT>Sealing of stores.</SUBJECT> <P>Upon the arrival of a vessel from a foreign port, or a vessel engaged in the foreign trade from a domestic port, sea stores and ship's stores not required for immediate use or consumption on board while the vessel is in port and articles acquired abroad by officers and members of the crew, for which no permit to land has been issued, shall be placed under seal, unless the Customs officer is of the opinion that the circumstances do not require such action. Customs inspectors in charge of the vessel, from time to time, as in their judgment the necessity of the case requires, may issue stores from under seal for consumption on board the vessel by its passengers and crew. (See § 4.39.)</P> </SECTION> <SECTION> <SECTNO>§ 4.12</SECTNO> <SUBJECT>Explanation of manifest discrepancy.</SUBJECT> <P>(a)(1) Vessel masters or agents shall notify the port director on Customs Form 5931 of shortages (merchandise manifested, but not found) or overages (merchandise found, but not manifested) of merchandise.</P> <P>(2) Shortages shall be reported to the port direct by the master or agent of the vessel by endorsement on the importer's claim for shortage on Customs Form 5931 as provided for in § 158.3 of this chapter, or within 60 days after the date of entry of the vessel, whichever is later. Satisfactory evidence to support the claim of nonimportation or of proper disposition or other corrective action (see § 4.34) shall be obtained by the master or agent and shall be retained in the carrier's file for one year.</P> <P>(3) Overages shall be reported to the port director within 60 days after the date of entry of the vessel by completion of a post entry or suitable explanation of corrective action (see § 4.34) on the Customs Form 5931.</P> <P>(4) The port director shall immediately advise the master or agent of those discrepancies which are not reported by the master or agent. Notification may be in any appropriate manner, including the furnishing of a copy of Customs Form 5931 to the master or agent. The master or agent shall satisfactorily resolve the matter within 30 <PRTPAGE P="22"/>days after the date of such notification, or within 60 days after entry of the vessel, whichever is later.</P> <P>(5)(a) Unless the required notification and explanation is made timely and the port director is satisfied that the discrepancies resulted from clerical error or other mistake and that there has been no loss of revenue (and in the case of a discrepancy not initially reported by the master or agent that there was a valid reason for failing to so report), applicable penalties under section 584, Tariff Act of 1930, as amended (19 U.S.C. 1584), shall be assessed (see § 162.31 of this chapter). For purposes of this section, the term “clerical error” is defined as a non-negligent, inadvertent, or typographical mistake in the preparation, assembly, or submission (electronically or otherwise) of the manifest. However, repeated similar manifest discrepancies by the same parties may be deemed the result of negligence and not clerical error or other mistake. For the purpose of assessing applicable penalties, the value of the merchandise shall be determined as prescribed in § 162.43 of this chapter. The fact that the master or owner had no knowledge of a discrepancy shall not relieve him from the penalty.</P> <P>(b) Except as provided in paragraph (c) of this section, a correction in the manifest shall not be required in the case of bulk merchandise if the port director is satisfied that the difference between the manifested quantity and the quantity unladen, whether the difference constitutes an overage or a shortage, is an ordinary and usual difference properly attributable to absorption of moisture, temperature, faulty weighing at the port of lading, or other similar reason. A correction in the manifest shall not be required because of discrepancies between marks or numbers on packages of merchandise and the marks or numbers for the same packages as shown on the manifest of the importing vessel when the quantity and description of the merchandise in such packages are correctly given.</P> <P>(c) Manifest discrepancies (shortages and overages) of petroleum and petroleum products imported in bulk shall be reported on Customs Form 5931, if the discrepancy exceeds one percent.</P> <CITA>[T.D. 80-142, 45 FR 36383, May 30, 1980, as amended by T.D. 99-64, 64 FR 43265, Aug. 10, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.13</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 4.14</SECTNO> <SUBJECT>Equipment purchases by, and repairs to, American vessels.</SUBJECT> <P>(a) <E T="03">General provisions and applicability.</E> Under section 466, Tariff Act of 1930, as amended (19 U.S.C. 1466), purchases for or repairs made to certain vessels while they are outside the United States, including repairs made while those vessels are on the high seas, are subject to declaration, entry and payment of ad valorem duty. This does not apply to reimbursement paid to members of the regular crew of a vessel for labor expended in making repairs to the vessel. These requirements are effective upon the first arrival of affected vessels in the United States or Puerto Rico. The vessels subject to these requirements include those documented under U.S. law for the foreign or coastwise trades, as well as those which were previously documented under the laws of some foreign nation or are undocumented at the time that foreign shipyard repairs are performed, but which exhibit an intent to engage in those trades under Customs interpretations. Duty is based on actual foreign cost. This includes the original foreign purchase price of articles which have been imported into the United States and are later sent abroad for use. For the purposes of this section, expenditures made in American Samoa, the Guantanamo Bay Naval Station, Guam, Puerto Rico, or the U.S. Virgin Islands are considered to have been made in the United States, and are not subject to declaration, entry or duty. Under separate provisions of law, the cost of labor performed, and of parts and materials produced and purchased in Israel are not subject to duty under the vessel repair statute. Additionally, expenditures made in Canada or in Mexico are not subject to any vessel repair duties. Even in the absence of any liability for duty, it is still required that all repairs and purchases, including those made in Canada, Mexico, and Israel, be declared and entered.<PRTPAGE P="23"/> </P> <P>(b) <E T="03">Applicability to specific types of vessels.</E> (1) <E T="03">Fishing vessels.</E> As provided in § 4.15, vessels documented under U.S. law with a fishery endorsement are subject to vessel repair duties for covered foreign expenditures. Undocumented American fishing vessels which are repaired, or for which parts, nets or equipment are purchased outside the U.S. are also liable for duty.</P> <P>(2) <E T="03">Government-owned or chartered vessels.</E> Vessels normally subject to the vessel repair statute because of documentation or intended use are not excused from duty liability merely because they are either owned or chartered by the U.S. Government.</P> <P>(3) <E T="03">Vessels continuously away for two years or longer.</E> (i) <E T="03">Liability for expenditures throughout entire absence from U.S.</E> Vessels that continuously remain outside the United States for two years or longer are liable for duty on any fish nets and netting purchased at any time during the entire absence. Vessels designed and used primarily for transporting passengers or merchandise, which depart the United States for the sole purpose of obtaining equipment, parts, materials or repairs remain fully liable for duty regardless of the duration of their absence from the United States.</P> <P>(ii) <E T="03">Liability for expenditures made during first six months of absence.</E> Except as provided in paragraph (b)(3)(i) of this section, vessels that continuously remain outside the United States for two years or longer are liable for duty only on those expenditures which are made during the first six months of their absence. See paragraph (h)(3) of this section. However, even though some costs might not be dutiable because of the six-month rule, all repairs, materials, parts and equipment-related expenditures must be declared and entered.</P> <P>(c) <E T="03">Estimated duty deposit and bond requirements.</E> Generally, the person authorized to submit a vessel repair declaration and entry must either deposit or transmit estimated duties or produce evidence of a bond on Customs Form 301 at the first United States port of arrival before the vessel will be permitted to depart from that port. A continuous or single entry bond of sufficient value to cover all potential duty on the foreign repairs and purchases must be identified by surety, number and amount on the vessel repair declaration which is submitted at the port of first arrival. At the time the vessel repair entry is submitted by the vessel operator to the appropriate VRU port of entry as defined in paragraph (g) of this section, that same identifying information must be identified on the entry form. Sufficiency of the amount of the bond is within the discretion of Customs at the arrival port with claims for reduction in duty liability necessarily being subject to full consideration of evidence by Customs. Customs officials at the port of arrival may consult the appropriate Vessel Repair Unit (VRU) port of entry as identified in paragraph (g) of this section or the staff of the Entry Procedures and Carriers Branch in Customs Headquarters in setting sufficient bond amounts. These duty, deposit, and bond requirements do not apply to vessels which are owned or chartered by the United States Government and are actually being operated by employees of an agency of the Government. If operated by a private party for a Federal agency under terms whereby that private party is liable under the contract for payment of the duty, there must be a deposit or a bond filed in an amount adequate to cover the estimated duty.</P> <P>(d) <E T="03">Declaration required.</E> When a vessel subject to this section first arrives in the United States following a foreign voyage, the owner, master, or authorized agent must submit a vessel repair declaration on Customs Form 226, a dual-use form used both for declaration and entry purposes, or must transmit its electronic equivalent. The declaration must be ready for presentation in the event that a Customs officer boards the vessel. If no foreign repair-related expenses were incurred, that fact must be reported either on the declaration form or by approved electronic means. The Customs port of arrival receiving either a positive or negative vessel repair declaration or electronic equivalent will immediately forward it to the appropriate VRU port of entry as identified in paragraph (g) of this section.</P> <P>(e) <E T="03">Entry required.</E> The owner, master, or authorized representative of the owner of any vessel subject to this section for which a positive declaration <PRTPAGE P="24"/>has been filed must submit a vessel repair entry on Customs Form 226 or transmit its electronic equivalent. The entry must show all foreign voyage expenditures for equipment, parts of equipment, repair parts, materials and labor. The entry submission must indicate whether it provides a complete or incomplete account of covered expenditures. The entry must be presented or electronically transmitted by the vessel operator to the appropriate VRU port of entry as identified in paragraph (g) of this section, so that it is received within ten calendar days after arrival of the vessel. Claims for relief from duty should be made generally as part of the initial submission, and evidence must later be provided to support those claims. Failure to submit full supporting evidence of cost within stated time limits, including any extensions granted under this section, is considered to be a failure to enter.</P> <P>(f) <E T="03">Time limit for submitting evidence of cost.</E> A complete vessel repair entry must be supported by evidence showing the cost of each item entered. If the entry is incomplete when submitted, evidence to make it complete must be received by the appropriate VRU port of entry as identified in paragraph (g) of this section within 90 calendar days from the date of vessel arrival. That evidence must include either the final cost of repairs or, if the operator submits acceptable evidence that final cost information is not yet available, initial or interim cost estimates given prior to or after the work was authorized by the operator. The proper VRU port of entry may grant one 30-day extension of time to submit final cost evidence if a satisfactory written explanation of the need for an extension is received before the expiration of the original 90-day submission period. All extensions will be issued in writing. Inadequate, vague, or open-ended requests will not be granted. Questions as to whether an extension should be granted may be referred to the Entry Procedures and Carriers Branch in Customs Headquarters by the VRU ports of entry. Any request for an extension beyond a 30-day grant issued by a VRU must be submitted through that unit to the Entry Procedures and Carriers Branch, Customs Headquarters. In the event that all cost evidence is not furnished within the specified time limit, or is of doubtful authenticity, the VRU may refer the matter to the Customs Office of Investigations to begin procedures to obtain the needed evidence. That office may also investigate the reason for a failure to file or for an untimely submission. Unexplained or unjustified delays in providing Customs with sufficient information to properly determine duty may result in penalty action as specified in paragraph (j) of this section. Extensions granted for the filing of necessary evidence may also extend the time for filing Applications for Relief (see paragraph (i)(1) of this section).</P> <P>(g) <E T="03">Location and jurisdiction of vessel repair unit ports of entry.</E> Vessel Repair Units (VRUs) are responsible for processing vessel repair entries. VRUs are located in New York, New York; New Orleans, Louisiana; and San Francisco, California. The New York unit processes vessel repair entries received from ports of arrival on the Great Lakes and the Atlantic Coast of the United States north of, but not including, those located in the State of Virginia. The New Orleans unit processes vessel repair entries received from ports of arrival on the Atlantic Coast from and including those in the State of Virginia, southward, and from all United States ports of arrival on the Gulf of Mexico including ports in Puerto Rico. The San Francisco unit processes vessel repair entries received from all ports of entry on the Pacific Coast including those in Alaska and Hawaii.</P> <P>(h) <E T="03">Justifications for relief from duty.</E> Claims for relief from the assessment of vessel repair duties may be submitted to Customs. Relief may be sought under paragraphs (a), (d), (e), or (h) of the vessel repair statute (19 U.S.C. 1466(a), (d), (e), or (h)), each paragraph of which relates to a different type of claim as further specified in paragraphs (h)(1)-(h)(4) of this section.</P> <P>(1) <E T="03">Relief under 19 U.S.C. 1466(a).</E> Requests for relief from duty under 19 U.S.C. 1466(a) consist of claims that a foreign shipyard operation or expenditure is not considered to be a repair or purchase within the terms of the vessel <PRTPAGE P="25"/>repair statute or as determined under judicial or administrative interpretations. Example: a claim that the shipyard operation is a vessel modification.</P> <P>(2) <E T="03">Relief from duty under 19 U.S.C. 1466(d).</E> Requests for relief from duty under 19 U.S.C. 1466(d) consist of claims that a foreign shipyard operation or expenditure involves any of the following:</P> <P>(i) <E T="03">Stress of weather or other casualty.</E> Relief will be granted if good and sufficient evidence supports a finding that the vessel, while in the regular course of its voyage, was forced by stress of weather or other casualty, while outside the United States, to purchase such equipment or make those repairs as are necessary to secure the safety and seaworthiness of the vessel in order to enable it to reach its port of destination in the United States. For the purposes of this paragraph, a “casualty” does not include any purchase or repair made necessary by ordinary wear and tear, but does include the failure of a part to function if it is proven that the specific part was repaired, serviced, or replaced in the United States immediately before the start of the voyage in question, and then failed within six months of that date.</P> <P>(ii) <E T="03">U.S. parts installed by regular crew or residents.</E> Relief will be granted if equipment, parts of equipment, repair parts, or materials used on a vessel were manufactured or produced in the United States and were purchased in the United States by the owner of the vessel. It is required under the statute that residents of the United States or members of the regular crew of the vessel perform any necessary labor in connection with such installations.</P> <P>(iii) <E T="03">Dunnage.</E> Relief will be granted if any equipment, equipment parts, materials, or labor were used for the purpose of providing dunnage for the packing or shoring of cargo, for erecting temporary bulkheads or other similar devices for the control of bulk cargo, or for temporarily preparing tanks for carrying liquid cargoes.</P> <P>(3) <E T="03">Relief under 19 U.S.C. 1466(e).</E> Requests for relief from duty under 19 U.S.C. 1466(e) relate in pertinent part to matters involving vessels normally subject to the vessel repair statute, but that continuously remain outside the United States for two years or longer. Vessels that continuously remain outside the United States for two years or longer may qualify for relief from duty on expenditures made later than the first six months of their absence. See paragraph (b)(3)(ii) of this section.</P> <P>(4) <E T="03">Relief under 19 U.S.C. 1466(h).</E> Requests for relief from duty under 19 U.S.C. 1466(h) consist of claims that a foreign shipyard operation or expenditure involves any of the following:</P> <P>(i) <E T="03">Expenditures on LASH barges.</E> Relief will be granted with respect to the cost of equipment, parts, materials, or repair labor for Lighter Aboard Ship (LASH) operations accomplished abroad.</P> <P>(ii) <E T="03">Certain spare repair parts or materials.</E> Relief will be granted with respect to the cost of spare repair parts or materials which are certified by the vessel owner or master to be for use on a cargo vessel, but only if duty was previously paid under the appropriate commodity classification(s) as found in the Harmonized Tariff Schedule of the United States when the article first entered the United States.</P> <P>(iii) <E T="03">Certain spare parts necessarily installed on a vessel prior to their first entry into the United States.</E> Relief will be granted with respect to the cost of spare parts only, which have been necessarily installed prior to their first entry into the United States with duty payment under the appropriate commodity classification(s) as found in the Harmonized Tariff Schedule of the United States.</P> <P>(i) <E T="03">General procedures for seeking relief.</E> (1) <E T="03">Applications for Relief.</E> Relief from the assessment of vessel repair duty will not be granted unless an Application for Relief is filed with Customs. Relief will not be granted based merely upon a claim for relief made at the time of entry under paragraph (e) of this section. The filing of an Application for Relief is not required, nor is one required to be presented in any particular format, but if filed it must clearly present the legal basis for granting relief, as specified in paragraph (h) of this section. An Application must also state that all repair operations performed aboard a vessel during the one-year period prior to the <PRTPAGE P="26"/>current submission have been declared and entered. A valid Application is required to be supported by complete evidence as detailed in paragraphs (i)(1)(i)-(vi) and (i)(2) of this section. Except as further provided in this paragraph, the deadline for receipt of an Application and supporting evidence is 90 calendar days from the date that the vessel first arrived in the United States following foreign operations. The provisions for extension of the period for filing required evidence in support of an entry, as set forth in paragraph (f) of this section, are applicable to extension of the time period for filing Applications for Relief as well. Applications must be addressed and submitted by the vessel operator to the appropriate VRU port of entry and will be decided in that unit. The VRUs may seek the advice of the Entry Procedures and Carriers Branch in Customs Headquarters with regard to any specific item or issue which has not been addressed by clear precedent. If no Application is filed or if a submission which does not meet the minimal standards of an Application for Relief is received, the duty amount will be determined without regard to any potential claims for relief from duty (see paragraph (h) of this section). Each Application for Relief must include copies of:</P> <P>(i) Itemized bills, receipts, and invoices for items shown in paragraph (e) of this section. The cost of items for which a request for relief is made must be segregated from the cost of the other items listed in the vessel repair entry;</P> <P>(ii) Photocopies of relevant parts of vessel logs, as well as of any classification society reports which detail damage and remedies;</P> <P>(iii) A certification by the senior officer with personal knowledge of all relevant circumstances relating to casualty damage (time, place, cause, and nature of damage);</P> <P>(iv) A certification by the senior officer with personal knowledge of all relevant circumstances relating to foreign repair expenditures (time, place, and nature of purchases and work performed);</P> <P>(v) A certification by the master that casualty-related expenditures were necessary to ensure the safety and seaworthiness of the vessel in reaching its United States port of destination; and</P> <P>(vi) Any permits or other documents filed with or issued by any United States Government agency other than Customs regarding the operation of the vessel that are relevant to the request for relief.</P> <P>(2) <E T="03">Additional evidence.</E> In addition, copies of any other evidence and documents the applicant may wish to provide as evidentiary support may be submitted. Elements of applications which are not supported by required evidentiary elements will be considered fully dutiable. All documents submitted must be certified by the master, owner, or authorized corporate officer to be originals or copies of originals, and if in a foreign language, they must be accompanied by an English translation, certified by the translator to be accurate. Upon receipt of an Application for Relief by the VRU within the prescribed time limits, a determination of duties owed will be made. After a decision is made on an Application for Relief by a VRU, the applicant will be notified of the right to protest any adverse decision.</P> <P>(3) <E T="03">Administrative protest.</E> Following the determination of duty owing on a vessel repair entry, a protest may be filed under 19 U.S.C. 1514(a)(2) as the only and final administrative appeal. The procedures and time limits applicable to protests filed in connection with vessel repair entries are the same as those provided in part 174 of this chapter. In particular, the applicable protest period will begin on the date of the issuance of the decision giving rise to the protest as reflected on the relevant correspondence from the appropriate VRU.</P> <P>(j) <E T="03">Penalties</E>—(1) <E T="03">Failure to report, enter, or pay duty.</E> It is a violation of the vessel repair statute if the owner or master of a vessel subject to this section willfully or knowingly neglects or fails to report, make entry, and pay duties as required; makes any false statements regarding purchases or repairs described in this section without reasonable cause to believe the truth of the statements; or aids or procures any false statements regarding any material matter without reasonable cause to believe the truth of the statement. <PRTPAGE P="27"/>If a violation occurs, the vessel, its tackle, apparel, and furniture, or a monetary amount up to their value as determined by Customs, is subject to seizure and forfeiture and is recoverable from the owner (see § 162.72 of this chapter).</P> <P>(2) <E T="03">False declaration.</E> If any person required to file a vessel repair declaration or entry under this section, knowingly and willfully falsifies, conceals or covers up by any trick, scheme, or device a material fact, or makes any materially false, fictitious or fraudulent statement or representation, or makes or uses any false writing or document knowing the same to contain any materially false, fictitious or fraudulent statement, that person will be subject to the criminal penalties provided for in 18 U.S.C. 1001.</P> <CITA>[66 FR 16397, Mar. 26, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.15</SECTNO> <SUBJECT>Fishing vessels touching and trading at foreign places.</SUBJECT> <P>(a) Before any vessel documented with a fishery license endorsement shall touch and trade at a foreign port or place, the master shall obtain from the port director a permit on Customs Form 1379 to touch and trade.</P> <FP>When a fishing vessel departs from the United States and there is an intent to stop at a foreign port (1) to lade vessel equipment which was preordered, (2) to purchase and lade vessel equipment, or (3) to purchase and lade vessel equipment to replace existing vessel equipment, the master of the vessel must either clear for that foreign port or obtain a permit to touch and trade, whether or not the vessel will engage in fishing on that voyage. <SU>28</SU> <FTREF/> Purchases of such equipment, whether intended at the time of departure or not, are subject to declaration, entry, and payment of duty pursuant to section 466 of the Tariff Act of 1930, as amended (19 U.S.C. 1466). The duty may be remitted if it is established that the purchases resulted from stress of weather or other casualty.</FP> <FTNT> <P> <SU>28</SU> If such a vessel puts into a foreign port or place and only obtains bunkers, stores, or supplies suitable for a fishing voyage, it is not considered to have touched and traded there. Fish nets and netting are considered vessel equipment and not vessel supplies.</P> <P> <E T="51">29-61</E> [Reserved]</P> </FTNT> <P>(b) Upon the arrival of a documented vessel with a fishery endorsement which has put into a foreign port or place, the master shall report its arrival, make entry, and conform in all respects to the regulations applicable in the case of a vessel arriving from a foreign port.</P> <P>(c) If a vessel which has been granted a permit to touch and trade arrives at a port in the United States, whether or not the vessel has touched at a foreign port or place, such permit shall forthwith be surrendered to the port director.</P> <P>(d) No permit to touch and trade shall be issued to a vessel which does not have a Certificate of Documentation with a fishery license endorsement.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 77-28, 42 FR 3161, Jan. 17, 1977; T.D. 83-214, 48 FR 46512, Oct. 13, 1983; T.D. 94-24, 59 FR 13200, Mar. 21, 1994; T.D. 95-77, 60 FR 50010, Sept. 27, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.16</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 4.17</SECTNO> <SUBJECT>Vessels from discriminating countries.</SUBJECT> <P>The prohibition against imports in, and the penalty of forfeiture of, certain vessels from countries which discriminate against American vessels provided for in subsections 2 and 3 of paragraph J, section IV, Tariff Act of 1913, as amended by the act of March 4, 1915 (19 U.S.C. 130, 131), shall be enforced only in pursuance of specific instructions issued and published from time to time by the Secretary of the Treasury or such other officer as the Secretary may designate. (See also §§ 4.20(c) and 159.42 of this chapter.)</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 73-175, 38 FR 17444, July 2, 1973]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Tonnage Tax and Light Money</HD> <SECTION> <SECTNO>§ 4.20</SECTNO> <SUBJECT>Tonnage taxes.</SUBJECT> <P>(a) Except as specified in § 4.21, a regular tonnage tax or duty of 2 cents per net ton, not to exceed in the aggregate 10 cents per net ton in any 1 year, shall be imposed at each entry on all vessels which shall be entered in any port of the United States from any foreign <PRTPAGE P="28"/>port or place in North America, Central America, the West Indies, the Bahama Islands, the Bermuda Islands, the coast of South America bordering on the Caribbean Sea (considered to include the mouth of the Orinoco River), or the high seas adjacent to the U.S. or the above listed foreign locations, and on all vessels (except vessels of the U.S., recreational vessels, and barges, as defined in § 2101 of Title 46) that depart a U.S. port or place and return to the same port or place without being entered in the United States from another port or place, and regular tonnage tax of 6 cents per net ton, not to exceed 30 cents per net ton per annum, shall be imposed at each entry on all vessels which shall be entered in any port of the United States from any other foreign port. In determining the port of origin of a voyage to the United States and the rate of tonnage tax, the following shall be used as a guide:</P> <P>(1) When the vessel has proceeded in ballast from a port to which the 6-cent rate is applicable to a port to which the 2-cent rate applies and there has laden cargo or taken passengers, tonnage tax upon entry in the United States shall be assessed at the 2-cent rate.</P> <P>(2) The same rate shall be applied in a case in which the vessel has transported cargo or passengers from a 6-cent port to a 2-cent port when all such cargo or passengers have been unladen or discharged at the 2-cent port, without regard to whether the vessel thereafter has proceeded to the United States in ballast or with cargo or passengers laden or taken on board at the 2-cent port.</P> <P>(3) The 6-cent rate shall be applied when the vessel proceeds from a 2-cent port to a 6-cent port en route to the United States under circumstances similar to paragraph (a) (1) or (2) of this section.</P> <P>(4) If the vessel arrives in the United States with cargo or passengers taken at two or more ports to which different rates are applicable, tonnage tax shall be collected at the higher rate.</P> <P>(b) The tonnage year shall be computed from the date of the first entry of the vessel concerned, without regard to the rate of the payment made at that entry, and shall expire on the day preceding the corresponding date of the following year. There may be 5 payments at the maximum (6 cent) and 5 at the minimum (2-cent) rate during a tonnage year, so that the maximum assessment of tonnage duty may amount to 40 cent per net ton for the tonnage year of a vessel engaged in alternating trade.</P> <P>(c) A vessel shall also be subject on every entry from a foreign port or place, whether or not regular tonnage tax is payable on the particular entry, to the payment of a special tonnage tax and to the payment of light money at the rates and under the circumstances specified in the following table:</P> <GPOTABLE CDEF="s185,12,9,9" COLS="4" OPTS="L2"> <BOXHD> <CHED H="1">Classes of vessels</CHED> <CHED H="1">Rate per net ton</CHED> <CHED H="2">Regular tax</CHED> <CHED H="2">Special tax</CHED> <CHED H="2">Light money</CHED> </BOXHD> <ROW> <ENT I="11">Vessels of the United States:</ENT> </ROW> <ROW> <ENT I="02">1. Under provisional register, without regard to citizenship of officers</ENT> <ENT>$.02 or $.06</ENT> <ENT/> <ENT/> </ROW> <ROW> <ENT I="12">2. All others:</ENT> </ROW> <ROW> <ENT I="03">(i) If all the officers are citizens</ENT> <ENT>.02 or .06</ENT> <ENT/> <ENT/> </ROW> <ROW> <ENT I="03">(ii) If any officer is not a citizen</ENT> <ENT>.02 or .06</ENT> <ENT> <SU>1</SU> 0.50</ENT> <ENT> <SU>1</SU> .50</ENT> </ROW> <ROW> <ENT I="01">Undocumented vessels which are owned by citizens <SU>2</SU> </ENT> <ENT>.02 or .06</ENT> <ENT>.50</ENT> <ENT> <SU>3</SU> .50</ENT> </ROW> <ROW> <ENT I="11">Foreign vessels:</ENT> </ROW> <ROW> <ENT I="02">1. Of nations whose vessels are exempted from special tax or light money</ENT> <ENT>.02 or .06</ENT> <ENT/> <ENT/> </ROW> <ROW> <ENT I="12">2. All others:</ENT> </ROW> <ROW> <ENT I="03">(i) Built in the U.S</ENT> <ENT>.02 or .06</ENT> <ENT>.30</ENT> <ENT>.50</ENT> </ROW> <ROW> <ENT I="03">(ii) Not built in the U.S</ENT> <ENT>.02 or .06</ENT> <ENT>.50</ENT> <ENT>.50</ENT> </ROW> <ROW> <ENT I="03">(iii) In addition to (i) or (ii) of 2., Foreign Vessels, when entering from a foreign port or place where vessels of the U.S. are not ordinarily permitted to enter and trade <SU>3a</SU> </ENT> <ENT>.02 or .06</ENT> <ENT> <SU>4</SU> 2.00</ENT> <ENT> <SU>4</SU> .50</ENT> </ROW> <TNOTE> <SU>1</SU> This does not apply on the first arrival of a vessel in a port of the United States from a foreign or intercoastal voyage if all the officers who are not citizens are below the grade of master and are filling vacancies which occurred on the voyage.</TNOTE> <TNOTE> <SU>2</SU> This special tax and light money do not apply if the vessel is documented as a vessel of the United States before leaving the port.<PRTPAGE P="29"/> </TNOTE> <TNOTE> <SU>3</SU> This does not apply if the vessel is under a certificate of protection and the owner or master files with the port director the oath required by 46 U.S.C. App. 129. An unrecorded bill of sale is not such a document as will exempt a vessel from the payment of light money under 46 U.S.C. App. 128, and the recording of such bill of sale after the arrival of the vessel is not sufficient to relieve it from the payment of the tax.</TNOTE> <TNOTE> <SU>3a</SU> The Democratic People's Republic of Korea (North Korea), does not ordinarily permit vessels of the United States to enter and trade.</TNOTE> <TNOTE> <SU>4</SU> This is to be collected on each entry of a vessel from such a port or place.</TNOTE> </GPOTABLE> <P>(d) Tonnage tax shall be imposed upon a vessel even though she enters a port of the United States only for orders.</P> <P>(e) The fact that a vessel passes through the Panama Canal does not affect the rate of tonnage tax otherwise applicable to the vessel.</P> <P>(f) For the purpose of computing tonnage tax, the net tonnage of a vessel stated in the vessel's marine document shall be accepted unless (1) such statement is manifestly wrong, in which case the net tonnage shall be estimated, pending admeasurement of the vessel, or the tonnage reported for her by any recognized classification society may be accepted, or (2) an appendix is attached to the marine document showing a net tonnage ascertained under the so-called “British rules” or the rules of any foreign country which have been accepted as substantially in accord with the rules of the United States, in which case the tonnage so shown may be accepted and the date the appendix was issued shall be noted on the tonnage tax certificate, Customs Form 1002, and on the Vessel Entrance or Clearance Statement, Customs Form 1300. For the purpose of computing tonnage tax on a vessel with a tonnage mark and dual tonnages, the higher of the net tonnages stated in the vessel's marine document or tonnage certificate shall be used unless the Customs officer concerned is satisfied by report of the boarding officer, statement or certificate of the master, or otherwise that the tonnage mark was not submerged at the time of arrival. Whether the vessel has a tonnage mark, and if so, whether the mark was submerged on arrival, shall be noted on Customs Form 1300 by the boarding officer.</P> <P>(g) The decision of the Commissioner of Customs is the final administrative decision on any question of interpretation relating to the collection of tonnage tax or to the refund of such tax when collected erroneously or illegally, and any question of doubt shall be referred to him for instructions.</P> <P>(h) Any person adversely affected by a decision of the Commissioner of Customs relating to the collection of tonnage tax, or to the refund of such tax when collected erroneously or illegally, may appeal the decision in the Court of International Trade provided that the appeal action is commenced in accordance with the rules of the Court within 2 years after the cause of action first accrues.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 71-169, 36 FR 12603, July 2, 1971; T.D. 75-110, 40 FR 21027, May 15, 1975; T.D. 76-280, 41 FR 42647, Sept. 28, 1976; T.D. 79-276, 44 FR 61956, Oct. 29, 1979; T.D. 82-145, 47 FR 35475, Aug. 16, 1982; T.D. 85-91, 50 FR 21429, May 24, 1985; T.D. 85-90, 50 FR 21430, May 24, 1985; T.D. 93-12, 58 FR 13196, Mar. 10, 1993; T.D. 95-76, 60 FR 48028, Sept. 18, 1995; T.D. 97-82, 62 FR 51769, Oct. 3, 1997; T.D. 00-22, 65 FR 16515, Mar. 29, 2000; CBP Dec. 03-16, 68 FR 48280, Aug. 13, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.21</SECTNO> <SUBJECT>Exemptions from tonnage taxes.</SUBJECT> <P>(a) Tonnage taxes and light money shall be suspended in whole or in part whenever the President by proclamation shall so direct.</P> <P>(b) The following vessels, or vessels arriving in the circumstances as defined below, shall be exempt from tonnage tax and light money:</P> <P>(1) It comes into port for bunkers (including water), sea stores, or ship's stores; transacts no other business in the port; and departs within 24 hours after its arrival.</P> <P>(2) It arrives in distress, even though required to enter.</P> <P>(3) It is brought into port by orders of United States naval authorities and transacts no business while in port other than the taking on of bunkers, sea stores, or ship's stores.</P> <P>(4) It is a vessel of war or other vessel which is owned by, or under the complete control and management of the United States or the government of a foreign country, and which is not carrying passengers or merchandise in <PRTPAGE P="30"/>trade or, if in ballast, which is not arriving from a foreign port during the usual course of its employment as a vessel engaged in trade.</P> <P>(5) It is a yacht or other pleasure vessel not carrying passengers or merchandise in trade.</P> <P>(6) It is engaged exclusively in scientific activities.</P> <P>(7) It is engaged exclusively in laying or repairing cables.</P> <P>(8) It is engaged in whaling or other fisheries, even though it may have entered a foreign port for fuel or supplies, if it did not carry passengers or merchandise in trade.</P> <P>(9) It is a passenger vessel making three trips or more a week between a port of the United States and a foreign port.</P> <P>(10) It is used exclusively as a ferry boat, including a car ferry.</P> <P>(11) It is a tug with a Great Lakes license endorsement on its vessel document, when towing vessels which are required to make entry.</P> <P>(12) It is a documented vessel with a Great Lakes license endorsement which has touched at an intermediate foreign port or ports during a coastwise voyage.</P> <P>(13) It enters otherwise than by sea from a foreign port at which tonnage or lighthouse duties or equivalent taxes are not imposed on vessels of the United States (applicable only where the vessel arrives from a port in the province of Ontario, Canada).</P> <P>(14) It is a coastwise-qualified vessel solely engaged in the coastwise trade (although arriving from a foreign port or place, it is engaged in the transportation of merchandise or passengers, or the towing of a vessel other than a vessel in distress, between points in the U.S. via a foreign point) (see §§ 4.80, 4.80a, 4.80b, and 4.92).</P> <P>(15) It is a vessel entering directly from the Virgin Islands (U.S.), American Samoa, the islands of Guam, Wake, Midway, Canton, or Kingman Reef, or Guantanamo Bay Naval Station.</P> <P>(16) It is a vessel making regular daily trips between any port of the United States and any port in Canada wholly upon interior waters not navigable to the ocean, except that such a vessel shall pay tonnage taxes upon her first arrival in each calendar year.</P> <P>(17) It is a vessel arriving at a port in the United States which, while proceeding between ports in the United States, touched at a foreign port under circumstances which would have exempted it from making entry under section 441(4), Tariff Act of 1930, as amended (19 U.S.C. 1441(4)), had it touched at a United States port.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 72-264, 37 FR 20317, Sept. 29, 1972; T.D. 75-110, 40 FR 21027, May 15, 1975; T.D. 75-206, 40 FR 34586, Aug. 18, 1975; T.D. 79-276, 44 FR 61956, Oct. 29, 1979; T.D. 83-214, 48 FR 46512, Oct. 13, 1983; T.D. 93-12, 58 FR 13197, Mar. 10, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.22</SECTNO> <SUBJECT>Exemptions from special tonnage taxes.</SUBJECT> <P>Vessels of the following nations are exempted by treaties, Presidential proclamations, or orders of the Secretary of the Treasury from the payment of any higher tonnage duties than are applicable to vessels of the United States and are exempted from the payment of light money: </P> <EXTRACT> <FP SOURCE="FP-1">Algeria.</FP> <FP SOURCE="FP-1">Antigua and Barbuda.</FP> <FP SOURCE="FP-1">Arab Republic of Egypt.</FP> <FP SOURCE="FP-1">Argentina.</FP> <FP SOURCE="FP-1">Australia.</FP> <FP SOURCE="FP-1">Austria.</FP> <FP SOURCE="FP-1">Bahamas, The.</FP> <FP SOURCE="FP-1">Bahrain.</FP> <FP SOURCE="FP-1">Bangladesh.</FP> <FP SOURCE="FP-1">Barbados.</FP> <FP SOURCE="FP-1">Belgium.</FP> <FP SOURCE="FP-1">Belize.</FP> <FP SOURCE="FP-1">Bermuda.</FP> <FP SOURCE="FP-1">Bolivia.</FP> <FP SOURCE="FP-1">Brazil.</FP> <FP SOURCE="FP-1">Bulgaria.</FP> <FP SOURCE="FP-1">Burma.</FP> <FP SOURCE="FP-1">Canada.</FP> <FP SOURCE="FP-1">Chile.</FP> <FP SOURCE="FP-1">Colombia.</FP> <FP SOURCE="FP-1">Costa Rica.</FP> <FP SOURCE="FP-1">Cuba.</FP> <FP SOURCE="FP-1">Cyprus.</FP> <FP SOURCE="FP-1">Czechoslovakia.</FP> <FP SOURCE="FP-1">Denmark (including the Faeroe Islands).</FP> <FP SOURCE="FP-1">Dominica.</FP> <FP SOURCE="FP-1">Dominican Republic.</FP> <FP SOURCE="FP-1">Ecuador.</FP> <FP SOURCE="FP-1">El Salvador.</FP> <FP SOURCE="FP-1">Estonia.</FP> <FP SOURCE="FP-1">Ethiopia.</FP> <FP SOURCE="FP-1">Fiji.</FP> <FP SOURCE="FP-1">Finland.</FP> <FP SOURCE="FP-1">France.<PRTPAGE P="31"/> </FP> <FP SOURCE="FP-1">Gambia, The.</FP> <FP SOURCE="FP-1">German Democratic Republic.</FP> <FP SOURCE="FP-1">German Federal Republic.</FP> <FP SOURCE="FP-1">Ghana.</FP> <FP SOURCE="FP-1">Great Britain (including the Cayman Islands).</FP> <FP SOURCE="FP-1">Greece.</FP> <FP SOURCE="FP-1">Greenland.</FP> <FP SOURCE="FP-1">Guatemala.</FP> <FP SOURCE="FP-1">Guinea, Republic of.</FP> <FP SOURCE="FP-1">Guyana.</FP> <FP SOURCE="FP-1">Haiti.</FP> <FP SOURCE="FP-1">Honduras.</FP> <FP SOURCE="FP-1">Hong Kong.</FP> <FP SOURCE="FP-1">Hungarian People's Republic</FP> <FP SOURCE="FP-1">Iceland.</FP> <FP SOURCE="FP-1">India.</FP> <FP SOURCE="FP-1">Indonesia.</FP> <FP SOURCE="FP-1">Iran.</FP> <FP SOURCE="FP-1">Iraq.</FP> <FP SOURCE="FP-1">Ireland (Eire).</FP> <FP SOURCE="FP-1">Israel.</FP> <FP SOURCE="FP-1">Italy.</FP> <FP SOURCE="FP-1">Ivory Coast, Republic of.</FP> <FP SOURCE="FP-1">Jamaica.</FP> <FP SOURCE="FP-1">Japan.</FP> <FP SOURCE="FP-1">Kenya.</FP> <FP SOURCE="FP-1">Korea.</FP> <FP SOURCE="FP-1">Kuwait.</FP> <FP SOURCE="FP-1">Latvia.</FP> <FP SOURCE="FP-1">Lebanon.</FP> <FP SOURCE="FP-1">Liberia.</FP> <FP SOURCE="FP-1">Libya.</FP> <FP SOURCE="FP-1">Luxembourg.</FP> <FP SOURCE="FP-1">Malaysia.</FP> <FP SOURCE="FP-1">Malta.</FP> <FP SOURCE="FP-1">Marshall Islands, Republic of.</FP> <FP SOURCE="FP-1">Mauritius.</FP> <FP SOURCE="FP-1">Mexico.</FP> <FP SOURCE="FP-1">Monaco.</FP> <FP SOURCE="FP-1">Morocco.</FP> <FP SOURCE="FP-1">Nauru, Republic of.</FP> <FP SOURCE="FP-1">Netherlands.</FP> <FP SOURCE="FP-1">Netherlands Antilles.</FP> <FP SOURCE="FP-1">New Zealand.</FP> <FP SOURCE="FP-1">Nicaragua.</FP> <FP SOURCE="FP-1">Nigeria.</FP> <FP SOURCE="FP-1">Norway.</FP> <FP SOURCE="FP-1">Oman.</FP> <FP SOURCE="FP-1">Pakistan.</FP> <FP SOURCE="FP-1">Panama.</FP> <FP SOURCE="FP-1">Papua New Guinea.</FP> <FP SOURCE="FP-1">Paraguay.</FP> <FP SOURCE="FP-1">People's Republic of China.</FP> <FP SOURCE="FP-1">Peru.</FP> <FP SOURCE="FP-1">Philippines.</FP> <FP SOURCE="FP-1">Poland.</FP> <FP SOURCE="FP-1">Portugal.</FP> <FP SOURCE="FP-1">Qatar.</FP> <FP SOURCE="FP-1">Rumania.</FP> <FP SOURCE="FP-1">Saudi Arabia.</FP> <FP SOURCE="FP-1">Senegal.</FP> <FP SOURCE="FP-1">Singapore, Republic.</FP> <FP SOURCE="FP-1">Somali, Republic.</FP> <FP SOURCE="FP-1">Spain.</FP> <FP SOURCE="FP-1">Sri Lanka.</FP> <FP SOURCE="FP-1">St. Vincent and The Grenadines.</FP> <FP SOURCE="FP-1">Surinam, Republic of.</FP> <FP SOURCE="FP-1">Sweden.</FP> <FP SOURCE="FP-1">Switzerland.</FP> <FP SOURCE="FP-1">Syrian Arab Republic.</FP> <FP SOURCE="FP-1">Taiwan.</FP> <FP SOURCE="FP-1">Thailand.</FP> <FP SOURCE="FP-1">Togo.</FP> <FP SOURCE="FP-1">Tonga.</FP> <FP SOURCE="FP-1">Tunisia.</FP> <FP SOURCE="FP-1">Turkey.</FP> <FP SOURCE="FP-1">Tuvalu.</FP> <FP SOURCE="FP-1">Union of South Africa.</FP> <FP SOURCE="FP-1">Union of Soviet Socialist Republics.</FP> <FP SOURCE="FP-1">United Arab Emirates (Abu Dhabi, Ajman, Dubai, Fujairah, Ras Al Khaimah, Sharjah, and Umm Al Qaiwain).</FP> <FP SOURCE="FP-1">Uruguay.</FP> <FP SOURCE="FP-1">Vanuatu, Republic of.</FP> <FP SOURCE="FP-1">Venezuela.</FP> <FP SOURCE="FP-1">Yugoslavia.</FP> <FP SOURCE="FP-1">Zaire.</FP> </EXTRACT> <CITA>[28 FR 14596, Dec. 31, 1963]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 4.22, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 4.23</SECTNO> <SUBJECT>Certificate of payment and cash receipt.</SUBJECT> <P>Upon each payment of tonnage tax or light money, the master of the vessel shall be given a certificate on Customs Form 1002 on which the control number of the cash receipt (Customs Form 368 or 368A) upon which payment was recorded shall be written. This certificate shall constitute the official evidence of such payment and shall be presented upon each entry during the tonnage year to establish the date of commencement of the tonnage year and to insure against overpayment. In the absence of the certificate, evidence of payment of tonnage tax shall be obtained from the port director to whom the payment was made.</P> <CITA>[T.D. 85-71, 50 FR 15415, Apr. 18, 1985, as amended by T.D. 92-56, 57 FR 24943, June 12, 1992]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.24</SECTNO> <SUBJECT>Application for refund of tonnage tax.</SUBJECT> <P>(a) The authority to make refunds in accordance with section 26 of the Act of June 26, 1884 (46 U.S.C. 8) of regular tonnage taxes described in § 4.20(a) is delegated to the Directors of the ports where the collections were made. If any <PRTPAGE P="32"/>doubt exists, the case shall first be referred to Headquarters, U.S. Customs Service for advice.</P> <P>(b) Each application for refund of regular or special tonnage tax or light money prepared in accordance with this section shall be filed with the Customs officer to whom payment was made. After verification of the pertinent facts asserted in the claim, the application shall be forwarded with any necessary report or recommendation to the appropriate port director. Applications for refund of special tonnage tax and light money (see § 4.20(c)) with the reports and recommendations submitted therewith shall be forwarded by the port director to the Commissioner of Customs for decision. Any refund authorized by the Port Director under paragraph (a) of this section or any refund of special tonnae tax or light money authorized by the Commissioner of Customs shall be made by the appropriate Customs officer. The records of tonnage tax shall be clearly noted to show each refund authorized.</P> <P>(c) The application shall be a direct request for the refund of a definite sum, showing concisely the reasons therefor, the nationality and name of the vessel, and the date, place, and amount of each payment for which refund is requested. The application shall be made within 1 year from date of the payment. A protest against a payment shall not be accepted as an application for its refund.</P> <P>(d) When the application is based upon a claim that more than five payments of regular tax at either the 2-cent or the 6-cent rate have been made during a tonnage year, the application shall be supported by a statement from the appropriate Customs officer at the port where the application is submitted and from the appropriate Customs officer at each port at which any claimed payment was made verifying the facts and showing in each case whether refunds have been authorized.</P> <P>(e) The application shall include a certificate by the owner or by the owner's agent that payment of tonnage tax at the applicable rate has been or will be made for each entry of the vessel on a voyage on which that rate is applicable before the end of the current tonnage year, exclusive of any payment which has been refunded or which may be refunded as a result of such application.</P> <P>(f) The owner or operator of the vessel involved, or other party in interest, may file with the port Director a petition addressed to the Commissioner of Customs for a review of the port director's decision on an application for refund of regular tonnage tax. Such petition shall be filed in duplicate within 30 days from the date of notice of the initial decision, shall completely identify the case, and shall set forth in detail the exceptions to the decision.</P> <CITA>[T.D. 71-274, 36 FR 21025, Nov. 3, 1971, as amended by T.D. 95-77, 60 FR 50010, Sept. 27, 1995]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Landing and Delivery of Cargo</HD> <SECTION> <SECTNO>§ 4.30</SECTNO> <SUBJECT>Permits and special licenses for unlading and lading.</SUBJECT> <P>(a) Except as prescribed in paragraph (f), (g), or (k) of this section or in § 123.8 of this chapter, and except in the case of a vessel exempt from entry or clearance fees under 19 U.S.C. 288, no passengers, cargo, baggage, or other article shall be unladen from a vessel which arrives directly or indirectly from any port or place outside the Customs territory of the U.S., including the adjacent waters (see § 4.6 of this part), or from a vessel which transits the Panama Canal and no cargo, baggage, or other article shall be laden on a vessel destined to a port or place outside the Customs territory of the U.S., including the adjacent waters (see § 4.6 of this part) if Customs supervision of such lading is required, until the port director shall have issued a permit or special license therefore on Customs Form 3171 or electronically pursuant to an authorized electronic data interchange system or other means of communication approved by the Customs Service.</P> <P>(1) U.S. and foreign vessels arriving at a U.S. port directly from a foreign port or place are required to make entry, whether it be formal or, as provided in § 4.8, preliminary, before the port director may issue a permit or special license to lade or unlade.</P> <P>(2) U.S. vessels arriving at a U.S. port from another U.S. port at which formal entry was made may be issued a permit <PRTPAGE P="33"/>or special license to lade or unlade without having to make either preliminary or formal entry at the second and subsequent ports. Foreign vessels arriving at a U.S. port from another U.S. port at which formal entry was made may be issued a permit or special license to lade or unlade at the second and subsequent ports prior to formal entry without the necessity of making preliminary entry. In these circumstances, after the master has reported arrival of the vessel, the port director may issue the permit or special license or may, in his discretion, require the vessel to be boarded, the master to make an oath or affirmation to the truth of the statements contained in the vessel's manifest to the Customs officer who boards the vessel, and require delivery of the manifest prior to issuing the permit.</P> <P>(b) Application for a permit or special license will be made by the master, owner, or agent of the vessel on Customs Form 3171, or electronically pursuant to an authorized electronic data interchange system or other means of communication approved by the Customs Service, and will specifically indicate the type of service desired at that time, unless a term permit or term special license has been issued. Vessels that arrive in a Customs port with more than one vessel carrier sharing or leasing space on board the vessel (such as under a vessel sharing or slot charter arrangement) are required to indicate on the CF 3171 all carriers on board the vessel and indicate whether each carrier is transmitting its cargo declaration electronically or is presenting it on the Customs Form 1302. In the case of a term permit or term special license, upon entry of each vessel, a copy of the term permit or special license must be submitted to Customs during official hours in advance of the rendering of services so as to update the nature of the services desired and the exact times they will be needed. Permits must also be updated to reflect any other needed changes including those in the name of the vessel as well as the slot charter or vessel sharing parties. An agent of a vessel may limit his application to operations involved in the entry and unlading of the vessel or to operations involved in its lading and clearance. Such limitation will be specifically noted on the application.</P> <P>(c) The request for a permit or a special license shall not be approved (previously issued term permits or special licenses shall be revoked) unless the carrier complies with the provisions of paragraphs (l) and (m) of this section regarding terminal facilities and employee lists, and the required cash deposit or bond has been filed on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter relating to international carriers. <SU>62</SU> <FTREF/> When a carrier has on file a bond on Customs Form 301, containing the bond conditions set forth in § 113.63 of this chapter relating to basic custodial bond conditions, no further bond shall be required solely by reason of the unlading or lading at night or on a Sunday or holiday of merchandise or baggage covered by bonded transportation entries. Separate bonds shall be required if overtime services are requested by different principals.</P> <FTNT> <P> <SU>62</SU> “Before any such special license to unlade shall be granted, the master, owner, or agent of such vessel or vehicle, or the person in charge of such vehicle, shall be required to deposit sufficient money to pay, or to give a bond in an amount to be fixed by the Secretary conditioned to pay, the compensation and expenses of the customs officers and employees assigned to duty in connection with such unlading at night or on Sunday or a holiday, in accordance with the provisions of section 5 of the act of February 13, 1911, as amended (U.S.C. 1952 edition, title 19 sec. 267). In lieu of such deposit or bond the owner or agent of any vessel or vehicle or line of vessels or vehicles may execute a bond in an amount to be fixed by the Secretary of the Treasury to cover and include the issuance of special licenses for the unlading of such vessels or vehicles for a period not to exceed one year. * * *” (Tariff Act of 1930, section 451, as amended, 19 U.S.C. 1451)</P> <P> <E T="51">63-66</E> [Reserved]</P> </FTNT> <P>(d) Except as prescribed in paragraph (f) or (g) of this section, a separate application for a permit or special license shall be filed in the case of each arrival.</P> <P>(e) Stevedoring companies and others concerned in lading or unlading merchandise, or in removing or otherwise securing it, shall ascertain that the applicable preliminary Customs requirements have been complied with before <PRTPAGE P="34"/>commencing such operation, since performance in the absence of such compliance render them severally liable to the penalties prescribed in section 453, Tariff Act of 1930, even though they may not be responsible for taking the action necessary to secure compliance.</P> <P>(f) The port director may issue a term permit on Customs Form 3171, which will remain in effect until revoked by the port director, terminated by the carrier, or automatically cancelled by termination of the supporting continuous bond, to unlade merchandise, passengers, or baggage, or to lade merchandise or baggage during official hours.</P> <P>(g) The port director may issue a term special license on Customs Form 3171, which will remain in effect until revoked by the port director, terminated by the carrier, or automatically cancelled by termination of the supporting continuous bond, to unlade merchandise, passengers, or baggage, or to lade merchandise or baggage during overtime hours or on a Sunday or holiday when Customs supervision is required. (See § 24.16 of this chapter regarding pleasure vessels.)</P> <P>(h) A special license for the unlading or lading of a vessel at night or on a Sunday or holiday shall be refused by the port director if the character of the merchandise or the conditions or facilities at the place of unlading or lading render the issuance of such special license dangerous to the revenue. In no case shall a special license for unlading or lading at night or on a Sunday or holiday be granted except on the ground of commercial necessity.</P> <P>(i) The port director shall not issue a permit or special license to unlade cargo or equipment of vessels arriving directly or indirectly from any port or place outside the United States, except on compliance with one or more of the following conditions:</P> <P>(1) The merchandise shall have been duly entered and permits issued; or</P> <P>(2) A bond on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter relating to international carriers, or cash deposit shall have been given; or</P> <P>(3) The merchandise is to be discharged into the custody of the port director as provided for in section 490(b), Tariff Act of 1930.</P> <P>(j) Bonds are not required under this section for vessels owned by the United States and operated for its account.</P> <P>(k) In the case of vessels of 5 net tons or over which are used exclusively as pleasure vessels and which arrive from any country, the port director in his discretion and under such conditions as he deems advisable may allow the required application for unlading passengers and baggage to be made orally, and may authorize his inspectors to grant oral permission for unlading at any time, and to grant requests on Customs Form 3171 for overtime services.</P> <P>(l) A permit to unlade pursuant to this part 4 or part 122 of this chapter shall not be granted unless the port director determines that the applicant provides or the terminal at which the applicant will unlade the cargo provides (1) sufficient space, capable of being locked, sealed, or otherwise secured, for the storage immediately upon unlading of cargo whose weight-to-value ratio renders it susceptible to theft or pilferage and of packages which have been broken prior to or in the course of unlading; and (2) an adequate number of vehicles, capable of being locked, sealed, or otherwise secured, for the transportation of such cargo or packages between the point of unlading and the point of storage. A term permit to unlade shall be revoked if the port director determines subsequent to such issuance that the requirements of this paragraph have not been met.</P> <P>(m) A permit to unlade pursuant to this part 4 or part 122 of this chapter shall not be granted to an importing carrier, and a term permit to unlade previously granted to such a carrier shall be revoked, (1) if such carrier, within 30 days after the date of receipt of a written demand by the port director, does not furnish a written list of the names, addresses, social security numbers, and dates and places of birth of persons it employs in connection with the unlading, storage and delivery of imported merchandise; or (2) if, having furnished such a list, the carrier does not advise the port director in writing of the names, addresses, social security numbers, and dates and places <PRTPAGE P="35"/>of birth of any new personnel employed in connection with the unlading, storage and delivery of imported merchandise within 10 days after such employment. If the employment of any such person is terminated, the carrier shall promptly advise the port director. For the purposes of this part, a person shall not be deemed to be employed by a carrier if he is an officer or employee of an independent contractor engaged by a carrier to load, unload, transport or otherwise handle cargo.</P> <P>(n)(1) Customs will not issue a permit to unlade before it has received the cargo declaration information pursuant to § 4.7(b). In cases in which Customs does not receive complete cargo manifest information from the carrier or from the NVOCC, in the manner and format required by § 4.7(b), 24 hours prior to the lading of the cargo aboard the vessel at the foreign port, Customs may delay issuance of a permit to unlade the entire vessel until all required information is received. Customs may also decline to issue a permit to unlade the specific cargo for which a declaration is not received 24 hours before lading in a foreign port. Furthermore, where the carrier does not present an advance cargo manifest to Customs electronically, in the manner provided in § 4.7(b)(2), preliminary entry pursuant to § 4.8(b) will be denied.</P> <P>(2) In addition, while the advance presentation of the cargo manifest for any vessel subject to § 4.7(b)(2) may be made in paper form or by electronic transmission through a Customs-approved electronic data interchange system, the submission of an electronic manifest for the cargo in this regard, as opposed to a paper manifest, will further facilitate the prompt issuance of a permit to unlade the cargo.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 68-247, 33 FR 15022, Oct. 8, 1968; T.D. 71-39, 36 FR 1891, Feb. 3, 1971; T.D. 72-189, 38 FR 13975, July 15, 1972; T.D. 73-27, 38 FR 2448, Jan. 26, 1973; T.D. 84-213, 49 FR 41163, Oct. 19, 1984; T.D. 88-12, 53 FR 9314, Mar. 22, 1988; T.D. 92-74, 57 FR 35751, Aug. 11, 1992; T.D. 93-66, 58 FR 44130, Aug. 19, 1993; T.D. 93-96, 58 FR 67316, Dec. 21, 1993; T.D. 94-2, 58 FR 68523, Dec. 28, 1993; T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 96-11, 61 FR 2414, Jan. 26, 1996; T.D. 93-96, 61 FR 3569, Feb. 1, 1996; T.D. 00-4, 65 FR 2873, Jan. 19, 2000; T.D. 02-62, 67 FR 66332, Oct. 31, 2002]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.31</SECTNO> <SUBJECT>Unlading or transshipment due to casualty.</SUBJECT> <P>(a) When any cargo or stores of a vessel have been unladen or transshipped at any place in the United States or its Customs waters other than a port of entry because of accident, stress of weather, or other necessity, no penalty shall be imposed under section 453 or 586(a), Tariff Act of 1930, if due notice is given to the director of the port at which the vessel thereafter first arrives and satisfactory proof is submitted to him as provided for in section 586(f), Tariff Act of 1930, as amended, regarding such accident, stress of weather, or other necessity. The port director may accept the certificates of the master and two or more officers or members of the crew of the vessel, of whom the person next to the master in command shall be one, as proof that the unlading or transshipment was necessary by reason of unavoidable cause.</P> <P>(b) The port director may then permit entry of the vessel and its cargo and permit the unlading of the cargo in such place at the port as he may deem proper. Unless its transportation has been in violation of the coastwise laws, the cargo may be cleared through Customs at the port where it is discharged or forwarded to the port of original destination under an entry for immediate transportation or for transportation and exportation, as the case may be. All regulations shall apply in such cases as if the unlading and delivery took place at the port of original destination.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 95-77, 60 FR 50010, Sept. 27, 1995]</CITA> </SECTION> <SECTION> <PRTPAGE P="36"/> <SECTNO>§ 4.32</SECTNO> <SUBJECT>Vessels in distress; landing of cargo.</SUBJECT> <P>(a) When a vessel from a foreign port arrives in distress at a port other than that to which it is destined, a permit to land merchandise or baggage may be issued if such action is necessary. Merchandise and baggage so unladen shall be taken into Customs custody and, if it has not been transported in violation of the coastwise laws, may be entered and disposed of in the same manner as any other imported merchandise or may be reladen without entry to be carried to its destination on the vessel from which it was unladen, subject only to charges for storage and safekeeping.</P> <P>(b) A bond on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter relating to international carriers shall be given in an amount to be determined by the port director to insure the proper disposition of the cargo, whether such cargo be dutiable or free.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 84-213, 49 FR 41164, Oct. 19, 1984]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.33</SECTNO> <SUBJECT>Diversion of cargo.</SUBJECT> <P>(a) <E T="03">Unlading at other than original port of destination.</E> A vessel may unlade cargo or baggage at an alternative port of entry to the port of original destination if:</P> <P>(1) It is compelled by any cause to put into the alternative port and the director of that port issues a permit for the unlading of cargo or baggage; or</P> <P>(2) As a result of an emergency existing at the port of destination, the port director authorizes the vessel to proceed in accordance with the residue cargo bond procedure to the alternative port. The owner or agent of the vessel shall apply for such authorization in writing, stating the reasons and agreeing to hold the port director and the Government harmless for the diversion.</P> <P>(b) <E T="03">Disposition of cargo or baggage at emergency port.</E> Cargo and baggage unladen at the alternative port under the circumstances set forth in paragraph (a) of this section may be:</P> <P>(1) Entered in the same manner as other imported cargo or baggage;</P> <P>(2) Treated as unclaimed and stored at the risk and expense of its owner; or</P> <P>(3) Reladen upon the same vessel without entry, for transportation to its original destination.</P> <P>(c) <E T="03">Substitution of ports of discharge on manifest.</E> After entry, the Cargo Declaration, Customs Form 1302, of a vessel may be changed at any time to permit discharge of manifested cargo at any domestic port in lieu of any other port shown on the Cargo Declaration, if:</P> <P>(1) A written application for the diversion is made on the amended Cargo Declaration by the master, owner, or agent of the vessel to the director of the port where the vessel is located, after entry of the vessel at that port;</P> <P>(2) An amended Cargo Declaration, under oath, covering the cargo, which it is desired to divert, is furnished in support of the application and is filed in such number of copies as the port director shall require for local Customs purposes; and</P> <P>(3) The certified traveling manifest is not altered or added to in any way by the master, owner, or agent of the vessel. When an application under paragraph (c)(1) of this section is approved, the port director shall securely attach an approved copy of the amended manifest to the traveling manifest and shall send one copy of the amended Cargo Declaration to the director of the port where the vessel's bond was filed.</P> <P>(d) <E T="03">Retention of cargo on board for later return to the United States.</E> If, as the result of a strike or other emergency at a United States port for which inward foreign cargo is manifested, it is desired to retain the cargo on board the vessel for discharge at a foreign port but with the purpose of having the cargo returned to the United States, an application may be made by the master, owner, or agent of the vessel to amend the vessel's Cargo Declaration, Customs Form 1302, under a procedure similar to that described in paragraph (c) of this section, except that a foreign port shall be substituted for the domestic port of discharge. If the application is approved, it shall be handled in the same manner as an application filed under paragraph (c) of this section. However, before approving the application, the port director is authorized to <PRTPAGE P="37"/>require such bond as he deems necessary to insure that export control laws and regulations are not circumvented.</P> <CITA>[T.D. 77-255, 42 FR 56320, Oct. 25, 1977]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.34</SECTNO> <SUBJECT>Prematurely discharged, overcarried, and undelivered cargo.</SUBJECT> <P>(a) <E T="03">Prematurely landed cargo.</E> Upon receipt of a satisfactory written application from the owner or agent of a vessel establishing that cargo was prematurely landed and left behind by the importing vessel through error or emergency, the port director may permit inward foreign cargo remaining on the dock to be reladen on the next available vessel owned or chartered by the owner of the importing vessel for transportation to the destination shown on the Cargo Declaration, Customs Form 1302, of the first vessel, provided the importing vessel actually entered the port of destination of the prematurely landed cargo. Unless so forwarded within 30 days from the date of landing, the cargo shall be appropriately entered for Customs clearance or for forwarding in bond; otherwise, it shall be sent to general order as unclaimed. If the merchandise is so entered for Customs clearance at the port of unlading, or if it is so forwarded in bond, other than by the importing vessel or by another vessel owned or chartered by the owner of the importing vessel, representatives of the importing vessel shall file at the port of unlading a Cargo Declaration in duplicate listing the cargo. The port director shall retain the original and forward the duplicate to the director of the originally intended port of discharge.</P> <P>(b) <E T="03">Overcarried cargo.</E> Upon receipt of a satisfactory written application by the owner or agent of a vessel establishing that cargo was not landed at its destination and was overcarried to another domestic port through error or emergency, the port director may permit the cargo to be returned in the importing vessel, or in another vessel owned or chartered by the owner of the importing vessel, to the destination shown on the Cargo Declaration, Customs Form 1302, of the importing vessel, provided the importing vessel actually entered the port of destination. <SU>67</SU> <FTREF/> </P> <FTNT> <P> <SU>67</SU> See § 141.69(c) of this chapter for the conditions under which such merchandise and goods removed from a port of intended entry under these or certain other circumstances may subsequently be cleared under a consumption entry which had been filed therefore before the merchandise was removed from the port of intended entry.</P> <P> <E T="51">68-69</E> [Reserved]</P> </FTNT> <P>(c) <E T="03">Inaccessibly stowed cargo.</E> Cargo so stowed as to be inaccessible upon arrival at destination may be retained on board, carried forward to another domestic port or ports, and returned to the port of destination in the importing vessel or in another vessel owned or chartered by the owner of the importing vessel in the same manner as other overcarried cargo.</P> <P>(d) <E T="03">Application for forwarding cargo.</E> When it is desired that prematurely landed cargo, overcarried cargo, or cargo so stowed as to be inaccessible, be forwarded to its destination by the importing vessel or by another vessel owned or chartered by the owner of the importing vessel in accordance with paragraph (a), (b), or (c) of this section, the required application shall be filed with the local director of the port of premature landing or overcarriage by the owner or agent of the vessel. The application shall be supported by a Cargo Declaration, Customs Form 1302, in such number of copies as the port director may require. Whenever practicable, the application shall be made on the face of the Cargo Declaration below the description of the merchandise. The application shall specify the vessel on which the cargo was imported, even though the forwarding to destination is by another vessel owned or chartered by the owner of the importing vessel, and all ports of departure and dates of sailing of the importing vessel. The application shall be stamped and signed to show that it has been approved.</P> <P>(e) <E T="03">Manifesting prematurely landed or overcarried cargo.</E> One copy of the Cargo Declaration, Customs Form 1302, shall be certified by Customs for use as a substitute traveling manifest for the prematurely landed or overcarried cargo being forwarded as residue cargo, whether or not the forwarding vessel is <PRTPAGE P="38"/>also carrying other residue cargo. If the application for forwarding is made on the Cargo Declaration, the new substitute traveling manifest shall be stamped to show the approval of the application. If the application is on a separate document, a copy thereof, stamped to show its approval, shall be attached to the substitute traveling manifest. An appropriate cross-reference shall be placed on the original traveling manifest to show that the vessel has one or more substitute traveling manifests. A permit to proceed endorsed on a Vessel Entrance or Clearance Statement, Customs Form 1300, issued to the vessel transporting the prematurely landed or overcarried cargo to its destination shall make reference to the nature of such cargo, identifying it with the importing vessel.</P> <P>(f) <E T="03">Residue cargo procedure.</E> A vessel with prematurely landed or overcarried cargo on board shall comply upon arrival at all domestic ports of call with all the requirements of part 4 relating to foreign residue cargo for domestic ports. The substitute traveling manifest, carried forward from port to port by the oncarrying vessel, shall be finally surrendered at the port where the last portion of the prematurely landed or overcarried cargo is discharged.</P> <P>(g) <E T="03">Cargo undelivered at foreign port and returned to the U.S.</E> Merchandise shipped from a domestic port, but undelivered at the foreign destination and returned, shall be manifested as “Undelivered-to be returned to original foreign destination,” if such a return is intended. The port director may issue a permit to retain the merchandise on board, or he may, upon written application of the steamship company, issue a permit on a Delivery Ticket, Customs Form 6043, allowing the merchandise to be transferred to another vessel for return to the original foreign destination. No charge shall be made against the bond on Customs Form 301, containing the bond conditions relating to international carriers set forth in § 113.64 of this chapter. The items shall be remanifested outward and an explanatory reference of the attending circumstances and compliance with export requirements noted.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 77-255, 42 FR 56321, Oct. 25, 1977; T.D. 85-123, 50 FR 29952, July 23, 1985; T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 00-22, 65 FR 16515, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.35</SECTNO> <SUBJECT>Unlading outside port of entry.</SUBJECT> <P>(a) Upon written application from the interested party, the port director concerned, if he considers it necessary, may permit any vessel laden with merchandise in bulk to proceed, after entry, to any place outside the port where the vessel entered which such port director may designate for the purpose of unlading such cargo.</P> <P>(b) In such case a deposit of a sum sufficient to reimburse the Government for the compensation, travel, and subsistence expenses of the officers detailed to supervise the unlading and delivery of the cargo may be required by the port director.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended at T.D. 95-77, 60 FR 50010, Sept. 27, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.36</SECTNO> <SUBJECT>Delayed discharge of cargo.</SUBJECT> <P>(a) When pursuant to section 457, Tariff Act of 1930, customs officers are placed on a vessel which has retained merchandise on board more than 25 days after the date of the vessel's arrival, their compensation and subsistence expenses shall be reimbursed to the Government by the owner or master.</P> <P>(b) The compensation of all Customs officers and employees assigned to supervise the discharge of a cargo within the purview of section 458, Tariff Act of 1930, <SU>70</SU> <FTREF/> after the expiration of 25 days after the date of the vessel's entry <PRTPAGE P="39"/>shall be reimbursed to the Government by the owner or master of the vessel.</P> <FTNT> <P> <SU>70</SU> “The limitation of time for unlading shall not extend to vessels laden exclusively with merchandise in bulk consigned to one consignee and arriving at a port for orders, but if the master of such vessel requests a longer time to discharge its cargo, the compensation of the inspectors or other customs officers whose services are required in connection with the unlading shall, for every day consumed in unlading in excess of twenty-five (25) days from the date of the vessel's entry, be reimbursed by the master or owner of such vessel.” (Tariff Act of 1930, sec. 458; 19 U.S.C. 1458)</P> <P> <E T="51">71-75</E> [Reserved]</P> </FTNT> <P>(c) When cargo is manifested “for orders” upon the arrival of the vessel, no amendment of the manifest to show another port of discharge shall be permitted after 15 days after the date of the vessel's arrival, except as provided for in § 4.33.</P> <P>(d) All reimbursements payable in accordance with this section shall be paid or secured to the port director before clearance is granted to the vessel.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 98-74, 63 FR 51287, Sept. 25, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.37</SECTNO> <SUBJECT>General order.</SUBJECT> <P>(a) Any merchandise or baggage regularly landed but not covered by a permit for its release shall be allowed to remain at the place of unlading until the fifteenth calendar day after landing. No later than 20 calendar days after landing, the master or owner of the vessel or the agent thereof shall notify Customs of any such merchandise or baggage for which entry has not been made. Such notification shall be provided in writing or by any appropriate Customs-authorized electronic data interchange system. Failure to provide such notification may result in assessment of a monetary penalty of up to $1,000 per bill of lading against the master or owner of the vessel or the agent thereof. If the value of the merchandise on the bill is less than $1,000, the penalty shall be equal to the value of such merchandise.</P> <P>(b) Any merchandise or baggage that is taken into custody from an arriving carrier by any party under a Customs-authorized permit to transfer or in-bond entry may remain in the custody of that party for 15 calendar days after receipt under such permit to transfer or 15 calendar days after arrival at the port of destination. No later than 20 calendar days after receipt under the permit to transfer or 20 calendar days after arrival under bond at the port of destination, the party shall notify Customs of any such merchandise or baggage for which entry has not been made. Such notification shall be provided in writing or by any appropriate Customs-authorized electronic data interchange system. If the party fails to notify Customs of the unentered merchandise or baggage in the allotted time, he may be liable for the payment of liquidated damages under the terms and conditions of his custodial bond (see § 113.63(c)(4) of this chapter).</P> <P>(c) In addition to the notification to Customs required under paragraphs (a) and (b) of this section, the carrier (or any other party to whom custody of the unentered merchandise has been transferred by a Customs authorized permit to transfer or in-bond entry) shall provide notification of the presence of such unreleased and unentered merchandise or baggage to a bonded warehouse certified by the port director as qualified to receive general order merchandise. Such notification shall be provided in writing or by any appropriate Customs-authorized electronic data interchange system and shall be provided within the applicable 20-day period specified in paragraph (a) or (b) of this section. It shall then be the responsibility of the bonded warehouse proprietor to arrange for the transportation and storage of the merchandise or baggage at the risk and expense of the consignee. The arriving carrier (or other party to whom custody of the merchandise was transferred by the arriving carrier under a Customs-authorized permit to transfer or in-bond entry) is responsible for preparing a Customs Form (CF) 6043 (Delivery Ticket), or other similar Customs document designated by the port director or an electronic equivalent as authorized by Customs, to cover the proprietor's receiptof the merchandise and its transport to the warehouse from the custody of the arriving carrier (or other party to whom custody of the merchandise was transferred by the carrier under a Customs-authorized permit to transfer or in-bond entry) (<E T="03">see</E> § 19.9 of this chapter). Any unentered merchandise or baggage shall remain the responsibility of the carrier, master, or person in charge of the importing vessel or the agent thereof or party to whom the merchandise has been transferred under a Customs authorized permit to transfer or in-bond entry, until it is properly transferred from his control in accordance with this paragraph. If the party <PRTPAGE P="40"/>to whom custody of the unentered merchandise or baggage has been transferred by a Customs-authorized permit to transfer or in-bond entry fails to notify a Customs-approved bonded warehouse of such merchandise or baggage within the applicable 20-calendar-day period, he may be liable for the payment of liquidated damages of $1,000 per bill of lading under the terms and conditions of his international carrier or custodial bond (see §§ 113.63(b), 113.63(c) and 113.64(b) of this chapter).</P> <P>(d) If a carrier or any other party to whom custody of the unentered merchandise has been transferred by means of a Customs-authorized permit to transfer or in-bond entry fails to timely relinquish custody of the merchandise to a Customs-approved bonded General Order warehouse, the carrier or other party may be liable for liquidated damages equal to the value of that merchandise under the terms and conditions of his international carrier or custodial bond, as applicable.</P> <P>(e) If the bonded warehouse operator fails to take possession of unentered and unreleased merchandise or baggage within five calendar days after receipt of notification of the presence of such merchandise or baggage under this section, he may be liable for the payment of liquidated damages under the terms and conditions of his custodial bond (see § 113.63(a)(1) of this chapter). If the port director finds that the warehouse operator cannot accept the goods because they are required by law to be exported or destroyed (<E T="03">see</E> § 127.28 of this chapter), or for other good cause, the goods will remain in the custody of the arriving carrier or other party to whom the goods have been transferred under a Customs-authorized permit to transfer or in-bond entry. In this event, the carrier or other party will be responsible under bond for exporting or destroying the goods, as necessary (<E T="03">see</E> §§ 113.63(c)(3) and 113.64(b) of this chapter).</P> <P>(f) In ports where there is no bonded warehouse authorized to accept general order merchandise or if merchandise requires specialized storage facilities which are unavailable in a bonded facility, the port director, after having received notice of the presence of unentered merchandise or baggage in accordance with the provisions of this section, shall direct the storage of the merchandise by the carrier or by any other appropriate means.</P> <P>(g) Whenever merchandise remains on board any vessel from a foreign port more than 25 days after the date on which report of arrival of such vessel was made, the port director, as prescribed in section 457, Tariff Act of 1930, as amended (19 U.S.C. 1457), may take possession of such merchandise and cause it to be unladen at the expense and risk of the owners of the merchandise. Any merchandise so unladen shall be sent forthwith by the port director to a general order warehouse and stored at the risk and expense of the owners of the merchandise.</P> <P>(h) Merchandise taken into the custody of the port director pursuant to section 490(b), Tariff Act of 1930, as amended (19 U.S.C. 1490(b)), shall be sent to a general order warehouse after 1 day after the day the vessel was entered, to be held there at the risk and expense of the consignee.</P> <CITA>[T.D. 98-74, 63 FR 51287, Sept. 25, 1998, as amended by T.D. 02-65, 67 FR 68032, Nov. 8, 2002]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.38</SECTNO> <SUBJECT>Release of cargo.</SUBJECT> <P>(a) No imported merchandise shall be released from Customs custody until a permit to release such merchandise has been granted. Such permit shall be issued by the port director only after the merchandise has been entered and, except as provided for in § 141.102(d) or part 142 of this chapter, the duties thereon, if any, have been estimated and paid. Generally, the permit shall consist of a document authorizing delivery of a particular shipment or an electronic equivalent. Alternatively, the permit may consist of a report which lists those shipments which have been authorized for release. This alternative cargo release notification may be used when the manifest is not filed by the carrier through the Automated Manifest System, the entry has been filed through the Automated Broker Interface, and Customs has approved the cargo for release without submission of paper documents after reviewing the entry data submitted electronically through ABI and its selectivity <PRTPAGE P="41"/>criteria (see § 143.34). The report shall be posted in a conspicuous area to which the public has access in the customhouse at the port of entry where the cargo was imported.</P> <P>(1) Where the cargo arrives by vessel, the report shall consist of the following data elements:</P> <P>(i) Vessel name or code, if transmitted by the entry filer;</P> <P>(ii) Carrier code;</P> <P>(iii) Voyage number, if transmitted by the entry filer;</P> <P>(iv) Bill of lading number;</P> <P>(v) Quantity released; and</P> <P>(vi) Entry number (including filer code).</P> <P>(2) Where the cargo arrives by air, the report shall consist of the following data elements:</P> <P>(i) Air waybill number;</P> <P>(ii) Quantity released;</P> <P>(iii) Entry number (including filer code);</P> <P>(iv) Carrier code; and</P> <P>(v) Flight number, if transmitted by the entry filer.</P> <P>(3) In the case of merchandise traveling via in-bond movement, the report will contain the following data elements:</P> <P>(i) Immediate transportation bond number;</P> <P>(ii) Carrier code;</P> <P>(iii) Quantity released; and</P> <P>(iv) Entry number (including filer code).</P> <FP>When merchandise is released without proper permit before entry has been made, the port director shall issue a written demand for redelivery. The carrier or facility operator shall redeliver the merchandise to Customs within 30 days after the demand is made. The port director may authorize unentered merchandise brought in by one carrier for the account of another carrier to be transferred within the port to the latter carrier's facility. Upon receipt of the merchandise the latter carrier assumes liability for the merchandise to the same extent as though the merchandise had arrived on its own vessel.</FP> <P>(b) When packages of merchandise bear marks or numbers which differ from those appearing on the Cargo Declaration, Customs Form 1302, of the importing vessel for the same packages and the importer or a receiving bonded carrier, with the concurrence of the importing carrier, makes application for their release under such marks or numbers, either for consumption or for transportation in bond under an entry filed therefor at the port of discharge from the importing vessel, the port director may approve the application upon condition that (1) the contents of the packages be identified with an invoice or transportation entry as set forth below and (2) the applicant furnish at his own expense any bonded cartage or lighterage service which the granting of the application may require. The application shall be in writing in such number of copies as may be required for local Customs purposes. Before permitting delivery of packages under such an application, the port director shall cause such examination thereof to be made as will reasonably identify the contents with the invoice filed with the consumption entry. If the merchandise is entered for transportation in bond without the filing of an invoice, such examination shall be made as will reasonably identify the contents of the packages with the transportation entry.</P> <P>(c) If the port director determines that, in a port or portion of a port, the volume of cargo handled, the incidence of theft or pilferage, or any other factor related to the protection of merchandise in Customs custody requires such measures, he shall require as a condition to the granting of a permit to release imported merchandise that the importer or his agent present to the carrier or his agent a fully executed pickup order in substantially the following format, in triplicate, to obtain delivery of any imported merchandise:</P> <GPH DEEP="198" SPAN="2"> <PRTPAGE P="42"/> <GID>EC14NO91.167</GID> </GPH> <FP>The pickup order shall contain a duly authenticated customhouse broker's signature, unless it is presented by a person properly identified as an employee or agent of the ultimate consignee. When delivered quantities are verified by a Customs officer, he shall certify all copies of the pickup order, returning one to the importer or his agent and two to the carrier making delivery.</FP> <P>(d) When the provisions of paragraph (c) of this section are invoked by the port director and verification of delivered quantities by Customs is required, a permit to release merchandise shall be effective as a release from Customs custody at the time that the delivery of the merchandise covered by the pickup order into the physical possession of a subsequent carrier or an importer or the agent of either is completed under the supervision of a Customs officer, and only to the extent of the actual delivery of merchandise described in such pickup order as verified by such Customs officer.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 71-39, 36 FR 1892, Feb. 3, 1971; T.D. 77-255, 42 FR 56321, Oct. 25, 1977; T.D. 91-46, 56 FR 22330, May 15, 1991; 56 FR 27559, June 14, 1991]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.39</SECTNO> <SUBJECT>Stores and equipment of vessels and crews' effects; unlading or lading and retention on board.</SUBJECT> <P>(a) The provisions of § 4.30 relating to unlading under a permit on Customs Form 3171 are applicable to the unlading of articles, other than cargo or baggage, which have been laden on a vessel outside the Customs territory of the United States, regardless of the trade in which the vessel may be engaged at the time of unlading, except that such provisions do not apply to such articles which have already been entered.</P> <P>(b) Any articles other than cargo or baggage landed for delivery for consumption in the United States shall be treated in the same manner as other imported articles. A notation as to the landing of such articles, together with the number of the entry made therefor, shall be made on the vessel's store list, but such notation shall not subject the articles to the requirement of being included in a post entry to the manifest.</P> <P>(c) Bags or dunnage constituting equipment of a vessel may be landed temporarily and reladen on such vessel under Customs supervision without entry.</P> <P>(d) Articles claimed to be sea or ships' stores which are in excess of the reasonable requirements of the vessel <PRTPAGE P="43"/>on which they are found shall be treated as cargo of such vessel.</P> <P>(e) Under section 446, Tariff Act of 1930, port directors may permit narcotic drugs, except smoking opium, in reasonable quantities and properly listed as medical stores to remain on board vessels if satisfied that such drugs are adequately safeguarded and used only as medical supplies.</P> <P>(f) Application for permission to transfer bunkers, stores or equipment as provided for in the proviso to section 446, Tariff Act of 1930, shall be made and the permit therefor granted on Customs Form 3171.</P> <P>(g) Equipment of a vessel arriving either directly or indirectly from a foreign port or place, if in need of repairs in the United States, may be unladen from and reladen upon the same vessel under the procedures set forth in § 4.30 relating to the granting of permits and special licenses on Customs Form 3171 (CF 3171). Adequate protection of the revenue is insured under the appropriate International Carrier Bond during the period that equipment is temporarily landed for repairs (see § 113.64(b) of this chapter), and so resort to the procedures established for the temporary importation of merchandise under bond is unnecessary. Once equipment which has been unladen under the terms of a CF 3171 has been reladen on the same vessel, potential liability for that transaction existing under the bond will be extinguished.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 93-66, 58 FR 44130, Aug. 19, 1993; T.D. 00-61, 65 FR 56790, Sept. 20, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.40</SECTNO> <SUBJECT>Equipment, etc., from wrecked or dismantled vessels.</SUBJECT> <P>Ship's or sea stores, supplies, and equipment of a vessel wrecked either in the waters of the United States or outside such waters, on being recovered and brought into a United States port, and like articles landed from a vessel dismantled in a United States port shall be subject to the same Customs treatment as would apply if the articles were landed from a vessel arriving in the ordinary course of trade. Parts of the hull and fittings recovered from a vessel which arrived in the United States in the course of navigation and was wrecked in the waters of the United States or was dismantled in this country are free of duties and import taxes, but if such articles are recovered from vessels outside the waters of the United States and brought into a United States port, they shall be treated as imported merchandise.</P> </SECTION> <SECTION> <SECTNO>§ 4.41</SECTNO> <SUBJECT>Cargo of wrecked vessel.</SUBJECT> <P>(a) Any cargo landed from a vessel wrecked in the waters of the United States or on the high seas shall be subject at the port of entry to the same entry requirements and privileges as the cargo of a vessel regularly arriving in the foreign trade. In lieu of a Cargo Declaration, Customs Form 1302, to cover such cargo, the owner, underwriter (if the merchandise has been abandoned to him), or the salvor of the merchandise shall make entry on Customs Form 7501, and any such applicant shall be regarded as the consignee of the merchandise for Customs purposes. <SU>76</SU> <FTREF/> </P> <FTNT> <P> <SU>76</SU> “* * * The underwriters of abandoned merchandise and the salvors of merchandise saved from a wreck at sea or on or along a coast of the United States may be regarded as the consignees.”* * * (Tariff Act of 1930, sec. 483; 19 U.S.C. 1483)</P> </FTNT> <P>(b) All such merchandise shall be taken into possession by the director of the port where it shall first arrive and be retained in his custody pending entry. If it is not entered by the person entitled to make entry, or is not disposed of pursuant to court order, it shall be subject to sale as unclaimed merchandise.</P> <P>(c) If such merchandise is from a vessel which has been sunk in waters of the United States for 2 years or more and has been abandoned by the owner, any person who has salvaged the cargo shall be permitted to enter the merchandise at the port where the vessel was wrecked free of duty upon the facts being established to the satisfaction of the director of the port of entry. <SU>77</SU> <FTREF/> Any <PRTPAGE P="44"/>other such merchandise is subject to the same tariff classification as like merchandise regularly imported in the ordinary course of trade.</P> <FTNT> <P> <SU>77</SU> “Whenever any vessel laden with merchandise, in whole or in part subject to duty, has been sunk in any river, harbor, bay, or waters subject to the jurisdiction of the United States, and within its limits, for the period of two years and is abandoned by the owner thereof, any person who may raise such vessel shall be permitted to bring any merchandise recovered therefrom into the <PRTPAGE/>port nearest to the place where such vessel was so raised free from the payment of any duty thereupon, but under such regulations as the Secretary of the Treasury may prescribe.” (Tariff Act of 1930, sec. 310; 19 U.S.C. 1310)</P> </FTNT> <P>(d) If the merchandise is libeled for salvage, <SU>78</SU> <FTREF/> the port director shall notify the United States attorney of the claim of the United States for duties, and request him to intervene for such duties.</P> <FTNT> <P> <SU>78</SU> Salvors have an uncertain interest in the goods salved, dependent upon the decree of a competent tribunal, and have a presumptive right without such decree to possession of merchandise salved by them from abandoned wrecks. The salvors are entitled in either case to make entry of derelict or wrecked goods.</P> <P> <E T="51">79-96</E> [Reserved]</P> </FTNT> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 77-255, 42 FR 56321, Oct. 25, 1977; T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 99-27, 64 FR 13675, Mar. 22, 1999]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Passengers on Vessels</HD> <SECTION> <SECTNO>§ 4.50</SECTNO> <SUBJECT>Passenger lists.</SUBJECT> <P>(a) The master of every vessel arriving at a port of the United States from a port or place outside the Customs territory (see § 4.6 of this part) and required to make entry, except a vessel arriving from Canada, otherwise than by sea, at a port on the Great Lakes, or their connections or tributary waters, shall submit passenger and crew lists, as required by § 4.7(a) of this part. If the vessel is arriving from noncontiguous foreign territory and is carrying steerage passengers, the additional information respecting such passengers required by Customs and Immigration Form I-418 shall be included therein.</P> <P>(b) A passenger within the meaning of this part is any person carried on a vessel who is not connected with the operation of such vessel, her navigation, ownership, or business.</P> <CITA>[28 FR 14596, Dec. 31, 1963 as amended by T.D. 71-169, 36 FR 12603, July 2, 1971; T.D. 82-145, 47 FR 35475, Aug. 16, 1982; T.D. 93-96, 58 FR 67316, Dec. 21, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.51</SECTNO> <SUBJECT>Reporting requirements for individuals arriving by vessel.</SUBJECT> <P>(a) <E T="03">Arrival of vessel reported.</E> Individuals on vessels, which have reported their arrival to Customs in accordance with19 U.S.C. 1433 and § 4.2 of this part, shall remain on board until authorized by Customs to depart. Upon departing the vessel, such individuals shall immediately report to a designated Customs location together with all of their accompanying articles.</P> <P>(b) <E T="03">Arrival of vessel not reported.</E> Individuals on vessels, which have not reported their arrival to Customs in accordance with 19 U.S.C. 1433 and § 4.2 of this part, shall immediately notify Customs and report their arrival together with appropriate information regarding the vessel, and shall present themselves and their accompanying articles at a designated Customs location.</P> <P>(c) <E T="03">Departure from designated Customs location.</E> Individuals required to report to designated Customs locations under this section shall not depart from such locations until authorized to do so by any appropriate Customs officer.</P> <CITA>[T.D. 93-96, 58 FR 67316, Dec. 21, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.52</SECTNO> <SUBJECT>Penalties applicable to individuals.</SUBJECT> <P>Individuals violating any of the reporting requirements of § 4.51 of this part or who present any forged, altered, or false document or paper to Customs in connection with this section, may be liable for certain civil penalties, as provided under 19 U.S.C. 1459, in addition to other penalties applicable under other provisions of law. Further, if the violation of these reporting requirements is intentional, upon conviction, additional criminal penalties may be applicable, as provided by under 19 U.S.C. 1459, in addition to other penalties applicable under other provisions of law.</P> <CITA>[T.D. 93-96, 58 FR 67317, Dec. 21, 1993; 59 FR 1918, Jan. 13, 1994]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Foreign Clearances</HD> <SECTION> <SECTNO>§ 4.60</SECTNO> <SUBJECT>Vessels required to clear.</SUBJECT> <P>(a) Unless specifically excepted by law, the following vessels must obtain <PRTPAGE P="45"/>clearance from the Customs Service before departing from a port or place in the United States:</P> <P>(1) All vessels departing for a foreign port or place;</P> <P>(2) All foreign vessels departing for another port or place in the United States;</P> <P>(3) All American vessels departing for another port or place in the United States that have merchandise on board that is being transported in-bond (not including bonded ship's stores or supplies), or foreign merchandise for which entry has not been made; and</P> <P>(4) All vessels departing for points outside the territorial sea to visit a hovering vessel or to receive merchandise or passengers while outside the territorial sea, as well as foreign vessels delivering merchandise or passengers while outside the territorial sea.</P> <P>(b) The following vessels are not required to clear:</P> <P>(1) A documented vessel with a pleasure license endorsement or an undocumented American pleasure vessel (i.e., an undocumented vessel wholly owned by a United States citizen or citizens, whether or not it has a certificate of number issued by the State in which the vessel is principally used under 46 U.S.C. 1466-1467 and not engaged in trade nor violating the Customs or navigation laws of the United States and not having visited any hovering vessel (see 19 U.S.C. 1709(d)).</P> <P>(2) Any documented vessel with a Great Lakes license endorsement which during a voyage on the Great Lakes will touch at a foreign port only for taking on bunker fuel. (see § 4.82).</P> <P>(3) A vessel exempted from entry by section 441, Tariff Act of 1930. (See § 4.5.)</P> <P>(4) A vessel of less than 5 net tons which departs from the United States to proceed to a contiguous country otherwise than by sea.</P> <P>(c) Vessels which will merely transit the Panama Canal without transacting any business there shall not be required to be cleared because of such transit.</P> <P>(d) In the event that departure is delayed beyond the second day after clearance, the delay shall be reported within 72 hours after clearance to the port director who shall note the fact of detention on the certificate of clearance and on the official record of clearance. When the proposed voyage is canceled after clearance, the reason therefor shall be reported in writing within 24 hours after such cancellation and the certificate of clearance and related papers shall be surrendered.</P> <P>(e) No vessel shall be cleared for the high seas <E T="03">except,</E> a vessel bound to another vessel on the high seas to—</P> <P>(1) Transship export merchandise which it has transported from the U.S. to the vessel on the high seas; or</P> <P>(2) Receive import merchandise from the vessel on the high seas and transport the merchandise to the U.S.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 79-276, 44 FR 61956, Oct. 29, 1979; T.D. 83-214, 48 FR 46512, Oct. 13, 1983; T.D. 85-91, 50 FR 21429, May 24, 1985; T.D. 94-24, 59 FR 13200, Mar. 21, 1994; T.D. 95-77, 60 FR 50010, Sept. 27, 1995; T.D. 00-4, 65 FR 2873, Jan. 19, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.61</SECTNO> <SUBJECT>Requirements for clearance.</SUBJECT> <P>(a) <E T="03">Application for clearance.</E> A clearance application for a vessel intending to depart for a foreign port must be made by filing Customs Form 1300 (Vessel Entrance or Clearance Statement) executed by the vessel master or other proper officer. The master, licensed deck officer, or purser may appear in person to clear the vessel, or the properly executed Customs Form 1300 may be delivered to the customhouse by the vessel agent or other personal representative of the master. Necessary information may also be transmitted electronically pursuant to a system authorized by Customs. Clearance will be granted by Customs either on the Customs Form 1300 or by approved electronic means. Customs port directors may permit the clearance of vessels at locations other than the customhouse, and at times outside of normal business hours. Customs may take local resources into consideration in allowing clearance to be transacted on board vessels themselves or at other mutually convenient sites and times either within or outside of port limits. Customs must be satisfied that the place designated for clearance is sufficiently under Customs control at the <PRTPAGE P="46"/>time of clearance, and that the expenses incurred by Customs will be reimbursed as authorized. Customs may require that advance notice of vessel departure be given prior to granting requests for optional clearance locations.</P> <P>(b) <E T="03">When clearance required.</E> Under certain circumstances, American vessels departing from ports of the United States directly for other United States ports must obtain Customs clearance. The clearance of such vessels is required when they have merchandise aboard which is being transported in-bond, or when they have unentered foreign merchandise aboard. For the purposes of the vessel clearance requirements, merchandise transported in-bond does not include bonded ship's stores or supplies. While American vessels transporting unentered foreign merchandise must fully comply with usual clearance procedures, American vessels carrying no unentered foreign merchandise but that have in-bond merchandise aboard may satisfy vessel clearance requirements by reporting intended departure within 72 hours prior thereto by any means of communication that is satisfactory to the local Customs port director, and by presenting a completed Customs Form 1300 (Vessel Entrance or Clearance Statement). Also, the Customs officer may require the production of any documents or papers deemed necessary for the proper inspection/examination of the vessel, cargo, passenger, or crew. Report of departure together with providing information to Customs as specified in this paragraph satisfies all clearance requirements for the subject vessels.</P> <P>(c) <E T="03">Verification of compliance.</E> Before clearance is granted to a vessel bound to a foreign port as provided in § 4.60 and this section, the port director will verify compliance with respect to the following matters:</P> <P>(1) Accounting for inward cargo (see § 4.62).</P> <P>(2) Outward Cargo Declarations; shippers export declarations (see § 4.63).</P> <P>(3) Documentation (see § 4.0(c)).</P> <P>(4) Verification of nationality and tonnage (see § 4.65).</P> <P>(5) Verification of inspection (see § 4.66).</P> <P>(6) Inspection under State laws (46 U.S.C. App. 97).</P> <P>(7) Closed ports or places (see § 4.67).</P> <P>(8) Passengers (see § 4.68).</P> <P>(9) Shipping articles and enforcement of Seamen's Act (see § 4.69).</P> <P>(10) Medicine and slop chests.</P> <P>(11) Load line regulations (see § 4.65a).</P> <P>(12) Carriage of United States securities, etc. (46 U.S.C. App. 98).</P> <P>(13) Carriage of mail.</P> <P>(14) Public Health regulations (see § 4.70).</P> <P>(15) Inspection of vessels carrying livestock (see § 4.71).</P> <P>(16) Inspection of meat, meat-food products, and inedible fats (see§ 4.72).</P> <P>(17) Neutrality exportation of arms and munitions (see § 4.73).</P> <P>(18) Payment of State and Federal fees and fees due the Government of the Virgin Islands of the United States (46 U.S.C. App. 100).</P> <P>(19) Orders restricting shipping (see § 4.74).</P> <P>(20) Estimated duties deposited or a bond given to cover duties on foreign repairs and equipment for vessels of the United States (see § 4.14).</P> <P>(21) Illegal discharge of oil (see § 4.66a).</P> <P>(22) Attached or arrested vessel.</P> <P>(23) Immigration laws.</P> <P>(24) Electronic receipt of required vessel cargo information (see § 192.14(c) of this chapter).</P> <P>(d) <E T="03">Vessel built for foreign account.</E> A new vessel built in the United States for foreign account will be cleared under a certificate of record, Coast Guard Form 1316, in lieu of a marine document.</P> <P>(e) <E T="03">Clearance not granted.</E> Clearance will not be granted to any foreign vessel using the flag of the United States or any distinctive signs or markings indicating that the vessel is an American vessel (22 U.S.C. 454a).</P> <P>(f) <E T="03">Clearance in order of itinerary.</E> Unless otherwise provided in this section, every vessel bound for a foreign port or ports will be cleared for a definite port or ports in the order of its itinerary, but an application to clear for a port or place for orders, that is, for instructions to masters as to destination of the vessel, may be accepted if the vessel is in ballast or if any cargo on board is to be discharged in a port of <PRTPAGE P="47"/>the same country as the port for which clearance is sought.</P> <CITA>[T.D. 00-4, 65 FR 2874, Jan. 19, 2000; T.D. 00-22, 65 FR 16515, Mar. 29, 2000; CBP Dec. 03-32, 68 FR 68169, Dec. 5, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.62</SECTNO> <SUBJECT>Accounting for inward cargo.</SUBJECT> <P>Inward cargo discrepancies shall be accounted for and adjusted by correction of the Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A, but the vessel may be cleared and the adjustment deferred if the discharging officer's report has not been received. (See § 4.12.)</P> <CITA>[T.D. 77-255, 42 FR 56322, Oct. 25, 1977, as amended by T.D. 84-193, 49 FR 35485, Sept. 10, 1984]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.63</SECTNO> <SUBJECT>Outward cargo declaration; shippers' export declarations.</SUBJECT> <P>(a) No vessel shall be cleared directly for a foreign port, or for a foreign port by way of another domestic port or other domestic ports (see § 4.87(b)), unless there has been filed with the appropriate Customs officer at the port from which clearance is being sought:</P> <P>(1) A Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A. Copies of bills of lading or equivalent commercial documents relating to all cargo encompassed by the manifest must be attached in such manner as to constitute one document, together with a Vessel Entrance or Clearance Statement, Customs Form 1300, and export declarations as are required by pertinent regulations of the Bureau of the Census, Department of Commerce; or</P> <P>(2) An incomplete Cargo Declaration as provided for in § 4.75.</P> <P>(b) Except as hereafter stated, the number of the export declaration covering each shipment for which an authenticated export declaration is required shall be shown on the Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A, in the marginal column headed “B/L No.” If an export declaration is not required for a shipment, a notation shall be made on the Cargo Declaration Outward With Commercial Forms (Customs Form 1302-A) describing the basis for the exemption with a reference to the number of the section in the Census Regulations (see 15 CFR 30.39, 30.50 through 30.57) where the particular exemption is provided. If shipments are exempt on the basis of value and destination, the appearance of the value and destination on a bill of lading or other commercial documents is acceptable as evidence of the exemption and reference to the applicable section in the Census Regulations is not required.</P> <P>(c) The following minimal information shall be included on the Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A (other information required to be on a Customs Form 1302-A as shown on the form itself must also be included thereon) or on attached copies of bills of lading or equivalent commercial documents:</P> <P>(1) Name and address of shipper;</P> <P>(2) Description of the cargo (see paragraph (d) of this section);</P> <P>(3) Number of packages and gross weight (see paragraph (d) of this section);</P> <P>(4) Name of vessel or carrier;</P> <P>(5) Port of exit (this shall be the port where the merchandise is loaded on the vessel); and</P> <P>(6) Port of destination (this shall be the foreign port of discharge of the merchandise).</P> <P>(d) If the bills of lading or equivalent commercial documents attached to the Customs Form 1302-A show on their face the cargo information required by columns 6, 7, and either column 8 or 9, of the Customs Form 1302-A, that information need not be shown again on the Customs Form 1302-A. However, in that case, the cargo information must be incorporated by a suitable reference on the face of the Customs Form 1302-A such as “Cargo as per attached commercial documents.”</P> <P>(e) For each shipment to be exported under an entry or withdrawal for exportation or for transportation and exportation, the Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A, or commercial document attached to the Cargo Declaration and made a part thereof in accordance with paragraph (a)(1) of this section, shall clearly show for such shipment the number, date, and class of such Customs entry or withdrawal (i.e., T. & E., Wd. T. & E., I. E., Wd. Ex., or Wd. T., as applicable) and the name of <PRTPAGE P="48"/>the port where the merchandise is laden for exportation.</P> <P>(f) Customs officers shall accept a Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A, covering containerized or palletized cargo which indicates by the use of appropriate words of qualification (see § 4.7a(c)(3)) that the declaration has been prepared on the basis of information furnished by the shipper.</P> <CITA>[T.D. 84-193, 49 FR 35484, Sept. 10, 1984; T.D. 00-22, 65 FR 16515, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.64</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 4.65</SECTNO> <SUBJECT>Verification of nationality and tonnage.</SUBJECT> <P>The nationality and tonnage of a vessel shall be verified by examination of its marine document. If such examination discloses that insufficient tonnage tax was collected on entry of the vessel, no clearance shall be granted until the deficiency is paid.</P> </SECTION> <SECTION> <SECTNO>§ 4.65a</SECTNO> <SUBJECT>Load lines.</SUBJECT> <P>(a) If a port director is notified by an officer of the United States Coast Guard that a detention order has been issued against a vessel engaged in the foreign trade under the International Voyage Load Line Act of 1973, clearance shall not be granted until the order is withdrawn.</P> <P>(b) If a port director issues a detention order under the Coastwise Load Line Act, 1935, as amended, or is notified by an officer of the United States Coast Guard that a detention order has been issued against a vessel under the aforesaid Act, clearance shall not be granted until the order is withdrawn.</P> <CITA>[T.D. 75-133, 40 FR 24518, June 9, 1975]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.66</SECTNO> <SUBJECT>Verification of inspection.</SUBJECT> <P>(a) No clearance shall be granted unless the port director is satisfied that a proper certificate of inspection is in force and the vessel is in compliance with such certificate, if the vessel is:</P> <P>(1) A vessel of the United States required to be inspected as specified in Title 46, Code of Federal Regulations.</P> <P>(2) A foreign vessel carrying passengers from the United States.</P> <P>(b) In the case of vessels of foreign nations which are signatories of the International Convention for the Safety of Life at Sea, 1948, carrying passengers from the United States, an unexpired Certificate of Examination for Foreign Passenger Vessel, Form CG-989, or an unexpired Certificate for Foreign Vessel to Carry Persons in Addition to Crew, Form CG-3463, issued by the United States Coast Guard, may be accepted as evidence that a proper certificate of inspection is in force and the vessel is in compliance with such certificate.</P> <P>(c) In the case of vessels of the United States subject to inspection proceeding to another port for repairs, a valid Permit to Proceed to Another Port for Repairs, Form CG-948, issued by the United States Coast Guard, shall be accepted in lieu of the certificate of inspection required by this section.</P> <CITA>[T.D. 56173, 29 FR 6681, May 22, 1964, as amended by T.D. 69-266, 34 FR 20422, Dec. 31, 1969]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.66a</SECTNO> <SUBJECT>Illegal discharge of oil and hazardous substances.</SUBJECT> <P>If a port director receives a request from an officer of the U.S. Coast Guard to withhold clearance of a vessel whose owner or operator is subject to a civil penalty for discharging oil or a hazardous substance into or upon the navigable waters of the United States, adjoining shorelines, or into or upon the waters of the contiguous zone in quantities determined to be harmful by appropriate authorities, such clearance shall not be granted until the port director is informed that a bond or other surety satisfactory to the Coast Guard has been filed.</P> <CITA>[T.D. 82-28, 47 FR 5226, Feb. 4, 1982]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.66b</SECTNO> <SUBJECT>Pollution of coastal and navigable waters.</SUBJECT> <P>(a) If any Customs officer has reason to believe that any refuse matter is being or has been deposited in navigable waters or any tributary of any navigable waters in violation of section 13 of the Act of March 3, 1899 (30 Stat. 1152; 33 U.S.C. 407), or oil or a hazardous substance is being or has been discharged into or upon the navigable waters of the United States, adjoining shorelines, or into or upon the waters of the contiguous zone in violation of <PRTPAGE P="49"/>the Federal Water Pollution Control Act, as amended (33 U.S.C. 1251, 1321), he shall promptly furnish to the port director a full report of the incident, together with the names of witnesses and, when practicable, a sample of the material discharged from the vessel in question.</P> <P>(b) The port director shall forward this report immediately, without recommendation, to the district commander of the Coast Guard district concerned and a copy of such report shall be furnished to Headquarters, U.S. Customs Service.</P> <CITA>[T.D. 73-18, 38 FR 1587, Jan. 16, 1973, as amended by T.D. 82-28, 47 FR 5226, Feb. 4, 1982]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.66c</SECTNO> <SUBJECT>Oil pollution by oceangoing vessels.</SUBJECT> <P>(a) If a port director receives a request from a Coast Guard officer to refuse or revoke the clearance or permit to proceed of a vessel because the vessel, its owner, operator, or person in charge, is liable for a fine or civil penalty, or reasonable cause exists to believe that they may be subject to a fine or civil penalty under the provisions of 33 U.S.C. 1908 for violating the Protocol of 1978 Relating to the International Convention for the Prevention of Pollution from Ships, 1973 (MARPOL Protocol), the Act to Prevent Pollution from Ships, 1980 (33 U.S.C. 1901-1911), or regulations issued thereunder, such clearance or a permit to proceed shall be refused or revoked. Clearance or a permit to proceed may be granted when the port director is informed that a bond or other security satisfactory to the Coast Guard has been filed.</P> <P>(b) If a port director receives a notification from a Coast Guard officer that an order has been issued to detain a vessel required to have an International Oil Pollution Prevention (IOPP) Certificate which does not have a valid certificate on board, or whose condition or whose equipment's condition does not substantially agree with the particulars of the certificate on board, or which presents an unreasonable threat of harm to the marine environment, the port director shall refuse or revoke the clearance or permit to proceed of the vessel if requested to do so by a Coast Guard officer. The port director shall not grant clearance or issue a permit to proceed to the vessel until notified by a Coast Guard officer that detention of the vessel is no longer required.</P> <P>(c) If a port director receives a notification from a Coast Guard officer to detain a vessel operated under the authority of a country not a party to the MARPOL Protocol which does not have a valid certificate on board showing that the vessel has been surveyed in accordance with and complies with the requirements of the MARPOL Protocol, or whose condition or whose equipment's condition does not substantially agree with the particulars of the certificate on board, or which presents an unreasonable threat of harm to the marine environment, the port director shall refuse or revoke the clearance or permit to proceed of the vessel if requested to do so by a Coast Guard officer. The port director shall not grant clearance or issue a permit to proceed to the vessel until notified by a Coast Guard officer that detention of the vessel is no longer required.</P> <CITA>[T.D. 81-148, 49 FR 28695, July 16, 1984]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.67</SECTNO> <SUBJECT>Closed ports or places.</SUBJECT> <P>No foreign vessel shall be granted a clearance or permit to proceed to any port or place from which such vessels are excluded by orders or regulations of the United States Navy Department except with the prior approval of that Department.</P> </SECTION> <SECTION> <SECTNO>§ 4.68</SECTNO> <SUBJECT>Federal Maritime Commission certificates for certain passenger vessels.</SUBJECT> <P>No vessel having berth or stateroom accommodations for 50 or more passengers and embarking passengers at U.S. ports will be granted a clearance at the port or place of departure from the United States unless it is established that the vessel has valid certificates issued by the Federal Maritime Commission.</P> <CITA>[T.D. 00-4, 65 FR 2874, Jan. 19, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.69</SECTNO> <SUBJECT>Shipping articles.</SUBJECT> <P>No vessel of the U.S. on a voyage between a U.S. port and a foreign port (except a port in Canada, Mexico, or the West Indies), or if of at least 75 <PRTPAGE P="50"/>gross tons, on a voyage between a U.S. port on the Atlantic Ocean and a U.S. port on the Pacific Ocean, shall be granted clearance before presentation, to the appropriate Customs officer, of the shipping articles agreements, including any seaman's allotment agreement, required by 46 U.S.C. chapter 103, in the form provided for in 46 CFR 14.05-1.</P> <CITA>[T.D. 92-52, 57 FR 23945, June 5, 1992]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.70</SECTNO> <SUBJECT>Public Health Service requirements.</SUBJECT> <P>No clearance will be granted to a vessel subject to the foreign quarantine regulations of the Public Health Service.</P> <CITA>[T.D. 00-4, 65 FR 2874, Jan. 19, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.71</SECTNO> <SUBJECT>Inspection of livestock.</SUBJECT> <P>A proper export inspection certificate issued by the Veterinary Services, Animal and Plant Health Inspection Service, Department of Agriculture, shall be filed before the clearance of a vessel carrying horses, mules, asses, cattle, sheep, swine, or goats (9 CFR part 91)</P> <CITA>[T.D. 79-32, 44 FR 5650, Jan. 29, 1979]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.72</SECTNO> <SUBJECT>Inspection of meat, meat-food products, and inedible fats.</SUBJECT> <P>(a) No clearance shall be granted to any vessel carrying meat or meat-food products, as defined and classified by the U.S. Department of Agriculture, Food Safety and Inspection Service, Meat and Poultry Inspection until there have been filed with the port director such copies of export certificates concerning such meat or meat-food products as are required by the pertinent regulations of the U.S. Department of Agriculture, Food Safety and Inspection Service, Meat and Poultry Inspection (9 CFR part 322). If such certificate has been obtained but is unavailable at the scheduled time of a vessel's departure, the vessel may be cleared on the basis of the receipt of a statement, under the shipper's or shipper's agent's letterhead, certifying the number of boxes, the number of pounds, the product name and the U.S. Department of Agriculture export certificate number that covers the shipment of the product. If such statement has been used as the basis for obtaining vessel clearance, the duplicate of the certificate must be filed with Customs within the time period prescribed by § 4.75.</P> <P>(b) No clearance shall be granted to any vessel carrying tallow, stearin, oleo oil, or other rendered fat derived from cattle, sheep, swine, or goats for export from the United States, which has not been inspected, passed, and marked by the United States Department of Agriculture, unless the port director is furnished with a certificate by the exporter that the article is inedible.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 78-99, 43 FR 13059, Mar. 29, 1978; T.D. 91-77, 56 FR 46114, Sept. 10, 1991;T.D. 95-54, 60 FR 35838, July 12, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.73</SECTNO> <SUBJECT>Neutrality; exportation of arms and munitions.</SUBJECT> <P>(a) Clearance shall not be granted to any vessel if the port director has reason to believe that her departure or intended voyage would be in violation of any provision of the Neutrality Act of 1939 or other neutrality law of the United States, <SU>104</SU> <FTREF/> or of any regulation or instruction issued pursuant to any such law.</P> <FTNT> <P> <SU>104</SU> See 18 U.S.C. 961 through 967 and 22 U.S.C. 441 through 457.</P> </FTNT> <P>(b) The port director shall refuse clearance for and detain any vessel manifestly built for warlike purposes and about to depart from the United States with a cargo consisting principally of arms and munitions of war <SU>105</SU> <FTREF/> when the number of men intending to sail or other circumstances render it probable that the vessel is intended to commit hostilities against the subjects, citizens, or property or any foreign country, with which the United States is at peace, until the decision of the President thereon is received, or until the owners shall have given bond or security in double the value of the vessel and its cargo that she will not be so employed.</P> <FTNT> <P> <SU>105</SU> Clearance for vessel shall not be denied for the sole reason that her cargo contains contraband of war.</P> <P> <E T="51">106-110</E> [Reserved]</P> </FTNT> <P>(c) A port director shall promptly communicate all the facts to Headquarters, U.S. Customs Service, if he <PRTPAGE P="51"/>learns while the United States is at peace that any vessel of a belligerent power which has arrived as a merchant vessel is altering, or will attempt to alter, her status as a merchant vessel so as to become an armed vessel or an auxiliary to armed vessels of a foreign power.</P> <P>(d) If a port director has reason to believe during the existence of a war to which the United States is not a party that any vessel at his port is about to carry arms, munitions, supplies, dispatches, information, or men to any warship or tender or supply ship of a belligerent nation, he shall withhold the clearance of such vessel and report the facts promptly to Headquarters, U.S. Customs Service.</P> </SECTION> <SECTION> <SECTNO>§ 4.74</SECTNO> <SUBJECT>Transportation orders.</SUBJECT> <P>Clearance shall not be granted to any vessel if the port director has reason to believe that her departure or intended voyage would be in violation of any provision of any transportation order, regulation, or restriction issued under authority of the Defense Production Act of 1950 (50 U.S.C. App. 2061-2066).</P> </SECTION> <SECTION> <SECTNO>§ 4.75</SECTNO> <SUBJECT>Incomplete manifest; incomplete export declarations; bond.</SUBJECT> <P>(a) <E T="03">Pro forma manifest.</E> Except as provided for in § 4.75(c), if a master desiring to clear his vessel for a foreign port does not have available for filing with the port director a complete Cargo Declaration Outward with Commercial Forms, Customs Form 1302-A (see § 4.63) in accordance with 46 U.S.C. 91, or all required shipper's export declarations (see 15 CFR 30.24), the port director may accept in lieu thereof an incomplete manifest (referred to as a pro forma manifest) on the Vessel Entrance or Clearance Statement, Customs Form 1300, if there is on file in his office a bond on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter relating to international carriers, executed by the vessel owner or other person as attorney in fact of the vessel owner. The “Incomplete Manifest for Export” box in item 17 of the Vessel Entrance or Clearance Statement form must be checked.</P> <P>(b) <E T="03">Time in which to file complete manifest and export declarations.</E> Not later than the fourth business day after clearance from each port in the vessel's itinerary, the master, or the vessel's agent on behalf of the master, shall deliver to the director of each port a complete Cargo Declaration Outward with Commercial Forms, Customs Form 1302-A, in accordance with § 4.63, of the cargo laden at such port together with duplicate copies of all required shipper's export declarations for such cargo and a Vessel Entrance or Clearance Statement, Customs Form 1300. The statutory grace period of 4 days for filing the complete manifest and missing export declarations begins to run on the first day (exclusive of any day on which the customhouse is not open for marine business) following the date on which clearance is granted.</P> <P>(c) <E T="03">Countries for which vessels may not be cleared until complete manifests and shipper's export declarations are filed.</E> To aid the Customs Service in the enforcement of export laws and regulations, no vessel shall be cleared for any port in the following countries until a complete outward foreign manifest and all required shipper's export declarations have been filed with the port director: </P> <EXTRACT> <SCOL2> <LI>Albania</LI> <LI>Bulgaria</LI> <LI>Cambodia</LI> <LI>China, People's Republic of </LI> <LI>Cuba</LI> <LI>Czechoslovakia</LI> <LI>Estonia</LI> <LI>German Democratic Republic (Soviet Zone of Germany and Soviet Zone sector of Berlin)</LI> <LI>Hungary</LI> <LI>Iran</LI> <LI>Iraq</LI> <LI>Laos</LI> <LI>Latvia</LI> <LI>Libya</LI> <LI>Lithuania</LI> <LI>Mongolian People's Republic</LI> <LI>North Korea</LI> <LI>Polish People's Republic (Including Danzig)</LI> <LI>Rumania</LI> <LI>South Yemen</LI> <LI>Union of Soviet Socialist Republics</LI> <LI>Viet Nam</LI> </SCOL2> </EXTRACT> <CITA>[T.D. 87-1, 52 FR 255, Jan. 5, 1987, as amended by T.D. 91-60, 56 FR 32085, July 15, 1991; T.D. 00-22, 65 FR 16515, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.76</SECTNO> <SUBJECT>Procedures and responsibilities of carriers filing outbound vessel manifest information via the AES.</SUBJECT> <P>(a) <E T="03">The sea carrier's module.</E> The Sea Carrier's Module is a component of the Automated Export System (AES) (<E T="03">see,</E> part 192, subpart B, of this chapter) that allows for the filing of outbound <PRTPAGE P="52"/>vessel manifest information electronically (<E T="03">see,</E> 15 CFR part 30). All sea carriers are eligible to apply for participation in the Sea Carrier's Module. Application and certification procedures for AES are found at 15 CFR 30.60. A sea carrier certified to use the module that adheres to the procedures set forth in this section and the Census Regulations (15 CFR part 30) concerning the electronic submission of an outbound vessel manifest information meets the outward cargo declaration filing requirements (CF 1302-A) of §§ 4.63 and 4.75, except as otherwise provided in §§ 4.75 and 4.84.</P> <P>(b) <E T="03">Responsibilities.</E> The performance requirements and operational standards and procedures for electronic submission of outbound vessel manifest information are detailed in the AES Trade Interface Requirements handbook (available on the Customs internet web site (www.customs.gov)). Carriers and their agents are responsible for reporting accurate and timely information and for responding to all notifications concerning the status of their transmissions and the detention and release of freight in accordance with the procedures set forth in the AES Trade Interface Requirements handbook. Customs will send messages to participant carriers regarding the accuracy of their transmissions. AES participants are required to comply with the recordkeeping requirements contained at § 30.66 of the Census Regulations (15 CFR 30.66) and any other applicable recordkeeping requirements. Where paper SEDs have been submitted by exporters prior to departure, participant carriers will be responsible for submitting those SEDs to Customs within four (4) business days after the departure of the vessel from each port, unless a different time requirement is specified by §§ 4.75 or 4.84. Upon written agreement with participant sea carriers, Customs and Census can provide for an alternative to the location filing requirement for paper SEDs set forth in § 4.75(b) by which the participant carriers are otherwise bound.</P> <P>(c) <E T="03">Messages required to be filed within the sea carrier's module.</E> Participant carriers will be responsible for transmitting and responding to the following messages:</P> <P>(1) <E T="03">Booking.</E> Booking information identifies all the freight that is scheduled for export. Booking information will be transmitted to Customs via AES for each shipment as far in advance of departure as practical, but no later than seventy-two hours prior to departure for all information available at that time. Bookings received within seventy-two hours of departure will be transmitted to Customs via AES as received;</P> <P>(2) <E T="03">Receipt of booking.</E> When the carrier receives the cargo or portion of the cargo that was booked, the carrier will inform Customs so that Customs can determine if an examination of the cargo is necessary. Customs will notify the carrier of shipments designated for examination. Customs will also notify the carrier when the shipment designated for inspection is released and may be loaded on the vessel;</P> <P>(3) <E T="03">Departure.</E> No later than the first calendar day following the actual departure of the vessel, the carrier will notify Customs of the date and time of departure; and</P> <P>(4) <E T="03">Manifest.</E> Within ten (10) calendar days after the departure of the vessel from each port, the carrier will submit the manifest information to Customs via AES for each booking loaded on the departed vessel. However, if the destination of the vessel is a foreign port listed in § 4.75(c), the carrier must transmit complete manifest information before vessel departure. Time requirements for transmission of complete manifest information for carriers destined to Puerto Rico and U.S. possessions are the same as the requirement for the submission of the complete manifest as found in § 4.84.</P> <P>(d) All penalties and liquidated damages that apply to the submission of paper manifests (<E T="03">see,</E> applicable provisions in this part) apply to the electronic submission of outbound vessel manifest information through the Sea Carrier's Module.</P> <CITA>[T.D. 99-57, 64 FR 40986, July 28, 1999]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Coastwise Procedure</HD> <SECTION> <SECTNO>§ 4.80</SECTNO> <SUBJECT>Vessels entitled to engage in coastwise trade.</SUBJECT> <P>(a) No vessel shall transport, either directly or by way of a foreign port, <PRTPAGE P="53"/>any passenger or merchandise between points in the United States embraced within the coastwise laws, including points within a harbor, or merchandise for any part of the transportation between such points, unless it is:</P> <P>(1) Owned by a citizen and is so documented under the laws of the United States as to permit it to engage in the coastwise trade;</P> <P>(2) Owned by a citizen, is exempt from documentation, and is entitled to or, except for its tonnage, would be entitled to be documented with a coastwise license or, where appropriate, a Great Lakes license endorsement.</P> <P>(3) Owned by a partnership or association in which at least a 75 percent interest is owned by such a citizen, is exempt from documentation and is entitled to or, except for its tonnage, or citizenship of its owner, or both, would be entitled to be documented for the coastwise trade. The term “citizen” for vessel documentation purposes, whether for an individual, partnership, or corporation owner, is defined in 46 CFR 67.3.</P> <P>(b) <E T="03">Penalties for violating coastwise laws.</E> (1) The penalty imposed for the illegal transportation of merchandise between coastwise points is forfeiture of the merchandise or, in the discretion of the port director, forfeiture of a monetary amount up to the value of the merchandise to be recovered from the consignor, seller, owner, importer, consignee, agent, or other person or persons so transporting or causing the merchandise to be transported (46 U.S.C. 883).</P> <P>(2) The penalty imposed for the unlawful transportation of passengers between coastwise points is $300 for each passenger so transported and landed(46 U.S.C. App. 289, as adjusted by the Federal Civil Penalties Inflation Adjustment Act of 1990).</P> <P>(c) Any vessel of the United States, whether or not entitled under paragraph (a) of this section to engage in the coastwise trade, and any foreign vessel may proceed between points in the United States embraced within the coastwise laws to discharge cargo or passengers laden at a foreign port, to lade cargo or passengers for a foreign port, in ballast, or to transport certain articles in accordance with § 4.93. Cargo laden at a foreign port may be retained onboard during such movements. Furthermore, certain barges of United States or foreign flag may transport transferred merchandise between points in the United States embraced within the coastwise laws, excluding transportation between the continental United States and a noncontiguous point in the United States embraced within the coastwise laws, in accordance with § 4.81a.</P> <P>(d) No vessel owned by a corporation which is a citizen of the United States under the Act of September 2, 1958 (46 U.S.C. 883-1) shall be used in any trade other than the coastwise trade and shall not be used in that trade unless it is properly documented for such use or is exempt from documentation and is entitled to or, except for its tonnage, would be entitled to a coastwise license, or where appropriate, a Great Lakes license endorsement. Such a vessel shall not be documented for nor engage in the foreign trade or the fisheries and shall not transport merchandise or passengers coastwise for hire except as a service for a parent or a subsidiary corporation as defined in the aforesaid Act or while under demise or bareboat charter at prevailing rates for use otherwise than in trade with noncontiguous territory of the United States to a common or contract carrier subject to Part III of the Interstate Commerce Act, as amended (49 U.S.C. 901 through 923), which otherwise qualifies as a citizen of the United States under section 2 of the Shipping Act, 1916, as amended (46 U.S.C. 802), and which is not connected, directly or indirectly, by way of ownership or control with such owning corporation.</P> <P>(e) No vessel which has acquired the lawful right to engage in the coastwise trade, by virtue of having been built in or documented under the laws of the United States, shall have the right to engage in such trade if it thereafter has been sold or transferred foreign in whole or in part or placed under foreign registry, or, if of more than 500 gross tons, has been rebuilt unless the entire rebuilding, including the construction of any major components of the hull or superstructure of the vessel, was effected within the United States, <PRTPAGE P="54"/>its Territories (not including trust territories), or its possessions. However, no rebuilt vessel shall be deemed to have lost its coastwise privileges within the meaning of the above if rebuilt within the United States, its Territories (not including trust territories), or its possessions under a contract executed before July 5, 1960, if the work of rebuilding commenced not later than 24 months after such date.</P> <P>(f) No foreign-built vessel owned and documented as a vessel of the United States prior to February 1, 1920, by a citizen nor one owned by the United States on June 5, 1920, and sold to and owned by a citizen, shall engage in the American fisheries, but it is otherwise unlimited as to trade so long as it continues in such ownership (section 22, Merchant Marine Act, of June 5, 1920; 46 U.S.C. 13). No foreign-built vessel which is owned by a citizen, but which was not so owned and documented on February 1, 1920, or which was not owned by the United States on June 5, 1920, shall engage in the coastwise trade or the American fisheries. No foreign-built vessel which has been sold, leased, or chartered by the Secretary of Commerce to any citizen, shall engage in the American fisheries, but it is otherwise unlimited as to trade so long as it continues in such ownership, lease, or charter (section 9 of the Act of Sept. 7, 1916, as amended, 46 U.S.C. 808). A vessel engaged in taking out fishing parties for hire, unless it intends to proceed to a foreign port, is considered to be engaged in the coastwise trade and not the fisheries.</P> <P>(g) Certain vessels not documented under the laws of the United States which are acquired by or made avail-able to the Secretary of Commerce may be documented under section 3 of the Act of August 9, 1954 (50 U.S.C. 198). Such vessels shall not engage in the coastwise trade unless in possession of a valid unexpired permit to engage in that trade issued by the Secretary of Commerce under authority of section 3(c) of the said Act.</P> <P>(h) A vessel which is at least 50 percent owned by a citizen as defined in 46 CFR subpart 68.05, and which, except for citizenship requirements, is otherwise entitled to be documented with a coastwise endorsement, may be documented with a limited coastwise endorsement, provided the vessel is owned by a not-for-profit oil spill response cooperative or by one or more members of such a cooperative who dedicate the vessel to the use of the cooperative (46 U.S.C. 12106(d)). Notwithstanding 46 U.S.C. App. 883, a vessel may be documented with such a limited endorsement even if formerly owned by a not-for-profit oil spill response cooperative or by one or more members thereof, as long as the citizenship criteria of 46 CFR subpart 68.05 are met. A vessel so documented may operate on the navigable waters of the United States or in the Exclusive Economic Zone only for the purpose of training for oil spill cleanup operations; deploying equipment, supplies and personnel for cleanup operations; and recovering and/or transporting oil discharged in a spill. Such vessel may also engage in any other employment for which a registry, fishery, or Great Lakes endorsement is not required, and may qualify to operate for other purposes by meeting the applicable requirements of 46 CFR part 67.</P> <P>(i) Any vessel, entitled to be documented and not so documented, employed in a trade for which a Certificate of Documentation is issued under the vessel documentation laws (see § 4.0(c)), other than a trade covered by a registry, is liable to a civil penalty of $500 for each port at which it arrives without the proper Certificate of Documentation. If such a vessel has on board any foreign merchandise (sea stores excepted), or any domestic taxable alcoholic beverages, on which the duty and taxes have not been paid or secured to be paid, the vessel and its cargo are subject to seizure and forfeiture.</P> <CITA>[T.D. 69-266, 34 FR 20422, Dec. 31, 1969, as amended by T.D. 79-160, 44 FR 31956, June 4, 1979; T.D. 83-214, 48 FR 46512, Oct. 13, 1983; T.D. 93-78, 58 FR 50257, Sept. 27, 1993; T.D. 97-82, 62 FR 51769, Oct. 3, 1997; T.D. 03-11, 68 FR 13820, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.80a</SECTNO> <SUBJECT>Coastwise transportation of passengers.</SUBJECT> <P>(a) For the purposes of this section, the following terms will have the meaning set forth below:<PRTPAGE P="55"/> </P> <P>(1) <E T="03">Coastwise port</E> means a port in the U.S., its territories, or possessions embraced within the coastwise laws.</P> <P>(2) <E T="03">Nearby foreign port</E> means any foreign port in North America, Central America, the Bermuda Islands, or the West Indies (including the Bahama Islands, but not including the Leeward Islands of the Netherlands Antilles, i.e., Aruba, Bonaire, and Curacao). A port in the U.S. Virgin Islands shall be treated as a nearby foreign port.</P> <P>(3) <E T="03">Distant foreign port</E> means any foreign port that is not a nearby port.</P> <P>(4) <E T="03">Embark</E> means a passenger boarding a vessel for the duration of a specific voyage and <E T="03">disembark</E> means a passenger leaving a vessel at the conclusion of a specific voyage. The terms <E T="03">embark</E> and <E T="03">disembark</E> are not applicable to a passenger going ashore temporarily at a coastwise port who reboards the vessel and departs with it on sailing from the port.</P> <P>(5) <E T="03">Passenger</E> has the meaning defined in § 4.50(b).</P> <P>(b) The applicability of the coastwise law (46 U.S.C. 289) to a vessel not qualified to engage in the coastwise trade (i.e., either a foreign-flag vessel or a U.S.-flag vessel that is foreign-built or at one time has been under foreign-flag) which embarks a passenger at a coastwise port is as follows:</P> <P>(1) If the passenger is on a voyage solely to one or more coastwise ports and the passenger disembarks or goes ashore temporarily at a coastwise port, there is a violation of the coastwise law.</P> <P>(2) If the passenger is on a voyage to one or more coastwise ports and a nearby foreign port or ports (but at no other foreign port) and the passenger disembarks at a coastwise port other than the port of embarkation, there is a violation of the coastwise law.</P> <P>(3) If the passenger is on a voyage to one or more coastwise ports and a distant foreign port or ports (whether or not the voyage includes a nearby foreign port or ports) and the passenger disembarks at a coastwise port, there is no violation of the coastwise law provided the passenger has proceeded with the vessel to a distant foreign port.</P> <P>(c) An exception to the prohibition in this section is the transportation of passengers between ports in Puerto Rico and other ports in the U.S. on passenger vessels not qualified to engage in the coastwise trade. Such transportation is permitted until there is a finding under 46 U.S.C. 289c that a qualified U.S.-flag passenger vessel is available for such service.</P> <P>(d) The owner or charterer of a foreign vessel or any other interested person may request from Headquarters, U.S. Customs Service, Attention: Entry Procedures and Carriers Branch, an advisory ruling as to whether a contemplated voyage would be considered to be coastwise transportation in violation of 46 U.S.C. 289. Such a request shall be filed in accordance with the provisions of part 177, Customs Regulations (19 CFR part 177).</P> <CITA>[T.D. 85-109, 50 FR 26984, July 1, 1985, as amended by T.D. 85-109, 50 FR 37519, Sept. 16, 1985; T.D. 99-27, 64 FR 13675, Mar. 22, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.80b</SECTNO> <SUBJECT>Coastwise transportation of merchandise.</SUBJECT> <P>(a) <E T="03">Effect of manufacturing or processing at intermediate port or place.</E> A coastwise transportation of merchandise takes place, within the meaning of the coastwise laws, when merchandise laden at a point embraced within the coastwise laws (“coastwise point”) is unladen at another coastwise point, regardless of the origin or ultimate destination of the merchandise. However, merchandise is not transported coastwise if at an intermediate port or place other than a coastwise point (that is at a foreign port or place, or at a port or place in a territory or possession of the United States not subject to the coastwise laws), it is manufactured or processed into a new and different product, and the new and different product thereafter is transported to a coastwise point.</P> <P>(b) <E T="03">Request for ruling.</E> Interested parties may request an advisory ruling from Headquarters, United States Customs Service, Attention: Entry Procedures and Carriers Branch, as to whether a specific action taken or to be taken with respect to merchandise at the intermediate port or place will <PRTPAGE P="56"/>result in its becoming a new and different product for purposes of this section. The request shall be filed in accordance with the provisions of part 177 of this chapter.</P> <CITA>[T.D. 79-193, 44 FR 42178, July 19, 1979, as amended by T.D. 91-77, 56 FR 46114, Sept. 10, 1991; 56 FR 47268, Sept. 18, 1991; T.D. 99-27, 64 FR 13675, Mar. 22, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.81</SECTNO> <SUBJECT>Reports of arrivals and departures in coastwise trade.</SUBJECT> <P>(a) No vessel which is documented with a coastwise license or registry endorsement or is owned by a citizen and exempt from documentation, and which is in ballast or laden only with domestic products or passengers being carried only between points in the United States shall be required to report arrival or to enter when coming into one port of the United States from any other such port, except as provided for in sections 4.83 and 4.84, nor to obtain a clearance, permit to proceed, or permission to depart when going from one port in the United States to any other such port except when transporting merchandise to a port in noncontinguous territory. <SU>111</SU> <FTREF/> </P> <FTNT> <P> <SU>111</SU> See § 4.84.</P> <P> <E T="51">112-114</E> [Reserved]</P> </FTNT> <P>(b) When the facts are as above stated except that the vessel is carrying bonded merchandise, the master shall report its arrival as provided for in § 4.2.</P> <P>(c) [Reserved]</P> <P>(d) The traveling Crew's Effects Declaration, Customs Form 1304, or Customs and Immigration Form I-418 with attached Customs Form 5129, referred to in § 4.85 (b), (c), and (e) shall be deposited with the port director upon arrival at each port in the United States and finally surrendered to the appropriate Customs officer or director of the port where the vessel first departs directly for a foreign port.</P> <P>(e) Before any foreign vessel departs in ballast, or solely with articles to be transported in accordance with § 4.93, from any port in the United States for any other such port, the master must apply to the port director for a permit to proceed by filing a Vessel Entrance or Clearance Statement, Customs Form 1300, in duplicate. If a vessel is proceeding in ballast and therefore the Cargo Declaration (Customs Form 1302) is omitted, the words “No merchandise on board” shall be inserted in item 16 of the Vessel Entrance or Clearance Statement. However, articles to be transported in accordance with § 4.93 must be manifested on the Cargo Declaration, as required by § 4.93(c). Three copies of the Cargo Declaration must be filed with the port director. When the port director grants the permit by making an appropriate endorsement on the Vessel Entrance or Clearance Statement (see § 4.85(b)), the duplicate copy, together with two copies of the Cargo Declaration covering articles to be transported in accordance with § 4.93, must be returned to the master. The traveling Crew's Effects Declaration, Customs Form 1304, and all unused crewmembers' declarations on Customs Form 5129 will be placed in a sealed envelope addressed to the appropriate Customs officer at the next intended domestic port and returned to the master for delivery. The master must execute a receipt for all unused crewmembers' declarations which are returned to him. Immediately upon arrival at the next United States port the master must report his arrival to the port director. He must make entry within 48 hours by filing with the port director the permit to proceed on the Vessel Entrance or Clearance Statement received at the previous port, a newly executed Vessel Entrance or Clearance Statement, a Crew's Effects Declaration of all unentered articles acquired abroad by crewmembers which are still on board, a Ship's Stores Declaration, Customs Form 1303, in duplicate of the stores remaining on board, both copies of the Cargo Declaration covering articles transported in accordance with § 4.93, and the document of the vessel. The traveling Crew's Effects Declaration and all unused crewmembers' declarations on Customs Form 5129 returned at the prior port to the master must be delivered by him to the appropriate Customs officer.</P> <P>(f) The master, licensed deck officer, or purser who enters or clears a vessel, or who obtains permission for a vessel to depart, when required under the provisions of this section or of §§ 4.82, 4.84, <PRTPAGE P="57"/>4.85, 4.87, 4.89, or 4.91 of the regulations of this part, may appear in person at the customhouse for that purpose, or any required oaths, related documents, and other papers properly executed by the master or other proper officer may be delivered at the customhouse by the vessel agent or other personal representative of the master.</P> <P>(g) In lieu of the procedures stated in §§ 4.85 and 4.87 and at the option of the owner or operator, unmanned non-self-propelled barges specifically designed for carriage aboard a vessel and regularly carried aboard a vessel in the foreign trade, hereinafter referred to as LASH-type barges, may move under a simplified permit-to-proceed procedure as follows:</P> <P>(1) At the port where a LASH-type barge begins a coastwise movement with inward foreign cargo, a permit to proceed on the Vessel Entrance or Clearance Statement, Customs Form 1300, must be obtained. A single permit to proceed may be used for all the barges proceeding to the same port of unlading in the same town. An inward foreign manifest of the cargo in each barge, destined to the port of unlading shown on the permit to proceed, must be attached to each permit. At the port of unlading of the barge, report of arrival and entry must be made immediately upon arrival to the appropriate Customs officer by presentation of the permit to proceed, manifests, and a new Vessel Entrance or Clearance Statement, Customs Form 1300. If only part of the inward foreign cargo is unladen, a new permit to proceed must be obtained and the inward foreign manifests must be attached to it.</P> <P>(2) At the port where a LASH-type barge begins a coastwise movement with export cargo, a permit to proceed on the Vessel Entrance or Clearance Statement, Customs Form 1300, must be presented to the appropriate Customs officer. A single permit to proceed may be presented for all the barges proceeding from the same port of lading in the same tow. Required shipper's export declarations for LASH-type barges must be filed at the port where the barges will be taken aboard a barge-carrying vessel. At the next port, a report of arrival must be made immediately upon arrival and entry must be made within 48 hours by presentation of the permit to proceed received upon departure from the prior port and a newly executed Vessel Entrance or Clearance Statement, Customs Form 1300.</P> <P>(3) When foreign LASH-type barges are proceeding between ports of the United States under paragraph (e) of this section, a single permit to proceed may be used for all the barges proceeding to the same port in the same tow.</P> <P>(4) In lieu of the master of the towing vessel executing and delivering documents required under permit-to-proceed procedures (see § 4.81(f)) at the port where a LASH-type barge begins a coastwise movement, the master of the towing vessel may designate in writing the owner or operator of the barges as his representative with authority to execute and deliver such documents at the customhouse. The owner or operator of the barges may designate representatives to perform such functions at ports or places where permit-to-proceed documents must be delivered. Documents obtained from Customs officers at one place by such a representative may be forwarded by any suitable means to the representative who must present them to Customs officers at another place, the only requirement being that the forms are properly completed and are presented within the prescribed time periods. Moreover, instead of a written designation from each master of a towing vessel, a blanket designation in writing from the owner or operator of one or more towing vessels on behalf of masters of their towing vessels, designating the owner or operator of the barges to be the representative of the master for purposes of executing and delivering permit-to-proceed documents, is authorized.</P> <P>(5) [Reserved]</P> <P>(6) When a LASH-type barge is proceeding to a place in the United States that is not a port of entry, § 101.4(a) and (b) of this chapter are applicable. No merchandise shall be unladen from a LASH-type barge until a permit or special license therefor is obtained in accordance with § 4.30 except that a single permit to unlade may be used for all <PRTPAGE P="58"/>barges that arrived at the port of unlading in the same tow.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 71-169, 36 FR 12604, July 2, 1971; T.D. 74-63, 39 FR 6108, Feb. 19, 1974; T.D. 74-284, 39 FR 39718, Nov. 11, 1974; T.D. 75-315, 40 FR 58852, Dec. 19, 1975; T.D. 77-241, 42 FR 54936, Oct. 12, 1977; T.D. 77-255, 42 FR 56322, Oct. 25, 1977; T.D. 83-214, 48 FR 46512, Oct. 13, 1983; T.D. 92-74, 57 FR 35752, Aug. 11, 1992; T.D. 93-96, 58 FR 67317, Dec. 21, 1993; T.D. 00-22, 65 FR 16515, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.81a</SECTNO> <SUBJECT>Certain barges carrying merchandise transferred from another barge.</SUBJECT> <P>(a) A LASH-type barge (as defined in § 4.81(g)) documented as a vessel of the United States but not qualified to engage in the coastwise trade or a LASH-type barge of a nation found to grant reciprocal privileges to United States-flag LASH-type barges may transport inward foreign and export cargo between points embraced within the coastwise laws of the United States after the merchandise has been transferred to it from another LASH-type barge owned or leased by the same owner or operator. This section is not applicable to transportation between the continental United States and noncontiguous States, districts, territories, and possessions embraced within the coastwise laws. The permit to proceed shall include a statement that the unqualified LASH-type barge is owned or leased by the owner or operator of the LASH-type barge from which the merchandise was transferred.</P> <P>(b) The following nations have been found to extend privileges reciprocal to those provided in paragraph (a) of this section to LASH-type barges of the United States: </P> <EXTRACT> <FP SOURCE="FP-1">Federal Republic of Germany.</FP> <FP SOURCE="FP-1">Netherlands.</FP> <FP SOURCE="FP-1">Sweden.</FP> <FP SOURCE="FP-1">Union of Soviet Socialist Republics.</FP> </EXTRACT> <CITA>[T.D. 74-63, 39 FR 6108, Feb. 19, 1974, as amended by T.D. 74-292, 39 FR 41360, Nov. 27, 1974; T.D. 75-7, 39 FR 44660, Dec. 26, 1974; T.D. 75-315, 40 FR 58852, Dec. 19, 1975; T.D. 78-492, 43 FR 58814, Dec. 18, 1978]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.82</SECTNO> <SUBJECT>Touching at foreign port while in coastwise trade.</SUBJECT> <P>(a) A United States documented vessel with a registry or, coastwise endorsement, or both which, during a voyage between ports in the United States, touches at one or more foreign ports and there discharges or takes on merchandise, passengers, baggages, or mail shall obtain a permit to proceed or clearance at each port of lading in the United States for the foreign port or ports at which it is intended to touch. The Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A (see § 4.63), shall show only the cargo for foreign destination. (See §§ 4.61 and 4.87.)</P> <P>(b) The master shall also present to the port director a coastwise Cargo Declaration in triplicate of the merchandise to be transported via the foreign port or ports to the subsequent ports in the United States. It shall describe the merchandise and show the marks and numbers of the packages, the names of the shippers and consignees, and the destinations. The port director shall certify the two copies and return them to the master. Merchandise carried by the vessel in bond under a transportation entry and manifest, Customs Form 7512, shall not be shown on the coastwise Cargo Declaration.</P> <P>(c) Upon arrival from the foreign port or ports at the subsequent port in the United States, a report of arrival and entry of the vessel shall be made, and tonnage taxes shall be paid unless the vessel is properly operating under a document with Great Lakes license endorsement. The master shall present Cargo Declaration in accordance with § 4.7 and the certified copies of the coastwise Cargo Declaration, Customs Form 1302.</P> <P>(d) All merchandise on the vessel upon its arrival at the subsequent port in the United States is subject to such Customs examination and treatment as may be necessary to protect the revenue. Any article on board which is not identified to the satisfaction of the port director, by the coastwise Cargo Declaration, Customs Form 1302, or otherwise, as part of the coastwise cargo, shall be treated as imported merchandise.</P> <CITA>[T.D. 77-255, 42 FR 56322, Oct. 25, 1977, as amended by T.D. 83-214, 48 FR 46513, Oct. 13, 1983; T.D. 84-193, 49 FR 35485, Sept. 10, 1984; T.D. 99-64, 64 FR 43265, Aug. 10, 1999]</CITA> </SECTION> <SECTION> <PRTPAGE P="59"/> <SECTNO>§ 4.83</SECTNO> <SUBJECT>Trade between United States ports on the Great Lakes and other ports of the United States.</SUBJECT> <P>(a) If a vessel proceeding from or to a port of the United States on the Great Lakes to or from any other port of the United States via the St. Lawrence River is intended to touch at any foreign port and does so touch, it will be subject to the usual requirements for manifesting, clearing, report of arrival, entry, payment of fees for entry and clearance, and tonnage taxes. Vessels which are boarded on the St. Lawrence River by Canadian authorities for the purposes of inspecting the vessel and taking a passing report are not deemed to have touched at a foreign port, provided that no ship's stores are landed or taken aboard and no other business is transacted at the port or place of boarding.</P> <P>(b) A vessel in the coastwise trade only, which is proceeding from a port of the United States on the Great Lakes via the Hudson River and otherwise than by sea, may operate under a document with a Great Lakes license endorsement and shall not be subject to the requirements for clearance, report of arrival, or entry.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 69-266, 34 FR 20423, Dec. 31, 1969; T.D. 83-214, 48 FR 46513, Oct. 13, 1983]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.84</SECTNO> <SUBJECT>Trade with noncontiguous territory.</SUBJECT> <P>(a) No foreign vessel shall depart from a port in noncontiguous territory of the United States for any other port in noncontiguous territory or for any port in any State or the District of Columbia, nor from any port in any State or the District of Columbia for any port in noncontiguous territory, until a clearance for the vessel has been granted. Such a clearance shall be granted in accordance with the applicable provisions of § 4.61 of the regulations of this part, including clearance of a vessel simultaneously engaged in one or more of the transactions listed in § 4.90(a)(4), (5), or (6) of this part. When merchandise is laden on a foreign vessel in noncontiguous territory other than Puerto Rico, for transportation on that vessel to a port in any State, the District of Columbia, or noncontiguous territory, and when this transportation is not forbidden by the coastwise laws, the merchandise may be laden and shipped without shipper's export declarations.</P> <P>(b) The master of every foreign vessel arriving at a port in any State or the District of Columbia or in noncontiguous territory of the United States from a port in noncontiguous territory to which the coastwise laws do not apply (e.g., Virgin Islands and American Samoa), or arriving at any port in noncontiguous territory to which the coastwise laws do not apply from any place embraced within the coastwise laws, shall immediately report its arrival and make entry for the vessel within 48 hours after its arrival.</P> <P>(c)(1) A vessel which is not required to clear but which is transporting merchandise from a port in any State or the District of Columbia to any noncontiguous territory of the United States (excluding Puerto Rico), or from Puerto Rico to any State or the District of Columbia, or any other noncontiguous territory, shall not be permitted to depart without filing a complete manifest, when required by regulations of the Bureau of the Census (15 CFR part 30), and all required Shipper's Export Declarations, unless before the vessel departs an approved bond is filed for the timely production of the required documents, as specified in 15 CFR 30.24. Requests for permission to depart may be written or oral and permission to depart shall be granted orally by the appropriate Customs officer. However, if the request is to depart prior to the filing of the required manifest and export declarations, permission shall not be granted unless the appropriate bond is on file. In the latter case, the Customs officer shall keep a simplified record of the necessary information in order to assure that the manifest and export declarations are filed within the required time period. The Vessel Entrance or Clearance Statement, Customs Form 1300 (see § 4.63(a)), required at the time of clearance is not required to be taken to obtain permission to depart.</P> <P>(2) A vessel which is not required to clear but which is transporting merchandise from a port in any State or the District of Columbia to Puerto Rico shall file a complete manifest, <PRTPAGE P="60"/>when required by the regulations of the Bureau of the Census (15 CFR part 30), and all required Shipper's Export Declarations within one business day after arrival, as defined in § 4.2(b) of this part, with the appropriate Customs officer in Puerto Rico. If the complete manifest and all required Shipper's Export Declarations are not filed with the appropriate Customs officer within that time frame, an appropriate bond shall be filed with the Customs officer for the timely production of the required documents as specified in 15 CFR 30.24. In these instances when a bond is filed, the Customs officer shall keep a simplified record of the necessary information in order to ensure that the manifest and export declarations are filed not later than the seventh business day after arrival in Puerto Rico.</P> <P>(d) Upon arrival of a vessel of the United States at a port in any State, the District of Columbia, or Puerto Rico from a port in noncontiguous territory other than Puerto Rico, the master shall immediately report its arrival and shall prepare, produce, and file a Cargo Declaration in the form and manner and at the times specified in §§ 4.7 and 4.9 but shall not be required to make entry. If the vessel proceeds directly to another port in any State, the District of Columbia, or Puerto Rico, the master shall prepare, produce, and file a Cargo Declaration in the form and manner and at the times specified in § 4.85 but no permit to proceed on the Vessel Entrance or Clearance Statement, Customs Form 1300, shall be required for the purposes of this paragraph. No cargo shall be unladen from any such vessel until Cargo Declarations have been filed and a permit to unlade has been issued in accordance with the procedure specified in § 4.30.</P> <P>(e) No vessel shall bring guano to the United States from a guano island appertaining to the United States (see 48 U.S.C. 1411) unless such a vessel is entitled to engage in the coastwide trade.</P> <P>(f) No vessel owned by a corporation which qualifies as a citizen under the Act of September 2, 1958 (46 U.S.C. 883-1) shall, while under demise or bareboat charter from such corporation, be granted clearance or permitted to depart in trade with noncon-tiguous territory.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 69-266, 34 FR 20423, Dec. 31, 1969: T.D. 71-169, 36 FR 12604, July 2, 1971; T.D. 77-255, 42 FR 56323, Oct. 25, 1977; T.D. 79-276, 44 FR 61956, Oct. 29, 1979; T.D. 93-61, 58 FR 41425, Aug. 4, 1993; T.D. 93-96, 58 FR 67317, Dec. 21, 1993; T.D. 00-22, 65 FR 16516, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.85</SECTNO> <SUBJECT>Vessels with residue cargo for domestic ports.</SUBJECT> <P>(a) Any foreign vessel or documented vessel with a registry or, where appropriate, a Great Lakes license endorsement, arriving from a foreign port with cargo or passengers manifested for ports in the United States other than the port of first arrival, may proceed with such cargo or passengers from port to port, provided a bond on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter relating to international carriers in a suitable amount is on file with the director of the port of first entry. <SU>115</SU> <FTREF/> No additional bond shall be required at subsequent ports of entry. Before the vessel departs from the port of first arrival, the master shall obtain from the port director a certified copy of the complete inward foreign manifest (hereinafter referred to as the traveling manifest). The certified copy shall have a legend similar to the following endorsed on the Vessel Entrance or Clearance Statement, Customs Form 1300:</P> <FTNT> <P> <SU>115</SU> “* * * Any vessel arriving from a foreign port or place having on board merchandise shown by the manifest to be destined to a port or ports in the United States other than the port of entry at which such vessel first arrived and made entry may proceed with such merchandise from port to lading thereof.” (Tariff Act of 1930, sec. 442; 19 U.S.C. 1442)</P> <P> <E T="51">116-118</E> [Reserved]</P> </FTNT> <EXTRACT> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">PortDate</P> <P>Certified to be a true copy of the original inward foreign manifest. </P> <HALFDASH/> <FP SOURCE="FRP">Signature and title</FP> </EXTRACT> <P>(b)(1) Before a vessel proceeds from one domestic port to another with cargo or passengers on board as described in paragraph (a) of this section, <PRTPAGE P="61"/>the master must present to the director of such port of departure an application in triplicate on Customs Form 1300 for a permit to proceed to the next port. When a port director grants the permit on Customs Form 1300, the following legend must be endorsed on the form: </P> <EXTRACT> <FP>Port </FP> <FP>Date</FP> <FP>Permission is granted to proceed to the port named in item 12.</FP> <FP>________</FP> <FP>Signature and title</FP> </EXTRACT> <P>(2) The duplicate must be attached to the traveling manifest and the triplicate (the permit to proceed to be delivered at the next port) must be returned to the master, together with the traveling manifest and the vessel's document, if on deposit. If no inward foreign cargo or passengers are to be discharged at the next port, that fact must be indicated on Customs Form 1300 by inserting “To load only” in parentheses after the name of the port to which the vessel is to proceed. The traveling Crew's Effects Declaration covering articles acquired abroad by officers and members of the crew, together with the unused crewmembers' declarations prepared for such articles, will be placed in a sealed envelope addressed to the appropriate Customs officer at the next port and given to the master for delivery.</P> <P>(c)(1) Upon the arrival of a vessel at the next and each succeeding domestic port with inward foreign cargo or passengers still on board, the master must immediately report its arrival and make entry within 48 hours. To make such entry, he must deliver to the port director the vessel's document, the permit to proceed (Customs Form 1300 endorsed in accordance with paragraph (b) of this section), the traveling manifest, and the traveling Crew's Effects Declaration (Customs Form 1304), together with the crewmembers' declarations received on departure from the previous port. The master must also present an abstract manifest consisting of a newly executed Vessel Entrance or Clearance Statement, Customs Form 1300, a Cargo Declaration, Customs Form 1302, and a Passenger List, Customs and Immigration Form I-418, in such number of copies as may be required for local Customs purposes, of any cargo or passengers on board manifested for discharge at that port, a Crew's Effects Declaration in duplicate of all unentered articles acquired abroad by officers and crewmembers which are still on board, a Ship's Stores Declaration, Customs Form 1303, in duplicate of the sea or ship's stores remaining on board, and if applicable, the Cargo Declaration required by § 4.86. If no inward foreign cargo or passengers are to be discharged, the Cargo Declaration or Passenger List may be omitted from the abstract manifest, and the following legend must be placed in item 15 of the Vessel Entrance or Clearance Statement: </P> <EXTRACT> <P>Vessel on an inward foreign voyage with residue cargo/passengers for ____. No cargo or passengers for discharge at this port.</P> </EXTRACT> <P>(2) The traveling manifest, together with a copy of the newly executed Vessel Entrance or Clearance Statement, will serve the purpose of a copy of an abstract manifest at the port where it is finally surrendered.</P> <P>(d) If boarding is required before the port director will issue a permit or special license to lade or unlade, the abstract manifest described in paragraph (c) of this section shall be ready for presentation to the boarding officer.</P> <P>(e) The traveling manifest shall be surrendered to the director of the final domestic port of discharge of the cargo, except that if residue foreign cargo remains on board for discharge at a foreign port or ports, the traveling manifest shall be surrendered at the final port of departure from the United States. However, it shall not be surrendered at the port from which the vessel departs for another United States port, via an intermediate foreign port, under § 4.89 if residue foreign cargo remains on board for discharge at a subsequent U.S. port. The traveling Crew's Effects Declaration shall be finally surrendered to the director of any port from <PRTPAGE P="62"/>which the vessel will depart directly for a foreign port.</P> <CITA>[T.D. 71-169, 36 FR 12604, July 2, 1971, as amended by T.D. 77-255, 42 FR 56323, Oct. 25, 1977; T.D. 83-214, 48 FR 46513, Oct. 13, 1983; T.D. 84-213, 49 FR 41164, Oct. 19, 1984; T.D. 92-74, 57 FR 35752, Aug. 11, 1992; T.D. 93-96, 58 FR 67317, Dec. 21, 1993; T.D. 94-24, 59 FR 13200, Mar. 21, 1994; T.D. 00-22, 65 FR 16516, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.86</SECTNO> <SUBJECT>Intercoastal residue—cargo procedure; optional ports.</SUBJECT> <P>(a) When a vessel arrives at an Atlantic or Pacific coast port from a foreign port or ports with residue cargo for delivery at a port or ports on the opposite coast or on the Great Lakes, or where such arrival is at a port on the Great Lakes, with residue cargo for delivery at a port or ports on the Atlantic or Pacific coasts, or both, and the master, owner, or agent is unable at that time to designate the specific port or ports of discharge of that residue cargo, the Cargo Declaration, Customs Form 1302, filed on entry in accordance with § 4.7(b) shall show such cargo as destined for “optional ports, Atlantic coast,” or “optional ports, Pacific coast,” or “optional ports, Great Lakes coast,” as the case may be. The traveling manifest shall be similarly noted. Upon arrival of the vessel at the first port on the next coast, the master, owner, or agent must designate the port or ports of discharge of residue cargo as required by section 431, Tariff Act of 1930.</P> <P>(b) For this purpose, the master shall furnish with the other papers required upon entry a Cargo Declaration, Customs Form 1302 in original only of inward foreign cargo remaining on board for discharge at optional ports on that coast, and the Cargo Declaration, must designate the specific ports of intended discharge for that cargo. The traveling manifest shall be amended to agree with that Cargo Declaration so as to show the newly designated ports of discharge on that coast and shall be used to verify the abstract Cargo Declarations surrendered at subsequent ports on that coast.</P> <CITA>[T.D. 77-255, 42 FR 56323, Oct 25, 1977]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.87</SECTNO> <SUBJECT>Vessels proceeding foreign via domestic ports.</SUBJECT> <P>(a) Any foreign vessel or documented vessel with a registry or, where appropriate, a Great Lakes license endorsement may proceed from port to port in the United States to lade cargo or passengers for foreign ports.</P> <P>(b) When applying for a clearance from the first and each succeeding port of lading, the master must present to the port director a Vessel Entrance or Clearance Statement, Customs Form 1300, in duplicate and a Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A, in accordance with § 4.63(a), of all the cargo laden for export at that port. The Vessel Entrance or Clearance Statement must clearly indicate all previous ports of lading.</P> <P>(c) Upon compliance with the applicable provisions of § 4.61, the port director will grant the permit to proceed by making the endorsement prescribed by § 4.85(b) on the Vessel Entrance or Clearance Statement, Customs Form 1300. One copy will be returned to the master, together with the vessel's document if on deposit. The traveling Crew's Effects Declaration, Customs Form 1304, together with any unused crewmembers' declarations, will be placed in a sealed envelope addressed to the appropriate Customs officer at the next domestic port and returned to the master.</P> <P>(d) On arrival at the next and each succeeding domestic port, the master must immediately report arrival. He must also make entry within 48 hours by presenting the vessel's document, the permit to proceed on the Vessel Entrance or Clearance Statement, Customs Form 1300, received by him upon departure from the last port, a Crew's Effects Declaration, Customs Form 1304, in duplicate listing all unentered articles acquired aboard by officers and crew of the vessel which are still retained on board, and a Ship's Stores Declaration, Customs Form 1303, in duplicate of the stores remaining aboard. The master must also execute a Vessel Entrance or Clearance Statement. The traveling Crew's Effects Declaration, together with any unused crewmembers' declarations returned to the <PRTPAGE P="63"/>master at the prior port, will be delivered by him to the port director.</P> <P>(e) Clearance shall be granted at the final port of departure from the United States in accordance with § 4.61.</P> <P>(f) If a complete Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A (see § 4.63), and all required shipper's export declarations are not available for filing before departure of a vessel from any port, clearance on the Vessel Entrance or Clearance Statement, Customs Form 1300, may be granted in accordance with § 4.75, subject to the limitation specified in § 4.75(c).</P> <P>(g) When the procedure outlined in paragraph (f) of this section is followed at any port, the owner or agent of the vessel must deliver to the director of that port within 4 business days after the vessel's clearance a Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A(see § 4.63), and the export declarations to cover the cargo laden for export at that port.</P> <CITA>[T.D. 77-255, 42 FR 56324, Oct. 25 1977, as amended by T.D. 83-214, 48 FR 46513, Oct. 13, 1983; T.D. 84-193, 49 FR 35485, Sept. 10, 1984; T.D. 92-74, 57 FR 35752, Aug. 11, 1992; T.D. 93-96, 58 FR 67317, Dec. 21, 1993; T.D. 00-22, 65 FR 16517, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.88</SECTNO> <SUBJECT>Vessels with residue cargo for foreign ports.</SUBJECT> <P>(a) Any foreign vessel or documented vessel with a registry or, where appropriate, a Great Lakes license endorsement which arrives at a port in the United States from a foreign port shall not be required to unlade any merchandise manifested for a foreign destination provided a bond on Customs Form 301, containing the bond conditions set forth in § 113.64 of this chapter relating to international carriers in a suitable amount is on file with the director of the port of first entry. <SU>119</SU> <FTREF/> </P> <FTNT> <P> <SU>119</SU> “Any vessel having on board merchandise shown by the manifest to be destined to a foreign port or place may, after the report and entry of such vessel under the provisions of this Act, proceed to such foreign port of destination with the cargo so destined therefor, without unlading the same and without the payment of duty thereon. * * *” (Tariff Act of 1930, sec. 442; 19 U.S.C. 1442)</P> </FTNT> <P>(b) The port director shall designate the items of such merchandise, if any, for which foreign landing certificates <SU>120</SU> <FTREF/> will be required.</P> <FTNT> <P> <SU>120</SU> “The Secretary of the Treasury may by regulations require the production of landing certificates in respect of merchandise exported from the United States, or in respect of residue cargo, in cases in which he deems it necessary for the protection of the revenue.” (Tariff Act of 1930, sec. 622; 19 U.S.C. 1622)</P> </FTNT> <P>(c) If the vessel clears directly foreign from the first port of arrival, cargo brought in from foreign ports and retained on board may be declared on the Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A (see § 4.63), by the insertion of the following statement: </P> <EXTRACT> <P>All cargo declared on entry in this port as cargo for discharge at foreign ports and so shown on the Cargo Declaration filed upon entry has been and is retained on board.</P> </EXTRACT> <FP>If any such cargo has been landed, the Cargo Declaration shall describe each item of the cargo from a foreign port which has been retained on board (see § 4.63(a).</FP> <P>(d) If the vessel is proceeding to other ports in the United States with foreign residue cargo on board manifested for discharge at a foreign port or ports, a procedure like that set forth in § 4.85 shall be followed with respect thereto.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 77-255, 42 FR 56324, Oct. 25, 1977; T.D. 83-214, 48 FR 46513, Oct. 13, 1983; T.D. 84-193, 49 FR 35485, Sept. 10, 1984; 49 FR 41164, Oct. 19, 1984]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.89</SECTNO> <SUBJECT>Vessels in foreign trade proceeding via domestic ports and touching at intermediate foreign ports.</SUBJECT> <P>(a) A vessel proceeding from port to port in the United States in accordance with §§ 4.85, 4.86, or 4.87 may touch at an intermediate foreign port or ports to lade or discharge cargo or passengers. In such a case the vessel shall obtain clearance from the last port of departure in the United States before proceeding to the intermediate foreign port or ports at which it is intended to touch. The Cargo Declaration Outward With Commercial Forms, Customs Form 1302-A (see § 4.63), shall show the cargo for such foreign destination in the manner provided in § 4.88(c).<PRTPAGE P="64"/> </P> <P>(b) The master shall also present to the port director the Cargo Declaration or Cargo Declarations required by §§ 4.85, 4.86, or 4.87, and obtain a permit to proceed on the Vessel Entrance or Clearance Statement, Customs Form 1300, to the next port in the United States at which the vessel will touch.</P> <P>(c) Upon arrival at the next port in the United States after touching at a foreign port or ports a report of arrival and entry shall be made. The Cargo Declaration, Customs Form 1302, filed at time of entry shall list the cargo laden at the intermediate foreign port or ports.</P> <P>(d) The master shall also present to the port director the permit to proceed on the Vessel Entrance or Clearance Statement, Customs Form 1300, and the Cargo Declaration from the last previous port in the United States as provided for in §§ 4.85, 4.86, or 4.87.</P> <CITA>[T.D. 77-255, 42 FR 56324, Oct. 25, 1977, as amended by T.D. 84-193, 49 FR 35485, Sept. 10, 1984; T.D. 00-22, 65 FR 16517, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.90</SECTNO> <SUBJECT>Simultaneous vessel transactions.</SUBJECT> <P>(a) A vessel may proceed from port to port in the United States for the purpose of engaging in two or more of the following transactions simultaneously, <SU>121</SU> <FTREF/> subject to the limitations hereafter mentioned in this section and the conditions stated in the sections indicated in the list:</P> <FTNT> <P> <SU>121</SU> For the purposes of this part, an inward foreign voyage is completed at the port of final discharge of inbound passengers or cargo, and an outward foreign voyage begins at the port where cargo or passengers are first laden for carriage to a foreign destination.</P> </FTNT> <P>(1) Coastwise trade (§ 4.80).</P> <P>(2) Touching at a foreign port while in coastwise trade (§ 4.82).</P> <P>(3) Trade with noncontiguous territory of the United States (§ 4.84).</P> <P>(4) Carriage of residue cargo or passengers from foreign ports (§§ 4.85-4.86).</P> <P>(5) Carriage of cargo or passengers laden for foreign ports (§ 4.87).</P> <P>(6) Carriage of residue cargo for foreign ports (§ 4.88).</P> <P>(b) When a vessel is engaged simultaneously in two or more such transactions, the master shall indicate each type of transaction in which the vessel is engaged in his application for clearance on Customs Form 1300. The master shall conform simultaneously to all requirements of these regulations with respect to each transaction in which the vessel is engaged.</P> <P>(c) A foreign vessel is not authorized by this section to engage in the coastwise trade, including trade with noncontiguous territory embraced within the coastwise laws.</P> <P>(d) A documented vessel may engage in transactions (2), (4), (5), or (6) only if the vessel's document has a registry or, where appropriate, a Great Lakes license endorsement. Such a vessel shall not engage in transactions (1) or (3) unless permitted by the endorsement on its Certificate of Documentation to do so.</P> <P>(e) When a single entry bond, containing the bond conditions set forth in § 113.64, relating to international carriers, is filed at any port and it is applicable to the current voyage of the vessel, it shall cover all other transactions engaged in on that voyage of a like nature and another bond containing the international carrier bond conditions need not be filed.</P> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 71-169, 36 FR 12605, July 2, 1971; T.D. 83-214, 48 FR 46513, Oct. 13, 1983; T.D. 84-213, 49 FR 41164, Oct. 19, 1984; T.D. 00-22, 65 FR 16517, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.91</SECTNO> <SUBJECT>Diversion of vessel; transshipment of cargo.</SUBJECT> <P>(a) If any vessel granted a permit to proceed from one port in the United States for another such port as provided for in §§ 4.81(e), 4.85, 4.87, or 4.88, is, while en route, diverted to a port in the United States other than the one specified in the permit to proceed (Customs Form 1300), <SU>122</SU> <FTREF/> the owner or agent of the vessel immediately shall give notice of the diversion to the port director who granted the permit, informing him of the new destination of the vessel and requesting him to notify the director of the latter port. Such notification by the port director shall constitute an amendment of the permit previously granted, shall authorize the vessel to proceed to the new destination, and shall be filed by the director <PRTPAGE P="65"/>of the latter port with the Form 1300 submitted on entry of the vessel.</P> <FTNT> <P> <SU>122</SU> See § 4.33.</P> </FTNT> <P>(b) If any vessel cleared from a port in the United States for a foreign port as provided for in § 4.60 is diverted, while en route, to a port in the United States other than that from which it was cleared, the owner or agent of the vessel immediately shall give notice of the diversion to the port director who granted the clearance, informing him of the new destination of the vessel and requesting him to notify the director of the latter port. Such notification by the port director shall constitute a permit to proceed coastwise, and shall authorize the vessel to proceed to the new destination. On arrival at the new destination, the master shall immediately report arrival. He shall also make entry within 48 hours by presenting (1) the vessel's document, (2) the foreign clearance on Form 1300 granted by the director of the port of departure, (3) a certificate that when the vessel was cleared from the last previous port in the United States there were on board cargo and/or passengers for the ports named in the foreign clearance certificate only and that additional cargo or passengers (have) (have not) been taken on board or discharged since such clearance was granted (specifying the particulars if any passengers or cargo were taken on board or discharged), (4) a Crew's Effects Declaration in duplicate of all unentered articles acquired abroad by the officers and crew of the vessel which are still retained on board, and (5) a Ship's Stores Declaration in duplicate of the stores on board.</P> <P>(c) In a case of necessity, a port director may grant an application on Customs Form 3171 of the owner or agent of an established line for permission to transship <SU>123</SU> <FTREF/> all cargo and passengers from one vessel of the United States to another such vessel under Customs supervision, if the first vessel is transporting residue cargo for domestic or foreign ports or is on an outward foreign voyage or a voyage to noncontiguous territory of the United States, and is following the procedure prescribed in §§ 4.85, 4.87, or 4.88. When inward foreign cargo or passengers are so transshipped to another vessel, a separate traveling manifest (Cargo Declaration, Customs Form 1302, or Passenger List, Customs and Immigration Form I-418) shall be used for the transshipped cargo or passengers, whether or not the forwarding vessel is also carrying other residue cargo or passengers. An appropriate cross-reference shall be made on the separate traveling manifest to show whether any other traveling manifest is being carried forward on the same vessel.</P> <FTNT> <P> <SU>123</SU> See § 4.31.</P> <P> <SU>124</SU> [Reserved]</P> </FTNT> <CITA>[T.D. 71-169, 36 FR 12605, July 2, 1971, as amended by T.D. 77-255, 42 FR 56324, Oct. 25, 1977; T.D. 93-96, 58 FR 67317, Dec. 21, 1993; T.D. 00-22, 65 FR 16517, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.92</SECTNO> <SUBJECT>Towing.</SUBJECT> <P>No vessel other than a vessel documented for the coastwise or Great Lakes trade, or which would be entitled to be so documented except for its tonnage (see § 4.80), may tow a vessel other than a vessel in distress between points in the U.S. embraced within the coastwise laws, or for any part of such towing (46 U.S.C. App. 316(a)). The penalties for violation of this provision are a fine of from $350 to $1100 against the owner or master of the towing vessel and a further penalty against the towing vessel of $60 per ton of the towed vessel (46 U.S.C. App. 316(a), as adjusted by the Federal Civil Penalties Inflation Adjustment Act of 1990).</P> <CITA>[T.D. 93-12, 58 FR 13197, Mar. 10, 1993, as amended by T.D. 03-11, 68 FR 13820, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.93</SECTNO> <SUBJECT>Coastwise transportation by certain vessels of empty vans, tanks, and barges, equipment for use with vans and tanks; empty instruments of international traffic; stevedoring equipment and material; procedures.</SUBJECT> <P>(a) Vessels of the United States prohibited from engaging in the coastwise trade and vessels of nations found to grant reciprocal privileges to vessels of the United States may transport the following articles between points embraced within the coastwise laws of the United States:</P> <P>(1) Empty cargo vans, empty lift vans, and empty shipping tanks; equipment for use with cargo vans, lift vans, <PRTPAGE P="66"/>or shipping tanks; empty barges specifically designed for carriage aboard a vessel and equipment, excluding propulsion equipment, for use with such barges; and empty instruments of international traffic exempted from application of the Customs laws by the Secretary of the Treasury pursuant to the provisions of section 322(a), Tariff Act of 1930 (19 U.S.C. 1322(a)), if such articles are owned or leased by the owner or operator of the transporting vessel and are transported for his use in handling his cargo in foreign trade.</P> <P>(2) Stevedoring equipment and material, if such equipment and material is owned or leased by the owner or operator of the transporting vessel, or is owned or leased by the stevedoring company contracting for the lading or unlading of that vessel, and is transported without charge for use in the handling of cargo in foreign trade. <SU>125</SU> <FTREF/> </P> <FTNT> <P> <SU>125</SU> “* * * <E T="03">Provided further,</E> That upon such terms and conditions as the Secretary of the Treasury by regulation may prescribe, and, if the transporting vessel is of foreign registry, upon a finding by the Secretary of the Treasury, pursuant to information obtained and furnished by the Secretary of State, that the government of the nation of registry extends reciprocal privileges to vessels of the United States, this section shall not apply to the transportation by vessels of the United States not qualified to engage in the coastwise trade, or by vessels of foreign registry, of (a) empty cargo vans, empty lift vans, and empty shipping tanks, (b) equipment for use with cargo vans, lift vans, or shipping tanks, (c) empty barges specifically designed for carriage aboard a vessel, and (d) any empty instrument for international traffic exempted from application of the customs laws by the Secretary of the Treasury pursuant to the provisions of section 322(a), Tariff Act of 1930 (19 U.S.C. 1322(a)), if the articles described in clauses (a) through (d) are owned or leased by the owner or operator of the transporting vessel and are transported for his use in handling his cargo in foreign trade; and (e) stevedoring equipment and material, if such equipment and material is owned or leased by the owner or operator of the transported vessel, or is owned or leased by the stevedoring company contracting for the lading or unlading of that vessel, and is transported without charge for use in the handling of cargo in foreign trade.” (46 U.S.C. 883).</P> <P> <E T="51">126-130</E> [Reserved]</P> </FTNT> <P>(b)(1) The following nations have been found to extend privileges reciprocal to those provided in paragraph (a) of this section for empty cargo vans, empty lift vans, and empty shipping tanks to vessels of the United States: </P> <EXTRACT> <FP SOURCE="FP-1">Antigua and Barbuda.</FP> <FP SOURCE="FP-1">Australia.</FP> <FP SOURCE="FP-1">Austria.</FP> <FP SOURCE="FP-1">Bahamas, The.</FP> <FP SOURCE="FP-1">Bahrain</FP> <FP SOURCE="FP-1">Belgium.</FP> <FP SOURCE="FP-1">Bermuda.</FP> <FP SOURCE="FP-1">Brazil.</FP> <FP SOURCE="FP-1">Canada.</FP> <FP SOURCE="FP-1">Chile.</FP> <FP SOURCE="FP-1">China*.</FP> <FP SOURCE="FP-1">Colombia.</FP> <FP SOURCE="FP-1">Cyprus.</FP> <FP SOURCE="FP-1">Denmark.</FP> <FP SOURCE="FP-1">Ecuador.</FP> <FP SOURCE="FP-1">Finland.</FP> <FP SOURCE="FP-1">France.</FP> <FP SOURCE="FP-1">Guatemala.</FP> <FP SOURCE="FP-1">Germany, Federal Republic of.</FP> <FP SOURCE="FP-1">Greece.</FP> <FP SOURCE="FP-1">Iceland.</FP> <FP SOURCE="FP-1">India.</FP> <FP SOURCE="FP-1">Iran.</FP> <FP SOURCE="FP-1">Ireland.</FP> <FP SOURCE="FP-1">Israel.</FP> <FP SOURCE="FP-1">Italy.</FP> <FP SOURCE="FP-1">Ivory Coast.</FP> <FP SOURCE="FP-1">Japan.</FP> <FP SOURCE="FP-1">Kuwait.</FP> <FP SOURCE="FP-1">Liberia.</FP> <FP SOURCE="FP-1">Luxembourg.</FP> <FP SOURCE="FP-1">Malta.</FP> <FP SOURCE="FP-1">Marshall Islands, Republic of the.</FP> <FP SOURCE="FP-1">Mexico.</FP> <FP SOURCE="FP-1">Netherlands.</FP> <FP SOURCE="FP-1">Netherlands Antilles.</FP> <FP SOURCE="FP-1">Norway.</FP> <FP SOURCE="FP-1">Pakistan.</FP> <FP SOURCE="FP-1">Philippines.</FP> <FP SOURCE="FP-1">Polish People's Republic.</FP> <FP SOURCE="FP-1">Portugal.</FP> <FP SOURCE="FP-1">Republic of Korea.</FP> <FP SOURCE="FP-1">Republic of Panama.</FP> <FP SOURCE="FP-1">Republic of Singapore.</FP> <FP SOURCE="FP-1">Republic of Zaire.</FP> <FP SOURCE="FP-1">St. Vincent and the Grenadines.</FP> <FP SOURCE="FP-1">Saudi Arabia.</FP> <FP SOURCE="FP-1">South Africa.</FP> <FP SOURCE="FP-1">Spain.</FP> <FP SOURCE="FP-1">Sweden.</FP> <FP SOURCE="FP-1">Taiwan.</FP> <FP SOURCE="FP-1">Union of Soviet Socialist Republics.</FP> <FP SOURCE="FP-1">United Arab Emirates.</FP> <FP SOURCE="FP-1">United Kingdom (including The Cayman Islands and Hong Kong).</FP> <FP SOURCE="FP-1">Vanuatu, Republic of.</FP> <FP SOURCE="FP-1">Yugoslavia, Socialist Federal Republic of.</FP> <FP SOURCE="FP-1">*See also Taiwan.</FP> </EXTRACT> <P>(2) The following nations have been found to extend similar reciprocal <PRTPAGE P="67"/>privileges in respect to the other articles mentioned in paragraph (a) of this section: </P> <EXTRACT> <FP SOURCE="FP-1">Antigua and Barbuda.</FP> <FP SOURCE="FP-1">Australia.</FP> <FP SOURCE="FP-1">Austria.</FP> <FP SOURCE="FP-1">Bahamas, The.</FP> <FP SOURCE="FP-1">Bahrain</FP> <FP SOURCE="FP-1">Belgium.</FP> <FP SOURCE="FP-1">Bermuda.</FP> <FP SOURCE="FP-1">Brazil.</FP> <FP SOURCE="FP-1">Chile.</FP> <FP SOURCE="FP-1">Colombia.</FP> <FP SOURCE="FP-1">Denmark.</FP> <FP SOURCE="FP-1">Federal Republic of Germany.</FP> <FP SOURCE="FP-1">Finland.</FP> <FP SOURCE="FP-1">France.</FP> <FP SOURCE="FP-1">Greece.</FP> <FP SOURCE="FP-1">Guatemala.</FP> <FP SOURCE="FP-1">Iceland.</FP> <FP SOURCE="FP-1">India.</FP> <FP SOURCE="FP-1">Ireland.</FP> <FP SOURCE="FP-1">Israel.</FP> <FP SOURCE="FP-1">Italy.</FP> <FP SOURCE="FP-1">Ivory Coast.</FP> <FP SOURCE="FP-1">Kuwait.</FP> <FP SOURCE="FP-1">Liberia.</FP> <FP SOURCE="FP-1">Luxembourg.</FP> <FP SOURCE="FP-1">Malta.</FP> <FP SOURCE="FP-1">Mexico.</FP> <FP SOURCE="FP-1">Netherlands.</FP> <FP SOURCE="FP-1">Netherlands Antilles.</FP> <FP SOURCE="FP-1">Norway.</FP> <FP SOURCE="FP-1">Polish People's Republic.</FP> <FP SOURCE="FP-1">Portugal.</FP> <FP SOURCE="FP-1">Republic of Korea.</FP> <FP SOURCE="FP-1">Republic of Panama.</FP> <FP SOURCE="FP-1">Republic of Singapore.</FP> <FP SOURCE="FP-1">Republic of Zaire.</FP> <FP SOURCE="FP-1">St. Vincent and the Grenadines.</FP> <FP SOURCE="FP-1">South Africa.</FP> <FP SOURCE="FP-1">Spain.</FP> <FP SOURCE="FP-1">Sweden.</FP> <FP SOURCE="FP-1">Taiwan.</FP> <FP SOURCE="FP-1">Union of Soviet Socialist Republics.</FP> <FP SOURCE="FP-1">United Arab Emirates.</FP> <FP SOURCE="FP-1">United Kingdom (including The Cayman Islands and Hong Kong).</FP> <FP SOURCE="FP-1">Vanuatu, Republic of.</FP> </EXTRACT> <P>(c) Any Cargo Declaration, Customs Form 1302, required to be filed under this part by any foreign vessel shall describe any article mentioned in paragraph (a) of this section laden aboard and transported from one United States port to another, giving its identifying number or symbol, if any, or such other identifying data as may be appropriate, the names of the shipper and consignee, and the destination. The Cargo Declaration shall also include a statement (1) that the articles specified in paragraph (a)(1) of this section are owned or leased by the owner or operator of the transporting vessel and are transported for his use in handing his cargo in foreign trade; or (2) that the stevedoring equipment and material specified in paragraph (a)(2) of this section is owned or leased by the owner or operator of the transporting vessel, or is owned or leased by the stevedoring company contracting for the lading or unlading of that vessel, and is transported without charge for his use in handling his cargo in foreign trade. If the director of the port of lading is satisfied that there will be sufficient control over the coastwise transportation of the article without identifying it by number or symbol or such other identifying data on the Cargo Declaration, he may permit the use of a Cargo Declaration that does not include such information provided the Cargo Declaration includes a statement, that the director of the port of unlading will be presented with a statement at the time of entry of the vessel that will list the identifying number or symbol or other appropriate identifying data for the article to be unladen at that port. Applicable penalties under section 584, Tariff Act of 1930, as amended (19 U.S.C. 1584), shall be assessed for violation of this paragraph.</P> <CITA>[T.D. 68-302, 33 FR 18436, Dec. 12, 1968]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 4.93, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">General</HD> <SECTION> <SECTNO>§ 4.94</SECTNO> <SUBJECT>Yacht privileges and obligations.</SUBJECT> <P>(a) Any documented vessel with a pleasure license endorsement, as well as any undocumented American pleasure vessel, shall be used exclusively for pleasure and shall not transport merchandise nor carry passengers for pay. Such a vessel which is not engaged in any trade nor in any way violating the Customs or navigation laws of the U.S. may proceed from port to port in the U.S. or to foreign ports without clearing and is not subject to entry upon its arrival in a port of the U.S., provided it has not visited a hovering vessel, received merchandise while in the customs waters beyond the territorial sea, or received merchandise while on the <PRTPAGE P="68"/>high seas. Such a vessel shall immediately report arrival to Customs when arriving in any port or place within the U.S., including the U.S. Virgin Islands, from a foreign port or place.</P> <P>(b) A cruising license may be issued to a yacht of a foreign country only if it has been made to appear to the satisfaction of the Secretary of the Treasury that yachts of the United States are allowed to arrive at and depart from ports in such foreign country and to cruise in the waters of such ports without entering or clearing at the customhouse thereof and without the payment of any charges for entering or clearing, dues, duty per ton, tonnage, taxes, or charges for cruising licenses. It has been made to appear to the satisfaction of the Secretary of the Treasury that yachts of the United States are granted such privileges in the following countries: </P> <EXTRACT> <FP SOURCE="FP-1">Argentina.</FP> <FP SOURCE="FP-1">Australia.</FP> <FP SOURCE="FP-1">Austria.</FP> <FP SOURCE="FP-1">Bahama Islands.</FP> <FP SOURCE="FP-1">Belgium.</FP> <FP SOURCE="FP-1">Bermuda.</FP> <FP SOURCE="FP-1">Canada.</FP> <FP SOURCE="FP-1">Denmark.</FP> <FP SOURCE="FP-1">Finland.</FP> <FP SOURCE="FP-1">France.</FP> <FP SOURCE="FP-1">Germany, Federal Republic of.</FP> <FP SOURCE="FP-1">Great Britain (including Turks and Caicos Islands; St. Vincent (including the territorial waters of the Northern Grenadine Islands), the Cayman Islands, the St. Christopher - Nevis - Anguilla Islands and the British Virgin Islands).</FP> <FP SOURCE="FP-1">Greece.</FP> <FP SOURCE="FP-1">Honduras.</FP> <FP SOURCE="FP-1">Ireland.</FP> <FP SOURCE="FP-1">Italy.</FP> <FP SOURCE="FP-1">Jamaica.</FP> <FP SOURCE="FP-1">Liberia.</FP> <FP SOURCE="FP-1">Marshall Islands.</FP> <FP SOURCE="FP-1">Netherlands.</FP> <FP SOURCE="FP-1">New Zealand.</FP> <FP SOURCE="FP-1">Norway.</FP> <FP SOURCE="FP-1">Sweden.</FP> <FP SOURCE="FP-1">Switzerland.</FP> <FP SOURCE="FP-1">Turkey.</FP> </EXTRACT> <P>(c) In order to obtain a cruising license for a yacht of any country listed in paragraph (b) of this section, there shall be filed with the port director an application therefor executed by either the yacht owner or the master which shall set forth the owner's name and address and identify the vessel by flag, rig, name, and such other matters as are usually descriptive of a vessel. The application shall also include a description of the waters in which the yacht will cruise, and a statement of the probable time it will remain in such waters. Upon approval of the application, the port director will issue a cruising license in the form prescribed by paragraph (d) of this section permitting the yacht, for a stated period not to exceed one year, to arrive and depart from the United States and to cruise in specified waters of the United States without entering and clearing, without filing manifests and obtaining or delivering permits to proceed, and without the payment of entrance and clearance fees, or fees for receiving manifests and granting permits to proceed, duty on tonnage, tonnage tax, or light money. The license shall be granted subject to the condition that the vessel shall not engage in trade or violate the laws of the United States in any respect. Upon the vessel's arrival at any port or place within the U.S. or the U.S. Virgin Islands, the master shall comply with 19 U.S.C. 1433 by immediately reporting arrival at the nearest Customs facility or other place designated by the port director. Individuals shall remain on board until directed otherwise by the appropriate Customs officer, as provided in 19 U.S.C. 1459.</P> <P>(d) Cruising licenses shall be in the following form:</P> <EXTRACT> <HD SOURCE="HD1">License To Cruise in the Waters of the United States</HD> <FP>To Port Directors:</FP> <P>For a period of ____ from ____(Date) the ____(Flag) ____ (Rig) yacht ____(Name) belonging to ________ of (Owner's name) ________(Address) shall be permitted to arrive at and depart from the United States and to cruise in the waters of the Customs port of</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Name of port or ports)</P> <FP>without entering and clearing, without filing manifests and obtaining or delivering permits to proceed, and without the payment of entry and clearance fees, or fees for receiving manifests and granting permits to proceed, duty on tonnage, tonnage tax, or light money.</FP> <P>This license is granted subject to the condition that the yacht named herein shall not engage in trade or violate the laws of the United States in any respect. Upon arrival at each port or place in the United States, the <PRTPAGE P="69"/>master shall report the fact of arrival to the Customs officer at the nearest customhouse. Such report shall be immediately made.</P> <P>Issued this __ day of ____, 19_</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FRP">(Port Director of Customs)</FP> <P> <E T="04">Warning:</E> This vessel is dutiable:</P> <P>(1) If owned by a resident of the United States (including Puerto Rico), or brought into the United States (including Puerto Rico), for sale or charter to a resident thereof, or</P> <P>(2) If brought into the United States (including Puerto Rico) by a nonresident free of duty as part of personal effects and sold or chartered within one year from date of entry.</P> <P>Any offer to sell or charter (for example, a listing with yacht brokers or agents) is considered evidence that the vessel was brought in for sale or charter to a resident or, if made within one year of entry of a vessel brought in free of duty as personal effects, that the vessel no longer is for the personal use of the non-resident.</P> <P>If the vessel is sold or chartered, or offered for sale or charter, in the circumstances described, without the owner first having filed a consumption entry and having paid duty, the vessel may be subject to seizure or to a monetary claim equal to the value of the vessel. See Chapter 89, Additional U.S. Note 1, HTSUS, and subheadings 8903.10, 8903.91, 8903.92, 8903.99.10, 8903.99.20, and 8903.99.90, HTSUS.</P> </EXTRACT> <P>(e) A foreign-flag yacht which is not in possession of a cruising license shall be required to comply with the laws applicable to foreign vessels arriving at, departing from, and proceeding between ports of the United States.</P> <CITA>[T.D. 69-266, 34 FR 20423, Dec. 31, 1969]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 4.94, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 4.94a</SECTNO> <SUBJECT>Large yachts imported for sale.</SUBJECT> <P>(a) <E T="03">General.</E> An otherwise dutiable vessel used primarily for recreation or pleasure and exceeding 79 feet in length that has been previously sold by a manufacturer or dealer to a retail consumer and that is imported with the intention to offer for sale at a boat show in the United States may qualify at the time of importation for a deferral of entry completion and deposit of duty. The following requirements and conditions will apply in connection with a deferral of entry completion and duty deposit under this section:</P> <P>(1) The importer of record must certify to Customs in writing that the vessel is being imported pursuant to 19 U.S.C. 1484b for sale at a boat show in the United States;</P> <P>(2) The certification referred to in paragraph (a)(1) of this section must be accompanied by the posting of a single entry bond containing the terms and conditions set forth in appendix C of part 113 of this chapter. The bond will have a duration of 6 months after the date of importation of the vessel, and no extensions of the bond period will be allowed;</P> <P>(3) The filing of the certification and the posting of the bond in accordance with this section will permit Customs to determine whether the vessel may be released;</P> <P>(4) All subsequent transactions with Customs involving the vessel in question, including any transaction referred to in paragraphs (b) through (d) of this section, must be carried out in the same port of entry in which the certification was filed and the bond was posted under this section; and</P> <P>(5) The vessel in question will not be eligible for issuance of a cruising license under § 4.94 and must comply with the laws respecting vessel entry and clearance when moving between ports of entry during the 6-month bond period prescribed under this section.</P> <P>(b) <E T="03">Exportation within 6-month period.</E> If a vessel for which entry completion and duty payment are deferred under paragraph (a) of this section is not sold but is exported within the 6-month bond period specified in paragraph (a)(2) of this section, the importer of record must inform Customs in writing of that fact within 30 calendar days after the date of exportation. The bond posted with Customs will be returned to the importer of record and no entry completion and duty payment will be required. The exported vessel will be precluded from reentry under the terms of paragraph (a) of this section for a period of 3 months after the date of exportation.</P> <P>(c) <E T="03">Sale within 6-month period.</E> If the sale of a vessel for which entry completion and duty payment are deferred under paragraph (a) of this section is completed within the 6-month bond period specified in paragraph (a)(2) of this <PRTPAGE P="70"/>section, the importer of record within 15 calendar days after completion of the sale must complete the entry by filing an Entry Summary (Customs Form 7501) and must deposit the appropriate duty (calculated at the applicable rates provided for under subheading 8903.91.00 or 8903.92.00 of the Harmonized Tariff Schedule of the United States and based upon the value of the vessel at the time of importation). Upon entry completion and deposit of duty under this paragraph, the bond posted with Customs will be returned to the importer of record.</P> <P>(d) <E T="03">Expiration of bond period.</E> If the 6-month bond period specified in paragraph (a)(2) of this section expires without either the completed sale or the exportation of a vessel for which entry completion and duty payment are deferred under paragraph (a) of this section, the importer of record within 15 calendar days after expiration of that 6-month period must complete the entry by filing an Entry Summary (Customs Form 7501) and must deposit the appropriate duty (calculated at the applicable rates provided for under subheading 8903.91.00 or 8903.92.00 of the Harmonized Tariff Schedule of the United States and based upon the value of the vessel at the time of importation). Upon entry completion and deposit of duty under this paragraph, the bond posted with Customs will be returned to the importer of record, and a new bond on Customs Form 301, containing the bond conditions set forth in §113.62 of this chapter, may be required by the appropriate port director.</P> <CITA>[68 FR 13625, Mar. 20, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.95</SECTNO> <SUBJECT>Records of entry and clearance of vessels.</SUBJECT> <P>Permanent records shall be prepared at each customhouse of all entries of vessels on Customs Form 1400 and of all clearances and permits to proceed on Customs Form 1401. Whenever a vessel is diverted, as provided for in § 4.91 (a) or (b), Customs Form 1401 shall be amended to show the new destination. These records shall be open to public inspection.</P> <CITA>[T.D. 82-224, 47 FR 53727, Nov. 29, 1982]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.96</SECTNO> <SUBJECT>Fisheries.</SUBJECT> <P>(a) As used in this section:</P> <P>(1) The term “convention vessel” means a Canadian fishing vessel which, at the time of its arrival in the United States, is engaged only in the North Pacific halibut fishery and which is therefore entitled to the privileges provided for by the Halibut Fishing Vessels Convention between the United States and Canada signed at Ottawa, Canada, on March 24, 1950 (T.D. 52862);</P> <P>(2) The term “nonconvention fishing vessel” means any vessel other than a convention vessel which is employed in whole or in part in fishing at the time of its arrival in the United States and</P> <P>(i) Which is documented under the laws of a foreign county,</P> <P>(ii) Which is undocumented, of 5 net tons or over, and owned in whole or in part by a person other than a citizen of the United States, or</P> <P>(iii) Which is undocumented, of less than 5 net tons, and owned in whole or in part by a person who is neither a citizen nor a resident of the United States;</P> <P>(3) The term “nonconvention cargo vessel” means any vessel which is not employed in fishing at the time of its arrival in the United States, but which is engaged in whole or in part in the transportation of fish or fish products <SU>131a</SU> <FTREF/> and</P> <FTNT> <P> <SU>131a</SU> Except as otherwise provided by treaty or convention to which the United States is a party, no foreign-flag vessel shall, whether documented as a cargo vessel or otherwise, land in a port of the United States its catch of fish taken on board such vessels on the high seas or fish products processed therefrom, or any fish or fish products taken on board such vessel on the high seas from a vessel engaged in fishing operations or in the processing of fish or fish products.” (46 U.S.C. 251)</P> <P> <SU>132</SU> [Reserved]</P> </FTNT> <P>(i) Which is documented under the laws of a foreign country or</P> <P>(ii) Which is undocumented and owned by a person other than a citizen of the United States;</P> <P>(4) The term “treaty vessel” means a Canadian fishing vessel which at the time of its arrival in the United States is engaged in the albacore tuna fishery and which is therefore entitled to the privileges provided for by the treaty <PRTPAGE P="71"/>with Canada on Pacific Coast Albacore Tuna Vessels and Port Privileges, entered into force at Ottawa, Canada, on July 29, 1981 (T.D. 81-227); and</P> <P>(5) The term “fishing” means the planting, cultivation, or taking of fish, shell fish, marine animals, pearls, shells, or marine vegetation, or the transportation of any of those marine products to the United States by the taking vessel or another vessel under the complete control and management of a common owner or bareboat charterer.</P> <P>(b) Except as otherwise provided by treaty or convention to which the United States is a party (see paragraphs (d) and (g) of this section), no foreign-flag vessel shall, whether documented as a cargo vessel or otherwise, land in a port of the United States its catch of fish taken on board such vessel on the high seas or fish products processed therefrom, or any fish or fish products taken on board such vessel on the high seas from a vessel engaged in fishing operations or in the processing of fish or fish products. (46 U.S.C. 251). This prohibition applies regardless of the intended ultimate disposition of the fish or fish products (e.g., it applies to transshipments from the foreign vessel to another vessel in United States territorial waters; it applies to landing for transshipment in bond to Canada or Mexico; it applies to landing for exportation under bond; and it applies to landing in a Foreign Trade Zone). However, the prohibition is limited to fish, or fish products processed therefrom, taken on board the foreign vessel on the high seas.</P> <P>(c) A vessel of the United States to be employed in the fisheries must have a Certificate of Documentation endorsed with a fishery license. “Fisheries” includes processing, storing, transporting (except in foreign commerce), planting, cultivating, catching, taking, or harvesting fish, shellfish, marine animals, pearls, shells, or marine vegetation in the navigable waters of the United States or the exclusive economic zone.</P> <P>(d) A convention vessel may come into a port of entry on the Pacific coast of the United States, including Alaska, to land its catch of halibut and incidentally-caught sable fish, or to secure supplies, equipment, or repairs. Such a vessel may come into any other port of entry or, if properly authorized to do so under § 101.4(b) of this chapter, into any place other than a port of entry, for the purpose of securing supplies, equipment, or repairs only, but shall not land its catch. A convention vessel which comes into the United States as provided for in this paragraph shall comply with the usual requirements applicable to foreign vessels arriving at and departing from ports of the United States.</P> <P>(e) A nonconvention fishing vessel, other than a treaty vessel, may come into a port of entry in the United States or, if granted permission under § 101.4(b) of this chapter, into a place other than a port of entry for the purpose of securing supplies, equipment, or repairs, but shall not land its catch. A nonconvention fishing vessel which comes into the United States as provided for in this paragraph shall comply with the usual requirements applicable to foreign vessels arriving at and departing from ports of the United States.</P> <P>(f) A nonconvention cargo vessel, although not prohibited by law from coming into the United States, shall not be permitted to land in the United States its catch of fish taken on the high seas or any fish or fish products taken on board on the high seas from a vessel employed in fishing or in the processing of fish or fish products, but may land fish taken on board at any place other than the high seas upon compliance with the usual requirements. Before any such fish may be landed the master shall satisfy the port director that the fish were not taken on board on the high seas by presenting declarations of the master and two or more officers or members of the crew of the vessel, of whom the person next in authority to the master shall be one, or other evidence acceptable to the port director which establishes the place of lading to his satisfaction.</P> <P>(g) A treaty vessel may come into a port or place of the United States named in Annex B of the Treaty with Canada on Pacific Coast Albacore Tuna Vessels and Port Privileges to land its catch of albacore tuna, or to secure fuel, supplies, equipment and repairs. Such a vessel may come into any other <PRTPAGE P="72"/>port of entry or, if properly authorized to do so under § 101.4(b) of this chapter, into any place other than a port of entry, for the purpose of securing supplies, equipment, or repairs only, but shall not land its catch. A treaty vessel which comes into the United States as provided for in this paragraph shall comply with the usual requirements applicable to foreign vessels arriving at and departing from ports of the United States.</P> <P>(h) A convention vessel, a nonconvention fishing vessel, a nonconvention cargo vessel, or a treaty vessel, which arrives in the United States in distress shall be subject to the usual requirements applicable to foreign vessels arriving in distress. While in the United States, supplies, equipment, or repairs may be secured, but, except as specified in the next sentence, fish shall not be landed unless the vessel's master, or other authorized representative of the owner, shows to the satisfaction of the port director that it will not be possible, by the exercise of due diligence, for the vessel to transport its catch to a foreign port without spoilage, in which event the port director may allow the vessel upon compliance with all applicable requirements, to land, transship, or otherwise dispose of its catch. Nothing herein shall prevent, upon compliance with normal Customs procedures, a convention vessel arriving in distress from landing its catch of halibut and incidentally-caught sable fish at a port of entry on the Pacific coast, including Alaska; a foreign cargo vessel arriving in distress from landing its cargo of fish taken on board at any place not on the high seas; or a treaty vessel arriving in distress from landing its catch of albacore tuna at a port of entry on the Pacific coast, including Alaska.</P> <CITA>[T.D. 82-144, 47 FR 35182, Aug. 13, 1982, as amended by T.D. 83-214, 48 FR 46513, Oct. 13, 1983; T.D. 83-214, 48 FR 50075, Oct. 31, 1983; T.D. 93-12, 58 FR 13197, Mar. 10, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.97</SECTNO> <SUBJECT>Salvage vessels.</SUBJECT> <P>(a) Only a vessel of the United States, a numbered motorboat owned by a citizen, or a vessel operating within the purview of paragraph (d) or (e) of this section, shall engage in any salvage operation in territorial waters of the United States unless an application addressed to the Commissioner of Customs to use another specified vessel in a completely described operation has been granted. <SU>133</SU> <FTREF/> </P> <FTNT> <P> <SU>133</SU> “No foreign vessel shall, under penalty of forfeiture, engage in salvaging operations on the Atlantic or Pacific coast of the United States, in any portion of the Great Lakes or their connecting or tributary waters, including any portion of the Saint Lawrence River through which the international boundary line extends, or in territorial waters of the United States on the Gulf of Mexico, except when authorized by a treaty or in accordance with the provisions of section 725 of this title: <E T="03">Provided, however,</E> That if, on investigation, the Secretary of the Treasury is satisfied that no suitable vessel wholly owned by a person who is a citizen of the United States and documented under the laws of the United States or numbered pursuant to section 288 of this title, is available in any particular locality he may authorize the use of a foreign vessel or vessels in salvaging operations in that locality and no penalty shall be incurred for such authorized use.” (46 U.S.C. 316(d))</P> <P>“Nothing in this section shall be held or construed to prohibit or restrict any assistance to vessels or salvage operations authorized by Article II of the treaty between the United States and Great Britain `concerning reciprocal rights for United States and Canada in the conveyance of prisoners and wrecking and salvage' signed at Washington, May 18, 1908 (35 Stat. 2036), or by the treaty between the United States and Mexico `to facilitate assistance to and salvage of vessels in territorial waters,' signed at Mexico City, June 13, 1935 (49 Stat. 3359).” (46 U.S.C. 316(e))</P> </FTNT> <P>(b) Upon receipt of such an application, the Commissioner of Customs will cause an investigation to be made immediately to determine whether a suitable vessel of the United States or a suitable numbered motorboat owned by a citizen is available for the operation. If he finds that no such vessel is available and that the facts otherwise warrant favorable action, he will grant the application.</P> <P>(c) If the application is granted, the applicant shall make a full report of the operation as soon as possible to the director of the port nearest the place where the operation was conducted.</P> <P>(d) A Canadian vessel may engage in salvage operations on any vessel in any territorial waters of the United States in which Canadian vessels are permitted to conduct such operations by <PRTPAGE P="73"/>article II of the treaty between the United States and Great Britain signed on May 18, 1908, <SU>134</SU> <FTREF/> or by section 725, title 46, United States Code. <SU>135</SU> <FTREF/> If any such vessel engages in a salvage operation in territorial waters of the United States, the owner or master of the vessel shall make a full report of the operation as soon as possible to the director of the port nearest the place where the operation was conducted.</P> <FTNT> <P> <SU>134</SU> “The High Contracting Parties agree that vessels and wrecking appliances, either from the United States or from the Dominion of Canada, may salve any property wrecked and may render aid and assistance to any vessels wrecked, disabled or in distress in the waters or on the shores of the other country in that portion of the St. Lawrence River through which the International Boundary line extends, and, in Lake Ontario, Lake Erie, Lake St. Clair, Lake Huron, and Lake Superior, and in the Rivers Niagara, Detroit, St. Clair, and Ste. Marie, and the Canals at Sault Ste. Marie, and on the shores and in the waters of the other country along the Atlantic and Pacific Coasts within a distance of thirty miles from the International Boundary on such Coasts.</P> <P>“It is further agreed that such reciprocal wrecking and salvage privileges shall include all necessary towing incident thereto, and that nothing in the Customs, Coasting or other laws or regulations of either country shall restrict in any manner the salving operations of such vessels or wrecking appliances.</P> <P>“Vessels from either country employed in salving in the waters of the other shall, as soon as practicable afterwards, make full report at the nearest custom house of the country in whose waters such salving takes place.” (35 Stat. 2036)</P> </FTNT> <FTNT> <P> <SU>135</SU> “Canadian vessels and wrecking appurtenance may render aid and assistance to Canadian or other vessels and property wrecked, disabled, or in distress in the waters of the United States contiguous to the Dominion of Canada.</P> <P>“This section shall be construed to apply to the canal and improvement of the waters between Lake Erie and Lake Huron, and to the waters of the Saint Mary's River and Canal: * * *.” (46 U.S.C. 725)</P> <P>The waters of Lake Michigan are not contiguous to the Dominion of Canada within the meaning of this statute.</P> </FTNT> <P>(e) A Mexican vessel may engage in a salvage operation on a Mexican vessel in any territorial waters of the United States in which Mexican vessels are permitted to conduct such operations by the treaty between the United States and Mexico signed on June 13, 1935. <SU>136</SU> <FTREF/> </P> <FTNT> <P> <SU>136</SU> “The High Contracting Parties agree that vessels and rescue apparatus, public or private, of either country, may aid or assist vessels of their own nationality, including the passengers and crews thereof, which may be disabled or in distress on the shores or within the territorial waters of the other country within a radius of seven hundred and twenty nautical miles of the intersection of the International Boundary Line and the coast of the Pacific Ocean, or within a radius of two hundred nautical miles of the intersection of the International Boundary Line and the coast of the Gulf of Mexico.” (49 Stat. 3360)</P> </FTNT> <CITA>[28 FR 14596, Dec. 31, 1963, as amended by T.D. 69-266, 34 FR 20423, Dec. 31, 1969]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.98</SECTNO> <SUBJECT>Navigation fees.</SUBJECT> <P>(a)(1) The Customs Service shall publish a General Notice in the <E T="04">Federal Register</E> and Customs Bulletin periodically, setting forth a revised schedule of navigation fees for the following services:</P> <EXTRACT> <HD SOURCE="HD2">Fee No. and description of services</HD> <FP SOURCE="FP-2">1Entry of vessel, including American, from foreign port:</FP> <P>(a) Less than 100 net tons.</P> <P>(b) 100 net tons and over.</P> <FP SOURCE="FP-2">2Clearance of vessel, including American, to foreign port:</FP> <P>(a) Less than 100 net tons.</P> <P>(b) 100 net tons or over.</P> <FP SOURCE="FP-2">3Issuing permit to foreign vessel to proceed from port to port, and receiving manifest.</FP> <FP SOURCE="FP-2">4Receiving manifest of foreign vessel on arrival from another port, and granting a permit to unlade.</FP> <FP SOURCE="FP-2">5Receiving post entry.</FP> <FP SOURCE="FP-2">6[Reserved]</FP> <FP SOURCE="FP-2">7Certifying payment of tonnage tax for foreign vessels only.</FP> <FP SOURCE="FP-2">8Furnishing copy of official document, including certified outward foreign manifest, and others not elsewhere enumerated.</FP> </EXTRACT> <FP>The published revised fee schedule shall remain in effect until changed.</FP> <P>(2) The fees shall be calculated in accordance with § 24.17(d) Customs Regulations (19 CFR 24.17(d)), and be based upon the amount of time the average service requires of a Customs officer in the fifth step of GS-9.</P> <P>(3) The party requesting a vessel service described in paragraph (a)(1) of <PRTPAGE P="74"/>this section for which reimbursable overtime compensation is payable under 19 U.S.C. 267 or 19 U.S.C. 1451 and § 24.16 of this chapter shall pay only the applicable overtime charge, and not both the overtime charge and the fee specified in the fee schedule.</P> <P>(4) The revised fee schedule shall be made available to the public in Customs offices.</P> <P>(5) The respective fees shall be designated in correspondence and reports by the applicable fee number.</P> <P>(b) Fee 1 shall be collected at the first port of entry only. It shall not be collected from a vessel entering directly from a port in noncontiguous territory of the United States nor from one entering at a port on a northern, northeastern, or northwestern frontier otherwise than by sea.</P> <P>(c) Fee 2 shall be collected at the final port of departure from the United States. It shall be collected from a yacht or public vessel which obtains a clearance, but shall not be collected from a vessel clearing directly for a port in noncontiguous territory of the United States nor from one clearing from a port on the northern, northeastern, or northwestern frontier otherwise than by sea. It shall be collected only upon the first clearance each year of a vessel making regular daily trips between a port of the United States and a port in Canada wholly upon interior waters not navigable to the ocean.</P> <P>(d) Fee 3 shall be collected for granting a permit to a foreign vessel to proceed to another Customs port. It shall be collected from a foreign vessel clearing directly for a port in noncontiguous territory of the United States outside its Customs territory. This fee shall not be collected in the case of a foreign vessel proceeding on a voyage by sea from one port in the United States to another port via a foreign port. Only one fee shall be collected in case of simultaneous vessel transactions.</P> <P>(e) Fee 4 shall be collected for receiving the manifest of a foreign vessel arriving from another Customs port. It shall be collected from a foreign vessel entering directly from a port in noncontiguous territory of the United States outside its Customs territory. This fee shall not be collected in the case of a foreign vessel which arrives at one port in the United States from another port on a voyage by sea via a foreign port. Only one fee shall be collected in the case of simultaneous vessel transactions.</P> <P>(e-1) Fee 5 shall be collected from a foreign or American vessel at each port where the vessel is required to file a post entry in accordance with the provisions of § 4.12(a)(3). An original post entry may be supplemented by additional post entries in instances where items were omitted from the original post entry. A separate fee shall be collected for each supplemental post entry made to the original post entry.</P> <P>(f) [Reserved]</P> <P>(g) Fee 7 shall be collected from foreign vessels only.</P> <P>(h) Fee 8 shall be collected for each copy of any official document, whether certified or not, furnished to any person other than a Government officer.</P> <P>(i) Private and commercial vessels, and passengers aboard commercial vessels, may be subject to the payment of fees for services provided in connection with their arrival as set forth in § 24.22 of this chapter.</P> <P>(j) The loading or unloading of merchandise or passengers from a commercial vessel at a U.S. port may cause the harbor maintenance fee set forth in § 24.24 of this chapter to be assessed.</P> <CITA>[T.D. 69-266, 34 FR 20423, Dec. 31, 1969, as amended by T.D. 74-194, 39 FR 26153, July 17, 1974; T.D. 80-25, 45 FR 3572, Jan. 18, 1980; T.D. 82-224, 47 FR 53727, Nov. 29, 1982; T.D. 84-149, 49 FR 28698, July 16, 1984; T.D. 86-109, 51 FR 21155, June 11, 1986; T.D. 87-44, 52 FR 10211, Mar. 30, 1987; T.D. 93-85, 58 FR 54282, Oct. 21, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.99</SECTNO> <SUBJECT>Forms; substitution.</SUBJECT> <P>(a) Customs Forms 1300, 1302, 1302-A, 1303, and 1304 printed by private parties or foreign governments shall be accepted provided the forms so printed:</P> <P>(1) Conform to the official Customs forms in wording arrangement, style, size of type, and paper specifications;</P> <P>(2) Conform to the official Customs forms in size, except that:</P> <P>(i) Each form may be printed on metric A4 size paper, 210 by 297 millimeters (approximately 8<FR>1/4</FR> by 11<FR>2/3</FR> inches).</P> <P>(ii) The vertical format of Customs Forms 1300, 1302-A, 1303, and 1304 may <PRTPAGE P="75"/>be increased in size up to a maximum of 14 inches.</P> <P>(iii) Customs Form 1302 may be reduced in size to not less than either 8<FR>1/2</FR> by 11 inches or 210 by 297 millimeters (metric A4 size). If Customs Form 1302 is reduced in size, the size of type used may be reduced proportionately.</P> <P>(b) If instructions are printed on the reverse side of the official Customs form, the instructions may be omitted from the privately printed forms, but the instructions shall be followed.</P> <P>(c) The port director, in his discretion, may accept a computer printout instead of Customs Form 1302 for use at a specific port. However, to ensure that computer printouts may be used at all ports, the private party or foreign government first must obtain specific approval from Headquarters, U.S. Customs Service.</P> <P>(d) Forms which do not comply with the requirements of this section are not acceptable without the specific approval of the Commissioner of Customs.</P> <CITA>[T.D. 79-255, 44 FR 57088, Oct. 4, 1979; T.D. 00-22, 65 FR 16517, Mar. 29, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.100</SECTNO> <SUBJECT>Licensing of vessels of less than 30 net tons.</SUBJECT> <P>(a) The application for a license to import merchandise in a vessel of less than 30 net tons in accordance with section 6, Anti-Smuggling Act of August 5, 1935, shall be addressed to the Secretary of the Treasury and delivered to the directors of the ports where foreign merchandise is to be imported in such vessel.</P> <P>(b) The application shall contain the following information:</P> <P>(1) Name of the vessel, rig, motive power, and home port.</P> <P>(2) Name and address of the owner.</P> <P>(3) Name and address of the master.</P> <P>(4) Net tonnage of the vessel.</P> <P>(5) Kind of merchandise to be imported.</P> <P>(6) Country or countries of exportation.</P> <P>(7) Ports of the United States where the merchandise will be imported.</P> <P>(8) Whether the vessel will be used to transport and import merchandise from a hovering vessel.</P> <P>(9) Kind of document under which the vessel is operating.</P> <P>(c) If the port director finds that the applicant is a reputable person and that the revenue would not be jeopardized by the issuance of a license, he may issue the license for a period not to exceed 12 months, incorporating therein any special conditions he believes to be necessary or desirable, and deliver it to the licensee.</P> <P>(d) The master or owner shall keep the license on board the vessel at all times and exhibit it upon demand of any duly authorized officer of the United States. This license is personal to the licensee and is not transferable.</P> <P>(e) The Secretary of the Treasury or the port director at whose office the license was issued may revoke the license if any of its terms have been willfully or intentionally violated or for any other cause which may be considered prejudicial to the revenue or otherwise against the interest of the United States.</P> <CITA>[T.D. 72-211, 37 FR 16486, Aug. 15, 1972]</CITA> </SECTION> <SECTION> <SECTNO>§ 4.101</SECTNO> <SUBJECT>Prohibitions against Customs officers and employees.</SUBJECT> <P>No Customs officer or employee shall:</P> <P>(a) Own, in whole or in part, any vessel except a yacht or other pleasure boat;</P> <P>(b) Act as agent, attorney, or consignee for the owner or owners of any vessel, or of any cargo or lading on board the vessel; or</P> <P>(c) Import or be concerned directly or indirectly in the importation of any merchandise for sale into the United States</P> <CITA>[T.D. 78-394, 43 FR 49787, Oct. 25, 1978]</CITA> </SECTION> </SUBJGRP> </PART> <PART> <EAR>Pt. 7</EAR> <HD SOURCE="HED">PART 7—CUSTOMS RELATIONS WITH INSULAR POSSESSIONS AND GUANTANAMO BAY NAVAL STATION</HD> <CONTENTS> <SECHD>Sec.</SECHD> <SECTNO>7.1</SECTNO> <SUBJECT>Puerto Rico; spirits and wines withdrawn from warehouse for shipment to; duty on foreign-grown coffee.</SUBJECT> <SECTNO>7.2</SECTNO> <SUBJECT>Insular possessions of the United States other than Puerto Rico.</SUBJECT> <SECTNO>7.3</SECTNO> <SUBJECT>Duty-free treatment of goods imported from insular possessions of the United States other than Puerto Rico.</SUBJECT> <SECTNO>7.4</SECTNO> <SUBJECT>Watches and watch movements from U.S. insular possessions.<PRTPAGE P="76"/> </SUBJECT> <SECTNO>7.11</SECTNO> <SUBJECT>Guantanamo Bay Naval Station.</SUBJECT> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>19 U.S.C. 66, 1202 (General Note 23, Harmonized Tariff Schedule of the United States), 1623, 1624; 48 U.S.C. 1406i.</P> </AUTH> <SECTION> <SECTNO>§ 7.1</SECTNO> <SUBJECT>Puerto Rico; spirits and wines withdrawn from warehouse for shipment to; duty on foreign-grown coffee.</SUBJECT> <P>(a) When spirits and wines are withdrawn from a bonded manufacturing warehouse for shipment in bond to Puerto Rico pursuant to section 311, Tariff Act of 1930, as amended,<SU>1 2</SU> <FTREF/> the warehouse withdrawal shall contain on the face thereof a statement of the kind and quantity of all imported merchandise (in its condition as imported) and imported containers used in the manufacture and putting up of such spirits and wines. The duty assessed on the imported merchandise and containers so used, and their classification and value, shall be shown on the withdrawal in accordance with § 144.41 of this chapter. If no imported merchandise or containers have been used, the warehouse withdrawal shall bear an endorsement to that effect. (See §§ 191.105 and 191.106 of this chapter.)</P> <FTNT> <P> <SU>1</SU> [Reserved]</P> <P> <SU>2</SU> “* * * Distilled spirits and wines which are rectified in bonded manufacturing warehouses, class six, and distilled spirits which are reduced in proof and bottled in such warehouses, shall be deemed to have been manufactured within the meaning of this section and may be withdrawn as hereinbefore provided, and likewise for shipment in bond to Puerto Rico, subject to the provisions of this section, and under such regulations as the Secretary of the Treasury may prescribe, there to be withdrawn for consumption or be rewarehoused and subsequently withdrawn for consumption: <E T="03">Provided,</E> That upon withdrawal in Puerto Rico for consumption, the duties imposed by the customs laws of the United States shall be collected on all imported merchandise (in its condition as imported) and imported containers used in the manufacture and putting up of such spirits and wines in such warehouses: <E T="03">Provided further,</E> That no internal-revenue tax shall be imposed on distilled spirits and wines rectified in class six warehouses if such distilled spirits and wines are exported or shipped in accordance with the provisions of this section, * * *.” (Tariff Act of 1930, sec. 311, as amended; 19 U.S.C. 1311)</P> </FTNT> <P>(b) The spirits and wines shall be forwarded in accordance with the general provisions of the regulations governing the transportation of merchandise in bond, part 18 of this chapter.</P> <P>(c) A regular entry shall be made for all foreign-grown coffee shipped to Puerto Rico from the United States, but special Customs invoices shall not be required for such shipments. <SU>3</SU> <FTREF/> </P> <FTNT> <P> <SU>3</SU> Section 319, Tariff Act of 1930, authorizes the Legislature of Puerto Rico to impose a duty on coffee imported into Puerto Rico, including coffee grown in a foreign country coming into Puerto Rico from the United States, and the Legislature of Puerto Rico has imposed such a duty.</P> </FTNT> <SECAUTH>(Secs. 311, 319, 484(a), 46 Stat. 691, as amended, 696, 722, as amended; 19 U.S.C. 1311, 1319, 1484(a); R.S. 251, as amended, sec. 624, 46 Stat. 759 (19 U.S.C. 66, 1624))</SECAUTH> <CITA>[28 FR 14636, Dec. 31, 1963, as amended by T.D. 73-175, 38 FR 17445, July 2, 1973; T.D. 83-212, 48 FR 46770, Oct. 14, 1983; T.D. 98—16, 63 FR 11004, Mar. 5, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 7.2</SECTNO> <SUBJECT>Insular possessions of the United States other than Puerto Rico.</SUBJECT> <P>(a) Insular possessions of the United States other than Puerto Rico are also American territory but, because those insular possessions are outside the customs territory of the United States, goods imported therefrom are subject to the rates of duty set forth in column 1 of the Harmonized Tariff Schedule of the United States (HTSUS) except as otherwise provided in § 7.3 or in part 148 of this chapter. The principal such insular possessions are the U.S. Virgin Islands, Guam, American Samoa, Wake Island, Midway Islands, and Johnston Atoll. Pursuant to section 603(c) of the Covenant to Establish a Commonwealth of the Northern Mariana Islands in Political Union With the United States of America, Public Law 94-241, 90 Stat. 263, 270, goods imported from the Commonwealth of the Northern Mariana Islands are entitled to the same tariff treatment as imports from Guam and thus are also subject to the provisions of § 7.3 and of part 148 of this chapter.</P> <P>(b) Importations into Guam, American Samoa, Wake Island, Midway Islands, Johnston Atoll, and the Commonwealth of the Northern Mariana Islands are not governed by the Tariff Act of 1930, as amended, or the regulations contained in this chapter. The <PRTPAGE P="77"/>customs administration of Guam is under the Government of Guam. The customs administration of American Samoa is under the Government of American Samoa. The customs administration of Wake Island is under the jurisdiction of the Department of the Air Force (General Counsel). The customs administration of Midway Islands is under the jurisdiction of the Department of the Navy. There is no customs authority on Johnston Atoll, which is under the operational control of the Defense Nuclear Agency. The customs administration of the Commonwealth of the Northern Mariana Islands is under the Government of the Commonwealth.</P> <P>(c) The Secretary of the Treasury administers the customs laws of the U.S. Virgin Islands through the United States Customs Service. The importation of goods into the U.S. Virgin Islands is governed by Virgin Islands law; however, in situations where there is no applicable Virgin Islands law or no U.S. law specifically made applicable to the Virgin Islands, U.S. laws and regulations shall be used as a guide and be complied with as nearly as possible. Tariff classification of, and rates of duty applicable to, goods imported into the U.S. Virgin Islands are established by the Virgin Islands legislature.</P> <CITA>[T.D. 97-75, 62 FR 46439, Sept. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 7.3</SECTNO> <SUBJECT>Duty-free treatment of goods imported from insular possessions of the United States other than Puerto Rico.</SUBJECT> <P>(a) <E T="03">General.</E> Under the provisions of General Note 3(a)(iv), Harmonized Tariff Schedule of the United States (HTSUS), the following goods may be eligible for duty-free treatment when imported into the customs territory of the United States from an insular possession of the United States:</P> <P>(1) Except as provided in Additional U.S. Note 5 to Chapter 91, HTSUS, and except as provided in Additional U.S. Note 2 to Chapter 96, HTSUS, and except as provided in section 423 of the Tax Reform Act of 1986, as amended (19 U.S.C. 2703 note), goods which are the growth or product of any such insular possession, and goods which were manufactured or produced in any such insular possession from materials that were the growth, product or manufacture of any such insular possession or of the customs territory of the United States, or of both, provided that such goods:</P> <P>(i) Do not contain foreign materials valued at either more than 70 percent of the total value of the goods or, in the case of goods described in section 213(b) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)), more than 50 percent of the total value of the goods; and</P> <P>(ii) Come to the customs territory of the United States directly from any such insular possession; and</P> <P>(2) Goods previously imported into the customs territory of the United States with payment of all applicable duties and taxes imposed upon or by reason of importation, provided that:</P> <P>(i) The goods were shipped from the United States directly to the insular possession and are returned from the insular possession to the United States by direct shipment; and</P> <P>(ii) There was no remission, refund or drawback of such duties or taxes in connection with the shipment of the goods from the United States to the insular possession.</P> <P>(b) <E T="03">Origin of goods.</E> For purposes of this section, goods shall be considered to be the growth or product of, or manufactured or produced in, an insular possession if:</P> <P>(1) The goods are wholly the growth or product of the insular possession; or</P> <P>(2) The goods became a new and different article of commerce as a result of production or manufacture performed in the insular possession.</P> <P>(c) <E T="03">Foreign materials.</E> For purposes of this section, the term “foreign materials” covers any material incorporated in goods described in paragraph (b)(2) of this section other than:</P> <P>(1) A material which was wholly the growth or product of an insular possession or of the customs territory of the United States;</P> <P>(2) A material which was substantially transformed in an insular possession or in the customs territory of the United States into a new and different article of commerce which was then used in an insular possession in the production or manufacture of a new and different article which is shipped directly to the United States; or<PRTPAGE P="78"/> </P> <P>(3) A material which may be imported into the customs territory of the United States from a foreign country and entered free of duty either:</P> <P>(i) At the time the goods which incorporate the material are entered; or</P> <P>(ii) At the time the material is imported into the insular possession, provided that the material was incorporated into the goods during the 18-month period after the date on which the material was imported into the insular possession.</P> <P>(d) <E T="03">Foreign materials value limitation.</E> For purposes of this section, the determination of whether goods contain foreign materials valued at more than 70 or 50 percent of the total value of the goods shall be made based on a comparison between:</P> <P>(1) The landed cost of the foreign materials, consisting of:</P> <P>(i) The manufacturer's actual cost for the materials or, where a material is provided to the manufacturer without charge or at less than fair market value, the sum of all expenses incurred in the growth, production, or manufacture of the material, including general expenses, plus an amount for profit; and</P> <P>(ii) The cost of transporting those materials to the insular possession, but excluding any duties or taxes assessed on the materials by the insular possession and any charges which may accrue after landing; and</P> <P>(2) The final appraised value of the goods imported into the customs territory of the United States, as determined in accordance with section 402 of the Tariff Act of 1930, as amended (19 U.S.C. 1401a).</P> <P>(e) <E T="03">Direct shipment</E>—(1) <E T="03">General.</E> For purposes of this section, goods shall be considered to come to the United States directly from an insular possession, or to be shipped from the United States directly to an insular possession and returned from the insular possession to the United States by direct shipment, only if:</P> <P>(i) The goods proceed directly to or from the insular possession without passing through any foreign territory or country;</P> <P>(ii) The goods proceed to or from the insular possession through a foreign territory or country, the goods do not enter into the commerce of the foreign territory or country while en route to the insular possession or the United States, and the invoices, bills of lading, and other shipping documents show the insular possession or the United States as the final destination; or</P> <P>(iii) The goods proceed to or from the insular possession through a foreign territory or country, the invoices and other shipping documents do not show the insular possession or the United States as the final destination, and the goods:</P> <P>(A) Remained under the control of the customs authority of the foreign territory or country;</P> <P>(B) Did not enter into the commerce of the foreign territory or country except for the purpose of sale other than at retail, and the port director is satisfied that the importation into the insular possession or the United States results from the original commercial transaction between the importer and the producer or the latter's sales agent; and</P> <P>(C) Were not subjected to operations in the foreign territory or country other than loading and unloading and other activities necessary to preserve the goods in good condition.</P> <P>(2) <E T="03">Evidence of direct shipment.</E> The port director may require that appropriate shipping papers, invoices, or other documents be submitted within 60 days of the date of entry as evidence that the goods were shipped to the United States directly from an insular possession or shipped from the United States directly to an insular possession and returned from the insular possession to the United States by direct shipment within the meaning of paragraph (e)(1) of this section, and such evidence of direct shipment shall be subject to such verification as deemed necessary by the port director. Evidence of direct shipment shall not be required when the port director is otherwise satisfied, taking into consideration the kind and value of the merchandise, that the goods qualify for duty-free treatment under General Note 3(a)(iv), HTSUS, and paragraph (a) of this section.</P> <P>(f) <E T="03">Documentation.</E> (1) When goods are sought to be admitted free of duty as <PRTPAGE P="79"/>provided in paragraph (a)(1) of this section, there shall be filed with the entry/entry summary a properly completed certificate of origin on Customs Form 3229, signed by the chief or assistant chief customs officer or other official responsible for customs administration at the port of shipment, showing that the goods comply with the requirements for duty-free entry set forth in paragraph (a)(1) of this section. Except in the case of goods which incorporate a material described in paragraph (c)(3)(ii) of this section, a certificate of origin shall not be required for any shipment eligible for informal entry under § 143.21 of this chapter or in any case where the port director is otherwise satisfied that the goods qualify for duty-free treatment under paragraph (a)(1) of this section.</P> <P>(2) When goods in a shipment not eligible for informal entry under § 143.21 of this chapter are sought to be admitted free of duty as provided in paragraph (a)(2) of this section, the following declarations shall be filed with the entry/entry summary unless the port director is satisfied by reason of the nature of the goods or otherwise that the goods qualify for such duty-free entry:</P> <P>(i) A declaration by the shipper in the insular possession in substantially the following form: </P> <EXTRACT> <P>I, __________ (name) of __________ (organization) do hereby declare that to the best of my knowledge and belief the goods identified below were sent directly from the United States on ______, 19__, to __________ (name) of __________ (organization) on __________ (insular possession) via the __________ (name of carrier) and that the goods remained in said insular possession until shipped by me directly to the United States via the __________ (name of carrier) on ______, 19__.</P> <GPOTABLE CDEF="s50,12,12,r50,12" COLS="5" OPTS="L2,i1"> <BOXHD> <CHED H="1">Marks</CHED> <CHED H="1">Numbers</CHED> <CHED H="1">Quantity</CHED> <CHED H="1">Description</CHED> <CHED H="1">Value</CHED> </BOXHD> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="22"/> </ROW> </GPOTABLE> <P>Dated at ________, this ____ day of ______, 19__.</P> <FP SOURCE="FP-DASH">Signature:</FP> </EXTRACT> <P>(ii) A declaration by the importer in the United States in substantially the following form: </P> <EXTRACT> <P>I, __________ (name), of __________ (organization) declare that the (above) (attached) declaration by the shipper in the insular possession is true and correct to the best of my knowledge and belief, that the goods in question were previously imported into the customs territory of the United States and were shipped to the insular possession from the United States without remission, refund or drawback of any duties or taxes paid in connection with that prior importation, and that the goods arrived in the United States directly from the insular possession via the __________ (name of carrier) on ______, 19__. </P> <FP SOURCE="FP-DASH"/> <FP>(Date)</FP> <FP SOURCE="FP-DASH"/> <FP>(Signature)</FP> </EXTRACT> <P>(g) <E T="03">Warehouse withdrawals; drawback.</E> Merchandise may be withdrawn from a bonded warehouse under section 557 of the Tariff Act of 1930, as amended (19 U.S.C. 1557), for shipment to any insular possession of the United States other than Puerto Rico without payment of duty, or with a refund of duty if the duties have been paid, in like manner as for exportation to foreign countries. No drawback may be allowed under section 313 of the Tariff Act of 1930, as amended (19 U.S.C. 1313), on goods manufactured or produced in the United States and shipped to any insular possession. No drawback of internal-revenue tax is allowable under 19 U.S.C. 1313 on goods manufactured or produced in the United States with the use of domestic tax-paid alcohol and shipped to Wake Island, Midway Islands or Johnston Atoll.</P> <CITA>[T.D. 97-75, 62 FR 46439, Sept. 3, 1997]</CITA> </SECTION> <SECTION> <PRTPAGE P="80"/> <SECTNO>§ 7.4</SECTNO> <SUBJECT>Watches and watch movements from U.S. insular possessions.</SUBJECT> <P>(a) The issuance of an International Trade Administration Form ITA-360, Certificate of Entitlement to Secure the Refund of Duties on Watches and Watch Movements, by the Department of Commerce, authorizes a producer of watches in the U.S. insular possessions to file requests with Customs for the refund of duties paid on imports of watches, watch movements (including solid state watches and watch movements), and watch parts (excepting separate watch cases and any articles containing any materials to which rates of duty set forth in Column 2, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) apply). The amount of the refund requested may be up to the value specified in the certificate, provided that the articles for which refunds are requested were entered during a 3-year period beginning 2 years before the date of issuance of the Form ITA-360 certificate from the Department of Commerce.</P> <P>(b) The Form ITA-360 may not be used to secure refunds. To secure a refund, the party requesting the refund of duties (claimant) must present to Customs Form ITA-361, Request for Refund of Duties on Watches and Watch Movements, properly executed, and authenticated by the Department of Commerce.</P> <P>(c) By completing Form ITA-361, the insular producer may either:</P> <P>(1) Transfer its entitlement, in whole or in part, to any other party for any consideration agreed to by the insular producer and the transferee, or</P> <P>(2) Request the refund of duties to itself.</P> <P>(d) A claimant must file Form ITA-361 with Customs at the same port where the watch import entry was originally filed and duties paid. The documentation accompanying Form ITA-361 shall include a copy of the import entry, providing proof that duty was paid on the watches and watch movements.</P> <P>(e) When requesting the refund of duties on Form ITA-361, the claimant also must complete and submit to Customs the declaration on the form which reads as follows: </P> <EXTRACT> <P>I declare that the information given above is true and correct to the best of my knowledge and belief; that no notices of exportation of articles with benefit of drawback were filed upon exportation of this merchandise from the United States; that no liquidated refunds on the articles relating to the present claim have been paid; and that no protest or request for litigation for refund of duties paid and herewith claimed has been made.</P> </EXTRACT> <P>(f) A fee of 1 percent will be deducted from each refund request as reimbursement to salaries and expenses of those Customs personnel processing the request.</P> <P>(g) Form ITA-360 expires 1 year from its date of issuance. Any refund request on Form ITA-361 made by either the insular producer itself or any transferee named on Form ITA-360 must be filed within this 1-year period. This expiration date applies equally to all refund requests, whether a single request for the entire amount specified in the Form ITA-361 certificate or multiple requests for partial amounts. Refund requests will be accepted until either the amount specified in the certificate is depleted or until the certificate expires 1 year from its date of issuance.</P> <P>(h) Customs will process only those refund requests made in accordance with the joint rules of the Departments of Commerce and the Interior governing the issuance and handling of certificates and the transfer of entitlements as contained in 15 CFR part 303.</P> <CITA>[T.D. 84-16, 49 FR 1481, Jan. 12, 1984, as amended by T.D. 84-211, 49 FR 39044, Oct. 3, 1984; T.D. 89-1, 53 FR 51252, Dec. 21, 1988. Redesignated and amended by T.D. 97-75, 62 FR 46441, Sept. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 7.11</SECTNO> <SUBJECT>Guantanamo Bay Naval Station.</SUBJECT> <P>Articles of foreign origin may enter the area (both land and water) of the Guantanamo Bay Naval Station free of duty, but such articles shall be subject to duty upon their subsequent entry into the United States.</P> <CITA>[28 FR 14636, Dec. 31, 1963]</CITA> </SECTION> </PART> <PART> <PRTPAGE P="81"/> <EAR>Pt. 10</EAR> <HD SOURCE="HED">PART 10—ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC.</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—General Provisions</HD> <SUBJGRP> <HD SOURCE="HED">Articles Exported and Returned</HD> <SECHD>Sec.</SECHD> <SECTNO>10.1</SECTNO> <SUBJECT>Domestic products; requirements on entry.</SUBJECT> <SECTNO>10.3</SECTNO> <SUBJECT>Drawback; internal-revenue tax.</SUBJECT> <SECTNO>10.4</SECTNO> <SUBJECT>Internal-revenue marks; erasure.</SUBJECT> <SECTNO>10.5</SECTNO> <SUBJECT>Shooks and staves; cloth boards; port director's account.</SUBJECT> <SECTNO>10.6</SECTNO> <SUBJECT>Shooks and staves; claim for duty exemption.</SUBJECT> <SECTNO>10.7</SECTNO> <SUBJECT>Substantial containers or holders.</SUBJECT> <SECTNO>10.8</SECTNO> <SUBJECT>Articles exported for repairs or alterations.</SUBJECT> <SECTNO>10.8a</SECTNO> <SUBJECT>Imported articles exported and reimported.</SUBJECT> <SECTNO>10.9</SECTNO> <SUBJECT>Articles exported for processing.</SUBJECT> <SECTNO>10.10</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Articles Assembled Abroad With United States Components</HD> <SECTNO>10.11</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>10.12</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.13</SECTNO> <SUBJECT>Statutory provision: Subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202).</SUBJECT> <SECTNO>10.14</SECTNO> <SUBJECT>Fabricated components subject to the exemption.</SUBJECT> <SECTNO>10.15</SECTNO> <SUBJECT>Fabricated components not subject to the exemption.</SUBJECT> <SECTNO>10.16</SECTNO> <SUBJECT>Assembly abroad.</SUBJECT> <SECTNO>10.17</SECTNO> <SUBJECT>Valuation of exempted components.</SUBJECT> <SECTNO>10.18</SECTNO> <SUBJECT>Valuation of assembled articles.</SUBJECT> <SECTNO>10.19-10.20</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>10.21</SECTNO> <SUBJECT>Updating cost data and other information.</SUBJECT> <SECTNO>10.23</SECTNO> <SUBJECT>Standards, quotas, and visas.</SUBJECT> <SECTNO>10.24</SECTNO> <SUBJECT>Documentation.</SUBJECT> <SECTNO>10.25</SECTNO> <SUBJECT>Textile components cut to shape in the United States and assembled abroad.</SUBJECT> <SECTNO>10.26</SECTNO> <SUBJECT>Articles assembled or processed in a beneficiary country in whole of U.S. components or ingredients; articles assembled in a beneficiary country from textile components cut to shape in the United States.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Free Entry—Articles for the Use of Foreign Military Personnel</HD> <SECTNO>10.30c</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Temporary Importations Under Bond</HD> <SECTNO>10.31</SECTNO> <SUBJECT>Entry; bond.</SUBJECT> <SECTNO>10.33</SECTNO> <SUBJECT>Theatrical effects.</SUBJECT> <SECTNO>10.35</SECTNO> <SUBJECT>Models of women's wearing apparel.</SUBJECT> <SECTNO>10.36</SECTNO> <SUBJECT>Commercial travelers' samples; professional equipment and tools of trade; theatrical effects and other articles.</SUBJECT> <SECTNO>10.36a</SECTNO> <SUBJECT>Vehicles, pleasure boats and aircraft brought in for repair or alteration.</SUBJECT> <SECTNO>10.37</SECTNO> <SUBJECT>Extension of time for exportation.</SUBJECT> <SECTNO>10.38</SECTNO> <SUBJECT>Exportation.</SUBJECT> <SECTNO>10.39</SECTNO> <SUBJECT>Cancellation of bond charges.</SUBJECT> <SECTNO>10.40</SECTNO> <SUBJECT>Refund of cash deposits.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">International Traffic</HD> <SECTNO>10.41</SECTNO> <SUBJECT>Instruments; exceptions.</SUBJECT> <SECTNO>10.41a</SECTNO> <SUBJECT>Lift vans, cargo vans, shipping tanks, skids, pallets, and similar instruments of international traffic; repair components.</SUBJECT> <SECTNO>10.41b</SECTNO> <SUBJECT>Clearance of serially numbered substantial holders or outer containers.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Articles for Institutions</HD> <SECTNO>10.43</SECTNO> <SUBJECT>Duty-free status.</SUBJECT> <SECTNO>10.46</SECTNO> <SUBJECT>Articles for the United States.</SUBJECT> <SECTNO>10.47</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Works of Art</HD> <SECTNO>10.48</SECTNO> <SUBJECT>Engravings, sculptures, etc.</SUBJECT> <SECTNO>10.49</SECTNO> <SUBJECT>Articles for exhibition; requirements on entry.</SUBJECT> <SECTNO>10.50</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>10.52</SECTNO> <SUBJECT>Painted, colored or stained glass windows for religious institutions.</SUBJECT> <SECTNO>10.53</SECTNO> <SUBJECT>Antiques.</SUBJECT> <SECTNO>10.54</SECTNO> <SUBJECT>Gobelin and other hand-woven tapestries.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Vegetable Oils</HD> <SECTNO>10.56</SECTNO> <SUBJECT>Vegetable oils, denaturing; release.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Potatoes, Corn, or Maize</HD> <SECTNO>10.57</SECTNO> <SUBJECT>Certified seed potatoes, and seed corn or maize.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Bolting Cloths</HD> <SECTNO>10.58</SECTNO> <SUBJECT>Bolting cloths; marking.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Withdrawal of Supplies and Equipment for Vessels</HD> <SECTNO>10.59</SECTNO> <SUBJECT>Exemption from customs duties and internal-revenue tax.</SUBJECT> <SECTNO>10.60</SECTNO> <SUBJECT>Forms of withdrawals; bond.</SUBJECT> <SECTNO>10.61</SECTNO> <SUBJECT>Withdrawal permit.</SUBJECT> <SECTNO>10.62</SECTNO> <SUBJECT>Bunker fuel oil.</SUBJECT> <SECTNO>10.62a</SECTNO> <SUBJECT>Blanket withdrawals for certain merchandise.</SUBJECT> <SECTNO>10.62b</SECTNO> <SUBJECT>Aircraft turbine fuel.</SUBJECT> <SECTNO>10.63</SECTNO> <SUBJECT>Landing of supplies and stores from receiving vessel in the United States.</SUBJECT> <SECTNO>10.64</SECTNO> <SUBJECT>Crediting or cancellation of bonds.</SUBJECT> <SECTNO>10.64a</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>10.65</SECTNO> <SUBJECT>Cigars and cigarettes.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Articles Exported for Exhibition, Etc.</HD> <SECTNO>10.66</SECTNO> <SUBJECT>Articles exported for temporary exhibition and returned; horses exported for horse racing and returned; procedure on entry.</SUBJECT> <SECTNO>10.67</SECTNO> <SUBJECT>Articles exported for scientific or educational purposes and returned; procedure on entry.</SUBJECT> </SUBJGRP> <SUBJGRP> <PRTPAGE P="82"/> <HD SOURCE="HED">Theatrical Effects, Motion-Picture Films, Commercial Travelers' Samples, and Tools of Trade</HD> <SECTNO>10.68</SECTNO> <SUBJECT>Procedure.</SUBJECT> <SECTNO>10.69</SECTNO> <SUBJECT>Samples to Great Britain and Ireland under reciprocal agreement.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Animals and Birds</HD> <SECTNO>10.70</SECTNO> <SUBJECT>Purebred animals for breeding purposes; certificate.</SUBJECT> <SECTNO>10.71</SECTNO> <SUBJECT>Purebred animals; bond for production of evidence; deposit of estimated duties; stipulation.</SUBJECT> <SECTNO>10.72-10.73</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>10.74</SECTNO> <SUBJECT>Animals straying across boundary for pasturage; offspring.</SUBJECT> <SECTNO>10.75</SECTNO> <SUBJECT>Wild animals and birds; zoological collections.</SUBJECT> <SECTNO>10.76</SECTNO> <SUBJECT>Game animals and birds.</SUBJECT> <SECTNO>10.77</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Products of American Fisheries</HD> <SECTNO>10.78</SECTNO> <SUBJECT>Entry.</SUBJECT> <SECTNO>10.79</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Salt for Curing Fish</HD> <SECTNO>10.80</SECTNO> <SUBJECT>Remission of duty; withdrawal; bond.</SUBJECT> <SECTNO>10.81</SECTNO> <SUBJECT>Use in any port.</SUBJECT> <SECTNO>10.82</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>10.83</SECTNO> <SUBJECT>Bond; cancellation; extension.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Automotive Products</HD> <SECTNO>10.84</SECTNO> <SUBJECT>Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Master Records, and Metal Matrices</HD> <SECTNO>10.90</SECTNO> <SUBJECT>Master records and metal matrices.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Prototypes</HD> <SECTNO>10.91</SECTNO> <SUBJECT>Prototypes used exclusively for product development and testing.</SUBJECT> <SECTNO>10.92-10.97</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Fluxing Material</HD> <SECTNO>10.98</SECTNO> <SUBJECT>Copper-bearing fluxing material.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Ethyl Alcohol</HD> <SECTNO>10.99</SECTNO> <SUBJECT>Importation of ethyl alcohol for nonbeverage purposes.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">United States Government Importations</HD> <SECTNO>10.100</SECTNO> <SUBJECT>Entry, examination, and tariff status.</SUBJECT> <SECTNO>10.101</SECTNO> <SUBJECT>Immediate delivery.</SUBJECT> <SECTNO>10.102</SECTNO> <SUBJECT>Duty-free entries.</SUBJECT> <SECTNO>10.103</SECTNO> <SUBJECT>American goods returned.</SUBJECT> <SECTNO>10.104</SECTNO> <SUBJECT>Temporary importation entries for United States Government agencies.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Wheat</HD> <SECTNO>10.106</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Rescue and Relief Work</HD> <SECTNO>10.107</SECTNO> <SUBJECT>Equipment and supplies; admission.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Products Exported Under Lease and Reimported</HD> <SECTNO>10.108</SECTNO> <SUBJECT>Entry of reimported articles exported under lease.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Strategic Materials Obtained by Barter or Exchange</HD> <SECTNO>10.110</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Late Filing of Free Entry and Reduced Duty Documents</HD> <SECTNO>10.112</SECTNO> <SUBJECT>Filing free entry documents or reduced duty documents after entry.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Instruments and Apparatus for Educational and Scientific Institutions</HD> <SECTNO>10.114</SECTNO> <SUBJECT>General provisions.</SUBJECT> <SECTNO>10.115-10.119</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Visual or Auditory Materials</HD> <SECTNO>10.121</SECTNO> <SUBJECT>Visual or auditory materials of an educational, scientific, or cultural character.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Rate of Duty Dependent Upon Actual Use</HD> <SECTNO>10.131</SECTNO> <SUBJECT>Circumstances in which applicable.</SUBJECT> <SECTNO>10.132</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>10.133</SECTNO> <SUBJECT>Conditions required to be met.</SUBJECT> <SECTNO>10.134</SECTNO> <SUBJECT>Declaration of intent.</SUBJECT> <SECTNO>10.135</SECTNO> <SUBJECT>Deposit of duties.</SUBJECT> <SECTNO>10.136</SECTNO> <SUBJECT>Suspension of liquidation.</SUBJECT> <SECTNO>10.137</SECTNO> <SUBJECT>Records of use.</SUBJECT> <SECTNO>10.138</SECTNO> <SUBJECT>Proof of use.</SUBJECT> <SECTNO>10.139</SECTNO> <SUBJECT>Liquidation.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Importations Not Over $200 and Bona Fide Gifts</HD> <SECTNO>10.151</SECTNO> <SUBJECT>Importations not over $200.</SUBJECT> <SECTNO>10.152</SECTNO> <SUBJECT>Bona-fide gifts.</SUBJECT> <SECTNO>10.153</SECTNO> <SUBJECT>Conditions for exemption.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Generalized System of Preferences</HD> <SECTNO>10.171</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>10.172</SECTNO> <SUBJECT>Claim for exemption from duty under the Generalized System of Preferences.</SUBJECT> <SECTNO>10.173</SECTNO> <SUBJECT>Evidence of country of origin.</SUBJECT> <SECTNO>10.174</SECTNO> <SUBJECT>Evidence of direct shipment.</SUBJECT> <SECTNO>10.175</SECTNO> <SUBJECT>Imported directly defined.</SUBJECT> <SECTNO>10.176</SECTNO> <SUBJECT>Country of origin criteria.</SUBJECT> <SECTNO>10.177</SECTNO> <SUBJECT>Cost or value of materials produced in the beneficiary developing country.</SUBJECT> <SECTNO>10.178</SECTNO> <SUBJECT>Direct costs of processing operations performed in the beneficiary developing country.</SUBJECT> <SECTNO>10.178a</SECTNO> <SUBJECT>Special duty-free treatment for sub-Saharan African countries.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Canadian Crude Petroleum</HD> <SECTNO>10.179</SECTNO> <SUBJECT>Canadian crude petroleum subject to a commercial exchange agreement between United States and Canadian refiners.</SUBJECT> </SUBJGRP> <SUBJGRP> <PRTPAGE P="83"/> <HD SOURCE="HED">Certain Fresh, Chilled, or Frozen Beef</HD> <SECTNO>10.180</SECTNO> <SUBJECT>Certification.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Watches and Watch Movements From U.S. Insular Possessions</HD> <SECTNO>10.181-10.182</SECTNO> <SUBJECT>[Reserved]</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Civil Aircraft</HD> <SECTNO>10.183</SECTNO> <SUBJECT>Duty-free entry of civil aircraft, aircraft engines, ground flight simulators, parts, components, and subassemblies.</SUBJECT> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Caribbean Basin Initiative</HD> <SECTNO>10.191</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>10.192</SECTNO> <SUBJECT>Claim for exemption from duty under the CBI.</SUBJECT> <SECTNO>10.193</SECTNO> <SUBJECT>Imported directly.</SUBJECT> <SECTNO>10.194</SECTNO> <SUBJECT>Evidence of direct shipment.</SUBJECT> <SECTNO>10.195</SECTNO> <SUBJECT>Country of origin criteria.</SUBJECT> <SECTNO>10.196</SECTNO> <SUBJECT>Cost or value of materials produced in a beneficiary country or countries.</SUBJECT> <SECTNO>10.197</SECTNO> <SUBJECT>Direct costs of processing operations performed in a beneficiary country or countries.</SUBJECT> <SECTNO>10.198</SECTNO> <SUBJECT>Evidence of country of origin.</SUBJECT> <SECTNO>10.198a</SECTNO> <SUBJECT>Duty reduction for certain leather-related articles.</SUBJECT> <SECTNO>10.198b</SECTNO> <SUBJECT>Products of Puerto Rico processed in a beneficiary country.</SUBJECT> <SECTNO>10.199</SECTNO> <SUBJECT>Duty-free entry for certain beverages produced in Canada from Caribbean rum.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Andean Trade Preference</HD> <SECTNO>10.201</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>10.202</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.203</SECTNO> <SUBJECT>Eligibility criteria in general.</SUBJECT> <SECTNO>10.204</SECTNO> <SUBJECT>Imported directly.</SUBJECT> <SECTNO>10.205</SECTNO> <SUBJECT>Country of origin criteria.</SUBJECT> <SECTNO>10.206</SECTNO> <SUBJECT>Value content requirement.</SUBJECT> <SECTNO>10.207</SECTNO> <SUBJECT>Procedures for filing duty-free treatment claim and submitting supporting documentation.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Textile and Apparel Articles Under the African Growth and Opportunity Act</HD> <SECTNO>10.211</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>10.212</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.213</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <SECTNO>10.214</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <SECTNO>10.215</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <SECTNO>10.216</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <SECTNO>10.217 </SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—United States-Caribbean Basin Trade Partnership Act</HD> <SUBJGRP> <HD SOURCE="HED">Textile and Apparel Articles Under the United States-Caribbean Basin Trade Partnership Act</HD> <SECTNO>10.221</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>10.222</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.223</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <SECTNO>10.224</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <SECTNO>10.225</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <SECTNO>10.226</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <SECTNO>10.227</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> <SECTNO>10.228</SECTNO> <SUBJECT>Additional requirements for preferential treatment of brassieres.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Non-Textile Articles Under the United States-Caribbean Basin Trade Partnership Act</HD> <SECTNO>10.231</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>10.232</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.233</SECTNO> <SUBJECT>Articles eligible for preferential tariff treatment.</SUBJECT> <SECTNO>10.234</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <SECTNO>10.235</SECTNO> <SUBJECT>Filing of claim for preferential tariff treatment.</SUBJECT> <SECTNO>10.236</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <SECTNO>10.237</SECTNO> <SUBJECT>Verification and justification of claim for preferential tariff treatment.</SUBJECT> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart F—Andean Trade Promotion and Drug Eradication Act</HD> <SUBJGRP> <HD SOURCE="HED">Apparel and Other Textile Articles Under the Andean Trade Promotion and Drug Eradication Act</HD> <SECTNO>10.241</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>10.242</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.243</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <SECTNO>10.244</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <SECTNO>10.245</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <SECTNO>10.246</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <SECTNO>10.247</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> <SECTNO>10.248</SECTNO> <SUBJECT>Additional requirements for preferential treatment of brassieres.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Extension of ATPA Benefits to Tuna and Certain Other Non-Textile Articles</HD> <SECTNO>10.251</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>10.252</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.253</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <SECTNO>10.254</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <SECTNO>10.255</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <SECTNO>10.256</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.<PRTPAGE P="84"/> </SUBJECT> <SECTNO>10.257</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart G—United States-Canada Free Trade Agreement</HD> <SECTNO>10.301</SECTNO> <SUBJECT>Scope and applicability.</SUBJECT> <SECTNO>10.302</SECTNO> <SUBJECT>Eligibility criteria in general.</SUBJECT> <SECTNO>10.303</SECTNO> <SUBJECT>Originating goods.</SUBJECT> <SECTNO>10.304</SECTNO> <SUBJECT>Exclusions.</SUBJECT> <SECTNO>10.305</SECTNO> <SUBJECT>Value content requirement.</SUBJECT> <SECTNO>10.306</SECTNO> <SUBJECT>Direct shipment to the United States.</SUBJECT> <SECTNO>10.307</SECTNO> <SUBJECT>Documentation.</SUBJECT> <SECTNO>10.308</SECTNO> <SUBJECT>Records retention.</SUBJECT> <SECTNO>10.309</SECTNO> <SUBJECT>Verification of documentation.</SUBJECT> <SECTNO>10.310</SECTNO> <SUBJECT>Election to average for motor vehicles.</SUBJECT> <SECTNO>10.311</SECTNO> <SUBJECT>Documentation for election to average for motor vehicles.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart H—United States-Chile Free Trade Agreement</HD> <SUBJGRP> <HD SOURCE="HED">General Provisions</HD> <SECTNO>10.401</SECTNO> <SUBJECT>Scope.</SUBJECT> <SECTNO>10.402</SECTNO> <SUBJECT>General definitions.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Import Requirements</HD> <SECTNO>10.410</SECTNO> <SUBJECT>Filing of claim for preferential tariff treatment upon importation.</SUBJECT> <SECTNO>10.411</SECTNO> <SUBJECT>Certification of origin.</SUBJECT> <SECTNO>10.412</SECTNO> <SUBJECT>Importer obligations.</SUBJECT> <SECTNO>10.413</SECTNO> <SUBJECT>Validity of certification.</SUBJECT> <SECTNO>10.414</SECTNO> <SUBJECT>Certification not required.</SUBJECT> <SECTNO>10.415</SECTNO> <SUBJECT>Maintenance of records.</SUBJECT> <SECTNO>10.416</SECTNO> <SUBJECT>Effect of noncompliance; failure to provide documentation regarding transshipment.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Tariff Preference Level</HD> <SECTNO>10.420</SECTNO> <SUBJECT>Filing of claim for tariff preference level.</SUBJECT> <SECTNO>10.421</SECTNO> <SUBJECT>Goods eligible for tariff preference claims.</SUBJECT> <SECTNO>10.422</SECTNO> <SUBJECT>Submission of certificate of eligibility.</SUBJECT> <SECTNO>10.423</SECTNO> <SUBJECT>Certificate of eligibility not required.</SUBJECT> <SECTNO>10.424</SECTNO> <SUBJECT>Effect of noncompliance; failure to provide documentation regarding transshipment of non-originating cotton or man-made fiber fabric or apparel goods.</SUBJECT> <SECTNO>10.425</SECTNO> <SUBJECT>Transit and transshipment of non-originating cotton or man-made fiber fabric or apparel goods.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Export Requirements</HD> <SECTNO>10.430</SECTNO> <SUBJECT>Export requirements.</SUBJECT> <SECTNO>10.431</SECTNO> <SUBJECT>Failure to comply with requirements.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Post-Importation Duty Refund Claims</HD> <SECTNO>10.440</SECTNO> <SUBJECT>Right to make post-importation claim and refund duties.</SUBJECT> <SECTNO>10.441</SECTNO> <SUBJECT>Filing procedures.</SUBJECT> <SECTNO>10.442</SECTNO> <SUBJECT>CBP processing procedures.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Rules of Origin</HD> <SECTNO>10.450</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>10.451</SECTNO> <SUBJECT>Originating goods.</SUBJECT> <SECTNO>10.452</SECTNO> <SUBJECT>Exclusions.</SUBJECT> <SECTNO>10.453</SECTNO> <SUBJECT>Treatment of textile and apparel sets.</SUBJECT> <SECTNO>10.454</SECTNO> <SUBJECT>Regional value content.</SUBJECT> <SECTNO>10.455</SECTNO> <SUBJECT>Value of materials.</SUBJECT> <SECTNO>10.456</SECTNO> <SUBJECT>Accessories, spare parts or tools.</SUBJECT> <SECTNO>10.457</SECTNO> <SUBJECT>Fungible goods and materials.</SUBJECT> <SECTNO>10.458</SECTNO> <SUBJECT>Accumulation.</SUBJECT> <SECTNO>10.459</SECTNO> <SUBJECT>De minimis.</SUBJECT> <SECTNO>10.460</SECTNO> <SUBJECT>Indirect materials.</SUBJECT> <SECTNO>10.461</SECTNO> <SUBJECT>Retail packaging materials and containers.</SUBJECT> <SECTNO>10.462</SECTNO> <SUBJECT>Packing materials and containers for shipment.</SUBJECT> <SECTNO>10.463</SECTNO> <SUBJECT>Transit and transshipment.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Origin Verifications and Determinations</HD> <SECTNO>10.470</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> <SECTNO>10.471</SECTNO> <SUBJECT>Special rule for verification in Chile of U.S. imports of textile and apparel products.</SUBJECT> <SECTNO>10.472</SECTNO> <SUBJECT>Verification in the United States of textile and apparel goods.</SUBJECT> <SECTNO>10.473</SECTNO> <SUBJECT>Issuance of negative origin determinations.</SUBJECT> <SECTNO>10.474</SECTNO> <SUBJECT>Repeated false or unsupported preference claims.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Penalties</HD> <SECTNO>10.480</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>10.481</SECTNO> <SUBJECT>Corrected declaration by importers.</SUBJECT> <SECTNO>10.482</SECTNO> <SUBJECT>Corrected certification of origin by exporters or producers.</SUBJECT> <SECTNO>10.483</SECTNO> <SUBJECT>Framework for correcting declarations and certifications.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Goods Returned After Repair or Alteration</HD> <SECTNO>10.490</SECTNO> <SUBJECT>Goods re-entered after repair or alteration in Chile.</SUBJECT> </SUBJGRP> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>19 U.S.C. 66, 1202 (General Note 3(i), Harmonized Tariff Schedule of the United States), 1321, 1481, 1484, 1498, 1508, 1623, 1624, 3314;</P> <P>Section 10.17 also issued under 19 U.S.C. 1401a, 1402;</P> <P>Sections 10.25 and 10.26 also issued under 19 U.S.C. 3592;</P> <P>Sections 10.41, 10.41a, 10.107 also issued under 19 U.S.C. 1322;</P> <P>Section 10.41b also issued under 19 U.S.C. 1202 (Chapter 98, Subchapter III, U.S. Note 3, HTSUS);</P> <P>Section 10.53 also issued under 16 U.S.C. 1521, <E T="03">et seq.;</E> </P> <P>Section 10.59 also issued under 19 U.S.C. 1309, 1317;</P> <P>Sections 10.61, 10.62, 10.63, 10.64, 10.64a also issued under 19 U.S.C. 1309;</P> <P>Sections 10.62a, 10.65 also issued under 19 U.S.C. 1309, 1317, 1555, 1556, 1557, 1646a;</P> <P>§ 10.62b also issued under 19 U.S.C. 1557;<PRTPAGE P="85"/> </P> <P>Sections 10.70, 10.71 also issued under 19 U.S.C. 1486;</P> <P>Sections 10.80, 10.81, 10.82, 10.83 also issued under 19 U.S.C. 1313 (e) and (i);</P> <P>Section 10.91 also issued under Pub. L. 106-476 (114 Stat. 2101), sections 1434, 1435;</P> <P>Sections 10.171 through 10.178a also issued under 19 U.S.C. 2461 <E T="03">et seq.</E>;</P> <P>Section 10.183 also issued under 19 U.S.C. 1202 (General Note 6, HTSUS);</P> <P>Sections 10.191 through 10.199 also issued under 19 U.S.C. 2701 <E T="03">et seq.</E>;</P> <P>Sections 10.201 through 10.207 also issued under 19 U.S.C. 3203;</P> <P>Sections 10.211 through 10.217 also issued under 19 U.S.C. 3721;</P> <P>Sections 10.221 through 10.228 and §§ 10.231 through 10.237 also issued under 19 U.S.C. 2701 <E T="03">et seq.</E> </P> <P>Sections 10.241 through 10.248 and §§ 10.251 through 10.257 also issued under 19 U.S.C. 3203.</P> <P>Sections 10.401 through 10.490 also issued under Pub. L. 108-77, 117 Stat. 909 (19 U.S.C. 3805 note).</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>28 FR 14663, Dec. 31, 1963, unless otherwise noted.</P> </SOURCE> <SUBPART> <HD SOURCE="HED">Subpart A—General Provisions</HD> <SUBJGRP> <HD SOURCE="HED">Articles Exported and Returned</HD> <SECTION> <SECTNO>§ 10.1</SECTNO> <SUBJECT>Domestic products; requirements on entry.</SUBJECT> <P>(a) Except as otherwise provided for in paragraph (g), (h), (i) or (j) of this section or elsewhere in this part or in § 145.35 of this chapter, the following documents shall be filed in connection with the entry of articles in a shipment valued over $2,000 and claimed to be free of duty under subheading 9801.00.10 or 9802.00.20, Harmonized Tariff Schedule of the United States (HTSUS):</P> <P>(1) A declaration by the foreign shipper in substantially the following form:</P> <EXTRACT> <P>I, ___________,</P> <FP>declare that to the best of my knowledge and belief the articles herein specified were exported from the United States, from the port of ________ on or about ________, 19___, and that they are returned without having been advanced in value or improved in condition by any process of manufacture or other means.</FP> <GPOTABLE CDEF="9,9,9,18,18" COLS="5" OPTS="L2"> <BOXHD> <CHED H="1">Marks</CHED> <CHED H="1">Number</CHED> <CHED H="1">Quantity</CHED> <CHED H="1">Description</CHED> <CHED H="1">Value, in U.S. coin</CHED> </BOXHD> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>(Date)</ENT> <ENT/> <ENT/> <ENT>(Signature)</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>(Address)</ENT> <ENT/> <ENT/> <ENT>(Capacity)</ENT> </ROW> </GPOTABLE> </EXTRACT> <P>(2) A declaration by the owner, importer, consignee, or agent having knowledge of the facts regarding the claim for free entry. If the owner or ultimate consignee is a corporation, such declaration may be signed by the president, vice president, secretary, or treasurer of the corporation, or may be signed by any employee or agent of the corporation who holds a power of attorney executed under the conditions outlined in subpart C, part 141 of this chapter and a certification by the corporation that such employee or other agent has or will have knowledge of the pertinent facts. This declaration shall be in substantially the following form: </P> <EXTRACT> <P>I, _______,</P> <FP>declare that the (above) (attached) declaration by the foreign shipper is true and correct to the best of my knowledge and belief, that the articles were manufactured by ________ (name of manufacturer) located in ________ (city and state), that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS, and that the articles were exported from the United States without benefit of drawback.</FP> <FP SOURCE="FP-DASH"/> <FP>(Date)</FP> <FP SOURCE="FP-DASH"/> <FP>(Address)</FP> <FP SOURCE="FP-DASH"/> <FP>(Signature)</FP> <FP SOURCE="FP-DASH"/> <FP>(Capacity)</FP> </EXTRACT> <P>(b) In any case in which the value of the returned articles exceeds $2,000 and the articles are not clearly marked with the name and address of the U.S. manufacturer, the port director may require, in addition to the declarations <PRTPAGE P="86"/>required in paragraph (a) of this section, such other documentation or evidence as may be necessary to substantiate the claim for duty-free treatment. Such other documentation or evidence may include a statement from the U.S. manufacturer verifying that the articles were made in the United States, or a U.S. export invoice, bill of lading or airway bill evidencing the U.S. origin of the articles and/or the reason for the exportation of the articles.</P> <P>(c) A certificate from the master of a vessel stating that products of the United States are returned without having been unladen from the exporting vessel may be accepted in lieu of the declaration of the foreign shipper required by paragraph (a)(1) of this section.</P> <P>(d) If the port director is reasonably satisfied, because of the nature of the articles or production of other evidence, that the articles are imported in circumstances meeting the requirements of subheading 9801.00.10 or 9802.00.20, HTSUS, and related section and additional U.S. notes, he may waive the requirements for producing the documents specified in paragraph (a) of this section.</P> <P>(e) No evidence relative to the conditions of subheading 9801.00.10, HTSUS, shall be required in the case of articles the product of the U.S. in use at the time of importation as the usual coverings or containers of merchandise not subject to an ad valorem rate of duty unless such articles would be dutiable if not products of the U.S. under General Rule of Interpretation 5, HTSUS.</P> <P>(f) In the case of photographic films and dry plates manufactured in the United States (except motion picture films to be used for commercial purposes) exposed abroad and entered under subheading 9802.00.20, HTSUS, the requirements of paragraphs (a) and (c) of this section are applicable except that the declaration by the foreign shipper provided for in paragraph (a)(1) to the effect that the articles “are returned without having been advanced in value or improved in condition by any process of manufacture or other means” shall be crossed out, and the entrant shall show on the declaration provided for in paragraph (a)(2) that the subject articles when exported were of U.S. manufacture and are returned after having been exposed, or exposed and developed, and, in the case of motion picture films, that they will not be used for commercial purposes.</P> <P>(g) <E T="03">Aircraft and aircraft parts and equipment.</E> (1) In the case of aircraft and aircraft parts and equipment returned to the United States under subheading 9801.00.10, HTSUS, by or for the account of an aircraft owner or operator and intended for use in his own aircraft operations, within or outside the United States, the entry summary may be made on Customs Form 3311. The entry summary on Customs Form 3311 shall be executed by the entrant and supported by the entry documentation required by § 142.3 of this chapter. If the Customs officer is satisfied that the articles are products of the United States, that they have not been improved in condition or advanced in value while abroad, and that no drawback has been or will be paid, the other documents described in this section shall not be required, and no bond need be filed for their production.</P> <P>(2) The entrant shall show on Customs Form 3311:</P> <P>(i) The name and address of the aircraft owner or operator by whom or for whose account the articles are returned to the United States, in the block headed “Articles Returned To (Name and Address)”,</P> <P>(ii) The name of the importing vessel or conveyance,</P> <P>(iii) The date of its arrival,</P> <P>(iv) A description of the articles,</P> <P>(v) The value of the articles, and</P> <P>(vi) That the articles are intended for use by the aircraft owner or operator in his own aircraft operations.</P> <P>(3) If Customs Form 3311 is filed at time of entry, it shall serve as both the entry and the entry summary.</P> <P>(h) <E T="03">Nonconsumable vessel stores and equipment.</E> (1) In the case of nonconsumable vessel stores and equipment returned to the United States under subheading 9801.00.10, HTSUS, the entry summary may be made on Customs Form 3311. The entry summary on Customs Form 3311 shall be executed in duplicate by the entrant <PRTPAGE P="87"/>and supported by the entry documentation required by § 142.3 of this chapter. Before an entry summary on Customs Form 3311 may be accepted for nonconsumable vessel stores and equipment, the Customs officer shall be satisfied that:</P> <P>(i) The articles are products of the United States.</P> <P>(ii) The articles have not been improved in condition or advanced in value while abroad.</P> <P>(iii) No drawback has been or will be paid, and</P> <P>(iv) No duty equal to an internal revenue tax is payable under subheading 9801.00.80, HTSUS.</P> <P>(2) The documentation described in paragraph (a) of this section shall not be required in connection with an entry for nonconsumable vessel stores and equipment on Customs Form 3311.</P> <P>(3) To satisfy the Customs officer that no drawback has been or will be paid on the articles in connection with their removal from the United States, the master of the vessel or other person having knowledge of the facts shall furnish a written declaration which may be made on the reverse side of Customs Form 3311 showing that the articles were:</P> <P>(i) Exported as stores or equipment on a United States vessel or a vessel operated by the United States Government,</P> <P>(ii) Not landed in a foreign country, except for any needed repairs, adjustments, or refilling and return to the vessel from which landed or,</P> <P>(iii) For transshipment as stores or equipment to another vessel.</P> <P>(4) The entrant also shall show:</P> <P>(i) The name of the importing vessel,</P> <P>(ii) The date of its arrival,</P> <P>(iii) A description of the articles, and</P> <P>(iv) The value of the articles.</P> <P>(5) If Customs Form 3311 is filed at time of entry, it shall serve as both the entry and the entry summary.</P> <P>(i) When the total value of articles of claimed American origin contained in any shipment does not exceed $250 and such articles are found to be unquestionably products of the United States and do not appear to have been advanced in value or improved in condition while abroad and no quota is involved, free entry thereof may be made under subheading 9801.00.10 on Customs Form 3311, executed by the owner, importer, consignee, or agent and filed in duplicate, without regard to the requirement of filing the documentation provided for in paragraph (a) of this section, unless the Customs officer has reason to believe that Customs drawback or exemption from internal revenue tax, or both, were probably allowed on exportation of the articles or that they are otherwise subject to duty. The entrant shall show on Customs Form 3311 the name of the importing conveyance, the date of its arrival, the name of the country from which the articles were returned to the United States, and the value of the articles. The entrant shall also produce evidence of his right to make entry (except as provided in § 141.11(b) of this chapter). If the Customs officer is not entirely certain that the articles to be entered under this paragraph by a nominal consignee are products of the United States, the actual owner or ultimate consignee thereof may be required to execute a Customs Form 3311.</P> <P>(j) In the case of products of the United States, when the aggregate value of the shipment does not exceed $10,000 and the products are imported—</P> <P>(1) For the purposes of repair or alteration, prior to reexportation, or</P> <P>(2) After having been either rejected or returned by the foreign purchaser to the United States for credit, free entry thereof may be made under subheading 9801.00.10, HTSUS, on Customs Form 3311 (a Customs Form 7501 must be submitted as well for such articles as provided in § 143.23(h) of this chapter), executed by the owner, importer, consignee, or agent and filed in duplicate, without regard to the requirement of filing the documentation provided for in paragraph (a) of this section, unless the Customs officer has reason to believe that Customs drawback or exemption from internal revenue tax, or both, were probably allowed on exportation of the articles or that they are otherwise subject to duty. The person making entry shall show on Customs Form 3311 the name of the importing conveyance, the date of its arrival, the name of the country from which the articles were returned to the United States, and the value of the articles. <PRTPAGE P="88"/>The person making entry shall also produce evidence of his right to make entry (except as provided in § 141.11(b) of this chapter). If the Customs officer is not entirely certain that the articles to be entered under this paragraph by a nominal consignee are products of the United States, the actual owner or ultimate consignee thereof may be required to execute a Customs Form 3311.</P> <CITA>[T.D. 72-119, 37 FR 8867, May 2, 1972 as amended by T.D. 78-99, 43 FR 13060, Mar. 29, 1978; 43 FR 20003, May 10, 1978; T.D. 79-221, 44 FR 46812, Aug. 9, 1979; T.D. 83-82, 48 FR 14596, Apr. 5, 1983; T.D. 89-1, 53 FR 51246, Dec. 21, 1988; T.D. 94-47, 59 FR 25566, May 17, 1994; T.D. 97-82, 62 FR 51769, Oct. 3, 1997; T.D. 98-28, 63 FR 16416, Apr. 3, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.3</SECTNO> <SUBJECT>Drawback; internal-revenue tax.</SUBJECT> <P>(a) Except as prescribed in § 10.1(f) or in paragraphs (c) and (f) of this section, no free entry shall be allowed under Chapter 98, Subchapter 1, Harmonized Tariff Schedule of the United States (HTSUS), in the final liquidation of an entry unless the port director is satisfied by the certificate of exportation or other evidence or information that no drawback was allowed in connection with the exportation from the United States, and unless no internal-revenue tax is imposed on the importation of like articles not previously exported from the United States or, if such tax is being imposed at the time of entry for consumption or withdrawal from warehouse for consumption, the port director is satisfied that an internal-revenue tax on production or importation was paid in respect of the imported article before it was exported from the United States and was not refunded. Except as provided for in § 10.1(f), when it is impracticable, because of the destruction of Customs records or other circumstances, to determine whether drawback was allowed, or the amount of drawback allowed, with respect to an article established to be a returned product of the United States which has not been advanced in value or improved in condition while abroad, there shall be assessed on the returned article an amount of duty determined as follows:</P> <P>(1) If there is any likelihood that drawback was allowable on the exportation of like articles at any time when the imported article may have been exported from the United States, the estimated amount of any drawback which would have been allowable if duty had been paid on any foreign merchandise likely to have been used in the manufacture of the returned article at the rate or rates applicable to such foreign merchandise on the date of importation of the returned article (see paragraph (b) of this section), and</P> <P>(2) If there is any likelihood that a refund or remission of tax was allowed on the exportation of the returned article, the amount of any internal-revenue tax which would be payable at the time of importation if the returned article were wholly of foreign origin, but in no such case shall there be assessed more than an amount equal to the duty and tax that would apply if the returned article were wholly of foreign origin and originally imported. (See § 10.7(a).) Except as provided for in § 10.1(f), if the imported article is of a kind which would be subject to an internal-revenue tax if of foreign origin and payment of an internal-revenue tax before exportation without refund thereof is not established, duty shall be assessed on the imported article in an amount equal to the internal-revenue tax imposed at the time of entry for consumption or withdrawal from warehouse for consumption on like articles of foreign origin, plus the amount of any drawback allowed on the exportation of the article from the United States; but if no drawback was allowed, the duty equal to internal-revenue tax shall be the total duty to be assessed. If an allowance of drawback on the exportation from the United States of the imported article is established, duty shall be assessed in an amount equal to such drawback, plus an amount equal to any internal-revenue tax which may be assessable in accordance with this paragraph; but in no case shall duty equal to drawback, or to drawback and internal-revenue tax, be assessed in an amount in excess of the ordinary Customs duty and internal-revenue tax applicable to like articles of foreign origin. In any case, where payment of internal-revenue tax before exportation without refund thereof is established, no duty equal to an internal-revenue tax currently in force shall be assessed.<PRTPAGE P="89"/> </P> <P>(b) In the absence of satisfactory evidence as to the nonallowance of drawback or the amount thereof allowed on the following articles of American manufacture or production, duty shall be assessed thereon in the amounts respectively indicated, the amount shown in each case being considered the fair average amount of drawback allowed on such articles:</P> <GPOTABLE CDEF="s200,r90" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">Article</CHED> <CHED H="1">Duty assessment</CHED> </BOXHD> <ROW> <ENT I="01">Drums, metal (when not exempted from duty in accordance with sec. 10.3(c))</ENT> <ENT>24 cents each.</ENT> </ROW> <ROW> <ENT I="01">Hosiery, nylon</ENT> <ENT>45 cents per dozen.</ENT> </ROW> <ROW> <ENT I="01">Lead compound, tetraethyl</ENT> <ENT>$0.003 per kilogram.</ENT> </ROW> <ROW> <ENT I="01">Lithopone</ENT> <ENT>$0.00065 per kilogram.</ENT> </ROW> <ROW> <ENT I="01">Oxide, zinc</ENT> <ENT>$0.0029 per kilogram.</ENT> </ROW> <ROW> <ENT I="11">Piece goods, cotton:</ENT> </ROW> <ROW> <ENT I="02">Bleached</ENT> <ENT>$0.03199 per square meter.</ENT> </ROW> <ROW> <ENT I="02">Dyed</ENT> <ENT>$0.03454 per square meter.</ENT> </ROW> <ROW> <ENT I="02">Printed</ENT> <ENT>$0.03226 per square meter.</ENT> </ROW> <ROW> <ENT I="11">Piece goods, nylon: Dyed</ENT> <ENT>$0.29086 per square meter.</ENT> </ROW> <ROW> <ENT I="11">Piece goods, rayon:</ENT> </ROW> <ROW> <ENT I="02">Printed</ENT> <ENT>$0.04867 per square meter.</ENT> </ROW> <ROW> <ENT I="02">Other than printed (white, piece dyed or yarn dyed)</ENT> <ENT>$0.08478 per square meter.</ENT> </ROW> <ROW> <ENT I="01">Tallow, refined, inedible</ENT> <ENT>$0.003 per kilogram.</ENT> </ROW> </GPOTABLE> <P>(c) The following articles shall be admitted free of duty, even though exported from the United States with benefit of drawback:</P> <P>(1) Any article of a kind which would be admitted free of duty otherwise than under Chapter 98, Subchapter 1, HTSUS, if of foreign origin;</P> <P>(2) Substantial containers or holders of domestic manufacture, including shooks and staves when returned as boxes or barrels, when in use at the time of importation as the usual containers of merchandise;</P> <P>(3) Any article provided for in subheadings 9801.00.70 or 9801.00.80, HTSUS, with respect to which the port director has determined that the collection of duty under such subheadings 9801.00.70 or 9801.00.80, HTSUS, would involve an expense and inconvenience to the Government disproportionate to the probable amount of such duty; and</P> <P>(4) Other articles of domestic manufacture which are in use at the time of importation as the usual coverings or containers of merchandise not subject to an ad valorem rate of duty, and which have not been advanced in value or improved in condition while abroad by any process of manufacture or other means.</P> <P>(d) Articles manufactured or produced in the United States in a Customs bonded warehouse and exported shall be subject on reimportation to a duty equal to the total duty and internal-revenue tax, if any, imposed at the time of entry for consumption or withdrawal from warehouse for consumption with respect to the importation of like articles not previously exported from the United States.</P> <P>(e) Animals straying across the border or driven across the border for pasturage purposes or for feeding to improve them for the market and not returned within 8 months are excluded from free entry as domestic products returned.</P> <P>(f) Tobacco products and cigarette papers and tubes classifiable under subheading 9801.00.80, HTSUS, may be released from customs custody without the payment of that part of the duty attributable to the internal-revenue tax for return to internal-revenue bond as provided by section 5704(d) of the Internal Revenue Code of 1954.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 68-104, 33 FR 5616, Apr. 11, 1968; T.D. 83-240, 48 FR 53098, Nov. 25, 1983; T.D. 89-1, 53 FR 51246, Dec. 21, 1988; T.D. 93-66, 58 FR 44130, Aug. 19, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.4</SECTNO> <SUBJECT>Internal-revenue marks; erasure.</SUBJECT> <P>Internal-revenue brands or marks on casks or other containers previously exported from the United States must be erased at the importer's expense under Customs supervision before their delivery from Customs custody.</P> </SECTION> <SECTION> <PRTPAGE P="90"/> <SECTNO>§ 10.5</SECTNO> <SUBJECT>Shooks and staves; cloth boards; port director's account.</SUBJECT> <P>(a) Shooks and staves produced in the United States and returned in the form of complete boxes or barrels in use as the usual containers of merchandise are exempt from any duties imposed by the tariff laws upon similar containers made of foreign shooks or staves, provided their identity is established under the regulations in this part.</P> <P>(b) The term “shook” embraces only shooks which at the time of exportation from this country are ready to be assembled into boxes or barrels without further cutting to size; except that box shooks may be exported in double lengths and cut abroad. The number of boxes made from such shooks which may be imported into this country free of duty cannot exceed the number of complete sets of shooks exported.</P> <P>(c) [Reserved]</P> <P>(d) An exporter of shooks or staves in respect of which free entry is to be claimed when returned as boxes or barrels shall file in triplicate with the director of the port of exportation, at least 6 hours before the landing of the articles on the exporting vessel, a Certificate of Registration, Customs Form 4455.</P> <P>(e) The Certificate of Registration, CF 4455, shall be completed in triplicate by the port director after verification from the manifest of the exporting vessel and the return of the lading officer. The original shall be forwarded by the port director to the consignee. The duplicate copy shall be given to the exporter and the triplicate copy shall be retained.</P> <P>(f) Whenever boxes or barrels alleged to have been manufactured from American shooks or staves are shipped to the United States from a person abroad other than the one to whom they were exported from the United States, the importer shall be required to obtain from the foreign consignee to whom the shooks or staves were originally exported from this country the certificate or certificates, Customs Form 4455, covering the exportation of the shooks or staves from the United States, or an extract therefrom signed by such consignee, showing the number of shooks or staves covered by such certificate or certificates, together with the number of superficial feet of such shooks or staves. Such Form 4455, or extract therefrom, shall be filed by the importer in connection with the entry of the boxes or barrels.</P> <P>(g) Accounts shall be kept by the director of the port of exportation of the shooks and staves as to each exportation thereof and as to the returns thereof in boxes, barrels, etc. Notifications of such returns shall be given to the port of exportation by the director of the port of importation. When returns in the form of boxes, barrels, etc., entirely account for the shooks and staves exported as shown on the appropriate Customs Form 4455, the port director maintaining the account shall so inform the port director making inquiry about the merchandise being imported and alleged to contain shooks or staves covered by the particular exportation.</P> <P>(h) A record of cloth boards of domestic manufacture exported to be wrapped with foreign textiles shall be kept by the port director in a similar manner as for shooks and staves. Cloth boards of domestic manufacture are conditionally free of duty under Chapter 98, subchapter 1, Harmonized Tariff Schedule of the United States (HTSUS). If such boards are advanced in value or improved in condition while abroad, free entry shall be denied on importation.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 78-99, 43 FR 13060, Mar. 29, 1978; T.D. 89-1, 53 FR 51247, Dec. 21, 1988; T.D. 98-52, 63 FR 29954, June 2, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.6</SECTNO> <SUBJECT>Shooks and staves; claim for duty exemption.</SUBJECT> <P>An importer, seeking an exemption from duty on account of boxes or barrels made from American shooks or staves, must make such a claim on Customs Form 4455 at the time of filing the entry. Upon receipt, from the director of the port of exportation of the shooks and staves, of corroboration that the records of exportation do not conflict materially with such a claim, the exemption may be allowed. If the claim for an exemption is disallowed in full or in part, the importer may file a request within 15 days of the date of the port director's notice to him of any <PRTPAGE P="91"/>disallowance, for referral of the question to the Commissioner of Customs for review.</P> <CITA>[T.D. 87-75, 52 FR 20066, May 29, 1987, as amended by T.D. 98-52, 63 FR 29954, June 2, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.7</SECTNO> <SUBJECT>Substantial containers or holders.</SUBJECT> <P>(a) Substantial containers or holders, which are products of the United States, which are of the usual and ordinary types used in the shipment or transportation of goods, which are reusable for such purposes, and which are imported containing or holding merchandise, shall be entered under the general regulations governing the free entry of domestic products exported and returned. When such containers or holders are imported not containing or holding merchandise they may be admitted without entry if readily identifiable as products of the United States.</P> <P>(b) Substantial containers or holders, which are of foreign production and previously imported duty paid, which are of the usual or ordinary types used in the shipment or transportation of goods, which are reusable for such purpose, and which are imported containing or holding merchandise, shall be exempt from duty if (1) exported in accordance with the regulations contained in § 10.5 (d) and (e), and (2) there is filed in connection with the entry a certificate of the foreign shipper in the form prescribed by paragraph (c) of this section.</P> <P>(c) The certificate to be furnished by the foreign shipper for the use of the director of the port of entry shall be in the following form: </P> <EXTRACT> <P>I, ________, of ________, do hereby certify that to the best of my knowledge and belief the substantial containers and holders mentioned in (the annexed invoice) (invoice No. ____ of ____, 19_) * are of the manufacture of ________ and were exported from the United States at the port of ______, per S.S. ________ on _____, 19—, and that the same are being returned to the United States (empty) filled with ____) (holdings _______).*<FTREF/> </P> <FTNT> <P>*Cross out inapplicable words.</P> </FTNT> <P SOURCE="P-DASH"/> <FP SOURCE="FRP">Shipper</FP> </EXTRACT> <P>(d) The port director, after verification of the foreign shipper's certificate with the records of the director of the port of exportation in this country, shall allow free entry to the extent the basis for such allowance is verified. The procedure in the last two sentences of § 10.6 shall be applicable.</P> <P>(e) If claim for exemption from duty for such containers or holders of foreign production previously imported duty paid is made at the time of entry, the certificate of the foreign shipper may be accepted if produced at any time prior to the liquidation of the entry.</P> <P>(f) When such containers or holders of foreign production previously imported duty paid are reimported empty, they may be admitted without entry if readily identifiable as having been previously imported duty paid.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 82-145, 47 FR 35475, Aug. 16, 1982; T.D. 86-118, 51 FR 22515, June 20, 1986; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.8</SECTNO> <SUBJECT>Articles exported for repairs or alterations.</SUBJECT> <P>(a) Except as otherwise provided for in this section and except in the case of goods covered by § 181.64 of this chapter, the following documents shall be filed in connection with the entry of articles which are returned after having been exported for repairs or alterations and which are claimed to be subject to duty only on the value of the repairs or alterations performed abroad under subheading 9802.00.40 or 9802.00.50, Harmonized Tariff Schedule of the United States (HTSUS):</P> <P>(1) A declaration from the person who performed such repairs or alterations, in substantially the following form: </P> <EXTRACT> <P>I,________, declare that the articles herein specified are the articles which, in the condition in which they were exported from the United States, were received by me (us) on ________, 19________, from________ (name and address of owner or exporter in the United States); that they were received by me (us) for the sole purpose of being repaired or altered; that only the repairs or alterations described below were performed by me (us); that the full cost or (when no charge is made) value of such repairs or alterations are correctly <PRTPAGE P="92"/>stated below; and that no substitution whatever has been made to replace any of the articles originally received by me (us) from the owner or exporter thereof mentioned above.</P> <GPOTABLE CDEF="s10,xls30,xls30,xls30" COLS="4" OPTS="L2,i1"> <BOXHD> <CHED H="1">Marks and numbers</CHED> <CHED H="1">Description of articles and of repairs or alterations</CHED> <CHED H="1">Full cost or (when no charge is made) value of repairs or alterations (see subchapter II, chapter 98, HTSUS)</CHED> <CHED H="1">Total value of articles after repairs or alterations</CHED> </BOXHD> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> </ROW> </GPOTABLE> <FP SOURCE="FP-DASH"/> <FP>(Date)</FP> <FP SOURCE="FP-DASH"/> <FP>(Address)</FP> <FP SOURCE="FP-DASH"/> <FP>(Signature)</FP> <FP SOURCE="FP-DASH"/> <FP>(Capacity)</FP> </EXTRACT> <P>(2) A declaration by the owner, importer, consignee, or agent having knowledge of the pertinent facts in substantially the following form: </P> <EXTRACT> <P>I, _____,</P> <FP>declare that the (above) (attached) declaration by the person who performed the repairs or alterations abroad is true and correct to the best of my knowledge and belief; that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS; that such articles were exported from the United States for repairs or alterations and without benefit of drawback from ________ (port) on ________, 19________; and that the articles entered in their repaired or altered condition are the same articles that were exported on the above date and that are identified in the (above) (attached) declaration.</FP> <FP SOURCE="FP-DASH"/> <FP>(Date)</FP> <FP SOURCE="FP-DASH"/> <FP>(Address)</FP> <FP SOURCE="FP-DASH"/> <FP>(Signature)</FP> <FP SOURCE="FP-DASH"/> <FP>(Capacity)</FP> </EXTRACT> <P>(b) The port director may require such additional documentation as is deemed necessary to prove actual exportation of the articles from the United States for repairs or alterations, such as a foreign customs entry, foreign customs invoice, foreign landing certificate, bill of lading, or an airway bill.</P> <P>(c) If the port director concerned is satisfied, because of the nature of the articles or production of other evidence, that the articles are imported under circumstances meeting the requirements of subheading 9802.00.40 or 9802.00.50, HTSUS, and related section and additional U.S. notes, he may waive submission of the declarations provided for in paragraph (a) of this section.</P> <P>(d) The port director shall require at the time of entry a deposit of estimated duties based upon the full cost or value of the repairs or alterations. The cost or value of the repairs or alterations outside the United States, which is to be set forth in the invoice and entry papers as the basis for the assessment of duty under subheading 9802.00.40 or 9802.00.50, HTSUS, shall be limited to the cost or value of the repairs or alterations actually performed abroad, which will include all domestic and foreign articles furnished for the repairs or alterations but shall not include any of the expenses incurred in this country whether by way of engineering costs, preparation of plans or specifications, furnishing of tools or equipment for doing the repairs or alterations abroad, or otherwise.</P> <CITA>[T.D. 94-47, 59 FR 25567, May 17, 1994, as amended by T.D. 95-68, 60 FR 46361, Sept. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.8a</SECTNO> <SUBJECT>Imported articles exported and reimported.</SUBJECT> <P>(a) In addition to regular entry procedures, supplementary documentation is required in connection with duty-free entries under subheading 9801.00.25, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), of articles which were originally entered duty paid, removed from Customs custody, and subsequently exported, if:</P> <P>(1) The articles were exported within 3 years after the date of the previous importation.</P> <P>(2) The articles were not advanced in value or improved in condition by any process of manufacture or other means while abroad.</P> <P>(3) The articles did not conform to sample or specifications abroad.<PRTPAGE P="93"/> </P> <P>(4) The articles are reimported by or for the account of the person who imported them into and exported them from the United States.</P> <P>(b) The following supplementary documents shall be filed in connection with the entry of articles claimed to be free of duty under subheading 9801.00.25, Harmonized Tariff Schedule of the United States:</P> <P>(1) A declaration by the person abroad who received and is returning the merchandise to the United States, in substantially the following form: </P> <EXTRACT> <P>I declare that the_____________(Description of articles) were received by me from _________________ (Name and address of U.S. exporter), that they have not been advanced in value or improved in condition by any process of manufacture or other means and are being returned to ________________(Name and address of consignee in the United States) because they do not conform to sample or specifications for the following reasons:</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Date)(Signature)</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Address)(Title)</P> </EXTRACT> <P>(2) A declaration by the owner, importer, consignee, or agent, in substantially the following form: </P> <EXTRACT> <P>I declare that the ___________ (Description of articles) were previously imported into the United States at the Port of ________ (Name of port), Entry No.___, on _______ (Date of entry) by ___________ (Name and address of importer) at which time duty was paid; that they were exported from the United States at the Port of ________ (Name of port) on __________ (Date of exportation) by ___________ (Name and address of exporter) without benefit of drawback; that the articles are being reimported by or for the account of ________, and, that the attached declaration from ________________ (Name of foreign shipper) is correct in every respect.</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Date)(Signature)</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Address)(Title)</P> </EXTRACT> <P>(c) If the port director concerned is reasonably satisfied because of the nature of the articles or production of other evidence that the requirements of subheading 9801.00.25, Harmonized Tariff Schedule of the United States, and the related section and additional U.S. notes have been met, he may waive the production of the documents provided for in paragraph (b) of this section. </P> <CITA>[T.D. 72-221, 37 FR 17469, Aug. 29, 1972, as amended by T.D. 89-1, 53 FR 51247, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.9</SECTNO> <SUBJECT>Articles exported for processing.</SUBJECT> <P>(a) Except as otherwise provided for in this section, the following documents shall be filed in connection with the entry of articles which are returned after having been exported for further processing and which are claimed to be subject to duty only on the value of the processing performed abroad under subheading 9802.00.60, Harmonized Tariff Schedule of the United States (HTSUS):</P> <P>(1) A declaration by the person who performed the processing abroad, in substantially the following form: </P> <EXTRACT> <P>I, _____, declare that the articles herein specified are the articles which, in the condition in which they were exported from the United States, were received by me (us) on ______, 19 ___, from ________ (name and address of owner or exporter in the United States); that they were received by me (us) for the sole purpose of being processed; that only the processing described below was effected by me (us); that the full cost or (when no charge is made) value of such processing and the value of the articles after processing are correctly stated below; and that no substitution whatever has been made to replace any of the articles originally received by me (us) from the owner or exporter thereof mentioned above.</P> <GPOTABLE CDEF="s10,xls30,xls30,xls30" COLS="4" OPTS="L2,i1"> <BOXHD> <CHED H="1">Marks and numbers</CHED> <CHED H="1">Description of articles and of processing</CHED> <CHED H="1">Full cost or (when no charge is made) value of processing (see subchapter II, chapter 98, HTSUS)</CHED> <CHED H="1">Total value of articles after processing</CHED> </BOXHD> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> </ROW> </GPOTABLE> <FP SOURCE="FP-DASH"/> <FP>(Date)</FP> <FP SOURCE="FP-DASH"/> <FP>(Address)</FP> <FP SOURCE="FP-DASH"/> <FP>(Signature)</FP> <FP SOURCE="FP-DASH"/> <FP>(Capacity)</FP> </EXTRACT> <PRTPAGE P="94"/> <P>(2) A declaration by the owner, importer, consignee, or agent having knowledge of the pertinent facts in substantially the following form: </P> <EXTRACT> <FP SOURCE="FP-DASH">I, _____, declare that the (above) (attached) declaration by the person who performed the processing abroad is true and correct to the best of my knowledge and belief; that the articles were manufactured in the United States by ________ (name and address) or, if of foreign origin, were subjected to ________ (show processes of manufacture, such as molding, casting, machining) in the United States by ________ (name and address); that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS; that the articles were exported for processing and without benefit of drawback from ________ (port) on ______, 19 ___; that the articles entered in their processed condition are otherwise the same articles that were exported on the above date and that are identified in the (above) (attached) declaration; and that the returned articles will be subjected to ________ (describe processing to be performed in the United States) by ________ (name and address of U.S. processor).</FP> <FP SOURCE="FP-DASH"/> <FP>(Date)</FP> <FP SOURCE="FP-DASH"/> <FP>(Address)</FP> <FP SOURCE="FP-DASH"/> <FP>(Signature)</FP> <FP SOURCE="FP-DASH"/> <FP>(Capacity)</FP> </EXTRACT> <P>(b) The port director may require such additional documentation as is deemed necessary to prove actual exportation of the articles from the United States for processing, such as a foreign customs entry, foreign customs invoice, foreign landing certificate, bill of lading, or an airway bill.</P> <P>(c) If the port director concerned is satisfied, because of the nature of the articles or production of other evidence, that the articles are imported under circumstances meeting the requirements of subheading 9802.00.60, HTSUS, and related section and additional U.S. notes, he may waive submission of the declarations provided for in paragraph (a) of this section.</P> <P>(d) The port director shall require at the time of entry a deposit of estimated duties based upon the full cost or value of the processing. The cost or value of the processing outside the United States, which is to be set forth in the invoice and entry papers as the basis for the assessment of duty under subheading 9802.00.60, HTSUS, shall be limited to the cost or value of the processing actually performed abroad, which will include all domestic and foreign articles used in the processing but shall not include the exported United States metal article or any of the expenses incurred in this country whether by way of engineering costs, preparation of plans or specifications, furnishing of tools or equipment for doing the processing abroad, or otherwise.</P> <CITA>[T.D. 94-47, 59 FR 25568, May 17, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.10</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Articles Assembled Abroad With United States Components</HD> <SECTION> <SECTNO>§ 10.11</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) Sections 10.12 through 10.23 set forth definitions and interpretative regulations adopted by the Commissioner of Customs pertaining to the construction of subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) and related provisions of law. These provisions concern claims for the exemption from duty provided by subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), for American-made fabricated components which are returned to the United States as parts of articles assembled abroad. The examples included in these sections describe specific situations in which the exemption may or may not be applicable. The definitions and regulations that follow are promulgated to inform the public of the constructions and interpretations that the United States Customs Service shall give to relevant statutory terms and to assure the impartial and uniform assessment of duties upon merchandise claimed to be partially exempt from duty under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), at the various ports of entry. Nothing in these regulations purports or is intended to restrict the legal right of importers or others to a judicial review of the matters contained therein.<PRTPAGE P="95"/> </P> <P>(b) Section 10.24 sets forth the documentary requirements applicable to the entry of assembled articles claimed to be subject to the exemption provided under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202). Allowance of an importer's claim is dependent upon meeting the statutory requirements for the exemption under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) and his complying with the documentary requirements set forth in § 10.24.</P> <CITA>[T.D. 75-230, 40 FR 43021, Sept. 18, 1975, as amended by T.D. 89-1, 53 FR 51247, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.12</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>As used in §§ 10.11 through 10.24, the following terms shall have the meanings indicated:</P> <P>(a) <E T="03">American-made.</E> The term “American-made” is used to refer to a product of the United States as defined in paragraph (e) of this section.</P> <P>(b) <E T="03">Assembly.</E> “Assembly” means the fitting or joining together of fabricated components.</P> <P>(c) <E T="03">Exemption.</E> “Exemption” means the deduction of the cost or value of products of the United States which were assembled abroad in accordance with the requirements of subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), from the full value of the assembled article.</P> <P>(d) <E T="03">Fabricated component.</E> “Fabricated component” means a manufactured article ready for assembly in the condition as exported except for operations incidental to the assembly.</P> <P>(e) <E T="03">Product of the United States.</E> A “product of the United States” is an article manufactured within the Customs territory of the United States and may consist wholly of United States components or materials, of United States and foreign components or materials, or wholly of foreign components or materials. If the article consists wholly or partially of foreign components or materials, the manufacturing process must be such that the foreign components or materials have been substantially transformed into a new and different article, or have been merged into a new and different article.</P> <CITA>[T.D. 75-230, 40 FR 43021, Sept. 18, 1975, as amended by T.D. 89-1, 53 FR 51247, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.13</SECTNO> <SUBJECT>Statutory provision: Subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202).</SUBJECT> <P>Subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS), (19 U.S.C. 1202), provides that articles assembled abroad in whole or in part of fabricated components, the product of the United States, which (a) were exported in condition ready for assembly without further fabrication, (b) have not lost their physical identity in such articles by change in form, shape, or otherwise, and (c) have not been advanced in value or improved in condition abroad except by being assembled and except by operations incidental to the assembly process such as cleaning, lubricating, and painting, are subject to a duty upon the full value of the imported article, less the cost or, if no charge is made, the value of such products of the United States. The rate of duty which is assessed upon the dutiable portion of the imported article is that which is applicable to the imported article as a whole under the appropriate provision of the HTSUS (19 U.S.C. 1202) for such article. If that provision requires a specific or compound rate of duty, the total duties assessed on the imported article are reduced in such proportion as the cost or value of the returned United States components which qualify for the exemption bears to the full value of the assembled article. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>A transistor radio is assembled abroad from foreign-made components and American-made transistors. Upon importation, the transistor radio is subject to the ad valorem rate of duty applicable to transistor radios upon the value of the radio less the cost or value of the American-made transistors assembled therein.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>A solid-state watch movement is assembled abroad from foreign-made components and an American-made integrated circuit. If the movement in question is subject to the specific rate of duty of 75 cents if the value of the assembled movement is $30, and if the value of the American-made integrated circuit is $10, then the value of the integrated circuit represents one third of the <PRTPAGE P="96"/>total value of the assembled article and the duty on the assembled article will be reduced by one third ($.25). Therefore, the duty on the assembled movement is 50 cents.</P> </EXAMPLE> <CITA>[T.D. 75-230, 40 FR 43021, Sept. 18, 1975, as amended by T.D. 89-1, 53 FR 51247, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.14</SECTNO> <SUBJECT>Fabricated components subject to the exemption.</SUBJECT> <P>(a) <E T="03">Fabricated components, the product of the United States.</E> Except as provided in § 10.15, the exemption provided under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), applies to fabricated components, the product of the United States. The components must be in condition ready for assembly without further fabrication at the time of their exportation from the United States to qualify for the exemption. Components will not lose their entitlement to the exemption by being subjected to operations incidental to the assembly either before, during, or after their assembly with other components. Materials undefined in final dimensions and shapes, which are cut into specific shapes or patterns abroad are not considered fabricated components. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>Articles identifiable in their exported condition as components or parts of the article into which they will be assembled, such as transistors, diodes, integrated circuits, machinery parts, or precut parts of wearing apparel, are regarded as fabricated components.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>Prestamped metal lead frames for semiconductor devices exported in multiple unit strips in which the individual frame units are connected to each other, or integrated circuit wafers containing individual integrated circuit dice which have been scribed or scored in the United States, are regarded as fabricated components. The separation of the individual frames by cutting, or the segmentation of the wafer into individual dice by flexing and breaking along scribed or scored lines, is regarded as an operation incidental to the assembly process.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 3.</HD> <P>Wires of various type, electrical conductors, metal foils, insulating tapes, ribbons, findings used in dressmaking, and similar products, which are in a finished state when exported from the United States, and are ready for use in the assembly of the imported article, are regarded as fabricated components if they are only cut to length or subjected to operations incidental to the assembly process while abroad.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 4.</HD> <P>Uncut textile fabrics exported in bolts from which wearing apparel components will be cut according to a pattern are not regarded as fabricated components. Similarly, other materials, such as lumber, leather, sheet metal, plastic sheeting, exported in basic shapes and forms to be fabricated into components for assembly, are not eligible for treatment as fabricated components.</P> </EXAMPLE> <P>(b) <E T="03">Substantial transformation of foreign-made articles or materials.</E> Foreign-made articles or materials may become products of the United States if they undergo a process of manufacture in the United States which results in their substantial transformation. Substantial transformation occurs when, as a result of manufacturing processes, a new and different article emerges, having a distinctive name, character, or use, which is different from that originally possessed by the article or material before being subject to the manufacturing process. The mere finishing or modification of a partially or nearly complete foreign product in the United States will not result in the substantial transformation of such product and it remains the product of a foreign country. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>A cast metal housing for a valve is made in the United States from imported copper ingots, the product of a foreign country. The housing is a product of the United States because the manufacturing operations performed in the United States to produce the housing resulted in a substantial transformation of the foreign copper ingots.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>An integrated circuit device is assembled in a foreign country and imported into the United States where its leads are formed by bending them to a specified angle. It is then tested and marked. The imported article does not become a product of the United States because the operations performed in the United States do not result in a substantial transformation of the foreign integrated circuit device.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 3.</HD> <P>A circuit board assembly for a computer is assembled in the United States by soldering American-made and foreign-made components onto an American-made printed circuit board. The finished circuit board assembly has a distinct electronic function and is ready for incorporation into the computer. The foreign-made components have undergone a substantial transformation by becoming permanent parts of the circuit board assembly. The circuit board assembly, including all of its parts is regarded as a fabricated component, the product of the United <PRTPAGE P="97"/>States, for purposes of subheading 9802.00.80, HTSUS (19 U.S.C. 1202).</P> </EXAMPLE> <CITA>[T.D. 75-230, 40 FR 43022, Sept. 18, 1975, as amended by T.D. 89-1, 53 FR 51247, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.15</SECTNO> <SUBJECT>Fabricated components not subject to the exemption.</SUBJECT> <P>Fabricated components which are not products of the United States are excluded from the exemption. In addition, the exemption is not applicable to any component exported from the Customs territory of the United States:</P> <P>(a) From continuous Customs custody with remission, abatement, or refund of duty;</P> <P>(b) With benefit of drawback;</P> <P>(c) To comply with any law of the United States or regulation of any Federal agency requiring exportation; or</P> <P>(d) After manufacture or production in the United States under subheading 9813.00.05, HTSUS (19 U.S.C. 1202). </P> <EXAMPLE> <HD SOURCE="HED">Example.</HD> <P>Partially completed components of an electric motor are imported in several separate shipments and are entered under a temporary importation bond to be manufactured into finished motors under the provisions of subheading 9813.00.05, HTSUS (19 U.S.C. 1202). The components are completed and assembled into finished electric motors. The finished motors are exported and are assembled abroad into electric fans which are subsequently imported into the United States. Irrespective of the fact that the assembly of the motors might involve such a substantial change that the motor could be considered a product of the United States, no exemption may be given for the value of the electric motors, since they were exported after manufacture or production in the United States under the provision of subheading 9813.00.05, HTSUS (19 U.S.C. 1202).</P> </EXAMPLE> <CITA>[T.D. 75-230, 40 FR 43023, Sept. 18, 1975, as amended by T.D. 89-1, 53 FR 51247, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.16</SECTNO> <SUBJECT>Assembly abroad.</SUBJECT> <P>(a) <E T="03">Assembly operations.</E> The assembly operations performed abroad may consist of any method used to join or fit together solid components, such as welding, soldering, riveting, force fitting, gluing, laminating, sewing, or the use of fasteners, and may be preceded, accompanied, or followed by operations incidental to the assembly as illustrated in paragraph (b) of this section. The mixing or combining of liquids, gases, chemicals, food ingredients, and amorphous solids with each other or with solid components is not regarded as an assembly. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>A television yoke is assembled abroad from American-made magnet wire. In the foreign assembly plant the wire is despooled and wound into a coil, the wire cut from the spool, and the coil united with other components, including a terminal panel and housing which are also American-made. The completed article upon importation would be subject to the ad valorem rate of duty applicable to television parts upon the value of the yoke less the cost or value of the American-made wire, terminal panel and housing, assembled therein. The winding and cutting of the wire are either assembly steps or steps incidental to assembly.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>An aluminum electrolytic capacitor is assembled abroad from American-made aluminum foil, paper, tape, and Mylar film. In the foreign assembly plant the aluminum foil is trimmed to the desired width, cut to the desired length, interleaved with paper, which may or may not be cut to length or despooled from a continuous length, and rolled into a cylinder wherein the foil and paper are cut and a section of sealing tape fastened to the surface to prevent these components from unwinding. Wire or other electric connectors are bonded at appropriate intervals to the aluminum foil of the cylinder which is then inserted into a metal can, and the ends closed with a protective washer. As imported, the capacitor is subject to the ad valorem rate of duty applicable to capacitors upon the value less the cost or value of the American-made foil, paper, tape, and Mylar film. The operations performed on these components are all either assembly steps or steps incidental to assembly.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 3.</HD> <P>The manufacture abroad of cloth on a loom using thread or yarn exported from the United States on spools, cops, or pirns is not considered an assembly but a weaving operation, and the thread or yarn does not qualify for the exemption. However, American-made thread used to sew buttons or garment components is qualified for the exemption because it is used in an operation involving the assembly of solid components.</P> </EXAMPLE> <P>(b) <E T="03">Operations incidental to the assembly process.</E> Operations incidental to the assembly process whether performed before, during, or after assembly, do not constitute further fabrication, and shall not preclude the application of the exemption. The following are examples of operations which are incidental to the assembly process:</P> <P>(1) Cleaning;<PRTPAGE P="98"/> </P> <P>(2) Removal of rust, grease, paint, or other preservative coating;</P> <P>(3) Application of preservative paint or coating, including preservative metallic coating, lubricants, or protective encapsulation;</P> <P>(4) Trimming, filing, or cutting off of small amounts of excess materials;</P> <P>(5) Adjustments in the shape or form of a component to the extent required by the assembly being performed abroad;</P> <P>(6) Cutting to length of wire, thread, tape, foil, and similar products exported in continuous length; separation by cutting of finished components, such as prestamped integrated circuit lead frames exported in multiple unit strips; and</P> <P>(7) Final calibration, testing, marking, sorting, pressing, and folding of assembled articles.</P> <P>(c) <E T="03">Operations not incidental to the assembly process.</E> Any significant process, operation, or treatment other than assembly whose primary purpose is the fabrication, completion, physical or chemical improvement of a component, or which is not related to the assembly process, whether or not it effects a substantial transformation of the article, shall not be regarded as incidental to the assembly and shall preclude the application of the exemption to such article. The following are examples of operations not considered incidental to the assembly as provided under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202):</P> <P>(1) Melting of exported ingots and pouring of the metal into molds to produce cast metal parts;</P> <P>(2) Cutting of garment parts according to pattern from exported material;</P> <P>(3) Painting primarily intended to enhance the appearance of an article or to impart distinctive features or characteristics;</P> <P>(4) Chemical treatment of components or assembled articles to impart new characteristics, such as showerproofing, permapressing, sanforizing, dying or bleaching of textiles;</P> <P>(5) Machining, polishing, burnishing, peening, plating (other than plating incidental to the assembly), embossing, pressing, stamping, extruding, drawing, annealing, tempering, case hardening, and any other operation, treatment or process which imparts significant new characteristics or qualities to the article affected.</P> <P>(d) <E T="03">Joining of American-made and foreign-made components.</E> An assembly operation may involve the use of American-made components and foreign-made components. The various requirements for establishing entitlement to the exemption apply only to the American-made components of the assembly. </P> <EXAMPLE> <HD SOURCE="HED">Example.</HD> <P>Diodes are assembled abroad from American-made components. The process includes the encapsulation of the assembled components in a plastic shell. The plastic used for the encapsulation is in the form of a pellet, and is of foreign origin. After the prefabricated diode components are assembled, the assembled unit is placed in a transfer molding machine, where, by use of the pellet, molten epoxy is caused to flow around the perimeters of the assembled components, forming upon solidification a plastic body for the diode. Upon importation, exemption may be granted for the value of the American-made components, but not for the value of the plastic pellet. If the plastic pellet used for encapsulation was of United States origin, its value would still be a part of the dutiable value of the diode, because the plastic pellet is not a fabricated component of a type designed to be fitted together by assembly, but merely a premeasured quantity of material which was applied to the assembled unit by a process not constituting an assembly.</P> </EXAMPLE> <P>(e) <E T="03">Subassembly.</E> An assembly operation may involve the joining or fitting of American-made components into a part or subassembly of an article, followed by the installation of the part or subassembly into the complete article. </P> <EXAMPLE> <HD SOURCE="HED">Example.</HD> <P>Rolls of foil and rolls of paper are exported and cut to specific length abroad and interleaved and rolled to form the electrodes and dielectric of a capacitor. Following this procedure, the rolls are assembled with cans and other parts to form a complete capacitor. The foil and paper are entitled to the exemption.</P> </EXAMPLE> <P>(f) <E T="03">Packing.</E> The packing abroad of merchandise into containers does not in itself qualify either the containers or their contents for the exemption. However, assembled articles which otherwise qualify for the exemption and which are packaged abroad following their assembly will not be disqualified <PRTPAGE P="99"/>from the exemption by reason of their having been so packaged, whether for retail sale or for bulk shipment. The tariff status of the packing materials or containers will be determined in accordance with General Rule of Interpretation 5, HTSUS (19 U.S.C. 1202).</P> <CITA>[T.D. 75-230, 40 FR 43023, Sept. 18, 1975, as amended by T.D. 89-1, 53 FR 51248, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.17</SECTNO> <SUBJECT>Valuation of exempted components.</SUBJECT> <P>The value of fabricated components to be subtracted from the full value of the assembled article is the cost of the components when last purchased, f.o.b. United States port of exportation or point of border crossing as set out in the invoice and entry papers, or, if no purchase was made, the value of the components at the time of their shipment for exportation, f.o.b. United States port of exportation or point of border crossing, as set out in the invoice and entry papers. However, if the appraising officer concludes that the cost or value of the fabricated components so ascertained does not represent a reasonable cost or value, then the value of the components shall be determined in accordance with section 402 or section 402a, Tariff Act of 1930, as amended (19 U.S.C. 1401a, 1402).</P> <CITA>[T.D. 75-230, 40 FR 43024, Sept. 18, 1975]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.18</SECTNO> <SUBJECT>Valuation of assembled articles.</SUBJECT> <P>As in the case of the appraisement of any other import merchandise (see subpart C of part 152 of this chapter), the full value of assembled articles imported under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), is determined in accordance with 19 CFR 152.100 <E T="03">et seq.</E> </P> <CITA>[T.D. 87-89, 52 FR 24445, July 1, 1987, as amended by T.D. 89-1, 53 FR 51248, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§§ 10.19-10.20</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 10.21</SECTNO> <SUBJECT>Updating cost data and other information.</SUBJECT> <P>When a claim for the exemption is predicated on estimated cost data furnished either in advance of or at the time of entry, this fact should be clearly stated in writing at the time of entry, and suspension of liquidation may be requested by the importer or his agent pending the furnishing of actual cost data. Actual cost data must be submitted as soon as accounting procedures permit. To insure that information used for Customs purposes is reasonably current, the importer shall ordinarily be required to furnish updated cost and assembly data at least every six months, regardless of whether he considers that significant changes have occurred. The 6-month period for the submission of updated cost or other data may be extended by the port director if such extension is appropriate for the type of merchandise involved, or because of the accounting period normally used in the trade, or because of other relevant circumstances.</P> <CITA>[T.D. 75-230, 40 FR 43025, Sept. 18, 1975]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.23</SECTNO> <SUBJECT>Standards, quotas, and visas.</SUBJECT> <P>All requirements and restrictions applicable to imported merchandise, such as labeling, radiation standards, flame-retarding properties, quotas, and visas, apply to assembled articles eligible for the exemption in the same manner as they would apply to all other imported merchandise.</P> <CITA>[T.D. 75-230, 40 FR 43025, Sept. 18, 1975]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.24</SECTNO> <SUBJECT>Documentation.</SUBJECT> <P>(a) <E T="03">Documents required.</E> The following documents shall be filed in connection with the entry of assembled articles claimed to be subject to the exemption under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202).</P> <P>(1) <E T="03">Declaration by the assembler.</E> A declaration by the person who performed the assembly operations abroad shall be filed in substantially the following form: </P> <EXTRACT> <P>I, _____, declare that to the best of my knowledge and belief the _____ were assembled in whole or in part from fabricated components listed and described below, which are products of the United States:<PRTPAGE P="100"/> </P> <GPOTABLE CDEF="9,9,8,9,9,9" COLS="6" OPTS="L1"> <BOXHD> <CHED H="1">Marks of identification, numbers</CHED> <CHED H="1">Description of component</CHED> <CHED H="1">Quantity</CHED> <CHED H="1">Unit value at time and place of export from United States <SU>1</SU> </CHED> <CHED H="1">Port and date of export from United States</CHED> <CHED H="1">Name and address of manufacturer</CHED> </BOXHD> <ROW> <ENT I="01"/> </ROW> <ROW> <ENT I="01"/> </ROW> <ROW> <ENT I="01"/> </ROW> <TNOTE> <SU>1</SU> In accordance with U.S. Note 4 to Subchapter II of Chapter 98, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202).</TNOTE> <TNOTE>Description of the operations performed abroad on the exported components (in sufficient detail to enable Customs officers to determine whether the operations performed are within the preview of subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) (attach supplemental sheet if more space is required)):</TNOTE> </GPOTABLE> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">DateSignature</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">AddressCapacity</P> </EXTRACT> <P>(2) <E T="03">Endorsement by the importer.</E> An endorsement, in substantially the following form, shall be signed by the importer: </P> <EXTRACT> <P>I declare that to the best of my knowledge and belief the (above), (attached) declaration, and any other information submitted herewith, or otherwise supplied or referred to, is correct in every respect and there has been compliance with all pertinent legal notes to the Harmonized Tariff Schedule of the United States (19 U.S.C. 1202).</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">DateSignature</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">AddressCapacity</P> </EXTRACT> <P>(b) <E T="03">Revision of format.</E> In specific cases, the port director may revise the format of either of the documents specified in paragraph (a) of this section and may make such changes as conditions warrant, provided the data and information required to be supplied in these documents are presented. For example, if the components were furnished by the importer, the information on components may be supplied as part of the importer's endorsement, rather than as part of the assembler's declaration.</P> <P>(c) <E T="03">Reference to previously filed documents.</E> In lieu of filing duplicate lists of components and descriptions of assembly operations with each entry, the documents specified in paragraph (a) of this section may refer to assembly descriptions and lists of components previously filed with and approved by the port director, or to records showing costs, names of manufacturers, and other necessary data on components, provided the importer has arranged with the port director to maintain such records and keep them available for examination by authorized Customs officers.</P> <P>(d) <E T="03">Waiver of specific details for each entry.</E> There are cases where large quantities of United States components are purchased from various sources or exported at various ports and dates on a continuing basis, so that it is impractical to identify the exact source, port and date of export for each particular component included in an entry of merchandise claimed to be subject to the exemption under subheading 9802.00.80, HTSUS (19 U.S.C. 1202). In these cases, specific details such as the port and date of export and the name of the manufacturer of the United States components may be waived if the port director is satisfied that the importer and assembler have established reliable controls to insure that all components for which the exemption is claimed are in fact products of the United States. These controls shall include strict physical segregation of United States and foreign components, as well as records of United States components showing quantities, sources, costs, dates shipped abroad, and other necessary information. These records shall be maintained by the importer and assembler for 5 years from the date of the released entry in a manner so that they are readily available for audit, inspection, copying, reproduction or other official use by authorized Customs officers.</P> <P>(e) <E T="03">Waiver of documents.</E> When the port director is satisfied that unusual circumstances make the production of either or both of the documents specified in paragraph (a) of this section, or of any of the information set forth therein, impractical and is further satisfied that the requirements of subheading 9802.00.80, HTSUS, and related <PRTPAGE P="101"/>legal notes have been met, he may waive the production of such document(s) or information.</P> <P>(f) <E T="03">Unavailability of documents at time of entry.</E> If either or both of the documents specified in paragraph (a) of this section are not available at the time of entry, a bond on Customs Form 301 containing the bond conditions set forth in § 113.62 of this chapter for the production of the document(s) may be given pursuant to §§ 113.41—113.46 and 141.66 of this chapter.</P> <P>(g) <E T="03">Responsibility of correctness.</E> Subject to the civil and criminal sanctions provided by law for false or fraudulent entries, the importer has the ultimate responsibility for supplying all information needed by the Customs Service to process an entry, and for the completeness and truthfulness of such information. If certain information cannot be supplied by the assembler, it must be provided by the importer.</P> <CITA>[T.D. 75-230, 40 FR 43025, Sept. 18, 1975, as amended by T.D. 79-159, 44 FR 31967, June 4, 1979; T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51248, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.25</SECTNO> <SUBJECT>Textile components cut to shape in the United States and assembled abroad.</SUBJECT> <P>Where a textile component is cut to shape (but not to length, width, or both) in the United States from foreign fabric and exported to another country, territory, or insular possession for assembly into an article that is then returned to the United States and entered, or withdrawn from warehouse, for consumption on or after July 1, 1996, the value of the textile component shall not be included in the dutiable value of the article. For purposes of determining whether a reduction in the dutiable value of an imported article may be allowed under this section:</P> <P>(a) The terms “textile component” and “fabric” have reference only to goods covered by the definition of “textile or apparel product” set forth in § 102.21(b)(5) of this chapter;</P> <P>(b) The operations performed abroad on the textile component shall conform to the requirements and examples set forth in § 10.16 insofar as they may be applicable to a textile component; and</P> <P>(c) The valuation and documentation provisions of §§ 10.17, 10.18, 10.21 and 10.24 shall apply.</P> <CITA>[T.D. 95-69, 60 FR 46196, Sept. 5, 1995; T.D. 95-69, 60 FR 55995, Nov. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.26</SECTNO> <SUBJECT>Articles assembled or processed in a beneficiary country in whole of U.S. components or ingredients; articles assembled in a beneficiary country from textile components cut to shape in the United States.</SUBJECT> <P>(a) No article (except a textile article, apparel article, or petroleum, or any product derived from petroleum, provided for in heading 2709 or 2710, Harmonized Tariff Schedule of the United States (HTSUS)) shall be treated as a foreign article or as subject to duty:</P> <P>(1) If the article is assembled or processed in a beneficiary country in whole of fabricated components that are a product of the United States; or</P> <P>(2) If the article is processed in a beneficiary country in whole of ingredients (other than water) that are a product of the United States; and</P> <P>(3) Neither the fabricated components, materials or ingredients after their exportation from the United States, nor the article before its importation into the United States, enters into the commerce of any foreign country other than a beneficiary country.</P> <P>(b) No article (except a textile or apparel product) entered, or withdrawn from warehouse, for consumption on or after July 1, 1996, shall be treated as a foreign article or as subject to duty:</P> <P>(1) If the article is assembled in a beneficiary country in whole of textile components cut to shape (but not to length, width, or both) in the United States from foreign fabric; or</P> <P>(2) If the article is assembled in a beneficiary country in whole of both textile components described in paragraph (b)(1) of this section and components that are products of the United States; and</P> <P>(3) Neither the components after their exportation from the United States, nor the article before its importation into the United States, enters into the commerce of any foreign country other than a beneficiary country.</P> <P>(c) For purposes of this section:<PRTPAGE P="102"/> </P> <P>(1) The terms “textile article”, “apparel article”, and “textile or apparel product” cover all articles, other than footwear and parts of footwear, that are classifiable in an HTSUS subheading which carries a textile and apparel category number designation;</P> <P>(2) The term “beneficiary country” has the meaning set forth in § 10.191(b)(1); and</P> <P>(3) A component, material, ingredient, or article shall be deemed to have not entered into the commerce of any foreign country other than a beneficiary country if:</P> <P>(i) The component, material, or ingredient was shipped directly from the United States to a beneficiary country, or the article was shipped directly to the United States from a beneficiary country, without passing through the territory of any non-beneficiary country; or</P> <P>(ii) Where the component, material, ingredient, or article passed through the territory of a non-beneficiary country while en route to a beneficiary country or the United States:</P> <P>(A) The invoices, bills of lading, and other shipping documents pertaining to the component, material, ingredient, or article show a beneficiary country or the United States as the final destination and the component, material, ingredient, or article was neither sold at wholesale or retail nor subjected to any processing or other operation in the non-beneficiary country; or</P> <P>(B) The component, material, ingredient, or article remained under the control of the customs authority of the non-beneficiary country and was not subjected to operations in that non-beneficiary country other than loading and unloading and activities necessary to preserve the component, material, ingredient, or article in good condition.</P> <CITA>[T.D. 95-69, 60 FR 46197, Sept. 5, 1995]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Free Entry—Articles for the Use of Foreign Military Personnel</HD> <SECTION> <SECTNO>§ 10.30c</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Temporary Importations Under Bond</HD> <SECTION> <SECTNO>§ 10.31</SECTNO> <SUBJECT>Entry; bond.</SUBJECT> <P>(a)(1) Entry of articles brought into the United States temporarily and claimed to be exempt from duty under Chapter 98, Subchapter XIII, Harmonized Tariff Schedule of the United States (HTSUS), unless covered by an A.T.A. carnet or a TECRO/AIT carnet as provided in part 114 of this chapter, shall be made on Customs Form 3461 or 7533, supported by the documentation required by § 142.3 of this chapter. However, when § 10.36 or § 10.36a is applicable, or the aggregate value of the article is not over $250, the form prescribed for the informal entry of importations by mail, in baggage, or by other means, may be used. When entry is made on Customs Form 3461 or 7533, an entry summary, Customs Form 7501, shall be filed within 10 days after time of entry, in accordance with subpart B, part 142 of this chapter.</P> <P>(2) If Customs Form 7501 is filed at time of entry, it shall serve as both the entry and entry summary, and Customs Form 3461 or 7533 shall not be required. Customs Form 7501 shall be in original only, except for entries under subheading 9813.00.05, HTSUS, which require a duplicate copy for statistical purposes. When articles are entered under an A.T.A. carnet or a TECRO/AIT carnet, the importation voucher of the carnet shall serve as the entry.</P> <P>(3) In addition to the data usually shown on a regular consumption entry summary, each temporary importation bond entry summary shall include:</P> <P>(i) The HTSUS subheading number under which entry is claimed.</P> <P>(ii) A statement of the use to be made of the articles in sufficient detail to enable the port director to determine whether they are entitled to entry as claimed, and</P> <P>(iii) A declaration that the articles are not to be put to any other use and that they are not imported for sale or sale on approval.</P> <P>(b) The port director, if he is satisfied as to the importer's identity and good faith, may admit a vehicle or craft brought in by a nonresident to take part in a race or other specific contest for which no money purse is awarded, under the provisions of subheading 9813.00.35, HTSUS, without formal entry or security for exportation. If at the time of arrival it appears that the article is likely to remain in the <PRTPAGE P="103"/>United States beyond 90 days, formal entry and bond shall be taken.</P> <P>(c) When any article has been admitted without formal entry or security for exportation and the importer thereafter desires to prolong his stay beyond 90 days, an entry covering the article and security for its exportation shall be accepted at any port where the article may be presented for entry. The time during which the imported article may remain in the United States under the entry shall be computed from the date of its original arrival in the United States. The estimated duties for the purpose of fixing the amount of any bond required by paragraph (f) of this section shall be the estimated duties which would have been required to be deposited had the article been entered under an ordinary consumption entry on the date of the original arrival.</P> <P>(d) [Reserved]</P> <P>(e) The entry or invoice shall: (1) Describe each article in detail; (2) set forth the value of each article; and (3) set forth any marks or numbers thereon or other distinguishing features thereof. In the case of a vehicle, aircraft, or pleasure boat entered under subheading 9813.00.05, HTSUS and § 10.36a, the registration number, and engine or motor number, and the body number (if available) shall also be shown on the entry. Examination of the imported articles shall be made whenever the circumstances warrant, and occasionally in any event to an extent which will enable the Customs officer to determine that the importation is in agreement with the invoice or entry as to identity and quantity and for the purpose of accepting the entry under the applicable provisions of Chapter 98, Subchapter XIII, HTSUS. No examination for the purpose of appraisement and no appraisement of the articles shall be made.</P> <P>(f) With the exceptions stated herein, a bond shall be given on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter, in an amount equal to double the duties, including fees, which it is estimated would accrue (or such larger amount as the port director shall state in writing or by the electronic equivalent to the entrant is necessary to protect the revenue) had all the articles covered by the entry been entered under an ordinary consumption entry. In the case of samples solely for use in taking orders entered under subheading 9813.00.20, HTSUS, motion-picture advertising films entered under subheading 9813.00.25, HTSUS, and professional equipment, tools of trade and repair components for such equipment or tools entered under subheading 9813.00.50, HTSUS, the bond required to be given shall be in an amount equal to 110 percent of the estimated duties, including fees, determined at the time of entry. If appropriate a carnet, under the provisions of part 114 of this chapter, may be filed in lieu of a bond on Customs Form 301 (containing the bond conditions set forth in § 113.62 of this chapter). Cash deposits in the amount of the bond may be accepted in lieu of sureties. When the articles are entered under subheading 9813.00.05, 9813.00.20, or 9813.00.50, HTSUS without formal entry, as provided for in §§ 10.36 and 10.36a, or the amount of the bond taken under any subheading of Chapter 98, Subchapter XIII, HTSUS, is less than $25, the bond shall be without surety or cash deposit, and the bond shall be modified to so indicate. In addition, notwithstanding any other provision of this paragraph, in the case of professional equipment necessary for carrying out the business activity, trade or profession of a business person, equipment for the press or for sound or television broadcasting, cinematographic equipment, articles imported for sports purposes and articles intended for display or demonstration, if brought into the United States by a resident of Canada, Mexico or Chile and entered under Chapter 98, Subchapter XIII, HTSUS, no bond or other security will be required if the entered article is a good originating in Canada, Mexico or Chile within the meaning of General Note 12 or 26, HTSUS.</P> <P>(g) Claim for free entry under Chapter 98, Subchapter XIII, HTSUS may be made for articles of any character described therein which have been previously entered under any other provision of law and the entry amended accordingly upon compliance with the requirements of this section, provided the articles have not been released from Customs custody, or even though <PRTPAGE P="104"/>released from Customs custody if it is established that the original entry was made on the basis of a clerical error, mistake of fact, or other inadvertence within the meaning of section 520(c)(1), Tariff Act of 1930, as amended, and was brought to the attention of the Customs Service within the time limits of that section. If an entry is so amended, the period of time during which the merchandise may remain in the Customs territory of the United States under bond shall be computed from the date of importation. In the case of articles covered by an informal mail entry, such a claim may be made within a reasonable time either before or after the articles have been released from Customs custody.</P> <P>(h) After the entry and bond have been accepted, the articles may be released to the importer. The entry shall not be liquidated as the transaction does not involve liquidated duties. However, a TIB importer may be required to file an entry for consumption and pay duties, or pay liquidated damages under its bond for a failure to do so, in the case of merchandise imported under subheading 9813.00.05, HTSUS, and subsequently exported to Canada or Mexico (see § 181.53 of this chapter).</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 66-39, 31 FR 2817, Feb. 17, 1966; T.D. 69-146, 34 FR 9798, June 25, 1969; T.D. 70-89, 35 FR 6002, Apr. 11, 1970; T.D. 79-221, 44 FR 46813, Aug. 9, 1979; 44 FR 51567, Sept. 4, 1979; T.D. 80-26, 45 FR 3901, Jan. 21, 1980; T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51248, Dec. 21, 1988; T.D. 94-1, 58 FR 69470, Dec. 30, 1993; T.D. 95-22, 60 FR 14632, Mar. 20, 1995; T.D. 96-14, 61 FR 2910, Jan. 30, 1996; T.D. 98-10, 63 FR 4167, Jan. 28, 1998; T.D. 01-14, 66 FR 8767, Feb. 2, 2001; CBP Dec. 05-07, 70 FR 10872, Mar. 7, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.33</SECTNO> <SUBJECT>Theatrical effects.</SUBJECT> <P>For purposes of the entry of theatrical scenery, properties and apparel under subheading 9817.00.98, Harmonized Tariff Schedule of the United States:</P> <P>(a) Animals imported for use or exhibition in theaters or menageries may be classified as theatrical properties; and</P> <P>(b) The term “theatrical scenery, properties and apparel” shall not be construed to include motion-picture films.</P> <FP>For provisions relating to the return without formal entry of theatrical effects taken from the United States, see § 10.68 of this part.</FP> <CITA>[T.D. 92-85, 57 FR 40605, Sept. 4, 1992, as amended by CBP Dec. 04-28, 69 FR 52599, Aug. 27, 2004]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.35</SECTNO> <SUBJECT>Models of women's wearing apparel.</SUBJECT> <P>(a) Models of women's wearing apparel admitted under subheading 9813.00.10, Harmonized Tariff Schedule of the United States (HTSUS), shall not be removed from the importer's establishment for reproducing, copying, painting, sketching, or for any other use by others, nor be used in the importer's establishment for such purposes except by the importer or his employees.</P> <P>(b) Invoices covering models of women's wearing apparel entered under subheading 9813.00.10 or 9813.00.25, HTSUS shall state the kind and color of the principal material from which the apparel is made, and shall contain a description of the lining and the trimming, stating whether composed of fur, lace, embroidery, or other material. Invoices shall also contain a statement as to how the trimming is applied, that is, whether on the cuffs, collar, sleeves, or elsewhere, and the total value of each completed garment or article.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 89-1, 53 FR 51248, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.36</SECTNO> <SUBJECT>Commercial travelers' samples; professional equipment and tools of trade; theatrical effects and other articles.</SUBJECT> <P>(a) Samples accompanying a commercial traveler who presents an adequate descriptive list or a special Customs invoice, and professional equipment, tools of trade, and repair components for such equipment or tools imported in his baggage for his own use by a nonresident sojourning temporarily in the United States may be entered on the importer's baggage declaration in lieu of formal entry and examination and may be passed under subheadings 9813.00.20 or 9813.00.50, Harmonized Tariff Schedule of the United States, (HTSUS), at the place of arrival <PRTPAGE P="105"/>in the same manner as other passengers' baggage. The examination may be made by an inspector who is qualified, in the opinion of the port director, to determine the amount of the bond required by § 10.31(c) to be filed in support of the entry. If the articles are a commercial traveler's samples and exceed $500 in value, a special Customs invoice or a descriptive list shall be furnished.</P> <P>(b) When the proprietor or manager of a theatrical exhibition arriving from abroad who has entered his scenery, properties, and apparel under subheading 9813.00.65, HTSUS, contemplates side trips to a contiguous country with the exhibition within the period of time during which the merchandise may remain in the Customs territory of the United States under bond, including any lawful extension, a copy of the entry covering the effects and a copy of a descriptive list of such effects or invoice furnished by him may be certified by the examining officer and returned to the proprietor or manager for use in registering the effects with the Customs officers at the port of exit, and in clearing them through Customs on his return. Cancellation of the bond shall be effected by exportation in accordance with the provisions of § 10.38 at the time the theatrical effects are finally taken out of the United States before the expiration of the period of time during which the merchandise may remain in the Customs territory of the United States under bond, including any lawful extension. Similar treatment may be accorded articles entered under other subheadings in chapter 98, subchapter XIII, HTSUS, upon approval by Headquarters, U.S. Customs Service.</P> <P>(c) When a commercial traveler contemplates side trips to a contiguous country within the period of time during which the merchandise may remain in the Customs territory of the United States under bond, including any lawful extension, a copy of his baggage declaration and a copy of the descriptive list or special Customs invoice furnished by him may be certified by the examining officer and returned to the traveler for use in registering the samples with Customs officers at the port of exit, and in clearing them through Customs upon his return. Cancellation of the bond shall be effected by exportation in accordance with the provisions of § 10.38 at the time the samples are finally taken out of the United States before the expiration of the period of time during which the merchandise may remain in the Customs territory of the United States under bond, including any lawful extension.</P> <P>(d) The privilege of clearance of commercial travelers' samples or professional equipment, tools of trade, and repair components for such equipment or tools imported for his own use by a nonresident sojourning temporarily in the United States on a baggage declaration under bond without surety or cash deposit shall not be accorded to a commercial traveler or such nonresident who, through fraud or culpable negligence, has failed to comply with the provisions of such a bond in connection with a prior arrival.</P> <FP>Such a commercial traveler or nonresident shall be required to file a formal entry under subheading 9813.00.20 or subheading 9813.00.50, HTSUS with a bond supported by a surety or cash deposit in lieu of surety.</FP> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 69-146, 34 FR 9799, June 25, 1969; T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51248, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.36a</SECTNO> <SUBJECT>Vehicles, pleasure boats and aircraft brought in for repair or alteration.</SUBJECT> <P>(a) A vehicle (such as an automobile, truck, bus, motorcycle, tractor, trailer), pleasure boat, or aircraft brought into the United States by an operator of such vehicle, pleasure boat, or aircraft for repair or alteration (as defined in §§ 10.8, 10.490 and 181.64 of this chapter) may be entered on the operator's baggage declaration, in lieu of formal entry and examination, and may be passed under subheading 9813.00.05, Harmonized Tariff Schedule of the United States (HTSUS), at the place of arrival in the same manner as passengers' baggage. When the vehicle, aircraft, or pleasure boat to be entered is being towed by or transported on another vehicle, the operator of the towing or transporting vehicle may make entry for the vehicle, aircraft or pleasure boat to be repaired or altered. The <PRTPAGE P="106"/>bond, prescribed by § 10.31(f), filed to support entry under this section shall be without surety or cash deposit except as provided by this paragraph and paragraph (d) of this section. The examination may be made by an inspector who is qualified to determine the amount of such bond to be filed in support of the entry. The privilege accorded by this paragraph shall not apply when two or more vehicles, pleasure boats, or aircraft are to be entered by the same importer under subheading 9813.00.05, HTSUS, at the same time. In that event, the importer must file a formal entry supported by bond with surety or cash deposit in lieu of surety.</P> <P>(b) Each vehicle, pleasure boat, or aircraft to which paragraph (a) of this section is applicable shall be identified on the operator's baggage declaration, which must include the data prescribed in paragraphs (a) and (e) of § 10.31.</P> <P>(c) Exportation shall be effected in accordance with the provisions of § 10.38.</P> <P>(d) The privilege of clearance of a vehicle, pleasure boat, or aircraft brought in by the operator of such vehicle, pleasure boat, or aircraft, for repair or alteration on his baggage declaration under bond without surety or cash deposit shall not be granted to an individual who has failed to comply with the provisions of such a bond in connection with any prior arrival. Such individual shall be required to file a formal entry under subheading 9813.00.05, HTSUS, with a bond supported by a surety or cash deposit in lieu of surety.</P> <CITA>[T.D. 66-39, 31 FR 2817, Feb. 17, 1966, as amended by T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51248, Dec. 21, 1988; T.D. 94-1, 58 FR 69470, Dec. 30, 1993; CBP Dec. 05-07, 70 FR 10872, Mar. 7, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.37</SECTNO> <SUBJECT>Extension of time for exportation.</SUBJECT> <P>The period of time during which merchandise entered under bond under chapter 98, subchapter XIII, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), may remain in the Customs territory of the United States, may be extended for not more than two further periods of 1 year each, or such shorter period as may be appropriate. Extensions may be granted by the director of the port where the entry was filed upon written application on Customs Form 3173, provided the articles have not been exported or destroyed before the receipt of the application, and liquidated damages have not been assessed under the bond before receipt of the application. Any untimely request for an extension of time for exportation shall be referred to the Director, Commercial Rulings Division, Customs Headquarters, for disposition. Any request for relief from a liquidated damage assessment in excess of a Fines, Penalties, and Forfeitures Officer's delegated authority shall be referred to the Director, International Trade Compliance Division, Customs Headquarters, for disposition. No extension of the period for which a carnet is valid shall be granted.</P> <CITA>[T.D. 69-146, 34 FR 9799, June 25, 1969, as amended by T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51249, Dec. 21, 1988; T.D. 91-77, 56 FR 46114, Sept. 10, 1991; T.D. 99-27, 64 FR 13675, Mar. 22, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.38</SECTNO> <SUBJECT>Exportation.</SUBJECT> <P>(a) Articles entered under chapter 98, subchapter XIII, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202) may be exported at the port of entry or at another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a sufficient length of time in advance of exportation to permit the examination and identification of the articles if circumstances warrant such action and, in such event, the applicant shall be notified on a copy of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495, and the carnet shall be presented for certification.</P> <P>(b) All expenses in connection with the delivery of the articles for examination, the cording and sealing of such articles, and their transfer for exportation shall be paid by the parties in interest.</P> <P>(c) If exportation is to be made at a port other than the one at which the merchandise was entered, the application on Customs Form 3495 shall be <PRTPAGE P="107"/>filed in triplicate. There shall also be filed with the application a certified copy of the import entry or a certified copy of the invoice used on entry.</P> <P>(d) If the goods are examined at one port and are to be exported from another port, they shall be forwarded to the port of exportation under a transportation and exportation entry. In such cases Customs Form 3495 shall be filed in triplicate. Articles entered under a carnet shall not be examined elsewhere than at the port from which they are to be exported.</P> <P>(e) If the articles are to be exported by mail or parcel post, the package containing the articles must be mailed under Customs supervision after examination. Waiver of the right to withdraw the package from the mails shall be endorsed on each package to be so exported and signed by the exporter.</P> <P>(f) Whenever the circumstances warrant, and occasionally in any event, port directors shall cause the fact of exportation to be verified by the Office of Enforcement in harmony with the procedures provided for in §§ 18.7 and 191.61 of this chapter.</P> <P>(g) Upon the presentation of satisfactory evidence to the director of the port at which samples were entered under subheading 9813.00.20, HTSUS, or professional equipment or tools of trade were entered under subheading 9813.00.50, HTSUS, that such articles cannot be exported for the reason that they have been seized (other than by seizure at the suit of private persons), the requirement of exportation shall be suspended for the duration of the seizure. The articles shall be exported promptly after release from seizure.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 69-146, 34 FR 9799, June 25, 1969; T.D. 83-212, 48 FR 46771, Oct. 14, 1983; T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51249, Dec. 21, 1988; T.D. 91-77, 56 FR 46114, Sept. 10, 1991; T.D. 98-16, 63 FR 11004, Mar. 5, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.39</SECTNO> <SUBJECT>Cancellation of bond charges.</SUBJECT> <P>(a) Charges against bonds taken pursuant to Chapter 98, Subchapter XIII, Harmonized Tariff Schedule of the United States, (HTSUS), may be canceled in the manner prescribed in § 113.55 of this chapter. A completed reexportation counterfoil on a carnet establishes that the articles covered by the carnet have been exported, and no claim shall be brought against the guaranteeing association under the carnet for failure to export, except under the provisions of § 114.26 of this chapter. In the case of articles entered under subheading 9813.00.30, HTSUS, which are destroyed because of their use for the purposes of importation, the bond charge shall not be canceled unless there is submitted to the port director a certificate of the importer that the articles were destroyed during the course of a specifically described use, and the port director is satisfied that the articles were so destroyed as articles of commerce within the period of time during which the articles may remain in the Customs territory of the United States under bond (including any lawful extension). Bonds covering articles entered under other provisions of law shall not be canceled upon proof of destruction, except as provided for in paragraph (c) of this section, unless the articles are destroyed under Customs supervision in accordance with section 557, Tariff Act of 1930, as amended, and § 158.43 of this chapter.</P> <P>(b) Where exportation has been made at a port other than the port of entry, the bond may be canceled upon the certificate of lading received from the port of exportation, showing that such exportation was made within the period of time during which the articles may remain in the Customs territory of the United States under bond. In addition, the port director may require the production of a landing certificate signed by a revenue officer of the country to which the merchandise is exported.</P> <P>(c) When articles entered temporarily free of duty under bond are destroyed within the bond period by death, accidental fire, or other casualty, petition for relief from liability under the bond shall be made to the United States Customs Service. The petition shall be accompanied by a statement of the importer, or other person having knowledge of the facts, setting forth the circumstances of the destruction of the articles.</P> <P>(d)(1) If any article entered under Chapter 98, subchapter XIII, HTSUS, except those entered under a carnet, has not been exported or destroyed in <PRTPAGE P="108"/>accordance with the regulations in this part within the period of time during which the articles may remain in the Customs territory of the United States under bond (including any lawful extension), the Fines, Penalties, and Forfeitures Officer shall make a demand in writing under the bond for the payment of liquidated damages equal to double the estimated duties applicable to such entry, unless a different amount is prescribed by § 10.31(f). The demand shall include a statement that a written petition for relief from the payment of the full liquidated damages may be filed with the Fines, Penalties, and Forfeitures Officer within 60 days after the date of the demand. For purposes of this section, the term estimated duties shall include any merchandise processing fees applicable to such entry.</P> <P>(2) If articles entered under a carnet have not been exported or destroyed in accordance with the regulations in this part within the carnet period, the port director shall promptly after expiration of that period make demand in writing upon the importer and guaranteeing association for the payment of liquidated damages in the amount of 110 percent of the estimated duties on the articles not exported or destroyed. The guaranteeing association shall have a period of 6 months from the date of claim in which to furnish proof of the exportation or destruction of the articles under conditions set forth in the Convention or Agreement under which the carnet is issued. If such proof is not furnished within the 6-month period, the guaranteeing association shall forthwith pay the liquidated damages provided for above. The payment shall be refunded if the guaranteeing association within 3 months from the date of payment furnishes the proof referred to above. No claim for payment under a carnet covering a temporary importation may be made against the guaranteeing association more than 1 year after the expiration of the period for which the carnet was valid.</P> <P>(3) Demand for return to Customs custody. When the demand for return to Customs custody is made in the case of merchandise entered under Chapter 98, subchapter XIII, HTSUS (19 U.S.C. 1202), liquidated damages in an amount equal to double the estimated duties on the merchandise not returned shall be demanded, except that in the case of samples solely for use in taking orders, motion-picture advertising films, professional equipment, tools of trade, and repair components for professional equipment and tools of trade, the liquidated damages demanded shall be in an amount equal to 110 percent of the estimated duties.</P> <P>(e) If there has been a default with respect to any or all of the articles covered by the bond and a written petition for relief is filed as provided in part 172 of this chapter, it will be reviewed by the Fines, Penalties, and Forfeitures Officer having jurisdiction in the port where the entry was filed. If the Fines, Penalties, and Forfeitures Officer is satisfied that the importation was properly entered under Chapter 98, subchapter XIII, and that there was no intent to defraud the revenue or delay the payment of duty, the Fines, Penalties, and Forfeitures Officer may cancel the liability for the payment of liquidated damages in any case in his or her delegated authority as follows:</P> <P>(1) If evidence is furnished which satisfies the Fines, Penalties, and Forfeitures Officer that the article would have been entitled to free entry as domestic products exported and returned had the evidence been furnished at the time of entry, without the collection of liquidated damages.</P> <P>(2) If the article has been exported or destroyed under Customs supervision but not within the period of time during which the articles may remain in the Customs territory of the United States under bond, upon the payment of such lesser amount as the port director may deem appropriate under the law and in view of the circumstances, or without the collection of liquidated damages if the Fines, Penalties, and Forfeitures Officer is satisfied that the delay in exportation or destruction was for the benefit of the United States or was occasioned wholly by circumstances reasonably beyond the control of the parties concerned and which could not have been anticipated by a reasonably prudent person.<PRTPAGE P="109"/> </P> <P>(3) If the article was exported or destroyed within the period of time during which the articles may remain in the Customs territory of the United States under bond but not under Customs supervision and satisfactory documentary evidence of actual exportation, such as a foreign landing certificate, or of death or other complete destruction, such as a veterinarian's certificate or certificates of two disinterested witnesses, are furnished together with a complete explanation by the applicant of the failure to obtain Customs supervision, upon the payment of such lesser amount as the Fines, Penalties, and Forfeitures Officer may deem appropriate under the law and in view of the circumstances, or without the collection of liquidated damages if the port director is satisfied that the merchandise was destroyed under circumstances which precluded any arrangement to obtain Customs supervision. Satisfactory documentary evidence of exportation, in the case of carnets, would include the particulars regarding importation or reimportation entered in the carnet by the Customs authorities of another contracting party, or a certificate with respect to importation or reimportation issued by those authorities, based on the particulars shown on a voucher which was detached from the carnet on importation or reimportation into their territory, provided it is shown that the importation or reimportation took place after the exportation which it is intended to establish.</P> <P>(4) Upon the payment of an amount equal to double the duty which would have accrued on the articles had they been entered under an ordinary consumption entry, or equal to 110 percent of such duties where that percentage is prescribed in § 10.31(f), if such amount is determined to be less than the full amount of the bond.</P> <P>(f) <E T="03">Anticipatory breach.</E> If an importer anticipates that the merchandise entered under a Temporary Importation Bond will not be exported or destroyed in accordance with the terms of the bond, the importer may indicate to Customs in writing before the bond period has expired of the anticipatory breach. At the time of written notification of the breach, the importer shall pay to Customs the full amount of liquidated damages that would be assessed at the time of breach of the bond, and the entry will be closed. The importer shall notify the surety in writing of the breach and payment. By this payment, the importer waives his right to receive a notice of claim for liquidated damages as required by § 172.1(a) of this chapter.</P> <P>(g) If the petitioner is not satisfied with the port director's action under this section and submits a supplemental petition, both the original and the supplemental petitions shall be transmitted to the designated Headquarters official with a full report on the case.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 69-146, 34 FR 9799, June 25, 1969; T.D. 70-249, 35 FR 18265, Dec. 1, 1970; T.D. 71-70, 36 FR 4485, Mar. 6, 1971; T.D. 73-308, 38 FR 30549, Nov. 6, 1973; T.D. 74-227, 39 FR 32015, Sept. 4, 1974; T.D. 75-36, 40 FR 5146, Feb. 4, 1975; T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 51249, Dec. 21, 1988; T.D. 91-71, 56 FR 40779, Aug. 16, 1991; T.D. 95-22, 60 FR 14632, Mar. 20, 1995; T.D. 98-10, 63 FR 4167, Jan. 28, 1998; T.D. 99-27, 64 FR 13675, Mar. 22, 1999; T.D. 00-57, 65 FR 53574, Sept. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.40</SECTNO> <SUBJECT>Refund of cash deposits.</SUBJECT> <P>(a) When a cash deposit is made in lieu of surety, it shall be refunded to the person in whose name the entry is made upon exportation in compliance with § 10.38.</P> <P>(b) If any article entered under Chapter 98, subchapter XIII, Harmonized Tariff Schedule of the United States, is not exported or destroyed within the period of time during which articles may remain in the Customs territory of the United States under bond (including any lawful extension), the port director shall notify the importer in writing that the entire cash deposit will be transferred to the regular account as liquidated damages unless a written application for relief from the payment of the full liquidated damages is filed with the port director within 60 days after the date of the notice. If such an application is timely filed, the transfer of the cash deposit to the regular account as liquidated damages shall be deferred pending the decision of the Headquarters, U.S. Customs <PRTPAGE P="110"/>Service or, in appropriate cases, the port director on the application.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 89-1, 53 FR 41249, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">International Traffic</HD> <SECTION> <SECTNO>§ 10.41</SECTNO> <SUBJECT>Instruments; exceptions.</SUBJECT> <P>(a) Locomotives and other railroad equipment, trucks, buses, taxicabs, and other vehicles used in international traffic shall be subject to the treatment provided for in part 123 of this chapter.</P> <P>(b) [Reserved]</P> <P>(c) Foreign-owned aircraft arriving in the United States shall be subject to the treatment provided for in part 122 of this chapter, unless entered under the provisions of §§ 10.31, 10.183, or paragraph (d) of this section.</P> <P>(d) Any foreign-owned locomotive or other railroad equipment, truck, bus, taxicab, or other vehicle, aircraft, or undocumented boat brought into the United States for the purpose of carrying merchandise or passengers between points in the United States for hire or as an element of a commercial transaction, except as provided at §§ 123.12 (a) and (b), 123.14(c), and 141.4(b)(4), is subject to treatment as an importation of merchandise from a foreign country and a regular entry for such vehicle, aircraft or boat will be made. The use of any such vehicle, aircraft, or boat without a proper entry having been made may result in liabilities being incurred under section 592, Tariff Act of 1930, as amended (19 U.S.C. 1592).</P> <P>(e) [Reserved]</P> <P>(f) Material for the maintenance or repair of international cables under the high seas, if requiring storage in special tanks for preservation, may be placed in tanks specially bonded for the purpose and withdrawn therefrom for high-seas installation without the payment of duty and without limitation of the storage period to the usual 3-year warehousing period. International cables laid under the territorial waters of the United States but not brought on shore in the United States shall be admitted without entry or the payment of duty. With respect to international cables laid under the territorial waters of the United States but brought on shore in the United States, only that part of the cable in the United States between the point of entry into the territorial waters of the United States and the first point of support on land in the United States shall be admitted without the payment of duty.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 70-121, 35 FR 8222, May 26, 1970; T.D. 79-160, 44 FR 31956, June 4, 1979; T.D. 84-109, 49 FR 19450, May 8, 1984; T.D. 88-12, 53 FR 9315, Mar. 22, 1988; T.D. 93-66, 58 FR 44130, Aug. 19, 1993; T.D. 99-79, 64 FR 61205, Nov. 10, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.41a</SECTNO> <SUBJECT>Lift vans, cargo vans, shipping tanks, skids, pallets, and similar instruments of international traffic; repair components.</SUBJECT> <P>(a)(1) Lift vans, cargo vans, shipping tanks, skids, pallets, caul boards, and cores for textile fabrics, arriving (whether loaded or empty) in use or to be used in the shipment of merchandise in international traffic are hereby designated as “instruments of international traffic” within the meaning of section 322(a), Tariff Act of 1930, as amended. The Commissioner of Customs is authorized to designate as instruments of international traffic, in decisions to be published in the weekly Customs Bulletin, such additional articles or classes of articles as he shall find should be so designated. Such instruments may be released without entry or the payment of duty, subject to the provisions of this section.</P> <P>(2) Repair components, accessories, and equipment for any container of foreign production which is an instrument of international traffic may be entered or withdrawn from warehouse for consumption without the deposit of duty if the person making the entry or withdrawal from warehouse files a declaration that the repair component was imported to be used in the repair of a container of foreign production which is an instrument of international traffic, or that the accessory or equipment is for a container of foreign production which is an instrument of international traffic. The port director must be satisfied that the importer of the repair component, accessory, or equipment had the declared intention at the time of importation.<PRTPAGE P="111"/> </P> <P>(3) As used in this section, “instruments of international traffic” includes the normal accessories and equipment imported with any such instrument which is a “container” as defined in Article 1 of the Customs Convention on Containers.</P> <P>(b) The reexportation of a container, as defined in Article 1 of the Customs Convention on Containers, which has become badly damaged, shall not be required in the case of a duly authenticated accident if the container (1) is subjected to applicable import duties and import taxes, or (2) is abandoned free of all expense to the Government or destroyed under Customs supervision at the expense of the parties concerned, following the procedure outlined in § 158.43(c) of this chapter. Any salvaged parts and materials shall be subjected to applicable import duties and import taxes. Replaced parts which are not reexported shall be subjected to import duties and import taxes except where abandoned free of expense to the Government or destroyed under Customs supervision at the expense of the parties concerned.</P> <P>(c) The instruments of international traffic designated in paragraph (a) of this section may be released in accordance with the provisions of that paragraph only after the applicant for such release has filed a bond on Customs Form 301, containing the bond conditions set forth in § 113.66 of this chapter. The required application may be filed at the port of arrival or at a subsequent port to which an instrument shall have been transported in bond or to which a container shall have been moved under cover of a TIR carnet (see part 114 of this chapter) showing the characteristics and value of the container on the Goods Manifest of the carnet. If the container is listed on the Goods Manifest of the carnet, the application may be filed at the port of arrival or at the subsequent port. If the container is not listed on the Goods Manifest, the application shall be filed at the port of arrival. When the application is filed at a port other than the port at which the bond is on file, the following procedure applies:</P> <P>(1) When the application is filed before the fact of approval of the applicant's bond has been established, the applicant must submit with the application, or the Customs officer to whom the application is made must obtain, evidence that a current bond is on file at another port. That evidence may consist of a certified copy of the bond, or any other evidence which will satisfy the Customs officer to whom the application is made that a current bond is on file at another port.</P> <P>(2) If the application is filed after the fact of approval of the applicant's bond has been established, a certified copy of that bond need not be filed at the port of release. Upon determination by the appropriate Customs officer that the fact of approval of the applicant's bond has been established, and the bond has not been subsequently discontinued, the instruments of international traffic will be released as provided for in paragraph (a) of this section.</P> <P>(3) Upon the request of the applicant, the appropriate Customs officer at the port at which the instruments of international traffic are to be released will determine whether or not the fact of approval of the applicant's bond has been established. If the approval has not been established, the Customs officer with whom the application has been filed will advise the applicant of the nature of the evidence required to establish the fact that a current bond is on file at another port.</P> <P>(d) If an instrument of foreign origin, or of United States origin which has been increased in value or improved in condition by a process of manufacture or other means while abroad, is released under this section and is subsequently diverted to point-to-point local traffic within the United States, or is otherwise withdrawn in the United States from its use as an instrument of international traffic, it becomes subject to entry and the payment of any applicable duties. An instrument of United States origin which has not been increased in value or improved in condition by a process of manufacture or other means while abroad and which is released under this section shall not be subject to entry or the payment of duty if it is so diverted or otherwise withdrawn.</P> <P>(e) The person who filed the application for release under paragraph (a)(1) <PRTPAGE P="112"/>of this section shall promptly notify a director of a port of entry in the United States as defined in Section 401(k), Tariff Act of 1930, as amended, (1) that the container is to be abandoned or destroyed, as described in paragraph (b) of this section, or (2) that the instrument is the subject of a diversion or withdrawal as described in paragraph (d) of this section, in which event he shall file with the port director a consumption entry for the instrument and pay all import duties and import taxes due on the container or instrument at the rate or rates in effect and in its condition on the date of such diversion or withdrawal.</P> <P>(f)(1) Except as provided in paragraph (j) of this section, an instrument of international traffic (other than a container as defined in Article 1 of the Customs Convention on Containers that is governed by paragraphs (g) (1)-(3) of this section) may be used as follows in point-to-point traffic, provided such traffic is incidental to the efficient and economical utilization of the instrument in the course of its use in international traffic:</P> <P>(i) Picking up and delivering loads at intervening points in the United States while en route between the port of arrival and the point of destination of its imported cargo; or</P> <P>(ii) Picking up and delivering loads at intervening points in the United States while en route from the point of destination of imported cargo to a point where export cargo is to be loaded or to an exterior port of departure by a reasonably direct route to, or nearer to, the place of such loading or departure.</P> <P>(2) Neither use as enumerated in paragraph (f)(1)(i) or (ii) of this section constitutes a diversion to unpermitted point-to-point local traffic within the United States or a withdrawal of an instrument in the United States from its use as an instrument of international traffic under this section.</P> <P>(g)(1) Except as provided in paragraph (j) of this section, a container (as defined in Article 1 of the Customs Convention on Containers) that is designated as an instrument of international traffic is deemed to remain in international traffic provided that the container exits the U.S. within 365 days of the date on that it was admitted under this section. An exit from the U.S. in this context means a movement across the border of the United States into a foreign country where either:</P> <P>(i) All merchandise is unladen from the container; or</P> <P>(ii) Merchandise is laden aboard the container (if the container is empty).</P> <P>(2) The person who filed the application for release under paragraph (a)(1) of this section is responsible for keeping and maintaining such records, otherwise generated and retained in the ordinary course of business, as may be necessary to establish the international movements of the containers. Such records shall be made available for inspection by Customs officials upon reasonable notice.</P> <P>(3) If the container does not exit the U.S. within 365 days of the date on which it is admitted under this section, such container shall be considered to have been removed from international traffic, and entry for consumption must be made within 10 business days after the end of the month in which the container is deemed removed from international traffic. When entry is required under this section, any containers considered removed from international traffic in the same month may be listed on one entry. Such entry may be made at any port of entry. Under 19 U.S.C. 1484(a)(1)(B), the importer of record is required, using reasonable care, to complete the entry by filing with Customs the declared value, classification and rate of duty applicable to the merchandise. The importer of record must use the value of the container as determined in accordance with section 402, Tariff Act of 1930 (19 U.S.C. 1401a), as amended by the Trade Agreements Act of 1979 (TAA).</P> <P>(h) For failure promptly to report the diversion or withdrawal or promptly to make the required entry and pay the duties due, the applicant shall be liable for the payment of liquidated damages equal to the domestic value of the instrument established in accordance with Section 606, Tariff Act of 1930.</P> <P>(i) When an instrument of international traffic, as provided in paragraph (a) of this section, is returned to the United States and released in accordance with the provisions of that <PRTPAGE P="113"/>paragraph, any repairs which may have been made to the instrument while it was abroad are not subject to entry or the payment of duty whether the instrument is of foreign or domestic manufacture, whether it left the United States empty or loaded, and whether or not the repairs made abroad were in contemplation when the instrument left the United States.</P> <P>(j) Containers and other articles designated as instruments of international traffic in accordance with this section are nevertheless subject to the application of the coastwise laws of the United States, with particular reference to Section 883, Title 46, United States Code (see § 4.93 of this chapter).</P> <CITA>[28 FR 14663, Dec. 31, 1963]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 10.41a, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 10.41b</SECTNO> <SUBJECT>Clearance of serially numbered substantial holders or outer containers.</SUBJECT> <P>(a) The holders and containers described in this section may be released without entry or the payment of duty, subject to the provisions of this section.</P> <P>(b) Subject to the approval of a port director pursuant to the procedures described in this paragraph, certain foreign- or U.S.-made shipping devices arriving from Canada or Mexico, including racks, holders, pallets, totes, boxes and cans, need not be serially numbered or marked if they are always transported on or within either intermodal and similar containers or containers which are themselves vehicles or vehicle appurtenances and accessories such as twenty and forty foot containers of general use and “igloo” air freight containers. The following or similar notation shall appear on the vehicle or vessel manifest in relation to such shipping devices which are exempt from serial numbering or marking requirements pursuant to this paragraph: “The shipping devices transported herein, which are not serially numbered or marked, have been exempted from such requirement pursuant to an application approved under 19 CFR 10.41b(b).” Also, pallets and other solid wood shipping devices must be accompanied by an importer document, to the extent that this is required by the U.S. Department of Agriculture, Animal and Plant Health Inspection Service, attesting to the admissibility of such devices as regards plant pest risk, as provided for in 7 CFR 319.40-3.</P> <P>(1) An importer or his agent, regardless of whether the importer is the owner of the foreign- or U.S.-manufactured shipping devices, may apply to a port director of Customs at one of the importer's chiefly utilized Customs ports or the port within which the importer's or agent's recordkeeping center is located for permission to have such shipping devices arriving from Canada or Mexico released without entry and payment of duty at the time of arrival and without the devices being serially numbered or marked. Application may be filed in only one port. Although no particular format is specified for the application, it must contain the information enumerated in paragraph (b)(2) of this section. Any duty which may be due on these shipping devices shall be tendered and paid cumulatively at the time specified in an approved application, which may be either before or after the arrival of the shipping devices in the U.S. (such as, at the time a contract, purchase order or lease agreement is issued).</P> <P>(2) The application shall:</P> <P>(i) Describe the types of shipping devices covered, their classification under the Harmonized Tariff Schedule of the U.S. (HTSUS), their countries of origin, and whether and to whom required duty was paid for them or when it will be paid for them, including duties for repair and modifications to such shipping devices while outside the U.S.;</P> <P>(ii) Identify the intended ports where it is anticipated the shipping devices will be arriving and departing the U.S., as well as the particular movements and conveyances in which they are intended to be utilized;</P> <P>(iii) Describe the applicant's proposed program for accounting for and reporting these shipping devices;<PRTPAGE P="114"/> </P> <P>(iv) Identify the reporting period (which shall in no event be less frequent than annual), as well as the payment period within which applicable duty and fees must be tendered (which shall in no event exceed 90 days following the close of the related reporting period);</P> <P>(v) Describe the type of inventory control and recordkeeping, including the specific records, to be maintained to support the reports of the shipping devices; and</P> <P>(vi) Provide the location in the United States, including the name and address, where the records supporting the reports will be retained by law and will be made available for inspection and audit upon reasonable notice. (The records supporting the reports of the shipping devices must be kept for a period of at least 3 years from the date such reports are filed with the port director.)</P> <P>(3) The application shall be filed along with a continuous bond containing the conditions set forth in § 113.66(c) of this chapter. If the application is approved by the port director and the conditions set forth in the application or of the bond are violated, the port director may issue a claim for liquidated damages equal to the domestic value of the container. If the domestic value exceeds the amount of the bond, the claim for liquidated damages will be equal to the amount of the bond.</P> <P>(4) The port director receiving the application shall evaluate the program proposed to account for, report and maintain records of the shipping devices. The port director may suggest amendments to the applicant's proposal. The port director shall notify the applicant in writing of his decision on the application within 90 days of its receipt, unless this period is extended for good cause and the applicant is so informed in writing. Approval of the application by the port director with whom it is filed shall be binding on all Customs ports nationwide.</P> <P>(5) If the decision is to deny the application, in whole or in part, the port director shall specify the reason for the denial in a written reply, and inform the applicant that such denial may be appealed to the Assistant Commissioner, Office of Field Operations, Customs Headquarters, within 21 days of its date. The Assistant Commissioner's decision shall be issued, in writing, within 30 days of the receipt of the appeal, and shall constitute the final Customs determination concerning the application.</P> <P>(6) If the application is approved, an importer may later apply to amend his application to add or delete particular types of shipping devices listed in the application in which the procedures set forth in the application may be utilized. If a requested amendment to an approved application should be denied, or if an approved application should be revoked, in whole or in part, by the port director, the procedures described in paragraph (b)(5) of this section shall apply.</P> <P>(7) Application for and approval of a reporting program shall not limit or restrict the use of other alternative means for obtaining the release of holders, containers and shipping devices.</P> <P>(c) In the case of serially numbered holders or containers of United States manufacture for which free clearance under subheading 9801.00.10, Harmonized Tariff Schedule of the United States, is claimed, the owner shall place thereon the following markings:</P> <P>(1) 9801.00.10, unless the holder or container has permanently attached thereto the manufacturer's metal tag or plate showing, among other things, the name and address of the manufacturer who is located in the United States.</P> <P>(2) The name of the owner, either positioned as indicated in the example below, or elsewhere conspicuously shown on the holder or container.</P> <P>(3) The serial number assigned by the owner, which shall be one of consecutive numbers and not to be duplicated. For example: 9801.00.10 * * * Zenda * * * 2468.</P> <P>(d)(1) In the case of serially numbered holders or containers of foreign manufacture, other than those provided for in paragraph (d)(2) of this section, for which free clearance under the second provision in subheading 9803.00.50, HTSUS (19 U.S.C. 1202), is claimed, the owner shall place thereon the following markings:</P> <P>(i) 9803.00.50.<PRTPAGE P="115"/> </P> <P>(ii) The district and port code numbers of the port of entry, the entry number, and the last two digits of the fiscal year of entry covering the importation of the holders and containers on which duty was paid.</P> <P>(iii) The name of the owner, either positioned as indicated in the example below, or elsewhere conspicuously shown on the holder or container.</P> <P>(iv) The serial number assigned by the owner, which shall be one of consecutive numbers and not to be duplicated. For example: 9803.00.50 * * * 10-1-366-63 * * * Zenda * * * 2468.</P> <P>(2) In the case of substantial holders or containers of either U.S. or foreign manufacture, specially designed and equipped to facilitate the carriage of goods by one or more modes of transport without intermediate reloading, each having a gross mass rating of at least 18,120 kilograms, for which duty-free entry is requested under either the first or the second proviso in subheading 9803.00.50, HTSUS (19 U.S.C. 1202), is claimed, only the following clear, conspicuous and durable markings are required to be on the container:</P> <P>(i) The identity of the owner or operator of the container.</P> <P>(ii) The serial number assigned by the owner or operator of the container, which shall be one of consecutive numbers and shall not be duplicated.</P> <P>(e) The prescribed markings shall be clear and conspicuous, that is, they shall appear on an exposed side of the holder or container in letters and figures of such size as to be readily discernible. The markings will be stricken out or removed when the holders or containers are taken out of service or when ownership is transferred, except that appropriate changes may be made if a new owner wishes to use the holders and containers under this procedure.</P> <P>(f) The owner shall keep adequate records open to inspection by Customs officers, which shall show the current status of the serially numbered holders and containers in service and the disposition made of such holders and containers taken out of service.</P> <P>(g) Nothing in this procedure shall be deemed to affect:</P> <P>(1) The requirements for outward or inward manifesting of such holders or containers. The manifests will show for each holder or container its markings as provided for herein.</P> <P>(2) The requirements of the Department of Commerce on exportation with respect to the filing of “Shipper's Export Declaration,” Form 7525-V.</P> <P>(3) The treatment of articles covered herein under the coastwise laws of the United States, with particular reference to section 883, Title 46, United States Code.</P> <P>(h) If the holder or container and its contents are to move in bond or under cover of a TIR carnet (see part 114 of this chapter) from the port of arrival intact, the holder or container shall appear on the inward foreign manifest so as to be related to the cargo contained therein and will be released under this procedure at a subsequent port. If the holder or container is to move in bond or under cover of a TIR carnet from the port of arrival not intact with its contents, the holder or container may appear on the inward foreign manifest separate from and not related to the cargo contained therein and will be released under this procedure at the port of arrival before it moves forward and will not appear on the in-bond document.</P> <P>(i) A continuous bond containing the conditions set forth in § 113.66 of this chapter shall be filed with the port director. If the conditions are violated the port director shall issue a claim for liquidated damages equal to the domestic value of the holder or container established in accordance with section 606, Tariff Act of 1930, as amended (19 U.S.C. 1606). If the domestic value exceeds the amount of the bond the claim for liquidated damages will be equal to the amount of the bond.</P> <CITA>[T.D. 56542, 30 FR 15143, Dec. 8, 1965, as amended by T.D. 71-70, 36 FR 4485, Mar. 6, 1971; T.D. 84-213, 49 FR 41165, Oct. 19, 1984; T.D. 86-13, 51 FR 4164, Feb. 3, 1986; T.D. 89-1, 53 FR 51249, Dec. 21, 1988; T.D. 96-20, 61 FR 7989, Mar. 1, 1996; T.D. 97-82, 62 FR 51769, Oct. 3, 1997; T.D. 99-64, 64 FR 43265, Aug. 10, 1999]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Articles for Institutions</HD> <SECTION> <SECTNO>§ 10.43</SECTNO> <SUBJECT>Duty-free status.</SUBJECT> <P>(a) The port director may, at his discretion, require appropriate proof of <PRTPAGE P="116"/>duty-free status for articles for institutions claimed to be exempt from duty under subheadings 9810.00.05, 9810.00.15, 9810.00.25, 9810.00.30, 9810.00.40, 9810.00.45, 9810.00.50, 9810.00.55, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202).</P> <P>(b) Appropriate proof may be a copy of the charter or other evidence of the character of the institution for the use of which the articles are imported.</P> <CITA>[T.D. 85-123, 50 FR 29953, July 23, 1985, as amended by T.D. 89-1, 53 FR 51249, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.46</SECTNO> <SUBJECT>Articles for the United States.</SUBJECT> <P>Pursuant to subheadings 9808.00.10 and 9808.00.20, books, engravings, and other articles therein enumerated, which are imported by authority or for the use of the United States or for the use of the Library of Congress, shall be admitted free of duty upon the written request of the head of the bureau or executive department concerned.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 67-108, 32 FR 6392, Apr. 25, 1967; T.D. 89-1, 53 FR 51249, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.47</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Works of Art</HD> <SECTION> <SECTNO>§ 10.48</SECTNO> <SUBJECT>Engravings, sculptures, etc.</SUBJECT> <P>(a) Invoices covering works of art claimed to be free of duty under subheadings 9702.00.00 and 9703.00.00, HTSUS, shall show whether they are originals, replicas, reproductions, or copies, and also the name of the artist who produced them, unless upon examination the Customs officer is satisfied that such statement is not necessary to a proper determination of the facts.</P> <P>(b) The following evidence shall be filed in connection with the entry: A declaration in the following form by the artist who produced the article, or by the seller, shipper or importer, showing whether it is original, or in the case of sculpture, the original work or model, or one of the first twelve castings, replicas, or reproductions made from the original work or model; and in the case of etchings, engravings, woodcuts, lithographs, or prints made by other hand-transfer processes, that they were printed by hand from hand-etched, hand-drawn, or hand-engraved plates, stones, or blocks: </P> <EXTRACT> <P>I, ____, do hereby declare that I am the producer, seller, shipper or importer of certain works of art, namely ____ covered by the annexed invoice dated ____; that any sculptures or statuary included in that invoice are the original works or models or one of the first twelve castings, replicas, or reproductions made from the sculptor's original work or model; and that any etchings, engravings, woodcuts, lithographs, or prints made by other hand-transfer processes included in that invoice were printed by hand from hand-etched, hand-drawn, or hand-engraved plates, stones, or blocks.</P> </EXTRACT> <P>(c) The port director may waive the declaration requirement set forth in paragraph (b) of this section.</P> <P>(d) Artists' proof etchings, engravings, woodcuts, lithographs, or prints made by other hand-transfer processes should bear the genuine signature or mark of the artist as evidence of their authenticity. In the absence of such a signature or mark, other evidence shall be required which will establish the authenticity of the work to the satisfaction of the port director.</P> <CITA>[T.D. 94-3, 58 FR 68742, Dec. 29, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.49</SECTNO> <SUBJECT>Articles for exhibition; requirements on entry.</SUBJECT> <P>(a) There shall be filed in connection with the entry of works of art and other articles claimed to be free of duty under Chapter 98, Subchapter XII, Harmonized Tariff Schedule of the United States (HTSUS), a declaration by a qualified officer of the institution in sufficient detail to demonstrate entitlement to entry as claimed, and a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter. Claim for free entry under Chapter 98, Subchapter XII may be made for articles of the character described therein which have been previously entered under any other provision of law and the entry amended accordingly upon compliance with the requirements of this section, provided the articles have not been released from Customs custody.</P> <P>(b) The port director may require a copy of the charter or other evidence of the character of the institution for which the articles are imported, and <PRTPAGE P="117"/>may also require the production of the original of any order given by such society or institution to any importing agent or dealer for such articles. The society or institution shall file, within 6 months after the date of filing the entry, any document or proof demanded by the port director in connection with the entry.</P> <P>(c) Articles entered under subheading 9812.00.20, HTSUS, may be transferred from one institution to another upon an application in writing in the case of each transfer describing the articles and stating the name of the institution to which transfer is to be made, provided the sureties to the bond assent in writing under seal or a new bond is filed. No entry or withdrawal shall be required for such a transfer.</P> <P>(d) If any of the articles accorded free entry under Chapter 98, Subchapter XII shall be sold, offered or exposed for sale, transferred, or used in any manner contrary to the provisions of the regulations in this part, within 5 years after the date of entry under such part, the amount of the duties shall be collected immediately by the director of the port of entry and deposited as duties. If the articles are exported or destroyed under Customs supervision within such 5-year period, the liability under the bond shall be treated as terminated.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 89-1, 53 FR 51249, Dec. 21, 1988; T.D. 92-85, 57 FR 40605, Sept. 4, 1992]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.50</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 10.52</SECTNO> <SUBJECT>Painted, colored or stained glass windows for religious institutions.</SUBJECT> <P>When painted, colored, or stained glass windows or parts thereof, are claimed free of duty under subheading 9810.00.10, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), the port director may, at his discretion, require appropriate proof that the importation was designed by, and produced by or under the direction of, a professional artist, and that it is for the use of an institution established solely for religious purposes.</P> <CITA>[T.D. 85-123, 50 FR 29953, July 23, 1985, as amended by T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.53</SECTNO> <SUBJECT>Antiques.</SUBJECT> <P>(a) Articles accompanying a passenger and entitled to entry under the passenger's declaration and entry, or articles entered under an informal entry which are claimed to be free of duty under subheading 9706.00.00, Harmonized Tariff Schedule of the United States (HTSUS), may be admitted free of duty upon the execution of a declaration on the face of the entry provided that the passenger or person filing the informal entry is the owner of the articles and that they are for his personal use and not for sale or other commercial use and provided the Customs officer concerned is satisfied that the articles are of the requisite age.</P> <P>(b) Antiques of the age prescribed by subheading 9706.00.00, HTSUS, or admitted under the provisions of paragraph (e) of this section, shall be admitted free of duty though repaired or renovated. If, however, an antique has been repaired with a substantial amount of additional material, without changing the original form or shape, the original and added portions shall be appraised and reported as separate entities and the basis for such report shall be plainly indicated on the invoice by the appraiser. In such cases duty shall be assessed on the portion added. If the repairs consist of an addition to an article of a feature which changes it substantially from the article originally produced, or if the antique portion has otherwise been so changed as to lose its identity as the article which was in existence prior to the time prescribed in subheading 9706.00.00, HTSUS, the entire article shall be excluded from free entry under subheading 9706.00.00, HTSUS.</P> <P>(c) Except for furniture admitted under the provisions of paragraph (e) of this section, furniture claimed to be free of duty under subheading 9706.00.00, Harmonized Tariff Schedule of the United States (HTSUS) may be entered for consumption at any port of entry within the customs territory of the United States. Furniture as used in <PRTPAGE P="118"/>this section of the regulations is defined as `movable articles of convenience or decoration for use in furnishing a house, apartment, place of business or accommodation'. This definition embraces most articles claimed to be free of duty as antiques.</P> <P>(d) A claim for the free entry of an article under subheading 9706.00.00, HTSUS on the basis of antiquity may be made on the entry, or filed after entry at any time prior to liquidation of the entry, provided the article has not been released from Customs custody or it has been found upon examination before such release to be described in subheading 9706.00.00, HTSUS.</P> <P>(e) Antique articles otherwise prohibited entry by the Endangered Species Act of 1973 (16 U.S.C. 1521, <E T="03">et seq.</E>) may be entered if:</P> <P>(1) The article is composed in whole or in part of any endangered or threatened species listed in 50 CFR 17.11 or 17.12,</P> <P>(2) The article is not less than 100 years of age,</P> <P>(3) The article has not been repaired or modified with any part of any such endangered or threatened species, on or after December 28, 1973,</P> <P>(4) The article is entered at a port designated in § 12.26 of this chapter,</P> <P>(5) A Declaration for Importation or Exportation of Fish or Wildlife (USFWS Form 3-177) is filed at the time of entry with the port director who will forward the form to the U.S. Fish and Wildlife Service, and</P> <P>(6) The importer meets the requirements of paragraph (a) of this section.</P> <P>(f) The additional duty imposed by additional U.S. Note 2, Chapter 97, HTSUS, shall apply to any article which is imported for sale and claimed, either at the time of entry or at a later date, to be free of duty under subheading 9706.00.00, HTSUS, if such article is later found to be unauthentic in respect of the antiquity claimed as a basis for such free entry, unless the claim under subheading 9706.00.00, HTSUS, is withdrawn in writing before the examination of the article for the purpose of appraisement or classification has begun.</P> <P>(g) The additional duty provided for in additional U.S. Note 2, Chapter 97, HTSUS shall not be assessed if the importer established by evidence satisfactory to the port director that the article was not imported for sale. In the case of any article imported in a passenger's baggage or entered under an informal entry, the Customs officer concerned may accept the statement of the owner that the article was not imported for sale if he is satisfied of the truth of such statement.</P> <CITA>[28 FR 14663, Dec. 31, 1963]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 10.53, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 10.54</SECTNO> <SUBJECT>Gobelin and other hand-woven tapestries.</SUBJECT> <P>Pursuant to subheading 5805.00.10, Harmonized Tariff Schedule of the United States, Gobelin tapestries produced in the Manufacture Nationale des Gobelins factories at Paris and Beauvais under the direction and control of the French Government, and other hand-woven tapestries, shall be accorded free entry if of a kind fit only for use as wall hangings, and valued over $215 per square meter.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Vegetable Oils</HD> <SECTION> <SECTNO>§ 10.56</SECTNO> <SUBJECT>Vegetable oils, denaturing; release.</SUBJECT> <P>(a) Olive, palm-kernel, rapeseed, sunflower, and sesame oil shall be classifiable under subheadings 1509.10.20, 1509.10.40, 1509.90.20, 1509.90.40, 1510.00.20, 1512.19.20, 1513.29.00, 1514.90.10, 1514.90.50, 1515.50.00, Harmonized Tariff Schedule of the United States, if denatured abroad or under Customs supervision after importation but before release from Customs custody, at the request and expense of the importer, by a formula prescribed by Headquarters, U.S. Customs Service, or if by their method of production abroad they are rendered unfit for use as food or for any but mechanical or manufacturing purposes.</P> <P>(b) Each cask or package of oil claimed to have been before importation denatured or otherwise rendered <PRTPAGE P="119"/>unfit for use as food or for any but mechanical or manufacturing purposes shall be sampled and tested by an appraising officer.</P> <P>(c) Formulas prescribed by Headquarters, U.S. Customs Service, except proprietary mixtures, will be circulated to all Customs officers and will appear as abstracts of United States Customs Service decisions published in the weekly Customs Bulletins. Proprietary mixtures approved by the Commissioner of Customs will not be published but appropriate notice of their approval will be given to all Customs officers.</P> <P>(d) The Headquarters, U.S. Customs Service, will from time to time prescribe additional formulas, and will consider any formula for special denaturing that may be submitted.</P> <P>(e) The port director may, if he deems it advisable, require an importer requesting permission to use any authorized denaturant to submit to the appraiser an adequate sample of such denaturant, in order that the appraiser may report to the port director whether or not such denaturant is suitable for rendering the oil unfit for use as food or for any but mechanical or manufacturing purposes.</P> <P>(f) No such oil shall be released free of duty until the appraiser shall have made a special report that it has been properly denatured.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 66-182, 31 FR 11416, Aug. 30, 1966; T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Potatoes, Corn, or Maize</HD> <SECTION> <SECTNO>§ 10.57</SECTNO> <SUBJECT>Certified seed potatoes, and seed corn or maize.</SUBJECT> <P>Claim for classification as seed potatoes under subheading 0701.10.00, as seed corn (maize) under subheading 1005.10., HTSUS, shall be made at the time of entry. Such classification shall be allowed only if the articles are white or Irish potatoes, or maize or corn, imported in containers and if, at the time of importation, there is firmly affixed to each container an official tag supplied by the government of the country in which the contents were grown, or an agency of such government. The tag shall bear a certificate to the effect that the specified contents of the container were grown, and have been approved, especially for use as seed. The tag shall also bear a number or other symbol identifying the potatoes or corn in the container with an inspection record of the foreign government or its agency on the basis of which the certificate was issued.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Bolting Cloths</HD> <SECTION> <SECTNO>§ 10.58</SECTNO> <SUBJECT>Bolting cloths; marking.</SUBJECT> <P>(a) As a prerequisite to the free entry of bolting cloth for milling purposes under subheading 5911.20.20, Harmonized Tariff Schedule of the United States, the cloth shall be indelibly marked from selvage to selvage at intervals of not more then 10.16 centimeters with “bolting cloth expressly for milling purposes” in block letters 7.62 centimeters in height. Bolting cloths composed of silk imported expressly for milling purposes shall be considered only such cloths as are suitable for and are used in the act or process of grading, screening, bolting, separating, classifying, or sifting dry materials, or dry materials mixed with water, if the water is merely a carrying medium.</P> <P>(b) Bolting cloths not marked in the manner above indicated at the time of importation may be so marked by the importers in public stores under the supervision of customs officers.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Withdrawal of Supplies and Equipment for Vessels</HD> <SECTION> <SECTNO>§ 10.59</SECTNO> <SUBJECT>Exemption from customs duties and internal-revenue tax.</SUBJECT> <P>(a) A vessel shall not be considered to be actually engaged in the foreign trade, or in trade between the Atlantic and Pacific ports of the United States, or between the United States and its possessions, or between Hawaii and any other part of the United States or between Alaska and any other part of the United States, as the case may be, for the purpose of withdrawing supplies free of duty and internal-revenue tax <PRTPAGE P="120"/>pursuant to section 309(a), Tariff Act of 1930, as amended, unless it is—</P> <P>(1) Operating on a regular schedule in a class of trade which entitles it to the privilege;</P> <P>(2) Actually transporting passengers or merchandise to or from a foreign port, a port on the opposite coast of the United States, or between a port in a possession of the United States and a port in the United States or in another of its possessions, or between Hawaii and any other part of the United States or between Alaska and any other part of the United States;</P> <P>(3) Departing in ballast (without cargo or passengers) from one port for another, domestic or foreign, for the purpose of lading passengers or cargo at the port of destination for carriage in a class of trade specified in section 309(a), Tariff Act of 1930, as amended, for which class of trade the vessel is suitable and substantially ready for service with necessary fittings, outfit, and equipment already installed on its departure in ballast, and from which it is not diverted prior to carriage of passengers or cargo in such trade. A written declaration of the owner or agent of the vessel may be required in connection with the withdrawal, certifying to the vessel's suitableness and substantial readiness with necessary fittings, outfit, and equipment already installed on its departure in ballast for service in a class of trade specified in section 309 and agreeing to notify the port director if it is laid up or diverted from such class of trade prior to the carriage of cargo or passengers in such trade.</P> <P>(b) A withdrawal of articles may not be made under section 309, Tariff Act of 1930, as amended, for use on a trial or test trip of a vessel preparatory to its actually engaging in trades.</P> <P>(c) The classes of articles which may be withdrawn as provided for by section 309, Tariff Act of 1930, as amended, include the containers in which the articles are withdrawn and laden even though for tariff purposes the containers are classifiable separately from their contents, except unusual containers within the purview of General Rule of Interpretation 5, Harmonized Tariff Schedule of the United States (HTSUS).</P> <P>(d) For the purpose of allowing the privileges of section 309, Tariff Act of 1930, as amended, to aircraft as provided for therein, an aircraft shall be deemed to be a vessel within the meaning of each provision of this section and of §§ 10.60 through 10.64 which may be applied to aircraft.</P> <P>(e) A documented vessel with a fisheries license endorsement and foreign fishing vessels of 5 net tons or over may be allowed to withdraw distilled spirits (including alcohol), wines, and beer conditionally free under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), if the port director is satisfied from the quantity requested, in the light of (1) whether the vessel is employed in substantially continuous fishing activities, and (2) the vessel's complement, that none of the withdrawn articles is intended to be removed from the vessel in, or otherwise returned to, the United States without the payment of duty or tax. Such withdrawal shall be permitted only after the approval by the port director of a special written application, in triplicate, on Customs Form 5125, of the withdrawer, supported by a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter executed by the withdrawer. Such application shall be filed with Customs Form 7501 or 7512, as the case may be. The original and the triplicate copy of the application, after approval, shall be stamped with the withdrawal number and date thereof and shall be returned to the withdrawer for use as prescribed below. Approval of each such application shall be subject to the condition that the original and the triplicate copy shall be presented thereafter by the withdrawer or the vessel's master to the port director within 24 hours (excluding Saturday, Sunday, and holidays) after each subsequent arrival of the vessel at a Customs port or station and that an accounting shall be made at the time of such presentation of the disposition of the articles until the port director is satisfied that all of them have been consumed on board, or landed under Custom's supervision, and takes up the original application. (The withdrawer <PRTPAGE P="121"/>shall retain the triplicate copy as evidence of consumption on board or landing under Customs supervision.) The approval shall be subject to the further conditions that any such withdrawn article remaining on board while the vessel is in port shall be safeguarded in the manner and to such extent as the district director for the port or place of arrival shall deem necessary and that failure to comply with the conditions upon which a conditionally free withdrawal is approved shall subject the total quantity of withdrawn articles to the assessment and collection of an amount equal to the duties and taxes that would have been assessed on the entire quantity of supplies withdrawn had such supplies been regularly entered, or withdrawn, for consumption.</P> <P>Exemption from internal-revenue tax on distilled spirits, alcohol, wines, and beer removed from any internal-revenue bonded warehouse, industrial alcohol premises, bonded wine cellar, or brewery; and drawback on taxpaid distilled spirits or wines removed from an export storage room, or on taxpaid beer removed from a brewery (or place of storage elsewhere), for use as supplies on vessels under section 309, Tariff Act of 1930, as amended, are governed by regulations of the Internal Revenue Service.</P> <P>(f) Pursuant to section 309(d) of the Tariff Act of 1930, as amended, the Department of Commerce has found and advised the Secretary of the Treasury of the foreign countries which allow privileges to aircraft registered in the United States substantially reciprocal to those described in sections 309 and 317 of the Tariff Act of 1930, as amended. Advices also have been received of changes and limitations of privileges allowed. In accordance with these advices, Treasury decisions are issued extending to the aircraft of foreign countries free withdrawal privileges reciprocal to those found by the Secretary of Commerce to be extended by those countries to aircraft registered in the United States or making changes in such privileges on the basis of new findings. Listed below by countries are the Treasury decisions issued pursuant to such findings which are currently in effect:</P> <GPOTABLE CDEF="s40,9,r60" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">Country</CHED> <CHED H="1">Treasury Decision(s)</CHED> <CHED H="1">Exceptions if any, as noted—</CHED> </BOXHD> <ROW> <ENT I="01">Abu Dhabi</ENT> <ENT>95-45</ENT> </ROW> <ROW> <ENT I="01">Argentina</ENT> <ENT>54925 (1)<LI>92-20</LI> </ENT> <ENT>Applicable only as to aircraft equipment, spare parts, and supplies.</ENT> </ROW> <ROW> <ENT I="01">Australia</ENT> <ENT>54747 (1)</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Austria</ENT> <ENT>80-68</ENT> </ROW> <ROW> <ENT I="01">Bahamas</ENT> <ENT>52798 (3)</ENT> </ROW> <ROW> <ENT I="01">Bahrain</ENT> <ENT>95-45</ENT> </ROW> <ROW> <ENT I="01">Belgium</ENT> <ENT>52846 (2)</ENT> </ROW> <ROW> <ENT I="01">Benin</ENT> <ENT>71-215,93-</ENT> </ROW> <ROW> <ENT I="01">Bermuda</ENT> <ENT>49944 (4)</ENT> </ROW> <ROW> <ENT I="01">Brazil</ENT> <ENT>53281 (2)</ENT> </ROW> <ROW> <ENT I="01">Canada</ENT> <ENT>69-149<LI>69-245</LI> </ENT> <ENT>Not applicable to ground equipment during period May 1 to September 16, 1969, inclusive.</ENT> </ROW> <ROW> <ENT I="01">Chile</ENT> <ENT>66-128 (2)</ENT> </ROW> <ROW> <ENT I="01">China*</ENT> <ENT>82-91</ENT> </ROW> <ROW> <ENT I="01">Colombia</ENT> <ENT>70-107 (1)</ENT> </ROW> <ROW> <ENT I="01">Costa Rica</ENT> <ENT>53658 (1)</ENT> </ROW> <ROW> <ENT I="01">Cuba</ENT> <ENT>81-198</ENT> <ENT>Applicable only as to aircraft supplies.</ENT> </ROW> <ROW> <ENT I="01">Czechoslovakia</ENT> <ENT>70-107 (1)</ENT> </ROW> <ROW> <ENT I="01">Denmark</ENT> <ENT>51966 (3)</ENT> </ROW> <ROW> <ENT I="01">Dominican Republic</ENT> <ENT>54522 (1)</ENT> </ROW> <ROW> <ENT I="01">Ecuador</ENT> <ENT>52510 (4)</ENT> </ROW> <ROW> <ENT I="01">Egypt</ENT> <ENT>74-3<LI>85-141</LI> </ENT> </ROW> <ROW> <ENT I="01">El Salvador</ENT> <ENT>54675 (1)</ENT> </ROW> <ROW> <ENT I="01">Finland</ENT> <ENT>69-120 (2)</ENT> </ROW> <ROW> <ENT I="01">France</ENT> <ENT>67-96 (1)</ENT> <ENT>Not applicable to tobacco products under section 317 of the tariff act. Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Federal Republic of Germany</ENT> <ENT>69-150</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Greece</ENT> <ENT>54847 (1)</ENT> </ROW> <ROW> <ENT I="01">Guyana</ENT> <ENT>78-28</ENT> </ROW> <ROW> <ENT I="01">Honduras</ENT> <ENT>71-154</ENT> </ROW> <ROW> <ENT I="01">Iceland</ENT> <ENT>67-265 (1)</ENT> </ROW> <ROW> <ENT I="01">India</ENT> <ENT>55155 (1)</ENT> </ROW> <ROW> <ENT I="01">Indonesia</ENT> <ENT>90-61</ENT> <ENT>Applicable only as to aviation fuels and lubricants.</ENT> </ROW> <ROW> <ENT I="01">Iran</ENT> <ENT>75-254</ENT> </ROW> <ROW> <ENT I="01">Ireland</ENT> <ENT>55291 (1)</ENT> </ROW> <ROW> <ENT I="01">Israel</ENT> <ENT>52831 (3)</ENT> </ROW> <ROW> <ENT I="01">Italy</ENT> <ENT>69-223</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Ivory Coast</ENT> <ENT>71-215</ENT> </ROW> <ROW> <ENT I="01">Jamaica</ENT> <ENT>70-250</ENT> </ROW> <ROW> <ENT I="01">Japan</ENT> <ENT>53550 (1), 88-45</ENT> <ENT>Not applicable to ground support equipment as of August 1, 1986</ENT> </ROW> <ROW> <ENT I="01">Jordan</ENT> <ENT>74-102</ENT> </ROW> <ROW> <ENT I="01">Kenya</ENT> <ENT>71-102</ENT> <ENT>Applicable only as to aircraft fuels and lubricants.</ENT> </ROW> <ROW> <ENT I="01">Lebanon</ENT> <ENT>53902 (1)</ENT> </ROW> <ROW> <ENT I="01">Luxembourg</ENT> <ENT>89-77</ENT> <ENT>Applicable only as to aviation fuels.</ENT> </ROW> <ROW> <ENT I="01">Mexico</ENT> <ENT>54506 (5)</ENT> </ROW> <ROW> <ENT I="01">Morocco</ENT> <ENT>75-254</ENT> </ROW> <ROW> <ENT I="01">Netherlands</ENT> <ENT>52494 (2)</ENT> </ROW> <ROW> <ENT I="01">Netherlands Antilles</ENT> <ENT>71-211</ENT> </ROW> <ROW> <ENT I="01">New Zealand</ENT> <ENT>73-52</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Nicaragua</ENT> <ENT>54640 (1)</ENT> </ROW> <ROW> <ENT I="01">Norway</ENT> <ENT>51966 (3)</ENT> </ROW> <ROW> <ENT I="01">Oman</ENT> <ENT>95-45</ENT> </ROW> <ROW> <ENT I="01">Pakistan</ENT> <ENT>55416 (1)</ENT> </ROW> <ROW> <PRTPAGE P="122"/> <ENT I="01">Panama</ENT> <ENT>55453 (1)</ENT> </ROW> <ROW> <ENT I="01">Peru</ENT> <ENT>52911 (2)</ENT> </ROW> <ROW> <ENT I="01">Poland</ENT> <ENT>72-153</ENT> </ROW> <ROW> <ENT I="01">Portugal</ENT> <ENT>68-107 (1)</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Qatar</ENT> <ENT>95-45</ENT> </ROW> <ROW> <ENT I="01">Republic of Korea</ENT> <ENT>71-140</ENT> </ROW> <ROW> <ENT I="01">Republic of the Philippines</ENT> <ENT>71-197</ENT> </ROW> <ROW> <ENT I="01">Romania</ENT> <ENT>75-35</ENT> </ROW> <ROW> <ENT I="01">Saudi Arabia</ENT> <ENT>73-307, 92-68</ENT> </ROW> <ROW> <ENT I="01">Senegal</ENT> <ENT>71-215</ENT> </ROW> <ROW> <ENT I="01">Singapore</ENT> <ENT>93-25</ENT> </ROW> <ROW> <ENT I="01">South Africa</ENT> <ENT>69-162</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Spain</ENT> <ENT>54522 (2)</ENT> </ROW> <ROW> <ENT I="01">Sweden</ENT> <ENT>51966 (3)</ENT> </ROW> <ROW> <ENT I="01">Switzerland</ENT> <ENT>56047</ENT> </ROW> <ROW> <ENT I="01">Taiwan</ENT> <ENT>70-107 (1), 82-91</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Tanzania</ENT> <ENT>71-102</ENT> <ENT>Applicable only as to aircraft fuels and lubricants.</ENT> </ROW> <ROW> <ENT I="01">Thailand</ENT> <ENT>71-138, 89-6</ENT> </ROW> <ROW> <ENT I="01">Trinidad and Tobago</ENT> <ENT>56441 (1)</ENT> </ROW> <ROW> <ENT I="01">Turkey</ENT> <ENT>89-7</ENT> </ROW> <ROW> <ENT I="01">Uganda</ENT> <ENT>71-102</ENT> <ENT>Applicable only as to aircraft fuels and lubricants.</ENT> </ROW> <ROW> <ENT I="01">Union of Soviet Socialist Republics</ENT> <ENT>67-123 (1)</ENT> </ROW> <ROW> <ENT I="01">United Kingdom</ENT> <ENT>69-176</ENT> <ENT>Not applicable to ground equipment.</ENT> </ROW> <ROW> <ENT I="01">Venezuela</ENT> <ENT>55425 (1)</ENT> </ROW> <ROW> <ENT I="01">Yugoslavia</ENT> <ENT>71-138</ENT> </ROW> <ROW> <ENT I="01">Zambia</ENT> <ENT>89-5</ENT> </ROW> <TNOTE>*See also Taiwan</TNOTE> </GPOTABLE> <CITA>[28 FR 14663, Dec. 31, 1963]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 10.59, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 10.60</SECTNO> <SUBJECT>Forms of withdrawals; bond.</SUBJECT> <P>(a) Withdrawals from warehouse shall be made on Customs Form 7501. Each withdrawal shall contain the statement prescribed for withdrawals in § 144.32 of this chapter and all of the statistical information as provided in § 141.61(e) of this chapter. Withdrawals from continuous Customs custody elsewhere than in a bonded warehouse shall be made on Customs Form 7512, except as provided for by paragraph (h) of this section. When a withdrawal of supplies or other articles is made which may be used on a vessel while it is proceeding in ballast to another port as provided for by § 10.59(a)(3), a notation of this fact shall be made on the withdrawal and the name of the other port given if known.</P> <P>(b) If the withdrawal is made by other than the principal on the warehouse or rewarehouse entry, as the case may be, the assent of such principal shall be endorsed on the withdrawal, unless the principal has otherwise authorized such withdrawal in writing.</P> <P>(c) A bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter shall be taken when the withdrawal from warehouse is made by a person other than the principal on the warehouse or rewarehouse entry, as provided for in paragraph (b) of this section.</P> <P>(d) Except as otherwise provided in § 10.62b, relating to withdrawals from warehouse of aircraft turbine fuel to be used within 30 days of such withdrawal as supplies on aircraft under § 309, Tariff Act of 1930, as amended, when the supplies are to be laden at a port other than the port of withdrawal from warehouse, they shall be withdrawn for transportation in bond to the port of lading. Three copies of the manifest on Customs Form 7512, in addition to six copies of the withdrawal on Customs Form 7501, shall be required. The procedure shall be the same as that prescribed in § 144.37 of this chapter (the six copies of Customs Form 7501 taking the place of the entry copies of Customs Form 7512).</P> <P>(e) No bond shall be required in the case of war vessels.</P> <P>(f) Unless transfer is permitted under the provisions of paragraph (h) of this section, when articles are withdrawn from continuous Customs custody elsewhere than in a bonded warehouse for lading at the port of withdrawal, the procedure provided for in § 18.25 of this chapter shall be followed, except that the bond required shall be on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter. Unless transfer is permitted under the provisions of paragraph (h) of this section, when articles are withdrawn from continuous Customs custody elsewhere than in a bonded warehouse for lading at another port, the procedure set forth in § 18.26 of this chapter shall be followed, except that the withdrawal when filed shall be supported by a bond <PRTPAGE P="123"/>on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter. There shall be such examination of the articles as may be necessary to satisfy the port director that they are subject to the privileges of section 309, Tariff Act of 1930, as amended, and that the value and quantity declared for them are correct.</P> <P>(g) A withdrawal under § 10.59(e) shall be supported by a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter.</P> <P>(h) If a request is made for permission to transfer supplies or stores from one vessel to another which would be entitled to withdraw them free of duty and tax under section 309 or 317, Tariff Act of 1930, as amended, the port director in his discretion may permit the articles to be so transferred under Customs supervision under a permit on Customs Form 3171 in lieu of a formal withdrawal under the pertinent statute. In such a case, the pertinent statute shall be indicated by an endorsement made on the permit by the port director.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 73-175, 38 FR 17445, July 2, 1973; T.D. 73-312, 38 FR 30882, Nov. 8, 1973; T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 95-81, 60 FR 52295, Oct. 6, 1995; T.D. 96-18, 61 FR 6777, Feb. 22, 1996]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.61</SECTNO> <SUBJECT>Withdrawal permit.</SUBJECT> <P>Upon the filing of the withdrawal and the execution of the bond, when required, the port director shall issue a permit on Customs Form 7501 or 7512.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 95-81, 60 FR 52295, Oct. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.62</SECTNO> <SUBJECT>Bunker fuel oil.</SUBJECT> <P>(a) <E T="03">Withdrawal under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309).</E> Except as otherwise provided in § 10.62b, relating to withdrawals from warehouse of aircraft turbine fuel to be used within 30 days of such withdrawal as supplies on aircraft under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs bonded tank is intended only for lading duty free as supplies on vessels under section 309 at the port where the tank is located, delivery of the oil, by Customs bonded carrier, cartman, or lighterman (including bonded pipelines), under withdrawals on Customs Form 7501, either single or blanket, may be made without the presence of a Customs officer. When a blanket withdrawal is filed and a partial release takes place, the partial release procedure set forth in § 19.6(d) of this chapter shall be followed for each partial release. However, each abstract copy of Customs Form 7501 shall include the following additional information:</P> <P>(1) Type of oil withdrawn.</P> <P>(2) Number or other identification of sales order therefor.</P> <P>(3) Name of bonded carrier, date it received oil.</P> <P>(4) Receipt signed by master or other person in charge of delivering conveyance identified by number, or name, and if Customs bonded lighterman or cartman, by the carrier's license number.</P> <P>(5) Name and location of vessel obtaining oil.</P> <P>(6) Quantity and identification of each type of oil received with date, and signature and title of receiving officer. If all the oil is laden on the receiving vessel at the port of withdrawal via pipeline from the bonded storage tank, paragraphs (a) (3) and (4) of this section shall be deemed to be inapplicable.</P> <P>(b) If a blanket free withdrawal of bunker fuel oil is filed, to comply with Bureau of the Census requirements the withdrawal on Customs Form 7501 shall be endorsed “Estimated Withdrawals” and limited to the aggregate quantity and value of fuel oil which it is estimated will be physically removed from Customs bond during the calendar month in which the withdrawal is filed for lading on vessels entitled to duty-free vessel supplies under section 309 of the Tariff Act of 1930, as amended.</P> <P>(c)(1) As an incident of the delivery of fuel oils classifiable at different rates of duty to a vessel or vessels under section 309 of the tariff act, the port director may, when necessary to enable a supplier to meet fuel specifications, permit the blending of the oils in the delivering conveyance or in other suitable facilities after withdrawal from the bonded tanks, upon the condition that, to the extent of the amount of oil withdrawn classifiable at the higher <PRTPAGE P="124"/>rate, duty at the higher rate will be paid on any portion of the blended fuel oil not delivered within a reasonable time to a qualified vessel. The withdrawer shall be required to file a withdrawal for consumption for the excess quantity withdrawn. For example, if the quantity withdrawn consists of 1,500 barrels of bunker C fuel oil classifiable at the rate of one-eighth cent per gallon and 500 barrels of diesel oil classifiable at the rate of one-fourth cent per gallon but only 1,400 barrels of the blended oil are actually laden as fuel supplies on qualified vessels, withdrawals for consumption are required for 500 barrels of diesel oil at the higher rate and for 100 barrels of bunker C fuel oil at the lower rate.</P> <P>(2) <E T="03">Delivering transferer receipt.</E> The receipt of the delivering carrier on a copy of Customs Form 7501 for fuel oil which has been blended under paragraph (c)(1) of this section with components classifiable at different rates of duty shall show, for each warehouse entry number and withdrawal number involved, the types and quantity of oil received.</P> <P>(d) Fuel oil withdrawn as vessel supplies at one port may be laden at another port on a vessel or vessels entitled to the free withdrawal privileges of section 309 of the tariff act, under procedures prescribed in this section, provided the movement to the receiving vessel or vessels is under the bond of a qualified carrier as described in § 18.1(a) of this chapter. In such cases, the provisions of § 10.60(d) of this chapter shall be deemed inapplicable.</P> <P>(e) If a vessel not entitled to duty-free withdrawal of supplies from Customs bonded warehouses under section 309 of the Tariff Act of 1930, as amended, should be supplied with fuel oil from a Customs bonded tank described in paragraph (a) of this section because of an emergency, a duty paid withdrawal therefor shall be filed on the first day that the customhouse is open for the general transaction of business after the day on which the oil is laden on the using vessel. If there should be willful or repeated instances of late filing of a duty-paid withdrawal in such cases, the port director shall require a duty-paid withdrawal to be filed prior to the removal of fuel oil from the bonded tank.</P> <P>(f) When the procedures prescribed in this section are followed, representatives of the port director will from time to time verify various withdrawals against all pertinent records, including financial records, of the withdrawers, deliverers, and receivers of the oil. The withdrawer shall maintain all pertinent records relating to the withdrawal, delivery, or receipt of the fuel oil for 5 years from the date of liquidation of the related fuel oil entry.</P> <CITA>[T.D. 69-99, 34 FR 6520, Apr. 16, 1969, as amended by T.D. 79-159, 44 FR 31967, June 4, 1979; T.D. 82-204, 47 FR 49367, Nov. 1, 1982; T.D. 95-81, 60 FR 52295, Oct. 6, 1995; T.D. 96-18, 61 FR 6777, Feb. 22, 1996; T.D. 96-51, 61 FR 31395, June 20, 1996; T.D. 99-33, 64 FR 16347, Apr. 5, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.62a</SECTNO> <SUBJECT>Blanket withdrawals for certain merchandise.</SUBJECT> <P>(a) <E T="03">Generally.</E> Under this section, a blanket withdrawal on Customs Form 7501 may be filed for all or part of any merchandise withdrawn from warehouse except fuel oil covered under § 10.62, for use on qualified vessels. Such a withdrawal shall be made only for lading on board vessels at the port where the warehouse is located. The procedure for the blanket withdrawal and partial releases after the initial release are the same as those provided in § 19.6(d) of this chapter, except as noted in paragraph (b).</P> <P>(b) <E T="03">Partial release.</E> A partial release on Customs Form 7501, in duplicate, or in triplicate if an extra copy is required by the port director, shall be presented to the warehouse proprietor and placed in the proprietor's permit file folder under the partial release procedure set forth in § 19.6(d) of this chapter, as merchandise is needed for delivery to a using vessel. The original of the partial release document shall accompany the merchandise for delivery to the Customs officer who will supervise lading, or if a Customs officer does not physically supervise lading, to the master of the vessel. The original shall be returned to the proprietor for record purposes after the Customs officer or master of the vessel, as appropriate, has <PRTPAGE P="125"/>certified lading of the goods described in the document.</P> <CITA>[T.D. 82-204, 47 FR 49367, Nov. 1, 1982, as amended by T.D. 95-81, 60 FR 52295, Oct. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.62b</SECTNO> <SUBJECT>Aircraft turbine fuel.</SUBJECT> <P>(a) <E T="03">General.</E> Unless otherwise provided, aircraft turbine fuel withdrawn from a Customs bonded warehouse for use under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), may be commingled with domestic or other aircraft turbine fuel after such withdrawal only if such commingling is approved by the appropriate Customs official for the port where the commingling occurs. The appropriate Customs official may approve such commingling if the fueling system in which the commingling will occur contains adequate physical safeguards to prevent the possible unauthorized entry into the Customs territory of the bonded fuel. Such commingled fuel must be accounted for in the same 24-hour period in which it was commingled and must be—</P> <P>(1) Exported within that 24-hour period;</P> <P>(2) Used under section 309 within that 24-hour period; or</P> <P>(3) Entered or withdrawn for consumption, with duty deposited, as required under the applicable regulations (see part 144 of this chapter).</P> <P>(b) <E T="03">Duty-free withdrawal from warehouse of aircraft turbine fuel under section 557(a), Tariff Act of 1930, as amended (19 U.S.C. 1557(a)).</E> Turbine fuel intended for use as supplies on aircraft under section 309, Tariff Act of 1930, as amended, and withdrawn from a Customs bonded warehouse shall be entitled to the privileges provided for in section 309 if an amount equal to or exceeding the quantity of such fuel is established, as provided for in paragraph (c) of this section, to have been used on aircraft qualifying for the privileges provided for in section 309 within 30 days after the withdrawal of the fuel from the Customs bonded warehouse. Withdrawal of aircraft turbine fuel under this paragraph shall be in accordance with the procedures in §§ 10.59 through 10.64, unless otherwise provided in this section. Withdrawals under this paragraph shall be annotated with the term “Withdrawal under 19 CFR 10.62b(b)”.</P> <P>(c) <E T="03">Establishment of use of fuel by qualifying aircraft.</E> (1) The person withdrawing aircraft turbine fuel under paragraph (b) of this section must establish that an aircraft qualifying for the privileges provided for in section 309, Tariff Act of 1930, as amended, used fuel in an amount equal to or exceeding the quantity of the fuel withdrawn that is not entered and upon which duties are not paid by submitting to Customs, at the port where the bonded warehouse entry was filed, within the time provided in paragraph (d) of this section, either—</P> <P>(i) Records prepared in the normal course of business effecting the transfer to identified (<E T="03">e.g.,</E> by aircraft company name, flight number, flight origin and destination, and date of flight) aircraft of fuel in an amount equal to or exceeding the quantity of the fuel withdrawn which is not entered and on which duties are not paid and objective evidence that the aircraft to which the fuel was transferred were actually used in trade qualifying for the privileges provided in section 309, Tariff Act of 1930, as amended; or</P> <P>(ii) A certification (documentary or electronic) that:</P> <P>(A) All of the fuel withdrawn was intended for use on aircraft entitled to the privileges provided for in section 309;</P> <P>(B) Within 30 days of the date of withdrawal from warehouse, an amount of fuel equal to or exceeding the quantity of the fuel withdrawn which is not entered and on which duties are not paid was transferred as supplies to aircraft entitled to the privileges provided for in section 309;</P> <P>(C) All of the aircraft into which fuel is loaded hereunder were used in a trade provided for in section 309; and</P> <P>(D) The person making the certification possesses evidence (documentary or electronic) available for Customs inspection at a named place which supports each of the above statements.</P> <P>(2) Upon request by Customs, the person who submits the certification provided for in paragraph (c)(1) of this section shall promptly provide the evidence required to support the claim for <PRTPAGE P="126"/>treatment under this section (including the records described in § 10.62b(c)(1)(i)) and §§ 10.62 and 19.6(d) and each of the statements in the certification.</P> <P>(d) <E T="03">Time for establishment of use of fuel by qualifying aircraft.</E> The person withdrawing aircraft turbine fuel under paragraph (b) of this section shall submit the records or certification provided for in paragraph (c) of this section by the 40th day after the date of withdrawal of the fuel unless the fuel was withdrawn under a blanket withdrawal under paragraph (g) of this section. If the fuel was withdrawn under a blanket withdrawal, the person withdrawing aircraft turbine fuel under this section shall submit the records or certification provided for in paragraph (c) of this section by the 40th day after all of the fuel covered by the blanket permit to withdraw has been withdrawn.</P> <P>(e) <E T="03">Treatment of turbine fuel withdrawn but not used on qualifying aircraft within 30 days.</E> If turbine fuel is withdrawn from a Customs bonded warehouse under paragraph (b) of this section but fuel in an amount less than the quantity withdrawn is established to have been used within 30 days of the date of withdrawal from warehouse on aircraft qualifying for the privileges provided for in section 309, Tariff Act of 1930, as amended, a withdrawal for consumption shall be filed and duties shall be deposited for the excess of fuel so withdrawn over that used on aircraft so qualifying. Such withdrawal shall be filed and such duties shall be deposited by the 40th day after the date of withdrawal of the fuel in accordance with the procedures in § 144.38 of this chapter. Interest shall be payable and deposited with such duties, calculated from the date of withdrawal at the rate of interest established under 26 U.S.C. 6621.</P> <P>(f) <E T="03">Liquidated damages.</E> Failure to account for turbine fuel withdrawn under paragraphs (b) through (h) of this section shall result in liquidated damages against the person withdrawing the turbine fuel, as provided for under § 113.62 of this chapter. Such failure to account for turbine fuel includes:</P> <P>(1) The failure to timely file the withdrawal for consumption and payment of duty, with interest, on the quantity of fuel so withdrawn in excess of the quantity of fuel established to have been used on qualifying aircraft within 30 days of withdrawal, as provided for in paragraph (e) of this section;</P> <P>(2) The failure to timely file the evidence or certification establishing such use of the fuel which is not entered and on which duties are not paid, as provided for in paragraph (c) of this section; or</P> <P>(3) The failure to promptly provide the evidence required to support the claim for treatment under paragraph (b) of this section, upon request by Customs, as provided for in paragraph (c)(2) of this section.</P> <P>(g) <E T="03">Blanket withdrawals.</E> Blanket withdrawals, as provided for in §§ 10.62 and 19.6(d), may be used for withdrawals from warehouse under section 557(a), Tariff Act of 1930, as amended, and paragraphs (b) through (h) of this section, under the procedures provided in §§ 10.62 and 19.6(d) except that—</P> <P>(1) Application by the withdrawer for a blanket permit to withdraw shall be on the warehouse entry, or on the warehouse entry/entry summary when used as an entry, annotated with the words “Some or all of the merchandise will be withdrawn under blanket permit per §§ 10.62, 10.62b, and 19.6(d).”;</P> <P>(2) Turbine fuel withdrawn under a blanket permit as authorized in this paragraph may be delivered at a port other than the port of withdrawal;</P> <P>(3) Customs acceptance of a properly completed application for a blanket permit to withdraw, on the warehouse entry or warehouse entry/entry summary, will constitute approval of the blanket permit to withdraw;</P> <P>(4) A copy of the approved blanket permit to withdraw will be delivered to the warehouse proprietor, whereupon fuel may be withdrawn under the terms of the blanket permit;</P> <P>(5) The withdrawal document to be placed in the proprietor's permit file folder (see § 19.6(d)(2)) will be a commercially acceptable document of receipt (such as a “withdrawal ticket”) issued by the warehouse proprietor, identified with a unique alpha-numeric code and containing the following information:</P> <P>(i) Identity of withdrawer;<PRTPAGE P="127"/> </P> <P>(ii) Identity of warehouse and tank from which fuel is withdrawn;</P> <P>(iii) Date of withdrawal;</P> <P>(iv) Type of merchandise withdrawn; and</P> <P>(v) Quantity of merchandise withdrawn.</P> <P>(6) The date of withdrawal, for purposes of calculating the 30-day period in which fuel must be used on qualifying aircraft under this section, shall be the date on which physical removal of the fuel from the warehouse commences;</P> <P>(7) The blanket permit summary prepared by the proprietor as provided for in § 19.6(d)(4) shall be prepared when all of the fuel covered by the blanket permit has been withdrawn and shall account for all merchandise withdrawn under the blanket permit, as required by § 19.6(d)(4), by stating, in summary form, the unique alpha-numeric codes and information required in paragraph (g)(5) of this section, as well as the identity of the warehouse entry to which the withdrawal is attributed;</P> <P>(8) The certification on the blanket permit summary (see § 19.6(d)(4)) shall be that the merchandise listed thereunder was withdrawn in compliance with §§ 10.62, 10.62b, and 19.6(d); and</P> <P>(9) The person withdrawing aircraft turbine fuel under these blanket procedures shall submit the records or certification provided for in § 10.62b(c) by the 40th day after all of the fuel covered by the blanket permit has been withdrawn (see § 10.62b(d)). At the discretion of the port director for the port where blanket withdrawal was approved, submission of the records and evidence required to establish use of the fuel on qualifying aircraft may be required to be submitted electronically, in a format compatible with Customs electronic record-keeping systems.</P> <P>(h) <E T="03">Recordkeeping.</E> The person withdrawing aircraft turbine fuel from warehouse under this section is subject to the recordkeeping requirements in 19 U.S.C. 1508 and 1509, as provided for in part 162 of this chapter.</P> <CITA>[T.D. 96-18, 61 FR 6778, Feb. 22, 1996, as amended by T.D. 99-33, 64 FR 16347, Apr. 5, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.63</SECTNO> <SUBJECT>Landing of supplies and stores from receiving vessel in the United States.</SUBJECT> <P>Supplies or stores laden on a vessel duty and tax free under section 309, Tariff Act of 1930, as amended, may be landed under Customs supervision under proper permit, the same as if they had been laden in a foreign country. See § 4.39 of this chapter. Except when transfer to another vessel entitled to the free withdrawal privilege is permitted under the original withdrawal under section 309, Tariff Act of 1930, as amended, the landed articles shall be treated as an importation from a foreign country.</P> <CITA>[28 FR 14663, Dec. 31, 12963, as amended by T.D. 89-1, 53 FR 51250, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.64</SECTNO> <SUBJECT>Crediting or cancellation of bonds.</SUBJECT> <P>(a) Except as stated below, a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter may be credited or canceled in respect of such articles upon the vessel's departure from the port of lading in a class of trade or business entitling the articles to exemption from duty and tax under the statute. The withdrawer shall cause the merchandise to be delivered to the lading vessel, and shall provide such evidence of lading as required by the port director within 30 days after lading, except as provided in this section. If the vessel is not operated by the United States and proceeds in ballast from the port where the articles are laden to another port to lade passengers or cargo for carriage in a class of trade specified in section 309, Tariff Act of 1930, as amended, the bond may be credited or canceled upon the filing with the director of the port of withdrawal within 3 months after the date of withdrawal of a proper declaration as prescribed below. The declaration shall be executed by one of the following who has knowledge of the facts:</P> <P>(1) The operations manager or port captain for the vessel on which the articles are laden but not a representative of the supplier.</P> <P>(2) The master or other officer of the vessel on which the articles are laden. The declaration shall be in substantially the following form: </P> <EXTRACT> <PRTPAGE P="128"/> <P SOURCE="P-DASH">I,</P> <FP>(Operations manager, port captain, master, or other officer) of the vessel ______ declare that I have knowledge of the facts set forth herein, and that upon the lading of the articles described below covered by withdrawal No. ____, filed at ________(Name of port), the vessel then proceeded in ballast to ________(Name of port) to lade cargo or passengers; that the vessel was suitable for service in the class of trade checked below with fittings, outfit, and equipment for such trade already installed when it so departed in ballast; and that upon arrival it proceeded to engage in the carriage of cargo or passengers in such trade, except as stated below:</FP> <FP SOURCE="FP-DASH"/> <FP SOURCE="FRP">(If no exception, note “None”)</FP> <FP SOURCE="FP-2">1. Foreign Trade.</FP> <FP SOURCE="FP-2">2. Trade between Atlantic and Pacific ports of the United States, when such trade is not prohibited by coastwise laws.</FP> <FP SOURCE="FP-2">3. Trade between the United States and any of its possessions, when such trade is not prohibited by coastwise laws.</FP> <FP SOURCE="FP-2">4. Trade between Alaska or Hawaii and any other part of the United States, when such trade is not prohibited by coastwise laws.</FP> <P>Description of articles:</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-DASH"/> <HALFDASH/> <FP SOURCE="FRP">(Name and title)</FP> </EXTRACT> <P>(b) A declaration as to the intended business or trade of a vessel may, in the discretion of the port director, be accepted in lieu of a declaration prescribed in paragraph (a) of this section when the amount of duty or tax, or both, involved in a single lading is less than $100.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 84-213, 49 FR 41166, Oct. 19, 1984]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.64a</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 10.65</SECTNO> <SUBJECT>Cigars and cigarettes.</SUBJECT> <P>(a) Imported cigars and cigarettes in bonded warehouse or otherwise in Customs custody, and such articles manufactured with the use of imported materials in a bonded manufacturing warehouse of class 6, may be withdrawn under section 317, Tariff Act of 1930, as amended, for consumption beginning beyond the 3-mile limit or international boundary, as the case may be, (1) on vessels actually engaged in the foreign, intercoastal, or noncontiguous territory trade within the purview of § 10.59(a); (2) on vessels departing from the port where the withdrawal is made directly for a foreign port, a port on the opposite coast, or a port in one of the possessions of the United States; or (3) on vessels of war or other governmental activity.</P> <P>(b) The privilege shall not be granted to vessels stationed in American waters for an indefinite period without sailing schedules, nor shall it be granted to aircraft of foreign registry of a country for which there is not in effect a finding and advice by the Department of Commerce under section 309(d), Tariff Act of 1930, as amended, that such country allows privileges to aircraft registered in the United States substantially reciprocal to those described in section 317, Tariff Act of 1930, as amended. See section 10.59(f).</P> <P>(c) With the following additions and exceptions, the same procedure shall be followed as in the case of withdrawals under section 309(a), Tariff Act of 1930, as amended.</P> <P>(1) No bond shall be required in the case of vessels operated by the United States Government.</P> <P>(2) When a shipping case containing cigars and cigarettes is made up of a number of units, each in a separate package, such units may be withdrawn separately, provided each unit is marked and numbered for identification and contains not less than 250 cigars or 1,000 cigarettes. In the case of imported cigars and cigarettes so packed, only one unit from each shipping case shall be opened for examination, unless the port director shall deem it necessary for the protection of the revenue to examine a greater quantity. Imported tobacco products on which the duty or internal-revenue tax has been paid may not be withdrawn under section 317, Tariff Act of 1930, as amended, with a drawback of such duty or internal-revenue tax.</P> <P>(3) When all the units in such shipping case are not to be withdrawn at the same time or for use on the same vessel, a blanket withdrawal may be filed for the entire case in lieu of a separate withdrawal for each unit. In such event, the withdrawal shall be retained <PRTPAGE P="129"/>by the warehouse proprietor until delivery receipts are obtained for the entire quantity covered by the withdrawal, provided the total period of time prior to delivery to the using vessel or aircraft does not exceed 5 years. A bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter, when required, shall be filed at the time of or prior to the removal of any of the merchandise from the warehouse for delivery to the vessel on which it is to be used.</P> <P>(4) Merchandise for which blanket withdrawals are filed shall be stored in a separate room or enclosure in a bonded warehouse under separate locks, and the merchandise clearly marked to show that it has been withdrawn. If, at the time of any such inventory, any merchandise is missing and not properly accounted for, duties shall be paid thereon before any further withdrawals are permitted.</P> <P>(5) The declaration of use, when required, shall include a statement that consumption of the articles covered by the withdrawal did not begin until the withdrawing vessel or aircraft had proceeded beyond the 3 mile limit or the international boundary.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 67-193, 32 FR 11764, Aug. 16, 1967; T.D. 70-73, 35 FR 5400, Apr. 1, 1970; T.D. 82-204, 47 FR 49368, Nov. 1, 1982; T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Articles Exported for Exhibition, Etc.</HD> <SECTION> <SECTNO>§ 10.66</SECTNO> <SUBJECT>Articles exported for temporary exhibition and returned; horses exported for horse racing and returned; procedure on entry.</SUBJECT> <P>(a) In connection with the entry of articles, including livestock or other animals, exported for temporary exhibition and returned and claimed to be exempt from duty under subheading 9801.00.50 or 9801.00.60, Harmonized Tariff Schedule of the United States (HTSUS), there shall be filed:</P> <P>(1) A certificate of exportation on Customs Form 3311;</P> <P>(2) A declaration of the importer on Customs Form 4455 for articles of either domestic or foreign origin; and</P> <P>(3) In the case of animals of foreign origin taken abroad for exhibition in connection with a circus or menagerie, a copy of an inventory of these animals filed prior to their leaving the country with the director of the port of their departure.</P> <P>(b) If it is shown to be impracticable to produce the certificate of exportation required under paragraph (a)(1) of this section, the port director may accept other satisfactory evidence of exportation, or may take a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter to secure the production of such certificate or other evidence.</P> <P>(c) Articles claimed to be exempt from duty under subheading 9801.00.50 or 9801.00.60, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), may be returned free of duty without formal entry and without regard to the requirements of paragraph (a) or (b) of this section if:</P> <P>(1) Prior to the exportation of such articles, an application on Customs Form 4455 (accompanied by an appropriate inventory, when required by law or by the port director) is filed with a declaration thereon that:</P> <P>(i) Any right to drawback of Customs duties with respect to that shipment was waived;</P> <P>(ii) Any internal revenue tax due has been paid and no refund thereof will be sought; and</P> <P>(iii) The merchandise was identified, registered, and exported in accordance with the regulations set forth in §§ 10.8(e), (g), (h), and (i), governing the exportation of articles sent abroad for repairs, and</P> <P>(2) Upon return, a duplicate Customs Form 4455 (with accompanying inventory where one was required) is filed.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 74-242, 39 FR 33794, Sept. 20, 1974; T.D. 75-235, 40 FR 44319, Sept. 26, 1975; T.D. 78-153, 43 FR 23709, June 1, 1978; T.D. 82-224, 47 FR 53727, Nov. 29, 1982; T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988; T.D. 94-1, 58 FR 69470, Dec. 30, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.67</SECTNO> <SUBJECT>Articles exported for scientific or educational purposes and returned; procedure on entry.</SUBJECT> <P>(a) In connection with each entry of articles exported for scientific or educational purposes and returned under <PRTPAGE P="130"/>subheading 9801.00.40, Harmonized Tariff Schedule of the United States (HTSUS), the following shall be required, irrespective of the value of the shipment:</P> <P>(1) A certificate of exportation on Customs Form 3311;</P> <P>(2) A declaration by the foreign shipper in the same form as that prescribed in § 10.66(a)(2) but stating that such articles were sent from the United States solely for temporary scientific or educational use and describing the specific use to which they were put while abroad.</P> <P>(3) A declaration of the ultimate consignee in substantially the following form: </P> <EXTRACT> <FP>Port of ________, Port Director's Office, ____, 19__.</FP> <P>I, __________, declare that the several articles described in the annexed entry are, to the best of my knowledge and belief, the identical articles exported from the United States on the ___ day of ______, 19__, by _________ (Actual shipper) address ________, for the account of ________, address ________that they are returned to ________, address ________, for the account of ________, address _______ that the said articles were exported solely for temporary scientific or educational purposes and for no other use abroad than for exhibition, examination, or experimentation; that they are being returned without having been changed in condition in any manner, except by reason of their bona fide use as follows:</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FRP">(Describe change in condition)</FP> <FP SOURCE="FP-DASH"/> <HALFDASH/> <FP SOURCE="FRP">(Ultimate consignee)</FP> </EXTRACT> <P>(b) If it is shown to be impracticable to produce the certificate of exportation required by paragraph (a)(1) of this section, the port director may accept other satisfactory evidence of exportation. The port director may take a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter to secure the subsequent production of any of the evidence or documents required by paragraph (a) of this section which are not available at the time of entry.</P> <P>(c) If, prior to the exportation of articles claimed to be exempt from duty under subheading 9801.00.40, Harmonized Tariff Schedule of the United States (HTSUS), an application on Customs Form 4455 (accompanied by an appropriate inventory when, in the discretion of the port director, such inventory is deemed necessary) was filed, such articles may be returned for the account of the exporter free of duty without formal entry, without regard to the requirements of paragraphs (a) and (b) of this section, upon the filing of the duplicate Customs Form 4455 (with accompanying inventory, if one was required), and a declaration of the ultimate consignee in substantially the form set forth in paragraph (a)(3) of this section.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 74-242, 39 FR 33794, Sept. 20, 1974; T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 89-1, 53 FR 51250, Dec. 21, 1988; T.D. 94-1, 58 FR 69470, Dec. 30, 1993; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Theatrical Effects, Motion-Picture Films, Commercial Travelers' Samples, and Tools of Trade</HD> <SECTION> <SECTNO>§ 10.68</SECTNO> <SUBJECT>Procedure.</SUBJECT> <P>(a) Theatrical scenery, properties, and effects, motion-picture films (including motion-picture films taken aboard a vessel for exhibition only during an outward voyage and returned for the same purpose during an inward voyage on the same or another vessel), commercial travelers' samples, and professional books, implements, instruments, and tools of trade, occupation, or employment (see § 148.53 of this chapter), of domestic or foreign origin, taken abroad may be returned without formal entry and without payment of duty if an exportation voucher from a carnet, when applicable, or an application on Customs Form 4455 was filed, and the merchandise was identified as set forth in § 10.8, before exportation of the articles. Articles exported under cover of an A.T.A. carnet (where the carnet serves as the control document) may, in accordance with this paragraph, be returned without entry or the payment of duty. If Customs Form 4455 is utilized, commercial travelers' samples, professional books, implements, instruments, and tools of trade, occupation, or employment may be returned with either an informal entry or a declaration on Customs Form 3299; <PRTPAGE P="131"/>theatrical scenery, properties, and effects and motion-picture films may be returned only with an informal entry. When articles other than those exported by mail or parcel post are examined and registered at one port and exported through another port, the port director may require proof of exportation in those cases where the carnet or Customs Form 4455 does not reflect that these articles were exported under Customs supervision. In the case of commercial travelers' samples taken abroad for temporary use, except where exportation involves certification of a carnet, port directors may waive examination of the samples at the time of exportation. When motion-picture films are to be taken aboard a vessel for exhibition only during an outward voyage and are to be returned for the same purpose during an inward voyage on the same or another vessel, port directors may waive examination and supervision at the time of exportation. When theatrical scenery, properties, and effects are taken abroad in sealed carload lots by rail for temporary use, the cars must be sealed by U.S. Customs officers for entry at any Canadian or Mexican port where U.S. Customs officers are stationed. Application and examination before the time of exportation is waived if a Customs Form 4455 is filed with the U.S. Customs officer in the appropriate Canadian or Mexican port, and that officer examines the articles before they are released from foreign customs custody by the foreign customs officer.</P> <P>(b) When any such articles are to be returned to the United States from a contiguous foreign country in which a United States Customs officer is stationed, the articles may be presented to such officer with the duplicate copy of the application for examination and comparison with the descriptive list. Upon completion of such examination, the packages containing the articles shall be corded and sealed or forwarded in cars sealed by Customs officers and shall be manifested in the same manner as personal baggage. Articles so treated shall be released upon arrival in the United States and removal of the seals by Customs officers.</P> <P>(c) When commercial travelers' samples consisting of raw cotton are taken to and returned from Canada, the application on Customs Form 4455 shall be executed in triplicate, two copies thereof to be returned to the traveler for surrender to the Customs officer on the return of the samples from Canada.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 69-146, 34 FR 9801, June 25, 1969; T.D. 75-41, 40 FR 6646, Feb. 13, 1975; T.D. 82-49, 47 FR 12160, Mar. 22, 1980; T.D. 82-116, 47 FR 27261, June 24, 1982]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.69</SECTNO> <SUBJECT>Samples to Great Britain and Ireland under reciprocal agreement.</SUBJECT> <P>Descriptive lists of samples taken to Great Britain and Ireland by commercial travelers of the United States under the joint declarations of December 3 and 8, 1910 (State Department treaty series 552), shall be required in triplicate, verified by the affidavit of the commercial traveler before a Customs officer, and shall show that the samples are for use as models or patterns for the purpose of obtaining orders and not for sale and that the lists contain a full description of the articles. One copy shall be retained and the others shall be delivered to the commercial traveler—one for the identification of the samples on their return to the United States and one for the use of the foreign customs authorities. The latter copy must have been attested by a consular officer of the country concerned in the United States.</P> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Animals and Birds</HD> </SUBJGRP> <CROSSREF> <HD SOURCE="HED">Cross Reference:</HD> <P>For regulations with respect to recognition of breeds and purebred animals, see 9 CFR part 151.</P> </CROSSREF> <SECTION> <SECTNO>§ 10.70</SECTNO> <SUBJECT>Purebred animals for breeding purposes; certificate.</SUBJECT> <P>(a) In connection with the entry of purebred animals for breeding purposes under subheading 0101.11.00, Harmonized Tariff Schedule of the United States (HTSUS), no claim for free entry shall be allowed in liquidation of the entry until the port director has received from the Department of Agriculture a certificate that the animal is purebred of a recognized breed and duly registered in a book of record recognized by the Secretary of Agriculture for that breed. Importers are required <PRTPAGE P="132"/>by regulation of the Department of Agriculture to make application for a certificate of pure breeding to the U.S. Department of Agriculture, Animal and Plant Health Inspection Service, Veterinary Services, on ANH Form 17-338 before the animal will be examined as required by 9 CFR 151.7. Application for the certificate must be executed by the owner agent, or importer and filed at a port of entry designated in the regulations of the Department of Agriculture for the importation of animals (9 CFR 92.3). However, applications for certificates for dogs (other than dogs for handling livestock regulated under 9 CFR 92.18) and cats may be filed either at a designated port of entry or at any other port where Customs entry is made. The regulations of the Department of Agriculture prescribing the requirements for the issuance of certificates of pure breeding provide that all animals imported under such regulations must be accompanied to the port at which examination is to be made by certificates of pedigree and transfer of ownership in order that identification may be accomplished, and that, if such animals are moved from such port prior to the presentation of such certificates and transfers, such action shall constitute a waiver of any further claim to certification under such regulations.</P> <P>(b) In the cases of cats and dogs arriving at Canadian border ports, Customs officers and employees are hereby authorized and directed to make the examination required by such regulations of the Department of Agriculture. Customs officers and employees are also authorized and directed to make such examinations at the ports of New York and Boston, provided the dog or cat is brought into the United States by a passenger. At all airports, Customs officers shall make the examination of dogs and cats, whether or not accompanied by the owners, if there is no inspector of the Department of Agriculture stationed there or on duty at the time of arrival.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 68-154, 33 FR 8730, June 14, 1968; T.D. 78-99, 43 FR 13060, Mar. 29, 1978; T.D. 87-75, 52 FR 20066, May 29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.71</SECTNO> <SUBJECT>Purebred animals; bond for production of evidence; deposit of estimated duties; stipulation.</SUBJECT> <P>(a) The animal may be released from Customs custody upon the furnishing by the importer of a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter for the production within 6 months of (1) a certificate of pure breeding issued by the Department of Agriculture, and (2) the declaration required by § 10.70(a) submitted in letter form if such declaration was not filed at the time of entry. The release of the animal from customs custody requires the presentation of the pedigree certificate and evidence of transfer of ownership in accordance with the regulations of the Department of Agriculture mentioned in § 10.70(b).</P> <P>(b) Charges against the bond shall be canceled only upon the production of the required evidence or on payment of duties.</P> <P>(c) In cases where the pedigree certificate and evidence of transfer of ownership have been presented in accordance with the regulations of the Department of Agriculture, the importer, if he so elects, may, in lieu of giving a bond, deposit estimated duties and file a stipulation with the port director within 10 days after the date of entry to produce the declaration and certificate of pure breeding within 6 months from the date of entry, whereupon the liquidation of the entry shall be suspended. (See § 113.42 of this chapter.)</P> <P>(d) If the pedigree certificate and evidence of transfer of ownership were not presented in accordance with such regulations of the Department of Agriculture, a deposit of estimated duties, in addition to the regular entry bond, shall be required.</P> <P>(e) When a passenger arriving in the United States with one or more dogs or cats and with the required certificates of pedigree and transfers of ownership in his possession furnishes a properly executed declaration as required by § 10.70(a) along with an application to the Department of Agriculture on ANH Form 17-338 for a certificate of pure breeding, the entry of the animal(s) as duty-free under subheading 0106.00.50, Harmonized Tariff Schedule of the <PRTPAGE P="133"/>United States (HTSUS), may be made on the passenger's baggage declaration if the value of the animals does not exceed $500. In such case the entry shall be supported by a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter for the production within 6 months of a certificate of pure breeding. The bond shall be without surety or cash deposit unless the port director on the basis of information before him finds that a bond with surety or a cash deposit is necessary to protect the revenue.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 68-79, 33 FR 4461, Mar. 13, 1968; T.D. 68-154, 33 FR 8731, June 14, 1968; T.D. 74-227, 39 FR 32015, Sept. 4, 1974; T.D. 78-99 43 FR 13060, Mar. 29, 1978; T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 87-75, 52 FR 26142, July 13, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988; T.D. 93-66, 58 FR 44130, Aug. 19, 1993]</CITA> </SECTION> <SECTION> <SECTNO>§§ 10.72-10.73</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 10.74</SECTNO> <SUBJECT>Animals straying across boundary for pasturage; offspring.</SUBJECT> <P>When domestic animals for which free entry is to be claimed under subheading 9801.00.90, Harmonized Tariff Schedule of the United States, have strayed across the boundary line, they may be returned, together with their offspring, without entry if brought back within 30 days; otherwise entry shall be required. The owner of any such animal shall report its return to the nearest Customs office and hold it for such inspection and treatment as may be deemed necessary by a representative of the Animal and Plant Health Inspection Service of the Department of Agriculture. Any such arrival found not to have been so reported or held shall be subject to seizure and forfeiture pursuant to 18 U.S.C. 545.</P> <CITA>[T.D. 87-75, 52 FR 20067, May 29, 1987, as amended by T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.75</SECTNO> <SUBJECT>Wild animals and birds; zoological collections.</SUBJECT> <P>When wild animals or birds are claimed to be free of duty under subheading 9810.00.70, Harmonized Tariff Schedule of the United States (HTSUS), (19 U.S.C. 1202), the port director may, at his discretion, require appropriate proof that the animals or birds were specially imported pursuant to negotiations conducted prior to importation for the delivery of animals or birds of a named species meeting agreed specifications of reasonable particularity and that they are intended at the time of importation for public exhibition in a collection maintained for scientific or educational purposes and not for sale or for use in connection with any enterprise conducted for profit. The fact that an animal or bird may have been sent on approval shall not preclude free entry under subheading 9810.00.70, HTSUS, when it is actually accepted as a part of the zoological collection and so exhibited.</P> <CITA>[T.D. 85-123, 50 FR 29953, July 23, 1985, as amended by T.D. 89-1, 53 FR 51250, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.76</SECTNO> <SUBJECT>Game animals and birds.</SUBJECT> <P>(a) The following classes of live game animals and birds may be admitted free of duty for stocking purposes under the provisions of subheading 9817.00.70 without reference to the United States Customs Service, if the requirements of the Fish and Wildlife Service, Department of the Interior, have been complied with.</P> <EXTRACT> <HD SOURCE="HD1">animals</HD> <P>1. Cervidae, commonly known as deer and elk.</P> <P>2. Leporidae, commonly known as rabbits.</P> <P>3. Sciuridae, commonly known as squirrels.</P> <HD SOURCE="HD1">birds</HD> <P>1. Anatidae, commonly known as ducks and geese.</P> <P>2. Gallinae, commonly known as turkeys, grouse, pheasants, partridges, and quail.</P> <P>3. Otididae, commonly known as bustards.</P> <P>4. Tinamidae, commonly known as tinamous.</P> </EXTRACT> <P>(b) Application for the free entry of other live animals or birds under subheading 9817.00.70, Harmonized Tariff Schedule of the United States shall be referred to the United States Customs Service for consideration. Animals imported for fur-farming purposes shall not be admitted free of duty under that paragraph.</P> <P>(c) [Reserved]</P> <P>(d) Game animals and birds killed in foreign countries by residents of the United States, if not imported for sale or other commercial purposes, may be <PRTPAGE P="134"/>admitted free of duty without entry, if the person has no merchandise requiring a written declaration upon the filing of a declaration on U.S. Fish and Wildlife Service Form 3-177, Declaration for Importation or Exportation of Fish or Wildlife. No bond or cash deposit to insure the destruction or exportation of the plumage of such birds shall be required.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 82-145, 47 FR 35475, Aug. 16, 1982; T.D. 86-118, 51 FR 22515, June 20, 1986; T.D. 89-1, 53 FR 51250, Dec. 21, 1988; T.D. 90-78, 55 FR 40166, Oct. 2, 1990]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.77</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SUBJGRP> <HD SOURCE="HED">Products of American Fisheries</HD> <SECTION> <SECTNO>§ 10.78</SECTNO> <SUBJECT>Entry.</SUBJECT> <P>(a) No entry shall be required for fish or other marine products taken on the high seas by vessels of the U.S. or by residents of the U.S. in undocumented vessels owned in the U.S. when such fish or other products are brought into port by the taking vessel or are transferred at sea to another fishing vessel of the same fleet and brought into port.</P> <P>(b) An American fishery, within the meaning of Subchapter XV of Chapter 98, Harmonized Tariff Schedule of the United States, is defined as a fishing enterprise conducted under the American flag by vessels of the United States on the high seas or in foreign waters in which such vessels have the right by treaty or otherwise, to take fish or other marine products and may include a shore station operated in conjunction with such vessels by the owner or master thereof.</P> <P>(c) The employment of citizens of a foreign country by an American fishery is permissible but the purchase by an American fishery of fish or other marine products taken by citizens of a foreign country on the high seas or in foreign waters will subject such fish or other marine products to treatment as foreign merchandise.</P> <P>(d) Products of an American fishery shall be entitled to free entry although prepared, preserved, or otherwise changed in condition, provided the work is done at sea by the master or crew of the fishery or by persons employed by and under the supervision of the master or owner of the fishery. Fish (except cod, haddock, hake, pollock, cusk, mackerel, and swordfish) the product of an American fishery landed in a foreign country and there not further advanced than beheaded, eviscerated, packed in ice, frozen and with fins removed, shall be entitled to free entry, whether or not such processing is done by the American fishery. Products of an American fishery prepared or preserved on the treaty coasts of Newfoundland, Magdalen Islands, or Labrador, as such coasts are defined in the Convention of 1818 between the United States and Great Britain, shall be entitled to free entry only if the preparation or preservation is done by an American fishery.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20067, May 29, 1987; T.D. 89-1, 53 FR 51250, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.79</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Salt For Curing Fish</HD> <SECTION> <SECTNO>§ 10.80</SECTNO> <SUBJECT>Remission of duty; withdrawal; bond.</SUBJECT> <P>Imported salt in bond may be used in curing fish taken by vessels licensed to engage in the fisheries, and in curing fish in the shores of the navigable waters of the U.S., whether such fish are taken by licensed or unlicensed vessels, and upon proof that the sale has been used for either of such purposes, the duties on the same shall be remitted. (Section 313(e), Tariff Act of 1930, 19 U.S.C. 1313(e)). Imported salt entered for warehouse may be withdrawn under bond for use in curing fish. Upon proof that the salt has been so used, the duties thereon shall be remitted. In no case shall the quantity of salt withdrawn exceed the reasonable requirements of the case. Withdrawal shall be made on Customs Form 7501. Each withdrawal shall contain the statement prescribed for withdrawals in § 144.32 of this chapter. When the withdrawal is made by a person other than the importer of record, a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter for the production of proof of <PRTPAGE P="135"/>proper use shall be filed. Upon acceptance of the bond, a withdrawal permit shall be issued on Customs Form 7501.</P> <CITA>[T.D. 89-1, 53 FR 51251, Dec. 21, 1988, as amended by T.D 95-81, 60 FR 52295, Oct. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.81</SECTNO> <SUBJECT>Use in any port.</SUBJECT> <P>(a) Salt withdrawn under bond for use in curing fish on the shores of navigable waters may be used for such purpose at any port, but the evidence of use in such cases shall be submitted through the director of the port where the salt was used.</P> <P>(b) If desired, salt to be used in curing fish on shore at another port than that in which it is warehoused in bond may be withdrawn under a transportation entry and shipped in bond to the other port at which it is to be used, where it may be entered on Customs Form 7501 which shall show withdrawal of the salt for use in curing fish. Thereupon, and upon the filing of a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter, such salt may be used without being sent to a bonded warehouse or public store. In such a case the proof of use shall be filed at the latter port.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 87-75, 52 FR 20067, May 29, 1987; T.D 95-81, 60 FR 52295, Oct. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.82</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 10.83</SECTNO> <SUBJECT>Bond; cancellation; extension.</SUBJECT> <P>(a) If it shall appear to the satisfaction of the port director holding the bond referred to in § 10.80, that the entire quantity of salt covered by the bond has been duly accounted for, either by having been used in curing fish or by the payment of duty, the port director may cancel the charges against the bond. The port director may require additional evidence in corroboration of the proof of use produced.</P> <P>(b) On application of the person making the withdrawal, the period of the bond may be extended 1 year so as to allow the salt to be used during the time of extension in curing fish with the same privileges as if used during the original period.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 87-75, 52 FR 20067, May 29, 1987]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Automotive Products</HD> <SECTION> <SECTNO>§ 10.84</SECTNO> <SUBJECT>Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles.</SUBJECT> <P>(a)(1) Certain motor vehicles and motor vehicle equipment are eligible for duty-free entry as proclaimed by the President under the Automotive Products Trade Act of 1965. The articles designated for such duty-free treatment are defined in General Note 3(c)(iii), HTSUS (19 U.S.C. 1202). Specifically, such articles are those designated [as “Free (B)”] in the “Special” subcolumn in Chapter 87, HTSUS, and must qualify as “Canadian articles” as defined in General Note 3(c)(iii)(A)(1), HTSUS. To claim exemption from duty under the Automotive Products Trade Act of 1965, an importer must establish, to the satisfaction of the appropriate Customs officer, that the article in question qualifies as a “Canadian article” for purposes of General Note 3(c)(iii)A)(1), HTSUS. The Customs officer may accept as satisfactory evidence a certificate executed by the exporter as set forth in paragraph (b) of this section, subject to any verification he may deem necessary. Alternatively, the Customs officer may determine that under the circumstances of the importation a certificate is unnecessary.</P> <P>(2) Under the United States-Canada Free-Trade Agreement and implementing legislation (Pub. L. 100-449, 102 Stat. 1851) a manufacturer of motor vehicles may elect to average, over its 12-month financial year, its calculation of the value-content requirement for vehicles in establishing its eligibility for tariff preference. Requirements for averaging are set forth in § 10.310 and 10.311.</P> <P>(b)(1) When all materials used at any stage in the production of the imported article are wholly obtained or produced in Canada or the United States, or both, a certificate in the following form may be accepted as evidence that the commodity is a “Canadian article”: </P> <EXTRACT> <P>All materials contained in the product covered by the _____ (Describe the invoice, bill of lading, or other document or statement identifying the shipment) annexed or <PRTPAGE P="136"/>appended to this certificate of Canadian origin at the time it was subscribed were wholly obtained or produced in Canada or the United States, or both. No materials other than those which were wholly obtained or produced in Canada or the United States, or both, were incorporated into this product or any of its components at any stage of production or in the production of any intermediate product used at any stage in the chain of production in Canada or the United States, or both.</P> </EXTRACT> <P>(2) When any material used at any stage in the production of an imported article or any of its components is not wholly obtained or produced in Canada or the United States, or both, a certificate in the following form may be accepted as evidence that the commodity is nevertheless a “Canadian article”: </P> <EXTRACT> <P>The product covered by the _____ (Describe the invoice, bill of lading, or other document or statement identifying the shipment) annexed or appended to this certificate of Canadian origin at the time it was subscribed is an originating good so as to be a Canadian article. There were used in its production in Canada _____ (Description sufficient for tariff classification of the materials, and number of units) of third country materials of which the price paid was _____ per unit of quantity, plus _____ which represents all costs incurred in transporting the materials to the location of the producer and the duties, taxes, and brokerage fees on the materials, if such costs were not included in the price paid.</P> </EXTRACT> <P>(3) If such Customs officer is satisfied that the revenue will be protected adequately thereby, he may accept in lieu of the certificate specified in paragraph (b)(2) of this section a certificate in the following form when the merchandise covered thereby has been produced with third country material but is an originating good under a specific rule of origin for the merchandise: </P> <EXTRACT> <P>The product covered by the _____ (Describe the invoice, bill of lading, or other document or statement identifying the shipment) annexed or appended to this certificate of Canadian origin at the time it was subscribed is an originating good so as to be a Canadian article. There were or may have been used in its production in Canada or the United States, or both, materials of a third country.</P> <P>It is impractical to ascertain the exact number of units of third country material, if any, used in its production or the price paid (and other costs required to be included in the price paid) of such materials but to the best of (my) (our) (its) knowledge the materials are described (sufficient for tariff classification purposes) as follows: _____.</P> </EXTRACT> <P>(4) The certificates described in paragraphs (b)(2) and (b)(3) of this section shall not be accepted if the statements therein make it evident that the importation is not a “Canadian article” within the meaning of General Note 3(c), HTSUS.</P> <P>(5) If more than one kind of article is covered by a certificate provided for in paragraph (b) (1), (2), or (3) of this section, the information required by the certificate shall be shown with respect to each kind. When more than one kind of material, other than originating material, is used in the production of an article covered by such a certificate, the certificate shall state the number of units, a description sufficient for tariff classification purposes, the price paid, and, if not included in the price paid, the costs incurred in transporting the materials to the location of the producer and duties, taxes and brokerage fees paid in Canada and/or the United States on the material, per unit of each kind of materials.</P> <P>(6) A certificate conforming to paragraph (b) (1), (2), or (3) of this section shall be accepted as evidence of the facts alleged therein only if:</P> <P>(i) There is annexed thereto a copy of the commercial invoice or bill of lading covering the articles or other documentary evidence which identifies the article to which the certificate pertains,</P> <P>(ii) The certificate is signed by the manufacturer or producer of the article to which it pertains, or by the person who exported the articles from Canada, and</P> <P>(iii) It clearly appears that such copy or other documentary evidence was annexed to the certificate when it was signed.</P> <P>(c) In lieu of the certification in paragraph (b) (1), (2), or (3) of this section, a manufacturer of motor vehicles who claims a preference under the United States-Canada Free-Trade Agreement and elects to average pursuant to § 10.310(a), shall be subject to the requirements of §§ 10.301 to 10.311 of this part.</P> <P>(d) When an importer makes an entry, or withdrawal from warehouse, for consumption of articles for use as <PRTPAGE P="137"/>“original motor-vehicle equipment” as that term is defined in General Note 3(c)(iii), HTSUS, he shall file in connection therewith his declaration that the articles are being imported for use as original equipment in the manufacture in the United States of the kinds of motor vehicles specified in the General Note and furnish the name and address of the motor vehicle manufacturer. A copy of the written order, contract, or letter of intent shall be attached to the importer's declaration except that if the port director is satisfied that a copy of the written order, contract, or letter of intent will be made available by the importer or ultimate consignee for inspection by customs officials upon request during a period of 3 years from the date of such entry or withdrawal from warehouse, the production of such documents will not be required. Proof of use need not be furnished.</P> <P>(e) If, after a Canadian article has been accorded the status of original motor-vehicle equipment, it is decided to divert the article from its intended use in the manufacture in the United States of motor vehicles, the importer or other person deciding to divert the article from such intended use shall give notice in writing of the decision to the director of the port where entry was made or where the offices of the importer are located and either make arrangements for its destruction or exportation under Customs supervision or pay duties in accordance with General Note 3(c)(iii)(B)(2), HTSUS. If such article is not destroyed or exported under Customs supervision or the duties paid, the article, or its value, shall be subject to forfeiture.</P> <CITA>[T.D. 89-3, 53 FR 51765, Dec. 23, 1988, as amended by T.D. 92-8, 57 FR 2453, Jan. 22, 1992; T.D. 93-66, 58 FR 44130, Aug. 19, 1993]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Master Records, And Metal Matrices</HD> <SECTION> <SECTNO>§ 10.90</SECTNO> <SUBJECT>Master records and metal matrices.</SUBJECT> <P>(a) Consumption entries covering importations under subheading 8524.99.20, HTSUS, shall be filed at a port in the Customs district in which the factory where the articles will be used is located.</P> <P>(b) The invoice filed with the entry shall contain or be supported by a detailed statement of the cost of production, in the country where made, of each master record or metal matrix covered thereby.</P> <P>(c) A bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter shall be filed for importations under this section.</P> <P>(d) Entries already filed and future entries shall be liquidated in due course without the assessment of duty, but liability on bonds given with the entries shall be discontinued with respect to any article covered thereby only upon payment of liquidated damages in an amount equal to the duties which would have accrued had the master records or metal matrices been imported for use otherwise than in the manufacture of sound records for export purposes, or upon satisfactory proof that the master records or metal matrices obtained therefrom have been exported or destroyed under Customs supervision, and that all sound records made with the use of such articles have been exported.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 84-213, 49 FR 41166, Oct. 19, 1984; T.D. 87-75, 52 FR 20067, May 29, 1987; T.D. 89-1, 53 FR 51251, Dec. 21, 1988; T.D. 90-78, 55 FR 40166, Oct. 2, 1990; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Prototypes</HD> <SECTION> <SECTNO>§ 10.91</SECTNO> <SUBJECT>Prototypes used exclusively for product development and testing.</SUBJECT> <P>(a) <E T="03">Duty-free entry; declaration of use; extension of liquidation</E>—(1) <E T="03">Entry or withdrawal for consumption.</E> Articles defined as “prototypes” and meeting the other requirements prescribed in paragraph (b) of this section may be entered or withdrawn from warehouse for consumption, duty-free, under subheading 9817.85.01, Harmonized Tariff Schedule of the United States (HTSUS), on CBP Form 7501 or an electronic equivalent. A separate entry or withdrawal must be made for a qualifying prototype article each time the article is imported/reimported to the United States.</P> <P>(2) <E T="03">Importer declaration.</E> (i) <E T="03">Entry accepted as declaration.</E> Entry or withdrawal from warehouse for consumption under HTSUS subheading 9817.85.01 <PRTPAGE P="138"/>may be accepted by the port director as an effective declaration that the articles will be used solely for the purposes stated in the subheading.</P> <P>(ii) <E T="03">Proof (declaration) of actual use.</E> If it is believed the circumstances so warrant, the port director may request the submission of proof of actual use, executed and dated by the importer. The title of the party executing the proof of actual use must be set forth. If proof of actual use is requested, the importer must provide it within three years after the date the article is entered or withdrawn from warehouse for consumption. Liquidation of the related entry may be extended until the requested proof or declaration of actual use is received or until the three-year period from the date of entry allowed for the receipt of such proof has expired. While requested proof of use must be given to CBP within three years of the date of entry, the prototype may continue to be used thereafter for the purposes enumerated in HTSUS subheading 9817.85.01. If requested proof of use is not timely received, the entry will be liquidated as dutiable under the tariff provision that would otherwise apply to the imported article. While there is no particular form for this declaration, it may either be submitted in writing, or electronically as authorized by CBP, and must include the following:</P> <P>(A) A description of the use that is being and/or that has been made of the articles set forth in sufficient detail so as to enable the port director to determine whether the articles have been entitled to entry as claimed;</P> <P>(B) A statement that the articles have not and are not to be put to any other use after the articles have been entered or withdrawn from warehouse for consumption and prior to the completion of their use under HTSUS 9817.85.01 (also see paragraphs (c) and (d) of this section concerning the disposition(s) to which the articles may be put following their use under HTSUS subheading 9817.85.01); and</P> <P>(C) A statement that the articles or any parts of the articles have not been and are not intended to be sold, or incorporated into other products that are sold, after the articles have been entered or withdrawn from warehouse for consumption and prior to the completion of their use as provided in HTSUS subheading 9817.85.01 ( <E T="03">see</E> paragraph (b)(2)(ii) of this section).</P> <P>(b) <E T="03">Articles classifiable as prototypes</E>— (1) <E T="03">Prototypes defined.</E> In accordance with U.S. Note 6(a) to subchapter XVII of chapter 98, HTSUS, applicable to subheading 9817.85.01, the term “prototypes” means originals or models of articles pertaining to any industry that:</P> <P>(i) Are either in the preproduction, production or postproduction stage and are to be used exclusively for development, testing, product evaluation, or quality control purposes (not including automobile racing for purse, prize or commercial competition); and</P> <P>(ii) In the case of originals or models of articles that are either in the production or postproduction stage, are associated with a design change from current production (including a refinement, advancement, improvement, development or quality control in either the product itself or the means of producing the product).</P> <P>(2) <E T="03">Additional requirements.</E> In accordance with U.S. Note 6(b) and (c) to subchapter XVII of chapter 98, HTSUS, applicable to subheading 9817.85.01, the following additional restrictions apply to articles that may be classified as prototypes:</P> <P>(i) <E T="03">Importations limited.</E> Prototypes may be imported pursuant to this section only in limited noncommercial quantities in accordance with industry practice.</P> <P>(ii) <E T="03">Sale prohibited after entry and prior to use.</E> Prototypes or parts of prototypes may not be sold, or be incorporated into other products that are sold into the commerce of the United States, after the prototypes have been entered or withdrawn from warehouse for consumption under HTSUS subheading 9817.85.01, except that, after having been used for the purposes for which they were entered or withdrawn from warehouse under HTSUS subheading 9817.85.01, such prototypes or any part(s) of the prototypes may be sold as scrap, waste, or for recycling, as prescribed in paragraph (c) of this section.</P> <P>(iii) <E T="03">Articles subject to laws of another agency.</E> Articles that are subject to licensing requirements, or that must <PRTPAGE P="139"/>comply with laws, rules or regulations administered by an agency other than CBP before being imported, may be entered as prototypes pursuant to this section if they meet all applicable provisions of law and otherwise meet the definition of prototypes in paragraph (b)(1) of this section.</P> <P>(iv) <E T="03">Articles excluded from being prototypes.</E> Articles that are in fact subject at the time of entry to quantitative restrictions, antidumping orders or countervailing duty orders are excluded from being classified as prototypes under this section.</P> <P>(c) <E T="03">Sale of prototype following use.</E> (1) <E T="03">Sale.</E> Prototypes or any part(s) of prototypes, after having been used for the purposes for which they were entered or withdrawn under HTSUS subheading 9817.85.01, may only be sold as scrap, waste, or for recycling. This includes a prototype or any part thereof that is incorporated into another product, as scrap, waste, or recycled material. If sold as scrap, waste, or for recycling, applicable duty must be paid on the prototypes or parts as provided in paragraph (c)(3) of this section, at the rate of duty in effect for such scrap, waste, or recycled materials at the time the prototypes were entered or withdrawn for consumption.</P> <P>(2) <E T="03">Notice of sale required.</E> If, after a prototype has been used for the purposes contemplated in HTSUS subheading 9817.85.01, the prototype or any part(s) of the prototype (including a prototype or any part that is incorporated into another product) is sold as scrap, waste, or for recycling, the importer must provide notice of such sale to the port director where the entry or withdrawal of the prototype was made. A notice, in the manner authorized in paragraph (c)(3) of this section, must be submitted in connection with the sale, whether or not duty is payable. The notice should not be submitted prior to the submission of proof of actual use, should such proof of actual use be requested by the port director ( <E T="03">see</E> paragraph (a)(2)(ii) of this section).</P> <P>(3) <E T="03">Form and content of notice; tender of duty.</E> While no particular form is required for the notice of sale, a consumption entry (CBP Form 7501), appropriately modified, or an electronic equivalent as authorized by CBP, may be used for this purpose. The notice may be a blanket notice covering all those sales described in paragraph (c)(2) of this section that occur over a quarterly (3-month) calendar period. Such notice must be filed within 10 business days of the end of the related quarterly period in which the sale(s) occurred. If an article sold is dutiable, the payment of any duty due must be forwarded together with the notice (<E T="03">see</E> paragraph (c)(1) of this section). If the notice is filed electronically, payment of any duty owed will be handled through the Automated Clearinghouse ( <E T="03">see</E> § 24.25 of this chapter). The notice of sale must be executed by the importer, or other person having knowledge of the facts surrounding the sale, and must include the following:</P> <P>(i) The identity of the prototype; the consumption entry number under which it was imported; a copy of the declaration of actual use, if proof of actual use was requested under paragraph (a)(2)(ii) of this section; and a detailed description of the condition of the prototype following use for the intended permissible purposes, including any damage, degradation or deterioration to the article resulting from such use and/or otherwise resulting to the article from any other cause prior to its sale for scrap, waste, or recycling;</P> <P>(ii) The name and address of the party to whom the article was sold, and (if known) the use to which the party intends to put the article;</P> <P>(iii) The HTSUS subheading number for scrap, waste, or recycled material, as applicable, claimed in connection with the sale of the prototype, together with the corresponding rate of duty in effect at the time the prototype was originally imported for consumption;</P> <P>(iv) The value of the prototype article (if dutiable and the duty owed is based upon value) ( <E T="03">see</E> paragraph (e)(2) of this section); and</P> <P>(v) The title of the party executing the declaration and the date of execution.</P> <P>(d) <E T="03">Prototypes not sold following use.</E> As to those prototypes or parts of prototypes that, after having been used as prescribed under HTSUS subheading 9817.85.01, are disposed of otherwise than by sale ( <E T="03">see</E> paragraph (c)(1) of this section), there is no requirement <PRTPAGE P="140"/>that the importer notify CBP of any such alternative disposition. Nor are there any dutiable consequences that ensue from any disposition of the merchandise after the merchandise's use under HTSUS subheading 9817.85.01 other than sale to the extent authorized under paragraph (c)(1) of this section.</P> <P>(e) <E T="03">Recordkeeping; retention and production</E>—(1) <E T="03">Recordkeeping.</E> The importer must be prepared to submit to the CBP officer, if requested, any information, including any supporting documents, reports and records, as was necessary for the preparation of the declaration of use, if the declaration of use was requested under paragraph (a)(2)(ii) of this section, and the notice of sale, if applicable under paragraph (c)(3) of this section. The notices, together with any related supporting evidence, may be subject to such verification as the port director reasonably deems necessary. Supporting documentary evidence must be made available to the CBP officer, upon request, for a period of five years (<E T="03">see</E> § 163.4(a) of this chapter) from the date of filing in complete and proper form, the declaration of use, if requested, and, if applicable, the notice of sale. The supporting records must be made available to the CBP officer upon request in accordance with § 163.6 of this chapter.</P> <P>(i) Documents supporting the proof (declaration) of actual use must:</P> <P>(A) Establish that the identity and description of the prototype article is the same article that the consumption entry was made for under subheading 9817.85.01, HTSUS; and</P> <P>(B) Describe the circumstances of the use of the article; the operations, testing, review, manipulation, experimentation, and/or other exercises that are being and/or that have been conducted in connection with the prototype; and the location, such as the plant or production facility, where these activities occurred, sufficient to demonstrate that the purposes enumerated in HTSUS subheading 9817.85.01 are taking and/or have actually taken place.</P> <P>(ii) Documents supporting the notice of sale must establish that:</P> <P>(A) The identity of the prototype sold is the same article for which a consumption entry was made under subheading 9817.85.01 HTSUS when it was imported, and that the article was in the condition described in the notice of sale;</P> <P>(B) The article was sold to the party identified in the notice of sale;</P> <P>(C) The HTSUS subheading number for scrap, waste, or recycled material, as applicable, claimed in connection with the sale of the prototype is accurate;</P> <P>(D) The date that the prototype was originally imported for consumption, and the corresponding rate of duty in effect at the time for the applicable HTSUS subheading; and</P> <P>(E) The value of the prototype article (if dutiable and the duty owed is based upon value) ( <E T="03">see</E> paragraph (e)(2) of this section) as claimed in the notice of sale is accurate.</P> <P>(2) <E T="03">Relevant value for used prototype or parts sold.</E> For purposes of this section, with respect to any duty owed on prototypes or parts of prototypes that are sold as scrap, or waste, or for recycling, where the duty owed is based upon value, the relevant value is the market value of the prototypes or parts, based upon their character and condition following use for the purposes prescribed in HTSUS subheading 9817.85.01. The relevant value should take into consideration any damage, degradation or deterioration to the prototypes or parts resulting from their use as a prototype and/or otherwise resulting to the articles from any other cause prior to their sale as scrap, waste, or for recycling. The market value will generally be measured by the selling price. Should a prototype or part of a prototype become a component of another product that is sold as scrap, waste, or recycled material, the relevant market value would be that portion of the selling price attributable to the component (prototype or part) as provided in this paragraph.</P> <P>(f) <E T="03">Articles admitted under TIB</E>—(1) <E T="03">Duty-free entry available.</E> Under the procedure presented in paragraph (f)(2) of this section, an entry of an article made under a temporary importation bond (TIB) solely for testing, experimental or review purposes under HTSUS subheading 9813.00.30 may be converted into a duty-free entry under <PRTPAGE P="141"/>HTSUS subheading 9817.85.01, if the following conditions exist:</P> <P>(i) The article meets the definition for “prototypes” in paragraph (b) of this section (U.S. Note 6(a) to subchapter XVII, chapter 98, HTSUS); and</P> <P>(ii) The TIB entry for the article was in effect and had not been closed, and the TIB period for the article had not expired, as of November 9, 2000.</P> <P>(2) <E T="03">Procedure for converting TIB entry to duty-free entry</E>—(i) <E T="03">Importer request.</E> The importer must submit a written request, or an electronic equivalent as authorized by CBP, that a TIB entry made under HTSUS subheading 9813.00.30, which was in effect and had not been closed, and for which the TIB period had not expired, as of November 9, 2000, be converted instead into a duty-free consumption entry under HTSUS subheading 9817.85.01.</P> <P>(ii) <E T="03">Action by CBP.</E> CBP will convert the TIB entry under HTSUS subheading 9813.00.30 to a duty-free entry under HTSUS subheading 9817.85.01, provided that the port director is satisfied that the conditions set forth in paragraphs (f)(1)(i) and (f)(1)(ii) of this section have been met. When the TIB entry is converted, the bond will be cancelled and the entry closed. Once the conversion is complete, the port director will provide a courtesy acknowledgment to this effect to the importer in writing or electronically.</P> <CITA>[CBP Dec. 04-36, 69 FR 63449, Nov. 2, 2004]</CITA> </SECTION> <SECTION> <SECTNO>§§ 10.92-10.97</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Fluxing Material</HD> <SECTION> <SECTNO>§ 10.98</SECTNO> <SUBJECT>Copper-bearing fluxing material.</SUBJECT> <P>(a) For the purpose of this section, ores usable as a flux or sulphur reagent, mentioned in the provision for such ores in subheading 2603.00.00, Harmonized Tariff Schedule of the United States, shall include only ores which contain by weight not over 15 percent copper.</P> <P>(b) [Reserved]</P> <P>(c) There shall be filed in connection with the entry of such copper-bearing ores, either for consumption or warehouse, a declaration of the importer that the material is to be used for fluxing purposes only. In the case of a consumption entry, the estimated tax shall be deposited at the time of entry. Liquidation of entries shall be suspended pending proof of use for fluxing purposes as hereinafter provided.</P> <P>(d) Samples of the material shall be taken in accordance with the commercial method in effect at the plant if to be used in a bonded smelting warehouse, or in accordance with §§ 151.52 through 151.55 of this chapter if entered for consumption, and the copper content thereof shall be determined by the Government chemist in accordance with the assay.</P> <P>(e) The management of the smelting or converting plant shall file with the appropriate Customs officer at the port or ports where the entries are to be liquidated, a statement based on its records of operation for each quarterly period showing for each furnace or converter the total quantity of material charged during each month or part thereof of each quarter, the total quantity of material used for fluxing purposes, and the quantity of imported ores used for fluxing purposes for which free entry was claimed under the above-mentioned provision, together with the copper content of such imported ores computed in accordance with the Government assay. If the quantity of ores used for fluxing purposes in any furnace or converter during any month or part thereof of any quarter is in excess of 25 percent of the charge of such furnace or converter, the quarterly statement shall be accompanied by an explanation of the necessity for using such quantity for fluxing purposes.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 73-175, 38 FR 17445, July 2, 1973; T.D. 87-75, 52 FR 20067, May 29, 1987; T.D. 89-1, 53 FR 51251, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Ethyl Alcohol</HD> <SECTION> <SECTNO>§ 10.99</SECTNO> <SUBJECT>Importation of ethyl alcohol for nonbeverage purposes.</SUBJECT> <P>(a) If claim is made by an importer other than the United States or a governmental agency thereof for the classification of ethyl alcohol of an alcoholic strength by volume of 80 percent volume or higher under subheading 2207.10.60, Harmonized Tariff Schedules of the United States, the importer or <PRTPAGE P="142"/>his agent shall file in connection with the entry a declaration that the alcohol is to be used for nonbeverage purposes only and whether the alcohol is to be used for fuel purposes. Customs shall release the alcohol for transfer, under internal revenue bond, to a distilled spirits plant upon deposit of estimated duty, if any, and without the payment of the internal revenue tax upon receipt of a transfer record for bulk spirits. In addition, a package gauge record must be submitted to Customs if the alcohol is in packages, as specified in subpart I of part 251, Bureau of Alcohol, Tobacco and Firearms (BATF) Regulations (27 CFR part 251, subpart I). The transfer shall be accomplished in accordance with subpart L of Part 251, Bureau of Alcohol, Tobacco and Firearms Regulations (27 CFR part 251, subpart L).</P> <P>(b) An appropriate BATF permit shall be filed with Customs in connection with the withdrawal of ethyl alcohol from Customs custody by the United States or any governmental agency thereof for its own use for nonbeverage purposes. Such permit shall be filed before release under the entry without the deposit of estimated duties, if any, and internal revenue tax, or before release in accordance with the provisions of § 141.102(d) of this chapter. (See subpart M of part 251, Bureau of Alcohol, Tobacco and Firearms Regulations (27 CFR part 251, subpart M)).</P> <P>(c) The procedures for the withdrawal free of tax on the entry of ethyl alcohol for nonbeverage purposes from the Virgin Islands are found in subpart O of part 250, Bureau of Alcohol, Tobacco and Firearms Regulations (27 CFR part 250, subpart O).</P> <CITA>[T.D. 89-65, 54 FR 28413, July 6, 1989]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">United States Government Importations</HD> <SECTION> <SECTNO>§ 10.100</SECTNO> <SUBJECT>Entry, examination, and tariff status.</SUBJECT> <P>Except as otherwise provided for in §§ 10.101, 10.102, 10.104, 141.83(d)(8), 141.102(d), or elsewhere in this chapter, importations made by or for the account of any agency or office of the United States Government are subject to the usual Customs entry and examination requirements. In the absence of express exemptions from duty, such as are contained in subheadings 9808.00.10, 9808.00.20, 9808.00.30, 9808.00.40, 9808.00.50, 9808.00.60, 9808.00.70, or other subheadings in the Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) providing for free entry, such importations are also subject to duty.</P> <CITA>[T.D. 77-23, 42 FR 2310, Jan. 11, 1977, as amended by T.D. 89-1, 53 FR 51251, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.101</SECTNO> <SUBJECT>Immediate delivery.</SUBJECT> <P>(a) <E T="03">Shipments entitled to immediate delivery.</E> Shipments consigned to or for the account of any agency or office of the United States Government, or to an officer or official of any such agency in his official capacity, shall be regarded for purposes of these regulations as shipments the immediate delivery of which is necessary within the purview of section 448(b), Tariff Act of 1930, as amended (19 U.S.C. 1448(b)).</P> <P>(b) <E T="03">Immediate delivery applications.</E> The shipments described in the preceding paragraph may be released upon the filing of immediate delivery applications on Customs Form 3461 as set forth in subpart A of part 142 of this chapter. Such applications may be limited to particular shipments or may cover all shipments imported by the Government agency making the application. They may be approved for specific periods of time or for indefinite periods of time, provided in either case they are supported by carrier's certificates and stipulations as provided for in paragraph (c) of this section.</P> <P>(c) <E T="03">Carrier's certificates and stipulations.</E> Before the release of a shipment under an immediate delivery permit, evidence of the right of the applicant to make entry for the articles shall be furnished the port director in accordance with the provisions of §§ 141.11 and 141.12 of this chapter.</P> <P>(d) <E T="03">Bond.</E> No bond shall be required in support of an immediate delivery application provided for in this section if a stipulation in the form as set forth below is filed with the port director in connection with the application: </P> <EXTRACT> <P SOURCE="P-DASH">I, ____, ____ (Title), a duly authorized representative of the</P> <FP SOURCE="FP-DASH"> <PRTPAGE P="143"/> </FP> <FP>(Name of United States Government department or agency) stipulate and agree on behalf of such department or agency that all applicable provisions of the Tariff Act of 1930, as amended, and the regulations thereunder, and all other laws and regulations, relating to the release and entry of merchandise will be observed and complied with in all respects.</FP> <HALFDASH/> <FP SOURCE="FRP">(Signature)</FP> </EXTRACT> <P>(e) <E T="03">Timely entries required.</E> If proper entries for consumption for importations released under these regulations are not filed within a reasonable time, appropriate steps shall be taken to insure the prompt filing of such entries.</P> <CITA>[T.D. 77-23, 42 FR 2310, Jan. 11, 1977, as amended by T.D. 87-75, 52 FR 20067, May 29, 1987]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.102</SECTNO> <SUBJECT>Duty-free entries.</SUBJECT> <P>(a) <E T="03">Invoice or declaration.</E> No invoice or other declaration of the shipper shall be required for shipments expressly exempt from duty as provided in subheadings 9808.00.10, 9808.00.20, 9808.00.30, 9808.00.40, 9808.00.50, 9808.00.60, 9808.00.70, or other subheadings in the Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202) providing for free entry. However, the importing Government agency or office shall present any invoice, memorandum invoice, or bill pertaining to the merchandise in its possession or available to it, or, if no such invoice or bill is available, a pro forma invoice prepared in accordance with § 141.85 of this chapter, setting forth adequate information for examination and determination of the dutiable status of the merchandise. In addition, the port director shall only admit articles free of duty under subheadings 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), upon the receipt of a certificate executed in the manner and form described in paragraph (b) of this section.</P> <P>(b) <E T="03">Certification.</E> One of the following certificates executed by a duly authorized officer or official of the appropriate Government agency or office is required for free entry of articles under subheadings 9808.00.30, 9808.00.40, or 9808.00.50, HTSUS (19 U.S.C. 1202). The certificates may be printed, stamped, or typewritten on the Customs entry or withdrawal form, Customs Form 7501, or on a separate paper attached to the entry or withdrawal form filed by the Government agency or office, provided the certification is clearly and unmistakably identified with the articles covered by the entry or withdrawal.</P> <P>(1) <E T="03">Articles for military departments, subheading 9808.00.30, HTSUS.</E> I certify that the procurement of this material constituted an emergency purchase of war material abroad by the Department of the (name of military department), and it is accordingly requested that such material be admitted free of duty pursuant to subheading 9808.00.30, HTSUS. </P> <EXTRACT> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Name)</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-1">(Title), who has been designated to execute free-entry certificates for the above-named department.</FP> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Grade or Rank)(Organization)</P> </EXTRACT> <P>(2) <E T="03">Articles for the Defense Logistics Agency, subheading 9808.00.40, HTSUS.</E> Pursuant to subheading 9808.00.40, HTSUS, I hereby certify that the above-described materials are strategic and critical materials procured under the Strategic and Critical Materials Stock Piling Act (50 U.S.C. 98e). </P> <EXTRACT> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Name)</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-1">(Title), Defense Logistics Agency, who has been duly authorized to execute the above certificate.</FP> </EXTRACT> <P>(3) <E T="03">Articles for the Department of Energy, subheading 9808.00.50, HTSUS.</E> I certify to the Secretary of the Treasury that the above-described materials are source materials purchased abroad, the admittance of which is necessary in the interest of the common defense and security, in accordance with subheading 9808.00.50, HTSUS. </P> <EXTRACT> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Name)</P> <FP SOURCE="FP-DASH"/> <FP SOURCE="FP-1">(Title), who has been authorized to execute free-entry certificates for the Department of Energy.</FP> </EXTRACT> <P>(c) <E T="03">Release of shipments.</E> Shipments for which free entry has been or will be claimed under subheading 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), shall be released after only such examination as is necessary to identify them.<PRTPAGE P="144"/> </P> <P>(d) <E T="03">Entry in Government name.</E> All materials for which free entry is claimed under subheading 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), shall be entered, or withdrawn from warehouse, for consumption in the name of the Government department whose representative executes the certificate set forth in § 10.102(b) unless exemption from this requirement is specifically authorized by the port director.</P> <CITA>[T.D. 77-23, 42 FR 2311, Jan. 11, 1977, as amended by T.D. 85-123, 50 FR 29953, July 23, 1985; T.D. 89-1, 53 FR 51251, Dec. 21, 1988; T.D. 93-44, 58 FR 34523, June 28, 1993; T.D 95-81, 60 FR 52295, Oct. 6, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.103</SECTNO> <SUBJECT>American goods returned.</SUBJECT> <P>(a) <E T="03">Certificate required.</E> Articles entered, or withdrawn from warehouse, for consumption in the name of an agency or office of the United States Government (with the exception of military scrap belonging to the Department of Defense) may be admitted free of duty under subheading 9801.00.10, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), upon the filing of a certificate on the letterhead of the agency or office in the following form in lieu of other entry documentation: </P> <EXTRACT> <P>I hereby certify:</P> <P>1. That the following articles imported in the ____________ (Name of Carrier) at the port of ____________ (Port) on ______ (Date) consist of returned products which are the growth, produce, or manufacture of the United States, and have been returned to the United States without having been advanced in value or improved in condition by any process of manufacture or other means, and that no drawback has been or will be claimed on such articles, and that the articles currently belonging to and are for the further use of ____________ (Agency or Office)</P> <GPOTABLE CDEF="xsl40,xsl40,r60" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">Number of containers</CHED> <CHED H="1">Bill of lading No.<SU>1</SU> </CHED> <CHED H="1">General description of articles</CHED> </BOXHD> <ROW> <ENT I="01"/> </ROW> <ROW> <ENT I="01"/> </ROW> <ROW> <ENT I="01"/> </ROW> <TNOTE> <SU>1</SU> If shipment arrives in the United States on a commercial carrier.</TNOTE> </GPOTABLE> <P>2. That the shipment does not contain military scrap.</P> <P>3. That the shipment is entitled to entry under subheading 9801.00.10, Harmonized Tariff Schedule of the United States (HTSUS) free of duty.</P> <P>4. That I am a military installation transportation officer having knowledge of the facts involved in this certificate.</P> <P SOURCE="P2">or</P> <P>I am an officer or official authorized by ________ (Agency or Office) (Whichever is applicable) to execute this certificate.</P> <FP SOURCE="FP-DASH"/> <P SOURCE="P2">(Name)</P> <FP SOURCE="FP-DASH"/> <HD SOURCE="HD3">(Rank and branch of service or Agency or Office)</HD> </EXTRACT> <P>(b) <E T="03">Combined certificate when articles are intermingled.</E> When articles claimed to be free under subheading 9801.00.10 and other articles claimed to be free under subheadings 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), are intermingled in a single shipment in a manner which precludes separation for the purpose of making claims for free entry under the separate categories, all the articles may be covered by a combined certificate which follows the requirements of § 10.102(b) and paragraph (a) of this section.</P> <P>(c) <E T="03">Execution of certificate.</E> The certificate required by paragraph (a) of this section may be executed by any military installation transportation officer having knowledge of the facts or by any other officer or official specifically designated or authorized to execute such certificates by the importing Government agency or office. If the merchandise arrived on a commercial carrier, the entry shall be supported by evidence of the right to make it.</P> <CITA>[T.D. 77-23, 42 FR 2311, Jan. 11, 1977, as amended by T.D. 89-1, 53 FR 51251, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.104</SECTNO> <SUBJECT>Temporary importation entries for United States Government agencies.</SUBJECT> <P>The entry of articles brought into the United States temporarily by an agency or office of the United States Government and claimed to be exempt from duty under Chapter 98, Subchapter XIII, Heading 9813, Harmonized Tariff Schedule of the United States (HTSUS), shall be made on Customs Form 7501. No bond shall be required if the agency or office files a stipulation in the form set forth in § 141.102(d) of this chapter. In those cases in which <PRTPAGE P="145"/>the provisions of Chapter 98, Subchapter XIII, HTSUS (19 U.S.C. 1202), are not met, however, the port director will proceed as if a bond had been filed to cover the particular importation. Articles temporarily imported by a Government agency or office under this section are entitled to immediate delivery under the procedures set forth in § 10.101.</P> <CITA>[T.D. 77-23, 42 FR 2311, Jan. 11, 1977, as amended by T.D. 89-1, 53 FR 51251, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Wheat</HD> <SECTION> <SECTNO>§ 10.106</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Rescue and Relief Work</HD> <SECTION> <SECTNO>§ 10.107</SECTNO> <SUBJECT>Equipment and supplies; admission.</SUBJECT> <P>(a) There shall be admitted without entry and without the payment of duty or any tax imposed upon or by reason of importation of any article described in section 322(b), Tariff Act of 1930, as amended, subject to compliance with the following conditions:</P> <P>(1) Before importation or as soon thereafter as possible, and in every case before the expiration of 10 days after importation, a report shall be made to the nearest Customs officer by the person in charge of sending the article from the foreign country, or by the person for whose account it was brought into the United States, stating the character, quantity, destination, and use to be made of the article.</P> <P>(2) If practicable, the article shall be exported under Customs supervision. In any other case a report shall be made by the person in charge of the exportation as soon as possible after exportation to the Customs officer to whom the arrival was reported, stating the character, quantity, and circumstances of the exportation.</P> <P>(b) In the case of each article admitted under paragraph (a) of this section, the port director shall satisfy himself as to whether the article was exported within a reasonable time, or that it has been properly expended or destroyed. If an article is so far destroyed, in connection with a use contemplated for it by section 322 (b) that it has only a salvage value, it shall not be required to be exported.</P> <P>(c) Any article admitted under paragraph (a) of this section which is used in the United States otherwise than for a purpose contemplated for it by section 322(b), or which is not exported within 90 days after its arrival in the United States, or within such longer time as may be specially authorized by the port director or Headquarters, U.S. Customs Service, shall be seized and forfeited to the United States.</P> <CITA>[28 FR 14663, Dec. 31, 1963, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Products Exported Under Lease and Reimported</HD> <SECTION> <SECTNO>§ 10.108</SECTNO> <SUBJECT>Entry of reimported articles exported under lease.</SUBJECT> <P>Free entry shall be accorded under subheading 9801.00.20, Harmonized Tariff Schedule of the United States (HTSUS), whenever it is established to the satisfaction of the port director that the article for which free entry is claimed was duty paid on a previous importation or was previously entered free of duty pursuant to the Caribbean Basin Economic Recovery Act or Title V of the Trade Act of 1974, is being reimported without having been advanced in value or improved in condition by any process of manufacture or other means, was exported from the United States under a lease or similar use agreement, and is being reimported by or for the account of the person who imported it into, and exported it from, the United States.</P> <CITA>[T.D. 94-40, 59 FR 17474, Apr. 13, 1994]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Strategic Materials Obtained by Barter or Exchange</HD> <SECTION> <SECTNO>§ 10.110</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Late Filing of Free Entry and Reduced Duty Documents</HD> <SECTION> <SECTNO>§ 10.112</SECTNO> <SUBJECT>Filing free entry documents or reduced duty documents after entry.</SUBJECT> <P>Whenever a free entry or a reduced duty document, form, or statement required to be filed in connection with the entry is not filed at the time of the entry or within the period for which a bond was filed for its production, but failure to file it was not due to willful <PRTPAGE P="146"/>negligence or fraudulent intent, such document, form, or statement may be filed at any time prior to liquidation of the entry or, if the entry was liquidated, before the liquidation becomes final. See § 113.43(c) of this chapter for satisfaction of the bond and cancellation of the bond charge.</P> <CITA>[T.D. 74-227, 39 FR 32015, Sept. 4, 1974]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Instruments and Apparatus for Educational and Scientific Institutions</HD> <SECTION> <SECTNO>§ 10.114</SECTNO> <SUBJECT>General provisions.</SUBJECT> <P>The consolidated regulations of the Commerce and Treasury Departments relating to the entry of instruments and apparatus for educational and scientific institutions are contained in 15 CFR part 301.</P> <CITA>[T.D. 82-224, 47 FR 53727, Nov. 29, 1982]</CITA> </SECTION> <SECTION> <SECTNO>§§ 10.115-10.119</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Visual or Auditory Materials</HD> <SECTION> <SECTNO>§ 10.121</SECTNO> <SUBJECT>Visual or auditory materials of an educational, scientific, or cultural character.</SUBJECT> <P>(a) Where photographic film and other articles described in subheading 9817.00.40, Harmonized Tariff Schedule of the United States (HTSUS), are claimed to be free of duty under subheading 9817.00.40, HTSUS, there shall be filed in connection with the entry covering such articles a document issued by the U.S. Information Agency certifying that it has determined that the articles are visual or auditory materials of an educational, scientific, or cultural character within the meaning of the Agreement for Facilitating the International Circulation of Visual and Auditory Materials of an Educational, Scientific, and Cultural Character as required by U.S. Note 1, Subchapter XVII, chapter 98, HTSUS.</P> <P>(b) Articles entered under subheading 9817.00.40, Harmonized Tariff Schedule of the United States (HTSUS), shall be released from Customs custody prior to submission of the document required in paragraph (a) of this section only upon the deposit of estimated duties with the port director. Liquidation of an entry covering merchandise which has been released under this procedure shall be suspended for a period of 90 days from the date of entry or until the required document is submitted, whichever occurs first. In the event that the director of the port of entry does not receive the required document within the 90-day period, the merchandise shall be immediately classified and liquidated in the ordinary course, without regard to subheading 9817.00.40, HTSUS.</P> <CITA>[T.D. 67-185, 32 FR 11641, Aug. 11, 1967, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 90-78, 55 FR 40166, Oct. 2, 1990]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Rate of Duty Dependent Upon Actual Use</HD> <SECTION> <SECTNO>§ 10.131</SECTNO> <SUBJECT>Circumstances in which applicable.</SUBJECT> <P>The provisions of §§ 10.131 through 10.139 are applicable in those circumstances in which the rate of duty applicable to merchandise is dependent upon actual use, unless there is a specific provision in this part which governs the treatment of the merchandise. However, specific marking or certification requirements, such as those for bolting cloths in section 10.58, may be applicable to merchandise subject to the provisions of sections 10.131-10.139.</P> <CITA>[T.D. 71-139, 36 FR 10726, June 2, 1971, as amended by T.D. 86-118, 51 FR 22515, June 20, 1986]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.132</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 10.133</SECTNO> <SUBJECT>Conditions required to be met.</SUBJECT> <P>When the tariff classification of any article is controlled by its actual use in the United States, three conditions must be met in order to qualify for free entry or a lower rate of duty unless the language of the particular subheading of the Harmonized Tariff Schedule of the United States applicable to the merchandise specifies other conditions. The conditions are that:</P> <P>(a) Such use is intended at the time of importation.</P> <P>(b) The article is so used.</P> <P>(c) Proof of use is furnished within 3 years after the date the article is entered or withdrawn from warehouse for consumption.</P> <CITA>[T.D. 71-139, 36 FR 10726, June 2, 1971, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <PRTPAGE P="147"/> <SECTNO>§ 10.134</SECTNO> <SUBJECT>Declaration of intent.</SUBJECT> <P>A showing of intent by the importer as to the actual use of imported merchandise shall be made by filing with the entry for consumption or for warehouse a declaration as to the intended use of the merchandise, or by entering the proper subheading of an actual use provision of the Harmonized Tariff Schedule of the United States (HTSUS) and the reduced or free rate of duty on the entry form. Entry made under an actual use provision of the HTSUS may be construed as a declaration that the merchandise is entered to be used for the purpose stated in the HTSUS, provided the port director is satisfied the merchandise will be so used. However, the port director shall require a written declaration to be filed if he is not satisfied that merchandise entered under an actual use provision will be used for the purposes stated in the HTSUS.</P> <CITA>[T.D. 71-139, 36 FR 10726, June 2, 1971, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.135</SECTNO> <SUBJECT>Deposit of duties.</SUBJECT> <P>When the requirement of § 10.134 has been met the merchandise may be entered or withdrawn from warehouse for consumption without deposit of duty when proof of use will result in free entry, or with deposit of duty at the lower rate when proof of use will result in a lower rate of duty.</P> <CITA>[T.D. 71-139, 36 FR 10726, June 2, 1971, as amended by T.D. 84-213, 49 FR 41166, Oct. 19, 1984]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.136</SECTNO> <SUBJECT>Suspension of liquidation.</SUBJECT> <P>Liquidation of an entry covering merchandise for which a declaration of intent has been made pursuant to § 10.134 and any required deposit of duties made, shall be suspended until proof of use is furnished or the 3-year period allowed for production thereof has expired.</P> <CITA>[T.D. 71-139, 36 FR 10726, June 2, 1971]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.137</SECTNO> <SUBJECT>Records of use.</SUBJECT> <P>(a) <E T="03">Maintenance by importer.</E> The importer shall maintain accurate and detailed records showing the use or other disposition of the imported merchandise. The burden shall be on the importer to keep records so that the claim of actual use can be readily established.</P> <P>(b) <E T="03">Retention of records.</E> The importer shall retain records of use or disposition for a period of 3 years from the date of liquidation of the entry.</P> <P>(c) <E T="03">Examination of records.</E> The rec-ords required to be kept by paragraph (a) of this section shall be available at all times for examination and inspection by an authorized Customs officer.</P> <CITA>[T.D. 71-139, 36 FR 10726, June 2, 1971]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.138</SECTNO> <SUBJECT>Proof of use.</SUBJECT> <P>Within 3 years from the date of entry or withdrawal from warehouse for consumption, the importer shall submit in duplicate in support of his claim for free entry or for a reduced rate of duty a certificate executed by (1) the superintendent or manager of the manufacturing plant, or (2) the individual end-user or other person having knowledge of the actual use of the imported article. The certificate shall include a description of the processing in sufficient detail to show that the use contemplated by the law has actually taken place. A blanket certificate covering all purchases of a given type of merchandise from a particular importer during a given period, or all such purchases with specified exceptions, may be accepted for this purpose, provided the importer shall furnish a statement showing in detail, in such manner as to be readily identified with each entry, the merchandise which he sold to such manufacturer or end-user during such period.</P> <CITA>[T.D. 71-139, 36 FR 10727, June 2, 1971]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.139</SECTNO> <SUBJECT>Liquidation.</SUBJECT> <P>(a) <E T="03">In general.</E> Upon satisfactory proof of timely use of the merchandise for the purpose specified by law, the entry shall be liquidated free of duty or at the lower rate of duty specified by law. When such proof is not filed within 3 years from the date of entry or withdrawal from warehouse for consumption, the entry shall be liquidated dutiable under the appropriate subheading of the Harmonized Tariff Schedule of the United States.</P> <P>(b) <E T="03">Exception for blackstrap molasses.</E> An entry covering blackstrap molasses, <PRTPAGE P="148"/>as hereinafter defined, may be accepted and liquidated with duty at the lower rate after the filing of the declaration of intent required by § 10.134 and the deposit of estimated duties required by § 10.135 without compliance with §§ 10.136, 10.137, and 10.138. Blackstrap molasses is “final” molasses practically free from sugar crystals, containing not over 58 percent total sugars and having a ratio of </P> <FP SOURCE="FP-1">total sugars×100/Brix</FP> <FP>not in excess of 71. In the event of doubt, an ash determination may be made. An ash content of not less than 7 percent indicates a blackstrap molasses within the meaning of this paragraph.</FP> <CITA>[T.D. 71-139, 36 FR 10727, June 2, 1971, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Importations Not Over $200 and Bona Fide Gifts</HD> <SECTION> <SECTNO>§ 10.151</SECTNO> <SUBJECT>Importations not over $200.</SUBJECT> <P>Subject to the conditions in § 10.153 of this part, the port director shall pass free of duty and tax any shipment of merchandise, as defined in § 101.1 of this chapter, imported by one person on one day having a fair retail value, as evidenced by an oral declaration or the bill of lading (or other document filed as the entry) or manifest listing each bill of lading, in the country of shipment not exceeding $200, unless he has reason to believe that the shipment is one of several lots covered by a single order or contract and that it was sent separately for the express purpose of securing free entry therefor or of avoiding compliance with any pertinent law or regulation. Merchandise subject to this exemption shall be entered under the informal entry procedures (see subpart C, part 143, and §§ 128.24, 145.31, 148.12, and 148.62, of this chapter).</P> <CITA>[T.D. 94-51, 59 FR 30293, June 13, 1994, as amended by T.D. 95-31, 60 FR 18990, Apr. 14, 1995; T.D. 95-31, 60 FR 37875, July 24, 1995; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.152</SECTNO> <SUBJECT>Bona-fide gifts.</SUBJECT> <P>Subject to the conditions in § 10.153 of this part, the port director shall pass free of duty and tax any article sent as a bona-fide gift from a person in a foreign country to a person in the United States, provided that the aggregate fair retail value in the country of shipment of such articles received by one person on one day does not exceed $100 or, in the case of articles sent from a person in the Virgin Islands, Guam, and American Samoa, $200. Articles subject to this exemption shall be entered under the informal entry procedures (see subpart C, part 143, and §§ 145.32, 148.12, 148.51, and 148.64, of this chapter). An article is “sent” for purposes of this section if it is conveyed in any manner other than on the person or in the accompanied or unaccompanied baggage of the donor or donee.</P> <CITA>[T.D. 94-51, 59 FR 30293, June 13, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.153</SECTNO> <SUBJECT>Conditions for exemption.</SUBJECT> <P>Customs officers shall be further guided as follows in determining whether an article or parcel shall be exempted from duty and tax under § 10.151 or § 10.152:</P> <P>(a) A “bona fide gift” for purposes of § 10.152 is an article formerly owned by a donor (may be a commercial firm) who gave it outright in its entirety to a donee without compensation or promise of compensation. It does not include articles acquired by purchase, barter, promissory exchange, or similar transaction, nor does it include articles said to be “given” in conjunction with a purchase, barter, promissory exchange, or similar transaction, such as a so-called bonus article.</P> <P>(b) A parcel addressed to a person in the United States from an individual in a foreign country which contains a gift should be clearly marked on the outside to indicate that it contains a gift. Such marking is not conclusive evidence of a gift nor is the absence of such marking conclusive evidence that an article is not a gift. Ordinarily an article not exceeding $100 in fair retail value in the country of shipment sent from a person in a foreign country to a person in the United States ($200, in the case of an article sent from a person in the Virgin Islands, Guam, and American Samoa) will be recognizable as a gift from the nature of the article and obvious facts surrounding the shipment.<PRTPAGE P="149"/> </P> <P>(c) A parcel addressed to a person in the United States from a business firm in a foreign country would ordinarily not contain a gift from a donor in the foreign country. When such a parcel in fact contains an article entitled to free entry under § 10.152, the parcel should be clearly marked to indicate that it contains such a gift and a statement to this effect should be enclosed in the parcel.</P> <P>(d) Consolidated shipments addressed to one consignee shall be treated for purposes of §§ 10.151 and 10.152 as one importation. The foregoing shall not apply to shipments of bona fide gifts consolidated abroad for shipment to the United States when:</P> <P>(1) The consolidation for shipment to the United States is in a cargo van or similar containerization which is consigned to a common carrier, freight forwarder, freight handler, or other public service agency for distribution of the gift packages;</P> <P>(2) The separate gifts not exceeding $100 in fair retail value in the country of shipment ($200, in the case of articles sent from persons in the Virgin Islands, Guam, and American Samoa) included in the consolidated shipment are before shipment individually wrapped and addressed to the donee in the United States;</P> <P>(3) Each gift package is marked on the outside to indicate that it contains a gift not exceeding $100 in fair retail value in the country of shipment ($200, in the case of packages sent from persons in the Virgin Islands, Guam, and American Samoa); and</P> <P>(4) Each gift package is separately listed in the name of the addressee-donee on a packing list, manifest, bill of lading, or other shipping document.</P> <P>(e) No alcoholic beverage, perfume containing alcohol (except where the aggregate fair retail value in the country of shipment of all merchandise contained in the shipment does not exceed $5), cigars, or cigarettes shall be exempted from the payment of duty and tax under § 10.151 or § 10.152.</P> <P>(f) The exemptions provided for in § 10.151 or § 10.152 are not to be allowed in respect of any shipment containing one or more gifts having an aggregate fair retail value in the country of shipment in excess of $100 ($200, in the case of articles sent from persons in the Virgin Islands, Guam, and American Samoa), except as indicated in paragraph (d) of this section. For example, an article ordinarily subject to an ad valorem rate of duty but sent as a gift, if the fair retail value exceeds the $100 (or $200) exemption, would be subject to a duty based upon its value under the provisions of section 402 or 402(a), Tariff Act of 1930, as amended (19 U.S.C. 1401a or 1402), even though the dutiable value is less than the $100 (or $200) exemption.</P> <P>(g) The exemption referred to in § 10.151 is not to be allowed in the case of any merchandise of a class or kind provided for in any absolute or tariff-rate quota, whether the quota is open or closed. In the case of merchandise of a class or kind provided for in a tariff-rate quota, the merchandise is subject to the rate of duty in effect on the date of entry.</P> <CITA>[T.D. 73-175, 38 FR 17445, July 2, 1973, as amended by T.D. 75-185, 40 FR 31753, July 29, 1975; T.D. 78-394, 43 FR 49787, Oct. 25, 1978; T.D. 85-123, 50 FR 29953, July 23, 1985; T.D. 94-51, 59 FR 30293, June 13, 1994]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Generalized System of Preferences</HD> <SECTION> <SECTNO>§ 10.171</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) <E T="03">Statutory authority.</E> Title V of the Trade Act of 1974 as amended (19 U.S.C. 2461-2467) authorizes the President to establish a Generalized System of Preferences (GSP) to provide duty-free treatment for eligible articles imported directly from designated beneficiary developing countries. Beneficiary developing countries and articles eligible for duty-free treatment are designated by the President by Executive order in accordance with sections 502(a)(1) and 503(a) of the Trade Act of 1974 as amended (19 U.S.C. 2462(a)(1), 2463(a)).</P> <P>(b) <E T="03">Country defined.</E> For purposes of §§ 10.171 through 10.178, except as otherwise provided in § 10.176(a), the term “country” means any foreign country, any overseas dependent territory or possession of a foreign country, or the Trust Territory of the Pacific Islands. In the case of an association of countries which is a free trade area or customs union or which is contributing to <PRTPAGE P="150"/>comprehensive regional economic integration among its members through appropriate means, including but not limited to, the reduction of duties, the President may by Executive order provide that all members of such association other than members which are barred from designation under section 502(b) of the Trade Act of 1974 (19 U.S.C. 2462(b)) shall be treated as one country for purposes of §§ 10.171 through 10.178.</P> <CITA>[T.D. 76-2, 40 FR 60047, Dec. 31, 1975, as amended by T.D. 80-271, 45 FR 75641, Nov. 17, 1980; T.D. 00-67, 65 FR 59675, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.172</SECTNO> <SUBJECT>Claim for exemption from duty under the Generalized System of Preferences.</SUBJECT> <P>A claim for an exemption from duty on the ground that the Generalized System of Preferences applies shall be allowed by the port director only if he is satisfied that the requirements set forth in this section and §§ 10.173 through 10.178 have been met. If duty-free treatment is claimed at the time of entry, a written claim shall be filed on the entry document by placing the symbol “A” as a prefix to the subheading of the Harmonized Tariff Schedule of the United States for each article for which such treatment is claimed.</P> <CITA>[T.D. 76-2, 40 FR 60048, Dec. 31, 1975, as amended by T.D. 77-36, 42 FR 5041, Jan. 27, 1977; T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 94-47, 59 FR 25569, May 17, 1994; T.D. 99-27, 64 FR 13675, Mar. 22, 1999]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.173</SECTNO> <SUBJECT>Evidence of country of origin.</SUBJECT> <P>(a) <E T="03">Shipments covered by a formal entry—</E>(1) <E T="03">Merchandise not wholly the growth, product, or manufacture of a beneficiary developing country.</E> (i) <E T="03">Declaration.</E> In a case involving merchandise covered by a formal entry which is not wholly the growth, product, or manufacture of a single beneficiary developing country, the exporter of the merchandise or other appropriate party having knowledge of the relevant facts shall be prepared to submit directly to the port director, upon request, a declaration setting forth all pertinent detailed information concerning the production or manufacture of the merchandise. When requested by the port director, the declaration shall be prepared in substantially the following form:</P> <EXTRACT> <HD SOURCE="HD1">GSP DECLARATION</HD> <FP SOURCE="FP-DASH">I,</FP> <FP>(name), hereby declare that the articles described below were produced or manufactured in ________ (country) by means of processing operations performed in that country as set forth below and were also subjected to processing operations in the other country or countries which are members of the same association of countries as set forth below and incorporate materials produced in the country named above or in any other country or countries which are members of the same association of countries as set forth below:</FP> </EXTRACT> <GPOTABLE CDEF="s50,xls40,xls40,xls40,xls40,xls40" COLS="6" OPTS="L2,i1"> <BOXHD> <CHED H="1">Number and date of invoices</CHED> <CHED H="1">Description of articles and quantity</CHED> <CHED H="1">Processing operations performed on articles</CHED> <CHED H="2">Description of processing operations and country of processing</CHED> <CHED H="2">Direct costs of processing operations</CHED> <CHED H="1">Materials produced in a beneficiary developing country or members of the same association</CHED> <CHED H="2">Description of material, production process, and country of production</CHED> <CHED H="2">Cost or value of material</CHED> </BOXHD> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> </GPOTABLE> <EXTRACT> <FP SOURCE="FP-DASH">Date</FP> <FP SOURCE="FP-DASH">Address</FP> <FP SOURCE="FP-DASH">Signature</FP> <FP SOURCE="FP-DASH">Title</FP> </EXTRACT> <P>(ii) <E T="03">Retention of records and submission of declaration.</E> The information necessary for preparation of the declaration shall be retained in the files of the party responsible for its preparation and submission for a period of 5 years. In the event that the port director requests submission of the declaration during the 5-year period, it shall be <PRTPAGE P="151"/>submitted by the appropriate party directly to the port director within 60 days of the date of the request or such additional period as the port director may allow for good cause shown. Failure to submit the declaration in a timely fashion will result in a denial of duty-free treatment.</P> <P>(2) <E T="03">Merchandise wholly the growth, product, or manufacture of a beneficiary developing country.</E> In a case involving merchandise covered by a formal entry which is wholly the growth, product, or manufacture of a single beneficiary developing country, a statement to that effect shall be included on the commercial invoice provided to Customs.</P> <P>(b) <E T="03">Shipments covered by an informal entry.</E> Although the filing of the declaration provided for in paragraph (a)(1)(i) of this section will not be required for a shipment covered by an informal entry, the port director may require such other evidence of country of origin as deemed necessary.</P> <P>(c) <E T="03">Verification of documentation.</E> Any evidence of country of origin submitted under this section shall be subject to such verification as the port director deems necessary. In the event that the port director is prevented from obtaining the necessary verification, the port director may treat the entry as dutiable.</P> <CITA>[T.D. 94-47, 59 FR 25569, May 17, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.174</SECTNO> <SUBJECT>Evidence of direct shipment.</SUBJECT> <P>(a) <E T="03">Documents constituting evidence of direct shipment.</E> The port director may require that appropriate shipping papers, invoices, or other documents be submitted within 60 days of the date of entry as evidence that the articles were “imported directly”, as that term is defined in § 10.175. Any evidence of direct shipment required by the port director shall be subject to such verification as he deems necessary.</P> <P>(b) <E T="03">Waiver of evidence of direct shipment.</E> The port director may waive the submission of evidence of direct shipment when he is otherwise satisfied, taking into consideration the kind and value of the merchandise, that the merchandise clearly qualifies for treatment under the Generalized System of Preferences.</P> <CITA>[T.D. 76-2, 40 FR 60048, Dec. 31, 1975, as amended by T.D. 77-27, 42 FR 3162, Jan. 17, 1977]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.175</SECTNO> <SUBJECT>Imported directly defined.</SUBJECT> <P>Eligible articles shall be imported directly from a beneficiary developing country to qualify for treatment under the Generalized System of Preferences. For purposes of §§ 10.171 through 10.178 the words “imported directly” mean:</P> <P>(a) Direct shipment from the beneficiary country to the United States without passing through the territory of any other country; or</P> <P>(b) If the shipment is from a beneficiary developing country to the U.S. through the territory of any other country, the merchandise in the shipment does not enter into the commerce of any other country while en route to the U.S., and the invoice, bills of lading, and other shipping documents show the U.S. as the final destination; or</P> <P>(c) If shipped from the beneficiary developing country to the United States through a free trade zone in a beneficiary developing country, the merchandise shall not enter into the commerce of the country maintaining the free trade zone, and</P> <P>(1) The eligible articles must not undergo any operation other than:</P> <P>(i) Sorting, grading, or testing,</P> <P>(ii) Packing, unpacking, changes of packing, decanting or repacking into other containers,</P> <P>(iii) Affixing marks, labels, or other like distinguishing signs on articles or their packing, if incidental to operations allowed under this section, or</P> <P>(iv) Operations necessary to ensure the preservation of merchandise in its condition as introduced into the free trade zone.</P> <P>(2) Merchandise may be purchased and resold, other than at retail, for export within the free trade zone.</P> <P>(3) For the purposes of this section, a free trade zone is a predetermined area or region declared and secured by or under governmental authority, where certain operations may be performed with respect to articles, without such <PRTPAGE P="152"/>articles having entered into the commerce of the country maintaining the free trade zone; or</P> <P>(d) If the shipment is from any beneficiary developing country to the U.S through the territory of any other country and the invoices and other documents do not show the U.S as the final destination, the articles in the shipment upon arrival in the U.S. are imported directly only if they:</P> <P>(1) Remained under the control of the customs authority of the intermediate country;</P> <P>(2) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the latter's sales agent; and</P> <P>(3) Were not subjected to operations other than loading and unloading, and other activities necessary to preserve the articles in good condition; or</P> <P>(e)(1) Shipment to the U.S. from a beneficiary developing country which is a member of an association of countries treated as one country under section 507(2), Trade Act of 1974, as amended (19 U.S.C. 2467(2)), through the territory of a former beneficiary developing country whose designation as a member of the same association for GSP purposes was terminated by the President pursuant to section 502(d), Trade Act of 1974, as amended (19 U.S.C. 2462(d)), provided the articles in the shipment did not enter into the commerce of the former beneficiary developing country except for purposes of performing one or more of the operations specified in paragraph (c)(1) of this section and except for purposes of purchase or resale, other than at retail, for export.</P> <P>(2) The designation of the following countries as members of an association of countries for GSP purposes has been terminated by the President pursuant to section 502(d) of the Trade Act of 1974 (19 U.S.C. 2462(d)): </P> <EXTRACT> <FP SOURCE="FP-1">The Bahamas</FP> <FP SOURCE="FP-1">Brunei Darussalam</FP> <FP SOURCE="FP-1">Malaysia</FP> <FP SOURCE="FP-1">Singapore</FP> </EXTRACT> <CITA>[T.D. 76-2, 40 FR 60048, Dec. 31, 1975, as amended by T.D. 83-144, 48 FR 29684, June 28, 1983; T.D. 84-237, 49 FR 47992, Dec. 7, 1984; T.D. 86-107, 51 FR 20816, June 9, 1986; T.D. 92-6, 57 FR 2018, Jan. 17, 1992; T.D. 94-47, 59 FR 25569, May 17, 1994; T.D. 95-30, 60 FR 18543, Apr. 12, 1995; T.D. 00-67, 65 FR 59675, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.176</SECTNO> <SUBJECT>Country of origin criteria.</SUBJECT> <P>(a) <E T="03">Merchandise produced in a beneficiary developing country or any two or more countries which are members of the same association of countries</E>—(1) <E T="03">General.</E> Except as otherwise provided in this section, any article which either is wholly the growth, product, or manufacture of, or is a new or different article of commerce that has been grown, produced, or manufactured in, a beneficiary developing country may qualify for duty-free entry under the Generalized System of Preferences (GSP). No article will be considered to have been grown, produced, or manufactured in a beneficiary developing country by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. Duty-free entry under the GSP may be accorded to an article only if the sum of the cost or value of the materials produced in the beneficiary developing country or any two or more countries that are members of the same association of countries and are treated as one country under section 507(2) of the Trade Act of 1974, as amended (19 U.S.C. 2467(2)), plus the direct costs of processing operations performed in the beneficiary developing country or member countries, is not less than 35 percent of the appraised value of the article at the time it is entered.</P> <P>(2) <E T="03">Combining, packaging, and diluting operations.</E> No article which has undergone only a simple combining or packaging operation or a mere dilution in a beneficiary developing country within the meaning of paragraph (a)(1) of this section will be entitled to duty-free treatment even though the processing operation causes the article to meet the value requirement set forth in that <PRTPAGE P="153"/>paragraph. For purposes of this section:</P> <P>(i) Simple combining or packaging operations and mere dilution include, but are not limited to, the following:</P> <P>(A) The addition of batteries to devices;</P> <P>(B) Fitting together a small number of components by bolting, glueing, soldering, <E T="03">etc.;</E> </P> <P>(C) Blending foreign and beneficiary developing country tobacco;</P> <P>(D) The addition of substances such as anticaking agents, preservatives, wetting agents, etc.;</P> <P>(E) Repacking or packaging components together;</P> <P>(F) Reconstituting orange juice by adding water to orange juice concentrate; and</P> <P>(G) Diluting chemicals with inert ingredients to bring them to standard degrees of strength;</P> <P>(ii) Simple combining or packaging operations and mere dilution will not be taken to include processes such as the following:</P> <P>(A) The assembly of a large number of discrete components onto a printed circuit board;</P> <P>(B) The mixing together of two bulk medicinal substances followed by the packaging of the mixed product into individual doses for retail sale;</P> <P>(C) The addition of water or another substance to a chemical compound under pressure which results in a reaction creating a new chemical compound; and</P> <P>(D) A simple combining or packaging operation or mere dilution coupled with any other type of processing such as testing or fabrication (for example, a simple assembly of a small number of components, one of which was fabricated in the beneficiary developing country where the assembly took place); and</P> <P>(iii) The fact that an article has undergone more than a simple combining or packaging operation or mere dilution is not necessarily dispositive of the question of whether that processing constitutes a substantial transformation for purposes of determining the country of origin of the article.</P> <P>(b) [Reserved]</P> <P>(c) <E T="03">Merchandise grown, produced, or manufactured in a beneficiary developing country.</E> Merchandise which is wholly the growth, product, or manufacture of a beneficiary developing country, or an association of countries treated as one country under section 507(2) of the Trade Act of 1974 (19 U.S.C. 2467(2)) and § 10.171(b), and manufactured products consisting of materials produced only in such country or countries, shall normally be presumed to meet the requirements set forth in this section.</P> <CITA>[T.D. 76-2, 40 FR 60048, Dec. 31, 1975, as amended by T.D. 80-271, 45 FR 75641, Nov. 17, 1980; T.D. 00-67, 65 FR 59675, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.177</SECTNO> <SUBJECT>Cost or value of materials produced in the beneficiary developing country.</SUBJECT> <P>(a) <E T="03">“Produced in the beneficiary developing country” defined.</E> For purposes of §§ 10.171 through 10.178, the words “produced in the beneficiary developing country” refer to the constituent materials of which the eligible article is composed which are either:</P> <P>(1) Wholly the growth, product, or manufacture of the beneficiary developing country; or</P> <P>(2) Substantially transformed in the beneficiary developing country into a new and different article of commerce.</P> <P>(b) <E T="03">Questionable origin.</E> When the origin of an article either is not ascertainable or not satisfactorily demonstrated to the port director, the article shall not be considered to have been produced in the beneficiary developing country.</P> <P>(c) <E T="03">Determination of cost or value of materials produced in the beneficiary developing country.</E> (1) The cost or value of materials produced in the beneficiary developing country includes:</P> <P>(i) The manufacturer's actual cost for the materials;</P> <P>(ii) When not included in the manufacturer's actual cost for the materials, the freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant;</P> <P>(iii) The actual cost of waste or spoilage (material list), less the value of recoverable scrap; and</P> <P>(iv) Taxes and/or duties imposed on the materials by the beneficiary developing country, or an association of <PRTPAGE P="154"/>countries treated as one country, provided they are not remitted upon exportation.</P> <P>(2) Where the material is provided to the manufacturer without charge, or at less than fair market value, its cost or value shall be determined by computing the sum of:</P> <P>(i) All expenses incurred in the growth, production, manufacture or assembly of the material, including general expenses;</P> <P>(ii) An amount for profit; and</P> <P>(iii) Freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant.</P> <FP>If the pertinent information needed to compute the cost or value of the materials is not available, the appraising officer may ascertain or estimate the value thereof using all reasonable ways and means at his disposal.</FP> <CITA>[T.D. 76-2, 40 FR 60049, Dec. 31, 1975, as amended by T.D. 86-118, 51 FR 22515, June 20, 1986]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.178</SECTNO> <SUBJECT>Direct costs of processing operations performed in the beneficiary developing country.</SUBJECT> <P>(a) <E T="03">Items included in the direct costs of processing operations.</E> As used in § 10.176, the words “direct costs of processing operations” means those costs either directly incurred in, or which can be reasonably allocated to, the growth, production, manufacture, or assembly of the specific merchandise under consideration. Such costs include, but are not limited to:</P> <P>(1) All actual labor costs involved in the growth, production, manufacture, or assembly of the specific merchandise, including fringe benefits, on-the-job training, and the cost of engineering, supervisory, quality control, and similar personnel;</P> <P>(2) Dies, molds, tooling, and depreciation on machinery and equipment which are allocable to the specific merchandise;</P> <P>(3) Research, development, design, engineering, and blueprint costs insofar as they are allocable to the specific merchandise; and</P> <P>(4) Costs of inspecting and testing the specific merchandise.</P> <P>(b) <E T="03">Items not included in the direct costs of processing operations.</E> Those items which are not included within the meaning of the words “direct costs of processing operations” are those which are not directly attributable to the merchandise under consideration or are not “costs” of manufacturing the product. These include, but are not limited to:</P> <P>(1) Profit; and</P> <P>(2) General expenses of doing business which are either not allocable to the specific merchandise or are not related to the growth, production, manufacture, or assembly of the merchandise, such as administrative salaries, casualty and liability insurance, advertising, and salesmen's salaries, commissions, or expenses.</P> <CITA>[T.D. 76-2, 40 FR 60049, Dec. 31, 1975]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.178a</SECTNO> <SUBJECT>Special duty-free treatment for sub-Saharan African countries.</SUBJECT> <P>(a) <E T="03">General.</E> Section 506A of the Trade Act of 1974 (19 U.S.C. 2466a) authorizes the President to provide duty-free treatment for certain articles otherwise excluded from duty-free treatment under the Generalized System of Preferences (GSP) pursuant to section 503(b)(1)(B) through (G) of the Trade Act of 1974 (19 U.S.C. 2463(b)(1)(B) through (G)) and authorizes the President to designate a country listed in section 107 of the African Growth and Opportunity Act (19 U.S.C. 3706) as an eligible beneficiary sub-Saharan African country for purposes of that duty-free treatment.</P> <P>(b) <E T="03">Eligible articles.</E> The duty-free treatment referred to in paragraph (a) of this section will apply to any article within any of the following classes of articles, provided that the article in question has been designated by the President for that purpose and is the growth, product, or manufacture of an eligible beneficiary sub-Saharan African country and meets the requirements specified or referred to in paragraph (d) of this section:</P> <P>(1) Watches, except those watches entered after June 30, 1989, that the President specifically determines, after public notice and comment, will not cause material injury to watch or watch band, strap, or bracelet manufacturing and assembly operations in the United States or the United States insular possessions;<PRTPAGE P="155"/> </P> <P>(2) Certain electronic articles;</P> <P>(3) Certain steel articles;</P> <P>(4) Footwear, handbags, luggage, flat goods, work gloves, and leather wearing apparel which were not eligible articles for purposes of the GSP on January 1, 1995, as the GSP was in effect on that date;</P> <P>(5) Certain semimanufactured and manufactured glass products; and</P> <P>(6) Any other articles which the President determines to be import-sensitive in the context of the GSP.</P> <P>(c) <E T="03">Claim for duty-free treatment.</E> A claim for the duty-free treatment referred to in paragraph (a) of this section must be made by placing on the entry document the symbol “D” as a prefix to the subheading of the Harmonized Tariff Schedule of the United States for each article for which duty-free treatment is claimed;</P> <P>(d) <E T="03">Origin and related rules.</E> The provisions of §§ 10.171, 10.173, and 10.175 through 10.178 will apply for purposes of duty-free treatment under this section. However, application of those provisions in the context of this section will be subject to the following rules:</P> <P>(1) The term “beneficiary developing country,” wherever it appears, means “beneficiary sub-Saharan African country;'</P> <P>(2) In the GSP declaration set forth in § 10.173(a)(1)(i), the column heading “Materials produced in a beneficiary developing country or members of the same association” should read “Material produced in a beneficiary sub-Saharan African country or in the U.S.;”</P> <P>(3) The provisions of § 10.175(c) will not apply; and</P> <P>(4) For purposes of determining compliance with the 35 percent value content requirement set forth in § 10.176(a):</P> <P>(i) An amount not to exceed 15 percent of the appraised value of the article at the time it is entered may be attributed to the cost or value of materials produced in the customs territory of the United States, and the provisions of § 10.177 will apply for purposes of identifying materials produced in the customs territory of the United States and the cost or value of those materials; and</P> <P>(ii) The cost or value of materials included in the article that are produced in more than one beneficiary sub-Saharan African country may be applied without regard to whether those countries are members of the same association of countries.</P> <P>(e) <E T="03">Importer requirements.</E> In order to make a claim for duty-free treatment under this section, the importer:</P> <P>(1) Must have records that explain how the importer came to the conclusion that the article qualifies for duty-free treatment;</P> <P>(2) Must have records that demonstrate that the importer is claiming that the article qualifies for duty-free treatment because it is the growth of a beneficiary sub-Saharan African country or because it is the product of a beneficiary sub-Saharan African country or because it is the manufacture of a beneficiary sub-Saharan African country. If the importer is claiming that the article is the growth of a beneficiary sub-Saharan African country, the importer must have records that indicate that the product was grown in that country, such as a record of receipt from a farmer whose crops are grown in that country. If the importer is claiming that the article is the product of, or the manufacture of, a beneficiary sub-Saharan African country, the importer must have records that indicate that the manufacturing or processing operations reflected in or applied to the article meet the country of origin rules set forth in § 10.176(a) and paragraph (d) of this section. A properly completed GSP declaration in the form set forth in § 10.173(a)(1) is one example of a record that would serve this purpose;</P> <P>(3) Must establish and implement internal controls which provide for the periodic review of the accuracy of the declarations or other records referred to in paragraph (e)(2) of this section;</P> <P>(4) Must have shipping papers that show how the article moved from the beneficiary sub-Saharan African country to the United States. If the imported article was shipped through a country other than a beneficiary sub-Saharan African country and the invoices and other documents from the beneficiary sub-Saharan African country do not show the United States as the final destination, the importer also <PRTPAGE P="156"/>must have documentation that demonstrates that the conditions set forth in § 10.175(d)(1) through (3) were met;</P> <P>(5) Must have records that demonstrate the cost or value of the materials produced in the United States and the cost or value of the materials produced in a beneficiary sub-Saharan African country or countries and the direct costs of processing operations incurred in the beneficiary sub-Saharan African country that were relied upon by the importer to determine that the article met the 35 percent value content requirement set forth in § 10.176(a) and paragraph (c) of this section. A properly completed GSP declaration in the form set forth in § 10.173(a)(1) is one example of a record that would serve this purpose; and</P> <P>(6) Must be prepared to produce the records referred to in paragraphs (e)(1), (e)(2), (e)(4), and (e)(5) of this section within 30 days of a request from Customs and must be prepared to explain how those records and the internal controls referred to in paragraph (e)(3) of this section justify the importer's claim for duty-free treatment.</P> <CITA>[T.D. 00-67, 65 FR 59675, Oct. 5, 2000]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Canadian Crude Petroleum</HD> <SECTION> <SECTNO>§ 10.179</SECTNO> <SUBJECT>Canadian crude petroleum subject to a commercial exchange agreement between United States and Canadian refiners.</SUBJECT> <P>(a) Crude petroleum (as defined in Chapter 27, Additional U.S. Note 1, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202)) produced in Canada may be admitted free of duty if the entry is accompanied by a certificate from the importer establishing that:</P> <P>(1) The petroleum is imported pursuant to a commercial exchange agreement between United States and Canadian refiners which has been approved by the Secretary of Energy;</P> <P>(2) An equivalent amount of domestic or duty-paid foreign crude petroleum on which the importer has executed a written waiver of drawback, has been exported to Canada pursuant to the export license and previously has not been used to effect the duty-free entry of like Canadian products; and,</P> <P>(3) An export license has been issued by the Secretary of Commerce for the petroleum which has been exported to Canada.</P> <P>(b) The provisions of this section may be applied to:</P> <P>(1) Liquidated or reliquidated entries if the required certification is filed with the director of the port where the original entry was made on or before the 180th day after the date of entry; and</P> <P>(2) Articles entered, or withdrawn from warehouse, for consumption, pursuant to a commercial exchange agreement.</P> <P>(c) Verification of the quantities of crude petroleum exported to or imported from Canada under such a commercial exchange agreement shall be made in accordance with import verification provided in Part 151, Subpart C, Customs Regulations (19 CFR part 151, subpart C).</P> <CITA>[T.D. 81-292, 46 FR 58069, Nov. 30, 1981, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 91-82, 56 FR 49845, Oct. 2, 1991]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Certain Fresh, Chilled, or Frozen Beef</HD> <SECTION> <SECTNO>§ 10.180</SECTNO> <SUBJECT>Certification.</SUBJECT> <P>(a) The foreign official's meat-inspection certificate required by U.S. Department of Agriculture regulations (9 CFR 327.4) shall be modified to include the certification below when fresh, chilled, or frozen beef is to be entered under the provisions of subheadings 0201.20.10, 0201.30.02, 0202.20.02, 0202.20.10, Harmonized Tariff Schedule of the United States (HTSUS). The certification shall be made, prior to exportation of the beef, by an official of the government of the exporting country and filed with Customs with the entry summary or with the entry when the entry summary is filed at the time of entry. The requirements of this section shall be in addition to those requirements contained in 9 CFR 327.4. Appropriate officials of the exporting country should consult with the U.S. Department of Agriculture as to the beef grades or standards within their country that satisfy the certification requirement. Exporters or importers of beef to be entered under the provisions of subheadings 0201.20.10, 0201.30.02, <PRTPAGE P="157"/>0202.20.02, 0202.20.10, HTSUS, should consult with the U.S. Department of Agriculture prior to exportation in order to insure that the beef will satisfy the certification requirements. This certification is relevant only to U.S. Customs tariff classification and is not applicable to marketing of beef under U.S. Department of Agriculture grading standards, a matter within U.S. Department of Agriculture's jurisdiction.</P> <EXTRACT> <HD SOURCE="HD1">Certification</HD> <P>I hereby certify to the best of my knowledge and belief that the herein described fresh, chilled, or frozen beef, meets the specifications prescribed in regulations issued by the U.S. Department of Agriculture (7 CFR 2853.106 (a) and (b)).</P> </EXTRACT> <P>(b) Appropriate officials of the following countries have agreed with the U.S. Department of Agriculture as to the grades or standards for fresh, chilled, or frozen beef within their respective countries which will satisfy the certification requirements of paragraph (a) of this section: Canada.</P> <CITA>[T.D. 82-8, 47 FR 945, Jan. 8, 1982, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Watches and Watch Movements From U.S. Insular Possessions</HD> <SECTION> <SECTNO>§§ 10.181-10.182</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Civil Aircraft</HD> <SECTION> <SECTNO>§ 10.183</SECTNO> <SUBJECT>Duty-free entry of civil aircraft, aircraft engines, ground flight simulators, parts, components, and subassemblies.</SUBJECT> <P>(a) <E T="03">Applicability.</E> Except as provided in paragraph (b) of this section, this section applies to aircraft, aircraft engines, and ground flight simulators, including their parts, components, and subassemblies, that qualify as civil aircraft under General Note 6(b) ofthe Harmonized Tariff Schedule of the United States (HTSUS) by meeting the following requirements:</P> <P>(1) The aircraft, aircraft engines, ground flight simulators, or their parts, components, and subassemblies, are used as original or replacement equipment in the design, development, testing, evaluation, manufacture, repair, maintenance, rebuilding, modification, or conversion of aircraft; and</P> <P>(2) They are either:</P> <P>(i) Manufactured or operated pursuant to a certificate issued by the Administrator of the Federal Aviation Administration (FAA) under 49 U.S.C. 44704 or pursuant to the approval of the airworthiness authority in the country of exportation, if that approval is recognized by the FAA as an acceptable substitute for the FAA certificate;</P> <P>(ii) Covered by an application for such certificate, submitted to and accepted by the FAA, filed by an existing type and production certificate holder pursuant to 49 U.S.C. 44702 and implementing regulations (Federal Aviation Administration Regulations, title 14, Code of Federal Regulations); or</P> <P>(iii) Covered by an application for such approval or certificate which will be submitted in the future by an existing type and production certificate holder, pending the completion of design or other technical requirements stipulated by the FAA (applicable only to the quantities of parts, components, and subassemblies as are required to meet the stipulation).</P> <P>(b) <E T="03">Department of Defense or U.S. Coast Guard use.</E> If purchased for use by the Department of Defense or the United States Coast Guard, aircraft, aircraft engines, and ground flight simulators, including their parts, components, and subassemblies, are subject to this section only if they are used as original or replacement equipment in the design, development, testing, evaluation, manufacture, repair, maintenance, rebuilding, modification, or conversion of aircraft and meet the requirements of either paragraph (a)(2)(i) or (a)(2)(ii) of this section.</P> <P>(c) <E T="03">Claim for admission free of duty.</E> Merchandise qualifying under paragraph (a) or paragraph (b) of this section is entitled to duty-free admission in accordance with General Note 6, HTSUS, upon meeting the requirements of this section. An importer will make a claim for duty-free admission under this section and General Note 6, HTSUS, by properly entering qualifying merchandise under a provision for which the rate of duty “Free (C)” appears in the “Special” subcolumn of the HTSUS and by placing the special indicator “C” on the entry summary. The fact that qualifying merchandise <PRTPAGE P="158"/>has previously been exported with benefit of drawback does not preclude free entry under this section.</P> <P>(d) <E T="03">Importer certification.</E> In making a claim for duty-free admission as provided for under paragraph (c) of this section, the importer is deemed to certify, in accordance with General Note 6(a)(ii), HTSUS, that the imported merchandise is, as described in paragraph (a) or paragraph (b) of this section, a civil aircraft or has been imported for use in a civil aircraft and will be so used.</P> <P>(e) <E T="03">Documentation.</E> Each entry summary claiming duty-free admission for imported merchandise in accordance with paragraph (c) of this section must be supported by documentation to verify the claim for duty-free admission, including the written order or contract and other evidence that the merchandise entered qualifies under General Note 6, HTSUS, as a civil aircraft, aircraft engine, or ground flight simulator, or their parts, components, and subassemblies. Evidence that the merchandise qualifies under the general note includes evidence of compliance with paragraph (a)(1) of this section concerning use of the merchandise and evidence of compliance with the airworthiness certification requirement of paragraph (a)(2)(i), (a)(2)(ii), or (a)(2)(iii) of this section, including, as appropriate in the circumstances, an FAA certification; approval of airworthiness by an airworthiness authority in the country of export and evidence that the FAA recognizes that approval as an acceptable substitute for an FAA certification; an application for a certification submitted to and accepted by the FAA; a type and production certificate issued by the FAA; and/or evidence that a type and production certificate holder will submit an application for certification or approval in the future pending completion of design or other technical requirements stipulated by the FAA and of estimates of quantities of parts, components, and subassemblies as are required to meet design and technical requirements stipulated by the FAA. This documentation need not be filed with the entry summary but must be maintained in accordance with the general note and with the recordkeeping provisions of Part 163 of this chapter. Customs may request production of documentation at any time to verify the claim for duty-free admission. Failure to produce documentation sufficient to satisfy the port director that the merchandise qualifies for duty-free admission will result in a denial of duty-free treatment and may result in such other measures permitted under the regulations as the port director finds necessary to more closely monitor the importer's importations of merchandise claimed to be duty-free under this section. Proof of end use of the entered merchandise need not be maintained.</P> <P>(f) <E T="03">Post-entry claim.</E> An importer may file a claim for duty-free treatment under General Note 6, HTSUS, after filing an entry that made no such duty-free claim, by filing a written statement with Customs any time prior to liquidation of the entry or prior to the liquidation becoming final. When filed, the written statement constitutes the importer=s claim for duty-free treatment under the general note and its certification that the entered merchandise is a civil aircraft or has been imported for use in a civil aircraft and will be so used. In accordance with General Note 6, HTSUS, any refund resulting from a claim made under this paragraph will be without interest, notwithstanding the provision of 19 U.S.C. 1505(c).</P> <P>(g) <E T="03">Verification.</E> The port director will monitor and periodically audit selected entries made under this section.</P> <CITA>[T.D. 01-31, 67 FR 39289, June 7, 2002]</CITA> </SECTION> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Caribbean Basin Initiative</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Sections 10.191 through 10.197 issued by T.D. 84-237, 49 FR 47993, Dec. 7, 1984, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 10.191</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) <E T="03">Statutory authority.</E> Subtitle A, Title II, Pub. L. 98-67, entitled the Caribbean Basin Economic Recovery Act (19 U.S.C. 2701-2706) and referred to as the Caribbean Basin Initiative (CBI), authorizes the President to proclaim duty-free treatment for all eligible articles from any beneficiary country.<PRTPAGE P="159"/> </P> <P>(b) <E T="03">Definitions</E>—(1) <E T="03">Beneficiary country.</E> For purposes of § 10.191 through § 10.199 and except as otherwise provided in § 10.195(b), the term “beneficiary country” means any country or territory or successor political entity with respect to which there is in effect a proclamation by the President designating such country, territory or successor political entity as a beneficiary country in accordance with section 212(a)(1)(A) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2702(a)(1)(A)).</P> <P>(2) <E T="03">Eligible articles.</E> Except as provided herein, for purposes of § 10.191(a), the term “eligible articles” means any merchandise which is imported directly from a beneficiary country as provided in § 10.193 and which meets the country of origin criteria set forth in § 10.195 or in § 10.198b. The following merchandise shall not be considered eligible articles entitled to duty-free treatment under the CBI.</P> <P>(i) Textile and apparel articles which were not eligible articles for purposes of the CBI on January 1, 1994, as the CBI was in effect on that date.</P> <P>(ii) Footwear not designated on August 5, 1983, as eligible articles for the purpose of the Generalized System of Preferences under Title V, Trade Act of 1974, as amended (19 U.S.C. 2461 through 2467).</P> <P>(iii) Tuna, prepared or preserved in any manner, in airtight containers.</P> <P>(iv) Petroleum, or any product derived from petroleum, provided for in headings 2709 and 2710, Harmonized Tariff Schedule of the United States (HTSUS).</P> <P>(v) Watches and watch parts (including cases, bracelets and straps), of whatever type including, but not limited to, mechanical, quartz digital or quartz analog, if such watches or watch parts contain any material which is the product of any country with respect to which HTSUS column 2 rates of duty apply.</P> <P>(vi) Articles to which reduced rates of duty apply under § 10.198a.</P> <P>(vii) Sugars, sirups, and molasses, provided for in subheadings 1701.11.00 and 1701.12.00, HTSUS, to the extent that importation and duty-free treatment of such articles are limited by Additional U.S. Note 4, Chapter 17, HTSUS.</P> <P>(viii) Articles subject to the provisions of the subheadings of Subchapter III, from the beginning through 9903.85.21, Chapter 99, HTSUS, to the extent that such provisions have not been modified or terminated by the President pursuant to section 213(e)(5) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(e)(5)).</P> <P>(ix) Merchandise for which duty-free treatment under the CBI is suspended or withdrawn by the President pursuant to sections 213 (c)(2), (e)(1), or (f)(3) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703 (c)(2), (e)(1), or (f)(3)).</P> <P>(3) <E T="03">Wholly the growth, product, or manufacture of a beneficiary country.</E> For purposes of § 10.191 through § 10.199, the expression “wholly the growth, product, or manufacture of a beneficiary country” refers both to any article which has been entirely grown, produced, or manufactured in a beneficiary country or two or more beneficiary countries and to all materials incorporated in an article which have been entirely grown, produced, or manufactured in any beneficiary country or two or more beneficary countries, as distinguished from articles or materials imported into a beneficiary country from a non-beneficiary country whether or not such articles or materials were substantially transformed into new or different articles of commerce after their importation into the beneficiary country.</P> <P>(4) <E T="03">Entered.</E> For purposes of § 10.191 through § 10.199, the term “entered” means entered, or withdrawn from warehouse for consumption, in the customs territory of the U.S.</P> <CITA>[T.D. 84-237, 49 FR 47993, Dec. 7, 1984, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 00-68, 65 FR 59657, Oct. 5, 2000; T.D. 01-17, 66 FR 9645, Feb. 9, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.192</SECTNO> <SUBJECT>Claim for exemption from duty under the CBI.</SUBJECT> <P>A claim for an exemption from duty on the ground that the CBI applies shall be allowed by the port director only if he is satisfied that the requirements set forth in this section and § 10.193 through § 10.198b have been met. Duty-free treatment may be claimed at <PRTPAGE P="160"/>the time of filing the entry summary by placing the symbol “E” as a prefix to the HTSUS subheading number for each article for which such treatment is claimed on that document.</P> <CITA>[T.D. 84-237, 49 FR 47993, Dec. 7, 1984, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 94-47, 59 FR 25570, May 17, 1994; T.D. 00-68, 65 FR 59658, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.193</SECTNO> <SUBJECT>Imported directly.</SUBJECT> <P>To qualify for treatment under the CBI, an article shall be imported directly from a beneficiary country into the customs territory of the U.S. For purposes of § 10.191 through § 10.198b the words “imported directly” mean:</P> <P>(a) Direct shipment from any beneficiary country to the U.S. without passing through the territory of any non-beneficiary country; or</P> <P>(b) If the shipment is from any beneficiary country to the U.S. through the territory of any non-beneficiary country, the articles in the shipment do not enter into the commerce of any non-beneficiary country while en route to the U.S. and the invoices, bills of lading, and other shipping documents show the U.S. as the final destination; or</P> <P>(c) If the shipment is from any beneficiary country to the U.S. through the territory of any non-beneficiary country, and the invoices and other documents do not show the U.S. as the final destination, the articles in the shipment upon arrival in the U.S. are imported directly only if they:</P> <P>(1) Remained under the control of the customs authority of the intermediate country;</P> <P>(2) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commericial transaction between the importer and the producer or the latter's sales agent; and</P> <P>(3) Were not subjected to operations other than loading and unloading, and other activities necessary to preserve the articles in good condition.</P> <CITA>[T.D. 84-237, 49 FR 47993, Dec. 7, 1984, as amended by T.D. 00-68, 65 FR 59658, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.194</SECTNO> <SUBJECT>Evidence of direct shipment.</SUBJECT> <P>(a) <E T="03">Documents constituting evidence of direct shipment.</E> The port director may require that appropriate shipping papers, invoices, or other documents be submitted within 60 days of the date of entry as evidence that the articles were “imported directly”, as that term is defined in § 10.193. Any evidence of direct shipment required shall be subject to such verification as deemed necessary by the port director.</P> <P>(b) <E T="03">Waiver of evidence of direct shipment.</E> The port director may waive the submission of evidence of direct shipment when otherwise satisfied, taking into consideration the kind and value of the merchandise, that the merchandise was, in fact, imported directly and that it otherwise clearly qualifies for treatment under the CBI.</P> </SECTION> <SECTION> <SECTNO>§ 10.195</SECTNO> <SUBJECT>Country of origin criteria.</SUBJECT> <P>(a) <E T="03">Articles produced in a beneficiary country</E>—(1) <E T="03">General.</E> Except as provided herein, any article which is either wholly the growth, product, or manufacture of a beneficiary country or a new or different article of commerce which has been grown, produced, or manufactured in a beneficiary country, may qualify for duty-free entry under the CBI. No article or material shall be considered to have been grown, produced, or manufactured in a beneficiary country by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations, or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. Duty-free entry under the CBI may be accorded to an article only if the sum of the cost or value of the material produced in a beneficiary country or countries, plus the direct costs of processing operations performed in a beneficiary country or countries, is not less than 35 percent of the appraised value of the article at the time it is entered.</P> <P>(2) <E T="03">Combining, packaging, and diluting operations.</E> No article which has undergone only a simple combining or packaging operation or a mere dilution in a beneficiary country within the meaning of paragraph (a)(1) of this section shall be entitled to duty-free treatment <PRTPAGE P="161"/>even though the processing operation causes the article to meet the value requirement set forth in that paragraph.</P> <P>(i) For purposes of this section, simple combining or packaging operations and mere dilution include, but are not limited to, the following processes:</P> <P>(A) The addition of batteries to devices;</P> <P>(B) Fitting together a small number of components by bolting, glueing, soldering etc.;</P> <P>(C) Blending foreign and beneficiary country tobacco;</P> <P>(D) The addition of substances such as anticaking agents, preservatives, wetting agents, etc.;</P> <P>(E) Repacking or packaging components together;</P> <P>(F) Reconstituting orange juice by adding water to orange juice concentrate; and</P> <P>(G) Diluting chemicals with inert ingredients to bring them to standard degrees of strength.</P> <P>(ii) For purposes of this section, simple combining or packaging operations and mere dilution shall not be taken to include processes such as the following:</P> <P>(A) The assembly of a large number of discrete components onto a printed circuit board;</P> <P>(B) The mixing together of two bulk medicinal substances followed by the packaging of the mixed product into individual doses for retail sale;</P> <P>(C) The addition of water or another substance to a chemical compound under pressure which results in a reaction creating a new chemical compound; and</P> <P>(D) A simple combining or packaging operation or mere dilution coupled with any other type of processing such as testing or fabrication (<E T="03">e.g.,</E> a simple assembly of a small number of components, one of which was fabricated in the beneficiary country where the assembly took place).</P> <FP>The fact that an article or material has undergone more than a simple combining or packaging operation or mere dilution is not necessarily dispositive of the question of whether that processing constitutes a substantial transformation for purposes of determining the country of origin of the article or material.</FP> <P>(b) <E T="03">Commonwealth of Puerto Rico and U.S. Virgin Islands</E>—(1) <E T="03">General.</E> For purposes of determining the percentage referred to in paragraph (a) of this section, the term “beneficiary country” includes the Commonwealth of Puerto Rico and the U.S. Virgin Islands. Any cost or value of materials or direct costs of processing operations attributable to the U.S. Virgin Islands must be included in the article prior to its final exportation from a beneficiary country to the United States.</P> <P>(2) <E T="03">Manufacture in the Commonwealth of Puerto Rico after final exportation.</E> Notwithstanding the provisions of 19 U.S.C. 1311, if an article from a beneficiary country is entered under bond for processing or use in manufacturing in the Commonwealth of Puerto Rico, no duty will be imposed on the withdrawal from warehouse for consumption of the product of that processing or manufacturing provided that:</P> <P>(i) The article entered in the warehouse in the Commonwealth of Puerto Rico was grown, produced, or manufactured in a beneficiary country within the meaning of paragraph (a) of this section and was imported directly from a beneficiary country within the meaning of § 10.193; and</P> <P>(ii) At the time of its withdrawal from the warehouse, the product of the processing or manufacturing in the Commonwealth of Puerto Rico meets the 35 percent value-content requirement prescribed in paragraph (a) of this section.</P> <P>(c) <E T="03">Materials produced in the U.S.</E> For purposes of determining the percentage referred to in paragraph (a) of this section, an amount not to exceed 15 percent of the appraised value of the article at the time it is entered may be attributed to the cost or value of materials produced in the customs territory of the U.S. (other than the Commonwealth of Puerto Rico). In the case of materials produced in the customs territory of the U.S., the provisions of § 10.196 shall apply.</P> <P>(d) <E T="03">Textile components cut to shape in the U.S.</E> The percentage referred to in paragraph (c) of this section may be attributed in whole or in part to the cost or value of a textile component that is cut to shape (but not to length, width, or both) in the U.S. (including the <PRTPAGE P="162"/>Commonwealth of Puerto Rico) from foreign fabric and exported to a beneficiary country for assembly into an article that is then returned to the U.S. and entered, or withdrawn from warehouse, for consumption on or after July 1, 1996. For purposes of this paragraph, the terms “textile component” and “fabric” have reference only to goods covered by the definition of “textile or apparel product” set forth in § 102.21(b)(5) of this chapter.</P> <P>(e) <E T="03">Articles wholly grown, produced, or manufactured in a beneficiary country.</E> Any article which is wholly the growth, product, or manufacture of a beneficiary country, including articles produced or manufactured in a beneficiary country exclusively from materials which are wholly the growth, product, or manufacture of a beneficiary country or countries, shall normally be presumed to meet the requirements set forth in paragraph (a) of this section.</P> <P>(f) <E T="03">Country of origin marking.</E> The general country of origin marking requirements that apply to all importations are also applicable to articles imported under the CBI.</P> <CITA>[T.D. 84-237, 49 FR 47993, Dec. 7, 1984; 49 FR 49575, Dec. 20, 1984, as amended by T.D. 95-69, 60 FR 46197, Sept. 5, 1995; T.D. 95-69, 60 FR 55995, Nov. 6, 1996; T.D. 00-68, 65 FR 59658, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.196</SECTNO> <SUBJECT>Cost or value of materials produced in a beneficiary country or countries.</SUBJECT> <P>(a) <E T="03">“Materials produced in a beneficiary country or countries” defined.</E> For purposes of § 10.195, the words “materials produced in a beneficiary country or countries” refer to those materials incorporated in an article which are either:</P> <P>(1) Wholly the growth, product, or manufacture of a beneficiary country or two or more beneficiary countries; or</P> <P>(2) Subject to the limitations set forth in § 10.195(a), substantially transformed in any beneficiary country or two or more beneficiary countries into a new or different article of commerce which is then used in any beneficiary country in the production or manufacture of a new or different article which is imported directly into the U.S. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>A raw, perishable skin of an animal grown in one beneficiary country is sent to another beneficiary country where it is tanned to create nonperishable “crust leather”. The tanned product is then imported directly into the U.S. Because the material of which the imported article is composed is wholly the growth, product, or manufacture of one of more beneficiary countries, the entire cost or value of that material may be counted toward the 35 percent value requirement set forth in § 10.195.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>A raw, perishable skin of an animal grown in a non-beneficiary country is sent to a beneficiary country where it is tanned to create nonperishable “crust leather”. The tanned skin is then imported directly into the U.S. Although the tanned skin represents a new or different article of commerce produced in a beneficiary country within the meaning of § 10.195(a), the cost or value of the raw skin may not be counted toward the 35 percent value requirement because (1) the tanned material of which the imported article is composed is not wholly the growth, product, or manufacture of a beneficiary country and (2) the tanning operation creates the imported article itself rather than an intermediate article which is then used in the beneficiary country in the production or manufacture of an article imported into the U.S. The tanned skin would be eligible for duty-free treatment only if the direct costs attributable to the tanning operation represent at least 35 percent of the appraised value of the imported article.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 3.</HD> <P>A raw, perishable skin of an animal grown in a non-beneficiary country is sent to a beneficiary country where it is tanned to create nonperishable “crust leather”. The tanned material is then cut, sewn and assembled with a metal buckle imported from a non-beneficiary country to create a finished belt which is imported directly into the U.S. Because the operations performed in the beneficiary country involved both the substantial transformation of the raw skin into a new or different article and the use of that intermediate article in the production or manufacture of a new or different article imported into the U.S., the cost or value of the tanned material used to make the imported article may be counted toward the 35 percent value requirement. The cost or value of the metal buckle imported into the beneficiary country may not be counted toward the 35 percent value requirement because the buckle was not substantially transformed in the beneficiary country into a new or different article prior to its incorporation in the finished belt.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 4.</HD> <P>A raw, perishable skin of an animal grown in the U.S. Virgin Islands is sent to a beneficiary country where it is tanned to create nonperishable “crust leather”, which is then imported directly into the U.S. <PRTPAGE P="163"/>The tanned skin represents a new or different article of commerce produced in a beneficiary country within the meaning of § 10.195(a), and under § 10.195(b), the raw skin from which the tanned product was made is considered to have been grown in a beneficiary country for the purpose of applying the 35 percent value requirement. The tanned material of which the imported article is composed is considered to be wholly the growth, product, or manufacture of one or more beneficiary countries with the result that the entire cost or value of that material may be counted toward the 35 percent value requirement.</P> </EXAMPLE> <P>(b) <E T="03">Questionable origin.</E> When the origin of a material either is not ascertainable or is not satisfactorily demonstrated to the port director, the material shall not be considered to have been grown, produced, or manufactured in a beneficiary country.</P> <P>(c) <E T="03">Determination of cost or value of materials produced in a beneficiary country.</E> (1) The cost or value of materials produced in a beneficiary country or countries includes:</P> <P>(i) The manufacturer's actual cost for the materials;</P> <P>(ii) When not included in the manufacturer's actual cost for the materials, the freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant;</P> <P>(iii) The actual cost of waste or spoilage (material list), less the value of recoverable scrap; and</P> <P>(iv) Taxes and/or duties imposed on the materials by any beneficiary country, provided they are not remitted upon exportation.</P> <P>(2) Where a material is provided to the manufacturer without charge, or at less than fair market value, its cost or value shall be determined by computing the sum of:</P> <P>(i) All expenses incurred in the growth, production, or manufacture of the material, including general expenses;</P> <P>(ii) An amount for profit; and</P> <P>(iii) Freight, insurance, packing, and all other costs incurred in transporting the material to the manufacturer's plant.</P> <FP>If the pertinent information needed to compute the cost or value of a material is not available, the appraising officer may ascertain or estimate the value thereof using all reasonable ways and means at his disposal.</FP> </SECTION> <SECTION> <SECTNO>§ 10.197</SECTNO> <SUBJECT>Direct costs of processing operations performed in a beneficiary country or countries.</SUBJECT> <P>(a) <E T="03">Items included in the direct costs of processing operations.</E> As used in § 10.195 and § 10.198, the words “direct costs of processing operations” mean those costs either directly incurred in, or which can be reasonably allocated to, the growth, production, manufacture, or assembly of the specific merchandise under consideration. Such costs include, but are not limited to the following, to the extent that they are includable in the appraised value of the imported merchandise:</P> <P>(1) All actual labor costs involved in the growth, production, manufacture or assembly of the specific merchandise, including fringe benefits, on-the-job training, and the cost of engineering, supervisory, quality control, and similar personnel;</P> <P>(2) Dies, molds, tooling, and depreciation on machinery and equipment which are allocable to the specific merchandise;</P> <P>(3) Research, development, design, engineering, and blueprint costs insofar as they are allocable to the specific merchandise and;</P> <P>(4) Costs of inspecting and testing the specific merchandise.</P> <P>(b) <E T="03">Items not included in the direct costs of processing operations.</E> Those items which are not included within the meaning of the words “direct costs of processing operations” are those which are not directly attributable to the merchandise under consideration or are not “costs” of manufacturing the product. These include, but are not limited to:</P> <P>(1) Profit; and</P> <P>(2) General expenses of doing business which are either not allocable to the specific merchandise or are not related to the growth, production, manufacture, or assembly of the merchandise, such as administrative salaries, casualty and liability insurance, advertising, and salesmen's salaries, commissions, or expenses.</P> <CITA>[T.D. 84-237, 49 FR 47993, Dec. 7, 1984; 49 FR 49575, Dec. 20, 1984]</CITA> </SECTION> <SECTION> <PRTPAGE P="164"/> <SECTNO>§ 10.198</SECTNO> <SUBJECT>Evidence of country of origin.</SUBJECT> <P>(a) <E T="03">Shipments covered by a formal entry—</E>(1) <E T="03">Articles not wholly the growth, product, or manufacture of a beneficiary country</E>—(i) <E T="03">Declaration.</E> In a case involving an article covered by a formal entry which is not wholly the growth, product, or manufacture of a single beneficiary country, the exporter or other appropriate party having knowledge of the relevant facts in the beneficiary country where the article was produced or last processed shall be prepared to submit directly to the port director, upon request, a declaration setting forth all pertinent detailed information concerning the production or manufacture of the article. When requested by the port director, the declaration shall be prepared in substantially the following form:</P> <EXTRACT> <HD SOURCE="HD1">CBI Declaration</HD> <P>I. ______________,</P> <FP>(name), hereby declare that the articles described below (a) were produced or manufactured in ________ (country) by means of processing operations performed in that country as set forth below and were also subjected to processing operations in the other beneficiary country or countries (including the Commonwealth of Puerto Rico and the U.S. Virgin Islands) as set forth below and (b) incorporate materials produced in the country named above or in any other beneficiary country or countries (including the Commonwealth of Puerto Rico and the U.S. Virgin Islands) or in the customs territory of the United States (other than the Commonwealth of Puerto Rico) as set forth below:</FP> <GPOTABLE CDEF="s50,xls40,xls40,xls40,xls40,xls40" COLS="6" OPTS="L2,i1"> <BOXHD> <CHED H="1">Number and date of invoices</CHED> <CHED H="1">Description of articles and quantity</CHED> <CHED H="1">Processing operations performed on articles</CHED> <CHED H="2">Description of processing operations and country of processing</CHED> <CHED H="2">Direct costs of processing operations</CHED> <CHED H="1">Material produced in a beneficiary country or in the U.S.</CHED> <CHED H="2">Description of material, production process, and country of production</CHED> <CHED H="2">Cost or value of material</CHED> </BOXHD> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> </GPOTABLE> <FP SOURCE="FP-DASH">Date</FP> <FP SOURCE="FP-DASH">Address</FP> <FP SOURCE="FP-DASH">Signature</FP> <FP SOURCE="FP-DASH">Title</FP> </EXTRACT> <P>(ii) <E T="03">Retention of records and submission of declaration.</E> The information necessary for preparation of the declaration shall be retained in the files of the party responsible for its preparation and submission for a period of 5 years. In the event that the port director requests submission of the declaration during the 5-year period, it shall be submitted by the appropriate party directly to the port director within 60 days of the date of the request or such additional period as the port director may allow for good cause shown. Failure to submit the declaration in a timely fashion will result in a denial of duty-free treatment.</P> <P>(iii) <E T="03">Value added after final exportation.</E> In a case in which value is added to an article in a bonded warehouse or in a foreign-trade zone in the Commonwealth of Puerto Rico or in the U.S. after final exportation of the article from a beneficiary country, in order to ensure compliance with the value requirement under § 10.195(a), the declaration provided for in paragraph (a)(1)(i) of this section shall be filed by the importer or consignee with the entry summary as evidence of the country of origin. The declaration shall be properly completed by the party responsible for the addition of such value.</P> <P>(2) <E T="03">Merchandise wholly the growth, product, or manufacture of a beneficiary country.</E> In a case involving merchandise covered by a formal entry which is wholly the growth, product, or manufacture of a single beneficiary country, a statement to that effect shall be included on the commercial invoice provided to Customs.</P> <P>(b) <E T="03">Shipments covered by an informal entry.</E> Although the filing of the declaration provided for in paragraph <PRTPAGE P="165"/>(a)(1)(i) of this section will not be required for a shipment covered by an informal entry, the port director may require such other evidence of country of origin as deemed necessary.</P> <P>(c) <E T="03">Verification of documentation.</E> Any evidence of country of origin submitted under this section shall be subject to such verification as the port director deems necessary. In the event that the port director is prevented from obtaining the necessary verification, the port director may treat the entry as dutiable.</P> <CITA>[T.D. 94-47, 59 FR 25570, May 17, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.198a</SECTNO> <SUBJECT>Duty reduction for certain leather-related articles.</SUBJECT> <P>Except as otherwise provided in § 10.233, reduced rates of duty as proclaimed by the President will apply to handbags, luggage, flat goods, work gloves, and leather wearing apparel that were not designated on August 5, 1983, as eligible articles for purposes of the Generalized System of Preferences under Title V, Trade Act of 1974, as amended (19 U.S.C. 2461 through 2467), provided that the article in question at the time it is entered:</P> <P>(a) Was grown, produced, or manufactured in a beneficiary country within the meaning of § 10.195;</P> <P>(b) Meets the 35 percent value-content requirement prescribed in § 10.195; and</P> <P>(c) Was imported directly from a beneficiary country within the meaning of § 10.193.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.198b</SECTNO> <SUBJECT>Products of Puerto Rico processed in a beneficiary country.</SUBJECT> <P>Except in the case of any article described in § 10.191(b)(2)(i) through (vi), the duty-free treatment provided for under the CBI will apply to an article that is the growth, product, or manufacture of the Commonwealth of Puerto Rico and that is by any means advanced in value or improved in condition in a beneficiary country, provided that:</P> <P>(a) If any materials are added to the article in the beneficiary country, those materials consist only of materials that are a product of a beneficiary country or the United States; and</P> <P>(b) The article is imported directly from the beneficiary country into the customs territory of the United States within the meaning of § 10.193.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.199</SECTNO> <SUBJECT>Duty-free entry for certain beverages produced in Canada from Caribbean rum.</SUBJECT> <P>(a) <E T="03">General.</E> A spirituous beverage that is imported directly from the territory of Canada and that is classifiable under subheading 2208.40 or 2208.90, Harmonized Tariff Schedule of the United States (HTSUS), will be entitled, upon entry or withdrawal from warehouse for consumption, to duty-free treatment under section 213(a)(6) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(a)(6)), also known as the Caribbean Basin Initiative (CBI), if the spirituous beverage has been produced in the territory of Canada from rum, provided that the rum:</P> <P>(1) Is the growth, product, or manufacture either of a beneficiary country or of the U.S. Virgin Islands;</P> <P>(2) Was imported directly into the territory of Canada from a beneficiary country or from the U.S. Virgin Islands; and</P> <P>(3) Accounts for at least 90 percent of the alcoholic content by volume of the spirituous beverage.</P> <P>(b) <E T="03">Claim for exemption from duty under CBI.</E> A claim for an exemption from duty for a spirituous beverage under section 213(a)(6) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(a)(6)) may be made by entering such beverage under subheading 9817.22.05, HTSUS, on the entry summary document or its electronic equivalent. In order to claim the exemption, the importer must have the records described in paragraphs (d), (e), (f) and (g) of this section so that, upon Customs request, the importer can establish that:</P> <P>(1) The rum used to produce the beverage is the growth, product or manufacture either of a beneficiary country or of the U.S. Virgin Islands;</P> <P>(2) The rum was shipped directly from a beneficiary country or from the U.S. Virgin Islands to Canada;</P> <P>(3) The beverage was produced in Canada;<PRTPAGE P="166"/> </P> <P>(4) The rum accounts for at least 90% of the alcohol content of the beverage; and</P> <P>(5) The beverage was shipped directly from Canada to the United States.</P> <P>(c) <E T="03">Imported directly.</E> For a spirituous beverage imported from Canada to qualify for duty-free entry under the CBI, the spirituous beverage must be imported directly into the customs territory of the United States from Canada; and the rum used in its production must have been imported directly into the territory of Canada either from a beneficiary country or from the U.S. Virgin Islands.</P> <P>(1) “Imported directly” into the customs territory of the United States from Canada means:</P> <P>(i) Direct shipment from the territory of Canada to the U.S. without passing through the territory of any other country; or</P> <P>(ii) If the shipment is from the territory of Canada to the U.S. through the territory of any other country, the spirituous beverages do not enter into the commerce of any other country while en route to the U.S.; or</P> <P>(iii) If the shipment is from the territory of Canada to the U.S. through the territory of another country, and the invoices and other documents do not show the U.S. as the final destination, the spirituous beverages in the shipment are imported directly only if they:</P> <P>(A) Remained under the control of the customs authority of the intermediate country;</P> <P>(B) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the latter's sales agent; and</P> <P>(C) Were not subjected to operations other than loading and unloading, and other activities necessary to preserve the products in good condition.</P> <P>(2) “Imported directly” from a beneficiary country or from the U.S. Virgin Islands into the territory of Canada means:</P> <P>(i) Direct shipment from a beneficiary country or from the U.S. Virgin Islands into the territory of Canada without passing through the territory of any non-beneficiary country; or</P> <P>(ii) If the shipment is from a beneficiary country or from the U.S. Virgin Islands into the territory of Canada through the territory of any non-beneficiary country, the rum does not enter into the commerce of any non-beneficiary country while en route to Canada; or</P> <P>(iii) If the shipment is from a beneficiary country or from the U.S. Virgin Islands into the territory of Canada through the territory of any non-beneficiary country, the rum in the shipment is imported directly into the territory of Canada only if it:</P> <P>(A) Remained under the control of the customs authority of the intermediate country;</P> <P>(B) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail; and</P> <P>(C) Was not subjected to operations in the intermediate country other than loading and unloading, and other activities necessary to preserve the product in good condition.</P> <P>(d) <E T="03">Evidence of direct shipment</E>—(1) <E T="03">Spirituous beverages imported from Canada.</E> The importer must be prepared to provide to the port director, if requested, documentary evidence that the spirituous beverages were imported directly from the territory of Canada, as described in paragraph (c)(1) of this section. This evidence may include documents such as a bill of lading, invoice, air waybill, freight waybill, or cargo manifest. Any evidence of the direct shipment of these spirituous beverages from Canada into the U.S. may be subject to such verification as deemed necessary by the port director.</P> <P>(2) <E T="03">Rum imported into Canada from beneficiary country or U.S. Virgin Islands.</E> The importer must be prepared to provide to the port director, if requested, evidence that the rum used in producing the spirituous beverages was imported directly into the territory of Canada from a beneficiary country or from the U.S. Virgin Islands, as described in paragraph (c)(2) of this section. This evidence may include documents such as a Canadian customs entry, Canadian customs invoice, Canadian customs manifest, cargo manifest, <PRTPAGE P="167"/>bill of lading, landing certificate, airway bill, or freight waybill. Any evidence of the direct shipment of the rum from a beneficiary country or from the U.S. Virgin Islands into the territory of Canada for use there in producing the spirituous beverages may be subject to such verification as deemed necessary by the port director.</P> <P>(e) <E T="03">Origin of rum used in production of the spirituous beverage</E>—(1) <E T="03">Origin criteria.</E> In order for a spirituous beverage covered by this section to be entitled to duty-free entry under the CBI, the rum used in producing the spirituous beverage in the territory of Canada must be wholly the growth, product, or manufacture either of a beneficiary country under the CBI or of the U.S. Virgin Islands, or must constitute a new or different article of commerce that was produced or manufactured in a beneficiary country or in the U.S. Virgin Islands. Such rum will not be considered to have been grown, produced, or manufactured in a beneficiary country or in the U.S. Virgin Islands by virtue of having merely undergone blending, combining or packaging operations, or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the product.</P> <P>(2) <E T="03">Evidence of origin of rum</E>—(i) <E T="03">Declaration.</E> The importer must be prepared to submit directly to the port director, if requested, a declaration prepared and signed by the person who produced or manufactured the rum, affirming that the rum is the growth, product or manufacture of a beneficiary country or of the U.S. Virgin Islands. While no particular form is prescribed for the declaration, it must include all pertinent information concerning the processing operations by which the rum was produced or manufactured, the address of the producer or manufacturer, the title of the party signing the declaration, and the date it is signed.</P> <P>(ii) <E T="03">Records supporting declaration.</E> The supporting records, including those production records, that are necessary for the preparation of the declaration must also be available for submission to the port director if requested. The declaration and any supporting evidence as to the origin of the rum may be subject to such verification as deemed necessary by the port director.</P> <P>(f) <E T="03">Canadian processor declaration; supporting documentation.</E> (1) <E T="03">Canadian processor declaration.</E> The importer must be prepared to submit directly to the port director, if requested, a declaration prepared by the person who produced the spirituous beverage(s) in Canada, setting forth all pertinent information concerning the production of the beverages. The declaration will be in substantially the following form:</P> <P>I, ____ declare that the spirituous beverages here specified are the products that were produced by me (us), as described below, with the use of rum that was received by me (us); that the rum used in producing the beverages was received by me (us) on</P> <P>____ (date), from ____ (name and address of owner or exporter in the beneficiary country or in the U.S. Virgin Islands, as applicable); and that such rum accounts for at least 90 percent of the alcoholic content by volume, as shown below, of each spirituous beverage so produced.</P> <GPOTABLE CDEF="s10,r10,12" COLS="3" OPTS="L2,tp0,i1"> <BOXHD> <CHED H="1">Marks and numbers</CHED> <CHED H="1">Description of products and of processing</CHED> <CHED H="1">Alcoholic content of products; alcoholic content (%) attributable to rum <SU>1</SU> </CHED> </BOXHD> <ROW> <ENT I="01"/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> </ROW> <TNOTE> <SU>1</SU> The production records must establish, for each lot of beverage produced, the quantity of rum the growth, product or manufacture of a CBI beneficiary country or of the U.S. Virgin Islands under 19 U.S.C. 2703(a)(6) that is used in producing the finished beverage; the alcoholic content by volume of the finished beverage; and the alcoholic content by volume of the finished beverage, expressed as a percentage, that is attributable to the qualifying rum. If rum from two or more qualifying sources (<E T="03">e.g.,</E> rum the growth, product or manufacture of a CBI beneficiary country or of the U.S. Virgin Islands and other rum the growth, product or manufacture of another CBI country) are used in processing the beverage, the alcoholic content requirement may be met by aggregating the alcoholic content of the finished beverage that is attributable to rum from each of the qualifying sources used in processing the finished beverage, as reflected in the production records.</TNOTE> </GPOTABLE> <EXTRACT> <FP SOURCE="FP-DASH">Date</FP> <FP SOURCE="FP-DASH">Address</FP> <FP SOURCE="FP-DASH">Signature</FP> <FP SOURCE="FP-DASH">Title </FP> </EXTRACT> <P>(2) <E T="03">Availability of supporting documents.</E> The information, including any supporting documents and records, necessary for the preparation of the declaration, as described in paragraph (f)(1) of this section, must be available for submission to the port director, if <PRTPAGE P="168"/>requested. The declaration and any supporting evidence may be subject to such verification as deemed necessary by the port director. The specific documentary evidence necessary to support the declaration consists of those documents and records which satisfactorily establish:</P> <P>(i) The receipt of the rum by the Canadian processor, including the date of receipt and the name and address of the party from whom the rum was received (the owner or exporter in the beneficiary country or the U.S. Virgin Islands); and</P> <P>(ii) For each lot of beverage produced and included in the declaration, the specific identification of the production lot(s) involved; the quantity of qualifying rum that is used in producing the finished beverage, including a description of the processing and of the finished products; the alcoholic content by volume of the finished beverage; and the alcoholic content by volume of the finished beverage, expressed as a percentage, that is attributable to the qualifying rum.</P> <P>(g) <E T="03">Importer system for review of necessary recordkeeping.</E> The importer will establish and implement a system of internal controls which demonstrate that reasonable care was exercised in its claim for duty-free treatment under the CBI. These controls should include tests to assure the accuracy and availability of records that establish:</P> <P>(1) The origin of the rum;</P> <P>(2) The direct shipment of the rum from a beneficiary country or from the U.S. Virgin Islands to Canada;</P> <P>(3) The alcohol content of the finished beverage imported from Canada; and</P> <P>(4) The direct shipment of the finished beverage from Canada to the United States.</P> <P>(h) <E T="03">Submission of documents to Customs.</E> The importer must be prepared to submit directly to the port director, if requested, those documents and/or supporting records as described in paragraphs (d), (e) and (f) of this section, for a period of 5 years from the date of entry of the related spirituous beverages under section 213(a)(6) of the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(a)(6)), as provided in § 163.4(a) of this chapter. If requested, the importer must submit such documents and/or supporting records to the port director within 60 calendar days of the date of the request or such additional period as the port director may allow for good cause shown.</P> <CITA>[T.D. 02-59, 67 FR 62882, Oct. 9, 2002]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Andean Trade Preference</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Sections 10.201 through 10.208 appear at T.D. 98-76, 63 FR 51292, Sept. 25, 1998, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 10.201</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>Title II of Pub. L. 102-182 (105 Stat. 1233), entitled the Andean Trade Preference Act (ATPA) and codified at 19 U.S.C. 3201 through 3206, authorizes the President to proclaim duty-free treatment for all eligible articles from any beneficiary country and to designate countries as beneficiary countries. The provisions of §§ 10.202 through 10.207 set forth the legal requirements and procedures that apply for purposes of obtaining that duty-free treatment for certain articles from a beneficiary country which are identified for purposes of that treatment in General Note 11, Harmonized Tariff Schedule of the United States (HTSUS), and in the “Special” rate of duty column of the HTSUS. Provisions regarding preferential treatment of apparel and other textile articles under the ATPA are contained in §§ 10.241 through 10.248, and provisions regarding preferential treatment of tuna and certain other non-textile articles under the ATPA are contained in §§ 10.251 through 10.257.</P> <CITA>[T.D. 03-16, 68 FR 14486, Mar. 25, 2003; 68 FR 67338, Dec. 1, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.202</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>The following definitions apply for purposes of §§ 10.201 through 10.207:</P> <P>(a) <E T="03">Beneficiary country.</E> Except as otherwise provided in § 10.206(b), the term “beneficiary country” refers to any country or successor political entity with respect to which there is in effect a proclamation by the President designating such country or successor political entity as a beneficiary country in accordance with section 203 of the ATPA (19 U.S.C. 3202).<PRTPAGE P="169"/> </P> <P>(b) <E T="03">Eligible articles.</E> The term “eligible” when used with reference to an article means merchandise which is imported directly from a beneficiary country as provided in § 10.204, which meets the country of origin criteria set forth in § 10.205 and the value-content requirement set forth in § 10.206, and which, if the requirements of § 10.207 are met, is therefore entitled to duty-free treatment under the ATPA. However, the following merchandise shall not be considered eligible articles entitled to duty-free treatment under the ATPA:</P> <P>(1) Textiles and apparel articles which were not eligible articles for purposes of the ATPA on January 1, 1994, as the ATPA was in effect on that date, except as otherwise provided in §§ 10.241 through 10.248;</P> <P>(2) Rum and tafia classified in subheading 2208.40, Harmonized Tariff Schedule of the United States;</P> <P>(3) Sugars, syrups, and sugar-containing products subject to over-quota duty rates under applicable tariff-rate quotas; or</P> <P>(4) Tuna prepared or preserved in any manner in airtight containers, except as otherwise provided in §§ 10.251 through 10.257.</P> <P>(c) <E T="03">Entered.</E> The term “entered” means entered, or withdrawn from warehouse for consumption, in the customs territory of the United States.</P> <P>(d) <E T="03">Wholly the growth, product, or manufacture of a beneficiary country.</E> The expression “wholly the growth, product, or manufacture of a beneficiary country” has the same meaning as that set forth in § 10.191(b)(3) of this part.</P> <CITA>[T.D. 98-76, 63 FR 51292, Sept. 25, 1998, as amended by T.D. 03-16, 68 FR 14486, Mar. 25, 2003; 68 FR 67338, Dec. 1, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.203</SECTNO> <SUBJECT>Eligibility criteria in general.</SUBJECT> <P>An article classifiable under a subheading of the Harmonized Tariff Schedule of the United States for which a rate of duty of “Free” appears in the “Special” subcolumn followed by the symbol “J” or “J*” in parentheses is eligible for duty-free treatment, and will be accorded such treatment, if each of the following requirements is met:</P> <P>(a) <E T="03">Imported directly.</E> The article is imported directly from a beneficiary country as provided in § 10.204.</P> <P>(b) <E T="03">Country of origin criteria.</E> The article complies with the country of origin criteria set forth in § 10.205.</P> <P>(c) <E T="03">Value content requirement.</E> The article complies with the value content requirement set forth in § 10.206.</P> <P>(d) <E T="03">Filing of claim and submission of supporting documentation.</E> The claim for duty-free treatment is filed, and any required documentation in support of the claim is submitted, in accordance with the procedures set forth in § 10.207.</P> </SECTION> <SECTION> <SECTNO>§ 10.204</SECTNO> <SUBJECT>Imported directly.</SUBJECT> <P>In order to be eligible for duty-free treatment under the ATPA, an article shall be imported directly from a beneficiary country into the customs territory of the United States. For purposes of this requirement, the words “imported directly” mean:</P> <P>(a) Direct shipment from any beneficiary country to the United States without passing through the territory of any non-beneficiary country; or</P> <P>(b) If shipment from any beneficiary country to the United States was through the territory of a non-beneficiary country, the articles in the shipment did not enter into the commerce of the non-beneficiary country while en route to the United States, and the invoices, bills of lading, and other shipping documents show the United States as the final destination; or</P> <P>(c) If shipment from any beneficiary country to the United States was through the territory of a non-beneficiary country and the invoices and other documents do not show the United States as the final destination, then the articles in the shipment, upon arrival in the United States, are imported directly only if they:</P> <P>(1) Remained under the control of the customs authority in the intermediate country;</P> <P>(2) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the articles are imported into the United States as a result of the original commercial transaction between the importer and the producer or the latter's sales agent; and<PRTPAGE P="170"/> </P> <P>(3) Were not subjected to operations in the intermediate country other than loading and unloading, and other activities necessary to preserve the articles in good condition.</P> </SECTION> <SECTION> <SECTNO>§ 10.205</SECTNO> <SUBJECT>Country of origin criteria.</SUBJECT> <P>(a) <E T="03">General.</E> Except as otherwise provided in paragraph (b) of this section, an article may be eligible for duty-free treatment under the ATPA if the article is either:</P> <P>(1) Wholly the growth, product, or manufacture of a beneficiary country; or</P> <P>(2) A new or different article of commerce which has been grown, produced, or manufactured in a beneficiary country.</P> <P>(b) <E T="03">Exceptions.</E> No article shall be eligible for duty-free treatment under the ATPA by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations, or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. The principles and examples set forth in § 10.195(a)(2) of this part shall apply equally for purposes of this paragraph.</P> </SECTION> <SECTION> <SECTNO>§ 10.206</SECTNO> <SUBJECT>Value content requirement.</SUBJECT> <P>(a) <E T="03">General.</E> An article may be eligible for duty-free treatment under the ATPA only if the sum of the cost or value of the materials produced in a beneficiary country or countries, plus the direct costs of processing operations performed in a beneficiary country or countries, is not less than 35 percent of the appraised value of the article at the time it is entered.</P> <P>(b) <E T="03">Commonwealth of Puerto Rico, U.S. Virgin Islands and CBI beneficiary countries.</E> For purposes of determining the percentage referred to in paragraph (a) of this section, the term “beneficiary country” includes the Commonwealth of Puerto Rico, the U.S. Virgin Islands, and any CBI beneficiary country as defined in § 10.191(b)(1) of this part. Any cost or value of materials or direct costs of processing operations attributable to the Virgin Islands or any CBI beneficiary country must be included in the article prior to its final exportation to the United States from a beneficiary country as defined in § 10.202(a).</P> <P>(c) <E T="03">Materials produced in the United States.</E> For purposes of determining the percentage referred to in paragraph (a) of this section, an amount not to exceed 15 percent of the appraised value of the article at the time it is entered may be attributed to the cost or value of materials produced in the customs territory of the United States (other than the Commonwealth of Puerto Rico). The principles set forth in paragraph (d)(1) of this section shall apply in determining whether a material is “produced in the customs territory of the United States” for purposes of this paragraph.</P> <P>(d) <E T="03">Cost or value of materials</E>—(1) <E T="03">“Materials produced in a beneficiary country or countries” defined.</E> For purposes of paragraph (a) of this section, the words <E T="03">materials produced in a beneficiary country or countries</E> refer to those materials incorporated in an article which are either:</P> <P>(i) Wholly the growth, product, or manufacture of a beneficiary country or two or more beneficiary countries; or</P> <P>(ii) Substantially transformed in any beneficiary country or two or more beneficiary countries into a new or different article of commerce which is then used in any beneficiary country as defined in § 10.202(a) in the production or manufacture of a new or different article which is imported directly into the United States. For purposes of this paragraph (d)(1)(ii), no material shall be considered to be substantially transformed into a new or different article of commerce by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations, or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. The examples set forth in § 10.196(a) of this part, and the principles and examples set forth in § 10.195(a)(2) of this part, shall apply for purposes of the corresponding context under paragraph (d)(1) of this section.<PRTPAGE P="171"/> </P> <P>(2) <E T="03">Questionable origin.</E> When the origin of a material either is not ascertainable or is not satisfactorily demonstrated to the appropriate port director, the material shall not be considered to have been grown, produced, or manufactured in a beneficiary country or in the customs territory of the United States.</P> <P>(3) <E T="03">Determination of cost or value of materials.</E> (i) The cost or value of materials produced in a beneficiary country or countries or in the customs territory of the United States includes:</P> <P>(A) The manufacturer's actual cost for the materials;</P> <P>(B) When not included in the manufacturer's actual cost for the materials, the freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant;</P> <P>(C) The actual cost of waste or spoilage, less the value of recoverable scrap; and</P> <P>(D) Taxes and/or duties imposed on the materials by any beneficiary country or by the United States, provided they are not remitted upon exportation.</P> <P>(ii) Where a material is provided to the manufacturer without charge, or at less than fair market value, its cost or value shall be determined by computing the sum of:</P> <P>(A) All expenses incurred in the growth, production, or manufacture of the material, including general expenses;</P> <P>(B) An amount for profit; and</P> <P>(C) Freight, insurance, packing, and all other costs incurred in transporting the material to the manufacturer's plant.</P> <P>(iii) If the pertinent information needed to compute the cost or value of a material is not available, the appraising officer may ascertain or estimate the value thereof using all reasonable ways and means at his disposal.</P> <P>(e) <E T="03">Direct costs of processing operations</E>—(1) <E T="03">Items included.</E> For purposes of paragraph (a) of this section, the words <E T="03">direct costs of processing operations</E> mean those costs either directly incurred in, or which can be reasonably allocated to, the growth, production, manufacture, or assembly of the specific merchandise under consideration. Such costs include, but are not limited to the following, to the extent that they are includable in the appraised value of the imported merchandise:</P> <P>(i) All actual labor costs involved in the growth, production, manufacture, or assembly of the specific merchandise, including fringe benefits, on-the-job training, and the cost of engineering, supervisory, quality control, and similar personnel;</P> <P>(ii) Dies, molds, tooling, and depreciation on machinery and equipment which are allocable to the specific merchandise;</P> <P>(iii) Research, development, design, engineering, and blueprint costs insofar as they are allocable to the specific merchandise; and</P> <P>(iv) Costs of inspecting and testing the specific merchandise.</P> <P>(2) <E T="03">Items not included.</E> For purposes of paragraph (a) of this section, the words “direct costs of processing operations” do not include items which are not directly attributable to the merchandise under consideration or are not costs of manufacturing the product. These include, but are not limited to:</P> <P>(i) Profit; and</P> <P>(ii) General expenses of doing business which either are not allocable to the specific merchandise or are not related to the growth, production, manufacture, or assembly of the merchandise, such as administrative salaries, casualty and liability insurance, advertising, and salesmen's salaries, commissions, or expenses.</P> <P>(f) <E T="03">Articles wholly the growth, product, or manufacture of a beneficiary country.</E> Any article which is wholly the growth, product, or manufacture of a beneficiary country as defined in § 10.202(a), and any article produced or manufactured in a beneficiary country as defined in § 10.202(a) exclusively from materials which are wholly the growth, product, or manufacture of a beneficiary country or countries, shall normally be presumed to meet the requirement set forth in paragraph (a) of this section.</P> </SECTION> <SECTION> <PRTPAGE P="172"/> <SECTNO>§ 10.207</SECTNO> <SUBJECT>Procedures for filing duty-free treatment claim and submitting supporting documentation.</SUBJECT> <P>(a) <E T="03">Filing claim for duty-free treatment.</E> Except as provided in paragraph (c) of this section, a claim for duty-free treatment under the ATPA may be made at the time of filing the entry summary by placing the symbol “J” as a prefix to the Harmonized Tariff Schedule of the United States subheading number applicable to each article for which duty-free treatment is claimed on that document.</P> <P>(b) <E T="03">Shipments covered by a formal entry</E>—(1) <E T="03">Articles not wholly the growth, product, or manufacture of a beneficiary country</E>—(i) <E T="03">Declaration.</E> In a case involving an article covered by a formal entry for which duty-free treatment is claimed under the ATPA and which is not wholly the growth, product, or manufacture of a single beneficiary country as defined in § 10.202(a), the exporter or other appropriate party having knowledge of the relevant facts in the beneficiary country as defined in § 10.202(a) where the article was produced or last processed shall be prepared to submit directly to the port director, upon request, a declaration setting forth all pertinent detailed information concerning the production or manufacture of the article. When requested by the port director, the declaration shall be prepared in substantially the following form:</P> <EXTRACT> <HD SOURCE="HD3">ATPA DECLARATION</HD> <P>I, ______ (name), hereby declare that the articles described below (a) were produced or manufactured in ______</P> <FP SOURCE="FP-DASH">(country) by means of processing operations performed in that country as set forth below and were also subjected to processing operations in the other beneficiary country or countries (including the Commonwealth of Puerto Rico, the U.S. Virgin Islands, and any CBI beneficiary country) as set forth below and (b) incorporate materials produced in the country named above or in any other beneficiary country or countries (including the Commonwealth of Puerto Rico, the U.S. Virgin Islands, and any CBI beneficiary country) or in the customs territory of the United States (other than the Commonwealth of Puerto Rico) as set forth below:</FP> </EXTRACT> <GPOTABLE CDEF="s50,r50,r50,r50,r50,r50" COLS="6" OPTS="L2(,0),i1"> <BOXHD> <CHED H="1">Number and date of invoices</CHED> <CHED H="1">Description of articles and quantity</CHED> <CHED H="1">Processing operations performed on articles</CHED> <CHED H="2">Description of processing operations and country of processing</CHED> <CHED H="2">Direct costs of processing operations</CHED> <CHED H="1">Material produced in a beneficiary country or in the U.S.</CHED> <CHED H="2">Description of material, production process, and country of production</CHED> <CHED H="2">Cost or value of material</CHED> </BOXHD> <ROW> <ENT I="22"/> </ROW> </GPOTABLE> <EXTRACT> <FP SOURCE="FP-DASH">Date</FP> <FP SOURCE="FP-DASH">Address</FP> <FP SOURCE="FP-DASH">Signature</FP> <FP SOURCE="FP-DASH">Title</FP> </EXTRACT> <P>(ii) <E T="03">Retention of records and submission of declaration.</E> The information necessary for the preparation of the declaration shall be retained in the files of the party responsible for its preparation and submission for a period of 5 years. In the event that the port director requests submission of the declaration during the 5-year period, it shall be submitted by the appropriate party directly to the port director within 60 days of the date of the request or such additional period as the port director may allow for good cause shown. Failure to submit the declaration in a timely fashion will result in a denial of duty-free treatment.</P> <P>(iii) <E T="03">Value added after final exportation.</E> In a case in which value is added to an article in the Commonwealth of Puerto Rico or in the United States after final exportation of the article from a beneficiary country as defined in § 10.202(a), in order to ensure compliance with the value requirement under § 10.206(a), the declaration provided for in paragraph (b)(1)(i) of this section shall be filed by the importer or consignee with the entry summary. The declaration shall be completed by the party responsible for the addition of such value.</P> <P>(2) <E T="03">Articles wholly the growth, product, or manufacture of a beneficiary country.</E> In a case involving an article covered by a formal entry for which duty-free treatment is claimed under the ATPA <PRTPAGE P="173"/>and which is wholly the growth, product, or manufacture of a single beneficiary country as defined in § 10.202(a), a statement to that effect shall be included on the commercial invoice provided to Customs.</P> <P>(c) <E T="03">Shipments covered by an informal entry.</E> The normal procedure for filing a claim for duty-free treatment as set forth in paragraph (a) of this section need not be followed, and the filing of the declaration provided for in paragraph (b)(1)(i) of this section will not be required, in a case involving a shipment covered by an informal entry. However, the port director may require submission of such other evidence of entitlement to duty-free treatment as deemed necessary.</P> <P>(d) <E T="03">Evidence of direct importation</E>—(1) <E T="03">Submission.</E> The port director may require that appropriate shipping papers, invoices, or other documents be submitted within 60 days of the date of entry as evidence that the articles were “imported directly”, as that term is defined in § 10.204.</P> <P>(2) <E T="03">Waiver.</E> The port director may waive the submission of evidence of direct importation when otherwise satisfied, taking into consideration the kind and value of the merchandise, that the merchandise was, in fact, imported directly and that it otherwise clearly qualifies for duty-free treatment under the ATPA.</P> <P>(e) <E T="03">Verification of documentation.</E> The documentation submitted under this section to demonstrate compliance with the requirements for duty-free treatment under the ATPA shall be subject to such verification as the port director deems necessary. In the event that the port director is prevented from obtaining the necessary verification, the port director may treat the entry as fully dutiable.</P> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Textile and Apparel Articles Under the African Growth and Opportunity Act</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>T.D. 00-67, 65 FR 59676, Oct. 5, 2000, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 10.211</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>Title I of Public Law 106-200 (114 Stat. 251), entitled the African Growth and Opportunity Act (AGOA), authorizes the President to extend certain trade benefits to designated countries in sub-Saharan Africa. Section 112 of the AGOA, codified at 19 U.S.C. 3721, provides for the preferential treatment of certain textile and apparel articles from beneficiary countries. The provisions of §§ 10.211-10.217 of this part set forth the legal requirements and procedures that apply for purposes of obtaining preferential treatment pursuant to section 112.</P> </SECTION> <SECTION> <SECTNO>§ 10.212</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>When used in §§ 10.211 through 10.217, the following terms have the meanings indicated:</P> <P> <E T="03">Apparel articles.</E> “Apparel articles” means goods classifiable in Chapters 61 and 62 and headings 6501, 6502, 6503, and 6504 and subheadings 6406.99 and 6505.90 of the HTSUS.</P> <P> <E T="03">Assembled in one or more beneficiary countries.</E> “Assembled in one or more beneficiary countries” when used in the context of a textile or apparel article has reference to a joining together of two or more components that occurred in one or more beneficiary countries, whether or not a prior joining operation was performed on the article or any of its components in the United States.</P> <P> <E T="03">Beneficiary country.</E> “Beneficiary country” means a country listed in section 107 of the African Growth and Opportunity Act (19 U.S.C. 3706) which has been the subject of a finding by the President or his designee, published in the <E T="04">Federal Register,</E> that the country has satisfied the requirements of section 113 of the African Growth and Opportunity Act (19 U.S.C. 3722) and which the President has designated as a beneficiary sub-Saharan African country under section 506A of the Trade Act of 1974 (19 U.S.C. 2466a).</P> <P> <E T="03">Cut in one or more beneficiary countries.</E> “Cut in one or more beneficiary countries” when used with reference to apparel articles means that all fabric components used in the assembly of the article were cut from fabric in one or more beneficiary countries.</P> <P> <E T="03">Foreign.</E> “Foreign” means of a country other than the United States or a beneficiary country.<PRTPAGE P="174"/> </P> <P> <E T="03">HTSUS.</E> “HTSUS” means the Harmonized Tariff Schedule of the United States.</P> <P> <E T="03">Knit-to-shape articles.</E> “Knit-to-shape,” when used with reference to sweaters or other apparel articles, means any apparel article of which 50 percent or more of the exterior surface area is formed by major parts that have been knitted or crocheted directly to the shape used in the apparel article, with no consideration being given to patch pockets, appliques, or the like. Minor cutting, trimming, or sewing of those major parts will not affect the determination of whether an apparel article is “knit-to-shape.”</P> <P> <E T="03">Knit-to-shape components.</E> “Knit-to-shape,” when used with reference to textile components, means components that are knitted or crocheted from a yarn directly to a specific shape containing a self-start edge. Minor cutting or trimming will not affect the determination of whether a component is “knit-to-shape.”</P> <P> <E T="03">Major parts.</E> “Major parts” means integral components of an apparel article but does not include collars, cuffs, waistbands, plackets, pockets, linings, paddings, trim, accessories, or similar parts or components.</P> <P> <E T="03">NAFTA.</E> “NAFTA” means the North American Free Trade Agreement entered into by the United States, Canada, and Mexico on December 17, 1992.</P> <P> <E T="03">Originating.</E> “Originating” means having the country of origin determined by application of the provisions of § 102.21 of this chapter.</P> <P> <E T="03">Preferential treatment.</E> “Preferential treatment” means entry, or withdrawal from warehouse for consumption, in the customs territory of the United States free of duty and free of any quantitative limitations as provided in 19 U.S.C. 3721.</P> <P> <E T="03">Wholly assembled in.</E> When used with reference to a textile or apparel article in the context of one or more beneficiary countries or one or more lesser developed beneficiary countries, the expression “wholly assembled in” means that all of the components of the textile or apparel article (including thread, decorative embellishments, buttons, zippers, or similar components) were joined together in one or more beneficiary countries or one or more lesser developed beneficiary countries.</P> <P> <E T="03">Wholly formed fabrics.</E> “Wholly formed,” when used with reference to fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile strips, yarns, twine, cordage, rope, or strips of fabric and ending with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took place in the United States or in one or more beneficiary countries.</P> <P> <E T="03">Wholly formed on seamless knitting machines.</E> “Wholly formed on seamless knitting machines,” when used to describe apparel articles, has reference to a process that created a knit-to-shape apparel article by feeding yarn(s) into a knitting machine to result in that article. When taken from the knitting machine, an apparel article created by this process either is in its final form or requires only minor cutting or trimming or the addition of minor components or parts such as patch pockets, appliques, capping, or elastic strip.</P> <P> <E T="03">Wholly formed yarns.</E> “Wholly formed,” when used with reference to yarns, means that all of the production processes, starting with the extrusion of filament, strip, film, or sheet and including slitting a film or sheet into strip, or the spinning of all fibers into yarn, or both, and ending with a yarn or plied yarn, took place in a single country.</P> <CITA>[T.D. 00-67, 65 FR 59676, Oct. 5, 2000; 65 FR 67260, Nov. 9, 2000, as amended by T.D. 03-15, 68 FR 13824, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.213</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <P>(a) <E T="03">General.</E> The preferential treatment referred to in § 10.211 applies to the following textile and apparel articles that are imported directly into the customs territory of the United States from a beneficiary country:</P> <P>(1) Apparel articles sewn or otherwise assembled in one or more beneficiary countries from fabrics wholly formed and cut, or from components knit-to-shape, in the United States, from yarns wholly formed in the United States, (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are wholly formed and cut <PRTPAGE P="175"/>in the United States) that are entered under subheading 9802.00.80 of the HTSUS;</P> <P>(2) Apparel articles sewn or otherwise assembled in one or more beneficiary countries from fabrics wholly formed and cut, or from components knit-to-shape, in the United States, from yarns wholly formed in the United States, (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are wholly formed and cut in the United States) that are entered under Chapter 61 or 62 of the HTSUS, if, after that assembly, the articles would have qualified for entry under subheading 9802.00.80 of the HTSUS but for the fact that the articles were embroidered or subjected to stone-washing, enzyme-washing, acid washing, perma-pressing, oven-baking, bleaching, garment-dyeing, screen printing, or other similar processes in a beneficiary country;</P> <P>(3) Apparel articles sewn or otherwise assembled in one or more beneficiary countries with thread formed in the United States from fabrics wholly formed in the United States and cut in one or more beneficiary countries from yarns wholly formed in the United States, or from components knit-to-shape in the United States from yarns wholly formed in the United States, or both (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are wholly formed in the United States).</P> <P>(4) Apparel articles wholly assembled in one or more beneficiary countries from fabric wholly formed in one or more beneficiary countries from yarns originating either in the United States or one or more beneficiary countries (including fabrics not formed from yarns, if those fabrics are classified under heading 5602 or 5603 of the HTSUS and are wholly formed in one or more beneficiary countries), or from components knit-to-shape in one or more beneficiary countries from yarns originating either in the United States or in one or more beneficiary countries, or apparel articles wholly formed on seamless knitting machines in a beneficiary country from yarns originating either in the United States or in one or more beneficiary countries, subject to the applicable quantitative limit published in the <E T="04">Federal Register</E> pursuant to U.S. Note 2, Subchapter XIX, Chapter 98, HTSUS;</P> <P>(5) Apparel articles wholly assembled, or knit-to-shape and wholly assembled, or both, in one or more lesser developed beneficiary countries regardless of the country of origin of the fabric or the yarn used to make the articles, subject to the applicable quantitative limit published in the <E T="04">Federal Register</E> pursuant to U.S. Note 2, Subchapter XIX, Chapter 98, HTSUS;</P> <P>(6) Sweaters, in chief weight of cashmere, knit-to-shape in one or more beneficiary countries and classifiable under subheading 6110.10 of the HTSUS;</P> <P>(7) Sweaters, containing 50 percent or more by weight of wool measuring 21.5 microns in diameter or finer, knit-to-shape in one or more beneficiary countries;</P> <P>(8) Apparel articles, other than brassieres classifiable under subheading 6212.10, HTSUS, that are both cut (or knit-to-shape) and sewn or otherwise assembled in one or more beneficiary countries, from fabrics or yarn that is not formed in the United States or a beneficiary country, provided that apparel articles of those fabrics or yarn would be considered an originating good under General Note 12(t), HTSUS, if the apparel articles had been imported directly from Canada or Mexico;</P> <P>(9) Apparel articles that are both cut (or knit-to-shape) and sewn or otherwise assembled in one or more beneficiary countries from fabrics or yarn that the President or his designee has designated in the <E T="04">Federal Register</E> as not available in commercial quantities in the United States;</P> <P>(10) A handloomed, handmade, or folklore article of a beneficiary country or countries that is certified as a handloomed, handmade, or folklore article by the competent authority of the beneficiary country or countries, provided that the President or his designee has determined that the article in question will be treated as being a handloomed, handmade, or folklore article.<PRTPAGE P="176"/> </P> <P>(11) Apparel articles sewn or otherwise assembled in one or more beneficiary countries with thread formed in the United States:</P> <P>(i) From components cut in the United States and in one or more beneficiary countries from fabric wholly formed in the United States from yarns wholly formed in the United States (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS);</P> <P>(ii) From components knit-to-shape in the United States and one or more beneficiary countries from yarns wholly formed in the United States; or</P> <P>(iii) From any combination of two or more of the cutting or knitting-to-shape operations described in paragraph (a)(11)(i) or paragraph (a)(11)(ii) of this section.</P> <P>(b) <E T="03">Special rules for certain component materials</E>—(1) <E T="03">General.</E> An article otherwise described under paragraph (a) of this section will not be ineligible for the preferential treatment referred to in § 10.211 because the article contains:</P> <P>(i) Findings and trimmings of foreign origin, if the value of those findings and trimmings does not exceed 25 percent of the cost of the components of the assembled article. For purposes of this section “findings and trimmings” include, but are not limited to, hooks and eyes, snaps, buttons, “bow buds,” decorative lace trim, elastic strips (but only if they are each less than 1 inch in width and are used in the production of brassieres), zippers (including zipper tapes), labels, and sewing thread except in the case of an article described in paragraph (a)(3) of this section;</P> <P>(ii) Interlinings of foreign origin, if the value of those interlinings does not exceed 25 percent of the cost of the components of the assembled article. For purposes of this section “interlinings” include only a chest type plate, a “hymo” piece, or “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made filaments;</P> <P>(iii) Any combination of findings and trimmings of foreign origin and interlinings of foreign origin, if the total value of those findings and trimmings and interlinings does not exceed 25 percent of the cost of the components of the assembled article; or</P> <P>(iv) Fibers or yarns not wholly formed in the United States or one or more beneficiary countries if the total weight of all those fibers and yarns is not more than 7 percent of the total weight of the article.</P> <P>(2) <E T="03">“Cost”and “value” defined.</E> The “cost” of components and the “value” of findings and trimmings or interlinings referred to in paragraph (b)(1) of this section means:</P> <P>(i) The price of the components, findings and trimmings, or interlinings when last purchased, f.o.b. port of exportation, as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(A) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price; or</P> <P>(B) If no exportation to a beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the freight, insurance, packing and other costs incurred in transporting the components, findings and trimmings, or interlinings to the place of production if included in that price; or</P> <P>(ii) If the price cannot be determined under paragraph (b)(2)(i) of this section or if Customs finds that price to be unreasonable, all reasonable expenses incurred in the growth, production, manufacture, or other processing of the components, findings and trimmings, or interlinings, including the cost or value of materials and general expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the components, findings and trimmings, or interlinings to the port of exportation.</P> <P>(3) <E T="03">Treatment of fibers and yarns as findings or trimmings.</E> If any fibers or yarns not wholly formed in the United States or one or more beneficiary countries are used in an article as a finding or trimming described in paragraph (b)(1)(i) of this section, the fibers or yarns will be considered to be a finding or trimming for purposes of paragraph (b)(1) of this section.</P> <P>(c) <E T="03">Imported directly defined.</E> For purposes of paragraph (a) of this section, the words “imported directly” mean:<PRTPAGE P="177"/> </P> <P>(1) Direct shipment from any beneficiary country to the United States without passing through the territory of any non-beneficiary country;</P> <P>(2) If the shipment is from any beneficiary country to the United States through the territory of any non-beneficiary country, the articles in the shipment do not enter into the commerce of any non-beneficiary country while en route to the United States and the invoices, bills of lading, and other shipping documents show the United States as the final destination; or</P> <P>(3) If the shipment is from any beneficiary country to the United States through the territory of any non-beneficiary country, and the invoices and other documents do not show the United States as the final destination, the articles in the shipment upon arrival in the United States are imported directly only if they:</P> <P>(i) Remained under the control of the customs authority of the intermediate country;</P> <P>(ii) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the producer's sales agent; and</P> <P>(iii) Were not subjected to operations other than loading or unloading, and other activities necessary to preserve the articles in good condition.</P> <CITA>[T.D. 00-67, 65 FR 59676, Oct. 5, 2000; 65 FR 67260, Nov. 9, 2000, as amended by T.D. 03-15, 68 FR 13824, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.214</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <P>(a) <E T="03">General.</E> A Certificate of Origin must be employed to certify that a textile or apparel article being exported from a beneficiary country to the United States qualifies for the preferential treatment referred to in § 10.211. The Certificate of Origin must be prepared by the exporter in the beneficiary country in the form specified in paragraph (b) of this section. Where the beneficiary country exporter is not the producer of the article, that exporter may complete and sign a Certificate of Origin on the basis of:</P> <P>(1) Its reasonable reliance on the producer's written representation that the article qualifies for preferential treatment; or</P> <P>(2) A completed and signed Certificate of Origin for the article voluntarily provided to the exporter by the producer.</P> <P>(b) <E T="03">Form of Certificate.</E> The Certificate of Origin referred to in paragraph (a) of this section must be in the following format:</P> <GPH DEEP="437" SPAN="2"> <PRTPAGE P="178"/> <GID>ER21MR03.001</GID> </GPH> <P>(c) <E T="03">Preparation of Certificate.</E> The following rules will apply for purposes of completing the Certificate of Origin set forth in paragraph (b) of this section:</P> <P>(1) Blocks 1 through 5 pertain only to the final article exported to the United States for which preferential treatment may be claimed;</P> <P>(2) Block 1 should state the legal name and address (including country) of the exporter;</P> <P>(3) Block 2 should state the legal name and address (including country) <PRTPAGE P="179"/>of the producer. If there is more than one producer, attach a list stating the legal name and address (including country) of all additional producers. If this information is confidential, it is acceptable to state “available to Customs upon request” in block 2. If the producer and the exporter are the same, state “same” in block 2;</P> <P>(4) Block 3 should state the legal name and address (including country) of the importer;</P> <P>(5) In block 4, insert the number and/or letter that identifies the preference group which applies to the article according to the description contained in the CFR provision cited on the Certificate for that group;</P> <P>(6) Block 5 should provide a full description of each article. The description should be sufficient to relate it to the invoice description and to the description of the article in the international Harmonized System. Include the invoice number as shown on the commercial invoice or, if the invoice number is not known, include another unique reference number such as the shipping order number;</P> <P>(7) Blocks 6 through 10 must be completed only when the block in question calls for information that is relevant to the preference group identified in block 4;</P> <P>(8) Block 6 should state the legal name and address (including country) of the fabric producer;</P> <P>(9) Block 7 should state the legal name and address (including country) of the yarn producer;</P> <P>(10) Block 8 should state the legal name and address (including country) of the thread producer;</P> <P>(11) Block 9 should state the name of the folklore article or should state that the article is handloomed or handmade;</P> <P>(12) Block 10 should be completed only when the preference group identifier “8” and/or “H” is inserted in block 4 and should state the name of the fabric or yarn that is in short supply in the NAFTA or that has been designated as not available in commercial quantities in the United States;</P> <P>(13) Block 11 must contain the signature of the exporter or of the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(14) Block 15 should reflect the date on which the Certificate was completed and signed;</P> <P>(15) Block 16 should be completed if the Certificate is intended to cover multiple shipments of identical articles as described in block 5 that are imported into the United States during a specified period of up to one year (see § 10.216(b)(4)(ii)). The “from” date is the date on which the Certificate became applicable to the article covered by the blanket Certificate (this date may be prior to the date reflected in block 15). The “to” date is the date on which the blanket period expires;</P> <P>(16) The telephone and facsimile numbers included in block 17 should be those at which the person who signed the Certificate may be contacted; and</P> <P>(17) The Certificate may be printed and reproduced locally. If more space is needed to complete the Certificate, attach a continuation sheet.</P> <CITA>[T.D. 00-67, 65 FR 59676, Oct. 5, 2000, as amended by T.D. 03-15, 68 FR 13825, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.215</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <P>(a) <E T="03">Declaration.</E> In connection with a claim for preferential treatment for a textile or apparel article described in § 10.213, the importer must make a written declaration that the article qualifies for that treatment. The inclusion on the entry summary, or equivalent documentation, of the subheading within Chapter 98 of the HTSUS under which the article is classified will constitute the written declaration. Except in any of the circumstances described in § 10.216(d)(1), the declaration required under this paragraph must be based on an original Certificate of Origin that has been completed and properly executed in accordance with § 10.214, that covers the article being imported, and that is in the possession of the importer.</P> <P>(b) <E T="03">Corrected declaration.</E> If, after making the declaration required under paragraph (a) of this section, the importer has reason to believe that a Certificate of Origin on which a declaration was based contains information that is not correct, the importer must within 30 calendar days after the date <PRTPAGE P="180"/>of discovery of the error make a corrected declaration and pay any duties that may be due. A corrected declaration will be effected by submission of a letter or other written statement to the Customs port where the declaration was originally filed.</P> <CITA>[T.D. 00-67, 65 FR 59676, Oct. 5, 2000, as amended by T.D. 03-15, 68 FR 13827, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.216</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <P>(a) <E T="03">Maintenance of records.</E> Each importer claiming preferential treatment for an article under § 10.215 must maintain in the United States, in accordance with the provisions of part 163 of this chapter, all records relating to the importation of the article. Those records must include the original Certificate of Origin referred to in § 10.215(a) and any other relevant documents or other records as specified in § 163.1(a) of this chapter.</P> <P>(b) <E T="03">Submission of Certificate.</E> An importer who claims preferential treatment on a textile or apparel article under § 10.215(a) must provide, at the request of the port director, a copy of the Certificate of Origin pertaining to the article. A Certificate of Origin submitted to Customs under this paragraph:</P> <P>(1) Must be in writing or must be transmitted electronically pursuant to any electronic data interchange system authorized by Customs for that purpose;</P> <P>(2) Must be signed by the exporter or by the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(3) Must be completed either in the English language or in the language of the country from which the article is exported. If the Certificate is completed in a language other than English, the importer must provide to Customs upon request a written English translation of the Certificate; and</P> <P>(4) May be applicable to:</P> <P>(i) A single importation of an article into the United States, including a single shipment that results in the filing of one or more entries and a series of shipments that results in the filing of one entry; or</P> <P>(ii) Multiple importations of identical articles into the United States that occur within a specified blanket period, not to exceed 12 months, set out in the Certificate by the exporter. For purposes of this paragraph and § 10.214(c)(15), “identical articles” means articles that are the same in all material respects, including physical characteristics, quality, and reputation.</P> <P>(c) <E T="03">Correction and nonacceptance of Certificate.</E> If the port director determines that a Certificate of Origin is illegible or defective or has not been completed in accordance with paragraph (b) of this section, the importer will be given a period of not less than five working days to submit a corrected Certificate. A Certificate will not be accepted in connection with subsequent importations during a period referred to in paragraph (b)(4)(ii) of this section if the port director determined that a previously imported identical article covered by the Certificate did not qualify for preferential treatment.</P> <P>(d) <E T="03">Certificate not required—</E>(1) <E T="03">General.</E> Except as otherwise provided in paragraph (d)(2) of this section, an importer is not required to have a Certificate of Origin in his possession for:</P> <P>(i) An importation of an article for which the port director has in writing waived the requirement for a Certificate of Origin because the port director is otherwise satisfied that the article qualifies for preferential treatment;</P> <P>(ii) A non-commercial importation of an article; or</P> <P>(iii) A commercial importation of an article whose value does not exceed US$2,500, provided that, unless waived by the port director, the producer, exporter, importer or authorized agent includes on, or attaches to, the invoice or other document accompanying the shipment the following signed statement: </P> <EXTRACT> <P>I hereby certify that the article covered by this shipment qualifies for preferential treatment under the AGOA. </P> <FP SOURCE="FP-2">Check One:</FP> <FP SOURCE="FP1-2">()Producer</FP> <FP SOURCE="FP1-2">()Exporter</FP> <FP SOURCE="FP1-2">()Importer</FP> <FP SOURCE="FP1-2">()Agent</FP> <PRTPAGE P="181"/> <FP SOURCE="FP-DASH"/> <FP>Name</FP> <FP SOURCE="FP-DASH"/> <FP>Title</FP> <FP SOURCE="FP-DASH"/> <FP>Address</FP> <FP SOURCE="FP-DASH"/> <FP>Signature and Date</FP> </EXTRACT> <P>(2) <E T="03">Exception.</E> If the port director determines that an importation described in paragraph (d)(1) of this section forms part of a series of importations that may reasonably be considered to have been undertaken or arranged for the purpose of avoiding a Certificate of Origin requirement under §§ 10.214 through 10.216, the port director will notify the importer in writing that for that importation the importer must have in his possession a valid Certificate of Origin to support the claim for preferential treatment. The importer will have 30 calendar days from the date of the written notice to obtain a valid Certificate of Origin, and a failure to timely obtain the Certificate of Origin will result in denial of the claim for preferential treatment. For purposes of this paragraph, a “series of importations” means two or more entries covering articles arriving on the same day from the same exporter and consigned to the same person.</P> <CITA>[T.D. 00-67, 65 FR 59676, Oct. 5, 2000, as amended by T.D. 03-15, 68 FR 13827, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.217</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> <P>(a) <E T="03">Verification by Customs.</E> A claim for preferential treatment made under § 10.215, including any statements or other information contained on a Certificate of Origin submitted to Customs under § 10.216, will be subject to whatever verification the port director deems necessary. In the event that the port director for any reason is prevented from verifying the claim, the port director may deny the claim for preferential treatment. A verification of a claim for preferential treatment may involve, but need not be limited to, a review of:</P> <P>(1) All records required to be made, kept, and made available to Customs by the importer or any other person under part 163 of this chapter;</P> <P>(2) Documentation and other information regarding the country of origin of an article and its constituent materials, including, but not limited to, production records, information relating to the place of production, the number and identification of the types of machinery used in production, and the number of workers employed in production; and</P> <P>(3) Evidence to document the use of U.S. materials in the production of the article in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents.</P> <P>(b) <E T="03">Importer requirements.</E> In order to make a claim for preferential treatment under § 10.215, the importer:</P> <P>(1) Must have records that explain how the importer came to the conclusion that the textile or apparel article qualifies for preferential treatment. Those records must include documents that support a claim that the article in question qualifies for preferential treatment because it is specifically described in one of the provisions under § 10.213(a). If the importer is claiming that the article incorporates fabric or yarn that originated or was wholly formed in the United States, the importer must have records that identify the U.S. producer of the fabric or yarn. A properly completed Certificate of Origin in the form set forth in § 10.214(b) is a record that would serve these purposes;</P> <P>(2) Must establish and implement internal controls which provide for the periodic review of the accuracy of the Certificate of Origin or other records referred to in paragraph (b)(1) of this section;</P> <P>(3) Must have shipping papers that show how the article moved from the beneficiary country to the United States. If the imported article was shipped through a country other than a beneficiary country and the invoices and other documents from the beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.213(c)(3) (i) through (iii) were met; and</P> <P>(4) Must be prepared to explain, upon request from Customs, how the records and internal controls referred to in paragraphs (b)(1) through (b)(3) of this <PRTPAGE P="182"/>section justify the importer's claim for preferential treatment.</P> <CITA>[T.D. 00-67, 65 FR 59676, Oct. 5, 2000, as amended by T.D. 03-15, 68 FR 13827, Mar. 21, 2003]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—United States-Caribbean Basin Trade Partnership Act</HD> <SUBJGRP> <HD SOURCE="HED">Textile and Apparel Articles Under the United States-Caribbean Basin Trade Partnership Act</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>T.D. 00-68, 65 FR 59658, Oct. 5, 2000, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 10.221</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>Title II of Public Law 106-200 (114 Stat. 251), entitled the United States-Caribbean Basin Trade Partnership Act (CBTPA), amended section 213(b) of the Caribbean Basin Economic Recovery Act (the CBERA, 19 U.S.C. 2701-2707) to authorize the President to extend additional trade benefits to countries that have been designated as beneficiary countries under the CBERA. Section 213(b)(2) of the CBERA (19 U.S.C. 2703(b)(2)) provides for the preferential treatment of certain textile and apparel articles from CBERA beneficiary countries. The provisions of §§ 10.221-10.227 of this part set forth the legal requirements and procedures that apply for purposes of obtaining preferential treatment pursuant to CBERA section 213(b)(2).</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000; 65 FR 67262, Nov. 9, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.222</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>When used in §§ 10.221 through 10.228, the following terms have the meanings indicated:</P> <P> <E T="03">Apparel articles.</E> “Apparel articles” means goods classifiable in Chapters 61 and 62 and headings 6501, 6502, 6503, and 6504 and subheadings 6406.99 and 6505.90 of the HTSUS.</P> <P> <E T="03">Assembled in one or more CBTPA beneficiary countries.</E> “Assembled in one or more CBTPA beneficiary countries” when used in the context of a textile or apparel article has reference to a joining together of two or more components that occurred in one or more CBTPA beneficiary countries, whether or not a prior joining operation was performed on the article or any of its components in the United States.</P> <P> <E T="03">CBERA.</E> “CBERA” means the Caribbean Basin Economic Recovery Act, 19 U.S.C. 2701-2707.</P> <P> <E T="03">CBTPA beneficiary country.</E> “CBTPA beneficiary country” means a “beneficiary country” as defined in § 10.191(b)(1) for purposes of the CBERA which the President also has designated as a beneficiary country for purposes of preferential treatment of textile and apparel articles under 19 U.S.C. 2703(b)(2) and which has been the subject of a finding by the President or his designee, published in the <E T="04">Federal Register,</E> that the beneficiary country has satisfied the requirements of 19 U.S.C. 2703(b)(4)(A)(ii).</P> <P> <E T="03">Cut in one or more CBTPA beneficiary countries.</E> “Cut in one or more CBTPA beneficiary countries” when used with reference to apparel articles means that all fabric components used in the assembly of the article were cut from fabric in one or more CBTPA beneficiary countries.</P> <P> <E T="03">Foreign.</E> “Foreign” means of a country other than the United States or a CBTPA beneficiary country.</P> <P> <E T="03">HTSUS.</E> “HTSUS” means the Harmonized Tariff Schedule of the United States.</P> <P> <E T="03">Knit-to-shape.</E> The term “knit-to-shape” applies to any apparel article of which 50 percent or more of the exterior surface area is formed by major parts that have been knitted or crocheted directly to the shape used in the apparel article, with no consideration being given to patch pockets, appliques, or the like. Minor cutting, trimming, or sewing of those major parts will not affect the determination of whether an apparel article is “knit-to-shape.”</P> <P> <E T="03">Luggage.</E> “Luggage” means travel goods (such as trunks, hand trunks, lockers, valises, satchels, suitcases, wardrobe cases, overnight bags, pullman bags, gladstone bags, traveling bags, knapsacks, kitbags, haversacks, duffle bags, and like articles designed to contain clothing or other personal effects during travel) and brief cases, portfolios, school bags, photographic equipment bags, golf bags, camera <PRTPAGE P="183"/>cases, binocular cases, gun cases, occupational luggage cases (for example, physicians' cases, sample cases), and like containers and cases designed to be carried with the person. The term “luggage” does not include handbags (that is, pocketbooks, purses, shoulder bags, clutch bags, and all similar articles, by whatever name known, customarily carried by women or girls). The term “luggage” also does not include flat goods (that is, small flatware designed to be carried on the person, such as banknote cases, bill cases, billfolds, bill purses, bill rolls, card cases, change cases, cigarette cases, coin purses, coin holders, compacts, currency cases, key cases, letter cases, license cases, money cases, pass cases, passport cases, powder cases, spectacle cases, stamp cases, vanity cases, tobacco pouches, and similar articles).</P> <P> <E T="03">Made in one or more CBTPA beneficiary countries.</E> “Made in one or more CBTPA beneficiary countries” when used with reference to non-underwear t-shirts means cut in one or more CBTPA beneficiary countries and wholly assembled in one or more CBTPA beneficiary countries.</P> <P> <E T="03">Major parts.</E> “Major parts” means integral components of an apparel article but does not include collars, cuffs, waistbands, plackets, pockets, linings, paddings, trim, accessories, or similar parts or components.</P> <P> <E T="03">NAFTA.</E> “NAFTA” means the North American Free Trade Agreement entered into by the United States, Canada, and Mexico on December 17, 1992.</P> <P> <E T="03">Preferential treatment.</E> “Preferential treatment” means entry, or withdrawal from warehouse for consumption, in the customs territory of the United States free of duty and free of any quantitative restrictions, limitations, or consultation levels as provided in 19 U.S.C. 2703(b)(2).</P> <P> <E T="03">Wholly assembled in one or more CBTPA beneficiary countries.</E> “Wholly assembled in one or more CBTPA beneficiary countries” when used in the context of a textile or apparel article has reference to a joining together of all components (including thread, decorative embellishments, buttons, zippers, or similar components) that occurred only in one or more CBTPA beneficiary countries.</P> <P> <E T="03">Wholly formed.</E> “Wholly formed,” when used with reference to yarns, means that all of the production processes, starting with the extrusion of filament, strip, film, or sheet and including slitting a film or sheet into strip or the spinning of all fibers into yarn or both and ending with a yarn or plied yarn, took place in a single country, and, when used with reference to fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile strips, yarns, twine, cordage, rope, or strips of fabric and ending with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took place in a single country.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000; 65 FR 67262, Nov. 9, 2000; T.D. 01-74, 66 FR 50537, Oct. 4, 2001, as amended by T.D. 03-12, 68 FR 13831, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.223</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <P>(a) <E T="03">General.</E> The preferential treatment referred to in § 10.221 applies to the following textile and apparel articles that are imported directly into the customs territory of the United States from a CBTPA beneficiary country:</P> <P>(1) Apparel articles sewn or otherwise assembled in one or more CBTPA beneficiary countries from fabrics wholly formed and cut, or from components knit-to-shape, in the United States, from yarns wholly formed in the United States (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are wholly formed and cut in the United States) that are entered under subheading 9802.00.80 of the HTSUS, and provided that any other processing involving the article conforms to the rules set forth in paragraph (b) of this section;</P> <P>(2) Apparel articles sewn or otherwise assembled in one or more CBTPA beneficiary countries from fabrics wholly formed and cut, or from components knit-to-shape, in the United States, from yarns wholly formed in the United States (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are wholly formed and cut in the United States) that are entered under Chapter 61 or 62 of the <PRTPAGE P="184"/>HTSUS, if, after that assembly, the articles would have qualified for entry under subheading 9802.00.80 of the HTSUS but for the fact that the articles were embroidered or subjected to stone-washing, enzyme-washing, acid washing, perma-pressing, oven-baking, bleaching, garment-dyeing, screen printing, or other similar processes in a CBTPA beneficiary country, and provided that any other processing involving the article conforms to the rules set forth in paragraph (b) of this section;</P> <P>(3) Apparel articles sewn or otherwise assembled in one or more CBTPA beneficiary countries with thread formed in the United States from fabrics wholly formed in the United States and cut in one or more CBTPA beneficiary countries from yarns wholly formed in the United States, or from components knit-to-shape in the United States from yarns wholly formed in the United States, or both (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are wholly formed in the United States), and provided that any other processing involving the article conforms to the rules set forth in paragraph (b) of this section;</P> <P>(4) Apparel articles (other than socks provided for in heading 6115 of the HTSUS) knit to shape in a CBTPA beneficiary country from yarns wholly formed in the United States, and knitted or crocheted apparel articles (other than non-underwear t-shirts classifiable under subheadings 6109.10.00 and 6109.90.10 of the HTSUS and described in paragraph (a)(5) of this section) cut and wholly assembled in one or more CBTPA beneficiary countries from fabrics formed in one or more CBTPA beneficiary countries or in one or more CBTPA beneficiary countries and the United States from yarns wholly formed in the United States (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are formed in one or more CBTPA beneficiary countries);</P> <P>(5) Non-underwear t-shirts, classifiable under subheadings 6109.10.00 and 6109.90.10 of the HTSUS, made in one or more CBTPA beneficiary countries from fabric formed in one or more CBTPA beneficiary countries from yarns wholly formed in the United States;</P> <P>(6) Brassieres classifiable under subheading 6212.10 of the HTSUS, if both cut and sewn or otherwise assembled in the United States, or in one or more CBTPA beneficiary countries, or in both, other than articles entered as articles described in paragraphs (a)(1) through (a)(5), paragraphs (a)(7) through (a)(9), or paragraph (a)(12), and provided that any applicable additional requirements set forth in § 10.228 are met;</P> <P>(7) Apparel articles, other than articles described in paragraph (a)(6) of this section, that are both cut (or knit-to-shape) and sewn or otherwise assembled in one or more CBTPA beneficiary countries, from fabrics or yarn that is not formed in the United States or in one or more CBTPA beneficiary countries, to the extent that apparel articles of those fabrics or yarn would be eligible for preferential treatment, without regard to the source of the fabrics or yarn, under Annex 401 of the NAFTA;</P> <P>(8) Apparel articles that are both cut (or knit-to-shape) and sewn or otherwise assembled in one or more CBTPA beneficiary countries from fabrics or yarn that the President or his designee has designated in the <E T="04">Federal Register</E> as not available in commercial quantities in the United States;</P> <P>(9) A handloomed, handmade, or folklore textile or apparel article of a CBTPA beneficiary country that the President or his designee and representatives of the CBTPA beneficiary country mutually agree is a handloomed, handmade, or folklore article and that is certified as a handloomed, handmade, or folklore article by the competent authority of the CBTPA beneficiary country;</P> <P>(10) Textile luggage assembled in a CBTPA beneficiary country from fabric wholly formed and cut in the United States, from yarns wholly formed in the United States, that is entered under subheading 9802.00.80 of the HTSUS;</P> <P>(11) Textile luggage assembled in a CBTPA beneficiary country from fabric cut in a CBTPA beneficiary country <PRTPAGE P="185"/>from fabric wholly formed in the United States from yarns wholly formed in the United States;</P> <P>(12) Knitted or crocheted apparel articles cut and assembled in one or more CBTPA beneficiary countries from fabrics wholly formed in the United States from yarns wholly formed in the United States, or from components knit-to-shape in the United States from yarns wholly formed in the United States, or both (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are formed wholly in the United States), provided that the assembly is with thread formed in the United States, and provided that any other processing involving the article conforms to the rules set forth in paragraph (b) of this section; and</P> <P>(13) Apparel articles sewn or otherwise assembled in one or more CBTPA beneficiary countries with thread formed in the United States:</P> <P>(i) From components cut in the United States and in one or more CBTPA beneficiary countries from fabric wholly formed in the United States from yarns wholly formed in the United States (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS);</P> <P>(ii) From components knit-to-shape in the United States and one or more CBTPA beneficiary countries from yarns wholly formed in the United States; or</P> <P>(iii) From any combination of two or more of the cutting or knitting-to-shape operations described in paragraph (a)(13)(i) or paragraph (a)(13)(ii) of this section; and</P> <P>(iv) Provided that any processing not described in this paragraph(a)(13) conforms to the rules set forth in paragraph (b) of this section.</P> <P>(b) <E T="03">Dyeing, printing, finishing and other operations</E>—(1) <E T="03">Dyeing, printing and finishing operations.</E> Dyeing, printing, and finishing operations may be performed on any yarn, fabric, or knit-to-shape or other component used in the production of any article described under paragraph (a) of this section without affecting the eligibility of the article for preferential treatment, provided that the operation is performed in the United States or in a CBTPA beneficiary country and not in any other country and subject to the following additional conditions:</P> <P>(i) In the case of an article described in paragraph (a)(1), (a)(2), (a)(3), (a)(12), or (a)(13) of this section that is entered on or after September 1, 2002, and that contains a knitted or crocheted or woven fabric, or a knitted or crocheted or woven fabric component produced from fabric, that was wholly formed in the UnitedStates from yarns wholly formed in the United States, any dyeing, printing, or finishing of that knitted or crocheted or woven fabric or component must have been carried out in the United States; and</P> <P>(ii) In the case of assembled luggage described in paragraph (a)(10) of this section, an operation may be performed in a CBTPA beneficiary country only if that operation is incidental to the assembly process within the meaning of § 10.16.</P> <P>(2) <E T="03">Other operations.</E> An article described under paragraph (a) of this section that is otherwise eligible for preferential treatment will not be disqualified from receiving that treatment by virtue of having undergone one or more operations such as embroidering, stone-washing, enzyme-washing, acid washing, perma-pressing, oven-baking, bleaching, garment-dyeing or screen printing, provided that the operation is performed in the United States or in a CBTPA beneficiary country and not in any other country. However, in the case of assembled luggage described in paragraph (a)(10) of this section, an operation may be performed in a CBTPA beneficiary country without affecting the eligibility of the article for preferential treatment only if it is incidental to the assembly process within the meaning of § 10.16.</P> <P>(c) <E T="03">Special rules for certain component materials</E>—(1) <E T="03">Foreign findings, trimmings, interlinings, fibers and yarns</E>—(i) <E T="03">General.</E> An article otherwise described under paragraph (a) of this section will not be ineligible for the preferential treatment referred to in § 10.221 because the article contains:</P> <P>(A) Findings and trimmings of foreign origin, if the value of those findings and trimmings does not exceed 25 <PRTPAGE P="186"/>percent of the cost of the components of the assembled article. For purposes of this section “findings and trimmings” include, but are not limited to, hooks and eyes, snaps, buttons, “bow buds,” decorative lace trim, elastic strips (but only if they are each less than 1 inch in width and are used in the production of brassieres), zippers (including zipper tapes), labels, and sewing thread except in the case of an article described in paragraph (a)(3) or (a)(12) of this section;</P> <P>(B) Interlinings of foreign origin, if the value of those interlinings does not exceed 25 percent of the cost of the components of the assembled article. For purposes of this section “interlinings” include only a chest type plate, a “hymo” piece, or “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made filaments;</P> <P>(C) Any combination of findings and trimmings of foreign origin and interlinings of foreign origin, if the total value of those findings and trimmings and interlinings does not exceed 25 percent of the cost of the components of the assembled article; or</P> <P>(D) Fibers or yarns not wholly formed in the United States or in one or more CBTPA beneficiary countries if the total weight of all those fibers and yarns is not more than 7 percent of the total weight of the article, except in the case of any apparel article described in paragraph (a)(1) through (a)(5) or (a)(12) of this section containing elastomeric yarns which will be eligible for preferential treatment only if those yarns are wholly formed in the United States.</P> <P>(ii) <E T="03">“Cost” and “value” defined.</E> The “cost” of components and the “value” of findings and trimmings or interlinings referred to in paragraph (c)(1)(i) of this section means:</P> <P>(A) The price of the components, findings and trimmings, or interlinings when last purchased, f.o.b. port of exportation, as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(<E T="03">1</E>) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price; or</P> <P>(<E T="03">2</E>) If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the freight, insurance, packing, and other costs incurred in transporting the components, findings and trimmings, or interlinings to the place of production if included in that price; or</P> <P>(B) If the price cannot be determined under paragraph (c)(1)(ii)(A) of this section or if Customs finds that price to be unreasonable, all reasonable expenses incurred in the growth, production, manufacture, or other processing of the components, findings and trimmings, or interlinings, including the cost or value of materials and general expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the components, findings and trimmings, or interlinings to the port of exportation.</P> <P>(iii) <E T="03">Treatment of fibers and yarns as findings or trimmings.</E> If any fibers or yarns not wholly formed in the United States or one or more beneficiary countries are used in an article as a finding or trimming described in paragraph (c)(1)(i)(A) of this section, the fibers or yarns will be considered to be a finding or trimming for purposes of paragraph (c)(1)(i) of this section.</P> <P>(2) <E T="03">Special rule for nylon filament yarn.</E> An article otherwise described under paragraph (a)(1), (a)(2), (a)(3) or (a)(12) of this section will not be ineligible for the preferential treatment referred to in § 10.221 because the article contains nylon filament yarn (other than elastomeric yarn) that is classifiable under subheading 5402.10.30, 5402.10.60, 5402.31.30, 5402.31.60, 5402.32.30, 5402.32.60, 5402.41.10, 5402.41.90, 5402.51.00, or 5402.61.00 of the HTSUS duty-free from Canada, Mexico or Israel.</P> <P>(3) <E T="03">Dyed, printed, or finished thread.</E> An article otherwise described under paragraph (a) of this section will not be ineligible for the preferential treatment referred to in § 10.221 because the thread used to assemble the article is dyed, printed, or finished in one or more CBTPA beneficiary countries.</P> <P>(d) <E T="03">Imported directly defined.</E> For purposes of paragraph (a) of this section, the words “imported directly” mean:<PRTPAGE P="187"/> </P> <P>(1) Direct shipment from any CBTPA beneficiary country to the United States without passing through the territory of any country that is not a CBTPA beneficiary country;</P> <P>(2) If the shipment is from any CBTPA beneficiary country to the United States through the territory of any country that is not a CBTPA beneficiary country, the articles in the shipment do not enter into the commerce of any country that is not a CBTPA beneficiary country while en route to the United States and the invoices, bills of lading, and other shipping documents show the United States as the final destination; or</P> <P>(3) If the shipment is from any CBTPA beneficiary country to the United States through the territory of any country that is not a CBTPA beneficiary country, and the invoices and other documents do not show the United States as the final destination, the articles in the shipment upon arrival in the United States are imported directly only if they:</P> <P>(i) Remained under the control of the customs authority of the intermediate country;</P> <P>(ii) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the producer's sales agent; and</P> <P>(iii) Were not subjected to operations other than loading or unloading, and other activities necessary to preserve the articles in good condition.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000; 65 FR 67262, Nov. 9, 2000, as amended by T.D. 01-74, 66 FR 50537, Oct. 4, 2001; T.D. 03-12, 68 FR 13832, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.224</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <P>(a) <E T="03">General.</E> A Certificate of Origin must be employed to certify that a textile or apparel article being exported from a CBTPA beneficiary country to the United States qualifies for the preferential treatment referred to in § 10.221. The Certificate of Origin must be prepared by the exporter in the CBTPA beneficiary country in the form specified in paragraph (b) of this section. Where the CBTPA beneficiary country exporter is not the producer of the article, that exporter may complete and sign a Certificate of Origin on the basis of:</P> <P>(1) Its reasonable reliance on the producer's written representation that the article qualifies for preferential treatment; or</P> <P>(2) A completed and signed Certificate of Origin for the article voluntarily provided to the exporter by the producer.</P> <P>(b) <E T="03">Form of Certificate.</E> The Certificate of Origin referred to in paragraph (a) of this section must be in the following format:</P> <GPH DEEP="447" SPAN="2"> <PRTPAGE P="188"/> <GID>ER21MR03.002</GID> </GPH> <P>(c) <E T="03">Preparation of Certificate.</E> The following rules will apply for purposes of completing the Certificate of Origin set forth in paragraph (b) of this section:</P> <P>(1) Blocks 1 through 5 pertain only to the final article exported to the United States for which preferential treatment may be claimed;</P> <P>(2) Block 1 should state the legal name and address (including country) of the exporter;<PRTPAGE P="189"/> </P> <P>(3) Block 2 should state the legal name and address (including country) of the producer. If there is more than one producer, attach a list stating the legal name and address (including country) of all additional producers. If this information is confidential, it is acceptable to state “available to Customs upon request” in block 2. If the producer and the exporter are the same, state “same” in block 2;</P> <P>(4) Block 3 should state the legal name and address (including country) of the importer;</P> <P>(5) In block 4, insert the letter that designates the preference group which applies to the article according to the description contained in the CFR provision cited on the Certificate for that group;</P> <P>(6) Block 5 should provide a full description of each article. The description should be sufficient to relate it to the invoice description and to the description of the article in the international Harmonized System. Include the invoice number as shown on the commercial invoice or, if the invoice number is not known, include another unique reference number such as the shipping order number;</P> <P>(7) Blocks 6 through 10 must be completed only when the block in question calls for information that is relevant to the preference group identified in block 4;</P> <P>(8) Block 6 should state the legal name and address (including country) of the fabric producer;</P> <P>(9) Block 7 should state the legal name and address (including country) of the yarn producer;</P> <P>(10) Block 8 should state the legal name and address (including country) of the thread producer;</P> <P>(11) Block 9 should state the name of the folklore article or should state that the article is handloomed or handmade of handloomed fabric;</P> <P>(12) Block 10 should be completed if the article described in block 5 incorporates a fabric or yarn described in preference group G and should state the name of the fabric or yarn that has been considered as being in short supply in the NAFTA or that has been designated as not available in commercial quantities in the United States;</P> <P>(13) Block 11 must contain the signature of the exporter or of the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(14) Block 15 should reflect the date on which the Certificate was completed and signed;</P> <P>(15) Block 16 should be completed if the Certificate is intended to cover multiple shipments of identical articles as described in block 5 that are imported into the United States during a specified period of up to one year (see § 10.226(b)(4)(ii)). The “from” date is the date on which the Certificate became applicable to the article covered by the blanket Certificate (this date may be prior to the date reflected in block 15). The “to” date is the date on which the blanket period expires; and</P> <P>(16) The Certificate may be printed and reproduced locally. If more space is needed to complete the Certificate, attach a continuation sheet.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000; 65 FR 67263, Nov. 9, 2000, as amended by T.D. 03-12, 68 FR 13833, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.225</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <P>(a) <E T="03">Declaration.</E> In connection with a claim for preferential treatment for a textile or apparel article described in § 10.223, the importer must make a written declaration that the article qualifies for that treatment. The inclusion on the entry summary, or equivalent documentation, of the subheading within Chapter 98 of the HTSUS under which the article is classified will constitute the written declaration. Except in any of the circumstances described in § 10.226(d)(1), the declaration required under this paragraph must be based on a Certificate of Origin that has been completed and properly executed in accordance with § 10.224 and that covers the article being imported.</P> <P>(b) <E T="03">Corrected declaration.</E> If, after making the declaration required under paragraph (a) of this section, the importer has reason to believe that a Certificate of Origin on which a declaration was based contains information that is not correct, the importer must within 30 calendar days after the date of discovery of the error make a corrected declaration and pay any duties <PRTPAGE P="190"/>that may be due. A corrected declaration will be effected by submission of a letter or other written statement to the Customs port where the declaration was originally filed.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000; 65 FR 67263, Nov. 9, 2000, as amended by T.D. 03-12, 68 FR 13835, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.226</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <P>(a) <E T="03">Maintenance of records.</E> Each importer claiming preferential treatment for an article under § 10.225 must maintain in the United States, in accordance with the provisions of part 163 of this chapter, all records relating to the importation of the article. Those records must include the original Certificate of Origin referred to in § 10.225(a) and any other relevant documents or other records as specified in § 163.1(a) of this chapter.</P> <P>(b) <E T="03">Submission of Certificate.</E> An importer who claims preferential treatment on a textile or apparel article under § 10.225(a) must provide, at the request of the port director, a copy of the Certificate of Origin pertaining to the article. A Certificate of Origin submitted to Customs under this paragraph:</P> <P>(1) Must be in writing or must be transmitted electronically pursuant to any electronic data interchange system authorized by Customs for that purpose;</P> <P>(2) Must be signed by the exporter or by the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(3) Must be completed either in the English language or in the language of the country from which the article is exported. If the Certificate is completed in a language other than English, the importer must provide to Customs upon request a written English translation of the Certificate; and</P> <P>(4) May be applicable to:</P> <P>(i) A single importation of an article into the United States, including a single shipment that results in the filing of one or more entries and a series of shipments that results in the filing of one entry; or</P> <P>(ii) Multiple importations of identical articles into the United States that occur within a specified blanket period, not to exceed 12 months, set out in the Certificate by the exporter. For purposes of this paragraph and § 10.224(c)(15), “identical articles” means articles that are the same in all material respects, including physical characteristics, quality, and reputation.</P> <P>(c) <E T="03">Correction and nonacceptance of Certificate.</E> If the port director determines that a Certificate of Origin is illegible or defective or has not been completed in accordance with paragraph (b) of this section, the importer will be given a period of not less than five working days to submit a corrected Certificate. A Certificate will not be accepted in connection with subsequent importations during a period referred to in paragraph (b)(4)(ii) of this section if the port director determined that a previously imported identical article covered by the Certificate did not qualify for preferential treatment.</P> <P>(d) <E T="03">Certificate not required</E>—(1) <E T="03">General.</E> Except as otherwise provided in paragraph (d)(2) of this section, an importer is not required to have a Certificate of Origin in his possession for:</P> <P>(i) An importation of an article for which the port director has in writing waived the requirement for a Certificate of Origin because the port director is otherwise satisfied that the article qualifies for preferential treatment;</P> <P>(ii) A non-commercial importation of an article; or</P> <P>(iii) A commercial importation of an article whose value does not exceed US $2,500, provided that, unless waived by the port director, the producer, exporter, importer or authorized agent includes on, or attaches to, the invoice or other document accompanying the shipment the following signed statement: </P> <EXTRACT> <P>I hereby certify that the article covered by this shipment qualifies for preferential treatment under the CBTPA.</P> <P>Check One: </P> <FP SOURCE="FP-1">() Producer</FP> <FP SOURCE="FP-1">() Exporter</FP> <FP SOURCE="FP-1">() Importer</FP> <FP SOURCE="FP-1">() Agent</FP> <FP SOURCE="FP-DASH"/> <FP>Name</FP> <FP SOURCE="FP-DASH"> <PRTPAGE P="191"/> </FP> <FP>Title</FP> <FP SOURCE="FP-DASH"/> <FP>Address</FP> <FP SOURCE="FP-DASH"/> <FP>Signature and Date</FP> </EXTRACT> <P>(2) <E T="03">Exception.</E> If the port director determines that an importation described in paragraph (d)(1) of this section forms part of a series of importations that may reasonably be considered to have been undertaken or arranged for the purpose of avoiding a Certificate of Origin requirement under §§ 10.224 through 10.226, the port director will notify the importer in writing that for that importation the importer must have in his possession a valid Certificate of Origin to support the claim for preferential treatment. The importer will have 30 calendar days from the date of the written notice to obtain a valid Certificate of Origin, and a failure to timely obtain the Certificate of Origin will result in denial of the claim for preferential treatment. For purposes of this paragraph, a “series of importations” means two or more entries covering articles arriving on the same day from the same exporter and consigned to the same person.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000, as amended by T.D. 03-12, 68 FR 13835, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.227</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> <P>(a) <E T="03">Verification by Customs.</E> A claim for preferential treatment made under § 10.225, including any statements or other information contained on a Certificate of Origin submitted to Customs under § 10.226, will be subject to whatever verification the port director deems necessary. In the event that the port director for any reason is prevented from verifying the claim, the port director may deny the claim for preferential treatment. A verification of a claim for preferential treatment may involve, but need not be limited to, a review of:</P> <P>(1) All records required to be made, kept, and made available to Customs by the importer or any other person under part 163 of this chapter;</P> <P>(2) Documentation and other information regarding the country of origin of an article and its constituent materials, including, but not limited to, production records, information relating to the place of production, the number and identification of the types of machinery used in production, and the number of workers employed in production; and</P> <P>(3) Evidence to document the use of U.S. materials in the production of the article in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents.</P> <P>(b) <E T="03">Importer requirements.</E> In order to make a claim for preferential treatment under § 10.225, the importer:</P> <P>(1) Must have records that explain how the importer came to the conclusion that the textile or apparel article qualifies for preferential treatment. Those records must include documents that support a claim that the article in question qualifies for preferential treatment because it is specifically described in one of the provisions under § 10.223(a). If the importer is claiming that the article incorporates fabric or yarn that was wholly formed in the United States, the importer must have records that identify the U.S. producer of the fabric or yarn. A properly completed Certificate of Origin in the form set forth in § 10.224(b) is a record that would serve these purposes;</P> <P>(2) Must establish and implement internal controls which provide for the periodic review of the accuracy of the Certificates of Origin or other records referred to in paragraph (b)(1) of this section;</P> <P>(3) Must have shipping papers that show how the article moved from the CBTPA beneficiary country to the United States. If the imported article was shipped through a country other than a CBTPA beneficiary country and the invoices and other documents from the CBTPA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.223(d)(3)(i) through (iii) were met; and</P> <P>(4) Must be prepared to explain, upon request from Customs, how the records and internal controls referred to in paragraphs (b)(1) through (b)(3) of this <PRTPAGE P="192"/>section justify the importer's claim for preferential treatment.</P> <CITA>[T.D. 00-68, 65 FR 59658, Oct. 5, 2000, as amended by T.D. 03-12, 68 FR 13835, Mar. 21, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.228</SECTNO> <SUBJECT>Additional requirements for preferential treatment of brassieres.</SUBJECT> <P>(a) <E T="03">Definitions.</E> When used in this section, the following terms have the meanings indicated:</P> <P>(1) <E T="03">Producer.</E> “Producer” means an individual, corporation, partnership, association, or other entity or group that exercises direct, daily operational control over the production process in a CBTPA beneficiary country.</P> <P>(2) <E T="03">Entity controlling production.</E> “Entity controlling production” means an individual, corporation, partnership, association, or other entity or group that is not a producer and that controls the production process in a CBTPA beneficiary country through a contractual relationship or other indirect means.</P> <P>(3) <E T="03">Fabrics formed in the United States.</E> “Fabrics formed in the United States” means fabrics that were produced by a weaving, knitting, needling, tufting, felting, entangling or other fabric-making process performed in the United States.</P> <P>(4) <E T="03">Cost.</E> “Cost” when used with reference to fabrics formed in the United States means:</P> <P>(i) The price of the fabrics when last purchased, f.o.b. port of exportation, as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(A) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price; or</P> <P>(B) If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the freight, insurance, packing, and other costs incurred in transporting the fabrics to the place of production if included in that price; or</P> <P>(ii) If the price cannot be determined under paragraph (a)(4)(i) of this section or if CBP finds that price to be unreasonable, all reasonable expenses incurred in the growth, production, manufacture, or other processing of the fabrics, including the cost or value of materials (which includes the cost of non-recoverable scrap generated in forming the fabrics) and general expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabrics to the port of exportation.</P> <P>(5) <E T="03">Declared customs value.</E> “Declared customs value” when used with reference to fabric contained in an article means the sum of:</P> <P>(i) The cost of fabrics formed in the United States that the producer or entity controlling production can verify; and</P> <P>(ii) The cost of all other fabric contained in the article, exclusive of all findings and trimmings, determined as follows:</P> <P>(A) In the case of fabric purchased by the producer or entity controlling production, the f.o.b. port of exportation price of the fabric as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(<E T="03">1</E>) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price, plus expenses for embroidering and dyeing, printing, and finishing operations applied to the fabric if not included in that price; or</P> <P>(<E T="03">2</E>) If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, plus expenses for embroidering and dyeing, printing, and finishing operations applied to the fabric if not included in that price, but less the freight, insurance, packing, and other costs incurred in transporting the fabric to the place of production if included in that price;</P> <P>(B) In the case of fabric for which the cost cannot be determined under paragraph (a)(5)(ii)(A) of this section or if CBP finds that cost to be unreasonable, all reasonable expenses incurred in the growth, production, or manufacture of the fabric, including the cost or value of materials (which includes the cost of non-recoverable scrap generated in the growth, production, or manufacture of the fabric), general expenses and embroidering and dyeing, printing, and <PRTPAGE P="193"/>finishing expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabric to the port of exportation;</P> <P>(C) In the case of fabric components purchased by the producer or entity controlling production, the f.o.b. port of exportation price of those fabric components as set out in the invoice or other commercial documents, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, or, if the price is other than f.o.b. port of exportation:</P> <P>(<E T="03">1</E>) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify; or</P> <P>(<E T="03">2</E>) If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, and less the freight, insurance, packing, and other costs incurred in transporting the fabric components to the place of production if included in that price; and</P> <P>(D) In the case of fabric components for which a fabric cost cannot be determined under paragraph (a)(5)(ii)(C) of this section or if CBP finds that cost to be unreasonable: all reasonable expenses incurred in the growth, production, or manufacture of the fabric components, including the cost or value of materials (which does not include the cost of recoverable scrap generated in the growth, production, or manufacture of the fabric components) and general expenses, but excluding the cost or value of any non-textile materials, and excluding expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabric components to the port of exportation.</P> <P>(6) <E T="03">Year.</E> “Year” means a 12-month period beginning on October 1 and ending on September 30 but does not include any 12-month period that began prior to October 1, 2000.</P> <P>(7) <E T="03">Entered.</E> “Entered” means entered, or withdrawn from warehouse for consumption, in the customs territory of the United States.</P> <P>(b) <E T="03">Limitations on preferential treatment</E>—(1) <E T="03">General.</E> During the year that begins on October 1, 2002, and during any subsequent year, articles of a producer or an entity controlling production that conform to the production standards set forth in § 10.223(a)(6) will be eligible for preferential treatment only if:</P> <P>(i) The aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.223(a)(6) during the immediately preceding year was at least 75 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.223(a)(6) during that year; or</P> <P>(ii) In a case in which the 75 percent requirement set forth in paragraph (b)(1)(i) of this section was not met during a year and therefore those articles of that producer or that entity controlling production were not eligible for preferential treatment during the following year, the aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.223(a)(6) and that were entered during the immediately preceding year was at least 85 <PRTPAGE P="194"/>percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.223(a)(6) and that were entered during that year; and</P> <P>(iii) In conjunction with the filing of the claim for preferential treatment under § 10.225, the importer records on the entry summary or warehouse withdrawal for consumption (CBP Form 7501, column 34), or its electronic equivalent, the distinct and unique identifier assigned by CBP to the applicable documentation prescribed under paragraph (c) of this section.</P> <P>(2) <E T="03">Rules of application</E>—(i) <E T="03">General.</E> For purposes of paragraphs (b)(1)(i) and (b)(1)(ii) of this section and for purposes of preparing and filing the documentation prescribed in paragraph (c) of this section, the following rules will apply:</P> <P>(A) The articles in question must have been produced in the manner specified in § 10.223(a)(6) and the articles in question must be entered within the same year;</P> <P>(B) Articles that are exported to countries other than the United States and are never entered are not to be considered in determining compliance with the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section;</P> <P>(C) Articles that are entered under an HTSUS subheading other than the HTSUS subheading which pertains to articles described in § 10.223(a)(6) are not to be considered in determining compliance with the 75 percent standard specified in paragraph (b)(1)(i) of this section;</P> <P>(D) For purposes of determining compliance with the 85 percent standard specified in paragraph (b)(1)(ii) of this section, all articles that conform to the production standards set forth in § 10.223(a)(6) must be considered, regardless of the HTSUS subheading under which they were entered;</P> <P>(E) Fabric components and fabrics that constitute findings or trimmings are not to be considered in determining compliance with the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section;</P> <P>(F) Beginning October 1, 2002, in order for articles to be eligible for preferential treatment in a given year, a producer of, or entity controlling production of, those articles must have met the 75 percent standard specified in paragraph (b)(1)(i) of this section during the immediately preceding year. If articles of a producer or entity controlling production fail to meet the 75 percent standard specified in paragraph (b)(1)(i) of this section during a year, articles of that producer or entity controlling production:</P> <P>(<E T="03">1</E>) Will not be eligible for preferential treatment during the following year;</P> <P>(<E T="03">2</E>) Will remain ineligible for preferential treatment until the year that follows a year in which articles of that producer or entity controlling production met the 85 percent standard specified in paragraph (b)(1)(ii) of this section; and</P> <P>(<E T="03">3</E>) After the 85 percent standard specified in paragraph (b)(1)(ii) of this section has been met, will again be subject to the 75 percent standard specified in paragraph (b)(1)(i) of this section during the following year for purposes of determining eligibility for preferential treatment in the next year.</P> <P>(G) A new producer or new entity controlling production, that is, a producer or entity controlling production which did not produce or control production of articles that were entered as articles described in § 10.223(a)(6) during the immediately preceding year, must first establish compliance with the 85 percent standard specified in paragraph (b)(1)(ii) of this section as a prerequisite to preparation of the declaration of compliance referred to in paragraph (c) of this section;</P> <P>(H) A declaration of compliance prepared by a producer or by an entity controlling production must cover all production of that producer or all production that the entity controls for the year in question;</P> <P>(I) A producer is not required to prepare a declaration of compliance if all of its production is covered by a declaration of compliance prepared by an entity controlling production;<PRTPAGE P="195"/> </P> <P>(J) In the case of a producer, the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section and the declaration of compliance procedure under paragraph (c) of this section apply to all articles of that producer for the year in question, even if some but not all of that production is also covered by a declaration of compliance prepared by an entity controlling production;</P> <P>(K) The U.S. importer does not have to be the producer or the entity controlling production who prepared the declaration of compliance; and</P> <P>(L) The exclusion references regarding findings and trimmings in paragraph (b)(1)(i) and paragraph (b)(1)(ii) of this section apply to all findings and trimmings, whether or not they are of foreign origin.</P> <P>(ii) <E T="03">Examples.</E> The following examples will illustrate application of the principles set forth in paragraph (b)(2)(i) of this section. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>A CBTPA beneficiary country producer of articles that meet the production standards specified in § 10.223(a)(6) in the first year sends 50 percent of that production to CBTPA region markets and the other 50 percent to the U.S. market; the cost of the fabrics formed in the United States equals 100 percent of the value of all of the fabric in the articles sent to the CBTPA region and 60 percent of the value of all of the fabric in the articles sent to the United States. Although the cost of fabrics formed in the United States is more than 75 percent of the value of all of the fabric used in all of the articles produced, this producer could not prepare a valid declaration of compliance because the articles sent to the United States did not meet the minimum 75 percent standard.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>A producer sends to the United States in the first year three shipments of articles that meet the description in § 10.223(a)(6); one of those shipments is entered under the HTSUS subheading that covers articles described in § 10.223(a)(6), the second shipment is entered under the HTSUS subheading that covers articles described in § 10.223(a)(12), and the third shipment is entered under subheading 9802.00.80, HTSUS. In determining whether the minimum 75 percent standard has been met in the first year for purposes of entry of articles under the HTSUS subheading that covers articles described in § 10.223(a)(6) during the following (that is, second) year, consideration must be restricted to the articles in the first shipment and therefore must not include the articles in the second and third shipments.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 3.</HD> <P>A producer in the second year begins production of articles that conform to the production standards specified in § 10.223(a)(6); some of those articles are entered in that year under HTSUS subheading 6212.10 and others under HTSUS subheading 9802.00.80 but none are entered in that year under the HTSUS subheading which pertains to articles described in § 10.223(a)(6) because the 75 percent standard had not been met in the preceding (that is, first) year. In this case the 85 percent standard applies, and all of the articles that were entered under the various HTSUS provisions in the second year must be taken into account in determining whether that 85 percent standard has been met. If the 85 percent was met in the aggregate for all of the articles entered in the second year, in the next (that is, third) year articles of that producer may receive preferential treatment under the HTSUS subheading which pertains to articles described in § 10.223(a)(6).</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 4.</HD> <P>An entity controlling production of articles that meet the description in § 10.223(a)(6) buys for the U.S., Canadian and Mexican markets; the articles in each case are first sent to the United States where they are entered for consumption and then placed in a commercial warehouse from which they are shipped to various stores in the United States, Canada and Mexico. Notwithstanding the fact that some of the articles ultimately ended up in Canada or Mexico, a declaration of compliance prepared by the entity controlling production must cover all of the articles rather than only those that remained in the United States because all of those articles had been entered for consumption.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 5.</HD> <P>Fabric is cut and sewn in the United States with other U.S. materials to form cups which are joined together to form brassiere front subassemblies in the United States, and those front subassemblies are then placed in a warehouse in the United States where they are held until the following year; during that following year all of the front subassemblies are shipped to a CBTPA beneficiary country where they are assembled with elastic strips and labels produced in an Asian country and other fabrics, components or materials produced in the CBTPA beneficiary country to form articles that meet the production standards specified in § 10.223(a)(6) and that are then shipped to the United States and entered during that same year. In determining whether the entered articles meet the minimum 75 or 85 percent standard, the fabric in the elastic strips and labels is to be disregarded entirely because the strips and labels constitute findings or trimmings for purposes of this section, and all of the fabric in the front subassemblies is countable because it was all formed in the United States and used in the <PRTPAGE P="196"/>production of articles that were entered in the same year.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 6.</HD> <P>A CBTPA beneficiary country producer's entire production of articles that meet the description in § 10.223(a)(6) is sent to a U.S. importer in two separate shipments, one in February and the other in June of the same calendar year; the articles shipped in February do not meet the minimum 75 percent standard, the articles shipped in June exceed the 85 percent standard, and the articles in the two shipments, taken together, do meet the 75 percent standard; the articles covered by the February shipment are entered for consumption on March 1 of that calendar year, and the articles covered by the June shipment are placed in a CBP bonded warehouse upon arrival and are subsequently withdrawn from warehouse for consumption on November 1 of that calendar year. The CBTPA beneficiary country producer may not prepare a valid declaration of compliance covering the articles in the first shipment because those articles did not meet the minimum 75 percent standard and because those articles cannot be included with the articles of the second shipment on the same declaration of compliance since they were entered in a different year. However, the CBTPA beneficiary country producer may prepare a valid declaration of compliance covering the articles in the second shipment because those articles did meet the requisite 85 percent standard which would apply for purposes of entry of articles in the following year.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 7.</HD> <P>A producer in the second year begins production of articles exclusively for the U.S. market that meet the production standards specified in § 10.223(a)(6), but the entered articles do not meet the requisite 85 percent standard until the third year; the entered articles fail to meet the 75 percent standard in the fourth year; and the entered articles do not attain the 85 percent standard until the sixth year. The producer's articles may not receive preferential treatment during the second year because there was no production (and thus there were no entered articles) in the immediately preceding (that is, first) year on which to assess compliance with the 75 percent standard. The producer's articles also may not receive preferential treatment during the third year because the 85 percent standard was not met in the immediately preceding (that is, second) year. However, the producer's articles are eligible for preferential treatment during the fourth year based on compliance with the 85 percent standard in the immediately preceding (that is, third) year. The producer's articles may not receive preferential treatment during the fifth year because the 75 percent standard was not met in the immediately preceding (that is, fourth) year. The producer's articles may not receive preferential treatment during the sixth year because the 85 percent standard has become applicable and was not met in the immediately preceding (that is, fifth) year. The producer's articles are eligible for preferential treatment during the seventh year because the 85 percent standard was met in the immediately preceding (that is, sixth) year, and during that seventh year the 75 percent standard is applicable for purposes of determining whether the producer's articles are eligible for preferential treatment in the following (that is, eighth) year.</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 8.</HD> <P>An entity controlling production (Entity A) uses five CBTPA beneficiary country producers (Producers 1-5), all of which produce only articles that meet the description in § 10.223(a)(6); Producers 1-4 send all of their production to the United States and Producer 5 sends 10 percent of its production to the United States and the rest to Europe; Producers 1-3 and Producer 5 produce only pursuant to contracts with Entity A, but Producer 4 also operates independently of Entity A by producing for several U.S. importers, one of which is an entity controlling production (Entity B) that also controls all of the production of articles of one other producer (Producer 6) which sends all of its production to the United States. A declaration of compliance prepared by Entity A must cover all of the articles of Producers 1-3 and the 10 percent of articles of Producer 5 that are sent to the United States and that portion of the articles of Producer 4 that are produced pursuant to the contract with Entity A, because Entity A controls the production of those articles. There is no need for Producers 1-3 and Producer 5 to prepare a declaration of compliance because they have no production that is not covered by a declaration of compliance prepared by an entity controlling production. A declaration of compliance prepared by Producer 4 would cover all of its production, that is, articles produced for Entity A, articles produced for Entity B, and articles produced independently for other U.S. importers; a declaration of compliance prepared by Entity B must cover that portion of the production of Producer 4 that it controls as well as all of the production of Producer 6 because Entity B also controls all of the production of Producer 6. Producer 6 would not prepare a declaration of compliance because all of its production is covered by the declaration of compliance prepared by Entity B.</P> </EXAMPLE> <P>(c) <E T="03">Documentation</E>—(1) <E T="03">Initial declaration of compliance.</E> In order for an importer to comply with the requirement set forth in paragraph (b)(1)(iii) of this section, the producer or the entity controlling production must have filed with CBP, in accordance with paragraph (c)(4) of this section, a declaration of compliance with the applicable <PRTPAGE P="197"/>75 or 85 percent requirement prescribed in paragraph (b)(1)(i) or (b)(1)(ii) of this section. After filing of the declaration of compliance has been completed, CBP will advise the producer or the entity controlling production of the distinct and unique identifier assigned to that declaration. The producer or the entity controlling production will then be responsible for advising each appropriate U.S. importer of that distinct and unique identifier for purposes of recording that identifier on the entry summary or warehouse withdrawal. In order to provide sufficient time for advising the U.S. importer of that distinct and unique identifier prior to the arrival of the articles in the United States, the producer or the entity controlling production should file the declaration of compliance with CBP at least 10 calendar days prior to the date of the first shipment of the articles to the United States.</P> <P>(2) <E T="03">Amended declaration of compliance.</E> If the information on the declaration of compliance referred to in paragraph (c)(1) of this section is based on an estimate because final year-end information was not available at that time and the final data differs from the estimate, or if the producer or the entity controlling production has reason to believe for any other reason that the declaration of compliance that was filed contained erroneous information, within 30 calendar days after the final year-end information becomes available or within 30 calendar days after the date of discovery of the error:</P> <P>(i) The producer or the entity controlling production must file with the CBP office identified in paragraph (c)(4) of this section an amended declaration of compliance containing that final year-end information or other corrected information; or</P> <P>(ii) If that final year-end information or other corrected information demonstrates noncompliance with the applicable 75 or 85 percent requirement, the producer or the entity controlling production must in writing advise both the CBP office identified in paragraph (c)(4) of this section and each appropriate U.S. importer of that fact.</P> <P>(3) <E T="03">Form and preparation of declaration of compliance</E>—(i) <E T="03">Form.</E> The declaration of compliance referred to in paragraph (c)(1) of this section may be printed and reproduced locally and must be in the following format: </P> <GPOTABLE CDEF="xl100,xl100" COLS="2" OPTS="L1,p1,7/8"> <TTITLE>Caribbean Basin Trade Partnership Act Declaration of Compliance for Brassieres</TTITLE> <TDESC>[19 CFR 10.223(a)(6) and 10.228]</TDESC> <BOXHD> <CHED H="1"/> <CHED H="1"/> </BOXHD> <ROW> <ENT I="22">1. Year beginning date: October 1, ___.</ENT> <ENT>Official U.S. Customs and Border</ENT> </ROW> <ROW> <ENT I="22">Year ending date: September 30, ___.</ENT> <ENT>Protection Use Only</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Assigned number: _____</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Assignment date: _____</ENT> </ROW> <ROW EXPSTB="01"> <ENT I="22">2. Identity of preparer (producer or entity controlling production):</ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">Full name and address:</ENT> <ENT>Telephone number: _____</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Facsimile number: _____</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Importer identification number: _____</ENT> </ROW> <ROW EXPSTB="01"> <ENT I="22">3. If the preparer is an entity controlling production, provide the following for each producer:</ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">Full name and address:</ENT> <ENT>Telephone number: _____</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Facsimile number: _____</ENT> </ROW> <ROW EXPSTB="01"> <ENT I="22">4. Aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of brassieres that were entered during the year: _____</ENT> </ROW> <ROW> <ENT I="22">5. Aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in brassieres that were entered during the year: _____</ENT> </ROW> <ROW> <ENT I="22">6. I declare that the aggregate cost of fabric (exclusive of all findings and trimmings) formed in the United States was at least 75 percent (or 85 percent, if applicable under 19 CFR 10.228(b)(1)(ii)) of the aggregate declared customs value of the fabric contained in brassieres entered during the year.</ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">7. Authorized signature:</ENT> <ENT>8. Name and title (print or type):</ENT> </ROW> <ROW> <ENT I="22">_________</ENT> </ROW> <ROW> <ENT I="22">Date:</ENT> </ROW> </GPOTABLE> <P>(ii) <E T="03">Preparation.</E> The following rules will apply for purposes of completing the declaration of compliance set forth in paragraph (c)(3)(i) of this section:<PRTPAGE P="198"/> </P> <P>(A) In block 1, fill in the year commencing October 1 and ending September 30 of the calendar year during which the applicable 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section was met;</P> <P>(B) Block 2 should state the legal name and address (including country) of the preparer and should also include the preparer's importer identification number (see § 24.5 of this chapter), if the preparer has one;</P> <P>(C) Block 3 should state the legal name and address (including country) of the CBTPA beneficiary country producer if that producer is not already identified in block 2. If there is more than one producer, attach a list stating the legal name and address (including country) of all additional producers;</P> <P>(D) Blocks 4 and 5 apply only to articles that were entered during the year identified in block 1; and</P> <P>(E) In block 7, the signature must be that of an authorized officer, employee, agent or other person having knowledge of the relevant facts and the date must be the date on which the declaration of compliance was completed and signed.</P> <P>(4) <E T="03">Filing of declaration of compliance.</E> The declaration of compliance referred to in paragraph (c)(1) of this section:</P> <P>(i) Must be completed either in the English language or in the language of the country in which the articles covered by the declaration were produced. If the declaration is completed in a language other than English, the producer or the entity controlling production must provide to CBP upon request a written English translation of the declaration; and</P> <P>(ii) Must be filed with the New York Strategic Trade Center, Customs and Border Protection, 1 Penn Plaza, New York, New York 10119.</P> <P>(d) <E T="03">Verification of declaration of compliance</E>—(1) <E T="03">Verification procedure</E>. A declaration of compliance filed under this section will be subject to whatever verification CBP deems necessary. In the event that CBP for any reason is prevented from verifying the statements made on a declaration of compliance, CBP may deny any claim for preferential treatment made under § 10.225 that is based on that declaration. A verification of a declaration of compliance may involve, but need not be limited to, a review of:</P> <P>(i) All records required to be made, kept, and made available to CBP by the importer, the producer, the entity controlling production, or any other person under part 163 of this chapter;</P> <P>(ii) Documentation and other information regarding all articles that meet the production standards specified in § 10.223(a)(6) that were exported to the United States and that were entered during the year in question, whether or not a claim for preferential treatment was made under § 10.225. Those records and other information include, but are not limited to, work orders and other production records, purchase orders, invoices, bills of lading and other shipping documents;</P> <P>(iii) Evidence to document the cost of fabrics formed in the United States that were used in the production of the articles in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents, work orders and other production records, and inventory control records;</P> <P>(iv) Evidence to document the cost or value of all fabric other than fabrics formed in the United States that were used in the production of the articles in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents, work orders and other production records, and inventory control records; and</P> <P>(v) Accounting books and documents to verify the records and information referred to in paragraphs (d)(1)(ii) through (d)(1)(iv) of this section. The verification of purchase orders, invoices and bills of lading will be accomplished through the review of a distinct audit trail. The audit trail documents must consist of a cash disbursement or purchase journal or equivalent records to establish the purchase of the fabric. The headings in each of these journals or other records must contain the date, vendor name, and amount paid for the fabric. The verification of production records and work orders will be accomplished through analysis of the inventory records of the producer or entity controlling production. <PRTPAGE P="199"/>The inventory records must reflect the production of the finished article which must be referenced to the original purchase order or lot number covering the fabric used in production. In the inventory production records, the inventory should show the opening balance of the inventory plus the purchases made during the accounting period and the inventory closing balance.</P> <P>(2) <E T="03">Notice of determination</E>. If, based on a verification of a declaration of compliance filed under this section, CBP determines that the applicable 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section was not met, CBP will publish a notice of that determination in the <E T="04">Federal Register</E>.</P> <CITA>[CBP Dec. 04-40, 69 FR 69518, Nov. 30, 2004]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Non-Textile Articles Under the United States-Caribbean Basin Trade Partnership Act</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>T.D. 00-68, 65 FR 59663, Oct. 5, 2000, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 10.231</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>Title II of Public Law 106-200 (114 Stat. 251), entitled the United States-Caribbean Basin Trade Partnership Act (CBTPA), amended section 213(b) of the Caribbean Basin Economic Recovery Act (the CBERA, 19 U.S.C. 2701-2707) to authorize the President to extend additional trade benefits to countries that have been designated as beneficiary countries under the CBERA. Section 213(b)(3) of the CBERA (19 U.S.C. 2703(b)(3)) provides for special preferential tariff treatment of certain non-textile articles that are otherwise excluded from duty-free treatment under the CBERA. The provisions of §§ 10.231-10.237 of this part set forth the legal requirements and procedures that apply for purposes of obtaining preferential tariff treatment pursuant to CBERA section 213(b)(3).</P> <CITA>[T.D. 00-68, 65 FR 59663, Oct. 5, 2000; 65 FR 67263, Nov. 9, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.232</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>When used in §§ 10.231 through 10.237, the following terms have the meanings indicated:</P> <P> <E T="03">CBERA.</E> “CBERA” means the Caribbean Basin Economic Recovery Act, 19 U.S.C. 2701-2707.</P> <P> <E T="03">CBTPA beneficiary country.</E> “CBTPA beneficiary country” means a “beneficiary country” as defined in § 10.191(b)(1) for purposes of the CBERA which the President also has designated as a beneficiary country for purposes of preferential duty treatment of articles under 19 U.S.C. 2703(b)(3) and which has been the subject of a finding by the President or his designee, published in the <E T="04">Federal Register,</E> that the beneficiary country has satisfied the requirements of 19 U.S.C. 2703(b)(4)(A)(ii).</P> <P> <E T="03">CBTPA originating good.</E> “CBTPA originating good” means a good that meets the rules of origin for a good as set forth in General Note 12, HTSUS, and in the appendix to part 181 of this chapter and as applied under § 10.233(b).</P> <P> <E T="03">HTSUS.</E> “HTSUS” means the Harmonized Tariff Schedule of the United States.</P> <P> <E T="03">NAFTA.</E> “NAFTA” means the North American Free Trade Agreement entered into by the United States, Canada, and Mexico on December 17, 1992.</P> <P> <E T="03">Preferential tariff treatment.</E> “Preferential tariff treatment” when used with reference to an imported article means entry, or withdrawal from warehouse for consumption, in the customs territory of the United States with duty and other tariff treatment that is identical to the tariff treatment that would be accorded at that time under Annex 302.2 of the NAFTA to an imported article described in the same 8-digit subheading of the HTSUS that is a good of Mexico.</P> <CITA>[T.D. 00-68, 65 FR 59663, Oct. 5, 2000; 65 FR 67264, Nov. 9, 2000]</CITA> </SECTION> <SECTION> <SECTNO>§ 10.233</SECTNO> <SUBJECT>Articles eligible for preferential tariff treatment.</SUBJECT> <P>(a) <E T="03">General.</E> The preferential tariff treatment referred to in § 10.231 applies to any of the following articles, provided that the article in question is a CBTPA originating good, is imported directly into the customs territory of the United States from a CBTPA beneficiary country, and is not accorded duty-free treatment under U.S. Note 2(b), Subchapter II, Chapter 98, HTSUS (see § 10.26):<PRTPAGE P="200"/> </P> <P>(1) Footwear not designated on August 5, 1983, as eligible articles for the purpose of the Generalized System of Preferences under Title V, Trade Act of 1974, as amended (19 U.S.C. 2461 through 2467);</P> <P>(2) Tuna, prepared or preserved in any manner, in airtight containers;</P> <P>(3) Petroleum, or any product derived from petroleum, provided for in headings 2709 and 2710 of the HTSUS;</P> <P>(4) Watches and watch parts (including cases, bracelets, and straps), of whatever type including, but not limited to, mechanical, quartz digital or quartz analog, if those watches or watch parts contain any material which is the product of any country with respect to which HTSUS column 2 rates of duty apply; and</P> <P>(5) Articles to which reduced rates of duty apply under § 10.198a, except as otherwise provided in paragraph (c) of this section.</P> <P>(b) <E T="03">Application of NAFTA rules of origin.</E> In determining whether an article is a CBTPA originating good for purposes of paragraph (a) of this section, application of the provisions of General Note 12 of the HTSUS and the appendix to part 181 of this chapter will be subject to the following rules:</P> <P>(1) No country other than the United States and a CBTPA beneficiary country may be treated as being a party to the NAFTA;</P> <P>(2) Any reference to trade between the United States and Mexico will be deemed to refer to trade between the United States and a CBTPA beneficiary country;</P> <P>(3) Any reference to a party will be deemed to refer to a CBTPA beneficiary country or the United States; and</P> <P>(4) Any reference to parties will be deemed to refer to any combination of CBTPA beneficiary countries or to the United States and one or more CBTPA beneficiary countries (or any combination involving the United States and CBTPA beneficiary countries).</P> <P>(c) <E T="03">Duty reductions for leather-related articles.</E> If, after it is determined that an article described in paragraph (a)(5) of this section qualifies as a CBTPA originating good and is eligible for preferential tariff treatment under this section, it is determined that the article in question also would otherwise qualify for a reduced rate of duty under § 10.198a and that reduced rate of duty is lower than the rate of duty that would apply under this section, that lower rate of duty will apply to the article for purposes of preferential tariff treatment under this section.</P> <P>(d) <E T="03">Imported directly defined.</E> For purposes of paragraph (a) of this section, the words “imported directly” mean:</P> <P>(1) Direct shipment from any CBTPA beneficiary country to the United States without passing through the territory of any country that is not a CBTPA beneficiary country;</P> <P>(2) If the shipment is from any CBTPA beneficiary country to the United States through the territory of any country that is not a CBTPA beneficiary country, the articles in the shipment do not enter into the commerce of any country that is not a CBTPA beneficiary country while en route to the United States and the invoices, bills of lading, and other shipping documents show the United States as the final destination; or</P> <P>(3) If the shipment is from any CBTPA beneficiary country to the United States through the territory of any country that is not a CBTPA beneficiary country, and the invoices and other documents do not show the United States as the final destination, the articles in the shipment upon arrival in the United States are imported directly only if they:</P> <P>(i) Remained under the control of the customs authority of the intermediate country;</P> <P>(ii) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the producer's sales agent; and</P> <P>(iii) Were not subjected to operations other than loading or unloading, and other activities necessary to preserve the articles in good condition.</P> </SECTION> <SECTION> <SECTNO>§ 10.234</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <P>A Certificate of Origin as specified in § 10.236 must be employed to certify that an article described in § 10.233(a)(1) through (5) being exported from a <PRTPAGE P="201"/>CBTPA beneficiary country to the United States qualifies for the preferential tariff treatment referred to in § 10.231. The Certificate of Origin must be prepared by the exporter in the CBTPA beneficiary country. Where the CBTPA beneficiary country exporter is not the producer of the article, that exporter may complete and sign a Certificate of Origin on the basis of:</P> <P>(a) Its reasonable reliance on the producer's written representation that the article qualifies for preferential tariff treatment; or</P> <P>(b) A completed and signed Certificate of Origin for the article voluntarily provided to the exporter by the producer.</P> </SECTION> <SECTION> <SECTNO>§ 10.235</SECTNO> <SUBJECT>Filing of claim for preferential tariff treatment.</SUBJECT> <P>(a) <E T="03">Declaration.</E> In connection with a claim for preferential tariff treatment for an article described in § 10.233(a)(1) through (5), the importer must make a written declaration that the article qualifies for that treatment. The written declaration should be made by including on the entry summary, or equivalent documentation, the symbol “R” as a prefix to the subheading of the HTSUS under which the article in question is classified. Except in any of the circumstances described in § 10.236(d)(1), the declaration required under this paragraph must be based on a complete and properly executed original Certificate of Origin that covers the article being imported and that is in the possession of the importer.</P> <P>(b) <E T="03">Corrected declaration.</E> If, after making the declaration required under paragraph (a) of this section, the importer has reason to believe that a Certificate of Origin on which a declaration was based contains information that is not correct, the importer must within 30 calendar days after the date of discovery of the error make a corrected declaration and pay any duties that may be due. A corrected declaration will be effected by submission of a letter or other written statement to the Customs port where the declaration was originally filed.</P> </SECTION> <SECTION> <SECTNO>§ 10.236</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <P>(a) <E T="03">Maintenance of records.</E> Each importer claiming preferential tariff treatment for an article under § 10.235 must maintain in the United States, in accordance with the provisions of part 163 of this chapter, all records relating to the importation of the article. Those records must include the original Certificate of Origin referred to in § 10.235(a) and any other relevant documents or other records as specified in § 163.1(a) of this chapter.</P> <P>(b) <E T="03">Submission of Certificate.</E> An importer who claims preferential tariff treatment on an article under § 10.235(a) must provide, at the request of the port director, a copy of the Certificate of Origin pertaining to the article. A Certificate of Origin submitted to Customs under this paragraph:</P> <P>(1) Must be on Customs Form 450, including privately-printed copies of that Form, or, as an alternative to Customs Form 450, in an approved computerized format or other medium or format as is approved by the Office of Field Operations, U.S. Customs Service, Washington, DC 20229. An alternative format must contain the same information and certification set forth on Customs Form 450;</P> <P>(2) Must be signed by the exporter or by the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(3) Must be completed either in the English language or in the language of the country from which the article is exported. If the Certificate is completed in a language other than English, the importer must provide to Customs upon request a written English translation of the Certificate; and</P> <P>(4) May be applicable to:</P> <P>(i) A single importation of an article into the United States, including a single shipment that results in the filing of one or more entries and a series of shipments that results in the filing of one entry; or</P> <P>(ii) Multiple importations of identical articles into the United States that occur within a specified period, not to exceed 12 months, set out in the Certificate by the exporter.<PRTPAGE P="202"/> </P> <P>(c) <E T="03">Correction and nonacceptance of Certificate.</E> If the port director determines that a Certificate of Origin is illegible or defective or has not been completed in accordance with paragraph (b) of this section, the importer will be given a period of not less than five working days to submit a corrected Certificate. A Certificate will not be accepted in connection with subsequent importations during a period referred to in paragraph (b)(4)(ii) of this section if the port director determined that a previously imported identical article covered by the Certificate did not qualify for preferential treatment.</P> <P>(d) <E T="03">Certificate not required—</E>(1) <E T="03">General.</E> Except as otherwise provided in paragraph (d)(2) of this section, an importer is not required to have a Certificate of Origin in his possession for:</P> <P>(i) An importation of an article for which the port director has in writing waived the requirement for a Certificate of Origin because the port director is otherwise satisfied that the article qualifies for preferential tariff treatment;</P> <P>(ii) A non-commercial importation of an article; or</P> <P>(iii) A commercial importation of an article whose value does not exceed US$2,500, provided that, unless waived by the port director, the producer, exporter, importer or authorized agent includes on, or attaches to, the invoice or other document accompanying the shipment the following signed statement: </P> <EXTRACT> <P>I hereby certify that the article covered by this shipment qualifies for preferential tariff treatment under the CBTPA. </P> <P>Check One:</P> <FP SOURCE="FP-1">() Producer</FP> <FP SOURCE="FP-1">() Exporter</FP> <FP SOURCE="FP-1">() Importer</FP> <FP SOURCE="FP-1">() Agent</FP> <FP SOURCE="FP-DASH"/> <FP>Name</FP> <FP SOURCE="FP-DASH"/> <FP>Title</FP> <FP SOURCE="FP-DASH"/> <FP>Address</FP> <FP SOURCE="FP-DASH"/> <FP>Signature and Date</FP> </EXTRACT> <P>(2) <E T="03">Exception.</E> If the port director determines that an importation described in paragraph (d)(1) of this section forms part of a series of importations that may reasonably be considered to have been undertaken or arranged for the purpose of avoiding a Certificate of Origin requirement under §§ 10.234 through 10.236, the port director will notify the importer in writing that for that importation the importer must have in his possession a valid Certificate of Origin to support the claim for preferential tariff treatment. The importer will have 30 calendar days from the date of the written notice to obtain a valid Certificate of Origin, and a failure to timely obtain the Certificate of Origin will result in denial of the claim for preferential tariff treatment. For purposes of this paragraph, a “series of importations” means two or more entries covering articles arriving on the same day from the same exporter and consigned to the same person.</P> </SECTION> <SECTION> <SECTNO>§ 10.237</SECTNO> <SUBJECT>Verification and justification of claim for preferential tariff treatment.</SUBJECT> <P>(a) <E T="03">Verification by Customs.</E> A claim for preferential tariff treatment made under § 10.235, including any statements or other information contained on a Certificate of Origin submitted to Customs under § 10.236, will be subject to whatever verification the port director deems necessary. In the event that the port director for any reason is prevented from verifying the claim, the port director may deny the claim for preferential tariff treatment. A verification of a claim for preferential tariff treatment may involve, but need not be limited to, a review of:</P> <P>(1) All records required to be made, kept, and made available to Customs by the importer or any other person under part 163 of this chapter;</P> <P>(2) Documentation and other information in a CBTPA beneficiary country regarding the country of origin of an article and its constituent materials, including, but not limited to, production records, information relating to the place of production, the number and identification of the types of machinery used in production, and the number of workers employed in production; and</P> <P>(3) Evidence in a CBTPA beneficiary country to document the use of U.S. <PRTPAGE P="203"/>materials in the production of the article in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents.</P> <P>(b) <E T="03">Importer requirements.</E> In order to make a claim for preferential tariff treatment under § 10.235, the importer:</P> <P>(1) Must have records that explain how the importer came to the conclusion that the article qualifies for preferential tariff treatment. Those records must include documents that support a claim that the article in question qualifies for preferential tariff treatment because it meets the applicable rule of origin set forth in General Note 12, HTSUS, and in the appendix to part 181 of this chapter. A properly completed Certificate of Origin in the form prescribed in § 10.236(b) is a record that would serve this purpose;</P> <P>(2) Must establish and implement internal controls which provide for the periodic review of the accuracy of the Certificate of Origin or other records referred to in paragraph (b)(1) of this section;</P> <P>(3) Must have shipping papers that show how the article moved from the CBTPA beneficiary country to the United States. If the imported article was shipped through a country other than a CBTPA beneficiary country and the invoices and other documents from the CBTPA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.233(d)(3)(i) through (iii) were met; and</P> <P>(4) Must be prepared to explain, upon request from Customs, how the records and internal controls referred to in paragraphs (b)(1) through (b)(3) of this section justify the importer's claim for preferential tariff treatment.</P> </SECTION> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart F—Andean Trade Promotion and Drug Eradication Act</HD> <SUBJGRP> <HD SOURCE="HED">Apparel and Other Textile Articles Under the Andean Trade Promotion and Drug Eradication Act</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Sections 10.241 through 10.248 issued by T.D. 03-16, 68 FR 14487, Mar. 25, 2003; 68 FR 67338, Dec. 1, 2003, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 10.241</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>Title XXXI of Public Law 107-210 (116 Stat. 933), entitled the Andean Trade Promotion and Drug Eradication Act (ATPDEA), amended sections 202, 203, 204, and 208 of the Andean Trade Preference Act (the ATPA, 19 U.S.C. 3201-3206) to authorize the President to extend additional trade benefits to countries that are designated as beneficiary countries under the ATPA. Section 204(b)(3) of the ATPA (19 U.S.C. 3203(b)(3)) provides for the preferential treatment of certain apparel and other textile articles from those ATPA beneficiary countries which the President designates as ATPDEA beneficiary countries. The provisions of §§ 10.241 through 10.248 of this part set forth the legal requirements and procedures that apply for purposes of obtaining preferential treatment pursuant to ATPA section 204(b)(3) and Subchapter XXI, Chapter 98, HTSUS.</P> </SECTION> <SECTION> <SECTNO>§ 10.242</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>When used in §§ 10.241 through 10.248, the following terms have the meanings indicated:</P> <P> <E T="03">Apparel articles.</E> “Apparel articles” means goods classifiable in Chapters 61 and 62 and headings 6501, 6502, 6503, and 6504 and subheadings 6406.99.15 and 6505.90 of the HTSUS.</P> <P> <E T="03">Assembled or sewn or otherwise assembled in one or more ATPDEA beneficiary countries.</E> “Assembled” and “sewn or otherwise assembled” when used in the context of production of an apparel or other textile article in one or more ATPDEA beneficiary countries has reference to a joining together of two or more components that occurred in one or more ATPDEA beneficiary countries, whether or not a prior joining operation was performed on the article or any of its components in the United States.</P> <P> <E T="03">ATPA.</E> “ATPA” means the Andean Trade Preference Act, 19 U.S.C. 3201-3206.</P> <P> <E T="03">ATPDEA beneficiary country.</E> “ATPDEA beneficiary country” means a “beneficiary country” as defined in § 10.202(a) for purposes of the ATPA <PRTPAGE P="204"/>which the President also has designated as a beneficiary country for purposes of preferential treatment of apparel and other textile articles under 19 U.S.C. 3203(b)(3) and which has been the subject of a determination by the President or his designee, published in the <E T="04">Federal Register,</E> that the beneficiary country has satisfied the requirements of 19 U.S.C. 3203(b)(5)(A)(ii).</P> <P> <E T="03">Chief value.</E> “Chief value” when used with reference to llama, alpaca, and vicuña means that the value of those materials exceeds the value of any other single textile material in the fabric or component under consideration, with the value in each case determined by application of the principles set forth in § 10.243(c)(1)(ii).</P> <P> <E T="03">Cut in one or more ATPDEA beneficiary countries.</E> “Cut” when used in the context of production of textile luggage in one or more ATPDEA beneficiary countries means that all fabric components used in the assembly of the article were cut from fabric in one or more ATPDEA beneficiary countries, or were cut from fabric in the United States and used in a partial assembly operation in the United States prior to cutting of fabric and assembly of the article in one or more ATPDEA beneficiary countries, or both.</P> <P> <E T="03">Foreign.</E> “Foreign” means of a country other than the United States or an ATPDEA beneficiary country.</P> <P> <E T="03">HTSUS.</E> “HTSUS” means the Harmonized Tariff Schedule of the United States.</P> <P> <E T="03">Knit-to-shape components.</E> “Knit-to-shape,” when used with reference to textile components, means components that are knitted or crocheted from a yarn directly to a specific shape containing a self-start edge. Minor cutting or trimming will not affect the determination of whether a component is “knit-to-shape.”</P> <P> <E T="03">Luggage.</E> “Luggage” means travel goods (such as trunks, hand trunks, lockers, valises, satchels, suitcases, wardrobe cases, overnight bags, pullman bags, gladstone bags, traveling bags, knapsacks, kitbags, haversacks, duffle bags, and like articles designed to contain clothing or other personal effects during travel) and brief cases, portfolios, school bags, photographic equipment bags, golf bags, camera cases, binocular cases, gun cases, occupational luggage cases (for example, physicians' cases, sample cases), and like containers and cases designed to be carried with the person. The term “luggage” does not include handbags (that is, pocketbooks, purses, shoulder bags, clutch bags, and all similar articles, by whatever name known, customarily carried by women or girls). The term “luggage” also does not include flat goods (that is, small flatware designed to be carried on the person, such as banknote cases, bill cases, billfolds, bill purses, bill rolls, card cases, change cases, cigarette cases, coin purses, coin holders, compacts, currency cases, key cases, letter cases, license cases, money cases, pass cases, passport cases, powder cases, spectacle cases, stamp cases, vanity cases, tobacco pouches, and similar articles).</P> <P> <E T="03">NAFTA.</E> “NAFTA” means the North American Free Trade Agreement entered into by the United States, Canada, and Mexico on December 17, 1992.</P> <P> <E T="03">Preferential treatment.</E> “Preferential treatment” means entry, or withdrawal from warehouse for consumption, in the customs territory of the United States free of duty and free of any quantitative restrictions, limitations, or consultation levels as provided in 19 U.S.C. 3203(b)(3).</P> <P> <E T="03">Wholly formed fabric components.</E> “Wholly formed,” when used with reference to fabric components, means that all of the production processes, starting with the production of wholly formed fabric and ending with a component that is ready for incorporation into an apparel article, took place in a single country.</P> <P> <E T="03">Wholly formed fabrics.</E> “Wholly formed,” when used with reference to fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile strips, yarns, twine, cordage, rope, or strips of fabric and ending with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took place in a single country.</P> <P> <E T="03">Wholly formed yarns.</E> “Wholly formed,” when used with reference to yarns, means that all of the production processes, starting with the extrusion <PRTPAGE P="205"/>of filament, strip, film, or sheet and including drawing to fully orient a filament or slitting a film or sheet into strip, or the spinning of all fibers into yarn, or both, and ending with a yarn or plied yarn, took place in the United States or in one or more ATPDEA beneficiary countries.</P> </SECTION> <SECTION> <SECTNO>§ 10.243</SECTNO> <SUBJECT>Articles eligible for preferential treatment.</SUBJECT> <P>(a) <E T="03">General.</E> Subject to paragraphs (b) and (c) of this section, preferential treatment applies to the following apparel and other textile articles that are imported directly into the customs territory of the United States from an ATPDEA beneficiary country:</P> <P>(1) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries, or in the United States, or in both, exclusively from any one of the following:</P> <P>(i) Fabrics or fabric components wholly formed, or components knit-to-shape, in the United States, from yarns wholly formed in the United States or in one or more ATPDEA beneficiary countries (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are formed in the United States), provided that, if the apparel article is assembled from knitted or crocheted or woven wholly formed fabrics or from knitted or crocheted or woven wholly formed fabric components produced from fabric, all dyeing, printing, and finishing of that knitted or crocheted or woven fabric or component was carried out in the United States;</P> <P>(ii) Fabrics or fabric components formed, or components knit-to-shape, in one or more ATPDEA beneficiary countries from yarns wholly formed in one or more ATPDEA beneficiary countries, if those fabrics (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are formed in one or more ATPDEA beneficiary countries) or components are in chief value of llama, alpaca, and/or vicuña;</P> <P>(iii) Fabrics or yarns, provided that apparel articles (except articles classifiable under subheading 6212.10 of the HTSUS) of those fabrics or yarns would be considered an originating good under General Note 12(t), HTSUS, if the apparel articles had been imported directly from Canada or Mexico; or</P> <P>(iv) Fabrics or yarns that the President or his designee has designated in the <E T="04">Federal Register</E> as fabrics or yarns that cannot be supplied by the domestic industry in commercial quantities in a timely manner;</P> <P>(2) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries, or in the United States, or in both, exclusively from a combination of fabrics, fabric components, knit-to-shape components or yarns described in two or more of paragraphs (a)(1)(i) through (a)(1)(iv) of this section;</P> <P>(3) A handloomed, handmade, or folklore apparel or other textile article of an ATPDEA beneficiary country that the President or his designee and representatives of the ATPDEA beneficiary country mutually agree is a handloomed, handmade, or folklore article and that is certified as a handloomed, handmade, or folklore article by the competent authority of the ATPDEA beneficiary country;</P> <P>(4) Brassieres classifiable under subheading 6212.10 of the HTSUS, if both cut and sewn or otherwise assembled in the United States, or in one or more ATPDEA beneficiary countries, or in both, other than articles entered as articles described in paragraphs (a)(1) through (a)(3) and (a)(7) of this section, and provided that any applicable additional requirements set forth in § 10.248 are met;</P> <P>(5) Textile luggage assembled in an ATPDEA beneficiary country from fabric wholly formed and cut in the United States, from yarns wholly formed in the United States, that is entered under subheading 9802.00.80 of the HTSUS;</P> <P>(6) Textile luggage assembled in one or more ATPDEA beneficiary countries from fabric cut in one or more ATPDEA beneficiary countries from fabric wholly formed in the United States from yarns wholly formed in the United States; and</P> <P>(7) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries from fabrics or from fabric components formed, or from components knit-to-shape, in one <PRTPAGE P="206"/>or more ATPDEA beneficiary countries from yarns wholly formed in the United States or in one or more ATPDEA beneficiary countries (including fabrics not formed from yarns, if those fabrics are classifiable under heading 5602 or 5603 of the HTSUS and are formed in one or more ATPDEA beneficiary countries), including apparel articles sewn or otherwise assembled in part but not exclusively from any of the fabrics, fabric components formed, or components knit-to-shape described in paragraph (a)(1) of this section.</P> <P>(b) <E T="03">Dyeing, printing, finishing and other operations</E>—(1) <E T="03">Dyeing, printing and finishing operations.</E> Dyeing, printing, and finishing operations may be performed on any yarn, fabric, or knit-to-shape or other component used in the production of any article described under paragraph (a) of this section without affecting the eligibility of the article for preferential treatment, provided that the operation is performed in the United States or in an ATPDEA beneficiary country and not in any other country and subject to the following additional conditions:</P> <P>(i) In the case of an article described in paragraph (a)(1), (a)(2), or (a)(7) of this section that contains a knitted or crocheted or woven fabric, or a knitted or crocheted or woven fabric component produced from fabric, that was wholly formed in the United States from yarns wholly formed in the United States, any dyeing, printing, or finishing of that knitted or crocheted or woven fabric or component must have been carried out in the United States; and</P> <P>(ii) In the case of assembled luggage described in paragraph (a)(5) of this section, an operation may be performed in an ATPDEA beneficiary country only if that operation is incidental to the assembly process within the meaning of § 10.16.</P> <P>(2) <E T="03">Other operations.</E> An article described under paragraph (a) of this section that is otherwise eligible for preferential treatment will not be disqualified from receiving that treatment by virtue of having undergone one or more operations such as embroidering, stone-washing, enzyme-washing, acid washing, perma-pressing, oven-baking, bleaching, garment-dyeing or screen printing, provided that the operation is performed in the United States or in an ATPDEA beneficiary country and not in any other country. However, in the case of assembled luggage described in paragraph (a)(5) of this section, an operation may be performed in an ATPDEA beneficiary country without affecting the eligibility of the article for preferential treatment only if it is incidental to the assembly process within the meaning of § 10.16.</P> <P>(c) <E T="03">Special rules for certain component materials</E>—(1) <E T="03">Foreign findings, trimmings, interlinings, and yarns</E>—(i) <E T="03">General.</E> An article otherwise described under paragraph (a) of this section will not be ineligible for the preferential treatment referred to in § 10.241 because the article contains:</P> <P>(A) Findings and trimmings of foreign origin, if the value of those findings and trimmings does not exceed 25 percent of the cost of the components of the assembled article. For purposes of this section “findings and trimmings” include, but are not limited to, sewing thread, hooks and eyes, snaps, buttons, “bow buds,” decorative lace trim, elastic strips, zippers (including zipper tapes), and labels;</P> <P>(B) Interlinings of foreign origin, if the value of those interlinings does not exceed 25 percent of the cost of the components of the assembled article. For purposes of this section “interlinings” include only a chest type plate, a “hymo” piece, or “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made filaments;</P> <P>(C) Any combination of findings and trimmings of foreign origin and interlinings of foreign origin, if the total value of those findings and trimmings and interlinings does not exceed 25 percent of the cost of the components of the assembled article; or</P> <P>(D) Yarns not wholly formed in the United States or in one or more ATPDEA beneficiary countries if the total weight of all those yarns is not more than 7 percent of the total weight of the article.</P> <P>(ii) <E T="03">“Cost” and “value” defined.</E> The “cost” of components and the “value” <PRTPAGE P="207"/>of findings and trimmings or interlinings referred to in paragraph (c)(1)(i) of this section means:</P> <P>(A) The price of the components, findings and trimmings, or interlinings when last purchased, f.o.b. port of exportation, as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(<E T="03">1</E>) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price; or</P> <P>(<E T="03">2</E>) If no exportation to an ATPDEA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the freight, insurance, packing, and other costs incurred in transporting the components, findings and trimmings, or interlinings to the place of production if included in that price; or</P> <P>(B) If the price cannot be determined under paragraph (c)(1)(ii)(A) of this section or if Customs finds that price to be unreasonable, all reasonable expenses incurred in the growth, production, manufacture, or other processing of the components, findings and trimmings, or interlinings, including the cost or value of materials and general expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the components, findings and trimmings, or interlinings to the port of exportation.</P> <P>(iii) <E T="03">Treatment of yarns as findings or trimmings.</E> If any yarns not wholly formed in the United States or one or more ATPDEA beneficiary countries are used in an article as a finding or trimming described in paragraph (c)(1)(i)(A) of this section, the yarns will be considered to be a finding or trimming for purposes of paragraph (c)(1)(i) of this section.</P> <P>(2) <E T="03">Special rule for nylon filament yarn.</E> An article otherwise described under paragraph (a)(1)(i) through (iii), (a)(2), or (a)(7) of this section will not be ineligible for the preferential treatment referred to in § 10.241 because the article contains nylon filament yarn (other than elastomeric yarn) that is classifiable in subheading 5402.10.30, 5402.10.60, 5402.31.30, 5402.31.60, 5402.32.30, 5402.32.60, 5402.41.10, 5402.41.90, 5402.51.00, or 5402.61.00 of the HTSUS and that is entered free of duty from Canada, Mexico, or Israel.</P> <P>(d) <E T="03">Imported directly defined.</E> For purposes of paragraph (a) of this section, the words “imported directly” mean:</P> <P>(1) Direct shipment from any ATPDEA beneficiary country to the United States without passing through the territory of any country that is not an ATPDEA beneficiary country;</P> <P>(2) If the shipment is from any ATPDEA beneficiary country to the United States through the territory of any country that is not an ATPDEA beneficiary country, the articles in the shipment do not enter into the commerce of any country that is not an ATPDEA beneficiary country while en route to the United States and the invoices, bills of lading, and other shipping documents show the United States as the final destination; or</P> <P>(3) If the shipment is from any ATPDEA beneficiary country to the United States through the territory of any country that is not an ATPDEA beneficiary country, and the invoices and other documents do not show the United States as the final destination, the articles in the shipment upon arrival in the United States are imported directly only if they:</P> <P>(i) Remained under the control of the customs authority of the intermediate country;</P> <P>(ii) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the producer's sales agent; and</P> <P>(iii) Were not subjected to operations other than loading or unloading, and other activities necessary to preserve the articles in good condition.</P> </SECTION> <SECTION> <SECTNO>§ 10.244</SECTNO> <SUBJECT>Certificate of Origin.</SUBJECT> <P>(a) <E T="03">General.</E> A Certificate of Origin must be employed to certify that an apparel or other textile article being exported from an ATPDEA beneficiary country to the United States qualifies for the preferential treatment referred to in § 10.241. The Certificate of Origin must be prepared by the exporter in the ATPDEA beneficiary country in <PRTPAGE P="208"/>the format specified in paragraph (b) of this section. Where the ATPDEA beneficiary country exporter is not the producer of the article, that exporter may complete and sign a Certificate of Origin on the basis of:</P> <P>(1) Its reasonable reliance on the producer's written representation that the article qualifies for preferential treatment; or</P> <P>(2) A completed and signed Certificate of Origin for the article voluntarily provided to the exporter by the producer.</P> <P>(b) <E T="03">Form of Certificate.</E> The Certificate of Origin referred to in paragraph (a) of this section must be in the following format: </P> <GPH DEEP="442" SPAN="2"> <PRTPAGE P="209"/> <GID>ER01DE03.016</GID> </GPH> <P>(c) <E T="03">Preparation of Certificate.</E> The following rules will apply for purposes of completing the Certificate of Origin set forth in paragraph (b) of this section:</P> <P>(1) Blocks 1 through 5 pertain only to the final article exported to the United States for which preferential treatment may be claimed;</P> <P>(2) Block 1 should state the legal name and address (including country) of the exporter;</P> <P>(3) Block 2 should state the legal name and address (including country) <PRTPAGE P="210"/>of the producer. If there is more than one producer, attach a list stating the legal name and address (including country) of all additional producers. If this information is confidential, it is acceptable to state “available to Customs upon request” in block 2. If the producer and the exporter are the same, state “same” in block 2;</P> <P>(4) Block 3 should state the legal name and address (including country) of the importer;</P> <P>(5) Block 4 should provide a full description of each article. The description should be sufficient to relate it to the invoice description and to the description of the article in the international Harmonized System. Include the invoice number as shown on the commercial invoice or, if the invoice number is not known, include another unique reference number such as the shipping order number;</P> <P>(6) In block 5, insert the letter that designates the preference group which applies to the article according to the description contained in the CFR provision cited on the Certificate for that group;</P> <P>(7) Blocks 6 through 9 must be completed only when the block in question calls for information that is relevant to the preference group identified in block 5;</P> <P>(8) Block 6 should state the legal name and address (including country) of the fabric producer;</P> <P>(9) Block 7 should state the legal name and address (including country) of the yarn producer;</P> <P>(10) Block 8 should state the name of the folklore article or should state that the article is handloomed or handmade of handloomed fabric;</P> <P>(11) Block 9 should be completed if the article described in block 4 incorporates a fabric or yarn described in preference group C or D and should state the name of the fabric or yarn that has been considered as being in short supply in the NAFTA or that has been designated as not available in commercial quantities in the United States. Block 9 also should be completed if preference group E or I applies to the article described in block 4 and the article incorporates a fabric or yarn described in preference group C or D;</P> <P>(12) Block 10 must contain the signature of the exporter or of the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(13) Block 14 should reflect the date on which the Certificate was completed and signed;</P> <P>(14) Block 15 should be completed if the Certificate is intended to cover multiple shipments of identical articles as described in block 4 that are imported into the United States during a specified period of up to one year (see § 10.246(b)(4)(ii)). The “from” date is the date on which the Certificate became applicable to the article covered by the blanket Certificate (this date may be prior to the date reflected in block 14). The “to” date is the date on which the blanket period expires; and</P> <P>(15) The Certificate may be printed and reproduced locally. If more space is needed to complete the Certificate, attach a continuation sheet.</P> </SECTION> <SECTION> <SECTNO>§ 10.245</SECTNO> <SUBJECT>Filing of claim for preferential treatment.</SUBJECT> <P>(a) <E T="03">Declaration.</E> In connection with a claim for preferential treatment for an apparel or other textile article described in § 10.243, the importer must make a written declaration that the article qualifies for that treatment. The inclusion on the entry summary, or equivalent documentation, of the subheading within Chapter 98 of the HTSUS under which the article is classified will constitute the written declaration. Except in any of the circumstances described in § 10.246(d)(1), the declaration required under this paragraph must be based on a Certificate of Origin that has been completed and properly executed in accordance with § 10.244, that covers the article being imported, and that is in the possession of the importer.</P> <P>(b) <E T="03">Corrected declaration.</E> If, after making the declaration required under paragraph (a) of this section, the importer has reason to believe that a Certificate of Origin on which a declaration was based contains information that is not correct, the importer must within 30 calendar days after the date of discovery of the error make a corrected declaration and pay any duties that may be due. A corrected declaration will be effected by submission of a <PRTPAGE P="211"/>letter or other written statement to the Customs port where the declaration was originally filed.</P> </SECTION> <SECTION> <SECTNO>§ 10.246</SECTNO> <SUBJECT>Maintenance of records and submission of Certificate by importer.</SUBJECT> <P>(a) <E T="03">Maintenance of records.</E> Each importer claiming preferential treatment for an article under § 10.245 must maintain in the United States, in accordance with the provisions of part 163 of this chapter, all records relating to the importation of the article. Those records must include a copy of the Certificate of Origin referred to in § 10.245(a) and any other relevant documents or other records as specified in § 163.1(a) of this chapter.</P> <P>(b) <E T="03">Submission of Certificate.</E> An importer who claims preferential treatment on an apparel or other textile article under § 10.245(a) must provide, at the request of the port director, a copy of the Certificate of Origin pertaining to the article. A Certificate of Origin submitted to Customs under this paragraph:</P> <P>(1) Must be in writing or must be transmitted electronically through any electronic data interchange system authorized by Customs for that purpose;</P> <P>(2) If in writing, must be signed by the exporter or by the exporter's authorized agent having knowledge of the relevant facts;</P> <P>(3) Must be completed either in the English language or in the language of the country from which the article is exported. If the Certificate is completed in a language other than English, the importer must provide to Customs upon request a written English translation of the Certificate; and</P> <P>(4) May be applicable to:</P> <P>(i) A single importation of an article into the United States, including a single shipment that results in the filing of one or more entries and a series of shipments that results in the filing of one entry; or</P> <P>(ii) Multiple importations of identical articles into the United States that occur within a specified blanket period, not to exceed 12 months, set out in the Certificate by the exporter. For purposes of this paragraph and § 10.244(c)(14), “identical articles” means articles that are the same in all material respects, including physical characteristics, quality, and reputation.</P> <P>(c) <E T="03">Correction and nonacceptance of Certificate.</E> If the port director determines that a Certificate of Origin is illegible or defective or has not been completed in accordance with paragraph (b) of this section, the importer will be given a period of not less than five working days to submit a corrected Certificate. A Certificate will not be accepted in connection with subsequent importations during a period referred to in paragraph (b)(4)(ii) of this section if the port director determined that a previously imported identical article covered by the Certificate did not qualify for preferential treatment.</P> <P>(d) <E T="03">Certificate not required</E>—(1) <E T="03">General.</E> Except as otherwise provided in paragraph (d)(2) of this section, an importer is not required to have a Certificate of Origin in his possession for:</P> <P>(i) An importation of an article for which the port director has in writing waived the requirement for a Certificate of Origin because the port director is otherwise satisfied that the article qualifies for preferential treatment;</P> <P>(ii) A non-commercial importation of an article; or</P> <P>(iii) A commercial importation of an article whose value does not exceed US$2,500, provided that, unless waived by the port director, the producer, exporter, importer or authorized agent includes on, or attaches to, the invoice or other document accompanying the shipment the following signed statement: </P> <EXTRACT> <P>I hereby certify that the article covered by this shipment qualifies for preferential treatment under the ATPDEA.</P> <P>Check One: </P> <FP SOURCE="FP-1">() Producer</FP> <FP SOURCE="FP-1">() Exporter</FP> <FP SOURCE="FP-1">() Importer</FP> <FP SOURCE="FP-1">() Agent</FP> <FP>_________________</FP> <FP>Name</FP> <FP>_________________</FP> <FP>Title</FP> <FP>_________________</FP> <FP>Address</FP> <FP>_________________</FP> <FP>Signature and Date</FP> </EXTRACT> <PRTPAGE P="212"/> <P>(2) <E T="03">Exception.</E> If the port director determines that an importation described in paragraph (d)(1) of this section forms part of a series of importations that may reasonably be considered to have been undertaken or arranged for the purpose of avoiding a Certificate of Origin requirement under §§ 10.244 through 10.246, the port director will notify the importer in writing that for that importation the importer must have in his possession a valid Certificate of Origin to support the claim for preferential treatment. The importer will have 30 calendar days from the date of the written notice to obtain a valid Certificate of Origin, and a failure to timely obtain the Certificate of Origin will result in denial of the claim for preferential treatment. For purposes of this paragraph, a “series of importations” means two or more entries covering articles arriving on the same day from the same exporter and consigned to the same person.</P> </SECTION> <SECTION> <SECTNO>§ 10.247</SECTNO> <SUBJECT>Verification and justification of claim for preferential treatment.</SUBJECT> <P>(a) <E T="03">Verification by Customs.</E> A claim for preferential treatment made under § 10.245, including any statements or other information contained on a Certificate of Origin submitted to Customs under § 10.246, will be subject to whatever verification the port director deems necessary. In the event that the port director for any reason is prevented from verifying the claim, the port director may deny the claim for preferential treatment. A verification of a claim for preferential treatment may involve, but need not be limited to, a review of:</P> <P>(1) All records required to be made, kept, and made available to Customs by the importer or any other person under part 163 of this chapter;</P> <P>(2) Documentation and other information regarding the country of origin of an article and its constituent materials, including, but not limited to, production records, information relating to the place of production, the number and identification of the types of machinery used in production, and the number of workers employed in production; and</P> <P>(3) Evidence to document the use of U.S. or ATPDEA beneficiary country materials in the production of the article in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents.</P> <P>(b) <E T="03">Importer requirements.</E> In order to make a claim for preferential treatment under § 10.245, the importer:</P> <P>(1) Must have records that explain how the importer came to the conclusion that the apparel or other textile article qualifies for preferential treatment. Those records must include documents that support a claim that the article in question qualifies for preferential treatment because it is specifically described in one of the provisions under § 10.243(a). If the importer is claiming that the article incorporates fabric or yarn that was wholly formed in the United States or in an ATPDEA beneficiary country, the importer must have records that identify the producer of the fabric or yarn. A properly completed Certificate of Origin in the form set forth in § 10.244(b) is a record that would serve these purposes;</P> <P>(2) Must establish and implement internal controls which provide for the periodic review of the accuracy of the Certificates of Origin or other records referred to in paragraph (b)(1) of this section;</P> <P>(3) Must have shipping papers that show how the article moved from the ATPDEA beneficiary country to the United States. If the imported article was shipped through a country other than an ATPDEA beneficiary country and the invoices and other documents from the ATPDEA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.243(d)(3)(i) through (iii) were met; and</P> <P>(4) Must be prepared to explain, upon request from Customs, how the records and internal controls referred to in paragraphs (b)(1) through (b)(3) of this section justify the importer's claim for preferential treatment.</P> </SECTION> <SECTION> <PRTPAGE P="213"/> <SECTNO>§ 10.248</SECTNO> <SUBJECT>Additional requirements for preferential treatment of brassieres.</SUBJECT> <P>(a) <E T="03">Definitions.</E> When used in this section, the following terms have the meanings indicated:</P> <P>(1) <E T="03">Producer.</E> “Producer” means an individual, corporation, partnership, association, or other entity or group that exercises direct, daily operational control over the production process in an ATPDEA beneficiary country.</P> <P>(2) <E T="03">Entity controlling production.</E> “Entity controlling production” means an individual, corporation, partnership, association, or other entity or group that is not a producer and that controls the production process in an ATPDEA beneficiary country through a contractual relationship or other indirect means.</P> <P>(3) <E T="03">Fabrics formed in the United States.</E> “Fabrics formed in the United States” means fabrics that were produced by a weaving, knitting, needling, tufting, felting, entangling or other fabric-making process performed in the United States.</P> <P>(4) <E T="03">Cost.</E> “Cost” when used with reference to fabrics formed in the United States means:</P> <P>(i) The price of the fabrics when last purchased, f.o.b. port of exportation, as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(A) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price; or</P> <P>(B) If no exportation to an ATPDEA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the freight, insurance, packing, and other costs incurred in transporting the fabrics to the place of production if included in that price; or</P> <P>(ii) If the price cannot be determined under paragraph (a)(4)(i) of this section or if Customs finds that price to be unreasonable, all reasonable expenses incurred in the growth, production, manufacture, or other processing of the fabrics, including the cost or value of materials (which includes the cost of non-recoverable scrap generated in forming the fabrics) and general expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabrics to the port of exportation.</P> <P>(5) <E T="03">Declared customs value.</E> “Declared customs value” when used with reference to fabric contained in an article means the sum of:</P> <P>(i) The cost of fabrics formed in the United States that the producer or entity controlling production can verify; and</P> <P>(ii) The cost of all other fabric contained in the article, exclusive of all findings and trimmings, determined as follows:</P> <P>(A) In the case of fabric purchased by the producer or entity controlling production, the f.o.b. port of exportation price of the fabric as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:</P> <P>(<E T="03">1</E>) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price, plus expenses for embroidering and dyeing, printing, and finishing operations applied to the fabric if not included in that price; or</P> <P>(<E T="03">2</E>) If no exportation to an ATPDEA beneficiary country is involved, the price as set out in the invoice or other commercial documents, plus expenses for embroidering and dyeing, printing, and finishing operations applied to the fabric if not included in that price, but less the freight, insurance, packing, and other costs incurred in transporting the fabric to the place of production if included in that price;</P> <P>(B) In the case of fabric for which the cost cannot be determined under paragraph (a)(5)(ii)(A) of this section or if Customs finds that cost to be unreasonable, all reasonable expenses incurred in the growth, production, or manufacture of the fabric, including the cost or value of materials (which includes the cost of non-recoverable scrap generated in the growth, production, or manufacture of the fabric), general expenses and embroidering and dyeing, printing, and finishing expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabric to the port of exportation;<PRTPAGE P="214"/> </P> <P>(C) In the case of fabric components purchased by the producer or entity controlling production, the f.o.b. port of exportation price of those fabric components as set out in the invoice or other commercial documents, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, or, if the price is other than f.o.b. port of exportation:</P> <P>(<E T="03">1</E>) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify; or</P> <P>(<E T="03">2</E>) If no exportation to an ATPDEA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, and less the freight, insurance, packing, and other costs incurred in transporting the fabric components to the place of production if included in that price; and</P> <P>(D) In the case of fabric components for which a fabric cost cannot be determined under paragraph (a)(5)(ii)(C) of this section or if Customs finds that cost to be unreasonable: all reasonable expenses incurred in the growth, production, or manufacture of the fabric components, including the cost or value of materials (which does not include the cost of recoverable scrap generated in the growth, production, or manufacture of the fabric components) and general expenses, but excluding the cost or value of any non-textile materials, and excluding expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabric components to the port of exportation.</P> <P>(6) <E T="03">Year.</E> “Year” means a 12-month period beginning on October 1 and ending on September 30 but does not include any 12-month period that began prior to October 1, 2002.</P> <P>(7) <E T="03">Entered.</E> “Entered” means entered, or withdrawn from warehouse for consumption, in the customs territory of the United States.</P> <P>(b) <E T="03">Limitations on preferential treatment</E>—(1) <E T="03">General.</E> During the year that begins on October 1, 2003, and during any subsequent year, articles of a producer or an entity controlling production that conform to the production standards set forth in § 10.243(a)(4) will be eligible for preferential treatment only if:</P> <P>(i) The aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.243(a)(4) during the immediately preceding year was at least 75 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.243(a)(4) during that year; or</P> <P>(ii) In a case in which the 75 percent requirement set forth in paragraph (b)(1)(i) of this section was not met during a year and therefore those articles of that producer or that entity controlling production were not eligible for preferential treatment during the following year, the aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.243(a)(4) and that were entered during the immediately preceding year was at least 85 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production <PRTPAGE P="215"/>that conform to the production standards set forth in § 10.243(a)(4) and that were entered during that year; and</P> <P>(iii) In conjunction with the filing of the claim for preferential treatment under § 10.245, the importer records on the entry summary or warehouse withdrawal for consumption (Customs Form 7501, column 34), or its electronic equivalent, the distinct and unique identifier assigned by Customs to the applicable documentation prescribed under paragraph (c) of this section.</P> <P>(2) <E T="03">Rules of application</E>—(i) <E T="03">General.</E> For purposes of paragraphs (b)(1)(i) and (b)(1)(ii) of this section and for purposes of preparing and filing the documentation prescribed in paragraph (c) of this section, the following rules will apply:</P> <P>(A) The articles in question must have been produced in the manner specified in § 10.243(a)(4) and the articles in question must be entered within the same year;</P> <P>(B) Articles that are exported to countries other than the United States and are never entered are not to be considered in determining compliance with the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section;</P> <P>(C) Articles that are entered under an HTSUS subheading other than the HTSUS subheading which pertains to articles described in § 10.243(a)(4) are not to be considered in determining compliance with the 75 percent standard specified in paragraph (b)(1)(i) of this section;</P> <P>(D) For purposes of determining compliance with the 85 percent standard specified in paragraph (b)(1)(ii) of this section, all articles that conform to the production standards set forth in § 10.243(a)(4) must be considered, regardless of the HTSUS subheading under which they were entered;</P> <P>(E) Fabric components and fabrics that constitute findings or trimmings are not to be considered in determining compliance with the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section;</P> <P>(F) Beginning October 1, 2003, in order for articles to be eligible for preferential treatment in a given year, a producer of, or entity controlling production of, those articles must have met the 75 percent standard specified in paragraph (b)(1)(i) of this section during the immediately preceding year. If articles of a producer or entity controlling production fail to meet the 75 percent standard specified in paragraph (b)(1)(i) of this section during a year, articles of that producer or entity controlling production:</P> <P>(<E T="03">1</E>) Will not be eligible for preferential treatment during the following year;</P> <P>(<E T="03">2</E>) Will remain ineligible for preferential treatment until the year that follows a year in which articles of that producer or entity controlling production met the 85 percent standard specified in paragraph (b)(1)(ii) of this section; and</P> <P>(<E T="03">3</E>) After the 85 percent standard specified in paragraph (b)(1)(ii) of this section has been met, will again be subject to the 75 percent standard specified in paragraph (b)(1)(i) of this section during the following year for purposes of determining eligibility for preferential treatment in the next year.</P> <P>(G) A new producer or new entity controlling production, that is, a producer or entity controlling production who did not produce or control production of articles that were entered as articles described in § 10.243(a)(4) during the immediately preceding year, must first establish compliance with the 85 percent standard specified in paragraph (b)(1)(ii) of this section as a prerequisite to preparation of the declaration of compliance referred to in paragraph (c) of this section;</P> <P>(H) A declaration of compliance prepared by a producer or by an entity controlling production must cover all production of that producer or all production that the entity controls for the year in question;</P> <P>(I) A producer would not prepare a declaration of compliance if all of its production is covered by a declaration of compliance prepared by an entity controlling production;</P> <P>(J) In the case of a producer, the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section and the declaration of compliance procedure under paragraph (c) of this section apply to all articles <PRTPAGE P="216"/>of that producer for the year in question, even if some but not all of that production is also covered by a declaration of compliance prepared by an entity controlling production;</P> <P>(K) The U.S. importer does not have to be the producer or the entity controlling production who prepared the declaration of compliance; and</P> <P>(L) The exclusion references regarding findings and trimmings in paragraph (b)(1)(i) and paragraph (b)(1)(ii) of this section apply to all findings and trimmings, whether or not they are of foreign origin.</P> <P>(ii) <E T="03">Examples.</E> The following examples will illustrate application of the principles set forth in paragraph (b)(2)(i) of this section. </P> <EXAMPLE> <HD SOURCE="HED">Example 1.</HD> <P>An ATPDEA beneficiary country producer of articles that meet the production standards specified in § 10.243(a)(4) in the first year sends 50 percent of that production to ATPDEA region markets and the other 50 percent to the U.S. market; the cost of the fabrics formed in the United States equals 100 percent of the value of all of the fabric in the articles sent to the ATPDEA region and 60 percent of the value of all of the fabric in the articles sent to the United States. Although the cost of fabrics formed in the United States is more than 75 percent of the value of all of the fabric used in all of the articles produced, this producer could not prepare a valid declaration of compliance because the articles sent to the United States did not meet the minimum 75 percent standard. </P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 2.</HD> <P>A producer sends to the United States in the first year three shipments of articles that meet the description in § 10.243(a)(4); one of those shipments is entered under the HTSUS subheading that covers articles described in § 10.243(a)(4), the second shipment is entered under the HTSUS subheading that covers articles described in § 10.243(a)(7), and the third shipment is entered under subheading 9802.00.80, HTSUS. In determining whether the minimum 75 percent standard has been met in the first year for purposes of entry of articles under the HTSUS subheading that covers articles described in § 10.243(a)(4) during the following (that is, second) year, consideration must be restricted to the articles in the first shipment and therefore must not include the articles in the second and third shipments. </P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 3.</HD> <P>A producer in the second year begins production of articles that conform to the production standards specified in § 10.243(a)(4); some of those articles are entered in that year under HTSUS subheading 6212.10 and others under HTSUS subheading 9802.00.80 but none are entered in that year under the HTSUS subheading which pertains to articles described in § 10.243(a)(4) because the 75 percent standard had not been met in the preceding (that is, first) year. In this case the 85 percent standard applies, and all of the articles that were entered under the various HTSUS provisions in the second year must be taken into account in determining whether that 85 percent standard has been met. If the 85 percent was met in the aggregate for all of the articles entered in the second year, in the next (that is, third) year articles of that producer may receive preferential treatment under the HTSUS subheading which pertains to articles described in § 10.243(a)(4).</P> </EXAMPLE> <EXAMPLE> <HD SOURCE="HED">Example 4.</HD> <P>An entity controlling production of articles th