<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>40</CFRTITLE>
    <CFRTITLETEXT>Protection of Environment</CFRTITLETEXT>
    <VOL>18</VOL>
    <DATE>2007-07-01</DATE>
    <ORIGINALDATE>2007-07-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>Reference materials.</TITLE>
    <GRANULENUM>86.1</GRANULENUM>
    <HEADING>Section 86.1</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 40" SEQ="3">Protection of Environment</PARENT>
      <PARENT HEADING="CHAPTER I" SEQ="2">ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)</PARENT>
      <PARENT HEADING="SUBCHAPTER C" SEQ="1">AIR PROGRAMS (CONTINUED)</PARENT>
      <PARENT HEADING="PART 86" SEQ="0">CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SECTION>
    <SECTNO>§ 86.1</SECTNO>
    <SUBJECT>Reference materials.</SUBJECT>

    <P>(a) The documents in paragraph (b) of this section have been incorporated by reference. The incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be inspected at U.S. EPA, OAR, 401 M St., SW., Washington, DC 20460, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: <E T="03">http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.</E>
    </P>
    <P>(b) The following paragraphs and tables set forth the material that has been incorporated by reference in this part.</P>
    <P>(1) <E T="03">ASTM material.</E> The following table sets forth material from the American Society for Testing and Materials that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than this section, in which the matter is referenced. Copies of these materials may be obtained from American Society for Testing and <PRTPAGE P="160"/>Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.</P>
    <GPOTABLE CDEF="s150,r75" COLS="2" OPTS="L2">
      <BOXHD>
        <CHED H="1">Document number and name</CHED>
        <CHED H="1">40 CFR part 86 reference</CHED>
      </BOXHD>
      <ROW>
        <ENT I="01">ASTM E29-67 (Reapproved 1980), Standard Recommended Practice for Indicating Which Places of Figures Are To Be Considered Significant in Specified Limiting Values</ENT>
        <ENT>86.1105-87.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM E29-90, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications</ENT>
        <ENT>86.609-84; 86.609-96; 86.609-97; 86.609-98; 86.1009-84; 86.1009-96; 86.1442; 86.1708-99; 86.1709-99; 86.1710-99; 86.1728-99.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM D5186-91, Standard Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography</ENT>
        <ENT>86.113-07; 86.1313-91; 86.1313-94; 86.1313-98; 1313-2007.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM D2163-91, Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propane Concentrates by Gas Chromatography</ENT>
        <ENT>86.113-94; 86.1213-94; 86.1313-94.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM D1945-91, Standard Test Method for Analysis of Natural Gas By Gas Chromatography</ENT>
        <ENT>86.113-94; 86.513-94; 86.1213-94; 86.1313-94.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM E29-93a, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications</ENT>
        <ENT>86.098-15; 86.004-15; 86.007-11; 86.007-15; 86.1803-01; 86.1823-01; 86.1824-01; 86.1825-01; 86.1837-01.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM D2986-95a, (Reapproved 1999) Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test</ENT>
        <ENT>86.1310-2007.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM F1471-93, Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air-Filter System</ENT>
        <ENT>86.1310-2007.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ASTM D 975-04c Standard Specification for Diesel Fuel Oils</ENT>
        <ENT>86.1910, 86.213-11.</ENT>
      </ROW>
    </GPOTABLE>
    <P>(2) <E T="03">SAE material.</E> The following table sets forth material from the Society of Automotive Engineers that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than § 86.1, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from Society of Automotive Engineers International, 400 Commonwealth Dr., Warrendale, PA, 15096-0001.</P>
    <GPOTABLE CDEF="s50,r50" COLS="2" OPTS="L2">
      <BOXHD>
        <CHED H="1">Document No. and name</CHED>
        <CHED H="1">40 CFR part 86 reference</CHED>
      </BOXHD>
      <ROW>
        <ENT I="01">SAE J1349, June 1990, Engine Power Test Code—Spark Ignition and Compression Ignition</ENT>
        <ENT>86.094-8; 86.096-8</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1850 July 1995, Class B Data Communication Network Interface</ENT>
        <ENT>86.099-17; 86.1806-01</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1877, July 1994 Recommended Practice for Bar-Coded Vehicle Identification Number Label</ENT>
        <ENT>86.095-35; 86.1806-01</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1892 October 1993, Recommended Practice for Bar-Coded Vehicle Emission Configuration Label</ENT>
        <ENT>86.095-35; 86.1806-01</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-11, December 1994, Physical Layer-250K bits/s, Shielded Twisted Pair</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-13, July 1999, Off-Board Diagnostic Connector</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-21, July 1994, Data Link Layer</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-31, December 1997, Network Layer</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-71, May 1996, Vehicle Application Layer</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-73, February 1996, Application Layer-Diagnostics</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-81, July 1997, Recommended Practice for Serial Control and Communications Vehicle Network—Part 81—Network Management</ENT>
        <ENT>86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1962 January 1995, Diagnostic Connector</ENT>
        <ENT>86.099-17; 86.1806-01</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1979 July 1996, E/E Diagnostic Test Modes</ENT>
        <ENT>86.099-17; 86.1806-01</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J2012 July 1996, Recommended Practice for Diagnostic Trouble Code Definitions</ENT>
        <ENT>86.099-17; 86.1806-01</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE Recommended Practice J1151, December 1991, Methane Measurement Using Gas Chromatography, 1994 SAE Handbook—SAE International Cooperative Engineering Program, Volume 1: Materials, Fuels, Emissions, and Noise; Section 13 and page 170 (13.170)</ENT>
        <ENT>86.111-94; 86.1311-94.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE Recommended Practice J1937, November 1989, Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell</ENT>
        <ENT>86.1330-84; 86.1330-90.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1850, Class B Data Communication Network Interface. (Revised, May 2001)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <PRTPAGE P="161"/>
        <ENT I="01">SAE J1930, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms—Equivalent to ISO/TR 15031-2: April 30, 2002. (Revised, April 2002)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-11, Physical Layer—250K bits/s, Shielded Twisted Pair. (Revised, October 1999)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-13, Off-Board Diagnostic Connector. (July 1999)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-21, Data Link Layer. (Revised, April 2001)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-31, Network Layer. (Revised, December 1997)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-71, Vehicle Application Layer—J1939-71 (through 1999). (Revised, August 2002)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-73, Application Layer-Diagnostics. (Revised, June 2001)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1939-81, Recommended Practice for Serial Control and Communications Vehicle Network Part 81—Network Management. (July 1997)</ENT>
        <ENT>86.005-17; 86.1806-04;—86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1962, Diagnostic Connector—Equivalent to ISO/DIS 15031-3:December 14, 2001. (Revised, April 2002)</ENT>
        <ENT>86.005-17;86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1978, OBD II Scan Tool—Equivalent to ISO/DIS 15031-4; December 14, 2001. (Revised, April 2002)</ENT>
        <ENT>86.005-17;86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J1979, E/E Diagnostic Test Modes—Equivalent to ISO/DIS 15031-5: April 30, 2002. (Revised, April 2002)</ENT>
        <ENT>86.099-17;86.005-17; 86.1806-01; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE J2012, Diagnostic Trouble Code Definitions—Equivalent to ISO/DIS 15031-6: April 30, 2002. (Revised, April 2002,)</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE Recommended Practice J1930 (Revised, May, 1998), Electrical/ Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms</ENT>
        <ENT>86.096-38; 86.004-38; 86.007-38; 86.1808-01; 86.1808-07.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE Recommended Practice J1979 (Revised, September, 1997), E/E Diagnostic Test Modes</ENT>
        <ENT>86.096-38; 86.004-38; 86.007-38; 86.1808-01; 86.1808-07.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE Recommended Practice J2284-3 (May, 2001), High Speed CAN (HSC) for Vehicle Applications at 500 KBPS</ENT>
        <ENT>86.096-38; 86.004-38; 86.007-38; 86.1808-01; 86.1808-07.</ENT>
      </ROW>
      <ROW>
        <ENT I="01">SAE Recommended Practice J2534 (February, 2002), Recommended Practice for Pass-Thru Vehicle Programming</ENT>
        <ENT>86.096-38; 86.004-38; 86.007-38; 86.1808-01; 86.1808-07.</ENT>
      </ROW>
    </GPOTABLE>
    <P>(3) <E T="03">ANSI material.</E> The following table sets forth material from the American National Standards Institute that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than § 86.1, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from the American National Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036.</P>
    <GPOTABLE CDEF="s50,r50" COLS="2" OPTS="L2">
      <BOXHD>
        <CHED H="1">Document number and name</CHED>
        <CHED H="1">40 CFR part 86 reference</CHED>
      </BOXHD>
      <ROW>
        <ENT I="01">ANSI/AGA NGV1-1994, Standard for Compressed Natural Gas Vehicle (NGV) Fueling Connection Devices</ENT>
        <ENT>86.001-9; 86.004-9; 86.098-8; 86.099-8; 86.099-9; 86.1810-01</ENT>
      </ROW>
    </GPOTABLE>
    <P>(4) <E T="03">California regulatory requirements.</E> The following table sets forth California regulatory requirements that have been incorporated by reference. The first column lists the name and date of the material. The second column lists the sections of the part, other than § 86.1, in which the matter is referenced. The second column is presented for information only and may not be all-inclusive. Copies of these materials may be obtained from U.S. EPA, Office of Air and Radiation, 1200 Pennsylvania Ave., NW., Washington, DC 20460.</P>
    <GPOTABLE CDEF="s50,r50" COLS="2" OPTS="L2">
      <BOXHD>
        <CHED H="1">Document No. and name</CHED>
        <CHED H="1">40 CFR part 86 reference</CHED>
      </BOXHD>
      <ROW>
        <ENT I="01">California Regulatory Requirements Applicable to the “LEV II” Program, including:</ENT>
      </ROW>
      <ROW>
        <ENT I="03">1. California Exhaust Emission Standards and Test Procedures for 2003 and Subsequent Model Zero-Emission Vehicles and 2001 and Subsequent Model Hybrid Electric Vehicles, in the Passenger Car, Light-duty Truck and Medium-duty Vehicle Classes. August 5, 1999</ENT>
        <ENT>86.1806-01; 86.1811-04; 86.1844-01.</ENT>
      </ROW>
      <ROW>
        <ENT I="03">2. California Non-Methane Organic Gas Test Procedures. August 5, 1999</ENT>
        <ENT>86.1803-01; 86.1810-01; 86.1811-04.</ENT>
      </ROW>
      <ROW>
        <PRTPAGE P="162"/>
        <ENT I="11">California Regulatory Requirements Applicable to the National Low Emission Vehicle Program, October 1996.</ENT>
        <ENT>86.113-004; 86.612-97; 86.1012-97; 86.1702-99; 86.1708-99; 86.1709-99; 86.1717-99; 86.1735-99; 86.1771-99; 86.1775-99; 86.1776-99; 86.1777-99; Appendix XVI; Appendix XVII.</ENT>
      </ROW>
    </GPOTABLE>
    <P>(5) <E T="03">ISO material.</E> The following table sets forth material from the International Organization of Standardization that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than § 86.1, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from the International Organization for Standardization, Case Postale 56, CH-1211 Geneva 20, Switzerland.</P>
    <GPOTABLE CDEF="s100,xl100" COLS="2" OPTS="L2">
      <BOXHD>
        <CHED H="1">Document No. and name</CHED>
        <CHED H="1">40 CFR part 86 reference</CHED>
      </BOXHD>
      <ROW>
        <ENT I="01">ISO 9141-2, February 1, 1994, Road vehicles—Diagnostic systems—Part 2: CARB requirements for interchange of digital information</ENT>
        <ENT>86.099-17; 86.1806-01; 86.1806-04; 86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ISO 14230-4:2000(E) “Road vehicles—Diagnostic systems—KWP 2000 requirements for Emission-related systems”, (June 1, 2000)</ENT>
        <ENT>86.099-17; 86.1806-01; 86.1806-04; 86.005-17; 86.1806-05</ENT>
      </ROW>
      <ROW>
        <ENT I="01">ISO 15765-4.3:2001, December 14, 2001, Road Vehicles—Diagnostics on Controller Area Network (CAN)—Part 4: Requirements for emission-related systems</ENT>
        <ENT>86.005-17; 86.1806-04; 86.1806-05</ENT>
      </ROW>
    </GPOTABLE>
    <P>(6) <E T="03">NIST material.</E> The following table lists material from the National Institute of Standards and Technology that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the sections of this part where we reference it. Anyone may purchase copies of these materials from the Government Printing Office, Washington, DC 20402 or download them from the Internet at <E T="03">http://www.nist.gov/.</E>
    </P>
    <GPOTABLE CDEF="s50,8" COLS="2" OPTS="L1">
      <BOXHD>
        <CHED H="1">Document No. and name</CHED>
        <CHED H="1">Part 86<LI>reference</LI>
        </CHED>
      </BOXHD>
      <ROW>
        <ENT I="01">NIST Special Publication 811, Guide for the Use of the International System of Units (SI), 1995 Edition.</ENT>
        <ENT>86.1901</ENT>
      </ROW>
    </GPOTABLE>
    <CITA>[58 FR 16019, Mar. 24, 1993, as amended at 58 FR 58417, Nov. 1, 1993; 59 FR 48491, 59 FR 48491, Sept. 21, 1994; 59 FR 50073, Sept. 30, 1994; 60 FR 43887, Aug. 23, 1995; 61 FR 54877, Oct. 22, 1996; 62 FR 31232, June 6, 1997; 62 FR 47119, Sept. 5, 1997; 62 FR 54715, Oct. 21, 1997; 63 FR 965, Jan. 7, 1998; 63 FR 70694, Dec. 22, 1998; 64 FR 23920, May 4, 1999; 65 FR 6848, Feb. 10, 2000; 65 FR 59944, Oct. 6, 2000; 66 FR 5159, Jan. 18, 2001; 68 FR 35798, June 17, 2003; 68 FR 35798, June 17, 2003; 70 FR 34619, June 14, 2005; 71 FR 77919, Dec. 27, 2006]</CITA>
  </SECTION>
</CFRGRANULE>

