<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>40</CFRTITLE>
    <CFRTITLETEXT>Protection of Environment</CFRTITLETEXT>
    <VOL>16</VOL>
    <DATE>2007-07-01</DATE>
    <ORIGINALDATE>2007-07-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>Vehicle test procedures.</TITLE>
    <GRANULENUM>80.51</GRANULENUM>
    <HEADING>Section 80.51</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 40" SEQ="4">Protection of Environment</PARENT>
      <PARENT HEADING="CHAPTER I" SEQ="3">ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)</PARENT>
      <PARENT HEADING="SUBCHAPTER C" SEQ="2">AIR PROGRAMS (CONTINUED)</PARENT>
      <PARENT HEADING="PART 80" SEQ="1">REGULATION OF FUELS AND FUEL ADDITIVES</PARENT>
      <PARENT HEADING="Subpart D" SEQ="0">Reformulated Gasoline</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SECTION>
    <SECTNO>§ 80.51</SECTNO>
    <SUBJECT>Vehicle test procedures.</SUBJECT>
    <P>The test sequence applicable when augmenting the emission models through vehicle testing is as follows:</P>
    <P>(a) Prepare vehicles per § 80.50.</P>
    <P>(b) Initial preconditioning per § 80.52(a)(1). Vehicles shall be refueled randomly with the fuels required in § 80.49 when testing to augment the complex emission model.</P>
    <P>(c) Exhaust emissions tests, dynamometer procedure per 40 CFR 86.137-90 with:</P>
    <P>(1) Exhaust Benzene and 1,3-Butadiene emissions measured per § 80.55; and</P>
    <P>(2) Formaldehyde and Acetelaldehyde emissions measured per § 80.56.</P>
  </SECTION>
</CFRGRANULE>

