<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>27</CFRTITLE>
    <CFRTITLETEXT>Alcohol, Tobacco Products and Firearms</CFRTITLETEXT>
    <VOL>1</VOL>
    <DATE>2007-04-01</DATE>
    <ORIGINALDATE>2007-04-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>LIQUORS</TITLE>
    <GRANULENUM>A</GRANULENUM>
    <HEADING>SUBCHAPTER A</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 27" SEQ="1">Alcohol, Tobacco Products and Firearms</PARENT>
      <PARENT HEADING="CHAPTER I" SEQ="0">ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SUBCHAP TYPE="N">
    <PRTPAGE P="5"/>
    <HD SOURCE="HED">SUBCHAPTER A—LIQUORS</HD>
    <PART>
      <EAR>Pt. 1</EAR>
      <HD SOURCE="HED">PART 1—BASIC PERMIT REQUIREMENTS UNDER THE FEDERAL ALCOHOL ADMINISTRATION ACT, NONINDUSTRIAL USE OF DISTILLED SPIRITS AND WINE, BULK SALES AND BOTTLING OF DISTILLED SPIRITS</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—Scope</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>1.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>1.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <SECTNO>1.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <SECTNO>1.4</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>1.10</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Basic Permits</HD>
          <SUBJGRP>
            <HD SOURCE="HED">When Required</HD>
            <SECTNO>1.20</SECTNO>
            <SUBJECT>Importers.</SUBJECT>
            <SECTNO>1.21</SECTNO>
            <SUBJECT>Domestic producers, rectifiers, blenders, and warehousemen.</SUBJECT>
            <SECTNO>1.22</SECTNO>
            <SUBJECT>Wholesalers.</SUBJECT>
            <SECTNO>1.23</SECTNO>
            <SUBJECT>State agencies.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Persons Entitled to Basic Permits</HD>
            <SECTNO>1.24</SECTNO>
            <SUBJECT>Qualifications of applicants.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Applications for Permits</HD>
            <SECTNO>1.25</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>1.26</SECTNO>
            <SUBJECT>Incomplete or incorrectly executed applications.</SUBJECT>
            <SECTNO>1.27</SECTNO>
            <SUBJECT>Change in ownership, management, or control of the applicant.</SUBJECT>
            <SECTNO>1.29</SECTNO>
            <SUBJECT>Individual plant or premises.</SUBJECT>
            <SECTNO>1.30</SECTNO>
            <SUBJECT>Power of attorney; Form 5000.8 (1534).</SUBJECT>
            <SECTNO>1.31</SECTNO>
            <SUBJECT>Denial of permit applications.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Authorization</HD>
            <SECTNO>1.35</SECTNO>
            <SUBJECT>Authority to issue, amend, deny, suspend, revoke, or annul basic permits.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Amendment and Duration of Basic Permits</HD>
            <SECTNO>1.40</SECTNO>
            <SUBJECT>Change of name.</SUBJECT>
            <SECTNO>1.41</SECTNO>
            <SUBJECT>Change of address.</SUBJECT>
            <SECTNO>1.42</SECTNO>
            <SUBJECT>Change in ownership, management, or control of business.</SUBJECT>
            <SECTNO>1.43</SECTNO>
            <SUBJECT>Duration of permits.</SUBJECT>
            <SECTNO>1.44</SECTNO>
            <SUBJECT>Automatic termination of permits.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Revocation, Suspension, or Annulment of Basic Permits</HD>
            <SECTNO>1.50</SECTNO>
            <SUBJECT>Revocation or suspension.</SUBJECT>
            <SECTNO>1.51</SECTNO>
            <SUBJECT>Annulment.</SUBJECT>
            <SECTNO>1.52</SECTNO>
            <SUBJECT>Disposition of stocks of alcoholic beverages upon revocation, annulment, or automatic termination of basic permit.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Miscellaneous</HD>
            <SECTNO>1.55</SECTNO>
            <SUBJECT>Recalling permits for correction.</SUBJECT>
            <SECTNO>1.56</SECTNO>
            <SUBJECT>Oaths and affirmations.</SUBJECT>
            <SECTNO>1.57</SECTNO>
            <SUBJECT>Procedure.</SUBJECT>
            <SECTNO>1.58</SECTNO>
            <SUBJECT>Filing of permits.</SUBJECT>
            <SECTNO>1.59</SECTNO>
            <SUBJECT>Public information as to applications acted upon.</SUBJECT>
          </SUBJGRP>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart D—Nonindustrial Use of Distilled Spirits and Wine</HD>
          <SUBJGRP>
            <HD SOURCE="HED">Uses Regarded as Industrial</HD>
            <SECTNO>1.60</SECTNO>
            <SUBJECT>Use of distilled spirits.</SUBJECT>
            <SECTNO>1.61</SECTNO>
            <SUBJECT>Use of wine.</SUBJECT>
            <SECTNO>1.62</SECTNO>
            <SUBJECT>Use of distilled spirits or wine for experimental purposes and in manufacture of nonbeverage products.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Uses Classed as Nonindustrial</HD>
            <SECTNO>1.70</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>1.71</SECTNO>
            <SUBJECT>Distilled spirits in containers of a capacity of one gallon or less.</SUBJECT>
          </SUBJGRP>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart E—Bulk Sales and Bottling of Distilled Spirits</HD>
          <SUBJGRP>
            <HD SOURCE="HED">Bulk Sales and Bottling</HD>
            <SECTNO>1.80</SECTNO>
            <SUBJECT>Sales of distilled spirits in bulk.</SUBJECT>
            <SECTNO>1.81</SECTNO>
            <SUBJECT>Importation of distilled spirits in bulk.</SUBJECT>
            <SECTNO>1.82</SECTNO>
            <SUBJECT>Acquiring or receiving distilled spirits in bulk for redistillation, processing, rectification, warehousing, or warehousing and bottling.</SUBJECT>
            <SECTNO>1.83</SECTNO>
            <SUBJECT>Acquiring or receiving distilled spirits in bulk for addition to wine.</SUBJECT>
            <SECTNO>1.84</SECTNO>
            <SUBJECT>Acquisition of distilled spirits in bulk by Government agencies.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Warehouse Receipts</HD>
            <SECTNO>1.90</SECTNO>
            <SUBJECT>Distilled spirits in bulk.</SUBJECT>
            <SECTNO>1.91</SECTNO>
            <SUBJECT>Bottled distilled spirits.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Sales of Distilled Spirits for Industrial Use</HD>
            <SECTNO>1.95</SECTNO>
            <SUBJECT>General.</SUBJECT>
          </SUBJGRP>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>27 U.S.C. 203, 204, 206, 211 unless otherwise noted.</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. ATF-373, 61 FR 26098, May 24, 1996, unless otherwise noted.</P>
      </SOURCE>
      <EDNOTE>
        <HD SOURCE="HED">Editorial Note:</HD>
        <P>Nomenclature changes to part 1 appear by T.D. ATF-463, 66 FR 42733, Aug. 15, 2001.</P>
      </EDNOTE>
      <SUBPART>
        <PRTPAGE P="6"/>
        <HD SOURCE="HED">Subpart A—Scope</HD>
        <SECTION>
          <SECTNO>§ 1.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>(a) The regulations in this part relate to requirements governing the issuance, amendment, denial, revocation, suspension, automatic termination, and annulment of basic permits and the duration of permits, except that the provisions of part 71, Rules of Practice in Permit Proceedings, of this chapter are hereby made applicable to administrative proceedings with respect to the application for, and to the suspension, revocation, or annulment of, basic permits under the Federal Alcohol Administration Act.</P>
          <P>(b) The regulations in this part also specify what uses of distilled spirits and wine are “nonindustrial,” as that term is used in section 117 of the Federal Alcohol Administration Act (27 U.S.C. 211). Finally, this part, in accordance with section 106 of the Federal Alcohol Administration Act (27 U.S.C. 206), contains the substantive requirements relative to bulk sales and bottling of distilled spirits under the Federal Alcohol Administration Act, including the terms of warehouse receipts for distilled spirits in bulk. No procedural requirements are prescribed.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 1.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <P>The provisions of this part are applicable to the several States of the United States, the District of Columbia and Puerto Rico.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 1.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <P>(a) The appropriate TTB officer is authorized to prescribe all forms required by this part. All of the information called for in each form shall be furnished as indicated by the headings on the form and the instructions on or pertaining to the form. In addition, information called for in each form shall be furnished as required by this part. The form will be filed in accordance with the instructions for the form.</P>

          <P>(b) Forms prescribed by this part are available for printing through the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996, as amended by T.D. ATF-416, 64 FR 49985, Sept. 15, 1999; T.D. TTB-44, 71 FR 16920, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 1.4</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>

          <P>Most of the regulatory authorities of the Administrator contained in this part are delegated to appropriate TTB officers. These TTB officers are specified in TTB Order 1135.1, Delegation of the Administrator's Authorities in 27 CFR Part 1, Basic Permit Requirements Under the Federal Alcohol Administration Act, Nonindustrial Use of Distilled Spirits and Wine, Bulk Sales and Bottling of Distilled Spirits. You may obtain a copy of this order by accessing the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. TTB-44, 71 FR 16920, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 1.10</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>As used in this part, unless the context otherwise requires, terms shall have the meaning ascribed in this part.</P>
          <P>
            <E T="03">Act.</E> The Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">Alcohol.</E> Ethyl alcohol distilled at or above 190° proof.</P>
          <P>
            <E T="03">Applicant.</E> Any person who has filed an application for a basic permit under the Federal Alcohol Administration Act with the appropriate TTB officer.</P>
          <P>
            <E T="03">Appropriate TTB officer.</E> An officer or employee of the Alcohol and Tobacco Tax and Trade Bureau (TTB) authorized to perform any functions relating to the administration or enforcement of this part by TTB Order 1135.1, Delegation of the Administrator's Authorities in 27 CFR Part 1, Basic Permit Requirements Under the Federal Alcohol Administration Act, Nonindustrial Use of Distilled Spirits and Wine, Bulk Sales and Bottling of Distilled Spirits.<PRTPAGE P="7"/>
          </P>
          <P>
            <E T="03">Basic permit.</E> A document issued under the Act authorizing a person to engage in activities at a particular location.</P>
          <P>
            <E T="03">Brandy.</E> Brandy or wine spirits for addition to wines as permitted by internal revenue law.</P>
          <P>
            <E T="03">Distilled spirits.</E> Section 117(a) of the Federal Alcohol Administration Act (27 U.S.C. 211(a)) defines “distilled spirits” as ethyl alcohol, hydrated oxide of ethyl, spirits of wine, whiskey, rum, brandy, gin, and other distilled spirits, including all dilutions and mixtures thereof for nonindustrial use.</P>
          <P>
            <E T="03">In bulk.</E> Distilled spirits in containers having a capacity in excess of one wine gallon.</P>
          <P>
            <E T="03">Other term.</E> Any other term defined in the Federal Alcohol Administration Act and used in this part shall have the same meaning assigned to it by the Act.</P>
          <P>
            <E T="03">Permittee.</E> Any person holding a basic permit issued under the Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Person.</E> Any individual, partnership, joint-stock company, business trust, association, corporation, or other form of business enterprise, including a receiver, trustee, or liquidating agent.</P>
          <P>
            <E T="03">Resale at wholesale.</E> A sale to any trade buyer.</P>
          <P>
            <E T="03">Trade buyer.</E> Any person who is a wholesaler or retailer of distilled spirits, wine, or malt beverages.</P>
          <P>
            <E T="03">Wine.</E> Section 117(a) of the Federal Alcohol Administration Act (27 U.S.C. 211(a)) defines “wine” as:</P>
          <P>(a) Wine as defined in section 610 and section 617 of the Revenue Act of 1918 (26 U.S.C. 5381-5392), as now in force or hereafter amended, and</P>
          <P>(b) Other alcoholic beverages not so defined, but made in the manner of wine, including sparkling and carbonated wine, wine made from condensed grape must, wine made from other agricultural products than the juice of sound, ripe grapes, imitation wine, compounds sold as wine, vermouth, cider, perry, and sake; in each instance, only if containing not less than 7 percent and not more than 24 percent of alcohol by volume, and if for nonindustrial use.</P>
          <P>
            <E T="03">Wine gallon.</E> The liquid measure equivalent to the volume of 231 cubic inches.</P>
          <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996. Redesignated and amended by T.D. ATF-416, 64 FR 49985, Sept. 15, 1999; T.D. TTB-44, 71 FR 16920, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Basic Permits</HD>
        <EDNOTE>
          <HD SOURCE="HED">Editorial Note:</HD>
          <P>Nomenclature changes to subpart C appear by T.D. ATF-416, 64 FR 49985, Sept. 15, 1999.</P>
        </EDNOTE>
        <SUBJGRP>
          <HD SOURCE="HED">When Required</HD>
          <SECTION>
            <SECTNO>§ 1.20</SECTNO>
            <SUBJECT>Importers.</SUBJECT>
            <P>No person, except pursuant to a basic permit issued under the Act, shall:</P>
            <P>(a) Engage in the business of importing into the United States distilled spirits, wine, or malt beverages; or</P>
            <P>(b) While so engaged, sell, offer or deliver for sale, contract to sell, or ship, in interstate or foreign commerce, directly or indirectly or through an affiliate, distilled spirits, wine, or malt beverages so imported.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.21</SECTNO>
            <SUBJECT>Domestic producers, rectifiers, blenders, and warehousemen.</SUBJECT>
            <P>No person, except pursuant to a basic permit issued under the Act, shall:</P>
            <P>(a) Engage in the business of distilling distilled spirits, producing wine, rectifying or blending distilled spirits or wine, or bottling, or warehousing and bottling, distilled spirits; or</P>
            <P>(b) While so engaged, sell, offer or deliver for sale, contract to sell, or ship, in interstate or foreign commerce, directly or indirectly or through an affiliate, distilled spirits or wine so distilled, produced, rectified, blended, or bottled, or warehoused and bottled.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.22</SECTNO>
            <SUBJECT>Wholesalers.</SUBJECT>
            <P>No person, except pursuant to a basic permit issued under the Act, shall:</P>
            <P>(a) Engage in the business of purchasing for resale at wholesale, distilled spirits, wine, or malt beverages; or,</P>
            <P>(b) While so engaged, receive, sell, offer or deliver for sale, contract to sell, or ship in interstate or foreign commerce, directly or indirectly or through an affiliate, distilled spirits, wine, or malt beverages so purchased.</P>
          </SECTION>
          <SECTION>
            <PRTPAGE P="8"/>
            <SECTNO>§ 1.23</SECTNO>
            <SUBJECT>State agencies.</SUBJECT>
            <P>This subpart shall not apply to any agency of a State or political subdivision thereof or to any officer or employee of any such agency, and no such agency or officer or employee thereof shall be required to obtain a basic permit under this subpart.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Persons Entitled to Basic Permits</HD>
          <SECTION>
            <SECTNO>§ 1.24</SECTNO>
            <SUBJECT>Qualifications of applicants.</SUBJECT>
            <P>The application of any person shall be granted and the permit issued by the appropriate TTB officer if the applicant proves to the satisfaction of the appropriate TTB officer that:</P>
            <P>(a) Such person (or in case of a corporation, any of its officers, directors, or principal stockholders) has not, within 5 years prior to the date of application, been convicted of a felony under Federal or State law, and has not, within 3 years prior to date of application, been convicted of a misdemeanor under any Federal law relating to liquor, including the taxation thereof; and</P>
            <P>(b) Such person, by reason of the person's business experience, financial standing or trade connections, is likely to commence operations as a distiller, warehouseman and bottler, rectifier, wine producer, wine blender, importer, or wholesaler, as the case may be, within a reasonable period and to maintain such operations in conformity with Federal law; and</P>
            <P>(c) The operations proposed to be conducted by such person are not in violation of the law of the State in which they are to be conducted.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Applications for Permits</HD>
          <SECTION>
            <SECTNO>§ 1.25</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>Applications for basic permits to engage in any of the operations set forth in §§ 1.20 to 1.22 must be made on TTB Form 5100.24, or 5100.18, verified as required by § 1.56, and will be accompanied by such affidavits, documents, and other supporting data, as the appropriate TTB officer may require. The application will include all data, written statements, affidavits, documents, or other evidence submitted in support of the application, or upon a hearing.</P>
            <CITA>[T.D. ATF-416, 64 FR 49985, Sept. 15, 1999; T.D. ATF-416a, 64 FR 54776, Oct. 8, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.26</SECTNO>
            <SUBJECT>Incomplete or incorrectly executed applications.</SUBJECT>
            <P>Incomplete or incorrectly executed applications will not be acted upon, but the applicant shall be entitled to file a new application without prejudice, or to complete the application already filed.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.27</SECTNO>
            <SUBJECT>Change in ownership, management, or control of the applicant.</SUBJECT>
            <P>In the event of any change in the ownership, management, or control of the applicant (in case of a corporation, any change in the officers, directors, or persons holding more than 10 percent of the corporate stock), after the date of filing of any application for a basic permit and prior to final action on such application, the applicant shall notify the appropriate TTB officer immediately of such change.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.29</SECTNO>
            <SUBJECT>Individual plant or premises.</SUBJECT>
            <P>An application for a basic permit must be filed, and permit issued, to cover each individual plant or premises where any of the businesses specified in section 103 of the Act is engaged in.</P>
            <CITA>[T.D. ATF-416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.30</SECTNO>
            <SUBJECT>Power of attorney; Form 5000.8 (1534).</SUBJECT>

            <P>If the application and other documents in support of such application are signed by an attorney in fact of an individual, partnership, association, or corporation, or by one of the members of a copartnership or association, or, in the case of a corporation by an officer or other person not authorized by the corporation's bylaws or by its board of directors to sign such applications and supporting documents, the applications must be supported by a duly authenticated copy of the power of attorney conferring authority upon the person signing the documents to execute the <PRTPAGE P="9"/>same. Such powers of attorney will be executed on Form 5000.8 (1534).</P>
            <APPRO>(Approved by the Office of Management and Budget under control number 1512-0079)</APPRO>
            <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996, as amended by T.D. ATF-416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.31</SECTNO>
            <SUBJECT>Denial of permit applications.</SUBJECT>
            <P>If, upon examination of any application for a basic permit, the appropriate TTB officer has reason to believe that the applicant is not entitled to such a permit, the appropriate TTB officer shall institute proceedings for the denial of the application in accordance with the procedure set forth in part 71 of this chapter.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Authorization</HD>
          <SECTION>
            <SECTNO>§ 1.35</SECTNO>
            <SUBJECT>Authority to issue, amend, deny, suspend, revoke, or annul basic permits.</SUBJECT>
            <P>The authority and power of issuing, amending, or denying basic permits, or amendments thereof, is conferred upon the appropriate TTB officer except as to agency initiated curtailment. The Administrator, upon consideration of appeals on petitions for review in part 71 of this chapter, may order the appropriate TTB officer to issue, deny, suspend, revoke, or annul basic permits.</P>
            <CITA>[T.D. ATF-416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Amendment and Duration of Basic Permits</HD>
          <SECTION>
            <SECTNO>§ 1.40</SECTNO>
            <SUBJECT>Change of name.</SUBJECT>
            <P>In the event of any change in the name (trade or corporate name) of a permittee, or, in the event a permittee desires to engage in operations under an additional trade name, such permittee must file application Form 5100.18 for an amended basic permit, which application must be approved, and amended permit issued, before operations may be commenced under the new name.</P>
            <APPRO>(Approved by the Office of Management and Budget under control number 1512-0090)</APPRO>
            <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996, as amended by T.D. ATF- 416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.41</SECTNO>
            <SUBJECT>Change of address.</SUBJECT>
            <P>In the event of a change in address the permittee must file application Form 5100.18 for an amended basic permit.</P>
            <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996, as amended by T.D. ATF- 416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.42</SECTNO>
            <SUBJECT>Change in ownership, management, or control of business.</SUBJECT>
            <P>In the event of any change in the ownership, management, or control of any business operated pursuant to a basic permit (if the permittee is a corporation, if any change occurs in the officers, directors, or persons owning or controlling more than 10 percent of the voting stock of said corporation) the permittee shall immediately notify the appropriate TTB officer of such change, giving the names and addresses of all new persons participating in the ownership, management, or control of such business, or in the case of a corporation, the names and addresses of such new officers, directors, or persons owning or controlling more than 10 percent of the voting stock. Notice to the appropriate TTB officer of any such change shall be accompanied or supplemented by such data in reference to the personal or business history of such persons as the appropriate TTB officer may require.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.43</SECTNO>
            <SUBJECT>Duration of permits.</SUBJECT>
            <P>A basic permit shall continue in effect until suspended, revoked, annulled, voluntarily surrendered, or automatically terminated, as provided in the Act and in this part.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.44</SECTNO>
            <SUBJECT>Automatic termination of permits.</SUBJECT>

            <P>No basic permit shall be leased, sold, or otherwise voluntarily transferred, and, in the event of such lease, sale, or other voluntary transfer, such basic permit shall automatically terminate thereupon. If any basic permit is transferred by operation of law or if actual or legal control of the permittee is acquired, directly or indirectly whether by stock ownership or in any other manner, by any person, then such permit shall be automatically terminated at the expiration of 30 days thereafter: <PRTPAGE P="10"/>Provided, That if within such 30-day period application for a new basic permit is made by the transferee or permittee, respectively, then the outstanding basic permit shall continue in effect until such time as the application is finally acted upon.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Revocation, Suspension, or Annulment of Basic Permits</HD>
          <SECTION>
            <SECTNO>§ 1.50</SECTNO>
            <SUBJECT>Revocation or suspension.</SUBJECT>
            <P>Whenever the appropriate TTB officer has reason to believe that any permittee has willfully violated any of the conditions of the permittee's basic permit or has not engaged in the operations authorized by the permit for a period of more than two years, the appropriate TTB officer shall institute proceedings for the revocation or suspension of such permit, in accordance with the procedure set forth in part 71 of this chapter, which part is made applicable to such proceedings.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.51</SECTNO>
            <SUBJECT>Annulment.</SUBJECT>
            <P>Whenever the appropriate TTB officer has reason to believe that any basic permit was procured through fraud, or misrepresentation or concealment of material fact, the appropriate TTB officer shall institute proceedings for the annulment of such permit in accordance with the procedure set forth in part 71 of this chapter, which part is made applicable to such proceedings.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.52</SECTNO>
            <SUBJECT>Disposition of stocks of alcoholic beverages upon revocation, annulment, or automatic termination of basic permit.</SUBJECT>
            <P>In the event of the revocation or annulment of a basic permit, pursuant to part 71 of this chapter, or in the event such permit is automatically terminated by operation of law (27 U.S.C. 204(g) and § 1.44 of this part), the appropriate TTB officer may authorize the orderly disposition of stocks of distilled spirits, wines, or malt beverages then held by the permittee or former permittee upon such conditions as may be considered proper.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Miscellaneous</HD>
          <SECTION>
            <SECTNO>§ 1.55</SECTNO>
            <SUBJECT>Recalling permits for correction.</SUBJECT>
            <P>Whenever it shall be discovered that any basic permit has been issued authorizing acts, or combinations of acts, which may not properly, under the law and regulations, as of now or hereafter in force, be authorized, or that any material mistake has occurred in the issuance thereof, the holder of such permit shall forthwith surrender the same for correction or amendment upon demand of the appropriate TTB officer.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.56</SECTNO>
            <SUBJECT>Oaths and affirmations.</SUBJECT>
            <P>A document must be verified by an oath or affirmation taken before a person authorized by the laws of the United States or by State or local law to administer oaths or affirmations in the jurisdiction where the document is executed when required by:</P>
            <P>(a) Regulation; or</P>
            <P>(b) An appropriate TTB officer.</P>
            <CITA>[T.D. ATF-416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.57</SECTNO>
            <SUBJECT>Procedure.</SUBJECT>
            <P>The procedures prescribed by the rules of practice in permit proceedings (part 71 of this chapter) are applicable to administrative proceedings for the issuance, amendment, denial, revocation, suspension, or annulment of basic permits, the issuance of subpoenas and the taking of depositions under the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.58</SECTNO>
            <SUBJECT>Filing of permits.</SUBJECT>
            <P>Every person receiving a basic permit under the provisions of this part must file the same, at the place of business covered by the basic permit, so that it may be examined by appropriate TTB officers.</P>
            <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996, as amended by T.D. ATF-416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.59</SECTNO>
            <SUBJECT>Public information as to applications acted upon.</SUBJECT>
            <P>The appropriate TTB officer shall cause to be maintained currently in the appropriate TTB officer's office for public inspection, until the expiration of one year following final action on the application, the following information with respect to each application for basic permit filed:</P>

            <P>(a) The name, including trade name or names, if any, and the address of the applicant; the kind of permit applied <PRTPAGE P="11"/>for and the location of the business; whether the applicant is an individual, a partnership or a corporation; if a partnership, the name and address of each partner; if a corporation, the name and address of each of the principal officers and of each stockholder owning 10 percent or more of the corporate stock.</P>
            <P>(b) The time and place set for any hearing on the application.</P>
            <P>(c) The final action taken on the application. In the event a hearing is held upon an application for a basic permit, the appropriate TTB officer shall make available for inspection at the appropriate TTB officer's office, upon request therefor: The transcript of the hearing, a copy of the administrative law judge's recommended decision, a copy of the appropriate TTB officer's decision and, in the event of an appeal to the Administrator, the decision on appeal with the reasons given in support thereof.</P>
            <CITA>[T.D. ATF-373, 61 FR 26098, May 24, 1996, as amended by T.D. ATF-416, 64 FR 49985, Sept. 15, 1999]</CITA>
          </SECTION>
        </SUBJGRP>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart D—Nonindustrial Use of Distilled Spirits and Wine</HD>
        <SUBJGRP>
          <HD SOURCE="HED">Uses Regarded as Industrial</HD>
          <SECTION>
            <SECTNO>§ 1.60</SECTNO>
            <SUBJECT>Use of distilled spirits.</SUBJECT>
            <P>The following uses of distilled spirits are regarded as “industrial” and will be excluded from any application of the term “nonindustrial use.” The use of distilled spirits:</P>
            <P>(a) Free of tax by, and for the use of, the United States or any governmental agency thereof, any State, any political subdivision of a State, or the District of Columbia, for nonbeverage purposes; or</P>
            <P>(b) Free of tax for nonbeverage purposes and not for resale or use in the manufacture of any product for sale:</P>
            <P>(1) For the use of any educational organization described in 26 U.S.C. 170(b)(1)(A)(ii) which is exempt from income tax under 26 U.S.C. 501(a), or for the use of any scientific university or college of learning;</P>
            <P>(2) For any laboratory for use exclusively in scientific research;</P>
            <P>(3) For use at any hospital, blood bank, or sanitarium (including use in making analysis or test at such hospital, blood bank, or sanitarium), or at any pathological laboratory exclusively engaged in making analyses, or tests, for hospitals or sanitariums; or</P>
            <P>(4) For the use of any clinic operated for charity and not for profit (including use in compounding of bona fide medicines for treatment outside of such clinics of patients thereof); or</P>
            <P>(c) Free of tax, after denaturation of such spirits in the manner prescribed by law for:</P>
            <P>(1) Use in the manufacture of ether, chloroform, or other definite chemical substance where such distilled spirits are changed into some other chemical substance and do not appear in the finished product; or</P>
            <P>(2) Any other use in the arts and industries (except for uses prohibited by 26 U.S.C. 5273 (b) or (d)) and for fuel, light, and power.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.61</SECTNO>
            <SUBJECT>Use of wine.</SUBJECT>
            <P>The following uses of wine are regarded as “industrial” and will be excluded from any application of the term “nonindustrial”. The use of wine:</P>
            <P>(a) Without payment of tax for use in the production of vinegar; or</P>
            <P>(b) Free of tax for experimental or research purposes by any scientific university, college of learning, or institution of scientific research; or</P>
            <P>(c) Free of tax for use by the United States or any agency thereof, and for use for analysis, testing, research, or experimentation by the governments of the several States and the District of Columbia or of any political subdivision thereof or by any agency of such governments; or</P>
            <P>(d) Which has been rendered unfit for beverage use.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.62</SECTNO>
            <SUBJECT>Use of distilled spirits or wine for experimental purposes and in manufacture of nonbeverage products.</SUBJECT>

            <P>The use of distilled spirits or wine for experimental purposes and in the manufacture of (a) medicinal, pharmaceutical, or antiseptic products, including prescriptions compounded by retail druggists; (b) toilet preparations; (c) flavoring extracts, syrups, or food products; or (d) scientific, chemical, mechanical, or industrial products, <PRTPAGE P="12"/>provided such products are unfit for beverage use, is regarded as “industrial,” and will be excluded from any application of the term “nonindustrial use.”</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Uses Classed as Nonindustrial</HD>
          <SECTION>
            <SECTNO>§ 1.70</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>All uses of distilled spirits and wines, except as provided in §§ 1.60, 1.61, and 1.62 of this part, are regarded as “nonindustrial.” Such “nonindustrial” use shall include, but not be limited to, distilled spirits or wine used for beverage purposes, or in the manufacture, rectification, or blending of alcoholic beverages; or in the preparation of food or drink by a hotel, restaurant, tavern, or similar establishment; or for sacramental purposes; or as a medicine.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.71</SECTNO>
            <SUBJECT>Distilled spirits in containers of a capacity of one gallon or less.</SUBJECT>
            <P>Distilled spirits in containers of a capacity of one wine gallon or less, except anhydrous alcohol and alcohol which may be withdrawn free of tax under the internal revenue laws, will be deemed to be for nonindustrial use.</P>
          </SECTION>
        </SUBJGRP>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart E—Bulk Sales and Bottling of Distilled Spirits</HD>
        <SUBJGRP>
          <HD SOURCE="HED">Bulk Sales and Bottling</HD>
          <SECTION>
            <SECTNO>§ 1.80</SECTNO>
            <SUBJECT>Sales of distilled spirits in bulk.</SUBJECT>
            <P>It is unlawful for any person to sell, offer to sell, contract to sell, or otherwise dispose of distilled spirits in bulk, for nonindustrial use, except for export or to the classes of persons enumerated in §§ 1.82, 1.83, and 1.84.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.81</SECTNO>
            <SUBJECT>Importation of distilled spirits in bulk.</SUBJECT>
            <P>It is unlawful for any person to import distilled spirits in bulk, for nonindustrial use, except for sale to or for use by the classes of persons enumerated in §§ 1.82, 1.83 and 1.84.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.82</SECTNO>
            <SUBJECT>Acquiring or receiving distilled spirits in bulk for redistillation, processing, rectification, warehousing, or warehousing and bottling.</SUBJECT>
            <P>(a) <E T="03">Proprietors of distilled spirits plants.</E> Persons holding basic permits (issued under subpart B of this part) authorizing the distilling, processing, rectifying, or warehousing and bottling of distilled spirits, or operating permits (issued under § 19.157 and succeeding sections of this chapter) may acquire or receive in bulk and redistill, warehouse, or process distilled spirits, so far as permitted by law.</P>
            <P>(b) <E T="03">Proprietors of class 8 customs bonded warehouses.</E> If the permittee operates a class 8 customs bonded warehouse, the permittee may acquire or receive in bulk, and warehouse and bottle, imported distilled spirits, so far as permitted by the customs laws.</P>
            <SECAUTH>(26 U.S.C. 7805 (68A Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.83</SECTNO>
            <SUBJECT>Acquiring or receiving distilled spirits in bulk for addition to wine.</SUBJECT>
            <P>Persons holding permits as producers and blenders of wine, may, pursuant to such permit, acquire or receive in bulk alcohol or brandy for addition to wines.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.84</SECTNO>
            <SUBJECT>Acquisition of distilled spirits in bulk by Government agencies.</SUBJECT>
            <P>Any agency of the United States, or of any State or political subdivision thereof, may acquire or receive in bulk, and warehouse and bottle, imported and domestic distilled spirits in conformity with the internal revenue laws.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Warehouse Receipts</HD>
          <SECTION>
            <SECTNO>§ 1.90</SECTNO>
            <SUBJECT>Distilled spirits in bulk.</SUBJECT>
            <P>By the terms of the Act (27 U.S.C. 206), all warehouse receipts for distilled spirits in bulk must require that the warehouseman shall package such distilled spirits, before delivery, in bottles labeled and marked in accordance with law, or deliver such distilled spirits in bulk only to persons to whom it is lawful to sell or otherwise dispose of distilled spirits in bulk.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 1.91</SECTNO>
            <SUBJECT>Bottled distilled spirits.</SUBJECT>
            <P>The provisions of the Act, which forbid any person to sell, offer to sell, contract to sell, or otherwise dispose of warehouse receipts for distilled spirits in bulk, do not apply to warehouse receipts for bottled distilled spirits.</P>
            <CROSSREF>
              <HD SOURCE="HED">Cross Reference:</HD>
              <P>For labeling of distilled spirits, see part 5 of this chapter.</P>
            </CROSSREF>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <PRTPAGE P="13"/>
          <HD SOURCE="HED">Sales of Distilled Spirits for Industrial Use</HD>
          <SECTION>
            <SECTNO>§ 1.95</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>Distillers, rectifiers, and other permittees engaged in the sale or other disposition of distilled spirits for nonindustrial use shall not sell or otherwise dispose of distilled spirits in bulk (other than alcohol) for industrial use, unless such distilled spirits are shipped or delivered directly to the industrial user thereof.</P>
          </SECTION>
        </SUBJGRP>
      </SUBPART>
    </PART>
    <PART>
      <EAR>Pt. 4</EAR>
      <HD SOURCE="HED">PART 4—LABELING AND ADVERTISING OF WINE</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—Scope</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>4.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>4.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <SECTNO>4.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <SECTNO>4.4</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>
          <SECTNO>4.5</SECTNO>
          <SUBJECT>Related regulations.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>4.10</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Standards of Identity for Wine</HD>
          <SECTNO>4.20</SECTNO>
          <SUBJECT>Application of standards.</SUBJECT>
          <SECTNO>4.21</SECTNO>
          <SUBJECT>The standards of identity.</SUBJECT>
          <SECTNO>4.22</SECTNO>
          <SUBJECT>Blends, cellar treatment, alteration of class or type.</SUBJECT>
          <SECTNO>4.23</SECTNO>
          <SUBJECT>Varietal (grape type) labeling.</SUBJECT>
          <SECTNO>4.24</SECTNO>
          <SUBJECT>Generic, semi-generic, and non-generic designations of geographic significance.</SUBJECT>
          <SECTNO>4.25</SECTNO>
          <SUBJECT>Appellations of origin.</SUBJECT>
          <SECTNO>4.26</SECTNO>
          <SUBJECT>Estate bottled.</SUBJECT>
          <SECTNO>4.27</SECTNO>
          <SUBJECT>Vintage wine.</SUBJECT>
          <SECTNO>4.28</SECTNO>
          <SUBJECT>Type designations of varietal significance.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart D—Labeling Requirements for Wine</HD>
          <SECTNO>4.30</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>4.32</SECTNO>
          <SUBJECT>Mandatory label information.</SUBJECT>
          <SECTNO>4.32a</SECTNO>
          <SUBJECT>Voluntary disclosure of major food allergens.</SUBJECT>
          <SECTNO>4.32b</SECTNO>
          <SUBJECT>Petitions for exemption from major food allergen labeling.</SUBJECT>
          <SECTNO>4.33</SECTNO>
          <SUBJECT>Brand names.</SUBJECT>
          <SECTNO>4.34</SECTNO>
          <SUBJECT>Class and type.</SUBJECT>
          <SECTNO>4.35</SECTNO>
          <SUBJECT>Name and address.</SUBJECT>
          <SECTNO>4.36</SECTNO>
          <SUBJECT>Alcoholic content.</SUBJECT>
          <SECTNO>4.37</SECTNO>
          <SUBJECT>Net contents.</SUBJECT>
          <SECTNO>4.38</SECTNO>
          <SUBJECT>General requirements.</SUBJECT>
          <SECTNO>4.38a</SECTNO>
          <SUBJECT> Bottle cartons, booklets and leaflets.</SUBJECT>
          <SECTNO>4.39</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart E—Requirements for Withdrawal of Wine From Customs Custody</HD>
          <SECTNO>4.40</SECTNO>
          <SUBJECT>Label approval and release.</SUBJECT>
          <SECTNO>4.45</SECTNO>
          <SUBJECT>Certificates of origin, identity and proper cellar treatment.</SUBJECT>
          <SECTNO>4.46</SECTNO>
          <SUBJECT>Certificate of nonstandard fill.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart F—Requirements for Approval of Labels of Wine Domestically Bottled or Packed</HD>
          <SECTNO>4.50</SECTNO>
          <SUBJECT>Certificates of label approval.</SUBJECT>
          <SECTNO>4.51</SECTNO>
          <SUBJECT>Exhibiting certificates to Government officials.</SUBJECT>
          <SECTNO>4.52</SECTNO>
          <SUBJECT>Photoprints.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart G—Advertising of Wine</HD>
          <SECTNO>4.60</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>4.61</SECTNO>
          <SUBJECT>Definitions.</SUBJECT>
          <SECTNO>4.62</SECTNO>
          <SUBJECT>Mandatory statements.</SUBJECT>
          <SECTNO>4.63</SECTNO>
          <SUBJECT>Legibility of mandatory information.</SUBJECT>
          <SECTNO>4.64</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <SECTNO>4.65</SECTNO>
          <SUBJECT>Comparative advertising.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart H—Standards of Fill for Wine</HD>
          <SECTNO>4.70</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>4.71</SECTNO>
          <SUBJECT>Standard wine containers.</SUBJECT>
          <SECTNO>4.72</SECTNO>
          <SUBJECT>Metric standards of fill.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart I—General Provisions</HD>
          <SECTNO>4.80</SECTNO>
          <SUBJECT>Exports.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart J—American Grape Variety Names</HD>
          <SECTNO>4.91</SECTNO>
          <SUBJECT>List of approved prime names.</SUBJECT>
          <SECTNO>4.92</SECTNO>
          <SUBJECT>Alternative names permitted for temporary use.</SUBJECT>
          <SECTNO>4.93</SECTNO>
          <SUBJECT>Approval of grape variety names.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart K—Use of the Term “Organic”</HD>
          <SECTNO>4.101</SECTNO>
          <SUBJECT>Use of the term “organic.”</SUBJECT>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>27 U.S.C. 205, unless otherwise noted.</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. 6521, 25 FR 13835, Dec. 29, 1960, unless otherwise noted.</P>
      </SOURCE>
      <EDNOTE>
        <HD SOURCE="HED">Editorial Note:</HD>
        <P>Nomenclature changes to part 4 appear by T.D. ATF-425, 65 FR 11890, Mar. 7, 2000.</P>
      </EDNOTE>
      <SUBPART>
        <HD SOURCE="HED">Subpart A—Scope</HD>
        <SECTION>
          <SECTNO>§ 4.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>The regulations in this part relate to the labeling and advertising of wine.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <P>This part applies to the several States of the United States, the District of Columbia, and Puerto Rico.</P>
        </SECTION>
        <SECTION>
          <PRTPAGE P="14"/>
          <SECTNO>§ 4.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <P>(a) The appropriate TTB officer is authorized to prescribe all forms required by this part. All of the information called for in each form shall be furnished as indicated by the headings on the form and the instructions on or pertaining to the form. In addition, information called for in each form shall be furnished as required by this part. The form will be filed in accordance with the instructions for the form.</P>

          <P>(b) Forms prescribed by this part are available for printing through the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. ATF-92, 46 FR 46911, Sept. 23, 1981, as amended by T.D. ATF-249, 52 FR 5955, Feb. 27, 1987; T.D. 372, 61 FR 20723, May 8, 1996; T.D. ATF-425, 65 FR 11890, Mar. 7, 2000; T.D. TTB-44, 71 FR 16920, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.4</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>

          <P>Most of the regulatory authorities of the Administrator contained in this part are delegated to appropriate TTB officers. These TTB officers are specified in TTB Order 1135.4, Delegation of the Administator's Authorities in 27 CFR Part 4, Labeling and Advertising of Wine. You may obtain a copy of this order by accessing the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. TTB-44, 71 FR 16920, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.5</SECTNO>
          <SUBJECT>Related regulations.</SUBJECT>
          <P>The following regulations also relate to this part:
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">27 CFR Part 205—National Organic Program</FP>
            <FP SOURCE="FP-1">27 CFR Part 1—Basic Permit Requirements Under the Federal Alcohol Administration Act, Nonindustrial Use of Distilled Spirits and Wine, Bulk Sales and Bottling of Distilled Spirits</FP>
            <FP SOURCE="FP-1">27 CFR Part 5—Labeling and Advertising of Distilled Spirits</FP>
            <FP SOURCE="FP-1">27 CFR Part 7—Labeling and Advertising of Malt Beverages</FP>
            <FP SOURCE="FP-1">27 CFR Part 9—American Viticultural Areas</FP>
            <FP SOURCE="FP-1">27 CFR Part 12—Foreign Nongeneric Names of Geographic Significance Used in the Designation of Wines</FP>
            <FP SOURCE="FP-1">27 CFR Part 13—Labeling Proceedings</FP>
            <FP SOURCE="FP-1">27 CFR Part 16—Alcoholic Beverage Health Warning Statement</FP>
            <FP SOURCE="FP-1">27 CFR Part 24—Wine</FP>
            <FP SOURCE="FP-1">27 CFR Part 26—Liquors and Articles From Puerto Rico and the Virgin Islands</FP>
            <FP SOURCE="FP-1">27 CFR Part 27—Importation of Distilled Spirits, Wines, and Beer</FP>
            <FP SOURCE="FP-1">27 CFR Part 28—Exportation of Alcohol</FP>
            <FP SOURCE="FP-1">27 CFR Part 71—Rules of Practice in Permit Proceedings</FP>
          </EXTRACT>
          <CITA>[T.D. ATF-483, 67 FR 62857, Oct. 8, 2002, as amended by T.D. TTB-8, 69 FR 3829, Jan. 27, 2004]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 4.10</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>As used in this part, unless the context otherwise requires, terms shall have the meaning ascribed in this part.</P>
          <P>
            <E T="03">Act.</E> The Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Added brandy.</E> Brandy or wine spirits for use in fortification of wine as permitted by internal revenue law.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">Advertisement.</E> See § 4.61 for meaning of term as used in subpart G of this part.</P>
          <P>
            <E T="03">Alcohol.</E> Ethyl alcohol distilled at or above 190° proof.</P>
          <P>
            <E T="03">American.</E> The several States, the District of Columbia, and Puerto Rico; “State” includes the District of Columbia and Puerto Rico.</P>
          <P>
            <E T="03">Appropriate TTB officer.</E> An officer or employee of the Alcohol and Tobacco Tax and Trade Bureau (TTB) authorized to perform any functions relating to the administration or enforcement of this part by TTB Order 1135.4,Delegation of the Administrator's Authorities in 27 CFR part 4, Labeling and Advertising of Wine.</P>
          <P>
            <E T="03">Bottler.</E> Any person who places wine in containers of four liters or less. (See meaning for “containers” and “packer”.)</P>
          <P>
            <E T="03">Brand label.</E> The label carrying, in the usual distinctive design, the brand name of the wine.</P>
          <P>
            <E T="03">Container.</E> Any bottle, barrel, cask, or other closed receptacle irrespective of size or of the material from which <PRTPAGE P="15"/>made for use for the sale of wine at retail. (See meaning for “bottler” and “packer”.)</P>
          <P>
            <E T="03">Gallon.</E> A U.S. gallon of 231 cubic inches of alcoholic beverages at 60 °F.</P>
          <P>
            <E T="03">Interstate or foreign commerce.</E> Commerce between any State and any place outside thereof, or commerce within any Territory or the District of Columbia, or between points within the same State but through any place outside thereof.</P>
          <P>
            <E T="03">Liter or litre.</E> (a) A metric unit of capacity equal to 1,000 cubic centimeters and equivalent to 33.814 U.S. fluid ounces. For purposes of this part, a liter is subdivided into 1,000 milliliters (ml).</P>
          <P>(b) For purposes of regulation, one liter of wine is defined as that quantity (mass) of wine occupying a one-liter volume at 20 °Celsius (68 °F).</P>
          <P>
            <E T="03">Packer.</E> Any person who places wine in containers in excess of four liters. (See meaning for “container” and “bottler”.)</P>
          <P>
            <E T="03">Percent or percentage.</E> Percent by volume.</P>
          <P>
            <E T="03">Permittee.</E> Any person holding a basic permit under the Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Person.</E> Any individual, partnership, joint-stock company, business trust, association, corporation, or other form of business enterprise, including a receiver, trustee, or liquidating agent, and including an officer or employee of any agency of a State or political subdivision thereof.</P>
          <P>
            <E T="03">Pure condensed must.</E> The dehydrated juice or must of sound, ripe grapes, or other fruit or agricultual products, concentrated to not more than 80° (Balling), the composition thereof remaining unaltered except for removal of water.</P>
          <P>
            <E T="03">Restored pure condensed must.</E> Pure condensed must to which has been added an amount of water not exceeding the amount removed in the dehydration process.</P>
          <P>
            <E T="03">Sugar.</E> Pure cane, beet, or dextrose sugar in dry for containing, respectively, not less than 95 percent of actual sugar calculated on a dry basis.</P>
          <P>
            <E T="03">Total solids.</E> The degrees Brix of the dealcoholized wine restored to its original volume.</P>
          <P>
            <E T="03">Trade buyer.</E> Any person who is a wholesaler or retailer.</P>
          <P>
            <E T="03">United States.</E> The several States, the District of Columbia, and Puerto Rico; the term “State” includes the District of Columbia and Puerto Rico.</P>
          <P>
            <E T="03">Use of other terms.</E> Any other term defined in the Federal Alcohol Administration Act and used in this part shall have the same meaning assigned to it by the Act.</P>
          <P>
            <E T="03">Wine.</E> (a) Wine as defined in section 610 and section 617 of the Revenue Act of 1918 (26 U.S.C. 3036, 3044, 3045) and (b) other alcoholic beverages not so defined, but made in the manner of wine, including sparkling and carbonated wine, wine made from condensed grape must, wine made from other agricultural products than the juice of sound, ripe grapes, initation wine, compounds sold as wine, vermouth, cider, perry, and sake; in each instance only if containing not less than 7 percent, and not more than 24 percent of alcohol by volume, and if for nonindustrial use.</P>
          <CITA>[T.D. ATF-48, 43 FR 13532, Mar. 31, 1978, as amended by T.D. ATF-49, 43 FR 19848, May 9, 1978; T.D. ATF-53, 43 FR 37675, Aug. 23, 1978; 44 FR 55838, Sept. 29, 1979; T.D. ATF-66, 45 FR 40544, June 13, 1980; T.D. ATF-94, 46 FR 55095, Nov. 6, 1981; T.D. ATF-299, 55 FR 24988, June 19, 1990; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000; T.D. TTB-44, 71 FR 16921, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Standards of Identity for Wine</HD>
        <SECTION>
          <SECTNO>§ 4.20</SECTNO>
          <SUBJECT>Application of standards.</SUBJECT>
          <P>The standards of identity for the several classes and types of wine set forth herein shall be applicable to all regulations and permits issued under the act. Whenever any term for which a standard of identity has been established herein is used in any such regulation or permit, such term shall have the meaning assigned to it by such standard of identity.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.21</SECTNO>
          <SUBJECT>The standards of identity.</SUBJECT>
          <P>Standards of identity for the several classes and types of wine set forth in this part shall be as follows:</P>
          <P>(a) <E T="03">Class 1; grape wine</E>—(1) <E T="03">Grape wine</E> is wine produced by the normal alcoholic fermentation of the juice of sound, ripe grapes (including restored or unrestored pure condensed grape <PRTPAGE P="16"/>must), with or without the addition, after fermentation, of pure condensed grape must, and with or without added grape brandy or alcohol, but without other addition or abstraction except as may occur in cellar treatment: <E T="03">Provided,</E> That the product may be ameliorated before, during or after fermentation by either of the following methods:</P>
          <P>(i) By adding, separately or in combination, dry sugar, or such an amount of sugar and water solution as will not increase the volume of the resulting product more than 35 percent; but in no event shall any product so ameliorated have an alcoholic content derived by fermentation, of more than 13 percent by volume, or a natural acid content, if water has been added, of less than 5 parts per thousand, or a total solids content of more than 22 grams per 100 cubic centimeters.</P>
          <P>(ii) By adding, separately or in combination, not more than 20 percent by weight of dry sugar, or not more than 10 percent by weight of water.</P>
          <P>(iii) In the case of domestic wine, in accordance with 26 U.S.C. 5383.</P>

          <P>(iv) The maximum volatile acidity, calculated as acetic acid and exclusive of sulfur dioxide is 0.14 gram per 100 mL (20 °C) for natural red wine and 0.12 gram per 100 mL (20 °C) for other grape wine: <E T="03">Provided,</E> That the maximum volatile acidity for wine produced from unameliorated juice of 28 or more degrees Brix is 0.17 gram per 100 milliliters for red wine and 0.15 gram per 100 milliliters for white wine. Grape wine deriving its characteristic color or lack of color from the presence or absence of the red coloring matter of the skins, juice, or pulp of grapes may be designated as “red wine,” “pink (or rose) wine,” “amber wine,” or “white wine” as the case may be. Any grape wine containing no added grape brandy or alcohol may be further designated as “natural.”</P>
          <P>(2) <E T="03">Table wine</E> is grape wine having an alcoholic content not in excess of 14 percent by volume. Such wine may also be designated as “light wine,” “red table wine,” “light white wine,” “sweet table wine,” etc., as the case may be.</P>
          <P>(3) <E T="03">Dessert wine</E> is grape wine having an alcoholic content in excess of 14 percent but not in excess of 24 percent by volume. Dessert wine having the taste, aroma and characteristics generally attributed to sherry and an alcoholic content, derived in part from added grape brandy or alcohol, of not less than 17 percent by volume, may be designated as “sherry”. Dessert wines having the taste, aroma and characteristics generally attributed to angelica, madeira, muscatel and port and an alcoholic content, derived in part from added grape brandy or alcohol, of not less than 18 percent by volume, may be designated as “angelica,” “madeira,” “muscatel,” or “port” respectively. Dessert wines having the taste, aroma, and characteristics generally attributed to any of the above products and an alcoholic content, derived in part from added grape brandy or alcohol, in excess of 14 percent by volume but, in the case of sherry, less than 17 percent, or, in other cases, less than 18 percent by volume, may be designated as “light sherry,” “light angelica,” “light madeira,” “light muscatel” or “light port,” respectively.</P>
          <P>(b) <E T="03">Class 2; sparkling grape wine.</E> (1) <E T="03">Sparkling grape wine</E> (including “sparkling wine,” “sparkling red wine” and “sparkling white wine”) is grape wine made effervescent with carbon dioxide resulting solely from the fermentation of the wine within a closed container, tank or bottle.</P>
          <P>(2) <E T="03">Champagne</E> is a type of sparkling light wine which derives its effervescence solely from the secondary fermentation of the wine within glass containers of not greater than one gallon capacity, and which possesses the taste, aroma, and other characteristics attributed to champagne as made in the champagne district of France.</P>
          <P>(3)(i) A sparkling light wine having the taste, aroma, and characteristics generally attributed to champagne but not otherwise conforming to the standard for “champagne” may, in addition to but not in lieu of the class designation “sparkling wine,” be further designated as:</P>
          <P>(A) “Champagne style;” or</P>
          <P>(B) “Champagne type;” or</P>

          <P>(C) “American (or New York State, Napa Valley, etc.) champagne,” along with one of the following terms: “Bulk <PRTPAGE P="17"/>process,” “fermented outside the bottle,” “secondary fermentation outside the bottle,” “secondary fermentation before bottling,” “not fermented in the bottle,” or “not bottle fermented.” The term “charmat method” or “charmat process” may be used as additional information.</P>
          <P>(ii) Labels shall be so designed that all the words in such further designation are readily legible under ordinary conditions and are on a contrasting background. In the case of paragraph (b)(3)(i)(C) of this section, TTB will consider whether the label as a whole provides the consumer with adequate information about the method of production and origin of the wine. TTB will evaluate each label for legibility and clarity, based on such factors as type size and style for all components of the further designation and the optional term “charmat method” or “charmat process,” as well as the contrast between the lettering and its background, and the placement of information on the label.</P>
          <P>(iii) Notwithstanding the provisions of paragraphs (b)(3)(i)(A), (B) and (C) of this section, the appropriate TTB officer may authorize the use of a term on sparkling wine labels, as an alternative to those terms authorized in paragraph (b)(3)(i) of this section, but not in lieu of the required class designation “sparkling wine,” upon a finding that such term adequately informs the consumer about the method of production of the sparkling wine.</P>
          <P>(4) <E T="03">Crackling wine, petillant wine, frizzante wine</E> (including cremant, perlant, reciotto, and other similar wine) is sparkling light wine normally less effervescent than champagne or other similar sparkling wine, but containing sufficient carbon dioxide in solution to produce, upon pouring under normal conditions, after the disappearance of air bubbles, a slow and steady effervescence evidenced by the formation of gas bubbles flowing through the wine. Crackling wine which derives its effervescence from secondary fermentation in containers greater than 1-gallon capacity shall be designated “crackling wine—bulk process,” and the words “bulk process” shall appear in lettering of substantially the same size as the words “crackling wine.”</P>
          <P>(c) <E T="03">Class 3; carbonated grape wine. “Carbonated grape wine”</E> (including <E T="03">“carbonated wine,” “carbonated red wine,”</E> and <E T="03">“carbonated white wine”</E>) is grape wine made effervescent with carbon dioxide other than that resulting solely from the secondary fermentation of the wine within a closed container, tank or bottle.</P>
          <P>(d) <E T="03">Class 4; citrus wine.</E> (1)(i) <E T="03">Citrus wine</E> or <E T="03">citrus fruit wine</E> is wine produced by the normal alcoholic fermentation of the juice of sound, ripe citrus fruit (including restored or unrestored pure condensed citrus must), with or without the addition, after fermentation, of pure condensed citrus must, and with or without added citrus brandy or alcohol, but without any other addition or abstraction except as may occur in cellar treatment: <E T="03">Provided,</E> That a domestic product may be ameliorated or sweetened in accordance with the provisions of 26 U.S.C. 5384 and any product other than domestic may be ameliorated before, during, or after fermentation by adding, separately or in combination, dry sugar, or such an amount of sugar and water solution as will not increase the volume of the resulting product more than 35 percent, or in the case of products produced from citrus fruit having a normal acidity of 20 parts or more per thousand, not more than 60 percent, but in no event shall any product so ameliorated have an alcoholic content, derived by fermentation, of more than 14 percent by volume, or a natural acid content, if water has been added, of less than 5 parts per thousand, or a total solids content or more than 22 grams per 100 cubic centimeters.</P>
          <P>(ii) The maximum volatile acidity, calculated as acetic acid and exclusive of sulfur dioxide, shall not be, for natural citrus wine, more than 0.14 gram, and for other citrus wine, more than 0.12 gram, per 100 milliliters (20 °C.).</P>
          <P>(iii) Any citrus wine containing no added brandy or alcohol may be further designated as “natural.”</P>
          <P>(2) <E T="03">Citrus table wine</E> or <E T="03">citrus fruit table wine</E> is citrus wine having an alcoholic content not in excess of 14 percent by volume. Such wine may also be designated “light citrus wine,” “light citrus fruit wine,” “light sweet citrus fruit wine,” etc., as the case may be.<PRTPAGE P="18"/>
          </P>
          <P>(3) <E T="03">Citrus dessert wine</E> or <E T="03">citrus fruit dessert wine</E> is citrus wine having an alcoholic content in excess of 14 percent but not in excess of 24 percent by volume.</P>
          <P>(4) Citrus wine derived wholly (except for sugar, water, or added alcohol) from one kind of citrus fruit, shall be designated by the word “wine” qualified by the name of such citrus fruit, e.g., “orange wine,” “grapefruit wine.” Citrus wine not derived wholly from one kind of citrus fruit shall be designated as “citrus wine” or “citrus fruit wine” qualified by a truthful and adequate statement of composition appearing in direct conjunction therewith. Citrus wine rendered effervescent by carbon dioxide resulting solely from the secondary fermentation of the wine within a closed container, tank, or bottle shall be further designated as “sparkling”; and citrus wine rendered effervescent by carbon dioxide otherwise derived shall be further designated as “carbonated.”</P>
          <P>(e) <E T="03">Class 5; fruit wine.</E> (1)(i) <E T="03">Fruit wine</E> is wine (other than grape wine or citrus wine) produced by the normal alcoholic fermentation of the juice of sound, ripe fruit (including restored or unrestored pure condensed fruit must), with or without the addition, after fermentation, of pure condensed fruit must, and with or without added fruit brandy or alcohol, but without other addition or abstraction except as may occur in cellar treatment:<E T="03">Provided,</E> That a domestic product may be ameliorated or sweetened in accordance with the provisions of 26 U.S.C. 5384 and any product other than domestic may be ameliorated before, during, or after fermentation by adding, separately or in combination, dry sugar, or such an amount of dry sugar and water solution as will increase the volume of the resulting product, in the case of wines produced from any fruit or berry other than grapes, having a normal acidity of 20 parts or more per thousand, not more than 60 percent, and in the case of other fruit wines, not more than 35%, but in no event shall any product so ameliorated have an alcoholic content, derived by fermentation, of more than 14 percent by volume, or a natural acid content, if water has been added, of less than 5 parts per thousand, or a total solids content of more than 22 grams per 100 cubic centimeters.</P>
          <P>(ii) The maximum volatile acidity, calculated as acetic acid and exclusive of sulfur dioxide, shall not be, for natural fruit wine, more than 0.14 gram, and for other fruit wine, more than 0.12 gram, per 100 milliliters (20 °C.).</P>
          <P>(iii) Any fruit wine containing no added brandy or alcohol may be further designated as “natural.”</P>
          <P>(2) <E T="03">Berry wine</E> is fruit wine produced from berries.</P>
          <P>(3) <E T="03">Fruit table wine</E> or <E T="03">berry table wine</E> is fruit or berry wine having an alcoholic content not in excess of 14 percent by volume. Such wine may also be designated “light fruit wine,” or “light berry wine.”</P>
          <P>(4) <E T="03">Fruit dessert wine</E> or <E T="03">berry dessert wine</E> is fruit or berry wine having an alcoholic content in excess of 14 percent but not in excess of 24 percent by volume.</P>
          <P>(5) Fruit wine derived wholly (except for sugar, water, or added alcohol) from one kind of fruit shall be designated by the word “wine” qualified by the name of such fruit, e.g., “peach wine,” “blackberry wine.” Fruit wine not derived wholly from one kind of fruit shall be designated as “fruit wine” or “berry wine,” as the case may be, qualified by a truthful and adequate statement of composition appearing in direct conjunction therewith. Fruit wines which are derived wholly (except for sugar, water, or added alcohol) from apples or pears may be designated “cider” and “perry,” respectively, and shall be so designated if lacking in vinous taste, aroma, and characteristics. Fruit wine rendered effervescent by carbon dioxide resulting solely from the secondary fermentation of the wine within a closed container, tank, or bottle shall be further designated as “sparkling”; and fruit wine rendered effervescent by carbon dioxide otherwise derived shall be further designated as “carbonated.”</P>
          <P>(f) <E T="03">Class 6; wine from other agricultural products.</E> (1)(i) Wine of this class is wine (other than grape wine, citrus wine, or fruit wine) made by the normal alcoholic fermentation of sound fermentable agricultural products, either fresh or dried, or of the restored or <PRTPAGE P="19"/>unrestored pure condensed must thereof, with the addition before or during fermentation of a volume of water not greater than the minimum necessary to correct natural moisture deficiencies in such products, with or without the addition, after fermentation, of pure condensed must, and with or without added alcohol or such other spirits as will not alter the character of the product, but without other addition or abstraction except as may occur in cellar treatment: <E T="03">Provided,</E> That a domestic product may be ameliorated or sweetened in accordance with part 24, of this chapter, and any product other than domestic may be ameliorated before, during, or after fermentation by adding, separately or in combination, dry sugar or such an amount of sugar and water solution as will not increase the volume of the resulting product more than 35 percent, but in no event shall any product so ameliorated have an alcoholic content, derived by fermentation of more than 14 percent by volume, or a natural acid content, if water has been added, of less than 5 parts per thousand, or a total solids content of more than 22 grams per 100 cubic centimeters.</P>
          <P>(ii) The maximum volatile acidity, calculated as acetic acid and exclusive of sulfur dioxide, shall not be, for natural wine of this class, more than 0.14 gram, and for other wine of this class, more than 0.12 gram, per 100 milliliters (20 °C.).</P>
          <P>(iii) Wine of this class containing no added alcohol or other spirits may be further designated as “natural”.</P>
          <P>(2) <E T="03">Table wine</E> of this class is wine having an alcoholic content not in excess of 14 percent by volume. Such wine may also be designated as “light”.</P>
          <P>(3) <E T="03">Dessert wine</E> of this class is wine having an alcoholic content in excess of 14 percent but not in excess of 24 percent by volume.</P>
          <P>(4) <E T="03">Raisin wine</E> is wine of this class made from dried grapes.</P>
          <P>(5) <E T="03">Sake</E> is wine of this class produced from rice in accordance with the commonly accepted method of manufacture of such product.</P>
          <P>(6) Wine of this class derived wholly (except for sugar, water, or added alcohol) from one kind of agricultural product shall except in the case of “sake,” be designated by the word “wine” qualified by the name of such agricultural product, e.g., “honey wine,” “raisin wine,” “dried blackberry wine.” Wine of this class not derived wholly from one kind of agricultural product shall be designated as “wine” qualified by a truthful and adequate statement of composition appearing in direct conjunction therewith. Wine of this class rendered effervescent by carbon dioxide resulting solely from the secondary fermentation of wine within a closed container, tank, or bottle shall be further designated as “sparkling”; and wine of this class rendered effervescent by carbon dioxide otherwise derived shall be further designated as “carbonated.”</P>
          <P>(g) <E T="03">Class 7; aperitif wine.</E> (1) <E T="03">Aperitif wine</E> is wine having an alcoholic content of not less than 15 percent by volume, compounded from grape wine containing added brandy or alcohol, flavored with herbs and other natural aromatic flavoring materials, with or without the addition of caramel for coloring purposes, and possessing the taste, aroma, and characteristics generally attributed to aperitif wine and shall be so designated unless designated as “vermouth” under paragraph (g)(2) of this section.</P>
          <P>(2) <E T="03">Vermouth</E> is a type of aperitif wine compounded from grape wine, having the taste, aroma, and characteristics generally attributed to vermouth, and shall be so designated.</P>
          <P>(h) <E T="03">Class 8; imitation and substandard or other than standard wine.</E> (1) “Imitation wine” shall bear as a part of its designation the word “imitation,” and shall include:</P>
          <P>(i) Any wine containing synthetic materials.</P>
          <P>(ii) Any wine made from a mixture of water with residue remaining after thorough pressing of grapes, fruit, or other agricultural products.</P>

          <P>(iii) Any class or type of wine the taste, aroma, color, or other characteristics of which have been acquired in whole or in part, by treatment with methods or materials of any kind (except as permitted in § 4.22(c)(6)), if the taste, aroma, color, or other characteristics of normal wines of such class or type are acquired without such treatment.<PRTPAGE P="20"/>
          </P>
          <P>(iv) Any wine made from must concentrated at any time to more than 80° (Balling).</P>
          <P>(2) “Substandard wine” or “other than standard wine” shall bear as a part of its designation the words “substandard” or “other than standard,” and shall include:</P>
          <P>(i) Any wine having a volatile acidity in excess of the maximum prescribed therefor in §§ 4.20 to 4.25.</P>
          <P>(ii) Any wine for which no maximum volatile acidity is prescribed in §§ 4.20 to 4.25, inclusive, having a volatile acidity, calculated as acetic acid and exclusive of sulfur dioxide, in excess of 0.14 gram per 100 milliliters (20 °C.).</P>
          <P>(iii) Any wine for which a standard of identity is prescribed in this §§ 4.20 to 4.25, inclusive, which, through disease, decomposition, or otherwise, fails to have the composition, color, and clean vinous taste and aroma of normal wines conforming to such standard.</P>
          <P>(iv) Any “grape wine” “citrus wine,” “fruit wine,” or “wine from other agricultural products” to which has been added sugar and water solution in an amount which is in excess of the limitations prescribed in the standards of identity for these products, unless, in the case of “citrus wine,” “fruit wine” and “wine from other agricultural products” the normal acidity of the material from which such wine is produced is 20 parts or more per thousand and the volume of the resulting product has not been increased more than 60 percent by such addition.</P>
          <P>(i) <E T="03">Class 9; retsina wine.</E> “Retsina wine” is grape table wine fermented or flavored with resin.</P>
          <CROSSREF>
            <HD SOURCE="HED">Cross Reference:</HD>
            <P>For regulations relating to the use of spirits in wine, see part 24 of this chapter.</P>
          </CROSSREF>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. 6776, 29 FR 16985, Dec. 11, 1964; T.D. 7185, 37 FR 7975, Apr. 22, 1972; T.D. ATF-48, 44 FR 55839, Sept. 28, 1979; T.D. ATF-299, 55 FR 24988, June 19, 1990; T.D. ATF-312, 56 FR 31076, July 9, 1991; T.D. ATF-335, 58 FR 5615, Jan. 22, 1993; T.D. ATF-355, 59 FR 14553, Mar. 29, 1994; T.D. 372, 61 FR 20723, May 8, 1996; T.D. ATF-398, 63 FR 44782, Aug. 21, 1998; T.D. ATF-403, 64 FR 50252, Sept. 16, 1999; T.D. ATF-458, 66 FR 37578, July 19, 2001; T.D. ATF-470, 66 FR 58944, Nov. 26, 2001; T.D. ATF-953, 68 FR 39455, July 2, 2003; T.D. TTB-23, 70 FR 2801, Jan. 18, 2005]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.22</SECTNO>
          <SUBJECT>Blends, cellar treatment, alteration of class or type.</SUBJECT>
          <P>(a) If the class or type of any wine shall be altered, and if the product as so altered does not fall within any other class or type either specified in §§ 4.20 through 4.25 or known to the trade, then such wine shall, unless otherwise specified in this section, be designated with a truthful and adequate statement of composition in accordance with § 4.34.</P>
          <P>(b) Alteration of class or type shall be deemed to result from any of the following occurring before, during, or after production.</P>

          <P>(1) Treatment of any class or type of wine with substances foreign to such wine which remain therein: <E T="03">Provided,</E> That the presence in finished wine of not more than 350 parts per million of total sulfur dioxide, or sulphites expressed as sulfur dioxide, shall not be precluded under this paragraph.</P>
          <P>(2) Treatment of any class or type of wine with substances not foreign to such wine but which remain therein in larger quantities than are naturally and normally present in other wines of the same class or type not so treated.</P>
          <P>(3) Treatment of any class or type of wine with methods or materials of any kind to such an extent or in such manner as to affect the basic composition of the wine so treated by altering any of its characteristic elements.</P>
          <P>(4) Blending of wine of one class with wine of another class or the blending of wines of different types within the same class.</P>
          <P>(5) Treatment of any class or type of wine for which a standard of identity is prescribed in this subpart with sugar or water in excess of the quantities specifically authorized by such standards:</P>
          <P>
            <E T="03">Provided, That</E> the class or type thereof shall not be deemed to be altered:</P>
          <P>(i) Where such wine (other than grape wine) is derived from fruit or other agricultural products having a high normal acidity, if the total solids content is not more than 22 grams per 100 cubic centimeters and the content of natural acid is not less than 7.69 grams per liter, and</P>

          <P>(ii) Where such wine is derived exclusively from fruit or other agricultural products the normal acidity of which is <PRTPAGE P="21"/>20 parts or more per thousand, if the volume of the resulting product has been increased not more than 60 percent by the addition of sugar and water solution for the sole purpose of correcting natural deficiencies due to such acidity and (except in the case of such wine when produced from fruit or berries other than grapes) there is stated as part of the class and type designation the phrase “Made with over 35 percent sugar solution.”</P>
          <P>(c) Nothing in this section shall preclude the treatment of wine of any class or type in the manner hereinafter specified, provided such treatment does not result in the alteration of the class or type of the wine under the provisions of paragraph (b) of this section.</P>
          <P>(1) Treatment with filtering equipment, and with fining or sterilizing agents.</P>
          <P>(2) Treatment with pasteurization as necessary to perfect the wines to commercial standards in accordance with acceptable cellar practice but only in such a manner and to such an extent as not to change the basic composition of the wine nor to eliminate any of its characteristic elements.</P>
          <P>(3) Treatment with refrigeration as necessary to perfect the wine to commercial standards in accordance with acceptable cellar practice but only in such a manner and to such an extent as not to change the basic composition of the wine nor to eliminate any of its characteristic elements.</P>
          <P>(4) Treatment with methods and materials to the minimum extent necessary to correct cloudiness, precipitation, or abnormal color, odor, or flavor developing in wine.</P>
          <P>(5) Treatment with constituents naturally present in the kind of fruit or other agricultural product from which the wine is produced for the purpose of correcting deficiencies of these constituents, but only to the extent that such constituents would be present in normal wines of the same class or type not so treated.</P>
          <P>(6) Treatment of any class or type of wine involving the use of volatile fruit-flavor concentrates in the manner provided in section 5382 of the Internal Revenue Code.</P>

          <P>(7) Notwithstanding the provisions of § 4.21(b) (1), (2) and (4), (c), (d)(4), (e)(5), and (f)(6) carbon dioxide may be used to maintain counterpressure during the transfer of finished sparkling wines from (i) bulk processing tanks to bottles, or (ii) bottle to bottle: <E T="03">Provided,</E> That the carbon dioxide content of the wine shall not be increased by more than 0.009 gm. per 100 ml. during the transfer operation.</P>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. 6776, 29 FR 16985, Dec. 11, 1964; T.D. 7185, 37 FR 7976, Apr. 22, 1972; T.D. ATF-403, 64 FR 50253, Sept. 16, 1999; T.D. ATF-458, 66 FR 37578, July 19, 2001; T.D. ATF-953, 68 FR 39455, July 2, 2003]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.23</SECTNO>
          <SUBJECT>Varietal (grape type) labeling.</SUBJECT>
          <P>(a) <E T="03">General.</E> The names of one or more grape varieties may be used as the type designation of a grape wine only if the wine is also labeled with an appellation of origin as defined in § 4.25a.</P>
          <P>(b) <E T="03">One variety.</E> Except as provided in paragraph (c) of this section, the name of a single grape variety may be used as the type designation if not less than 75 percent of the wine is derived from grapes of that variety, the entire 75 percent of which was grown in the labeled appellation of origin area.</P>
          <P>(c) <E T="03">Exceptions.</E> (1) Wine made from any <E T="03">Vitis labrusca</E> variety (exclusive of hybrids with <E T="03">Vitis labrusca</E> parentage) may be labeled with the variety name if:</P>
          <P>(i) Not less than 51 percent of the wine is derived from grapes of the named variety;</P>
          <P>(ii) The statement “contains not less than 51 percent (name of variety)” is shown on the brand label, back label, or a separate strip label, (except that this statement need not appear if 75 percent or more of the wine is derived from grapes of the named variety); and</P>
          <P>(iii) The entire qualifying percentage of the named variety was grown in the labeled appellation of origin area.</P>
          <P>(2) Wine made from any variety of any species found by the appropriate TTB officer upon appropriate application to be too strongly flavored at 75 percent minimum varietal content may be labeled with the varietal name if:</P>

          <P>(i) Not less than 51 percent of the wine is derived from grapes of that variety;<PRTPAGE P="22"/>
          </P>
          <P>(ii) The statement “contains not less than 51 percent (name of variety)” is shown on the brand label, back label, or a separate strip label (except that this statement need not appear if 75 percent or more of the wine is derived from grapes of the named variety); and</P>
          <P>(iii) The entire qualifying percentage of the named variety was grown in the labeled appellation of origin area.</P>
          <P>(d) <E T="03">Two or more varieties.</E> The names of two or more grape varieties may be used as the type designation if:</P>
          <P>(1) All of the grapes used to make the wine are of the labeled varieties;</P>
          <P>(2) The percentage of the wine derived from each variety is shown on the label (with a tolerance of plus or minus 2 percent); and</P>
          <P>(3)(i) If labeled with a multicounty appellation of origin, the percentage of the wine derived from each variety from each county is shown on the label; or</P>
          <P>(ii) If labeled with a multistate appellation of origin, the percentage of the wine derived from each variety from each state is shown on the label.</P>
          <P>(e) <E T="03">List of approved variety names.</E> Effective February 7, 1996, the name of a grape variety may be used as a type designation for an American wine only if that name has been approved by the Administrator. A list of approved grape variety names appears in subpart J of this part.</P>
          <CITA>[T.D. ATF-370, 61 FR 538, Jan. 8, 1996]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.24</SECTNO>
          <SUBJECT>Generic, semi-generic, and non-generic designations of geographic significance.</SUBJECT>
          <P>(a)(1) A name of geographic significance which is also the designation of a class or type of wine, shall be deemed to have become generic only if so found by the Administrator.</P>
          <P>(2) Examples of generic names, originally having geographic significance, which are designations for a class or type of wine are: Vermouth, Sake.</P>
          <P>(b)(1) A name of geographic significance, which is also the designation of a class or type of wine, shall be deemed to have become semi-generic only if so found by the Administrator. Semi-generic designations may be used to designate wines of an origin other than that indicated by such name only if there appears in direct conjunction therewith an appropriate appellation of origin disclosing the true place of origin of the wine, and if the wine so designated conforms to the standard of identity, if any, for such wine contained in the regulations in this part or, if there be no such standard, to the trade understanding of such class or type. See § 24.257(c) of this chapter for exceptions to the Administrator's authority to remove names from paragraph (b)(2) of this section.</P>
          <P>(2) Examples of semi-generic names which are also type designations for grape wines are Angelica, Burgundy, Claret, Chablis, Champagne, Chianti, Malaga, Marsala, Madeira, Moselle, Port, Rhine Wine (syn. Hock), Sauterne, Haut Sauterne, Sherry, Tokay.</P>
          <P>(c)(1) A name of geographic significance, which has not been found by the Administrator to be generic or semi-generic may be used only to designate wines of the origin indicated by such name, but such name shall not be deemed to be the distinctive designation of a wine unless the Administrator finds that it is known to the consumer and to the trade as the designation of a specific wine of a particular place or region, distinguishable from all other wines.</P>
          <P>(2) Examples of nongeneric names which are not distinctive designations of specific grape wines are: American, California, Lake Erie, Napa Valley, New York State, French, Spanish. Additional examples of foreign nongeneric names are listed in subpart C of part 12 of this chapter.</P>
          <P>(3) Examples of nongeneric names which are also distinctive designations of specific grape wines are: Bordeaux Blanc, Bordeaux Rouge, Graves, Medoc, Saint-Julien, Chateau Yquem, Chateau Margaux, Chateau Lafite, Pommard, Chambertin, Montrachet, Rhone, Liebfraumilch, Rudesheimer, Forster, Deidesheimer, Schloss Johannisberger, Lagrima, and Lacryma Christi. A list of foreign distinctive designations, as determined by the Administrator, appears in subpart D of part 12 of this chapter.</P>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. ATF-296, 55 FR 17967, Apr. 30, 1990; T.D. ATF-398, 63 FR 44783, Aug. 21, 1998; T.D. ATF-425, 65 FR 11890, 11891, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <PRTPAGE P="23"/>
          <SECTNO>§ 4.25</SECTNO>
          <SUBJECT>Appellations of origin.</SUBJECT>
          <P>(a) <E T="03">Definition</E>—(1) <E T="03">American wine.</E> An American appellation of origin is: (i) The United States; (ii) a State; (iii) two or no more than three States which are all contiguous; (iv) a county (which must be identified with the word “county”, in the same size of type, and in letters as conspicuous as the name of the county); (v) two or no more than three counties in the same States; or (vi) a viticultural area (as defined in paragraph (e) of this section).</P>
          <P>(2) <E T="03">Imported wine.</E> An appellation of origin for imported wine is: (i) A country, (ii) a state, province, territory, or similar political subdivision of a country equivalent to a state or county; or (iii) a viticultural area.</P>
          <P>(b) <E T="03">Qualification</E>—(1) <E T="03">American wine.</E> An American wine is entitled to an appellation of origin other than a multicounty or multistate appellation, or a viticultural area, if:</P>
          <P>(i) At least 75 percent of the wine is derived from fruit or agricultural products grown in the appellation area indicated; (ii) it has been fully finished (except for cellar treatment pursuant to § 4.22(c), and blending which does not result in an alteration of class or type under § 4.22(b)) in the United States, if labeled “American”; or, if labeled with a State appellation, within the labeled State or an adjacent State; or if labeled with a county appellation, within the State in which the labeled county is located; and (iii) it conforms to the laws and regulations of the named appellation area governing the composition, method of manufacture, and designation of wines made in such place.</P>
          <P>(2) <E T="03">Imported wine.</E> An imported wine is entitled to an appellation of origin other than a viticultural area if:</P>
          <P>(i) At least 75 percent of the wine is derived from fruit or agricultural products grown in the area indicated by the appellation of origin; and (ii) The wine conforms to the requirements of the foreign laws and regulations governing the composition, method of production, and designation of wines available for consumption within the country of origin.</P>
          <P>(c) <E T="03">Multicounty appellations.</E> An appellation of origin comprising two or no more than three counties in the same State may be used if all of the fruit or other agricultural products were grown in the counties indicated, and the percentage of the wine derived from fruit or other agricultural products grown in each county is shown on the label with a tolerance of plus or minus two percent.</P>
          <P>(d) <E T="03">Multistate appellation.</E> An appelation of origin comprising two or no more than three States which are all contiguous may be used, if:</P>
          <P>(1) All of the fruit or other agricultural products were grown in the States indicated, and the percentage of the wine derived from fruit or other agricultural products grown in each State is shown on the label with a tolerance of plus or minus two percent;</P>
          <P>(2) it has been fully finished (except for cellar treatment pursuant to § 4.22(c), and blending which does not result in an alteration of class or type under § 4.22(b)) in one of the labeled appellation States; (3) it conforms to the laws and regulations governing the composition, method of manufacture, and designation of wines in all the States listed in the appellation.</P>
          <P>(e) <E T="03">Viticultural area</E>—(1) <E T="03">Definition</E>—(i) <E T="03">American wine.</E> A delimited grape growing region distinguishable by geographical features, the boundaries of which have been recognized and defined in part 9 of this chapter.</P>
          <P>(ii) <E T="03">Imported wine.</E> A delimited place or region (other than an appellation defined in paragraph (a)(2)(i) or (a)(2)(ii)) the boundaries of which have been recognized and defined by the country of origin for use on labels of wine available for consumption within the country of origin.</P>
          <P>(2) <E T="03">Establishment of American viticultural areas.</E> Petitions for establishment of American viticultural areas may be made to the Administrator by any interested party, pursuant to the provisions of § 70.701(c) of this title. The petition may be in the form of a letter, and should contain the following information referred to in § 9.3(b) of this title.</P>
          <P>(3) <E T="03">Requirements for use.</E> A wine may be labeled with a viticultural area appellation if:</P>

          <P>(i) The appellation has been approved under part 9 of this title or by the appropriate foreign government;<PRTPAGE P="24"/>
          </P>
          <P>(ii) Not less than 85 percent of the wine is derived from grapes grown within the boundaries of the viticultural area;</P>
          <P>(iii) In the case of foreign wine, it conforms to the requirements of the foreign laws and regulations governing the composition, method of production, and designation of wines available for consumption within the country of origin; and</P>
          <P>(iv) In the case of American wine, it has been fully finished within the State, or one of the States, within which the labeled viticultural area is located (except for cellar treatment pursuant to § 4.22(c), and blending which does not result in an alteration of class and type under § 4.22(b)).</P>
          <P>(4) <E T="03">Overlap viticultural area appellations.</E> An appellation of origin comprised of more than one viticultural area may be used in the case of overlapping viticultural areas if not less than 85 percent of the volume of the wine is derived from grapes grown in the overlapping area.</P>
          <CITA>[T.D. ATF-53, 43 FR 37675, Aug. 23, 1978, as amended by T.D. ATF-84, 46 FR 29261, June 1, 1981; T.D. ATF-92, 46 FR 46912, Sept. 23, 1981; T.D. ATF-195, 50 FR 763, Jan. 7, 1985; T.D. ATF-201, 50 FR 12533, Mar. 29, 1985; T.D. ATF-222, 51 FR 3774, Jan. 30 1986; T.D. ATF-312, 56 FR 31076, July 9, 1991; T.D. ATF-355, 59 FR 14553, Mar. 29, 1994; T.D. ATF-432, 65 FR 69253, Nov. 16, 2000. Redesignated by T.T.B. T.D.-2, 68 FR 39455, July 2, 2003]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.26</SECTNO>
          <SUBJECT>Estate bottled.</SUBJECT>
          <P>(a) <E T="03">Conditions for use.</E> The term <E T="03">Estate bottled</E> may be used by a bottling winery on a wine label only if the wine is labeled with a viticultural area appellation of origin and the bottling winery:</P>
          <P>(1) Is located in the labeled viticultural area; (2) grew all of the grapes used to make the wine on land owned or controlled by the winery within the boundaries of the labeled viticultural area; (3) crushed the grapes, fermented the resulting must, and finished, aged, and bottled the wine in a continuous process (the wine at no time having left the premises of the bottling winery).</P>
          <P>(b) <E T="03">Special rule for cooperatives.</E> Grapes grown by members of a cooperative bottling winery are considered grown by the bottling winery.</P>
          <P>(c) <E T="03">Definition of “Controlled”.</E> For purposes of this section, <E T="03">Controlled by</E> refers to property on which the bottling winery has the legal right to perform, and does perform, all of the acts common to viticulture under the terms of a lease or similar agreement of at least 3 years duration.</P>
          <P>(d) <E T="03">Use of other terms.</E> No term other than <E T="03">Estate bottled</E> may be used on a label to indicate combined growing and bottling conditions.</P>
          <CITA>[T.D. ATF-53, 43 FR 37676, Aug. 23, 1978, as amended by T.D. ATF-201, 50 FR 12533, Mar. 29, 1985]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.27</SECTNO>
          <SUBJECT>Vintage wine.</SUBJECT>
          <P>(a) <E T="03">General.</E> Vintage wine is wine labeled with the year of harvest of the grapes and made in accordance with the standards prescribed in classes 1, 2, or 3 of § 4.21. The wine must be labeled with an appellation of origin other than a country (which does not qualify for vintage labeling). The appellation must be shown in direct conjunction with the designation required by § 4.32(a)(2), in lettering substantially as conspicuous as that designation. In no event may the quantity of wine removed from the producing winery, under labels bearing a vintage date, exceed the volume of vintage wine produced in that winery during the year indicated by the vintage date. The following additional rules apply to vintage labeling:</P>
          <P>(1) If an American or imported wine is labeled with a viticultural area appellation of origin (or its foreign equivalent), at least 95 percent of the wine must have been derived from grapes harvested in the labeled calendar year; or</P>
          <P>(2) If an American or imported wine is labeled with an appellation of origin other than a country or viticultural area (or its foreign equivalent), at least 85 percent of the wine must have been derived from grapes harvested in the labeled calendar year.</P>
          <P>(b) <E T="03">American wine.</E> A permittee who produced and bottled or packed the wine, or a person other than the producer who repackaged the wine in containers of 5 liters or less may show the year of vintage upon the label if the person possesses appropriate records from the producer substantiating the <PRTPAGE P="25"/>year of vintage and the appellation of origin; and if the wine is made in compliance with the provisions of paragraph (a) of this section.</P>
          <P>(c) <E T="03">Imported wine.</E> Imported wine may bear a vintage date if all of the following conditions are met:</P>
          <P>(1) It is made in compliance with the provisions of paragraph (a) of this section;</P>
          <P>(2) It is bottled in containers of 5 liters or less prior to importation, or it is bottled in the United States from the original container of the product (showing a vintage date); and</P>
          <P>(3) The invoice is accompanied by, or the American bottler possesses, a certificate issued by a duly authorized official of the country of origin (if the country of origin authorizes the issuance of such certificates) certifying that the wine is of the vintage shown, that the laws of the country regulate the appearance of vintage dates upon the labels of wine produced for consumption within the country of origin, that the wine has been produced in conformity with those laws, and that the wine would be entitled to bear the vintage date if it had been sold within the country of origin.</P>
          <CITA>[T.D. ATF-53, 43 FR 37676, Aug. 23, 1978, as amended by T.D. ATF-195, 50 FR 763, Jan. 7, 1985; T.D. TTB-45, 71 FR 25752, May 2, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.28</SECTNO>
          <SUBJECT>Type designations of varietal significance.</SUBJECT>
          <P>The following are type designations of varietal significance for American wine. These names may be used as type designations for American wines only if the wine is labeled with an appellation of origin as defined in § 4.25a.</P>
          <P>(a) <E T="03">Muscadine.</E> An American wine which derives at least 75 percent of its volume from <E T="03">Muscadinia rotundifolia</E> grapes.</P>
          <P>(b) <E T="03">Muscatel.</E> An American wine which derives its predominant taste, aroma, characteristics and at least 75 percent of its volume from any Muscat grape source, and which meets the requirements of § 4.21(a)(3).</P>
          <P>(c) <E T="03">Muscat or Moscato.</E> An American wine which derives at least 75 percent of its volume from any Muscat grape source.</P>
          <P>(d) <E T="03">Scuppernong.</E> An American wine which derives at least 75 percent of its volume from bronze <E T="03">Muscadinia rotundifolia</E> grapes.</P>
          <P>(e)(1) <E T="03">Gamay Beaujolais.</E> An American wine which derives at least 75 percent of its volume from Pinot noir grapes, Valdiguié grapes, or a combination of both.</P>
          <P>(2) For wines bottled on or after January 1, 1999, and prior to April 9, 2007, the name “Gamay Beaujolais” may be used as a type designation only if there appears in direct conjunction therewith, but on a separate line and separated by the required appellation of origin, the name(s) of the grape variety or varieties used to satisfy the requirements of paragraph (e)(1) of this section. Where two varietal names are listed, they shall appear on the same line, in order of predominance. The appellation of origin shall appear either on a separate line between the name “Gamay Beaujolais” and the grape variety name(s) or on the same line as the grape variety name(s) in a manner that qualifies the grape variety name(s). The following statement shall also appear on the brand or back label: “Gamay Beaujolais is made from at least 75 percent Pinot noir and/or Valdiguié grapes.”</P>
          <P>(3) The designation “Gamay Beaujolais” may not be used on labels of American wines bottled on or after April 9, 2007.</P>
          <CITA>[T.D. ATF-370, 61 FR 539, Jan. 8, 1996, as amended by T.D. ATF-388, 62 FR 16490, Apr. 7, 1997; T.D. ATF-388a, 62 FR 33747, June 23, 1997]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart D—Labeling Requirements for Wine</HD>
        <SECTION>
          <SECTNO>§ 4.30</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>(a) <E T="03">Application.</E> No person engaged in business as a producer, rectifier, blender, importer, or wholesaler, directly or indirectly or through an affiliate, shall sell or ship or deliver for sale or shipment, or otherwise introduce in interstate or foreign commerce, or receive therein, or remove from customs custody, any wine in containers unless such wine is packaged, and such packages are marked, branded, and labeled in conformity with this subpart. Wine domestically bottled or packed prior to Dec. 15, 1936, and imported wine entered in customs bond in containers <PRTPAGE P="26"/>prior to that date shall be regarded as being packaged, marked, branded and labeled in accordance with this subpart, if the labels on such wine (1) bear all the mandatory label information required by § 4.32, even though such information is not set forth in the manner and form as required by § 4.32 and other sections of this title referred to therein, and (2) bear no statements, designs, or devices which are false or misleading.</P>
          <P>(b) <E T="03">Alteration of labels.</E> (1) It shall be unlawful for any person to alter, mutilate, destroy, obliterate or remove any mark, brand, or label upon wine held for sale in interstate or foreign commerce or after shipment therein, except as authorized by Federal law, or except as provided in paragraph (b)(2) of this section: <E T="03">Provided,</E> That the appropriate TTB officer may, upon written application, permit additional labeling or relabeling of wine for purposes of compliance with the requirements of this part or of State law.</P>
          <P>(2) No application for permission to relabel wine need be made in any case where there is added to the container, after removal from customs custody or from the premises where bottled or packed, a label identifying the wholesale or retail distributor thereof, and containing no reference whatever to the characteristics of the product.</P>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. ATF-425, 65 FR 11891, Mar. 7, 2000; T.D. ATF-953, 68 FR 39455, July 2, 2003]</CITA>
          <CROSSREF>
            <HD SOURCE="HED">Cross Reference:</HD>
            <P>For customs warehouses and control of merchandise therein, see 19 CFR part 19.</P>
          </CROSSREF>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.32</SECTNO>
          <SUBJECT>Mandatory label information.</SUBJECT>
          <P>(a) There shall be stated on the brand label:</P>
          <P>(1) Brand name, in accordance with § 4.33.</P>
          <P>(2) Class, type, or other designation, in accordance with § 4.34.</P>
          <P>(3) Alcohol content, in accordance with § 4.36.</P>
          <P>(4) On blends consisting of American and foreign wines, if any reference is made to the presence of foreign wine, the exact percentage by volume.</P>
          <P>(b) There shall be stated on any label affixed to the container:</P>
          <P>(1) Name and address, in accordance with § 4.35.</P>
          <P>(2) Net contents, in accordance with § 4.37. If the net contents is a standard of fill other than an authorized metric standard of fill as prescribed in § 4.73, the net contents statement shall appear on a label affixed to the front of the bottle.</P>
          <P>(c) There shall be stated on the brand label or on a back label a statement that the product contains FD&amp;C Yellow No. 5, where that coloring material is used in a product bottled on or after October 6, 1984.</P>
          <P>(d) [Reserved]</P>
          <P>(e) <E T="03">Declaration of sulfites.</E> There shall be stated on a front label, back label, strip label or neck label, the statement “Contains sulfites” or “Contains (a) sulfiting agent(s)” or a statement identifying the specific sulfiting agent where sulfur dioxide or a sulfiting agent is detected at a level of 10 or more parts per million, measured as total sulfur dioxide. The provisions of this paragraph shall apply to:</P>
          <P>(1) Any certificate of label approval issued on or after January 9, 1987;</P>
          <P>(2) Any wine bottled on or after July 9, 1987, regardless of the date of issuance of the certificate of label approval; and,</P>
          <P>(3) Any wine removed on or after January 9, 1988.</P>
          <APPRO>(Paragraph (e) approved by the Office of Management and Budget under Control Number 1512-0469)</APPRO>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. ATF-150, 48 FR 45556, Oct. 6, 1983; T.D. ATF-195, 50 FR 763, Jan. 7, 1985; T.D. ATF-220, 50 FR 51852, Dec. 20, 1985; T.D. ATF-236, 51 FR 34710, Sept. 30, 1986; T.D. ATF-282, 54 FR 7162, Feb. 16, 1989; T.D. ATF-312, 56 FR 31076, 31077, July 9, 1991; T.D. TTB-12, 69 FR 33573, June 16, 2004]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.32a</SECTNO>
          <SUBJECT>Voluntary disclosure of major food allergens.</SUBJECT>
          <P>(a) <E T="03">Definitions</E>. For purposes of this section the following terms have the meanings indicated.</P>
          <P>(1) <E T="03">Major food allergen</E>. <E T="03">Major food allergen</E> means any of the following:</P>

          <P>(i) Milk, egg, fish (for example, bass, flounder, or cod), Crustacean shellfish (for example, crab, lobster, or shrimp), tree nuts (for example, almonds, pecans, or walnuts), wheat, peanuts, and soybeans; or<PRTPAGE P="27"/>
          </P>
          <P>(ii) A food ingredient that contains protein derived from a food specified in paragraph (a)(1)(i) of this section, except:</P>
          <P>(A) Any highly refined oil derived from a food specified in paragraph (a)(1)(i) of this section and any ingredient derived from such highly refined oil; or</P>
          <P>(B) A food ingredient that is exempt from major food allergen labeling requirements pursuant to a petition for exemption approved by the Food and Drug Administration (FDA) under 21 U.S.C. 343(w)(6) or pursuant to a notice submitted to FDA under 21 U.S.C. 343(w)(7), provided that the food ingredient meets the terms or conditions, if any, specified for that exemption.</P>
          <P>(2) <E T="03">Name of the food source from which each major food allergen is derived. Name of the food source from which each major food allergen is derived</E> means the name of the food as listed in paragraph (a)(1)(i) of this section, except that:</P>
          <P>(i) In the case of a tree nut, it means the name of the specific type of nut (for example, almonds, pecans, or walnuts);</P>
          <P>(ii) In the case of Crustacean shellfish, it means the name of the species of Crustacean shellfish (for example, crab, lobster, or shrimp); and</P>
          <P>(iii) The names “egg” and “peanuts”, as well as the names of the different types of tree nuts, may be expressed in either the singular or plural form, and the term “soy”, soybean”, or “soya” may be used instead of “soybeans”.</P>
          <P>(b) <E T="03">Voluntary labeling standards</E>. Major food allergens (defined in paragraph (a)(1) of this section) used in the production of a wine may, on a voluntary basis, be declared on any label affixed to the container. However, if any one major food allergen is voluntarily declared, all major food allergens used in production of the wine, including major food allergens used as fining or processing agents, must be declared, except when covered by a petition for exemption approved by the appropriate TTB officer under § 4.32b. The major food allergens declaration must consist of the word “Contains” followed by a colon and the name of the food source from which each major food allergen is derived (for example, “Contains: egg”).</P>
          <P>(c) <E T="03">Cross reference</E>. For mandatory labeling requirements applicable to wines containing FD&amp;C Yellow No. 5 and sulfites, see §§ 4.32(c) and (e).</P>
          <CITA>[T.D. TTB-53, 71 FR 42267, July 26, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.32b</SECTNO>
          <SUBJECT>Petitions for exemption from major food allergen labeling.</SUBJECT>
          <P>(a) <E T="03">Submission of petition</E>. Any person may petition the appropriate TTB officer to exempt a particular product or class of products from the labeling requirements of § 4.32a. The burden is on the petitioner to provide scientific evidence (including the analytical method used to produce the evidence) that demonstrates that the finished product or class of products, as derived by the method specified in the petition, either:</P>
          <P>(1) Does not cause an allergic response that poses a risk to human health; or</P>
          <P>(2) Does not contain allergenic protein derived from one of the foods identified in § 4.32a(a)(1)(i), even though a major food allergen was used in production.</P>
          <P>(b) <E T="03">Decision on petition.</E> TTB will approve or deny a petition for exemption submitted under paragraph (a) of this section in writing within 180 days of receipt of the petition. If TTB does not provide a written response to the petitioner within that 180-day period, the petition will be deemed denied, unless an extension of time for decision is mutually agreed upon by the appropriate TTB officer and the petitioner. TTB may confer with the Food and Drug Administration (FDA) on petitions for exemption, as appropriate and as FDA resources permit. TTB may require the submission of product samples and other additional information in support of a petition; however, unless required by TTB, the submission of samples or additional information by the petitioner after submission of the petition will be treated as the withdrawal of the initial petition and the submission of a new petition. An approval or denial under this section will constitute a final agency action.</P>
          <P>(c) <E T="03">Resubmission of a petition.</E> After a petition for exemption is denied under this section, the petitioner may resubmit the petition along with supporting materials for reconsideration at any <PRTPAGE P="28"/>time. TTB will treat this submission as a new petition for purposes of the time frames for decision set forth in paragraph (b) of this section.</P>
          <P>(d) <E T="03">Availability of information</E>—(1) <E T="03">General.</E> TTB will promptly post to its public Web site, <E T="03">http://www.ttb.gov,</E> all petitions received under this section as well as TTB's responses to those petitions. Any information submitted in support of the petition that is not posted to the TTB Web site will be available to the public pursuant to 5 U.S.C. 552, except where a request for confidential treatment is granted under paragraph (d)(2) of this section.</P>
          <P>(2) <E T="03">Requests for confidential treatment of business information.</E> A person who provides trade secrets or other commercial or financial information in connection with a petition for exemption under this section may request that TTB give confidential treatment to that information. A failure to request confidential treatment at the time the information in question is submitted to TTB will constitute a waiver of confidential treatment. A request for confidential treatment of information under this section must conform to the following standards:</P>
          <P>(i) The request must be in writing;</P>
          <P>(ii) The request must clearly identify the information to be kept confidential;</P>
          <P>(iii) The request must relate to information that constitutes trade secrets or other confidential commercial or financial information regarding the business transactions of an interested person, the disclosure of which would cause substantial harm to the competitive position of that person;</P>
          <P>(iv) The request must set forth the reasons why the information should not be disclosed, including the reasons the disclosure of the information would prejudice the competitive position of the interested person; and</P>
          <P>(v) The request must be supported by a signed statement by the interested person, or by an authorized officer or employee of that person, certifying that the information in question is a trade secret or other confidential commercial or financial information and that the information is not already in the public domain.</P>
          <CITA>[T.D. TTB-53, 71 FR 42267, July 26, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.33</SECTNO>
          <SUBJECT>Brand names.</SUBJECT>
          <P>(a) <E T="03">General.</E> The product shall bear a brand name, except that if not sold under a brand name, then the name of the person required to appear on the brand label shall be deemed a brand name for the purpose of this part.</P>
          <P>(b) <E T="03">Misleading brand names.</E> No label shall contain any brand name, which, standing alone, or in association with other printed or graphic matter creates any impression or inference as to the age, origin, identity, or other characteristics of the product unless the appropriate TTB officer finds that such brand name, either when qualified by the word “brand” or when not so qualified, conveys no erroneous impressions as to the age, origin, identity, or other characteristics of the product.</P>
          <P>(c) <E T="03">Trade name of foreign origin.</E> This section shall not operate to prohibit the use by any person of any trade name or brand of foreign origin not effectively registered in the United States Patent Office on August 29, 1935, which has been used by such person or his predecessors in the United States for a period of at least five years immediately preceding August 29, 1935: <E T="03">Provided,</E> That if such trade name or brand is used, the designation of the product shall be qualified by the name of the locality in the United States in which produced, and such qualifications shall be in script, type, or printing as conspicuous as the trade name or brand.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.34</SECTNO>
          <SUBJECT>Class and type.</SUBJECT>

          <P>(a) The class of the wine shall be stated in conformity with subpart C of this part if the wine is defined therein, except that “table” (“light”) and “dessert” wines need not be designated as such. In the case of still grape wine there may appear, in lieu of the class designation, any varietal (grape type) designation, type designation of varietal significance, semigeneric geographic type designation, or geographic distinctive designation, to which the wine may be entitled. In the case of champagne, or crackling wines, the type designation “champagne” or “crackling wine” (“petillant wine”, “frizzante wine”) may appear in lieu of the class designation “sparkling wine”. In the case of wine which has a total solids content of more than 17 grams <PRTPAGE P="29"/>per 100 cubic centimeters the words “extra sweet”, “specially sweetened”, “specially sweet” or “sweetened with excess sugar” shall be stated as a part of the class and type designation. The last of these quoted phrases shall appear where required by part 24 of this chapter, on wines sweetened with sugar in excess of the maximum quantities specified in such regulations. If the class of the wine is not defined in subpart C, a truthful and adequate statement of composition shall appear upon the brand label of the product in lieu of a class designation. In addition to the mandatory designation for the wine, there may be stated a distinctive or fanciful name, or a designation in accordance with trade understanding. The statement of composition will not include any reference to a varietal (grape type) designation, type designation of varietal significance, semi-generic geographic type designation, or geographic distinctive designation. All parts of the designation of the wine, whether mandatory or optional, shall be in direct conjunction and in lettering substantially of the same size and kind.</P>
          <P>(b) An appellation of origin such as “American,” “New York,” “Napa Valley,” or “Chilean,” disclosing the true place of origin of the wine, shall appear in direct conjunction with and in lettering substantially as conspicuous as the class and type designation if:</P>
          <P>(1) A varietal (grape type) designation is used under the provisions of § 4.23;</P>
          <P>(2) A type designation of varietal significance is used under the provisions of § 4.28;</P>
          <P>(3) A semi-generic type designation is employed as the class and type designation of the wine pursuant to § 4.24(b);</P>
          <P>(4) A product name is qualified with the word “Brand” under the requirements of § 4.39 (j); or</P>
          <P>(5) The wine is labeled with the year of harvest of the grapes, and otherwise conforms with the provisions of § 4.27. The appellation of origin for vintage wine shall be other than a country.</P>
          <CITA>[T.D. ATF-53, 43 FR 37677, Aug. 23, 1978; T.D. ATF-48, 44 FR 55839, Sept. 28, 1979, as amended by T.D. ATF-195, 50 FR 763, Jan. 7, 1985; T.D. ATF-229, 51 FR 20482, June 5, 1986; T.D. ATF-312, 56 FR 31077, July 9, 1991; T.D. ATF-370, 61 FR 539, Jan. 8, 1996; T.D. ATF-431, 65 FR 59724, Oct. 6, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.35</SECTNO>
          <SUBJECT>Name and address.</SUBJECT>
          <P>(a) <E T="03">American wine</E>—(1) <E T="03">Mandatory statement.</E> A label on each container of American wine shall state either “bottled by” or “packed by” followed by the name of the bottler or packer and the address (in accordance with paragraph (c)) of the place where the wine was bottled or packed. Other words may also be stated in addition to the required words “bottled by” or “packed by” and the required name and address if the use of such words is in accordance with paragraph (a)(2) of this section.</P>
          <P>(2) <E T="03">Optional statements.</E> (i) In addition to the statement required by paragraph (a)(1), the label may also state the name and address of any other person for whom the wine was bottled or packed, immediately preceded by the words “bottled for” or “packed for” or “distributed by.”</P>
          <P>(ii) The words defined in paragraphs (a)(2)(iii)-(a)(2)(vi) may be used, in accordance with the definitions given, in addition to the name and address statement required by paragraph (a)(1). Use of these words may be conjoined, using the word “and”, and with the words “bottled by” or “packed by” only if the same person performed the defined operation at the same address. More than one name is necessary if the defined operation was performed by a person other than the bottler or packer and more than one address statement is necessary if the defined operation was performed at a different address.</P>
          <P>(iii) <E T="03">Produced</E> or <E T="03">Made</E> means that the named winery:</P>
          <P>(A) Fermented not less than 75% of such wine at the stated address, or</P>

          <P>(B) Changed the class or type of the wine by addition of alcohol, brandy, flavors, colors, or artificial carbonation at the stated address, or<PRTPAGE P="30"/>
          </P>
          <P>(C) Produced sparkling wine by secondary fermentation at the stated address.</P>
          <P>(iv) <E T="03">Blended</E> means that the named winery mixed the wine with other wines of the same class and type at the stated address.</P>
          <P>(v) <E T="03">Cellared, Vinted</E> or <E T="03">Prepared</E> means that the named winery, at the stated address, subjected the wine to cellar treatment in accordance with § 4.22(c).</P>
          <P>(b) <E T="03">Imported wine</E>—(1) <E T="03">Mandatory statements.</E> (i) A label on each container of imported wine shall state “imported by” or a similar appropriate phrase, followed immediately by the name of the importer, agent, sole distributor, or other person responsible for the importation, followed immediately by the address of the principal place of business in the United States of the named person.</P>
          <P>(ii) If the wine was bottled or packed in the United States, the label shall also state one of the following:</P>
          <P>(A) “Bottled by” or “packed by” followed by the name of the bottler or packer and the address (in accordance with paragraph (c)) of the place where the wine was bottled or packed; or</P>
          <P>(B) If the wine was bottled or packed for the person responsible for the importation, the words “imported by and bottled (packed) in the United States for” (or a similar appropriate phrase) followed by the name and address of the principal place of business in the United States of the person responsible for the importation; or</P>
          <P>(C) If the wine was bottled or packed by the person responsible for the importation, the words “imported and bottled (packed) by” followed by the name and address of the principal place of business in the United States of the person responsible for the importation.</P>
          <P>(iii) If the wine was blended, bottled or packed in a foreign country other than the country of origin, and the label identifies the country of origin, the label shall state “blended by,” “bottled by,” or “packed by,” or other appropriate statement, followed by the name of the blender, bottler or packer and the place where the wine was blended, bottled or packed.</P>
          <P>(2) <E T="03">Optional statements.</E> In addition to the statements required by paragraph (b) (1), the label may also state the name and address of the principal place of business of the foreign producer. Other words, or their English-language equivalents, denoting winemaking operations may be used in accordance with the requirements of the country of origin, for wines sold within the country of origin.</P>
          <P>(c) <E T="03">Form of address.</E> The “place” stated shall be the post office address shown on the basic permit or other qualifying document of the premises at which the operations took place; and there shall be shown the address for each operation which is designated on the label. An example of such use would be “Produced at Gilroy, California, and bottled at San Mateo, California, by XYZ Winery,” except that the street address may be omitted. No additional places or addresses shall be stated for the same person unless:</P>
          <P>(1) Such person is actively engaged in the conduct of an additional bona fide and actual alcoholic beverage business at such additional place or address, and</P>
          <P>(2) The label also contains in direct conjunction therewith, appropriate descriptive material indicating the function occurring at such additional place or address in connection with the particular product.</P>
          <P>(d) <E T="03">Trade or operating names.</E> The trade or operating name of any person appearing upon any label shall be identical with a name appearing on the basic permit or other qualifying document.</P>
          <P>(e) The provisions of this section are optional until they become mandatory July 27, 1994.</P>
          <CITA>[T.D. ATF-328, 57 FR 33114, July 27, 1992; 57 FR 37591, Aug. 19, 1992. Redesignated by T.D. ATF-953, 68 FR 39455, July 2, 2003]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.36</SECTNO>
          <SUBJECT>Alcoholic content.</SUBJECT>
          <P>(a) Alcoholic content shall be stated in the case of wines containing more than 14 percent of alcohol by volume, and, in the case of wine containing 14 percent or less of alcohol by volume, either the type designation “table” wine (“light” wine) or the alcoholic content shall be stated. Any statement of alcoholic content shall be made as prescribed in paragraph (b) of this section.</P>

          <P>(b) Alcoholic content shall be stated in terms of percentage of alcohol by <PRTPAGE P="31"/>volume, and not otherwise, as provided in either paragraph (b)(1) or (2) of this section:</P>

          <P>(1) “Alcohol __ % by volume,” or similar appropriate phrase; <E T="03">Provided,</E> that if the word “alcohol” and/or “volume” are abbreviated, they shall be shown as “alc.” (alc) and/or “vol.” (vol), respectively. Except as provided in paragraph (c) of this section, a tolerance of 1 percent, in the case of wines containing more than 14 percent of alcohol by volume, and of 1.5 percent, in the case of wines containing 14 percent or less of alcohol by volume, will be permitted either above or below the stated percentage.</P>

          <P>(2) “Alcohol __ % to __ % by volume,” or similar appropriate phrase; <E T="03">Provided,</E> that if the word “alcohol” and/or “volume” are abbreviated, they shall be shown as “alc.” (alc) and/or “vol.” (vol), respectively. Except as provided in paragraph (c) of this section, a range of not more than 2 percent, in the case of wines containing more than 14 percent of alcohol by volume, and of not more than 3 percent, in the case of wines containing 14 percent or less of alcohol by volume, will be permitted between the minimum and maximum percentages stated, and no tolerances will be permitted either below such minimum or above such maximum.</P>
          <P>(c) Regardless of the type of statement used and regardless of tolerances normally permitted in direct statements and ranges normally permitted in maximum and minimum statements, alcoholic content statements, whether required or optional, shall definitely and correctly indicate the class, type and taxable grade of the wine so labeled and nothing in this section shall be construed as authorizing the appearance upon the labels of any wine of an alcoholic content statement in terms of maximum and minimum percentages which overlaps a prescribed limitation on the alcoholic content of any class, type, or taxable grade of wine, or a direct statement of alcoholic content which indicates that the alcoholic content of the wine is within such a limitation when in fact it is not.</P>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. ATF-275, 53 FR 27046, July 18, 1988]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.37</SECTNO>
          <SUBJECT>Net contents.</SUBJECT>
          <P>(a) <E T="03">Statement of net contents.</E> The net contents of wine for which a standard of fill is prescribed in § 4.73 shall be stated in the same manner and form as set forth in the standard of fill. The net content of wine for which no standard of fill is prescribed in § 4.73 shall be stated in the metric system of measure as follows:</P>
          <P>(1) If more than one liter, net contents shall be stated in liters and in decimal portions of a liter accurate to the nearest one-hundredth of a liter.</P>
          <P>(2) If less than one liter, net contents shall be stated in milliliters (ml).</P>
          <P>(b) <E T="03">Statement of U.S. equivalent net contents.</E> When net contents of wine are stated in metric measure, the equivalent volume in U.S. measure may also be shown. If shown, the U.S. equivalent volume will be shown as follows:</P>
          <P>(1) For the metric standards of fill: 3 liters (101 fl. oz.); 1.5 liters (50.7 fl. oz.); 1 liter (33.8 fl. oz.); 750 ml (25.4 fl. oz.); 500 ml (16.9 fl. oz.); 375 ml (12.7 fl. oz.); 187 ml (6.3 fl. oz.); 100 ml (3.4 fl. oz.); and 50 ml (1.7 fl. oz.).</P>
          <P>(2) Equivalent volumes of less than 100 fluid ounces will be stated in fluid ounces only, accurate to the nearest one-tenth of a fluid ounce; for example, 700 ml (23.7 fl. oz.).</P>
          <P>(3) Equivalent volumes of 100 fluid ounces or more will be stated in fluid ounces only, accurate to the nearest whole fluid ounce; for example, 6 liters (203 fl. oz.).</P>
          <P>(c) <E T="03">Net contents marked in bottle.</E> The net contents need not be stated on any label if the net contents are displayed by having the same blown, etched, sand-blasted, marked by underglaze coloring, or otherwise permanently marked by any method approved by the appropriate TTB officer, in the sides, front, or back of the bottle, in letters and figures in such manner as to be plainly legible under ordinary circumstances, and such statement is not obscured in any manner in whole or in part.<PRTPAGE P="32"/>
          </P>
          <P>(d) <E T="03">Tolerances.</E> Statement of net contents shall indicate exactly the volume of wine within the container, except that the following tolerances shall be allowed:</P>
          <P>(1) Discrepancies due exclusively to errors in measuring which occur in filling conducted in compliance with good commercial practice.</P>

          <P>(2) Discrepancies due exclusively to differences in the capacity of containers, resulting solely from unavoidable difficulties in manufacturing such containers so as to be of uniform capacity: <E T="03">Provided,</E> That no greater tolerance shall be allowed in case of containers which, because of their design, cannot be made of approximately uniform capacity than is allowed in case of containers which can be manufactured so as to be of approximately uniform capacity.</P>
          <P>(3) Discrepancies in measure due to differences in atmospheric conditions in various places and which unavoidably result from the ordinary and customary exposure of alcoholic beverages in containers to evaporation. The reasonableness to discrepancies under this paragraph shall be determined on the facts in each case.</P>
          <P>(e) <E T="03">Unreasonable shortages.</E> Unreasonable shortages in certain of the containers in any shipment shall not be compensated by overages in other containers in the same shipment.</P>
          <CITA>[T.D. ATF-12, 39 FR 45222, Dec. 31, 1974, as amended by T.D. ATF-49, 43 FR 19848, May 9, 1978; T.D. ATF-76, 46 FR 1727, Jan. 7, 1981; T.D. ATF-303, 55 FR 42713, Oct. 23, 1990]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.38</SECTNO>
          <SUBJECT>General requirements.</SUBJECT>
          <P>(a) <E T="03">Legibility.</E> All labels shall be so designed that all the statements thereon required by §§ 4.30 through 4.39 are readily legible under ordinary conditions, and all such statement shall be on a contrasting background.</P>
          <P>(b) <E T="03">Size of type.</E> (1) Containers of more than 187 milliliters. All mandatory information required on labels by this part, except the alcoholic content statement, shall be in script, type, or printing not smaller than 2 millimeters; except that if contained among other descriptive or explanatory information, the script, type, or printing of the mandatory information shall be of a size substantially more conspicuous than that of the descriptive or explanatory information.</P>
          <P>(2) Containers of 187 milliliters or less. All mandatory information required on labels by this part, except the alcoholic content statement, shall not be smaller than 1 millimeter, except that if contained among other descriptive or explanatory information, the script, type, or printing of the mandatory information shall be of a size substantially more conspicuous than that of the descriptive or explanatory information.</P>
          <P>(3) Alcoholic content statements shall not appear in script, type, or printing larger or more conspicuous than 3 millimeters nor smaller than 1 millimeter on labels of containers having a capacity of 5 liters or less and shall not be set off with a border or otherwise accentuated.</P>
          <P>(c) <E T="03">English language.</E> All mandatory label information shall be stated on labels in the English language, except that the brand name, the place of production, and the name of the manufacturer, producer, blender, bottler, packer, or shipper appearing on the label need not be in the English language if the words “product of” immediately precede the name of the country of origin stated in accordance with customs requirements. Additional statements in foreign languages may be made on labels, if they do not in any way conflict with, or contradict the requirements of §§ 4.30 through 4.39.</P>
          <P>(d) <E T="03">Location of label.</E> Labels shall not obscure Government stamps nor be obscured thereby.</P>
          <P>(e) <E T="03">Labels firmly affixed.</E> All labels shall be affixed to containers of wine in such manner that they cannot be removed without thorough application of water or other solvents.</P>
          <P>(f) <E T="03">Additional information on labels.</E> Labels may contain information other than the mandatory label information required by §§ 4.30 through 4.39, if such information complies with the requirements of such sections and does not conflict with, nor in any manner qualify statements required by this part. In addition, information which is truthful, accurate, and specific, and which is neither disparaging nor misleading may appear on wine labels.<PRTPAGE P="33"/>
          </P>
          <P>(g) <E T="03">Representations as to materials.</E> If any representation (other than representations or information required by §§ 4.30 through 4.39 or percentage statements required or permitted by this part) is made as to the presence, excellence, or other characteristic of any ingredient in any wine, or used in its production, the label containing such representation shall state, in print, type, or script, substantially as conspicuous as such representation, the name and amount in percent by volume of each such ingredient.</P>
          <P>(h) <E T="03">Statement of contents of containers.</E> Upon request of the appropriate TTB officer, there shall be submitted a full and accurate statement of the contents of the containers to which labels are to be or have been affixed.</P>
          <CITA>[T.D. ATF-53, 43 FR 37677, Aug. 23, 1978, as amended by T.D. ATF-66, 45 FR 40544, June 13, 1980; T.D. ATF-94, 46 FR 55095, Nov. 6, 1981; T.D. ATF-249, 52 FR 5955, Feb. 27, 1987; T.D. ATF-275, 53 FR 27046, July 18, 1988; T.D. ATF-312, 56 FR 31077, July 9, 1991]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.38a</SECTNO>
          <SUBJECT>Bottle cartons, booklets and leaflets.</SUBJECT>
          <P>(a) <E T="03">General.</E> An individual covering, carton, or other container of the bottle used for sale at retail (other than a shipping container), or any written, printed, graphic, or other matter accompanying the bottle to the consumer buyer shall not contain any statement, design, device, or graphic, pictorial, or emblematic representation that is prohibited by §§ 4.30 through 4.39 on labels.</P>
          <P>(b) <E T="03">Sealed cartons.</E> If bottles are enclosed in sealed opaque coverings, cartons, or other containers used for sale at retail (other than a shipping container), such coverings, cartons, or other containers must bear all mandatory label information.</P>
          <P>(c) <E T="03">Other cartons.</E> (1) If an individual covering, carton, or other container of the bottle used for sale at retail (other than a shipping container) is so designed that the bottle is readily removable, it may display any information which is not in conflict with the label on the bottle contained therein.</P>
          <P>(2) Cartons displaying brand names and/or designations must display such names and designations in their entirety—brand names required to be modified, e.g. by “Brand” or “Product of U.S.A.”, must also display such modification.</P>
          <P>(3) Wines for which a truthful and adequate statement of composition is required must display such statement.</P>
          <CITA>[T.D. ATF-36, 41 FR 47425, Oct. 29, 1976]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.39</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <P>(a) <E T="03">Statements on labels.</E> Containers of wine, or any label on such containers, or any individual covering, carton, or other wrapper of such container, or any written, printed, graphic, or other matter accompanying such container to the consumer shall not contain:</P>
          <P>(1) Any statement that is false or untrue in any particular, or that, irrespective of falsity, directly, or by ambiguity, omission, or inference, or by the addition of irrelevant, scientific or technical matter, tends to create a misleading impression.</P>
          <P>(2) Any statement that is disparaging of a competitor's products.</P>
          <P>(3) Any statement, design, device, or representation which is obscene or indecent.</P>
          <P>(4) Any statement, design, device, or representation of or relating to analyses, standards, or tests, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer.</P>
          <P>(5) Any statement, design, device or representation of or relating to any guarantee, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer. Money-back guarantees are not prohibited.</P>

          <P>(6) A trade or brand name that is the name of any living individual of public prominence, or existing private or public organization, or is a name that is in simulation or is an abbreviation thereof, or any graphic, pictorial, or emblematic representation of any such individual or organization, if the use of such name or representation is likely falsely to lead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of, such individual or organization; <E T="03">Provided,</E> That this paragraph shall not apply to <PRTPAGE P="34"/>the use of the name of any person engaged in business as a producer, blender, rectifier, importer, wholesaler, retailer, bottler, or warehouseman of wine, nor to the use by any person of a trade or brand name that is the name of any living individual of public prominence or existing private or public organization, provided such trade or brand name was used by him or his predecessors in interest prior to August 29, 1935.</P>
          <P>(7) Any statement, design, device, or representation (other than a statement of alcohol content in conformity with § 4.36), which tends to create the impression that a wine:</P>
          <P>(i) Contains distilled spirits;</P>
          <P>(ii) Is comparable to a distilled spirit; or</P>
          <P>(iii) Has intoxicating qualities.</P>
          <FP>However, if a statement of composition is required to appear as the designation of a product not defined in these regulations, such statement of composition may include a reference to the type of distilled spirits contained therein.</FP>
          <P>(8) Any coined word or name in the brand name or class and type designation which simulates, imitates, or which tends to create the impression that the wine so labeled is entitled to bear, any class, type, or permitted designation recognized by the regulations in this part unless such wine conforms to the requirements prescribed with respect to such designation and is in fact so designated on its labels.</P>
          <P>(9) Any word in the brand name or class and type designation which is the name of a distilled spirits product or which simulates, imitates, or created the impression that the wine so labeled is, or is similar to, any product customarily made with a distilled spirits base. Examples of such words are: “Manhattan,” “Martini,” and “Daquiri” in a class and type designation or brand name of a wine cocktail; “Cuba Libre,” “Zombie,” and “Collins” in a class and type designation or brand name of a wine specialty or wine highball; “creme,” “cream,” “de,” or “of” when used in conjunction with “menthe,” “mint,” or “cacao” in a class and type designation or a brand name of a mint or chocolate flavored wine specialty.</P>
          <P>(b) <E T="03">Statement of age.</E> No statement of age or representation relative to age (including words or devices in any brand name or mark) shall be made, except (1) for vintage wine, in accordance with the provisions of § 4.27; (2) references relating to methods of wine production involving storage or aging in accordance with § 4.38(f); or (3) use of the word “old” as part of a brand name.</P>
          <P>(c) <E T="03">Statement of bottling dates.</E> The statement of any bottling date shall not be deemed to be a representation relative to age, if such statement appears in lettering not greater than 8-point Gothic caps and in the following form: “Bottled in __” (inserting the year in which the wine was bottled).</P>
          <P>(d) <E T="03">Statement of miscellaneous dates.</E> No date, except as provided in paragraphs (b) and (c) of this section with respect to statement of vintage year and bottling date, shall be stated on any label unless in addition thereto and in direct conjunction therewith in the same size and kind of printing, there shall be stated an explanation of the significance thereof such as “established” or “founded in”. If any such date refers to the date of establishment of any business or brand name, it shall not be stated, in the case of containers of a capacity of 5 liters or less, in any script, type, or printing larger than 2 millimeters, and shall be stated in direct conjunction with the name of the person, company, or brand name to which it refers if the appropriate TTB officer finds that this is necessary in order to prevent confusion as to the person, company, or brand name to which the establishment date is applicable.</P>
          <P>(e) <E T="03">Simulation of Government stamps.</E> (1) No labels shall be of such design as to resemble or simulate a stamp of the United States Government or any State or foreign government. No label, other than stamps authorized or required by the United States Government or any State or foreign government, shall state or indicate that the wine contained in the labeled container is produced, blended, bottled, packed, or sold under, or in accordance with, any municipal, State or Federal Government authorization, law, or regulation, unless such statement is required <PRTPAGE P="35"/>or specifically authorized by Federal, State or municipal law or regulation, or is required or specifically authorized by the laws or regulations of a foreign country. If the municipal, State, or Federal Government permit number is stated upon a label, it shall not be accompanied by any additional statement relating thereto.</P>
          <P>(2) Bonded wine cellar and bonded winery numbers may be stated but only in direct conjunction with the name and address of the person operating such wine cellar or winery. Statement of bonded wine cellar or winery numbers may be made in the following form: “Bonded Wine Cellar No. __”, “Bonded Winery No. __”, “B. W. C. No. __”, “B. W. No. __”. No additional reference thereto shall be made, nor shall any use be made of such statement that may convey the impression that the wine has been made or matured under Government supervision or in accordance with Government specifications or standards.</P>

          <P>(3) If imported wines are covered by a certificate of origin and/or a certificate of vintage date issued by a duly authorized official of the appropriate foreign government, the label, except where prohibited by the foreign government, may refer to such certificate or the fact of such certification, but shall not be accompanied by any additional statements relating thereto. The reference to such certificate or certification shall be substantially in the following form:
          </P>
          <EXTRACT>
            <P>This product accompanied at the time of the importation by a certificate issued by the</P>
            <FP SOURCE="FP-DASH"/>
            <HD SOURCE="HD3">(Name of government)</HD>
            <P>government indicating that the product is</P>
            <FP SOURCE="FP-DASH"/>
            <HD SOURCE="HD3">(Class and type as stated on the label)</HD>
            <P>and (if label bears a statement of vintage date) that the wine is of the vintage of</P>
            <FP SOURCE="FP-DASH"/>
            <HD SOURCE="HD3">(Year of vintage stated on the label)</HD>
          </EXTRACT>
          
          <P>(f) <E T="03">Use of the word “Importer”, or similar words.</E> The word <E T="03">Importer,</E> or similar words, shall not be stated on labels on containers of domestic wine except as part of the bona fide name of a permittee for or by whom, or of a retailer for whom, such wine is bottled, packed or distributed: <E T="03">Provided,</E> That in all cases where such words are used as part of such name, there shall be stated on the same label the words “Product of the United States”, or similar words to negative any impression that the product is imported, and such negative statement shall appear in the same size and kind of printing as such name.</P>
          <P>(g) <E T="03">Flags, seals, coats of arms, crests, and other insignia.</E> Labels shall not contain, in the brand name or otherwise, any statement, design, device, or pictorial representation which the appropriate TTB officer finds relates to, or is capable of being construed as relating to, the armed forces of the United States, or the American flag, or any emblem, seal, insignia, or decoration associated with such flag or armed forces; nor shall any label contain any statement, design, device, or pictorial representation of or concerning any flag, seal, coat of arms, crest or other insignia, likely to mislead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of the government, organization, family, or individual with whom such flag, seal, coat of arms, crest, or insignia is associated.</P>
          <P>(h) <E T="03">Health-related statements</E>—(1) <E T="03">Definitions.</E> When used in this paragraph (h), terms are defined as follows:</P>
          <P>(i) <E T="03">Health-related statement</E> means any statement related to health (other than the warning statement required by § 16.21 of this chapter) and includes statements of a curative or therapeutic nature that, expressly or by implication, suggest a relationship between the consumption of alcohol, wine, or any substance found within the wine, and health benefits or effects on health. The term includes both specific health claims and general references to alleged health benefits or effects on health associated with the consumption of alcohol, wine, or any substance found within the wine, as well as health-related directional statements. The term also includes statements and claims that imply that a physical or psychological sensation results from <PRTPAGE P="36"/>consuming the wine, as well as statements and claims of nutritional value (<E T="03">e.g.,</E> statements of vitamin content). Statements concerning caloric, carbohydrate, protein, and fat content do not constitute nutritional claims about the product.</P>
          <P>(ii) <E T="03">Specific health claim</E> is a type of health-related statement that, expressly or by implication, characterizes the relationship of the wine, alcohol, or any substance found within the wine, to a disease or health-related condition. Implied specific health claims include statements, symbols, vignettes, or other forms of communication that suggest, within the context in which they are presented, that a relationship exists between wine, alcohol, or any substance found within the wine, and a disease or health-related condition.</P>
          <P>(iii) <E T="03">Health-related directional statement</E> is a type of health-related statement that directs or refers consumers to a third party or other source for information regarding the effects on health of wine or alcohol consumption.</P>
          <P>(2) <E T="03">Rules for labeling</E>—(i) <E T="03">Health-related statements.</E> In general, labels may not contain any health-related statement that is untrue in any particular or tends to create a misleading impression as to the effects on health of alcohol consumption. TTB will evaluate such statements on a case-by-case basis and may require as part of the health-related statement a disclaimer or some other qualifying statement to dispel any misleading impression conveyed by the health-related statement.</P>
          <P>(ii) <E T="03">Specific health claims.</E> (A) TTB will consult with the Food and Drug Administration (FDA), as needed, on the use of a specific health claim on a wine label. If FDA determines that the use of such a labeling claim is a drug claim that is not in compliance with the requirements of the Federal Food, Drug, and Cosmetic Act, TTB will not approve the use of that specific health claim on a wine label.</P>
          <P>(B) TTB will approve the use of a specific health claim on a wine label only if the claim is truthful and adequately substantiated by scientific or medical evidence; sufficiently detailed and qualified with respect to the categories of individuals to whom the claim applies; adequately discloses the health risks associated with both moderate and heavier levels of alcohol consumption; and outlines the categories of individuals for whom any levels of alcohol consumption may cause health risks. This information must appear as part of the specific health claim.</P>
          <P>(iii) <E T="03">Health-related directional statements.</E> A statement that directs consumers to a third party or other source for information regarding the effects on health of wine or alcohol consumption is presumed misleading unless it—</P>
          <P>(A) Directs consumers in a neutral or other non-misleading manner to a third party or other source for balanced information regarding the effects on health of wine or alcohol consumption; and</P>
          <P>(B)(<E T="03">1</E>) Includes as part of the health-related directional statement the following disclaimer: “This statement should not encourage you to drink or to increase your alcohol consumption for health reasons;” or</P>
          <P>(<E T="03">2</E>) Includes as part of the health-related directional statement some other qualifying statement that the appropriate TTB officer finds is sufficient to dispel any misleading impression conveyed by the health-related directional statement.</P>
          <P>(i) <E T="03">Geographic brand names.</E> (1) Except as provided in subparagraph 2, a brand name of viticultural significance may not be used unless the wine meets the appellation of origin requirements for the geographic area named.</P>
          <P>(2) For brand names used in existing certificates of label approval issued prior to July 7, 1986:</P>
          <P>(i) The wine shall meet the appellation of origin requirements for the geographic area named; or</P>
          <P>(ii) The wine shall be labeled with an appellation of origin in accordance with § 4.34(b) as to location and size of type of either:</P>
          <P>(A) A county or a viticultural area, if the brand name bears the name of a geographic area smaller than a state, or;</P>
          <P>(B) A state, county or a viticultural area, if the brand name bears a state name; or</P>

          <P>(iii) The wine shall be labeled with some other statement which the appropriate TTB officer finds to be sufficient to dispel the impression that the geographic area suggested by the brand <PRTPAGE P="37"/>name is indicative of the origin of the wine.</P>
          <P>(3) A name has viticultural significance when it is the name of a state or county (or the foreign equivalents), when approved as a viticultural area in part 9 of this chapter, or by a foreign government, or when found to have viticultural significance by the appropriate TTB officer.</P>
          <P>(j) <E T="03">Product names of geographical significance (not mandatory before January 1, 1983).</E> The use of product names with specific geographical significance is prohibited unless the appropriate TTB officer finds that because of their long usage, such names are recognized by consumers as fanciful product names and not representations as to origin. In such cases the product names shall be qualified with the word “brand” immediately following the product name, in the same size of type, and as conspicuous as the product name itself. In addition, the label shall bear an appellation of origin under the provisions of § 4.34(b), and, if required by the appropriate TTB officer, a statement disclaiming the geographical reference as a representation as to the origin of the wine.</P>
          <P>(k) <E T="03">Other indications of origin.</E> Other statements, designs, devices or representations which indicate or infer an origin other than the true place of origin of the wine are prohibited.</P>
          <P>(l) <E T="03">Foreign terms.</E> Foreign terms which: (1) Describe a particular condition of the grapes at the time of harvest (such as “Auslese,” “Eiswein,” and “Trockenbeerenauslese”); or (2) denote quality under foreign law (such as “Qualitatswein” and “Kabinett”) may not be used on the labels of American wine.</P>
          <P>(m) <E T="03">Use of a vineyard, orchard, farm or ranch name.</E> When used in a brand name, a vineyard, orchard, farm or ranch name having geographical or viticultural significance is subject to the requirements of §§ 4.33(b) and 4.39(i) of this part. Additionally, the name of a vineyard, orchard, farm or ranch shall not be used on a wine label, unless 95 percent of the wine in the container was produced from primary winemaking material grown on the named vineyard, orchard, farm or ranch.</P>
          <P>(n) <E T="03">Use of a varietal name, type designation of varietal significance, semi-generic name, or geographic distinctive designation.</E> Labels that contain in the brand name, product name, or distinctive or fanciful name, any varietal (grape type) designation, type designation of varietal significance, semi-generic geographic type designation, or geographic distinctive designation, are misleading unless the wine is made in accordance with the standards prescribed in classes 1, 2, or 3 of § 4.21. Any other use of such a designation on other than a class 1, 2, or 3 wine is presumed misleading.</P>
          <CITA>[T.D. 6521, 25 FR 13841, Dec. 29, 1960, as amended by T.D. ATF-53, 43 FR 37678, Aug. 23, 1978; T.D. ATF-94, 46 FR 55095, Nov. 6, 1981; T.D. ATF-126, 48 FR 2764, Jan. 21, 1983; T.D. ATF-180, 49 FR 31671, Aug. 8, 1984; T.D. ATF-229, 51 FR 20482, June 5, 1986; 51 FR 21547, June 13, 1986; T.D. ATF-355, 59 FR 14553, Mar. 29, 1994; T.D. ATF-431, 65 FR 59724, Oct. 6, 2000; TTB T.D.-1, 68 FR 10103, Mar. 3, 2003]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart E—Requirements for Withdrawal of Wine From Customs Custody</HD>
        <SECTION>
          <SECTNO>§ 4.40</SECTNO>
          <SUBJECT>Label approval and release.</SUBJECT>
          <P>(a) <E T="03">Certificate of label approval.</E> No imported beverage wine in containers shall be released from U.S. Customs custody for consumption unless there is deposited with the appropriate Customs officer at the port of entry the original or a photostatic copy of an approved certificate of label approval, TTB Form 5100.31.</P>
          <P>(b) If the original or photostatic copy of TTB Form 5100.31 has been approved, the brand or lot of imported wine bearing labels identical with those shown thereon may be released from U.S. Customs custody.</P>
          <P>(c) <E T="03">Relabeling.</E> Imported wine in U.S. Customs custody which is not labeled in conformity with certificates of label approval issued by the appropriate TTB officer must be relabeled prior to release under the supervision and direction of Customs officers of the port at which the wine is located.<PRTPAGE P="38"/>
          </P>
          <P>(d) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial, and revocation of certificates of label approval, as well as appeal procedures, see part 13 of this chapter.</P>
          <CITA>[T.D. ATF-66, 45 FR 40546, June 13, 1980, as amended by T.D. ATF-94, 46 FR 55095, Nov. 6, 1981; T.D. ATF-242, 51 FR 39525, Oct. 29, 1986; T.D. ATF-359, 59 FR 42160, Aug. 17, 1994; T.D. ATF-406, 64 FR 2128, Jan. 13, 1999]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.45</SECTNO>
          <SUBJECT>Certificates of origin, identity and proper cellar treatment.</SUBJECT>
          <P>(a) <E T="03">Origin and identity</E>. Imported wine shall not be released from customs custody for consumption unless the invoice is accompanied by a certificate of origin issued by a duly authorized official of the appropriate foreign government, if the issuance of such certificates with respect to such wine has been authorized by the foreign government concerned, certifying as to the identity of the wine and that the wine has been produced in compliance with the laws of the respective foreign government regulating the production of such wine for home consumption.</P>
          <P>(b) <E T="03">Certification of proper cellar treatment of natural wine</E>—(1) <E T="03">General.</E> An importer of wine may be required to have in his or her possession at the time of release of the wine from customs custody a certification or may have to comply with other conditions prescribed in § 27.140 of this chapter regarding proper cellar treatment. If imported wine requires a certification under § 27.140, the importer must provide a copy of that certification to TTB as follows:</P>
          <P>(i) The importer must attach a copy of the certification to the application for a certificate of label approval for the wine in question submitted under § 13.21 of this chapter; or</P>
          <P>(ii) If a certification for the wine in question was not available when the importer submitted the application for label approval, the importer must submit a copy of the certification to the appropriate TTB officer prior to release from customs custody of the first shipment of the wine.</P>
          <P>(2) <E T="03">Validity of certification</E>. A certification submitted under paragraph (b)(1) of this section is valid as long as the wine is of the same brand and class or type, was made by the same producer, was subjected to the same cellar treatment, and conforms to the statements made on the certification. Accordingly, if the cellar treatment of the wine changes and a new certification under § 27.140 is required, an importer is required to submit a new certification for the wine even though it is subject to the same label approval.</P>
          <P>(3) <E T="03">Use of certification</E>. TTB may use the information from a certification for purposes of verifying the appropriate class and type designation of the wine under the labeling provisions of this part. TTB will make certifications submitted under paragraph (b)(1) of this section available to the public on the TTB Internet Web site at <E T="03">www.ttb.gov.</E>
          </P>
          <CITA>[ T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. TTB-31, 70 FR 49482, Aug. 24, 2005]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.46</SECTNO>
          <SUBJECT>Certificate of nonstandard fill.</SUBJECT>
          <P>A person may import wine in containers not conforming to the metric standards of fill prescribed at § 4.73 if the wine is:</P>
          <P>(a) Accompanied by a statement signed by a duly authorized official of the appropriate foreign country, stating that the wine was bottled or packed before January 1, 1979;</P>
          <P>(b) Being withdrawn from a Customs bonded warehouse into which it was entered before January 1, 1979; or</P>
          <P>(c) Exempt from the standard of fill requirements as provided by § 4.70(b)(1) or (2).</P>
          <CITA>[T.D. ATF-76, 46 FR 1727, Jan. 7, 1981]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart F—Requirements for Approval of Labels of Wine Domestically Bottled or Packed</HD>
        <SECTION>
          <SECTNO>§ 4.50</SECTNO>
          <SUBJECT>Certificates of label approval.</SUBJECT>
          <P>(a) No person shall bottle or pack wine, other than wine bottled or packed in U.S. Customs custody, or remove such wine from the plant where bottled or packed, unless an approved certificate of label approval, TTB Form 5100.31, is issued by the appropriate TTB officer.</P>

          <P>(b) Any bottler or packer of wine shall be exempt from the requirements of this section if upon application the <PRTPAGE P="39"/>bottler or packer shows to the satisfaction of the appropriate TTB officer that the wine to be bottled or packed is not to be sold, offered for sale, or shipped or delivered for shipment, or otherwise introduced in interstate or foreign commerce. Application for exemption shall be made on TTB Form 5100.31 in accordance with instructions on the form. If the application is approved, a certificate of exemption will be issued on the same form.</P>
          <P>(c) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial, and revocation of certificates of label approval, and certificates of exemption from label approval, as well as appeal procedures, see part 13 of this chapter.</P>
          <CITA>[T.D. ATF-66, 45 FR 40546, June 13, 1980, as amended by T.D. ATF-94, 46 FR 55095, Nov. 6, 1981; T.D. ATF-242, 51 FR 39525, Oct. 29, 1986; T.D. ATF-344, 58 FR 40354, July 28, 1993; T.D. ATF-406, 64 FR 2128, Jan. 13, 1999; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.51</SECTNO>
          <SUBJECT>Exhibiting certificates to Government officials.</SUBJECT>
          <P>Any bottler or packer holding an original or duplicate original of a certificate of label approval or a certificate of exemption shall, upon demand, exhibit such certificate to a duly authorized representative of the United States Government.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.52</SECTNO>
          <SUBJECT>Photoprints.</SUBJECT>
          <P>Photoprints or other reproductions of certificates of label approval or certificates of exemption are not acceptable, for the purposes of §§ 4.50 through 4.52, as substitutes for an original or duplicate original of a certificate of label approval, or a certificate of exemption. The appropriate TTB officer will, upon the request of the bottler or packer, issue duplicate originals of certificates of label approval or of certificates of exemption if wine under the same brand is bottled or packed at more than one plant by the same person, and if the necessity for the duplicate originals is shown and there is listed with the appropriate TTB officer the name and address of the additional bottling or packing plant where the particular label is to be used.</P>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart G—Advertising of Wine</HD>
        <SECTION>
          <SECTNO>§ 4.60</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>No person engaged in the business as a producer, rectifier, blender, importer, or wholesaler of wine, directly or indirectly or through an affiliate, shall publish or disseminate or cause to be published or disseminated by radio or television broadcast, or in any newspaper, periodical, or any publication, by any sign or outdoor advertisement, or any other printed or graphic matter, any advertisement of wine, if such advertising is in, or is calculated to induce sale in, interstate or foreign commerce, or is disseminated by mail, unless such advertisement is in conformity with §§ 4.60-4.65 of this part. Provided, that such sections shall not apply to outdoor advertising in place on September 7, 1984, but shall apply upon replacement, restoration, or renovation of any such advertising; and provided further, that such sections shall not apply to a retailer or the publisher of any newspaper, periodical, or other publication, or radio or television broadcast, unless such retailer or publisher or radio or television broadcaster is engaged in business as a producer, rectifier, blender, importer, or wholesaler of wine, directly or indirectly, or through an affiliate.</P>
          <CITA>[T.D. ATF-180, 49 FR 31672, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.61</SECTNO>
          <SUBJECT>Definitions.</SUBJECT>
          <P>As used in §§ 4.60 through 4.65 of this part, the term <E T="03">advertisement</E> includes any written or verbal statement, illustration, or depiction which is in, or calculated to induce sales in, interstate or foreign commerce, or is disseminated by mail, whether it appears in a newspaper, magazine, trade booklet, menu, wine card, leaflet, circular, mailer, book insert, catalog, promotional material, sales pamphlet, or any written, printed, graphic, or other matter accompanying the container, representations made on cases, billboard, sign, or othe outdoor display, public transit card, other periodical literature, publication, or in a radio or television broadcast, or in any other media; except that such term shall not include:</P>

          <P>(a) Any label affixed to any container of wine, or any individual covering, <PRTPAGE P="40"/>carton, or other wrapper of such container which constitute a part of the labeling under provisions of §§ 4.30-4.39 of this part.</P>
          <P>(b) Any editorial or other reading material (<E T="03">i.e.,</E> news release) in any periodical or publication or newspaper for the publication of which no money or valuable consideration is paid or promised, directly or indirectly, by any permittee, and which is not written by or at the direction of the permittee.</P>
          <CITA>[T.D. ATF-180, 49 FR 31672, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.62</SECTNO>
          <SUBJECT>Mandatory statements.</SUBJECT>
          <P>(a) <E T="03">Responsible advertiser.</E> The advertisement shall state the name and address of the permittee responsible for its publication or broadcast. Street number and name may be omitted in the address.</P>
          <P>(b) <E T="03">Class, type, and distinctive designation.</E> The advertisement shall contain a conspicuous statement of the class, type, or distinctive designation to which the product belongs, corresponding with the statement of class, type, or distinctive designation which is required to appear on the label of the product.</P>
          <P>(c) <E T="03">Exception.</E> (1) If an advertisement refers to a general wine line or all of the wine products of one company, whether by the company name or by the brand name common to all the wine in the line, the only mandatory information necessary is the name and address of the responsible advertiser. This exception does not apply where only one type of wine is marketed under the specific brand name advertised.</P>
          <P>(2) On consumer specialty items, the only information necessary is the company name or brand name of the product.</P>
          <CITA>[T.D. 6521, 25 FR 13835, Dec. 29, 1960, as amended by T.D. ATF-180, 49 FR 31672, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.63</SECTNO>
          <SUBJECT>Legibility of mandatory information.</SUBJECT>
          <P>(a) Statements required under §§ 4.60 through 4.65 of this part to appear in any written, printed, or graphic advertisement shall be in lettering or type size sufficient to be conspicuous and readily legible.</P>
          <P>(b) In the case of signs, billboards, and displays the name and address of the permittee responsible for the advertisement may appear in type size of lettering smaller than the other mandatory information, provided such information can be ascertained upon closer examination of the sign or billboard.</P>
          <P>(c) Mandatory information shall be so stated as to be clearly a part of the advertisement and shall not be separated in any manner from the remainder of the advertisement.</P>
          <P>(d) Mandatory information for two or more products shall not be stated unless clearly separated.</P>
          <P>(e) Mandatory information shall be so stated in both the print and audio-visual media that it will be readily apparent to the persons viewing the advertisement.</P>
          <CITA>[T.D. ATF-180, 49 FR 31672, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.64</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <P>(a) <E T="03">Restrictions.</E> The advertisement of wine shall not contain:</P>
          <P>(1) Any statement that is false or untrue in any material particular, or that, irrespective of falsity, directly, or by ambiguity, omission, or inference, or by the addition of irrelevant, scientific or technical matter tends to create a misleading impression.</P>
          <P>(2) Any statement that is disparaging of a competitor's products.</P>
          <P>(3) Any statement, design, device, or representation which is obscene or indecent.</P>
          <P>(4) Any statement, design, device, or representation of or relating to analyses, standards, or tests, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer.</P>
          <P>(5) Any statement, design, device, or representation of or relating to any guarantee, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer. Money-back guarantees are not prohibited.</P>

          <P>(6) Any statement that the wine is produced, blended, bottled, packed, or sold under, or in accordance with, any <PRTPAGE P="41"/>municipal, State, or Federal Government authorization, law, or regulations; and if a municipal, State, or Federal permit number is stated, the permit number shall not be accompanied by any additional statement relating thereto.</P>
          <P>(7) Any statement of bonded winecellar and bonded winery numbers unless stated in direct conjunction with the name and address of the person operating such winery or storeroom. Statement of bonded winecellar and bonded winery numbers may be made in the following form: “Bonded Winecellar No. __,” “Bonded Winery No. __,” “B. W. C. No. __,” “B. W. No. __.” No additional reference thereto shall be made, nor shall any use be made of such statement that may convey the impression that the wine has been made or matured under Government supervision or in accordance with Government specifications or standards.</P>
          <P>(8) Any statement, design, device, or representation which relates to alcohol content or which tends to create the impression that a wine:</P>
          <P>(i) Contains distilled spirits; or</P>
          <P>(ii) Is comparable to a distilled spirit; or</P>
          <P>(iii) Has intoxicating qualities.</P>
          <FP>However, if a statement of composition is required to appear as the designation of a product not defined in these regulations, such statement of composition may include a reference to the type of distilled spirits contained therein. Further, an approved wine label, which bears the statement of alcohol content may be depicted in any advertising media, or an actual wine bottle showing the approved label bearing the statement of alcoholic content may be displayed in any advertising media.</FP>
          <P>(9) Any word in the brand name or class and type designation which is the name of a distilled spirits product or which simulates, imitates, or creates the impression that the wine so labeled is, or is similar to, any product customarily made with a distilled spirits base.</P>
          <P>(b) <E T="03">Statements inconsistent with labeling.</E> (1) Advertisements shall not contain any statement concerning a brand or lot of wine that is inconsistent with any statement on the labeling thereof.</P>
          <P>(2) Any label depicted on a bottle in an advertisement shall be a reproduction of an approved label.</P>
          <P>(c) <E T="03">Statement of age.</E> No statement of age or representation relative to age (including words or devices in any brand name or mark) shall be made, except (1) for vintage wine, in accordance with the provisions of § 4.27; (2) references in accordance with § 4.38(f); or (3) use of the word “old” as part of a brand name.</P>
          <P>(d) <E T="03">Statement of bottling dates.</E> The statement of any bottling date shall not be deemed to be a representation relative to age, if such statement appears without undue emphasis in the following form: “Bottled in __” (inserting the year in which the wine was bottled).</P>
          <P>(e) <E T="03">Statement of miscellaneous dates.</E> No date, except as provided in paragraphs (c) and (d) of this section, with respect to statement of vintage year and bottling date, shall be stated unless, in addition thereto, and in direct conjunction therewith, in the same size and kind of printing there shall be stated an explanation of the significance of such date: <E T="03">Provided,</E> That if any date refers to the date of establishment of any business, such date shall be stated without undue emphasis and in direct conjunction with the name of the person to whom it refers.</P>
          <P>(f) <E T="03">Flags, seals, coats of arms, crests, and other insignia.</E> No advertisement shall contain any statement, design, device, or pictorial representation of or relating to, or capable of being construed as relating to, the armed forces of the United States, or of the American flag, or of any emblem, seal, insignia, or decoration associated with such flag or armed forces; nor shall any advertisement contain any statement, device, design, or pictorial representation of or concerning any flag, seal, coat of arms, crest, or other insignia likely to mislead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of the government, organization, family, or individual with whom such flag, seal, coat of arms, crests, or insignia is associated.<PRTPAGE P="42"/>
          </P>
          <P>(g) <E T="03">Statements indicative of origin.</E> No statement, design, device, or representation which tends to create the impression that the wine originated in a particular place or region, shall appear in any advertisement unless the label of the advertised product bears an appellation of origin, and such appellation of origin appears in the advertisement in direct conjunction with the class and type designation.</P>
          <P>(h) <E T="03">Use of the word “importer” or similar words.</E> The word <E T="03">importer</E> or similar words shall not appear in advertisements of domestic wine except as part of the bona fide name of the permittee by or for whom, or of a retailer for whom, such wine is bottled, packed or distributed: <E T="03">Provided,</E> That in all cases where such words are used as part of such name, there shall be stated the words “Product of the United States” or similar words to negate any impression that the product is imported, and such negating statements shall appear in the same size and kind of printing as such name.</P>
          <P>(i) <E T="03">Health-related statements</E>—(1) <E T="03">Definitions.</E> When used in this paragraph (i), terms are defined as follows:</P>
          <P>(i) <E T="03">Health-related statement</E> means any statement related to health and includes statements of a curative or therapeutic nature that, expressly or by implication, suggest a relationship between the consumption of alcohol, wine, or any substance found within the wine, and health benefits or effects on health. The term includes both specific health claims and general references to alleged health benefits or effects on health associated with the consumption of alcohol, wine, or any substance found within the wine, as well as health-related directional statements. The term also includes statements and claims that imply that a physical or psychological sensation results from consuming the wine, as well as statements and claims of nutritional value (<E T="03">e.g.,</E> statements of vitamin content). Statements concerning caloric, carbohydrate, protein, and fat content do not constitute nutritional claims about the product.</P>
          <P>(ii) <E T="03">Specific health claim</E> is a type of health-related statement that, expressly or by implication, characterizes the relationship of the wine, alcohol, or any substance found within the wine, to a disease or health-related condition. Implied specific health claims include statements, symbols, vignettes, or other forms of communication that suggest, within the context in which they are presented, that a relationship exists between wine, alcohol, or any substance found within the wine, and a disease or health-related condition.</P>
          <P>(iii) <E T="03">Health-related directional statement</E> is a type of health-related statement that directs or refers consumers to a third party or other source for information regarding the effects on health of wine or alcohol consumption.</P>
          <P>(2) <E T="03">Rules for advertising</E>—(i) <E T="03">Health-related statements.</E> In general, advertisements may not contain any health-related statement that is untrue in any particular or tends to create a misleading impression as to the effects on health of alcohol consumption. TTB will evaluate such statements on a case-by-case basis and may require as part of the health-related statement a disclaimer or some other qualifying statement to dispel any misleading impression conveyed by the health-related statement. Such disclaimer or other qualifying statement must appear as prominent as the health-related statement.</P>
          <P>(ii) <E T="03">Specific health claims.</E> A specific health claim will not be considered misleading if it is truthful and adequately substantiated by scientific or medical evidence; sufficiently detailed and qualified with respect to the categories of individuals to whom the claim applies; adequately discloses the health risks associated with both moderate and heavier levels of alcohol consumption; and outlines the categories of individuals for whom any levels of alcohol consumption may cause health risks. This information must appear as part of the specific health claim and in a manner as prominent as the specific health claim.</P>
          <P>(iii) <E T="03">Health-related directional statements.</E> A statement that directs consumers to a third party or other source for information regarding the effects on health of wine or alcohol consumption is presumed misleading unless it—</P>

          <P>(A) Directs consumers in a neutral or other non-misleading manner to a <PRTPAGE P="43"/>third party or other source for balanced information regarding the effects on health of wine or alcohol consumption; and</P>
          <P>(B)(<E T="03">1</E>) Includes as part of the health-related directional statement, and in a manner as prominent as the health-related directional statement, the following disclaimer: “This statement should not encourage you to drink or increase your alcohol consumption for health reasons;” or</P>
          <P>(<E T="03">2</E>) Includes as part of the health-related directional statement, and in a manner as prominent as the health-related directional statement, some other qualifying statement that the appropriate TTB officer finds is sufficient to dispel any misleading impression conveyed by the health-related directional statement.</P>
          <P>(j) <E T="03">Confusion of brands.</E> Two or more different brands or lots of wine shall not be advertised in one advertisement (or in two or more advertisements in one issue of a periodical or newspaper, or in one piece of other written, printed, or graphic matter) if the advertisement tends to create the impression that representations made as to one brand or lot apply to the other or others, and if as to such latter the representations contravene any provision of §§ 4.60 through 4.64 or are in any respect untrue.</P>
          <P>(k) <E T="03">Deceptive advertising techniques.</E> Subliminal or similar techniques are prohibited. “Subliminal or similar techniques,” as used in this part, refers to any device or technique that is used to convey, or attempts to convey, a message to a person by means of images or sounds of a very brief nature that cannot be perceived at a normal level of awareness.</P>
          <CITA>[T.D. 6521, 25 FR 13843, Dec. 29, 1960, as amended by T.D. 6976, 33 FR 15025, Oct. 8, 1968; T.D. ATF-53, 43 FR 37678, Aug. 23, 1978; T.D. ATF-180, 49 FR 31672, Aug. 8, 1984; TTB T.D.-1, 68 FR 10103, Mar. 3, 2003]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.65</SECTNO>
          <SUBJECT>Comparative advertising.</SUBJECT>
          <P>(a) <E T="03">General.</E> Comparative adverstising shall not be disparaging of a competitor's product.</P>
          <P>(b) <E T="03">Taste tests.</E> (1) Taste test results may be used in advertisements comparing competitors' products unless they are disparaging, deceptive, or likely to mislead the consumer.</P>

          <P>(2) The taste test procedure used shall meet scientifically accepted procedures. An example of a scientifically accepted procedure is outlined in the <E T="03">Manual on Sensory Testing Methods,</E> ASTM Special Technical Publication 434, published by the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103, ASTM, 1968, Library of Congress Catalog Card Number 68-15545.</P>
          <P>(3) A statement shall appear in the advertisement providing the name and address of the testing administrator.</P>
          <CITA>[T.D. ATF-180, 49 FR 31673, Aug. 8, 1984]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart H—Standards of Fill for Wine</HD>
        <SECTION>
          <SECTNO>§ 4.70</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>(a) Except as provided in paragraph (b) of this section, no person engaged in business as a producer, rectifier, blender, importer, or wholesaler of wine, directly or indirectly or through an affiliate, shall sell or ship or deliver for sale or shipment, or otherwise introduce in interstate or foreign commerce, or receive therein, or remove from customs custody, any wine unless such wine is bottled or packed in the standard wine containers herein prescribed.</P>
          <P>(b) Sections 4.70 through 4.73 do not apply to:</P>
          <P>(1) Sake;</P>
          <P>(2) Wine packed in containers of 18 liters or more;</P>
          <P>(3) Imported wine in the original containers in which entered customs custody if the wine was bottled or packed before January 1, 1979; or</P>
          <P>(4) Wine domestically bottled or packed, either in or out of customs custody, before October 24, 1943, if the container, or the label on the container, bears a conspicuous statement of the net contents, and if the actual capacity of the container is not substantially less than the apparent capacity upon visual examination under ordinary conditions of purchase or use.</P>

          <P>(c) Section 4.73 does not apply to wine domestically bottled or packed, either in or out of customs custody, before January 1, 1979, if the wine was <PRTPAGE P="44"/>bottled or packed according to the standards of fill prescribed by § 4.72.</P>
          <CITA>[T.D. ATF-12, 39 FR 45222, Dec. 31, 1974, as amended by T.D. ATF-49, 43 FR 19848, May 9, 1978; T.D. ATF-76, 46 FR 1727, Jan. 7, 1981]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.71</SECTNO>
          <SUBJECT>Standard wine containers.</SUBJECT>
          <P>(a) A standard wine container shall be made, formed and filled to meet the following specifications:</P>
          <P>(1) <E T="03">Design.</E> It shall be so made and formed as not to mislead the purchaser. Wine containers shall be held (irrespective of the correctness of the net contents specified on the label) to be so made and formed as to mislead the purchaser if the actual capacity is substantially less than the apparent capacity upon visual examination under ordinary conditions of purchase or use; and</P>
          <P>(2) <E T="03">Fill.</E> It shall be so filled as to contain the quantity of wine specified in one of the standards of fill prescribed in § 4.72 or § 4.73; and</P>
          <P>(3) <E T="03">Headspace.</E> It shall be made and filled as to have a headspace not in excess of 6 percent of its total capacity after closure if the net content of the container is 187 milliliters or more, and a headspace not in excess of 10 percent of such capacity in the case of all other containers.</P>
          <CITA>[T.D. ATF-12, 39 FR 45222, Dec. 31, 1974]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.72</SECTNO>
          <SUBJECT>Metric standards of fill.</SUBJECT>
          <P>(a) <E T="03">Authorized standards of fill.</E> The standards of fill for wine are the following:</P>
          <GPOTABLE CDEF="xl50,r50" COLS="2" OPTS="L0">
            <ROW>
              <ENT I="01">3 liters.</ENT>
              <ENT>375 milliliters.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">1.5 liters.</ENT>
              <ENT>187 milliliters.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">1 liter.</ENT>
              <ENT>100 milliliters.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">750 milliliters.</ENT>
              <ENT>50 milliliters.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">500 milliliters.</ENT>
              <ENT/>
            </ROW>
          </GPOTABLE>
          <P>(b) <E T="03">Sizes larger than 3 liters.</E> Wine may be bottled or packed in containers of 4 liters or larger if the containers are filled and labeled in quantities of even liters (4 liters, 5 liters, 6 liters, etc.).</P>
          <P>(c) <E T="03">Tolerances.</E> The tolerances in fill are the same as are allowed by § 4.37 in respect to statement of net contents on labels.</P>
          <CITA>[T.D. ATF-12, 39 FR 45223, Dec. 31, 1974, as amended by T.D. ATF-49, 43 FR 19848, May 9, 1978; T.D. ATF-76, 46 FR 1727, Jan. 7, 1981; T.D. ATF-303, 55 FR 42713, Oct. 23, 1990. Redesignated by T.D. ATF-953, 68 FR 39455, July 2, 2003]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart I—General Provisions</HD>
        <SECTION>
          <SECTNO>§ 4.80</SECTNO>
          <SUBJECT>Exports.</SUBJECT>
          <P>The regulations in this part shall not apply to wine exported in bond.</P>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart J—American Grape Variety Names</HD>
        <SOURCE>
          <HD SOURCE="HED">Source:</HD>
          <P>T.D. ATF-370, 61 FR 539, Jan. 8, 1996, unless otherwise noted.</P>
        </SOURCE>
        <SECTION>
          <SECTNO>§ 4.91</SECTNO>
          <SUBJECT>List of approved prime names.</SUBJECT>

          <P>The following grape variety names have been approved by the Administrator for use as type designations for American wines. When more than one name may be used to identify a single variety of grape, the synonym is shown in parentheses following the prime grape names. Grape variety names may appear on labels of wine in upper or in lower case, and may be spelled with or without the hyphens or diacritic marks indicated in the following list.
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">
              <E T="03">Aglianico</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Agwam</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Albariño (Alvarinho)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Albemarle</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Aleatico</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Alicante Bouschet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Aligoté</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Alvarelhão</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Alvarinho (Albariño)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Arneis</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Aurore</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Bacchus</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Baco blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Baco noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Barbera</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Beacon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Beclan</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Bellandais</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Beta</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Black Corinth</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Black Pearl</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Blanc Du Bois</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Blue Eye</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Bonarda</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Bountiful</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Burdin 4672</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Burdin 5201</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Burdin 11042</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Burgaw</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Burger</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cabernet franc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cabernet Pfeffer</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cabernet Sauvignon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Calzin</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Campbell Early</E> (<E T="03">Island Belle</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Canada Muscat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Captivator</E>
              <PRTPAGE P="45"/>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Carignane</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Carlos</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Carmenère</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Carmine</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Carnelian</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cascade</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Castel 19-637</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Catawba</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cayuga White</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Centurion</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chambourcin</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chancellor</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Charbono</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chardonel</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chardonnay</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chasselas doré</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chelois</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chenin blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chief</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chowan</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cinsaut</E> (<E T="03">Black Malvoisie</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Clairette blanche</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Clinton</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Colombard</E> (<E T="03">French Colombard</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Colobel</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cortese</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Corvina</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Concord</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Conquistador</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Couderc noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Counoise</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cowart</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Creek</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cynthiana</E> (<E T="03">Norton</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Dearing</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">De Chaunac</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Delaware</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Diamond</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Dixie</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Dolcetto</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Doreen</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Dornfelder</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Dulcet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Durif</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Dutchess</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Early Burgundy</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Early Muscat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Edelweiss</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Eden</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ehrenfelser</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ellen Scott</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Elvira</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Emerald Riesling</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Feher Szagos</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Fernão Pires</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Fern Munson</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Fiano</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Flame Tokay</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Flora</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Florental</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Folle blanche</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Fredonia</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Freisa</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Fry</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Furmint</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Gamay noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Garronet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Gewürztraminer</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Gladwin 113</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Glennel</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Gold</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Golden Isles</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Golden Muscat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Grand Noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Green Hungarian</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Grenache</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Grignolino</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Grillo</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Gros Verdot</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Helena</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Herbemont</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Higgins</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Horizon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Hunt</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Iona</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Isabella</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ives</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">James</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Jewell</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Joannes Seyve 12-428</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Joannes Seyve 23-416</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Kerner</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Kay Gray</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Kleinberger</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">LaCrosse</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Lake Emerald</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Lambrusco</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Landal</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Landot noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Lenoir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Léon Millot</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Limberger (Lemberger)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Madeline Angevine</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Magnolia</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Magoon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Malbec</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Malvasia bianca</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Maréchal Foch</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Marsanne</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Melody</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Melon de Bourgogne (Melon)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Merlot</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Meunier (Pinot Meunier)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Mish</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Mission</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Missouri Riesling</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Mondeuse (Refosco)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Montefiore</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Moore Early</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Morio-Muskat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Mourvèdre (Mataro)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Müller-Thurgau</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Münch</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscadelle</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat blanc (Muscat Canelli)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat du Moulin</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat Hamburg (Black Muscat)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat of Alexandria</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat Ottonel</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Naples</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Nebbiolo</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Négrette</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">New York Muscat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Niagara</E>
              <PRTPAGE P="46"/>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Noah</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Noble</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Norton (Cynthiana)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ontario</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Orange Muscat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Palomino</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pamlico</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pedro Ximenes</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Petit Verdot</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Petite Sirah</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Peverella</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pinotage</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pinot blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pinot gris (Pinot Grigio)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pinot noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Precoce de Malingre</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pride</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Primitivo</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Rayon d'Or</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ravat 34</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ravat 51 (Vignoles)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ravat noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Redgate</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Regale</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Riesling (White Riesling)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Rkatziteli (Rkatsiteli)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Roanoke</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Rosette</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Roucaneuf</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Rougeon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Roussanne</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Royalty</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Rubired</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ruby Cabernet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">St. Croix</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">St. Laurent</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Saint Macaire</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Salem</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Salvador</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sangiovese</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sauvignon blanc (Fumé blanc)</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Scarlet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Scheurebe</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sémillon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sereksiya</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyval</E> (<E T="03">Seyval blanc</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Siegerrebe</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Siegfried</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Southland</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Souzão</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Steuben</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Stover</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sugargate</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sultanina</E> (<E T="03">Thomspon Seedless</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Summit</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Suwannee</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sylvaner</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Symphony</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Syrah</E> (<E T="03">Shiraz</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Swenson Red</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Tannat</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Tarheel</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Taylor</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Tempranillo</E> (<E T="03">Valdepeñas</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Teroldego</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Thomas</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Thompson Seedless</E> (<E T="03">Sultanina</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Tinta Madeira</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Tinto cão</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Tocai Friulano</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Topsail</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Touriga</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Traminer</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Traminette</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Trousseau</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Trousseau gris</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ugni blanc</E> (<E T="03">Trebbiano</E>)</FP>
            <FP SOURCE="FP-1">
              <E T="03">Valdiguié</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Valerien</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Van Buren</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Veeblanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Veltliner</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ventura</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Verdelet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Verdelho</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Vidal blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Villard blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Villard noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Vincent</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Viognier</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Vivant</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Welsch Rizling</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Watergate</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Welder</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Yuga</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Zinfandel</E>
            </FP>
          </EXTRACT>
          <CITA>[T.D. ATF-370, 61 FR 539, Jan. 8, 1996, as amended by T.D. ATF-417, 64 FR 49388, Sept. 13, 1999; T.D. ATF-433, 65 FR 78096, Dec. 14, 2000; T.D. ATF-466, 66 FR 49280, Sept. 27, 2001; T.D. ATF-475, 67 FR 11918, Mar. 18, 2002; T.D. ATF-481, 67 FR 56481, Sept. 4, 2002]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.92</SECTNO>
          <SUBJECT>Alternative names permitted for temporary use.</SUBJECT>
          <P>The following alternative names shown in the left column may be used as the type designation for American wine in lieu of the prime name of the grape variety shown in the right column. Alternative names listed in the left column may only be used for wine bottled prior to the date indicated.</P>
          <P>(a) <E T="03">Wines bottled prior to January 1, 1997.</E>
          </P>
          <EXTRACT>
            <HD SOURCE="HD2">Alternative Name/Prime Name</HD>
            <FP SOURCE="FP-1">
              <E T="03">Baco 1—Baco noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Baco 22A—Baco blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Bastardo—Trousseau</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Black Spanish—Lenoir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Burdin 7705—Florental</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Cayuga—Cayuga White</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chancellor noir—Chancellor</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chasselas—Chasselas doré</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chevrier—Sémillon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Chelois noir—Chelois</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Couderc 71-20—Couderc noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Couderc 299-35—Muscat du Moulin</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Foch—Maréchal Foch</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Franken Riesling—Sylvaner</E>
              <PRTPAGE P="47"/>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Gutedel—Chasselas doré</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ives Seedling—Ives</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Jacquez—Lenoir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Joannes Seyve 26-205—Chambourcin</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Landot 244—Landal</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Landot 4511—Landot noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Millot—Leon Millot</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Moore's Diamond—Diamond</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Norton Seedling—Norton</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pfeffer Cabernet—Cabernet Pfeffer</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pineau de la Loire—Chenin blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pinot Chardonnay—Chardonnay</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ravat 262—Ravat noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Ruländer—Pinot gris</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 128—Salvador</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 1000—Rosette</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 4986—Rayon d'Or</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 5279—Aurore</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 5898—Rougeon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 7053—Chancellor</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 8357—Colobel</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 9110—Verdelet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 9549—De Chaunac</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 10878—Chelois</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 13053—Cascade</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seibel 14596—Bellandais</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyve-Villard 5-276—Seyval</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyve-Villard 12-309—Roucaneuf</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyve-Villard 12-375—Villard blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyve-Villard 18-283—Garronet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyve-Villard 18-315—Villard noir</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Seyve-Villard 23-410—Valerien</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sweetwater—Chasselas doré</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Verdelet blanc—Verdelet</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Vidal 256—Vidal blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Virginia Seedling—Norton</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Wälschriesling—Welsch Rizling</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Welschriesling—Welsch Rizling</E>
            </FP>
          </EXTRACT>
          
          <P>(b) <E T="03">Wines bottled prior to January 1, 1999.</E>
          </P>
          <EXTRACT>
            <HD SOURCE="HD2">Alternative Name/Prime Name</HD>
            <FP SOURCE="FP-1">
              <E T="03">Cabernet—Cabernet Sauvignon</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Grey Riesling—Trousseau gris</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat Frontignan—Muscat blanc</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Muscat Pantelleria—Muscat of Alexandria</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Napa Gamay—Valdiquié</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Pinot Saint George—Négrette</E>
            </FP>
            <FP SOURCE="FP-1">
              <E T="03">Sauvignon vert—Muscadelle</E>
            </FP>
          </EXTRACT>
          
          <P>(c) <E T="03">Wines bottled prior to January 1, 2006.</E>
          </P>
          <EXTRACT>
            <HD SOURCE="HD2">Alternative Name/Prime Name</HD>
            <FP SOURCE="FP-1">
              <E T="03">Johannisberg Riesling—Riesling</E>
            </FP>
          </EXTRACT>
          <CITA>[T.D. ATF-370, 61 FR 539, Jan. 8, 1996, as amended by T.D. ATF-417, 64 FR 49388, Sept. 13, 1999]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 4.93</SECTNO>
          <SUBJECT>Approval of grape variety names.</SUBJECT>
          <P>(a) Any interested person may petition the Administrator for the approval of a grape variety name. The petition may be in the form of a letter and should provide evidence of the following—</P>
          <P>(1) Acceptance of the new grape variety,</P>
          <P>(2) The validity of the name for identifying the grape variety,</P>
          <P>(3) That the variety is used or will be used in winemaking, and</P>
          <P>(4) That the variety is grown and used in the United States.</P>
          <P>(b) For the approval of names of new grape varieties, documentation submitted with the petition to establish the items in paragraph (a) of this section may include—</P>
          <P>(1) reference to the publication of the name of the variety in a scientific or professional journal of horticulture or a published report by a professional, scientific or winegrowers' organization,</P>
          <P>(2) reference to a plant patent, if so patented, and</P>
          <P>(3) information pertaining to the commercial potential of the variety, such as the acreage planted and its location or market studies.</P>
          <P>(c) The Administrator will not approve a grape variety name if:</P>
          <P>(1) The name has previously been used for a different grape variety;</P>
          <P>(2) The name contains a term or name found to be misleading under § 4.39; or</P>
          <P>(3) The name of a new grape variety contains the term “Riesling.”</P>
          <P>(d) For new grape varieties developed in the United States, the Administrator may determine if the use of names which contain words of geographical significance, place names, or foreign words are misleading under § 4.39. The Administrator will not approve the use of a grape variety name found to be misleading.</P>

          <P>(e) The Administrator shall publish the list of approved grape variety names at least annually in the <E T="04">Federal Register</E>.</P>
          <APPRO>(Approved by the Office of Management and Budget under Control Number 1512-0513)</APPRO>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart K—Use of the Term “Organic”</HD>
        <SECTION>
          <SECTNO>§ 4.101</SECTNO>
          <SUBJECT>Use of the term “organic.”</SUBJECT>

          <P>(a) Use of the term “organic” is optional and is treated as “additional information on labels” under § 4.38(f).<PRTPAGE P="48"/>
          </P>
          <P>(b) Any use of the term “organic” on a wine label or in advertising of wine must comply with the United States Department of Agriculture's (USDA) National Organic Program rules (7 CFR part 205) as interpreted by the USDA.</P>
          <P>(c) This section applies to labels and advertising that use the term “organic” on and after October 21, 2002.</P>
          <CITA>[T.D. ATF-483, 67 FR 62858, Oct. 8, 2002]</CITA>
        </SECTION>
      </SUBPART>
    </PART>
    <PART>
      <EAR>Pt. 5</EAR>
      <HD SOURCE="HED">PART 5—LABELING AND ADVERTISING OF DISTILLED SPIRITS</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—Scope</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>5.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>5.2</SECTNO>
          <SUBJECT>Related regulations.</SUBJECT>
          <SECTNO>5.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <SECTNO>5.4</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>5.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Standards of Identity for Distilled Spirits</HD>
          <SECTNO>5.21</SECTNO>
          <SUBJECT>Application of standards.</SUBJECT>
          <SECTNO>5.22</SECTNO>
          <SUBJECT>The standards of identity.</SUBJECT>
          <SECTNO>5.23</SECTNO>
          <SUBJECT>Alteration of class and type.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart Ca—Formulas</HD>
          <SECTNO>5.25</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>5.26</SECTNO>
          <SUBJECT>Formula requirements.</SUBJECT>
          <SECTNO>5.27</SECTNO>
          <SUBJECT>Formulas.</SUBJECT>
          <SECTNO>5.28</SECTNO>
          <SUBJECT>Adoption of predecessor's formulas.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart D—Labeling Requirements for Distilled Spirits</HD>
          <SECTNO>5.31</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>5.32</SECTNO>
          <SUBJECT>Mandatory label information.</SUBJECT>
          <SECTNO>5.32a</SECTNO>
          <SUBJECT>Voluntary disclosure of major food allergens.</SUBJECT>
          <SECTNO>5.32b</SECTNO>
          <SUBJECT>Petitions for exemption from major food allergen labeling.</SUBJECT>
          <SECTNO>5.33</SECTNO>
          <SUBJECT>Additional requirements.</SUBJECT>
          <SECTNO>5.34</SECTNO>
          <SUBJECT>Brand names.</SUBJECT>
          <SECTNO>5.35</SECTNO>
          <SUBJECT>Class and type.</SUBJECT>
          <SECTNO>5.36</SECTNO>
          <SUBJECT>Name and address.</SUBJECT>
          <SECTNO>5.37</SECTNO>
          <SUBJECT>Alcohol content.</SUBJECT>
          <SECTNO>5.38</SECTNO>
          <SUBJECT>Net contents.</SUBJECT>
          <SECTNO>5.39</SECTNO>
          <SUBJECT>Presence of neutral spirits and coloring, flavoring, and blending materials.</SUBJECT>
          <SECTNO>5.40</SECTNO>
          <SUBJECT>Statements of age and percentage.</SUBJECT>
          <SECTNO>5.41</SECTNO>
          <SUBJECT>Bottle cartons, booklets and leaflets.</SUBJECT>
          <SECTNO>5.42</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart E—Standards of Fill for Bottled Distilled Spirits</HD>
          <SECTNO>5.45</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>5.46</SECTNO>
          <SUBJECT>Standard liquor bottles.</SUBJECT>
          <SECTNO>5.47</SECTNO>
          <SUBJECT>Standards of fill (distilled spirits bottled before January 1, 1980).</SUBJECT>
          <SECTNO>5.47a</SECTNO>
          <SUBJECT>Metric standards of fill (distilled spirits bottled after December 31, 1979).</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart F—Requirements for Withdrawal From Customs Custody of Bottled Imported Distilled Spirits</HD>
          <SECTNO>5.51</SECTNO>
          <SUBJECT>Label approval and release.</SUBJECT>
          <SECTNO>5.52</SECTNO>
          <SUBJECT>Certificates of age and origin.</SUBJECT>
          <SECTNO>5.53</SECTNO>
          <SUBJECT>Certificate of nonstandard fill.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart G—Requirements for Approval of Labels of Domestically Bottled Distilled Spirits</HD>
          <SECTNO>5.55</SECTNO>
          <SUBJECT>Certificates of label approval.</SUBJECT>
          <SECTNO>5.56</SECTNO>
          <SUBJECT>Certificates of age and origin.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart H—Advertising of Distilled Spirits</HD>
          <SECTNO>5.61</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>5.62</SECTNO>
          <SUBJECT>Definition.</SUBJECT>
          <SECTNO>5.63</SECTNO>
          <SUBJECT>Mandatory statements.</SUBJECT>
          <SECTNO>5.64</SECTNO>
          <SUBJECT>Legibility of mandatory information.</SUBJECT>
          <SECTNO>5.65</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <SECTNO>5.66</SECTNO>
          <SUBJECT>Comparative advertising.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart I—Use of the Term “Organic.”</HD>
          <SECTNO>5.71</SECTNO>
          <SUBJECT>Use of the term “organic.”</SUBJECT>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>26 U.S.C. 5301, 7805, 27 U.S.C. 205.</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. 7020, 34 FR 20337, Dec. 30, 1969, unless otherwise noted.</P>
      </SOURCE>
      <EDNOTE>
        <HD SOURCE="HED">Editorial Note:</HD>
        <P>Nomenclature changes to part 5 appear by T.D. ATF-425, 65 FR 11891, Mar. 7, 2000.</P>
      </EDNOTE>
      <SUBPART>
        <HD SOURCE="HED">Subpart A—Scope</HD>
        <SECTION>
          <SECTNO>§ 5.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>The regulations in this part relate to the labeling and advertising of distilled spirits. This part applies to the several States of the United States, the District of Columbia, and the Commonwealth of Puerto Rico, but does not apply to distilled spirits for export.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.2</SECTNO>
          <SUBJECT>Related regulations.</SUBJECT>
          <P>The following regulations also relate to this part:
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">7 CFR Part 205—National Organic Program</FP>
            <FP SOURCE="FP-1">27 CFR Part 1—Basic Permit Requirements Under the Federal Alcohol Administration Act, Nonindustrial Use of Distilled Spirits and Wine, Bulk Sales and Bottling of Distilled Spirits</FP>
            <FP SOURCE="FP-1">27 CFR Part 4—Labeling and Advertising of Wine<PRTPAGE P="49"/>
            </FP>
            <FP SOURCE="FP-1">27 CFR Part 7—Labeling and Advertising of Malt Beverages</FP>
            <FP SOURCE="FP-1">27 CFR Part 13—Labeling Proceedings</FP>
            <FP SOURCE="FP-1">27 CFR Part 16—Alcoholic Beverage Health Warning Statement</FP>
            <FP SOURCE="FP-1">27 CFR Part 19—Distilled Spirits Plants</FP>
            <FP SOURCE="FP-1">27 CFR Part 26—Liquors and Articles From Puerto Rico and the Virgin Islands</FP>
            <FP SOURCE="FP-1">27 CFR Part 27—Importation of Distilled Spirits, Wines, and Beer</FP>
            <FP SOURCE="FP-1">27 CFR Part 28—Exportation of Alcohol</FP>
            <FP SOURCE="FP-1">27 CFR Part 71—Rules of Practice in Permit Proceedings</FP>
          </EXTRACT>
          <CITA>[T.D. ATF-483, 67 FR 62858, Oct. 8, 2002, as amended by T.D. TTB-8, 69 FR 3829, Jan. 27, 2004]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <P>(a) The appropriate TTB officer is authorized to prescribe all forms required by this part. All of the information called for in each form shall be furnished as indicated by the headings on the form and the instructions on or pertaining to the form. In addition, information called for in each form shall be furnished as required by this part. The form will be filed in accordance with the instructions for the form.</P>

          <P>(b) Forms prescribed by this part are available for printing through the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. ATF-92, 46 FR 46912, Sept. 23, 1981, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987; T.D. 372, 61 FR 20723, May 8, 1996; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000; T.D. TTB-44, 71 FR 16921, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.4</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>

          <P>Most of the regulatory authorities of the Administrator contained in this part are delegated to appropriate TTB officers. These TTB officers are specified in TTB Order 1135.5, Delegation of the Administrator's Authorities in 27 CFR Part 5, Labeling and Advertising of Distilled Spirits. You may obtain a copy of this order by accessing the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. TTB-44, 71 FR 16921, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 5.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>When used in this part and in forms prescribed under this part, where not otherwise distinctly expressed or manifestly incompatible with the intent thereof, terms shall have the meaning ascribed in this section. Any other term defined in the Federal Alcohol Administration Act and used in this part shall have the same meaning assigned to it by such Act.</P>
          <P>
            <E T="03">Act.</E> The Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">Advertisement.</E> See § 5.62 for meaning of term as used in subpart H of this part.</P>
          <P>
            <E T="03">Age.</E> The period during which, after distillation and before bottling, distilled spirits have been stored in oak containers. “Age” for bourbon whisky, rye whisky, wheat whisky, malt whisky, or rye malt whisky, and straight whiskies other than straight corn whisky, means the period the whisky has been stored in charred new oak containers.</P>
          <P>
            <E T="03">Appropriate TTB officer.</E> An officer or employee of the Alcohol and Tobacco Tax and Trade Bureau (TTB) authorized to perform any functions relating to the administration or enforcement of this part by TTB Order 1135.5, Delegation of the Administrator's Authorities in 27 CFR Part 5, Labeling and Advertising of Distilled Spirits.</P>
          <P>
            <E T="03">Bottle.</E> Any container, irrespective of the material from which made, used for the sale of distilled spirits at retail.</P>
          <P>
            <E T="03">Brand label.</E> The principal display panel that is most likely to be displayed, presented, shown, or examined under normal and customary conditions of display for retail sale, and any other label appearing on the same side of the bottle as the principal display panel. The principal display panel appearing on a cylindrical surface is that 40 percent of the circumference which is most likely to be displayed, presented, shown, or examined under normal and customary conditions of display for retail sale.<PRTPAGE P="50"/>
          </P>
          <P>
            <E T="03">Distilled spirits.</E> Ethyl alcohol, hydrated oxide of ethyl, spirits of wine, whisky, rum, brandy, gin, and other distilled spirits, including all dilutions and mixtures thereof, for nonindustrial use. The term “distilled spirits” shall not include mixtures containing wine, bottled at 48 degrees of proof or less, if the mixture contains more than 50 percent wine on a proof gallon basis.</P>
          <P>
            <E T="03">Gallon.</E> U.S. gallon of 231 cubic inches of alcoholic beverage at 60 °F.</P>
          <P>
            <E T="03">In bulk.</E> In containers having a capacity in excess of 1 wine gallon (3.785 liters).</P>
          <P>
            <E T="03">Interstate or foreign commerce.</E> Commerce between any State and any place outside thereof, or commerce within any Territory or the District of Columbia, or between points within the same State but through any place outside thereof.</P>
          <P>
            <E T="03">Liter or litre.</E> A metric unit of capacity equal to 1,000 cubic centimeters of distilled spirits at l5.56 °C (60 °F.), and equivalent to 33.814 U.S. fluid ounces. A liter is subdivided into 1,000 milliliters. milliliter or milliliters may be abbreviated as “ml”.</P>
          <P>
            <E T="03">Permittee.</E> Any person holding a basic permit under the Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Person.</E> Any individual, partnership, joint stock company, business trust, association, corporation, or other form of business enterprise, including a receiver, trustee, or liquidating agent and including an officer or employee of any agency of a State or political subdivision thereof; and the term “trade buyer” means any person who is a wholesaler or retailer.</P>
          <P>
            <E T="03">Produced at.</E> As used in §§ 5.22 and 5.52 in conjunction with specific degrees of proof to describe the standards of identity, means the composite proof of the spirits after completion of distillation and before reduction in proof.</P>
          <P>
            <E T="03">Proof gallon.</E> A gallon of liquid at 60 °F. which contains 50 percent by volume of ethyl alcohol having a specific gravity of 0.7939 at 60 °F. referred to water at 60 °F. as unity, or the alcoholic equivalent thereof.</P>
          <P>
            <E T="03">Season.</E> The period from January 1 through June 30, is the spring season and the period from July 1 through December 31 is the fall season.</P>
          <P>
            <E T="03">United States.</E> The several States and Territories and the District of Columbia; the term “State” includes a Territory and the District of Columbia; and the term “Territory” means the Commonwealth of Puerto Rico.</P>
          <SECAUTH>(26 U.S.C. 7805 (68 Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          <CITA>[T.D. ATF-48, 43 FR 13533, Mar. 31, 1978; 44 FR 55839, Sept. 28, 1979, as amended by T.D. ATF-62, 44 FR 71620, Dec. 11, 1979; T.D. ATF-66, 45 FR 40547, June 13, 1980; T.D. ATF-94, 46 FR 55096, Nov. 6, 1981; T.D. ATF-198, 50 FR 8463, Mar. 1, 1985; T.D. ATF-230, 51 FR 21748, June 16, 1986; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000; T.D. TTB-44, 71 FR 16921, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Standards of Identity for Distilled Spirits</HD>
        <SECTION>
          <SECTNO>§ 5.21</SECTNO>
          <SUBJECT>Application of standards.</SUBJECT>
          <P>The standards of identity for the several classes and types of distilled spirits set forth in this part shall be applicable only to distilled spirits for beverage or other nonindustrial purposes.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.22</SECTNO>
          <SUBJECT>The standards of identity.</SUBJECT>
          <P>Standards of identity for the several classes and types of distilled spirits set forth in this section shall be as follows (see also § 5.35, class and type):</P>
          <P>(a) <E T="03">Class 1; neutral spirits or alcohol.</E> “Neutral spirits” or “alcohol” are distilled spirits produced from any material at or above 190° proof, and, if bottled, bottled at not less than 80° proof.</P>
          <P>(1) “Vodka” is neutral spirits so distilled, or so treated after distillation with charcoal or other materials, as to be without distinctive character, aroma, taste, or color.</P>
          <P>(2) “Grain spirits” are neutral spirits distilled from a fermented mash of grain and stored in oak containers.</P>
          <P>(b) <E T="03">Class 2; whisky.</E> “Whisky” is an alcoholic distillate from a fermented mash of grain produced at less than 190° proof in such manner that the distillate possesses the taste, aroma, and characteristics generally attributed to whisky, stored in oak containers (except that corn whisky need not be so stored), and bottled at not less than 80° proof, and also includes mixtures of such distillates for which no specific standards of identity are prescribed.</P>

          <P>(1)(i) “Bourbon whisky”, “rye whisky”, “wheat whisky”, “malt whisky”, <PRTPAGE P="51"/>or “rye malt whisky” is whisky produced at not exceeding 160° proof from a fermented mash of not less than 51 percent corn, rye, wheat, malted barley, or malted rye grain, respectively, and stored at not more than 125° proof in charred new oak containers; and also includes mixtures of such whiskies of the same type.</P>
          <P>(ii) “Corn whisky” is whisky produced at not exceeding 160° proof from a fermented mash of not less than 80 percent corn grain, and if stored in oak containers stored at not more than 125° proof in used or uncharred new oak containers and not subjected in any manner to treatment with charred wood; and also includes mixtures of such whisky.</P>
          <P>(iii) Whiskies conforming to the standards prescribed in paragraphs (b)(1)(i) and (ii) of this section, which have been stored in the type of oak containers prescribed, for a period of 2 years or more shall be further designated as “straight”; for example, “straight bourbon whisky”, “straight corn whisky”, and whisky conforming to the standards prescribed in paragraph (b)(1)(i) of this section, except that it was produced from a fermented mash of less than 51 percent of any one type of grain, and stored for a period of 2 years or more in charred new oak containers shall be designated merely as “straight whisky”. No other whiskies may be designated “straight”. “Straight whisky” includes mixtures of straight whiskies of the same type produced in the same State.</P>
          <P>(2) “Whisky distilled from bourbon (rye, wheat, malt, or rye malt) mash” is whisky produced in the United States at not exceeding 160° proof from a fermented mash of not less than 51 percent corn, rye, wheat, malted barley, or malted rye grain, respectively, and stored in used oak containers; and also includes mixtures of such whiskies of the same type. Whisky conforming to the standard of identity for corn whisky must be designated corn whisky.</P>
          <P>(3) “Light whisky” is whisky produced in the United States at more than 160° proof, on or after January 26, 1968, and stored in used or uncharred new oak containers; and also includes mixtures of such whiskies. If “light whisky” is mixed with less than 20 percent of straight whisky on a proof gallon basis, the mixture shall be designated “blended light whisky” (light whisky—a blend).</P>
          <P>(4) “Blended whisky” (whisky—a blend) is a mixture which contains straight whisky or a blend of straight whiskies at not less than 20 percent on a proof gallon basis, excluding alcohol derived from added harmless coloring, flavoring or blending materials, and, separately, or in combination, whisky or neutral spirits. A blended whisky containing not less than 51 percent on a proof gallon basis of one of the types of straight whisky shall be further designated by that specific type of straight whisky; for example, “blended rye whisky” (rye whisky—a blend).</P>
          <P>(5)(i) “A blend of straight whiskies” (blended straight whiskies) is a mixture of straight whiskies which does not conform to the standard of identify for “straight whisky.” Products so designated may contain harmless coloring, flavoring, or blending materials as set forth in 27 CFR 5.23(a).</P>
          <P>(ii) “A blend of straight whiskies” (blended straight whiskies) consisting entirely of one of the types of straight whisky, and not conforming to the standard for straight whisky, shall be further designated by that specific type of straight whisky; for example, “a blend of straight rye whiskies” (blended straight rye whiskies). “A blend of straight whiskies” consisting entirely of one of the types of straight whisky shall include straight whisky of the same type which was produced in the same State or by the same proprietor within the same State, provided that such whisky contains harmless coloring, flavoring, or blending materials as stated in 27 CFR 5.23(a).</P>

          <P>(iii) The harmless coloring, flavoring, or blending materials allowed under this section shall not include neutral spirits or alcohol in their original state. Neutral spirits or alcohol may only appear in a “blend of straight whiskies” or in a “blend of straight whiskies consisting entirely of one of the types of straight whisky” as a vehicle for recognized flavoring of blending material.<PRTPAGE P="52"/>
          </P>
          <P>(6) “Spirit whisky” is a mixture of neutral spirits and not less than 5 percent on a proof gallon basis of whisky, or straight whisky, or straight whisky and whisky, if the straight whisky component is less than 20 percent on a proof gallon basis.</P>

          <P>(7) “Scotch whisky” is whisky which is a distinctive product of Scotland, manufactured in Scotland in compliance with the laws of the United Kingdom regulating the manufacture of Scotch whisky for consumption in the United Kingdom: <E T="03">Provided,</E> That if such product is a mixture of whiskies, such mixture is “blended Scotch whisky” (Scotch whisky—a blend).</P>

          <P>(8) “Irish whisky” is whisky which is a distinctive product of Ireland, manufactured either in the Republic of Ireland or in Northern Ireland, in compliance with their laws regulating the manufacture of Irish whisky for home consumption: <E T="03">Provided,</E> That if such product is a mixture of whiskies, such mixture is “blended Irish whisky” (Irish whisky—a blend).</P>

          <P>(9) “Canadian whisky” is whisky which is a distinctive product of Canada, manufactured in Canada in compliance with the laws of Canada regulating the manufacture of Canadian whisky for consumption in Canada: <E T="03">Provided,</E> That if such product is a mixture of whiskies, such mixture is “blended Canadian whisky” (Canadian whisky—a blend).</P>
          <P>(c) <E T="03">Class 3; gin.</E> “Gin” is a product obtained by original distillation from mash, or by redistillation of distilled spirits, or by mixing neutral spirits, with or over juniper berries and other aromatics, or with or over extracts derived from infusions, percolations, or maceration of such materials, and includes mixtures of gin and neutral spirits. It shall derive its main characteristic flavor from juniper berries and be bottled at not less than 80° proof. Gin produced exclusively by original distillation or by redistillation may be further designated as “distilled”. “Dry gin” (London dry gin), “Geneva gin” (Hollands gin), and “Old Tom gin” (Tom gin) are types of gin known under such designations.</P>
          <P>(d) <E T="03">Class 4; brandy.</E> “Brandy” is an alcoholic distillate from the fermented juice, mash, or wine of fruit, or from the residue thereof, produced at less than 190° proof in such manner that the distillate possesses the taste, aroma, and characteristics generally attributed to the product, and bottled at not less than 80° proof. Brandy, or mixtures thereof, not conforming to any of the standards in paragraphs (d) (1) through (8) of this section shall be designated as “brandy”, and such designation shall be immediately followed by a truthful and adequate statement of composition.</P>
          <P>(1) “Fruit brandy” is brandy distilled solely from the fermented juice or mash of whole, sound, ripe fruit, or from standard grape, citrus, or other fruit wine, with or without the addition of not more than 20 percent by weight of the pomace of such juice or wine, or 30 percent by volume of the lees of such wine, or both (calculated prior to the addition of water to facilitate fermentation or distillation). Fruit brandy shall include mixtures of such brandy with not more than 30 percent (calculated on a proof gallon basis) of lees brandy. Fruit brandy, derived from grapes, shall be designated as “grape brandy” or “brandy”, except that in the case of brandy (other than neutral brandy, pomace brandy, marc brandy or grappa brandy) distilled from the fermented juice, mash, or wine of grapes, or the residue thereof, which has been stored in oak containers for less than 2 years, the statement of class and type shall be immediately preceded, in the same size and kind of type, by the word “immature”. Fruit brandy, other than grape brandy, derived from one variety of fruit, shall be designated by the word “brandy” qualified by the name of such fruit (for example, “peach brandy”), except that “apple brandy” may be designated “applejack”. Fruit brandy derived from more than one variety of fruit shall be designated as “fruit brandy” qualified by a truthful and adequate statement of composition.</P>
          <P>(2) “Cognac”, or “Cognac (grape) brandy”, is grape brandy distilled in the Cognac region of France, which is entitled to be so designated by the laws and regulations of the French Government.</P>

          <P>(3) “Dried fruit brandy” is brandy that conforms to the standard for fruit <PRTPAGE P="53"/>brandy except that it has been derived from sound, dried fruit, or from the standard wine of such fruit. Brandy derived from raisins, or from raisin wine, shall be designated as “raisin brandy”. Other brandies shall be designated in the same manner as fruit brandy from the corresponding variety or varieties of fruit except that the name of the fruit shall be qualified by the word “dried”.</P>
          <P>(4) “Lees brandy” is brandy distilled from the lees of standard grape, citrus, or other fruit wine, and shall be designated as “lees brandy”, qualified by the name of the fruit from which such lees are derived.</P>
          <P>(5) “Pomace brandy”, or “marc brandy”, is brandy distilled from the skin and pulp of sound, ripe grapes, citrus or other fruit, after the withdrawal of the juice or wine therefrom, and shall be designated as “pomace brandy”, or “marc brandy”, qualified by the name of the fruit from which derived. Grape pomace brandy may be designated as “grappa” or “grappa brandy”.</P>
          <P>(6) “Residue brandy” is brandy distilled wholly or in part from the fermented residue of fruit or wine, and shall be designated as “residue brandy” qualified by the name of the fruit from which derived. Brandy distilled wholly or in part from residue materials which conforms to any of the standards set forth in paragraphs (d) (1), (3), (4), and (5) of this section may, regardless of such fact, be designated “residue brandy”, but the use of such designation shall be conclusive, precluding any later change of designation.</P>
          <P>(7) “Neutral brandy” is brandy produced at more than 170° proof and shall be designated in accordance with the standards in this paragraph, except that the designation shall be qualified by the word “neutral”; for example, “neutral citrus residue brandy”.</P>
          <P>(8) “Substandard brandy” shall bear as a part of its designation the word “substandard”, and shall include:</P>
          <P>(i) Any brandy distilled from fermented juice, mash, or wine having a volatile acidity, calculated as acetic acid and exclusive of sulfur dioxide, in excess of 0.20 gram per 100 cubic centimeters (20 °C.); measurements of volatile acidity shall be calculated exclusive of water added to facilitate distillation.</P>
          <P>(ii) Any brandy which has been distilled from unsound, moldy, diseased, or decomposed juice, mash, wine, lees, pomace, or residue, or which shows in the finished product any taste, aroma, or characteristic associated with products distilled from such material.</P>
          <P>(e) <E T="03">Class 5; blended applejack.</E> “Blended applejack” (applejack—a blend) is a mixture which contains at least 20 percent of apple brandy (applejack) on a proof gallon basis, stored in oak containers for not less than 2 years, and not more than 80 percent of neutral spirits on a proof gallon basis if such mixture at the time of bottling is not less than 80° proof.</P>
          <P>(f) <E T="03">Class 6; rum.</E> “Rum” is an alcoholic distillate from the fermented juice of sugar cane, sugar cane syrup, sugar cane molasses, or other sugar cane by-products, produced at less than 190° proof in such manner that the distillate possesses the taste, aroma and characteristics generally attributed to rum, and bottled at not less than 80° proof; and also includes mixtures solely of such distillates.</P>
          <P>(g) <E T="03">Class 7; Tequila.</E> “Tequila” is an alcoholic distillate from a fermented mash derived principally from the Agave Tequilana Weber (“blue” variety), with or without additional fermentable substances, distilled in such a manner that the distillate possesses the taste, aroma, and characteristics generally attributed to Tequila and bottled at not less than 80° proof, and also includes mixtures solely of such distillates. Tequila is a distinctive product of Mexico, manufactured in Mexico in compliance with the laws of Mexico regulating the manufacture of Tequila for consumption in that country.</P>
          <P>(h) <E T="03">Class 8; cordials and liqueurs.</E> Cordials and liqueurs are products obtained by mixing or redistilling distilled spirits with or over fruits, flowers, plants, or pure juices therefrom, or other natural flavoring materials, or with extracts derived from infusions, percolation, or maceration of such materials, and containing sugar, dextrose, or levulose, or a combination thereof, in an amount not less than 2<FR>1/2</FR> percent by weight of the finished product.<PRTPAGE P="54"/>
          </P>
          <P>(1) “Sloe gin” is a cordial or liqueur with the main characteristic flavor derived from sloe berries.</P>
          <P>(2) “Rye liqueur”, “bourbon liqueur” (rye, bourbon cordial) are liqueurs, bottled at not less than 60° proof, in which not less than 51 percent, on a proof gallon basis, of the distilled spirits used are, respectively, rye or bourbon whisky, straight rye or straight bourbon whisky, or whisky distilled from a rye or bourbon mash, and which possess a predominant characteristic rye or bourbon flavor derived from such whisky. Wine, if used, must be within the 2<FR>1/2</FR> percent limitation provided in § 5.23 for coloring, flavoring, and blending materials.</P>
          <P>(3) “Rock and rye”, “rock and bourbon”, “rock and brandy”, “rock and rum” are liqueurs, bottled at not less than 48° proof, in which, in the case of rock and rye and rock and bourbon, not less than 51 percent, on a proof gallon basis, of the distilled spirits used are, respectively, rye or bourbon whisky, straight rye or straight bourbon whisky, or whisky distilled from a rye or bourbon mash, and, in the case of rock and brandy and rock and rum, the distilled spirits used are all grape brandy or rum, respectively; containing rock candy or sugar syrup, with or without the addition of fruit, fruit juices, or other natural flavoring materials, and possessing, respectively, a predominant characteristic rye, bourbon, brandy, or rum flavor derived from the distilled spirits used. Wine, if used, must be within the 2<FR>1/2</FR> percent limitation provided in § 5.23 for harmless coloring, flavoring, and blending materials.</P>
          <P>(4) “Rum liqueur,” “gin liqueur,” “brandy liqueur,” are liqueurs, bottled at not less than 60 proof, in which the distilled spirits used are entirely rum, gin, or brandy, respectively, and which possess, respectively, a predominant characteristic rum, gin, or brandy flavor derived from the distilled spirits used. In the case of brandy liqueur, the type of brandy must be stated in accordance with § 5.22(d), except that liqueurs made entirely with grape brandy may be designated simply as “brandy liqueur.” Wine, if used, must be within the 2<FR>1/2</FR> percent limitation provided for in § 5.23 for harmless coloring, flavoring, and blending materials.</P>
          <P>(5) The designation of a cordial or liqueur may include the word “dry” if the sugar, dextrose, or levulose, or a combination thereof, are less than 10 percent by weight of the finished product.</P>
          <P>(6) Cordials and liqueurs shall not be designated as “distilled” or “compound”.</P>
          <P>(i) <E T="03">Class 9; flavored brandy, flavored gin, flavored rum, flavored vodka, and flavored whisky.</E> “Flavored brandy, “flavored gin,” “flavored rum,” “flavored vodka,” and “flavored whisky,” are brandy, gin, rum vodka, and whisky, respectively, to which have been added natural flavoring materials, with or without the addition of sugar, and bottled at not less than 60° proof. The name of the predominant flavor shall appear as a part of the designation. If the finished product contains more than 2<FR>1/2</FR> percent by volume of wine, the kinds and precentages by volume of wine must be stated as a part of the designation, except that a flavored brandy may contain an additional 12<FR>1/2</FR> percent by volume of wine, without label disclosure, if the additional wine is derived from the particular fruit corresponding to the labeled flavor of the product.</P>
          <P>(j) <E T="03">Class 10; imitations.</E> Imitations shall bear, as a part of the designation thereof, the word “imitation” and shall include the following:</P>
          <P>(1) Any class or type of distilled spirits to which has been added coloring or flavoring material of such nature as to cause the resultant product to simulate any other class or type of distilled spirits;</P>
          <P>(2) Any class or type of distilled spirits (other than distilled spirits required under § 5.35 to bear a distinctive or fanciful name and a truthful and adequate statement of composition) to which has been added flavors considered to be artificial or imitation. In determining whether a flavor is artificial or imitation, recognition will be given to what is considered to be “good commercial practice” in the flavor manufacturing industry;</P>

          <P>(3) Any class of type of distilled spirits (except cordials, liqueurs and specialties marketed under labels which do not indicate or imply, that a particular class or type of distilled spirits <PRTPAGE P="55"/>was used in the manufacture thereof) to which has been added any whisky essense, brandy essence, rum essence, or similar essence or extract which simulates or enhances, or is used by the trade or in the particular product to simulate or enhance, the characteristics of any class or type of distilled spirits;</P>
          <P>(4) Any type of whisky to which beading oil has been added;</P>
          <P>(5) Any rum to which neutral spirits or distilled spirits other than rum have been added;</P>
          <P>(6) Any brandy made from distilling material to which has been added any amount of sugar other than the kind and amount of sugar expressly authorized in the production of standard wine; and</P>
          <P>(7) Any brandy to which neutral spirits or distilled spirits other than brandy have been added, except that this provision shall not apply to any product conforming to the standard of identity for blended applejack.</P>
          <P>(k) <E T="03">Class 11; geographical designations.</E> (1) Geographical names for distinctive types of distilled spirits (other than names found by the appropriate TTB officer under paragraph (k)(2) of this section to have become generic) shall not be applied to distilled spirits produced in any other place than the particular region indicated by the name, unless (i) in direct conjunction with the name there appears the word “type” or the word “American” or some other adjective indicating the true place of production, in lettering substantially as conspicuous as such name, and (ii) the distilled spirits to which the name is applied conform to the distilled spirits of that particular region. The following are examples of distinctive types of distilled spirits with geographical names that have not become generic: Eau de Vie de Dantzig (Danziger Goldwasser), Ojen, Swedish punch. Geographical names for distinctive types of distilled spirits shall be used to designate only distilled spirits conforming to the standard of identity, if any, for such type specified in this section, or if no such standard is so specified, then in accordance with the trade understanding of that distinctive type.</P>
          <P>(2) Only such geographical names for distilled spirits as the appropriate TTB officer finds have by usage and common knowledge lost their geographical significance to such extent that they have become generic shall be deemed to have become generic. Examples at London dry gin, Geneva (Hollands) gin.</P>
          <P>(3) Geographical names that are not names for distinctive types of distilled spirits, and that have not become generic, shall not be applied to distilled spirits produced in any other place than the particular place or region indicated in the name. Examples are Cognac, Armagnac, Greek brandy, Pisco brandy, Jamaica rum, Puerto Rico rum, Demerara rum.</P>
          <P>(4) The words “Scotch”, “Scots” “Highland”, or “Highlands” and similar words connoting, indicating, or commonly associated with Scotland, shall not be used to designate any product not wholly produced in Scotland.</P>
          <P>(l) <E T="03">Class 12; products without geographical designations but distinctive of a particular place.</E> (1) The whiskies of the types specified in paragraphs (b) (1), (4), (5), and (6) of this section are distinctive products of the United States and if produced in a foreign country shall be designated by the applicable designation prescribed in such paragraphs, together with the words “American type” or the words “produced (distilled, blended) in __”, the blank to be filled in with the name of the foreign country: <E T="03">Provided,</E> That the word “bourbon” shall not be used to describe any whisky or whisky-based distilled spirits not produced in the United States. If whisky of any of these types is composed in part of whisky or whiskies produced in a foreign country there shall be stated, on the brand label, the percentage of such whisky and the country of origin thereof.</P>

          <P>(2) The name for other distilled spirits which are distinctive products of a particular place or country, an example is Habanero, shall not be given to the product of any other place or country unless the designation for such product includes the word “type” or an adjective such as “American”, or the like, clearly indicating the true place of production. The provision for place <PRTPAGE P="56"/>of production shall not apply to designations which by usage and common knowledge have lost their geographical significance to such an extent that the appropriate TTB officer finds they have become generic. Examples are Slivovitz, Zubrovka, Aquavit, Arrack, and Kirschwasser.</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-7, 38 FR 33471, Dec. 5, 1973; T.D. ATF-36, 41 FR 47426, Oct. 29, 1976; T.D. ATF-37, 41 FR 48121, Nov. 2, 1976; T.D. ATF-48, 44 FR 55839, Sept. 28, 1979; T.D. ATF-62, 44 FR 71620, Dec. 11, 1979; T.D. ATF-66, 45 FR 40547, June 13, 1980; T.D. ATF-94, 46 FR 55096, Nov. 6, 1981; T.D. ATF-259, 52 FR 41422, Oct. 28, 1987; T.D. ATF-324, 57 FR 29020, June 30, 1992]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.23</SECTNO>
          <SUBJECT>Alteration of class and type.</SUBJECT>
          <P>(a) <E T="03">Additions.</E> (1) The addition of any coloring, flavoring, or blending materials to any class and type of distilled spirits, except as otherwise provided in this section, alters the class and type thereof and the product shall be appropriately redesignated.</P>
          <P>(2) There may be added to any class or type of distilled spirits, without changing the class or type thereof, (i) such harmless coloring, flavoring, or blending materials as are an essential component part of the particular class or type of distilled spirits to which added, and (ii) harmless coloring, flavoring, or blending materials such as caramel, straight malt or straight rye malt whiskies, fruit juices, sugar, infusion of oak chips when approved by the Administrator, or wine, which are not an essential component part of the particular distilled spirits to which added, but which are customarily employed therein in accordance with established trade usage, if such coloring, flavoring, or blending materials do not total more than 2<FR>1/2</FR> percent by volume of the finished product.</P>
          <P>(3) “Harmless coloring, flavoring, and blending materials” shall not include (i) any material which would render the product to which it is added an imitation, or (ii) any material, other than caramel, infusion of oak chips, and sugar, in the case of Cognac brandy; or (iii) any material whatsoever in the case of neutral spirits or straight whiskey, except that vodka may be treated with sugar in an amount not to exceed 2 grams per liter and a trace amount of citric acid.</P>
          <P>(b) <E T="03">Extractions.</E> The removal from any distilled spirits of any constituents to such an extent that the product does not possess the taste, aroma, and characteristics generally attributed to that class or type of distilled spirits alters the class and type thereof, and the product shall be appropriately redesignated. In addition, in the case of straight whisky the removal of more than 15 percent of the fixed acids, or volatile acids, or esters, or soluble solids, or higher alcohols, or more than 25 percent of the soluble color, shall be deemed to alter the class or type thereof.</P>
          <P>(c) <E T="03">Exceptions.</E> (1) This section shall not be construed as in any manner modifying the standards of identity for cordials and liqueurs, flavored brandy, flavored gin, flavored rum, flavored vodka, and flavored whisky or as authorizing any product which is defined in § 5.22(j), Class 10, as an imitation to be otherwise designated.</P>
          <P>(2) [Reserved]</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30. 1969, as amended by T.D. ATF-360, 59 FR 67222, 67223, Dec. 29, 1994; T.D. ATF-369, 61 FR 67327, Dec. 29, 1995]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart Ca—Formulas</HD>
        <SOURCE>
          <HD SOURCE="HED">Source:</HD>
          <P>T.D. ATF-62, 44 FR 71620, Dec. 11, 1979, unless otherwise noted.</P>
        </SOURCE>
        <SECTION>
          <SECTNO>§ 5.25</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>The requirements of this subpart shall apply to:</P>
          <P>(a) Proprietors of distilled spirits plants qualified as processors under 27 CFR part 19;</P>
          <P>(b) Persons in Puerto Rico who manufacture distilled spirits products for shipment to the United States. Formulas need only be filed for those products which will be shipped to the United States; and</P>
          <P>(c) Persons who ship into the United States, Virgin Islands distilled spirits products.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.26</SECTNO>
          <SUBJECT>Formula requirements.</SUBJECT>
          <P>(a) <E T="03">General.</E> An approved formula is required to blend, mix, purify, refine, compound, or treat spirits in a manner which results in a change of character, <PRTPAGE P="57"/>composition, class or type of the spirits. Form 5110.38 (27-B Supplemental) shall be filed in accordance with the instructions on the form and shall designate all ingredients and, if required, the process used. Any approved formula on Form 27-B Supplemental or Form 5110.38 shall remain in effect until revoked, superseded, or voluntarily surrendered. Any existing qualifying statements as to the rate of tax or the limited use of drawback flavors appearing on a Form 27-B Supplemental are obsolete.</P>
          <P>(b) <E T="03">Change in formula.</E> Any change in an approved formula shall require the filing of a new Form 5110.38. After a change in a formula is approved, the original formula shall be surrendered to the appropriate TTB officer.</P>
          <CITA>[T.D. ATF-62, 44 FR 71620, as amended by T.D. ATF-425, 65 FR 11891, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.27</SECTNO>
          <SUBJECT>Formulas.</SUBJECT>
          <P>Formulas are required for distilled spirits operations which change the character, composition, class or type of spirits as follows:</P>
          <P>(a) The compounding of spirits through the mixing of any coloring, flavoring, wine, or other material with distilled spirits;</P>
          <P>(b) The manufacture of an intermediate product to be used exclusively in other distilled spirits products on bonded premises;</P>
          <P>(c) Any filtering or stabilizing process which results in a product which does not possess the taste, aroma, and characteristics generally attributed to that class or type of distilled spirits; and, in the case of straight whisky, results in the removal of more than 15 percent of the fixed acids, volatile acids, esters, soluble solids, or higher alcohols, or more than 25 percent of the soluble color;</P>
          <P>(d) The mingling of spirits (including merchandise returned to bond) which differ in class or type of materials from which produced;</P>
          <P>(e) The mingling of spirits stored in charred cooperage with spirits stored in plain or reused cooperage, or the mixing of spirits that have been treated with wood chips with spirits not so treated, or the mixing of spirits that have been subjected to any treatment which changes their character with spirits not so treated, unless it is determined that the composition of the spirits is the same, notwithstanding the storage in different kinds of cooperage or the treatment of a portion of the spirits;</P>
          <P>(f) The use (except as authorized for production or storage operations as provided by 27 CFR part 19) of any physical or chemical process or any apparatus which accelerates the maturing of the spirits;</P>
          <P>(g) The steeping or soaking of fruits, berries, aromatic herbs, roots, seeds, etc., in spirits or wines;</P>
          <P>(h) The artificial carbonating of spirits;</P>
          <P>(i) The blending in Puerto Rico of spirits with any liquors manufactured outside of Puerto Rico;</P>
          <P>(j) The production of gin by—</P>
          <P>(1) Redistillation over juniper berries and other natural aromatics, or the extracted oils of such, of spirits distilled at or above 190 degrees of proof, free from impurities, including spirits of such a nature recovered by redistillation of imperfect gin spirits; and</P>
          <P>(2) Mixing gin with other spirits;</P>
          <P>(k) The treatment of gin by—</P>
          <P>(1) Addition or abstraction of any substance or material other than pure water after redistillation in a manner that would change its class and type designation; and</P>
          <P>(2) Addition of any substance or material other than juniper berries or other natural aromatics, or the extracted oils of such, or pure water to the spirits, before or during redistillation, in a manner that would change its class and type designation;</P>
          <P>(l) The production of vodka by—</P>
          <P>(1) Treatment of neutral spirits with not less than one ounce of activated carbon per 100 wine gallons of spirits;</P>
          <P>(2) Redistillation of pure spirits so as to be without distinctive character, aroma, taste, or color;</P>
          <P>(3) Mixing with other spirits or with any other substance or material except pure water, after production; and</P>

          <P>(m) The recovery of spirits by redistillation from distilled spirits products containing other alcoholic ingredients and from spirits which have previously been entered for deposit. However, no <PRTPAGE P="58"/>formula shall be required for spirits redistilled into any type of neutral spirits other than vodka or spirits redistilled at less than 190 degrees of proof which lack the taste, aroma and other characteristics generally attributed to whisky, brandy, rum, or gin, and are designated as “Spirits,” preceded or followed by a word or phrase descriptive of the material from which produced. Such spirits redistilled on or after July 1, 1972, may not be designated “Spirits Grain” or “Grain Spirits.”</P>
          <SECAUTH>(26 U.S.C. 7805 (68A Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          <CITA>[T.D. ATF-198, 50 FR 8463, Mar. 1, 1985, as amended by T.D. ATF-259, 52 FR 41423, Oct. 28, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.28</SECTNO>
          <SUBJECT>Adoption of predecessor's formulas.</SUBJECT>
          <P>The adoption by a successor of approved Forms 5110.38 (27-B Supplemental) shall be in the form of an application filed with the appropriate TTB officer. The application shall list the formulas for adoption by:</P>
          <P>(a) Formula number,</P>
          <P>(b) Name of product, and</P>
          <P>(c) Date of approval.</P>
          <FP>The application shall clearly show that the predecessor has authorized the use of his previously approved formulas by the successor.</FP>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart D—Labeling Requirements for Distilled Spirits</HD>
        <SECTION>
          <SECTNO>§ 5.31</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>(a) <E T="03">Application.</E> No person engaged in business as a distiller, rectifier, importer, wholesaler, or warehouseman and bottler, directly or indirectly, or through an affiliate, shall sell or ship or deliver for sale or shipment or otherwise introduce in interstate or foreign commerce, or receive therein, or remove from customs custody, any distilled spirits in bottles, unless such bottles are marked, branded, labeled, or packaged, in conformity with §§ 5.31 through 5.42.</P>
          <P>(b) <E T="03">Alteration of labels.</E> It shall be unlawful for any person to alter, mutilate, destroy, obliterate, or remove any mark, brand, or label on distilled spirits held for sale in interstate or foreign commerce or after shipment therein, except:</P>
          <P>(1) As authorized by Federal law;</P>
          <P>(2) When an additional labeling or relabeling of bottled distilled spirits is accomplished with labels covered by certificates of label approval which comply with the requirements of this part and with State law;</P>
          <P>(3) That there may be added to the bottle, after removal from customs custody, or prior to or after removal from bonded premises, without application for permission to relabel, a label identifying the wholesale or retail distributor thereof or identifying the purchaser or consumer, and containing no references whatever to the characteristics of the product.</P>
          <SECAUTH>(26 U.S.C. 7805 (68A Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          <CITA>[T.D. 7020, 34 FR 20637, Dec. 30, 1969, as amended by T.D. ATF-62, 44 FR 71621, Dec. 11, 1979; T.D. ATF-198, 50 FR 8464, Mar. 1, 1985]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.32</SECTNO>
          <SUBJECT>Mandatory label information.</SUBJECT>
          <P>There shall be stated:</P>
          <P>(a) On the brand label:</P>
          <P>(1) Brand name.</P>
          <P>(2) Class and type, in accordance with § 5.35.</P>
          <P>(3) Alcoholic content, in accordance with § 5.37.</P>
          <P>(4) In the case of distilled spirits packaged in containers for which no standard of fill is prescribed in § 5.47, net contents in accordance with § 5.38(b) or § 5.38a(b)(2).</P>
          <P>(b) On the brand label or on a back label:</P>
          <P>(1) Name and address, in accordance with § 5.36.</P>
          <P>(2) In the case of imported spirits, the country of origin, in accordance with § 5.36.</P>
          <P>(3) In the case of distilled spirits packaged in containers conforming to the standards of fill prescribed in § 5.47 or § 5.47a, net contents in accordance with § 5.38(a), § 5.38a(a), or § 5.38a(b)(1).</P>
          <P>(4) Coloring or flavoring, in accordance with § 5.39.</P>
          <P>(5) A statement that the product contains FD&amp;C Yellow No. 5, where that coloring material is used in a product bottled on or after October 6, 1984.</P>
          <P>(6) [Reserved]<PRTPAGE P="59"/>
          </P>
          <P>(7) <E T="03">Declaration of sulfites.</E> There shall be stated, the statement “Contains sulfites” or “Contains (a) sulfiting agent(s)” or a statement identifying the specific sulfiting agent where sulfur dioxide or a sulfiting agent is detected at a level of 10 or more parts per million, measured as total sulfur dioxide. The sulfite declaration may appear on a strip label or neck label in lieu of appearing on the front or back label. The provisions of this paragraph shall apply to:</P>
          <P>(i) Any certificate of label approval issued on or after January 9, 1987;</P>
          <P>(ii) Any distilled spirits bottled on or after July 9, 1987, regardless of the date of issuance of the certificate of label approval; and,</P>
          <P>(iii) Any distilled spirits removed on or after January 9, 1988.</P>
          <P>(8) Percentage of neutral spirits and name of commodity from which distilled, or in the case of continuously distilled neutral spirits or gin, the name of the commodity only, in accordance with § 5.39.</P>
          <P>(9) A statement of age or age and percentage, when required, in accordance with § 5.40.</P>
          <P>(10) State of distillation of domestic types of whisky and straight whisky, except light whisky and blends, in accordance with § 5.36.</P>
          <P>(c) In the case of a container which has been excepted under the provisions of § 5.46(d), the information required to appear on the “brand label,” as defined, may appear elsewhere on such container if it can be demonstrated that the container cannot reasonably be so designed that the required brand label can be properly affixed.</P>
          <APPRO>(Paragraph (b)(7) approved by the Office of Management and Budget under Control No. 1512-0469)</APPRO>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-25, 41 FR 10220, Mar. 10, 1976; 41 FR 11022, Mar. 16, 1976; T.D. ATF-94, 46 FR 55096, Nov. 6, 1981; T.D. ATF-150, 48 FR 45556, Oct. 6, 1983; 48 FR 46518, Oct. 13, 1983; T.D. ATF-220, 50 FR 51852, Dec. 20, 1985; T.D. ATF-236, 51 FR 34710, Sept. 30, 1986; T.D. ATF-282, 54 FR 7162, Feb. 16, 1989; T.D. ATF-312, 56 FR 31077, July 9, 1991; T.D. ATF-344, 58 FR 40354, July 28, 1993; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000; T.D TTB-12, 69 FR 33574, June 16, 2004]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.32a</SECTNO>
          <SUBJECT>Voluntary disclosure of major food allergens.</SUBJECT>
          <P>(a) <E T="03">Definitions.</E> For purposes of this section the following terms have the meanings indicated.</P>
          <P>(1) <E T="03">Major food allergen. Major food allergen</E> means any of the following:</P>
          <P>(i) Milk, egg, fish (for example, bass, flounder, or cod), Crustacean shellfish (for example, crab, lobster, or shrimp), tree nuts (for example, almonds, pecans, or walnuts), wheat, peanuts, and soybeans; or</P>
          <P>(ii) A food ingredient that contains protein derived from a food specified in paragraph (a)(1)(i) of this section, except:</P>
          <P>(A) Any highly refined oil derived from a food specified in paragraph (a)(1)(i) of this section and any ingredient derived from such highly refined oil; or</P>
          <P>(B) A food ingredient that is exempt from major food allergen labeling requirements pursuant to a petition for exemption approved by the Food and Drug Administration (FDA) under 21 U.S.C. 343(w)(6) or pursuant to a notice submitted to FDA under 21 U.S.C. 343(w)(7), provided that the food ingredient meets the terms or conditions, if any, specified for that exemption.</P>
          <P>(2) <E T="03">Name of the food source from which each major food allergen is derived. Name of the food source from which each major food allergen is derived</E> means the name of the food as listed in paragraph (a)(1)(i) of this section, except that:</P>
          <P>(i) In the case of a tree nut, it means the name of the specific type of nut (for example, almonds, pecans, or walnuts);</P>
          <P>(ii) In the case of Crustacean shellfish, it means the name of the species of Crustacean shellfish (for example, crab, lobster, or shrimp); and</P>
          <P>(iii) The names “egg” and “peanuts”, as well as the names of the different types of tree nuts, may be expressed in either the singular or plural form, and the term “soy”, soybean”, or “soya” may be used instead of “soybeans”.</P>
          <P>(b) <E T="03">Voluntary labeling standards.</E> Major food allergens (defined in paragraph (a)(1) of this section) used in the production of a distilled spirit product may, on a voluntary basis, be declared on any label affixed to the container. <PRTPAGE P="60"/>However, if any one major food allergen is voluntarily declared, all major food allergens used in production of the distilled spirit product, including major food allergens used as fining or processing agents, must be declared, except when covered by a petition for exemption approved by the appropriate TTB officer under § 5.32b. The major food allergens declaration must consist of the word “Contains” followed by a colon and the name of the food source from which each major food allergen is derived (for example, “Contains: egg”).</P>
          <P>(c) <E T="03">Cross reference.</E> For mandatory labeling requirements applicable to distilled spirits products containing FD&amp;C Yellow No. 5 and sulfites, see §§ 5.32(b)(5) and (7).</P>
          <CITA>[T.D. TTB-53, 71 FR 42268, July 26, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.32b</SECTNO>
          <SUBJECT>Petitions for exemption from major food allergen labeling.</SUBJECT>
          <P>(a) <E T="03">Submission of petition.</E> Any person may petition the appropriate TTB officer to exempt a particular product or class of products from the labeling requirements of § 5.32a. The burden is on the petitioner to provide scientific evidence (including the analytical method used to produce the evidence) that demonstrates that the finished product or class of products, as derived by the method specified in the petition, either:</P>
          <P>(1) Does not cause an allergic response that poses a risk to human health; or</P>
          <P>(2) Does not contain allergenic protein derived from one of the foods identified in § 5.32a(a)(1)(i), even though a major food allergen was used in production.</P>
          <P>(b) <E T="03">Decision on petition.</E> TTB will approve or deny a petition for exemption submitted under paragraph (a) of this section in writing within 180 days of receipt of the petition. If TTB does not provide a written response to the petitioner within that 180-day period, the petition will be deemed denied, unless an extension of time for decision is mutually agreed upon by the appropriate TTB officer and the petitioner. TTB may confer with the Food and Drug Administration (FDA) on petitions for exemption, as appropriate and as FDA resources permit. TTB may require the submission of product samples and other additional information in support of a petition; however, unless required by TTB, the submission of samples or additional information by the petitioner after submission of the petition will be treated as the withdrawal of the initial petition and the submission of a new petition. An approval or denial under this section will constitute a final agency action.</P>
          <P>(c) <E T="03">Resubmission of a petition.</E> After a petition for exemption is denied under this section, the petitioner may resubmit the petition along with supporting materials for reconsideration at any time. TTB will treat this submission as a new petition for purposes of the time frames for decision set forth in paragraph (b) of this section.</P>
          <P>(d) <E T="03">Availability of information</E>—(1) <E T="03">General.</E> TTB will promptly post to its public Web site, <E T="03">http://www.ttb.gov,</E> all petitions received under this section as well as TTB's responses to those petitions. Any information submitted in support of the petition that is not posted to the TTB Web site will be available to the public pursuant to 5 U.S.C. 552, except where a request for confidential treatment is granted under paragraph (d)(2) of this section.</P>
          <P>(2) <E T="03">Requests for confidential treatment of business information.</E> A person who provides trade secrets or other commercial or financial information in connection with a petition for exemption under this section may request that TTB give confidential treatment to that information. A failure to request confidential treatment at the time the information in question is submitted to TTB will constitute a waiver of confidential treatment. A request for confidential treatment of information under this section must conform to the following standards:</P>
          <P>(i) The request must be in writing;</P>
          <P>(ii) The request must clearly identify the information to be kept confidential;</P>

          <P>(iii) The request must relate to information that constitutes trade secrets or other confidential commercial or financial information regarding the business transactions of an interested person, the disclosure of which would cause substantial harm to the competitive position of that person;<PRTPAGE P="61"/>
          </P>
          <P>(iv) The request must set forth the reasons why the information should not be disclosed, including the reasons the disclosure of the information would prejudice the competitive position of the interested person; and</P>
          <P>(v) The request must be supported by a signed statement by the interested person, or by an authorized officer or employee of that person, certifying that the information in question is a trade secret or other confidential commercial or financial information and that the information is not already in the public domain.</P>
          <CITA>[T.D. TTB-53, 71 FR 42268, July 26, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.33</SECTNO>
          <SUBJECT>Additional requirements.</SUBJECT>
          <P>(a) <E T="03">Contrasting background.</E> Labels shall be so designed that the statements required by this subpart are readily legible under ordinary conditions, and such statements shall be on a contrasting background.</P>
          <P>(b) <E T="03">Location of statements and size of type.</E> (1) Statements required by this subpart, except brand names, shall appear generally parallel to the base on which the bottle rests as it is designed to be displayed or shall be otherwise equally conspicuous.</P>
          <P>(2) Statements required by this subpart, except brand names and the declaration of sulfites in § 5.32(b)(7), shall be separate and apart from any other descriptive or explanatory matters.</P>
          <P>(3) If not separate and apart from other descriptive or explanatory matter printed on the label, the statement declaring the presence of sulfites shall be of a size substantially more conspicuous than surrounding nonmandatory labeling information.</P>
          <P>(4) Statements of the type of distilled spirits shall be as conspicuous as the statement of the class to which it refers, and in direct conjunction therewith.</P>
          <P>(5) Statements required by this subpart, except brand names, shall be in script, type, or printing not smaller than 2 millimeters (or 8-point gothic until January 1, 1983), except that, in the case of labels on bottles of 200 milliliters or less capacity, such script, type, or printing shall not be smaller than 1 millimeter (or 6-point gothic until January 1, 1983).</P>
          <P>(6) When net contents are stated either in metric measures or in both metric and U.S. fluid measures, statements required by the subpart, except brand names, shall be in script, type, or printing not smaller than 2 millimeters (or 8-point gothic until January 1, 1983), except that, in the case of labels on bottles of 200 milliliters or less capacity such script, type, or printing shall not be smaller than 1 millimeter (or 6-point gothic until January 1, 1983).</P>
          <P>(c) <E T="03">English language.</E> The requirements of this subpart shall be stated in the English language, except that the brand name need not be in English, and for products bottled for consumption within Puerto Rico the required information may be stated in the Spanish language if the net contents and, if the product is an imitation, the word “imitation” are also stated in the English language.</P>
          <P>(d) <E T="03">Location of label.</E> Labels shall not obscure government stamps or be obscured thereby. Labels shall not obscure any markings or information required to be permanently marked in the bottle by other U.S. Treasury Department regulations.</P>
          <P>(e) <E T="03">Labels firmly affixed.</E> Labels which are not an integral part of the bottle shall be affixed to bottles in such manner that they cannot be removed without thorough application of water or other solvents.</P>
          <P>(f) <E T="03">Additional information on labels.</E> Labels may contain information other than the mandatory label information required by this subpart if the information does not conflict with, or in any manner qualify, statements required by this part.</P>
          <P>(g) <E T="03">Contents of bottles.</E> A complete and accurate statement of the contents of the bottles to which labels are to be or have been affixed shall be submitted, on request, to the appropriate TTB officer.</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-66, 45 FR 40548, June 13, 1980; T.D. ATF-94, 46 FR 55096, Nov. 6, 1981; T.D. ATF-236, 51 FR 34710, Sept. 30, 1986; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.34</SECTNO>
          <SUBJECT>Brand names.</SUBJECT>
          <P>(a) <E T="03">Misleading brand names.</E> No label shall contain any brand name, which, <PRTPAGE P="62"/>standing alone, or in association with other printed or graphic matter, creates any impression or inference as to the age, origin, identity, or other characteristics of the product unless the appropriate TTB officer finds that such brand name (when appropriately qualified if required) conveys no erroneous impressions as to the age, origin, identity, or other characteristics of the product.</P>
          <P>(b) <E T="03">Trade name of foreign origin.</E> Paragraph (a) of this section does not prohibit the use by any person of any trade name or brand of foreign origin not effectively registered in the U.S. Patent Office on August 29, 1935, which has been used by such person or his predecessors in the United States for a period of at least 5 years immediately preceding August 29, 1935: <E T="03">Provided,</E> That if such trade name or brand is used, the designation of the product shall be qualified by the name of the locality in the United States in which produced, and such qualification shall be in script, type, or printing as conspicuous as the trade name or brand.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.35</SECTNO>
          <SUBJECT>Class and type.</SUBJECT>
          <P>(a) <E T="03">Designation of product.</E> The class and type of distilled spirits shall be stated in conformity with § 5.22 if defined therein. In all other instances the product shall be designated in accordance with trade and consumer understanding thereof, or, if no such understanding exists, by a distinctive or fanciful name, and in either case (except as provided in paragraph (b)(2) of this section) followed by a truthful and adequate statement of composition. The word “cordial” or “liqueur” need not be stated in the case of cordials and liqueurs unless the appropriate TTB officer finds such word is necessary to clearly indicate that the product is a cordial or liqueur.</P>
          <P>(b) <E T="03">Products designed in accordance with trade and consumer understanding.</E> In the case of products designated in accordance with trade and consumer understanding:</P>
          <P>(1) A statement of the classes and types of distilled spirits used in the manufacture thereof shall be deemed a sufficient statement of composition in the case of highballs, cocktails, and similar prepared specialties when the designation adequately indicates to the consumer the general character of the product.</P>
          <P>(2) No statement of composition is required if the designation through general and established usage adequately indicates to the consumer the composition of the product.</P>
          <FP>A product shall not bear a designation which indicates it contains a class or type of distilled spirits unless the distilled spirits therein conform to such class and type.</FP>
          <P>(c) <E T="03">Origin of whiskies in mixtures.</E> In the case of any of the types of whisky defined in § 5.22(b), Class 2, which contains any whisky or whiskies produced in a country other than that indicated by the type designation, there shall be stated on the brand label the percentage of such whisky and the country or origin thereof. In the case of mixtures of whisky, not conforming to any type designation in § 5.22(b), Class 2, the components of which were distilled in more than one country, there shall be stated in direct conjunction with the class designation “whisky” a truthful and adequate statement of the composition of the product.</P>
          <P>(d) <E T="03">Whisky manufactured in Scotland, Ireland, or Canada.</E> All whisky manufactured in Scotland, Ireland, or Canada, shall be deemed to be Scotch, Irish, or Canadian whisky, and shall be so designated, in conformity with § 5.22(b) (7), (8), and (9), unless the application of such designation to the particular product will result in consumer deception, or unless such a product is not entitled to such designation under the laws of the country in which manufactured.</P>
          <P>(e) <E T="03">Cordials and liqueurs.</E> The alcoholic components of cordails and liqueurs may, but need not, be stated on labels.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.36</SECTNO>
          <SUBJECT>Name and address.</SUBJECT>
          <P>(a) <E T="03">“Bottled by”.</E> (1) On labels of domestic distilled spirits there shall be stated the phrase “bottled by”, “packed by”, or “filled by”, immediately followed by the name (or trade name) of the bottler and the place where such distilled spirits are bottled. <PRTPAGE P="63"/>If the bottler is the actual bona fide operator of more than one distilled spirits plant engaged in bottling operations, there may, in addition, be stated immediately following the name (or trade name) of such bottler the addresses of such other plants.</P>
          <P>(2) Where distilled spirits are bottled by or for the distiller thereof, there may be stated, in lieu of the phrase “bottled by”, “packed by”, or “filled by”, followed by the bottler's name (or trade name) and address, the phrase “distilled by”, followed by the name, or the trade name under which the particular spirits were distilled, or (except in the case of distilled spirits labeled as bottled in bond) any trade name shown on the distiller's permit (covering the premises where the particular spirits were distilled), and the address (or addresses) of the distiller.</P>
          <P>(3) Where “straight whiskies” of the same type which have been produced in the same State by two or more different distillers are combined (either at time of bottling or at a warehouseman's bonded premises for further storage) and subsequently bottled and labeled as “straight whisky,” such “straight whisky” shall be labeled in accordance with the requirements of paragraph (a)(1) of this section. Where such “straight whisky” is bottled by or for the distillers thereof, there may be stated on the label, in lieu of the requirements of paragraph (a)(1) of this section, the phraise “distilled by,” followed by the names (or trade names) of the different distillers who distilled a portion of the “straight whisky,” the addresses of the distilleries where the “straight whisky” was distilled, and the percentage of “straight whisky” distilled by each distiller (with a tolerance of plus or minus 2 percent). In the case where “straight whisky” is made up of a mixture of “straight whiskies” of the same type from two or more different distilleries of the same proprietor located within the same State, and where the “straight whisky” is bottled by or for the proprietor thereof, such “straight whisky” may be labeled, in lieu of the requirements of paragraph (a)(1) of the this section, with the phrase “distilled by” followed by the name (or trade name) of the proprietor and the addresses of the different distilleries which distilled a portion of the “straight whisky.”</P>
          <P>(4) Where distilled spirits are bottled by or for the rectifier thereof, there may be stated, in lieu of the phrase “bottled by”, “packed by”, or “filled by”, followed by the bottler's name (or trade name) and address, the phrases “blended by”, “made by”, “prepared by”, “manufactured by”, or “produced by” (whichever may be appropriate to the act of rectification involved) followed by the name (or trade name), and the address (or addresses) of the rectifier.</P>
          <P>(5) In addition to the requirements of paragraphs (a)(1) and (a)(2) of this paragraph, the labels of bottled in bond spirits shall bear the real name of the distillery or the trade name under which the distillery produced and warehoused the spirits, the number of the plant in which produced and the number of the plant in which bottled.</P>
          <P>(6) The label may state the address of the proprietor's principal place of business in lieu of the place where the bottling, distilling or rectification operation occurred, if the address where the operation occurred is indicated by printing, coding, or other markings, on the label or on the bottle.</P>
          <P>(b) <E T="03">“Imported by”.</E> (1) On labels of imported distilled spirits, bottled prior to importation, there shall be stated the words “imported by”, “imported exclusively by”, or a similar appropriate phrase, and immediately thereafter the name of the importer, or exclusive agent, or sole distributor, or other person responsible for the importation, together with the principal place of business in the United States of such person.</P>
          <P>(2) On labels of imported distilled spirits bottled after importation there shall be stated:</P>
          <P>(i) The name of the bottler and place where bottled, immediately preceded by the words “bottled by”, “packed by”, or “filled by”; or</P>

          <P>(ii) The name of the bottler and place where bottled, immediately preceded by the words “bottled by”, “packed by”, or “filled by” and in conjunction therewith the name and address of the person responsible for the importation, in the manner prescribed in paragraph (b)(1) of this section; or<PRTPAGE P="64"/>
          </P>
          <P>(iii) The name and principal place of business in the United States of the person responsible for the importation, if the spirits are bottled for such person, immediately preceded by the phrase “imported by and bottled (packed), (filled) in the United States for” (or a similar appropriate phrase); or,</P>
          <P>(iv) In the case of imported distilled spirits bottled after importation by the person responsible for the importation, the words “imported and bottled (packed), (filled) by”, “imported and bottled (packed), (filled) exclusively by”, or a similar appropriate phrase, and immediately thereafter the name of such person and the address of the place where bottled or the address of such person's principal place of business.</P>
          <P>(c) <E T="03">Post office address.</E> The “place” stated shall be the post office address, except that the street address may be omitted. No additional places or addresses shall be stated for the same person, firm or corporation, unless (1) such person or retailer is actively engaged in the conduct of an additional bona fide and actual alcoholic beverage business at such additional place or address, and (2) the label also contains in direct conjunction therewith, appropriate descriptive material indicating the function occurring at such additional place or address.</P>
          <P>(d) <E T="03">State of distillation.</E> Except in the case of “light whisky”, “blended light whisky”, “blended whisky”, “a blend of straight whiskies”, or “spirit whisky”, the State of distillation shall be shown on the label of any whisky produced in the United States if the whisky is not distilled in the State given in the address on the brand label. The appropriate TTB officer may, however, require the State of distillation to be shown on the label or he may permit such other labeling as may be necessary to negate any misleading or deceptive impression which might be created as to the actual State of distillation. In the case of “light whisky”, as defined in § 5.22(b)(3), the State of distillation shall not appear in any manner on any label, when the appropriate TTB officer finds such State is associated by consumers with an American type whisky, except as a part of a name and address as set forth in paragraph (a) of this section.</P>
          <P>(e) <E T="03">Country of origin.</E> On labels of imported distilled spirits there shall be stated the country of origin in substantially the following form “Product of ______”, the blank to be filled in with the name of the country of origin.</P>
          <P>(f) <E T="03">Trade names.</E> The trade name of any permittee appearing on any label must be identical to the trade name listed on the permittee's basic permit.</P>
          <SECAUTH>(26 U.S.C. 7805 (68A Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          <CITA>[T.D. 7020, 34 FR 20637, Dec. 30, 1969, as amended by T.D. ATF-62, 44 FR 71621, Dec. 11, 1979; T.D. ATF-198, 50 FR 8464, Mar. 1, 1985; T.D. ATF-259, 52 FR 41423, Oct. 28, 1987; T.D. ATF-260, 52 FR 42101, Nov. 3, 1987; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.37</SECTNO>
          <SUBJECT>Alcohol content.</SUBJECT>
          <P>(a) <E T="03">Statements</E>—(1) <E T="03">Mandatory statement.</E> The alcohol content for distilled spirits shall be stated in percent-alcohol-by-volume. Products such as “Rock and Rye. or similar products containing a significant amount of solid material shall state the alcohol content at the time of bottling as follows: “Bottled at ___ percent-alcohol-by-volume.”</P>
          <P>(2) <E T="03">Optional statement.</E> In addition, the label may also state the alcohol content in degrees of proof if this information appears in direct conjunction (i.e. with no intervening material) with the statement expressed in percent-alcohol-by-volume. If both forms of alcohol content are shown, the optional statement in degrees of proof shall be placed in parentheses, in brackets, or otherwise distinguished from the mandatory statement in percent-alcohol-by-by-volume to emphasize the fact that both expressions of alcohol content mean the same thing.</P>
          <P>(b) <E T="03">Tolerances.</E> The following tolerances shall be allowed (without affecting the labeled statement of alcohol content) for losses of alcohol content occurring during bottling:</P>
          <P>(1) Not to exceed 0.25 percent alcohol by volume for spirits containing solids in excess of 600 mg per 100 ml; or</P>

          <P>(2) Not to exceed 0.25 percent alcohol by volume for any spirits product bottled in 50 or 100 ml size bottles; or<PRTPAGE P="65"/>
          </P>
          <P>(3) Not to exceed 0.15 percent alcohol by volume for all other spirits.</P>
          <APPRO>(Approved by the Office of Management and Budget under Control Number 1512-0482)</APPRO>
          <SECAUTH>(Sec. 201, Pub. L. 85-859, 72 Stat. 1394, as amended (26 U.S.C. 5301(a)); 49 Stat. 917, as amended (27 U.S.C. 205(e))</SECAUTH>
          <CITA>[T.D. ATF-237, 51 FR 36394, Oct. 10, 1986, as amended by T.D. ATF-288, 54 FR 47769, Nov. 17, 1989]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.38</SECTNO>
          <SUBJECT>Net contents.</SUBJECT>
          <P>(a) <E T="03">Bottles conforming to metric standards of fill.</E> The net contents of distilled spirits shall be stated in the same manner and form as set forth in the standards of fill in § 5.47a.</P>
          <P>(b) <E T="03">Bottles not conforming to the metric standards of fill.</E> The net contents for distilled spirits bottled before January 1, 1980, in bottles not conforming to the metric standards of fill, shall be stated in the same manner and form as set forth in § 5.47(a), except for cordials and liqueurs, cocktails, highballs, bitters and specialties, as specified by the Administrator. The net contents for these specialty products shall be stated in U.S. measure (i.e., gallons, quarts, pints, fluid ounces).</P>
          <P>(c) <E T="03">Net contents marked in bottles.</E> The net contents need not be marked on any lable if they are legibly blown, etched, sandblasted, marked by underglaze coloring, or otherwise permanently marked by any method approved by the appropriate TTB officer on the side, front, or back of the container in an unobscured location. containers of 200 ml or greater capacity shall bear letters and figures of not less than one-quarter inch height.</P>
          <P>(d) <E T="03">Qualifying statements.</E> Words or phrases qualifying statements of net contents are prohibited.</P>
          <SECAUTH>(Sec. 5, 49 Stat. 981, as amended (27 U.S.C. 205); 26 U.S.C. 5301)</SECAUTH>
          <CITA>[T.D. ATF-146, 48 FR 43321, Sept. 23, 1983, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.39</SECTNO>
          <SUBJECT>Presence of neutral spirits and coloring, flavoring, and blending materials.</SUBJECT>
          <P>(a) <E T="03">Neutral spirits and name of commodity.</E> (1) In the case of distilled spirits (other than cordials, liqueurs, and specialties) produced by blending or rectification, if neutral spirits have been used in the production thereof, there shall be stated the percentage of neutral spirits so used and the name of the commodity from which such neutral spirits have been distilled. The statement of percentage and the name of the commodity shall be made in substantially the following form: “____% neutral spirits distilled from _______ (insert grain, cane products, or fruit as appropriate)”; or “____% neutral spirits (vodka) distilled from _______ (insert grain, cane products, or fruit, as appropriate)”; or “____% grain (cane products), (fruit) neutral spirits”, or “____% grain spirits.”</P>
          <P>(2) In the case of neutral spirits or of gin produced by a process of continuous distillation, there shall be stated the name of the commodity from which such neutral spirits or gin have been distilled. The statement of the name of the commodity shall be made in substantially the following form: “Distilled from grain”, or “Distilled from cane products”, or “Distilled from fruit”.</P>
          <P>(b) <E T="03">Coloring materials.</E> The words “artifically colored” shall be stated on the label of any distilled spirits containing synthetic or natural materials which primarily contribute color, or when the label conveys the impression that the color is derived from a source other than the actual source, except that:</P>
          <P>(1) If no coloring material other than natural flavoring material has been added, there may be stated in lieu of the words “artificially colored” a truthful and adequate statement of the source of the color;</P>
          <P>(2) If no coloring material other than those certified as suitable for use in foods by the Food and Drug Administration has been added, there may be stated in lieu of the words “artificially colored,” the words “certified color added”; and</P>

          <P>(3) If no coloring material other than caramel has been added, there may be stated in lieu of the words “artificially colored,” the words “colored with caramel,” or a substantially similar statement, but no such statement is required for the use of caramel in brandy, <PRTPAGE P="66"/>rum, or tequila, or in any type of whisky other than straight whisky.</P>
          <P>(c) <E T="03">Treatment with wood.</E> The words “colored and flavored with wood ___ (insert chips, slabs, etc., as appropriate)” shall be stated as a part of the class and type designation for whisky and brandy treated, in whole or in part, with wood through percolation, or otherwise, during distillation or storage, other than through contact with the oak container. <E T="03">Provided,</E> that the above statement shall not apply to brandy treated with an infusion of oak chip in accordance with § 5.23(a).</P>
          <CITA>[T.D. 720, 34 FR 20637, Dec. 30, 1969, as amended by T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-292, 55 FR 1065, Jan. 11, 1990]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.40</SECTNO>
          <SUBJECT>Statements of age and percentage.</SUBJECT>
          <P>(a) <E T="03">Statements of age and percentage for whisky.</E> In the case of straight whisky bottled in conformity with the bottled in bond labeling requirements and of domestic or foreign whisky, whether or not mixed or blended, all of which is 4 years old or more, statements of age and percentage are optional. As to all other whiskies there shall be stated the following:</P>
          <P>(1) In the case of whisky, whether or not mixed or blended but containing no neutral spirits, the age of the youngest whisky. The age statement shall read substantially as follows: “___ years old.”</P>
          <P>(2) In the case of whisky, containing neutral spirits, if any of the straight whisky and/or other whisky is less than 4 years old, the percentage by volume of straight whisky and/or other whisky, and the age of the straight whisky (the youngest if two or more) and the age of such other whisky (the youngest if two or more). If all the straight whisky and/or other whisky is 4 years or more old, the age and percentage statement for such whiskies is optional. The age and percentage statement for straight whiskies and/or other whisky, whether required or optional, shall be stated in immediate conjunction with the neutral spirits statement required by § 5.39, and shall read substantially as follows:</P>
          <P>(i) If only one straight whisky and no other whisky is contained in the blend: “__ percent straight whisky __ years old.”</P>
          <P>(ii) If more than one straight whisky and no other whisky is contained in the blend: “__ percent straight whiskies __ years or more old.” The age blank shall be filled in with the age of the youngest straight whisky. In lieu of the foregoing, a statement may be made of the ages and percentages of each of the straight whiskies contained in the blend: “__ percent straight whisky __ years old, __ percent straight whisky __ years old, and __ percent straight whisky __ years old.”</P>
          <P>(iii) If only one straight whisky and one other whisky is contained in the blend: “__ percent straight whisky __ years old, __ percent whisky __ years old.”</P>
          <P>(iv) If more than one straight whisky and more than one other whisky is contained in the blend: “__ percent straight whiskies __ years or more old, __ percent whiskies __ years or more old.” The age blanks shall be filled in with the ages of the youngest straight whisky and the youngest other whisky. In lieu of the foregoing, a statement may be made of the ages and percentages of each of the straight whiskies and other whiskies contained in the blend: “__ percent straight whisky __ years old, __ percent straight whisky __ years old, __ percent whisky __ years old, and __ percent whisky __ years old.”</P>
          <P>(3) In the case of imported whiskies described in § 5.22(l), Class 12, the labels shall state the ages and percentages in the same manner and form as is required for the same type of whisky produced in the United States.</P>
          <P>(4) Notwithstanding the foregoing provisions of this paragraph, in the case of whisky produced in the United States and stored in reused oak containers, except for corn whisky, and for light whisky produced on or after January 26, 1968, there shall be stated in lieu of the words “__ years old” the period of storage in reused oak containers as follows: “__ stored __ years in reused cooperage.”</P>

          <P>(5) Optional age statements shall appear in the same form as required age statements.<PRTPAGE P="67"/>
          </P>
          <P>(b) <E T="03">Statements of age for rum, brandy, and Tequila.</E> Age may, but need not, be stated on labels of rums, brandies, and Tequila, except that an appropriate statement with respect to age shall appear on the brand label in case of brandy (other than immature brandies and fruit brandies which are not customarily stored in oak containers) not stored in oak containers for a period of at least 2 years. If age is stated, it shall be substantially as follows: “__ years old”; the blank to be filled in with the age of the youngest distilled spirits in the product.</P>
          <P>(c) <E T="03">Statement of storage for grain spirits.</E> In case of grain spirits, the period of storage in oak containers may be stated in immediate conjunction with the required percentage statement; for example, “__% grain spirits stored __ years in oak containers.”</P>
          <P>(d) <E T="03">Other distilled spirits.</E> Age, maturity, or similar statements or representations as to neutral spirits (except for grain spirits as stated in paragraph (c) of this section), gin, liqueurs, cordials, cocktails, highballs, bitters, flavored brandy, flavored gin, flavored rum, flavored vodka, flavored whisky, and specialties are misleading and are prohibited from being stated on any label.</P>
          <P>(e) <E T="03">Miscellaneous age representations.</E> (1) Age may be understated but shall not be overstated.</P>

          <P>(2) If any age, maturity, or similar representation is made relative to any distilled spirits (such representations for products enumerated in paragraph (d) of this section are prohibited), the age shall also be stated on all labels where such representation appears, and in a manner substantially as conspicuous as such representation: <E T="03">Provided.</E> That the use of the word “old” or other word denoting age, as part of the brand name, shall not be deemed to be an age representation: <E T="03">And provided further,</E> That the labels of whiskies and brandies (except immature brandies) not required to bear a statement of age, and rum and Tequila aged for not less than 4 years, may contain general inconspicuous age, maturity or similar representations without the label bearing an age statement.</P>
          <SECAUTH>(26 U.S.C. 7805 (68A Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          <CITA>[T.D. 7020, 34 FR 20637, Dec. 30, 1969, as amended by T.D. ATF-62, 44 FR 71621, Dec. 11, 1979; T.D. ATF-198, 50 FR 8464, Mar. 1, 1985]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.41</SECTNO>
          <SUBJECT>Bottle cartons, booklets and leaflets.</SUBJECT>
          <P>(a) <E T="03">General.</E> An individual covering, carton, or other container of the bottle used for sale at retail (other than a shipping container), or any written, printed, graphic, or other matter accompanying the bottle to the consumer buyer shall not contain any statement, design, device, or graphic, pictorial, or emblematic representation that is prohibited by §§ 5.31 through 5.42 on labels.</P>
          <P>(b) <E T="03">Sealed opaque cartons.</E> If bottles are enclosed in sealed opaque coverings, cartons, or other containers used for sale at retail (other than shipping containers), such coverings, cartons, or other containers must bear all mandatory label information.</P>
          <P>(c) <E T="03">Other cartons.</E> (1) If an individual covering, carton, or other container of the bottle used for sale at retail (other than a shipping container) is so designed that the bottle is readily removable, it may display any information which is not in conflict with the label on the bottle contained therein.</P>
          <P>(2) Cartons displaying brand names and/or designations must display such names and designations in their entirety—brand names required to be modified, e.g. by “Brand” or “Product of U.S.A.”, must also display such modification.</P>
          <P>(3) Specialty products for which a truthful and adequate statement of composition is required must display such statement.</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-36, 41 FR 47426, Oct. 29, 1976]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.42</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <P>(a) <E T="03">Statements on labels.</E> Bottles containing distilled spirits, or any labels on such bottles, or any individual covering, carton, or other container of such bottles used for sale at retail, or any written, printed, graphic, or other <PRTPAGE P="68"/>matter accompanying such bottles to the consumer shall not contain:</P>
          <P>(1) Any statement that is false or untrue in any particular, or that, irrespective of falsity, directly, or by ambiguity, omission, or inference, or by the addition of irrelevant, scientific or technical matter, tends to create a misleading impression.</P>
          <P>(2) Any statement that is disparaging of a competitor's product.</P>
          <P>(3) Any statement, design, device, or representation which is obscene or indecent.</P>
          <P>(4) Any statement, design, device, or representation of or relating to analyses, standards, or tests, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer.</P>
          <P>(5) Any statement, design, device, or representation of or relating to any guarantee, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer. Money-back guarantees are not prohibited.</P>

          <P>(6) A trade or brand name that is the name of any living individual of public prominence, or existing private or public organization, or is a name that is in simulation or is an abbreviation thereof, or any graphic, pictorial, or emblematic representation of any such individual or organization, if the use of such name or representation is likely to falsely lead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of, such individual or organization: <E T="03">Provided,</E> That this paragraph shall not apply to the use of the name of any person engaged in business as a distiller, rectifier, blender, or other producer, or as an importer, wholesaler, retailer, bottler, or warehouseman, of distilled spirits, nor to the use by any person of a trade or brand name that is the name of any living individual of public prominence or existing private or public organization, provided such trade or brand name was used by him or his predecessors in interest prior to August 29, 1935.</P>
          <P>(b) <E T="03">Miscellaneous.</E> (1) Labels shall not be of such design as to resemble or simulate a stamp of the U.S. Government or any State or foreign government. Labels, other than stamps authorized or required by this or any other government, shall not state or indicate that the distilled spirits are distilled, blended, made, bottled, or sold under, or in accordance with, any municipal, State, Federal, or foreign authorization, law, or regulations, unless such statement is required or specifically authorized by Federal, State, municipal, or foreign law or regulations. The statements authorized by this part to appear on labels for domestic distilled spirits are “Distilled (produced, barreled, warehoused, blended, or bottled, or any combination thereof, as the case may be) under United States (U.S.) Government supervision”, or in the case of distilled spirits labeled as bottled in bond, “Bottled in bond under United States (U.S.) Government supervision”. If the municipal, State, or Federal Government permit number is stated on a label, it shall not be accompanied by any additional statement relating thereto.</P>
          <P>(2) If imported distilled spirits are covered by a certificate of origin or of age issued by a duly authorized official of the appropriate foreign government, the label, except where prohibited by the foreign government, may refer to such certificate or the fact of such certification, but shall not be accompanied by any additional statement relating thereto. The reference to such certificate or certification shall, in the case of Cognac, be substantially in the following form: “This product accompanied at the time of importation by an ‘Acquit Regional Jaune d'Or’ issued by the French Government, indicating that this grape brandy was distilled in the Cognac Region of France”; and in the case of other distilled spirits, substantially in the following form: “This product accompanied at time of importation by a certificate issued by the __ government (name of government) indicating that the product is __ (class and type as required to be stated on the label), and (if label claims age) that none of the distilled spirits are of an age less than stated on this label.”</P>

          <P>(3) The words “bond”, “bonded”, “bottled in bond”, “aged in bond”, or phrases containing these or synonymous terms, shall not be used on any <PRTPAGE P="69"/>label or as part of the brand name of domestic distilled spirits unless the distilled spirits are:</P>
          <P>(i) Composed of the same kind of spirits produced from the same class of materials;</P>
          <P>(ii) Produced in the same distilling season by the same distiller at the same distillery;</P>
          <P>(iii) Stored for at least four years in wooden containers wherein the spirits have been in contact with the wood surface except for gin and vodka which must be stored for at least four years in wooden containers coated or lined with paraffin or other substance which will preclude contact of the spirits with the wood surface;</P>
          <P>(iv) Unaltered from their original condition or character by the addition or subtraction of any substance other than by filtration, chill proofing, or other physical treatments (which do not involve the addition of any substance which will remain incorporated in the finished product or result in a change in class or type);</P>
          <P>(v) Reduced in proof by the addition of pure water only to 100 degrees of proof; and</P>
          <P>(vi) Bottles at 100 degrees of proof.</P>
          <FP>In addition to the requirements of § 5.36(a) (1) or (2), the label shall bear the real name of the distillery or the trade name under which the distillery produced and warehoused the spirits, and the plant (or registered distillery) number in which produced; and the plant number in which bottled. The label may also bear the name or trade name of the bottler.</FP>
          <P>(4) The words “bond”, “bonded”, “bottled in bond”, “aged in bond”, or phrases containing these or synonymous terms, shall not be used on any label or as part of the brand name of imported distilled spirits unless the distilled spirits meet in all respects the requirements applicable to distilled spirits bottled for domestic consumption, so labeled, and unless the laws and regulations of the country in which such distilled spirits are produced authorize the bottling of distilled spirits in bond and require or specifically authorize such distilled spirits to be so labeled. All spirits labeled as “bonded”, “bottled in bond”, or “aged in bond” pursuant to the provisions of this paragraph shall bear in direct conjunction with such statement and in script, type, or printing substantially as conspicuous as that used on such statement, the name of the country under whose laws and regulations such distilled spirits were so bottled.</P>
          <P>(5) The word “pure” shall not be stated upon labels unless:</P>
          <P>(i) It refers to a particular ingredient used in the production of the distilled spirits, and is a truthful representation about that ingredient; or</P>
          <P>(ii) It is part of the bona fide name of a permittee or retailer for whom the distilled spirits are bottled; or</P>
          <P>(iii) It is part of the bona fide name of the permittee who bottled the distilled spirits.</P>
          <P>(6) Distilled spirits shall not be labeled as “double distilled” or ”triple distilled” or any similar term unless it is a truthful statement of fact; except that “double distilled” or “triple distilled” shall not be permitted on labels of distilled spirits produced by the redistillation method when a second or third distillation step is a necessary distillation process for the production of the product.</P>
          <P>(7) Labels shall not contain any statement, design, device, or pictorial representation which the appropriate TTB officer finds relates to, or is capable of being construed as relating to, the armed forces of the United States, or the American flag, or any emblem, seal, insignia, or decoration associated with such flag or armed forces; nor shall any label contain any statement, design, device, or pictorial representation of or concerning any flag, seal, coat of arms, crest or other insignia, likely to mislead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of the government, organization, family, or individual with whom such flag, seal, coat of arms, crest, or insignia is associated.</P>
          <P>(8) <E T="03">Health-related statements</E>—(i) <E T="03">Definitions.</E> When used in this paragraph (b)(8), terms are defined as follows:</P>
          <P>(A) <E T="03">Health-related statement</E> means any statement related to health (other than the warning statement required by § 16.21 of this chapter) and includes <PRTPAGE P="70"/>statements of a curative or therapeutic nature that, expressly or by implication, suggest a relationship between the consumption of alcohol, distilled spirits, or any substance found within the distilled spirits, and health benefits or effects on health. The term includes both specific health claims and general references to alleged health benefits or effects on health associated with the consumption of alcohol, distilled spirits, or any substance found within the distilled spirits, as well as health-related directional statements. The term also includes statements and claims that imply that a physical or psychological sensation results from consuming the distilled spirits, as well as statements and claims of nutritional value (<E T="03">e.g.,</E> statements of vitamin content). Statements concerning caloric, carbohydrate, protein, and fat content do not constitute nutritional claims about the product.</P>
          <P>(B) <E T="03">Specific health claim</E> is a type of health-related statement that, expressly or by implication, characterizes the relationship of the distilled spirits, alcohol, or any substance found within the distilled spirits, to a disease or health-related condition. Implied specific health claims include statements, symbols, vignettes, or other forms of communication that suggest, within the context in which they are presented, that a relationship exists between distilled spirits, alcohol, or any substance found within the distilled spirits, and a disease or health-related condition.</P>
          <P>(C) <E T="03">Health-related directional statement</E> is a type of health-related statement that directs or refers consumers to a third party or other source for information regarding the effects on health of distilled spirits or alcohol consumption.</P>
          <P>(ii) <E T="03">Rules for labeling</E>—(A) <E T="03">Health-related statements.</E> In general, labels may not contain any health-related statement that is untrue in any particular or tends to create a misleading impression as to the effects on health of alcohol consumption. TTB will evaluate such statements on a case-by-case basis and may require as part of the health-related statement a disclaimer or some other qualifying statement to dispel any misleading impression conveyed by the health-related statement.</P>
          <P>(B) <E T="03">Specific health claims.</E> (<E T="03">1</E>) TTB will consult with the Food and Drug Administration (FDA), as needed, on the use of a specific health claim on a distilled spirits label. If FDA determines that the use of such a labeling claim is a drug claim that is not in compliance with the requirements of the Federal Food, Drug, and Cosmetic Act, TTB will not approve the use of that specific health claim on a distilled spirits label.</P>
          <P>(<E T="03">2</E>) TTB will approve the use of a specific health claim on a distilled spirits label only if the claim is truthful and adequately substantiated by scientific or medical evidence; sufficiently detailed and qualified with respect to the categories of individuals to whom the claim applies; adequately discloses the health risks associated with both moderate and heavier levels of alcohol consumption; and outlines the categories of individuals for whom any levels of alcohol consumption may cause health risks. This information must appear as part of the specific health claim.</P>
          <P>(C) <E T="03">Health-related directional statements.</E> A statement that directs consumers to a third party or other source for information regarding the effects on health of distilled spirits or alcohol consumption is presumed misleading unless it—</P>
          <P>(<E T="03">1</E>) Directs consumers in a neutral or other non-misleading manner to a third party or other source for balanced information regarding the effects on health of distilled spirits or alcohol consumption; and</P>
          <P>(<E T="03">2</E>)(<E T="03">i</E>) Includes as part of the health-related directional statement the following disclaimer: “This statement should not encourage you to drink or to increase your alcohol consumption for health reasons;” or</P>
          <P>(<E T="03">ii</E>) Includes as part of the health-related directional statement some other qualifying statement that the appropriate TTB officer finds is sufficient to <PRTPAGE P="71"/>dispel any misleading impression conveyed by the health-related directional statement.</P>
          <SECAUTH>(26 U.S.C. 7805 (68A Stat. 917, as amended); 27 U.S.C. 205 (49 Stat. 981, as amended))</SECAUTH>
          <CITA>[T.D. 7020, 34 FR 20637, Dec. 30, 1969, as amended by T.D. ATF-62, 44 FR 71621, Dec. 11, 1979; T.D. ATF-180, 49 FR 31673, Aug. 8, 1984; 49 FR 35768. Sept. 12, 1984; T.D. ATF-198, 50 FR 8464, Mar. 1, 1985; 50 FR 23410, June 4, 1985; TTB T.D.-1, 68 FR 10104, Mar. 3, 2003]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart E—Standards of Fill for Bottled Distilled Spirits</HD>
        <SECTION>
          <SECTNO>§ 5.45</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>No person engaged in business as a distiller, rectifier, importer, wholesaler, or warehouseman and bottler, directly or indirectly, or through an affiliate, shall sell or ship or deliver for sale or shipment, or otherwise introduce in interstate or foreign commerce, or receive therein or remove from customs custody any distilled spirits in bottles unless such distilled spirits are bottled and packed in conformity with §§ 5.46 through 5.47a.</P>
          <SECAUTH>(Sec. 5, 49 Stat. 981, as amended (27 U.S.C. 205); 26 U.S.C. 5301)</SECAUTH>
          <CITA>[T.D. ATF-25, 41 FR 10221, Mar. 10, 1976; T.D. ATF-146, 48 FR 43321, Sept. 23, 1983]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.46</SECTNO>
          <SUBJECT>Standard liquor bottles.</SUBJECT>
          <P>(a) <E T="03">General.</E> A standard liquor bottle shall be one so made and formed, and so filled, as not to mislead the purchaser. An individual carton or other container of a bottle shall not be so designed as to mislead purchasers as to the size of the bottles.</P>
          <P>(b) <E T="03">Headspace.</E> A liquor bottle of a capacity of 200 milliliters or more shall be held to be so filled as to mislead the purchaser if it has a headspace in excess of 8 percent of the total capacity of the bottle after closure.</P>
          <P>(c) <E T="03">Design.</E> A liquor bottle shall be held (irrespective of the correctness of the stated net contents) to be so made and formed as to mislead the purchaser, if its actual capacity is substantially less than the capacity it appears to have upon visual examination under ordinary conditions of purchase or use.</P>
          <P>(d) <E T="03">Exceptions</E>—(1) <E T="03">Distinctive liquor bottles.</E> The headspace and design requirements in paragraphs (b) and (c) of this section do not apply to liquor bottles that are specifically exempted by the appropriate TTB officer, pursuant to an application filed by the bottler or importer.</P>
          <P>(2) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial and revocation of distinctive liquor bottle approvals, as well as appeal procedures, see part 13 of this chapter.</P>
          <SECAUTH>(Sec. 5, 49 Stat. 981, as amended (27 U.S.C. 205); 26 U.S.C. 5301)</SECAUTH>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-25, 41 FR 10221, Mar. 10, 1976; 41 FR 11022, Mar. 16, 1976; T.D. ATF-62, 44 FR 71622, Dec. 11, 1979; T.D. ATF-146, 48 FR 43321, Sept. 23, 1983; T.D. ATF-406, 64 FR 2129, Jan. 13, 1999]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.47</SECTNO>
          <SUBJECT>Standards of fill (distilled spirits bottled before January 1, 1980).</SUBJECT>
          <P>(a) <E T="03">Authorized standards of fill.</E> The standards of fill for all distilled spirits, whether domestically bottled, or imported, subject to the tolerances allowed in this section, shall be as follows:</P>
          <GPOTABLE CDEF="xl50,r50" COLS="2" OPTS="L0">
            <ROW>
              <ENT I="01">1 gallon.</ENT>
              <ENT>
                <FR>4/5</FR> pint.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">
                <FR>1/2</FR> gallon.</ENT>
              <ENT>
                <FR>1/2</FR> pint.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">1 quart.</ENT>
              <ENT>
                <FR>1/8</FR> pint.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">
                <FR>4/5</FR> quart.</ENT>
              <ENT>
                <FR>1/10</FR> pint.</ENT>
            </ROW>
            <ROW>
              <ENT I="01">1 pint.</ENT>
              <ENT>
                <FR>1/16</FR> pint (brandy only).</ENT>
            </ROW>
          </GPOTABLE>
          <P>(b) <E T="03">Tolerances.</E> The following tolerances shall be allowed:</P>
          <P>(1) Discrepancies due to errors in measuring which occur in filling conducted in compliance with good commercial practice.</P>

          <P>(2) Discrepancies due to differences in the capacity of bottles, resulting solely from unavoidable difficulties in manufacturing such bottles to a uniform capacity: <E T="03">Provided,</E> That no greater tolerance shall be allowed in case of bottles which, because of their design, cannot be made of approximately uniform capacity than is allowed in case of bottles which can be manufactured so as to be of approximately uniform capacity.</P>

          <P>(3) Discrepancies in measure due to differences in atmospheric conditions in various places and which unavoidably result from the ordinary and customary exposure of alcoholic beverages in bottles to evaporation. The reasonableness of discrepancies under this paragraph shall be determined on the facts in each case.<PRTPAGE P="72"/>
          </P>
          <P>(c) <E T="03">Unreasonable shortages.</E> Unreasonable shortages in certain of the bottles in any shipment shall not be compensated by overages in other bottles in the same shipment.</P>
          <P>(d) <E T="03">Limitations.</E> This section does not apply after December 31, 1979.</P>
          <SECAUTH>(Sec. 5, 49 Stat. 981, as amended (27 U.S.C. 205); 26 U.S.C. 5301)</SECAUTH>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-25, 41 FR 10221, Mar. 10, 1976; T.D. ATF-146, 48 FR 43321, Sept. 23, 1983]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.47a</SECTNO>
          <SUBJECT>Metric standards of fill (distilled spirits bottled after December 31, 1979).</SUBJECT>
          <P>(a) <E T="03">Authorized standards of fill.</E> The standards of fill for distilled spirits are the following:</P>

          <P>(1) For containers other than cans described in paragraph (a)(2), of this section—
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">1.75 liters</FP>
            <FP SOURCE="FP-1">1.00 liter</FP>
            <FP SOURCE="FP-1">750 milliliters</FP>
            <FP SOURCE="FP-1">500 milliliters (Authorized for bottling until June 30, 1989)</FP>
            <FP SOURCE="FP-1">375 milliliters</FP>
            <FP SOURCE="FP-1">200 milliliters</FP>
            <FP SOURCE="FP-1">100 milliliters</FP>
            <FP SOURCE="FP-1">50 milliliters</FP>
          </EXTRACT>
          

          <P>(2) For metal containers which have the general shape and design of a can, which have a closure which is an integral part of the container, and which cannot be readily reclosed after opening—
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">355 milliliters</FP>
            <FP SOURCE="FP-1">200 milliliters</FP>
            <FP SOURCE="FP-1">100 milliliters</FP>
            <FP SOURCE="FP-1">50 milliliters</FP>
          </EXTRACT>
          
          <P>(b) <E T="03">Tolerances.</E> The following tolerances shall be allowed:</P>
          <P>(1) Discrepancies due to errors in measuring which occur in filling conducted in compliance with good commercial practice.</P>

          <P>(2) Discrepancies due to differences in the capacity of bottles, resulting solely from unavoidable difficulties in manufacturing such bottles to a uniform capacity: <E T="03">Provided,</E> That no greater tolerance shall be allowed in case of bottles which, because of their design, cannot be made of approximately uniform capacity than is allowed in case of bottles which can be manufactured so as to be of approximately uniform capacity.</P>
          <P>(3) Discrepancies in measure due to differences in atmospheric conditions in various places and which unavoidably result from the ordinary and customary exposure of alcoholic beverages in bottles to evaporation. The reasonableness of discrepancies under this paragraph shall be determined on the facts in each case.</P>
          <P>(c) <E T="03">Unreasonable shortages.</E> Unreasonable shortages in certain of the bottles in any shipment shall not be compensated by overages in other bottles in the same shipment.</P>
          <P>(d) <E T="03">Distilled spirits bottled before January 1, 1980.</E> Distilled spirits bottled domestically before January 1, 1980, may be marketed after December 31, 1979, if such distilled spirits were bottled in accordance with § 5.47. (See § 5.53 for similar provisions relating to distilled spirits imported in original containers.)</P>
          <SECAUTH>(Sec. 5, 49 Stat. 981, as amended (27 U.S.C. 203); 26 U.S.C. 5301)</SECAUTH>
          <CITA>[T.D. ATF-25, 41 FR 10221, Mar. 10, 1976, as amended at 41 FR 11022, Mar. 16, 1976; 41 FR 11497, Mar. 19, 1976; T.D. ATF-35, 41 FR 46859, Oct. 26, 1976; T.D. ATF-62, 44 FR 71622, Dec. 11, 1979; T.D. ATF-146, 48 FR 43321, Sept. 23, 1983; T.D. ATF-228, 51 FR 16170, May 1, 1986; T.D. ATF-326, 57 FR 31128, July 14, 1992]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart F—Requirements for Withdrawal From Customs Custody of Bottled Imported Distilled Spirits</HD>
        <SECTION>
          <SECTNO>§ 5.51</SECTNO>
          <SUBJECT>Label approval and release.</SUBJECT>
          <P>(a) <E T="03">Certificate of label approval.</E> Bottled distilled spirits shall not be released from Customs custody for consumption unless there is deposited with the appropriate Customs officer at the port of entry the original or a photostatic copy of an approved certificate of label approval, TTB Form 5100.31.</P>
          <P>(b) <E T="03">Release.</E> If the original or photostatic copy of TTB Form 5100.31 has been approved, the brand or lot of distilled spirits bearing labels identical with those shown thereon may be released from U.S. Customs custody.</P>
          <P>(c) <E T="03">Relabeling.</E> Imported distilled spirits in U.S. Customs custody which are not labeled in conformity with certificates of label approval issued by the <PRTPAGE P="73"/>appropriate TTB officer must be relabeled prior to release under the supervision of the Customs officers of the port at which the spirits are located.</P>
          <P>(d) <E T="03">Statements of process.</E> TTB Forms 5100.31 covering labels for gin bearing the word “distilled” as a part of the designation shall be accompanied by a statement prepared by the manufacturer, setting forth a step-by-step description of the manufacturing process.</P>
          <P>(e) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial, and revocation of certificates of label approval, as well as appeal procedures, see part 13 of this chapter.</P>
          <CITA>[T.D. ATF-66, 45 FR 40549, June 13, 1980, as amended by T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-242, 51 FR 39525, Oct. 29, 1986; T.D. ATF-359, 59 FR 42160, Aug. 17, 1994; T.D. ATF-406, 64 FR 2129, Jan. 13, 1999]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.52</SECTNO>
          <SUBJECT>Certificates of age and origin.</SUBJECT>
          <P>(a) <E T="03">Scotch, Irish, and Canadian whiskies.</E> Scotch, Irish, and Canadian whiskies, imported in bottles, shall not be released from customs custody for consumption unless the invoice is accompanied by a certificate of origin issued by a duly authorized official of the British, Irish, or Canadian Government, certifying (1) that the particular distilled spirits are Scotch, Irish, or Canadian whisky, as the case may be, (2) that the distilled spirits have been manufactured in compliance with the laws of the respective foreign governments regulating the manufacture of whisky for home consumption, and (3) that the product conforms to the requirements of the Immature Spirits Act of such foreign governments for spirits intended for home consumption. In addition, a duly authorized official of the appropriate foreign government must certify to the age of the youngest distilled spirits in the bottle. The age certified shall be the period during which, after distillation and before bottling, the distilled spirits have been stored in oak containers.</P>
          <P>(b) <E T="03">Brandy, Cognac, and rum.</E> Brandy (other than fruit brandies of a type not customarily stored in oak containers) or Cognac, imported in bottles, shall not be released from customs custody for consumption unless accompanied by a certificate issued by a duly authorized official of the appropriate foreign country certifying that the age of the youngest brandy or Cognac in the bottle is not less than 2 years, or if age is stated on the label that none of the distilled spirits are of an age less than that stated. If the label of any rum, imported in bottles, contains any statement of age, the rum shall not be released from customs custody for consumption unless accompanied by a certificate issued by a duly authorized official of the appropriate foreign country, certifying to the age of the youngest rum in the bottle. The age certified shall be the period during which, after distillation and before bottling, the distilled spirits have been stored in oak containers. If the label of any fruit brandy, not stored in oak containers, bears any statement of storage in other type containers, the brandy must be accompanied by a certificate issued by a duly authorized official of the appropriate foreign government certifying to such storage. Cognac, imported in bottles, shall not be released from customs custody for consumption unless the invoice is accompanied by a certificate issued by a duly authorized official of the French Government, certifying that the product is grape brandy distilled in the Cognac region of France and entitled to be designated as “Cognac” by the laws and regulations of the French Government.</P>
          <P>(c) <E T="03">Tequila.</E> (1) Tequila, imported in bottles, shall not be released from customs custody for consumption unless a certificate of a duly authorized official of the Mexican Government that the product is entitled to be designated as Tequila under the applicable laws and regulations of the Mexican Government is filed with the application for release.</P>

          <P>(2) If the label of any Tequila imported in bottles, contains any statement of age, the Tequila shall not be released from customs custody for consumption unless a certificate of a duly authorized official of the Mexican Government as to the age of the youngest Tequila in the bottle is filed with the application for release. The age certified shall be the period during which the Tequila has been stored in oak containers after distillation and before bottling.<PRTPAGE P="74"/>
          </P>
          <P>(d) <E T="03">Other whiskies.</E> Whisky, as defined in § 5.22(b) (1), (4), (5), and (6), imported in bottles, shall not be released from customs custody for consumption unless accompanied by a certificate issued by a duly authorized official of the appropriate foreign government certifying:</P>
          <P>(1) In the case of whisky, whether or not mixed or blended but containing no neutral spirits, (i) the class and type thereof, (ii) the American proof at which produced, (iii) that no neutral spirits (or other whisky in the case of straight whisky) has been added as a part thereof or included therein, whether or not for the purpose of replacing outage, (iv) the age of the whisky, and (v) the type of oak container in which such age was acquired (whether new or reused; also whether charred or uncharred);</P>
          <P>(2) In the case of whisky containing neutral spirits, (i) the class and type thereof, (ii) the percentage of straight whisky, if any, used in the blend, (iii) the American proof at which the straight whisky was produced, (iv) the percentage of other whisky, if any, in the blend, (v) the percentage of neutral spirits in the blend, and the name of the commodity from which distilled, (vi) the age of the straight whisky and the age of the other whisky in the blend, and (vii) the type of oak containers in which such age or ages were acquired (whether new or reused; also whether charred or uncharred).</P>
          <P>(e) <E T="03">Miscellaneous.</E> Distilled spirits (other than Scotch, Irish, and Canadian whiskies, and Cognac) in bottles shall not be released from customs custody for consumption unless the invoice is accompanied by a certificate of origin issued by a duly authorized official of the appropriate foreign government, if the issuance of such certificates with respect to such distilled spirits has been authorized by the foreign government concerned, certifying as to the identity of the distilled spirits and that the distilled spirits have been manufactured in compliance with the laws of the respective foreign government regulating the manufacture of such distilled spirits for home consumption.</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-7, 38 FR 33471, Dec. 5, 1973]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.53</SECTNO>
          <SUBJECT>Certificate of nonstandard fill.</SUBJECT>
          <P>(a) Distilled spirits imported in original containers not conforming to the metric standards of fill prescribed in § 5.47a shall not be released from Customs custody after December 31, 1979:</P>
          <P>(1) Unless the distilled spirits are accompanied by a statement signed by a duly authorized official of the appropriate foreign country, stating that the distilled spirits were bottled or packed prior to January 1, 1980; or</P>
          <P>(2) Unless the distilled spirits are being withdrawn from a Customs bonded warehouse or foreign trade zone into which entered on or before December 31, 1979.</P>
          <P>(b) Distilled spirits imported in 500 ml containers shall not be released from Customs custody after June 30, 1989:</P>
          <P>(1) Unless the distilled spirits are accompanied by a certificate issued by the government of the appropriate foreign country, stating that the distilled spirits were bottled or packed prior to July 1, 1989; or</P>
          <P>(2) Unless the distilled spirits are being withdrawn from a Customs bonded warehouse or foreign trade zone into which entered on or before June 30, 1989.</P>
          <CITA>[T.D. ATF-25, 41 FR 10222, Mar. 10, 1976, as amended by T.D. ATF-228, 51 FR 16170, May 1, 1986]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart G—Requirements for Approval of Labels of Domestically Bottled Distilled Spirits</HD>
        <SECTION>
          <SECTNO>§ 5.55</SECTNO>
          <SUBJECT>Certificates of label approval.</SUBJECT>
          <P>(a) <E T="03">Requirement.</E> Distilled spirits shall not be bottled or removed from a plant, except as provided in paragraph (b) of this section, unless the proprietor possesses a certificate of label approval, TTB Form 5100.31, covering the labels on the bottle, issued by the appropriate TTB officer pursuant to application on such form. Application for certificates of label approval covering labels for imported gin bearing the word “distilled” as a part of the designation shall be accompanied by a statement prepared by the manufacturer setting forth a step-by-step description of the manufacturing process.<PRTPAGE P="75"/>
          </P>
          <P>(b) <E T="03">Exemption.</E> Any bottler of distilled spirits shall be exempt from the requirements in paragraph (a) of this section and § 5.56 if the bottler possesses a certificate of exemption from label approval, TTB Form 5100.31, issued by the appropriate TTB officer pursuant to application on that Form showing that the distilled spirits to be bottled are not to be sold, offered for sale, or shipped or delivered for shipment, or otherwise introduced into interstate or foreign commerce.</P>
          <P>(c) <E T="03">Miscellaneous.</E> Photoprints or other reproductions of certificates of label approval, or certificates of exemption are not acceptable as substitutes for an original or duplicate original (issued, on request, by the appropriate TTB officer) of a certificate. The original or duplicate original of such certificates shall, on demand, be exhibited to an authorized officer of the U.S. Government.</P>
          <P>(d) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial, and revocation of certificates of label approval and certificates of exemption from label approval, as well as appeal procedures, see part 13 of this chapter.</P>
          <CITA>[T.D. ATF-66, 45 FR 40550, June 13, 1980, as amended by T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-242, 51 FR 39525, Oct. 29, 1986; T.D. ATF-406, 64 FR 2129, Jan. 13, 1999]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.56</SECTNO>
          <SUBJECT>Certificates of age and origin.</SUBJECT>
          <P>Distilled spirits imported in bulk for bottling in the United States shall not be removed from the plant where bottled unless the bottler possesses certificates of age and certificates of origin applicable to such spirits which are similar to the certificates required by § 5.52 for like distilled spirits imported in bottles.</P>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart H—Advertising of Distilled Spirits</HD>
        <SECTION>
          <SECTNO>§ 5.61</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>No person engaged in business as a distiller, rectifier, importer, wholesaler, or warehouseman and bottler of distilled spirits, directly or indirectly or through an affiliate, shall publish or disseminate or cause to be published or disseminated by radio or television broadcast, or in any newspaper, periodical, or any publication, by any sign or outdoor advertisement, or any other printed or graphic matter, any advertisement of distilled spirits, if such advertising is in, or is calculated to induce sales in, interstate or foreign commerce, or is disseminated by mail, unless such advertisement is in conformity with §§ 5.61 through 5.66 of this part. Provided, that such sections shall not apply to outdoor advertising in place on (effective date of this treasury decision), but shall apply upon replacement, restoration, or renovation of any such advertising; and provided further, that such sections shall not apply to a retailer or the publisher of any newspaper, periodical, or other publication, or radio or television broadcast, unless such retailer or publisher or radio or television broadcaster is engaged in business as a distiller, rectifier, importer, wholesaler, or warehouseman and bottler of distilled spirits, directly or indirectly, or through an affiliate.</P>
          <CITA>[T.D. ATF-180, 49 FR 31673, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.62</SECTNO>
          <SUBJECT>Definition.</SUBJECT>
          <P>As used in §§ 5.61 through 5.66 of this part, the term “advertisement” includes any written or verbal statement, illlustration, or depiction which is in, or calculated to induce sales in, interstate or foreign commerce, or is disseminated by mail, whether it appears in a newspaper, magazine, trade booklet, menu, wine card, leaflet, circular, mailer, book insert, catalog, promotional material, sales pamphlet, or in any written, printed, graphic, or other matter accompanying the bottle, representations made on cases or in any billboard, sign, other outdoor display, public transit card, other periodical literature, publication, or in a radio or television broadcast, or in any other media; except that such term shall not include:</P>
          <P>(a) Any label affixed to any bottle of distilled spirits; or any individual covering, carton, or other container of the bottle which constitute a part of the labeling under §§ 5.31 through 5.42 of this part.</P>
          <P>(b) Any editorial or other reading material (<E T="03">i.e.,</E> news release) in any periodical or publication or newspaper for the publication of which no money or <PRTPAGE P="76"/>valuable consideration is paid or promised, directly or indirectly, by any permittee, and which is not written by or at the direction of the permittee.</P>
          <CITA>[T.D. ATF-180, 49 FR 31673, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.63</SECTNO>
          <SUBJECT>Mandatory statements.</SUBJECT>
          <P>(a) <E T="03">Responsible advertiser.</E> The advertisement shall state the name and address of the permittee responsible for its publication or broadcast. Street number and name may be omitted in the address.</P>
          <P>(b) <E T="03">Class and type.</E> The advertisement shall contain a conspicuous statement of the class to which the product belongs and the type thereof corresponding with the statement of class and type which is required to appear on the label of the product.</P>
          <P>(c) <E T="03">Alcohol content</E>—(1) <E T="03">Mandatory statement.</E> The alcohol content for distilled spirits shall be stated in percent-alcohol-by-volume. Products such as “Rock and Rye” or similar products containing a significant amount of solid material shall state the alcohol content at the time of bottling as follows: “Bottled at ___ percent-alcohol-by-volume.”</P>
          <P>(2) <E T="03">Optional statement.</E> In addition, the advertisement may also state the alcohol content in degrees of proof if this information appears in direct conjunction (i.e. with no intervening material) with the statement expressed in percent-alcohol-by-volume. If both forms of alcohol content are shown, the optional statement in degrees of proof shall be placed in parentheses, in brackets, or otherwise distinguished from the mandatory statement in percent-alcohol-by-volume to emphasize the fact that both expressions of alcohol content mean the same thing.</P>
          <P>(d) <E T="03">Percentage of neutral spirits and name of commodity.</E> (1) In the case of distilled spirits (other than cordials, liqueurs, and specialties) produced by blending or rectification, if neutral spirits have been used in the production thereof, there shall be stated the percentage of neutral spirits so used and the name of the commodity from which such neutral spirits have been distilled. The statement of percentage and the name of the commodity shall be made in substantially the following form: “__% neutral spirits distilled from ____ (insert grain, cane products, or fruit, as appropriate)”; or __% neutral spirits (vodka) distilled from ____ (insert grain, cane product, or fruit, as appropriate)”; or “__% grain (cane products), (fruit) neutral spirits”; or “__% grain spirits”.</P>
          <P>(2) In the case of neutral spirits or of gin produced by a process of continuous distillation, there shall be stated the name of the commodity from which such neutral spirits or gin has been distilled. The statement of the name of the commodity shall be made in substantially the following form: “Distilled from grain”, or “Distilled from cane products”, or “Distilled from fruit.”</P>
          <P>(e) <E T="03">Exception.</E> (1) If an advertisement refers to a general distilled spirits line or all of the distilled spirits products of one company, whether by the company name or by the brand name common to all the distilled spirits in the line, the only mandatory information necessary is the name and address of the responsible advertiser. This exception does not apply where only one type of distilled spirits is marketed under the specific brand name advertised.</P>
          <P>(2) On consumer specialty items, the only information necessary is the company name or brand name of the product.</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-180, 49 FR 31674, Aug. 8, 1984; T.D. ATF-237, 51 FR 36394, Oct. 10, 1986]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.64</SECTNO>
          <SUBJECT>Legibility of mandatory information.</SUBJECT>
          <P>(a) Statements required under §§ 5.61 through 5.66 of this part to appear in any written, printed, or graphic advertisement shall be in lettering or type size sufficient to be conspicuous and readily legible.</P>
          <P>(b) In the case of signs, billboards, and displays the name and address of the permittee responsible for the advertisement may appear in type size of lettering smaller than the other mandatory information, provided such information can be ascertained upon closer examination of the sign or billboard.</P>

          <P>(c) Mandatory information shall be so stated as to be clearly a part of the <PRTPAGE P="77"/>advertisement and shall not be separated in any manner from the remainder of the advertisement.</P>
          <P>(d) Manadatory information for two or more products shall not be stated unless clearly separated.</P>
          <P>(e) Mandatory information shall be so stated in both the print and audio-visual media that it will be readily apparent to the persons viewing the advertisement.</P>
          <CITA>[T.D. ATF-180, 49 FR 31674, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.65</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <P>(a) <E T="03">Restrictions.</E> An advertisement of distilled spirits shall not contain:</P>
          <P>(1) Any statement that is false or untrue in any material particular, or that, irrespective of falsity, directly, or by ambiguity, omission, or inference, or by the addition of irrelevant, scientific or technical matter tends to create a misleading impression.</P>
          <P>(2) Any statement that is disparaging of a competitor's product.</P>
          <P>(3) Any statement, design, device, or representation which is obscene or indecent.</P>
          <P>(4) Any statement, design, device, or representation of or relating to analyses, standards or tests, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer.</P>
          <P>(5) Any statement, design, device, or representation of or relating to any guarantee, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer. Money-back guarantees are not prohibited.</P>
          <P>(6) Any statement that the distilled spirits are distilled, blended, made, bottled, or sold under or in accordance with any municipal, State, Federal, or foreign authorization, law, or regulation, unless such statement appears in the manner authorized by § 5.42 for labels of distilled spirits. If a municipal, State or Federal permit number is stated, such permit number shall not be accompanied by any additional statement relating thereto.</P>
          <P>(7) The words “bond”, “bonded”, “bottled in bond”, “aged in bond”, or phrases containing these or synonymous terms, unless such words or phrases appear, pursuant to § 5.42, on labels of the distilled spirits advertised, and are stated in the advertisement in the manner and form in which they are permitted to appear on the label.</P>
          <P>(8) The word “pure” unless:</P>
          <P>(i) It refers to a particular ingredient used in the production of the distilled spirits, and is a truthful representation about the ingredient; or</P>
          <P>(ii) It is part of the bona fide name of a permittee or retailer from whom the distilled spirits are bottled; or</P>
          <P>(iii) It is part of the bona fide name of the permittee who bottled the distilled spirits.</P>
          <P>(9) The words “double distilled” or “triple distilled” or any similar terms unless it is a truthful statement of fact; except that “double distilled” or “triple distilled” shall not be permitted in advertisements of distilled spirits produced by the redistillation method when a second or third distillation step is a necessary distillation process for the production of the product.</P>
          <P>(b) <E T="03">Statements inconsistent with labeling.</E> (1) Advertisements shall not contain any statement concerning a brand or lot of distilled spirits that is inconsistent with any statement on the labeling thereof.</P>
          <P>(2) Any label depicted on a bottle in an advertisement shall be a reproduction of an approved label.</P>
          <P>(c) <E T="03">Statement of age.</E> The advertisement shall not contain any statement, design, or device directly or by implication concerning age or maturity of any brand or lot of distilled spirits unless a statement of age appears on the label of the advertised product. When any such statement, design, or device concerning age or maturity is contained in any advertisement, it shall include (in direct conjunction therewith and with substantially equal conspicuousness) all parts of the statement, if any, concerning age and percentages required to be made on the label under the provisions of §§ 5.31 through 5.42. An advertisement for any whisky or brandy (except immature brandies) which is not required to bear a statement of age on the label or an advertisement for any rum or Tequila, which has been aged for not less than 4 years may, however, contain inconspicuous, general representation as to <PRTPAGE P="78"/>age, maturity or other similar representations even though a specific age statement does not appear on the label of the advertised product and in the advertisement itself.</P>
          <P>(d) <E T="03">Health-related statements</E>—(1) <E T="03">Definitions.</E> When used in this paragraph (d), terms are defined as follows:</P>
          <P>(i) <E T="03">Health-related statement</E> means any statement related to health and includes statements of a curative or therapeutic nature that, expressly or by implication, suggest a relationship between the consumption of alcohol, distilled spirits, or any substance found within the distilled spirits, and health benefits or effects on health. The term includes both specific health claims and general references to alleged health benefits or effects on health associated with the consumption of alcohol, distilled spirits, or any substance found within the distilled spirits, as well as health-related directional statements. The term also includes statements and claims that imply that a physical or psychological sensation results from consuming the distilled spirits, as well as statements and claims of nutritional value (<E T="03">e.g.,</E> statements of vitamin content). Statements concerning caloric, carbohydrate, protein, and fat content do not constitute nutritional claims about the product.</P>
          <P>(ii) <E T="03">Specific health claim</E> is a type of health-related statement that, expressly or by implication, characterizes the relationship of the distilled spirits, alcohol, or any substance found within the distilled spirits, to a disease or health-related condition. Implied specific health claims include statements, symbols, vignettes, or other forms of communication that suggest, within the context in which they are presented, that a relationship exists between distilled spirits, alcohol, or any substance found within the distilled spirits, and a disease or health-related condition.</P>
          <P>(iii) <E T="03">Health-related directional statement</E> is a type of health-related statement that directs or refers consumers to a third party or other source for information regarding the effects on health of distilled spirits or alcohol consumption.</P>
          <P>(2) <E T="03">Rules for advertising</E>—(i) <E T="03">Health-related statements.</E> In general, advertisements may not contain any health-related statement that is untrue in any particular or tends to create a misleading impression as to the effects on health of alcohol consumption. TTB will evaluate such statements on a case-by-case basis and may require as part of the health-related statement a disclaimer or some other qualifying statement to dispel any misleading impression conveyed by the health-related statement. Such disclaimer or other qualifying statement must appear as prominent as the health-related statement.</P>
          <P>(ii) <E T="03">Specific health claims.</E> A specific health claim will not be considered misleading if it is truthful and adequately substantiated by scientific or medical evidence; sufficiently detailed and qualified with respect to the categories of individuals to whom the claim applies; adequately discloses the health risks associated with both moderate and heavier levels of alcohol consumption; and outlines the categories of individuals for whom any levels of alcohol consumption may cause health risks. This information must appear as part of the specific health claim and in a manner as prominent as the specific health claim.</P>
          <P>(iii) <E T="03">Health-related directional statements.</E> A statement that directs consumers to a third party or other source for information regarding the effects on health of distilled spirits or alcohol consumption is presumed misleading unless it—</P>
          <P>(A) Directs consumers in a neutral or other non-misleading manner to a third party or other source for balanced information regarding the effects on health of distilled spirits or alcohol consumption; and</P>
          <P>(B)(<E T="03">1</E>) Includes as part of the health-related directional statement, and in a manner as prominent as the health-related directional statement, the following disclaimer: “This statement should not encourage you to drink or increase your alcohol consumption for health reasons;” or</P>
          <P>(<E T="03">2</E>) Includes as part of the health-related directional statement, and in a manner as prominent as the health-related directional statement, some other qualifying statement that the appropriate TTB officer finds is sufficient <PRTPAGE P="79"/>to dispel any misleading impression conveyed by the health-related directional statement.</P>
          <P>(e) <E T="03">Place of origin.</E> The advertisement shall not represent that the distilled spirits were manufactured in or imported from a place or country other than that of their actual origin, or were produced or processed by one who was not in fact the actual producer or processor.</P>
          <P>(f) <E T="03">Confusion of brands.</E> Two or more different brands or lots of distilled spirits shall not be advertised in one advertisement (or in two or more advertisements in one issue of a periodical or newspaper, or in one piece of other written, printed, or graphic matter) if the advertisement tends to create the impression that representations made as to one brand or lot apply to the other or others, and if as to such latter the representations contravene any provisions of this subpart or are in any respect untrue.</P>
          <P>(g) <E T="03">Flags, seals, coats of arms, crests, and other insignia.</E> An advertisement shall not contain any statement, design, device, or pictorial representation which the appropriate TTB officer finds relates to, or is capable of being construed as relating to the armed forces of the United States, or the American flag, or any emblem, seal, insignia, or decoration associated with such flag or armed forces; nor shall any advertisement contain any statement, design, device, or pictorial representation of or concerning any flag, seal, coat of arms, crest, or other insignia, likely to mislead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of the government, organization, family, or individual with whom such flag, seal, coat of arms, crest, or insignia is associated.</P>
          <P>(h) <E T="03">Deceptive advertising techniques.</E> Subliminal or similar techniques are prohibited. “Subliminal or similar techniques,” as used in this part, refers to any device or technique that is used to convey, or attempts to convey, a message to a person by means of images or sounds of a very brief nature that cannot be perceived at a normal level of awareness.</P>
          <CITA>[T.D. 7020, 34 FR 20337, Dec. 30, 1969, as amended by T.D. ATF-180, 49 FR 31674, Aug. 8, 1984; TTB T.D.-1, 68 FR 10105, Mar. 3, 2003]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 5.66</SECTNO>
          <SUBJECT>Comparative advertising.</SUBJECT>
          <P>(a) <E T="03">General.</E> Comparative advertising shall not be disparaging of a competitor's product.</P>
          <P>(b) <E T="03">Taste tests.</E> (1) Taste test results may be used in advertisements comparing competitors' products unless they are disparaging, deceptive, or likely to mislead the consumer.</P>

          <P>(2) The taste test procedure used shall meet scientifically accepted procedures. An example of a scientifically accepted procedure is outlined in the <E T="03">Manual on Sensory Testing Methods,</E> ASTM Special Technical Publication 434, published by the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103, ASTM, 1968, Library of Congress Catalog Card Number 68-15545.</P>
          <P>(3) A statement shall appear in the advertisement providing the name and address of the testing administrator.</P>
          <CITA>[T.D. ATF-180, 49 FR 31674, Aug. 8, 1984]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart I—Use of the Term “Organic.”</HD>
        <SECTION>
          <SECTNO>§ 5.71</SECTNO>
          <SUBJECT>Use of the term “organic.”</SUBJECT>
          <P>(a) Use of the term “organic” is optional and is treated as “additional information on labels” under § 5.33(f).</P>
          <P>(b) Any use of the term “organic” on a distilled spirits label or in advertising of distilled spirits must comply with the United States Department of Agriculture's (USDA) National Organic Program rules, 7 CFR part 205, as interpreted by the USDA.</P>
          <P>(c) This section applies to labels and advertising that use the term “organic” on and after October 21, 2002.</P>
          <CITA>[T.D. ATF-483, 67 FR 62858, Oct. 8, 2002]</CITA>
        </SECTION>
      </SUBPART>
    </PART>
    <PART>
      <EAR>Pt. 6</EAR>
      <HD SOURCE="HED">PART 6—“TIED-HOUSE”</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—Scope of Regulations</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>6.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>6.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <SECTNO>6.3</SECTNO>
          <SUBJECT>Application.<PRTPAGE P="80"/>
          </SUBJECT>
          <SECTNO>6.4</SECTNO>
          <SUBJECT>Jurisdictional limits.</SUBJECT>
          <SECTNO>6.5</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>
          <SECTNO>6.6</SECTNO>
          <SUBJECT>Administrative provisions.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>6.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Unlawful Inducements</HD>
          <SUBJGRP>
            <HD SOURCE="HED">General</HD>
            <SECTNO>6.21</SECTNO>
            <SUBJECT>Application.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Interest in Retail License</HD>
            <SECTNO>6.25</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>6.26</SECTNO>
            <SUBJECT>Indirect interest.</SUBJECT>
            <SECTNO>6.27</SECTNO>
            <SUBJECT>Proprietary interest.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Interest in Retail Property</HD>
            <SECTNO>6.31</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>6.32</SECTNO>
            <SUBJECT>Indirect interest.</SUBJECT>
            <SECTNO>6.33</SECTNO>
            <SUBJECT>Proprietary interest.</SUBJECT>
            <SECTNO>6.34</SECTNO>
            <SUBJECT>Mortgages.</SUBJECT>
            <SECTNO>6.35</SECTNO>
            <SUBJECT>Renting display space.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Furnishing Things of Value</HD>
            <SECTNO>6.41</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>6.42</SECTNO>
            <SUBJECT>Indirect inducement through third party arrangements.</SUBJECT>
            <SECTNO>6.43</SECTNO>
            <SUBJECT>Sale of equipment.</SUBJECT>
            <SECTNO>6.44</SECTNO>
            <SUBJECT>Free warehousing.</SUBJECT>
            <SECTNO>6.45</SECTNO>
            <SUBJECT>Assistance in acquiring license.</SUBJECT>
            <SECTNO>6.46-6.47</SECTNO>
            <SUBJECT>[Reserved]</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Paying for Advertising, Display or Distribution Service</HD>
            <SECTNO>6.51</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>6.52</SECTNO>
            <SUBJECT>Cooperative advertising.</SUBJECT>
            <SECTNO>6.53</SECTNO>
            <SUBJECT>Advertising in ballparks, racetracks, and stadiums.</SUBJECT>
            <SECTNO>6.54</SECTNO>
            <SUBJECT>Advertising in retailer publications.</SUBJECT>
            <SECTNO>6.55</SECTNO>
            <SUBJECT>Display service.</SUBJECT>
            <SECTNO>6.56</SECTNO>
            <SUBJECT>Renting display space.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Guaranteeing Loans</HD>
            <SECTNO>6.61</SECTNO>
            <SUBJECT>Guaranteeing loans.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Extension of Credit</HD>
            <SECTNO>6.65</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <SECTNO>6.66</SECTNO>
            <SUBJECT>Calculation of period.</SUBJECT>
            <SECTNO>6.67</SECTNO>
            <SUBJECT>Sales to retailer whose account is in arrears.</SUBJECT>
          </SUBJGRP>
          <SUBJGRP>
            <HD SOURCE="HED">Quota Sales</HD>
            <SECTNO>6.71</SECTNO>
            <SUBJECT>Quota sales.</SUBJECT>
            <SECTNO>6.72</SECTNO>
            <SUBJECT>“Tie-in” sales.</SUBJECT>
          </SUBJGRP>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart D—Exceptions</HD>
          <SECTNO>6.81</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>6.82</SECTNO>
          <SUBJECT>[Reserved]</SUBJECT>
          <SECTNO>6.83</SECTNO>
          <SUBJECT>Product displays.</SUBJECT>
          <SECTNO>6.84</SECTNO>
          <SUBJECT>Point of sale advertising materials and consumer advertising specialties.</SUBJECT>
          <SECTNO>6.85</SECTNO>
          <SUBJECT>Temporary retailers.</SUBJECT>
          <SECTNO>6.86-6.87</SECTNO>
          <SUBJECT>[Reserved]</SUBJECT>
          <SECTNO>6.88</SECTNO>
          <SUBJECT>Equipment and supplies.</SUBJECT>
          <SECTNO>6.89-6.90</SECTNO>
          <SUBJECT>[Reserved]</SUBJECT>
          <SECTNO>6.91</SECTNO>
          <SUBJECT>Samples.</SUBJECT>
          <SECTNO>6.92</SECTNO>
          <SUBJECT>Newspaper cuts.</SUBJECT>
          <SECTNO>6.93</SECTNO>
          <SUBJECT>Combination packaging.</SUBJECT>
          <SECTNO>6.94</SECTNO>
          <SUBJECT>Educational seminars.</SUBJECT>
          <SECTNO>6.95</SECTNO>
          <SUBJECT>Consumer tasting or sampling at retail establishments.</SUBJECT>
          <SECTNO>6.96</SECTNO>
          <SUBJECT>Consumer promotions.</SUBJECT>
          <SECTNO>6.97</SECTNO>
          <SUBJECT>[Reserved]</SUBJECT>
          <SECTNO>6.98</SECTNO>
          <SUBJECT>Advertising service.</SUBJECT>
          <SECTNO>6.99</SECTNO>
          <SUBJECT>Stocking, rotation, and pricing service.</SUBJECT>
          <SECTNO>6.100</SECTNO>
          <SUBJECT>Participation in retailer association activities.</SUBJECT>
          <SECTNO>6.101</SECTNO>
          <SUBJECT>Merchandise.</SUBJECT>
          <SECTNO>6.102</SECTNO>
          <SUBJECT>Outside signs.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart E—Exclusion</HD>
          <SECTNO>6.151</SECTNO>
          <SUBJECT>Exclusion, in general.</SUBJECT>
          <SECTNO>6.152</SECTNO>
          <SUBJECT>Practices which put retailer independence at risk.</SUBJECT>
          <SECTNO>6.153</SECTNO>
          <SUBJECT>Criteria for determining retailer independence.</SUBJECT>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>15 U.S.C. 49-50; 27 U.S.C. 202 and 205; 44 U.S.C. 3504(h).</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, unless otherwise noted.</P>
      </SOURCE>
      <SUBPART>
        <HD SOURCE="HED">Subpart A—Scope of Regulations</HD>
        <SECTION>
          <SECTNO>§ 6.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>The regulations in this part, issued pursuant to section 105 of the Federal Alcohol Administration Act (27 U.S.C. 205), specify practices that are means to induce under section 105(b) of the Act, criteria for determining whether a practice is a violation of section 105(b) of the Act, and exceptions to section 105(b) of the Act. This part does not attempt to enumerate all of the practices that may result in a violation of section 105(b) of the Act. Nothing in this part shall operate to exempt any person from the requirements of any State law or regulation.</P>
          <CITA>[T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <P>This part applies to the several States of the United States, the District of Columbia, and Puerto Rico.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.3</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>(a) <E T="03">General.</E> This part applies only to transactions between industry members and retailers. It does not apply to transactions between two industry <PRTPAGE P="81"/>members (for example, between a producer and a wholesaler), or to transactions between an industry member and a retailer wholly owned by that industry member.</P>
          <P>(b) <E T="03">Transaction involving State agencies.</E> The regulations in this part apply only to transactions between industry members and State agencies operating as retailers as defined in this part. The regulations do not apply to State agencies with regard to their wholesale dealings with retailers.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.4</SECTNO>
          <SUBJECT>Jurisdictional limits.</SUBJECT>
          <P>(a) <E T="03">General.</E> The regulations in this part apply where:</P>
          <P>(1) The industry member induces a retailer to purchase distilled spirits, wine, or malt beverages from such industry member to the exclusion in whole or in part of products sold or offered for sale by other persons in interstate or foreign commerce; and</P>
          <P>(2) If: (i) The inducement is made in the course of interstate or foreign commerce; or</P>
          <P>(ii) The industry member engages in the practice of using an inducement to such an extent as substantially to restrain or prevent transactions in interstate or foreign commerce in any such products; or</P>
          <P>(iii) The direct effect of the inducement is to prevent, deter, hinder or restrict other persons from selling or offering for sale any such products to such retailer in interstate or foreign commerce.</P>
          <P>(b) <E T="03">Malt beverages.</E> In the case of malt beverages, this part applies to transactions between a retailer in any State and a brewer, importer, or wholesaler of malt beverages inside or outside such State only to the extent that the law of such State imposes requirements similar to the requirements of section 105(b) of the Federal Alcohol Administration Act (27 U.S.C. 205(b)), with respect to similar transactions between a retailer in such State and a brewer, importer, or wholesaler or malt beverage in such State, as the case may be.</P>
          <CITA>[T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.5</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>

          <P>Most of the regulatory authorities of the Administrator contained in this part are delegated to appropriate TTB officers. These TTB officers are specified in TTB Order 1135.6, Delegation of the Administrator's Authorities in 27 CFR Part 6, <E T="03">Tied-House</E>. You may obtain a copy of this order by accessing the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. TTB-44, 71 FR 16922, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.6</SECTNO>
          <SUBJECT>Administrative provisions.</SUBJECT>
          <P>(a) <E T="03">General.</E> The Act makes applicable the provisions including penalties of sections 49 and 50 of Title 15, United States Code, to the jurisdiction, powers and duties of the Administrator under this Act, and to any person (whether or not a corporation) subject to the provisions of law administered by the Administrator under this Act. The Act also provides that the Administrator is authorized to require, in such manner and such form as he or she shall prescribe, such reports as are necessary to carry out the powers and duties under this chapter.</P>
          <P>(b) <E T="03">Examination and subpoena.</E> Any appropriate TTB officer shall at all reasonable times have access to, for the purpose of examination, and the right to copy any documentary evidence of any person, partnership, or corporation being investigated or proceeded against. An appropriate TTB officer shall also have the power to require by subpoena the attendance and testimony of witnesses and the production of all such documentary evidence relating to any matter under investigation, upon a satisfactory showing the requested evidence may reasonably be expected to yield information relevant to any matter being investigated under the Act.</P>
          <P>(c) <E T="03">Reports required by the appropriate TTB officer</E>—(1) <E T="03">General.</E> The appropriate TTB officer may, as part of a trade practice investigation of an industry member, require such industry member to submit a written report <PRTPAGE P="82"/>containing information on sponsorships, advertisements, promotions, and other activities pertaining to its business subject to the Act conducted by, or on behalf of, or benefiting the industry member.</P>
          <P>(2) <E T="03">Preparation.</E> The report will be prepared by the industry member in letter form, executed under the penalties of perjury, and will contain the information specified by the appropriate TTB officer. The period covered by the report will not exceed three years.</P>
          <P>(3) <E T="03">Filing.</E> The report will be filed in accordance with the instructions of the appropriate TTB officer.</P>
          <APPRO>(Approved by the Office of Management and Budget under control number 1512-0392)</APPRO>
          <CITA>[T.D. ATF-364, 60 FR 20421, Apr. 26, 1995. Redesignated and amended by T.D. ATF-428, 65 FR 52019, Aug. 28, 2000]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 6.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>As used in this part, unless the context otherwise requires, terms have the meanings given in this section. Any other term defined in the Federal Alcohol Administration Act and used in this part shall have the meaning assigned to it by that Act.</P>
          <P>
            <E T="03">Act.</E> The Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">Appropriate TTB officer.</E> An officer or employee of the Alcohol and Tobacco Tax and Trade Bureau (TTB) authorized to perform any functions relating to the administration or enforcement of this part by TTB Order 1135.6, Delegation of the Administrator's Authorities in 27 CFR Part 6, <E T="03">Tied-House</E>.</P>
          <P>
            <E T="03">Brand.</E> For purposes of administering this part, the term “brand” refers to differences in the brand name of a product or in the nature of a product. Examples of different brands are products having a different brand name or class, type, or kind designation; appellation of origin (wine); vintage date (wine); age (distilled spirits); or percentage of alcohol. Differences in packaging such as difference in label design or color, or a different style, type or size of container are not considered different brands.</P>
          <P>
            <E T="03">Equipment.</E> All functional items such as tap boxes, glassware, pouring racks, and similar items used in the conduct of a retailer's business.</P>
          <P>
            <E T="03">Industry member.</E> Any person engaged in business as a distiller, brewer, rectifier, blender, or other producer, or as an importer or wholesaler, of distilled spirits, wine or malt beverages, or as a bottler, or warehousemen and bottler, of distilled spirits; industry member does not include an agency of a State or political subdivision thereof, or an officer or employee of such agency.</P>
          <P>
            <E T="03">Product.</E> Distilled spirits, wine or malt beverages, as defined in the Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Retail establishment.</E> Any premises where distilled spirits, wine or malt beverages are sold or offered for sale to consumers, whether for consumption on or off the premises where sold.</P>
          <P>
            <E T="03">Retailer.</E> Any person engaged in the sale of distilled spirits, wine or malt beverages to consumers. A wholesaler who makes incidental retail sales representing less than five percent of the wholesaler's total sales volume for the preceding two-month period shall not be considered a retailer with respect to such incidental sales.</P>
          <CITA>[T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20421, Apr. 26, 1995; T.D. ATF-428, 65 FR 52020, Aug. 28, 2000; T.D. TTB-44, 71 FR 16922, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Unlawful Inducements</HD>
        <SUBJGRP>
          <HD SOURCE="HED">General</HD>
          <SECTION>
            <SECTNO>§ 6.21</SECTNO>
            <SUBJECT>Application.</SUBJECT>
            <P>Except as provided in subpart D, it is unlawful for any industry member to induce, directly or indirectly, any retailer to purchase any products from the industry member to the exclusion, in whole or in part, of such products sold or offered for sale by other persons in interstate or foreign commerce by any of the following means:</P>

            <P>(a) By acquiring or holding (after the expiration of any license held at the time the FAA Act was enacted) any interest in any license with respect to the premises of the retailer;<PRTPAGE P="83"/>
            </P>
            <P>(b) By acquiring any interest in the real or personal property owned, occupied, or used by the retailer in the conduct of his business;</P>
            <P>(c) By furnishing, giving, renting, lending, or selling to the retailer, any equipment, fixtures, signs, supplies, money, services or other thing of value, subject to the exceptions contained in subpart D;</P>
            <P>(d) By paying or crediting the retailer for any advertising, display, or distribution service;</P>
            <P>(e) By guaranteeing any loan or the repayment of any financial obligation of the retailer;</P>
            <P>(f) By extending to the retailer credit for a period in excess of the credit period usual and customary to the industry for the particular class of transactions as prescribed in § 6.65; or</P>
            <P>(g) By requiring the retailer to take and dispose of a certain quota of any such products.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Interest in Retail License</HD>
          <SECTION>
            <SECTNO>§ 6.25</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>The act by an industry member of acquiring or holding any interest in any license (State, county or municipal) with respect to the premises of a retailer constitutes a means to induce within the meaning of the Act.</P>
            <CITA>[T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.26</SECTNO>
            <SUBJECT>Indirect interest.</SUBJECT>
            <P>Industry member interest in retail licenses includes any interest acquired by corporate officials, partners, employees or other representatives of the industry member. Any interest in a retail license acquired by a separate corporation in which the industry member or its officials, hold ownership or are otherwise affiliated, is an interest in a retail license.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.27</SECTNO>
            <SUBJECT>Proprietary interest.</SUBJECT>
            <P>(a) <E T="03">Complete ownership.</E> Outright ownership of a retail business by an industry member is not an interest which may result in a violation of section 105(b)(1) of the Act.</P>
            <P>(b) <E T="03">Partial ownership.</E> Less than complete ownership of a retail business by an industry member constitutes an interest in a retail license within the meaning of the Act.</P>
            <CITA>[T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Interest in Retail Property</HD>
          <SECTION>
            <SECTNO>§ 6.31</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>The act by an industry member of acquiring an interest in real or personal property owned, occupied, or used by the retailer in the conduct of business constitutes a means to induce within the meaning of the Act.</P>
            <CITA>[T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.32</SECTNO>
            <SUBJECT>Indirect interest.</SUBJECT>
            <P>Industry member interest in retail property includes any interest acquired by corporate officials, partners, employees or other representatives of the industry member. Any interest in retail property acquired by a separate corporation in which the industry member or its officials, hold ownership or are otherwise affiliated, is an interest in retail property.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.33</SECTNO>
            <SUBJECT>Proprietary interest.</SUBJECT>
            <P>(a) <E T="03">Complete ownership.</E> Outright ownership of a retail business by an industry member is not an interest that may result in a violation of section 105(b)(2) of the Act.</P>
            <P>(b) <E T="03">Partial ownership.</E> Less than complete ownership of a retail business by an industry member constitutes an interest in retail property within the meaning of the Act.</P>
            <CITA>[ T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.34</SECTNO>
            <SUBJECT>Mortgages.</SUBJECT>
            <P>The acquisition of a mortgage on a retailer's real or personal property by an industry member constitutes an interest in the retailer's property within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.35</SECTNO>
            <SUBJECT>Renting display space.</SUBJECT>
            <P>The renting of display space by an industry member at a retail establishment constitutes an interest in the retailer's property within the meaning of the Act.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <PRTPAGE P="84"/>
          <HD SOURCE="HED">Furnishing Things of Value</HD>
          <SECTION>
            <SECTNO>§ 6.41</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>Subject to the exceptions listed in subpart D, the act by an industry member of furnishing, giving, renting, lending, or selling any equipment, fixtures, signs, supplies, money, services, or other things of value to a retailer constitutes a means to induce within the meaning of the Act.</P>
            <CITA>[T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.42</SECTNO>
            <SUBJECT>Indirect inducement through third party arrangements.</SUBJECT>
            <P>(a) <E T="03">General.</E> The furnishing, giving, renting, lending, or selling of equipment, fixtures, signs, supplies, money, services, or other thing of value by an industry member to a third party, where the benefits resulting from such things of value flow to individual retailers, is the indirect furnishing of a thing of value within the meaning of the Act. Indirect furnishing of a thing of value includes, but is not limited to, making payments for advertising to a retailer association or a display company where the resulting benefits flow to individual retailers.</P>
            <P>(b) <E T="03">Exceptions.</E> An indirect inducement will not arise where the thing of value was furnished to a retailer by the third party without the knowledge or intent of the industry member, or the industry member did not reasonably foresee that the thing of value would have been furnished to a retailer. Things which may lawfully be furnished, given, rented, lent, or sold by industry members to retailers under subpart D may also be furnished directly by a third party to a retailer.</P>
            <CITA>[T.D. ATF-364, 60 FR 20421, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.43</SECTNO>
            <SUBJECT>Sale of equipment.</SUBJECT>
            <P>A transaction in which equipment is sold to a retailer by an industry member, except as provided in § 6.88, is the selling of equipment in within the meaning of the Act regardless of how sold. Further, the negotiation by an industry member of a special price to a retailer for equipment from an equipment company is the furnishing of a thing of value within the meaning of the Act.</P>
            <CITA>[T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.44</SECTNO>
            <SUBJECT>Free warehousing.</SUBJECT>
            <P>The furnishing of free warehousing by delaying delivery of distilled spirits, wine, or malt beverages beyond the time that payment for the product is received, or if a retailer is purchasing on credit, delaying final delivery of products beyond the close of the period of time for which credit is lawfully extended, is the furnishing of a service or thing of value within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.45</SECTNO>
            <SUBJECT>Assistance in acquiring license.</SUBJECT>
            <P>Any assistance (financial, legal, administrative or influential) given the retailer by an industry member in the retailer's acquisition of the retailer's license is the furnishing of a service or thing of value within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§§ 6.46-6.47</SECTNO>
            <RESERVED>[Reserved]</RESERVED>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Paying for Advertising, Display or Distribution Service</HD>
          <SECTION>
            <SECTNO>§ 6.51</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>The act by an industry member of paying or crediting a retailer for any advertising, display, or distribution service constitutes a means to induce within the meaning of the Act, whether or not the advertising, display, or distribution service received by the industry member in these instances is commensurate with the amount paid therefor. This includes payments or credits to retailers that are merely reimbursements, in full or in part, for such services purchased by a retailer from a third party.</P>
            <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.52</SECTNO>
            <SUBJECT>Cooperative advertising.</SUBJECT>
            <P>An arrangement in which an industry member participates with a retailer in paying for an advertisement placed by the retailer constitutes paying the retailer for advertising within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <PRTPAGE P="85"/>
            <SECTNO>§ 6.53</SECTNO>
            <SUBJECT>Advertising in ballparks, racetracks, and stadiums.</SUBJECT>
            <P>The purchase, by an industry member, of advertising on signs, scoreboards, programs, scorecards, and the like at ballparks, racetracks or stadiums, from the retail concessionaire constitutes paying the retailer for an advertising service within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.54</SECTNO>
            <SUBJECT>Advertising in retailer publications.</SUBJECT>
            <P>The purchase, by an industry member, of advertising in a retailer publication for distribution to consumers or the general public constitutes paying the retailer for advertising within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.55</SECTNO>
            <SUBJECT>Display service.</SUBJECT>
            <P>Industry member reimbursements to retailers for setting up product or other displays constitutes paying the retailer for rendering a display service within the meaning of the Act.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.56</SECTNO>
            <SUBJECT>Renting display space.</SUBJECT>
            <P>A promotion whereby an industry member rents display space at a retail establishment constitutes paying the retailer for rendering a display service within the meaning of the Act.</P>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Guaranteeing Loans</HD>
          <SECTION>
            <SECTNO>§ 6.61</SECTNO>
            <SUBJECT>Guaranteeing loans.</SUBJECT>
            <P>The act by an industry member of guaranteeing any loan or the repayment of any financial obligation of a retailer constitutes a means to induce within the meaning of the Act.</P>
            <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Extension of Credit</HD>
          <SECTION>
            <SECTNO>§ 6.65</SECTNO>
            <SUBJECT>General.</SUBJECT>
            <P>Extension of credit by an industry member to a retailer for a period of time in excess of 30 days from the date of delivery constitutes a means to induce within the meaning of the Act.</P>
            <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.66</SECTNO>
            <SUBJECT>Calculation of period.</SUBJECT>
            <P>For the purpose of this part, the period of credit is calculated as the time elapsing between the date of delivery of the product and the date of full legal discharge of the retailer, through the payment of cash or its equivalent, from all indebtedness arising from the transaction.</P>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.67</SECTNO>
            <SUBJECT>Sales to retailer whose account is in arrears.</SUBJECT>
            <P>An extension of credit (for product purchases) by an industry member to a retailer whose account is in arrears does not constitute a means to induce within the meaning of the Act so long as such retailer pays in advance or on delivery an amount equal to or greater than the value of each order, regardless of the manner in which the industry member applies the payment in its records.</P>
            <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
        </SUBJGRP>
        <SUBJGRP>
          <HD SOURCE="HED">Quota Sales</HD>
          <SECTION>
            <SECTNO>§ 6.71</SECTNO>
            <SUBJECT>Quota sales.</SUBJECT>
            <P>The act by an industry member of requiring a retailer to take and dispose of any quota of distilled spirits, wine, or malt beverages constitutes a means to induce within the meaning of the Act.</P>
            <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
          <SECTION>
            <SECTNO>§ 6.72</SECTNO>
            <SUBJECT>“Tie-in” sales.</SUBJECT>

            <P>The act by an industry member of requiring that a retailer purchase one product (as defined in § 6.11) in order to obtain another constitutes a means to induce within the meaning of the Act. This includes the requirement to take a minimum quantity of a product in standard packaging in order to obtain the same product in some type of premium package, i.e., a distinctive decanter, or wooden or tin box. This also includes combination sales if one or more products may be purchased only in combination with other products and not individually. However, an industry member is not precluded from selling two or more kinds or brands of products to a retailer at a special combination price, provided the retailer has the option of purchasing either product at the usual price, and the retailer is not required to purchase any product it does not want. See § 6.93 for <PRTPAGE P="86"/>combination packaging of products plus non-alcoholic items.</P>
            <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
          </SECTION>
        </SUBJGRP>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart D—Exceptions</HD>
        <SECTION>
          <SECTNO>§ 6.81</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>(a) <E T="03">Application.</E> Section 105(b)(3) of the Act enumerates means to induce that may be unlawful under the subsection, subject to such exceptions as are prescribed in regulations, having due regard for public health, the quantity and value of articles involved, established trade customs not contrary to the public interest, and the purposes of that section. This subpart implements section 105(b)(3) of the Act and identifies the practices that are exceptions to section 105(b)(3) of the Act. An industry member may furnish a retailer equipment, inside signs, supplies, services, or other things of value, under the conditions and within the limitations prescribed in this subpart.</P>
          <P>(b) <E T="03">Recordkeeping Requirements.</E> (1) Industry members shall keep and maintain records on the permit or brewery premises, for a three year period, of all items furnished to retailers under §§ 6.83, 6.88, 6.91, 6.96(a), and 6.100 and the commercial records required under § 6.101. Commercial records or invoices may be used to satisfy this recordkeeping requirement if all required information is shown. These records shall show:</P>
          <P>(i) The name and address of the retailer receiving the item;</P>
          <P>(ii) The date furnished;</P>
          <P>(iii) The item furnished;</P>
          <P>(iv) The industry member's cost of the item furnished (determined by the manufacturer's invoice price); and</P>
          <P>(v) Charges to the retailer for any item.</P>
          <P>(2) Although no separate recordkeeping violation results, an industry member who fails to keep such records is not eligible for the exception claimed.</P>
          <APPRO>(Approved by the Office of Management and Budget under control number 1512-0392)</APPRO>
          <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.82</SECTNO>
          <RESERVED>[Reserved]</RESERVED>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.83</SECTNO>
          <SUBJECT>Product displays.</SUBJECT>
          <P>(a) <E T="03">General.</E> The act by an industry member of giving or selling product displays to a retailer does not constitute a means to induce within the meaning of section 105(b)(3) of the Act provided that the conditions prescribed in paragraph (c) of this section are met.</P>
          <P>(b) <E T="03">Definition.</E> “Product display” means any wine racks, bins, barrels, casks, shelving, or similar items the primary function of which is to hold and display consumer products.</P>
          <P>(c) <E T="03">Conditions and limitations.</E> (1) The total value of all product displays given or sold by an industry member under paragraph (a) of this section may not exceed $300 per brand at any one time in any one retail establishment. Industry members may not pool or combine dollar limitations in order to provide a retailer a product display valued in excess of $300 per brand. The value of a product display is the actual cost to the industry member who initially purchased it. Transportation and installation costs are excluded.</P>
          <P>(2) All product displays must bear conspicuous and substantial advertising matter on the product or the industry member which is permanently inscribed or securely affixed. The name and address of the retailer may appear on the product displays.</P>
          <P>(3) The giving or selling of such product displays may be conditioned upon the purchase of the distilled spirits, wine, or malt beverages advertised on those displays in a quantity necessary for the initial completion of such display. No other condition can be imposed by the industry member on the retailer in order for the retailer to receive or obtain the product display.</P>
          <CITA>[T.D. ATF-364, 60 FR 20422, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.84</SECTNO>
          <SUBJECT>Point of sale advertising materials and consumer advertising specialties.</SUBJECT>
          <P>(a) <E T="03">General.</E> The act by an industry member of giving or selling point of sale advertising materials and consumer advertising specialties to a retailer does not constitute a means to induce within the meaning of section 105(b)(3) of the Act provided that the <PRTPAGE P="87"/>conditions prescribed in paragraph (c) of this section are met.</P>
          <P>(b) <E T="03">Definitions</E>—(1) <E T="03">Point of sale advertising materials</E> are items designed to be used within a retail establishment to attract consumer attention to the products of the industry member. Such materials include, but are not limited to: posters, placards, designs, inside signs (electric, mechanical or otherwise), window decorations, trays, coasters, mats, menu cards, meal checks, paper napkins, foam scrapers, back bar mats, thermometers, clocks, calendars, and alcoholic beverage lists or menus.</P>
          <P>(2) <E T="03">Consumer advertising specialties</E> are items that are designed to be carried away by the consumer, such as trading stamps, nonalcoholic mixers, pouring racks, ash trays, bottle or can openers, cork screws, shopping bags, matches, printed recipes, pamphlets, cards, leaflets, blotters, post cards, pencils, shirts, caps, and visors.</P>
          <P>(c) <E T="03">Conditions and limitations.</E> (1) All point of sale advertising materials and consumer advertising specialties must bear conspicuous and substantial advertising matter about the product or the industry member which is permanently inscribed or securely affixed. The name and address of the retailer may appear on the point of sale advertising materials.</P>
          <P>(2) The industry member may not directly or indirectly pay or credit the retailer for using or distributing these materials or for any expense incidental to their use.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.85</SECTNO>
          <SUBJECT>Temporary retailers.</SUBJECT>
          <P>(a) <E T="03">General.</E> The furnishing of things of value to a temporary retailer does not constitute a means to induce within the meaning of section 105(b)(3) of the Act.</P>
          <P>(b) <E T="03">Definition.</E> For purposes of administering this part, a temporary retailer is a dealer who is not engaged in business as a retailer for more than four consecutive days per event, and for not more than five events in a calendar year.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§§ 6.86-6.87</SECTNO>
          <RESERVED>[Reserved]</RESERVED>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.88</SECTNO>
          <SUBJECT>Equipment and supplies.</SUBJECT>
          <P>(a) <E T="03">General.</E> The act by an industry member of selling equipment or supplies to a retailer does not constitute a means to induce within the meaning of section 105(b)(3) of the Act if the equipment or supplies are sold at a price not less than the cost to the industry member who initially purchased them, and if the price is collected within 30 days of the date of the sale. The act by an industry member of installing dispensing accessories at the retailer's establishment does not constitute a means to induce within the meaning of the Act as long as the retailer bears the cost of initial installation. The act by an industry member of furnishing, giving, or selling coil cleaning service to a retailer of distilled spirits, wine, or malt beverages does not constitute a means to induce within the meaning of section 105(b)(3) of the Act.</P>
          <P>(b) <E T="03">Definition.</E> “Equipment and supplies” means glassware (or similar containers made of other material), dispensing accessories, carbon dioxide (and other gasses used in dispensing equipment) or ice. “Dispensing accessories” include items such as standards, faucets, cold plates, rods, vents, taps, tap standards, hoses, washers, couplings, gas gauges, vent tongues, shanks, and check valves.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§§ 6.89-6.90</SECTNO>
          <RESERVED>[Reserved]</RESERVED>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.91</SECTNO>
          <SUBJECT>Samples.</SUBJECT>

          <P>The act by an industry member of furnishing or giving a sample of distilled spirits, wine, or malt beverages to a retailer who has not purchased the brand from that industry member within the last 12 months does not constitute a means to induce within the meaning of section 105(b)(3) of the Act. For each retail establishment the industry member may give not more than 3 gallons of any brand of malt beverage, not more than 3 liters of any brand of wine, and not more than 3 liters of distilled spirits. If a particular product is not available in a size within <PRTPAGE P="88"/>the quantity limitations of this section, an industry member may furnish to a retailer the next larger size.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.92</SECTNO>
          <SUBJECT>Newspaper cuts.</SUBJECT>
          <P>Newspaper cuts, mats, or engraved blocks for use in retailers' advertisements may be given or sold by an industry member to a retailer selling the industry member's products.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.93</SECTNO>
          <SUBJECT>Combination packaging.</SUBJECT>
          <P>The act by an industry member of packaging and distributing distilled spirits, wine, or malt beverages in combination with other (non-alcoholic) items for sale to consumers does not constitute a means to induce within the meaning of section 105(b)(3) of the Act.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.94</SECTNO>
          <SUBJECT>Educational seminars.</SUBJECT>
          <P>An industry member may give or sponsor educational seminars for employees of retailers either at the industry member's premises or at the retail establishment. Examples would be seminars dealing with use of a retailer's equipment, training seminars for employees of retailers, or tours of industry member's plant premises. This section does not authorize an industry member to pay a retailer's expense in conjunction with an educational seminar (such as travel and lodging). This does not preclude providing nominal hospitality during the event.</P>
          <CITA>[T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.95</SECTNO>
          <SUBJECT>Consumer tasting or sampling at retail establishments.</SUBJECT>
          <P>An industry member may conduct tasting or sampling activities at a retail establishment. The industry member may purchase the products to be used from the retailer, but may not purchase them from the retailer for more than the ordinary retail price.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.96</SECTNO>
          <SUBJECT>Consumer promotions.</SUBJECT>
          <P>(a) <E T="03">Coupons.</E> The act by an industry member of furnishing to consumers coupons which are redeemable at a retail establishment does not constitute a means to induce within the meaning of section 105(b)(3) of the Act, provided the following conditions are met:</P>
          <P>(1) All retailers within the market where the coupon offer is made may redeem such coupons; and</P>
          <P>(2) An industry member may not reimburse a retailer for more than the face value of all coupons redeemed, plus a usual and customary handling fee for the redemption of coupons.</P>
          <P>(b) <E T="03">Direct offerings.</E> Contest prizes, premium offers, refunds, and like items may be offered by industry members directly to consumers. Officers, employees and representatives of wholesalers or retailers are excluded from particiption.</P>
          <CITA>[T.D. ATF-74, 45 FR 63251, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.97</SECTNO>
          <RESERVED>[Reserved]</RESERVED>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.98</SECTNO>
          <SUBJECT>Advertising service.</SUBJECT>
          <P>The listing of the names and addresses of two or more unaffiliated retailers selling the products of an industry member in an advertisement of that industry member does not constitute a means to induce within the meaning of section 105(b)(3) of the Act, provided:</P>
          <P>(a) The advertisement does not also contain the retail price of the product (except where the exclusive retailer in the jurisdiction is a State or a political subdivision of a State), and</P>
          <P>(b) The listing is the only reference to the retailers in the advertisement and is relatively inconspicuous in relation to the advertisement as a whole, and</P>
          <P>(c) The advertisement does not refer only to one retailer or only to retail establishments controlled directly or indirectly by the same retailer, except where the retailer is an agency of a State or a political subdivision of a State.</P>
          <CITA>[T.D. ATF-364, 60 FR 20423, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.99</SECTNO>
          <SUBJECT>Stocking, rotation, and pricing service.</SUBJECT>
          <P>(a) <E T="03">General.</E> Industry members may, at a retail establishment, stock, rotate and affix the price to distilled spirits, wine, or malt beverages which they <PRTPAGE P="89"/>sell, provided products of other industry members are not altered or disturbed. The rearranging or resetting of all or part of a store or liquor department is not hereby authorized.</P>
          <P>(b) <E T="03">Shelf plan and shelf schematics.</E> The act by an industry member of providing a recommended shelf plan or shelf schematic for distilled spirits, wine, or malt beverages does not constitute a means to induce within the meaning of section 105(b)(3) of the Act.</P>
          <CITA>[T.D. ATF-364, 60 FR 20424, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.100</SECTNO>
          <SUBJECT>Participation in retailer association activities.</SUBJECT>
          <P>The following acts by an industry member participating in retailer association activities do not constitute a means to induce within the meaning of section 105(b)(3) of the Act:</P>
          <P>(a) Displaying its products at a convention or trade show;</P>
          <P>(b) Renting display booth space if the rental fee is the same as paid by all exhibitors at the event;</P>
          <P>(c) Providing its own hospitality which is independent from association sponsored activities;</P>
          <P>(d) Purchasing tickets to functions and paying registration fees if the payments or fees are the same as paid by all attendees, participants or exhibitors at the event; and</P>
          <P>(e) Making payments for advertisements in programs or brochures issued by retailer associations at a convention or trade show if the total payments made by an industry member for all such advertisements do not exceed $300 per year for any retailer association.</P>
          <CITA>[T.D. ATF-364, 60 FR 20424, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.101</SECTNO>
          <SUBJECT>Merchandise.</SUBJECT>
          <P>(a) <E T="03">General.</E> The act by an industry member, who is also in business as a bona fide producer or vendor of other merchandise (for example, groceries or pharmaceuticals), of selling that merchandise to a retailer does not constitute a means to induce within the meaning of section 105(b)(3) of the Act, provided:</P>
          <P>(1) The merchandise is sold at its fair market value;</P>
          <P>(2) The merchandise is not sold in combination with distilled spirits, wines, or malt beverages (except as provided in § 6.93);</P>
          <P>(3) The industry member's acquisition or production costs of the merchandise appears on the industry member's purchase invoices or other records; and</P>
          <P>(4) The individual selling prices of merchandise and distilled spirits, wines, or malt beverages sold in a single transaction can be determined from commercial documents covering the sales transaction.</P>
          <P>(b) <E T="03">Things of value covered in other sections of this part.</E> The act by an industry member of providing equipment, fixtures, signs, glassware, supplies, services, and advertising specialties to retailers does not constitute a means to induce within the meaning of section 105(b)(3) of the Act only as provided in other sections within this part.</P>
          <CITA>[T.D. ATF-364, 60 FR 20424, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.102</SECTNO>
          <SUBJECT>Outside signs.</SUBJECT>
          <P>The act by an industry member of giving or selling outside signs to a retailer does not constitute a means to induce within the meaning of section 105(b)(3) of the Act provided that:</P>
          <P>(a) The sign must bear conspicuous and substantial advertising matter about the product or the industry member which is permanently inscribed or securely affixed;</P>
          <P>(b) The retailer is not compensated, directly or indirectly such as through a sign company, for displaying the signs; and</P>
          <P>(c) The cost of the signs may not exceed $400.</P>
          <CITA>[T.D. ATF-364, 60 FR 20424, Apr. 26, 1995]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart E—Exclusion</HD>
        <SOURCE>
          <HD SOURCE="HED">Source:</HD>
          <P>T.D. ATF-364, 60 FR 20424, Apr. 26, 1995, unless otherwise noted.</P>
        </SOURCE>
        <SECTION>
          <SECTNO>§ 6.151</SECTNO>
          <SUBJECT>Exclusion, in general.</SUBJECT>
          <P>(a) Exclusion, in whole or in part occurs:</P>

          <P>(1) When a practice by an industry member, whether direct, indirect, or through an affiliate, places (or has the potential to place) retailer independence at risk by means of a tie or link <PRTPAGE P="90"/>between the industry member and retailer or by any other means of industry member control over the retailer; and</P>
          <P>(2) Such practice results in the retailer purchasing less than it would have of a competitor's product.</P>
          <P>(b) Section 6.152 lists practices that create a tie or link that places retailer independence at risk. Section 6.153 lists the criteria used for determining whether other practices can put retailer independence at risk.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.152</SECTNO>
          <SUBJECT>Practices which put retailer independence at risk.</SUBJECT>
          <P>The practices specified in this section put retailer independence at risk. The practices specified here are examples and do not constitute a complete list of those practices that put retailer independence at risk.</P>
          <P>(a) The act by an industry member of resetting stock on a retailer's premises (other than stock offered for sale by the industry member).</P>

          <P>(b) The act by an industry member of purchasing or renting display, shelf, storage or warehouse space (<E T="03">i.e.</E> slotting allowance).</P>
          <P>(c) Ownership by an industry member of less than a 100 percent interest in a retailer, where such ownership is used to influence the purchases of the retailer.</P>
          <P>(d) The act by an industry member of requiring a retailer to purchase one alcoholic beverage product in order to be allowed to purchase another alcoholic beverage product at the same time.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 6.153</SECTNO>
          <SUBJECT>Criteria for determining retailer independence.</SUBJECT>
          <P>The criteria specified in this section are indications that a particular practice, other than those in § 6.152, places retailer independence at risk. A practice need not meet all of the criteria specified in this section in order to place retailer independence at risk.</P>
          <P>(a) The practice restricts or hampers the free economic choice of a retailer to decide which products to purchase or the quantity in which to purchase them for sale to consumers.</P>
          <P>(b) The industry member obligates the retailer to participate in the promotion to obtain the industry member's product.</P>
          <P>(c) The retailer has a continuing obligation to purchase or otherwise promote the industry member's product.</P>
          <P>(d) The retailer has a commitment not to terminate its relationship with the industry member with respect to purchase of the industry member's products.</P>
          <P>(e) The practice involves the industry member in the day-to-day operations of the retailer. For example, the industry member controls the retailer's decisions on which brand of products to purchase, the pricing of products, or the manner in which the products will be displayed on the retailer's premises.</P>
          <P>(f) The practice is discriminatory in that it is not offered to all retailers in the local market on the same terms without business reasons present to justify the difference in treatment.</P>
        </SECTION>
      </SUBPART>
    </PART>
    <PART>
      <EAR>Pt. 7</EAR>
      <HD SOURCE="HED">PART 7—LABELING AND ADVERTISING OF MALT BEVERAGES</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—Scope</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>7.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>7.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <SECTNO>7.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <SECTNO>7.4</SECTNO>
          <SUBJECT>Related regulations.</SUBJECT>
          <SECTNO>7.5</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>7.10</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <SECTNO>7.11</SECTNO>
          <SUBJECT>Use of ingredients containing alcohol in malt beverages; processing of malt beverages.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Labeling Requirements for Malt Beverages</HD>
          <SECTNO>7.20</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>7.21</SECTNO>
          <SUBJECT>Misbranding.</SUBJECT>
          <SECTNO>7.22</SECTNO>
          <SUBJECT>Mandatory label information.</SUBJECT>
          <SECTNO>7.22a</SECTNO>
          <SUBJECT>Voluntary disclosure of major food allergens.</SUBJECT>
          <SECTNO>7.22b</SECTNO>
          <SUBJECT>Petitions for exemption from major food allergen labeling.</SUBJECT>
          <SECTNO>7.23</SECTNO>
          <SUBJECT>Brand names.</SUBJECT>
          <SECTNO>7.24</SECTNO>
          <SUBJECT>Class and type.</SUBJECT>
          <SECTNO>7.25</SECTNO>
          <SUBJECT>Name and address.</SUBJECT>
          <SECTNO>7.26</SECTNO>
          <SUBJECT>Alcoholic content [suspended as of April 19, 1993; see § 7.71].</SUBJECT>
          <SECTNO>7.27</SECTNO>
          <SUBJECT>Net contents.</SUBJECT>
          <SECTNO>7.28</SECTNO>
          <SUBJECT>General requirements.<PRTPAGE P="91"/>
          </SUBJECT>
          <SECTNO>7.29</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart D—Requirements for Withdrawal of Imported Malt Beverages From Customs Custody</HD>
          <SECTNO>7.30</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>7.31</SECTNO>
          <SUBJECT>Label approval and release.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart E—Requirements for Approval of Labels of Malt Beverages Domestically Bottled or Packed</HD>
          <SECTNO>7.40</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>7.41</SECTNO>
          <SUBJECT>Certificates of label approval.</SUBJECT>
          <SECTNO>7.42</SECTNO>
          <SUBJECT>Exhibiting certificates to Government officials.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart F—Advertising of Malt Beverages</HD>
          <SECTNO>7.50</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>7.51</SECTNO>
          <SUBJECT>Definitions.</SUBJECT>
          <SECTNO>7.52</SECTNO>
          <SUBJECT>Mandatory statements.</SUBJECT>
          <SECTNO>7.53</SECTNO>
          <SUBJECT>Legibility of mandatory information.</SUBJECT>
          <SECTNO>7.54</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <SECTNO>7.55</SECTNO>
          <SUBJECT>Comparative advertising.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart G—General Provisions</HD>
          <SECTNO>7.60</SECTNO>
          <SUBJECT>Exports.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart H—Interim Regulations for Alcoholic Content Statements</HD>
          <SECTNO>7.71</SECTNO>
          <SUBJECT>Alcoholic content.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart I—Use of the Term “Organic.”</HD>
          <SECTNO>7.81</SECTNO>
          <SUBJECT>Use of the term “organic.”</SUBJECT>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>27 U.S.C. 205.</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. 6521, 25 FR 13859, Dec. 29, 1960, unless otherwise noted.</P>
      </SOURCE>
      <EDNOTE>
        <HD SOURCE="HED">Editorial Note:</HD>
        <P>Nomenclature changes to part 7 appear by T.D. ATF-425, 65 FR 11891, Mar. 7, 2000.</P>
      </EDNOTE>
      <SUBPART>
        <HD SOURCE="HED">Subpart A—Scope</HD>
        <SECTION>
          <SECTNO>§ 7.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>The regulations in this part relate to the labeling and advertising of malt beverages.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <P>This part applies to the several States of the United States, the District of Columbia and the Commonwealth of Puerto Rico.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.3</SECTNO>
          <SUBJECT>Forms prescribed.</SUBJECT>
          <P>(a) The appropriate TTB officer is authorized to prescribe all forms required by this part. All of the information called for in each form shall be furnished as indicated by the headings on the form and the instructions on or pertaining to the form. In addition, information called for in each form shall be furnished as required by this part. The form will be filed in accordance with the instructions for the form.</P>

          <P>(b) Forms prescribed by this part are available for printing through the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. ATF-92, 46 FR 46912, Sept. 23, 1981, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987; T.D. 372, 61 FR 20723, May 8, 1996; T.D. ATF-425, 65 FR 11891, Mar. 7, 2000; T.D. TTB-44, 71 FR 16922, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.4</SECTNO>
          <SUBJECT>Related regulations.</SUBJECT>
          <P>The following regulations also relate to this part:
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">27 CFR Part 205—National Organic Program</FP>
            <FP SOURCE="FP-1">27 CFR Part 1—Basic Permit Requirements Under the Federal Alcohol Administration Act, Nonindustrial Use of Distilled Spirits and Wine, Bulk Sales and Bottling of Distilled Spirits</FP>
            <FP SOURCE="FP-1">27 CFR Part 4—Labeling and Advertising of Wine</FP>
            <FP SOURCE="FP-1">27 CFR Part 5—Labeling and Advertising of Distilled Spirits</FP>
            <FP SOURCE="FP-1">27 CFR Part 13—Labeling Proceedings</FP>
            <FP SOURCE="FP-1">27 CFR Part 16—Alcoholic Beverage Health Warning Statement</FP>
            <FP SOURCE="FP-1">27 CFR Part 25—Beer</FP>
            <FP SOURCE="FP-1">27 CFR Part 26—Liquors and Articles from Puerto Rico and the Virgin Islands</FP>
            <FP SOURCE="FP-1">27 CFR Part 27—Importation of Distilled Spirits, Wines, and Beer</FP>
            <FP SOURCE="FP-1">27 CFR Part 71—Rules of Practice in Permit Proceedings</FP>
          </EXTRACT>
          <CITA>[T.D. ATF-483, 67 FR 62858, Oct. 8, 2002]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.5</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>

          <P>Most of the regulatory authorities of the Administrator contained in this part are delegated to appropriate TTB officers. These TTB officers are specified in TTB Order 1135.7, Delegation of the Administrator's Authorities in 27 CFR Part 7, Labeling and Advertising of Malt Beverages. You may obtain a copy of this order by accessing the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National <PRTPAGE P="92"/>Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. TTB-44, 71 FR 16922, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 7.10</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>As used in this part, unless the context otherwise requires, terms shall have the meaning ascribed in this subpart.</P>
          <P>
            <E T="03">Act.</E> The Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">Advertisement.</E> See § 7.51 for meaning of term as used in subpart F of this part.</P>
          <P>
            <E T="03">Appropriate TTB officer.</E> An officer or employee of the Alcohol and Tobacco Tax and Trade Bureau (TTB) authorized to perform any functions relating to the administration or enforcement of this part by TTB Order 1135.7, Delegation of the Administrator's Authorities in 27 CFR Part 7, Labeling and Advertising of Malt Beverages.</P>
          <P>
            <E T="03">Brand label.</E> The label carrying, in the usual distinctive design, the brand name of the malt beverage.</P>
          <P>
            <E T="03">Bottler.</E> Any person who places malt beverages in containers of a capacity of one gallon or less.</P>
          <P>
            <E T="03">Container.</E> Any can, bottle, barrel, keg, or other closed receptacle, irrespective of size or of the material from which made, for use for the sale of malt beverages at retail.</P>
          <P>
            <E T="03">Gallon.</E> A U.S. gallon of 231 cubic inches of malt beverages at 39.1 °F (4 °C). All other liquid measures used are subdivisions of the gallon as defined.</P>
          <P>
            <E T="03">Interstate or foreign commerce.</E> Commerce between any State and any place outside thereof, or commerce within any Territory or the District of Columbia, or between points within the same State but through any place outside thereof.</P>
          <P>
            <E T="03">Malt beverage.</E> A beverage made by the alcoholic fermentation of an infusion or decoction, or combination of both, in potable brewing water, of malted barley with hops, or their parts, or their products, and with or without other malted cereals, and with or without the addition of unmalted or prepared cereals, other carbohydrates or products prepared therefrom, and with or without the addition of carbon dioxide, and with or without other wholesome products suitable for human food consumption. Standards applying to the use of processing methods and flavors in malt beverage production appear in § 7.11.</P>
          <P>
            <E T="03">Other terms.</E> Any other term defined in the Federal Alcohol Administration Act and used in this part shall have the same meaning assigned to it by the Act.</P>
          <P>
            <E T="03">Packer.</E> Any person who places malt beverages in containers of a capacity in excess of one gallon.</P>
          <P>
            <E T="03">Person.</E> Any individual, partnership, joint-stock company, business trust, association, corporation, or other form of business enterprise, including a receiver trustee, or liquidating agent, and including an officer or employee of any agency of a State or political subdivision thereof.</P>
          <P>
            <E T="03">United States.</E> The several States, the District of Columbia, and Puerto Rico; the term “State” includes the District of Columbia and Puerto Rico.</P>
          <CITA>[T.D. ATF-48, 43 FR 13534, Mar. 31, 1978; 44 FR 55839, Sept. 28, 1979, as amended by T.D. ATF-66, 45 FR 40550, June 13, 1980; T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-344, 58 FR 40354, July 28, 1993; T.D. ATF-425, 65 FR 11892, Mar. 7, 2000; TTB T.D.-21, 70 FR 234, Jan. 3, 2005; T.D. TTB-44, 71 FR 16923, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.11</SECTNO>
          <SUBJECT>Use of ingredients containing alcohol in malt beverages; processing of malt beverages.</SUBJECT>
          <P>(a) <E T="03">Use of flavors and other nonbeverage ingredients containing alcohol</E>—</P>
          <P>(1) <E T="03">General.</E> Flavors and other nonbeverage ingredients containing alcohol may be used in producing a malt beverage. Except as provided in paragraph (a)(2) of this section, no more than 49% of the overall alcohol content of the finished product may be derived from the addition of flavors and other nonbeverage ingredients containing alcohol. For example, a finished malt beverage that contains 5.0% alcohol by volume must derive a minimum of 2.55% alcohol by volume from the fermentation of barley malt and other materials and may derive not more than 2.45% alcohol by volume from the <PRTPAGE P="93"/>addition of flavors and other nonbeverage ingredients containing alcohol.</P>
          <P>(2) In the case of malt beverages with an alcohol content of more than 6% by volume, no more than 1.5% of the volume of the malt beverage may consist of alcohol derived from added flavors and other nonbeverage ingredients containing alcohol.</P>
          <P>(b) <E T="03">Processing.</E> Malt beverages may be filtered or otherwise processed in order to remove color, taste, aroma, bitterness, or other characteristics derived from fermentation.</P>
          <CITA>[TTB T.D.-21, 70 FR 234, Jan. 3, 2005]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Labeling Requirements for Malt Beverages</HD>
        <SECTION>
          <SECTNO>§ 7.20</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>(a) <E T="03">Application.</E> This subpart shall apply to malt beverages sold or shipped or delivered for shipment, or otherwise introduced into or received in any State from any place outside thereof, only to the extent that the law of such State imposes similar requirements with respect to the labeling of malt beverages not sold or shipped or delivered for shipment or otherwise introduced into or received in such State from any place outside thereof.</P>
          <P>(b) <E T="03">Marking, branding, and labeling.</E> No person engaged in business as a brewer, wholesaler, or importer of malt beverages, directly or indirectly, or through an affiliate, shall sell or ship, or deliver for sale or shipment, or otherwise introduce in interstate or foreign commerce, or receive therein, or remove from Customs custody any malt beverages in containers unless the malt beverages are packaged, and the packages are marked, branded, and labeled in conformity with this subpart.</P>
          <P>(c) <E T="03">Alteration of labels.</E> (1) It shall be unlawful for any person to alter, mutilate, destroy, obliterate, or remove any mark, brand, or label upon malt beverages held for sale in interstate or foreign commerce or after shipment therein, except as authorized by Federal law. The appropriate TTB officer may, upon written application, permit additional labeling or relabeling of malt beverages in containers if, in his judgment, the facts show that the additional labeling or relabeling is for the purpose of compliance with the requirements of this subpart or of State law.</P>
          <P>(2) Application for permission to relabel shall be accompanied by two complete sets of the old labels and two complete sets of any proposed labels, together with a statement of the reasons for relabeling, the quantity and the location of the malt beverages, and the name and address of the person by whom they will be relabeled.</P>
          <CITA>[T.D. 6521, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF-66, 45 FR 40551, June 13, 1980; T.D. ATF-425, 65 FR 11892, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.21</SECTNO>
          <SUBJECT>Misbranding.</SUBJECT>
          <P>Malt beverages in containers shall be deemed to be misbranded:</P>
          <P>(a) If the container fails to bear on it a brand label (or a brand label and other permitted labels) containing the mandatory label information as required by §§ 7.20 through 7.29 and conforming to the general requirements specified in this part.</P>
          <P>(b) If the container, cap, or any label on the container, or any carton, case, or other covering of the container used for sale at retail, or any written, printed, graphic, or other matter accompanying the container to the consumer buyer contains any statement, design, device, or graphic, pictorial, or emblematic representation that is prohibited by §§ 7.20 through 7.29.</P>
          <P>(c) If the container has blown, branded, or burned therein the name or other distinguishing mark of any person engaged in business as a brewer, wholesaler, bottler, or importer, of malt beverages, or of any other person, except the person whose name is required to appear on the brand label.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.22</SECTNO>
          <SUBJECT>Mandatory label information.</SUBJECT>
          <P>There shall be stated:</P>
          <P>(a) On the brand label:</P>
          <P>(1) Brand name, in accordance with § 7.23.</P>
          <P>(2) Class, in accordance with § 7.24.</P>
          <P>(3) Name and address (except when branded or burned in the container) in accordance with § 7.25, except as provided in paragraph (b) of this section.</P>

          <P>(4) Net contents (except when blown, branded, or burned, in the container) in accordance with § 7.27.<PRTPAGE P="94"/>
          </P>
          <P>(5) Alcohol content in accordance with § 7.71, for malt beverages that contain any alcohol derived from added flavors or other added nonbeverage ingredients (other than hops extract) containing alcohol.</P>
          <P>(b) On the brand label or on a separate label (back or front):</P>
          <P>(1) In the case of imported malt beverages, name and address of importer in accordance with § 7.25.</P>
          <P>(2) In the case of malt beverages bottled or packed for the holder of a permit or a retailer, the name and address of the bottler or packer, in accordance with § 7.25.</P>
          <P>(3) Alcoholic content, when required by State law, in accordance with § 7.71.</P>
          <P>(4) A statement that the product contains FD&amp;C Yellow No. 5, where that coloring material is used in a product bottled on or after October 6, 1984.</P>
          <P>(5) [Reserved]</P>
          <P>(6) <E T="03">Declaration of sulfites.</E> The statement “Contains sulfites” or “Contains (a) sulfiting agent(s)” or a statement identifying the specific sulfiting agent where sulfur dioxide or a sulfiting agent is detected at a level of 10 or more parts per million, measured as total sulfur dioxide. The sulfite declaration may appear on a strip label or neck label in lieu of appearing on the front or back label. The provisions of this paragraph shall apply to:</P>
          <P>(i) Any certificate of label approval issued on or after January 9, 1987;</P>
          <P>(ii) Any malt beverage bottled on or after July 9, 1987, regardless of the date of issuance of the certificate of label approval; and,</P>
          <P>(iii) Any malt beverage removed on or after January 9, 1988.</P>

          <P>(7) Declaration of aspartame. The following statement, in capital letters, separate and apart from all other information, when the product contains aspartame in accordance with Food and Drug Administration (FDA) regulations:
          </P>
          <EXTRACT>
            <FP>“PHENYLKETONURICS: CONTAINS PHENYLALANINE.”</FP>
          </EXTRACT>
          <APPRO>(Paragraph (b)(6) approved by the Office of Management and Budget under Control No. 1512-0469)</APPRO>
          <CITA>[T.D. 6521, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-150, 48 FR 45557, Oct. 6, 1983; T.D. ATF-220, 50 FR 51852, Dec. 20, 1985; T.D. ATF-236, 51 FR 34710, Sept. 30, 1986; T.D. ATF-282, 54 FR 7162, Feb. 16, 1989; T.D. ATF-312, 56 FR 31077, July 9, 1991; T.D. ATF-339, 58 FR 21231, Apr. 19, 1993; T.D. ATF-347, 58 FR 44132, Aug. 19, 1993; T.D. TTB-12, 69 FR 33574, June 16, 2004; TTB T.D.-21, 70 FR 234, Jan. 3, 2005]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.22a</SECTNO>
          <SUBJECT>Voluntary disclosure of major food allergens.</SUBJECT>
          <P>(a) <E T="03">Definitions.</E> For purposes of this section the following terms have the meanings indicated.</P>
          <P>(1) <E T="03">Major food allergen.</E>
            <E T="03">Major food allergen</E> means any of the following:</P>
          <P>(i) Milk, egg, fish (for example, bass, flounder, or cod), Crustacean shellfish (for example, crab, lobster, or shrimp), tree nuts (for example, almonds, pecans, or walnuts), wheat, peanuts, and soybeans; or</P>
          <P>(ii) A food ingredient that contains protein derived from a food specified in paragraph (a)(1)(i) of this section, except:</P>
          <P>(A) Any highly refined oil derived from a food specified in paragraph (a)(1)(i) of this section and any ingredient derived from such highly refined oil; or</P>
          <P>(B) A food ingredient that is exempt from major food allergen labeling requirements pursuant to a petition for exemption approved by the Food and Drug Administration (FDA) under 21 U.S.C. 343(w)(6) or pursuant to a notice submitted to FDA under 21 U.S.C. 343(w)(7), provided that the food ingredient meets the terms or conditions, if any, specified for that exemption.</P>
          <P>(2) <E T="03">Name of the food source from which each major food allergen is derived.</E>
            <E T="03">Name of the food source from which each major food allergen is derived</E> means the name of the food as listed in paragraph (a)(1)(i) of this section, except that:</P>

          <P>(i) In the case of a tree nut, it means the name of the specific type of nut (for example, almonds, pecans, or walnuts); and<PRTPAGE P="95"/>
          </P>
          <P>(ii) In the case of Crustacean shellfish, it means the name of the species of Crustacean shellfish (for example, crab, lobster, or shrimp); and</P>
          <P>(iii) The names “egg” and “peanuts”, as well as the names of the different types of tree nuts, may be expressed in either the singular or plural form, and the name “soy”, “soybean”, or “soya” may be used instead of “soybeans”.</P>
          <P>(b) <E T="03">Voluntary labeling standards.</E> Major food allergens (defined in paragraph (a)(1) of this section) used in the production of a malt beverage product may, on a voluntary basis, be declared on any label affixed to the container. However, if any one major food allergen is voluntarily declared, all major food allergens used in production of the malt beverage product, including major food allergens used as fining or processing agents, must be declared, except when covered by a petition for exemption approved by the appropriate TTB officer under § 7.22b. The major food allergens declaration must consist of the word “Contains” followed by a colon and the name of the food source from which each major food allergen is derived (for example, “Contains: egg”).</P>
          <P>(c) <E T="03">Cross reference.</E> For mandatory labeling requirements applicable to malt beverage products containing FD&amp;C Yellow No. 5, sulfites, and aspartame, see §§ 7.22(b)(4), (b)(6), and (b)(7).</P>
          <CITA>[T.D. TTB-53, 71 FR 42269, July 26, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.22b</SECTNO>
          <SUBJECT>Petitions for exemption from major food allergen labeling.</SUBJECT>
          <P>(a) <E T="03">Submission of petition.</E> Any person may petition the appropriate TTB officer to exempt a particular product or class of products from the labeling requirements of § 7.22a. The burden is on the petitioner to provide scientific evidence (including the analytical method used to produce the evidence) that demonstrates that the finished product or class of products, as derived by the method specified in the petition, either:</P>
          <P>(1) Does not cause an allergic response that poses a risk to human health; or</P>
          <P>(2) Does not contain allergenic protein derived from one of the foods identified in § 7.22(a)(1)(i), even though a major food allergen was used in production.</P>
          <P>(b) <E T="03">Decision on petition.</E> TTB will approve or deny a petition for exemption submitted under paragraph (a) of this section in writing within 180 days of receipt of the petition. If TTB does not provide a written response to the petitioner within that 180-day period, the petition will be deemed denied, unless an extension of time for decision is mutually agreed upon by the appropriate TTB officer and the petitioner. TTB may confer with the Food and Drug Administration (FDA) on petitions for exemption, as appropriate and as FDA resources permit. TTB may require the submission of product samples and other additional information in support of a petition; however, unless required by TTB, the submission of samples or additional information by the petitioner after submission of the petition will be treated as the withdrawal of the initial petition and the submission of a new petition. An approval or denial under this section will constitute a final agency action.</P>
          <P>(c) <E T="03">Resubmission of a petition.</E> After a petition for exemption is denied under this section, the petitioner may resubmit the petition along with supporting materials for reconsideration at any time. TTB will treat this submission as a new petition.</P>
          <P>(d) <E T="03">Availability of information</E>—(1) <E T="03">General.</E> TTB will promptly post to its public Web site, <E T="03">http://www.ttb.gov,</E> all petitions received under this section as well as TTB's responses to those petitions. Any information submitted in support of the petition that is not posted to the TTB Web site will be available to the public pursuant to 5 U.S.C. 552, except where a request for confidential treatment is granted under paragraph (d)(2) of this section.</P>
          <P>(2) <E T="03">Requests for confidential treatment of business information.</E> A person who provides trade secrets or other commercial or financial information in connection with a petition for exemption under this section may request that TTB give confidential treatment to that information. A failure to request confidential treatment at the time the information in question is submitted to TTB will constitute a <PRTPAGE P="96"/>waiver of confidential treatment. A request for confidential treatment of information under this section must conform to the following standards:</P>
          <P>(i) The request must be in writing;</P>
          <P>(ii) The request must clearly identify the information to be kept confidential;</P>
          <P>(iii) The request must relate to information that constitutes trade secrets or other confidential commercial or financial information regarding the business transactions of an interested person, the disclosure of which would cause substantial harm to the competitive position of that person;</P>
          <P>(iv) The request must set forth the reasons why the information should not be disclosed, including the reasons the disclosure of the information would prejudice the competitive position of the interested person; and</P>
          <P>(v) The request must be supported by a signed statement by the interested person, or by an authorized officer or employee of that person, certifying that the information in question is a trade secret or other confidential commercial or financial information and that the information is not already in the public domain.</P>
          <CITA>[T.D. TTB-53, 71 FR 42269, July 26, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.23</SECTNO>
          <SUBJECT>Brand names.</SUBJECT>
          <P>(a) <E T="03">General.</E> The product shall bear a brand name, except that if not sold under a brand name, then the name of the person required to appear on the brand label shall be deemed a brand name for the purpose of this part.</P>
          <P>(b) <E T="03">Misleading brand names.</E> No label shall contain any brand name, which, standing alone, or in association with other printed or graphic matter, creates any impression or inference as to the age, origin, identity, or other characteristics of the product unless the appropriate TTB officer finds that such brand name, either when qualified by the word “brand” or when not so qualified, conveys no erroneous impressions as to the age, origin, identity, or other characteristics of the product.</P>
          <P>(c) <E T="03">Trade name of foreign origin.</E> This section shall not operate to prohibit the use by any person of any trade name or brand of foreign origin not effectively registered in the United States Patent Office on August 29, 1935, which has been used by such person or his predecessors in the United States for a period of at least 5 years immediately preceding August 29, 1935: <E T="03">Provided,</E> That if such trade name or brand is used, the designation of the product shall be qualified by the name of the locality in the United States in which produced, and such qualification shall be in script, type, or printing as conspicuous as the trade name or brand.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.24</SECTNO>
          <SUBJECT>Class and type.</SUBJECT>
          <P>(a) The class of the malt beverage shall be stated and, if desired, the type thereof may be stated. Statements of class and type shall conform to the designation of the product as known to the trade. If the product is not known to the trade under a particular designation, a distinctive or fanciful name, together with an adequate and truthful statement of the composition of the product, shall be stated, and such statement shall be deemed to be a statement of class and type for the purposes of this part.</P>
          <P>(b) Malt beverages which have been concentrated by the removal of water therefrom and reconstituted by the addition of water and carbon dioxide shall for the purpose of this part be labeled in the same manner as malt beverages which have not been concentrated and reconstituted, except that there shall appear in direct conjunction with, and as a part of, the class designation the statement “PRODUCED FROM ____ CONCENTRATE” (the blank to be filled in with the appropriate class designation). All parts of the class designation shall appear in lettering of substantially the same size and kind.</P>
          <P>(c) No product shall be designated as “half and half” unless it is in fact composed of equal parts of two classes of malt beverages the names of which are conspicuously stated in conjunction with the designation “half and half”.</P>

          <P>(d) Products containing less than one-half of 1 percent (.5%) of alcohol by volume shall bear the class designation “malt beverage,” or “cereal beverage,” or “near beer.” If the designation “near beer” is used, both words must appear in the same size and style of type, in the same color of ink, and on <PRTPAGE P="97"/>the same background. No product containing less than one-half of 1 percent of alcohol by volume shall bear the class designations “beer”, “lager beer”, “lager”, “ale”, “porter”, or “stout”, or any other class or type designation commonly applied to malt beverages containing one-half of 1 percent or more of alcohol by volume.</P>
          <P>(e) No product other than a malt beverage fermented at comparatively high temperature, possessing the characteristics generally attributed to “ale,” “porter,” or “stout” and produced without the use of coloring or flavoring materials (other than those recognized in standard brewing practices) shall bear any of these class designations.</P>

          <P>(f) Geographical names for distinctive types of malt beverages (other than names found under paragraph (g) of this section to have become generic) shall not be applied to malt beverages produced in any place other than the particular region indicated by the name unless (1) in direct conjunction with the name there appears the word “type” or the word “American”, or some other statement indicating the true place of production in lettering substantially as conspicuous as such name, and (2) the malt beverages to which the name is applied conform to the type so designated. The following are examples of distinctive types of beer with geographical names that have not become generic; Dortmund, Dortmunder, Vienna, Wein, Weiner, Bavarian, Munich, Munchner, Salvator, Kulmbacher, Wurtzburger, Pilsen (Pilsener and Pilsner): <E T="03">Provided,</E> That notwithstanding the foregoing provisions of this section, beer which is produced in the United States may be designated as “Pilsen,” “Pilsener,” or “Pilsner” without further modification, if it conforms to such type.</P>
          <P>(g) Only such geographical names for distinctive types of malt beverages as the appropriate TTB officer finds have by usage and common knowledge lost their geographical significance to such an extent that they have become generic shall be deemed to have become generic, e.g., India Pale Ale.</P>
          <P>(h) Except as provided in § 7.23(b), geographical names that are not names for distinctive types of malt beverages shall not be applied to malt beverages produced in any place other than the particular place or region indicated in the name.</P>
          <CITA>[T.D. 6672, 28 FR 9637, Aug. 31, 1963, as amended at 29 FR 3572, Mar. 20, 1964; T.D. ATF-249, 52 FR 5956, Feb. 27, 1987; T.D. ATF 280, 54 FR 3594, Jan. 25, 1989; T.D. ATF-425, 65 FR 11892, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.25</SECTNO>
          <SUBJECT>Name and address.</SUBJECT>
          <P>(a) <E T="03">Domestic malt beverages.</E> (1) On labels of containers of domestic malt beverages there shall be stated the name of the bottler or packer and the place where bottled or packed. The bottler's or packer's principal place of business may be shown in lieu of the actual place where bottled or packed if the address shown is a location where bottling or packing operation takes place. The appropriate TTB officer may disapprove the listing of a principal place of business if its use would create a false or misleading impression as to the geographic origin of the beer.</P>
          <P>(2) If malt beverages are bottled or packed for a person other than the actual bottler or packer there may be stated in addition to the name and address of the bottler or packer (but not in lieu of), the name and address of such other person immediately preceded by the words “bottled for,” “distributed by,” or other similar appropriate phrase.</P>
          <P>(b) <E T="03">Imported malt beverages.</E> On labels of containers of imported malt beverages, there shall be stated the words “imported by,” or a singular appropriate phrase, and immediately thereafter the name of the permittee who is the importer, or exclusive agent, or sole distributor, or other person responsible for the importation, together with the principal place of business in the United States of such person. In addition there may, but need not, be stated unless required by State or foreign law or regulation the name and principal place of business of the foreign manufacturer, bottler, packer, or shipper.</P>
          <P>(c) <E T="03">Post-office address.</E> The “place” stated shall be the post-office address, except that the street address may be omitted. No additional places or addresses shall be stated for the same <PRTPAGE P="98"/>person, unless (1) such person is actively engaged in the conduct of an additional bona fide and actual malt beverage business at such additional place or address, and (2) the label also contains, in direct conjunction therewith, appropriate descriptive material indicating the function occurring at such additional place or address in connection with the particular malt beverage.</P>
          <APPRO>(Approved by the Office of Management and Budget under control number 1512-0474)</APPRO>
          <CITA>[T.D. 6551, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF-225, 51 FR 8492, Mar. 12, 1986]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.26</SECTNO>
          <SUBJECT>Alcoholic content [suspended as of April 19, 1993; see § 7.71].</SUBJECT>
          <P>(a) The alcoholic content and the percentage and quantity of the original extract shall not be stated unless required by State law. When alcoholic content is required to be stated, but the manner of statement is not specified in the State law, it shall be stated in percentage of alcohol by weight or by volume, and not by proof or by maximums or minimums. Otherwise the manner of statement shall be as specified in the State law.</P>
          <P>(b) The terms “low alcohol” or “reduced alcohol” may be used only on malt beverage products containing less than 2.5 percent alcohol by volume.</P>
          <P>(c) The term “non-alcoholic” may be used on malt beverage products, provided the statement “contains less than 0.5 percent (or .5%) alcohol by volume” appears in direct conjunction with it, in readily legible printing and on a completely contrasting background.</P>
          <P>(d) The term “alcohol-free” may be used only on malt beverage products containing no alcohol.</P>
          <CITA>[T.D. 6521, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF 280, 54 FR 3594, Jan. 25, 1989; T.D. ATF-339, 58 FR 21231, Apr. 19, 1993]</CITA>
          <EFFDNOT>
            <HD SOURCE="HED">Effective Date Note:</HD>
            <P>At 58 FR 21231, Apr. 19, 1993, § 7.26 was suspended indefinitely.</P>
          </EFFDNOT>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.27</SECTNO>
          <SUBJECT>Net contents.</SUBJECT>
          <P>(a) Net contents shall be stated as follows:</P>
          <P>(1) If less than 1 pint, in fluid ounces, or fractions of a pint.</P>
          <P>(2) If 1 pint, 1 quart, or 1 gallon, the net contents shall be so stated.</P>
          <P>(3) If more than 1 pint, but less than 1 quart, the net contents shall be stated in fractions of a quart, or in pints and fluid ounces.</P>
          <P>(4) If more than 1 quart, but less than 1 gallon, the net contents shall be stated in fractions of a gallon, or in quarts, pints, and fluid ounces.</P>
          <P>(5) If more than 1 gallon, the net contents shall be stated in gallons and fractions thereof.</P>
          <P>(b) All fractions shall be expressed in their lowest denominations.</P>
          <P>(c) The net contents need not be stated on any label if the net contents are displayed by having the same blown, branded, or burned in the container in letters or figures in such manner as to be plainly legible under ordinary circumstances and such statement is not obscured in any manner in whole or in part.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.28</SECTNO>
          <SUBJECT>General requirements.</SUBJECT>
          <P>(a) <E T="03">Contrasting background.</E> All labels shall be so designed that all statements required by this subpart are readily legible under ordinary conditions, and all the statements are on a contrasting background.</P>
          <P>(b) <E T="03">Size of type</E>— (1) <E T="03">Containers of more than one-half pint.</E> Except for statements of alcoholic content, all mandatory information required on labels by this part shall be in script, type, or printing not smaller than 2 millimeters. If contained among other descriptive or explanatory information, the script, type, or printing of all mandatory information shall be of a size substantially more conspicuous than that of the descriptive or explanatory information.</P>
          <P>(2) <E T="03">Containers of one-half pint or less.</E> Except for statements of alcoholic content, all mandatory information required on labels by this part shall be in script, type, or printing not smaller than 1 millimeter. If contained among other descriptive or explanatory information, the script, type, or printing of all mandatory information shall be of a size substantially more conspicuous than that of the descriptive or explanatory information.</P>
          <P>(3) <E T="03">Alcoholic content statement.</E> All portions of the alcoholic content statement shall be of the same size and kind of lettering and of equally conspicuous <PRTPAGE P="99"/>color. Unless otherwise required by State law, the statement of alcoholic content shall be in script, type, or printing:</P>
          <P>(i) Not smaller than 1 millimeter for containers of one-half pint or less, or smaller than 2 millimeters for containers larger than one-half pint; or</P>
          <P>(ii) Not larger than 3 millimeters for containers of 40 fl. oz. or less, or larger than 4 millimeters for containers larger than 40 fl. oz.</P>
          <P>(c) <E T="03">English language.</E> All information, other than the brand name, required by this subpart to be stated on labels shall be in the English language. Additional statements in foreign languages may be made, if the statements do not conflict with, or are contradictory to, the requirements of this subpart. Labels on containers of malt beverages bottled or packed for consumption within Puerto Rico may, if desired, state the information required by this subpart solely in the Spanish language, in lieu of the English language, except that the net contents shall also be stated in the English language.</P>
          <P>(d) <E T="03">Labels firmly affixed.</E> All labels shall be affixed to containers of malt beverages in such manner that they cannot be removed without thorough application of water or other solvents.</P>
          <P>(e) <E T="03">Additional information.</E> Labels may contain information other than the mandatory label information required by this subpart if the information complies with the requirements of this subpart and does not conflict with, or in any manner qualify, statements required by this part.</P>
          <CITA>[T.D. ATF-66, 45 FR 40552, June 13, 1980, as amended by T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-339, 58 FR 21231, Apr. 19, 1993]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.29</SECTNO>
          <SUBJECT>Prohibited practices.</SUBJECT>
          <P>(a) <E T="03">Statements on labels.</E> Containers of malt beverages, or any labels on such containers, or any carton, case, or individual covering of such containers, used for sale at retail, or any written, printed, graphic, or other material accompanying such containers to the consumer, must not contain:</P>
          <P>(1) Any statement that is false or untrue in any particular, or that, irrespective of falsity, directly, or by ambiguity, omission, or inference, or by the addition of irrelevant, scientific or technical matter, tends to create a misleading impression.</P>
          <P>(2) Any statement that is disparaging of a competitor's products.</P>
          <P>(3) Any statement, design, device, or representation which is obscene or indecent.</P>
          <P>(4) Any statement, design, device, or representation of or relating to analyses, standards, or tests, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer.</P>
          <P>(5) Any statement, design, device, or representation of or relating to any guarantee, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer. Money-back guarantees are not prohibited.</P>

          <P>(6) A trade or brand name that is the name of any living individual of public prominence, or existing private or public organization, or is a name that is in simulation or is an abbreviation thereof, or any graphic, pictorial, or emblematic representation of any such individual or organization, if the use of such name or representation is likely falsely to lead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of, such individual or organization: <E T="03">Provided,</E> That this paragraph shall not apply to the use of the name of any person engaged in business as a producer, importer, bottler, packer, wholesaler, retailer, or warehouseman, of malt beverages, nor to the use by any person of a trade or brand name that is the name of any living individual of public prominence, or existing private or public organization, provided such trade or brand name was used by him or his predecessors in interest prior to August 29, 1935.</P>
          <P>(7) Any statement, design, device, or representation that tends to create a false or misleading impression that the malt beverage contains distilled spirits or is a distilled spirits product. This paragraph does not prohibit the following on malt beverage labels:</P>

          <P>(i) A truthful and accurate statement of alcohol content, in conformity with § 7.71;<PRTPAGE P="100"/>
          </P>
          <P>(ii) The use of a brand name of a distilled spirits product as a malt beverage brand name, provided that the overall label does not present a misleading impression about the identity of the product; or</P>
          <P>(iii) The use of a cocktail name as a brand name or fanciful name of a malt beverage, provided that the overall label does not present a misleading impression about the identity of the product.</P>
          <P>(b) <E T="03">Simulation of Government stamps.</E> No label shall be of such design as to resemble or simulate a stamp of the United States Government or of any State or foreign government. No label, other than stamps authorized or required by the United States Government or any State or foreign government, shall state or indicate that the malt beverage contained in the labeled container is brewed, made, bottled, packed, labeled, or sold under, or in accordance with, any municipal, State, Federal, or foreign government authorization, law, or regulation, unless such statement is required or specifically authorized by Federal, State, or municipal, law or regulation, or is required or specifically authorized by the laws or regulations of the foreign country in which such malt beverages were produced. If the municipal or State government permit number is stated upon a label, it shall not be accompanied by an additional statement relating thereto, unless required by State law.</P>
          <P>(c) <E T="03">Use of word “bonded”, etc.</E> The words “bonded”, “bottled in bond”, “aged in bond”, “bonded age”, “bottled under customs supervision”, or phrases containing these or synonymous terms which imply governmental supervision over production, bottling, or packing, shall not be used on any label for malt beverages.</P>
          <P>(d) <E T="03">Flags, seals, coats of arms, crests, and other insignia.</E> Labels shall not contain, in the brand name or otherwise, any statement, design, device, or pictorial representation which the appropriate TTB officer finds relates to, or is capable of being construed as relating to, the armed forces of the United States, or the American flag, or any emblem, seal, insignia, or decoration associated with such flag or armed forces; nor shall any label contain any statement, design, device, or pictorial representation of or concerning any flag, seal, coat of arms, crest or other insignia, likely to mislead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of the government, organization, family, or individual with whom such flag, seal, coat of arms, crest, or insignia is associated.</P>
          <P>(e) <E T="03">Health-related statements</E>—(1) <E T="03">Definitions.</E> When used in this paragraph (e), terms are defined as follows:</P>
          <P>(i) <E T="03">Health-related statement</E> means any statement related to health (other than the warning statement required by § 16.21 of this chapter) and includes statements of a curative or therapeutic nature that, expressly or by implication, suggest a relationship between the consumption of alcohol, malt beverages, or any substance found within the malt beverage, and health benefits or effects on health. The term includes both specific health claims and general references to alleged health benefits or effects on health associated with the consumption of alcohol, malt beverages, or any substance found within the malt beverage, as well as health-related directional statements. The term also includes statements and claims that imply that a physical or psychological sensation results from consuming the malt beverage, as well as statements and claims of nutritional value (<E T="03">e.g.,</E> statements of vitamin content). Statements concerning caloric, carbohydrate, protein, and fat content do not constitute nutritional claims about the product.</P>
          <P>(ii) <E T="03">Specific health claim</E> is a type of health-related statement that, expressly or by implication, characterizes the relationship of the malt beverage, alcohol, or any substance found within the malt beverage, to a disease or health-related condition. Implied specific health claims include statements, symbols, vignettes, or other forms of communication that suggest, within the context in which they are presented, that a relationship exists between malt beverages, alcohol, or any substance found within the malt beverage, and a disease or health-related condition.<PRTPAGE P="101"/>
          </P>
          <P>(iii) <E T="03">Health-related directional statement</E> is a type of health-related statement that directs or refers consumers to a third party or other source for information regarding the effects on health of malt beverage or alcohol consumption.</P>
          <P>(2) <E T="03">Rules for labeling</E>—(i) <E T="03">Health-related statements.</E> In general, labels may not contain any health-related statement that is untrue in any particular or tends to create a misleading impression as to the effects on health of alcohol consumption. TTB will evaluate such statements on a case-by-case basis and may require as part of the health-related statement a disclaimer or some other qualifying statement to dispel any misleading impression conveyed by the health-related statement.</P>
          <P>(ii) <E T="03">Specific health claims.</E> (A) TTB will consult with the Food and Drug Administration (FDA), as needed, on the use of a specific health claim on a malt beverage label. If FDA determines that the use of such a labeling claim is a drug claim that is not in compliance with the requirements of the Federal Food, Drug, and Cosmetic Act, TTB will not approve the use of that specific health claim on a malt beverage label.</P>
          <P>(B) TTB will approve the use of a specific health claim on a malt beverage label only if the claim is truthful and adequately substantiated by scientific or medical evidence; sufficiently detailed and qualified with respect to the categories of individuals to whom the claim applies; adequately discloses the health risks associated with both moderate and heavier levels of alcohol consumption; and outlines the categories of individuals for whom any levels of alcohol consumption may cause health risks. This information must appear as part of the specific health claim.</P>
          <P>(iii) <E T="03">Health-related directional statements.</E> A statement that directs consumers to a third party or other source for information regarding the effects on health of malt beverage or alcohol consumption is presumed misleading unless it—</P>
          <P>(A) Directs consumers in a neutral or other non-misleading manner to a third party or other source for balanced information regarding the effects on health of malt beverage or alcohol consumption; and</P>
          <P>(B)(<E T="03">1</E>) Includes as part of the health-related directional statement the following disclaimer: “This statement should not encourage you to drink or to increase your alcohol consumption for health reasons;” or</P>
          <P>(<E T="03">2</E>) Includes as part of the health-related directional statement some other qualifying statement that the appropriate TTB officer finds is sufficient to dispel any misleading impression conveyed by the health-related directional statement.</P>
          <P>(f) <E T="03">Use of words “strong,” “full strength,” and similar words.</E> Labels shall not contain the words “strong,” “full strength,” “extra strength,” “high test,” “high proof,” “pre-war strength,” “full oldtime alcoholic strength,” or similar words or statements, likely to be considered as statements of alcoholic content, unless required by State law. This does not preclude use of the terms “low alcohol,” “reduced alcohol,” “non-alcoholic,” and “alcohol-free,” in accordance with § 7.71 (d), (e), and (f), nor does it preclude labeling with the alcohol content in accordance with § 7.71.</P>
          <P>(g) <E T="03">Use of numerals.</E> Labels shall not contain any statements, designs, or devices, whether in the form of numerals, letters, characters, figures, or otherwise, which are likely to be considered as statements of alcoholic content, unless required by State law, or as permitted by § 7.71.</P>
          <P>(h) <E T="03">Coverings, cartons, or cases.</E> Individual coverings, cartons, cases, or other wrappers of containers of malt beverages, used for sale at retail, or any written, printed, graphic, or other matter accompanying the container shall not contain any statement or any graphic pictorial, or emblematic representation, or other matter, which is prohibited from appearing on any label or container of malt beverages.</P>
          <CITA>[T.D. 6521, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF-66, 45 FR 40552, June 13, 1980; T.D. ATF-180, 49 FR 31674, Aug. 8, 1984; T.D. ATF 280, 54 FR 3594, Jan. 25, 1989; T.D. ATF-339, 58 FR 21232, Apr. 19, 1993; TTB T.D.-1, 68 FR 10105, Mar. 3, 2003; TTB T.D.-21, 70 FR 234, Jan. 3, 2005]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <PRTPAGE P="102"/>
        <HD SOURCE="HED">Subpart D—Requirements for Withdrawal of Imported Malt Beverages From Customs Custody</HD>
        <SECTION>
          <SECTNO>§ 7.30</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>Sections 7.30 and 7.31 shall apply to withdrawals of malt beverages from customs custody only in the event that the laws or regulations of the State in which such malt beverages are withdrawn for consumption require that all malt beverages sold or otherwise disposed of in such State be labeled in conformity with the requirements of §§ 7.20 through 7.29.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.31</SECTNO>
          <SUBJECT>Label approval and release.</SUBJECT>
          <P>(a) <E T="03">Certificate of label approval.</E> No imported malt beverages in containers shall be released from Customs custody for consumption unless there is deposited with the appropriate Customs officer at the port of entry the original or a photostatic copy of an approved certificate of label approval, TTB Form 5100.31.</P>
          <P>(b) <E T="03">Release.</E> If the original or photostatic copy of TTB Form 5100.31 has been approved, the brand or lot of imported malt beverages bearing labels identical with those shown thereon may be released from U.S. Customs custody.</P>
          <P>(c) <E T="03">Relabeling.</E> Imported malt beverages in U.S. Customs custody which are not labeled in conformity with certificates of label approval issued by the appropriate TTB officer must be relabeled, prior to release, under the supervision and direction of the U.S. Customs officers of the port at which the malt beverages are located.</P>
          <P>(d) <E T="03">Formula and samples.</E> The appropriate TTB officer may require an importer to submit a formula for a malt beverage, or a sample of any malt beverage or ingredients used in producing a malt beverage, prior to or in conjunction with the filing of a certificate of label approval on TTB Form 5100.31.</P>
          <P>(e) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial, and revocation of certificates of label approval, as well as appeal procedures, see part 13 of this chapter.</P>
          <CITA>[T.D. ATF-66, 45 FR 40552, June 13, 1980, as amended by T.D. ATF-94, 46 FR 55097, Nov. 6, 1981; T.D. ATF-242, 51 FR 39525, Oct. 29, 1986; T.D. ATF-359, 59 FR 42160, Aug. 17, 1994; T.D. ATF-406, 64 FR 2129, Jan. 13, 1999; TTB T.D.-21, 70 FR 235, Jan. 3, 2005]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart E—Requirements for Approval of Labels of Malt Beverages Domestically Bottled or Packed</HD>
        <SECTION>
          <SECTNO>§ 7.40</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>Sections 7.40 through 7.42 shall apply only to persons bottling or packing malt beverages (other than malt beverages in customs custody) for shipment, or delivery for sale or shipment, into a State, the laws or regulations of which require that all malt beverages sold or otherwise disposed of in such State be labeled in conformity with the requirements of §§ 7.20 through 7.29.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.41</SECTNO>
          <SUBJECT>Certificates of label approval.</SUBJECT>
          <P>(a) <E T="03">Requirement.</E> No person may bottle or pack malt beverages, or remove malt beverages from the plant where bottled or packed unless an approved certificate of label approval, TTB Form 5100.31, is issued.</P>
          <P>(b) <E T="03">Cross reference.</E> For procedures regarding the issuance, denial, and revocation of certificates of label approval, as well as appeal procedures, see part 13 of this chapter.</P>
          <CITA>[T.D. ATF-406, 64 FR 2129, Jan. 13, 1999, as amended by T.D. ATF-425, 65 FR 11892, Mar. 7, 2000]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.42</SECTNO>
          <SUBJECT>Exhibiting certificates to Government officials.</SUBJECT>
          <P>Any bottler or packer holding an original or duplicate original of a certificate of label approval shall, upon demand exhibit such certificate to a duly authorized representative of the United States Government or any duly authorized representative of a State or political subdivision thereof.</P>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <PRTPAGE P="103"/>
        <HD SOURCE="HED">Subpart F—Advertising of Malt Beverages</HD>
        <SECTION>
          <SECTNO>§ 7.50</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>No person engaged in business as a brewer, wholesaler, or importer, of malt beverages directly or indirectly or through an affiliate, shall publish or disseminate or cause to be published or disseminated by radio or television broadcast, or in any newspaper, periodical, or any publication, by any sign or outdoor advertisement, or in any other printed or graphic matter, any advertisement of malt beverages, if such advertising is in, or is calculated to induce sales in, interstate or foreign commerce, or is disseminated by mail, unless such advertisement is in conformity with §§ 7.50-7.55 of this part. Provided, that such sections shall not apply to outdoor advertising in place on (effective date of this Treasury decision), but shall apply upon replacement, restoration, or renovation of any such advertising; and provided further, that §§ 7.50-7.55 of this part shall apply to advertisements of malt beverages intended to be sold or shipped or delivered for shipment, or otherwise introduced into or received in any State from any place outside thereof, only to the extent that the laws of such State impose similar requirements with respect to advertisements of malt beverages manufactured and sold or otherwise disposed of in such State. And provided further that such sections shall not apply to a retailer or the publisher of any newspaper, periodical, or other publication, or radio or television broadcast, unless such retailer or publisher or radio or television broadcaster is engaged in business as a brewer, wholesaler, bottler, or importer of malt beverages, directly or indirectly, or through an affiliate.</P>
          <CITA>[T.D. ATF-180, 49 FR 31675, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.51</SECTNO>
          <SUBJECT>Definitions.</SUBJECT>
          <P>As used in §§ 7.50 through 7.55 of this part, the term “advertisement” includes any written or verbal statement, illustration, or depiction which is in, or calculated to induce sales in, interstate or foreign commerce, or is disseminated by mail, whether it appears in a newspaper, magazine, trade booklet, menu, wine card, leaflet, circular, mailer, book insert, catalog, promotional material, sales pamphlet, or in any written, printed, graphic, or other matter accompanying the container, representations made on cases, or in any billboard, sign, or other outdoor advertisement, public transit card, other periodical literature, publication, or in a radio or television broadcast, or in any other media; except that such term shall not include:</P>
          <P>(a) Any label affixed to any container of malt beverages; or any coverings, cartons, or cases of containers of malt beverages used for sale at retail which constitute a part of the labeling under §§ 7.20 through 7.29 of this part.</P>
          <P>(b) Any editorial or other reading material (<E T="03">i.e.,</E> news release) in any periodical or publication or newspaper for the publication of which no money or valuable consideration is paid or promised, directly or indirectly, by any brewer, and which is not written by or at the direction of the brewer.</P>
          <CITA>[T.D. ATF-180, 49 FR 31675, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.52</SECTNO>
          <SUBJECT>Mandatory statements.</SUBJECT>
          <P>(a) <E T="03">Responsible advertiser.</E> The advertisement shall state the name and address of the brewer, bottler, packer, wholesaler, or importer responsible for its publication or broadcast. Street number and name may be omitted in the address.</P>
          <P>(b) <E T="03">Class.</E> The advertisement shall contain a conspicuous statement of the class to which the product belongs, corresponding to the statement of class which is required to appear on the label of the product.</P>
          <P>(c) <E T="03">Exception.</E> (1) If an advertisement refers to a general malt beverage line or all of the malt beverage products of one company, whether by the company name or by the brand name common to all the malt beverages in the line, the only mandatory information necessary is the name and address of the responsible advertiser. This exception does not apply where only one type of malt beverage is marketed under the specific brand name advertised.<PRTPAGE P="104"/>
          </P>
          <P>(2) On consumer specialty items, the only information necessary is the company name or brand name of the product.</P>
          <CITA>[T.D. 6521, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF-180, 49 FR 31675, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.53</SECTNO>
          <SUBJECT>Legibility of mandatory information.</SUBJECT>
          <P>(a) Statements required under §§ 7.50 through 7.55 of this part that appear in any written, printed, or graphic advertisement shall be in lettering or type size sufficient to be conspicuous and readily legible.</P>
          <P>(b) In the case of signs, billboards, and displays the name and address of the permittee responsible for the advertisement may appear in type size of lettering smaller than the other mandatory information, provided such information can be ascertained upon closer examination of the sign or billboard.</P>
          <P>(c) Mandatory information shall be so stated as to be clearly a part of the advertisement and shall not be separated in any manner from the remainder of the advertisement.</P>
          <P>(d) Mandatory information for two or more products shall not be stated unless clearly separated.</P>
          <P>(e) Mandatory information shall be so stated in both the print and audiovisual media that it will be readily apparent to the persons viewing the advertisement.</P>
          <CITA>[T.D. ATF-180, 49 FR 31675, Aug. 8, 1984]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.54</SECTNO>
          <SUBJECT>Prohibited statements.</SUBJECT>
          <P>(a) <E T="03">General prohibition.</E> An advertisement of malt beverages must not contain:</P>
          <P>(1) Any statement that is false or untrue in any material particular, or that, irrespective of falsity, directly, or by ambiguity, omission, or inference, or by the addition of irrelevant, scientific or technical matter, tends to create a misleading impression.</P>
          <P>(2) Any statement that is disparaging of a competitor's products.</P>
          <P>(3) Any statement, design, device, or representation which is obscene or indecent.</P>
          <P>(4) Any statement, design, device, or representation of or relating to analyses, standards, or tests, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer.</P>
          <P>(5) Any statement, design, device, or representation of or relating to any guarantee, irrespective of falsity, which the appropriate TTB officer finds to be likely to mislead the consumer. Money-back guarantees are not prohibited.</P>
          <P>(6) Any statement that the malt beverages are brewed, made, bottled, packed, labeled, or sold under, or in accordance with, any municipal, State, or Federal authorization, law, or regulation; and if a municipal or State permit number is stated, the permit number shall not be accompanied by any additional statement relating thereto.</P>
          <P>(7) The words “bonded”, “bottled in bond”, “aged in bond”, “bonded age”, “bottled under customs supervision”, or phrases containing these or synonymous terms which imply governmental supervision over production, bottling, or packing.</P>
          <P>(8) Any statement, design, device, or representation that tends to create a false or misleading impression that the malt beverage contains distilled spirits or is a distilled spirits product. This paragraph does not prohibit the following in advertisements for malt beverages:</P>
          <P>(i) A truthful and accurate statement of alcohol content, in conformity with § 7.71;</P>
          <P>(ii) The use of a brand name of a distilled spirits product as a malt beverage brand name, provided that the overall advertisement does not present a misleading impression about the identity of the product; or</P>
          <P>(iii) The use of a cocktail name as a brand name or fanciful name of a malt beverage, provided that the overall advertisement does not present a misleading impression about the identity of the product.</P>
          <P>(b) <E T="03">Statements inconsistent with labeling.</E> (1) Advertisements shall not contain any statement concerning a brand or lot of malt beverages that is inconsistent with any statement on the labeling thereof.</P>

          <P>(2) Any label depicted on a bottle in an advertisement shall be a reproduction of an approved label.<PRTPAGE P="105"/>
          </P>
          <P>(c) <E T="03">Alcoholic content.</E> (1) Advertisements shall not contain the words “strong,” “full strength,” “extra strength,” “high test,” “high proof,” “full alcohol strength,” or any other statement of alcoholic content, or any statement of the percentage and quantity of the original extract, or any numerals, letters, characters, figures, or similar words or statements, likely to be considered as statements of alcoholic content, unless required by State law. This does not preclude use of the terms “low alcohol,” “reduced alcohol,” “non-alcoholic,” and “alcohol-free,” as used on labels, in accordance with § 7.71 (d), (e), and (f).</P>
          <P>(2) An approved malt beverage label which bears a statement of alcoholic content permitted under § 7.71 may be depicted in any advertising media. The statement of alcoholic content on the label may not appear more prominently in the advertisement than it does on the approved label.</P>
          <P>(3) An actual malt beverage bottle showing the approved label bearing a statement of alcoholic content permitted under § 7.71 may be displayed in any advertising media.</P>
          <P>(d) <E T="03">Class.</E> (1) No product containing less than one-half of 1 per centum of alcohol by volume shall be designated in any advertisement as “beer”, “lager beer”, “lager”, “ale”, “porter”, or “stout”, or by any other class or type designation commonly applied to fermented malt beverages containing one-half of 1 per centum or more of alcohol by volume.</P>
          <P>(2) No product other than a malt beverage fermented at comparatively high temperature, possessing the characteristics generally attributed to “ale,” “porter,” or “stout” and produced without the use of coloring or flavoring materials (other than those recognized in standard brewing practices) shall be designated in any advertisement by any of these class designations.</P>
          <P>(e) <E T="03">Health-related statements</E>—(1) <E T="03">Definitions.</E> When used in this paragraph (e), terms are defined as follows:</P>
          <P>(i) <E T="03">Health-related statement</E> means any statement related to health and includes statements of a curative or therapeutic nature that, expressly or by implication, suggest a relationship between the consumption of alcohol, malt beverages, or any substance found within the malt beverage, and health benefits or effects on health. The term includes both specific health claims and general references to alleged health benefits or effects on health associated with the consumption of alcohol, malt beverages, or any substance found within the malt beverage, as well as health-related directional statements. The term also includes statements and claims that imply that a physical or psychological sensation results from consuming the malt beverage, as well as statements and claims of nutritional value (<E T="03">e.g.,</E> statements of vitamin content). Statements concerning caloric, carbohydrate, protein, and fat content do not constitute nutritional claims about the product.</P>
          <P>(ii) <E T="03">Specific health claim</E> is a type of health-related statement that, expressly or by implication, characterizes the relationship of the malt beverage, alcohol, or any substance found within the malt beverage, to a disease or health-related condition. Implied specific health claims include statements, symbols, vignettes, or other forms of communication that suggest, within the context in which they are presented, that a relationship exists between malt beverages, alcohol, or any substance found within the malt beverage, and a disease or health-related condition.</P>
          <P>(iii) <E T="03">Health-related directional statement</E> is a type of health-related statement that directs or refers consumers to a third party or other source for information regarding the effects on health of malt beverage or alcohol consumption.</P>
          <P>(2) <E T="03">Rules for advertising</E>—(i) <E T="03">Health-related statements.</E> In general, advertisements may not contain any health-related statement that is untrue in any particular or tends to create a misleading impression as to the effects on health of alcohol consumption. TTB will evaluate such statements on a case-by-case basis and may require as part of the health-related statement a disclaimer or some other qualifying statement to dispel any misleading impression conveyed by the health-related statement. Such disclaimer or <PRTPAGE P="106"/>other qualifying statement must appear as prominent as the health-related statement.</P>
          <P>(ii) <E T="03">Specific health claims.</E> A specific health claim will not be considered misleading if it is truthful and adequately substantiated by scientific or medical evidence; sufficiently detailed and qualified with respect to the categories of individuals to whom the claim applies; adequately discloses the health risks associated with both moderate and heavier levels of alcohol consumption; and outlines the categories of individuals for whom any levels of alcohol consumption may cause health risks. This information must appear as part of the specific health claim and in a manner as prominent as the specific health claim.</P>
          <P>(iii) <E T="03">Health-related directional statements.</E> A statement that directs consumers to a third party or other source for information regarding the effects on health of malt beverage or alcohol consumption is presumed misleading unless it—</P>
          <P>(A) Directs consumers in a neutral or other non-misleading manner to a third party or other source for balanced information regarding the effects on health of malt beverage or alcohol consumption; and</P>
          <P>(B)(<E T="03">1</E>) Includes as part of the health-related directional statement, and in a manner as prominent as the health-related directional statement, the following disclaimer: “This statement should not encourage you to drink or increase your alcohol consumption for health reasons;” or</P>
          <P>(<E T="03">2</E>) Includes as part of the health-related directional statement, and in a manner as prominent as the health-related directional statement, some other qualifying statement that the appropriate TTB officer finds is sufficient to dispel any misleading impression conveyed by the health-related directional statement.</P>
          <P>(f) <E T="03">Confusion of brands.</E> Two or more different brands or lots of malt beverages shall not be advertised in one advertisement (or in two or more advertisements in one issue of a periodical or a newspaper or in one piece of other written, printed, or graphic matter) if the advertisement tends to create the impression that representations made as to one brand or lot apply to the other or others, and if as to such latter the representations contravene any provision of §§ 7.50 through 7.54 or are in any respect untrue.</P>
          <P>(g) <E T="03">Flags, seals, coats of arms, crests, and other insignia.</E> No advertisement shall contain any statement, design, device, or pictorial representation of or relating to, or capable of being construed as relating to the armed forces of the United States, or of the American flag, or of any emblem, seal, insignia, or decoration associated with such flag or armed forces; nor shall any advertisement contain any statement, device, design, or pictorial representation of or concerning any flag, seal, coat of arms, crest, or other insignia, likely to mislead the consumer to believe that the product has been endorsed, made, or used by, or produced for, or under the supervision of, or in accordance with the specifications of the government, organization, family, or individual with whom such flag, seal, coat of arms, crest, or insignia is associated.</P>
          <P>(h) <E T="03">Deceptive advertising techniques.</E> Subliminal or similar techniques are prohibited. “Subliminal or similar techniques,” as used in this part, refers to any device or technique that is used to convey, or attempts to convey, a message to a person by means of images or sounds of a very brief nature that cannot be perceived at a normal level of awareness.</P>
          <CITA>[T.D. 6521, 25 FR 13859, Dec. 29, 1960, as amended by T.D. ATF-180, 49 FR 31675, Aug. 8, 1984; T.D. ATF 280, 54 FR 3594, Jan. 25, 1989; T.D. ATF-339, 58 FR 21232, Apr. 19, 1993; TTB T.D.-1, 68 FR 10106, Mar. 3, 2003; TTB T.D.-21, 70 FR 235, Jan. 3, 2005]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 7.55</SECTNO>
          <SUBJECT>Comparative advertising.</SUBJECT>
          <P>(a) <E T="03">General.</E> Comparative advertising shall not be disparaging of a competitor's product.</P>
          <P>(b) <E T="03">Taste tests.</E> (1) Taste test results may be used in advertisements comparing competitors' products unless they are disparaging, deceptive, or likely to mislead the consumer.</P>

          <P>(2) The taste test procedure used shall meet scientifically accepted procedures. An example of a scientifically accepted procedure is outlined in the <E T="03">Manual on Sensory Testing Methods,</E> ASTM Special Technical Publication <PRTPAGE P="107"/>434, published by the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103, ASTM, 1968, Library of Congress Catalog Card Number 68-15545.</P>
          <P>(3) A statement shall appear in the advertisement providing the name and address of the testing administrator.</P>
          <CITA>[T.D. ATF-180, 49 FR 31676, Aug. 8, 1984]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart G—General Provisions</HD>
        <SECTION>
          <SECTNO>§ 7.60</SECTNO>
          <SUBJECT>Exports.</SUBJECT>
          <P>This part shall not apply to malt beverages exported in bond.</P>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart H—Interim Regulations for Alcoholic Content Statements</HD>
        <SECTION>
          <SECTNO>§ 7.71</SECTNO>
          <SUBJECT>Alcoholic content.</SUBJECT>
          <P>(a) <E T="03">General.</E> Alcoholic content and the percentage and quantity of the original gravity or extract may be stated on a label unless prohibited by State law. When alcoholic content is stated, and the manner of statement is not required under State law, it shall be stated as prescribed in paragraph (b) of this section.</P>
          <P>(b) <E T="03">Form of statement.</E> (1) Statement of alcoholic content shall be expressed in percent alcohol by volume, and not by percent by weight, proof, or by maximums or minimums.</P>
          <P>(2) For malt beverages containing 0.5 percent or more alcohol by volume, statements of alcoholic content shall be expressed to the nearest one-tenth of a percent, subject to the tolerance permitted by paragraph (c) (1) and (2) of this section. For malt beverages containing less than 0.5 percent alcohol by volume, alcoholic content may be expressed in one-hundredths of a percent, subject to the tolerance permitted in paragraph (c)(3) of this section.</P>
          <P>(3) Alcoholic content shall be expressed in the following fashion: “alcohol—percent by volume,” “alcohol by volume—percent,” “—percent alcohol by volume,” or “—percent alcohol/volume.” The abbreviations “alc” and “vol” may be used in lieu of the words “alcohol” and “volume,” and the symbol “%” may be used in lieu of the word “percent.”</P>
          <P>(c) <E T="03">Tolerances.</E> (1) For malt beverages containing 0.5 percent or more alcohol by volume, a tolerance of 0.3 percent will be permitted, either above or below the stated percentage of alcohol. Any malt beverage which is labeled as containing 0.5 percent or more alcohol by volume may not contain less than 0.5 percent alcohol by volume, regardless of any tolerance.</P>
          <P>(2) For malt beverages which are labeled as “low alcohol” or “reduced alcohol” under paragraph (d) of this section, the actual alcoholic content may not equal or exceed 2.5 percent alcohol by volume, regardless of any tolerance permitted by paragraph (c)(1) of this section.</P>
          <P>(3) For malt beverages containing less than 0.5 percent alcohol by volume, the actual alcoholic content may not exceed the labeled alcoholic content. A malt beverage may not be labeled with an alcoholic content of 0.0 percent alcohol by volume unless it is also labeled as “alcohol free” and contains no alcohol.</P>
          <P>(d) <E T="03">Low alcohol and reduced alcohol.</E> The terms “low alcohol” or “reduced alcohol” may be used only on malt beverages containing less than 2.5 percent alcohol by volume.</P>
          <P>(e) <E T="03">Non-alcoholic.</E> The term “non-alcoholic” may be used on malt beverages, provided the statement “contains less than 0.5 percent (or .5%) alcohol by volume” appears in direct conjunction with it, in readily legible printing and on a completely contrasting background.</P>
          <P>(f) <E T="03">Alcohol free.</E> The term “alcohol free” may be used only on malt beverages containing no alcohol.</P>
          <CITA>[T.D. ATF-339, 58 FR 21232, Apr. 19, 1993]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart I—Use of the Term “Organic”</HD>
        <SECTION>
          <SECTNO>§ 7.81</SECTNO>
          <SUBJECT>Use of the term “organic.”</SUBJECT>
          <P>(a) Use of the term “organic” is optional and is treated as “additional information on labels” under § 7.28(e).</P>

          <P>(b) Any use of the term “organic” on a malt beverage label or in advertising of malt beverages must comply with the United States Department of Agriculture's (USDA) National Organic Program rules (7 CFR part 205) as interpreted by the USDA.<PRTPAGE P="108"/>
          </P>
          <P>(c) This section applies to labels and advertising that use the term “organic” on and after October 21, 2002.</P>
          <CITA>[T.D. ATF-483, 67 FR 62858, Oct. 8, 2002]</CITA>
        </SECTION>
      </SUBPART>
    </PART>
    <PART>
      <EAR>Pt. 8</EAR>
      <HD SOURCE="HED">PART 8—EXCLUSIVE OUTLETS</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—Scope of Regulations</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>8.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>8.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <SECTNO>8.3</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <SECTNO>8.4</SECTNO>
          <SUBJECT>Jurisdictional limits.</SUBJECT>
          <SECTNO>8.5</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>
          <SECTNO>8.6</SECTNO>
          <SUBJECT>Administrative provisions.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>8.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Prohibited Practices</HD>
          <SECTNO>8.21</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>8.22</SECTNO>
          <SUBJECT>Contracts to purchase distilled spirits, wine, or malt beverages.</SUBJECT>
          <SECTNO>8.23</SECTNO>
          <SUBJECT>Third party arrangements.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart D—Exclusion</HD>
          <SECTNO>8.51</SECTNO>
          <SUBJECT>Exclusion, in general.</SUBJECT>
          <SECTNO>8.52</SECTNO>
          <SUBJECT>Practices which result in exclusion.</SUBJECT>
          <SECTNO>8.53</SECTNO>
          <SUBJECT>Practice not resulting in exclusion.</SUBJECT>
          <SECTNO>8.54</SECTNO>
          <SUBJECT>Criteria for determining retailer independence.</SUBJECT>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>15 U.S.C. 49-50; 27 U.S.C. 202 and 205; 44 U.S.C. 3504(h).</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. ATF-74, 45 FR 63256, Sept. 23, 1980, unless otherwise noted.</P>
      </SOURCE>
      <SUBPART>
        <HD SOURCE="HED">Subpart A—Scope of Regulations</HD>
        <SECTION>
          <SECTNO>§ 8.1</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>The regulations in this part, issued pursuant to section 105 of the Federal Alcohol Administration Act (27 U.S.C. 205), specify arrangements which are exclusive outlets under section 105(a) of the Act and criteria for determining whether a practice is a violation of section 105(a) of the Act. This part does not attempt to enumerate all of the practices prohibited by section 105(a) of the Act. Nothing in this part shall operate to exempt any person from the requirements of any State law or regulation.</P>
          <CITA>[T.D. ATF-364, 60 FR 20425, Apr. 26, 1995]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <P>This part applies to the several States of the United States, the District of Columbia, and Puerto Rico.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.3</SECTNO>
          <SUBJECT>Application.</SUBJECT>
          <P>(a) <E T="03">General.</E> This part applies only to transactions between industry members and retailers. It does not apply to transactions between two industry members; for example, between a producer and a wholesaler.</P>
          <P>(b) <E T="03">Transactions involving State agencies.</E> The regulations in this part apply only to transactions between industry members and State agencies operating as retailers as defined in this part. The regulations do not apply to State agencies with regard to their wholesale dealings with retailers.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.4</SECTNO>
          <SUBJECT>Jurisdictional limits.</SUBJECT>
          <P>(a) <E T="03">General.</E> The regulations in this part apply where:</P>
          <P>(1) The industry member requires, by agreement or otherwise, a retailer to purchase distilled spirits, wine, or malt beverages from such industry member to the exclusion in whole or in part of products sold or offered for sale by other persons in interstate or foreign commerce; and</P>
          <P>(2) If: (i) The requirement is made in the course of interstate or foreign commerce; or</P>
          <P>(ii) The industry member engages in the practice of using a requirement to such an extent as substantially to restrain or prevent transactions in interstate or foreign commerce in any such products; or</P>
          <P>(iii) The direct effect of the requirement is to prevent, deter, hinder, or restrict other persons from selling or offering for sale any such products to such retailer in interstate or foreign commerce.</P>
          <P>(b) <E T="03">Malt beverages.</E> In the case of malt beverages, this part applies to transactions between a retailer in any State and a brewer, importer, or wholesaler of malt beverages inside or outside such State only to the extent that the law of such State imposes requirements similar to the requirements of section 5(a) of the Federal Alcohol Administration Act (27 U.S.C. 205(a)), with respect to similar transactions between a retailer in such State and a <PRTPAGE P="109"/>brewer, importer, or wholesaler of malt beverages in such State.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.5</SECTNO>
          <SUBJECT>Delegations of the Administrator.</SUBJECT>

          <P>Most of the regulatory authorities of the Administrator contained in this part are delegated to appropriate TTB officers. These TTB officers are specified in TTB Order 1135.8, Delegation of the Administrator's Authorities in 27 CFR Part 8, Exclusive Outlets. You may obtain a copy of this order by accessing the TTB Web site (<E T="03">http://www.ttb.gov</E>) or by mailing a request to the Alcohol and Tobacco Tax and Trade Bureau, National Revenue Center, 550 Main Street, Room 1516, Cincinnati, OH 45202.</P>
          <CITA>[T.D. TTB-44, 71 FR 16923, Apr. 4, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.6</SECTNO>
          <SUBJECT>Administrative provisions.</SUBJECT>
          <P>(a) <E T="03">General.</E> The Act makes applicable the provisions including penalties of sections 49 and 50 of Title 15, United States Code, to the jurisdiction, powers and duties of the Administrator under this Act, and to any person (whether or not a corporation) subject to the provisions of law administered by the Administrator under this Act. The Act also provides that the Administrator is authorized to require, in such manner and such form as he or she shall prescribe, such reports as are necessary to carry out the powers and duties under this chapter.</P>
          <P>(b) <E T="03">Examination and subpoena.</E> Any appropriate TTB officer shall at all reasonable times have access to, for the purpose of examination, and the right to copy any documentary evidence of any person, partnership, or corporation being investigated or proceeded against. An appropriate TTB officer shall also have the power to require by subpoena the attendance and testimony of witnesses and the production of all such documentary evidence relating to any matter under investigation, upon a satisfactory showing the requested evidence may reasonably be expected to yield information relevant to any matter being investigated under the Act.</P>
          <P>(c) <E T="03">Reports required by the appropriate TTB officer</E>—(1) <E T="03">General.</E> The appropriate TTB officer may, as part of a trade practice investigation of an industry member, require such industry member to submit a written report containing information on sponsorships, advertisements, promotions, and other activities pertaining to its business subject to the Act conducted by, or on behalf of, or benefiting the industry member.</P>
          <P>(2) <E T="03">Preparation.</E> The report will be prepared by the industry member in letter form, executed under the penalties of perjury, and will contain the information specified by the appropriate TTB officer. The period covered by the report will not exceed three years.</P>
          <P>(3) <E T="03">Filing.</E> The report will be filed in accordance with the instructions of the appropriate TTB officer.</P>
          <APPRO>(Approved by the Office of Management and Budget under control number 1512-0392)</APPRO>
          <CITA>[T.D. ATF-364, 60 FR 20425, Apr. 26, 1995. Redesignated and amended by T.D. ATF-428, 65 FR 52020, Aug. 28, 2000]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 8.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>As used in this part, unless the context otherwise requires, terms have the meanings given in this section. Any other term defined in the Federal Alcohol Administration Act and used in this part shall have the meaning assigned to it by that Act.</P>
          <P>
            <E T="03">Act.</E> The Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">Appropriate TTB officer.</E> An officer or employee of the Alcohol and Tobacco Tax and Trade Bureau (TTB) authorized to perform any functions relating to the administration or enforcement of this part by TTB Order 1135.8, Delegation of the Administrator's Authorities in 27 CFR Part 8, Exclusive Outlets.</P>
          <P>
            <E T="03">Industry member.</E> Any person engaged in business as a distiller, brewer, rectifier, blender, or other producer, or as an importer or wholesaler, of distilled spirits, wine or malt beverages, or as a bottler, or warehouseman and bottler, of distilled spirits; industry member does not include an agency of a State <PRTPAGE P="110"/>or political subdivision thereof, or an officer or employee of such agency.</P>
          <P>
            <E T="03">Product.</E> Distilled spirits, wine or malt beverages, as defined in the Federal Alcohol Administration Act.</P>
          <P>
            <E T="03">Retailer.</E> Any person engaged in the sale of distilled spirits, wine or malt beverages to consumers. A wholesaler who makes incidental retail sales representing less than five percent of the wholesaler's total sales volume for the preceding two-month period shall not be considered a retailer with respect to such incidental sales.</P>
          <CITA>T.D. ATF-74, 45 FR 63256, Sept. 23, 1980, as amended by T.D. ATF-364, 60 FR 20425, Apr. 26, 1995; T.D. ATF-428, 65 FR 52020, Aug. 28, 2000; T.D. TTB-44, 71 FR 16923, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Prohibited Practices</HD>
        <SECTION>
          <SECTNO>§ 8.21</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>It is unlawful for an industry member to require, by agreement or otherwise, that any retailer purchase distilled spirits, wine, or malt beverages from the industry member to the exclusion, in whole or in part, of products sold or offered for sale by other persons in interstate or foreign commerce. This prohibition includes purchases coerced by industry members, through acts or threats of physical or economic harm, as well as voluntary industry member-retailer purchase agreements.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.22</SECTNO>
          <SUBJECT>Contracts to purchase distilled spirits, wine, or malt beverages.</SUBJECT>
          <P>Any contract or agreement, written or unwritten, which has the effect of requiring the retailer to purchase distilled spirits, wine, or malt beverages from the industry member beyond a single sales transaction is prohibited. Examples of such contracts are:</P>
          <P>(a) An advertising contract between an industry member and a retailer with the express or implied requirement of the purchase of the advertiser's products; or</P>
          <P>(b) A sales contract awarded on a competitive bid basis which has the effect of prohibiting the retailer from purchasing from other industry members by:</P>
          <P>(1) Requiring that for the period of the agreement, the retailer purchase a product or line of products exclusively from the industry member; or</P>
          <P>(2) Requiring that the retailer purchase a specific or minimum quantity during the period of the agreement.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.23</SECTNO>
          <SUBJECT>Third party arrangements.</SUBJECT>
          <P>Industry member requirements, by agreement or otherwise, with non-retailers which result in a retailer being required to purchase the industry member's products are within the exclusive outlet provisions. These industry member requirements are covered whether the agreement or other arrangement originates with the industry member or the third party. For example, a supplier enters into a contractual agreement or other arrangement with a third party. This agreement or arrangement contains an industry member requirement as described above. The third party, a ballclub, or municipal or private corporation, not acting as a retailer, leases the concession rights and is able to control the purchasing decisions of the retailer. The third party, as a result of the requirement, by agreement or otherwise, with the industry member, requires the retailer to purchase the industry member's products to the exclusion, in whole or in part, of products sold or offered for sale by other persons in interstate or foreign commerce. The business arrangements entered into by the industry member and the third party may consist of such things as sponsoring radio or television broadcasting, paying for advertising, or providing other services or things of value.</P>
          <CITA>[T.D. ATF-364, 60 FR 20425, Apr. 26, 1995]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart D—Exclusion</HD>
        <SOURCE>
          <HD SOURCE="HED">Source:</HD>
          <P>T.D. ATF-364, 60 FR 20425, Apr. 26, 1995, unless otherwise noted.</P>
        </SOURCE>
        <SECTION>
          <SECTNO>§ 8.51</SECTNO>
          <SUBJECT>Exclusion, in general.</SUBJECT>
          <P>(a) Exclusion, in whole or in part occurs:</P>

          <P>(1) When a practice by an industry member, whether direct, indirect, or through an affiliate, places (or has the potential to place) retailer independence at risk by means of a tie or link between the industry member and retailer or by any other means of industry member control over the retailer, and<PRTPAGE P="111"/>
          </P>
          <P>(2) Such practice results in the retailer purchasing less than it would have of a competitor's product.</P>
          <P>(b) Section 8.52 lists practices that result in exclusion. Section 8.53 lists practices not resulting in exclusion. Section 8.54 lists the criteria used for determining whether other practices can put retailer independence at risk.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.52</SECTNO>
          <SUBJECT>Practices which result in exclusion.</SUBJECT>
          <P>The practices specified in this section result in exclusion under section 105(a) of the Act. The practices specified here are examples and do not constitute a complete list of such practices:</P>
          <P>(a) Purchases of distilled spirits, wine or malt beverages by a retailer as a result, directly or indirectly, of a threat or act of physical or economic harm by the selling industry member.</P>
          <P>(b) Contracts between an industry member and a retailer which require the retailer to purchase distilled spirits, wine, or malt beverages from that industry member and expressly restrict the retailer from purchasing, in whole or in part, such products from another industry member.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.53</SECTNO>
          <SUBJECT>Practice not resulting in exclusion.</SUBJECT>
          <P>The practice specified in this section is deemed not to result in exclusion under section 105(a) of the Act: a supply contract for one year or less between the industry member and retailer under which the industry member agrees to sell distilled spirits, wine, or malt beverages to the retailer on an “as needed” basis provided that the retailer is not required to purchase any minimum quantity of such product.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 8.54</SECTNO>
          <SUBJECT>Criteria for determining retailer independence.</SUBJECT>
          <P>The criteria specified in this section are indications that a particular practice, other than those in §§ 8.52 and 8.53, places retailer independence at risk. A practice need not meet all of the criteria specified in this section in order to place retailer independence at risk.</P>
          <P>(a) The practice restricts or hampers the free economic choice of a retailer to decide which products to purchase or the quantity in which to purchase them for sale to consumers.</P>
          <P>(b) The industry member obligates the retailer to participate in the promotion to obtain the industry member's product.</P>
          <P>(c) The retailer has a continuing obligation to purchase or otherwise promote the industry member's product.</P>
          <P>(d) The retailer has a commitment not to terminate its relationship with the industry member with respect to purchase of the industry member's products.</P>
          <P>(e) The practice involves the industry member in the day-to-day operations of the retailer. For example, the industry member controls the retailer's decisions on which brand of products to purchase, the pricing of products, or the manner in which the products will be displayed on the retailer's premises.</P>
          <P>(f) The practice is discriminatory in that it is not offered to all retailers in the local market on the same terms without business reasons present to justify the difference in treatment.</P>
        </SECTION>
      </SUBPART>
    </PART>
    <PART>
      <EAR>Pt. 9</EAR>
      <HD SOURCE="HED">PART 9—AMERICAN VITICULTURAL AREAS</HD>
      <CONTENTS>
        <SUBPART>
          <HD SOURCE="HED">Subpart A—General Provisions</HD>
          <SECHD>Sec.</SECHD>
          <SECTNO>9.1</SECTNO>
          <SUBJECT>Scope.</SUBJECT>
          <SECTNO>9.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <SECTNO>9.3</SECTNO>
          <SUBJECT>Relation to parts 4 and 70 of this chapter.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart B—Definitions</HD>
          <SECTNO>9.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
        </SUBPART>
        <SUBPART>
          <HD SOURCE="HED">Subpart C—Approved American Viticultural Areas</HD>
          <SECTNO>9.21</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <SECTNO>9.22</SECTNO>
          <SUBJECT>Augusta.</SUBJECT>
          <SECTNO>9.23</SECTNO>
          <SUBJECT>Napa Valley.</SUBJECT>
          <SECTNO>9.24</SECTNO>
          <SUBJECT>Chalone.</SUBJECT>
          <SECTNO>9.25</SECTNO>
          <SUBJECT>San Pasqual Valley.</SUBJECT>
          <SECTNO>9.26</SECTNO>
          <SUBJECT>Guenoc Valley.</SUBJECT>
          <SECTNO>9.27</SECTNO>
          <SUBJECT>Lime Kiln Valley.</SUBJECT>
          <SECTNO>9.28</SECTNO>
          <SUBJECT>Santa Maria Valley.</SUBJECT>
          <SECTNO>9.29</SECTNO>
          <SUBJECT>Sonoma Valley.</SUBJECT>
          <SECTNO>9.30</SECTNO>
          <SUBJECT>North Coast.</SUBJECT>
          <SECTNO>9.31</SECTNO>
          <SUBJECT>Santa Cruz Mountains.</SUBJECT>
          <SECTNO>9.32</SECTNO>
          <SUBJECT>Los Carneros.</SUBJECT>
          <SECTNO>9.33</SECTNO>
          <SUBJECT>Fennville.</SUBJECT>
          <SECTNO>9.34</SECTNO>
          <SUBJECT>Finger Lakes.</SUBJECT>
          <SECTNO>9.35</SECTNO>
          <SUBJECT>Edna Valley.</SUBJECT>
          <SECTNO>9.36</SECTNO>
          <SUBJECT>McDowell Valley.</SUBJECT>
          <SECTNO>9.37</SECTNO>
          <SUBJECT>California Shenandoah Valley.<PRTPAGE P="112"/>
          </SUBJECT>
          <SECTNO>9.38</SECTNO>
          <SUBJECT>Cienega Valley.</SUBJECT>
          <SECTNO>9.39</SECTNO>
          <SUBJECT>Paicines.</SUBJECT>
          <SECTNO>9.40</SECTNO>
          <SUBJECT>Leelanau Peninsula.</SUBJECT>
          <SECTNO>9.41</SECTNO>
          <SUBJECT>Lancaster Valley.</SUBJECT>
          <SECTNO>9.42</SECTNO>
          <SUBJECT>Cole Ranch.</SUBJECT>
          <SECTNO>9.43</SECTNO>
          <SUBJECT>Rocky Knob.</SUBJECT>
          <SECTNO>9.44</SECTNO>
          <SUBJECT>Solano County Green Valley.</SUBJECT>
          <SECTNO>9.45</SECTNO>
          <SUBJECT>Suisun Valley.</SUBJECT>
          <SECTNO>9.46</SECTNO>
          <SUBJECT>Livermore Valley.</SUBJECT>
          <SECTNO>9.47</SECTNO>
          <SUBJECT>Hudson River Region.</SUBJECT>
          <SECTNO>9.48</SECTNO>
          <SUBJECT>Monticello.</SUBJECT>
          <SECTNO>9.49</SECTNO>
          <SUBJECT>Central Delaware Valley.</SUBJECT>
          <SECTNO>9.50</SECTNO>
          <SUBJECT>Temecula Valley.</SUBJECT>
          <SECTNO>9.51</SECTNO>
          <SUBJECT>Isle St. George.</SUBJECT>
          <SECTNO>9.52</SECTNO>
          <SUBJECT>Chalk Hill.</SUBJECT>
          <SECTNO>9.53</SECTNO>
          <SUBJECT>Alexander Valley.</SUBJECT>
          <SECTNO>9.54</SECTNO>
          <SUBJECT>Santa Ynez Valley.</SUBJECT>
          <SECTNO>9.55</SECTNO>
          <SUBJECT>Bell Mountain.</SUBJECT>
          <SECTNO>9.56</SECTNO>
          <SUBJECT>San Lucas.</SUBJECT>
          <SECTNO>9.57</SECTNO>
          <SUBJECT>Sonoma County Green Valley.</SUBJECT>
          <SECTNO>9.58</SECTNO>
          <SUBJECT>Carmel Valley.</SUBJECT>
          <SECTNO>9.59</SECTNO>
          <SUBJECT>Arroyo Seco.</SUBJECT>
          <SECTNO>9.60</SECTNO>
          <SUBJECT>Shenandoah Valley.</SUBJECT>
          <SECTNO>9.61</SECTNO>
          <SUBJECT>El Dorado.</SUBJECT>
          <SECTNO>9.62</SECTNO>
          <SUBJECT>Loramie Creek.</SUBJECT>
          <SECTNO>9.63</SECTNO>
          <SUBJECT>Linganore.</SUBJECT>
          <SECTNO>9.64</SECTNO>
          <SUBJECT>Dry Creek Valley.</SUBJECT>
          <SECTNO>9.65</SECTNO>
          <SUBJECT>North Fork of Roanoke.</SUBJECT>
          <SECTNO>9.66</SECTNO>
          <SUBJECT>Russian River Valley.</SUBJECT>
          <SECTNO>9.67</SECTNO>
          <SUBJECT>Catoctin.</SUBJECT>
          <SECTNO>9.68</SECTNO>
          <SUBJECT>Merritt Island.</SUBJECT>
          <SECTNO>9.69</SECTNO>
          <SUBJECT>Yakima Valley.</SUBJECT>
          <SECTNO>9.70</SECTNO>
          <SUBJECT>Northern Sonoma.</SUBJECT>
          <SECTNO>9.71</SECTNO>
          <SUBJECT>Hermann.</SUBJECT>
          <SECTNO>9.72</SECTNO>
          <SUBJECT>Southeastern New England.</SUBJECT>
          <SECTNO>9.73</SECTNO>
          <SUBJECT>Martha's Vineyard.</SUBJECT>
          <SECTNO>9.74</SECTNO>
          <SUBJECT>Columbia Valley.</SUBJECT>
          <SECTNO>9.75</SECTNO>
          <SUBJECT>Central Coast.</SUBJECT>
          <SECTNO>9.76</SECTNO>
          <SUBJECT>Knights Valley.</SUBJECT>
          <SECTNO>9.77</SECTNO>
          <SUBJECT>Altus.</SUBJECT>
          <SECTNO>9.78</SECTNO>
          <SUBJECT>Ohio River Valley.</SUBJECT>
          <SECTNO>9.79</SECTNO>
          <SUBJECT>Lake Michigan Shore.</SUBJECT>
          <SECTNO>9.80</SECTNO>
          <SUBJECT>York Mountain.</SUBJECT>
          <SECTNO>9.81</SECTNO>
          <SUBJECT>Fiddletown.</SUBJECT>
          <SECTNO>9.82</SECTNO>
          <SUBJECT>Potter Valley.</SUBJECT>
          <SECTNO>9.83</SECTNO>
          <SUBJECT>Lake Erie.</SUBJECT>
          <SECTNO>9.84</SECTNO>
          <SUBJECT>Paso Robles.</SUBJECT>
          <SECTNO>9.85</SECTNO>
          <SUBJECT>Willow Creek.</SUBJECT>
          <SECTNO>9.86</SECTNO>
          <SUBJECT>Anderson Valley.</SUBJECT>
          <SECTNO>9.87</SECTNO>
          <SUBJECT>Grand River Valley.</SUBJECT>
          <SECTNO>9.88</SECTNO>
          <SUBJECT>Pacheco Pass.</SUBJECT>
          <SECTNO>9.89</SECTNO>
          <SUBJECT>Umpqua Valley.</SUBJECT>
          <SECTNO>9.90</SECTNO>
          <SUBJECT>Willamette Valley.</SUBJECT>
          <SECTNO>9.91</SECTNO>
          <SUBJECT>Walla Walla Valley.</SUBJECT>
          <SECTNO>9.92</SECTNO>
          <SUBJECT>Madera.</SUBJECT>
          <SECTNO>9.93</SECTNO>
          <SUBJECT>Mendocino.</SUBJECT>
          <SECTNO>9.94</SECTNO>
          <SUBJECT>Howell Mountain.</SUBJECT>
          <SECTNO>9.95</SECTNO>
          <SUBJECT>Clarksburg.</SUBJECT>
          <SECTNO>9.96</SECTNO>
          <SUBJECT>Mississippi Delta.</SUBJECT>
          <SECTNO>9.97</SECTNO>
          <SUBJECT>Sonoita.</SUBJECT>
          <SECTNO>9.98</SECTNO>
          <SUBJECT>Monterey.</SUBJECT>
          <SECTNO>9.99</SECTNO>
          <SUBJECT>Clear Lake.</SUBJECT>
          <SECTNO>9.100</SECTNO>
          <SUBJECT>Mesilla Valley.</SUBJECT>
          <SECTNO>9.101</SECTNO>
          <SUBJECT>The Hamptons, Long Island.</SUBJECT>
          <SECTNO>9.102</SECTNO>
          <SUBJECT>Sonoma Mountain.</SUBJECT>
          <SECTNO>9.103</SECTNO>
          <SUBJECT>Mimbres Valley.</SUBJECT>
          <SECTNO>9.104</SECTNO>
          <SUBJECT>South Coast.</SUBJECT>
          <SECTNO>9.105</SECTNO>
          <SUBJECT>Cumberland Valley.</SUBJECT>
          <SECTNO>9.106</SECTNO>
          <SUBJECT>North Yuba.</SUBJECT>
          <SECTNO>9.107</SECTNO>
          <SUBJECT>Lodi.</SUBJECT>
          <SECTNO>9.108</SECTNO>
          <SUBJECT>Ozark Mountain.</SUBJECT>
          <SECTNO>9.109</SECTNO>
          <SUBJECT>Northern Neck George Washington Birthplace.</SUBJECT>
          <SECTNO>9.110</SECTNO>
          <SUBJECT>San Benito.</SUBJECT>
          <SECTNO>9.111</SECTNO>
          <SUBJECT>Kanawha River Valley.</SUBJECT>
          <SECTNO>9.112</SECTNO>
          <SUBJECT>Arkansas Mountain.</SUBJECT>
          <SECTNO>9.113</SECTNO>
          <SUBJECT>North Fork of Long Island.</SUBJECT>
          <SECTNO>9.114</SECTNO>
          <SUBJECT>Old Mission Peninsula.</SUBJECT>
          <SECTNO>9.115</SECTNO>
          <SUBJECT>Ozark Highlands.</SUBJECT>
          <SECTNO>9.116</SECTNO>
          <SUBJECT>Sonoma Coast.</SUBJECT>
          <SECTNO>9.117</SECTNO>
          <SUBJECT>Stags Leap District.</SUBJECT>
          <SECTNO>9.118</SECTNO>
          <SUBJECT>Ben Lomond Mountain.</SUBJECT>
          <SECTNO>9.119</SECTNO>
          <SUBJECT>Middle Rio Grande Valley.</SUBJECT>
          <SECTNO>9.120</SECTNO>
          <SUBJECT>Sierra Foothills.</SUBJECT>
          <SECTNO>9.121</SECTNO>
          <SUBJECT>Warren Hills.</SUBJECT>
          <SECTNO>9.122</SECTNO>
          <SUBJECT>Western Connecticut Highlands.</SUBJECT>
          <SECTNO>9.123</SECTNO>
          <SUBJECT>Mt. Veeder.</SUBJECT>
          <SECTNO>9.124</SECTNO>
          <SUBJECT>Wild Horse Valley.</SUBJECT>
          <SECTNO>9.125</SECTNO>
          <SUBJECT>Fredericksburg in the Texas Hill Country.</SUBJECT>
          <SECTNO>9.126</SECTNO>
          <SUBJECT>Santa Clara Valley.</SUBJECT>
          <SECTNO>9.127</SECTNO>
          <SUBJECT>Cayuga Lake.</SUBJECT>
          <SECTNO>9.128</SECTNO>
          <SUBJECT>Seneca Lake.</SUBJECT>
          <SECTNO>9.129</SECTNO>
          <SUBJECT>Arroyo Grande Valley.</SUBJECT>
          <SECTNO>9.130</SECTNO>
          <SUBJECT>San Ysidro District.</SUBJECT>
          <SECTNO>9.131</SECTNO>
          <SUBJECT>Mt. Harlan.</SUBJECT>
          <SECTNO>9.132</SECTNO>
          <SUBJECT>Rogue Valley.</SUBJECT>
          <SECTNO>9.133</SECTNO>
          <SUBJECT>Rutherford.</SUBJECT>
          <SECTNO>9.134</SECTNO>
          <SUBJECT>Oakville.</SUBJECT>
          <SECTNO>9.135</SECTNO>
          <SUBJECT>Virginia's Eastern Shore.</SUBJECT>
          <SECTNO>9.136</SECTNO>
          <SUBJECT>Texas Hill Country.</SUBJECT>
          <SECTNO>9.137</SECTNO>
          <SUBJECT>Grand Valley.</SUBJECT>
          <SECTNO>9.138</SECTNO>
          <SUBJECT>Benmore Valley.</SUBJECT>
          <SECTNO>9.139</SECTNO>
          <SUBJECT>Santa Lucia Highlands.</SUBJECT>
          <SECTNO>9.140</SECTNO>
          <SUBJECT>Atlas Peak.</SUBJECT>
          <SECTNO>9.141</SECTNO>
          <SUBJECT>Escondido Valley.</SUBJECT>
          <SECTNO>9.142</SECTNO>
          <SUBJECT>Bennett Valley.</SUBJECT>
          <SECTNO>9.143</SECTNO>
          <SUBJECT>Spring Mountain District.</SUBJECT>
          <SECTNO>9.144</SECTNO>
          <SUBJECT>Texas High Plains.</SUBJECT>
          <SECTNO>9.145</SECTNO>
          <SUBJECT>Dunnigan Hills.</SUBJECT>
          <SECTNO>9.146</SECTNO>
          <SUBJECT>Lake Wisconsin.</SUBJECT>
          <SECTNO>9.147</SECTNO>
          <SUBJECT>Hames Valley.</SUBJECT>
          <SECTNO>9.148</SECTNO>
          <SUBJECT>Seiad Valley.</SUBJECT>
          <SECTNO>9.149</SECTNO>
          <SUBJECT>St. Helena.</SUBJECT>
          <SECTNO>9.150</SECTNO>
          <SUBJECT>Cucamonga Valley.</SUBJECT>
          <SECTNO>9.151</SECTNO>
          <SUBJECT>Puget Sound.</SUBJECT>
          <SECTNO>9.152</SECTNO>
          <SUBJECT>Malibu-Newton Canyon.</SUBJECT>
          <SECTNO>9.153</SECTNO>
          <SUBJECT>Redwood Valley.</SUBJECT>
          <SECTNO>9.154</SECTNO>
          <SUBJECT>Chiles Valley.</SUBJECT>
          <SECTNO>9.155</SECTNO>
          <SUBJECT>Texas Davis Mountains.</SUBJECT>
          <SECTNO>9.156</SECTNO>
          <SUBJECT>Diablo Grande.</SUBJECT>
          <SECTNO>9.157</SECTNO>
          <SUBJECT>San Francisco Bay.</SUBJECT>
          <SECTNO>9.158</SECTNO>
          <SUBJECT>Mendocino Ridge.</SUBJECT>
          <SECTNO>9.159</SECTNO>
          <SUBJECT>Yorkville Highlands.</SUBJECT>
          <SECTNO>9.160</SECTNO>
          <SUBJECT>Yountville.</SUBJECT>
          <SECTNO>9.161</SECTNO>
          <SUBJECT>Oak Knoll District of Napa Valley.</SUBJECT>
          <SECTNO>9.162</SECTNO>
          <SUBJECT>Sta. Rita Hills.</SUBJECT>
          <SECTNO>9.163</SECTNO>
          <SUBJECT>Salado Creek.</SUBJECT>
          <SECTNO>9.164</SECTNO>
          <SUBJECT>River Junction.</SUBJECT>
          <SECTNO>9.165</SECTNO>
          <SUBJECT>Applegate Valley.</SUBJECT>
          <SECTNO>9.166</SECTNO>
          <SUBJECT>Diamond Mountain District.</SUBJECT>
          <SECTNO>9.167</SECTNO>
          <SUBJECT>Red Mountain.</SUBJECT>
          <SECTNO>9.168</SECTNO>
          <SUBJECT>Fair Play.</SUBJECT>
          <SECTNO>9.169</SECTNO>
          <SUBJECT>Red Hills Lake County.<PRTPAGE P="113"/>
          </SUBJECT>
          <SECTNO>9.170</SECTNO>
          <SUBJECT>Long Island.</SUBJECT>
          <SECTNO>9.171</SECTNO>
          <SUBJECT>San Bernabe.</SUBJECT>
          <SECTNO>9.172</SECTNO>
          <SUBJECT>West Elks.</SUBJECT>
          <SECTNO>9.173</SECTNO>
          <SUBJECT>Rockpile.</SUBJECT>
          <SECTNO>9.174</SECTNO>
          <SUBJECT>Yadkin Valley.</SUBJECT>
          <SECTNO>9.175</SECTNO>
          <SUBJECT>Dos Rios.</SUBJECT>
          <SECTNO>9.176</SECTNO>
          <SUBJECT>Capay Valley.</SUBJECT>
          <SECTNO>9.177</SECTNO>
          <SUBJECT>Alexandria Lakes.</SUBJECT>
          <SECTNO>9.178</SECTNO>
          <SUBJECT>Columbia Gorge.</SUBJECT>
          <SECTNO>9.179</SECTNO>
          <SUBJECT>Southern Oregon.</SUBJECT>
          <SECTNO>9.180</SECTNO>
          <SUBJECT>Dundee Hills.</SUBJECT>
          <SECTNO>9.181</SECTNO>
          <SUBJECT>McMinnville.</SUBJECT>
          <SECTNO>9.182</SECTNO>
          <SUBJECT>Ribbon Ridge.</SUBJECT>
          <SECTNO>9.183</SECTNO>
          <SUBJECT>Yamhill-Carlton District.</SUBJECT>
          <SECTNO>9.184</SECTNO>
          <SUBJECT>Trinity Lakes.</SUBJECT>
          <SECTNO>9.185</SECTNO>
          <SUBJECT>Texoma.</SUBJECT>
          <SECTNO>9.186</SECTNO>
          <SUBJECT>Niagara Escarpment.</SUBJECT>
          <SECTNO>9.187</SECTNO>
          <SUBJECT>Covelo.</SUBJECT>
          <SECTNO>9.188</SECTNO>
          <SUBJECT>Horse Heaven Hills.</SUBJECT>
          <SECTNO>9.189</SECTNO>
          <SUBJECT>High Valley.</SUBJECT>
          <SECTNO>9.190</SECTNO>
          <SUBJECT>Red Hill Douglas County, Oregon.</SUBJECT>
          <SECTNO>9.191</SECTNO>
          <SUBJECT>Ramona Valley.</SUBJECT>
          <SECTNO>9.192</SECTNO>
          <SUBJECT>Wahluke Slope.</SUBJECT>
          <SECTNO>9.193</SECTNO>
          <SUBJECT>Rattlesnake Hills.</SUBJECT>
          <SECTNO>9.194</SECTNO>
          <SUBJECT>San Antonio Valley.</SUBJECT>
          <SECTNO>9.195</SECTNO>
          <SUBJECT>Alta Mesa.</SUBJECT>
          <SECTNO>9.196</SECTNO>
          <SUBJECT>Borden Ranch.</SUBJECT>
          <SECTNO>9.197</SECTNO>
          <SUBJECT>Clements Hills.</SUBJECT>
          <SECTNO>9.198</SECTNO>
          <SUBJECT>Cosumnes River.</SUBJECT>
          <SECTNO>9.199</SECTNO>
          <SUBJECT>Jahant.</SUBJECT>
          <SECTNO>9.200</SECTNO>
          <SUBJECT>Mokelumne River.</SUBJECT>
          <SECTNO>9.201</SECTNO>
          <SUBJECT>Sloughhouse.</SUBJECT>
          <SECTNO>9.202</SECTNO>
          <SUBJECT>Eola-Amity Hills.</SUBJECT>
          <SECTNO>9.203</SECTNO>
          <SUBJECT>Saddle Rock-Malibu.</SUBJECT>
          <SECTNO>9.204</SECTNO>
          <SUBJECT>Tracy Hills.</SUBJECT>
          <SECTNO>9.205</SECTNO>
          <SUBJECT>Chehalem Mountains.</SUBJECT>
          <SECTNO>9.206</SECTNO>
          <SUBJECT>Shawnee Hills.</SUBJECT>
          <SECTNO>9.207</SECTNO>
          <SUBJECT>Outer Coastal Plain.</SUBJECT>
          <SECTNO>9.208</SECTNO>
          <SUBJECT>Snake River Valley.</SUBJECT>
        </SUBPART>
      </CONTENTS>
      <AUTH>
        <HD SOURCE="HED">Authority:</HD>
        <P>27 U.S.C. 205.</P>
      </AUTH>
      <SOURCE>
        <HD SOURCE="HED">Source:</HD>
        <P>T.D. ATF-60, 44 FR 56692, Oct. 2, 1979, unless otherwise noted.</P>
      </SOURCE>
      <SUBPART>
        <HD SOURCE="HED">Subpart A—General Provisions</HD>
        <SECTION>
          <SECTNO>§ 9.1</SECTNO>
          <SUBJECT>Scope.</SUBJECT>
          <P>The regulations in this part relate to American viticultural areas.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.2</SECTNO>
          <SUBJECT>Territorial extent.</SUBJECT>
          <P>This part applies to the several States of the United States, the District of Columbia, and Puerto Rico.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.3</SECTNO>
          <SUBJECT>Relation to parts 4 and 70 of this chapter.</SUBJECT>
          <P>(a) <E T="03">Procedure.</E> In accordance with §§ 4.25a(e)(2) and 70.701(c) of this chapter, the Administrator shall receive petitions to establish American viticultural areas and shall use the informal rulemaking process, under 5 U.S.C. 553, in establishing viticultural areas in this part.</P>
          <P>(b) <E T="03">Information to establish an American viticultural area.</E> A petition, made in writing, shall contain the following information:</P>
          <P>(1) Evidence that the name of the viticultural area is locally and/or nationally known as referring to the area specified in the application;</P>
          <P>(2) Historical or current evidence that the boundaries of the viticultural area are as specified in the application;</P>
          <P>(3) Evidence relating to the geographical features (climate, soil, elevation, physical features, etc.) which distinguish the viticultural features of the proposed area from surrounding areas;</P>
          <P>(4) The specific boundaries of the viticultural area, based on features which can be found on United States Geological Survey (U.S.G.S.) maps of the largest applicable scale; and</P>
          <P>(5) A copy of the appropriate U.S.G.S. map(s) with the boundaries prominently marked. (For U.S.G.S. maps, write the U.S. Geological Survey, Branch of Distribution, Box 25286, Federal Center, Denver, Colorado 80225. If the map name is not known, request a map index by State.)</P>
          <CITA>[T.D. ATF-60, 44 FR 56692, Oct. 2, 1979, as amended by T.D. ATF-92, 46 FR 46913, Sept. 23, 1981; T.D. ATF -355, 59 FR 14553, Mar. 29, 1994; T.D. ATF-432, 65 FR 69253, Nov. 16, 2000]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart B—Definitions</HD>
        <SECTION>
          <SECTNO>§ 9.11</SECTNO>
          <SUBJECT>Meaning of terms.</SUBJECT>
          <P>As used in this part, unless the context otherwise requires, terms shall have the meaning ascribed in this section.</P>
          <P>
            <E T="03">Administrator.</E> The Administrator, Alcohol and Tobacco Tax and Trade Bureau, Department of the Treasury, Washington, DC.</P>
          <P>
            <E T="03">American.</E> Of or relating to the several States, the District of Columbia, and Puerto Rico; “State” includes the District of Columbia and Puerto Rico.</P>
          <P>
            <E T="03">Approved map.</E> The map used to define the boundaries of an approved viticultural area.</P>
          <P>
            <E T="03">Use of other terms.</E> Any other term defined in the Federal Alcohol Administration Act and used in this part shall <PRTPAGE P="114"/>have the same meaning assigned to it by the Act.</P>
          <P>
            <E T="03">U.S.G.S.</E> The United States Geological Survey.</P>
          <P>
            <E T="03">Viticultural area.</E> A delimited, grape-growing region distinguishable by geographical features, the boundaries of which have been delineated in subpart C of this part.</P>
          <CITA>[T.D. ATF-60, 44 FR 56692, Oct. 2, 1979, as amended by T.D. TTB-44, 71 FR 16923, Apr. 4, 2006]</CITA>
        </SECTION>
      </SUBPART>
      <SUBPART>
        <HD SOURCE="HED">Subpart C—Approved American Viticultural Areas</HD>
        <SECTION>
          <SECTNO>§ 9.21</SECTNO>
          <SUBJECT>General.</SUBJECT>
          <P>The viticultural areas listed in this subpart are approved for use as appellations of origin in accordance with part 4 of this chapter.</P>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.22</SECTNO>
          <SUBJECT>Augusta.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Augusta.”</P>
          <P>(b) <E T="03">Approved maps.</E> The approved maps for the Augusta viticultural area are two U.S.G.S. maps. They are titled:</P>
          <P>(1) “Washington East, Missouri”, 7.5 minute quadrangle; and</P>
          <P>(2) “Labadie, Missouri”, 7.5 minute quadrangle.</P>
          <P>(c) <E T="03">Boundaries.</E> The boundaries of the Augusta viticultural area are located in the State of Missouri and are as follows:</P>
          <P>(1) The beginning point of the boundary is the intersection of the St. Charles County line, the Warren County line and the Franklin County line.</P>
          <P>(2) The western boundary is the St. Charles County-Warren County line from the beginning point to the township line identified on the approved maps as “T45N/T44N.”</P>
          <P>(3) The northern boundary is the township line “T45N/T44N” from the St. Charles County-Warren County line to the range line identified on the approved maps as “R1E/R2E.”</P>
          <P>(4) The eastern boundary is the range line “R1E/R2E” from township line “T45N/T44N” extended to the St. Charles County-Franklin County line.</P>
          <P>(5) The southern boundary is the St. Charles County-Franklin County line from the extension of range line “R1E/R2E” to the beginning point.</P>
          <CITA>[T.D. ATF-72, 45 FR 41633, June 20, 1980]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.23</SECTNO>
          <SUBJECT>Napa Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Napa Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The maps showing the boundaries of the Napa Valley viticultural area are the:</P>
          <P>(1) “Mt. St. Helena” U.S.G.S. 7.5 minute quadrangle;</P>
          <P>(2) “Detert Reservoir” U.S.G.S. 7.5 minute quadrangle;</P>
          <P>(3) “St. Helena” U.S.G.S. 15 minute quadrangle;</P>
          <P>(4) “Jericho Valley” U.S.G.S. 7.5 minute quadrangle;</P>
          <P>(5) “Lake Berryessa” U.S.G.S. 15 minute quadrangle;</P>
          <P>(6) “Mt. Vaca” U.S.G.S. 15 minute quadrangle;</P>
          <P>(7) “Cordelia” U.S.G.S. 7.5 minute quadrangle;</P>
          <P>(8) “Cuttings Wharf” U.S.G.S. 7.5 minute quadrangle; and</P>
          <P>(9) Appropriate Napa County tax assessor's maps showing the Napa County-Sonoma County line.</P>
          <P>(c) <E T="03">Boundaries.</E> The Napa Valley viticultural area is located within Napa County, California. From the beginning point at the conjuction of the Napa County-Sonoma County line and the Napa County-Lake County line, the boundary runs along—</P>
          <P>(1) The Napa County-Lake County line;</P>
          <P>(2) Putah Creek and the western and southern shores of Lake Berryessa;</P>
          <P>(3) The Napa County-Solano County line; and</P>
          <P>(4) The Napa County-Sonoma County line to the beginning point.</P>
          <CITA>[T.D. ATF-79, 46 FR 9063, Jan. 28, 1981, as amended by T.D. ATF-201, 50 FR 12533, Mar. 29, 1985]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.24</SECTNO>
          <SUBJECT>Chalone.</SUBJECT>
          <P>(a) <E T="03">Name</E> The name of the viticultural area described in this section is “Chalone.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Chalone viticultural area are four U.S.G.S. 7.5 minute quadrangle maps. They are titled:<PRTPAGE P="115"/>
          </P>
          <P>(1) “Mount Johnson, California, 1968”;</P>
          <P>(2) “Bickmore Canyon, California, 1968”;</P>
          <P>(3) “Soledad, California, 1955”; and</P>
          <P>(4) “North Chalone Peak, California, 1969.”</P>
          <P>(c) <E T="03">Boundaries.</E> The Chalone viticultural area includes 8640 acres, primarily located in Monterey County, California, with small portions in the north and east located in San Benito County, California. The boundaries of the Chalone viticultural area encompass:</P>
          <P>(1) Sections 35 and 36, in their entirety, of T.16 S., R.6.E.;</P>
          <P>(2) Sections 1, 2 and 12, in their entirety, of T.17 S., R.6 E.;</P>
          <P>(3) Sections 6, 7, 8, 9, 16, and 17, in their entirety, the western half of Section 5, and the eastern half of Section 18 of T.17 S., R.7 E.; and</P>
          <P>(4) Section 31, in its entirety, and the western half of Section 32 of T.16 S., R.7 E.</P>
          <CITA>[T.D. ATF-107, 47 FR 25519, June 14, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.25</SECTNO>
          <SUBJECT>San Pasqual Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “San Pasqual Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries are three U.S.G.S. maps. They are entitled:</P>
          <P>(1) “Escondido Quadrangle, California—San Diego County”, 7.5 minute series;</P>
          <P>(2) “San Pasqual Quadrangle, California—San Diego County”, 7.5 minute series;</P>
          <P>(3) “Valley Center Quadrangle, California—San Diego County”, 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The San Pasqual Valley viticultural area is located in San Diego County, California.</P>
          <P>(1) From the beginning point at the intersection of Interstate 15 and the 500-foot contour line, north of the intersection of point of Interstate 15 and T.12 S./T.13 S., the boundary line follows the 500-foot contour line to;</P>
          <P>(2) The point nearest San Pasqual Road and the 500-foot contour line, the boundary line follows the Escondido Corporate Boundary line to the 500-foot contour line on the hillock and circumnavigates said hillock back to the Escondido Corporate Boundary line and returns to the 500-foot contour line nearest to San Pasqual Road and;</P>
          <P>(3) Continues along the 500-foot contour line completely around San Pasqual Valley to a point where the 500-foot contour line intersects with Pomerado Road, at this point, the boundary line, in a straight, northwesterly direction crosses over to;</P>
          <P>(4) The 500-foot contour line of Battle Mountain, following the 500-foot contour line around Battle Mountain to point nearest to Interstate 15, at which point the boundary line crosses over to Interstate 15; and</P>
          <P>(5) Continues northward along Interstate 15 to the point of beginning.</P>
          <CITA>[T.D. ATF-92, 46 FR 41493, Sept. 23, 1981]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.26</SECTNO>
          <SUBJECT>Guenoc Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Guenoc Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Guenoc Valley viticultural area are four USGS maps. They are titled:</P>
          <P>(1) “Middletown Quadrangle, California-Lake Co.,” 7.5 minute series;</P>
          <P>(2) “Jericho Valley Quadrangle, California,” 7.5 minute series;</P>
          <P>(3) “Detert Reservoir Quadrangle, California,” 7.5 minute series; and</P>
          <P>(4) “Aetna Springs Quadrangle, California,” 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Guenoc Valley viticultural area is located within Lake County, California. The beginning point of the boundary is Station 20 of Denton's Survey of Guenoc Rancho, presently marked by a 1<FR>1/2</FR> inch galvanized pipe located atop Jim Davis Peak. On the approved maps, Jim Davis Peak is the unnamed peak (elevation 1,455 feet) located on the western boundary of Section 35, Township 11 North, Range 6 West. From this beginning point the boundary runs:</P>
          <P>(1) South 07°49′34″ East, 9,822.57 feet to the USGS triangulation station “Guenoc;”</P>
          <P>(2) Then, South 29°14′31″ West, 10,325.08 feet;</P>
          <P>(3) Then, South 00°00′ West, 2,100.00 feet;</P>
          <P>(4) Then, North 90°00′ West, 4,150.00 feet;<PRTPAGE P="116"/>
          </P>
          <P>(5) Then, North 24°23′11″ West, 16,469.36 feet;</P>
          <P>(6) Then, North 75°47′20″ East, 7,943.08 feet; and</P>
          <P>(7) Then, North 60°47′00″ East, 7,970.24 feet to the beginning point.</P>
          <CITA>[T.D. ATF-95, 46 FR 56786, Nov. 19, 1981]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.27</SECTNO>
          <SUBJECT>Lime Kiln Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Lime Kiln Valley.”</P>
          <P>(b) <E T="03">Approved Map.</E> The appropriate map for determining the boundaries of the Lime Kiln Valley Viticultural area is: “Paicines Quadrangle, California,” 1968, 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Lime Kiln Valley viticultural area is located in San Benito County, California. From the beginning point at the intersection of Thompson Creek and Cienega Road, the boundary proceeds, in a straight line to the summit of an unnamed peak (1,288 feet) in the northwest quarter of Section 28, T.14 S./R.6 E.;</P>
          <P>(1) Thence in a straight line from the summit of the unnamed peak (1,288 feet) to a point where it intersects the 1,400-foot contour line, by the elevation marker, in the southwest quarter of T.14 S./R.6 E, Section 28;</P>
          <P>(2) Thence following the 1,400-foot contour line through the following sections; Sections 28, 29, and 30, T.14 S./R.6 E.; Section 25, T.14 S./R.5 E.; Sections 30, 19, 20, and returning to 19, T.14 S./R.6 E., to a point where the 1,400-foot contour line intersects with the section line between Sections 19 and 18, T.14 S./R.6 E.;</P>
          <P>(3) Thence in a straight line to the Cienega School Building along Cienega Road;</P>
          <P>(4) Thence along Cienega Road to the point of beginning.</P>
          <CITA>[T.D. ATF-106, 47 FR 24296, June 4, 1982, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.28</SECTNO>
          <SUBJECT>Santa Maria Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Santa Maria Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The approved maps for the Santa Maria Valley are two U.S.G.S. maps entitled:</P>
          <P>(1) “Santa Maria”, N.I. 10-6, 9, series V 502, scale 1: 250,000; and</P>
          <P>(2) “San Luis Obispo”, N.I. 10-3, series V 502, scale 1: 250,000.</P>
          <P>(c) <E T="03">Boundaries.</E> The boundaries of the Santa Maria Valley viticultural area are located in portions of Santa Barbara and San Luis Obispo Counties, California, and are as follows:</P>
          <P>(1) Beginning at a point east of Orcutt where Highway U.S. 101 and the unnamed road (known locally as Clark Road) intersects; Thence northerly along U.S. 101 to a point where it intersects with Highway 166;</P>
          <P>(2) Thence along Highway 166 in a general easterly direction to a point where Highway 166 intersects with the section line at the southwest section of Chimney Canyon;</P>
          <P>(3) Thence in a straight, southerly, line to the summit of Los Coches Mountain (3016 feet);</P>
          <P>(4) Thence in a straight, southeasterly, line to the summit of Bone Mountain (2822 feet);</P>
          <P>(5) Thence in a straight, south-southwesterly, line to the intersection of two unnamed roads (known locally as Alisos Canyon Road and Foxen Canyon Road) in Foxen Canyon at the elevation marker of 1116 feet;</P>
          <P>(6) Thence along the unnamed road (known locally as Foxen Canyon Road) in a northwesterly direction to the community of Sisquoc; and</P>
          <P>(7) Thence in a westerly direction along the unnamed road (known locally as Clark Road) to the point of beginning.</P>
          <CITA>[T.D. ATF-89, 46 FR 39812, Aug. 5, 1981, as amended by T.D. ATF-216, 50 FR 43130, Oct. 24, 1985]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.29</SECTNO>
          <SUBJECT>Sonoma Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Sonoma Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The maps showing the boundaries of the Sonoma valley viticultural area are entitled:</P>
          <P>(1) “Cuttings Wharf, Calif.”, 1949 (photorevised 1968 and photoinspected 1973), 7.5 minute quadrangle;</P>

          <P>(2) “Petaluma Point, Calif.”, 1959 (photorevised 1968 and photoinspected 1973), 7.5 minute quadrangle;<PRTPAGE P="117"/>
          </P>
          <P>(3) “Sears Point, Calif.”, 1951 (photorevised 1968), 7.5 minute quadrangle;</P>
          <P>(4) “Petaluma River, Calif.”, 1954 (photorevised 1968 and 1973), 7.5 minute quadrangle;</P>
          <P>(5) “Glen Ellen, Calif.”, 1954 (photorevised 1968 and photoinspected 1973), 7.5 minute quadrangle;</P>
          <P>(6) “Cotati, Calif.”, 1954 (photorevised 1968 and 1973), 7.5 minute quadrangle;</P>
          <P>(7) “Santa Rosa, Calif.”, 1954 (photorevised 1968 and 1973), 7.5 minute quadrangle;</P>
          <P>(8) “Kenwood, Calif.”, 1954 (photorevised 1968 and photoinspected 1973), 7.5 minute quadrangle; and</P>
          <P>(9) Appropriate Sonoma County tax assessor's maps showing the Sonoma County-Napa County line.</P>
          <P>(c) <E T="03">Boundaries.</E> The Sonoma Valley viticultural area is located within Sonoma County, California. From the beginning point at the junction of Tolay Creek and San Pablo Bay, the boundary runs:</P>
          <P>(1) Northerly along Tolay Creek to Highway 37;</P>
          <P>(2) Westerly along Highway 37 to its junction with Highway 121;</P>
          <P>(3) Northwesterly in a straight line to the peak of Wildcat Mountain;</P>
          <P>(4) Northwesterly in a straight line to Sonoma Mountain to the horizontal control station at elevation 2,271 feet;</P>
          <P>(5) Northwesterly in a straight line to the peak of Taylor Mountain;</P>
          <P>(6) Northeasterly in a straight line to the point at which Los Alamos Road joins Highway 12;</P>
          <P>(7) Easterly in a straight line to the peak of Buzzard Peak;</P>
          <P>(8) Easterly in a straight line to the peak of Mount Hood;</P>
          <P>(9) Easterly in a straight line to an unnamed peak located on the Sonoma County-Napa County line and identified as having an elevation of 2,530 feet (This unnamed peak is located in the northeast quarter of Section 9, Township 7 North, Range 6 West, Mt. Diablo Base and Meridian);</P>
          <P>(10) Southerly along the Sonoma County-Napa County line to the point at which Sonoma Creek enters San Pablo Bay; and</P>
          <P>(11) Southwesterly along the shore of San Pablo Bay to the beginning point.</P>
          <CITA>[T.D. ATF-96, 46 FR 59238, Dec. 4, 1981, as amended by T.D. ATF-201, 50 FR 12533, Mar. 29, 1985; T.D. ATF-249, 52 FR 5956, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.30</SECTNO>
          <SUBJECT>North Coast.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “North Coast.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the North Coast viticultural area are three U.S.G.S. maps. They are entitled:</P>
          <P>(1) “San Francisco, Cal.”, scaled 1:250,000, edition of 1956, revised 1980;</P>
          <P>(2) “Santa Rosa, Cal.”, scaled 1:250,000, edition of 1958, revised 1970; and</P>
          <P>(3) “Ukiah, Cal.”, scaled 1:250,000, edition of 1957, revised 1971.</P>
          <P>(c) <E T="03">Boundaries.</E> The North Coast viticultural area is located in Lake, Marin, Mendocino, Napa, Solano, and Sonoma Counties, California. The beginning point is found on the “Santa Rosa, California” U.S.G.S. map at the point where the Sonoma and Marin County boundary joins the Pacific Ocean.</P>
          <P>(1) Then east and southeast following the boundary between Marin and Sonoma Counties to the point where Estero Americano/Americano Creek crosses State Highway 1 east of Valley Ford;</P>
          <P>(2) Then southeast in a straight line for approximately 22.0 miles to the peak of Barnabe Mountain (elevation 1466 feet);</P>
          <P>(3) Then southeast in a straight line for approximately 10.0 miles to the peak of Mount Tamalpais (western peak, elevation 2604 feet);</P>
          <P>(4) Then northeast in a straight line for approximately 5.8 miles to the confluence of San Rafael Creek and San Rafael Bay in San Rafael;</P>
          <P>(5) Then north and northeast following San Rafael Bay and San Pablo Bay to Sonoma Creek;</P>
          <P>(6) Then north following Sonoma Creek to the boundary between Napa and Solano Counties;</P>

          <P>(7) Then east and north following the boundary between Napa and Solano Counties to the right-of-way of the <PRTPAGE P="118"/>Southern Pacific Railroad in Jameson Canyon;</P>
          <P>(8) Then east following the right-of-way of the Southern Pacific Railroad to the junction with the Southern Pacific in Suisun City;</P>
          <P>(9) Then north in a straight line for approximately 5.5 miles to the extreme southeastern corner of Napa County;</P>
          <P>(10) Then north following the boundary between Napa and Solano Counties to the Monticello Dam at the eastern end of Lake Berryessa;</P>
          <P>(11) Then following the south and west shore of Lake Berryessa to Putah Creek;</P>
          <P>(12) Then northwest following Putah Creek to the boundary between Napa and Lake Counties;</P>
          <P>(13) Then northwest in a straight line for approximately 11.4 miles to the peak of Brushy Sky High Mountain (elevation 3196 feet);</P>
          <P>(14) Then northwest in a straight line for approximately 5.0 miles to Bally Peak (elevation 2288 feet);</P>
          <P>(15) Then northwest in a straight line for approximately 6.6 miles to the peak of Round Mountain;</P>
          <P>(16) Then northwest in a straight line for approximately 5.5 miles to Evans Peak;</P>
          <P>(17) Then northwest in a straight line for approximately 5.0 miles to Pinnacle Rock Lookout;</P>
          <P>(18) Then northwest in a straight line for approximately 8.0 miles to Youngs Peak (elevation 3683 feet);</P>
          <P>(19) Then northwest in a straight line for approximately 11.2 miles to the peak of Pine Mountain (elevation 4057 feet);</P>
          <P>(20) Then northwest in a straight line for approximately 12.1 miles to the peak of Sanhedrin Mountain (elevation 6175 feet);</P>
          <P>(21) Then northwest in a straight line for approximately 9.4 miles to the peak of Brushy Mountain (elevation 4864 feet);</P>
          <P>(22) Then southwest in a straight line for approximately 17.6 miles to the confluence of Redwood Creek and the Noyo River;</P>
          <P>(23) Then west following the Noyo River to its mouth at the Pacific Ocean;</P>
          <P>(24) Then southeast following the Pacific Ocean shoreline to the point of beginning.</P>
          <CITA>[T.D. ATF-145, 48 FR 42977, Sept. 21, 1983]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.31</SECTNO>
          <SUBJECT>Santa Cruz Mountains.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Santa Cruz Mountains.”</P>
          <P>(b) <E T="03">Approved maps.</E> The 24 approved U.S.G.S. maps for determining the boundaries are 23 7.5 minute scale and one 5 × 11 minute scale.</P>
          <P>(1) “Ano Nuevo Quadrangle, California”;</P>
          <P>(2) “Big Basin Quadrangle, California”;</P>
          <P>(3) “Castle Rock Ridge Quadrangle, California”;</P>
          <P>(4) “Cupertino Quadrangle, California”;</P>
          <P>(5) “Davenport Quadrangle, California—Santa Cruz County”;</P>
          <P>(6) “Felton Quadrangle, California—Santa Cruz County”;</P>
          <P>(7) “Franklin Point Quadrangle, California”;</P>
          <P>(8) “Half Moon Bay Quadrangle, California—San Mateo County”;</P>
          <P>(9) “La Honda Quadrangle, California—San Mateo County”;</P>
          <P>(10) “Laurel Quadrangle, California”;</P>
          <P>(11) “Loma Prieta Quadrangle, California”;</P>
          <P>(12) “Los Gatos Quadrangle, California”;</P>
          <P>(13) “Mt. Madonna Quadrangle, California”;</P>
          <P>(14) “Mindego Hill Quadrangle, California”;</P>
          <P>(15) “Morgan Hill Quadrangle, California—Santa Clara County”;</P>
          <P>(16) “Palo Alto Quadrangle, California”;</P>
          <P>(17) “San Gregorio Quadrangle, California—San Mateo County”;</P>
          <P>(18) “San Mateo Quadrangle, California—San Mateo County”;</P>
          <P>(19) “Santa Teresa Hills Quadrangle—Santa Clara County”;</P>
          <P>(20) “Soquel Quadrangle, California—Santa Cruz County”;</P>
          <P>(21) “Watsonville East Quadrangle, California”;</P>
          <P>(22) “Watsonville West Quadrangle, California”;</P>

          <P>(23) “Woodside Quadrangle, California—San Mateo County”; and<PRTPAGE P="119"/>
          </P>
          <P>(24) One 5 × 11 minute series map entitled: “Santa Cruz, California.”</P>
          <P>(c) <E T="03">Boundaries.</E> The Santa Cruz Mountains viticultural area is located in portions of San Mateo, Santa Clara, and Santa Cruz Counties, California.</P>
          <P>(1) From the beginning point where Highway 92 and the 400-foot contour line intersect (Half Moon Bay Quadrangle), the boundary line follows Highway 92, beginning in a southeasterly direction, to a point where Highway 92 and the 400-foot contour line intersect (San Mateo Quadrangle);</P>
          <P>(2) Thence along the 400-foot contour line, beginning in a southeasterly direction, to a point where the 400-foot contour line and Canada Road intersect (Woodside Quadrangle);</P>
          <P>(3) Thence along Canada Road, beginning in a southerly direction, to a point where Canada Road and Highway 280 intersect (Woodside Quadrangle);</P>
          <P>(4) Thence along Highway 280, beginning in a southeasterly direction, to a point where Highway 280 and 84 intersect (Palo Alto Quadrangle);</P>
          <P>(5) Thence along Highway 84, beginning in a southwesterly direction, to a point where Highway 84 and Mountain Home Road intersect (Woodside Quadrangle);</P>
          <P>(6) Thence along Mountain Home Road, beginning in a southerly direction, to a point where Mountain Home Road and Portola Road intersect (Palo Alto Quadrangle);</P>
          <P>(7) Thence along Portola Road, beginning in a westerly direction, to a point where Portola Road and Highway 84 intersect (Woodside Quadrangle);</P>
          <P>(8) Thence along Highway 84, beginning in a southwesterly direction, to a point where Highway 84 and the 600-foot contour line intersect (Woodside Quadrangle);</P>
          <P>(9) Thence along the 600-foot contour line, beginning in a northeasterly direction, to a point where the 600-foot contour line and Regnart Road intersect (Cupertino Quadrangle);</P>
          <P>(10) Thence along Regnart Road, beginning in a northeasterly direction, to a point where Regnart Road and the 400-foot contour line intersect (Cupertino Quadrangle);</P>
          <P>(11) Thence along the 400-foot contour line, beginning in a southerly direction, to a point where the 400-foot contour line and the north section line of Section 35, T. 6 S./R. 2 W, intersect (Cupertino Quadrangle);</P>
          <P>(12) Thence along the north section line of Sections 35 and 36, in an easterly direction, to a point where the section line and Highway 85 intersect (Cupertino Quadrangle);</P>
          <P>(13) Thence along Highway 85, in a southerly direction, to a point where Highway 85 and the southern section line of Section 36 intersect (Cupertino Quadrangle);</P>
          <P>(14) Thence along the section line, in a westerly direction, to a point where the section line and the 600-foot contour line intersect (Cupertino Quadrangle);</P>
          <P>(15) Thence along the 600-foot contour line, beginning in a southerly direction, to a point where the 600-foot contour line and Pierce Road intersect (Cupertino Quadrangle);</P>
          <P>(16) Thence along Pierce Road, in a southerly direction, to a point where Pierce Road and the 800-foot contour line intersect (Cupertino Quadrangle);</P>
          <P>(17) Thence along the 800-foot line, beginning in a northwesterly direction, to a point where the 800-foot contour line and the east section line of Section 25, T. 10 S./R. 2 E., intersect (Mt. Madonna Quadrangle);</P>
          <P>(18) Thence along the east section line, in a southerly direction, to a point where this section line and the 800-foot contour line intersect (Mt. Madonna Quadrangle);</P>
          <P>(19) Thence along the 800-foot contour line, beginning in a southeasterly direction, to a point where the 800-foot contour line and Highway 152 intersect (Watsonville East Quadrangle);</P>
          <P>(20) Thence along Highway 152, in a southwesterly direction, to a point where Highway 152 and the 400-foot contour line intersect (Watsonville East Quadrangle);</P>
          <P>(21) Thence along the 400-foot contour line, beginning in a northwesterly direction, to a point where the 400-foot contour line and the Felton Empire Road intersect (Felton Quadrangle);</P>

          <P>(22) Thence along Felton Empire Road, in an easterly direction, to a point where Felton Empire Road and Highway 9 intersect (Felton Quadrangle);<PRTPAGE P="120"/>
          </P>
          <P>(23) Thence along Highway 9, in a southerly direction, to a point where Highway 9 and Bull Creek intersect (Felton Quadrangle);</P>
          <P>(24) Thence along Bull Creek, beginning in a southwesterly direction, to a point where Bull Creek and the 400-foot contour line intersect (Felton Quadrangle); and</P>
          <P>(25) Thence along the 400-foot contour line, beginning in a southeasterly direction, back to the point of beginning.</P>
          <CITA>[T.D. ATF-98, 46 FR 59240, Dec. 4, 1981]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.32</SECTNO>
          <SUBJECT>Los Carneros.</SUBJECT>
          <P>(a) <E T="03">Name</E>. The name of the viticultural area described in this section is “Los Carneros”. “Carneros” may also be used as the name of the viticultural area described in this section. For purposes of part 4 of this chapter, “Los Carneros” and “Carneros” are terms of viticultural significance.</P>
          <P>(b) <E T="03">Approved maps.</E> The approved maps for the Carneros viticultural area are the following U.S.G.S. maps:</P>
          <P>(1) “Sonoma Quadrangle, California,” 7.5 minute series (topographic), 1951 (photorevised 1968).</P>
          <P>(2) “Napa Quadrangle, California—Napa Co.,” 7.5 minute series (topographic), 1951 (photorevised 1968 and 1973).</P>
          <P>(3) “Cuttings Wharf Quadrangle, California,” 7.5 minute series (topographic), 1949 (photorevised 1968; photoinspected 1973).</P>
          <P>(4) “Sears Point Quadrangle, California,” 7.5 minute series (topographic), 1951 (photorevised 1968).</P>
          <P>(5) “Petaluma River Quadrangle,California—Sonoma Co.,” 7.5 minute series (topographic), 1954 (photorevised 1980).</P>
          <P>(6) “Glen Ellen Quadrangle, California—Sonoma Co.,” 7.5 minute series (topographic), 1954 (photorevised 1980).</P>
          <P>(c) <E T="03">Boundaries.</E> The boundaries of the Carneros viticultural area are located in Napa and Sonoma Counties, California, and are as follows:</P>
          <P>(1) The point of beginning is the intersection of highway 12/121 and the Napa County-Sonoma County line, near the extreme southeast corner of the Sonoma Quadrangle map.</P>
          <P>(2) From there, following the Napa County-Sonoma County line generally northwestward for about 1.6 miles to the summit of an unnamed hill with a marked elevation of 685 ft.</P>
          <P>(3) From there in a straight line northeastward to the summit of Milliken Peak (743 ft.), located on the Napa Quadrangle map.</P>
          <P>(4) From there due eastward to the 400 ft. contour line.</P>
          <P>(5) Then following that contour line generally northwestward to Carneros Creek (on the Sonoma Quadrangle map).</P>
          <P>(6) Then following the same contour line generally southeastward to the range line R. 5 W/R. 4 W (on the Napa Quadrangle map).</P>
          <P>(7) Then continuing to follow the same contour line generally northward for about one mile, till reaching a point due west of the summit of an unnamed hill having a marked elevation of 446 ft. (That hill is about .8 mile southwest of Browns Valley School.)</P>
          <P>(8) From that point due eastward to the summit of that hill.</P>
          <P>(9) From there in a straight line northeastward across Buhman Avenue to the summit of an unnamed hill having a marked elevation of 343 ft.</P>
          <P>(10) From there due eastward to the Napa-Entre Napa land grant boundary.</P>
          <P>(11) Then northeastward along that land grant boundary to Browns Valley Road.</P>
          <P>(12) Then eastward along Browns Valley Road to Highway 29.</P>
          <P>(13) Then southward along Highway 29 to Imola Avenue.</P>
          <P>(14) Then eastward along Imola Avenue to the Napa River.</P>
          <P>(15) Then generally southward along the west bank of the Napa River to the Southern Pacific Railroad tracks.</P>
          <P>(16) Then generally westward and northwestward along the Southern Pacific Railroad tracks to their intersection with the township line T. 5 N./T. 4 N. (on the Sears Point Quadrangle map).</P>
          <P>(17) From there due westward to the Northwestern Pacific Railroad tracks.</P>

          <P>(18) Then generally southward along the Northwestern Pacific Railroad tracks to Highway 37.<PRTPAGE P="121"/>
          </P>
          <P>(19) The westward along Highway 37 to its intersection with Highway 121.</P>
          <P>(20) From there northwestward in a straight line to the summit of Wildcat Mountain (682 ft.).</P>
          <P>(21) From there northwestward, following a straight line toward the summit of Sonoma Mountain (2295 ft.—on the Glenn Ellen Quadrangle map) till reaching a point due west of the intersection of Lewis Creek with the 400-ft. contour line. (That point is about 4<FR>1/3</FR> miles southeast of Sonoma Mountain.)</P>
          <P>(22) From that point due eastward to Lewis Creek.</P>
          <P>(23) Then generally southeastward along Lewis Creek to Felder Creek.</P>
          <P>(24) Then generally eastward along Felder Creek to Leveroni Road (on the Sonoma Quadrangle map).</P>
          <P>(25) Then generally eastward along Leveroni Road to Napa Road.</P>
          <P>(26) Then eastward and southeastward along Napa Road to Highway 12/121.</P>
          <P>(27) Then eastward along Highway 12/121 to the starting point.</P>
          <CITA>[T.D. ATF-142, 48 FR 37368, Aug. 18, 1983, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987; T.D. TTB-55, 71 FR 66455, Nov. 15, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.33</SECTNO>
          <SUBJECT>Fennville.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Fennville.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Fennville Viticultural Area are three U.S.G.S. maps. They are entitled:</P>
          <P>(1) “Fennville Quadrangle, Michigan-Allegan County,” 15 minute series;</P>
          <P>(2) “Bangor Quadrangle, Michigan,” 15 minute series; and</P>
          <P>(3) “South Haven Quadrangle, Michigan,” 15 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Fennville viticultural area is primarily located in the southwestern portion of Allegan County, Michigan, with a small finger extending into the northwest corner of Van Buren County, Michigan.</P>
          <P>(1) The western boundary is the eastern shore of Lake Michigan, extending from the Black River, at the City of South Haven, north to the Kalamazoo River.</P>
          <P>(2) The northern boundary is the Kalamazoo River, extending easterly from Lake Michigan to 86°5′ west longitude.</P>
          <P>(3) The eastern boundary is the 86°5′ west longitude meridian, extending from the Kalamazoo River to the intersection of the Middle Fork of the Black River.</P>
          <P>(4) The southern boundary is the Middle Fork of the Black River extending westerly from 86°5′ west longitude until it joins the Black River, continuing west along the Black River to the eastern shore of Lake Michigan.</P>
          <CITA>[T.D. ATF-91, 46 FR 46320, Sept. 18, 1981]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.34</SECTNO>
          <SUBJECT>Finger Lakes.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Finger Lakes.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Finger Lakes viticultural area are two U.S.G.S. maps scaled 1:250,000. They are entitled:</P>
          <P>(1) “Rochester,” Location diagram NK 18-1, 1961; and</P>
          <P>(2) “Elmira,” Location diagram NK 18-4, 1968.</P>
          <P>(c) <E T="03">Boundaries.</E> The boundaries of the Finger Lakes viticultural area, based on landmarks and points of reference found on the approved maps, are as follows:</P>
          <P>(1) Starting at the most northwest point, the intersection of the Erie Canal and the north/south Conrail line south of the City of Rochester.</P>
          <P>(2) Then east along the course of the Erie Canal approximately 56 miles (45 miles due east) to the intersection of New York State Highway 89 (NY-89).</P>
          <P>(3) Then south on NY-89 four miles to the intersection of highway US-20.</P>
          <P>(4) Then east on US-20 for 36 miles to the intersection of interstate 81 (I-81).</P>
          <P>(5) Then south along I-81 for ten miles to NY-281.</P>
          <P>(6) Then south along NY-281 for 20 miles around the western city limits of Cortland where NY-281 becomes NY-13.</P>
          <P>(7) Then continuing southwest on NY-13 (through the cities of Dryden and Ithaca) approximately 36 miles to the intersection of NY-224.</P>
          <P>(8) Then due west one mile to the southern boundary of Schuyler County.</P>

          <P>(9) Then continuing west along this county line 20 miles to the community of Meads Creek.<PRTPAGE P="122"/>
          </P>
          <P>(10) Then north along the Schuyler-Steuben county line four miles to the major east-west power line.</P>
          <P>(11) Then west along the power line for eight miles to the intersection of NY-17 (four miles southeast of the community of Bath).</P>
          <P>(12) Then northwest on NY-17 approximately nine miles to the intersection of I-390.</P>
          <P>(13) Then northwest on I-390 for 21 miles to the intersection of NY-36.</P>
          <P>(14) Then north for two miles through the community of Dansville to NY-63.</P>
          <P>(15) Then northwest on NY-63 approximately 18 miles to the intersection of NY-39, just south of Genesco.</P>
          <P>(16) Then north on NY-39 nine miles to the intersection where the west and north/south Conrail lines meet at the community of Avon.</P>
          <P>(17) Then north along the north/south Conrail line for 15 miles to the beginning point at the intersection of the Erie Canal.</P>
          <CITA>[T.D. ATF-113, 47 FR 38518, Sept. 1, 1982, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.35</SECTNO>
          <SUBJECT>Edna Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Edna Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Edna Valley viticultural area for four U.S.G.S. maps, They are titled:</P>
          <P>(1) “San Luis Obispo Quadrangle, California—San Luis Obispo Co.,” 7.5 minute series;</P>
          <P>(2) “Lopez Mtn, Quadrangle, California—San Luis Obispo Co.,” 7.5 minute series;</P>
          <P>(3) “Pismo Beach Quadrangle, California—San Luis Obispo Co.,” 7.5 minute series; and</P>
          <P>(4) “Arroyo Grande NE Quadrangle, California—San Luis Obispo Co.”, 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Edna Valley viticultural area is located in San Luis Obispo County, California. The beginning point is Cuesta Canyon County Park, located on U.S.G.S. map “San Luis Obispo Quadrangle” at the north end of Section 25, Township 30 South, Range 12 East.</P>
          <P>(1) From the beginning point, the boundary runs southwesterly along San Luis Obispo Creek to a point .7 mile southerly of the confluence with Davenport Creek;</P>
          <P>(2) Thence due east to the intersection with the 400-foot contour line of the northeastern flank of the San Luis Range;</P>
          <P>(3) Thence in a generally easterly and then a southeasterly direction along this 400-foot contour line of the northeastern flank of the San Luis Range, which forms the southwestern rim of Edna Valley, to the township line identified as “T31S/T32S” on the U.S.G.S. map;</P>
          <P>(4) Thence east along township line “T31S/T32S”, across Price Canyon to Tiber;</P>
          <P>(5) Thence in a generally easterly direction along the 400-foot contour line of Tiber Canyon and the southern rim of Canada Verde, crossing Corbit Canyon Road and continuing along the 400-foot contour line to longitude line 120°32′30″;</P>
          <P>(6) Thence north along longitude line 120°32′30″ to the 600-foot contour line of the southwestern flank of the Santa Lucia Mountain Range;</P>
          <P>(7) Thence in a generally northwesterly direction along the 600-foot contour line of the southwestern flank of the Santa Lucia Range to Cuesta Canyon County Park, the beginning point.</P>
          <CITA>[T.D. ATF-101, 47 FR 20299, May 12, 1982, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.36</SECTNO>
          <SUBJECT>McDowell Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “McDowell Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate map for determining the boundaries of the McDowell Valley viticultural area is a USGS map. That map is titled: “Hopland Quadrangle California” 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> (1) Beginning at the northwest corner of Section 22 T13N R11W.</P>

          <P>(2) Then southerly along the section line between Sections 22 and 21 approximately 1700 feet to the intersection of the section line and the ridge line (highest elevation line) between the McDowell Creek Valley and the Dooley Creek Valley.<PRTPAGE P="123"/>
          </P>
          <P>(3) Then southeasterly along the ridge line (highest elevation line) to the intersection of the ridge line and the 1000-foot contour line in Section 27.</P>
          <P>(4) Then southeasterly and on the McDowell Creek Valley side of the ridge along the 1000-foot contour line to the intersection of the 1000-foot contour line and the south section line of Section 27.</P>
          <P>(5) Then easterly along the section line between Sections 27 and 34 and between Sections 26 and 35 to the intersection of the section line and the centerline of Younce Road.</P>
          <P>(6) Then southeasterly and then northeasterly along Younce Road to the intersection of Younce Road and the section line between Sections 26 and 35.</P>
          <P>(7) Then due north from the section line, across Coleman Creek approximately 1250 feet, to the 1000-foot contour line.</P>
          <P>(8) Then westerly and then meandering generally to the north and east along the 1000-foot contour line to the intersection of the 1000-foot contour line and section line between Sections 26 and 25.</P>
          <P>(9) Then continuing along the 1000-foot countour line easterly and then northwesterly in Section 25 to the intersection of the 1000-foot contour line and the section line between Sections 26 and 25.</P>
          <P>(10) Then northerly along the 1000-foot contour line to the intersection of the 1000-foot contour line and the section line between Sections 23 and 24.</P>
          <P>(11) Then northerly along the section line across State Highway 175 approximately 1000 feet to the intersection of the section line and the 1000-foot contour line.</P>
          <P>(12) Then generally to the northwest along the 1000-foot contour line through Sections 23 and 14 and into Section 15 to the intersection of the 1000-foot contour line and the flowline of an unnamed creek near the northeast corner of Section 15.</P>
          <P>(13) Then southwesterly and down stream along the flowline of said unnamed creek and across Section 15, to the stream's intersection with the section line between Sections 15 and 16.</P>
          <P>(14) Then southerly along the section approximately 100 feet to the northwest corner of Section 22 and to the point of beginning.</P>
          <CITA>[T.D. ATF-97, 46 FR 59243, Dec. 4, 1981, as amended by T.D. ATF-249, 52 FR 5956, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.37</SECTNO>
          <SUBJECT>California Shenandoah Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Shenandoah Valley” qualified by the word “California” in direct conjunction with the name “Shenandoah Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the California Shenandoah Valley viticultural area are two 1962 U.S.G.S. maps. The maps are titled: “Fiddletown Quadrangle California” 7.5 minute series and “Amador City Quadrangle California-Amador Co.” 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Shenandoah Valley viticultural Area is located in portions of Amador and El Dorado Counties of California. The boundaries are as follows:</P>
          <P>(1) Beginning at the point where the Consumnes River meets Big Indian Creek.</P>
          <P>(2) Then south, following Big Indian Creek, until Big Indian Creek meets the boundary between Sections 1 and 2 of Township 7 North Range 10 East.</P>
          <P>(3) Then following this boundary south until it meets the Oleta (Fiddletown) Road.</P>
          <P>(4) Then following the Oleta Road east until it meets the boundary between Sections 6 and 5 of Township 7 North Range 11 East.</P>
          <P>(5) Then following that boundary north into Township 8 North Range 11 East, and continues north on the boundary between Sections 31 and 32 until this boundary meets Big Indian Creek.</P>
          <P>(6) Then following Big Indian Creek in a northeasterly direction until Big Indian Creek meets the boundary between Sections 28 and 27 of Township 8 North Range 11 East.</P>
          <P>(7) Then following this boundary north until it reaches the southeast corner of Section 21 of Township 8 North Range 11 East.</P>

          <P>(8) The boundary then proceeds east, then north, then west along the boundary of the western half of Section 22 of <PRTPAGE P="124"/>Township 8 North Range 11 East to the intersection of Sections 16, 15, 21, and 22.</P>
          <P>(9) Then proceeding north along the boundary line between Sections 16 and 15 of Township 8 North Range 11 East and continues north along the boundary of Sections 9 and 10 of Township 8 North Range 11 East to the intersection of Sections 9, 10, 3, and 4 of Township 8 North Range 11 East.</P>
          <P>(10) Then proceeding west along the boundary of Sections 9 and 4.</P>
          <P>(11) Then continuing west along the boundary of Sections 5 and 8 of Township 8 North Range 11 East to the Consumnes River.</P>
          <P>(12) Then the boundary proceeds west along the Consumnes River to the point of the beginning.</P>
          <CITA>[T.D. ATF-121, 47 FR 57696, Dec. 28, 1982, as amended by T.D. ATF-249, 52 FR 5957, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.38</SECTNO>
          <SUBJECT>Cienega Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Cienega Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Cienega Valley viticultural area are four U.S.G.S. maps. They are titled:</P>
          <P>(1) “Hollister Quadrangle, California,” 7.5 minute series (1971);</P>
          <P>(2) “Tres Pinos Quadrangle, California,” 7.5 minute series (1971);</P>
          <P>(3) “Mt. Harlan Quadrangle, California,” 7.5 minute series (1968); and</P>
          <P>(4) “Paicines Quadrangle, California,” 7.5 minute series (1968).</P>
          <P>(c) <E T="03">Boundaries.</E> The Cienega Valley viticultural area is located in San Benito County, California. The beginning point is the Gaging Station, located on U.S.G.S. map “Paicines Quadrangle” in the southeast portion of Section 21, Township 14 South, Range 6 East.</P>
          <P>(1) From the beginning point, the boundary follows the Pescadero Creek Bed in a southeasterly direction about 100 feet to the unimproved road and continues southwesterly on the unimproved road .5 mile to where it intersects with the south border of Township 14 South, Range 6 East, Section 21;</P>
          <P>(2) Thence in a straight line to the southwest portion of Section 28, Township 14 South, Range 6 East, where the 1400-foot contour line intersects the south border of Section 28;</P>
          <P>(3) Thence following the 1400-foot contour line through the following sections; Sections 28, 29, and 30, Township 14 South, Range 6 East; Section 25, Township 14 South, Range 5 East; Sections 30, 19, 20, and returning to 19, Township 14 South, Range 6 East, to a point where the 1400-foot contour line intersects with the section line between Sections 19 and 18, Township 14 South, Range 6 East;</P>
          <P>(4) Thence in a straight line due north to the intersection with the 1200-foot contour line in Section 18, Township 14 South, Range 6 East;</P>
          <P>(5) Thence following the 1200-foot contour line in a generally northwesterly direction to where it intersects with the north boundary of Township 14 South, Range 5 East, Section 10; then following this boundary line in a northwesterly direction to where this boundary intersects with the 1600-foot contour line; thence following the 1600-foot contour line in a generally northerly direction to where it intersects with the unimproved road;</P>
          <P>(6) Thence looping southward along the unimproved road and continuing on in an easterly direction past the designated “Spring” and then in a northeasterly direction parallel with the Gulch to the Vineyard School on Cienega Road; thence in a southeasterly direction on Cienega Road .4 mile to where the unimproved road intersects; thence traveling north and following the unimproved road in a northwesterly direction about 5. mile; then looping in an easterly direction .75 mile to the intersection of the unimproved road and branching in a southeasterly direction;</P>
          <P>(7) Thence crossing Township 13 South to Township 14 South and following the unimproved road to the intersection of the western border of Township 14 South, Range 6 East, Section 6; thence south to the northwest corner of Section 7;</P>

          <P>(8) Thence continuing in a straight diagonal line to the southeast corner of Township 14 South, Range 6 East, Section 7; thence from the southeast corner of Section 7 .25 mile west to where it intersects with an unimproved road;<PRTPAGE P="125"/>
          </P>
          <P>(9) Thence following this unimproved road in a southeasterly direction to the Gaging Station, the point of beginning.</P>
          <CITA>[T.D. ATF-109, 47 FR 36126, Aug. 19, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.39</SECTNO>
          <SUBJECT>Paicines.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Paicines.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Paicines viticultural area are the three U.S.G.S. maps. They are titled:</P>
          <P>(1) “Tres Pinos Quadrangle, California,” 7.5 minute series (1971);</P>
          <P>(2) “Paicines Quadrangle, California,” 7.5 minute series (1968); and</P>
          <P>(3) “Cherry Peak Quadrangle, California,” 7.5 minute series (1968).</P>
          <P>(c) <E T="03">Boundaries.</E> The Paicines viticultural area is located in San Benito County, California. The beginning point is the northwestern-most point of the proposed area at Township 14 South, Range 6 East, Section 3, northwest corner, located on U.S.G.S. map “Tres Pinos Quadrangle.”</P>
          <P>(1) From the beginning point the boundary runs east along the north border of Sections 3, 2, and 1, Township 14 South, Range 6 East;</P>
          <P>(2) Thence south along the east border of Section 1, Township 14 South, Range 6 East; thence east along the north border of Section 7, Township 14 South, Range 7 East; thence south along the east border of Section 7, Township 14 South, Range 7 East;</P>
          <P>(3) Thence continuing south along the east border of Section 18, Township 14 South, Range 7 East; thence east along the north border of Section 20, Township 14 South, Range 7 East; thence south along the east border of Sections 20, 29 and 32, Township 14 South, Range 7 East;</P>
          <P>(4) Thence continuing south along the east border of Section 5, Township 15 South, Range 7 East; thence south along the east border of Sections 8 and 17, Township 15 South, Range 7 East to latitude line 36°37′30″;</P>
          <P>(5) Thence west along latitude line 36°37′30″ to the west border of Section 18, Township 15 South, Range 7 East;</P>
          <P>(6) Thence north along the west border of Sections 18 and 7, Township 15 South, Range 7 East; thence west along the south border of Section 1, Township 15 South, Range 6 East; thence north along the west border of Section 1, Township 15 South, Range 6 East to the 800-foot elevation contour line and then in a generally northwest direction along this 800-foot contour line to where it intersects with the south border of Section 35, Township 14 South, Range 6 East;</P>
          <P>(7) Thence west along the south border of Section 35, Township 14 South, Range 6 East; thence north along the east border of Section 34, Township 14 South, Range 6 East; thence in a northwest direction along the northeast border of Section 34, Township 14 South, Range 6 East; thence continuing in a northwest direction along the east border of Section 27, Township 14 South, Range 6 East;</P>
          <P>(8) Thence continuing in a northwest direction to the northeast border of Section 22, Township 14 South, Range 6 East to where an unnamed, unimproved dirt road intersects the northeast border; thence east and then northwest along the unimproved dirt road to the intersection with the San Benito River; thence following the San Benito River and meandering north to the intersection with the east border of Section 4, Township 14 South, Range 6 East;</P>
          <P>(9) Thence continuing north along the east border of Section 4, Township 14 South, Range 6 East to the point of beginning.</P>
          <CITA>[T.D. ATF-108, 47 FR 35481, Aug. 16, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.40</SECTNO>
          <SUBJECT>Leelanau Peninsula.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Leelanau Peninsula.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Leelanau Peninsula viticultural area are four U.S.G.S. maps. They are entitled:</P>
          <P>(1) “Empire Quadrangle, Michigan,” 15 minute series;</P>
          <P>(2) “Maple City Quadrangle, Michigan,” 15 minute series;</P>
          <P>(3) “Traverse City Quadrangle, Michigan,” 15 minute series; and</P>
          <P>(4) “Northport Quadrangle, Michigan,” 15 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Leelanau Peninsula viticultural area encompasses all <PRTPAGE P="126"/>of Leelanau County, Michigan, excluding the offshore islands.</P>
          <CITA>[T.D. ATF-99, 47 FR 13329, Mar. 30, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.41</SECTNO>
          <SUBJECT>Lancaster Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Lancaster Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Lancaster Valley viticultural area are two U.S.G.S. maps. They are entitled:</P>
          <P>(1) “Lancaster County, Pennsylvania”, scaled 1:50,000, edition of 1977; and</P>
          <P>(2) “Honey Brook Quadrangle”, 7.5 minute series, edition of 1955, photorevised 1969 and 1974.</P>
          <P>(c) <E T="03">Boundaries.</E> The Lancaster Valley viticultural area is located in Lancaster County and Chester County, Pennsylvania. The beginning point is where Pennsylvania Highway 23 crosses the Lancaster and Berks County boundary.</P>
          <P>(1) Then in a southeasterly direction following the Lancaster County boundary for approximately 0.9 mile to the 500 foot contour line immediately south of the Conestoga River.</P>
          <P>(2) Then following the 500 foot contour in a southwesterly direction to the Caernarvon-East Earl Township boundary.</P>
          <P>(3) Then south approximately 0.1 mile following the Caernarvon-East Earl Township boundary to U.S. Highway 322.</P>
          <P>(4) Then west following U.S. Highway 322 for approximately 1.7 miles to the electric transmission line between Fetterville and Cedar Grove School.</P>
          <P>(5) Then southwest in a straight line for approximately 5.2 miles to the intersection of Earl, Upper Leacock, and Leacock Townships at the Mill Creek.</P>
          <P>(6) Then southeast following the boundary between Earl Township and Leacock Township to the point where Earl, East Earl, Salisbury, and Leacock Townships intersect.</P>
          <P>(7) Then east in a straight line for approximately 4.8 miles to the point where the 500 foot contour line intersects Pequea Creek northwest of Mt. Pleasant School.</P>
          <P>(8) Then following the 500 foot contour line past Cole Hill through the town of Gap and along Mine Ridge to the 76°07′30″ west longitude line in Paradise Township.</P>
          <P>(9) Then southwest in a straight line for approximately 7.7 miles to the Boehm Church south of Willow Street.</P>
          <P>(10) The northwest in a straight line for approximately 1.2 miles to the township school in West Willow.</P>
          <P>(11) Then west in a straight line for 4.2 miles to the confluence of Stehman Run and the Conestoga River.</P>
          <P>(12) Then northwest in a straight line for approximately 0.5 mile to the confluence of Indian Run and Little Conestoga Creek.</P>
          <P>(13) Then west following Indian Run for approximately 3.6 miles to the source of the more northerly branch.</P>
          <P>(14) Then northwest in a straight line for approximately 0.25 mile to the source of Wisslers Run.</P>
          <P>(15) Then west following Wisslers Run downstream for approximately 0.7 mile to the 300 foot contour line.</P>
          <P>(16) Then north following the 300 foot contour line to its intersection with Pennsylvania Highway 999 in Washington Boro.</P>
          <P>(17) Then east following Pennsylvania Highway 999 to the school in Central Manor.</P>
          <P>(18) Then northeast in a straight line for approximately 2.7 miles to the point where the West Branch of the Little Conestoga Creek intersects with Pennsylvania Highway 462.</P>
          <P>(19) Then west following Pennsylvania Highway 462 for approximately 1.5 miles to Strickler Run.</P>
          <P>(20) Then following Strickler Run southwest to the Columbia municipal boundary.</P>
          <P>(21) Then north following the eastern boundary of Columbia to Shawnee Run.</P>
          <P>(22) Then northeast in a straight line for approximately 5.8 miles to the intersection of Pennsylvania Highway 23 and Running Pump Road [unnamed on map] at elevation check point 436 near Centerville.</P>
          <P>(23) Then east following Pennsylvania Highway 23 for approximately 0.5 mile to the 400 foot contour line.</P>

          <P>(24) Then following the 400 foot contour line north around Chestnut Ridge, past Millers Run and continuing until <PRTPAGE P="127"/>the 400 foot contour line intersects an unnamed stream.</P>
          <P>(25) Then due south in a straight line for approximately 0.8 mile to Pennsylvania Highway 23.</P>
          <P>(26) Then west following Pennsylvania Highway 23 to the intersection with Pennsylvania Highway 441 at Marietta.</P>
          <P>(27) Then west following Pennsylvania Highway 441 to Pennsylvania Highway 241 near Bainbridge.</P>
          <P>(28) Then northwest in a straight line for approximately 5.5 miles to the point where the Consolidated Railroad Corporation crosses the West Donegal-Mount Joy Township boundary in Rheems.</P>
          <P>(29) Then east in a straight line for approximately 3.3 miles to the Mt. Pleasant Church.</P>
          <P>(30) Then east in a straight line for approximately 3.8 miles to the Erismans Church.</P>
          <P>(31) Then east in a straight line for approximately 3.3 miles to the point where the 400 foot contour line crosses Pennsylvania Highway 72 south of Valley View.</P>
          <P>(32) Then following the 400 foot contour line east to Pennsylvania Highway 501.</P>
          <P>(33) Then east in a straight line for approximately 2.9 miles to the Union Meetinghouse.</P>
          <P>(34) Then southeast in a straight line for approximately 1.0 miles to the point where Pennsylvania Highway 272 (indicated as U.S. Highway 222 on the map) crosses Cocalico Creek (which forms the boundary between West Earl and Warwick Townships).</P>
          <P>(35) Then northwest following the West Earl Township boundary to its intersection with U.S. Highway 322 southeast of Ephrata.</P>
          <P>(36) Then east in a straight line for approximately 3.4 miles to the Lincoln Independence School.</P>
          <P>(37) Then southeast in a straight line for approximately 1.7 miles to the West Terre Hill School.</P>
          <P>(38) Then east in a straight line for approximately 8.5 miles to the beginning point.</P>
          <CITA>[T.D. ATF-102, 47 FR 20301, May 12, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.42</SECTNO>
          <SUBJECT>Cole Ranch.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Cole Ranch.”</P>
          <P>(b) <E T="03">Approved map.</E> The approved map for the Cole Ranch viticultural area is the U.S.G.S. map entitled “Elledge Peak Quadrangle California—Mendocino County,” 7.5 minute series (topographic), 1958.</P>
          <P>(c) <E T="03">Boundaries.</E> The boundaries of the Cole Ranch viticultural area are located in Mendocino County California and are as follows:</P>
          <P>(1) The point of beginning is the intersection of the 1480-foot-elevation contour line with the Boonville-Ukiah Cutoff Road near the southest coner of section 13;</P>
          <P>(2) The Boundary follows the 1480-foot-elevation contour line southerly, then easterly, within section 24, then easterly and northwesterly within section 19 to its first intersection with this section line. The boundary proceeds due west on the north section line of section 19 until it intersects with the Boonville-Ukiah Cutoff Road;</P>
          <P>(3) The boundary follows this road northwesterly to the point of beginning.</P>
          <CITA>[T.D. ATF-130, 48 FR 16248, Apr. 15, 1983]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.43</SECTNO>
          <SUBJECT>Rocky Knob.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Rocky Knob.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Rocky Knob viticultural area are two 1968 U.S.G.S. maps. The maps are entitled: “Willis Quadrangle Virginia” 7.5 minute series and “Woolwine Quadrangle Virginia” 7.5 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> The Rocky Knob viticultural area is located in Floyd and Patrick Counties in southern Virginia. The boundaries are as follows:</P>
          <P>(1) The beginning point is the intersection of Virginia State Route Nos. 776 and 779 at Connors Grove.</P>
          <P>(2) Then follow State Route No. 779 south and east to the Blue Ridge Parkway.</P>

          <P>(3) Then south on the parkway to its first intersection with State Route No. 758.<PRTPAGE P="128"/>
          </P>
          <P>(4) Then follow State Route No. 758 east to the intersection of State Route No. 726 at the southern boundary of the Rocky Knob Recreation Area.</P>
          <P>(5) Then follow the boundary of the Rocky Knob Recreation Area south then in a northeastern direction to where the boundary first intersects State Route No. 8.</P>
          <P>(6) Then from that point at State Route No. 8, proceed northeast in a straight line to State Route No. 719 and Widgeon Creek at a point about 0.7 of a mile west of the intersection of State Route Nos. 719 and 710.</P>
          <P>(7) Then proceed northwest in a straight line to the intersection with State Route No. 710 and the Blue Ridge Parkway.</P>
          <P>(8) Then follow the Parkway southwest to the intersection with State Route No. 726.</P>
          <P>(9) Then turn right on State Route No. 726 and proceed 0.6 of a mile to a roadway at the 3308 elevation point on the map.</P>
          <P>(10) Then from that point, proceed west in a straight line back to the starting point at Connors Grove.</P>
          <CITA>[T.D. ATF-124, 48 FR 1293, Jan. 12, 1983, as amended by T.D. ATF-249, 52 FR 5957, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.44</SECTNO>
          <SUBJECT>Solano County Green Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Green Valley” qualified by the words “Solano County” in direct conjunction with the name “Green Valley.” On a label the words “Solano County” may be reduced in type size to the minimum allowed in 27 CFR 4.38(b).</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Green Valley viticultural area are two U.S.G.S. maps. They are titled:</P>
          <P>(1) “Mt. George Quadrangle, California”, 7.5 minute series (1968); and</P>
          <P>(2) “Cordelia Quadrangle, California”, 7.5 minute series (1968).</P>
          <P>(c) <E T="03">Boundaries.</E> The Green Valley viticultural area is located in Solano County, California. The beginning point is the intersection of the township line identified as T6N/T5N with the westernmost point of the Solano County/Napa County line on the north border of Section 4, located on U.S.G.S. map “Mt. George Quadrangle.”</P>
          <P>(1) From the beginning point, the boundary runs in a southerly direction along the Napa/Solano County border to State Road 12;</P>
          <P>(2) Thence east along State Road 12 to where it intersects with Interstate 80;</P>
          <P>(3) Thence southwest on Interstate 80 to where it intersects with the Southern Pacific Railroad track;</P>
          <P>(4) Thence in an easterly direction along the Southern Pacific Railroad track to where it intersects with range line “R3W/R2W”;</P>
          <P>(5) Thence due north on range line “R3W/R2W” to where it intersects with the Solano County/Napa County line;</P>
          <P>(6) Thence due west along the Solano County/Napa County line to the point of beginning.</P>
          <CITA>[T.D. ATF-122, 47 FR 37922, Dec. 29, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.45</SECTNO>
          <SUBJECT>Suisun Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Suisun Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Suisun Valley viticultural area are four U.S.G.S. maps. They are titled:</P>
          <P>(1) “Mt. George Quadrangle, California”, 7.5 minute series (1968);</P>
          <P>(2) “Fairfield North Quadrangle, California”, 7.5 minute series (1973);</P>
          <P>(3) “Fairfield South Quadrangle, California”, 7.5 minute series (1968); and</P>
          <P>(4) “Cordelia Quadrangle, California”, 7.5 minute series (1968).</P>
          <P>(c) <E T="03">Boundaries.</E> The Suisun Valley viticultural area is located in Solano County, California. The beginning point is the intersection of the Southern Pacific Railroad track with range line “R3W/R2W” in the town of Cordelia, located on U.S.G.S. map “Cordelia Quadrangle.”</P>
          <P>(1) From the beginning point, the boundary runs northeast in a straight line to the intersection of Ledgewood Creek with township line “T5N/T4N”;</P>
          <P>(2) Thence in a straight line in a northeast direction to Bench Mark (BM) 19 located in the town of Fairfield;</P>
          <P>(3) Thence in a straight line due north to Soda Springs Creek;</P>

          <P>(4) Thence in a straight line in a northwest direction to the extreme <PRTPAGE P="129"/>southeast corner of Napa County located just south of Section 34, Township 6 North, Range 2 West;</P>
          <P>(5) Thence due west along the Napa/Solano County border to where it intersects with range line “R3W/R2W”;</P>
          <P>(6) Thence due south along range line “R3W/R2W” to the point of beginning.</P>
          <CITA>[T.D. ATF-117, 47 FR 52997, Nov, 24, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.46</SECTNO>
          <SUBJECT>Livermore Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Livermore Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Livermore Valley viticultural area are 13 United States Geological Survey 1:24,000 scale topographic maps. They are titled:</P>
          <P>(1) Clayton, CA (1953; Photorevised 1980; Minor Revision 1994);</P>
          <P>(2) Diablo, Calif. (1953; Photorevised 1980);</P>
          <P>(3) Tassajara, CA (1996);</P>
          <P>(4) Byron Hot Springs, Calif., (1953, Photorevised 1968);</P>
          <P>(5) Altamont, Calif., (1953, Photorevised 1981);</P>
          <P>(6) Midway, Calif., (1953, Photorevised 1980);</P>
          <P>(7) Cedar Mtn., CA, (1956, Photorevised 1971, Minor Revision 1994);</P>
          <P>(8) Mendenhall Springs, CA (1996);</P>
          <P>(9) La Costa Valley, CA (1996);</P>
          <P>(10) Niles, Calif., (1961, Photorevised 1980);</P>
          <P>(11) Dublin, Calif., (1961, Photorevised 1980);</P>
          <P>(12) Hayward, CA (1993); and</P>
          <P>(13) Las Trampas Ridge, CA (1995).</P>
          <P>(c) <E T="03">Boundary.</E> The Livermore Valley viticultural area is located in the State of California in Contra Costa and Alameda Counties. The Livermore Valley viticultural area's boundary is defined as follows:</P>
          <P>(1) The beginning point is on the Clayton map at the peak of Mount Diablo (VABM 3849) where the Mount Diablo Base Line and Mount Diablo Meridian Line intersect, T1S, R1E;</P>
          <P>(2) From the beginning point proceed southeast in a straight line for approximately 14 miles, crossing the Diablo and Tassajara maps, and pass onto the Byron Hot Springs map to the summit of Brushy Peak (elevation 1,702 feet), T1S, R2E; then</P>
          <P>(3) Continue due south in a straight line approximately 400 feet to the northern boundary of section 13, T2S, R2E; then</P>
          <P>(4) Proceed due east along the section 13 and section 18 northern boundary lines to the northeast corner of section 18, T2S, R3E; then</P>
          <P>(5) Continue southeast in a straight line approximately 1.8 miles to BM 720 in section 21, T2S, R3E, on the Altamont map; then</P>
          <P>(6) Continue south-southeast in a straight line approximately 1 mile to an unnamed, 1,147-foot peak in section 28, T2S, R3E; then</P>
          <P>(7) Continue south-southwest in a straight line approximately 1.1 miles to the intersection of the eastern boundary of section 32, T2S, R3E, with Interstate 580; then</P>
          <P>(8) Continue southeast in a straight line approximately 2.7 miles to BM 1602 in Patterson Pass in section 10, T3S, R3E; then</P>
          <P>(9) Continue south-southeast in a straight line approximately 2.8 miles to BM 1600, adjacent to Tesla Road in section 26, T3S, R3E, on the Midway map; then</P>
          <P>(10) Continue south in a straight line approximately 4.2 miles, passing onto the Cedar Mtn. map, to BM 1878, 40 feet north of Mines Road, in section 14, T4S, R3E; then</P>
          <P>(11) Proceed west-southwest in a straight line approximately 4.2 miles, passing onto the Mendenhall Springs map, to the southeast corner of section 19, T4S, R3E; then</P>
          <P>(12) Continue west along the southern boundaries of section 19, T4S, R3E, and section 24, T4S, R2E, to the southwest corner of section 24; then</P>
          <P>(13) Proceed north along the western boundary of section 24, T4S, R2E, to the southeast corner of section 14, T4S, R2E; then</P>
          <P>(14) Continue west along the southern boundary of section 14, T4S, R2E, to its southwest corner and then proceed north along the western boundary of section 14 to its intersection with the Hetch Hetchy Aqueduct, T4S, R2E; then</P>

          <P>(15) Follow the Hetch Hetchy Aqueduct west-southwest approximately 4.2 <PRTPAGE P="130"/>miles to the Aqueduct's intersection with the R1E/R2E range line on the La Costa Valley map, T4S; then</P>
          <P>(16) Continue southwest in a straight line approximately 3.9 miles, crossing Apperson, Welsh, and Alameda Creeks, to BM 533 in section 10, T5S, R1E; then</P>
          <P>(17) Proceed due west-northwest in a straight line approximately 1.9 miles, passing onto the Niles map, to the line's intersection with the eastern boundary of section 5 and the Fremont Boundary Line, T5S, R1E; then</P>
          <P>(18) Continue northwest in a straight line approximately 1.1 miles to an unnamed, 1,291-foot peak in section 32, T4S, R1E; then</P>
          <P>(19) Continue northwest in a straight line approximately 1.1 miles to an unnamed, 1,058-foot peak in section 30, T4S, R1E; then</P>
          <P>(20) Continue northwest in a straight line approximately 3.8 miles, passing through BM 161 in section 11, T4S, R1W, until the line intersects Palomares Road, a medium duty road, in section 11; then</P>
          <P>(21) Follow Palomares Road in a northerly direction for approximately 0.7 miles to the road's intersection with the power transmission line shown in section 11, T4S, R1W; then</P>
          <P>(22) Proceed northwest along the power transmission line for approximately 6.4 miles, passing through the Dublin map near Walpert Ridge, onto the Hayward map to the point where the power transmission line turns nearly west, approximately 500 feet south of an unnamed, 891-foot, peak, T3S, R2W; then</P>
          <P>(23) Continue north-northwest in a straight line approximately 1.4 miles to an unnamed, 840-foot peak, T3S, R2W; then</P>
          <P>(24) Proceed north-northeast in a straight line approximately 3.4 miles, returning to the Dublin map, to the point where the Contra Costa County-Alameda County line turns to the northwest, about 0.4 mile west of Wiedemann Hill (elevation 1,854 feet), section 20, T2S, R1W; then</P>
          <P>(25) Proceed in a northwesterly direction along the meandering Contra Costa County-Alameda County line for approximately 6.0 miles, passing briefly onto the Hayward, Las Trampas Ridge, and Diablo maps, before returning to the Las Trampas Ridge map and continuing to the point where the Contra Costa County-Alameda County line turns to the west-northwest, section 35, T1S, R2W; then</P>
          <P>(26) Continue north-northwest in a straight line approximately 2.7 miles to the summit of Las Trampas Peak (elevation 1,827 feet) in section 22, T1S, R2W; then</P>
          <P>(27) Proceed east-northeast in a straight line approximately 8.8 miles, passing through the Diablo map, and return to the beginning point.</P>
          <CITA>[T.D. ATF-112, 47 FR 38520, Sept. 1, 1982, as amended by T.D. TTB-47, 71 FR 34531, June 15, 2006]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.47</SECTNO>
          <SUBJECT>Hudson River Region.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Hudson River Region.”</P>
          <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundaries of Hudson River Region viticultural area are four U.S.G.S. maps, as follows:</P>
          <P>(1) Albany (NK 18-6), scale of 1:250,000 series;</P>
          <P>(2) Hartford (NK 18-9), scale of 1:250,000 series;</P>
          <P>(3) Scranton (NK 18-8), scale of 1:250,000 series;</P>
          <P>(4) Binghamton (NK 18-5), scale of 1:250,000 series.</P>
          <P>(c) <E T="03">Boundary.</E> The Hudson River Region viticultural area is located in New York State. The boundary is as follows:</P>
          <P>(1) The beginning point is the point where N.Y. Route 15 (Merritt Parkway) crosses the New York-Connecticut state line.</P>
          <P>(2) The boundary proceeds northerly along the New York-Connecticut state line and the New York-Massachusetts state line to the northeast corner of Columbia County, New York.</P>
          <P>(3) The boundary proceeds westerly along the Columbia County-Rensselaer County line to the Columbia County-Greene County line in the Hudson River.</P>
          <P>(4) The boundary proceeds southerly along the Columbia County-Greene County line in the Hudson River to the northeast corner of Ulster County.</P>

          <P>(5) The boundary proceeds westerly along the Ulster County-Greene County line to N.Y. Route 214.<PRTPAGE P="131"/>
          </P>
          <P>(6) The boundary proceeds southerly along the eastern side of N.Y. Route 214 to the junction with N.Y. Route 28 in Phoenicia.</P>
          <P>(7) The boundary proceeds southerly along the eastern side of N.Y. Route 28 to the junction with N.Y. Route 28A.</P>
          <P>(8) The boundary proceeds southerly along the eastern side of N.Y. Route 28A to the intersection with the secondary, hard surface, southbound road leading toward Samsonville.</P>
          <P>(9) The boundary proceeds southerly along the eastern side of this southbound road through Samsonville, Tabasco, Mombaccus, Fantinekill, and Pataukunk to the junction with U.S. Route 209.</P>
          <P>(10) The boundary proceeds southerly along the eastern side of U.S. Route 209 to the New York-Pennsylvania state line in the Delaware River.</P>
          <P>(11) The boundary proceeds easterly along the Delaware River to the New York-New Jersey state line.</P>
          <P>(12) The boundary proceeds easterly along the New York-New Jersey state line to N.Y. Route 17.</P>
          <P>(13) The boundary proceeds northerly along the western side of N.Y. Route 17 to the junction with Interstate Route 287.</P>
          <P>(14) The boundary proceeds easterly along the northern side of Interstate Route 287 to the junction with N.Y. Route 15.</P>
          <P>(15) The boundary proceeds easterly along the northern side of N.Y. Route 15 to the beginning point.</P>
          <CITA>[T.D. ATF-105, 47 FR 24294, June 4, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.48</SECTNO>
          <SUBJECT>Monticello.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Monticello.”</P>
          <P>(b) <E T="03">Approved maps.</E> Approved maps for the Monticello viticultural area are three 1971 U.S.G.S. maps titled:</P>
          <P>(1) Charlottesville Quadrangle, Virginia: 1:250,000 minute series;</P>
          <P>(2) Roanoke Quadrangle, Virginia: 1:250,000 minute series; and</P>
          <P>(3) Washington, DC: 1:250,000 minute series.</P>
          <P>(c) <E T="03">Boundaries.</E> (1) From Norwood, Virginia, following the Tye River west and northwest until it intersects with the eastern boundary of the George Washington National Forest;</P>
          <P>(2) Following this boundary northeast to Virginia Rt. 664;</P>
          <P>(3) Then west following Rt. 664 to its intersection with the Nelson County line;</P>
          <P>(4) Then northeast along the Nelson County line to its intersection with the Albemarle County line at Jarman Gap;</P>
          <P>(5) From this point continuing northeast along the eastern boundary of the Shenandoah National Park to its intersection with the northern Albemarle County line;</P>
          <P>(6) Continuing northeast along the Greene County line to its intersection with Virginia Rt. 33;</P>
          <P>(7) Follow Virginia Rt. 33 east to the intersection of Virginia Rt. 230 at Stanardsville;</P>
          <P>(8) Follow Virginia Rt. 230 north to the Greene County line (the Conway River);</P>
          <P>(9) Following the Greene County line (Conway River which becomes the Rapidan River) southeast to its intersection with the Orange County line;</P>
          <P>(10) Following the Orange County line (Rapidan River) east and northeast to its confluence with the Mountain Run River;</P>
          <P>(11) Then following the Mountain Run River southwest to its intersection with Virginia Rt. 20;</P>
          <P>(12) Continuing southwest along Rt. 20 to the corporate limits of the town of Orange;</P>
          <P>(13) Following southwest the corporate limit line to its intersection with U.S. Rt. 15;</P>
          <P>(14) Continuing southwest on Rt. 15 to its intersection with Virginia Rt. 231 in the town of Gordonsville;</P>
          <P>(15) Then southwest along Rt. 231 to its intersection with the Albemarle County line.</P>
          <P>(16) Continuing southwest along the county line to its intersection with the James River;</P>
          <P>(17) Then following the James River to its confluence with the Tye River at Norwood, Virginia, the beginning point.</P>
          <CITA>[T.D. ATF-164, 49 FR 2758, Jan. 23, 1984, as amended by T.D. ATF-249, 52 FR 5957, Feb. 27, 1987; T.D. ATF-255, 52 FR 23652, June 24, 1987]</CITA>
        </SECTION>
        <SECTION>
          <PRTPAGE P="132"/>
          <SECTNO>§ 9.49</SECTNO>
          <SUBJECT>Central Delaware Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Central Delaware Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Central Delaware Valley viticultural area are nine U.S.G.S. maps in the 7.5 minute series (topographic). They are titled:</P>
          <P>(1) Bloomsbury Quadrangle, New Jersey, 1955 (photorevised 1970).</P>
          <P>(2) Riegelsville Quadrangle, Pennsylvania-New Jersey, 1956 (photorevised 1968 and 1973).</P>
          <P>(3) Frenchtown Quadrangle, Pennsylvania-New Jersey, 1955 (photorevised 1970).</P>
          <P>(4) Lumberville Quadrangle, Pennsylvania-New Jersey, 1955 (photorevised 1968 and 1973).</P>
          <P>(5) Stockton Quadrangle, New Jersey-Pennsylvania, 1954 (photorevised 1970).</P>
          <P>(6) Hopewell Quadrangle, New Jersey, 1954 (photorevised 1970).</P>
          <P>(7) Buckingham Quadrangle, Pennsylvania—Bucks Co., 1953 (photorevised 1968 and 1973).</P>
          <P>(8) Lambertville Quadrangle, Pennsylvania-New Jersey, 1953 (photorevised 1968 and 1973).</P>
          <P>(9) Pennington Quadrangle, New Jersey-Pennsylvania 1954 (photorevised 1970).</P>
          <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Central Delaware Valley viticultural area is located in Pennsylvania and New Jersey. The starting point of the following boundary description is the summit of Strawberry Hill, which is located in New Jersey near the Delaware River about one mile northwest of Titusville, at the southern end of the Central Delaware Valley viticultural area. The starting point is found on the Lambertville Quadrangle map.</P>
          <P>(2) <E T="03">Boundary Description:</E> (i) From the summit of Strawberry Hill (475 feet) in a straight line to the summit of Mt. Canoe (428 feet—on the Pennington Quadrangle map).</P>
          <P>(ii) From there due east to Mercer County Route 579 (Bear Tavern Road) about .2 mile south of Ackors Corner.</P>
          <P>(iii) Then northward along Mercer 579 to Harbourton.</P>
          <P>(iv) From there northwestward along Route 3 (Mount Airy-Harbourton Road) to the 2nd English Presbyterian Church in Mount Airy (on the Stockton Quadrangle map).</P>
          <P>(v) From there along Old York Road northward to Benchmark 157 on U.S. Route 202.</P>
          <P>(vi) From there westward along Queen Road and northwestward along Mount Airy Road to Dilts Corner.</P>
          <P>(vii) From there northwestward along Dilts Corner Road to Sandy Ridge Church.</P>
          <P>(viii) From there northwestward via Cemetary Road to Benchmark 305.</P>
          <P>(ix) From there northward along Covered Bridge Road to Green Sergeant Covered Bridge.</P>
          <P>(x) From there generally westward along Sanford Road to its intersection with Route 519 about one mile north of Rosemont.</P>
          <P>(xi) From there northward along Route 519 (via Kingwood, Barbertown and Baptistown) to Palmyra (on the Frenchtown Quadrangle map).</P>
          <P>(xii) From the intersection in Palmyra, in a straight line northward to the 487 ft. elevation point near Nishisakawick Creek.</P>
          <P>(xiii) From there in a straight line northwestward to Benchmark 787 on Rt. 579 (a secondary hard surface highway, unnamed on the map).</P>
          <P>(xiv) From there northward along Route 579 to Benchmark 905 (on the Bloomsbury Quadrangle map).</P>
          <P>(xv) From there in a straight line westward to the 952 ft. summit ;of Musconetcong Mountain (on the Frenchtown Quadrangle map).</P>
          <P>(xvi) From there in a straight line southwestward to the 836 ft. summit of Musconetcong Mountain (on the Riegelsville Quadrangle map).</P>
          <P>(xvii) From there in straight lines connecting the 838 ft., 839 ft., 707 ft., and 386 ft. summits of Musconetcong Mountain.</P>
          <P>(xviii) From the 386 ft. summit of Musconetcong Mountain in a straight line across the Delaware River to the intersection of Routes 611 and 212.</P>
          <P>(xix) From there along Route 212 to the intersection with the lane going up Mine Hill.</P>
          <P>(xx) From there in a straight line to the summit of Mine Hill (488 feet).</P>

          <P>(xxi) From there in a straight line southwestward to the 522 ft. summit elevation point.<PRTPAGE P="133"/>
          </P>
          <P>(xxii) From there southeastward to the summit of Chestnut Hill (743 feet).</P>
          <P>(xxiii) From there in a straight line southeastward to the 347 ft. summit elevation point (located south of Kintnersville near Benchmark 173, about .1 mile west of Route 611).</P>
          <P>(xxiv) From there in a straight line eastward to the summit of Coffman Hill (826 feet).</P>
          <P>(xxv) From there in a straight line southeastward to the 628 ft. summit elevation point (about .3 mile north of Camp Davis).</P>
          <P>(xxvi) From there in a straight line southeastward to the point where Bridgeton, Nockamixon, and Tinicum Townships meet (on the Frenchtown Quadrangle map).</P>
          <P>(xxvii) From there in a straight line southward to the intersection of Slant Hill Road (Covered Bridge Road) and Stump Road in Smiths Corner (on the Lumberville Quadrangle map).</P>
          <P>(xxviii) From there in a straight line southeastward to the 472 ft. elevation point near Rocky Ridge School.</P>
          <P>(xxix) From there southeastward in a straight line to the 522 ft. elevation point on Plumstead Hill.</P>
          <P>(xxx) From there in a straight line to the 482 ft. elevation point about .7 mile northwest of Lahaska.</P>
          <P>(xxxi) From there in a straight line southeastward to the 352 ft. elevation point approximately .6 mile northeast of Lahaska.</P>
          <P>(xxxii) From there in a straight line to the point where a power transmission line crosses the 400 ft. contour line on the south side of Solebury Mountain (on the Lambertville Quadrangle map).</P>
          <P>(xxxiii) From there in a straight line to the tower on Bowman Hill in Washington Crossing State Park.</P>
          <P>(xxxiv) From there in a straight line across the Delaware River to the starting point, the summit of Strawberry Hill (475 feet).</P>
          <CITA>[T.D. ATF-168, 49 FR 10117, Mar. 19, 1984, as amended by T.D. ATF-249, 52 FR 5958, Feb. 27, 1987]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.50</SECTNO>
          <SUBJECT>Temecula Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Temecula Valley.”</P>
          <P>(b) <E T="03">Approved map.</E>The approved maps for determining the boundary of the Temecula Valley viticultural area are seven USGS quadrangle maps in the 7.5 minute series, as follows:</P>
          <P>(1) Wildomar, California, dated 1953, photorevised 1973;</P>
          <P>(2) Fallbrook, California, dated 1968;</P>
          <P>(3) Murrieta, California, dated 1953, photorevised 1979;</P>
          <P>(4) Temecula, California, dated 1968, photorevised 1975;</P>
          <P>(5) Pechanga, California, dated 1968;</P>
          <P>(6) Sage, California, dated 1954;</P>
          <P>(7) Bachelor Mountain, California, dated 1953, photorevised 1973.</P>
          <P>(c) <E T="03">Boundary.</E> The Temecula Valley viticultural area is located in Riverside County, California. The boundary is as follows:</P>
          <P>(1) The beginning point is the northernmost point of the Santa Rosa Land Grant where the Santa Rosa Land Grant boundary intersects the easternmost point of the Cleveland National Forest boundary.</P>
          <P>(2) The boundary follows the Cleveland National Forest boundary southwesterly to the point where it converges with the Riverside County-San Diego County line.</P>
          <P>(3) The boundary follows the Riverside County-San Diego County line southwesterly, then southeasterly to the point where the Riverside County-San Diego County line diverges southward and the Santa Rosa Land Grant boundary continues southeasterly.</P>
          <P>(4) The boundary follows the Santa Rosa Land Grant boundary southeasterly, then northeasterly, to its intersection with the Temecula Land Grant boundary.</P>
          <P>(5) The boundary follows the Temecula Land Grant boundary southeasterly, then northeasterly, to its intersection with the Little Temecula Land Grant boundary.</P>
          <P>(6) The boundary follows the Little Temecula Land Grant boundary southeasterly to its intersection with the boundary of that portion of the Pechanga Indian Reservation which, until 1907, was Lot “E” of the Little Temecula Land Grant.</P>

          <P>(7) The boundary follows the Pechanga Indian Reservation boundary southeasterly, then northeasterly (including that portion of the Penchanga <PRTPAGE P="134"/>Indian Reservation in the approved viticultural area) to the point at which it rejoins the Little Temecula Land Grant boundary.</P>
          <P>(8) The boundary follows the Little Temecula Land Grant boundary northeasterly to its intersection with the Pauba Land Grant boundary.</P>
          <P>(9) The boundary follows the Pauba Land Grant boundary southeasterly, then northeasterly, to the north-south section line dividing Section 23 from Section 24 in Township 8 South, Range 2 West.</P>
          <P>(10) The boundary follows this section line south to the 1500-foot contour line.</P>
          <P>(11) The boundary follows the 1500-foot contour line easterly to the range line dividing Range 2 West from Range 1 West.</P>
          <P>(12) The boundary follows this range line north, across California State Highway 71/79, to the 1400-foot contour line of Oak Mountain.</P>
          <P>(13) The boundary follows the 1400-foot contour line around Oak Mountain to its intersection with the 117°00′ West longitude meridian.</P>
          <P>(14) The boundary follows the 117°00′ West longitude meridian north to its intersection with the Pauba Land Grant boundary.</P>
          <P>(15) The boundary follows the Pauba Land Grant boundary northwesterly, then west, then south, then west, to Warren Road (which coincides with the range line dividing Range 1 West from Range 2 West).</P>
          <P>(16) The boundary follows Warren Road north to an unnamed east-west, light-duty, hard or improved surface road (which coincides with the section line dividing Section 12 from Section 13 in Township 7 South, Range 2 West).</P>
          <P>(17) The boundary follows this road west to the north-south section line dividing Section 13 from Section 14 in Township 7 South, Range 2 West.</P>
          <P>(18) The boundary follows this section line south to its intersection with Buck Road (which coincides with the east-west section line on the southern edge of Section 14 in Township 7 South, Range 2 West).</P>
          <P>(19) The boundary follows Buck Road west to the point where it diverges northwesterly from the section line on the southern edge of Section 14 in Township 7 South, Range 2 West.</P>
          <P>(20) The boundary follows this section line west, along the southern edges of Sections 14, 15, 16, 17, and 18 in Township 7 South, Range 2 West, to Tucalota Creek.</P>
          <P>(21) The boundary follows Tucalota Creek southerly to Santa Gertrudis Creek.</P>
          <P>(22) The boundary follows Santa Gertrudis Creek southwesterly to Murrieta Creek.</P>
          <P>(23) The boundary proceeds northwesterly along the westernmost branches of Murrieta Creek to its intersection with Hayes Avenue, northwest of Murrieta, California.</P>
          <P>(24) The boundary follows Hayes Avenue northwesterly, approximately 4,000 feet, to its terminus at an unnamed, unimproved, fair or dry weather road.</P>
          <P>(25) The boundary follows this road southwesterly to Murrieta Creek.</P>
          <P>(26) The boundary proceeds northwesterly along the westernmost branches of Murrieta Creek to its intersection with Orange Street in Wildomar, California.</P>
          <P>(27) From the intersection of Murrieta Creek and Orange Street in Wildomar, California, the boundary proceeds in a straight line to the beginning point.</P>
          <P>(d) From November 23, 1984, until June 17, 2004, the name of this viticultural area was “Temecula”. Effective June 18, 2004, this viticulture area is named “Temecula Valley”. Existing certificates of label approval showing “Temecula” as the appellation of origin will be revoked by operation of this regulation on June 19, 2006.</P>
          <CITA>[T.D. ATF-188, 49 FR 42566, Oct. 23, 1984; 49 FR 43455, Oct. 29, 1984, as amended by T.D. ATF-221, 51 FR 750, Jan. 8, 1986; T.D. ATF-249, 52 FR 5958, Feb. 27, 1987; T.D. TTB-10, 69 FR 20825, Apr. 19, 2004]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.51</SECTNO>
          <SUBJECT>Isle St. George.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Isle St. George.”</P>
          <P>(b) <E T="03">Approved maps.</E> The approved map for determining the boundary of the Isle St. George viticultural area is the U.S.G.S. quadrangle map, “Put-in-Bay, Ohio”, 7.5 minute series, edition of 1969.<PRTPAGE P="135"/>
          </P>
          <P>(c) <E T="03">Boundaries.</E> The Isle St. George viticultural area is located entirely within Ottawa County, Ohio. The boundary of the Isle St. George viticultural area is the shoreline of the island named “North Bass Island” on the “Put-in-Bay, Ohio” U.S.G.S. map, and the viticultural area comprises the entire island.</P>
          <CITA>[T.D. ATF-110, 47 FR 36421, Aug. 20, 1982]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.52</SECTNO>
          <SUBJECT>Chalk Hill.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Chalk Hill.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Chalk Hill viticultural area are the U.S.G.S. topographic maps titled:</P>
          <P>“Mark West Springs Quadrangle, California”, 7.5 minute series, 1958; and,</P>
          <P>“Healdsburg Quadrangle, California”, 7.5 minute series, 1955 (Photorevised 1980).</P>
          <P>(c) <E T="03">Boundary.</E> The Chalk Hill viticultural area is located near the town of Windsor in Sonoma County, California. From the beginning point on the south line of Section 2, Township 8 North (T. 8 N.), Range 9 West (R. 9 W.) at the intersection of Arata Lane and Redwood Highway (a.k.a. Old Highway 101), on the “Healdsburg Quadrangle” map, the boundary proceeds—</P>
          <P>(1) Southeasterly along Redwood Highway through Section 11, T. 8 N., R. 9 W., to the point of intersection with Windsor River Road;</P>
          <P>(2) Then westerly along Windsor River Road on the south boundary of Section 11, T. 8 N., R. 9 W., to the point of intersection with Starr Road;</P>
          <P>(3) The southerly along Starr Road to the point of intersection with the south line of Section 14, T. 8 N., R. 9 W.;</P>
          <P>(4) Then easterly along the south line of Sections 14 and 13, T. 8 N., R. 9 W. and Section 18, T. 8 N., R. 8 W., to the point of intersection with the Redwood Highway;</P>
          <P>(5) Then southeasterly along the Redwood Highway to the intersection with an unnamed road that intersects the Redwood Highway at a right angle from the northeast near the southwest corner of Section 28 near Mark West Creek, T. 8 N., R. 8 W.;</P>
          <P>(6) Then northeast approximately 500 feet along the unnamed road to its intersection with the Pacific Gas and Electric power transmission line;</P>
          <P>(7) Then northeast approximately 1,000 feet along the power transmission line (paralleling the unnamed road) to the point where the power transmission line turns in a northerly direction;</P>
          <P>(8) Then in a northerly direction along the power transmission line to the point of its intersection with the south line of Section 17, T. 8 N., R. 8 W.;</P>
          <P>(9) Then east along the south line of Sections 17, 16 and 15, T. 8 N., R. 8 W. to the point of intersection with Mark West Road on the “Mark West Quadrangle Map”;</P>
          <P>(10) Then northerly for approximately 1.3 miles along Mark West Road (which becomes Porter Creek Road), then northeasterly for approximately 1.7 miles on Porter Creek Road to its intersection with the unnamed medium duty road that parallels Porter Creek in Section 12, T. 8 N., R. 8 W.; then northeasterly on the Franz Valley Road over the Tarwater Grade and continuing along the Franz Valley Road for approximately 3 miles to its intersection with Franz Creek (approximately 2,000 feet west of the range line common to R. 7 W. and R. 8 W. in T. 9 N. and approximately 1,150 feet north of the north line of Section 25, T. 9 N., R. 8 W.);</P>
          <P>(11) Then westerly along Franz Creek to its point of intersection with the east line of Section 21, T. 9 N., R. 8 W.;</P>
          <P>(12) Then southerly along the east line of Section 21 to the southeast corner thereof;</P>
          <P>(13) Then southerly, approximately 0.08 mile, along the west line of section 27, T. 9 N., R. 8 W., to the point at which an unnamed unimproved road which parallels the south bank of Martin Creek intersects the west line of section 27, T. 9 N., R. 8 W.;</P>
          <P>(14) Then southeasterly, approximately 1.07 miles, along said road to the point at which the road is crossed by the east line of section 27,T. 9 N., R. 8 W.;</P>

          <P>(15) Then southerly, approximately 0.65 mile, along the east lines of sections 27 and 34, T. 9 N., R. 8 W., to the <PRTPAGE P="136"/>point in the northeast corner of section 34, T. 9 N., R. 8 W. where the north fork of Barnes Creek intersects such line in section 34, T. 9 N., R. 8 W.;</P>
          <P>(16) Then continuing along the north fork of Barnes Creek, approximately 0.5 mile, in a generally westerly direction to a small dwelling at the eastern terminus of an unnamed unimproved road (known locally as the access to the Shurtleff Ranch) in section 34, T. 9 N., R. 8 W.;</P>
          <P>(17) Then continuing in a generally westerly direction, approximately 1.4 miles, along the unnamed unimproved road (known locally as the access to the Shurtleff Ranch) to its intersection with an unnamed unimproved road (known locally as Spurgeon Road) in section 33, T. 9 N., R. 8 W. on the Healdsburg, California, Quadrangle Map;</P>
          <P>(18) Then westerly, approximately 0.45 mile, along the unnamed unimproved road (known locally as Spurgeon Road) to the point where the road intersects Chalk Hill Road in section 32, T. 9 N., R. 8 W.;</P>
          <P>(19) Then in a generally northwesterly direction, approximately 1.3 miles, along Chalk Hill Road to the point where Chalk Hill Road crosses Brooks Creek in section 29, T. 9 N., R. 8 W.;</P>
          <P>(20) Then north in a straight line, approximately 0.2 mile, to the top of a peak identified as Chalk Hill;</P>
          <P>(21) Then west-northwesterly in a straight line to the confluence of Brooks Creek and the Russian River;</P>
          <P>(22) Then westerly along the Russian River to the point of intersection with the range line common to R. 8 W. and R. 9 W. in T. 9 N.;</P>
          <P>(23) Then southwesterly in a straight line to the point of a hill identified as having an elevation of 737 feet;</P>
          <P>(24) Then south-southwesterly in a straight line to the point at the easterly terminus of Reiman Road;</P>
          <P>(25) Then southwesterly in a straight line to the point at the intersection of the township line common to T. 8 N. and T. 9 N. in R. 9 W. and the frontage road (a.k.a. Los Amigos Road) for U.S. Highway 101;</P>
          <P>(26) Then west approximately 3,000 feet along the township line common to T. 8 N. and T. 9 N. in R. 9 W.;</P>
          <P>(27) Then southerly for approximately 2,000 feet in a straight line to the point of intersection with an unnamed stream drainage;</P>
          <P>(28) Then east in a straight line to the point of intersection with Eastside Road;</P>
          <P>(29) Then northeasterly along Eastside Road to the point of intersection with Redwood Highway;</P>
          <P>(30) Then southeasterly along Redwood Highway to the point of beginning.</P>
          <CITA>[T.D. ATF-155, 48 FR 48812, Oct. 21, 1983, as amended by T.D. ATF-272, 53 FR 17023, May 13, 1988]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.53</SECTNO>
          <SUBJECT>Alexander Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Alexander Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Alexander Valley viticultural area are seven U.S.G.S. maps entitled:</P>
          <P>(1) “Mark West Springs Quadrangle, California,” 7.5 minute series, 1958;</P>
          <P>(2) “Mount St. Helena Quadrangle, California,” 7.5 minute series, 1959;</P>
          <P>(3) “Jimtown Quadrangle, California—Sonoma County,” 7.5 minute series, 1955 (Photorevised 1975);</P>
          <P>(4) “Geyserville Quadrangle, California—Sonoma County,” 7.5 minute series, 1955 (Photorevised 1975);</P>
          <P>(5) “Healdsburg Quadrangle, California—Sonoma County,” 7.5 minute series, 1955;</P>
          <P>(6) “Asti Quadrangle, California,” 7.5 minute series, 1959 (Photorevised 1978); and</P>
          <P>(7) “Cloverdale Quadrangle, California,” 7.5 minute series, 1960.</P>
          <P>(c) <E T="03">Boundaries.</E> The Alexander Valley viticultural area is located in northeastern Sonoma County, California. From the beginning point at the northeast corner of Section 32, Township 12 North (T. 12 N.), Range 10 West (R. 10 W.), on the Asti Quadrangle map, the boundary runs—</P>
          <P>(1) West along the north line of Sections 32 and 31, T. 12 N., R. 10 W., and Sections 36, 35, and 34, T. 12 N., R. 11 W., to the northwest corner of Section 34, on the Cloverdale Quadrangle map;</P>

          <P>(2) Then south along the west line of Section 34 to the southwest corner thereof;<PRTPAGE P="137"/>
          </P>
          <P>(3) Then east southeasterly in a straight line to the southeast corner of section 2, T. 11 N., R. 11 W.;</P>
          <P>(4) Then south southeasterly in a straight line to the southeast corner of section 24, T. 11 N., R. 11 W.;</P>
          <P>(5) Then southeasterly in a straight line across sections 30, 31 and 32, T. 11 N., R. 10 W., to the point at 38°45′ N. latitude and 123°00′ E. longitude in section 5, T. 10 N., R. 10 W.;</P>
          <P>(6) Then southeasterly in a straight line approximately 11,000 feet (closely following the ridge line) to the northwest corner of Section 10, T. 10 N., R.10 W. on the Geyserville Quadrangle map;</P>
          <P>(7) [Reserved]</P>
          <P>(8) Then southerly along the west line of Section 10, T. 10 N., R. 10 W.;</P>
          <P>(9) Then S. 74 degrees, E. 2,800 feet in a straight line to the northeasterly tip of a small lake;</P>
          <P>(10) Then N. 57 degrees, E. 2,300 feet in a straight line to the southeast corner of Section 10, T. 10 N., R. 10 W.;</P>
          <P>(11) Then S. 16 degrees, E. 1,800 feet in a straight line to the point on a peak identified as having an elevation of 664 feet;</P>
          <P>(12) Then S. 55 degrees, E. 7,900 feet in a straight line to the most northerly point on the northeasterly line of “Olive Hill” Cemetery, lying on the easterly side of a light-duty road identified as Canyon Road;</P>
          <P>(13) Then southeasterly along the northeasterly line of “Olive Hill” cemetery to most easterly point thereon;</P>
          <P>(14) Then southerly 3,000 feet along the meanders of the west fork of Wood Creek to the point lying 400 feet north of the point on a peak identified as having an elevation of 781 feet;</P>
          <P>(15) Then southerly 400 feet in a straight line to the point on a peak identified as having an elevation of 781 feet;</P>
          <P>(16) Then S. 50<FR>1/2</FR> degrees, E. 15,200 feet in a straight line to the point lying at the intersection of Lytton Creek with the township line common to T. 9 N. and T. 10 N. in R. 9 W.;</P>
          <P>(17) Then southerly along the meanders of Lytton Creek to the point of intersection with a light-duty road identified as Lytton Springs Road in T. 9 N., R. 9 W.;</P>
          <P>(18) Then easterly along Lytton Springs Road to the point of intersection with a heavy-duty road identified as U.S. Highway 101 (a.k.a. Redwood Highway), on the Jimtown Quadrangle map;</P>
          <P>(19) Then southerly along U.S. Highway 101 to the point of intersection with an unnamed light-duty road (known locally as Chiquita Road), on the Geyserville Quadrangle map;</P>
          <P>(20) Then easterly along the unnamed light-duty road to the point of intersection with an unnamed heavy-duty road (known locally as Healdsburg Avenue), on the Jimtown Quadrangle map;</P>
          <P>(21) Then southeasterly in a straight line approximately 11,000 feet to the 991-foot peak of Fitch Mountain;</P>
          <P>(22) Then east southeasterly approximately 7,000 feet in a straight line to the peak identified as having an elevation of 857 feet;</P>
          <P>(23) Then east southeasterly approximately 1,750 feet to the peak identified as Black Peak;</P>
          <P>(24) Then southeasterly approximately 7,333 feet to the peak identified as having an elevation of 672 feet;</P>
          <P>(25) Then northeasterly approximately 5,000 feet in a straight line to the point of confluence of Brooks Creek with the Russian River in T. 9 N., R. 8 W., on the Healdsburg Quadrangle map;</P>
          <P>(26) Then east-southeasterly 2,400 feet in a straight line to the top of a peak identified as Chalk Hill;</P>
          <P>(27) Then south from said peak, in a straight line, approximately 0.2 mile to the point where Chalk Hill Road crosses Brooks Creek (on the Healdsburg Quadrangle map);</P>
          <P>(28) Then southeasterly, approximately 1.3 miles, along the roadbed of Chalk Hill Road to the point near the confluence of Brooks Creek and Barnes Creek where Chalk Hill Road intersects an unnamed unimproved road (known locally as Spurgeon Road) that parallels Barnes Creek in section 32,T. 9 N., R. 8 W.;</P>

          <P>(29) Then easterly, approximately 0.45 mile, along said road (known locally as Spurgeon Road) to the point where the road is intersected by an unnamed unimproved road (known locally as the access to the Shurtleff Ranch) in section 33, T. 9 N., R. 8 W.;<PRTPAGE P="138"/>
          </P>
          <P>(30) Then continuing along the unnamed unimproved road (known locally as the access to the Shurtleff Ranch), approximately 1.33 miles, in a generally easterly direction, to the eastern terminus of said road at a small dwelling along the north fork of Barnes Creek in section 34, T. 9 N., R. 8 W. on the Mark West Springs, California, Quadrangle map;</P>
          <P>(31) Then easterly along the north fork of Barnes Creek, approximately 0.5 mile, to the point in the northeast corner of section 34, T. 9 N., R. 8 W. where the north fork of Barnes Creek intersects the east line of section 34, T. 9 N., R. 8 W.;</P>
          <P>(32) Then north, approximately 0.65 mile, along the east lines of sections 34 and 27, T. 9 N., R. 8 W., to the point at which an unnamed unimproved road which parallels the south bank of Martin Creek intersects the eastern border of section 27, T. 9 N., R. 8 W.;</P>
          <P>(33) Then in a generally northwesterly direction, approximately 1.07 miles, along said road to the point at which the road is crossed by the west line of section 27, T. 9 N., R. 8 W.;</P>
          <P>(34) Then north, approximately 0.08 mile, along the west line of section 27, T. 9 N., R. 8 W., to the southeast corner of section 21, T. 9 N., R. 8 W.;</P>
          <P>(35) Then northerly along the east line of Sections 21, 16, and 9, T. 9 N., R. 8 W. to the northeast corner of Section 9, on the Mount St. Helena Quadrangle map;</P>
          <P>(36) Then westerly along the north line of Section 9 to the northwest corner thereof, on the Jimtown Quadrangle map;</P>
          <P>(37) Then northerly along the western lines of section 4, of T. 9 N, R. 8 W., and sections 33, 28, 21, 16, and 9 of T. 10 N., R. 8 W.;</P>
          <P>(38) Then westerly along the northern lines of section 8 and 7, T. 10 N., R. 8 W. and section 12, T. 10 N., R. 9 W. to the southeastern corner of section 2, T. 10 N., R. 9 W.;</P>
          <P>(39) Then northwesterly in a straight line to the eastern line of section 3 at 38 degrees 45 minutes latitude, T. 10 N., R. 9 W.;</P>
          <P>(40) Then westerly along latitude line 38 degrees 45 minutes to the point lying at 122 degrees 52 minutes 30 seconds longitude;</P>
          <P>(41) Then northwesterly in a straight line to the southeast corner of section 4, T. 11 N., R. 10 W., on the Asti, Quadrangle map;</P>
          <P>(42) Then northeasterly in a straight line to the southeast corner of section 34, T. 12 N., R. 10 W.;</P>
          <P>(43) Then north along the east boundary of section 34, T. 12 N., R. 10 W., to the northeast corner of section 34, T. 12 N., R. 10 W.;</P>
          <P>(44) Then west along the north boundaries of sections 34 and 33, T. 12 N., R. 10 W., to the point of beginning.</P>
          <CITA>[T.D. ATF-187, 49 FR 42724, Oct. 24, 1984, as amended by T.D. ATF-233; 51 FR 30354, Aug. 26, 1986; T.D. ATF-272, 53 FR 17025, May 13, 1988; T.D. ATF-300, 55 FR 32402, Aug. 9, 1990; T.D. ATF-468, 66 FR 50565, Oct. 4, 2001]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.54</SECTNO>
          <SUBJECT>Santa Ynez Valley.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Santa Ynez Valley.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Santa Ynez Valley viticultural area are 12 U.S.G.S. quadrangle maps. They are entitled:</P>
          <P>(1) “Figueroa Mountain, Cal.”, 7.5 minute series, edition of 1959;</P>
          <P>(2) “Foxen Canyon, Cal.”, 7.5 minute series, edition of 1964;</P>
          <P>(3) “Lake Cachuma, Cal.”, 7.5 minute series, edition of 1959;</P>
          <P>(4) “Lompoc, Cal.”, 7.5 minute series, edition of 1959 (photorevised 1974);</P>
          <P>(5) “Lompoc Hills, Cal.”, 7.5 minute series, edition of 1959;</P>
          <P>(6) “Los Alamos, Cal.”, 7.5 minute series, edition of 1959;</P>
          <P>(7) “Los Olivos, Cal.”, 7.5 minute series, edition of 1959 (photoinspected 1974);</P>
          <P>(8) “Santa Rosa Hills, Cal.”, 7.5 minute series, edition of 1959;</P>
          <P>(9) “Santa Ynez, Cal.”, 7.5 minute series, edition of 1959 (photorevised 1974);</P>
          <P>(10) “Solvang, Cal.”, 7.5 minute series, edition of 1959 (photorevised 1974);</P>
          <P>(11) “Zaca Creek, Cal.”, 7.5 minute series, edition of 1959; and</P>
          <P>(12) “Zaca Lake, Cal.”, 7.5 minute series, edition of 1964.</P>
          <P>(c) <E T="03">Boundaries.</E> The Santa Ynez Valley viticultural area is located within Santa Barbara County, California. The beginning point is found on the “Los Alamos, California” U.S.G.S. map <PRTPAGE P="139"/>where California Highway 246 (indicated as Highway 150 on the Los Alamos map) intersects with the 120°22′30″ longitude line.</P>
          <P>(1) Then north following the 120°22′30″ longitude line to Cebada Canyon Road.</P>
          <P>(2) Then northeast following Cebada Canyon Road and an unnamed jeep trail to the northern boundary of Section 9, T. 7 N., R. 33 W.</P>
          <P>(3) Then east following the northern boundaries of Sections 9, 10, 11, 12, 7, and 8 to the northeast corner of Section 8, T. 7 N., R. 33 W.</P>
          <P>(4) Then south following the eastern boundaries of Sections 8 and 17 to the intersection with the boundary dividing the La Laguna and San Carlos de Jonata Land Grants.</P>
          <P>(5) Then east following the boundary between the La Laguna and the San Carlos de Jonata Land Grants to the intersection with Canada de Santa Ynez.</P>
          <P>(6) Then northeast in a straight line for approximately 3.6 miles to Benchmark 947 at U.S. Highway 101.</P>
          <P>(7) Then northeast in a straight line for approximately 2.6 miles to the southwest corner of the La Zaca Land Grant.</P>
          <P>(8) Then following the boundary of the La Zaca Land Grant north, then east to its northeast corner.</P>
          <P>(9) Then east in a straight line for approximately 2.0 miles to the point of intersection of the La Laguna and Sisquoc Land Grants with the Los Padres National Forest.</P>
          <P>(10) Then following the boundary of the Los Padres National Forest south, east, and south until it intersects with the eastern boundary of Section 29, T. 7 N., R. 29 W.</P>
          <P>(11) Then south following the eastern boundaries of Sections 29, 32, 5, 8, and 17 to the boundary of the Cachuma Recreation Area at Bitt Benchmark 1074.</P>
          <P>(12) Then following the boundary of the Cachuma Recreation Area west and south to the point of intersection with the Los Padres National Forest.</P>
          <P>(13) Then south and west following the boundary of the Los Padres National Forest to its intersection with the Las Cruces Land Grant at the southwest corner of Section 12, T. 5 N., R. 32 W.</P>
          <P>(14) Then north following the boundary of the Las Cruces Land Grant to the southeast corner of Section 26, T. 6 N., R. 32 W.</P>
          <P>(15) Then west following the southern boundaries of Sections 26, 27, 28, and 29 to the intersection with the northern boundary of the San Julian Land Grant at the southwestern corner of Section 29, T. 6 N., R. 32 W.</P>
          <P>(16) Then northwest following the boundary of the San Julian Land Grant to its intersection with the 120°22′30″ longitude line.</P>
          <P>(17) Then northwest in a straight line for approximately 3.2 miles to the point where Santa Rosa Road intersects Salsipuedes Creek.</P>
          <P>(18) Then following Salsipuedes Creek downstream to the point of confluence with the Santa Ynez River.</P>
          <P>(19) Then northeast in a straight line for approximately 1.4 miles to an unnamed hill, elevation 597 feet.</P>
          <P>(20) Then northeast in a straight line for approximately 1.7 miles to the point of beginning.</P>
          <CITA>[T.D. ATF-132, 48 FR 16252, Apr. 15, 1983]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.55</SECTNO>
          <SUBJECT>Bell Mountain.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Bell Mountain.”</P>
          <P>(b) <E T="03">Approved map.</E> The appropriate map for determining the boundaries of the Bell Mountain viticultural area is one U.S.G.S. map, titled: Willow City Quadrangle, 7.5 minute series, 1967.</P>
          <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Bell Mountain viticultural area is located in Gillespie County, Texas. The starting point of the following boundary description is the summit of Bell Mountain (1,956 feet).</P>
          <P>(2) <E T="03">Boundary Description.</E> (i) From the starting point, the boundary proceeds due southward for exactly one half mile;</P>
          <P>(ii) Then southeastward in a straight line to the intersection of Willow City Loop Road with an unnamed unimproved road, where marked with an elevation of 1,773 feet;</P>
          <P>(iii) Then generally southward along Willow City Loop Road (a light-duty road) to Willow City.</P>

          <P>(iv) Then continuing southward and westward along the same light-duty <PRTPAGE P="140"/>road to the intersection having an elevation of 1,664 feet;</P>
          <P>(v) Then continuing westward along the light-duty road to the intersection having an elevation of 1,702 feet;</P>
          <P>(vi) Then turning southward along the light-duty road to the intersection having an elevation of 1,736 feet;</P>
          <P>(vii) Then turning westward along the light-duty road to the intersection having an elevation of 1,784 feet;</P>
          <P>(viii) Then turning southward and then westward, following the light-duty road to its intersection with Texas Highway 16, where marked with an elevation of 1,792 feet;</P>
          <P>(ix) Then due westward to the longitude line 98°45′;</P>
          <P>(x) Then northward along that longitude line to a point due west of an unnamed peak with an elevation of 1,784 feet;</P>
          <P>(xi) Then due eastward to the summit of that unnamed peak;</P>
          <P>(xii) Then in a straight line eastward to the intersection of an unnamed unimproved road with Texas Highway 16, where marked with an elevation of 1,822 feet;</P>
          <P>(xiii) Then following that unnamed road, taking the right-hand fork at an intersection, to a point due west of the summit of Bell Mountain;</P>
          <P>(xiv) Then due eastward to the summit of Bell Mountain.</P>
          <CITA>[T.D. ATF-238, 51 FR 36400, Oct. 10, 1986]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.56</SECTNO>
          <SUBJECT>San Lucas.</SUBJECT>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “San Lucas.”</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of San Lucas viticultural area are the following four U.S.G.S. topographical maps of the 7.5 minute series:
          </P>
          <EXTRACT>
            <FP SOURCE="FP-1">San Lucas, CA, 1949, photorevised 1979,</FP>
            <FP SOURCE="FP-1">Nattrass Valley, CA, 1967,</FP>
            <FP SOURCE="FP-1">San Ardo, CA, 1967, and,</FP>
            <FP SOURCE="FP-1">Espinosa Canyon, CA, 1949, photorevised 1979.</FP>
          </EXTRACT>
          
          <P>(c) <E T="03">Boundary.</E> The San Lucas viticultural area is located in Monterey County in the State of California. The boundary is as follows:
          </P>
          <EXTRACT>
            <P>Beginning on the “San Lucas Quadrangle” map at the northwest corner of section 5 in Township 21 South, Range 9 East, the boundary proceeds northeasterly in a straight line approximately 0.35 mile to the 630-foot promontory in section 32, T. 20 S., R. 9 E.;</P>
            <P>(1) Then east southeasterly in a straight line approximately 0.6 mile to the 499-foot promontory in the southwest corner of section 33, T. 20 S., R. 9 E.;</P>
            <P>(2) Then east southeasterly in a straight line approximately 1.3 miles to the 847-foot promontory in section 3, T. 21 S., R. 9 E., on the “Nattrass Valley Quadrangle” map;</P>
            <P>(3) Then south southeasterly in a straight line approximately 2.2 miles to the 828-foot promontory in section 14, T. 21 S., R. 9 E., on the “San Ardo Quadrangle” map;</P>
            <P>(4) Then east southeasterly in a straight line approximately 1.3 miles to the 868-foot promontory in section 13, T. 21 S., R. 9 E.;</P>
            <P>(5) Then southeasterly in a straight line approximately 0.94 mile to the 911-foot promontory in section 19, T. 21 S., R. 10 E.;</P>
            <P>(6) Then easterly in a straight line approximately 1.28 miles to the 1,042-foot promontory in section 20, T. 21 S., R. 10 E.;</P>
            <P>(7) Then east northeasterly in a straight line approximately 1.28 miles to the 998-foot promontory in southeast corner of section 16, T. 21 S., R. 10 E.;</P>
            <P>(8) Then southerly in a straight line approximately 2.24 miles to the 1,219-foot promontory near the east boundary of section 28, T. 21 S., R. 10 E.;</P>
            <P>(9) Then southwesterly in a straight line approximately 1.5 miles to the 937-foot promontory near the north boundary of section 32, T. 21 S., R. 10 E.;</P>
            <P>(10) Then southwesterly in a straight line approximately 0.34 mile to the 833-foot promontory in section 32, T. 21 S., R. 10 E.;</P>
            <P>(11) Then south southeasterly in a straight line approximately 0.5 mile to the 886-foot “Rosenberg” promontory in section 32, T. 21 S., R. 10 E.;</P>
            <P>(12) Then south southeasterly approximately 1.1 miles to the 781-foot promontory in section 5, T. 22 S., R. 10 E.;</P>
            <P>(13) Then southeasterly in a straight line approximately 0.7 mile to the 767-foot promontory in section 9, T. 22 S., R. 10 E.;</P>
            <P>(14) Then southerly in a straight line approximately 0.5 mile to the 647-foot promontory along the south boundary of section 9, T. 22 S., R. 10 E.;</P>
            <P>(15) Then southwesterly in a straight line approximately 2.67 miles to the 835-foot promontory in section 19, T. 22 S., R. 10 E.;</P>
            <P>(16) Then west southwesterly in a straight line approximately 1.1 miles to the 1,230-foot promontory in section 24, T. 22 S., R. 9 E.;</P>
            <P>(17) Then north northwesterly in a straight line approximately 1.4 miles to the 1,149-foot promontory in section 14, T. 22 S., R. 9 E.;</P>
            <P>(18) Then northwesterly in a straight line approximately 0.57 mile to the 1,128-foot promontory in section 11, T. 22 S., R. 9 E.;</P>

            <P>(19) Then west southwesterly in a straight line approximately 0.58 mile to the 1,220-foot <PRTPAGE P="141"/>promontory near the north boundary of section 15, T. 22 S., R. 9 E.;</P>
            <P>(20) Then northwesterly in a straight line approximately 1.33 miles to the 1,071-foot promontory in the northwest corner of section 9, T. 22 S., R. 9 E.;</P>
            <P>(21) Then northwesterly in a straight line approximately 2.82 miles to the 1,004-foot promontory in section 31, T. 21 S., R. 9 E., on the “Espinosa Canyon Quadrangle” map;</P>
            <P>(22) Then north northwesterly in a straight line approximately 1.32 miles to the 882-foot promontory in section 25, T. 21 S., R. 8 E.;</P>
            <P>(23) Then northwesterly in a straight line approximately 1.05 miles to the 788-foot promontory in section 23, T. 21 S., R. 8 E.;</P>
            <P>(24) Then northeasterly approximately 1.3 miles to the 595-foot promontory, section 13, T21S, R8E (Espinosa Canyon Quadrangle);</P>
            <P>(25) Then northeasterly approximately 0.6 mile to the intersection of a meandering, unnamed, light duty road and the fork of an intermittent stream, then continue meandering northeasterly, followed by southeasterly, approximately 1.1 miles to its intersection with an unnamed, light duty road south of the windmill, T21, R8E (Espinosa Canyon Quadrangle);</P>
            <P>(26) Then northeasterly along the unnamed road approximately 0.6 mile to its intersection with the Salinas River, then continue 0.8 mile north in a straight line to benchmark 340, between U.S. Highway 101 and the Salinas River, in T21S, R9E (San Lucas Quadrangle);</P>
            <P>(27) Then approximately 0.4 mile northwesterly in a straight line to the intersection with a water tank, then continues northeasterly in a straight line approximately 0.7 mile, and return to the point of beginning in the northwest corner of section 5, in T21S, R9E (San Lucas Quadrangle).</P>
          </EXTRACT>
          <CITA>[T.D. ATF-248, 52 FR 2945, Jan. 29, 1987, as amended by T.D. TTB-14, 69 FR 38836, June 29, 2004]</CITA>
        </SECTION>
        <SECTION>
          <SECTNO>§ 9.57</SECTNO>
          <SUBJECT>Sonoma County Green Valley.</SUBJECT>
          <EXT-XREF HREF="20070323" REFID="7">Link to an amendment published at 72 FR 13692, Mar. 23, 2007.</EXT-XREF>
          <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Green Valley” qualified by the words “Sonoma County” in direct conjunction with the name “Green Valley.” On a label the words “Sonoma County” may be reduced in type size to the minimum allowed in 27 CFR 4.38(b).</P>
          <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Green Valley viticultural area are three U.S.G.S. maps. They are titled:</P>
          <P>(1) “Sebastopol Quadrangle, California—Sonoma Co.”, 7.5 minute series (1954, photorevised 1980);</P>
          <P>(2) “Camp Meeker Quadrangle, California—Sonoma Co.”, 7.5 minute series (1954, photorevised 1971); and</P>
          <P>(3) “Guerneville Quadrangle, California—Sonoma Co.”, 7.5 minute series (1955).</P>
          <P>(c) <E T="03">Boundaries.</E> The Green Valley viticultural area is located in Sonoma County, California. The beginning point is located in the northeastern portion of the “Camp Meeker Quadrangle” map where the line separating Section 31 from section 32, in Township 8 North (T.8N.), Range 9 West (R.9W.) intersects River Road.</P>
          <P>(1) From the beginning point, the boundary runs south along the line separating Section 31 from Section 32, continuing south along Covey Road (shown on the map as an unnamed, light-duty road) to the town of Forestville where Covey Road intersects with State Highway 116 (Gravenstein Highway).</P>
          <P>(2) Thence east along State Highway 116 until it turns in a southeasterly direction and then proceeding along State Highway 116 in a southeasterly direction until the point at which State Highway 116 intersects State Highway 12 in the town of Sebastopol (located on the “Sebastopol Quadrangle” map);</P>
          <P>(3) Thence in a southwesterly direction on State Highway 12 through the town of Sebastopol;</P>
          <P>(4) Thence in a westerly direction on State Highway 12, which becomes Bodega Road, until Bodega Road intersects with Pleasant Hill Road;</P>
          <P>(5) Thence in a southerly direction on Pleasant Hill Road until it intersects with Water Trough Road;</P>
          <P>(6) Thence westerly and then northwesterly on Water Trough Road until it intersects with Gold Ridge Road;</P>
          <P>(7) Thence in a southwesterly, northwesterly, and then a northeasterly direction along Gold Ridge Road until it intersects with Bodega Road;</P>

          <P>(8) Thence in a southwesterly direction along Bodega Road until Bodega Road intersects with Jonive Road in Township 6 North (T.6N.), Range 9 West (R.9W.) located in the southeast portion of U.S.G.S. map “Camp Meeker Quadrangle”;<PRTPAGE P="142"/>
          </P>
          <P>(9) Thence proceeding in a northwesterly direction on Jonive Road until it intersects Occidental Road;</P>
          <P>(10) Thence proceeding on Occidental Road in a northwesterly direction until Occidental Road intersects the west border of Section 35;</P>
          <P>(11) Thence proceeding due north along the west borders of Sections 35, 26, 23, and 14 to the northwest corner of Section 14;</P>
          <P>(12) Thence in an easterly direction along the north border of Section 14 to the northeast corner of Section 14;</P>
          <P>(13) Thence north along the west borders of Sections 12, 1, and 36 to the northwest corner of Section 36 located in the extreme southern portion of the “Guerneville Quadrangle” map;</P>
          <P>(14) Thence in an easterly direction along the north border of Section 36 until it intersects with River Road;</P>
          <P>(15) Thence in a southeasterly direction along River Road to the point of beginning located on the “Camp Meeker Quadrangle” map.</P>
          <CITA>[T.D. ATF-161, 48 FR 52579, Nov. 21, 1983]</CITA>
          <EFFDNOTP>
            <HD SOURCE="HED">Effective Date Note:</HD>
            <P>At 72 FR 13692, Mar. 23, 2007, § 9,57 was amended by revising the section heading, paragraph (a), the introductory text of paragraph (b), and the introductory text of paragraph (c) and adding a new paragraph (d), effective April 23, 2007. For the convenience of the user, the added and revised text is set forth as follows:</P>
            <REVTXT>
              <SECTION>
                <SECTNO>§ 9.57</SECTNO>
                <SUBJECT>Green Valley of Russian River Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Green Valley of Russian River Valley”. For purposes of part 4 of this chapter, “Green Valley of Russian River Valley” is a term of viticultural significance. “Sonoma County Green Valley” is also a term of viticultural significance until April 23, 2009.</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Green Valley of Russian River Valley viticultural area are three United States Geological Survey maps. They are titled:<STARS/>
                </P>
                <P>(c) <E T="03">Boundary.</E> The Green Valley of Russian River Valley viticultural area is located in Sonoma County, California. The beginning point is located in the northeastern portion of the “Camp Meeker Quadrangle” map where the line separating Section 31 from Section 32, in Township 8 North (T.8N.), Range 9 West (R.9W.) intersects River Road.<STARS/>
                </P>
                <P>(d) From December 21, 1983, until April 23, 2007, the name of this viticultural area was “Sonoma County Green Valley”. Effective April 23, 2007, this viticulture area is named “Green Valley of Russian River Valley”. Existing certificates of label approval showing “Sonoma County Green Valley” as the appellation of origin will be revoked by operation of this regulation on April 23, 2009.</P>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.58</SECTNO>
                <SUBJECT>Carmel Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Carmel Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Carmel Valley viticultural area are five U.S.G.S. topographic maps in the 7.5 minute series, as follows:</P>
                <P>(1) Mt. Carmel, Calif., dated 1956;</P>
                <P>(2) Carmel Valley, Calif., dated 1956;</P>
                <P>(3) Ventana Cones, Calif., dated 1956;</P>
                <P>(4) Chews Ridge, Calif., dated 1956; and</P>
                <P>(5) Rana Creek, Calif., dated 1956.</P>
                <P>(c) <E T="03">Boundary.</E> The Carmel Valley viticultural area is located in Monterey County, California. The boundary is as follows:</P>
                <P>(1) The beginning point is the northeast corner of Section 5 in Township 17 South, Range 2 East.</P>
                <P>(2) The boundary follows the Los Laurelles Land Grant boundary south, then easterly, to the north-south section line dividing Section 9 from Section 10 in Township 17 South, Range 2 East.</P>
                <P>(3) The boundary follows this section line south to the southwest corner of Section 22 in Township 17 South, Range 2 East.</P>
                <P>(4) From this point, the boundary follows section lines in Township 17 South, Range 2 East:</P>
                <P>(i) To the southeast corner of Section 22,</P>
                <P>(ii) To the southwest corner of Section 26,</P>
                <P>(iii) To the southeast corner of Section 26,</P>
                <P>(iv) To the southwest corner of Section 36.</P>

                <P>(5) From this point, the boundary follows the Los Padres National Forest boundary east, then south, then east to <PRTPAGE P="143"/>the southwest corner of Section 9 in Township 18 South, Range 3 East.</P>
                <P>(6) The boundary follows the section line east to the southeast corner of the same section, where the section line rejoins the Los Padres National Forest boundary.</P>
                <P>(7) The boundary follows the Los Padres National Forest boundary to the north-south section line dividing Section 11 from Section 12 in Township 18 South, Range 3 East.</P>
                <P>(8) The boundary follows this section line north to the township line dividing Township 17 South from Township 18 South.</P>
                <P>(9) The boundary follows this township line west to the north-south section line dividing Section 34 from Section 35 in Township 17 South, Range 3 East.</P>
                <P>(10) The boundary follows this section line north to the Los Tularcitos Land Grant boundary.</P>
                <P>(11) The boundary follows the Los Tularcitos Land Grant boundary northwesterly to the Carmel River.</P>
                <P>(12) The boundary follows the Carmel River northerly to the Los Tularcitos Land Grant boundary.</P>
                <P>(13) The boundary follows the Los Tularcitos Land Grant boundary northeasterly to the unsurveyed township line (approximate location denoted by a line of red dashes) dividing Township 16 South form Township 17 South.</P>
                <P>(14) The boundary follows the unsurveyed township line west to the beginning point.</P>
                <CITA>[T.D. ATF-119, 47 FR 55916, Dec. 14, 1982]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.59</SECTNO>
                <SUBJECT>Arroyo Seco.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Arroyo Seco.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Arroyo Seco viticultural area are four U.S.G.S. quadrangle maps. They are entitled:</P>
                <P>(1) “Greenfield, California,” 7.5 minute series, edition of 1956;</P>
                <P>(2) “Paraiso Springs, California,” 7.5 minute series, edition of 1956;</P>
                <P>(3) “Soledad, California,” 7.5 minute series, edition of 1955; and</P>
                <P>(4) “Sycamore Flat, California,” 7.5 minute series, edition of 1956 (photoinspected 1972).</P>
                <P>(c) <E T="03">Boundaries.</E> The Arroyo Seco viticultural area is located in Monterey County, California. The beginning point is found on the “Sycamore Flat” U.S.G.S. map at the junction of Arroyo Seco Road and the Carmel Valley Road (indicated as the Jamesburg Road on the map).</P>
                <P>(1) Then east following Arroyo Seco Road to the southwest corner of Section 22, T. 19 S., R. 5 E.</P>
                <P>(2) Then east following the southern boundaries of Sections 22, 23, 24, 19, and 20 to the southeastern corner of Section 20, T. 19 S., R. 6 E.</P>
                <P>(3) Then northeast in a straight line for approximately 1.3 miles to the summit of Pettits Peak.</P>
                <P>(4) Then northeast in a straight line for approximately 1.8 miles to the point where the 400′ contour line intersects the northern boundary of Section 14, T. 19 S., R. 6 E.</P>
                <P>(5) Then east following the 400′ contour line to a point immediately west of the Reservoir within the Posa de los Ositos Land Grant.</P>
                <P>(6) Then following the ridge line in a northeasterly direction for approximately 7.5 miles to U.S. Highway 101 at the intersection of Underwood Road.</P>
                <P>(7) Then east following Underwood Road to its intersection with the Posa de los Ositos Land Grant.</P>
                <P>(8) Then north following the boundary of the Posa de los Ositos Land Grant to the west bank of the Salinas River.</P>
                <P>(9) Then northwest following the west bank of the Salinas River to the southern boundary of Section 17, T. 18 S., R. 7 E.</P>
                <P>(10) Then due west for approximately 2.0 miles following the southern boundary of Section 17, and continuing to U.S. Highway 101.</P>
                <P>(11) Then following U.S. Highway 101 in a northwesterly direction to its intersection with Paraiso Road.</P>
                <P>(12) Then south following Paraiso Road to the intersection with Clark Road.</P>
                <P>(13) Then east-northeasterly along Clark Road for approximately 1,000 feet to its intersection with an unnamed light-duty road to the south.</P>

                <P>(14) Then in a straight south-southeasterly line for approximately 1.9 miles to the line's intersection with <PRTPAGE P="144"/>the southeast corner of section 33, T18S, R6E (this line coincides with the unnamed light duty road for approximately 0.4 miles and then with the eastern boundaries of sections 29, 32 and 33, T18S, R6E, which mark this portion of the western boundary of the historical Arroyo Seco Land Grant).</P>
                <P>(15) Then straight west along the southern boundary of section 33, T18S, R6E, to its southwest corner.</P>
                <P>(16) Then due south following the eastern boundaries of Sections 5, 8, and 17, to Arroyo Seco Road.</P>
                <P>(17) Then southwest in a straight line for approximately 1.0 mile to Bench Mark 673.</P>
                <P>(18) Then west in a straight line for approximately 1.8 miles to Bench Mark 649.</P>
                <P>(19) Then northwest in a straight line for approximately 0.2 mile to the northeast corner of Section 23, T. 19 S., R. 5 E.</P>
                <P>(20) Then west following the northern boundaries of Section 23 and 22 to the northwest corner of Section 22, T. 19 S., R. 5 E.</P>
                <P>(21) Then south in a straight line for approximately 1.0 mile to the point of beginning.</P>
                <CITA>[T.D. ATF-131, 48 FR 16246, Apr. 15, 1983, as amended by T.D. TTB-49, 71 FR 34527, June 15, 2006]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.60</SECTNO>
                <SUBJECT>Shenandoah Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Shenandoah Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Shenandoah Valley viticultural area are four U.S.G.S. Eastern United States 1:250,000 scale maps. The maps are titled: Roanoke (1971), Charlottesville (1956, with a revision in 1965), Cumberland (1956, revised 1969) and Baltimore (1957, revised 1978).</P>
                <P>(c) <E T="03">Boundaries.</E> The Shenandoah Valley Viticultural area is located in Frederick, Clarke, Warren, Shenandoah, Page, Rockingham, Augusta, Rockbridge, Botetourt, and Amherst Counties in Virginia, and Berkeley and Jefferson Counties in West Virginia. The boundaries are as follows:</P>
                <P>(1) The boundary line starts at the point of the intersection of the Potomac River and the Virginia-West Virginia State line approximately eight miles east of Charlestown, West Virginia.</P>
                <P>(2) Then the boundary proceeds southwesterly approximately 14.8 miles along the State line, which essentially follows the crest of the Blue Ridge Mountains, to its intersection with the western border line of Clarke County, Virginia.</P>
                <P>(3) Then the boundary continues approximately 13.8 miles southwesterly along the county line and the crest of the Blue Ridge to its intersection with the western boundary line of Warren County, Virginia.</P>
                <P>(4) Then the boundary continues approximately 15 miles along the Warren County line to its intersection with the Skyline Drive.</P>
                <P>(5) Then the boundary continues approximately 71 miles in a southwesterly direction along the Skyline Drive and the Blue Ridge to its intersection with the Blue Ridge Parkway.</P>
                <P>(6) Then the boundary continues approximately 53 miles in a southeasterly direction along the Blue Ridge Parkway to its intersection with the James River.</P>
                <P>(7) Then the boundary proceeds approximately 44 miles along the James River in a west-northwesterly direction to its intersection with the northwest boundary line of the Jefferson National Forest near Eagle Rock.</P>
                <P>(8) Then the boundary proceeds approximately 10.5 miles in a northeasterly direction along the Jefferson National Forest line and along the crest of North Mountain to its intersection with the western boundary line of Rockbridge County.</P>
                <P>(9) Then the boundary continues approximately 23 miles along the county line in the same northeasterly direction to its intersection with the Chesapeake and Ohio Railroad.</P>
                <P>(10) Then the boundary continues approximately 23 miles along the railroad between the Great North Mountain and the Little North Mountain to its intersection with the southeastern boundary line of the George Washington National Forest at Buffalo Gap.</P>

                <P>(11) Then the boundary continues approximately 81 miles northeasterly along the George Washington National Forest Line to the Vertical Control <PRTPAGE P="145"/>Station, (elevation 1883), on the crest of Little North Mountain approximately 3 miles west of Van Buren Furnace.</P>
                <P>(12) Then the boundary line continues approximately 53 miles northeasterly along the crest of Little North Mountain to its intersection with the Potomac River in Fort Frederick State Park.</P>
                <P>(13) Then the boundary continues approximately 47.4 miles southeasterly along the Potomac River to the beginning point at that Rivers intersection with the boundary line between West Virginia and Virginia.</P>
                <CITA>[T.D. ATF-120, 47 FR 57698, Dec. 28, 1982, as amended by T.D. ATF-249, 52 FR 5958, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.61</SECTNO>
                <SUBJECT>El Dorado.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “El Dorado.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved U.S.G.S. topographic maps (7.5 series; quadrangles) showing the boundaries of the El Dorado viticultural area, including quadrangles showing the area within the boundaries, are as follows:</P>
                <P>(1) “Pilot Hill, California,” 1954 (photorevised 1973);</P>
                <P>(2) “Auburn, California,” 1953 (photorevised 1973);</P>
                <P>(3) “Greenwood, California,” 1949 (photorevised 1973);</P>
                <P>(4) “Georgetown, California,” 1949 (photorevised 1973);</P>
                <P>(5) “Foresthill, California,” 1949 (photorevised 1973);</P>
                <P>(6) “Michigan Bluff, California,” 1952 (photorevised 1973);</P>
                <P>(7) “Tunnel Hill, California,” 1950 (photorevised 1973);</P>
                <P>(8) “Slate Mountain, California,” 1950 (photorevised 1973);</P>
                <P>(9) “Pollock Pines, California,” 1950 (photorevised 1973);</P>
                <P>(10) “Stump Spring, California,” 1951 (photorevised 1973);</P>
                <P>(11) “Caldor, California,” 1951 (photorevised 1973);</P>
                <P>(12) “Omo Ranch, California,” 1952 (photorevised 1973);</P>
                <P>(13) “Aukum, California,” 1952 (photorevised 1973);</P>
                <P>(14) “Fiddletown, California,” 1949;</P>
                <P>(15) “Latrobe, California,” 1949 (photorevised 1973);</P>
                <P>(16) “Shingle Springs, California,” 1949;</P>
                <P>(17) “Coloma, California,” 1949 (photorevised 1973);</P>
                <P>(18) “Garden Valley, California,” 1949 (photorevised 1973);</P>
                <P>(19) “Placerville, California,” 1949 (photorevised 1973);</P>
                <P>(20) “Camino, California,” 1952 (photorevised 1973);</P>
                <P>(21) “Sly Park, California,” 1952 (photorevised 1973);</P>
                <P>(c) <E T="03">Boundaries.</E> The boundaries of the El Dorado viticultural area which is located in El Dorado County, California, are as follows:</P>
                <P>(1) The beginning point of the boundaries is the intersection of the North Fork of the American River (also the boundary line between El Dorado and Placer Counties) and the township line “T. 11 N./T. 12 N.” (“Pilot Hill” Quadrangle);</P>
                <P>(2) Thence northeast along the North Fork of the American River to its divergence with the Middle Fork of the American River, continuing then, following the Middle Fork of the American River to its intersection with the Rubicon River which continues as the boundary line between El Dorado and Placer Counties (“Auburn,” “Greenwood,” “Georgetown,” “Foresthill,” and “Michigan Bluff” Quadrangles);</P>
                <P>(3) Thence southeast along the Rubicon River to its intersection with the range line “R. 11 E./R. 12 E.” (“Tunnel Hill” Quadrangle);</P>
                <P>(4) Thence south along the range line through T. 13 N. and T. 12 N., to its intersection with the township line “T. 12 N./T. 11 N.” (“Tunnel Hill” and “Slate Mountain” Quadrangles);</P>
                <P>(5) Thence east along the range line to its intersection with the range line “R. 12 E./R. 13 E.” (“Slate Mountains” and “Pollock Pines” Quadrangles);</P>
                <P>(6) Thence south along the range line to its intersection with the township line “T. 11 N./T. 10 N.” (“Pollock Pines” Quadrangle);</P>
                <P>(7) Thence east along the township line to its intersection with the range line “R. 13 E./R. 14 E.” (“Pollock Pines” and “Stump Spring” Quadrangles);</P>

                <P>(8) Thence south along the range line through T. 10 N., T. 9 N., and T. 8 N. to its intersection with the South Fork of <PRTPAGE P="146"/>the Cosumnes River (also the boundary line between El Dorado and Amador Counties) (“Stump Spring” and “Caldor” Quadrangles);</P>
                <P>(9) Thence west and northwest along the South Fork of the Cosumnes River to its intersection with range line “R. 11 E./R. 10 E.” (“Caldor,” “Omo Ranch,” “Aukum,” and “Fiddletown” Quadrangles);</P>
                <P>(10) Thence north along the range line to its intersection with the township line “T. 8 N./T. 9 N.” (“Fiddletown” Quadrangle);</P>
                <P>(11) Thence west along the township line to its intersection with range line “R. 10 E./R. 9 E.” (“Fiddletown” and “Latrobe” Quadrangles);</P>
                <P>(12) Thence north along the range line to its intersection with U.S. Route 50;</P>
                <P>(13) Thence west along U.S. Route 50 to its intersection with Cameron Park Drive;</P>
                <P>(14) Thence north along Cameron Park Drive to its intersection with Green Valley Road;</P>
                <P>(15) Thence east along Green Valley Road to its intersection with range line R.10 E/ R.9 E;</P>
                <P>(16) Thence north along the range line to its intersection with the township line T.10 N./ T.11 N;</P>
                <P>(17) Thence east along the township line approximately 4,000 feet to its intersection with the range line “R. 9 E./R. 10 E.” (“Coloma” Quadrangle);</P>
                <P>(18) Thence north on the range line to its intersection with the township line “T. 11 N./T. 12 N.” (“Coloma” Quadrangle); and</P>
                <P>(19) Thence west along the township line to the point of beginning (“Coloma” and “Pilot Hill” Quadrangles).</P>
                <CITA>[T.D. ATF-152, 48 FR 46520, Oct. 13, 1983, as amended by T.D. ATF-254, 52 FR 23651, June 24, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.62</SECTNO>
                <SUBJECT>Loramie Creek.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Loramie Creek.”</P>
                <P>(b) <E T="03">Approved map.</E> The approved map for the Loramie Creek viticultural area is the U.S.G.S. map entitled “Fort Loramie Quadrangle, Ohio—Shelby Co.,” 7.5 minute series (topographic), 1961 (photoinspected 1973).</P>
                <P>(c) <E T="03">Boundaries.</E> The Loramie Creek viticultural area is located entirely within Shelby County, Ohio. The boundaries are as follows:</P>
                <P>(1) From the beginning point of the boundary at the intersection of State Route 47 and Wright-Puthoff Road, the boundary runs southward on Wright-Puthoff Road for a distance of 1<FR>3/8</FR> miles to the intersection of the Wright-Puthoff Road with Consolidated Railroad Corporation (indicated on the U.S.G.S. map as New York Central Railroad);</P>
                <P>(2) Then along the Consolidated Railroad Corporation right-of-way in a southwesterly direction for a distance of 2<FR>1/8</FR> miles to the intersection of the Consolidated Railroad Corporation right-of-way with Loramie Creek;</P>
                <P>(3) Then upstream along Loramie Creek in a northwesterly direction for a distance of approximately 3<FR>1/2</FR> miles to the intersection of Loramie Creek and State Route 47;</P>
                <P>(4) Then eastward on State Route 47 for a distance of approximately 4<FR>1/8</FR> miles to the beginning point of State Route 47 and Wright-Puthoff Road.</P>
                <CITA>[T.D. ATF-118, 47 FR 53356, Nov. 26, 1982]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.63</SECTNO>
                <SUBJECT>Linganore.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Linganore.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Linganor viticultural area are five U.S.G.S topographic maps. They are—</P>
                <P>(1) “Walkersville Quadrangle, Maryland—Frederick Co.”, 7.5 minute series, 1953 (Photorevised 1979);</P>
                <P>(2) “Libertytown Quadrangle, Maryland”, 7.5 minute series, 1944 (Photorevised 1971);</P>
                <P>(3) “Damascus Quadrangle, Maryland”, 7.5 minute series, 1944 (Photorevised 1979);</P>
                <P>(4) “Winfield Quadrangle, Maryland”, 7.5 minute series, 1950 (Photorevised 1979); and</P>
                <P>(5) “Union Bridge Quadrangle, Maryland,” 7.5 minute series, 1953 (Photorevised 1971).</P>
                <P>(c) <E T="03">Boundaries.</E> The Linganore viticultural area is located in north central Maryland and encompasses parts of Frederick and Carroll Counties. From the beginning point lying at <PRTPAGE P="147"/>the confluence of Linganore Creek and the Monocacy River, on the Walkersville Quadrangle map, the boundary runs—</P>
                <P>(1) South-southeasterly 5,000 feet in a straight line to the point lying approximately 1,000 feet south of Interstate Highway 70 at the intersection of two unnamed light duty roads in the town of Bartonsville;</P>
                <P>(2) Then east-southeasterly 15,500 feet in a straight line to the point lying at the intersection of Mussetter Road and latitude line 39 degrees 22 minutes 30 seconds;</P>
                <P>(3) Then east-northeasterly 8,125 feet in a straight line to the point lying at the intersection of Mill Road and State Highway 144;</P>
                <P>(4) Then easterly along State Highway 144 on the Walkersville Quadrangle, Libertytown Quadrangle, and Damascus Quadrangle maps to the point of intersection with State Highway 27, approximately midway between the towns of Ridgeville and Parrsville, on the Damascus Quadrangle map;</P>
                <P>(5) Then northeasterly along State Highway 27 on the Damascus Quadrangle, Libertytown Quadrangle, and Winfield Quadrangle maps to the point of intersection with State Highway 26 in the town of Taylorsville on the Winfield Quadrangle map;</P>
                <P>(6) Then northerly 2,750 feet in a straight line to the point on a hill identified as having an elevation of 850 feet;</P>
                <P>(7) Then northwesterly 21,000 feet in a straight line to the point lying at the intersection of State Highway 31 and latitude line 39 degrees 30 minutes on the Libertytown Quadrangle and Union Bridge Quadrangle maps;</P>
                <P>(8) Then westerly 15,625 feet along latitude line 39 degrees 30 minutes to the point of intersection with Copper Mine Road;</P>
                <P>(9) Then northwesterly along Copper Mine Road on the Union Bridge Quadrangle map to the point of intersection with longitude line 77 degrees 15 minutes;</P>
                <P>(10) Then southerly 5,250 feet along longitude line 77 degrees 15 minutes to the point of intersection with latitude line 39 degrees 30 minutes on the Union Bridge Quadrangle and Walkersville Quadrangle maps;</P>
                <P>(11) Then southwesterly 46,750 feet in a straight line on the Walkersville Quadrangle map to the point of beginning.</P>
                <CITA>[T.D. ATF-140, 48 FR 37374, Aug. 18, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.64</SECTNO>
                <SUBJECT>Dry Creek Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Dry Creek Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Dry Creek Valley viticultural area are six U.S.G.S. topographic maps. They are—</P>
                <P>(1) “Geyserville Quadrangle, California—Sonoma County,” 7.5 minute series, 1955 (Photorevised 1975);</P>
                <P>(2) “Jimtown Quadrangle, California—Sonoma County,” 7.5 minute series, 1955 (Photorevised 1975);</P>
                <P>(3) “Healdsburg Quadrangle, California—Sonoma County,” 7.5 minute series, 1955 (Photorevised 1980);</P>
                <P>(4) “Guerneville Quadrangle, California—Sonoma County,” 7.5 minute series, 1955;</P>
                <P>(5) “Cazadero Quadrangle, California—Sonoma County,” 7.5 minute series, 1978; and</P>
                <P>(6) “Warm Springs Dam Quadrangle (formerly ‘Skaggs Springs Quadrangle’), California—Sonoma County,” 7.5 minute series, 1978.</P>
                <P>(c) <E T="03">Boundaries.</E> The Dry Creek Valley viticultural area is located in north central Sonoma County, California. From the beginning point, lying at the intersection of latitude line 38 degrees 45 minutes and the northwest corner of Section 5, T. 10 N., R. 10 W. on the “Geyserville Quadrangle” map, the boundary runs—</P>
                <P>(1) Southeasterly in a straight line approximately 11,000 feet (closely following the ridge line) to the northeast corner of Section 9, T. 10 N., R. 10 W.;</P>
                <P>(2) Then southerly along the east line of Section 9 to the southeast corner thereof;</P>
                <P>(3) Then S. 74 degrees, E. 2,800 feet in a straight line to the northeasterly tip of a small unnamed lake;</P>
                <P>(4) Then N. 57 degrees, E. 2,300 feet in a straight line to the southeast corner of Section 10, T. 10 N., R. 10 W.;</P>

                <P>(5) Then S. 16 degrees, E. 1,800 feet in a straight line to the point on a peak <PRTPAGE P="148"/>identified as having an elevation of 664 feet;</P>
                <P>(6) Then S. 55 degrees, E. 7,900 feet in a straight line to the most northerly point on the northeasterly line of “Olive Hill” cemetery lying on the easterly side of Canyon Road;</P>
                <P>(7) Then southeasterly along the northeasterly line of “Olive Hill” cemetery to the most easterly point thereon;</P>
                <P>(8) Then S. 2 degrees, E. 3,100 feet in a straight line to the point in the westerly fork of Wood Creek lying at the westerly terminus of a dirt road;</P>
                <P>(9) Then southerly 3,000 feet along the west fork of Wood Creek to the point lying 400 feet north of the point on a peak identified as having an elevation of 781 feet;</P>
                <P>(10) Then southerly 400 feet in a straight line to the point on a peak identified as having an elevation of 781 feet;</P>
                <P>(11) Then S. 50<FR>1/2</FR> degrees, E. 15,500 feet in a straight line to the point lying at the intersection of Lytton Creek and the township line common to T. 9 N. and T. 10 N. in R. 9 W.;</P>
                <P>(12) Then southerly along the meanders of Lytton Creek to the point of intersection with Lytton Springs Road in T. 9 N., R. 9 W.;</P>
                <P>(13) Then easterly along Lytton Springs Road to the point of intersection with U.S. Highway 101 (a.k.a. Redwood Highway) on the “Jimtown Quadrangle” map;</P>
                <P>(14) Then southerly along U.S. Highway 101 to the point of intersection with an unnamed light duty road (known locally as Chiquita Road) on the “Geyserville Quadrangle” map;</P>
                <P>(15) Then easterly along the unnamed light duty road to the point of intersection with an unnamed heavy duty road (known locally as Healdsburg Avenue) on the “Jimtown Quadrangle” map;</P>
                <P>(16) Then southerly along the unnamed heavy duty road through the town of Healdsburg to the point of intersection with the Russian River on the “Healdsburg Quadrangle” map;</P>
                <P>(17) Then southerly along the meanders of the Russian River to the confluence of Dry Creek;</P>
                <P>(18) Then west-southwesterly 1,300 feet in a straight line to an unnamed light duty road (known locally as Foreman Lane);</P>
                <P>(19) Then westerly along the unnamed light duty road, crossing West Dry Creek Road and passing Felta School, to the point of intersection with Felta Creek on the “Guerneville Quadrangle” map;</P>
                <P>(20) Then southwesterly 18,000 feet along the meanders of Felta Creek to the point lying at the intersection of three springs in T. 8 N., R. 10 W., approximately 300 feet east from the word “Springs”;</P>
                <P>(21) Then S. 58 degrees, W. 15,000 feet in a straight line to the southwest corner of Section 9, T. 8 N., R. 10 W.;</P>
                <P>(22) Then northerly along the west line of Sections 9 and 4, T. 8 N., R. 10 W., continuing along the west line of Section 33, T. 9 N., R. 10 W. to the northwest corner thereof;</P>
                <P>(23) Then westerly along the south line of Sections 29 and 30, T. 9 N., R. 10 W. to the southwest corner of Section 30 on the “Cazadero Quadrangle” map;</P>
                <P>(24) Then northerly along the west line of Sections 30 and 19, T. 9 N., R. 10 W. to the northwest corner of Section 19;</P>
                <P>(25) Then westerly along the south line of Section 13, T. 9 N., R. 11 W. to the southwest corner thereof;</P>
                <P>(26) Then southwesterly 14,200 feet in a straight line to the northeast corner of Section 20, T. 9 N., R. 11 W.;</P>
                <P>(27) Then westerly along the north line of Section 20 to the northwest corner thereof;</P>
                <P>(28) Then northerly along the east line of Sections 18, 7, and 6, T. 9 N., R. 11 W., continuing along the east line of Sections 31, 30, 19, 18, 7, and 6, T. 10 N., R. 11 W. to the point of intersection with latitude line 38 degrees 45 minutes on the “Warm Springs Dam Quadrangle” map; and</P>
                <P>(29) Then easterly along latitude line 38 degrees 45 minutes to the point of beginning on the “Geyserville Quadrangle” map.</P>
                <CITA>[T.D. ATF-137, 48 FR 35397, Aug. 4, 1983, as amended by T.D. ATF-468, 66 FR 50565, Oct. 4, 2001]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.65</SECTNO>
                <SUBJECT>North Fork of Roanoke.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “North Fork of Roanoke.”<PRTPAGE P="149"/>
                </P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the North Fork of Roanoke viticultural area are six U.S.G.S. Virginia, 7.5 minute series maps. They are:</P>
                <P>(1) McDonalds Mill Quadrangle, 1965;</P>
                <P>(2) Glenvar Quadrangle, 1965;</P>
                <P>(3) Elliston Quadrangle, 1965;</P>
                <P>(4) Ironto Quadrangle, 1965;</P>
                <P>(5) Blacksburg Quadrangle, 1965; and</P>
                <P>(6) Newport Quadrangle, 1965.</P>
                <P>(c) <E T="03">Boundaries.</E> The North Fork of Roanoke viticultural area is located in parts of Roanoke and Montgomery Counties in southern Virginia.</P>
                <P>(1) The point of the beginning is in the north at the intersection of State Routes 785 and 697 in Roanoke County.</P>
                <P>(2) Then the boundary follows State Route 697 northeast over Crawford Ridge to the intersection at State Route 624.</P>
                <P>(3) Then the boundary turns southwest on State Route 624 along the boundary of the Jefferson National Forest and then continues across the Montgomery County line to U.S. 460 (business).</P>
                <P>(4) Then the boundary follows U.S. Route 460 (business) south through the town of Blacksburg.</P>
                <P>(5) Then the boundary continues on U.S. Route 460 (bypass) to the intersection of U.S. Route 460 East, where it turns east for approximately one mile to the intersection of U.S. Interstate Highway 81 at Interchange 37.</P>
                <P>(6) Then the boundary continues northeast on Interstate Highway 81 to its intersection with State Route 603 at interchange 38.</P>
                <P>(7) Then the boundary continues northwest on State Route 603 to its intersection with State Route 629.</P>
                <P>(8) Then the boundary follows State Route 629 (which later becomes State Route 622 north of Brandshaw Creek) 2 miles across the Roanoke County line to where it intersects the Chesapeake and Potomac Telephone Company right-of-way.</P>
                <P>(9) Then the boundary turns northwest along the C &amp; P right-of-way over Pearis Mountain to the point where the right-of-way intersects State Route 785, one quarter mile northeast of the intersections of State Routes 785 and 697.</P>
                <P>(10) Then the boundary follows State Route 784 back to the beginning point.</P>
                <CITA>[T.D. ATF-129, 48 FR 16250, Apr. 15, 1983, as amended by T.D. ATF-249, 52 FR 5958, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.66</SECTNO>
                <SUBJECT>Russian River Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Russian River Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Russian River Valley viticultural area are 11 United States Geological Survey 1:24,000 Scale topographic maps. They are titled:</P>
                <P>(1) Healdsburg, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1993;</P>
                <P>(2) Guerneville, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1993;</P>
                <P>(3) Cazadero, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1978;</P>
                <P>(4) Duncans Mills California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1979;</P>
                <P>(5) Camp Meeker, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1995;</P>
                <P>(6) Valley Ford, California Quadrangle, 7.5 Minute Series, edition of 1954; photorevised 1971;</P>
                <P>(7) Two Rock, California Quadrangle, 7.5 Minute Series, edition of 1954; photorevised 1971;</P>
                <P>(8) Sebastopol, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1954; photorevised 1980;</P>
                <P>(9) Santa Rosa, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1954; and</P>
                <P>(10) Mark West Springs, California Quadrangle, 7.5 Minute Series, edition of 1998, and</P>
                <P>(11) Jimtown, California Quadrangle—Sonoma Co., 7.5 Minute Series, edition of 1993.</P>
                <P>(c) <E T="03">Boundaries.</E> The Russian River Valley viticultural area is located in Sonoma County, California.</P>

                <P>(1) Starting point Healdsburg map-Healdsburg Avenue Bridge over the Russian River at Healdsburg. Proceed south along Russian River to the point where Russian River and Dry Creek converge, from this point proceed west in a straight line to Forman Lane.<PRTPAGE P="150"/>
                </P>
                <P>(2) Proceed west along Foreman Lane to where it crosses Westside Road and becomes Felta School Road.</P>
                <P>(3) Proceed west on Felta School Road to the point where it crosses Felta Creek.</P>

                <P>(4) Proceed 18000′ up Felta Creek to its headwaters as shown on the <E T="03">Guerneville, map</E> as “Springs.”</P>
                <P>(5) Proceed southwest in a straight line 58 degrees W 27000′ to an intersection with Hulbert Creek on the Cazadero map.</P>
                <P>(6) Proceed south and southeast along Hulbert Creek to the point where it intersects California Hwy 116 on the Duncan Mills map.</P>
                <P>(7) Proceed in a westerly direction along California Hwy 116 to Monte Rio where it intersects the Bohemian Hwy.</P>
                <P>(8) Proceed southeast along the Bohemian Highway, crossing over the Camp Meeker map, to the town of Freestone, where the highway intersects at BM 214 with an unnamed medium-duty road (known locally as Bodega Road, section 12, T6N, R10W, on the Valley Ford map).</P>
                <P>(9) Proceed 0.9 mile northeast on Bodega Road to its intersection, at BM 486, with Jonvive Road to the north and an unnamed light duty road to the south, (known locally as Barnett Valley Road, T6N, R9W, on the Camp Meeker map).</P>
                <P>(10) Proceed 2.2 miles south, and then east, on Barnett Valley Road, crossing over the Valley Ford map, to its intersection with Burnside Road in section 17, T6N, R9W, on the Two Rock map.</P>
                <P>(11) Proceed 3.3 miles southeast on Burnside Road to its intersection with an unnamed medium duty road at BM 375, T6N, R9W, on the Two Rock map.</P>
                <P>(12) Proceed 0.6 mile straight southeast to an unnamed 610-foot elevation peak, 1.5 miles southwest of Canfield School, T6N, R9W, on the Two Rock map.</P>
                <P>(13) Proceed 0.75 mile straight east-southeast to an unnamed 641-foot elevation peak, 1.4 miles south-southwest of Canfield School, T6N, R9W, on the Two Rock map.</P>
                <P>(14) Proceed 0.85 mile straight northeast to the intersection with an unnamed intermittent stream and Canfield Road; continue 0.3 mile straight in the same northeast line of direction to its intersection with the common boundary of Ranges 8 and 9, just west of an unnamed unimproved dirt road, T6N, on the Two Rock map.</P>
                <P>(15) Proceed 1.8 miles straight north along the common Range 8 and 9 boundary line to its intersection with Blucher Creek, T6N, on the Two Rock map.</P>
                <P>(16) Proceed 1.25 miles generally northeast along Blucher Creek to its intersection with Highway 116, also known as Gravenstein Highway, in section 18, T6N, R8W, on the Two Rock map.</P>
                <P>(17) Proceed 0.2 mile straight southeast along Highway 116 to its intersection with an unnamed light duty road to the north in section 18, T6N, R8W, on the Two Rock map.</P>
                <P>(18) Proceed 0.1 mile straight northwest along the unnamed light duty road to its intersection with an unnamed medium-duty road to the east, (known as Todd Road in section 18, T6N, R8W, on the Two Rock map).</P>
                <P>(19) Proceed 4.8 miles east, north, and east again along Todd Road, a medium-duty road, crossing over the Sebastopol map and then passing over U.S. Highway 101 and continuing straight east 0.1 mile to Todd Road's intersection with Santa Rosa Avenue, a primary road that is generally parallel to U.S. Highway 101, in section 2, T6N, R8W, on the Santa Rosa map.</P>
                <P>(20) Proceed 5.8 miles generally north along Santa Rosa Avenue, which becomes Mendocino Avenue, to its intersection with an unnamed secondary road, known locally as Bicentennial Way, 0.3 mile north-northwest of BM 161 on Mendocino Avenue, section 11, T7N, R8W, on the Santa Rosa map.</P>
                <P>(21) Proceed 2.5 miles straight north, crossing over the 906-foot elevation peak in section 35 of the Santa Rosa map, to its intersection with Mark West Springs Road and the meandering 280-foot elevation in section 26, T8N, R8W, of the Mark West Springs map.</P>

                <P>(22) Proceed 4.8 miles north-northwest along Mark West Springs Road, which becomes Porter Creek Road, to its intersection with Franz Valley Road, a light-duty road to the north of Porter Creek Road, in section 12, T8N, R8W, on the Mark West Springs map.<PRTPAGE P="151"/>
                </P>
                <P>(23) Proceed in a northerly direction along Franz Vally Road to the northerly most crossing of Franz Creek.</P>
                <P>(24) Proceed west along Franz Creek until it intersects the line separating Section 21 and Section 22.</P>
                <P>(25) Proceed south on this line separating Section 21 and 22 to the corner common to Section 21 and 22 and Section 27 and 28.</P>

                <P>(26) Proceed west from the common corner of Section 21 and 22 and 27 and 28 and in a straight line to the peak of Chalk Hill on the <E T="03">Healdsburg map</E>.</P>
                <P>(27) Proceed west from the peak of Chalk Hill in a straight line to the point where Brooks Creek joins the Russian River.</P>

                <P>(28) Proceed north west in a straight line 8000′ to a peak marked 772′ elv. on the <E T="03">Jimtown map.</E>
                </P>
                <P>(29) Proceed north west in a straight line from hill top 772′ elv. to hill top 596′ elv.</P>
                <P>(30) Proceed north west in a straight line from hill top 596′ elv. to hill top 516′ elv.</P>
                <P>(31) Proceed north west in a straight line from hill top 516′ elv. to hill top 530′ elv.</P>
                <P>(32) Proceed west in a straight line from hill top 530′ elv. to hill top 447′ elv.</P>
                <P>(33) Proceed west in a straight line from hill top 447′ elv. to the point where Alexander Valley Road meets Healdsburg Avenue.</P>

                <P>(34) Proceed south along Healdsburg Avenue through the city of Healdsburg on the <E T="03">Healdsburg map</E> to the point where it crosses the Russian River at the point of beginning.</P>
                <CITA>[T.D. ATF-159, 48 FR 48813, Oct. 21, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987; T.D. TTB-7, 68 FR 67370, Dec. 2, 2003; T.D. TTB-32, 70 FR 53299, Sept. 8, 2005]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.67</SECTNO>
                <SUBJECT>Catoctin.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Catoctin.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Catoctin viticultural area are 12 U.S.G.S. maps in the scale 1:24,000. They are—</P>
                <P>(1) “Point of Rocks Quadrangle, Maryland—Virginia,” 7.5 minute series, 1970;</P>
                <P>(2) “Buckeystown Quadrangle, Maryland,” 7.5 minute series, 1952 (Photorevised 1971);</P>
                <P>(3) “Frederick Quadrangle, Maryland,” 7.5 minute series, 1953 (Photorevised 1980);</P>
                <P>(4) “Catoctin Furnace Quadrangle, Maryland,” 7.5 minute series, 1953 (Photorevised 1979);</P>
                <P>(5) “Blue Ridge Summit Quadrangle, Maryland—Pennsylvania,” 7.5 minute series, 1953 (Photorevised 1971);</P>
                <P>(6) “Emmitsburg Quadrangle, Maryland—Pennsylvania,” 7.5 minute series, 1953 (Photorevised 1971);</P>
                <P>(7) “Smithsburg Quadrangle, Maryland—Pennsylvania,” 7.5 minute series, 1953 (Photorevised 1971);</P>
                <P>(8) “Myersville Quadrangle, Maryland,” 7.5 minute series, 1953 (Photorevised 1971);</P>
                <P>(9) “Funkstown Quadrangle, Maryland,” 7.5 minute series, 1953 (Photorevised 1971);</P>
                <P>(10) “Keedysville Quadrangle, Maryland—West Virginia,” 7.5 minute series, 1978;</P>
                <P>(11) “Harpers Ferry Quadrangle, Virginia—Maryland—West Virginia,” 7.5 minute series, 1969; and</P>
                <P>(12) “Charles Town Quadrangle, West Virginia—Virginia—Maryland,” 7.5 minute series, 1978;</P>
                <P>(13) “Middletown Quadrangle, Maryland,” 7.5 minute series, 1953 (photorevised 1979);</P>
                <P>(c) <E T="03">Boundaries.</E> The Catoctin viticultural area is located in western Maryland and encompasses parts of Frederick and Washington Counties. From the beginning point at the point where U.S. Highway 15 crosses the Potomac River and enters the land mass of Maryland on the “Point of Rocks Quadrangle” map, the boundary runs—</P>
                <P>(1) Northerly 1,100 feet in a straight line to the point of intersection with a 500-foot contour line;</P>

                <P>(2) Then northeasterly along the meanders of the 500-foot contour line on the “Point of Rocks Quadrangle,” “Buckeystown Quadrangle,” “Frederick Quadrangle,” “Catoctin Furnace Quadrangle,” “Blue Ridge Summit Quadrangle,” and “Emmitsburg Quadrangle” maps to the point of intersection with the Maryland—Pennsylvania State line on the “Emmitsburg Quadrangle” map;<PRTPAGE P="152"/>
                </P>
                <P>(3) Then west along the Maryland-Pennsylvania State line on the “Emmitsburg Quadrangle,” “Blue Ridge Summit Quadrangle,” and “Smithsburg Quadrangle” maps to the point of intersection with the first 800-foot contour line lying west of South Mountain on the “Smithsburg Quadrangle” map;</P>
                <P>(4) Then southwesterly along the meanders of the 800-foot contour line on the “Smithburg Quadrangle,” “Myersville Quadrangle,” “Funkstown Quadrangle,” and “Keedysville Quadrangle” maps to the point of intersection with an unnamed light duty road (known locally as Clevelandville Road) north of the town of Clevelandville on the “Keedysville Quadrangle” map;</P>
                <P>(5) Then southerly along the unnamed light duty road to the point of intersection with Reno Monument Road;</P>
                <P>(6) Then southwesterly 13,500 feet in a straight line to the point lying at the intersection of Highway 67 and Millbrook Road;</P>
                <P>(7) Then westerly along Millbrook Road to the point of intersection with Mount Briar Road;</P>
                <P>(8) Then northerly along Mount Briar Road to the point of intersection with a 500-foot contour line;</P>
                <P>(9) Then northerly along the 500-foot contour line to the point of intersection with Red Hill Road;</P>
                <P>(10) Then southerly along the 500-foot contour line to the point of intersection with Porterstown Road;</P>
                <P>(11) Then south-southwesterly 29,000 feet in a straight line to the most eastern point on the boundary line of the Chesapeake and Ohio Canal National Historical Park lying north of the town of Dargan;</P>
                <P>(12) Then southwesterly 7,500 feet in a straight line to the point of the “Harpers Ferry Quadrangle” map lying approximately 600 feet northwest of Manidokan Camp at the confluence of an unnamed stream and the Potomac River; and</P>
                <P>(13) Then easterly along the meanders of the Potomac River on the “Harpers Ferry Quadrangle,” “Charles Town Quadrangle,” and “Point of Rocks Quadrangle” maps to the point of beginning.</P>
                <CITA>[T.D. ATF-154, 48 FR 46523, Oct. 13, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.68</SECTNO>
                <SUBJECT>Merritt Island.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Merritt Island.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Merritt Island viticultural area are two U.S.G.S. maps, 7.5 minute series. They are entitled:</P>
                <P>(1) “Clarksburg Quadrangle, California,” 1967 (Photo revised 1980); and</P>
                <P>(2) “Courtland Quadrangle, California,” 1978.</P>
                <P>(c) <E T="03">Boundaries.</E> The Merritt Island viticultural area is located in Yolo County, California, six miles south of the City of Sacramento. The boundaries of the Merritt Island viticultural area, using landmarks and points of reference found on the appropriate U.S.G.S. maps, are as follows:</P>
                <P>(1) Starting at the most southernly point, the intersection of Sutter Slough with the Sacramento River.</P>
                <P>(2) Then west along the course of Sutter Slough for 0.54 miles until it intersects Elk Slough.</P>
                <P>(3) Then northeast along the course of Elk Slough for 9.58 miles to the community of Clarksburg and the intersection of Sacramento River.</P>
                <P>(4) Then southeasterly along the course of the Sacramento River for 7.8 miles to the beginning point.</P>
                <CITA>[T.D. ATF-134, 48 FR 22146, May 17, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.69</SECTNO>
                <SUBJECT>Yakima Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Yakima Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Yakima Valley viticultural area are two U.S.G.S. maps. They are entitled:</P>
                <P>(1) “Walla Walla, Washington,” scaled 1:250,000, edition of 1953, limited revision 1963; and</P>

                <P>(2) “Yakima, Washington,” scaled 1:250,000, edition of 1958, revised 1971.<PRTPAGE P="153"/>
                </P>
                <P>(c) <E T="03">Boundaries.</E> The Yakima Valley viticultural area is located in Benton and Yakima Counties, Washington. The beginning point is found on the “Yakima, Washington,” U.S.G.S. map at the Wapato Dam located on the Yakima River.</P>
                <P>(1) Then east following the crest of the Rattlesnake Hills across Elephant Mountain, Zillah Peak, High Top (elevation 3031 feet), and an unnamed mountain (elevation 3629 feet) to the Bennett Ranch;</P>
                <P>(2) Then due east approximately 0.2 mile to the boundary of the Hanford Atomic Energy Commission Works;</P>
                <P>(3) Then southeast following the boundary of the Hanford AEC Works along the Rattlesnake Hills to the Yakima River;</P>
                <P>(4) Then southeast across the top of Red Mountain to the peak of Badger Mountain;</P>
                <P>(5) Then due south for approximately 4.9 miles to the 1000 foot contour line immediately south of the Burlington Northern Railroad (indicated on map as the Northern Pacific Railroad);</P>
                <P>(6) Then west following the 1000 foot contour line to its intersection with U.S. Highway 97 immediately west of Hembre Mountain;</P>
                <P>(7) Then west following the Toppenish Ridge, across an unnamed mountain (elevation 2172 feet), an unnamed mountain (elevation 2363 feet), to the peak of Toppenish Mountain (elevation 3609 feet);</P>
                <P>(8) Then northwest in straight line for approximately 9.3 miles to the lookout tower at Fort Simcoe Historical State Park;</P>
                <P>(9) Then north in a straight line for approximately 11.7 miles to an unnamed peak, (elevation 3372 feet); and</P>
                <P>(10) Then east following Ahtanum Ridge, crossing unnamed peaks of 2037 feet elevation, 2511 feet elevation, 2141 feet elevation, to the Wapato Dam at the point of beginning.</P>
                <CITA>[T.D. ATF-128, 48 FR 14375, Apr. 4, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.70</SECTNO>
                <SUBJECT>Northern Sonoma.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Northern Sonoma.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Northern Sonoma viticultural area are the U.S.G.S. Topographical Map of Sonoma County, California, scale 1:100,000, dated 1970, the Asti Quadrangle, California, 7.5 minute series (Topographic) Map, dated 1959, photorevised 1978, and the Jimtown Quadrangle, California-Sonoma County, 7.5 Minute series (Topographic) Map, dated 1955, photorevised 1975.</P>
                <P>(c) <E T="03">Boundary.</E> The Northern Sonoma Viticultural area is located in Sonoma County, California. The boundary description in paragraphs (c)(1) through (c)(28) of this section includes (in parentheses) the local names of roads which are not identified by name on the map.</P>
                <P>(1) On the U.S.G.S. Topographical Map of Sonoma County, California, the beginning point is the point, in the town of Monte Rio, at which a secondary highway (Bohemian Highway) crosses the Russian River.</P>
                <P>(2) The boundary follows this secondary highway (Bohemian Highway) southeasterly across the Russian River, along Dutch Bill Creek, through the towns of Camp Meeker, Occidental, and Freestone, then northeasterly to the point at which it is joined by State Highway 12.</P>
                <P>(3) The boundary follows State Highway 12 through the town of Sebastopol to the point, near a bench mark at elevation 96 feet, at which it intersects a northbound secondary highway (Fulton Road) leading toward the town of Fulton.</P>
                <P>(4) The boundary follows this secondary highway (Fulton Road) north to the town of Fulton where it intersects an east-west secondary highway (River Road).</P>
                <P>(5) The boundary follows this secondary highway (River Road)—</P>
                <P>(i) East past U.S. Highway 101 (where the name of this secondary highway changes to Mark West Springs Road),</P>
                <P>(ii) Easterly, then northerly to the town of Mark West Springs (where the name of this secondary highway changes to Porter Road),</P>
                <P>(iii) Easterly to the town of Petrified Forest (where the name of this secondary highway changes to Petrified Forest Road), and</P>

                <P>(iv) Northeasterly to the Sonoma County-Napa County line.<PRTPAGE P="154"/>
                </P>
                <P>(6) The boundary follows the Sonoma County-Napa County line northerly to the Sonoma County-Lake County line.</P>
                <P>(7) The boundary follows the Sonoma County-Lake County line northwesterly to the section line on the north side of Section 11, Township 10 North, Range 8 West.</P>
                <P>(8) The boundary follows this section line west to the northwest corner of Section 9, Township 10 North, Range 8, West.</P>
                <P>(9) The boundary follows the section line south to the southwest corner of Section 4, Township 9 North, Range 8, West.</P>
                <P>(10) The boundary proceeds northerly along the western lines of section 4, of Township 9 North, Range 8 West, and sections 33, 28, 21, 16, and 9 of Township 10 North, Range 8 West of the Jimtown Quadrangle map.</P>
                <P>(11) The boundary proceeds westerly along the northern lines of sections 8 and 7, Township 10 North, Range 8 West and section 12, Township 10 North, Range 9 West to the southeastern corner of section 2, Township 10 North, Range 9 West.</P>
                <P>(12) The boundary proceeds northwesterly in a straight line to the eastern line of section 3 at 38 degrees 45 minutes latitude, Township 10 North, Range 9 West.</P>
                <P>(13) The boundary proceeds westerly along latitude line 38 degrees 45 minutes to the point lying at 122 degrees 52 minutes 30 seconds longitude.</P>
                <P>(14) The boundary proceeds northwesterly in a straight line to the southeast corner of section 4, Township 11 North, Range 10 West, on the Asti, Quadrangle map.</P>
                <P>(15) The boundary proceeds northeasterly in a straight line to the southeast corner of section 34, Township 12 North, Range 10 West.</P>
                <P>(16) The boundary proceeds north along the east boundary of section 34, Township 12 North, Range 10 West on the U.S.G.S. Topographical Map of Sonoma County, California, to the Sonoma County-Mendocino County line.</P>
                <P>(17) The boundary proceeds along the Sonoma County-Mendocino County line west then south to the southwest corner of section 34, Township 12 North, Range 11 West.</P>
                <P>(18) The boundary proceeds in a straight line east southeasterly to the southeast corner of section 2, Township 11 North, Range 11 West.</P>
                <P>(19) The boundary proceeds in a straight line south southeasterly to the southeast corner of section 24, Township 11 North, Range 11 West.</P>
                <P>(20) The boundary proceeds in a straight line southeasterly across sections 30, 31, and 32 in Township 11 North, Range 10 West, to the point at 38 degrees 45 minutes North latitude parallel and 123 degrees 00 minutes East longitude in section 5, Township 10 North, Range 10 West.</P>
                <P>(21) The boundary proceeds along this latitude parallel west to the west line of section 5, Township 10 North, Range 11 West.</P>
                <P>(22) The boundary proceeds along the section line south to the southeast corner of section 18, Township 9 North, Range 11 West.</P>
                <P>(23) The boundary proceeds in a straight line southwesterly approximately 5 miles to the peak of Big Oat Mountain, elevation 1,404 feet.</P>
                <P>(24) The boundary proceeds in a straight line southerly approximately 2<FR>3/4</FR> miles to the peak of Pole Mountain, elevation 2,204 feet.</P>
                <P>(25) The boundary proceeds in a straight line southeasterly approximately 4<FR>3/4</FR> miles to the confluence of Austin Creek and the Russian River.</P>
                <P>(26) The boundary proceeds along the Russian River northeasterly, then southeasterly to the beginning point.</P>
                <CITA>[T.D. ATF-204, 50 FR 20562, May 17, 1985, as amended by T.D. ATF-233; 51 FR 30354, Aug. 26, 1986; T.D. ATF-300, 55 FR 32402, Aug. 9, 1990]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.71</SECTNO>
                <SUBJECT>Hermann.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Hermann.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Hermann viticultural area are six U.S.G.S. Missouri Quadrangle maps, 7.5 minute series. They are entitled:</P>
                <P>(1) Hermann (1974).</P>
                <P>(2) Berger (1974).</P>
                <P>(3) Gasconade (1974).</P>
                <P>(4) Pershing (1974).</P>
                <P>(5) Swiss (1973).</P>
                <P>(6) Dissen (1973).<PRTPAGE P="155"/>
                </P>
                <P>(c) <E T="03">Boundaries.</E> The Hermann viticultural area is located in central Missouri along and south of the Missouri River, in the northern portions of Gasconade and Franklin Counties. The boundaries of the Hermann viticultural area, using landmarks and points of reference found on the appropriate U.S.G.S. maps, are as follows:</P>
                <P>(1) Starting at the intersection of the Gasconade River with the Missouri River.</P>
                <P>(2) Then continuing east and northeast approximately 16.5 miles along the Missouri River Pacific Railroad, as it parallels the Missouri River, to the Gasconade/Franklin County line.</P>
                <P>(3) Then continuing along the Missouri Pacific Railroad southeast approximately 8.5 miles to the intersection Big Berger Creek.</P>
                <P>(4) Then southwest along the winding course of Big Berger Creek for approximately 20 miles (eight miles due southwest) to Township line T.44/45N.</P>
                <P>(5) Then west along the T.44/45N. line approximately 15.5 miles to the intersection of First Creek.</P>
                <P>(6) Then north and northwest along the course of First Creek approximately 13.7 miles (6.5 miles straight northwest) to the intersection of the Gasconade River.</P>
                <P>(7) Then northeast along the course of the Gasconade River approximately 3.8 miles to the beginning point.</P>
                <CITA>[T.D. ATF-136, 48 FR 37372, Aug. 18, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.72</SECTNO>
                <SUBJECT>Southeastern New England.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Southeastern New England.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Southeastern New England viticultural area are three U.S.G.S. maps. They are entitled:</P>
                <P>(1) “Boston, Mass.; N.H.; Conn.; R.I.; Maine”, scaled 1:250,000, edition of 1956, revised 1970;</P>
                <P>(2) “Hartford, Conn.; N.Y.; N.J.; Mass.”, scaled 1:250,000, edition of 1962, revised 1975; and</P>
                <P>(3) “Providence, R.I.; Mass.; Conn.; N.Y.”, scaled 1:250,000, edition of 1947, revised 1969.</P>
                <P>(c) <E T="03">Boundaries.</E> The Southeastern New England viticultural area is located in the counties of New Haven, New London, and Middlesex in Connecticut; in the counties of Bristol, Newport, Providence, and Washington, in Rhode Island; and in the counties of Barnstable, Bristol, Dukes, Nantucket, Norfolk, and Plymouth in Massachusetts. The beginning point is found on the “Hartford” U.S.G.S. map in New Haven Harbor;</P>
                <P>(1) Then north following the Quinnipiac River to U.S. Interstate 91;</P>
                <P>(2) Then east following U.S. Interstate 91 to Connecticut Highway 80;</P>
                <P>(3) Then east following Connecticut Highway 80 to Connecticut Highway 9 near Deep River;</P>
                <P>(4) Then north following Connecticut Highway 9 to Connecticut Highway 82;</P>
                <P>(5) Then north, east, south and east following Connecticut Highway 82 and 182 to Connecticut Highway 2 in Norwich;</P>
                <P>(6) Then east following Connecticut Highway 2 to Connecticut Highway 165;</P>
                <P>(7) Then east following Connecticut and Rhode Island Highway 165 to Interstate Highway 95 near Millville;</P>
                <P>(8) Then north following Interstate Highway 95 to the Kent County-Washington County boundary;</P>
                <P>(9) Then east following the Kent County-Washington County boundary into Narragansett Bay;</P>
                <P>(10) Then north through Narragansett Bay, the Providence River, and the Blackstone River to the Rhode Island-Massachusetts State boundary;</P>
                <P>(11) Then east and south following the Rhode Island-Massachusetts State boundary to the Norfolk-Bristol (Mass.) County boundary;</P>
                <P>(12) Then northeast following the Norfolk-Bristol (Mass.) County boundary to the Amtrak right-of-way (Penn Central on map) northeast of Mansfield;</P>
                <P>(13) Then north following the Amtrak right-of-way to the Neponset River immediately east of the Norwood Memorial Airport;</P>
                <P>(14) Then northeast following the Neponset River into Dorchester Bay;</P>

                <P>(15) Then east following the Norfolk-Suffolk County boundary, and the Plymouth-Suffolk County boundary into Massachusetts Bay;<PRTPAGE P="156"/>
                </P>
                <P>(16) Then returning to the point of beginning by way of Massachusetts Bay, the Atlantic Ocean, Block Island Sound and Long Island Sound; and including all of the offshore islands in Norfolk, Plymouth, Barnstable, Nantucket, Dukes, and Bristol Counties, Massachusetts; all offshore islands in Rhode Island; and all offshore islands in Connecticut east of the Quinnipiac River.</P>
                <CITA>[T.D. ATF-169, 49 FR 11830, Mar. 28, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.73</SECTNO>
                <SUBJECT>Martha's Vineyard.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Martha's Vineyard.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved map for determining the boundary of the Martha's Vineyard viticultural area is the U.S.G.S. map, “Providence, R.I.; Mass.; Conn.; N.Y.;” scaled 1:250,000, edition of 1947 revised 1969.</P>
                <P>(c) <E T="03">Boundaries.</E> The Martha's Vineyard viticultural area is located entirely within Dukes County, Massachusetts. The boundary of the Martha's Vineyard viticultural area is the shoreline of the islands named “Martha's Vineyard” and “Chappaquiddic Island” on the “Providence” U.S.G.S. map, and the viticultural area comprises the entire area of the islands.</P>
                <CITA>[T.D. ATF-193, 50 FR 256, Jan 3, 1985]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.74</SECTNO>
                <SUBJECT>Columbia Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Columbia Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Columbia Valley viticultural area are nine 1:250,000 scale U.S.G.S. maps. They are entitled:</P>
                <P>(1) “Concrete, Washington, U.S.; British Columbia, Canada,” edition of 1955, limited revision 1962;</P>
                <P>(2) “Okanogan, Washington,” edition of 1954, limited revision 1963;</P>
                <P>(3) “Pendleton, Oregon, Washington,” edition of 1953, revised 1973;</P>
                <P>(4) “Pullman, Washington, Idaho,” edition of 1955, revised 1974;</P>
                <P>(5) “Ritzville, Washington,” edition of 1953, limited revision 1965;</P>
                <P>(6) “The Dalles, Oregon, Washington,” edition of 1953, revised 1971;</P>
                <P>(7) “Walla Walla, Washington, Oregon,” edition of 1953, limited revision 1963;</P>
                <P>(8) “Wenatchee, Washington,” edition of 1957, revised 1971; and</P>
                <P>(9) “Yakima, Washington,” edition of 1958, revised 1971.</P>
                <P>(c) <E T="03">Boundaries.</E> The Columbia Valley viticultural area is located in Adams, Benton, Chelan, Columbia, Douglas, Ferry, Franklin, Garfield, Grant, Kittitas, Klickitat, Lincoln, Okanogan, Stevens, Walla Walla, Whitman, and Yakima Counties, Washington, and in Gilliman, Morrow, Sherman, Umatilla, and Wasco Counties, Oregon. The beginning point is found on “The Dalles” U.S.G.S. map at the confluence of the Klickitat and Columbia Rivers:</P>
                <P>(1) Then north and east following the Klickitat and Little Klickitat Rivers to U.S. Highway 97 northeast of Goldendale;</P>
                <P>(2) Then north following U.S. Highway 97 to the 1,000′ contour line southwest of Hembre Mountain;</P>
                <P>(3) Then west following the Toppenish Ridge, across unnamed mountains of 2,172′ and 2,363′ elevation, to the peak of Toppenish Mountain, elevation 3,609′;</P>
                <P>(4) Then northwest in a straight line for approximately 11.3 miles to the intersection of Agency Creek with the township line between R. 15 E. and R. 16 E.;</P>
                <P>(5) Then north following the township line between R. 15 E. and R. 16 E. to the Tieton River;</P>
                <P>(6) Then northeast following the Tieton River to the confluence with the Naches River;</P>
                <P>(7) Then east in a straight line for approximately 15.3 miles to the intersection of the 46°45′ latitude line with the Yakima River;</P>
                <P>(8) Then north following the Yakima River to the confluence with the North Branch Canal approximately one mile northwest of Throp;</P>
                <P>(9) Then north, east, and southeast following the North Branch Canal to its intersection with U.S. Interstate 90 in Johnson Canyon;</P>
                <P>(10) Then east following U.S. Interstate 90 to the Columbia River;</P>

                <P>(11) Then north following the Columbia River to the township line between <PRTPAGE P="157"/>T. 21 N. and T. 22 N. immediately north of the Rock Island Dam;</P>
                <P>(12) Then west following the township line between T. 21 N. and T. 22 N. for approximately 7.1 miles (from the west shore of the Columbia River) to the 2,000′ contour line immediately west of Squilchuck Creek;</P>
                <P>(13) Then north and west following the 2,000′ contour line to the township line between R. 18 E. and R. 19 E. west of the landing area at Cashmere-Dryden;</P>
                <P>(14) Then north following the township line between R. 18 E. and R. 19 E. for approximately 4.4 miles to the 2,000′ contour line in Ollala Canyon;</P>
                <P>(15) Then east, north, and northwest following the 2,000′ contour line to the township line between R. 19 E. and R. 20 E. immediately west of Ardenoir;</P>
                <P>(16) Then north following the township line between R. 19 E. and R. 20 E for approximately 2.8 miles to the 2,000′ contour line immediately north of the secondary road;</P>
                <P>(17) Then southwest and north following the 2,000′ contour line to the township line between T. 28 N. and T. 29 N.;</P>
                <P>(18) Then east following the township line between T. 28 N. and T. 29 N. for approximately 2.1 miles to the 2,000′ contour line immediately east of Lake Chelan;</P>
                <P>(19) Then southeast and north following the 2,000′ contour line (beginning in the “Wenatchee” U.S.G.S. map, passing through the “Ritzville” and “Okanogan” maps, and ending in the “Concrete” map) to the point where the 2,000′ contour line intersects the township line between T. 30 N. and T. 31 N. immediately west of Methow;</P>
                <P>(20) Then east following the township line between T. 30 N. and T. 31 N. for approximately 20.2 miles to the 2,000′ contour line east of Monse;</P>
                <P>(21) Then south and east following the 2,000′ contour line to the township line between T. 30 N. and T. 31 N. west of Alkali Lake;</P>
                <P>(22) Then northeast in a straight line for approximately 10.7 miles to the point of intersection of the 2,000′ contour line with Coyote Creek;</P>
                <P>(23) Then east, north, south, east, and north following the 2,000′ contour line to the township line between T. 29 N. and T. 30 N. immediately west of the Sanpoil River;</P>
                <P>(24) Then east following the township line between T. 29 N. and T. 30 N. for approximately 2.3 miles to the 2,000′ contour line immediately east of the Sanpoil River;</P>
                <P>(25) Then south, east, and north following the 2,000′ contour line to the township line between T. 29 N. and T 30 N. at Ninemile Flat;</P>
                <P>(26) Then east following the township line between T. 29 N. and T. 30 N. for approximately 10.7 miles to the township line between R. 36 E. and R. 37 E.;</P>
                <P>(27) Then south following the township line between R. 36 N. and R. 37 E. to the township line between T. 26 N. and T. 27 N.;</P>
                <P>(28) Then west following the township line between T. 26 N. and T. 27 N. to Banks Lake;</P>
                <P>(29) Then south following Banks Lake to Dry Falls Dam;</P>
                <P>(30) Then west and south following U.S. Highway 2 and Washington Highway 17 to the intersection with Washington Highway 28 in Soap Lake;</P>
                <P>(31) Then southeast in a straight line for approximately 4.7 miles to the source of Rocky Ford Creek near a fish hatchery;</P>
                <P>(32) Then south following Rocky Ford Creek and Moses Lake to U.S. Interstate 90 southwest of the town of Moses Lake;</P>
                <P>(33) Then east following U.S. Interstate 90 to the Burlington Northern (Northern Pacific) Railroad right-of-way at Raugust Station;</P>
                <P>(34) Then south following the Burlington Northern (Northern Pacific) Railroad right-of-way to Washington Highway 260 in Connell;</P>
                <P>(35) Then east following Washington Highway 260 through Kahlotus to the intersection with Washington Highway 26 in Washtucna;</P>
                <P>(36) Then east following Washington Highways 26 and 127 through La Crosse and Dusty to the intersection with U.S. Highway 195 at Colfax;</P>
                <P>(37) Then south following U.S. Highway 195 to the Washington-Idaho State boundary;</P>

                <P>(38) Then south following the Washington-Idaho State boundary to the Snake River and continuing along the <PRTPAGE P="158"/>Snake River to the confluence with Asotin Creek;</P>
                <P>(39) Then west following Asotin Creek and Charley Creek to the township line between R. 42 E. and R. 43 E.;</P>
                <P>(40) Then north following the township line between R. 42 E. and R. 43 E. to Washington Highway 128 in Peola;</P>
                <P>(41) Then north following Washington Highway 128 to the intersection with U.S. Highway 12 in Pomeroy;</P>
                <P>(42) Then west following U.S. Highway 12 for approximately 5 miles to the intersection with Washington Highway 126 [in Zumwalt];</P>
                <P>(43) Then southwest following Washington Highway 126 and U.S. Highway 12 through Marengo, Dayton, and Waitsburg to a point where an unnamed light-duty road leaves Highway 12 in an easterly direction in Minnick Station, Washington;</P>
                <P>(44) Then east following the unnamed light-duty road for approximately 250 feet until it reaches the 2000′ contour line;</P>
                <P>(45) Then south and southwest following the 2000′ contour line to the place where it crosses Oregon Highway 74 in Windmill, Oregon;</P>
                <P>(46) Then west following Oregon Highway 74 to Highway 207 in Heppner;</P>
                <P>(47) Then southwest following Oregon Highway 207 to Highway 206 in Ruggs;</P>
                <P>(48) Then northwest following Oregon Highway 206 to the intersection with the township line between T. 1 S. and T. 2 S.;</P>
                <P>(49) Then west following the township line between T. 1 S. and T. 2 S. to the Deschutes River;</P>
                <P>(50) Then north following the Deschutes River to the Willamette Base Line;</P>
                <P>(51) Then west following the Willamette Base Line to the township line between R. 12 E. and R. 13 E.;</P>
                <P>(52) Then north following the township line between R. 12 E. and R. 13. to the Columbia River;</P>
                <P>(53) Then west following the Columbia River to the confluence with the Klickitat River and the point of beginning.</P>
                <CITA>[T.D. ATF-190, 49 FR 44897, Nov. 13, 1984, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987; 52 FR 10224, Mar. 31, 1987; T.D. ATF-344, 58 FR 40354, July 28, 1993; T.D. ATF-441, 66 FR 11542, Feb. 26, 2001]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.75</SECTNO>
                <SUBJECT>Central Coast.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Central Coast.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Central Coast viticultural area are the following 43 United States Geological Survey topographic maps:</P>
                <P>(1) Monterey, California (formerly, the Santa Cruz map), scale 1:250,000, NJ 10-12, dated 1974;</P>
                <P>(2) Watsonville East, Calif. Quadrangle, Scale 1:24,000, dated 1955, photorevised 1968;</P>
                <P>(3) Mt. Madonna, Calif. Quadrangle, Scale 1:24,000, dated 1955, photorevised 1980;</P>
                <P>(4) Loma Prieta, Calif. Quadrangle, Scale 1:24,000, dated 1955, photorevised 1968;</P>
                <P>(5) Morgan Hill, Calif. Quadrangle, Scale 1:24,000, dated 1955, photorevised 1980;</P>
                <P>(6) Santa Teresa Hills, Calif. Quadrangle, Scale 1:24,000, dated 1953, photorevised 1968;</P>
                <P>(7) Los Gatos, Calif. Quadrangle, Scale 1:24,000, dated 1953, photorevised 1980;</P>
                <P>(8) Castle Rock Ridge, Calif. Quadrangle, Scale 1:24,000, dated 1955, photorevised 1968, photoinspected 1973;</P>
                <P>(9) San Jose, California, scale 1:250,000, NJ 10-9, dated 1962, revised 1969;</P>
                <P>(10) Dublin, Calif. Quadrangle, scale 1:24,000, dated 1961, photorevised 1980;</P>
                <P>(11) Livermore, Calif. Quadrangle, scale 1:24,000, dated 1961, photorevised 1968 and 1973;</P>
                <P>(12) Tassajara, Calif. Quadrangle, scale 1:24,000, dated 1953, photoinspected 1974;</P>
                <P>(13) Byron Hot Springs, Calif. Quadrangle, scale 1:24,000, dated 1953, photorevised 1968;</P>
                <P>(14) Altamont, Calif. Quadrangle, scale 1:24,000, dated 1953, photorevised 1968;</P>
                <P>(15) Mendenhall Springs, Calif. Quadrangle, scale 1:24,000, dated 1956, photorevised 1971;</P>
                <P>(16) San Luis Obispo, California, scale 1:250,000, NI 10-3, dated 1956, revised 1969 and 1979;</P>

                <P>(17) Santa Maria, California, scale 1:250,000, NI 10-6, 9, dated 1956, revised 1969;<PRTPAGE P="159"/>
                </P>
                <P>(18) Los Angeles, California, scale 1:250,000, NI 11-4, dated 1974;</P>
                <P>(19) Diablo, California, scale 1:24,000, dated 1953, Photorevised 1980;</P>
                <P>(20) Clayton, California, scale 1:24,000, dated 1953, Photorevised 1980;</P>
                <P>(21) Honker Bay, California, scale 1:24,000, dated 1953, Photorevised 1980;</P>
                <P>(22) Vine Hill, California, scale 1:24,000, dated 1959, Photorevised 1980;</P>
                <P>(23) Benicia, California, scale 1:24,000, dated 1959, Photorevised 1980;</P>
                <P>(24) Mare Island, California, scale 1:24,000, dated 1959, Photorevised 1980;</P>
                <P>(25) Richmond, California, scale 1:24,000, dated 1959, Photorevised 1980;</P>
                <P>(26) San Quentin, California, scale 1:24,000, dated 1959, Photorevised 1980;</P>
                <P>(27) Oakland West, California, scale 1:24,000, dated 1959, Photorevised 1980;</P>
                <P>(28) San Francisco North, California, scale 1:24,000, dated 1956, Photorevised 1968 and 1973;</P>
                <P>(29) San Francisco South, California, scale 1:24,000, dated 1956, Photorevised 1980;</P>
                <P>(30) Montara Mountain, California, scale 1:24,000, dated 1956, Photorevised 1980;</P>
                <P>(31) Half Moon Bay, California, scale 1:24,000, dated 1961, Photoinspected 1978, Photorevised 1968 and 1973;</P>
                <P>(32) San Gregorio, California, scale 1:24,000, dated 1961, Photoinspected 1978, Photorevised 1968;</P>
                <P>(33) Pigeon Point, California, scale 1:24,000, dated 1955, Photorevised 1968;</P>
                <P>(34) Franklin Point, California, scale 1:24,000, dated 1955, Photorevised 1968;</P>
                <P>(35) Año Nuevo, California, scale 1:24,000, dated 1955, Photorevised 1968;</P>
                <P>(36) Davenport, California, scale 1:24,000, dated 1955, Photorevised 1968;</P>
                <P>(37) Santa Cruz, California, scale 1:24,000, dated 1954, Photorevised 1981;</P>
                <P>(38) Felton, California, scale 1:24,000, dated 1955, Photorevised 1980;</P>
                <P>(39) Laurel, California, scale 1:24,000, dated 1955, Photoinspected 1978, Photorevised 1968;</P>
                <P>(40) Soquel, California, scale 1:24,000, dated 1954, Photorevised 1980;</P>
                <P>(41) Watsonville West, California, scale 1:24,000, dated 1954, Photorevised 1980;</P>
                <P>(42) Midway, California, scale 1:24,000, dated 1953, Photorevised 1980; and</P>
                <P>(43) Cedar Mtn., California, scale 1:24,000, dated 1956, Photorevised 1971; minor revision 1994.</P>
                <P>(c) <E T="03">Boundary.</E> The Central Coast viticultural area is located in the following California counties: Monterey, Santa Cruz, Santa Clara, Alameda, San Benito, San Luis Obispo, Santa Barbara, San Francisco, San Mateo, and Contra Costa. The Santa Cruz Mountains viticultural area is excluded. (The boundaries of the Santa Cruz Mountains viticultural area are described in 27 CFR § 9.31.)</P>
                <P>(1) The beginning point is the point at which the Pajaro River flows into Monterey Bay. (Monterey map)</P>
                <P>(2) The boundary follows north along the shoreline of the Pacific Ocean (across the Watsonville West, Soquel, Santa Cruz, Davenport, Año Nuevo, Franklin Point, Pigeon Point, San Gregorio, Half Moon Bay, Montara Mountain and San Francisco South maps) to the San Francisco/Oakland Bay Bridge. (San Francisco North Quadrangle)</P>
                <P>(3) From this point, the boundary proceeds east on the San Francisco/Oakland Bay Bridge to the Alameda County shoreline. (Oakland West Quadrangle)</P>
                <P>(4) From this point, the boundary proceeds east along the shoreline of Alameda County and Contra Costa County across the Richmond, San Quentin, Mare Island, and Benicia maps to a point marked BM 15 on the shoreline of Contra Costa County. (Vine Hill Quadrangle)</P>
                <P>(5) From this point, the boundary proceeds in a southeasterly direction in a straight line across the Honker Bay map to Mulligan Hill elevation 1,438. (Clayton Quadrangle)</P>
                <P>(6) The boundary proceeds in southeasterly direction in a straight line to Mt. Diablo elevation 3,849. (Clayton Quadrangle)</P>
                <P>(7) The boundary proceeds in a southeasterly direction in a straight line across the Diablo and Tassajara maps to Brushy Peak elevation 1,702. (Byron Hot Springs Quadrangle)</P>

                <P>(8) The boundary proceeds due south, approximately 400 feet, to the northern boundaries of Section 13, Township 2 South, Range 2 East. (Byron Hot Springs Quadrangle)<PRTPAGE P="160"/>
                </P>
                <P>(9) The boundary proceeds due east along the northern boundaries of Section 13 and Section 18, Township 2 South, Range 3 East, to the northeast corner of Section 18. (Byron Hot Springs Quadrangle)</P>
                <P>(10) Then proceed southeast in a straight line approximately 1.8 miles to BM 720 in Section 21, Township 2 South, Range 3 East. (Altamont Quadrangle)</P>
                <P>(11) Then proceed south-southeast approximately 1 mile to an unnamed 1,147-foot peak in Section 28, Township 2 South, Range 3 East. (Altamont Quadrangle)</P>
                <P>(12) Then proceed south-southwest in a straight line approximately 1.1 miles to the intersection of the eastern boundary of Section 32 with Highway 580, Township 2 South, Range 3 East. (Altamont Quadrangle)</P>
                <P>(13) Then proceed south-southeast in a straight line approximately 2.7 miles to BM 1602 in Patterson Pass in Section 10, Township 3 South, Range 3 East. (Altamont Quadrangle)</P>
                <P>(14) Then proceed south-southeast in a straight line approximately 2.8 miles to BM 1600, adjacent to Tesla Road in Section 26. (Midway Quadrangle)</P>
                <P>(15) Then proceed south in a straight line approximately 4.2 miles to BM 1878, 40 feet north of Mines Road, in Section 14, Township 4 South, Range 3 East. (Cedar Mtn. Quadrangle)</P>
                <P>(16) Then proceed west-southwest in a straight line approximately 4.2 miles to the southeast corner of Section 19, Township 4 South, Range 3 East. (Mendenhall Springs Quadrangle)</P>
                <P>(17) The boundary follows the east-west section line west along the southern boundary of Section 19 in Township 4 South, Range 3 east, and west along the southern boundary of Section 24 in Township 4 South, Range 2 east, to the southwest corner of that Section 24. (Mendenhall Springs Quadrangle)</P>
                <P>(18) The boundary follows the north-south section line north along the western boundary of Section 24 in Township 4 South, Range 2 east, to the northwest corner of that Section 24. (Mendenhall Springs Quadrangle)</P>
                <P>(19) The boundary follows the east-west section line west along the southern boundary of Section 14 in Township 4 South, Range 2 east, to the southwest corner of that Section 14. (Mendenhall Springs Quadrangel)</P>
                <P>(20) The boundary follows the north-south section line north along the western boundary of Section 14 in Township 4 South, Range 2 east, to the Hetch Hetchy Aqueduct. (Mendenhall Springs Quadrangle)</P>
                <P>(21) The boundary follows the Hetch Hetchy Aqueduct southwesterly to the range line dividing Range 1 East from Range 2 East. (San Jose map)</P>
                <P>(22) The boundary follows this range line south to its intersection with State Route 130. (San Jose map)</P>
                <P>(23) The boundary follows State Route 130 southeasterly to its intersection with the township line dividing Township 6 South from Township 7 South. (San Jose map)</P>
                <P>(24) From this point, the boundary proceeds in a straight line southeasterly to the intersection of the township line dividing Township 7 South from Township 8 South with the range line dividing Range 2 East from Range 3 East. (San Jose map)</P>
                <P>(25) From this point, the boundary proceeds in a straight line southeasterly to the intersection of the township line dividing Township 8 South from Township 9 South with the range line dividing Range 3 East from Range 4 East. (San Jose map)</P>
                <P>(26) From this point, the boundary proceeds in a straight line southeasterly to the intersection of Coyote Creek with the township line dividing Township 9 South from Township 10 South. (San Jose map)</P>
                <P>(27) From this point, the boundary proceeds in a straight line southeasterly to the intersection of the 37°00′ North latitude parallel with State Route 152. (San Jose map)</P>
                <P>(28) The boundary follows the 37°00′ North latitude parallel east to the range line dividing Range 5 East from Range 6 East. (Monterey map)</P>
                <P>(29) The boundary follows this range line south to the San Benito-Santa Clara County line. (Monterey map)</P>
                <P>(30) The boundary follows the San Benito-Santa Clara County line easterly to the San Benito-Merced County line. (Monterey map)</P>

                <P>(31) The boundary follows the San Benito-Merced County line southeasterly to the conjunction of the county lines <PRTPAGE P="161"/>of San Benito, Merced, and Fresno Counties. (Monterey map)</P>
                <P>(32) From this point, the boundary proceeds in a southwesterly extension of the Merced-Fresno County line to Salt Creek. (Monterey map)</P>
                <P>(33) From this point, the boundary proceeds in a straight line southeasterly to the conjunction of the county lines of Monterey, San Benito, and Fresno Counties. (Monterey map)</P>
                <P>(34) The boundary follows the Monterey-Fresno County line southeasterly to the Monterey-Kings County line. (Monterey and San Luis Obispo maps)</P>
                <P>(35) The boundary follows the Monterey-Kings County line southeasterly to the San Luis Obispo-Kings County line. (San Luis Obispo map)</P>
                <P>(36) The boundary follows the San Luis Obispo-Kings County line east to the San Luis Obispo-Kern County line. (San Luis Obispo map)</P>
                <P>(37) The boundary follows the San Luis Obispo-Kern County line south, then east, then south to the point at which the county line diverges easterly from the range line dividing Range 17 East from Range 18 East. (San Luis Obispo map)</P>
                <P>(38) The boundary follows this range line south to the township line dividing Township 28 South from Township 29 South. (San Luis Obispo map)</P>
                <P>(39) The boundary follows the township line west to the range line dividing Range 13 East from Range 14 East. (San Luis Obispo map)</P>
                <P>(40) The boundary follows this range line south to the boundary of the Los Padres National Forest. (San Luis Obispo map)</P>
                <P>(41) The boundary follows the boundary of the Los Padres National Forest southeasterly to the creek of Toro Canyon. (San Luis Obispo, Santa Maria, and Los Angeles maps)</P>
                <P>(42) The boundary follows the creek of Toro Canyon southerly to the Pacific Ocean. (Los Angeles map)</P>
                <P>(43) The boundary follows the shoreline of the Pacific Ocean and Monterey Bay northerly to the beginning point. (Los Angeles, Santa Maria, San Luis Obispo, and Monterey maps)</P>
                <CITA>[T.D. ATF-216, 50 FR 43130, Oct. 24, 1985, as amended by T.D. ATF-407, 64 FR 3023, Jan. 20, 1999; T.D. TTB-48, 71 FR 34524, June 15, 2006]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.76</SECTNO>
                <SUBJECT>Knights Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Knights Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Knights Valley viticultural area are four U.S.G.S. maps. They are—</P>
                <P>(1) “Mount St. Helena Quadrangle, California,” 7.5 minute series, 1959 (Photoinspected 1973);</P>
                <P>(2) “Jimtown Quadrangle, California,” 7.5 minute series, 1955 (Photorevised 1975);</P>
                <P>(3) “Mark West Springs Quadrangle, California,” 7.5 minute series, 1958; and</P>
                <P>(4) “Detert Reservoir Quadrangle, California,” 7.5 minute series, 1958 (Photorevised 1980).</P>
                <P>(c) <E T="03">Boundary.</E> The Knights Valley viticultural area is located in northeastern Sonoma County, California. From the beginning point lying at the intersection of the Sonoma/Lake County line and the north line of Section 11, Township 10 North (T. 10 N.), Range 8 West (R. 8 W.) on the “Mount St. Helena Quadrangle” map, the boundary runs—</P>
                <P>(1) Westerly along the north line of Sections 11, 10, and 9, T. 10 N., R. 8 W. to the northwest corner of Section 9 on the “Jimtown Quadrangle” map;</P>
                <P>(2) Then southerly along the west line of Sections 9, 16, 21, 28, and 33, T. 10 N., R. 8 W., continuing along the west line of Section 4, T. 9 N., R. 8 W. to the southwest corner thereof;</P>
                <P>(3) Then easterly along the south line of Section 4 to the southeast corner thereof on the “Mount St. Helena Quadrangle” map;</P>
                <P>(4) Then southerly along the west line of Sections 10, 15, and 22, T. 9 N., R. 8 W. to the point of intersection with Franz Creek in Section 22 on the “Mark West Springs Quadrangle” map;</P>
                <P>(5) Then easterly along Franz Creek approximately 14,000 feet to the centerline of Franz Valley Road;</P>
                <P>(6) Then southerly along the centerline of Franz Valley Road to the point of intersection with the west line of Section 6, T. 8 N., R. 7 W.;</P>

                <P>(7) Then southerly along the west line of Section 6 to the southwest corner thereof;<PRTPAGE P="162"/>
                </P>
                <P>(8) Then easterly along the south line of Sections 6, 5, and 4, T. 8 N., R. 7 W. to the southeast corner of Section 4;</P>
                <P>(9) Then northerly along the east line of Section 4 to the point of intersection with the Sonoma/Napa County line;</P>
                <P>(10) Then northerly along the meanders of the Sonoma/Napa County line on the “Mark West Springs Quadrangle,” “Detert Reservoir Quadrangle,” and “Mount St. Helena Quadrangle” maps to the point of intersection with the Lake County line on the “Mount St. Helena Quadrangle” map;</P>
                <P>(11) Then northerly along the meanders of the Sonoma/Lake County line on the “Mount St. Helena Quadrangle” and “Detert Reservoir Quadrangle” maps to the point of beginning.</P>
                <CITA>[T.D. ATF-158, 48 FR 48816, Oct. 21, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.77</SECTNO>
                <SUBJECT>Altus.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Altus.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Altus viticultural area are five U.S.G.S. maps in the 7.5 minute series. They are titled:</P>
                <P>(1) Ozark Quadrangle, 1966.</P>
                <P>(2) Coal Hill Quadrangle, 1961.</P>
                <P>(3) Hartman Quadrangle, 1961.</P>
                <P>(4) Hunt Quadrangle, 1963.</P>
                <P>(5) Watalula Quadrangle, 1973.</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Altus viticultural area is located in Arkansas. The starting point of the following boundary description is the crossing of the Missouri Pacific Railroad over Gar Creek, near the Arkansas River at the southeast corner of the city of Ozark, Arkansas (on the Ozark Quadrangle map).</P>
                <P>(2) <E T="03">Boundary Description:</E>
                </P>
                <P>(i) From the crossing of the Missouri Pacific Railroad over Gar Creek, following the railroad tracks eastward to the crossing over Horsehead Creek (on the Hartman Quadrangle map).</P>
                <P>(ii) From there northward along Horsehead Creek to the merger with Dirty Creek (on the Coal Hill Quadrangle map).</P>
                <P>(iii) From there generally northwestward along Dirty Creek to Arkansas Highway 352 (where Dirty Creek passes under the highway as a perennial stream—on the Hunt Quadrangle map).</P>
                <P>(iv) From there along Highway 352 westward to Arkansas Highway 219 (on the Watalula Quadrangle map).</P>
                <P>(v) Then southward along Highway 219 to Gar Creek (on the Ozark Quadrangle map).</P>
                <P>(vi) Then southeastward along Gar Creek to the beginning point.</P>
                <CITA>[T.D. ATF-176, 49 FR 22471, May 30, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.78</SECTNO>
                <SUBJECT>Ohio River Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Ohio River Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Ohio River Valley viticultural area are 12 U.S.G.S. topographic maps in the scale 1:250,000, as follows:</P>
                <P>(1) Paducah NJ 16-7 (dated 1949, revised 1969);</P>
                <P>(2) Belleville NJ 16-4 (dated 1958, revised 1977);</P>
                <P>(3) Vincennes NJ 16-5 (dated 1956, revised 1969);</P>
                <P>(4) Louisville NJ 16-6 (dated 1956, revised 1969);</P>
                <P>(5) Cincinnati NJ 16-3 (dated 1953, revised 1974);</P>
                <P>(6) Columbus NJ 17-1 (dated 1967);</P>
                <P>(7) Clarksburg NJ 17-2 (dated 1956, limited revision 1965);</P>
                <P>(8) Canton NJ 17-11 (dated 1957, revised 1969);</P>
                <P>(9) Charleston NJ 17-5 (dated 1957, limited revision 1965);</P>
                <P>(10) Huntington NJ 17-4 (dated 1957, revised 1977);</P>
                <P>(11) Winchester NJ 16-9 (dated 1957, revised 1979); and</P>
                <P>(12) Evansville NJ 16-8 (dated 1957, revised 1974);</P>
                <P>(c) <E T="03">Boundary.</E> The Ohio River Valley viticultural area is located in Indiana, Ohio, West Virginia and Kentucky. The boundary description in paragraphs (c)(1)-(c)(21) of this section includes, for each point, the name of the map sheet (in parentheses) on which the point can be found.</P>
                <P>(1) The beginning point is the point at which the Kentucky, Illinois, and Indiana State lines converge at the confluence of the Wabash River and the Ohio River (Paducah map).</P>

                <P>(2) The boundary follows the Illinois-Indiana State line northerly (across <PRTPAGE P="163"/>the Belleville map) to Interstate Route 64 (Vincennes map).</P>
                <P>(3) From the intersection of Interstate Route 64 and the Wabash River, the boundary proceeds in a straight line northeasterly to the town of Oatsville in Pike County, Indiana (Vincennes map).</P>
                <P>(4) The boundary proceeds in a straight line southeasterly to the point in Spencer County, Indiana, at which State Route 162 diverges northerly from U.S. Route 460, which is knownlocally as State Route 62 (Vincennes map).</P>
                <P>(5) The boundary proceeds in a straight line northeasterly to the point in Harrison County, Indiana, at which State Route 66 diverges northerly from State Route 64 (Vincennes map).</P>
                <P>(6) The boundary proceeds in a straight line northeasterly (across the Louisville map) to the town of New Marion in Ripley County, Indiana (Cincinnati map).</P>
                <P>(7) The boundary proceeds in a straight line northerly to the town of Clarksburg in Decatur County, Indiana (Cincinnati map).</P>
                <P>(8) The boundary proceeds in a straight line easterly to the town of Ridgeville in Warren County, Ohio (Cincinnati map).</P>
                <P>(9) The boundary proceeds in a straight line southeasterly to the town of Chapman in Jackson County, Ohio (Columbus map).</P>
                <P>(10) The boundary proceeds in a straight line northeasterly to the town identified on the map as Hesboro, also known as Ilesboro, in Hocking County, Ohio (Columbus map).</P>
                <P>(11) The boundary proceeds in a straight line northeasterly to the town of Tacoma in Belmont County, Ohio (Clarksburg map).</P>
                <P>(12) The boundary proceeds in a straight line easterly to the town of Valley Grove in Ohio County, West Virginia (Canton map).</P>
                <P>(13) The boundary proceeds in a straight line southerly to the town of Jarvisville in Harrison County, West Virginia (Clarksburg map).</P>
                <P>(14) The boundary proceeds in a straight line southwesterly to the town of Gandeeville in Roane County West Virginia (Charleston map).</P>
                <P>(15) The boundary proceeds in a straight line southwesterly to the town of Atenville in Lincoln County West Virginia (Huntington map).</P>
                <P>(16) The boundary proceeds in a straight line westerly to the town of Isonville in Elliott County, Kentucky (Huntington map).</P>
                <P>(17) The boundary proceeds in a straight line northwesterly to the town of Berlin in Bracken County, Kentucky (Louisville map).</P>
                <P>(18) The boundary proceeds in a straight line westerly to the town of Dry Ridge in Grant County, Kentucky (Louisville map).</P>
                <P>(19) The boundary proceeds in a straight line southwesterly to the town of Crest in Hardin County, Kentucky (Winchester map).</P>
                <P>(20) The boundary proceeds in a straight line westerly to the intersection of State Route 56 and U.S. Route 41 in the city of Sebree in Webster County, Kentucky (Evansville map).</P>
                <P>(21) The boundary proceeds in a straight line northwesterly to the beginning point (Paducah map).</P>
                <CITA>[T.D. ATF-144, 48 FR 40379, Sept. 7, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.79</SECTNO>
                <SUBJECT>Lake Michigan Shore.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Lake Michigan Shore.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Lake Michigan Shore viticultural area are four U.S.G.S. maps, 1:250,000 series. They are entitled: (1) Chicago (1953, revised 1970); (2) Fort Wayne (1953, revised 1969); (3) Racine (1958, revised 1969); and (4) Grand Rapids (1958, revised 1980).</P>
                <P>(c) <E T="03">Boundaries.</E> The Lake Michigan Shore viticultural area is located in the southwestern corner of the State of Michigan. The boundaries of the Lake Michigan Shore viticultural area, using landmarks and points of reference found on the appropriate U.S.G.S maps, are as follows:</P>
                <P>(1) Starting at the most northern point, the intersection the Kalamazoo River with Lake Michigan.</P>

                <P>(2) Then southeast along the winding course of the Kalamazoo River for approximately 35 miles until it intersects <PRTPAGE P="164"/>the Penn Central railroad line just south of the City of Otsego.</P>
                <P>(3) Then south along the Penn Central railroad line, through the City of Kalamazoo, approximately 25 miles until it intersects the Grand Trunk Western railroad line at the community of Schoolcraft.</P>
                <P>(4) Then southwest along the Grand Trunk Western railroad line approximately 35 miles to the Michigan/ Indiana State line.</P>
                <P>(5) Then west along the Michigan-Indiana State line approximately 38 miles until it meets Lake Michigan.</P>
                <P>(6) Then north along the eastern shore of Lake Michigan approximately 72 miles to the beginning point.</P>
                <CITA>[T.D. ATF-153, 48 FR 46526, Oct. 13, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.80</SECTNO>
                <SUBJECT>York Mountain.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “York Mountain.”</P>
                <P>(b) <E T="03">Approved map.</E> The approved map for the York Mountain viticultural area is the U.S.G.S. map entitled “York Mountain Quadrangle,” 7.5 minute series (topographic), 1949 (photorevised 1979).</P>
                <P>(c) <E T="03">Boundaries.</E> The York Mountain viticultural area is located in San Luis Obispo County, California. The boundaries are as follows:</P>
                <P>(1) From the beginning point at the northwest corner of the York Mountain Quadrangle map where the Dover Canyon Jeep Trail and Dover Canyon Road intersect, proceed east along Dover Canyon Road 1.5 miles to the western boundary line of Rancho Paso de Robles;</P>
                <P>(2) Follow the western boundary line of Rancho Paso de Robles southwest 6.0 miles to where the boundary joins Santa Rita Creek;</P>
                <P>(3) Turn right at Santa Rita Creek and follow the creek 5 miles to where the waters of Dover Canyon and Santa Rita Creek meet; and</P>
                <P>(4) Then proceed north along Dover Canyon Creek to its intersection with Dover Canyon Road, then following Dover Canyon Road (which becomes Dover Canyon Jeep Trail) back to the point of beginning.</P>
                <CITA>[T.D. ATF-143, 48 FR 38463, Aug. 24, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.81</SECTNO>
                <SUBJECT>Fiddletown.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Fiddletown.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for the Fiddletown viticultural area are four U.S.G.S. maps entitled:</P>
                <P>(1) Fiddletown, CA, 1949, 7.5 minute series;</P>
                <P>(2) Amador City, CA, 1962, 7.5 minute series;</P>
                <P>(3) Pine Grove, CA, 1948 (photoinspected 1973), 7.5 minute series;</P>
                <P>(4) Aukum, CA, 1952 (photorevised 1973), 7.5 minute series.</P>
                <P>(c) <E T="03">Boundaries.</E> The Fiddletown viticultural area is located in Amador County, California. The boundaries are as follows:</P>
                <P>(1) From the beginning point at the north boundary where Fiddletown Shenandoah Road crosses Big Indian Creek in Section 28, Township 8 N, Range 11 E, proceed in a southwesterly direction following Big Indian Creek through the southeast corner of Section 29, crossing the northwest corner of Section 32 to where it meets Section 31;</P>
                <P>(2) Then in a southerly direction follow the Section line between Sections 31 and 32, Township 8 N, Range 11 E, and Sections 5 and 6, 7 and 8, Township 7 N, Range 11 E, to where the Section line meets the South Fork of Dry Creek;</P>
                <P>(3) Then following the South Fork of Dry Creek in an easterly direction crossing the lower portions of Sections 8, 9, 10, 11, 12 and into Township 8 N, Range 12 E, at Section 7 and across Section 7 to where it meets Section 8;</P>
                <P>(4) Then north following the Section line between Sections 7 and 8, 5 and 6 into Township 8 N, Range 12 E, between Sections 31 and 32, to Big Indian Creek; and</P>

                <P>(5) Then following Big Indian Creek in a northwesterly direction through <PRTPAGE P="165"/>Sections 31, 30, 25, 26 and 27, returning to the point of beginning.</P>
                <CITA>[T.D. ATF-147, 48 FR 45239, Oct. 4, 1983, as amended by T.D. ATF-249, 52 FR 5959, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.82</SECTNO>
                <SUBJECT>Potter Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Potter Valley.”</P>
                <P>(b) <E T="03">Approved map.</E> The approved maps for the Potter Valley viticultural area are the U.S.G.S. maps entitled “Potter Valley Quadrangle, California,” 1960, and “Ukiah Quadrangle, California,” 1958, 15 minute series (topographic).</P>
                <P>(c) <E T="03">Boundaries.</E> The Potter Valley viticultural area is located in Mendocino County, California. The boundaries are as follows:</P>
                <P>(1) From the beginning point at the southeast corner of quadrant 36 and southwest corner of quadrant 32 (a point where Mendocino and Lake Counties border on the T. 17 N.-T. 16 N. township line), the boundary runs northwest to the northeastern corner of quadrant 4, on the T. 18 N.-T. 17 N. township line;</P>
                <P>(2) Then west to the northwest corner of quadrant 1;</P>
                <P>(3) Then south to the southwest corner of quadrant 36;</P>
                <P>(4) Then east to R. 12 W.-R. 11 W. range line at the southeast corner of quadrant 36;</P>
                <P>(5) Then south to Highway 20;</P>
                <P>(6) Then southeast on Highway 20 to where Highway 20 passes from quadrant 20 to quadrant 21; and</P>
                <P>(7) Thence northeast, returning to the point of beginning.</P>
                <CITA>[T.D. ATF-151, 48 FR 46521, Oct. 13, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.83</SECTNO>
                <SUBJECT>Lake Erie.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Lake Erie.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Lake Erie viticultural area are four U.S.G.S. maps. They are titled:</P>
                <P>(1) “Toledo,” scale 1:250,000 (1956, revised 1978);</P>
                <P>(2) “Cleveland,” scale 1:250,000 (1956, revised 1972);</P>
                <P>(3) “Erie,” scale 1:250,000 (1959, revised 1972); and</P>
                <P>(4) “Buffalo,” scale 1:250,000 (1962).</P>
                <P>(c) <E T="03">Boundaries.</E> The Lake Erie viticultural area is located along the shore and on the islands of Lake Erie across the States of New York, Pennsylvania, and Ohio. The beginning point is where Buffalo Creek empties into Lake Erie at Buffalo Harbor.</P>
                <P>(1) From the beginning point the boundary proceeds up Buffalo Creek to the confluence of Cazenovia Creek.</P>
                <P>(2) The boundary proceeds up Cazenovia Creek and thence up the west branch of Cazenovia Creek to a point approximately one mile north of Colden, New York, exactly 12 statute miles inland from any point on the shore of Lake Erie.</P>
                <P>(3) The boundary proceeds southwestward and along a line exactly 12 statute miles inland from any point on the shore of Lake Erie to a point approximately one mile north of Dayton, New York, where it intersects the 1,300-foot contour line.</P>
                <P>(4) The boundary proceeds generally southwestward along the 1,300-foot contour line to a point almost two miles north-northwest of Godard, Pennsylvania, exactly six statute miles inland from any point on the shore of Lake Erie.</P>
                <P>(5) The boundary proceeds southwestward along a line exactly six statute miles inland from any point on the shore of Lake Erie to the point where it intersects Ohio Route 45 near the intersection with Interstate 90.</P>
                <P>(6) The boundary proceeds southward along Ohio Route 45 to a point exactly 14 statute miles inland from any point on the shore of Lake Erie approximately one mile north of Rock Creek, Ohio.</P>
                <P>(7) The boundary proceeds southwestward, then westward, then northwestward along a line 14 statute miles inland from any point on the shore of Lake Erie to the point where it intersects the Ohio-Michigan boundary just north of Centennial, Ohio.</P>

                <P>(8) The boundary then follows the Ohio-Michigan border in an easterly direction to the shoreline of Lake Erie. Thence in a generally southeasterly direction along the shoreline of Lake Erie to the mouth of the Portage River just north of Port Clinton. Thence due north in a straight line to the United <PRTPAGE P="166"/>States-Canada border. Thence in a southeasterly and then an easterly direction along the United States-Canada border until a point is reached which is due north of the easternmost point of Kelleys Island.</P>
                <P>(9) The boundary then proceeds due south until it reaches the shoreline of Lake Erie. Thence the boundary follows the lakeshore in a generally northeasterly direction to the beginning point at the mouth of Buffalo Creek.</P>
                <CITA>[T.D. ATF-156, 48 FR 48819, Oct. 21, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.84</SECTNO>
                <SUBJECT>Paso Robles.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Paso Robles”.</P>
                <P>(b) <E T="03">Approved map.</E> The map showing the boundaries of the Paso Robles viticultural area is: “San Luis Obispo”, NI 10-3, scale 1:250,000 (1956, revised 1969).</P>
                <P>(c) <E T="03">Boundaries.</E> The Paso Robles viticultural area is located within San Luis Obispo County, California. From the point of beginning where the county lines of San Luis Obispo, Kings and Kern Counties converge, the county line also being the township line between T.24S. and T.25S., in R.16E.:</P>
                <P>(1) Then in a westerly direction along this county line for 42 miles to the range line between R.9E. and R.10E.;</P>
                <P>(2) Then in a southerly direction for 12 miles along the range line to the southwest of corner of T.26S. and R.10E.;</P>
                <P>(3) Then in a southeasterly direction, approximately 5.5 miles to a point of intersection of the Dover Canyon Jeep Trail and Dover Canyon Road;</P>
                <P>(4) Then in an easterly direction along Dover Canyon Road, approximately 1.5 miles, to the western border line of Rancho Paso de Robles;</P>
                <P>(5) Then, following the border of the Paso Robles land grant, beginning in an easterly direction, to a point where it intersects the range line between R.11E. and R.12E.;</P>
                <P>(6) Then southeasterly for approximately 16.5 miles to the point of intersection of the township line between T.29S. and T.30S. and the range line between R.12E. and R.13E.;</P>
                <P>(7) Then in an easterly direction for approximately 6 miles to the range line between R.13E. and R.14E.;</P>
                <P>(8) Then in a northerly direction for approximately 6 miles to the township line between T.28S. and T.29S.;</P>
                <P>(9) Then in an easterly direction for approximately 18 miles to the range line between R.16E. and R.17E.;</P>
                <P>(10) Then in a northerly direction for approximately 24 miles to the point of beginning.</P>
                <CITA>[T.D. ATF-148, 48 FR 45241, Oct. 4, 1983, as amended by T.D. ATF-377, 61 FR 29953, June 13, 1996]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.85</SECTNO>
                <SUBJECT>Willow Creek.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Willow Creek.”</P>
                <P>(b) <E T="03">Approved map.</E> The map showing the boundary of the Willow Creek viticultural area is: “Willow Creek Quadrangle,” California, U.S.G.S. 15 minute series (1952).</P>
                <P>(c) <E T="03">Boundaries.</E> The Willow Creek viticultural area is located within portions of Humboldt and Trinity Counties, California. From the point of beginning where the 1,000-foot contour line intersects Kirkham Creek (directly north of section 19, T.7 N./R.5E.), beginning in a southerly direction, the boundary line the 1,000-foot contour line to;</P>
                <P>(1) The point of intersection between the 1,000-foot contour line and the north section line of section 27, T.6N./R.5E.;</P>
                <P>(2) Then in a straight, north easterly line to the point of intersection between the 1,000-foot contour line and the east section line of section 13, T.6N./R.5E.;</P>
                <P>(3) Then in a straight, northwesterly line to the point of intersection between the 1,000-foot contour line and the north section line of section 11, T.6N./R.5E.;</P>
                <P>(4) Then in a straight, south-southwesterly line to the point of intersection between the 1,000-foot contour line and the east section line of section 15, T.6N./R.5E.;</P>

                <P>(5) Then following the 1,000-foot contour line, beginning in a westerly direction, to the point of intersection between the 1,000-foot contour line and Coons Creek;<PRTPAGE P="167"/>
                </P>
                <P>(6) Then in a straight, westerly line to the point of beginning.</P>
                <CITA>[T.D. ATF-141, 48 FR 37376, Aug. 18, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.86</SECTNO>
                <SUBJECT>Anderson Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Anderson Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Anderson Valley viticultural area are three U.S.G.S. maps. They are titled:</P>
                <P>(1) “Navarro Quadrangle, California—Mendocino Co.,” 15 minute series (1961);</P>
                <P>(2) “Boonville Quadrangle, California—Mendocino Co.,” 15 minute series (1959); and</P>
                <P>(3) “Ornbaun Valley Quadrangle, California,” 15 minute series (1960).</P>
                <P>(c) <E T="03">Boundaries.</E> The Anderson Valley viticultural area is located in the western part of Mendocino County, California. The beginning point is at the junction of Bailey Gulch and the South Branch North Fork Navarro River in Section 8, Township 15 North (T.15N.), Range 15 West (R.15W.), located in the northeast portion of U.S.G.S. map “Navarro Quadrangle.”</P>
                <P>(1) From the beginning point, the boundary runs southeasterly in a straight line to an unnamed hilltop (elevation 2015 feet) in the northeast corner of Section 9, T.13N., R.13W., located in the southeast portion of U.S.G.S. map “Boonville Quadrangle”;</P>
                <P>(2) Then southwesterly in a straight line to Benchmark (BM) 680 in Section 30, T.13N., R.13W., located in the northeast portion of U.S.G.S. map “Ornbaun Valley Quadrangle”;</P>
                <P>(3) Then northwesterly in a straight line to the intersection of an unnamed creek and the south section line of Section 14, T.14N., R.15W., located in the southwest portion of U.S.G.S. map “Boonville Quadrangle”;</P>
                <P>(4) Then in a westerly direction along the south section lines of Sections 14, 15, and 16, T.14N., R.15W., to the intersection of the south section line of Section 16 with Greenwood Creek, approximately .2 miles west of Cold Springs Road which is located in the southeast portion of U.S.G.S. map “Navarro Quadrangle”;</P>
                <P>(5) Then in a southwesterly and then a northwesterly direction along Greenwood Creek to a point in Section 33 directly south (approximately 1.4 miles) of Benchmark (BM) 1057 in Section 28, T.15N., R.16W.;</P>
                <P>(6) Then directly north in a straight line to Benchmark (BM) 1057 in Section 28, T.15N., R.16W.;</P>
                <P>(7) Then in a northeasterly direction in a straight line to the beginning point.</P>
                <CITA>[T.D. ATF-139, 48 FR 37370, Aug. 18, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.87</SECTNO>
                <SUBJECT>Grand River Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Grand River Valley.”</P>
                <P>(b) <E T="03">Approved map.</E> The approved map for determining the boundary of the Grand River Valley viticultural area is the U.S.G.S. topographic map in the scale of 1:250,000, entitled Cleveland, number NK 17-8, dated 1956, revised 1972.</P>
                <P>(c) <E T="03">Boundary.</E> The Grand River Valley viticultural area is located in the following Ohio counties: Lake, Geauga, and Ashtabula. The viticultural area consists of all of the land within the Lake Erie viticultural area, described in § 9.83, which is also within 2 statute miles, in any direction, of the Grand River. Specifically, the Grand River Valley viticultural area consists of all of the land west of Ohio Route 45 which is within 2 statute miles, in any direction, of the Grand River, and which is also within 14 statute miles inland from any point on the shore of Lake Erie.</P>
                <CITA>[T.D. ATF-157, 48 FR 48821, Oct. 21, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.88</SECTNO>
                <SUBJECT>Pacheco Pass.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Pacheco Pass.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of Pacheco Pass viticultural area are two U.S.G.S. maps. They are titled:</P>
                <P>(1) San Felipe Quadrangle, 7.5 minute series, 1955 (photorevised 1971).</P>
                <P>(2) Three Sisters Quadrangle, 7.5 minute series, 1954 (photorevised 1971).</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Pacheco Pass viticultural area is located in California. The starting point of the following boundary description is the crossing of Pacheco Creek under <PRTPAGE P="168"/>California Highway 156, about 4 miles north of Hollister Municipal Airport, in San Benito County, California.</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) From the starting point northwestward along Pacheco Creek to the intersection with the straight-line extension of Barnheisel Road. (<E T="04">Note.</E> This is an old land grant boundary and appears on the U.S.G.S. map as the western boundary of an orchard.)</P>
                <P>(ii) From there in a straight line northeastward to the intersection of Barnheisel Road and California Highway 156.</P>
                <P>(iii) From there northward along Highway 156 to California Highway 152 (“Pacheco Pass Highway”).</P>
                <P>(iv) Then northward along Pacheco Pass Highway to the 37° latitude line.</P>
                <P>(v) Then eastward along that latitude line to the land line R. 5E./R. 6E.</P>
                <P>(vi) Then southward along that land line, crossing Foothill Road, and continuing southward to a point exactly 2,300 feet south of Foothill Road.</P>
                <P>(vii) From there is a straight line to the starting point.</P>
                <CITA>[T.D. ATF-167, 49 FR 9169, Mar. 12, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.89</SECTNO>
                <SUBJECT>Umpqua Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Umpqua Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Umpqua Valley viticultural area are two U.S.G.S. maps. They are titled:</P>
                <P>(1) “Roseburg,” scale 1:250,000 (1958, revised 1970); and</P>
                <P>(2) “Medford,” scale 1:250,000 (1955, revised 1976).</P>
                <P>(c) <E T="03">Boundaries.</E> The Umpqua Valley viticultural area is located entirely within Douglas County, Oregon, which is in the southwest part of the State. The beginning point is the intersection of Interstate Highway 5 with the Douglas/Lane County line in Township 21 South (T21S), Range 4 West (R4W) on the “Roseburg” map.</P>
                <P>(1) From the beginning point, the boundary proceeds north along the Douglas/Lane County line approximately .5 miles to the 1,000-foot contour line;</P>
                <P>(2) Thence northwest along the 1,000-foot contour line to the Douglas/Lane County line; thence west along the Douglas/Lane County line approximately 2.5 miles, returning to the 1,000-foot contour line; thence in a generally westerly direction along the 1,000-foot contour line to the R9W/R10W range line;</P>
                <P>(3) Thence south along the R9W/R10W range line approximately 2.75 miles to the center of the Umpqua River; thence along a straight line in an easterly direction approximately 6.25 miles to the intersection of range line R8W/R9W with the center of the Umpqua River; thence south along range line R8W/R9W approximately 3.5 miles to its intersection with township line T22S/T23S;</P>
                <P>(4) Thence southeast approximately 8.5 miles along a straight line to the intersection of township line T23S/T24S with range line R7W/R8W; thence south along the R7W/R8W range line approximately 8 miles to its intersection with the 1,000-foot contour line; thence in a southeasterly direction in a straight line approximately 3.5 miles toward the intersection of township line T25S/T26S with range line R6W/R7W, returning to the 1,000-foot contour line;</P>
                <P>(5) Thence in a southerly direction along the 1,000-foot contour line to the intersection of township line T27S/T28S with range line R7W/R8W; thence in a southwesterly direction in a straight line approximately 3.5 miles toward the intersection of township line T28S/T29S with range line R8W/R9W, returning to the 1,000-foot contour line; thence south along the 1,000-foot contour line to its intersection with township line T29S/T30S;</P>
                <P>(6) Thence east along township line T29S/T30S approximately .33 miles, rejoining the 1,000-foot contour line; thence in a northerly and eventually a southerly direction along the 1,000-foot contour line past the town of Riddle on the “Medford” map to range line R6W/R7W; thence south along the R6W/R7W range line approximately .5 miles back to the 1,000-foot contour line;</P>

                <P>(7) Thence in an easterly, westerly, and eventually a northerly direction along the 1,000-foot contour line to a point approximately 3.5 miles east of Dillard, where the contour line crosses Interstate Highway 5 on the “Roseburg” map; thence northeast along Interstate Highway 5 approximately .25 mile, returning to the 1,000-<PRTPAGE P="169"/>foot contour line; thence in a generally northeasterly, southeasterly, northwesterly, and eventually a northeasterly direction along the 1,000-foot contour line past the town of Idleyld Park to the R2W/R3W range line;</P>
                <P>(8) Thence north along range line R2W/R3W approximately 1.75 miles to the T25S/T26S township line; thence west along township line T25S/T26S approximately .25 mile, returning to the 1,000-foot contour line; thence in a generally westerly and then a northerly direction along the 1,000-foot contour line up the valley of Calapooya Creek to the R3W/R4W range line; thence north along range line R3W/R4W approximately 2.25 miles, back to the 1,000-foot contour line;</P>
                <P>(9) Thence in a westerly and then a northerly direction along the 1,000-foot contour line to the T23S/T24S township line; thence east along the T23S/T24S township line approximately 2.75 miles to the 1,000-foot contour line; thence in a northerly direction along the 1,000-foot contour line to its intersection with the Douglas/Lane County line; thence north along the Douglas/Lane County line approximately .75 mile to the point of beginning.</P>
                <CITA>[T.D. ATF-170, 49 FR 12246, Mar. 29, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.90</SECTNO>
                <SUBJECT>Willamette Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Willamette Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Willamette Valley viticultural area are three U.S.G.S. Oregon maps scaled 1:250,000. They are entitled:</P>
                <P>(1) “Vancouver,” Location Diagram NL 10-8, 1958 (revised 1974).</P>
                <P>(2) “Salem,” Location Diagram NL 10-11, 1960 (revised 1977).</P>
                <P>(3) “Roseburg,” Location Diagram NL 10-2, 1958 (revised 1970).</P>
                <P>(c) <E T="03">Boundaries.</E> The Willamette Valley viticultural area is located in the northwestern part of Oregon, and is bordered on the north by the Columbia River, on the west by the Coast Range Mountains, on the south by the Calapooya Mountains, and on the east by the Cascade Mountains, encompassing approximately 5,200 square miles (3.3 million acres). The exact boundaries of the viticultural area, based on landmarks and points of reference found on the approved maps, are as follows: From the beginning point at the intersection of the Columbia/Multnomah County line and the Oregon/Washington State line;</P>
                <P>(1) West along the Columbia/Multnomah County line 8.5 miles to its intersection with the Washington/Multnomah County line;</P>
                <P>(2) South along the Washington County line 5 miles to its intersection with the 1,000 foot contour line;</P>
                <P>(3) Northwest (15 miles due northwest) along the 1,000 foot contour line to its intersection with State Highway 47, .5 mile north of “Tophill”;</P>
                <P>(4) Then, due west from State Highway 47 one-quarter mile to the 1,000 foot contour line, continuing south and then southwest along the 1,000 foot contour line to its intersection with the Siuslaw National Forest (a point approximately 43 miles south and 26 miles west of “Tophill” ), one mile north of State Highway 22;</P>
                <P>(5) Due south 6.5 miles to the 1,000 foot contour line on the Lincoln/Polk County line;</P>
                <P>(6) Continue along the 1,000 foot contour line (approximately 23 miles) east, south, and then west, to a point where the Polk County line is intersected by the Lincoln/Benton County line;</P>
                <P>(7) South along Lincoln/Benton County line, 11 miles to its intersection with the Siuslaw National Forest line;</P>
                <P>(8) East along the Siuslaw National Forest line six miles, and then south along the Siuslaw National Forest line six miles to State Highway 34 and the 1,000 foot contour line;</P>
                <P>(9) South along the 1,000 foot contour line to its intersection with Township line T17S/T18S (31 miles southwest, and one mile west of State Highway 126);</P>
                <P>(10) East along T17S/T18S 4.5 miles to Range line R6W/R7W, south along this range line 2.5 miles to the 1,000 foot contour line;</P>
                <P>(11) Southeast along the 1,000 foot contour line to R5W/R6W (approximately six miles); southeast from this point eight miles to the intersection of R4W/R5W and T19S/T20S;</P>
                <P>(12) East along T19S/T20S 1.5 miles to the 1,000 foot contour line;</P>

                <P>(13) Following the 1,000 foot contour line north around Spencer Butte, and <PRTPAGE P="170"/>then south to a point along the Lane/Douglas County line one-half mile north of Interstate Highway 99;</P>
                <P>(14) South along the Lane/Douglas County line 1.25 miles to the 1,000 foot contour line;</P>
                <P>(15) Following the 1,000 foot contour line around the valleys of Little River, Mosby Creek, Sharps Creek and Lost Creek to the intersection of R1W/R1E and State Highway 58);</P>
                <P>(16) North along R1W/R1E, six miles, until it intersects the 1,000 foot contour line just north of Little Fall Creek;</P>
                <P>(17) Continuing along the 1,000 foot contour line around Hills Creek, up the southern slope of McKenzie River Valley to Ben and Kay Dorris State Park, crossing over and down the northern slope around Camp Creek, Mohawk River and its tributaries, Calapooia River (three miles southeast of the town of Dollar) to a point where Wiley Creek intersects R1E/R1W approximately one mile south of T14S/T13S;</P>
                <P>(18) North along R1E/R1W 7.5 miles to T12S/T13S at Cedar Creek;</P>
                <P>(19) West along T12S/T13S four miles to the 1,000 foot contour line;</P>
                <P>(20) Continuing in a general northerly direction along the 1,000 foot contour line around Crabtree Creek, Thomas Creek, North Santiam River (to its intersection with Sevenmile Creek), and Little North Santiam River to the intersection of the 1,000 foot contour line with R1E/R2E (approximately one mile north of State Highway 22);</P>
                <P>(21) North along R1E/R2E (through a small portion of Silver Falls State Park) 14 miles to T6S/T7S;</P>
                <P>(22) East along T6S/T7S six miles to R2E/R3E;</P>
                <P>(23) North along R2E/R3E six miles to T5S/T6S;</P>
                <P>(24) Due northeast 8.5 miles to the intersection of T4S/T5S and R4E/R3E;</P>
                <P>(25) East along T4S/T5S six miles to R4E/R5E;</P>
                <P>(26) North along R4E/R5E six miles to T3S/T4S;</P>
                <P>(27) East along T3S/T4S six miles to R5E/R6E;</P>
                <P>(28) North along R5E/R6E 10.5 miles to a point where it intersects the Mount Hood National Forest boundary (approximately three miles north of Interstate Highway 26);</P>
                <P>(29) West four miles and north one mile along the forest boundary to the 1,000 foot contour line (just north of Bull Run River);</P>
                <P>(30) North along the 1,000 foot contour line, into Multnomah County, to its intersection with R4E/R5E;</P>
                <P>(31) Due north approximately three miles to the Oregon/Washington State line; and</P>
                <P>(32) West and then north, 34 miles, along the Oregon/Washington State line to the beginning point.</P>
                <CITA>[T.D. ATF-162, 48 FR 54221, Dec. 1, 1983]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.91</SECTNO>
                <SUBJECT>Walla Walla Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Walla Walla Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Walla Walla Valley viticultural area are two U.S.G.S. maps, in the scale 1:100,000. They are entitled:</P>
                <P>(1) “Walla Walla,” Washington-Oregon, 1980</P>
                <P>(2) “Pendleton,” Oregon-Washington, 1983</P>
                <P>(c) <E T="03">Boundaries.</E> The Walla Walla Valley viticultural area is located within Walla Walla County in Washington State and Umatilla County in Oregon. It is entirely within the Columbia Valley viticultural area. The boundaries are as follows:</P>
                <P>(1) The beginning point is on the Walla Walla quadrangle map, in T8N/37E, at the point where the 2,000 foot contour line intersects with an unnamed light duty road approximately 250 feet east of U.S. Highway 12 in Minnick, Washington (on maps measured in metric units, this elevation is between the 600 and 650 meter contour lines),</P>
                <P>(2) Then the boundary goes northwest in a straight line for 7 kilometers (km), until it intersects with a power line that runs between T8N and T9N,</P>

                <P>(3) Then the boundary follows the power line west for 8 km, where it diverges from the power line and goes west-southwest in a straight line for approximately 33 km to the intersection of 2 unnamed light duty roads in the area marked Ninemile Canyon in the southwest corner of T8N/R33E,<PRTPAGE P="171"/>
                </P>
                <P>(4) Then the boundary goes south-southwest in a straight line approximately 8 km, until it reaches U.S. Highway 12, about 2.5 km east of Reese, Washington,</P>
                <P>(5) Then the boundary goes south in a straight line for approximately 8 km, crossing the Washington-Oregon state line and moving onto the Pendleton U.S.G.S. map, where it meets the 450 m contour line in T6N/R32E, near an unnamed peak with an elevation of 461 m,</P>
                <P>(6) Then the boundary follows the 450 m contour line in a generally southeasterly direction until it intersects Dry Creek in T4N/R35E,</P>
                <P>(7) Then the boundary goes southeast along Dry Creek (Oregon) until it reaches the 2000 foot contour line,</P>
                <P>(8) Then the boundary follows the 2000 foot contour line in a generally northeasterly direction, crossing the Oregon-Washington state line and returning to the Walla Walla U.S.G.S map, until it reaches the point of beginning.</P>
                <CITA>[T.D. ATF-441, 66 FR 11542, Feb. 26, 2001]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.92</SECTNO>
                <SUBJECT>Madera.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Madera.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Madera viticultural area are eleven U.S.G.S. maps. They are entitled:</P>
                <P>(1) “Clovis, Cal.,” 7<FR>1/2</FR> minute series, edition of 1964, photorevised 1972;</P>
                <P>(2) “Fresno North, Cal.,” 7<FR>1/2</FR> minute series, edition of 1965, photorevised 1972;</P>
                <P>(3) “Friant, Cal.,” 7<FR>1/2</FR> minute series, edition of 1964;</P>
                <P>(4) “Lanes Bridge, Cal.,” 7<FR>1/2</FR> minute series, edition of 1964, photoinspected 1973;</P>
                <P>(5) “Gregg, Cal.,” 7<FR>1/2</FR> minute series, edition of 1965;</P>
                <P>(6) “Madera, Cal.,” 7<FR>1/2</FR> minute series, edition of 1963;</P>
                <P>(7) “Kismet, Cal.,” 7<FR>1/2</FR> minute series, edition of 1961;</P>
                <P>(8) “Raynor Creek, Cal.,” 7<FR>1/2</FR> minute series, edition of 1961;</P>
                <P>(9) “Fresno, Cal.,” scaled 1:250,000, edition of 1962, revised 1971;</P>
                <P>(10) “Monterey, Cal.,” scaled 1:250,000, edition of 1974; and</P>
                <P>(11) “San Jose, Cal.,” scaled 1:250,000, edition of 1962, revised 1969.</P>
                <P>(c) <E T="03">Boundaries.</E> The Madera viticultural area is located in Madera and Fresno Counties, California. The beginning point is found on the “Fresno North,” 7<FR>1/2</FR> minute series U.S.G.S. map at the point where the San Joaquin River intersects the section line dividing sections 20 and 29, and sections 21 and 28, T. 12 S., R. 20 E.;</P>
                <P>(1) Then east approximately 6 miles following the section line and Shepherd Avenue to the intersection with Sunnyside Road;</P>
                <P>(2) Then north approximately 7 miles following Sunnyside Road and continuing along the section line to the point of intersection of section 16, 17, 20, and 21, T.11S., R 21E.;</P>
                <P>(3) Then west approximately 17.6 miles following the section line and continuing along Avenue 15 to the intersection with the Atchison, Topeka and Santa Fe Railroad;</P>
                <P>(4) Then northwest following the Atchison, Topeka and Santa Fe Railroad to Road 26;</P>
                <P>(5) Then north following Road 26 and continuing north in a straight line to the Chowchilla River in the “Raynor Creek” 7<FR>1/2</FR> minute series U.S.G.S. map, and in the “San Jose” scaled 1:250,000 U.S.G.S. map;</P>
                <P>(6) Then west following the Chowchilla River to the point where the Madera County-Merced County boundary diverges from the river;</P>
                <P>(7) Then southwest following the Madera County-Merced County boundary to the San Joaquin River;</P>
                <P>(8) Then following the San Joaquin River south and east returning to the point of beginning.</P>
                <CITA>[T.D. ATF-192, 49 FR 47833, Dec. 12, 1984; 50 FR 2782, Jan. 22, 1985, as amended by T.D. ATF-249, 52 FR 5960, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.93</SECTNO>
                <SUBJECT>Mendocino.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Mendocino.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries for the Mendocino viticultural area are seven U.S.G.S. maps. They are titled:</P>

                <P>(1) “Willits Quadrangle, California—Mendocino Co.,” 15 minute series (1961);<PRTPAGE P="172"/>
                </P>
                <P>(2) “Potter Valley Quadrangle, California,” 15 minute series (1960);</P>
                <P>(3) “Ukiah Quadrangle, California,” 15 minute series (1958);</P>
                <P>(4) “Hopland Quadrangle, California,” 15 minute series (1960);</P>
                <P>(5) “Boonville Quadrangle, California—Mendocino Co.,” 15 minute series (1959);</P>
                <P>(6) “Navarro Quadrangle, California—Mendocino Co.,” 15 minute series (1961);</P>
                <P>(7) “Ornbaun Valley Quadrangle, California,” 15 minute series (1960).</P>
                <P>(c) <E T="03">Boundaries.</E> The “Mendocino” viticultural area is located entirely within Mendocino County, California. The beginning point is the southeast corner of Section 30, Township 12 North (T. 12 N.), Range 10 West (R. 10 W.) located along the Mendocino County/Sonoma County line in the southeast quadrant of U.S.G.S. map “Hopland Quadrangle.”</P>
                <P>(1) From the beginning point, the boundary runs north along the eastern boundary of Sections 30, 19, 18, 7 and 6 to the point labeled Jakes Cr (Jakes Creek) located at the northwest corner of Section 5, T. 12 N., R. 10 W.;</P>
                <P>(2) Thence in a straight line in a northwest direction to the point labeled Bedford Rock in Section 3, T. 13 N., R. 11 W.;</P>
                <P>(3) Thence in a straight line in a northwest direction to a point labeled Red Mtn in Section 17, T. 14 N., R. 11 W.;</P>
                <P>(4) Thence in a straight line in a northwest direction to the southeast corner of Section 25, T. 16 N., R. 11 W.;</P>
                <P>(5) Thence in a straight line in a northeast direction to the northeast corner of Section 1, T. 16 N., R. 11 W. located along the Mendocino County/Lake County line;</P>
                <P>(6) Thence in a straight line in a northwest direction to the northeast corner of Section 5, T. 17 N., R. 11 W.;</P>
                <P>(7) Thence in a westerly direction along the T. 18 N./T. 17 N. township line until it intersects with the R. 13 W./R. 12 W. range line;</P>
                <P>(8) Thence in a straight line in a southwest direction to the point labeled Eagle Rock located in Section 16, T. 15 N., R. 13 W.;</P>
                <P>(9) Thence in a straight line in a southeast direction to the point labeled Bus McGall Peak located in Section 4, T. 13 N., R. 12 W.;</P>
                <P>(10) Thence in a straight line in a westerly direction to an unnamed hilltop, elevation 2,015 feet, in the northeast corner of Section 9, T. 13 N., R. 13 W.;</P>
                <P>(11) Thence in a straight line in a northwest direction to the junction of Baily Gulch and the South Branch, North Fork of the Navarro River, located in Section 8, T.15N., R.15W.;</P>
                <P>(12) Thence in a straight line in a southwest direction to Benchmark (BM) 1057 located in Section 28, T. 15 N., R. 16 W.;</P>
                <P>(13) Thence due south in a straight line approximately 1.4 miles to Greenwood Creek located in Section 33, T. 15 N., R. 16 W.;</P>
                <P>(14) Thence following Greenwood Creek in a generally southeasterly and then a northeasterly direction to where it intersects with the south section line of Section 16, T. 14 N., R. 15 W., approximately .2 miles west of Cold Springs Road;</P>
                <P>(15) Thence in an easterly direction along the south section lines of Sections 16, 15, and 14, T. 14 N., R. 15 W., to the intersection of the south section line of Section 14 with an unnamed creek;</P>
                <P>(16) Thence in a straight line in a southeasterly direction to Benchmark (BM) 680 located in Section 30, T. 13 N., R. 13 W.;</P>
                <P>(17) Thence continuing in a straight line in a southerly direction to the southwest corner of Section 5, T. 12 N., R. 13 W., and the Mendocino County/Sonoma County line;</P>
                <P>(18) Thence continuing in a straight line in a southeasterly direction to the intersection of the southwest corner of Section 32, T. 12 N., R. 11 W., and the Mendocino County/Sonoma County line;</P>
                <P>(19) Thence following the Mendocino County/Sonoma County line in an easterly, northerly, and then an easterly direction to the beginning point.</P>
                <CITA>[T.D. ATF-178, 49 FR 24714, June 15, 1984, as amended by T.D. ATF-397, 63 FR 16904, Apr. 7, 1998]</CITA>
              </SECTION>
              <SECTION>
                <PRTPAGE P="173"/>
                <SECTNO>§ 9.94</SECTNO>
                <SUBJECT>Howell Mountain.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Howell Mountain.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Howell Mountain viticultural area are four U.S.G.S. topographic maps in the 7.5 minute series, as follows:</P>
                <P>(1) “Detert Reservoir, CA.,” 1959 (photorevised 1980).</P>
                <P>(2) “Aetna Springs, CA.,” 1958 (photorevised 1981).</P>
                <P>(3) “Calistoga, CA.,” 1958 (photorevised 1980).</P>
                <P>(4) “St. Helena, CA.,” 1960 (photorevised 1980).</P>
                <P>(c) <E T="03">Boundaries.</E> The Howell Mountain viticultural area is located in Napa County, California, and is part of the Napa Valley viticultural area. The exact boundaries of the viticultural area, based on landmarks and points of reference found in the approved maps, as follows:</P>
                <P>(1) Beginning at the 1,400 foot contour line at the intersection of Sections 15 and 16 in R6W/T9N of the Detert Reservoir Quadrangle U.S.G.S. map.</P>
                <P>(2) Then continuing in an east and southeast direction along the 1,400 foot contour line to the southeast corner of Section 23 in R5W/T8N.</P>
                <P>(3) Then in a generally northwest direction along the 1,400 foot contour line until it intersects the line between Sections 21 and 22 in R6W/T9N.</P>
                <P>(4) Then north along the Section 21/22 boundary line to the starting point at the 1,400 foot contour line.</P>
                <CITA>[T.D. ATF-163, 48 FR 57487, Dec. 30, 1983, as amended by T.D. ATF-249, 52 FR 5960, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.95</SECTNO>
                <SUBJECT>Clarksburg.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Clarksburg.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Clarksburg viticultural area are eight U.S.G.S. topographic maps in the 7.5 minute series, as follows:</P>
                <P>(1) Sacramento West, Calif., 1967 (photorevised 1980).</P>
                <P>(2) Saxon, Calif., 1952 (photorevised 1968).</P>
                <P>(3) Clarksburg, Calif., 1967 (photorevised 1980).</P>
                <P>(4) Florin, Calif., 1968 (photorevised 1980).</P>
                <P>(5) Liberty Island, Calif., 1978.</P>
                <P>(6) Courtland, Calif., 1978.</P>
                <P>(7) Bruceville, Calif., 1978 (photorevised 1980).</P>
                <P>(8) Isleton, Calif., 1978.</P>
                <P>(c) <E T="03">Boundaries.</E> Beginning at a point (on the Sacramento West topographic map) in Yolo County in T8N/R4E, at the intersection of Jefferson Blvd. and Burrows Ave.,</P>
                <P>(1) Then southwest in a straight line 1.2 miles along Jefferson Blvd. to the eastern bank of the Sacramento River Deep Water Ship Channel.</P>
                <P>(2) Then southwest along the Sacramento River Deep Water Ship Channel, approximately 17 miles to T5N/R3E, to the Class 5 trail on the levee connecting the Sacramento River Deep Water Ship Channel and the dredger cut Miner Slough, approximately 2 miles from the Solano/Yolo County line.</P>
                <P>(3) Then east along the trail to the Miner Slough.</P>
                <P>(4) Then east along Miner Slough to the point where it joins Sutter Slough, then south along Sutter Slough around the tip of Sutter Island to the junction of Sutter Slough and Steamboat Slough; then north around Sutter Island along Steamboat Slough to Section 8 in T5N/R4E where Steamboat Slough joins the Sacramento River.</P>
                <P>(5) The southeast following the Sacramento River to the point where the Sacramento River meets the Delta Cross Channel at the Southern Pacific Railroad in Section 35, T5N/R4E.</P>
                <P>(6) Then northeast along the Southern Pacific Railroad for 2 miles, to a point <FR>1/3</FR> mile past the intersection of the Southern Pacific Railroad and the eastern branch of Snodgrass Slough.</P>
                <P>(7) Then east approximately 2<FR>1/2</FR> miles along the levee to Interstate 5 (under construction).</P>
                <P>(8) Then north approximately 8<FR>1/2</FR> miles along Interstate 5 (under construction, proposed, and completed) to Section 18 in T6N/R5E, at the intersection of Interstate 5 and Hood Franklin Road.</P>

                <P>(9) Then southwest along Hood Franklin Road to the Southern Pacific <PRTPAGE P="174"/>Railroad Levee, .1 mile northeast of Hood Junction.</P>
                <P>(10) Then north approximately 18 miles along the Southern Pacific Railroad Levee to Section 11 in T7N/R4E, at Freeport Blvd., and then across the Sacramento River at the line between Sections 11 and 14.</P>
                <P>(11) Then northwest along the west bank of the Sacramento River to Burrows Ave.</P>
                <P>(12) Then northwest along Burrows Ave. to the starting point at the intersection of Jefferson Blvd. and Burrows Ave.</P>
                <CITA>[T.D. ATF-166, 49 FR 2759, Jan. 23, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.96</SECTNO>
                <SUBJECT>Mississippi Delta.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Mississippi Delta.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Mississippi Delta viticultural area are three U.S.G.S. maps. They are titled:</P>
                <P>(1) Helena, scale of 1:250,000, 1955 (revised 1977).</P>
                <P>(2) Greenwood, scale of 1:250,000, 1953 (revised 1979).</P>
                <P>(3) Jackson, scale of 1:250,000, 1955 (revised 1973).</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Mississippi Delta viticultural area is located in Mississippi, Louisiana, and Tennessee. The starting point of the following boundary description is the intersection of the Illinois Central Gulf (I.C.G.) Railroad and the Mississippi River levee system, on the southeast side of Lake Horne, between Lake View, Mississippi, and Walls, Mississippi, on the Helena map.</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) From the starting point generally southward along the Mississippi River levee system until it again intersects the I.C.G. Railroad, near Twin Lake, Mississippi (about 10 miles north of Vicksburg, on the Jackson map). In any place where there is more than one continuous levee, the one closest to the Mississippi River is the boundary.</P>
                <P>(ii) From the intersection described in paragraph (c)(2)(i), the boundary continues southward along the I.C.G. tracks, until they merge with another branch of the I.C.G. Railroad, near Redwood, Mississippi.</P>
                <P>(iii) Then generally northeastward along that other branch of the I.C.G. Railroad, to the Leflore County-Holmes County line (on the Greenwood map).</P>
                <P>(iv) Then southeastward along that county line to the Leflore County-Carroll County line.</P>
                <P>(v) Then generally northward along that county line to Mississippi Route 7.</P>
                <P>(vi) Then generally northeastward along Route 7 to the 90°00′ longitude line.</P>
                <P>(vii) Then northward along that longitude line to Mississippi Route 8.</P>
                <P>(viii) Then eastward along Route 8 to Mississippi Route 35.</P>
                <P>(ix) Then northward along Route 35 to Mississippi Route 322 (on the Helena map).</P>
                <P>(x) Then generally eastward along Route 322 to the Panola Quitman Floodway.</P>
                <P>(xi) Then northward along that floodway to the range line R.9W./R.8W.</P>
                <P>(xii) Then northward along that range line to the 200 ft. contour line (north of Ballentine, Mississippi).</P>
                <P>(xiii) Then generally northeastward along that contour line to Mississippi Route 3.</P>
                <P>(xiv) Then northward along Route 3 to the Tunica County-Tate County line.</P>
                <P>(xv) Then northward along that county line to the Tunica County-De Soto County line.</P>
                <P>(xvi) Then northward along that county line to the I.C.G. Railroad.</P>
                <P>(xvii) Then northward along the I.C.G. tracks to the starting point.</P>
                <CITA>[T.D. ATF-181, 49 FR 34354, Aug. 30, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.97</SECTNO>
                <SUBJECT>Sonoita.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Sonoita.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of Sonoita viticultural area are seven U.S.G.S. maps. They are titled:</P>
                <P>(1) Benson Quadrangle, 15 minute series, 1958.</P>
                <P>(2) Fort Huachuca Quadrangle, 15 minute series, 1958.</P>
                <P>(3) Elgin Quadrangle, 15 minute series, 1958.</P>

                <P>(4) Lochiel Quadrangle, 15 minute series, 1958.<PRTPAGE P="175"/>
                </P>
                <P>(5) Mount Wrightson Quadrangle, 15 minute series, 1958.</P>
                <P>(6) Sunnyside Quadrangle, 15 minute series, 1958.</P>
                <P>(7) Empire Mountains Quadrangle, 15 minute series, 1958.</P>
                <P>(c) <E T="03">Bouldary</E>—(1) <E T="03">General.</E> The Sonoita viticultural area is located in Arizona. The starting point of the following boundary description is the summit of Mount Wrightson (9,543 feet) in the Santa Rita Mountains.</P>
                <P>(2) <E T="03">Boundary Description</E>—(i) From the starting point southeastward in a straight line for approximately 24 miles, to the summit of Lookout Knob (6,171 feet) in the Canelo Hills.</P>
                <P>(ii) From there in a straight line eastward for approximately 10 miles, to the summit of Huachuca Peak (8,410 feet) in the Huachuca Mountains.</P>
                <P>(iii) From there north-northwestward for approximately 21 miles in a straight line to the summit of Granite Peak (7,413 feet) in the Whetstone Mountains.</P>
                <P>(iv) From there west-southwestward in a straight line for approximately 26 miles, to the summit of Mount Wrightson (the point of beginning).</P>
                <CITA>[T.D. ATF-189, 49 FR 43054, Oct. 26, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.98</SECTNO>
                <SUBJECT>Monterey.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Monterey.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Monterey viticultural area are 36 U.S.G.S. quadrangle maps in the 7.5 minute series, as follows:</P>
                <P>(1) Sycamore Flat, CA, 1956, photoinspected 1972;</P>
                <P>(2) Junipero Serra Peak, CA, 1949, photoinspected 1972;</P>
                <P>(3) Reliz Canyon, CA, 1949;</P>
                <P>(4) Paraiso Springs, CA, 1956;</P>
                <P>(5) Thompson Canyon, CA, 1949, photo-revised 1979;</P>
                <P>(6) Cosio Knob, CA, 1948, photoinspected 1976;</P>
                <P>(7) Espinosa Canyon, CA, 1948;</P>
                <P>(8) San Ardo, CA, 1967;</P>
                <P>(9) Hames Valley, CA, 1949;</P>
                <P>(10) Tierra Redonda Mtn., CA, 1948;</P>
                <P>(11) Bradley, CA, 1949;</P>
                <P>(12) Wunpost, CA, 1948;</P>
                <P>(13) Pancho Rico Valley, CA, 1967;</P>
                <P>(14) Nattras Valley, CA, 1967;</P>
                <P>(15) San Lucas, CA, 1949;</P>
                <P>(16) Pinalito Canyon, CA, 1969;</P>
                <P>(17) North Chalone Peak, CA, 1969;</P>
                <P>(18) Soledad, CA, 1955;</P>
                <P>(19) Mount Johnson, CA, 1968;</P>
                <P>(20) Gonzales, CA, 1955;</P>
                <P>(21) Mt. Harlan Quadrangle, CA, 1968;</P>
                <P>(22) Natividad Quadrangle, CA, 1947, photo-revised 1968, photoinspected 1974;</P>
                <P>(23) San Juan Bautista Quadrangle, CA, 1955, photo-revised 1980;</P>
                <P>(24) Prunedale Quadrangle, CA, 1954, photo-revised 1981;</P>
                <P>(25) Watsonville East Quadrangle, CA, 1955, photo-revised 1980;</P>
                <P>(26) Watsonville West Quadrangle, CA, 1954, photo-revised 1980;</P>
                <P>(27) Moss Landing Quadrangle, CA, 1954, photo-revised 1980;</P>
                <P>(28) Marina Quadrangle, CA, 1947, photo-revised 1968 and 1974;</P>
                <P>(29) Monterey, CA, 1947, photo-revised 1968, photoinspected 1974;</P>
                <P>(30) Mt. Carmel, CA, 1956, photoinspected 1972;</P>
                <P>(31) Carmel Valley, CA, 1956, photoinspected 1974;</P>
                <P>(32) Spreckels, CA, 1947, photo-revised 1968, photoinspected 1975;</P>
                <P>(33) Chualar, CA, 1947, photo-revised 1968, photoinspected 1974;</P>
                <P>(34) Rana Creek, CA, 1956, photoinspected 1973; and</P>
                <P>(35) Palo Escrito Peak, CA, 1956;</P>
                <P>(36) Greenfield, CA, 1956;</P>
                <P>(37) Salinas, CA, 1947 (photorevised 1975); and</P>
                <P>(38) Seaside, CA, 1947 (photorevised 1968, photoinspected 1974).</P>
                <P>(c) <E T="03">Boundary.</E> The Monterey viticultural area is located in Monterey County, California. The boundary is as follows:</P>
                <P>(1) The beginning point is found on the “Sycamore Flat” U.S.G.S. 7.5 minute map at the junction of Arroyo Seco Road and the Jamesburg Road, in the southeast corner of section 21, T(ownship) 19 S., R(ange) 5 E. (This is also the beginning point for the Arroyo Seco viticultural area.)</P>
                <P>(2) The boundary proceeds directly west along the southern boundary of section 21 to the southwest corner of section 21, T. 19 S., R. 5 E.</P>

                <P>(3) Then southeast in a straight diagonal line across section 28 to the southeast corner of section 28, T. 19 S., R. 5 E.<PRTPAGE P="176"/>
                </P>
                <P>(4) Then directly east along the southern boundaries of sections 27, 26 and 25 in T. 19 S., R. 5 E., sections 30, 29, 28, 27, 26 and 25 in T. 19 S., R. 6 E., and sections 30, 29, and 28 in T. 19 S., R. 7 E. to the southeast corner of section 28, T. 19 S., R. 7 E.</P>
                <P>(5) Then south along the eastern boundary of section 33 to the southeast corner of section 33, T. 19 S., R. 7 E.</P>
                <P>(6) Then southeast in a straight diagonal line across section 3 to the southeast corner of section 3, T. 20 S., R. 7 E.</P>
                <P>(7) Then south southeast in a straight diagonal line across sections 11 and 14 to the southeast corner of section 14, T. 20 S., R. 7 E.</P>
                <P>(8) Then south along the western boundaries of sections 24 and 25 to the southwest corner of section 25, T. 20 S., R. 7 E.</P>
                <P>(9) Then east along the southern boundaries of sections 25 and 30 to the southeast corner of section 30, T. 20 S., R. 8 E.</P>
                <P>(10) Then southwest in a straight diagonal line across section 31 to the southwest corner of section 31, T. 20 S., R. 8 E.</P>
                <P>(11) Then west along the southern boundary of section 36, T. 20 S., R. 7 E., to the northwest corner of section 6, T. 21 S., R. 8 E.</P>
                <P>(12) Then south along the western boundaries of sections 6 and 7 to the southwest corner of section 7, T. 21 S., R. 8 E.</P>
                <P>(13) Then west along the northern boundary of section 13 to the northwest corner of section 13, T. 21 S., R. 7 E.</P>
                <P>(14) Then south along the western boundaries of sections 13 and 24 to the southwest corner of section 24, T. 21 S., R. 7 E.</P>
                <P>(15) Then east northeast in a straight diagonal line across section 24, T. 21 S., R. 7 E., and across section 19, T. 21 S., R. 8 E., to the northeast corner of section 19, T. 21 S., R. 8 E.</P>
                <P>(16) Then northeast in a straight diagonal line across section 17 to the northeast corner of section 17, T. 21 S., R. 8 E.</P>
                <P>(17) Then southeast in a straight diagonal line across sections 16, 22, 26 and 36 in T. 21 S., R. 8 E. and across sections 6, 8, and 16 in T. 22 S., R. 9 E. to the southeast corner of section 16, T. 22 S., R. 9 E.</P>
                <P>(18) Then east southeast in a straight diagonal line across sections 22, 23, 24, T. 22 S., R. 9 E., and across section 19, T. 22 S., R. 10 E., to the southeast corner of section 19, T. 22 S., R. 10 E.</P>
                <P>(19) Then south southeast in a straight diagonal line across sections 29, 32, and 33, T. 22 S., R. 10 E., to the southeast corner of section 4, T. 23 S., R. 10 E.</P>
                <P>(20) Then south southeast in a straight diagonal line across sections 10, 15, 23, and 26 to the southeast corner of section 26, T. 23 S., R. 10 E.</P>
                <P>(21) Then northwest in a straight diagonal line across section 26 to the northwest corner of section 26, T. 23 S., R. 10 E.</P>
                <P>(22) Then west northwest in a straight diagonal line across sections 22, 21, 20, and 19, T. 23 S., R. 10 E. to the northwest corner of section 24, T. 23 S., R. 9 E.</P>
                <P>(23) Then southeast across sections 24, 25, 30, 31, and 32, to the southeast corner of section 5, T. 24 S., R. 10 E.</P>
                <P>(24) Then east southeast in a straight diagonal line across section 9 to the southeast corner of section 10, T. 24 S., R. 10 E.</P>
                <P>(25) Then south southeast in a straight diagonal line across section 14 to the southeast corner of section 23, T. 24 S., R. 10 E.</P>
                <P>(26) Then southwest in a straight diagonal line to the southwest corner of section 26, T. 24 S., R. 10 E.</P>
                <P>(27) Then south along the western boundary of section 35 to the southwest corner of section 35, T. 24 S., R. 10 E.</P>
                <P>(28) Then east along the southern boundaries of sections 35 and 36 to the southeast corner of section 36, T. 24 S., R. 10 E.</P>
                <P>(29) Then north along the eastern boundaries of sections 36 and 25 to the northeast corner of section 25, T. 24 S., R. 10 E.</P>
                <P>(30) Then northeast in a straight diagonal line across sections 19, 18, and 17 to the northeast corner of section 8, T. 24 S., R. 11 E.</P>

                <P>(31) Then west northwest in a straight diagonal line across section 5 to the northwest corner of section 6, T. 24 S., R. 11 E.<PRTPAGE P="177"/>
                </P>
                <P>(32) Then north along the line separating Range 10 E. and Range 11 E. along the eastern boundary lines of sections 36, 25, 24, 13, 12 and 1 in Township 23 S., and along the western boundaries of sections 36, 25, 24, 13, 12 and 1 in Township 22 S., to the northeast corner of section 36, T. 21 S., R. 10 E.</P>
                <P>(33) Then west northwest in a straight diagonal line across sections 25, 26, 23, 22, 15, 16 and 9 to the northwest corner of section 8, T. 21 S., R. 10 E.</P>
                <P>(34) Then northwest in a straight diagonal line to the northwest corner of section 6, T. 21 S., R. 10 E.</P>
                <P>(35) Then west along the northern boundary of section 1, T. 21 S., R. 9 E. to the southeast corner of section 36, T. 20 S., R. 9 E.</P>
                <P>(36) Then northwest in a straight diagonal line across sections 36, 26, 22, 16, 8, and 6 in T. 20 S., R. 9 E. to the northwest corner of section 6, T. 20 S., R. 9 E.</P>
                <P>(37) Then north along the line separating Range 8 E. and Range 9 E. along the western boundaries of sections 36, 25, 24, 13, 12, and 1, T. 19S., R. 8 E. to the northeast corner of section 1, T. 19 S., R. 9 E.</P>
                <P>(38) Then northwest in a straight diagonal line to the point of intersection of the boundary line separating R. 7 E. and R. 8 E. and the boundary line separating T. 17 S. and T. 18 S.</P>
                <P>(39) Then west along the northern boundaries of sections 1 and 2 to the northwest corner of section 2, T. 18 S., R. 7 E.</P>
                <P>(40) Then northwest in a straight diagonal line across section 34 to the northwest corner of section 34, T. 17 S., R. 7 E.</P>
                <P>(41) Then west along the southern boundaries of sections 28 and 29 to the southwest corner of section 29, T. 17 S., R. 7 E.</P>
                <P>(42) Then northwest in a straight diagonal line across sections 30, 24, 14, 10 and 4 to the northwest corner of section 4, T. 17 S., R. 6 E.</P>
                <P>(43) Then north northeast in a straight line across the easternmost portion of section 32 to the northeast corner of section 32, T. 16 S., R. 6 E.</P>
                <P>(44) Then north along the eastern boundary of section 29 to the northeast corner of section 29, T. 16 S., R. 6 E.</P>
                <P>(45) Then northwest in a straight diagonal line across section 20 to the northwest corner of section 20, T. 16 S., R. 6 E.</P>
                <P>(46) Then west northwest in a straight diagonal line across sections 18 and 13 to the northwest corner of section 13, T. 16 S., R. 5 E.</P>
                <P>(47) Then north northwest in a straight diagonal line across sections 11 and 2 to the northwest corner of section 2, T. 16 S., R. 5 E.</P>
                <P>(48) Then west along the southern boundaries of section 34 and 33 to the southwest corner of section 33, T. 15 S., R. 5 E.</P>
                <P>(49) Then north along the western boundary of section 33, T. 15 S., R. 5 E., in a straight line for approximately 0.5 mile to the intersection with the Chualar Land Grant boundary at the northwestern corner of section 33, T. 15 S., R. 5 E.</P>
                <P>(50) Then northeast in a straight diagonal line across the Chualar Land Grant and section 27 to the northeast corner of section 27, T. 15 S., R. 5 E.</P>
                <P>(51) Then northwest in a straight diagonal line across section 22 to the northwest corner of section 22, T. 15 S., R. 5 E.</P>
                <P>(52) Then west in a straight line along the southern boundaries of sections 16 and 17, T. 15 S., R. 5 E., to the southwest corner of section 17 where it intersects with the Encinal Y Buena Esperanza Land Grant boundary.</P>
                <P>(53) Then north and then west along the eastern boundary of the Encinal Y Buena Esperanza Land Grant and the western boundaries of sections 21, 17, 8, and 7, T. 15 S., R. 5 E.</P>
                <P>(54) Then in a straight line from the northwest corner of the Encinal Y Buena Esperanza Land Grant boundary and section 7, T. 15 S., R. 5 E. in a west northwest direction to the point where the power transmission line (with located metal tower) intersects at the western boundary of the Cienega del Gabilan Land Grant and the eastern boundary of the El Alisal Land Grant, T. 14 S., R. 4 E.</P>

                <P>(55) Then north and then northwest along the boundary line between the Cienega del Gabilan Land Grant and El <PRTPAGE P="178"/>Alisal Land Grant to the westernmost corner of the Cienega del Gabilan Land Grant, T. 14 S., R. 4 E.</P>
                <P>(56) Then west along the boundary line between the Sausal Land Grant and La Natividad Land Grant to the point where the boundary line intersects Old Stage Road.</P>
                <P>(57) Then north along Old Stage Road to the point where Old Stage Road intersects the Monterey County—San Benito County line, T. 13 S., R. 4 E.</P>
                <P>(58) Then northwest along the Monterey County—San Benito County line to the point near the Town of Aromas where the boundary lines of the counties of Monterey, Santa Cruz, and San Benito meet, T. 12 S., R. 3 E.</P>
                <P>(59) Then in a meandering line along the Monterey County—Santa Cruz County line east then southeast to the Pacific Ocean, T. 12 S., R. 1 E.</P>
                <P>(60) Then south along the coastline of Monterey Bay to its intersection with the northwesternmost boundary of Fort Ord Military Reservation, T. 14 S., R. 1 E.</P>
                <P>(61) Then following the boundry line of the Fort Ord Military Reservation in an irregular line generally east, then south, then west to the point where the boundary line of the military reservation meets the Pacific Ocean, T. 15 S., R. 1 E.</P>
                <P>(62) Then following the coastline of the Monterey Peninsula south along the coastline of Carmel Bay to Carmel Point, the northwesternmost point of Point Lobos State Reserve on the Carmel Peninsula.</P>
                <P>(63) Then southeast in a straight diagonal line to the southwestern corner of section 25, T. 16 S., R. 1 W.</P>
                <P>(64) Then east along the southern boundaries of section 25, T. 16 S., R. 1 W., and sections 30 and 29, T. 16 S., R. 1 E., to the southeastern corner of section 29 where it intersects with the southwestern boundary of the El Potrero de San Carlos Land Grant.</P>
                <P>(65) Then southeast along the southwestern boundary line of the El Potrero de San Carlos Land Grant to the southeastern corner of section 33, T. 16 S., R. 1 E.</P>
                <P>(66) Then east along the line separating Township 16 S. and Township 17 S. and across Pinyon Peak to the southeast corner of section 32, T. 16 S., R. 2 E. (This is the beginning and ending point of the boundary of Carmel Valley viticultural area.)</P>
                <P>(67) Then continuing east along the line separating Township 16 S. from Township 17 S. to its point of intersection with the line separating Range 2 E. and Range 3 E.</P>
                <P>(68) Then north along the western boundaries of sections 31, 30, 19, 18, 7 and 6 in T. 16 S., R. 3 E. to the southwestern corner of section 31, T. 15 S., R. 3 E.</P>
                <P>(69) Then in a straight diagonal line east northeast across sections 31, 32 and 33, T. 15 S., R. 3 E. to the southeast corner of section 28, T. 15 S., R. 3 E.</P>
                <P>(70) Then southeast in a straight diagonal line along the eastern boundaries of sections 33 and 34, T. 15 S., R. 3 E., and sections 3, 2, 12, 16, 20, 21, and 28, T. 16 S., R. 4 E., to the point where the eastern boundary line of section 28 intersects the boundary line of the Guadalupe Y Llanitos de Los Correos Land Grant.</P>
                <P>(71) Then south to the southwest corner of section 34, T. 16 S., R. 4 E.</P>
                <P>(72) Then east to the northwest corner of section 2, T. 17 S., R. 4 E.</P>
                <P>(73) Then south along the eastern boundary of section 3 to the southeast corner of section 3, T. 17 S., R. 4 E.</P>
                <P>(74) Then southeast in a straight diagonal line across sections 11, 13, 19, and 29, to the southeast corner of section 29, T. 17 S., R. 5 E.</P>
                <P>(75) Then south along the western boundary of section 33 to the southwest corner of section 33, T. 17 S., R. 5 E.</P>
                <P>(76) Then east along the southern boundary of section 33 to the northeast corner of section 4, T. 18 S., R. 5 E.</P>
                <P>(77) Then southeast in a diagonal line acros sections 3 and 11 to the southeast corner of section 11, T. 18 S., R. 5 E.</P>
                <P>(78) Then south along the western boundary of section 13 to the southwest corner of section 13, T. 18 S., R. 5 E.</P>
                <P>(79) Then southeast in a diagonal line across section 24 to the southeast corner of section 24, T. 18 S., R. 5 E.</P>
                <P>(80) Then south along the western boundaries of section 30 and 31 to the southwest corner of section 31, T. 18 S., R. 6 E.</P>

                <P>(81) Then east along the southern boundaries of sections 31 and 32 to the southeast corner of section 32, T. 18 S., <PRTPAGE P="179"/>R. 6 E. (From this point, the Monterey and Arroyo Seco viticultural areas share the same boundary lines.)</P>
                <P>(82) Then south along the eastern boundaries of sections 5, 8, and 17 to Arroyo Seco Road, T. 19 S., R. 6 E.</P>
                <P>(83) Then southwest in a straight line for approximately 1.0 mile to Benchmark 673, T. 19 S., R. 6 E.</P>
                <P>(84) Then west in a straight line for approximately 1.8 miles to Bench Mark 649.</P>
                <P>(85) Then northwest in a straight line for approximately 0.2 mile to the northeast corner of section 23, T. 19 S., R. 5 E.</P>
                <P>(86) Then west following the northern boundaries of sections 23 and 22 to the northwest corner of section 22, T. 19 S., R. 5 E.</P>
                <P>(87) Then south in a straight line along the western boundary of section 22 to the point of beginning.</P>
                <CITA>[T.D. ATF-178, 49 FR 24718, June 15, 1984, as amended by T.D. ATF-249, 52 FR 5960, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.99</SECTNO>
                <SUBJECT>Clear Lake.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Clear Lake.”</P>
                <P>(b) <E T="03">Approved Maps.</E> The appropriate maps for determining the boundaries of the Clear Lake viticultural area are four U.S.G.S. maps. The maps are titled as follows:</P>
                <P>(1) “Lower Lake Quadrangle, California,” 15 minute series, 1958;</P>
                <P>(2) “Clearlake Oaks Quadrangle, California,” 15 minute series, 1960;</P>
                <P>(3) “Lakeport Quadrangle, California,” 15 minute series, 1958;</P>
                <P>(4) “Kelseyville Quadrangle, California,” 15 minute series, 1959.</P>
                <P>(c) <E T="03">Boundaries.</E> The Clear Lake viticultural area is located in southwestern Lake County, California. The descriptive boundaries of the viticultural area, using landmarks and points of reference on the applicable U.S.G.S. maps, are as follows:
                </P>
                <EXTRACT>
                  <P>
                    <E T="03">Lower Lake Quadrangle Map</E> (15 minute series); From the beginning point on Mt. Hannah in Section 16, Township 12 North (T12N), Range 8 West (R8W), identified as having an elevation of 3,978 feet, the boundary runs—</P>
                  <P>(1) East-southeasterly in a straight line to the point on Seigler Mountain in Section 23, T12N/R8W, identified as having an elevation of 3,692 feet;</P>
                  <P>(2) Then east-southeasterly in a straight line to the point on Childers Peak in Section 34, T12N/R7W, identified as having an elevation of 2,188 feet;</P>
                  <P>(3) Then east-northeasterly in a straight line to the point on the southeast corner of Section 25, T12N/R7W;</P>
                  <P>(4) Then northeasterly in a straight line to the point in Section 16, T12N/R6W, identified as being the “Baker Mine;”</P>
                  <P>(5) Then northwesterly in a straight line to the point at the southeast corner of Section 23, T13N/R7W;</P>
                  <P>(6) Then northerly along the east line of Sections 23, 14, 11, and 2, to the point at the northeast corner of Section 2, T13N/R7W, on the Clearlake Oaks Quadrangle map;</P>
                  <P>
                    <E T="03">Clearlake Oaks Quadrangle Map</E> (15 minute series); Continuing from the northeast corner of Section 2, T13N/R7W—</P>
                  <P>(7) Then northwesterly in a straight line to the point in Section 21, T14N/R7W, at the top of Round Mountain</P>
                  <P>(8) Then northwesterly in a straight line to the southeast corner of Section 4, T14N/R8W;</P>
                  <P>
                    <E T="03">Lakeport Quadrangle Map</E> (15 minute series); Continuing from the southeast corner of Section 4, T14N/R8W, on the Clearlake Oaks Quadrangle Map—</P>
                  <P>(9) Then northwesterly on the Lakeport Quadrangle in a straight line to a point on Charlie Alley Peak in Section 28, T16N/R9W, identified as having an elevation of 3,482 feet;</P>
                  <P>(10) Then westerly in a straight line to a point on Hells Peak in Section 29, T16N/R10W, identified as having an elevation of 2,325 feet;</P>
                  <P>(11) The southeasterly in a straight line to a point on Griner Peak in Section 23, T15N/R10W, identified as having an elevation of 2,132 feet;</P>
                  <P>(12) Then southwesterly in a straight line to a point on Scotts Mountain in Section 8, T14N/R10W, identified as having an elevation of 2,380 feet;</P>
                  <P>(13) Then southeasterly in a straight line to a point on Lakeport Peak in Section 35, T14N/R10W, identified as having an elevation of 2,180 feet;</P>
                  <P>
                    <E T="03">Kelseyville Quadrangle Map</E> (15 minute series); Continuing from Lakeport Peak in Section 35, T14N/R10W, on the Lakeport Quadrangle Map—</P>
                  <P>(14) Then southeasterly in a straight line to the point at the southwest corner of Section 1, T13N/R10W;</P>
                  <P>(15) Then south by southeast in a straight line to the point at the southeast corner of Section 36, T13N/R10W;</P>

                  <P>(16) Then south by southeasterly in a straight line to the point at the southwest corner of Section 18, T12N/R8W;<PRTPAGE P="180"/>
                  </P>
                  <P>(17) Then east by northeast in a straight line to the beginning point at Mount Hannah, Section 16, T12N/R8W, on the Lower Lake Quadrangle Map.</P>
                </EXTRACT>
                <CITA>[T.D. ATF-174, 49 FR 19468, May 8, 1984]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.100</SECTNO>
                <SUBJECT>Mesilla Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Mesilla Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of Mesilla Valley viticultural area are 15 U.S.G.S. quadrangle 7.5 minute series maps. They are entitled:</P>
                <P>(1) “Anthony, N. Mex.-Tex.,” 7.5 minute series, edition of 1955;</P>
                <P>(2) “Bishop Cap, N. Mex.,” 7.5 minute series, edition of 1955;</P>
                <P>(3) “Black Mesa, N. Mex.,” 7.5 minute series, edition of 1978;</P>
                <P>(4) “Canutillo, Tex.-N. Mex.,” 7.5 minute series, edition of 1955 (photorevised 1967);</P>
                <P>(5) “Dona Ana, N. Mex.,” 7.5 minute series, edition of 1978;</P>
                <P>(6) “La Mesa, N. Mex.,” 7.5 minute series, edition of 1955;</P>
                <P>(7) “La Union, N. Mex.-Tex.” 7.5 minute series, edition of 1955;</P>
                <P>(8) “Las Cruces, N. Mex.,” 7.5 minute series, edition of 1978;</P>
                <P>(9) “Leasburg, N. Mex.,” 7.5 minute series, edition of 1978;</P>
                <P>(10) “Little Black Mountain, N. Mex.,” 7.5 minute series, edition of 1978;</P>
                <P>(11) “Picacho Mountain, N. Mex.,” 7.5 minute series, edition of 1978;</P>
                <P>(12) “San Miguel, N. Mex.,” 7.5 minute series, edition of 1955;</P>
                <P>(13) “Smeltertown, Tex.-N. Mex.,” 7.5 minute series, edition of 1955 (photorevised 1967 and 1973);</P>
                <P>(14) “Strauss, N. Mex.-Tex.,” 7.5 minute series, edition of 1955; and</P>
                <P>(15) “Tortugas Mountain, N. Mex.,” 7.5 minute series, edition of 1955.</P>
                <P>(c) <E T="03">Boundaries.</E> The Mesilla Valley viticultural area is located within Dona Ana County, New Mexico, and El Paso County, Texas. The boundaries are as follows: The beginning point is at the Faulkner Canyon on the “Leasburg, N. Mex.” U.S.G.S. map at the northwest corner of Section 15, Township 21 South (T21S), Range 1 West (R1W).</P>
                <P>(1) From the beginning point, the boundary runs east 3.7 miles along the north section line until it converges with the 4,200 foot elevation contour line at Section 18, T21S/R1E;</P>
                <P>(2) Then it runs southeasterly 31 miles along the 4,200 foot elevation contour line to a point approximately 3.5 miles south of Bishop Cap where it intersects the Fort Bliss Military Reservation boundary at the northeast portion of Section 13, T25S/R3E on the “Bishop Cap, N. Mex.” U.S.G.S. map;</P>
                <P>(3) Then it follows the Fort Bliss Military Reservation boundary south for approximately 3.7 miles and east approximately .8 mile to the intersection with the 4,200 foot elevation contour line at the southeast portion of Section 6, T26S/R4E on the “Anthony, N. Mex.-Tex.” U.S.G.S. map;</P>
                <P>(4) Then it runs south along the 4,200 foot elevation contour line for approximately 20 miles until it intersects the La Mesa Road (Mesa Avenue) in the city limits of El Paso, Texas, on the “Smeltertown, Tex.-N. Mex.” U.S.G.S. map;</P>
                <P>(5) Then it heads south on the La Mesa Road (Mesa Avenue) for 1.2 miles until it meets Executive Center Boulevard that goes to La Guna/Smeltertown;</P>
                <P>(6) Then it travels in a southwesterly direction for 1.1 miles on Executive Center Boulevard to La Guna/Smeltertown until it crosses the Southern Pacific Railroad tracks at Smeltertown, Texas;</P>
                <P>(7) Then it proceeds back into New Mexico northwesterly along the Southern Pacific Railroad tracks approximately 12.5 miles to a point near the switch yards at Strauss, New Mexico, where it intersects the 4,100 foot elevation contour line at the center of Section 24, T28S/R2E on the “Strauss, N. Mex.-Tex.” U.S.G.S. map;</P>
                <P>(8) Then it follows the 4,100 foot elevation contour line in a northwesterly direction for 17 miles until it intersects with the south section line of Section 29, T25S/R2E, on the “Little Black Mountain, N. Mex.” U.S.G.S. map;</P>

                <P>(9) Then it runs westerly approximately .5 mile along the south section line until it meets the 4,150 foot elevation contour line at Section 29, T25S/R2E;<PRTPAGE P="181"/>
                </P>
                <P>(10) Then it follows the 4,150 foot elevation contour line northward for 15 miles until it meets with Interstate Highway 70/80/180 at the southeast corner of Section 19, T23S/R1E, on the “Las Cruces, N. Mex.” U.S.G.S. map;</P>
                <P>(11) Then it runs southwest along Interstate Highway 70/80/180 for approximately .9 mile until it reaches the 4,200 foot elevation contour line at the northwest corner of Section 30, T23S/R1E, on the “Picacho Mt., N. Mex.” U.S.G.S. map;</P>
                <P>(12) Then it meanders in a northerly direction on the 4,200 foot elevation contour line for 15 miles until it reaches the section line at the southwest corner of Section 15, T21S/R1W on the “Leasburg, N. Mex.” U.S.G.S. map;</P>
                <P>(13) Then finally it goes north along the section line to Faulkner Canyon until it meets with the northwest corner of Section 15, T21S/R1W, which is the beginning point.</P>
                <CITA>[T.D. ATF-197, 50 FR 6163, Feb. 14, 1985]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.101</SECTNO>
                <SUBJECT>The Hamptons, Long Island.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “The Hamptons, Long Island.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of “The Hamptons, Long Island” viticultural area are 5 U.S.G.S. maps. They are entitled:</P>
                <P>(1) “Riverhead, N.Y.,” 7.5 minute series, scaled at 1:24,000, edition of 1956;</P>
                <P>(2) “Eastport, N.Y.,” 7.5 minute series, scaled at 1:24,000, edition of 1956;</P>
                <P>(3) “New York, N.Y.; N.J.; Conn., U.S. 1:250,000 series, scaled at 1:250,000, edition of 1960, revised 1979;</P>
                <P>(4) “Providence, R.I.; Mass.; Conn.; N.Y., U.S. 1:250,000 series, scaled at 1:250,000, edition of 1947, revised 1969, and</P>
                <P>(5) “Hartford, Conn.; N.Y.; N.J.; Mass., U.S. 1:250,000 series, scaled at 1:250,000, edition of 1962, revised 1975.</P>
                <P>(c) <E T="03">Boundaries.</E> The boundaries of the viticultural area are as follows: “The Hamptons, Long Island” viticultural area is located entirely within eastern Suffolk County, Long Island, New York. The viticultural area boundaries consist of all of the land areas of the South Fork of Long Island, New York, including all of the beaches, shorelines, islands and mainland areas in the Townships of Southampton and East Hampton (including Gardiners Island). The beginning point is found on the “Riverhead, N.Y.” U.S.G.S. map on the Peconic River about 2 miles east of Calverton where the Townships of Riverhead, Brookhaven and Southampton meet:</P>
                <P>(1) The boundary travels south approximately 10 miles along the Southampton/Brookhaven Township line until it reaches the dunes on the Atlantic Ocean near Cupsogue Beach on the “Eastport, N.Y.” U.S.G.S. map.</P>
                <P>(2) Then the boundary proceeds east and west along the beaches, shorelines, islands and mainland areas of the entire South Fork of Long Island described on the “New York,” “Providence,” and “Hartford” U.S.G.S. maps until it reaches the Peconic River near Calverton at the beginning point. These boundaries consist of all of the land found in the Townships of Southampton and East Hampton (including Gardiners Island).</P>
                <CITA>[T.D. ATF-205, 50 FR 20413, May 16, 1985, as amended by T.D. ATF-344, 58 FR 40354, July 28, 1993]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.102</SECTNO>
                <SUBJECT>Sonoma Mountain.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Sonoma Mountain.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Sonoma Mountain viticultural area are 2 U.S.G.S. topographic maps in the 7.5 minute series, as follows:</P>
                <P>(1) Glen Ellen, Calif., dated 1954, photorevised 1980; and</P>
                <P>(2) Kenwood, Calif., dated 1954, photorevised 1980.</P>
                <P>(c) <E T="03">Boundary.</E> The Sonoma Mountain viticultural area is located in Sonoma County, California. The boundary is as follows:</P>
                <P>(1) The beginning point is the northern most point at which the 1600-foot contour line crosses the section line dividing section 22 from section 23, in Township 6 North, Range 7 West.</P>
                <P>(2) The boundary follows this section line north to the 800-foot contour line.</P>

                <P>(3) The boundary follows the 800-foot contour line westerly, easterly, and northerly to Bennett Valley Road.<PRTPAGE P="182"/>
                </P>
                <P>(4) The boundary follows Bennett Valley Road easterly to Enterprise Road.</P>
                <P>(5) The boundary follows Enterprise Road southeasterly to an unnamed stream, in Section 7, Township 6 North, Range 7 West, which crosses Enterprise Road near the point at which the road turns from an easterly to a southerly direction.</P>
                <P>(6) The boundary follows this stream easterly to the 400-foot contour line.</P>
                <P>(7) The boundary follows the 400-foot contour line southerly to the township line dividing Township 6 North from Township 5 North.</P>
                <P>(8) The boundary follows a straight line extension of this township line west to the 1200-foot contour line.</P>
                <P>(9) The boundary follows the 1200-foot contour line northwesterly to the range line dividing Range 6 West from Range 7 West.</P>
                <P>(10) The boundary follows this range line south to the 1600-foot contour line.</P>
                <P>(11) The boundary follows this contour line westerly to the beginning point.</P>
                <CITA>[T.D. ATF-196, 50 FR 2979, Jan. 23, 1985, as amended by T.D. ATF-249, 52 FR 5960, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.103</SECTNO>
                <SUBJECT>Mimbres Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Mimbres Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Mimbres Valley viticultural area are 28 U.S.G.S. quadrangle maps (26-7.5 minute series and 2-15 minute series). They are entitled:</P>
                <P>(1) “Akela, N. Mex.,” 7.5 minute series, edition of 1972;</P>
                <P>(2) “Antelope Hill, N. Mex.,” 7.5 minute series, edition of 1963 (photoinspected 1974);</P>
                <P>(3) “Bisbee Hills, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(4) “Bowlin Ranch, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(5) “Capital Dome, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(6) “Carne, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(7) “Columbus, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(8) “Columbus NE, N. Mex.,” 7.5 minute series, edition of 1966;</P>
                <P>(9) “Columbus SE, N. Mex.,” 7.5 minute series, edition of 1966;</P>
                <P>(10) “Deming East, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(11) “Deming West, N. Mex.,” 7.5 minute series, edition of 1964 (photoinspected 1972);</P>
                <P>(12) “Dwyer, N. Mex.,” 15 minute series, edition of 1956;</P>
                <P>(13) “Faywood Station, N. Mex.,” 7.5 minute series, edition of 1947;</P>
                <P>(14) “Florida Gap, N. Mex.,” 7.5 mintue series, edition of 1964;</P>
                <P>(15) “Goat Ridge, N. Mex.,” 7.5 minute series, edition of 1964;</P>
                <P>(16) “Gym Peak, N. Mex.,” 7.5 minute series, edition of 1964;</P>
                <P>(17) “Hermanas, N. Mex.,” 7.5 minute series, edition of 1964;</P>
                <P>(18) “Malpais Hill, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(19) “Midway Butte, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(20) “Myndus, N. Mex.,” 7.5 minute series, edition of 1972;</P>
                <P>(21) “North Peak, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(22) “Red Mountain, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(23) “San Lorenzo, N. Mex.,” 15 minute series, edition of 1956;</P>
                <P>(24) “Sibley Hole, N. Mex.,” 7.5 minute series, edition of 1972;</P>
                <P>(25) “South Peak, N. Mex.,” 7.5 minute series, edition of 1965;</P>
                <P>(26) “Spalding, N. Mex.,” 7.5 minute series, edition of 1964;</P>
                <P>(27) “West Lime Hills, N. Mex.,” 7.5 minute series, edition of 1965; and</P>
                <P>(28) “Williams Ranch, N. Mex.,” 7.5 minute series, edition of 1964.</P>
                <P>(c) <E T="03">Boundaries.</E> The Mimbres Valley viticultural area is located within Grant and Luna Counties, New Mexico. The boundaries are as follows: The beginning point is located at Faywood Station on an unimproved dirt road at benchmark 4911 in Luna County, New Mexico on the northern part of Section 2, Township 21 South (T21S), Range 12 West (R12W) on the Faywood Station Quadrangle U.S.G.S. map;</P>

                <P>(1) From the beginning point the boundary runs northeast 2.25 miles along an unimproved dirt road until it intersects U.S. Routh 180 (indicated on map as U.S. Rte. 260) at New Mexico <PRTPAGE P="183"/>Highway 61 (indicated on map as an unnumbered secondary highway) at the south portion of Sec. 30, T20S/R11W;</P>
                <P>(2) The boundary proceeds in a generally northerly direction on N.M. Hwy. 61 for 34.5 miles crossing over U.S. Rte. 90 (indicated on map as U.S. Rte. 180) west of San Lorenzo, N.M. until it meets an unimproved dirt road near Bear Canyon Dam at the west line of Sec. 28, T16S/R11W on the San Lorenzo, N. Mex. U.S.G.S. map;</P>
                <P>(3) It then heads east on the unimproved dirt road for .2 mile until it meets the Mimbres River at Sec. 28, T16S/R11W;</P>
                <P>(4) It then goes south on the Mimbres River for .25 mile until it intersects the 6,000 foot elevation contour line at Sec. 28, T16S/R11W;</P>
                <P>(5) From there the boundary runs south along the 6,000 foot elevation contour line until it meets the east line of Sec. 11, T17S/R11W;</P>
                <P>(6) Then it proceeds south on the section line for .6 mile until it hits the south line of Sec. 12, T17S/R11W;</P>
                <P>(7) Then it travels east on the section line for 1.8 miles until it intersects an unimproved dirt road in Noonday Canyon on the north line of Sec. 18, T17S/R10W;</P>
                <P>(8) It then heads south on the unimproved dirt road for 2.2 miles until it intersects a medium duty road at the northern part of Sec. 30, T17S/R10W;</P>
                <P>(9) The boundary goes south on the medium duty road for .8 mile until it reaches the north line of Sec. 31, T17S/R10W;</P>
                <P>(10) The boundary goes east 5 miles on the section line to the east line of Sec. 36, T17S/R10W;</P>
                <P>(11) The boundary proceeds south on the section line for 13 miles to the south line of Sec. 36 (also indicated on map as Luna/Grant Country line), T19S/R10W on the Dwyer, N. Mex. U.S.G.S. map;</P>
                <P>(12) The boundary travels west on the Luna/Grant County line for three miles to the east line of Sec. 4, T20S/R10W;</P>
                <P>(13) The boundary goes south on the section line for three miles to the south line of Sec. 16, T20S/R10W;</P>
                <P>(14) Then it goes west on the section line for approximately .6 mile to a light duty road located 500 feet south of Benchmark 5119 on the south line of Sec. 16, T20S/R10W;</P>
                <P>(15) The boundary heads south on the light duty road for approximately 10.25 miles until it meets Hwy. 180 at Benchmark 4672 near the west line of Sec. 9, T22S/R10W on the Spalding, N. Mex. U.S.G.S. map;</P>
                <P>(16) Then it proceeds southeasterly on Hwy. 180 for approximately 5 miles to the north line of Sec. 6, T23S/R9W on the Deming West, N. Mex. U.S.G.S. map;</P>
                <P>(17) It then goes east on the section line approximately 11.75 miles to the east line of Sec. 1, T23S/R8W on the Carne, N. Mex. U.S.G.S. map;</P>
                <P>(18) It then travels south on the section line for 1.5 miles until it meets an unimproved dirt road at Sec. 12, T23S/R8W;</P>
                <P>(19) It follows the unimproved dirt road in an easterly direction for 3 miles to Carne Windmill at the northeast part of Sec. 17, T23S/R7W;</P>
                <P>(20) From there it follows an unimproved dirt road in a southeasterly direction for .75 mile until it meets the south line of Sec. 16, T23S/R7W;</P>
                <P>(21) Then it proceeds east along the section line for 9 miles until it arrives at the east line of Sec. 24, T23S/R6W on the Myndus, N. Mex. U.S.G.S. map;</P>
                <P>(22) Then it goes south on the section line for 15 miles until it meets the south line of Sec. 36, T25S/R6W on the Sibley Hole, N. Mex. U.S.G.S. map;</P>
                <P>(23) Then it heads west on the section line for 8 miles until it intersects the 4,200 foot elevation contour line at the southeast corner of Sec. 34, T25S/R7W on the Gym Peak, N. Mex. U.S.G.S. map;</P>
                <P>(24) Then it heads north on the 4,200 foot elevation contour line for 11 miles until it meets N.M. Hwy. 549 (indicated on map as U.S. Rte. 70/80/180) at the southwest corner of Sec. 5, T24S/R7W on the Florida Gap, N. Mex. U.S.G.S. map;</P>
                <P>(25) The boundary heads west on M.M. Hwy. 549 (indicated on map as U.S. Rte. 70/80/180) for 4.5 miles until it meets the light duty road at the east line of Sec. 3, T24S/R8W on the Capital Dome, N. Mex. U.S.G.S. map;</P>

                <P>(26) It then goes south on the light duty road/section line for 4 miles until <PRTPAGE P="184"/>it meets another light duty road at the south line of Sec. 22, T24S/R8W;</P>
                <P>(27) Then the boundary heads west for 2 miles on the light duty road/section line until it intersects an unimproved dirt road at the east line of Sec. 29, T24S/R8W;</P>
                <P>(28) Then it travels south on the unimproved dirt road/section line for 2 miles until it meets another unimproved dirt road at the south line of Sec. 32, T24S/R8W;</P>
                <P>(29) It then moves west .25 mile on the unimproved dirt road until it reaches the east line of Sec. 5, T25S/R8W;</P>
                <P>(30) Then it goes south on the section line for 6 miles until it reaches an unimproved dirt road near Crawford Ranch at the north line of Sec. 5, T25S/R8W on the South Peak, N. Mex. U.S.G.S. map;</P>
                <P>(31) Then it follows the unimproved dirt road in a southwest then southern direction for approximately 3 miles until it hits the north line of Sec. 19, T26S/R8W;</P>
                <P>(32) It then travels east for 1.1 mile along the section line until it hits the east line of Sec. 20, T26S/R8W;</P>
                <P>(33) From there it proceeds south for 2 miles on the section line until it intersects the north line of Sec. 33, T26S/R8W;</P>
                <P>(34) It then heads east for 5 miles on the section line until it intersects the east line of Sec. 31, T26S/R7W on the Gym Peak, N. Mex. U.S.G.S. map;</P>
                <P>(35) The boundary goes south on the section line for 7 miles until it meets the north line of Sec. 5 (which also is a light duty road), T28S/R7W on the Columbus NE, N. Mex. U.S.G.S. map;</P>
                <P>(36) Then it goes east for 4 miles on the section line until it meets the east line of Sec. 2 near Oney Tank T28S/R7W;</P>
                <P>(37) Then it goes south on the section line for 8.7 miles until it meets the New Mexico, U.S.A./Mexico International border at the east line of Sec. 17, T29S/R7W on the Columbus SE, N. Mex. U.S.G.S. map;</P>
                <P>(38) The boundary follows in a westerly direction along the International border for 23 miles to the west line of Sec. 18, T29S/R10W on the Hermanas, N. Mex. U.S.G.S. map;</P>
                <P>(39) It then heads north on the western section for 3.5 miles to the north line of Sec. 31, T28S/R10W;</P>
                <P>(40) It then moves east for 13 miles on the section line until it intersects the east line of Sec. 32, T28S/R8W on the Columbus, N. Mex. U.S.G.S. map;</P>
                <P>(41) Then it follows the section line north for 8 miles until it meets the south line of Sec. 18, T27S/R8W on the North Peak, N. Mex. U.S.G.S. map;</P>
                <P>(42) Then it proceeds west on the section line for 11 miles to the west part of Sec. 16 identified as longitude point 107 degrees, 52 minutes, 30 seconds, T27S/R10W on the West Lime Hills, N. Mex. U.S.G.S. map;</P>
                <P>(43) Then it moves north on the 107 degrees, 52 minutes, 30 seconds longitude point for 9 miles until it intersects the north line of Sec. 4, T26S/R10W on the Midway Butte, N. Mex. U.S.G.S. map;</P>
                <P>(44) Then it goes west on the section line for 6.5 miles until it meets the west line of Sec. 33, T25S/R11W on the Bisbee Hills, N. Mex. U.S.G.S. map;</P>
                <P>(45) The boundary then travels north on the section line for 26.5 miles (crossing the Southern Pacific Railroad tracks) until it intersects with the Atchison, Topeka and Santa Fe Railroad tracks on the west line of Sec. 21, T21S/R11W on the Spalding, N. Mex. U.S.G.S. map;</P>
                <P>(46) Finally it follows the Atchison, Topeka and Santa Fe Railroad tracks in a northwesterly direction for 5 miles until it reaches the beginning point at benchmark 4911 on an unimproved dirt road in Faywood Station at Sec. 2, T21S/R12W on the Faywood Station, N. Mex. U.S.G.S. map.</P>
                <CITA>[T.D. ATF-217, 50 FR 48081, Nov. 21, 1985]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.104</SECTNO>
                <SUBJECT>South Coast.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “South Coast.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of South Coast viticultural area are four U.S.G.S. maps. They are titled:</P>
                <P>(1) San Diego, 1:250,000 series, 1958 (revised 1978).</P>
                <P>(2) Santa Ana, 1:250,000 series, 1959 (revised 1979).</P>

                <P>(3) Long Beach, 1:250,000 series, 1957 (revised 1978).<PRTPAGE P="185"/>
                </P>
                <P>(4) Wildomar Quadrangle, 7.5 minute series, 1953 (photorevised 1973).</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The South Coast viticultural area is located in California. The starting point of the following boundary description is the northern intersection of the Orange County line with the Pacific Ocean (on the Long Beach map).</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) From the starting point generally northeastward, eastward, and southeastward along the Orange County line, to the intersection of that county line with the township line on the northern border of Township 7 South (in Range 6 West; on the Santa Ana map).</P>
                <P>(ii) From there eastward along that township line to its intersection with the northern boundary of the Temecula viticultural area described in § 9.50; at this point, the Temecula viticultural area boundary coincides with the boundary of the Cleveland National Forest (on the Wildomar Quadrangle map).</P>
                <P>(iii) From there following the northern boundary of the Temecula viticultural area, at and near its northernmost point, generally northeastward, eastward, and southeastward until the Temecula viticultural area boundary again intersects the township line on the northern border of Township 7 South (in Range 4 West; thus all of the Temecula viticultural area is included inside of South Coast viticultural area).</P>
                <P>(iv) Then eastward, along the township line on the northern border of Township 7 South, to the San Bernardino Meridian (on the Santa Ana map).</P>
                <P>(v) Then southward along the San Bernardino Meridian to the Riverside County-San Diego County line.</P>
                <P>(vi) Then westward along that county line for about 7<FR>1/2</FR> miles, to the western boundary of the Cleveland National Forest (near the Pechanga Indian Reservation).</P>
                <P>(vii) Then generally southeastward along the Cleveland National Forest boundary to where it joins California Highway 76.</P>
                <P>(viii) From there generally southeastward along Highway 76 to California Highway 79.</P>
                <P>(ix) Then southeastward along Highway 79 to the township line on the northern border of Township 12 South (in Range 3 East).</P>
                <P>(x) Then eastward along that township line to its intersection with the range line on the eastern border of Range 3 East.</P>
                <P>(xi) From there southward along that range line to the U.S.-Mexico international border.</P>
                <P>(xii) Then westward along that international border to the Pacific Ocean.</P>
                <P>(xiii) Then generally northwestward along the shore of the Pacific Ocean to the starting point.</P>
                <CITA>[T.D. ATF-218, 50 FR 48084, Nov. 21, 1985]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.105</SECTNO>
                <SUBJECT>Cumberland Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Cumberland Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Cumberland Valley viticultural area are the following 32 U.S.G.S. topographical maps of the 7.5 minute series:</P>
                <P>(1) “Williamsport Quadrangle”, edition of 1969.</P>
                <P>(2) “Shepherdstown Quadrangle”, edition of 1978.</P>
                <P>(3) “Keedysville Quadrangle”, edition of 1978.</P>
                <P>(4) “Middletown Quadrangle”, edition of 1953, photo-revised 1979.</P>
                <P>(5) “Myersville Quadrangle”, edition of 1953, photo-revised 1971.</P>
                <P>(6) “Smithsburg Quadrangle”, edition of 1953, photo-revised 1971.</P>
                <P>(7) “Waynesboro Quadrangle”, edition of 1944, photo-revised 1968 and 1973.</P>
                <P>(8) “Iron Springs Quadrangle”, edition of 1953, photo-revised 1968 and 1973.</P>
                <P>(9) “Scotland Quadrangle”, edition of 1944, photo-revised 1968 and 1973.</P>
                <P>(10) “Caledonia Park Quadrangle”, edition of 1944, photo-revised 1968 and 1973.</P>
                <P>(11) “Walnut Botton Quadrangle”, edition of 1952, photo-revised 1969 and 1977.</P>
                <P>(12) “Dickinson Quadrangle”, edition of 1952, photo-revised 1969 and 1977.</P>
                <P>(13) “Mount Holly Springs Quadrangle”, edition of 1952, photo-revised 1968 and 1973.</P>

                <P>(14) “Mechanicsburg Quadrangle”, edition of 1952, photo-revised 1968 and 1973.<PRTPAGE P="186"/>
                </P>
                <P>(15) “LeMoyne Quadrangle”, edition of 1963, photo-revised 1972.</P>
                <P>(16) “Steelton Quadrangle”, edition of 1963, photo-revised 1972.</P>
                <P>(17) “Harrisburg West Quadrangle”, edition of 1969, photo-revised 1974.</P>
                <P>(18) “Wertzville Quadrangle”, edition of 1952, photo-revised 1968 and 1973.</P>
                <P>(19) “Sherman's Dale Quadrangle”, edition of 1952, photo-revised 1968 and 1973.</P>
                <P>(20) “Landisburg Quadrangle”, edition of 1952, photo-revised 1969 and 1977.</P>
                <P>(21) “Andersonburg Quadrangle”, edition of 1952, photo-revised 1969 and 1977.</P>
                <P>(22) “Newville Quadrangle”, edition of 1952, photo-revised 1969 and 1975.</P>
                <P>(23) “Newburg Quadrangle”, edition of 1966, photo-revised 1973.</P>
                <P>(24) “Doylesburg Quadrangle”, edition of 1966, photo-revised 1973.</P>
                <P>(25) “Roxbury Quadrangle”, edition of 1966, photo-revised 1973.</P>
                <P>(26) “Fannettsburg Quadrangle”, edition of 1966, photo-revised 1973.</P>
                <P>(27) “St. Thomas Quadrangle” edition of 1944, photo-revised 1968 and 1973.</P>
                <P>(28) “McConnellsburg Quadrangle”, edition of 1944, photo-revised 1968 and 1973.</P>
                <P>(29) “Mercersburg Quadrangle”, edition of 1943, photo-revised 1968 and 1973.</P>
                <P>(30) “Clear Spring Quadrangle”, edition of 1955, photo-revised 1971.</P>
                <P>(31) “Hedgesville Quadrangle”, edition of 1979.</P>
                <P>(32) “Mason Dixon Quadrangle”, edition of 1943-53 (photorevised 1971).</P>
                <P>(33) “Hagerstown Quadrangle”, edition of 1943-53 (photorevised 1971, photoinspected 1977).</P>
                <P>(34) “Funkstown Quadrangle”, edition of 1943-53 (photorevised 1971, photoinspected 1977).</P>
                <P>(35) “Plainfield Quadrangle”, edition of 1975.</P>
                <P>(36) “Shippensburg Quadrangle”, edition of 1973.</P>
                <P>(37) “Chambersburg Quadrangle”, edition of 1973.</P>
                <P>(38) “Williamson Quadrangle”, edition of 1973.</P>
                <P>(39) “Greencastle Quadrangle”, edition of 1973.</P>
                <P>(40) “Dillsburg Quadrangle”, edition of 1973.</P>
                <P>(c) <E T="03">Boundary.</E> The Cumberland Valley viticultural area is located in Washington County in west-central Maryland and Franklin and Cumberland counties in south-central Pennsylvania. The boundary is as follows:</P>
                <P>(1) Starting immediately west of the Town of Williamsport in Washington County, Maryland, at Lock 45 of the Chesapeake &amp; Ohio (C&amp;O) Canal National Historical Park and the confluence of the Potomac River and Conococheague Creek (see Williamsport Quadrangle), the boundary proceeds in a southeasternly direction along the perimeter of the park on the northeastern bank of the Potomac River to the confluence of Antitam Creek and the Potomac River;</P>
                <P>(2) Then southeast of Limekiln Road which runs along the perimeter of the park from Antietam Creek to the intersection of Limekiln Road and Harpers Ferry Road;</P>
                <P>(3) Then northeasterly a straight line approximately two miles to the 952-foot summit of Hawk's Hill;</P>
                <P>(4) Then northerly on a straight line approximately 2.5 miles to the intersection of Red Hill Road and Porterstown Road;</P>
                <P>(5) Then southeasterly along Porterstown Road to its intersection with Mount Briar—Trego Road;</P>
                <P>(6) Then southerly along Mount Briar—Trego Road to its intersection with Millbrook Road;</P>
                <P>(7) Then east along Millbrook Road to its intersection with State Route 67, approximately 0.5 mile north of Rohersville, Maryland;</P>
                <P>(8) Then directly east approximately 1.25 miles in a straight line to the 1,000-foot contour line of South Mountain;</P>
                <P>(9) Then in a north northeasterly direction along the 1,000-foot contour line of South Mountain in Washington County, Maryland, and Franklin and Cumberland counties in Pennsylvania to the point on South Mountain where the 1,000-foot contour line crosses State Hollow Road (Rt. 233);</P>
                <P>(10) Then north along Rt. 233 to the point where it crosses the 750-foot contour of South Mountain;</P>

                <P>(11) Then east along the 750-foot contour line of South Mountain to the point southwest of the Mount Holly Springs Reservoir where Cold Spring Run, a tributary of Yellow Breeches Creek, crosses the 750-foot contour line, approximately 3 miles southwest <PRTPAGE P="187"/>of the town of Mount Holly Springs, Pennsylvania;</P>
                <P>(12) Then east northeast in a straight line approximately seven miles to Center Point Knob, elev. 1050 feet, approximately two miles southeast of Boiling Springs, Pennsylvania (see Mechanicsburg Quadrangle);</P>
                <P>(13) Then continuing east northeast in a straight line approximately six miles to the point where U.S. Rt. 15 crosses Yellow Breeches Creek, approximately one mile east of Williams Grove, Pennsylvania;</P>
                <P>(14) Then east and northeast in a meandering line along the north bank of Yellow Breeches Creek to its confluence with the Susquehanna River;</P>
                <P>(15) Then north along the west bank of the Susquehanna River, which forms the western portion of the corporate boundary line of the City of Harrisburg, Pennsylvania, to the point where the 300-foot contour line and the west bank of the Susquehanna River meet;</P>
                <P>(16) Then directly west to the 700-foot contour line of Blue Mountain overlooking the Susquehanna River;</P>
                <P>(17) Then along the 700-foot contour line of Blue Mountain as it meanders west and around McClures Gap;</P>
                <P>(18) Then along the 700-foot contour line of Blue Mountain to the point where the 700-foot contour line crosses State Rt. 233;</P>
                <P>(19) Then northeast along Rt. 233 through Doubling Gap to the 1,000-foot contour line of Blue Mountain;</P>
                <P>(20) Then in a generally southwesterly direction along the 1,000-foot contour line of Blue Mountain into Franklin County to the point where the 1,000-foot contour line meets the roadbed of the Pennsylvania Turnpike, Interstate 76;</P>
                <P>(21) Then along the roadbed of the Pennsylvania Turnpike to the east entrance of the Blue Mountain Tunnel;</P>
                <P>(22) Then in a straight line approximately 6.5 miles to the intersection of State Rt. 533 and the 1,000-foot contour line of Blue Mountain, approximately one mile west northwest of Upper Strasburg, Pennsylvania;</P>
                <P>(23) Then southwest along the 1,000-foot contour line of Blue Mountain to and along the 1,000-foot contour line of Broad Mountain;</P>
                <P>(24) Then along the 1,000-foot contour line as it meanders along and around Broad Mountain and Front Mountain to the point where the 1,000-foot contour line crosses Wilson Run near Franklin Furnace, Pennsylvania;</P>
                <P>(25) Then southwest in a straight line approximately 3.5 miles to Parnell Knob, elev. 2060 feet;</P>
                <P>(26) Then west northwest in a straight line approximately four miles to the point where the 1,000-foot contour line crosses Township Run near Cape Horn on Cove Mountain, approximately two miles north northwest of Fort Loudon, Pennsylvania;</P>
                <P>(27) Then southwest along the 1,000-foot contour line of Cove Mountain into and out of Cove Gap;</P>
                <P>(28) Then along the 1,000-foot contour line of Cove Mountain and Two Top Mountain in Franklin County, Pennsylvania, and Sword Mountain and Fairview Mountain in Washington County, Maryland, to the point on Fairview Mountain where the 1,000-foot contour line intersects the National Road (U.S. Rt. 40);</P>
                <P>(29) Then west along U.S. Rt. 40 approximately 0.5 mile to the intersection of U.S. Rt. 40 and Cove Road;</P>
                <P>(30) Then south in a straight line from the intersection of U.S. Rt. 40 and Cove Road approximately 1.25 miles to the intersection of McCoys Ferry Road and State Rt. 56;</P>
                <P>(31) Then south along McCoys Ferry Road to the perimeter of the C&amp;O Canal National Historical Park along the Potomac River;</P>
                <P>(32) Then southeast along the perimeter of the C&amp;O National Historical Park to the point of beginning.</P>
                <CITA>[T.D. ATF-210, 50 FR 29971, July 23, 1985, as amended by T.D. ATF-249, 52 FR 5960, Feb. 27, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.106</SECTNO>
                <SUBJECT>North Yuba.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “North Yuba.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of North Yuba viticultural area are the following four U.S.G.S. topographical maps of the 7.5 minute series:</P>

                <P>(1) “Oregon House Quadrangle,” edition of 1948, photo-revised 1969.<PRTPAGE P="188"/>
                </P>
                <P>(2) “Rackerby Quadrangle,” edition of 1948, photo-revised 1969.</P>
                <P>(3) “Challenge Quadrangle,” edition of 1948 photo-revised 1969.</P>
                <P>(4) “French Corral Quadrangle,” edition of 1948, photo-revised 1969.</P>
                <P>(c) <E T="03">Boundary.</E> The North Yuba viticultural area is located in Yuba County in the State of California. The boundary is as follows:</P>
                <P>(1) Beginning on the “Oregon House Quadrangle” map at the point where the Browns Valley Ditch crosses Woods Creek in the southwest corner of section 25, T. 17 N., R. 6 E., the boundary proceeds northeasterly in a meandering line approximately 1.5 miles along the east bank of Woods Creek to the point near Richards Ranch where the paved light duty road crosses said creek;</P>
                <P>(2) Then west and north, approximately 0.33 mile to the point where the paved light duty road meets the unimproved dirt road accessing Dixon Hill and Texas Hill;</P>
                <P>(3) Then northwest continuing along the paved light duty road approximately 2.75 miles to the intersection at Oregon House of said light duty road with the medium duty road which travels east and west between Virginia Ranch Reservoir of Dry Creek and the Yuba County Forestry Headquarters near Dobbins;</P>
                <P>(4) Then northeasterly, 0.7 mile, along same light duty road to its intersection with the unimproved dirt road to Lake Mildred, located in the northwest corner of section 2, T. 17 N., R. 6 E.;</P>
                <P>(5) Then northwesterly, 1.0 miles, along the unimproved dirt road to the end of said road at the shoreline of Lake Mildred;</P>
                <P>(6) Then southwest along the shoreline of Lake Mildred to the Los Verjeles Dam at the westernmost end of said lake;</P>
                <P>(7) Then across the face of said dam and continuing northeast along the shoreline of Lake Mildred to the point where the stream running through Smokey Ravine flows into Lake Mildred;</P>
                <P>(8) Then north and west along said stream to the point where the stream crosses the 1,900-foot contour line in the northeast corner of section 27, T. 18 N., R. 6 E.;</P>
                <P>(9) Then southwest in a meandering line along the 1.900-foot contour line of Lamb Hill;</P>
                <P>(10) Then northwest along the 1,900-foot contour line of High Spring Ridge to the point where the medium duty paved road running north and south along Willow Glen Creek crosses the 1,900-foot contour line, approximately 0.75 mile north of Finley Ranch;</P>
                <P>(11) Then north along said road, approximately 1 mile, to its intersection at Willow Glen Ranch near the west boundary line of section 15, T. 18 N., R. 6 E., with the light duty road which crosses Critterden Ridge;</P>
                <P>(12) Then in a generally easterly direction along said road, approximately 2.0 miles, to its point of intersection with the light duty paved road named Frenchtown Road which runs north and south between Brownsville and Frenchtown;</P>
                <P>(13) Then south along the Frenchtown Road to the point where the road crosses the 1,600-foot contour line in the northwest corner of section 24, T. 18 N., R. 6 E.;</P>
                <P>(14) Then east along the 1,600-foot contour line to the point where Dry Creek crosses the 1,600-foot contour line near the south boundary line of section 13, T. 18 N., R. 6 E.;</P>
                <P>(15) Then south along Dry Creek, approximately 0.16 mile, to the confluence of Indiana Creek with Dry Creek;</P>
                <P>(16) Then in a generally easterly direction, approximately 1 mile, along Indiana Creek to the confluence of Keystone Creek with Indiana Creek;</P>
                <P>(17) Then north along indiana Creek, approximately 0.87 mile, to the point where Indiana Creek meets the 2,000-foot contour line of Oregon Hills;</P>
                <P>(18) Then in a generally southeasterly direction along the 2,000-foot contour line of Oregon Hills, approximately 6 miles, to the point near the east boundary line of section 9, T. 17 N., R. 7 E., where the power transmission line on Red Bluff crosses the 2,000-foot contour line;</P>

                <P>(19) Then southwest along the right of way of said power transmission line to the point near the south boundary of section 9, T. 17 N., R. 7 E., where it <PRTPAGE P="189"/>meets the power transmission line running northwest and southeast between Dobbins and the Colgate Power House;</P>
                <P>(20) Then southeast along the power transmission line between Dobbins and Colgate Power House to the Colgate Power House;</P>
                <P>(21) Then in a generally westerly direction from the Colgate Power House along the power transmission line which crosses over Dobbins Creek to the point west of Dobbins Creek where the power transmission line intersects the 1,000-foot contour line;</P>
                <P>(22) Then in a generally southwesterly direction along the 1,000-foot contour line above the north bank of the Yuba River and Harry L. Englebright lake of the Yuba River to the intersection of the 1,000-foot contour line with Woods Creek in the northeast corner of section 36, T. 17 N., R. 6 E.;</P>
                <P>(23) Then east and north along the east bank of Woods Creek, approximately 0.5 miles, to the point of beginning.</P>
                <CITA>[T.D. ATF-211, 50 FR 30820, July 30, 1985]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.107</SECTNO>
                <SUBJECT>Lodi.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Lodi.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Lodi viticultural area are 18 U.S.G.S. 7.5 minute series maps and are titled as follows:</P>
                <P>(1) Valley Springs SW, Calif. 1962;</P>
                <P>(2) Farmington, Calif. 1968 (Photorevised 1987);</P>
                <P>(3) Peters, CA 1952 (Photorevised 1968);</P>
                <P>(4) Stockton East, Calif. 1968 (Photorevised 1987);</P>
                <P>(5) Waterloo, Calif. 1968 (Photoinspected 1978);</P>
                <P>(6) Lodi South, Calif. 1968 (Photorevised 1976);</P>
                <P>(7) Terminous, Calif. 1978 (Minor Revision 1993);</P>
                <P>(8) Thornton, Calif. 1978;</P>
                <P>(9) Bruceville, Calif. 1968 (Photorevised 1980);</P>
                <P>(10) Florin, Calif. 1968 (Photorevised 1980);</P>
                <P>(11) Elk Grove, Calif. 1968 (Photorevised 1979);</P>
                <P>(12) Sloughhouse, Calif. 1968 (Photorevised 1980, Minor Revision 1993);</P>
                <P>(13) Buffalo Creek, Calif. 1967 (Photorevised 1980);</P>
                <P>(14) Folsom SE, Calif. 1954 (Photorevised 1980);</P>
                <P>(15) Carbondale, Calif. 1968 (Photorevised 1980, Minor Revision 1993);</P>
                <P>(16) Goose Creek, Calif. 1968 (Photorevised 1980, Minor Revision 1993);</P>
                <P>(17) Clements, Calif. 1968 (Minor Revision 1993); and</P>
                <P>(18) Wallace, Calif. 1962.</P>
                <P>(c) <E T="03">Boundaries.</E> The Lodi viticultural area is located in California in the counties of Sacramento and San Joaquin. The beginning point is located at the intersection of the Calaveras River and the San Joaquin-Stanislaus County line (Valley Springs SW, Calif. map).</P>
                <P>(1) From the beginning point, proceed south along the San Joaquin-Stanislaus County line to its intersection with State Route 4, also known as Funck Road, T1N, R9E (Farmington, Calif. map);</P>
                <P>(2) Then proceed west on State Route 4 (west on Funck Road, then south on Waverly Road, then west through the village of Farmington on Farmington Road) to State Route 4's intersection with Jack Tone Road, T1N, R7E (beginning on the Farmington, Calif. map, passing through the Peters, CA map, and ending on the Stockton East, Calif. map);</P>
                <P>(3) Then proceed north along Jack Tone Road to its intersection with Eightmile Road, T3N, R7E (ending on the Waterloo, Calif. map);</P>
                <P>(4) Then proceed west along Eightmile Road to its intersection with Bishop Cut, T3N, R5E (beginning on the Waterloo, Calif. map, passing through the Lodi South, Calif. map, and ending on the Terminous, Calif. map);</P>
                <P>(5) Then proceed north along Bishop Cut to White Slough, T3N, R5E (Terminous, Calif. map);</P>

                <P>(6) Then proceed west along White Slough to an unnamed drainage canal on Terminous Tract, across the slough from a marked pumping station on King Island, T3N, R5E (Terminous, Calif. map);<PRTPAGE P="190"/>
                </P>
                <P>(7) Then proceed straight northwest on the Terminous Tract to the south end of Peatland Road and follow it north to its intersection with State Route 12, T3N, R5E (Terminous, Calif. map);</P>
                <P>(8) Then proceed west 0.2 mile on State Route 12 to its intersection with an unnamed unimproved road at BM-8, and continue straight northwest on the Terminous Tract to the marked siphon on the south side of Sycamore Slough, T3N, R5E (ending on the Thornton, Calif. map);</P>
                <P>(9) Then proceed in a straight line north-to-northeast across Brack Tract, Hog Slough and Canal Ranch to the line's intersection with Beaver Slough near the 90-degree east turn of an unnamed light duty road, west of a small cluster of buildings, T4N, R5E (Thornton, Calif. map);</P>
                <P>(10) Then proceed west along Beaver Slough to its intersection with the South Mokelumne River, following the river north and east to its intersection with Interstate 5 (marked as under construction), T5N, R5E ( ending on the Bruceville, Calif. map);</P>
                <P>(11) Then proceed northwest along Interstate 5 to its intersection with an unnamed road, locally known as Hood-Franklin Road.</P>
                <P>(12) From Interstate 5, proceed east on Hood-Franklin Road to its intersection with Franklin Boulevard, Section 17, T6N, R5E (ending on the Florin, Calif. map);</P>
                <P>(13) Proceed generally north along Franklin Boulevard to its intersection with Sims Road and a section line running due east marking the northern boundary of Section 28, T7N, R5E (Florin, Calif. map).</P>
                <P>(14) Follow this section line due east to its junction with Sheldon Road and then proceed east along Sheldon Road to its intersection with the Central California Traction Co. Railroad (beginning on the Florin, Calif. map and ending on the Elk Grove, Calif. map);</P>
                <P>(15) Proceed southeast along the Central California Traction Co. Railroad to its intersection with Grant Line Road (Elk Grove, Calif. map);</P>
                <P>(16) Then northeast along Grant Line Road to its intersection with State Highway 16 (beginning on the Elk Grove, Calif. map, passing through the Sloughhouse, Calif. map, and ending on the Buffalo Creek, Calif. map);</P>
                <P>(17) Proceed southeast along State Highway 16 to its intersection with Deer Creek (ending on the Sloughhouse, Calif. map);</P>
                <P>(18) Then proceed generally northeast along Deer Creek to its intersection with the eastern boundary of Sacramento County (beginning on the Sloughhouse, Calif. map, passing through the Buffalo Creek, Calif. map, and ending on the Folsom SE, Calif. map); and</P>
                <P>(19) Proceed generally south along the eastern boundary of Sacramento County to the meeting point of Sacramento, Amador, and San Joaquin Counties (beginning on the Folsom SE, Calif. map, passing through the Carbondale, Calif. map, and ending on the Goose Creek, Calif. map); and</P>
                <P>(20) Then proceed generally south-southeast along the eastern boundary of San Joaquin County to the point of beginning (beginning on the Goose Creek, Calif. map, passing through the Clements, Calif. and Wallace, Calif. maps, and ending on the Valley Springs SW, Calif. map).</P>
                <CITA>[T.D. ATF-223, 51 FR 5324, Feb. 13, 1986, as amended by T.D. ATF-482, 67 FR 56484, Sept. 4, 2002]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.108</SECTNO>
                <SUBJECT>Ozark Mountain.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Ozark Mountain.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of Ozark Mountain viticultural area are 11 U.S.G.S. maps in the scale of 1:250,000. They are titled—</P>
                <P>(1) St. Louis, Missouri (1963, revised 1969);</P>
                <P>(2) Jefferson City, Missouri (1955, revised 1970);</P>
                <P>(3) Springfield, Missouri (1954, revised 1969);</P>
                <P>(4) Joplin, Missouri; Kansas (1954, revised 1974);</P>
                <P>(5) Tulsa, Oklahoma; Arkansas; Missouri; Kansas (1958, revised 1973);</P>
                <P>(6) Fort Smith, Arkansas-Oklahoma (1978);</P>
                <P>(7) Russellville, Arkansas (compiled in 1954);</P>

                <P>(8) Memphis, Tennessee; Arkansas; Missouri (1953, revised 1978);<PRTPAGE P="191"/>
                </P>
                <P>(9) Poplar Bluff, Missouri; Arkansas (1957, revised 1978);</P>
                <P>(10) Paducah, Kentucky; Illinois; Missouri; Indiana (1949, revised 1969); and</P>
                <P>(11) Rolla, Missouri; Illinois (1954, revised 1969).</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Ozark Mountain viticultural area is located in Missouri, Oklahoma, and Arkansas. The starting point of the following boundary description is the point at which the Missouri River joins the Mississippi River north of St. Louis, Missouri (on the St. Louis map).</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) The boundary proceeds from the starting point westward along the Missouri River until it meets the Osage River;</P>
                <P>(ii) Then further westward along the Osage River (flowing through Lake of the Ozarks and the Harry S. Truman Reservoir) until it passes adjacent to Missouri Highway 82 in Osceola, Missouri (on the Jefferson City map);</P>
                <P>(iii) Then southwestward along Missouri Highway 82 until it intersects U.S. Highway 54 in Eldorado Springs, Missouri (on the Joplin map);</P>
                <P>(iv) Then westward along U.S. Highway 54 until it intersects U.S. Highway 71 near Nevada, Missouri;</P>
                <P>(v) Then southward along U.S. Highway 71 until it intersects Interstate Highway 44, approximately 5 miles south of Carthage, Missouri;</P>
                <P>(vi) Then westward and southwestward along Interstate Highway 44 into the State of Oklahoma, and continuing southwestward until Interstate Highway 44 crosses the Neosho River near Miami, Oklahoma (on the Tulsa map);</P>
                <P>(vii) Then southward along the Neosho River (flowing through the Lake of the Cherokees, Lake Hudson, and Fort Gibson Lake) until it flows into the Arkansas River, approximately 2 miles west of Fort Gibson, Oklahoma (on the Fort Smith map);</P>
                <P>(viii) Then southward and eastward along the Arkansas River (flowing through the Robert S. Kerr Lake) into the State of Arkansas, and continuing eastward until the Arkansas River is joined by Vache Grasse Creek, approximately 4 miles east of Barling, Arkansas;</P>
                <P>(ix) Then southeastward and southwestward following Vache Grasse Creek to the place where it is crossed by Arkansas Highway 10, near Greenwood, Arkansas;</P>
                <P>(x) Then westward along Highway 10 to U.S. Highway 71. Note: Highway 10 is the primary highway leading from Greenwood to Hackett, Arkansas;</P>
                <P>(xi) Then southward and eastward along Highway 71 until it crosses Rock Creek;</P>
                <P>(xii) Then northeastward along Rock Creek to Petit Jean Creek;</P>
                <P>(xiii) Then generally northeastward and eastward along Petit Jean Creek until it becomes the Petit Jean River (on the Russellville map);</P>
                <P>(xiv) Then generally eastward along the Petit Jean River, flowing through Blue Mountain Lake, until the Petit Jean River joins the Arkansas River;</P>
                <P>(xv) Then generally eastward along the Arkansas River to Cadron Creek;</P>
                <P>(xvi) Then northeastward and eastward along Cadron Creek, for about 2<FR>1/2</FR> miles, until it pases under U.S. Highway 64, approximately 3<FR>1/2</FR> miles west of Conway, Arkansas;</P>
                <P>(xvii) Then eastward along U.S. Highway 64 until it intersects U.S. Highway 67, near Beebe, Arkansas (on the Memphis map);</P>
                <P>(xviii) Then northeastward along U.S. Highway 67 into the state of Missouri, then northward until U.S. Highway 67 intersects U.S. Highway 60, in Poplar Bluff, Missouri (on the Poplar Bluff map);</P>
                <P>(xix) Then eastward along U.S. Highway 60 until it crosses the western boundary of Stoddard County. Note: Here that boundary is the St. Francis River;</P>
                <P>(xx) Then northward, northeastward, and eastward along the boundary of Stoddard County until it joins the southern boundary of Cape Girardeau County (on the Cape Girardeau map);</P>
                <P>(xxi) Then northeastward along the Cape Girardeau County boundary until it meets the Mississippi River south of Cape Girardeau, Missouri;</P>
                <P>(xxii) Then northward along the Mississippi River to the starting point.</P>
                <CITA>[T.D. ATF-231, 51 FR 24144, July 2, 1986; 51 FR 25366, July 14, 1986]</CITA>
              </SECTION>
              <SECTION>
                <PRTPAGE P="192"/>
                <SECTNO>§ 9.109</SECTNO>
                <SUBJECT>Northern Neck George Washington Birthplace.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Northern Neck George Washington Birthplace.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Northern Neck George Washington Birthplace viticultural area are 2 U.S.G.S. 1:250,000 scale maps. They are entitled:</P>
                <P>(1) Washington, DC; Maryland; Virginia, 1957 (Revised 1979); and</P>
                <P>(2) Richmond, VA; MD., 1973.</P>
                <P>(c) <E T="03">Boundaries.</E> The Northern Neck George Washington Birthplace viticultural area consists of all of the lands in the Counties of Westmoreland, King George, Northumberland, Lancaster and Richmond, in the Commonwealth of Virginia. The boundaries of the Northern Neck George Washington Birthplace viticultural area, using landmarks and points of reference found on the appropriate U.S.G.S. maps, are as follows:</P>
                <P>(1) Beginning on the Washington, DC; Maryland; Virginia U.S.G.S. map at a point on Potomac Creek where the King George County western boundary line at its northermost point intersects Potomac Creek the boundary proceeds easterly and southeasterly on the Richmond, VA; MD. U.S.G.S. map, along the Virginia shoreline of the Potomac River for approximately 66 miles to Smith Point on the Chesapeake Bay;</P>
                <P>(2) Thence southerly along the shoreline of the Chesapeake Bay for approximately 20 miles to Windmill Point at the mouth of the Rappahannock River;</P>
                <P>(3) Thence northwesterly along the banks of the Rappahannock River for approximately 72 air miles to Muddy Creek at the point where the western boundary line of King George County at its southernmost point begins;</P>
                <P>(4) Thence northward along the King George County/Stafford County line approximately 7 miles to the point of the beginning.</P>
                <CITA>[T.D. ATF-250, 52 FR 13082, Apr. 21, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.110</SECTNO>
                <SUBJECT>San Benito.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “San Benito.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of San Benito viticultural area are six U.S.G.S. maps. They are titled:</P>
                <P>(1) Hollister Quadrangle, 7.5 minute series, 1955 (photorevised 1971).</P>
                <P>(2) Tres Pinos Quadrangle, 7.5 minute series, 1955 (photorevised 1971).</P>
                <P>(3) Quien Sabe Valley Quadrangle, 7.5 minute series, 1968.</P>
                <P>(4) Mt. Harlan Quadrangle, 7.5 minute series, 1968.</P>
                <P>(5) Paicines Quadrangle, 7.5 minute series, 1968.</P>
                <P>(6) Cherry Peak Quadrangle, 7.5 minute series, 1968.</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The San Benito viticultural area is located in San Benito County, California. The starting point of the following boundary description is the point where the eastern border of Section 17 of Township 15 South, Range 7 East, crosses the latitude 36°37′30″ (on the Cherry Peak map).</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) From the starting point, westward along latitude 36°37′30″ to the Range Line R.6E./R.7E. (on the Paicines map).</P>
                <P>(ii) Then northward along that range line to the southern border of Section 1, Township 15 South, Range 6 East.</P>
                <P>(iii) Then westward along that southern border to the western border of the same section.</P>
                <P>(iv) Then northward along that western border to the 800-foot contour line.</P>
                <P>(v) Then northwestward along that contour line to the Township Line T.14S./T.15S.</P>
                <P>(vi) Then westward along that township line to the southern border of Section 34, Township 15 South, Range 6 East.</P>
                <P>(vii) Then continuing westward along that southern border to the 1200-foot contour line.</P>
                <P>(viii) Then generally northwestward along that contour line until it crosses for the second time the southern border of Section 28, Township 14 South, Range 6 East.</P>
                <P>(ix) Then westward along that southern border to the 1400-foot contour line.</P>

                <P>(x) Then following the 1400-foot contour line through the folloowing sections: Sections 28, 29, and 30, Township 14 South, Range 6 East; Section 25, <PRTPAGE P="193"/>Township 14 South, Range 5 East; Sections 30, 19, 20, and returning to 19, Township 14 South, Range 6 East; to the point where the 1400-foot contour line intersects the section line between Sections 19 and 18, Township 14 South, Range 6 East.</P>
                <P>(xi) From there in a straight line due northward to the 1200-foot contour line in Section 18, Township 14 South, Range 6 East.</P>
                <P>(xii) Then following the 1200-foot contour line generally northwestward to the northern border of Section 10, Township 14 South, Range 5 East (on the Mt. Harlan map).</P>
                <P>(xiii) Then following that northern border northwestward to the 1600-foot contour line.</P>
                <P>(xiv) Then following the 1600-foot contour line generally northward to an unimproved road.</P>
                <P>(xv) Then looping southward along the unimproved road and continuing eastward past the designated “Spring” and then northward parallel with Bonanza Gulch to the Vineyard School on Cienega Road (on the Hollister map).</P>
                <P>(xvi) From there in a straight line northeastward, crossing Bird Creek and the San Benito River, to the northwestern corner of Section 19, Township 13 South, Range 6 East (on the Tres Pinos map).</P>
                <P>(xvii) From there following the northern border of Sections 19 and 20, Township 13 South, Range 6 East, to the northeastern corner of Section 20.</P>
                <P>(xviii) From there in a straight line due eastward to the Range line R.6E./R7E.</P>
                <P>(xix) Then southward along that Range line to the Township line T.13S./T.14S.</P>
                <P>(xx) Then eastward along that Township line to the eastern border of Section 6, Township 14 South, Range 7 East (on the Quien Sabe Valley map).</P>
                <P>(xxi) Then southward along the eastern border of Sections 6, 7, and 18, Township 14 South, Range 7 East, to the northern border of Section 20, Township 14 South, Range 7 East (on the Cherry Peak map).</P>
                <P>(xxii) Then eastward along that northern border to the eastern border of Section 20.</P>
                <P>(xxiii) Then southward along the eastern border of Sections 20, 29, and 32, Township 14 South, Range 7 East, and continuing southward along the eastern border of Sections 5, 8, and 17, Township 15 South, Range 7 East, to the starting point.</P>
                <CITA>[T.D. ATF-258, 52 FR 37137, Oct. 5, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.111</SECTNO>
                <SUBJECT>Kanawha River Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Kanawha River Valley”.</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundary of the Kanawha River Valley viticultural area are 20 U.S.G.S. topographic maps in the 7.5-Minute series as follows:</P>
                <P>(1) Addison, Ohio—W. Va., dated 1960;</P>
                <P>(2) Gallipolis, Ohio—W. Va., dated 1958;</P>
                <P>(3) Apple Grove, Ohio—W. Va., dated 1968, photorevised 1975;</P>
                <P>(4) Glenwood, W. Va.—Ohio, dated 1968;</P>
                <P>(5) Milton, W. Va., dated 1972;</P>
                <P>(6) West Hamlin, W. Va., dated 1957;</P>
                <P>(7) Hamlin, W. Va., dated 1958;</P>
                <P>(8) Garrets Bend, W. Va., dated 1958;</P>
                <P>(9) Scott Depot, W. Va., dated 1958;</P>
                <P>(10) Saint Albans, W. Va., dated 1958;</P>
                <P>(11) Pocatalico, W. Va., dated 1958;</P>
                <P>(12) Sissonville, W. Va., dated 1958;</P>
                <P>(13) Romance, W. Va.,—Ky., dated 1957;</P>
                <P>(14) Kentuck, W. Va., dated 1957;</P>
                <P>(15) Kenna, W. Va., dated 1957;</P>
                <P>(16) Ripley, W. Va., dated 1960;</P>
                <P>(17) Cottageville, W. Va., dated 1960;</P>
                <P>(18) Mount Alto, W. Va.—Ohio, dated 1958, photorevised 1972;</P>
                <P>(19) Beech Hill, W. Va.—Ohio, dated 1957, photorevised 1975;</P>
                <P>(20) Cheshire, W. Va.—Ohio, dated 1968;</P>
                <P>(c) <E T="03">Boundary description.</E> The boundary description of the Kanawha River Valley viticultural area includes (in parentheses) the name of the map on which each described point is found. The boundary description is as follows:</P>
                <P>(1) The beginning point is the West Virginia-Ohio State Line at the confluence of Champaign Creek and the Ohio River. (Addison quadrangle)</P>

                <P>(2) The boundary follows the West Virginia-Ohio State Line, in the Ohio River (across the Gallipolis and Apple Grove quadrangles) southwesterly to the point at which the Mason County-<PRTPAGE P="194"/>Cabell County Line intersects the State Line. (Glenwood quadrangle)</P>
                <P>(3) The boundary proceeds in a straight line southerly to the benchmark at 583 ft. elevation in the town of Yates Crossing in Cabell County, WV. (Milton quadrangle)</P>
                <P>(4) The boundary proceeds in a straight line southeasterly to the benchmark at 640 ft. elevation in the town of Balls Gap, in Lincoln County, WV. (West Hamlin quadrangle)</P>
                <P>(5) The boundary proceeds in a straight line easterly (across the Hamlin, Garrett Bend, and Scott Depot quadrangles) to the benchmark at 590 ft. elevation in the town of Institute in Kanawha County, WV. (Saint Albans quadrangle)</P>
                <P>(6) The boundary proceeds in a straight line northeasterly to the benchmark at 654 ft. elevation in the town of Pocatalico, in Kanawha County, WV. (Pocatalico quadrangle)</P>
                <P>(7) The boundary proceeds in a straight line northeasterly (across the Sissonville quadrangle) to the confluence of Johns Branch and Sugar Creek in the town of Romance, in Jackson County, WV. (Romance quadrangle)</P>
                <P>(8) The boundary proceeds in a straight line northwesterly (across the Kentuck quadrangle) to the confluence of Plum Orchard Run and Stonelick Creek in the town of Plum Orchard, in Jackson County, WV. (Kenna quadrangle)</P>
                <P>(9) The boundary proceeds in a straight line northwesterly (across the Ripley quadrangle) to the Baltimore and Ohio Railroad crossing of State Highway 87 in the town of Evans, in Jackson County, WV. (Cottageville quadrangle)</P>
                <P>(10) The boundary proceeds in a straight line northwesterly (across the Mount Alto quadrangle) to the benchmark at 674 ft. elevation in the town of Flatrock, in Mason County, WV. (Beech Hill quadrangle)</P>
                <P>(11) The boundary proceeds northwesterly in a straight line (across the Cheshire quadrangle) to the beginning point.</P>
                <CITA>[T.D. ATF-226, 51 FR 11913, Apr. 8, 1986]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.112</SECTNO>
                <SUBJECT>Arkansas Mountain.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Arkansas Mountain.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Arkansas Mountain viticultural area are two U.S.G.S. maps, titled:</P>
                <P>(1) Russellville, Arkansas, 1:250,000 series compiled in 1954.</P>
                <P>(2) Fort Smith, Arkansas-Oklahoma, 1:250,000 series, 1978.</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Arkansas Mountain viticultural area is located in northwestern Arkansas. Starting at the point where Frog Bayou converges with the Arkansas River, near Yoestown, Arkansas (or the Fort Smith map), the boundary proceeds:</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) Southwestward along the Arkansas River to Vache Grasse Creek.</P>
                <P>(ii) Then southeastward and southwestward following Vache Grasse Creek to the place where it is crossed by Arkansas Highway 10, near Greenwood, Arkansas.</P>
                <P>(iii) From there westward along Highway 10 to U.S. Highway 71. (Note: Highway 10 is the primary highway leading to Greenwood to Hackett, Arkansas.)</P>
                <P>(iv) Then southward and eastward along Highway 71 until it crosses Rock Creek.</P>
                <P>(v) Then northeastward along Rock Creek to Petit Jean Creek.</P>
                <P>(vi) Then generally northeastward and eastward along Petit Jean Creek until it becomes the Petit Jean River (on the Russellville map).</P>
                <P>(vii) Then generally eastward along the Petit Jean River, flowing through Blue Mountain Lake, until the Petit Jean River joins the Arkansas River.</P>
                <P>(viii) Then generally eastward along the Arkansas River to Cadron Creek.</P>
                <P>(ix) Then generally northward and northeastward along Cadron Creek to the place where it is crossed by U.S. Highway 65.</P>
                <P>(x) From there northward along Highway 65 to its intersection with Arkansas Highway 16 near Clinton, Arkansas.</P>

                <P>(xi) From there following Highway 16 generally westward to its intersection with Arkansas Highway 23 in Brashears, Arkansas.<PRTPAGE P="195"/>
                </P>
                <P>(xii) From there southward along Highway 23 to the Madison County-Franklin County line.</P>
                <P>(xiii) Then westward and southward along that county line to the Madison County-Crawford County line.</P>
                <P>(xiv) Then westward along that county line to the Washington County-Crawford County line.</P>
                <P>(xv) Then westward along that county line to Jones Fork (on the Fort Smith map).</P>
                <P>(xvi) Then southward along Jones Fork until it joins Frog Bayou near Winfrey, Arkansas.</P>
                <P>(xvii) Then generally southward along Frog Bayou, flowing through Lake Shepherd Springs and Lake Fort Smith, to the starting point.</P>
                <CITA>[T.D. ATF-235, 51 FR 34205, Sept. 26, 1986]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.113</SECTNO>
                <SUBJECT>North Fork of Long Island.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “North Fork of Long Island.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the “North Fork of Long Island” viticultural area are 5 U.S.G.S. maps. They are entitled:</P>
                <P>(1) Wading River, N.Y., 7.5 minute series, scaled at 1:24,000 edition of 1967.</P>
                <P>(2) Riverhead, N.Y., 7.5 minute series, scaled at 1:24,000, edition of 1956.</P>
                <P>(3) New York, N.Y.; N.J.; Conn., U.S., 1:250,000 series, scaled at 1:250,000, edition of 1960, revised 1979.</P>
                <P>(4) Providence, R.I.; Mass.; Conn., N.Y., U.S., 1:250,000 series, scaled at 1:250,000, edition of 1947, revised 1969.</P>
                <P>(5) Hartford, Conn.; N.Y.; N.J.; Mass., U.S., 1:250,000 series, scaled at 1,250,000, edition of 1962, revised 1975.</P>
                <P>(c) <E T="03">Boundaries.</E> The boundaries of the proposed viticultural area are as follows: The North Fork of Long Island viticultural area is located entirely within eastern Suffolk County, Long Island, New York. The viticultural area boundaries consist of all of the land areas of the North Fork of Long Island, New York, including all of the mainland, shorelines and islands in the Townships of Riverhead, Shelter Island, and Southold.</P>
                <P>(1) The point of beginning is on the Wading River, N.Y., 7.5 minute series, U.S.G.S. map at the northern boundary of the Brookhaven/Riverhead Township line on the Long Island Sound (approximately 500 feet east of the mouth of the Wading River);</P>
                <P>(2) The boundary goes south on the Brookhaven/Riverhead Town line for approximately 6.5 miles until it meets the Peconic River approximately 1 mile east of U.S. Reservation Brookhaven National Laboratory;</P>
                <P>(3) Then the boundary travels east on the Peconic River (Brookhaven/Riverhead Town line) for 2.7 miles until it meets the Riverhead/Southampton Township line on the Riverhead, N.Y., U.S.G.S. map;</P>
                <P>(4) It then goes east on the Riverhead/Southampton Township line for 4.2 miles until it reaches an area where the Peconic River widens north of Flanders;</P>
                <P>(5) Then the boundary proceeds east to Orient Point then west along the shoreline, beaches, islands, and mainland areas of the North Fork of Long Island, described on the “New York”, “Providence” and “Hartford” U.S.G.S. maps until it reaches the Brookhaven/Riverhead Township line at the point of beginning. These boundaries consist of all the land (and isolated islands including without limitation, Wicopesset Island, Robins Island, Fishers Island, Great Gull Island, Plum Island, and Shelter Island) in the Townships of Riverhead, Shelter Island, and Southold.</P>
                <CITA>[T.D. ATF-240, 51 FR 36398, Oct. 10, 1986]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.114</SECTNO>
                <SUBJECT>Old Mission Peninsula.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Old Mission Peninsula.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the “Old Mission Peninsula” viticultural area are 2 U.S.G.S. Quadrangle (15 Minute Series) maps, scaled at 1:62,500. They are entitled:</P>
                <P>(1) Elk Rapids, Mich. (1957); and</P>
                <P>(2) Traverse City, Mich. (1957).</P>
                <P>(c) <E T="03">Boundary.</E> The boundary in Grand Traverse County, Michigan, consists of all of Peninsula Township, excluding Marion and Bassett Islands. In addition, the viticultural area takes in a small portion of Traverse City Township.</P>

                <P>(1) The beginning point is on the Traverse City, Mich., U.S.G.S. map at the <PRTPAGE P="196"/>shoreline of the West Arm of Grand Traverse Bay at Section 1, Township 27 North, Range 11 West (T27N, R11W), approximately 500 feet due west of the intersection of two unmarked light-duty roads (approx. 750 feet north of Bryant Park);</P>
                <P>(2) The boundary proceeds north 19 miles along the western shoreline of the Old Mission Peninsula until it reaches the lighthouse near Old Mission Point at the north side of the Peninsula on the Elk Rapids, Mich., U.S.G.S. map, Sec. 23, T30N, R10W;</P>
                <P>(3) It then proceeds south for approximately 19 miles along the eastern shoreline of the peninsula to the southeast portion of an unmarked light-duty road (known locally as Eastern Avenue) at Sec. 6, T27N, R10W on the Traverse City, Mich., U.S.G.S. map. The unmarked light-duty road is located immediately north of Northwestern Michigan College on the shoreline of the East Arm of the Grand Traverse Bay;</P>
                <P>(4) The boundary travels west along the unmarked light-duty road (known locally as Eastern Avenue) for approximately one mile until it meets an unmarked north/south light-duty road at Sec. 1, T27N, R11W; and</P>
                <P>(5) Finally, the boundary proceeds due east 500 feet to the beginning point on the shoreline of the West Arm of the Grand Traverse Bay at Sec. 1, T27N, R11W.</P>
                <CITA>[T.D. ATF-252, 52 FR 21515, June 8, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.115</SECTNO>
                <SUBJECT>Ozark Highlands.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Ozark Highlands.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Ozark Highlands viticultural area are three U.S.G.S. maps of the 1:250,000 series. They are titled:</P>
                <P>(1) Rolla, Missouri; Illinois, 1954 (revised 1969).</P>
                <P>(2) St. Louis, Missouri; Illinois, 1963 (revised 1969).</P>
                <P>(3) Springfield, Missouri, 1954 (revised 1969).</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Ozark Highlands viticultural area is located in south central Missouri. The area comprises portions of the following counties: Phelps, Maries, Osage, Gasconade, Franklin, Crawford, Texas, Shannon, Dent, Reynolds, and Pulaski. The beginning point of the following boundary description is the junction of Little Piney Creek and the Gasconade River, near Jerome, Missouri (in the northwest corner of the Rolla map).</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) From the beginning point, the boundary goes northward along the Gasconade River to the latitude line 38°00′ (the dividing line between the Rolla and St. Louis maps);</P>
                <P>(ii) Then eastward along that latitude line to U.S. Highway 63;</P>
                <P>(iii) Then northward along U.S. 63 to Spring Creek;</P>
                <P>(iv) Then north-northwestward along Spring Creek to the Gasconade River;</P>
                <P>(v) Then northward along the Gasconade River to a power transmission line (less than 1 mile north of Buck Elk Creek);</P>
                <P>(vi) Then eastward and east-northeastward along that power transmission line to Missouri Route 19;</P>
                <P>(vii) Then southward along Route 19 to the Bourbeuse River;</P>
                <P>(viii) Then east-northeastward along the Bourbeuse River to the range line dividing R. 2 W. and R. 1 W.;</P>
                <P>(ix) Then southward along that range line to the Meramec River;</P>
                <P>(x) Then southwestward along the Meramec River to Huzzah Creek;</P>
                <P>(xi) Then southward along Huzzah Creek to Dry Creek (on the Rolla map, where Missouri Route 8 crosses Huzzah Creek);</P>
                <P>(xii) Then southward along Dry Creek to Cherry Valley Creek;</P>
                <P>(xiii) Then south-southwestward along Cherry Valley Creek to Missouri Route 19;</P>
                <P>(xiv) Then southward and southwestward along Route 19 to Crooked Creek;</P>
                <P>(xv) Then northwestward along Crooked Creek to the Meramec River;</P>
                <P>(xvi) Then southward along the Meramec River to Hutchins Creek;</P>
                <P>(xvii) The southeastward along Hutchins Creek to its source near Missouri Route 32, across from the Howes Mill Post Office;</P>
                <P>(xviii) Then in a straight line toward the Howes Mill Post Office to Route 32;</P>

                <P>(xix) Then eastward along Route 32 to the range line dividing R. 3 W. and R. 2 W.;<PRTPAGE P="197"/>
                </P>
                <P>(xx) Then southward along that range line to the township line dividing T. 33 N. and T. 32 N.;</P>
                <P>(xxi) Then westward along that township line (which coincides, in R. 3 W., with the Reynolds County/Dent County line) to the boundary of Clark National Forest;</P>
                <P>(xxii) Then generally southward along that national forest boundary to the Dent County/Shannon County line;</P>
                <P>(xxiii) Then westward along that county line to the Current River;</P>
                <P>(xxiv) Then southeastward along the Current River to Missouri Route 19;</P>
                <P>(xxv) Then southward along Route 19 to Jack's Fork;</P>
                <P>(xxvi) Then westward, southwestward and northwestward along Jack's Fork, taking the North Prong, to its northwesternmost source;</P>
                <P>(xxvii) Then in a straight line northwestward to the southeasternmost source of Hog Creek;</P>
                <P>(xxviii) Then northwestward along Hog Creek to the Big Piney River (on the Springfield map);</P>
                <P>(xxix) Then northward along the Big Piney River to the township line dividing T. 35 N. and T. 36 N.;</P>
                <P>(xxx) Then eastward along that township line to Little Piney Creek (on the Rolla map);</P>
                <P>(xxxi) Then northward and westward along Little Piney Creek to the beginning point.</P>
                <CITA>[T.D. ATF-256, 52 FR 32785, Aug. 31, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.116</SECTNO>
                <SUBJECT>Sonoma Coast.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Sonoma Coast”.</P>
                <P>(b) <E T="03">Approved map.</E> The approved maps for determining the boundary of the Sonoma Coast viticultural area are the following six U.S.G.S. topographic maps:</P>
                <P>(1) Sonoma County, California, scale 1:100,000, dated 1970;</P>
                <P>(2) Mark West Springs, California, 7.5-minute series, dated 1958, photoinspected 1978;</P>
                <P>(3) Healdsburg, California, 7.5-minute series, dated 1955, photorevised 1980;</P>
                <P>(4) Jimtown, California, 7.5-minute series, dated 1955, photorevised 1975;</P>
                <P>(5) Guerneville, California, 7.5-minute series, dated 1955; and</P>
                <P>(6) Cazadero, California, 7.5-minute series, dated 1978.</P>
                <P>(c) <E T="03">Boundary description.</E> In general, the boundary description of the Sonoma Coast viticultural area is found on the U.S.G.S. Topographic Map of Sonoma County, California, scale 1:100,000, dated 1970. When a point of the boundary description is found on one of the 7.5-minute quadrangles, the boundary description indicates this in parentheses. The boundary description is as follows:</P>
                <P>(1) The beginning point is the point at which the Sonoma County-Mendocino County line meets the shoreline of the Pacific Ocean.</P>
                <P>(2) The boundary follows the shoreline of the Pacific Ocean southerly to the Sonoma County-Marin County line.</P>
                <P>(3) The boundary follows the Sonoma County-Marin County line southeasterly to San Pablo Bay.</P>
                <P>(4) The boundary follows the shoreline of San Pablo Bay easterly to the Sonoma County-Napa County line.</P>
                <P>(5) The boundary follows the Sonoma County-Napa County line northerly to the peak of Arrowhead Mountain.</P>
                <P>(6) From the peak of Arrowhead Mountain, the boundary proceeds in a straight line westerly to the peak of Sonoma Mountain.</P>
                <P>(7) From the peak of Sonoma Mountain, the boundary proceeds in a straight line northwesterly to the peak of Taylor Mountain.</P>
                <P>(8) From the peak of Taylor Mountain, the boundary proceeds in a straight line northwesterly to the point, near the benchmark at 184 ft. elevation in Section 34, Township 8 North, Range 8 West, at which Mark West Road crosses an unnamed stream which flows northwesterly into Mark West Creek. (Mark West Springs map)</P>
                <P>(9) From this point, the boundary proceeds northerly in a straight line to the headwaters of Brooks Creek, in Section 4, Township 8 North, Range 8 West. (Mark West Springs map)</P>
                <P>(10) The boundary follows Brooks Creek northwesterly to its confluence with the Russian River. (Healdsburg map)</P>

                <P>(11) The boundary proceeds southwesterly in a straight line to an unidentified peak at elevation 672 ft. (Healdsburg map)<PRTPAGE P="198"/>
                </P>
                <P>(12) The boundary proceeds northwesterly in a straight line to the peak identified as Black Peak. (Healdsburg map)</P>
                <P>(13) The boundary proceeds westerly in a straight line to an unidentified peak at elevation 857 ft. (Healdsburg map)</P>
                <P>(14) The boundary proceeds westerly in a straight line to the peak of Fitch Mountain at elevation 991 ft. (Healdsburg map)</P>
                <P>(15) The boundary proceeds northwesterly in a straight line to the intersection, near a benchmark at elevation 154 ft. in the town of Chiquita, of a light-duty road (known locally as Chiquita Road) and a southbound primary highway, hard surface road (known locally as Healdsburg Avenue). (Jimtown map)</P>
                <P>(16) The boundary follows that road (known locally as Healdsburg Avenue) southerly through the city of Healdsburg to the point at which it is a light-duty, hard or improved surface road, identified on the map as Redwood Highway, which crosses the Russian River, immediately south of the city of Healdsburg at a bridge (known locally as the Healdsburg Avenue Bridge). (Healdsburg map)</P>
                <P>(17) The boundary follows the Russian River southerly to a point, near the confluence with Dry Creek, opposite a straight line extension of a light-duty, hard or improved surface road (known locally as Foreman Lane) located west of the Russian River. (Healdsburg map)</P>
                <P>(18) The boundary proceeds in a straight line to that road and follows it westerly, then south, then westerly, onto the Guerneville map, across a secondary highway, hard surface road (known locally as Westside Road), and continues westerly, then northwesterly to the point at which it crosses Felta Creek. (Guerneville map)</P>
                <P>(19) The boundary follows Felta Creek approximately 18,000 ft. westerly to its headwaters, at the confluence of three springs, located approximately 5,800 feet northwesterly of Wild Hog Hill. (Guerneville map)</P>
                <P>(20) The boundary proceeds in a straight line southwesterly to the southwest corner of Section 9, Township 8 North, Range 10 West. (Guerneville map)</P>
                <P>(21) The boundary proceeds in a straight line southwesterly to the point in, Section 24, Township 8 North, Range 11 West, at which Hulbert Creek crosses the 160 ft. contour line. (Cazadero map)</P>
                <P>(22) The boundary follows Hulbert Creek southerly to its confluence with the Russian River.</P>
                <P>(23) The boundary follows the Russian River southwesterly to its confluence with Austin Creek.</P>
                <P>(24) From this point, the boundary proceeds in a straight line northwesterly to the peak of Pole Mountain.</P>
                <P>(25) From the peak of Pole Mountain, the boundary proceeds in a straight line northwesterly to the peak of Big Oat Mountain.</P>
                <P>(26) From the peak of Big Oat Mountain, the boundary proceeds in a straight line northwesterly to the peak of Oak Mountain.</P>
                <P>(27) From the peak of Oak Mountain, the boundary proceeds in a straight line northwesterly approximately 14.5 miles to the Sonoma County-Mendocino County line at the northeast corner of Section 25, Township 11 North, Range 14 West.</P>
                <P>(28) The boundary follows the Sonoma County-Mendocino County line west, then southwesterly to the beginning point.</P>
                <CITA>[T.D. ATF-253, 52 FR 22304, June 11, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.117</SECTNO>
                <SUBJECT>Stags Leap District.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Stags Leap District.”</P>
                <P>(b) <E T="03">Approved map.</E> The appropriate map for determining the boundaries of the Stags Leap District viticultural area is one U.S.G.S. topographic map in the 7.5 minute series, scaled 1:24000, titled “Yountville, Calif.,” 1951 (photorevised 1968).</P>
                <P>(c) <E T="03">Boundaries.</E> The Stags Leap District viticultural area is located in Napa County, California, within the Napa Valley viticultural area. The boundaries are as follows:</P>

                <P>(1) Commencing at the intersection of the intermittent stream (drainage creek) with the Silverado Trail at the <PRTPAGE P="199"/>60 foot contour line in T6N/R4W, approximately 7 miles north of the city of Napa.</P>
                <P>(2) Then southwest in a straight line, approximately 900 feet, to the main channel of the Napa River.</P>
                <P>(3) Then following the main branch of the Napa River (not the southern branch by the levee) in a northwesterly then northerly direction, until it intersects the medium-duty road (Grant Bdy) in T7N/R4W, known locally as the Yountville Cross Road.</P>
                <P>(4) Then northeast along the Yountville Cross Road until it intersects the medium-duty road, the Silverado Trail.</P>
                <P>(5) Then north along the Silverado Trail approximately 590 feet to a gully entering the Silverado Trail from the east.</P>
                <P>(6) Then northeast along the center line of that gully, approximately 800 feet, until it intersects the 400 foor contour line in Section 30 of T7N/R4W.</P>
                <P>(7) Then in a generally southeast direction, following the 400 foot contour line through Sections 29, 32, 33, 4, and 3, until it intersects the intermittent stream in the southwest corner of Section 3 in T6N/R4W.</P>
                <P>(8) Then in a generally southwest direction along that intermittent stream to the beginning point, at the intersection with the Silverado Trail.</P>
                <CITA>[T.D. ATF-281, 54 FR 4018, Jan. 27, 1989]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.118</SECTNO>
                <SUBJECT>Ben Lomond Mountain.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Ben Lomond Mountain.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Ben Lomond Mountain viticultural area are four 7.5 minute series U.S.G.S. maps. They are titled:</P>
                <P>(1) Davenport Quadrangle (1955, photorevised 1968);</P>
                <P>(2) Big Basin Quadrangle (1955, photorevised 1973);</P>
                <P>(3) Felton Quadrangle (1955, photorevised 1980); and</P>
                <P>(4) Santa Cruz Quadrangle (1954, photorevised 1981).</P>
                <P>(c) <E T="03">Boundaries.</E> The Ben Lomond Mountain viticultural area is located entirely within Santa Cruz County, California, which is in the central part of the State near the coast. The beginning point is the intersection of sections 25, 26, 35 and 36 (Davenport Quadrangle, T. 10S., R. 3W.) which coincides with the 800-foot contour line and is approximately .6 mile northwest of the top of Bald Mountain.</P>
                <P>(1) From the beginning point, the boundary follows the 800-foot contour line in a meandering manner in a generally northwesterly direction across section 26 into section 27 (T. 10S., R. 3W.).</P>
                <P>(2) Thence along the 800-foot contour line in an easterly and then generally a northeasterly direction through section 27 and then back across the northwest corner of section 26 and thence in a generally northwesterly direction along the 800-foot contour line across sections 23, 22 and into section 15.</P>
                <P>(3) Thence along the 800-foot contour line in a northerly and then a southerly direction across section 22 and eventually in a generally northwesterly direction into section 20.</P>
                <P>(4) Thence continuing along the 800-foot contour line in a generally northwesterly direction through sections 20, 17, 16, 17, 16, 9, 8, 5, 8, 7 and 6 (T. 10S., R. 3W.).</P>
                <P>(5) Thence continuing in a northerly direction across sections 5 and 32 and thence in a southwesterly direction across sections 31 and 6.</P>
                <P>(6) Thence continuing in a generally northerly direction across sections 1, 6, 31, 36, 31, 36 and 30 (T. 9S., R. 3W.) to the intersection of the 800-foot contour line and Scott Creek in section 19 (T. 9S., R. 3W.).</P>
                <P>(7) Thence in a northeasterly direction along the south bank of Scott Creek through sections 19, 20 and 17 to the intersection of Scott Creek with the 1600-foot contour line in section 16 (T. 9S., R. 3W.).</P>
                <P>(8) Thence in a generally northeasterly and then southerly direction along the 1600-foot contour line through section 16 and then through the southeast and southwest corners of sections 9 and 10 respectively to the intersection of the 1600-foot contour line with Jamison Creek in section 16 (T. 9S., R. 3W.).</P>

                <P>(9) Thence in an easterly direction along the south bank of Jamison Creek across sections 15 and 14 (T. 9S., R. 3W.) to the intersection of Jamison Creek and the 800-foot contour line in the <PRTPAGE P="200"/>southeast corner of section 14 (T. 9S., R. 3W.).</P>
                <P>(10) Thence in a southeasterly direction in a meandering manner along the 800-foot contour line across sections 14, 23, 24, 25 (T. 9S., R. 3W.), sections 30 and 31 (T. 9S., R. 2W.), and sections 32, 5, 8, 9, 16, 17 and 21 (T. 10S., R. 2W.).</P>
                <P>(11) Thence in a southwesterly, then generally a southeasterly and then a northwesterly direction along the 800-foot contour line in a meandering manner to section 31 and then continuing on through sections 31 and 30 (T. 10S., R. 2W.).</P>
                <P>(12) Thence continuing along the 800-foot contour line in a generally southerly and then a generally northwesterly direction through sections 25, 36, 31 and 36 to the point of beginning at the intersection of sections 25, 26, 35 and 36 (T. 10S., R. 3W.).</P>
                <CITA>[T.D. ATF-264, 52 FR 46591, Dec. 9, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.119</SECTNO>
                <SUBJECT>Middle Rio Grande Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Middle Rio Grande Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The approved maps for determining the boundaries of the “Middle Rio Grande Valley” viticultural area are 24 U.S.G.S. Quadrangle (7.5 Minute Series) maps and 1 (15 Minute Series) U.S.G.S. map. They are titled:</P>
                <P>(1) Abeytas, N. Mex. (1952), revised 1979.</P>
                <P>(2) Alameda, N. Mex. (1960), revised 1967 and 1972.</P>
                <P>(3) Alburquerque East, N. Mex. (1960), revised 1967 and 1972.</P>
                <P>(4) Albuquerque West, N. Mex. (1960), revised 1967 and 1972.</P>
                <P>(5) Belen, N. Mex. (1952), revised 1971.</P>
                <P>(6) Bernalillo, N. Mex. (1954), revised 1972.</P>
                <P>(7) Dalies, N. Mex. (1952), revised 1971.</P>
                <P>(8) Isleta, N. Mex. (1952), revised 1967 and 1974.</P>
                <P>(9) La Joya, N. Mex. (1952), revised 1971.</P>
                <P>(10) Lemitar, N. Mex. (1952), revised 1971.</P>
                <P>(11) Loma De Las Canas, N. Mex. (1959), revised 1979.</P>
                <P>(12) Loma Machete, N. Mex. (1954), revised 1972.</P>
                <P>(13) Los Griegos, N. Mex. (1960), revised 1967 and 1972.</P>
                <P>(14) Los Lunas, N. Mex. (1952), revised 1971 and 1974.</P>
                <P>(15) Mesa Del Yeso, N. Mex. (1959).</P>
                <P>(16) Placitas, N. Mex. (1954).</P>
                <P>(17) San Acacia, N. Mex. (1952), revised 1971.</P>
                <P>(18) San Antonio, N. Mex. (1948)—15 minute series.</P>
                <P>(19) San Felipe Pueblo, N. Mex. (1954), revised 1978.</P>
                <P>(20) Santa Ana Pueblo, N. Mex. (1954), revised 1978.</P>
                <P>(21) Socorro, N. Mex. (1959), revised 1971.</P>
                <P>(22) Tome, N. Mex. (1952), revised 1979.</P>
                <P>(23) Turn, N. Mex. (1952), revised 1979.</P>
                <P>(24) Veguita, N. Mex. (1952), revised 1979.</P>
                <P>(25) Wind Mesa, N. Mex. (1952), revised 1967.</P>
                <P>(c) <E T="03">Boundary description.</E> The boundary of the proposed Middle Rio Grande Valley viticultural area is as follows:</P>
                <P>(1) The beginning point is at the transmission line tower in the middle of Section 34, T14N, R4E of the Santa Ana Pueblo, N. Mex. U.S.G.S. map;</P>
                <P>(2) The boundary follows the power transmission line east for 2.5 miles until it converges with New Mexico State Route 25/Interstate 85 (now known as Interstate 25) at Sec. 1, T13N, R4E on the San Felipe Pueblo, M. Mex. U.S.G.S. map;</P>
                <P>(3) It follows I-25 southwest for 1.2 miles until it arrives at an unimproved dirt road approx. .2 mile east of Algodones Cemetery, at Sec. 11, T13N, R4E on the Placitas, N. Mex. U.S.G.S. map;</P>
                <P>(4) The boundary follows the unimproved dirt road southeast for 5.5 miles until it meets another unimproved dirt road at Tecolote, NM, south of Sec. 27 and 28, T13N, R5E;</P>
                <P>(5) It travels southwest on the unimproved dirt road .7 mile until it meets NM-44 approx. 100 feet northwest of BM 6,075 in Placitas, NM, at T13N, R5E;</P>
                <P>(6) It then goes southeast on NM-44 for approx. 250 feet until it intersects the 6,100 foot elevation contour line approx. 250 feet southeast of BM 6,075, at T13N, R5E;</P>

                <P>(7) It then travels west for 3.5 miles on the 6,100 feet elevation contour line until it reaches a light-duty road on the Huertas Grant/Cibola National Forest Boundary at Sec. 6, T12N, R5E;<PRTPAGE P="201"/>
                </P>
                <P>(8) The boundary runs north to northwest on the light-duty road for approx. .9 mile until it meets NM-44 next to BM 5,875 in Sec. 31, T13N, R5E;</P>
                <P>(9) It travels west 5.2 miles on NM-44 until it arrives at I-25 (southbound interchange) near the Bernalillo Cemetery at T13N, R4E on the Bernalillo, N. Mex. U.S.G.S. map;</P>
                <P>(10) It proceeds south on I-25 for approx. 8.6 miles until it intersects with NM-556 at the east bound interchange at Sec. 1, T11N, R3E on the Alameda, N. Mex. U.S.G.S. map;</P>
                <P>(11) The boundary goes east approx. 5 miles on NM-556 until it intersects the 106°30′ longitude meridian, T11N, R4E;</P>
                <P>(12) Then it goes south on the 106°30′ longitude meridian for approx. 4.5 miles until it arrives at Montgomery Blvd. at Sec. 34, T10/11N, R4E;</P>
                <P>(13) The boundary travels west on Montgomery Blvd. for approx. 6.1 miles until it meets the south exit ramp of 1-25 in Sec. 34, T11N, R3E;</P>
                <P>(14) Then it travels south on I-25 for approx. 13.3 miles (through Albuquerque, NM) until it intersects with NM-47 at Sec. 6, T8N, R3E on the Isleta, N. Mex. U.S.G.S. map;</P>
                <P>(15) It heads south on NM-47 for approx. 3.2 miles until it converges with the 4,900 foot elevation contour line at Isleta Pueblo, NM, in Sec. 24, T8N, R2E;</P>
                <P>(16) The boundary follows the 4,900 foot elevation contour line south for approx. 25 miles until it arrives at a point north on Madron, NM, at the Atchison, Topeka and Santa Fe Railroad (AT&amp;SF RR) tracks, approx. 250 feet east of elevation mark 4,889 feet on the Turn, N. Mex. U.S.G.S. map;</P>
                <P>(17) It then travels north on the AT&amp;SF RR tracks for approx. 350 feet until it intersects NM-47 approx. 350 feet north of elevation mark 4,889 feet;</P>
                <P>(18) The boundary goes southwest on NM-47 (through Turn, N.M.) for approx. 2.4 miles until it reaches the 106°45′ longitude meridian between the Turn, N. Mex. &amp; Vequita, N. Mex. U.S.G.S. maps;</P>
                <P>(19) Then it travels south on the 106°45′ longitude meridian for approx. 4.7 miles until it meets the 34°30′ latitude parallel on the Veguita, N. Mex. U.S.G.S. map;</P>
                <P>(20) It then proceeds west on the 34°30′ latitude parallel for approx. 1 mile until it arrives at NM-47 approx. .75 mile south of San Juan Church;</P>
                <P>(21) Then it moves south on NM-47 for approx. 13.2 miles until it reaches an improved light-duty road at La Joya, NM, approx. 500 feet west of La Joya Cemetery on the La Joya, N. Mex. U.S.G.S. map;</P>
                <P>(22) It then travels south on the improved light-duty road for approx. 450 feet until it intersects another improved light-duty road;</P>
                <P>(23) Then it goes 500 feet west on the improved light-duty road until it reaches a north-south unimproved road at a point approx. .9 mile east of the AT&amp;SF RR tracks;</P>
                <P>(24) The boundary heads south on the unimproved road for approx. 7.9 miles until it reaches the 34°15′ latitude parallel on the La Joya, N. Mex. U.S.G.S. map;</P>
                <P>(25) It travels west on the 34°15′ latitude parallel for approx. .9 mile until it intersects the 106°52′30′ longitude meridian on the Mesa Del Yeso, N. Mex. U.S.G.S. map;</P>
                <P>(26) It then goes south on the 106°52′30″ longitude meridian for approx. 3.3 miles until it intersects the south section line of Sec. 19, T1S, R1E;</P>
                <P>(27) It then runs east for approx. 1.25 miles until it reaches the east section line (marked altitude 5,058 feet) of Sec. 20, T1S, R1E;</P>
                <P>(28) It travels south on the section line for approx. 7.1 miles, until it meets the Grant Boundary at altitude mark 4,734 feet at Sec. 32/33, T2S, R1E on the Loma De Las Canas, N. Mex. U.S.G.S. map;</P>
                <P>(29) It proceeds east on the Grant Boundary for .25 mile until it arrives at the section line (Grant Boundary at Sec. 32/33, T2S, R1E;</P>
                <P>(30) The boundary moves south on the Grant Boundary for approx. 5.2 miles until it meets the (Grant Boundary) section line near altitude spot 4,702 feet at Sec. 28/29, T3S, R1E;</P>
                <P>(31) The boundary goes west on the section line (Grant Boundary) for approx. .25 mile until it arrives at the section line at Sec. 28/29, T3S, R1E;</P>

                <P>(32) Then it moves south on the section line for approx. 5.7 miles until it meets an unimproved dirt road at <PRTPAGE P="202"/>Bosquecito, N.M. on the west section line of Sec. 9, T4S, R1E on the San Antonio, N. Mex. (15 minute series) U.S.G.S. map;</P>
                <P>(33) It heads south on the unimproved dirt road for approx. 2 miles until it changes to a light-duty road at Padilla Ranch in Sec. 21, T4S, R1E;</P>
                <P>(34) It follows the light-duty road for 2.25 miles until it intersects US-380/85, in Sec. 33, T4S, R1E;</P>
                <P>(35) Then it follows US-380/85, first west then it loops north for approx. 8 miles until it meets the 34°00′ latitude parallel;</P>
                <P>(36) The boundary moves west on the 34°00′ latitude parallel of the Socorro, N. Mex. U.S.G.S. map for approx. .75 mile until it meets the 4,800 foot elevation contour line in Sec. 35;</P>
                <P>(37) It meanders north on the 4,800 foot elevation contour line for approx. 9 miles until it meets the 34°07′30″ latitude parallel;</P>
                <P>(38) It travels east for approx. .2 mile on the 34°07′30″ latitude parallel until it meets I-25 (US-60/85);</P>
                <P>(39) It goes north on I-25 (US-60/85) for approx 27.8 miles until it meets the Belen Highline Canal levee approx. 1.6 mile south of San Antonio Church on the Veguita, N. Mex. U.S.G.S. map;</P>
                <P>(40) Then the boundary follows the Belen Highline Canal north for approx. 9.4 miles until it intersects I-25, approx. .5 mile west of Bacaville, NM, on the Belen, N. Mex. U.S.G.S. map;</P>
                <P>(41) Then it travels north on I-25 for approx. 16 miles until it meets the 34°52′30″ latitude parallel on the Isleta, N. Mex. U.S.G.S. map;</P>
                <P>(42) The boundary goes west on the 34°52 30″ latitude parallel for approx. 1 mile until it arrives at the 106°45′ longitude meridian;</P>
                <P>(43) Then it moves north on the 106°45′ longitude meridian for approx. 16.5 miles until it reaches the 35°07′30″ longitude meridian on the Albuquerque West, N. Mex. U.S.G.S. map;</P>
                <P>(44) At this point it heads east for approx. 1.2 miles along the 35°07′ 30″ latitude parallel until it reaches the power transmission line towers at Sec. 3/4, T10N, R2E of the Los Griegos, N. Mex. U.S.G.S. map; and finally</P>
                <P>(45) From there it follows the power transmission line towers (and for 1 mile along a connecting unimproved road) north and northeast for a total of approx. 24.4 miles to the point of beginning at Sec. 34, T14N, R4E, of the Santa Ana Pueblo, N. Mex. U.S.G.S. map.</P>
                <CITA>[T.D. ATF-266, 52 FR 2836, Feb. 2, 1988]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.120</SECTNO>
                <SUBJECT>Sierra Foothills.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Sierra Foothills.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Sierra Foothills viticultural area are four U.S.G.S. topographical maps of the 1:250,000 scale:</P>
                <P>(1) “Chico” (NJ 10-3), edition of 1958, revised 1970.</P>
                <P>(2) “Sacramento” (NJ 10-6), edition of 1957 revised 1970.</P>
                <P>(3) “San Jose” (NJ 10-9), edition of 1962, revised 1969.</P>
                <P>(4) “Mariposa” (NJ 11-7), edition of 1957, revised 1970.</P>
                <P>(c) <E T="03">Boundary.</E> The Sierra Foothills viticultural area is located in portions of the counties of Yuba, Nevada, Placer, El Dorado, Amador, Calaveras, Tuolumne and Mariposa, in the State of California. The boundary is as follows:</P>
                <P>(1) Beginning on the “Chico” map at the point of intersection of the north border of T(ownship) 18 N(orth), R(ange) 6 E(ast), with S. Honcut Creek the boundary proceeds approximately 3.5 miles, in a generally south and southwesterly direction, along the eastern bank of S. Honcut Creek to the point where S. Honcut Creek meets the western border of T. 18 N., R. 6 E.;</P>
                <P>(2) Then south, approximately 15 miles, along the western borders of T. 18 N., T. 17 N., and T. 16 N. in R. 6 E., to the point where the western border of T. 16 N., R. 6 E. meets the northernmost perimeter of Beale Air Force Base in the southwestern corner of T. 16 N., R. 6 E.;</P>
                <P>(3) Then east, south and west along the perimeter of Beale Air Force Base to the point where the perimeter of Beale Air Force Base intersects the western border of R. 7 E. in T. 14 N.;</P>

                <P>(4) Then south, approximately 24 miles, along the western borders of T. 14 N., T. 13 N., T. 12 N., and T. 11 N. in R. 7 E., to the southwestern corner of T. 11 N., R. 7 E. (see “Sacramento” map);<PRTPAGE P="203"/>
                </P>
                <P>(5) Then east, approximately six miles, along the south border of T. 11 N., R. 7 E., to the southeastern corner of T. 11 N., R. 7 E.;</P>
                <P>(6) Then in a south southeasterly direction, in a straight line, approximately three miles, to the northeasternmost corner of Sacramento County in T. 10 N., R. 8 E.;</P>
                <P>(7) Then continuing in a south southeasterly direction, in a straight line, along the Sacramento County—El Dorado County line, approximately 15 miles, to the point where the county line meets the Cosumnes River in the southwestern corner of T. 8 N., R. 9 E.;</P>
                <P>(8) Then south, in a straight line, approximately 14.1 miles, along the Sacramento County—Amador County line, to the point where the county line meets Dry Creek in the northwestern corner of T. 5 N., R. 9 E.;</P>
                <P>(9) Then in a south southeasterly direction, in a stright line, approximately 5.4 miles. along the San Joaquin County—Amador County line, to the point where the Mokelumne River forms the Amador County—Calaveras County line in T. 4 N., R. 9 E.;</P>
                <P>(10) Then continuing in a south southeasterly direction, in a straight line, approximately 10.4 miles, along the San Joaquin County-Calaveras County line, to the point where the power line meets the western border of T. 3 N., R. 10 E.;</P>
                <P>(11) Then in a southeasterly direction, in a straight line, approximately 22.4 miles, along the Calaveras County-Stanislaus County line to the point where the county line meets the Stanislaus River in T. 1 S., R. 12 E. (see “San Jose” map);</P>
                <P>(12) Then in a southeasterly direction, in a straight line, approximately 20 miles, along the Tuolumne County-Stanislaus County line to the point where the county lines of Tuolumne, Mariposa, Stanislaus and Merced counties meet in the southeast corner of T. 3 S., R. 14 E.;</P>
                <P>(13) Then continuing along the Mariposa County-Merced County line in a generally southeasterly direction, approximately 37 miles, to the point where the county lines of Mariposa, Merced and Madera counties meet in the northwestern corner of T. 9 S, R. 18 E.;</P>
                <P>(14) Then northeasterly in a straight line, approximately 23 miles, along the Mariposa County-Merced County line to the point, approximately one mile west of Miami Mountain, where the Mariposa County-Merced County line meets the western border of the boundary of the Sierra National Forest in T. 6S, R. 20 E. (see “Mariposa” map);</P>
                <P>(15) Then in a generally northerly and westerly direction, along the western borders of the Sierra and Stanislaus National Forests in Mariposa County (see “San Jose” map);</P>
                <P>(16) Then in a generally northerly and westerly direction, along the western border of the Stanislaus National Forest in Tuolumne County (see “Sacramento” map);</P>
                <P>(17) Then in a generally northerly and westerly direction, along the western border of the Stanislaus National Forest in Calaveras and Amador counties;</P>
                <P>(18) Then in a generally northerly and westerly direction, along the western border of the El Dorado National Forest in Amador, El Dorado and Placer counties (see “Chico” map);</P>
                <P>(19) Then in a generally northerly and westerly direction, along the western border of the Tahoe National Forest in Placer, Nevada and Yuba counties to the point south of Ruef Hill where the western border of the Tahoe National Forest intersects the northeast corner of T. 18 N., R. 6 E.;</P>
                <P>(20) Then west, approximately five miles, along the north border of T. 18 N., R. 6 E., to the point of beginning.</P>
                <CITA>[T.D. ATF-261, 52 FR 44105, Nov. 18, 1987]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.121</SECTNO>
                <SUBJECT>Warren Hills.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Warren Hills.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Warren Hills viticultural area are thirteen U.S.G.S. maps of the 7.5 minute series. They are titled:</P>
                <P>(1) Riegelsville Quadrangle, Pennsylvania—New Jersey, 1956 (photorevised 1968 and 1973).</P>
                <P>(2) Bloomsbury Quadrangle, New Jersey, 1955 (photorevised 1970).</P>

                <P>(3) High Bridge Quadrangle, New Jersey, 1954 (photorevised 1970).<PRTPAGE P="204"/>
                </P>
                <P>(4) Washington Quadrangle, New Jersey, 1954 (photorevised 1971).</P>
                <P>(5) Hackettstown Quadrangle, New Jersey, 1953 (photorevised 1971, photoinspected 1976).</P>
                <P>(6) Tranquility Quadrangle, New Jersey, 1954 (photorevised 1971).</P>
                <P>(7) Newton West Quadrangle, New Jersey, 1954 (photorevised 1971).</P>
                <P>(8) Flatbrookville Quadrangle, New Jersey—Pennsylvania, 1954 (photorevised 1971).</P>
                <P>(9) Blairstown Quadrangle, New Jersey—Warren Co., 1954 (photorevised 1971).</P>
                <P>(10) Portland Quadrangle, Pennsylvania—New Jersey, 1955 (photorevised 1984).</P>
                <P>(11) Belvidere Quadrangle, New Jersey—Pennsylvania, 1955 (photorevised 1984).</P>
                <P>(12) Bangor Quadrangle, Pennsylvania—New Jersey, 1956 (photorevised 1968 and 1973).</P>
                <P>(13) Easton Quadrangle, New Jersey—Pennsylvania, 1956 (photorevised 1968 and 1973).</P>
                <P>(c) <E T="03">Boundary</E>—(1) <E T="03">General.</E> The Warren Hills viticultural area is located in Warren County, New Jersey. The beginning point of the following boundary description is the junction of the Delaware River and the Musconetcong River, at the southern tip of Warren County (on the Riegelsville map).</P>
                <P>(2) <E T="03">Boundary Description.</E> (i) From the beginning point, the boundary goes northeastward along the Musconetcong River about 32 miles (on the Riegelsville, Bloomsbury, High Bridge, Washington, Hackettstown, and Tranquaility maps) to the point where it intersects the Warren County-Sessex County line;</P>
                <P>(ii) Then northwestward along that county line for about 10 miles (on the Tranquility, Newton West, and Flatbrookville maps) to Paulins Kill;</P>
                <P>(iii) Then generally southwestward along Paulins Kill (on the Flatbrookville, Blairstown and Portland maps) to the Delaware River;</P>
                <P>(iv) Then generally south-southwestward along the Delaware River (on the Portland, Belvidere, Bangor, Easton, and Reigelsville maps) to the beginning point.</P>
                <CITA>[T.D. ATF-276, 53 FR 29676, Aug. 8, 1988]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.122</SECTNO>
                <SUBJECT>Western Connecticut Highlands.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Western Connecticut Highlands.”</P>
                <P>(b) <E T="03">Approved map.</E> The approved map for determining the boundaries of the “Western Connecticut Highlands” viticultural area is 1 U.S.G.S. 1:125,000 series map. It is titled State of Connecticut, Compiled in 1965, Edition of 1966.</P>
                <P>(c) <E T="03">Boundary description.</E> The boundaries of the proposed Western Connecticut Highlands viticultural area are as follows:</P>
                <P>(1) The beginning point is where Connecticut Route #15 (Merritt Parkway) meets the Connecticut-New York State line near Glenville, CT, in the Town of Greenwich.</P>
                <P>(2) The boundary goes approximately 80 miles northerly along the Connecticut-New York State line to the northwest corner of Connecticut at the Town of Salisbury (Connecticut-New York-Massachusetts State line);</P>
                <P>(3) The boundary proceeds approximately 32 miles east along the Connecticut-Massachusetts State line to the northeast border of the Town of Hartland;</P>
                <P>(4) The boundary runs approximately 5 miles south along the eastern boundary of the Town of Hartland to the northeast corner of the Town of Barkhamstead (Litchfield-Hartford County line);</P>
                <P>(5) The boundary then goes south approximately 25 miles along the Litchfield-Hartford County line to the southeast corner of the Town of Plymouth (Litchfield-Hartford-New Haven County line);</P>
                <P>(6) The boundary then travels approximately 7 miles west along the Litchfield-New Haven County line to Connecticut Route #8 at Waterville in the Town of Waterbury;</P>
                <P>(7) The boundary proceeds approximately 25 miles south along Connecticut Route #8 to the intersection of Connecticut Route 15 (Merritt Parkway) near Nichols in the Town of Trumbull;</P>

                <P>(8) The boundary travels approximately 32 miles west along Connecticut <PRTPAGE P="205"/>Route 15 (Merritt Parkway) to the beginning point.</P>
                <CITA>[T.D. ATF-267, 53 FR 3747, Feb. 9, 1988]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.123</SECTNO>
                <SUBJECT>Mt. Veeder.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Mt. Veeder.”</P>
                <P>(b) <E T="03">Approved Maps.</E> The appropriate maps for determining the boundaries of the “Mt. Veeder” viticultural area are three U.S.G.S. Quadrangle (7.5 Minute Series) maps. They are titled:</P>
                <P>(1) Napa, California (1951 (Photorevised (1980))</P>
                <P>(2) Rutherford, California (1951 (Photorevised (1968))</P>
                <P>(3) Sonoma, California (1951 (Photorevised (1980))</P>
                <P>(c) <E T="03">Boundaries.</E> (1) Beginning at unnamed peak, elevation 1,820, on the common boundary between Napa County and Sonoma County in section 23, Township 7 North, Range 6 West, Mount Diablo Base and Meridian on the Rutherford, Calif. U.S.G.S. map;</P>
                <P>(2) Thence south along common boundary between Napa County and Sonoma County to unnamed peak, elevation 1,135 feet on the Sonoma, Calif. U.S.G.S. map;</P>
                <P>(3) Thence continuing south along the ridge line approximately <FR>1/2</FR> mile to unnamed peak, elevation 948 feet;</P>
                <P>(4) Thence due east in a straight line approximately <FR>2/10</FR> mile to the 400 foot contour;</P>
                <P>(5) Thence following the 400 foot contour line north around Carneros Valley and then to the west of Congress Valley and Browns Valley on the Napa, Calif. U.S.G.S. map;</P>
                <P>(6) Thence paralleling Redwood Road to its intersection with the line dividing Range 5 West and Range 4 West, east of the unnamed 837 foot peak;</P>
                <P>(7) Thence north along the line dividing Range 5 West and Range 4 West approximately <FR>4/10</FR> mile to the 400 foot contour;</P>
                <P>(8) Thence briefly southeast, then northwest along the 400 foot contour to the point where that contour intersects the northern border of Section 10, Township 6 North, Range 5 West immediately adjacent to Dry Creek on the Rutherford Calif. U.S.G.S. map;</P>
                <P>(9) Thence northwesterly along Dry Creek through Sections 3 and 4 of Township 6 North, Range 5 West, and Sections 32 and 31 of Township 7 North, Range 5 West, to the fork of Dry Creek near the center of Section 25 of Township 7 North, Range 6 West;</P>
                <P>(10) Continuing along the northern fork of Dry Creek through Sections 25 and 24 of Township 7 North, Range 6 West, to the point at which the main channel of Dry Creek ends and divides into three tributaries;</P>
                <P>(11) Thence following the middle tributary of Dry Creek through Sections 24 and 23 of Township 7 North, Range 6 West, to its source at the intersection with a trail indicated on the map;</P>
                <P>(12) Thence following a straight line west approximately <FR>1/10</FR> mile to the top of unnamed peak, elevation 1,820, the beginning point.</P>
                <CITA>[T.D. ATF-295, 55 FR 5844, Feb. 20, 1990, as amended by T.D. ATF-351, 58 FR 65126, Dec. 13, 1993]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.124</SECTNO>
                <SUBJECT>Wild Horse Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Wild Horse Valley.”</P>
                <P>(b) <E T="03">Approved Map.</E> The appropriate map for determining the boundaries of the “Wild Horse Valley” viticultural area is one U.S.G.S. Quadrangle (7.5 Minute Series) map. It is titled Mt. George, California (1951), photorevised 1968.</P>
                <P>(c) <E T="03">Boundaries.</E> The boundaries of the Wild Horse Valley viticultural area (in Napa and Solano Counties) are as follows:</P>
                <P>(1) The beginning point is on the section line boundary between Section 33, Range 3 West, Township 6 North and Section 4, Range 3 West, Township 5 North, Mount Diablo Range and Meridian, marked with an elevation of 1,731 feet, which is a northwest corner of the boundary between Napa and Solano Counties.</P>
                <P>(2) From the beginning point, the boundary runs in a north-northeasterly direction approximately .9 mile to the summit of an unnamed hill having a marked elevation of 1,804 feet;</P>
                <P>(3) Then northeasterly approximately .7 mile to the summit of an unnamed hill having a marked elevation of 1,824 feet;</P>

                <P>(4) Then south-southeasterly approximately .6 mile to the summit of an <PRTPAGE P="206"/>unnamed hill having a marked elevation of 1,866 feet;</P>
                <P>(5) Then south-southeasterly approximately .5 mile to the summit of an unnamed hill having a marked elevation of 2,062 feet;</P>
                <P>(6) Then southerly approximately .7 mile to the summit of an unnamed hill having a marked elevation of 2,137 feet;</P>
                <P>(7) Then south-southeasterly approximately .4 mile to the summit of an unnamed hill having a marked elevation of 1,894 feet;</P>
                <P>(8) Then southerly approximately 2.3 miles to the midpoint of the section line boundary between Sections 15 and 22, Township 5 North, Range 3 West, Mount Diablo Range and Meridian;</P>
                <P>(9) Then southwesterly approximately 1.3 miles to the summit of an unnamed hill having a marked elevation of 1,593 feet;</P>
                <P>(10) Then west-northwesterly approximately 1.2 miles to the summit of an unnamed hill, on the Napa/Solano County boundary, having a marked elevation of 1,686 feet;</P>
                <P>(11) Then north-northeasterly approximately 1.5 miles to the summit of an unnamed hill having a marked elevation of 1,351 feet;</P>
                <P>(12) Then north-northeasterly approximately 1.2 miles to the summit of an unnamed hill having a marked elevation of 1,480 feet; and</P>
                <P>(13) Then north-northwesterly approximately 1.0 miles to the point of beginning.</P>
                <CITA>[T.D. ATF-278, 53 FR 48247, Nov. 30, 1988]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.125</SECTNO>
                <SUBJECT>Fredericksburg in the Texas Hill Country.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Fredericksburg in the Texas Hill Country.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the Fredericksburg in the Texas Hill Country viticultural area are six U.S.G.S. topographical maps of the 1:24,000 scale. They are titled:</P>
                <P>(1) Stonewall Quadrangle (1961);</P>
                <P>(2) Cain City Quadrangle (1963);</P>
                <P>(3) Fredericksburg East Quadrangle (1967, photorevised 1982);</P>
                <P>(4) Cave Creek School Quadrangle (1961);</P>
                <P>(5) Fredericksburg West Quadrangle (1967, photorevised 1982); and</P>
                <P>(6) Lady Bird Johnson Park Quadrangle (1964, photoinspected 1979).</P>
                <P>(c) <E T="03">Boundaries.</E> The Fredericksburg in the Texas Hill Country viticultural area is located entirely in Gillespie County, Texas, in the central part of the State approximately 80 miles west of Austin. The beginning point is on the Stonewall Quadrangle map near Blumenthal at a point on U.S. Route 290 approximately .1 mile east of bench mark (BM) 1504, at the junction of a light-duty road known locally as Jung Road.</P>
                <P>(1) From the beginning point, the boundary proceeds on Jung Road in a northwesterly direction across the Pedernales River.</P>
                <P>(2) Then northwesterly approximately 1 mile along Jung Road as it parallels the Pedernales River.</P>
                <P>(3) Then north along Jung Road approximately 3.9 miles to a point where Jung Road meets a medium-duty road known locally as Texas Ranch Road 2721.</P>
                <P>(4) Then westerly approximately .1 mile on Texas Ranch Road 2721 to a point where it meets a medium-duty road known locally as Texas Ranch Road 1631.</P>
                <P>(5) Then northeasterly along Texas Ranch Road 1631 approximately 1 mile to a point where Texas Ranch Road 1631 crosses the 1,800 foot contour line.</P>
                <P>(6) Then northwesterly in a meandering manner along the 1,800-foot contour line to the point where the 1,800-foot contour line crosses State Route 16.</P>
                <P>(7) Then in a generally westerly direction along the 1,800-foot contour line to the point where the 1,800-foot contour line crosses State Route 965.</P>
                <P>(8) Then in a northwesterly and then generally a southeasterly direction along the 1,800-foot contour line to a point where the 1,800-foot contour line goes just south of the Kordzik Hills approximately 1 mile due east of the city of Fredericksburg.</P>

                <P>(9) Then continuing on the 1,800-foot contour line in a generally northwesterly, southerly, and again northwesterly direction to the point where the 1,800-foot contour line crosses Loudon <PRTPAGE P="207"/>Road approximately 4 miles northwest of Fredericksburg.</P>
                <P>(10) Then continuing on the 1,800-foot contour line in a northwesterly, then generally a southeasterly, westerly and finally a southerly direction to a point where the 1,800-foot contour line crosses a light-duty road known locally as Hayden Ranch Road about 50 yards north of Texas Ranch Road 2093.</P>
                <P>(11) Then 50 yards south on Hayden Ranch Road to Texas Ranch Road 2093 and then east on Texas Ranch Road 2093 approximately .15 mile to an unimproved, southbound, gravel and dirt county road known locally as Beverly Gold's Road.</P>
                <P>(12) Then approximately 2.6 miles south on Beverly Gold's Road to a point where it joins Texas State Route 16.</P>
                <P>(13) Then approximately 1.5 miles northeast on State Route 16 to a light-duty county road known locally as Bear Creek Road.</P>
                <P>(14) Then approximately 1 mile in a southeasterly, northeasterly, and then a southerly direction along Bear Creek Road to the point where the road crosses the 1,700-foot contour line.</P>
                <P>(15) Then in a generally easterly direction for approximately 10 miles along the 1,700-foot contour line to a point where the 1,700-foot contour line crosses Texas Ranch Road 1376.</P>
                <P>(16) Then approximately 3.1 miles southeast along Texas Ranch Road 1376 to a light-duty road at Luckenbach known locally both as Kunz-Klien Road and Luckenbach Road.</P>
                <P>(17) Then approximately 1.3 miles in a generally northeasterly and then an easterly direction along Luckenbach Road and continuing along Luckenbach Road in a northerly direction about 2.5 miles to the point where Luckenbach Road joins U.S. Route 290.</P>
                <P>(18) Then west approximately .2 mile on U.S. Route 290 to the intersection with Jung Road, the point of beginning.</P>
                <CITA>[T.D. ATF-279, 53 FR 51541, Dec. 22, 1988]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.126</SECTNO>
                <SUBJECT>Santa Clara Valley.</SUBJECT>
                <P>(a) Name. The name of the viticultural area described in this section is “Santa Clara Valley.”</P>
                <P>(b) Approved Maps. The appropriate maps for determining the boundaries of the “Santa Clara Valley” viticultural area are 25 U.S.G.S. Quadrangle (7.5 Minute Series) maps. They are titled:</P>
                <P>(1) Calaveras Reservoir, Calif., 1961 (photorevised 1980);</P>
                <P>(2) Castle Rock Ridge, Calif., 1955 (photorevised 1968), photoinspected 1973;</P>
                <P>(3) Chittenden, Calif., 1955 (photorevised 1980);</P>
                <P>(4) Cupertino, Calif., 1961 (photorevised 1980);</P>
                <P>(5) Gilroy, Calif., 1955 (photorevised 1981);</P>
                <P>(6) Gilroy Hot Springs, Calif., 1955 (photorevised 1971), photoinspected 1973;</P>
                <P>(7) Lick Observatory, Calif., 1955 (photorevised 1968), photoinspected 1973;</P>
                <P>(8) Loma Prieta, Calif., 1955 (photorevised 1968);</P>
                <P>(9) Los Gatos, Calif., 1953 (photorevised 1980);</P>
                <P>(10) Milpitas, Calif., 1961 (photorevised 1980);</P>
                <P>(11) Mindego Hill, Calif., 1961 (photorevised 1980);</P>
                <P>(12) Morgan Hill, Calif., 1955 (photorevised 1980);</P>
                <P>(13) Mt. Madonna, Calif., 1955 (photorevised 1980);</P>
                <P>(14) Mt. Sizer, Calif., 1955 (photorevised 1971), photoinspected 1978;</P>
                <P>(15) Mountain View, Calif., 1961 (photorevised 1981);</P>
                <P>(16) Newark, Calif., 1959 (photorevised 1980);</P>
                <P>(17) Niles, Calif., 1961 (photorevised 1980);</P>
                <P>(18) Pacheco Peak, Calif., 1955 (photorevised 1971);</P>
                <P>(19) Palo Alto, Calif., 1961 (photorevised 1973);</P>
                <P>(20) San Felipe, Calif., 1955 (photorevised 1971);</P>
                <P>(21) San Jose East, Calif., 1961 (photorevised 1980);</P>
                <P>(22) San Jose West, Calif., 1961 (photorevised 1980);</P>
                <P>(23) Santa Teresa Hills, Calif., 1953 (photorevised 1980);</P>
                <P>(24) Three Sisters, Calif., 1954 (photorevised 1980);</P>

                <P>(25) Watsonville East, Calif., 1955 (photorevised 1980); and<PRTPAGE P="208"/>
                </P>
                <P>(c) The boundaries of the proposed Santa Clara Valley viticultural area are as follows:</P>
                <P>(1) The beginning point is at the junction of Elephant Head Creek and Pacheco Creek (approx. .75 mile southwest of the Pacheco Ranger Station) on the Pacheco Peak, Calif. U.S.G.S. map.</P>
                <P>(2) From the beginning point the boundary moves in a northerly direction up Elephant Head Creek approx. 1.2 miles until it intersects the 600 foot elevation contour line;</P>
                <P>(3) Then it meanders in a northwesterly direction along the 600 foot contour line approx. 55 miles until it intersects Vargas Road in the northwest portion of Sec. 25, T4S/RlW on the Niles, Calif. U.S.G.S. map;</P>
                <P>(4) Then it travels in a northwesterly direction approx. .6 mile to the intersection of Morrison Canyon Road in the eastern portion of Sec. 23, T4S/RlW;</P>
                <P>(5) Then it follows Morrison Canyon Road west approx. 1.5 miles to Mission Boulevard (Highway 238) at Sec. 22, T4S/RlW;</P>
                <P>(6) Then it moves northwest on Mission Boulevard (Highway 238) approx. .6 mile to the intersection of Mowry Avenue just past the Sanatorium at Sec. 22, T4S/RlW;</P>
                <P>(7) It then goes in a southwesterly direction on Mowry Avenue approx. 3.6 miles to the intersection of Nimitz Freeway (Highway 880) (depicted on the map as Route 17) at Sec. 5, T5S/RlW, on the Newark, Calif. U.S.G.S. map;</P>
                <P>(8) It then moves along the Nimitz Freeway (Highway 880) in a southeasterly direction for approx. 9 miles to the intersection of Calaveras Boulevard (Highway 237) at Milpitas on the Milpitas, Calif. U.S.G.S. map;</P>
                <P>(9) Then it follows Highway 237 in a westerly direction approx. 7.2 miles to intersection of Bay Shore Freeway (Highway 101) at Moffett Field on the Mt. View, Calif. U.S.G.S. map;</P>
                <P>(10) Then in a northwest direction follow Bay Shore Freeway (Highway 101) for approx. 6.5 miles to the intersection of the San Francisquito Creek (Santa Clara County/San Mateo County boundary) at Palo Alto T5S/R2W, on the Palo Alto, Calif. U.S.G.S. map;</P>
                <P>(11) Then it heads west on San Francisquito Creek (Santa Clara County/San Mateo County boundary) approx. 7 miles until it converges with Los Trancos Creek (Santa Clara County/San Mateo County boundary) near Bench Mark 172, approx. 100 feet east of Alpine Road;</P>
                <P>(12) It travels south approx. 4 miles along Los Trancos Creek (Santa Clara County/San Mateo County boundary) until it intersects the 600 foot elevation contour line at El Corte De Madera, approx. .5 mile north of Trancos Woods on the Mindego Hill, Calif. U.S.G.S. map;</P>
                <P>(13) It moves along the 600 foot elevation contour line in a southeasterly direction approx. 10 miles to Regnart Road at Regnart Creek on the Cupertino, Calif. U.S.G.S. map;</P>
                <P>(14) It goes northeast along Regnart Road, approx. .7 mile to the 400 foot elevation contour line (.3 mile southwest of Regnart School);</P>
                <P>(15) It travels along the 400 foot elevation contour line southeast approx. 1.4 miles to the north section line of Section 36, T7S/R2W at Blue Hills, CA;</P>
                <P>(16) The boundary goes east on the section line approx. .4 mile to Saratoga Sunnyvale Road (Highway 85);</P>
                <P>(17) It travels south on Saratoga Sunnyvale Road (Highway 85) approx. 1 mile to the south section line of Section 36, T7/8S R2W;</P>
                <P>(18) Then it goes west on the section line approx. .75 mile to the first intersection of the 600 foot elevation contour line;</P>
                <P>(19) It follows the 600 foot elevation contour line southeast approx. .75 mile to Pierce Road south of Calabazas Creek;</P>
                <P>(20) It then travels south on Pierce Road approx. .4 mile to the first intersection of the 800 foot elevation contour line;</P>
                <P>(21) Then it runs southeast approx. 28 miles on the 800 foot elevation contour line to the east section line of Sec. 25, T10S/R2E/R3E approx. .5 mile north of Little Arthur Creek on the Mt. Madonna, Calif. U.S.G.S. map;</P>
                <P>(22) Then it goes south on the section line approx. .5 mile to the 800 foot elevation contour line approx. .2 mile south of Little Arthur Creek;</P>

                <P>(23) Then it goes southeast along the 800 foot elevation contour line approx. 2.7 miles to Hecker Pass Road (Highway 152) approx. 1.25 miles east of <PRTPAGE P="209"/>Hecker Pass on the Watsonville East, Calif. U.S.G.S. map;</P>
                <P>(24) The boundary goes northeast on Hecker Pass Road (Highway 152) approx. .75 mile to the intersection of the 600 foot elevation contour line just west of Bodfish Creek;</P>
                <P>(25) It travels southeast along the 600 foot elevation contour line approx. 7.3 miles to the first intersection of the western section line of Sec. 30, T11S/R3E/R4E on the Chittenden, Calif. U.S.G.S. map;</P>
                <P>(26) Then it follows south along the section line approx. 1.9 miles to the south township line at Sec. 31, T11S/T12S, R3E/R4E;</P>
                <P>(27) It moves in an easterly direction along the township line approx. 12.4 miles to the intersection of T11S/T12S and R5E/R6E on the Three Sisters, Calif. U.S.G.S. map;</P>
                <P>(28) Then it goes north along R5E/R6E range line approx. 5.3 miles to Pacheco Creek on the Pacheco Creek, Calif. U.S.G.S. map;</P>
                <P>(29) Then it moves northeast along Pacheco Creek approx. .5 mile to Elephant Head Creek at the point of beginning.</P>
                <SECAUTH>[T.D. ATF-286, 54 FR 12606, Mar. 28, 1989]</SECAUTH>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.127</SECTNO>
                <SUBJECT>Cayuga Lake.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Cayuga Lake.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate map for determining the boundaries of the Cayuga Lake viticultural area is one U.S.G.S. map scaled 1:250,000, titled “Elmira, New York; Pennsylvania,” 1962 (revised 1978).</P>
                <P>(c) <E T="03">Boundaries.</E> The Cayuga Lake viticultural area is located within the counties of Seneca, Tompkins, and Cayuga, in the State of New York, within the Finger Lakes viticultural area. The boundaries are as follows:</P>
                <P>(1) Commencing at the intersection of State Route 90 with State Route 5 in Cayuga County, north of Cayuga Lake.</P>
                <P>(2) Then south along State Route 90 to a point approximately one mile past the intersection of State Route 90 with State Route 326.</P>
                <P>(3) Then south along the primary, all-weather, hard surface road, approximately <FR>3/4</FR> mile, until it becomes State Route 90 again at Union Springs.</P>
                <P>(4) Then south/southeast along State Route 90 until it intersects the light-duty, all-weather, hard or improved surface road, approximately 1.5 miles west of King Ferry.</P>
                <P>(5) Then south along another light-duty, all-weather, hard or improved surface road, approximately 4 miles, until it intersects State Route 34B, just south of Lake Ridge.</P>
                <P>(6) Then follow State Route 34B in a generally southeast direction until it intersects State Route 34, at South Lansing.</P>
                <P>(7) Then south along State Route 34, until it meets State Route 13 in Ithaca.</P>
                <P>(8) Then southwest along State Routes 34/13, approximately 1.5 miles, until it intersects State Route 79, in Ithaca.</P>
                <P>(9) Then west along State Route 79, approximately <FR>1/2</FR> mile, until it intersects State Route 96.</P>
                <P>(10) Then along State Route 96, in a generally northwest direction, until it intersects State Routes 414 and 96A in Ovid.</P>
                <P>(11) Then north along State Routes 96/414, until they divide, approximately 2.5 miles north of Ovid.</P>
                <P>(12) Then along State Route 414, in a generally northeast direction, until it meets U.S. Route 20 in the town of Seneca Falls.</P>
                <P>(13) Then along U.S. Route 20, in a northeast direction, until it intersects State Routes 318, 89, and 5.</P>
                <P>(14) Then along U.S. Route 20/State Route 5, in a northeast direction, to the beginning point, at the intersection with State Route 90.</P>
                <CITA>[T.D. ATF-269, 53 FR 9769, Mar. 25, 1988]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.128</SECTNO>
                <SUBJECT>Seneca Lake.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Seneca Lake”.</P>
                <P>(b) <E T="03">Approved Maps.</E> The appropriate maps for determining the boundary of the Seneca Lake viticultural area are 13 United States Geological Survey (USGS) topographic maps (Scale: 1:24,000). The maps are titled:</P>
                <P>(1) Burdett Quadrangle (New York—Schuyler Co. 1950 (photoinspected 1976));</P>

                <P>(2) Montour Falls Quadrangle (New York 1978 (photorevised 1976));<PRTPAGE P="210"/>
                </P>
                <P>(3) Beaver Dams Quadrangle (New York 1953);</P>
                <P>(4) Reading Center Quadrangle (New York 1950 (photorevised 1978));</P>
                <P>(5) Dundee Quadrangle (New York 1942 (photoinspected 1976));</P>
                <P>(6) Dresden Quadrangle (New York 1943 (photorevised 1978));</P>
                <P>(7) Penn Yan Quadrangle (New York—Yates Co. 1942 (photoinspected 1976));</P>
                <P>(8) Stanley Quadrangle (New York 1952);</P>
                <P>(9) Phelps Quadrangle (New York—Ontario Co. 1953);</P>
                <P>(10) Geneva North Quadrangle (New York 1953 (photorevised 1976));</P>
                <P>(11) Geneva South Quadrangle (New York 1953 (photorevised 1978));</P>
                <P>(12) Ovid Quadrangle (New York—Seneca Co. 1970); and</P>
                <P>(13) Lodi Quadrangle (New York 1942).</P>
                <P>(c) <E T="03">Boundaries.</E> The Seneca Lake viticultural area surrounds Seneca Lake in upstate New York and is located in portions of Schuyler, Yates, Ontario, and Seneca counties. The boundaries are as follows:</P>
                <P>(1) Beginning in the town of Watkins Glen at the State Route 414 bridge over the New York State Barge Canal, follow the Canal south approximately 0.2 miles to the mouth of Glen Creek, on the Burdette, N.Y. map;</P>
                <P>(2) Follow Glen Creek upstream (west), crossing onto the Montour Falls, N.Y. map and continuing to the road locally known as the Van Zandt Hollow Road on the Beaver Dams, N.Y. map;</P>
                <P>(3) Proceed north on Van Zandt Hollow Road to Cross Road;</P>
                <P>(4) Continue north on Cross Road, which changes to Cretsley Road, to its intersection with Mud Lake Road (County Road 23) on the Reading Center, N.Y. map;</P>
                <P>(5) Proceed west approximately 0.7 miles on County Road 23 to its intersection with Pre-emption Road;</P>
                <P>(6) Then continue north on Pre-emption Road along the Dundee, N.Y., Penn Yan, N.Y. and Dresden, N.Y. maps, for approximately 18 miles to its junction with an unnamed light duty road just east of Keuka Lake Outlet on the Penn Yan, N.Y. map;</P>
                <P>(7) Follow the unnamed light duty road across the Keuka Outlet, traveling approximately 0.3 miles to its junction in Seneca Mills with an unnamed light duty road, known locally as Outlet Road;</P>
                <P>(8) Follow Outlet Road west along the north bank of the Keuka Outlet approximately 0.6 miles, until the road forks;</P>
                <P>(9) At the fork, continue north approximately 1 mile, on an unnamed light duty road know locally as Stiles Road, to its junction with Pre-emption Road.</P>
                <P>(10) Then proceed north 14.6 miles on Pre-emption Road across the Stanley, N.Y. map, to an unnamed medium duty road, known locally as County Road 4, on the Phelps, N.Y. map;</P>
                <P>(11) Continue west approximately 4.5 miles on County Road 4 to its intersection with Orleans Road in Seneca Castle;</P>
                <P>(12) Then proceed north on Orleans Road, which becomes Seneca Castle Road, for 2.1 miles, to Warner Corners where the name of the road changes to Wheat Road;</P>
                <P>(13) Continue north from Warner Corners on Wheat Road approximately 1.9 miles to its intersection with State Route 88;</P>
                <P>(14) Continue north on State Route 88 approximately 1.4 miles, to its intersection with State Route 96 at Knickerbocker Corner;</P>
                <P>(15) Continue east on State Route 96 approximately 10.4 miles, to the intersection with Brewer Road on the Geneva North, N.Y. map;</P>
                <P>(16) Follow Brewer Road south approximately 1.8 miles to the intersection with U.S. Route 20/State Route 5;</P>
                <P>(17) At the intersection of Brewer Road and U.S. Route 20/State Route 5, continue south approximately 0.1 miles, following an imaginary line to the south bank of the Seneca River;</P>
                <P>(18) Follow the south bank of the Seneca River east approximately 0.1 miles to the mouth of the Kendig Creek;</P>
                <P>(19) Continue south following the Kendig Creek approximately 3.3 miles to the Creek's intersection with Yellow Tavern Road on the Geneva South, N.Y. map;</P>

                <P>(20) Follow Yellow Tavern Road west approximately 0.1 miles, to its intersection with Post Road;<PRTPAGE P="211"/>
                </P>
                <P>(21) Follow Post Road south approximately 1.4 miles to its junction with State Route 96A;</P>
                <P>(22) Then follow State Route 96A south 17.5 miles across the Dresden, N.Y., Ovid, N.Y., and Lodi, N.Y. maps to the village of Lodi;</P>
                <P>(23) In Lodi, continue south where State Route 96A changes to S. Main Street and then changes to an unnamed medium duty road (known locally as Center Road-Country Road 137);</P>
                <P>(24) Continue south on Center Road-Country Road 137 for approximately 4.9 miles to the Seneca/Schuyler County Line;</P>
                <P>(25) Then proceed west 0.5 miles on the county line to Logan Road;</P>
                <P>(26) Then proceed 8.6 miles south on Logan Road to State Route 227 (identified by the petitioner as State Route 79) on the Burdette, N.Y. map;</P>
                <P>(27) Then proceed approximately 800 feet east on Route 227 to Skyline Drive;</P>
                <P>(28) Then proceed south on Skyline Drive for 2.5 miles to an unnamed stream;</P>
                <P>(29) Follow the unnamed stream west approximately 0.6 miles to its intersection with State Route 414; and</P>
                <P>(30) Continue west on State Route 414 approximately 0.5 miles to the beginning point on the bridge over the New York State Barge Canal.</P>
                <CITA>[TTB T.D.-3, 68 FR 39835, July 3, 2003]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.129</SECTNO>
                <SUBJECT>Arroyo Grande Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Arroyo Grande Valley.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of Arroyo Grande Valley viticultural area are four U.S.G.S. topographical maps of the 1:24,000 scale:</P>
                <P>(1) “Arroyo Grande, NE, California,” edition of 1965, photorevised 1978.</P>
                <P>(2) “Tar Spring Ridge, California,” edition of 1967.</P>
                <P>(3) “Nipomo, California,” edition of 1965.</P>
                <P>(4) “Oceano, California,” edition of 1965, photorevised 1979.</P>
                <P>(c) <E T="03">Boundary:</E> The Arroyo Grande Valley viticultural area is located in San Luis Obispo County in the State of California. The boundary is as follows:</P>
                <P>(1) Beginning on the “Arroyo Grande” map at the point of intersection of State Route 227 and Corbit Canyon Road in Arroyo Grande Township, the boundary proceeds approximately 0.1 mile, in a northwesterly direction, along the roadway of State Route 227 to the point where State Route 227 intersects with Printz Road in Poorman Canyon in the Santa Manuela land grant;</P>
                <P>(2) Then northwesterly, approximately 1.5 miles, along Printz Road to its intersection with Noyes Road in the Santa Manuela land grant;</P>
                <P>(3) Then northerly, approximately 1.5 miles, along Noyes Road to its intersection with State Route 227 (at vertical control station “BM 452”) in the Santa Manuela land grant;</P>
                <P>(4) Then in a northeasterly direction in a straight line approximately 1.4 miles to the intersection of Corbit Canyon Road with an unnamed, unimproved road at Verde in the Santa Manuela land grant;</P>
                <P>(5) Then approximately 1.9 miles in a generally northeasterly direction, along the meanders of said unimproved road to its easternmost point, prior to the road turning back in a northwesterly direction to its eventual intersection with Biddle Ranch Road;</P>
                <P>(6) Then in a northwesterly direction approximately 1.13 miles in a straight line to the summit of an unnamed peak identified as having an elevation of 626 feet in the Santa Manuela land grant;</P>
                <P>(7) Then easterly, approximately 0.46 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 635 feet, in the Santa Manuela land grant;</P>
                <P>(8) Then east northeasterly, approximately 0.27 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 799 feet, in the Santa Manuela land grant;</P>
                <P>(9) Then easterly, approximately 0.78 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 952 feet, in the Santa Manuela land grant;</P>

                <P>(10) Then easterly, approximately 0.7 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,188 feet, in the southwest corner of section 29, T. 31 S., R. 14 E.;<PRTPAGE P="212"/>
                </P>
                <P>(11) Then east southeasterly, approximately 0.9 mile in a straight line, to the point at which Upper Arroyo Grande Road crosses the spillway of Lopez Dam in section 32, T. 31 S., R. 14 E. (see “Tar Spring Ridge” map);</P>
                <P>(12) Then, in a generally easterly direction, approximately 3.64 miles along Upper Arroyo Grande Road (under construction) to the point where the broken red line for the proposed location of said road diverges in a northerly direction from the light duty roadbed of said road in the Arroyo Grande land grant (north of section 35, T. 31 S., R. 14 E.);</P>
                <P>(13) Then, in a generally northerly direction, approximately 2.5 miles, along the broken red line for the proposed location of Upper Arroyo Grande Road to its point of intersection with an unnamed unimproved road (this intersection being 1.2 miles northwest of Ranchita Ranch) in the Arroyo Grande land grant;</P>
                <P>(14) From the point of intersection of the proposed location of Upper Arroyo Grande Road and the unnamed unimproved road, the boundary proceeds in a straight line, east northeasterly, approximately 1.8 miles, to the summit of an unnamed peak identified as having an elevation of 1,182 feet, in the northwest corner of section 19, T. 31 S., R. 15 E.;</P>
                <P>(15) Then southeasterly, approximately 1.8 miles in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,022 feet, in the northeast corner of section 29, T. 31 S., R. 15 E.;</P>
                <P>(16) Then west southwesterly, approximately 0.84 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,310 feet, in the northeast corner of section 30, T. 31 S., R. 15 E.;</P>
                <P>(17) Then south southeasterly, approximately 1.46 miles in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,261 feet, in section 32, T. 31 S., R. 15 E.;</P>
                <P>(18) Then southeasterly, approximately 0.7 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,436 feet, in the northwest corner of section 4, T. 32 S., R. 15 E.;</P>
                <P>(19) Then southwesterly, approximately 1.07 miles in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,308 feet, in the Huasna land grant;</P>
                <P>(20) Then west northwesterly, approximately 1.50 miles in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,070 feet, along the east border of section 1, T. 32 S., R. 14 E.;</P>
                <P>(21) Then south southeasterly, approximately 1.38 miles in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,251 feet, in the Hausna land grant;</P>
                <P>(22) Then southwesterly, approximately 0.95 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,458 feet, in the Santa Manuela land grant;</P>
                <P>(23) Then southeasterly, approximately 0.8 mile in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,377 feet, in the Huasna land grant;</P>
                <P>(24) Then southwesterly, approximately 1.4 miles in a straight line, to the summit of an unnamed peak identified as having an elevation of 1,593 feet, in the Santa Manuela land grant (See “Nipomo” map);</P>
                <P>(25) Then southwesterly, approximately 1.1 miles in a straight line, to the jeep trail immediately north of the summit of an unnamed peak identified as having an elevation of 1,549 feet, just north of section 35, T. 32 S., R. 14 E.;</P>
                <P>(26) Then north northwesterly, approximately 2.73 miles along the jeep trail on Newsom Ridge to the point of intersection of said jeep trail and an unnamed unimproved road (immediately north of section 28, T. 32 S., R. 14 E.);</P>
                <P>(27) Then southerly, approximately 1.63 miles along said unimproved road to its intersection with Upper Los Berros No. 2 Road in section 33, T. 32 S., R. 14 E.;</P>

                <P>(28) Then southwesterly, approximately 3.27 miles along the stream in Los Berros Canyon (of which approximately 2.0 miles are along Upper Los Berros No. 2 Road) to the point at which U.S. Highway 101 crosses said stream in section 35, T. 12 N., R. 35 W. (See “Oceano” map);<PRTPAGE P="213"/>
                </P>
                <P>(29) Then across U.S. Highway 101 and continuing in a southwesterly direction approximately 0.1 mile to Los Berros Arroyo Grande Road;</P>
                <P>(30) Then following Los Berros Arroyo Grande Road in generally a northwesterly direction approximately 4 miles until it intersects with Valley Road;</P>
                <P>(31) Then following Valley Road in generally a northerly direction approximately 1.2 miles until it intersects with U.S. Highway 101;</P>
                <P>(32) Then in a northwesterly direction along U.S. Highway 101 approximately .35 mile until it intersects with State Highway 227;</P>
                <P>(33) Then in a northeasterly and then a northerly direction along State Highway 227 approximately 1.4 miles to the point of beginning.</P>
                <CITA>[T.D. ATF-291, 55 FR 287, Jan. 4, 1990]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.130</SECTNO>
                <SUBJECT>San Ysidro District.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “San Ysidro District.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the San Ysidro District viticultural area are four U.S.G.S. Quadrangle (7.5 minute series) maps. They are titled:</P>
                <P>(1) Gilroy, Calif., 1955 (photorevised 1981);</P>
                <P>(2) Chittenden, Calif., 1955 (photorevised 1980);</P>
                <P>(3) San Felipe, Calif., 1955 (photorevised 1971);</P>
                <P>(4) Gilroy Hot Springs, Calif., 1955 (photorevised 1971, photoinspected 1978.)</P>
                <P>(c) <E T="03">Boundary.</E> The San Ysidro District viticultural area is located in Santa Clara County, California, within the Santa Clara Valley viticultural area. The boundary is as follows:</P>
                <P>(1) The beginning point is the intersection of California State Highway 152 and Ferguson Road with an un-named wash, or intermittent stream, on the Gilroy, Calif., U.S.G.S. map;</P>
                <P>(2) From the beginning point, the boundary follows the wash northeast as it runs co-incident with the old Grant boundary for approximately 3,800 feet;</P>
                <P>(3) The boundary then follows the wash when it diverges from the old Grant boundary and continues approximately 2,300 feet in a northeasterly direction, crosses and recrosses Crews Road, then follows the wash southeast until the wash turns northeast in section 35, T.10S., R.4E., on the Gilroy Hot Springs, Calif., map;</P>
                <P>(4) The boundary then diverges from the wash, continuing in a straight line in a southeasterly direction, across an unimproved road, until it intersects with the 600 foot contour line.</P>
                <P>(5) The boundary then proceeds in a straight line at about the 600 foot elevation in a southeasterly direction until it meets the minor northerly drainage of the San Ysidro Creek;</P>
                <P>(6) The boundary then follows the minor northerly drainage of San Ysidro Creek southeast for approximately 2,000 feet to the seasonal pond adjacent to Canada Road;</P>
                <P>(7) From the seasonal pond, the boundary follows the southerly drainage of San Ysidro Creek for about 1,300 feet until it reaches the southwest corner of section 36, T.10S., R.4E.;</P>
                <P>(8) The boundary then continues in a straight line in a southerly direction across Canada Road for approximately 900 feet until it intersects with the 600 foot contour line;</P>
                <P>(9) The boundary follows the 600 foot contour line for approximately 6,000 feet in a generally southeasterly direction, diverges from the contour line and continues southeast another 1,200 feet until it meets an unimproved road near the north end of a seasonal pond on the San Felipe, Calif., U.S.G.S. map;</P>
                <P>(10) The boundary follows the unimproved road to Bench Mark 160 at Highway 152.</P>
                <P>(11) The boundary then follows Highway 152 in a northwesterly direction across the northeast corner of the Chittenden, Calif., U.S.G.S. map, and back to the beginning point at the junction of Ferguson Road and Highway 152.</P>
                <CITA>[T.D. ATF-305, 55 FR 47749, Nov. 15, 1990]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.131</SECTNO>
                <SUBJECT>Mt. Harlan.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Mt. Harlan.”</P>
                <P>(b) <E T="03">Approved Maps.</E> The appropriate maps for determining the boundaries of the “Mt. Harlan” viticultural area are two U.S.G.S. Quadrangle (7.5 Minute Series) maps. They are titled:<PRTPAGE P="214"/>
                </P>
                <P>(1) Mt. Harlan, California (Photorevised (1984)).</P>
                <P>(2) Paicines, California (Photorevised (1984)).</P>
                <P>(c) <E T="03">Boundaries.</E> (1) The point of beginning is the unnamed 3,063′ peak on the county line between San Benito and Monterey Counties in Township 14 S., Range 5 E., Section 34 of the “Mt. Harlan,” California Quadrangle map.</P>
                <P>(2) From the point of beginning on the Mt. Harlan Quadrangle map proceed in a generally northwesterly direction along the county line through Sections 34 and 33, briefly into Section 28 and back through Section 33, and then through Sections 32, 29, and 30 all in Township 14 S., Range 5 E., to the point at which the county line intersects the line between Sections 30 and 19 of said Township and Range.</P>
                <P>(3) Thence proceed in a straight line northeast approximately 750 feet to the commencement of the westernmost stream leading into Pescadero Creek. The stream commences in the southwest corner of Section 19 in Township 14 S., Range 5 E.</P>
                <P>(4) Thence following the stream in a northeasterly direction to its intersection with the 1,800-foot contour line near the center of Section 19 in Township 14 S., Range 5 E.</P>
                <P>(5) Thence following the 1,800′ contour line in a southeasterly and then northeasterly direction through Sections 19, 20, 17, 16, 15, 14, then through the area north of Section 14, then southerly through Section 13 on the Mt. Harlan Quadrangle map and continuing on the “Paicines,” California Quadrangle map to the point at which the 1800-foot contour line intersects the line between Sections 13 and 24 of Township 14 S., Range 5 E.</P>
                <P>(6) Thence along the 1,800′ contour line through Section 24, back up through Section 13, and then in a southerly direction through Sections 18, 19, and 30 (all on the Paicines Quadrangle map), then westerly through Section 25 on the Paicines Quadrangle map and continuing on the Mt. Harlan Quadrangle map, and then through Section 26 to the point of intersection of said 1,800′ contour and Thompson Creek near the center of Section 26 in Township 14 S., Range 5 E., on the Mt. Harlan Quadrangle map.</P>
                <P>(7) Thence southwesterly along Thompson Creek to its commencement in the northwest corner of Section 34, Township 14 S., Range 5 E.</P>
                <P>(8) Thence in a straight line to the beginning point.</P>
                <CITA>[T.D. ATF-304, 55 FR 47747, Nov. 15, 1990]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.132</SECTNO>
                <SUBJECT>Rogue Valley.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Rouge Valley.”</P>
                <P>(b) <E T="03">Approved map.</E> The appropriate map for determining the boundaries of the Rogue Valley viticultural area is one U.S.G.S. map titled “Medford,” scale 1:250,000 (1955, revised 1976).</P>
                <P>(c) <E T="03">Boundaries.</E> The Rogue Valey viticultural area is located entirely within Jackson and Josephine Counties in southwestern Oregon. The boundaries are as follows:</P>
                <P>(1) Beginning at the point of intersection of Interstate 5 and the Josephine County/Douglas County line approximately 20 miles north of Grants Pass, the boundary proceeds southerly and southwesterly along U.S. Interstate 5 to and including the town of Wolf Creek;</P>
                <P>(2) Then westerly and southerly out of the town of Wolf Creek along the Southern Pacific Railway Line to and including the town of Hugo;</P>
                <P>(3) Then southwesterly along the secondary, hard surface road known as Hugo Road to the point where the Hugo Road crosses Jumpoff Joe Creek;</P>
                <P>(4) Then westerly and down stream along Jumpoff Joe Creek to the intersection of Jumpoff Joe Creek and the Rogue River;</P>
                <P>(5) Then northwesterly and down stream along the Rogue River to the first point where the Wild and Scenic Rogue River designated area touches the easterly boundary of the Siskiyou National Forest just south of Galice;</P>
                <P>(6) Then in a generally southwesterly direction (with many diversions) along the easterly border of the Siskiyou National Forest to the 42 degree 0 minute latitude line;</P>

                <P>(7) Then easterly along the 42 degree 0 minute latitude line to the point where the Siskiyou National Forest again crosses into Oregon approximately 1 mile east of U.S. Highway 199;<PRTPAGE P="215"/>
                </P>
                <P>(8) Then in a generally northeasterly direction and then a southeasterly direction (with many diversions) along the northern boundary of the Siskiyou National Forest to the point where the Siskiyou National Forest touches the Rogue River National Forest at Big Sugarloaf Peak;</P>
                <P>(9) Then in a generally easterly direction (with many diversions) along the northern border of the Rogue River National Forest to the point where the Rogue River National Forest intersects with Slide Creek approximately 6 miles southeast of Ashland;</P>
                <P>(10) Then southeasterly and northeasterly along Slide Creek to the point where it intersects State Highway 273;</P>
                <P>(11) Then northwesterly along State Highway 273 to the point where it intersects State Highway 66;</P>
                <P>(12) Then in an easterly direction approximately 5 miles along State Highway 66 to the east line of Township 39 South, Range 2 East (T39S, R2E);</P>
                <P>(13) Then following the east line of T39S, R2E, in a northerly direction to the northeast corner of T39S, R2E;</P>
                <P>(14) Then westerly approximately 5 miles along the north line of T39S, R2E, to the 2,600 foot contour line;</P>
                <P>(15) Then in a northerly direction following the 2,600 foot contour line across Walker Creek and then in a southwesterly direction to the point where the 2,600 foot contour line touches the east line of T38S, R1E;</P>
                <P>(16) Then northerly along the east line of T38S, R1E, to the northeast corner of T38S, R1E;</P>
                <P>(17) Then westerly along the north line of T38S, R1E, to the northwest corner of T38S, R1E;</P>
                <P>(18) Then northerly along the west line of T37S, R1E, to the northwest corner of T37S, R1E.</P>
                <P>(19) Then easterly along the north lines of T37S, R1E, and T37S, R2E, to the southeast corner of T36S, R2E;</P>
                <P>(20) Then northerly along the east line of T36S, R2E, to the northeast corner of T36S, R2E;</P>
                <P>(21) Then westerly along the north line of T36S, R2E, to the northwest corner of T36S, R2E;</P>
                <P>(22) Then northerly along the east line of T35S, R1E, to the northeast corner of T35S, R1E;</P>
                <P>(23) Then westerly along the north line of T35S, R1E, to the northwest corner of T35S, R1E;</P>
                <P>(24) Then northerly along the east line of T34S, R1W, to the northeast corner of T34S, R1W;</P>
                <P>(25) Then westerly along the north lines of T34S, R1E; T34S, R2W; T34S, R3W; T34S, R4W; and T34S, R5W, to the northwest corner of T34S, R5W;</P>
                <P>(26) Then northerly along the west line of T33S, R5W, to the Josephine County/Douglas County line;</P>
                <P>(27) Then westerly along the Josephine County/Douglas County line to U.S. Interstate 5, the point of beginning.</P>
                <CITA>[T.D. ATF-310, 56 FR 2435, Jan. 23, 1991]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.133</SECTNO>
                <SUBJECT>Rutherford.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Rutherford.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Rutherford viticultural area are two U.S.G.S. topographical maps of the 1:24,000 scale:</P>
                <P>(1) “Yountville Quadrangle, California,” edition of 1951, photorevised 1968.</P>
                <P>(2) “Rutherford Quadrangle, California,” edition of 1951, photorevised 1968, photoinspected 1973.</P>
                <P>(c) <E T="03">Boundary.</E> The Rutherford viticultural area is located in Napa County in the State of California. The boundary is as follows:</P>
                <P>(1) Beginning on the Yountville quadrangle map at the point where the county road known as the Silverado Trail intersects Skellenger Lane, just outside the southwest corner of Section 12, Township 7 North (T.7 N.), Range 5 West (R.5 W.), the boundary proceeds in a southwesterly direction in a straight line approximately 1.7 miles along Skellenger Lane, past its intersection with Conn Creek Road, to the point of intersection with the main channel of the Napa River (on the “Rutherford” map);</P>
                <P>(2) Then south along the center of the river bed approximately .4 miles to the point where an unnamed stream drains into the Napa River from the west;</P>

                <P>(3) Then along the unnamed stream in a generally northwesterly direction to its intersection with the west track <PRTPAGE P="216"/>of the Southern Pacific Railroad Track;</P>
                <P>(4) Then southeasterly along said railroad track 1,650 feet to a point which is approximately 435 feet north of the centerline of the entry road to Robert Mondavi Winery (shown on the map) to the southeast corner of Assessor's Parcel Number 27-250-14;</P>
                <P>(5) Thence southwesterly S 55°06′28″ W for 3,869 feet along the common boundary between Assessor's Parcel Numbers 27-250-14 and 27-280-50/51 to the southwest corner of Assessor's Parcel Number 27-250-14;</P>
                <P>(6) Thence northwesterly N 40°31′42″ W for 750 feet along the westerly property line of Assessor's Parcel Number 27-250-14;</P>
                <P>(7) Thence southwesterly S 51°00′ W in a straight line to the 500-foot contour line of the Mayacamas Range in the northwestern corner of Section 28, T.7 N., R.5 W.;</P>
                <P>(8) Then proceeding along the 500-foot contour line in a generally northwesterly direction in T.7 N., R.5 W. through Sections 21, 20, 17, 18, 17, and 18 to the northwest portion of Section 7 where the 500-foot contour line intersects a southwestward straight line extension of the light-duty road known as Inglewood Avenue;</P>
                <P>(9) Thence in a straight line in a northeasterly direction along this extension of Inglewood Avenue to its intersection with the north fork of Bale Slough;</P>
                <P>(10) Thence in a southeasterly direction along the north fork of Bale Slough approximately 2,750 feet to its intersection with the end of the county road shown on the map as Zinfandel Avenue, known locally as Zinfandel Lane, near the 201-foot elevation marker;</P>
                <P>(11) Then in a northeasterly direction along Zinfandel Avenue (Zinfandel Lane) approximately 2.12 miles to the intersection of that road and Silverado Trail, then continuing northeasterly in a straight line to the 380-foot contour line;</P>
                <P>(12) Then following the 380-foot contour line southeasterly through Section 33 to the western border of Section 34, T.8 N., R.5 W., then following that section line north to the 500-foot contour line;</P>
                <P>(13) Then following the 500-foot contour line southeasterly to the western border of Section 2, T.7 N., R.5 W., then south along that section line past Conn Creek to its intersection with the 500-foot contour line northwest of the unnamed 832-foot peak;</P>
                <P>(14) Then continuing in a westerly direction and then a generally southeasterly direction along the 500-foot contour line through Sections 3, 2, 11 and 12 to the intersection of that contour line with the southern border of Section 12 (on Yountville map);</P>
                <P>(15) Then proceeding in a straight line in a westerly direction to the intersection of the Silverado Trail with Skellenger Lane, the point of beginning.</P>
                <CITA>[T.D. ATF-342, 58 FR 35876, July 2, 1993]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.134</SECTNO>
                <SUBJECT>Oakville.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Oakville.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundary of the Oakville viticultural area are two U.S.G.S. 7.5 minute series topographical maps of the 1:24,000 scale:</P>
                <P>(1) “Yountville Quadrangle, California,” edition of 1951, photorevised 1968.</P>
                <P>(2) “Rutherford Quadrangle, California,” edition of 1951, photorevised 1968, photoinspected 1973.</P>
                <P>(c) <E T="03">Boundary.</E> The Oakville viticultural area is located in Napa County in the State of California. The boundary is as follows:</P>
                <P>(1) Beginning on the Yountville quadrangle map at the point where the county road known as the Silverado Trail intersects Skellenger Lane, just outside the southwest corner of Section 12, Township 7 North (T.7 N.), Range 5 West (R.5 W.), the boundary proceeds in a southwesterly direction in a straight line approximately 1.7 miles along Skellenger Lane, past its intersection with Conn Creek Road, to the point of intersection with the main channel of the Napa River (on the Rutherford quadrangle map);</P>

                <P>(2) Then south along the center of the river bed approximately .4 miles to the point where an unnamed stream drains into the Napa River from the west;<PRTPAGE P="217"/>
                </P>
                <P>(3) Then along the unnamed stream in a generally northwesterly direction to its intersection with the west track of the Southern Pacific Railroad Track;</P>
                <P>(4) Then southeasterly along said railroad track 1,650 feet to a point which is approximately 435 feet north of the centerline of the entry road to Robert Mondavi Winery (shown on the map) to the southeast corner of Assessor's Parcel Number 27-250-14;</P>
                <P>(5) Thence southwesterly S 55°06′28″ W for 3,869 feet along the common boundary between Assessor's Parcel Numbers 27-250-14 and 27-280-50/51 to the southwest corner of Assessor's Parcel Number 27-250-14;</P>
                <P>(6) Thence northwesterly N 40°31′42″ W for 750 feet along the westerly property line of Assessor's Parcel Number 27-250-14;</P>
                <P>(7) Thence southwesterly S 51°00′ W in a straight line to the 500-foot contour line of the Mayacamas Range in the northwestern corner of Section 28, T.7 N., R.5 W.;</P>
                <P>(8) Then proceeding along the 500-foot contour line in a generally southeasterly direction through Sections 28, 29, 20, 29, 28, 29, 28, 33 and 34 of T.7 N., R.5 W. and Section 3 of T.6 N., R.5 W. to its intersection with the unnamed stream known locally as Hopper Creek near the middle of Section 3;</P>
                <P>(9) Then along the unnamed stream (Hopper Creek) southeasterly and, at the fork in Section 3, northeasterly along the stream to the point where the stream intersects with the unnamed dirt road in the northwest corner of Section 2, T.6 N., R.5 W;</P>
                <P>(10) Then proceed in a straight line to the light duty road to the immediate northeast in Section 2, then along the light duty road in a northeasterly direction to the point at which the road turns 90 degrees to the left;</P>
                <P>(11) Then proceed along the light duty road 625 feet, then proceed northeasterly (N 40°43′ E) in a straight line 1,350 feet, along the northern property line of Assessor's Parcel Number 27-380-08 (not shown on the map), to State Highway 29, then continuing in a straight line approximately .1 mile to the peak of the 320+ foot hill along the western edge of the Yountville Hills;</P>
                <P>(12) Then proceed due east to the second 300-foot contour line, then follow that contour line around the Yountville Hills to the north to the point at which the 300-foot contour line exits the Rutherford quadrangle map for the second time;</P>
                <P>(13) Then proceed (on the Yountville quadrangle map) in a straight line in a northeasterly direction approximately N 34°30′ E approximately 1,000 feet to the 90 degree bend in the unimproved dirt road shown on the map, then along that road, which coincides with a fence line (not shown on the map) to the intersection of Conn Creek and Rector Creek;</P>
                <P>(14) Then along Rector Creek to the northeast past the Silverado Trail to the Rector Reservoir spillway entrance, then proceed due north along the spillway of Rector Reservoir, then east and northeast along the shoreline of Rector Reservoir to the point where the first unnamed stream enters the Reservoir;</P>
                <P>(15) Thence follow the unnamed stream north and northeast to where it intersects an unimproved dirt road at the 1006-foot benchmark;</P>
                <P>(16) Then proceed in a straight line approximately .6 mile due west to the intersection of an unnamed stream, then follow said stream downslope to the 500-foot contour line, and along that contour line northwesterly through sections 18 and 13 to the intersection of the contour line with the southern border of Section 12 in T.7 N, R.5 W.;</P>
                <P>(17) Then proceed in a straight line in a westerly direction to the intersection of Skellenger Lane with the Silverado Trail, the point of beginning.</P>
                <CITA>[T.D. ATF-343, 58 FR 35884, July 2, 1993]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.135</SECTNO>
                <SUBJECT>Virginia's Eastern Shore.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Virginia's Eastern Shore.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the “Virginia's Eastern Shore” viticultural area are 3 U.S.G.S. Quadrangle (1:250,000 Series) maps. They are titled:</P>

                <P>(1) Eastville, VA.; N.C.; MD., 1946 (revised 1969).<PRTPAGE P="218"/>
                </P>
                <P>(2) Salisbury, MD.; DEL.; N.J.; VA., 1946 (revised 1969).</P>
                <P>(3) Richmond VA.; MD., 1973.</P>
                <P>(c) <E T="03">Boundary.</E> The Virginia's Eastern Shore viticultural area is located in Accomack and Northampton counties, Virginia. The boundary is as follows:</P>
                <P>(1) The beginning point is the intersection of the Virginia/Maryland border and Chincoteague Bay, near Greenbackville on the Salisbury, MD., U.S.G.S. map;</P>
                <P>(2) From the beginning point, the boundary follows the coastline in a southwesterly direction. Where there are marshes indicated on the U.S.G.S. maps, the boundry is the inland side of these marshes;</P>
                <P>(3) When the boundary reaches the southernmost point of the peninsula, on the Eastville, VA., U.S.G.S. map, the boundary turns and proceeds in a northwesterly direction, again following the coastline around Cherrystone Inlet on the Richmond, VA., U.S.G.S. map;</P>
                <P>(4) The boundary continues to follow the coastline and the inland side of any marshes indicated on the U.S.G.S. maps in a northeasterly direction, until it reaches the Virginia/Maryland border on the Eastville, VA., U.S.G.S. map;</P>
                <P>(5) The boundary then follows the Virginia/Maryland border back to the beginning point at Chincoteague Bay on the Salisbury, MD., U.S.G.S. map.</P>
                <CITA>[T.D. ATF-309, 56 FR 24, Jan. 2, 1991]</CITA>
              </SECTION>
              <SECTION>
                <SECTNO>§ 9.136</SECTNO>
                <SUBJECT>Texas Hill Country.</SUBJECT>
                <P>(a) <E T="03">Name.</E> The name of the viticultural area described in this section is “Texas Hill Country.”</P>
                <P>(b) <E T="03">Approved maps.</E> The appropriate maps for determining the boundaries of the “Texas Hill Country” viticultural area are 7 U.S.G.S. (scale 1:250,000) maps. They are titled:</P>
                <P>(1) Brownwood, Texas, 1954 (revised 1974);</P>
                <P>(2) Sonora, Texas, 1954 (revised 1978);</P>
                <P>(3) Llano, Texas, 1954 (revised 1975);</P>
                <P>(4) Austin, Texas, 1954 (revised 1974);</P>
                <P>(5) Del Rio, Texas, 1958 (revised 1969);</P>
                <P>(6) San Antonio, Texas, 1954 (revised 1980);</P>
                <P>(7) Seguin, Texas, 1953 (revised 1975).</P>
                <P>(c) <E T="03">Boundary.</E> The Texas Hill Country viticultural area is located in portions of McCulloch, San Saba, Lampasas, Burnet, Travis, Williamson, Llano, Mason, Menard, Kimble, Gillespie, Blanco, Hays, Kendall, Kerr, Edwards, Real, Bandera, Bexar, Comal, Guadalupe, Medina, and Uvalde counties, in the State of Texas. The boundary is as follows:</P>
                <P>