July 18, 2008 CODE OF FEDERAL REGULATIONS 40 Parts 260 to 265 Revised as of July 1, 2008 Protection of Environment Containing a codification of documents of general applicability and future effect As of July 1, 2008 With Ancillaries

Published by

Office of the Federal Register

National Archives and Records

Administration

 A Special Edition of the Federal Register U.S. GOVERNMENT OFFICIAL EDITION NOTICE Legal Status and Use of Seals and Logos e:\seals\archives.ai

The seal of the National Archives and Records Administration (NARA) authenticates the Code of Federal Regulations (CFR) as the official codification of Federal regulations established under the Federal Register Act. Under the provisions of 44 U.S.C. 1507, the contents of the CFR, a special edition of the Federal Register, shall be judicially noticed. The CFR is prima facie evidence of the original documents published in the Federal Register (44 U.S.C. 1510).

It is prohibited to use NARA's official seal and the stylized Code of Federal Regulations logo on any republication of this material without the express, written permission of the Archivist of the United States or the Archivist's designee. Any person using NARA's official seals and logos in a manner inconsistent with the provisions of 36 CFR part 1200 is subject to the penalties specified in 18 U.S.C. 506, 701, and 1017.

Use of ISBN Prefix

This is the Official U.S. Government edition of this publication and is herein identified to certify its authenticity. Use of the 0-16 ISBN prefix is for U.S. Government Printing Office Official Editions only. The Superintendent of Documents of the U.S. Government Printing Office requests that any reprinted edition clearly be labeled as a copy of the authentic work with a new ISBN.

e:\seals\gpologo.eps

U . S . G O V E R N M E N T P R I N T I N G O F F I C E

U.S. Superintendent of Documents • Washington, DC 20402-0001

http://bookstore.gpo.gov

Phone: toll-free (866) 512-1800; DC area (202) 512-1800

 Table of Contents Page Explanation v Title 40: Chapter I—Environmental Protection Agency (Continued) 3 Finding Aids: Material Approved for Incorporation by Reference 701 Table of CFR Titles and Chapters 705 Alphabetical List of Agencies Appearing in the CFR 725 List of CFR Sections Affected 735

Cite this Code:CFR

To cite the regulations in this volume use title, part and section number. Thus, 40 CFR 260.1 refers to title 40, part 260, section 1. Explanation

The Code of Federal Regulations is a codification of the general and permanent rules published in the Federal Register by the Executive departments and agencies of the Federal Government. The Code is divided into 50 titles which represent broad areas subject to Federal regulation. Each title is divided into chapters which usually bear the name of the issuing agency. Each chapter is further subdivided into parts covering specific regulatory areas.

Each volume of the Code is revised at least once each calendar year and issued on a quarterly basis approximately as follows:

Title 1 through Title 16

as of January 1

Title 17 through Title 27

as of April 1

Title 28 through Title 41

as of July 1

Title 42 through Title 50

as of October 1

The appropriate revision date is printed on the cover of each volume.

LEGAL STATUS

The contents of the Federal Register are required to be judicially noticed (44 U.S.C. 1507). The Code of Federal Regulations is prima facie evidence of the text of the original documents (44 U.S.C. 1510).

 HOW TO USE THE CODE OF FEDERAL REGULATIONS

The Code of Federal Regulations is kept up to date by the individual issues of the Federal Register. These two publications must be used together to determine the latest version of any given rule.

To determine whether a Code volume has been amended since its revision date (in this case, July 1, 2008), consult the “List of CFR Sections Affected (LSA),” which is issued monthly, and the “Cumulative List of Parts Affected,” which appears in the Reader Aids section of the daily Federal Register. These two lists will identify the Federal Register page number of the latest amendment of any given rule.

 EFFECTIVE AND EXPIRATION DATES

Each volume of the Code contains amendments published in the Federal Register since the last revision of that volume of the Code. Source citations for the regulations are referred to by volume number and page number of the Federal Register and date of publication. Publication dates and effective dates are usually not the same and care must be exercised by the user in determining the actual effective date. In instances where the effective date is beyond the cut-off date for the Code a note has been inserted to reflect the future effective date. In those instances where a regulation published in the Federal Register states a date certain for expiration, an appropriate note will be inserted following the text.

 OMB CONTROL NUMBERS

The Paperwork Reduction Act of 1980 (Pub. L. 96-511) requires Federal agencies to display an OMB control number with their information collection request. Many agencies have begun publishing numerous OMB control numbers as amendments to existing regulations in the CFR. These OMB numbers are placed as close as possible to the applicable recordkeeping or reporting requirements.

 OBSOLETE PROVISIONS

Provisions that become obsolete before the revision date stated on the cover of each volume are not carried. Code users may find the text of provisions in effect on a given date in the past by using the appropriate numerical list of sections affected. For the period before January 1, 1986, consult either the List of CFR Sections Affected, 1949-1963, 1964-1972, or 1973-1985, published in seven separate volumes. For the period beginning January 1, 1986, a “List of CFR Sections Affected” is published at the end of each CFR volume.

 INCORPORATION BY REFERENCE

What is incorporation by reference? Incorporation by reference was established by statute and allows Federal agencies to meet the requirement to publish regulations in the Federal Register by referring to materials already published elsewhere. For an incorporation to be valid, the Director of the Federal Register must approve it. The legal effect of incorporation by reference is that the material is treated as if it were published in full in the Federal Register (5 U.S.C. 552(a)). This material, like any other properly issued regulation, has the force of law.

What is a proper incorporation by reference? The Director of the Federal Register will approve an incorporation by reference only when the requirements of 1 CFR part 51 are met. Some of the elements on which approval is based are:

(a) The incorporation will substantially reduce the volume of material published in the Federal Register.

(b) The matter incorporated is in fact available to the extent necessary to afford fairness and uniformity in the administrative process.

(c) The incorporating document is drafted and submitted for publication in accordance with 1 CFR part 51.

Properly approved incorporations by reference in this volume are listed in the Finding Aids at the end of this volume.

What if the material incorporated by reference cannot be found? If you have any problem locating or obtaining a copy of material listed in the Finding Aids of this volume as an approved incorporation by reference, please contact the agency that issued the regulation containing that incorporation. If, after contacting the agency, you find the material is not available, please notify the Director of the Federal Register, National Archives and Records Administration, Washington DC 20408, or call 202-741-6010.

 CFR INDEXES AND TABULAR GUIDES

A subject index to the Code of Federal Regulations is contained in a separate volume, revised annually as of January 1, entitled CFR Index and Finding Aids. This volume contains the Parallel Table of Statutory Authorities and Agency Rules (Table I). A list of CFR titles, chapters, and parts and an alphabetical list of agencies publishing in the CFR are also included in this volume.

An index to the text of “Title 3—The President” is carried within that volume.

The Federal Register Index is issued monthly in cumulative form. This index is based on a consolidation of the “Contents” entries in the daily Federal Register.

A List of CFR Sections Affected (LSA) is published monthly, keyed to the revision dates of the 50 CFR titles.

 REPUBLICATION OF MATERIAL

There are no restrictions on the republication of material appearing in the Code of Federal Regulations.

 INQUIRIES

For a legal interpretation or explanation of any regulation in this volume, contact the issuing agency. The issuing agency's name appears at the top of odd-numbered pages.

For inquiries concerning CFR reference assistance, call 202-741-6000 or write to the Director, Office of the Federal Register, National Archives and Records Administration, Washington, DC 20408 or e-mail fedreg.info@nara.gov.

 SALES

The Government Printing Office (GPO) processes all sales and distribution of the CFR. For payment by credit card, call toll-free, 866-512-1800, or DC area, 202-512-1800, M-F 8 a.m. to 4 p.m. e.s.t. or fax your order to 202-512-2250, 24 hours a day. For payment by check, write to: US Government Printing Office - New Orders, P.O. Box 979050, St. Louis, MO 63197-9000. For GPO Customer Service call 202-512-1803.

 ELECTRONIC SERVICES

The full text of the Code of Federal Regulations, the LSA (List of CFR Sections Affected), The United States Government Manual, the Federal Register, Public Laws, Public Papers, Weekly Compilation of Presidential Documents and the Privacy Act Compilation are available in electronic format at www.gpoaccess.gov/nara (“GPO Access”). For more information, contact Electronic Information Dissemination Services, U.S. Government Printing Office. Phone 202-512-1530, or 888-293-6498 (toll-free). E-mail, gpoaccess@gpo.gov.

The Office of the Federal Register also offers a free service on the National Archives and Records Administration's (NARA) World Wide Web site for public law numbers, Federal Register finding aids, and related information. Connect to NARA's web site at www.archives.gov/federal-register. The NARA site also contains links to GPO Access.

Raymond A. Mosley,

Director,

Office of the Federal Register.

July 1, 2008.

THIS TITLE

Title 40—Protection of Environment is composed of thirty-one volumes. The parts in these volumes are arranged in the following order: parts 1-49, parts 50-51, part 52 (52.01-52.1018), part 52 (52.1019-End), parts 53-59, part 60 (60.1-End), part 60 (Appendices), parts 61-62, part 63 (63.1-63.599), part 63 (63.600-63.1199), part 63 (63.1200-63.1439), part 63 (63.1440-63.6175), part 63 (63.6580-63.8830), part 63 (63.8980-End) parts 64-71, parts 72-80, parts 81-84, part 85-§ 86.599-99, part 86 (86.600-1-End), parts 87-99, parts 100-135, parts 136-149, parts 150-189, parts 190-259, parts 260-265, parts 266-299, parts 300-399, parts 400-424, parts 425-699, parts 700-789, and part 790 to End. The contents of these volumes represent all current regulations codified under this title of the CFR as of July 1, 2008.

Chapter I—Environmental Protection Agency appears in all thirty-one volumes. Regulations issued by the Council on Environmental Quality, including an Index to Parts 1500 through 1508, appear in the volume containing part 790 to End. The OMB control numbers for title 40 appear in § 9.1 of this chapter.

For this volume, Michele Bugenhagen was Chief Editor. The Code of Federal Regulations publication program is under the direction of Michael L. White, assisted by Ann Worley.

 <LRH>40 CFR Ch. I (7-1-08 Edition)</LRH> <RRH>Environmental Protection Agency</RRH> <CFRTITLE> <TITLEHD> <PRTPAGE P="1"/> <HD SOURCE="HED">Title 40—Protection of Environment</HD> <P>(This book contains parts 260 to 265)</P> </TITLEHD> <CFRTOC> <PTHD>Part</PTHD> <CHAPTI> <SUBJECT> <E T="04">chapter i</E>—Environmental Protection Agency (Continued)</SUBJECT> <PG>260</PG> </CHAPTI> </CFRTOC> </CFRTITLE> <CHAPTER> <TOC> <TOCHD> <PRTPAGE P="3"/> <HD SOURCE="HED">CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)</HD> </TOCHD> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to chapter I appear at 65 FR 47324, 47325, Aug. 2, 2000, and 66 FR 34375, 34376, June 28, 2001.</P> </EDNOTE> <SUBCHAP> <HD SOURCE="HED">SUBCHAPTER I—SOLID WASTES (CONTINUED)</HD> </SUBCHAP> <PTHD>Part</PTHD> <PGHD>Page</PGHD> <CHAPTI> <PT>260</PT> <SUBJECT>Hazardous waste management system: General</SUBJECT> <PG>5</PG> <PT>261</PT> <SUBJECT>Identification and listing of hazardous waste</SUBJECT> <PG>30</PG> <PT>262</PT> <SUBJECT>Standards applicable to generators of hazardous waste</SUBJECT> <PG>205</PG> <PT>263</PT> <SUBJECT>Standards applicable to transporters of hazardous waste</SUBJECT> <PG>251</PG> <PT>264</PT> <SUBJECT>Standards for owners and operators of hazardous waste treatment, storage, and disposal facilities</SUBJECT> <PG>255</PG> <PT>265</PT> <SUBJECT>Interim status standards for owners and operators of hazardous waste treatment, storage, and disposal facilities</SUBJECT> <PG>503</PG> </CHAPTI> </TOC> <SUBCHAP TYPE="N"> <PRTPAGE P="5"/> <HD SOURCE="HED">SUBCHAPTER I—SOLID WASTES (CONTINUED)</HD> <PART> <EAR>Pt. 260</EAR> <HD SOURCE="HED">PART 260—HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—General</HD> <SECHD>Sec.</SECHD> <SECTNO>260.1</SECTNO> <SUBJECT>Purpose, scope, and applicability.</SUBJECT> <SECTNO>260.2</SECTNO> <SUBJECT>Availability of information; confidentiality of information.</SUBJECT> <SECTNO>260.3</SECTNO> <SUBJECT>Use of number and gender.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Definitions</HD> <SECTNO>260.10</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>260.11</SECTNO> <SUBJECT>References.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Rulemaking Petitions</HD> <SECTNO>260.20</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>260.21</SECTNO> <SUBJECT>Petitions for equivalent testing or analytical methods.</SUBJECT> <SECTNO>260.22</SECTNO> <SUBJECT>Petitions to amend part 261 to exclude a waste produced at a particular facility.</SUBJECT> <SECTNO>260.23</SECTNO> <SUBJECT>Petitions to amend 40 CFR part 273 to include additional hazardous wastes.</SUBJECT> <SECTNO>260.30</SECTNO> <SUBJECT>Variances from classification as a solid waste.</SUBJECT> <SECTNO>260.31</SECTNO> <SUBJECT>Standards and criteria for variances from classification as a solid waste.</SUBJECT> <SECTNO>260.32</SECTNO> <SUBJECT>Variances to be classified as a boiler.</SUBJECT> <SECTNO>260.33</SECTNO> <SUBJECT>Procedures for variances from classification as a solid waste or to be classified as a boiler.</SUBJECT> <SECTNO>260.40</SECTNO> <SUBJECT>Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.</SUBJECT> <SECTNO>260.41</SECTNO> <SUBJECT>Procedures for case-by-case regulation of hazardous waste recycling activities.</SUBJECT> <APP>Appendix I to Part 260—Overview of Subtitle C Regulations</APP> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>42 U.S.C. 6905, 6912(a), 6921-6927, 6930, 6934, 6935, 6937, 6938, 6939, and 6974.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>45 FR 33073, May 19, 1980, unless otherwise noted.</P> </SOURCE> <EFFDNOT> <HD SOURCE="HED">Effective Date Note:</HD> <P>The reporting or recordkeeping provisions included in the final rule published at 47 FR 32274, July 26, 1982, will be submitted for approval to the Office of Management and Budget (OMB), and will not become effective until OMB approval has been obtained. EPA will publish a notice of the effective date of the reporting and recordkeeping provisions of this rule after it obtains OMB approval.</P> </EFFDNOT> <SUBPART> <HD SOURCE="HED">Subpart A—General</HD> <SECTION> <SECTNO>§ 260.1</SECTNO> <SUBJECT>Purpose, scope, and applicability.</SUBJECT> <P>(a) This part provides definitions of terms, general standards, and overview information applicable to parts 260 through 265 and 268 of this chapter.</P> <P>(b) In this part: (1) Section 260.2 sets forth the rules that EPA will use in making information it receives available to the public and sets forth the requirements that generators, transporters, or owners or operators of treatment, storage, or disposal facilities must follow to assert claims of business confidentiality with respect to information that is submitted to EPA under parts 260 through 265 and 268 of this chapter.</P> <P>(2) Section 260.3 establishes rules of grammatical construction for parts 260 through 265 and 268 of this chapter.</P> <P>(3) Section 260.10 defines terms which are used in parts 260 through 265 and 268 of this chapter.</P> <P>(4) Section 260.20 establishes procedures for petitioning EPA to amend, modify, or revoke any provision of parts 260 through 265 and 268 of this chapter and establishes procedures governing EPA's action on such petitions.</P> <P>(5) Section 260.21 establishes procedures for petitioning EPA to approve testing methods as equivalent to those prescribed in parts 261, 264, or 265 of this chapter.</P> <P>(6) Section 260.22 establishes procedures for petitioning EPA to amend subpart D of part 261 to exclude a waste from a particular facility.</P> <CITA>[45 FR 33073, May 19, 1980, as amended at 51 FR 40636, Nov. 7, 1986]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.2</SECTNO> <SUBJECT>Availability of information; confidentiality of information.</SUBJECT> <P>(a) Any information provided to EPA under parts 260 through 265 and 268 of this chapter will be made available to the public to the extent and in the manner authorized by the Freedom of Information Act, 5 U.S.C. section 552, section 3007(b) of RCRA and EPA regulations implementing the Freedom of <PRTPAGE P="6"/>Information Act and section 3007(b), part 2 of this chapter, as applicable.</P> <P>(b) Any person who submits information to EPA in accordance with parts 260 through 266 and 268 of this chapter may assert a claim of business confidentiality covering part or all of that information by following the procedures set forth in § 2.203(b) of this chapter. Information covered by such a claim will be disclosed by EPA only to the extent, and by means of the procedures, set forth in part 2, subpart B, of this chapter except that information required by § 262.53(a) and § 262.83 that is submitted in a notification of intent to export a hazardous waste will be provided to the U.S. Department of State and the appropriate authorities in the transit and receiving or importing countries regardless of any claims of confidentiality. However, if no such claim accompanies the information when it is received by EPA, it may be made available to the public without further notice to the person submitting it.</P> <CITA>[45 FR 33073, May 19, 1980, as amended at 51 FR 28682, Aug. 8, 1986; 51 FR 40636, Nov. 7, 1986; 61 FR 16309, Apr. 12, 1996]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.3</SECTNO> <SUBJECT>Use of number and gender.</SUBJECT> <P>As used in parts 260 through 265 and 268 of this chapter:</P> <P>(a) Words in the masculine gender also include the feminine and neuter genders; and</P> <P>(b) Words in the singular include the plural; and</P> <P>(c) Words in the plural include the singular.</P> <CITA>[45 FR 33073, May 19, 1980, as amended at 51 FR 40636, Nov. 7, 1986]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Definitions</HD> <SECTION> <SECTNO>§ 260.10</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>When used in parts 260 through 273 of this chapter, the following terms have the meanings given below:</P> <P> <E T="03">Above ground tank</E> means a device meeting the definition of “tank” in § 260.10 and that is situated in such a way that the entire surface area of the tank is completely above the plane of the adjacent surrounding surface and the entire surface area of the tank (including the tank bottom) is able to be visually inspected.</P> <P> <E T="03">Act</E> or <E T="03">RCRA</E> means the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act of 1976, as amended, 42 U.S.C. section 6901 et seq.</P> <P> <E T="03">Active life</E> of a facility means the period from the initial receipt of hazardous waste at the facility until the Regional Administrator receives certification of final closure.</P> <P> <E T="03">Active portion</E> means that portion of a facility where treatment, storage, or disposal operations are being or have been conducted after the effective date of part 261 of this chapter and which is not a closed portion. (See also “closed portion” and “inactive portion”.)</P> <P> <E T="03">Administrator</E> means the Administrator of the Environmental Protection Agency, or his designee.</P> <P> <E T="03">Ancillary equipment</E> means any device including, but not limited to, such -devices as piping, fittings, flanges, valves, and pumps, that is used to distribute, meter, or control the flow of hazardous waste from its point of generation to a storage or treatment tank(s), between hazardous waste storage and treatment tanks to a point of disposal onsite, or to a point of shipment for disposal off-site.</P> <P> <E T="03">Aquifer</E> means a geologic formation, group of formations, or part of a formation capable of yielding a significant amount of ground water to wells or springs.</P> <P> <E T="03">Authorized representative</E> means the person responsible for the overall operation of a facility or an operational unit (i.e., part of a facility), e.g., the plant manager, superintendent or person of equivalent responsibility.</P> <P> <E T="03">Battery</E> means a device consisting of one or more electrically connected electrochemical cells which is designed to receive, store, and deliver electric energy. An electrochemical cell is a system consisting of an anode, cathode, and an electrolyte, plus such connections (electrical and mechanical) as may be needed to allow the cell to deliver or receive electrical energy. The term battery also includes an intact, unbroken battery from which the electrolyte has been removed.<PRTPAGE P="7"/> </P> <P> <E T="03">Boiler</E> means an enclosed device using controlled flame combustion and having the following characteristics:</P> <P>(1)(i) The unit must have physical provisions for recovering and exporting thermal energy in the form of steam, heated fluids, or heated gases; and</P> <P>(ii) The unit's combustion chamber and primary energy recovery sections(s) must be of integral design. To be of integral design, the combustion chamber and the primary energy recovery section(s) (such as waterwalls and superheaters) must be physically formed into one manufactured or assembled unit. A unit in which the combustion chamber and the primary energy recovery section(s) are joined only by ducts or connections carrying flue gas is not integrally designed; however, secondary energy recovery equipment (such as economizers or air preheaters) need not be physically formed into the same unit as the combustion chamber and the primary energy recovery section. The following units are not precluded from being boilers solely because they are not of integral design: process heaters (units that transfer energy directly to a process stream), and fluidized bed combustion units; and</P> <P>(iii) While in operation, the unit must maintain a thermal energy recovery efficiency of at least 60 percent, calculated in terms of the recovered energy compared with the thermal value of the fuel; and</P> <P>(iv) The unit must export and utilize at least 75 percent of the recovered energy, calculated on an annual basis. In this calculation, no credit shall be given for recovered heat used internally in the same unit. (Examples of internal use are the preheating of fuel or combustion air, and the driving of induced or forced draft fans or feedwater pumps); or</P> <P>(2) The unit is one which the Regional Administrator has determined, on a case-by-case basis, to be a boiler, after considering the standards in § 260.32.</P> <P> <E T="03">Carbon regeneration unit</E> means any enclosed thermal treatment device used to regenerate spent activated carbon.</P> <P> <E T="03">Cathode ray tube or CRT</E> means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A used, intact CRT means a CRT whose vacuum has not been released. A used, broken CRT means glass removed from its housing or casing whose vacuum has been released.</P> <P> <E T="03">Certification</E> means a statement of professional opinion based upon knowledge and belief.</P> <P> <E T="03">Closed portion</E> means that portion of a facility which an owner or operator has closed in accordance with the approved facility closure plan and all applicable closure requirements. (See also “active portion” and “inactive portion”.)</P> <P> <E T="03">Component</E> means either the tank or ancillary equipment of a tank system.</P> <P> <E T="03">Confined aquifer</E> means an aquifer bounded above and below by impermeable beds or by beds of distinctly lower permeability than that of the aquifer itself; an aquifer containing confined ground water.</P> <P> <E T="03">Container</E> means any portable device in which a material is stored, transported, treated, disposed of, or otherwise handled.</P> <P> <E T="03">Containment building</E> means a hazardous waste management unit that is used to store or treat hazardous waste under the provisions of subpart DD of parts 264 or 265 of this chapter.</P> <P> <E T="03">Contingency plan</E> means a document setting out an organized, planned, and coordinated course of action to be followed in case of a fire, explosion, or release of hazardous waste or hazardous waste constituents which could threaten human health or the environment.</P> <P> <E T="03">Corrosion expert</E> means a person who, by reason of his knowledge of the physical sciences and the principles of engineering and mathematics, acquired by a professional education and related practical experience, is qualified to engage in the practice of corrosion control on buried or submerged metal piping systems and metal tanks. Such a person must be certified as being qualified by the National Association of Corrosion Engineers (NACE) or be a registered professional engineer who has certification or licensing that includes education and experience in corrosion control on buried or submerged metal piping systems and metal tanks.</P> <P> <E T="03">CRT collector</E> means a person who receives used, intact CRTs for recycling, repair, resale, or donation.<PRTPAGE P="8"/> </P> <P> <E T="03">CRT glass manufacturer</E> means an operation or part of an operation that uses a furnace to manufacture CRT glass.</P> <P> <E T="03">CRT processing</E> means conducting all of the following activities:</P> <P>(1) Receiving broken or intact CRTs; and</P> <P>(2) Intentionally breaking intact CRTs or further breaking or separating broken CRTs; and</P> <P>(3) Sorting or otherwise managing glass removed from CRT monitors.</P> <P> <E T="03">Designated facility</E> means:</P> <P>(1) A hazardous waste treatment, storage, or disposal facility which:</P> <P>(i) Has received a permit (or interim status) in accordance with the requirements of parts 270 and 124 of this chapter;</P> <P>(ii) Has received a permit (or interim status) from a State authorized in accordance with part 271 of this chapter; or</P> <P>(iii) Is regulated under § 261.6(c)(2) or subpart F of part 266 of this chapter; and</P> <P>(iv) That has been designated on the manifest by the generator pursuant to § 262.20.</P> <P>(2) <E T="03">Designated facility</E> also means a generator site designated on the manifest to receive its waste as a return shipment from a facility that has rejected the waste in accordance with § 264.72(f) or § 265.72(f) of this chapter.</P> <P>(3) If a waste is destined to a facility in an authorized State which has not yet obtained authorization to regulate that particular waste as hazardous, then the designated facility must be a facility allowed by the receiving State to accept such waste.</P> <P> <E T="03">Destination facility</E> means a facility that treats, disposes of, or recycles a particular category of universal waste, except those management activities described in paragraphs (a) and (c) of §§ 273.13 and 273.33 of this chapter. A facility at which a particular category of universal waste is only accumulated, is not a destination facility for purposes of managing that category of universal waste.</P> <P> <E T="03">Dike</E> means an embankment or ridge of either natural or man-made materials used to prevent the movement of liquids, sludges, solids, or other materials.</P> <P> <E T="03">Dioxins and furans (D/F)</E> means tetra, penta, hexa, hepta, and octa-chlorinated dibenzo dioxins and furans.</P> <P> <E T="03">Discharge</E> or <E T="03">hazardous waste discharge</E> means the accidental or intentional spilling, leaking, pumping, pouring, emitting, emptying, or dumping of hazardous waste into or on any land or water.</P> <P> <E T="03">Disposal</E> means the discharge, deposit, injection, dumping, spilling, leaking, or placing of any solid waste or hazardous waste into or on any land or water so that such solid waste or hazardous waste or any constituent thereof may enter the environment or be emitted into the air or discharged into any waters, including ground waters.</P> <P> <E T="03">Disposal facility</E> means a facility or part of a facility at which hazardous waste is intentionally placed into or on any land or water, and at which waste will remain after closure. The term disposal facility does not include a corrective action management unit into which remediation wastes are placed.</P> <P> <E T="03">Drip pad</E> is an engineered structure consisting of a curbed, free-draining base, constructed of non-earthen materials and designed to convey preservative kick-back or drippage from treated wood, precipitation, and surface water run-on to an associated collection system at wood preserving plants.</P> <P> <E T="03">Elementary neutralization unit</E> means a device which:</P> <P>(1) Is used for neutralizing wastes that are hazardous only because they exhibit the corrosivity characteristic defined in § 261.22 of this chapter, or they are listed in subpart D of part 261 of the chapter only for this reason; and</P> <P>(2) Meets the definition of tank, tank system, container, transport vehicle, or vessel in § 260.10 of this chapter.</P> <P> <E T="03">EPA hazardous waste number</E> means the number assigned by EPA to each hazardous waste listed in part 261, subpart D, of this chapter and to each characteristic identified in part 261, subpart C, of this chapter.</P> <P> <E T="03">EPA identification number</E> means the number assigned by EPA to each generator, transporter, and treatment, storage, or disposal facility.</P> <P> <E T="03">EPA region</E> means the states and territories found in any one of the following ten regions:</P> <EXTRACT> <PRTPAGE P="9"/> <FP SOURCE="FP-1">Region I—Maine, Vermont, New Hampshire, Massachusetts, Connecticut, and Rhode Island.</FP> <FP SOURCE="FP-1">Region II—New York, New Jersey, Commonwealth of Puerto Rico, and the U.S. Virgin Islands.</FP> <FP SOURCE="FP-1">Region III—Pennsylvania, Delaware, Maryland, West Virginia, Virginia, and the District of Columbia.</FP> <FP SOURCE="FP-1">Region IV—Kentucky, Tennessee, North Carolina, Mississippi, Alabama, Georgia, South Carolina, and Florida.</FP> <FP SOURCE="FP-1">Region V—Minnesota, Wisconsin, Illinois, Michigan, Indiana and Ohio.</FP> <FP SOURCE="FP-1">Region VI—New Mexico, Oklahoma, Arkansas, Louisiana, and Texas.</FP> <FP SOURCE="FP-1">Region VII—Nebraska, Kansas, Missouri, and Iowa.</FP> <FP SOURCE="FP-1">Region VIII—Montana, Wyoming, North Dakota, South Dakota, Utah, and Colorado.</FP> <FP SOURCE="FP-1">Region IX—California, Nevada, Arizona, Hawaii, Guam, American Samoa, Commonwealth of the Northern Mariana Islands.</FP> <FP SOURCE="FP-1">Region X—Washington, Oregon, Idaho, and Alaska.</FP> </EXTRACT> <P> <E T="03">Equivalent method</E> means any testing or analytical method approved by the Administrator under §§ 260.20 and 260.21.</P> <P> <E T="03">Existing hazardous waste management (HWM) facility</E> or <E T="03">existing facility</E> means a facility which was in operation or for which construction commenced on or before November 19, 1980. A facility has commenced construction if:</P> <P>(1) The owner or operator has obtained the Federal, State and local approvals or permits necessary to begin physical construction; and either</P> <P>(2)(i) A continuous on-site, physical construction program has begun; or</P> <P>(ii) The owner or operator has entered into contractual obligations—which cannot be cancelled or modified without substantial loss—for physical construction of the facility to be completed within a reasonable time.</P> <P> <E T="03">Existing portion</E> means that land surface area of an existing waste management unit, included in the original Part A permit application, on which wastes have been placed prior to the issuance of a permit.</P> <P> <E T="03">Existing tank system</E> or <E T="03">existing component</E> means a tank system or component that is used for the storage or treatment of hazardous waste and that is in operation, or for which installation has commenced on or prior to July 14, 1986. Installation will be considered to have commenced if the owner or operator has obtained all Federal, State, and local approvals or permits necessary to begin physical construction of the site or installation of the tank system and if either (1) a continuous on-site physical construction or installation program has begun, or (2) the owner or operator has entered into contractual obligations—which cannot be canceled or modified without substantial loss—for physical construction of the site or installation of the tank system to be completed within a reasonable time.</P> <P> <E T="03">Explosives or munitions emergency</E> means a situation involving the suspected or detected presence of unexploded ordnance (UXO), damaged or deteriorated explosives or munitions, an improvised explosive device (IED), other potentially explosive material or device, or other potentially harmful military chemical munitions or device, that creates an actual or potential imminent threat to human health, including safety, or the environment, including property, as determined by an explosives or munitions emergency response specialist. Such situations may require immediate and expeditious action by an explosives or munitions emergency response specialist to control, mitigate, or eliminate the threat.</P> <P> <E T="03">Explosives or munitions emergency response</E> means all immediate response activities by an explosives and munitions emergency response specialist to control, mitigate, or eliminate the actual or potential threat encountered during an explosives or munitions emergency. An explosives or munitions emergency response may include in-place render-safe procedures, treatment or destruction of the explosives or munitions and/or transporting those items to another location to be rendered safe, treated, or destroyed. Any reasonable delay in the completion of an explosives or munitions emergency response caused by a necessary, unforeseen, or uncontrollable circumstance will not terminate the explosives or munitions emergency. Explosives and munitions emergency responses can occur on either public or private lands and are not limited to responses at RCRA facilities.</P> <P> <E T="03">Explosives or munitions emergency response specialist</E> means an individual trained in chemical or conventional <PRTPAGE P="10"/>munitions or explosives handling, transportation, render-safe procedures, or destruction techniques. Explosives or munitions emergency response specialists include Department of Defense (DOD) emergency explosive ordnance disposal (EOD), technical escort unit (TEU), and DOD-certified civilian or contractor personnel; and other Federal, State, or local government, or civilian personnel similarly trained in explosives or munitions emergency responses.</P> <P> <E T="03">Facility</E> means:</P> <P>(1) All contiguous land, and structures, other appurtenances, and improvements on the land, used for treating, storing, or disposing of hazardous waste. A facility may consist of several treatment, storage, or disposal operational units (e.g., one or more landfills, surface impoundments, or combinations of them).</P> <P>(2) For the purpose of implementing corrective action under 40 CFR 264.101 or 267.101, all contiguous property under the control of the owner or operator seeking a permit under subtitle C of RCRA. This definition also applies to facilities implementing corrective action under RCRA Section 3008(h).</P> <P>(3) Notwithstanding paragraph (2) of this definition, a remediation waste management site is not a facility that is subject to 40 CFR 264.101, but is subject to corrective action requirements if the site is located within such a facility.</P> <P> <E T="03">Federal agency</E> means any department, agency, or other instrumentality of the Federal Government, any independent agency or establishment of --the Federal Government including any Government corporation, and the Government Printing Office.</P> <P> <E T="03">Federal, State and local approvals or permits necessary to begin physical construction</E> means permits and approvals required under Federal, State or local hazardous waste control statutes, regulations or ordinances.</P> <P> <E T="03">Final closure</E> means the closure of all hazardous waste management units at the facility in accordance with all applicable closure requirements so that hazardous waste management activities under parts 264 and 265 of this chapter are no longer conducted at the facility unless subject to the provisions in § 262.34.</P> <P> <E T="03">Food-chain crops</E> means tobacco, crops grown for human consumption, and crops grown for feed for animals whose products are consumed by humans.</P> <P> <E T="03">Free liquids</E> means liquids which readily separate from the solid portion of a waste under ambient temperature and pressure.</P> <P> <E T="03">Freeboard</E> means the vertical distance between the top of a tank or surface impoundment dike, and the surface of the waste contained therein.</P> <P> <E T="03">Gasification.</E> For the purpose of complying with 40 CFR 261.4(a)(12)(i), gasification is a process, conducted in an enclosed device or system, designed and operated to process petroleum feedstock, including oil-bearing hazardous secondary materials through a series of highly controlled steps utilizing thermal decomposition, limited oxidation, and gas cleaning to yield a synthesis gas composed primarily of hydrogen and carbon monoxide gas.</P> <P> <E T="03">Generator</E> means any person, by site, whose act or process produces hazardous waste identified or listed in part 261 of this chapter or whose act first causes a hazardous waste to become subject to regulation.</P> <P> <E T="03">Ground water</E> means water below the land surface in a zone of saturation.</P> <P> <E T="03">Hazardous waste</E> means a hazardous waste as defined in § 261.3 of this chapter.</P> <P> <E T="03">Hazardous waste constituent</E> means a constituent that caused the Administrator to list the hazardous waste in part 261, subpart D, of this chapter, or a constituent listed in table 1 of § 261.24 of this chapter.</P> <P> <E T="03">Hazardous waste management unit</E> is a contiguous area of land on or in which hazardous waste is placed, or the largest area in which there is significant likelihood of mixing hazardous waste constituents in the same area. Examples of hazardous waste management units include a surface impoundment, a waste pile, a land treatment area, a landfill cell, an incinerator, a tank and its associated piping and underlying containment system and a container storage area. A container alone does not constitute a unit; the unit includes <PRTPAGE P="11"/>containers and the land or pad upon which they are placed.</P> <P> <E T="03">In operation</E> refers to a facility which is treating, storing, or disposing of hazardous waste.</P> <P> <E T="03">Inactive portion</E> means that portion of a facility which is not operated after the effective date of part 261 of this chapter. (See also “active portion” and “closed portion”.)</P> <P> <E T="03">Incinerator</E> means any enclosed device that:</P> <P>(1) Uses controlled flame combustion and neither meets the criteria for classification as a boiler, sludge dryer, or carbon regeneration unit, nor is listed as an industrial furnace; or</P> <P>(2) Meets the definition of infrared incinerator or plasma arc incinerator.</P> <P> <E T="03">Incompatible waste</E> means a hazardous waste which is unsuitable for:</P> <P>(1) Placement in a particular device or facility because it may cause corrosion or decay of containment materials (e.g., container inner liners or tank walls); or</P> <P>(2) Commingling with another waste or material under uncontrolled conditions because the commingling might produce heat or pressure, fire or explosion, violent reaction, toxic dusts, mists, fumes, or gases, or flammable fumes or gases. </P> <FP>(See appendix V of parts 264 and 265 of this chapter for examples.)</FP> <P> <E T="03">Individual generation site</E> means the contiguous site at or on which one or more hazardous wastes are generated. An individual generation site, such as a large manufacturing plant, may have one or more sources of hazardous waste but is considered a single or individual generation site if the site or property is contiguous.</P> <P> <E T="03">Industrial furnace</E> means any of the following enclosed devices that are integral components of manufacturing processes and that use thermal treatment to accomplish recovery of materials or energy:</P> <P>(1) Cement kilns</P> <P>(2) Lime kilns</P> <P>(3) Aggregate kilns</P> <P>(4) Phosphate kilns</P> <P>(5) Coke ovens</P> <P>(6) Blast furnaces</P> <P>(7) Smelting, melting and refining furnaces (including pyrometallurgical devices such as cupolas, reverberator furnaces, sintering machine, roasters, and foundry furnaces)</P> <P>(8) Titanium dioxide chloride process oxidation reactors</P> <P>(9) Methane reforming furnaces</P> <P>(10) Pulping liquor recovery furnaces</P> <P>(11) Combustion devices used in the recovery of sulfur values from spent sulfuric acid</P> <P>(12) Halogen acid furnaces (HAFs) for the production of acid from halogenated hazardous waste generated by chemical production facilities where the furnace is located on the site of a chemical production facility, the acid product has a halogen acid content of at least 3%, the acid product is used in a manufacturing process, and, except for hazardous waste burned as fuel, hazardous waste fed to the furnace has a minimum halogen content of 20% as-generated.</P> <P>(13) Such other devices as the Administrator may, after notice and comment, add to this list on the basis of one or more of the following factors:</P> <P>(i) The design and use of the device primarily to accomplish recovery of material products;</P> <P>(ii) The use of the device to burn or reduce raw materials to make a material product;</P> <P>(iii) The use of the device to burn or reduce secondary materials as effective substitutes for raw materials, in processes using raw materials as principal feedstocks;</P> <P>(iv) The use of the device to burn or reduce secondary materials as ingredients in an industrial process to make a material product;</P> <P>(v) The use of the device in common industrial practice to produce a material product; and</P> <P>(vi) Other factors, as appropriate.</P> <P> <E T="03">Infrared incinerator</E> means any enclosed device that uses electric powered resistance heaters as a source of radiant heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.</P> <P> <E T="03">Inground tank</E> means a device meeting the definition of “tank” in § 260.10 whereby a portion of the tank wall is situated to any degree within the ground, thereby preventing visual inspection of that external surface area of the tank that is in the ground.<PRTPAGE P="12"/> </P> <P> <E T="03">Injection well</E> means a well into which fluids are injected. (See also “underground injection”.)</P> <P> <E T="03">Inner liner</E> means a continuous layer of material placed inside a tank or container which protects the construction materials of the tank or container from the contained waste or reagents used to treat the waste.</P> <P> <E T="03">Installation inspector</E> means a person who, by reason of his knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems.</P> <P> <E T="03">International shipment</E> means the transportation of hazardous waste into or out of the jurisdiction of the United States.</P> <P> <E T="03">Lamp,</E> also referred to as “universal waste lamp”, is defined as the bulb or tube portion of an electric lighting device. A lamp is specifically designed to produce radiant energy, most often in the ultraviolet, visible, and infra-red regions of the electromagnetic spectrum. Examples of common universal waste electric lamps include, but are not limited to, fluorescent, high intensity discharge, neon, mercury vapor, high pressure sodium, and metal halide lamps.</P> <P> <E T="03">Landfill</E> means a disposal facility or part of a facility where hazardous waste is placed in or on land and which is not a pile, a land treatment facility, a surface impoundment, an underground injection well, a salt dome formation, a salt bed formation, an underground mine, a cave, or a corrective action management unit.</P> <P> <E T="03">Landfill cell</E> means a discrete volume of a hazardous waste landfill which uses a liner to provide isolation of wastes from adjacent cells or wastes. Examples of landfill cells are trenches and pits.</P> <P> <E T="03">Land treatment facility</E> means a facility or part of a facility at which hazardous waste is applied onto or incorporated into the soil surface; such facilities are disposal facilities if the waste will remain after closure.</P> <P> <E T="03">Leachate</E> means any liquid, including any suspended components in the liquid, that has percolated through or drained from hazardous waste.</P> <P> <E T="03">Leak-detection system</E> means a system capable of detecting the failure of either the primary or secondary containment structure or the presence of a release of hazardous waste or accumulated liquid in the secondary containment structure. Such a system must employ operational controls (e.g., daily visual inspections for releases into the secondary containment system of aboveground tanks) or consist of an interstitial monitoring device designed to detect continuously and automatically the failure of the primary or secondary containment structure or the presence of a release of hazardous waste into the secondary containment structure.</P> <P> <E T="03">Liner</E> means a continuous layer of natural or man-made materials, beneath or on the sides of a surface impoundment, landfill, or landfill cell, which restricts the downward or lateral escape of hazardous waste, hazardous waste constituents, or leachate.</P> <P> <E T="03">Management</E> or <E T="03">hazardous waste management</E> means the systematic control of the collection, source separation, storage, transportation, processing, treatment, recovery, and disposal of hazardous waste.</P> <P> <E T="03">Manifest</E> means: The shipping document EPA Form 8700-22 (including, if necessary, EPA Form 8700-22A), originated and signed by the generator or offeror in accordance with the instructions in the appendix to 40 CFR part 262 and the applicable requirements of 40 CFR parts 262 through 265.</P> <P> <E T="03">Manifest tracking number</E> means: The alphanumeric identification number (<E T="03">i.e.</E>, a unique three letter suffix preceded by nine numerical digits), which is pre-printed in Item 4 of the Manifest by a registered source.</P> <P> <E T="03">Mercury-containing equipment</E> means a device or part of a device (including thermostats, but excluding batteries and lamps) that contains elemental mercury integral to its function.</P> <P> <E T="03">Military munitions</E> means all ammunition products and components produced or used by or for the U.S. Department of Defense or the U.S. Armed Services for national defense and security, including military munitions under the control of the Department of Defense, the U.S. Coast Guard, the U.S. <PRTPAGE P="13"/>Department of Energy (DOE), and National Guard personnel. The term military munitions includes: confined gaseous, liquid, and solid propellants, explosives, pyrotechnics, chemical and riot control agents, smokes, and incendiaries used by DOD components, including bulk explosives and chemical warfare agents, chemical munitions, rockets, guided and ballistic missiles, bombs, warheads, mortar rounds, artillery ammunition, small arms ammunition, grenades, mines, torpedoes, depth charges, cluster munitions and dispensers, demolition charges, and devices and components thereof. Military munitions do not include wholly inert items, improvised explosive devices, and nuclear weapons, nuclear devices, and nuclear components thereof. However, the term does include non-nuclear components of nuclear devices, managed under DOE's nuclear weapons program after all required sanitization operations under the Atomic Energy Act of 1954, as amended, have been completed.</P> <P> <E T="03">Mining overburden returned to the mine site</E> means any material overlying an economic mineral deposit which is removed to gain access to that deposit and is then used for reclamation of a surface mine.</P> <P> <E T="03">Miscellaneous unit</E> means a hazardous waste management unit where hazardous waste is treated, stored, or disposed of and that is not a container, tank, surface impoundment, pile, land treatment unit, landfill, incinerator, boiler, industrial furnace, underground injection well with appropriate technical standards under part 146 of this chapter, containment building, corrective action management unit, unit eligible for a research, development, and demonstration permit under 40 CFR 270.65, or staging pile.</P> <P> <E T="03">Movement</E> means that hazardous waste transported to a facility in an individual vehicle.</P> <P> <E T="03">New hazardous waste management facility</E> or <E T="03">new facility</E> means a facility which began operation, or for which construction commenced after October 21, 1976. (See also “Existing hazardous waste management facility”.)</P> <P> <E T="03">New tank system</E> or <E T="03">new tank component</E> means a tank system or component that will be used for the storage or treatment of hazardous waste --and for which installation has commenced after July 14, 1986; except, however, for purposes of § 264.193(g)(2) and § 265.193(g)(2), a new tank system is one for which construction commences after July 14, 1986. (See also “existing tank system.”)</P> <P> <E T="03">On ground tank</E> means a device meeting the definition of “tank” in § 260.10 and that is situated in such a way that the bottom of the tank is on the same level as the adjacent surrounding surface so that the external tank bottom cannot be visually inspected.</P> <P> <E T="03">On-site</E> means the same or geographically contiguous property which may be divided by public or private right-of-way, provided the entrance and exit between the properties is at a cross-roads intersection, and access is by crossing as opposed to going along, the right-of-way. Non-contiguous properties owned by the same person but connected by a right-of-way which he controls and to which the public does not have access, is also considered on-site property.</P> <P> <E T="03">Open burning</E> means the combustion of any material without the following characteristics:</P> <P>(1) Control of combustion air to maintain adequate temperature for efficient combustion,</P> <P>(2) Containment of the combustion-reaction in an enclosed device to provide sufficient residence time and mixing for complete combustion, and</P> <P>(3) Control of emission of the gaseous combustion products.</P> <P>(See also “incineration” and “thermal treatment”.)</P> <P> <E T="03">Operator</E> means the person responsible for the overall operation of a facility.</P> <P> <E T="03">Owner</E> means the person who owns a facility or part of a facility.</P> <P> <E T="03">Partial closure</E> means the closure of a hazardous waste management unit in accordance with the applicable closure requirements of parts 264 and 265 of this chapter at a facility that contains other active hazardous waste management units. For example, partial closure may include the closure of a tank (including its associated piping and underlying containment systems), landfill cell, surface impoundment, waste <PRTPAGE P="14"/>pile, or other hazardous waste management unit, while other units of the same facility continue to operate.</P> <P> <E T="03">Performance Track member facility</E> means a facility that has been accepted by EPA for membership in the National Environmental Performance Track Program and is still a member of the Program. The National Environmental Performance Track Program is a voluntary, facility based, program for top environmental performers. Facility members must demonstrate a good record of compliance, past success in achieving environmental goals, and commit to future specific quantified environmental goals, environmental management systems, local community outreach, and annual reporting of measurable results.</P> <P> <E T="03">Person</E> means an individual, trust, firm, joint stock company, Federal Agency, corporation (including a government corporation), partnership, association, State, municipality, commission, political subdivision of a State, or any interstate body.</P> <P> <E T="03">Personnel</E> or <E T="03">facility personnel</E> means all persons who work at, or oversee the operations of, a hazardous waste facility, and whose actions or failure to act may result in noncompliance with the requirements of part 264 or 265 of this chapter.</P> <P> <E T="03">Pesticide</E> means any substance or mixture of substances intended for preventing, destroying, repelling, or mitigating any pest, or intended for use as a plant regulator, defoliant, or desiccant, other than any article that:</P> <P>(1) Is a new animal drug under FFDCA section 201(w), or</P> <P>(2) Is an animal drug that has been determined by regulation of the Secretary of Health and Human Services not to be a new animal drug, or</P> <P>(3) Is an animal feed under FFDCA section 201(x) that bears or contains any substances described by paragraph (1) or (2) of this definition.</P> <P> <E T="03">Pile</E> means any non-containerized accumulation of solid, nonflowing hazardous waste that is used for treatment or storage and that is not a containment building.</P> <P> <E T="03">Plasma arc incinerator</E> means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.</P> <P> <E T="03">Point source</E> means any discernible, confined, and discrete conveyance, including, but not limited to any pipe, ditch, channel, tunnel, conduit, well, discrete fissure, container, rolling stock, concentrated animal feeding operation, or vessel or other floating craft, from which pollutants are or may be discharged. This term does not include return flows from irrigated agriculture.</P> <P> <E T="03">Publicly owned treatment works</E> or <E T="03">POTW</E> means any device or system used in the treatment (including recycling and reclamation) of municipal sewage or industrial wastes of a liquid nature which is owned by a “State” or “municipality” (as defined by section 502(4) of the CWA). This definition includes sewers, pipes, or other conveyances only if they convey wastewater to a POTW providing treatment.</P> <P> <E T="03">Qualified Ground-Water Scientist</E> means a scientist or engineer who has received a baccalaureate or post-graduate degree in the natural sciences or engineering, and has sufficient training and experience in ground-water hydrology and related fields as may be demonstrated by state registration, professional certifications, or completion of accredited university courses that enable that individual to make sound professional judgements regarding ground-water monitoring and contaminant fate and transport.</P> <P> <E T="03">Regional Administrator</E> means the Regional Administrator for the EPA Region in which the facility is located, or his designee.</P> <P> <E T="03">Remediation waste</E> means all solid and hazardous wastes, and all media (including ground water, surface water, soils, and sediments) and debris, that are managed for implementing cleanup.</P> <P> <E T="03">Remediation waste management site</E> means a facility where an owner or operator is or will be treating, storing or disposing of hazardous remediation wastes. A remediation waste management site is not a facility that is subject to corrective action under 40 CFR 264.101, but is subject to corrective action requirements if the site is located in such a facility.<PRTPAGE P="15"/> </P> <P> <E T="03">Replacement unit</E> means a landfill, surface impoundment, or waste pile unit (1) from which all or substantially all of the waste is removed, and (2) that is subsequently reused to treat, store, or dispose of hazardous waste. “Replacement unit” does not apply to a unit from which waste is removed during closure, if the subsequent reuse solely involves the disposal of waste from that unit and other closing units or corrective action areas at the facility, in accordance with an approved closure plan or EPA or State approved corrective action.</P> <P> <E T="03">Representative sample</E> means a sample of a universe or whole (e.g., waste pile, lagoon, ground water) which can be expected to exhibit the average properties of the universe or whole.</P> <P> <E T="03">Run-off</E> means any rainwater, leachate, or other liquid that drains over land from any part of a facility.</P> <P> <E T="03">Run-on</E> means any rainwater, leachate, or other liquid that drains over land onto any part of a facility.</P> <P> <E T="03">Saturated zone</E> or <E T="03">zone of saturation</E> means that part of the earth's crust in which all voids are filled with water.</P> <P> <E T="03">Sludge</E> means any solid, semi-solid, --or liquid waste generated from a municipal, commercial, or industrial wastewater treatment plant, water supply treatment plant, or air pollution control facility exclusive of the treated effluent from a wastewater treatment plant.</P> <P> <E T="03">Sludge dryer</E> means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.</P> <P> <E T="03">Small Quantity Generator</E> means a generator who generates less than 1000 kg of hazardous waste in a calendar month.</P> <P> <E T="03">Solid waste</E> means a solid waste as defined in § 261.2 of this chapter.</P> <P> <E T="03">Sorbent</E> means a material that is used to soak up free liquids by either adsorption or absorption, or both. <E T="03">Sorb</E> means to either adsorb or absorb, or both.</P> <P> <E T="03">Staging pile</E> means an accumulation of solid, non-flowing remediation waste (as defined in this section) that is not a containment building and that is used only during remedial operations for temporary storage at a facility. Staging piles must be designated by the Director according to the requirements of 40 CFR 264.554.</P> <P> <E T="03">State</E> means any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the Virgin Islands, Guam, American Samoa, and the Commonwealth of the Northern Mariana Islands.</P> <P> <E T="03">Storage</E> means the holding of hazardous waste for a temporary period, at the end of which the hazardous waste is treated, disposed of, or stored elsewhere.</P> <P> <E T="03">Sump</E> means any pit or reservoir that meets the definition of tank and those troughs/trenches connected to it that serve to collect hazardous waste for transport to hazardous waste storage, treatment, or disposal facilities; except that as used in the landfill, surface impoundment, and waste pile rules, “sump” means any lined pit or reservoir that serves to collect liquids drained from a leachate collection and removal system or leak detection system for subsequent removal from the system.</P> <P> <E T="03">Surface impoundment</E> or <E T="03">impoundment</E> means a facility or part of a facility which is a natural topographic depression, man-made excavation, or diked area formed primarily of earthen materials (although it may be lined with man-made materials), which is designed to hold an accumulation of liquid wastes or wastes containing free liquids, and which is not an injection well. Examples of surface impoundments are holding, storage, settling, and aeration pits, ponds, and lagoons.</P> <P> <E T="03">Tank</E> means a stationary device, designed to contain an accumulation of hazardous waste which is constructed primarily of non-earthen materials (e.g., wood, concrete, steel, plastic) which provide structural support.</P> <P> <E T="03">Tank system</E> means a hazardous waste storage or treatment tank and its associated ancillary equipment and containment system.</P> <P> <E T="03">TEQ</E> means toxicity equivalence, the international method of relating the toxicity of various dioxin/furan congeners to the toxicity of 2,3,7,8-tetrachlorodibenzo-p-dioxin.<PRTPAGE P="16"/> </P> <P> <E T="03">Thermal treatment</E> means the treatment of hazardous waste in a device which uses elevated temperatures as the primary means to change the chemical, physical, or biological character or composition of the hazardous waste. Examples of thermal treatment processes are incineration, molten salt, pyrolysis, calcination, wet air oxidation, and microwave discharge. (See also “incinerator” and “open burning”.)</P> <P> <E T="03">Thermostat</E> means a temperature control device that contains metallic mercury in an ampule attached to a bimetal sensing element, and mercury-containing ampules that have been removed from these temperature control devices in compliance with the requirements of 40 CFR 273.13(c)(2) or 273.33(c)(2).</P> <P> <E T="03">Totally enclosed treatment facility</E> means a facility for the treatment of hazardous waste which is directly connected to an industrial production process and which is constructed and operated in a manner which prevents the release of any hazardous waste or any constituent thereof into the environment during treatment. An example is a pipe in which waste acid is neutralized.</P> <P> <E T="03">Transfer facility</E> means any transportation related facility including loading docks, parking areas, storage areas and other similar areas where shipments of hazardous waste are held during the normal course of transportation.</P> <P> <E T="03">Transport vehicle</E> means a motor vehicle or rail car used for the transportation of cargo by any mode. Each cargo-carrying body (trailer, railroad freight car, etc.) is a separate transport vehicle.</P> <P> <E T="03">Transportation</E> means the movement of hazardous waste by air, rail, highway, or water.</P> <P> <E T="03">Transporter</E> means a person engaged in the offsite transportation of hazardous waste by air, rail, highway, or water.</P> <P> <E T="03">Treatability Study</E> means a study in which a hazardous waste is subjected to a treatment process to determine: (1) Whether the waste is amenable to the treatment process, (2) what pretreatment (if any) is required, (3) the optimal process conditions needed to achieve the desired treatment, (4) the efficiency of a treatment process for a specific waste or wastes, or (5) the characteristics and volumes of residuals from a particular treatment process. Also included in this definition for the purpose of the § 261.4 (e) and (f) exemptions are liner compatibility, corrosion, and other material compatibility studies and toxicological and health effects studies. A “treatability study” is not a means to commercially treat or dispose of hazardous waste.</P> <P> <E T="03">Treatment</E> means any method, technique, or process, including neutralization, designed to change the physical, chemical, or biological character or composition of any hazardous waste so as to neutralize such waste, or so as to recover energy or material resources from the waste, or so as to render such waste non-hazardous, or less hazardous; safer to transport, store, or dispose of; or amenable for recovery, amenable for storage, or reduced in volume.</P> <P> <E T="03">Treatment zone</E> means a soil area of the unsaturated zone of a land treatment unit within which hazardous constituents are degraded, transformed, or immobilized.</P> <P> <E T="03">Underground injection</E> means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)</P> <P> <E T="03">Underground tank</E> means a device meeting the definition of “tank” in § 260.10 whose entire surface area is totally below the surface of and covered by the ground.</P> <P> <E T="03">Unfit-for use tank system</E> means a tank system that has been determined through an integrity assessment or other inspection to be no longer capable of storing or treating hazardous waste without posing a threat of release of hazardous waste to the environment.</P> <P> <E T="03">United States</E> means the 50 States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, and the Commonwealth of the Northern Mariana Islands.<PRTPAGE P="17"/> </P> <P> <E T="03">Universal waste</E> means any of the following hazardous wastes that are managed under the universal waste requirements of part 273 of this chapter:</P> <P>(1) Batteries as described in § 273.2 of this chapter;</P> <P>(2) Pesticides as described in § 273.3 of this chapter;</P> <P>(3) Mercury-containing equipment as described in § 273.4 of this chapter; and</P> <P>(4) Lamps as described in § 273.5 of this chapter.</P> <P> <E T="03">Universal Waste Handler:</E> </P> <P>(1) Means:</P> <P>(i) A generator (as defined in this section) of universal waste; or</P> <P>(ii) The owner or operator of a facility, including all contiguous property, that receives universal waste from other universal waste handlers, accumulates universal waste, and sends universal waste to another universal waste handler, to a destination facility, or to a foreign destination.</P> <P>(2) Does not mean:</P> <P>(i) A person who treats (except under the provisions of 40 CFR 273.13 (a) or (c), or 273.33 (a) or (c)), disposes of, or recycles universal waste; or</P> <P>(ii) A person engaged in the off-site transportation of universal waste by air, rail, highway, or water, including a universal waste transfer facility.</P> <P> <E T="03">Universal Waste Transporter</E> means a person engaged in the off-site transportation of universal waste by air, rail, highway, or water.</P> <P> <E T="03">Unsaturated zone</E> or <E T="03">zone of aeration</E> means the zone between the land surface and the water table.</P> <P> <E T="03">Uppermost aquifer</E> means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.</P> <P> <E T="03">Used oil</E> means any oil that has been refined from crude oil, or any synthetic oil, that has been used and as a result of such use is contaminated by physical or chemical impurities.</P> <P> <E T="03">Vessel</E> includes every description of watercraft, used or capable of being used as a means of transportation on the water.</P> <P> <E T="03">Wastewater treatment unit</E> means a device which:</P> <P>(1) Is part of a wastewater treatment facility that is subject to regulation under either section 402 or 307(b) of the Clean Water Act; and</P> <P>(2) Receives and treats or stores an influent wastewater that is a hazardous waste as defined in § 261.3 of this chapter, or that generates and accumulates a wastewater treatment sludge that is a hazardous waste as defined in § 261.3 of this chapter, or treats or stores a wastewater treatment sludge which is a hazardous waste as defined in § 261.3 of this Chapter; and</P> <P>(3) Meets the definition of tank or tank system in § 260.10 of this chapter.</P> <P> <E T="03">Water (bulk shipment)</E> means the bulk transportation of hazardous waste which is loaded or carried on board a vessel without containers or labels.</P> <P> <E T="03">Well</E> means any shaft or pit dug or bored into the earth, generally of a cylindrical form, and often walled with bricks or tubing to prevent the earth from caving in.</P> <P> <E T="03">Well injection:</E> (See “underground injection”.)</P> <P> <E T="03">Zone of engineering control</E> means an area under the control of the owner/operator that, upon detection of a hazardous waste release, can be readily cleaned up prior to the release of hazardous waste or hazardous constituents to ground water or surface water.</P> <CITA>[45 FR 33073, May 19, 1980]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 260.10, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 260.11</SECTNO> <SUBJECT>References.</SUBJECT> <P>(a) When used in parts 260 through 268 and 278 of this chapter, the following publications are incorporated by reference. These incorporations by reference were approved by the Director of the Federal Register pursuant to 5 U.S.C. 552(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of approval and a notice of any change in these materials will be published in the <E T="04">Federal Register.</E> Copies may be inspected at the Library, U.S. Environmental Protection Agency, 1200 Pennsylvania Ave., NW. (3403T), Washington, DC 20460, <E T="03">libraryhq@epa.gov;</E> or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call <PRTPAGE P="18"/>202-741-6030, or go to: <E T="03">http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.</E> </P> <P>(b) The following materials are available for purchase from the American Society for Testing and Materials, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.</P> <P>(1) ASTM D-93-79 or D-93-80, “Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester,” IBR approved for § 261.21.</P> <P>(2) ASTM D-1946-82, “Standard Method for Analysis of Reformed Gas by Gas Chromatography,” IBR approved for §§ 264.1033, 265.1033.</P> <P>(3) ASTM D 2267-88, “Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography,” IBR approved for § 264.1063.</P> <P>(4) ASTM D 2382-83, “Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method),” IBR approved for §§ 264.1033, 265.1033.</P> <P>(5) ASTM D 2879-92, “Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope,” IBR approved for § 265.1084.</P> <P>(6) ASTM D-3278-78, “Standard Test Methods for Flash Point for Liquids by Setaflash Closed Tester,” IBR approved for § 261.21(a).</P> <P>(7) ASTM E 168-88, “Standard Practices for General Techniques of Infrared Quantitative Analysis,” IBR approved for § 264.1063.</P> <P>(8) ASTM E 169-87, “Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis,” IBR approved for § 264.1063.</P> <P>(9) ASTM E 260-85, “Standard Practice for Packed Column Gas Chromatography,” IBR approved for § 264.1063.</P> <P>(10) ASTM E 926-88, “Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals,” Test Method C—Bomb, Acid Digestion Method.</P> <P>(c) The following materials are available for purchase from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161; or for purchase from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, (202) 512-1800.</P> <P>(1) “APTI Course 415: Control of Gaseous Emissions,” EPA Publication EPA-450/2-81-005, December 1981, IBR approved for §§ 264.1035 and 265.1035.</P> <P>(2) Method 1664, Revision A, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry, PB99-121949, IBR approved for part 261, appendix IX.</P> <P>(3) The following methods as published in the test methods compendium known as “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, Third Edition. A suffix of “A” in the method number indicates revision one (the method has been revised once). A suffix of “B” in the method number indicates revision two (the method has been revised twice). A suffix of “C” in the method number indicates revision three (the method has been revised three times). A suffix of “D” in the method number indicates revision four (the method has been revised four times).</P> <P>(i) Method 0010, dated September 1986 and in the Basic Manual, IBR approved for part 261, appendix IX.</P> <P>(ii) Method 0020, dated September 1986 and in the Basic Manual, IBR approved for part 261, appendix IX.</P> <P>(iii) Method 0030, dated September 1986 and in the Basic Manual, IBR approved for part 261, appendix IX.</P> <P>(iv) Method 1320, dated September 1986 and in the Basic Manual, IBR approved for part 261, appendix IX.</P> <P>(v) Method 1311, dated September 1992 and in Update I, IBR approved for part 261, appendix IX, and §§ 261.24, 268.7, 268.40.</P> <P>(vi) Method 1330A, dated September 1992 and in Update I, IBR approved for part 261, appendix IX.</P> <P>(vii) Method 1312 dated September 1994 and in Update III, IBR approved for part 261, appendix IX and § 278.3(b)(1).</P> <P>(viii) Method 0011, dated December 1996 and in Update III, IBR approved for part 261, appendix IX, and part 266, appendix IX.</P> <P>(ix) Method 0023A, dated December 1996 and in Update III, IBR approved <PRTPAGE P="19"/>for part 261, appendix IX, part 266, appendix IX, and § 266.104.</P> <P>(x) Method 0031, dated December 1996 and in Update III, IBR approved for part 261, appendix IX.</P> <P>(xi) Method 0040, dated December 1996 and in Update III, IBR approved for part 261, appendix IX.</P> <P>(xii) Method 0050, dated December 1996 and in Update III, IBR approved for part 261, appendix IX, part 266, appendix IX, and § 266.107.</P> <P>(xiii) Method 0051, dated December 1996 and in Update III, IBR approved for part 261, appendix IX, part 266, appendix IX, and § 266.107.</P> <P>(xiv) Method 0060, dated December 1996 and in Update III, IBR approved for part 261, appendix IX, § 266.106, and part 266, appendix IX.</P> <P>(xv) Method 0061, dated December 1996 and in Update III, IBR approved for part 261, appendix IX, § 266.106, and part 266, appendix IX.</P> <P>(xvi) Method 9071B, dated April 1998 and in Update IIIA, IBR approved for part 261, appendix IX.</P> <P>(xvii) Method 1010A, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX.</P> <P>(xviii) Method 1020B, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX.</P> <P>(xix) Method 1110A, dated November 2004 and in Update IIIB, IBR approved for § 261.22 and part 261, appendix IX.</P> <P>(xx) Method 1310B, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX.</P> <P>(xxi) Method 9010C, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX and §§ 268.40, 268.44, 268.48.</P> <P>(xxii) Method 9012B, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX and §§ 268.40, 268.44, 268.48.</P> <P>(xxiii) Method 9040C, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX and § 261.22.</P> <P>(xxiv) Method 9045D, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX.</P> <P>(xxv) Method 9060A, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX, and §§ 264.1034, 264.1063, 265.1034, 265.1063.</P> <P>(xxvi) Method 9070A, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX.</P> <P>(xxvii) Method 9095B, dated November 2004 and in Update IIIB, IBR approved, part 261, appendix IX, and §§ 264.190, 264.314, 265.190, 265.314, 265.1081, 267.190(a), 268.32.</P> <P>(d) The following materials are available for purchase from the National Fire Protection Association, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101.</P> <P>(1) “Flammable and Combustible Liquids Code” (1977 or 1981), IBR approved for §§ 264.198, 265.198, 267.202(b).</P> <P>(2) [Reserved]</P> <P>(e) The following materials are available for purchase from the American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005.</P> <P>(1) API Publication 2517, Third Edition, February 1989, “Evaporative Loss from External Floating-Roof Tanks,” IBR approved for § 265.1084.</P> <P>(2) [Reserved]</P> <P>(f) The following materials are available for purchase from the Environmental Protection Agency, Research Triangle Park, NC.</P> <P>(1) “Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised”, October 1992, EPA Publication No. EPA-450/R-92-019, IBR approved for part 266, appendix IX.</P> <P>(2) [Reserved]</P> <P>(g) The following materials are available for purchase from the Organisation for Economic Co-operation and Development, Environment Direcorate, 2 rue Andre Pascal, 75775 Paris Cedex 16, France.</P> <P>(1) OECD Green List of Wastes (revised May 1994), Amber List of Wastes and Red List of Wastes (both revised May 1993) as set forth in Appendix 3, Appendix 4 and Appendix 5, respectively, to the OECD Council Decision C(92)39/FINAL (Concerning the Control of Transfrontier Movements of Wastes Destined for Recovery Operations), IBR approved for 262.89 of this chapter.</P> <P>(2) [Reserved]</P> <CITA>[70 FR 34560, June 14, 2005, as amended at 70 FR 53453, Sept. 8, 2005; 70 FR 59575, Oct. 12, 2005; 72 FR 39352, July 18, 2007]</CITA> </SECTION> </SUBPART> <SUBPART> <PRTPAGE P="20"/> <HD SOURCE="HED">Subpart C—Rulemaking Petitions</HD> <SECTION> <SECTNO>§ 260.20</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) Any person may petition the Administrator to modify or revoke any provision in parts 260 through 266, 268 and 273 of this chapter. This section sets forth general requirements which apply to all such petitions. Section 260.21 sets forth additional requirements for petitions to add a testing or analytical method to part 261, 264 or 265 of this chapter. Section 260.22 sets forth additional requirements for petitions to exclude a waste or waste-derived material at a particular facility from § 261.3 of this chapter or the lists of hazardous wastes in subpart D of part 261 of this chapter. Section 260.23 sets forth additional requirements for petitions to amend part 273 of this chapter to include additional hazardous wastes or categories of hazardous waste as universal waste.</P> <P>(b) Each petition must be submitted to the Administrator by certified mail and must include:</P> <P>(1) The petitioner's name and address;</P> <P>(2) A statement of the petitioner's interest in the proposed action;</P> <P>(3) A description of the proposed action, including (where appropriate) suggested regulatory language; and</P> <P>(4) A statement of the need and justification for the proposed action, including any supporting tests, studies, or other information.</P> <P>(c) The Administrator will make a tentative decision to grant or deny a petition and will publish notice of such tentative decision, either in the form of an advanced notice of proposed rulemaking, a proposed rule, or a tentative determination to deny the petition, in the <E T="04">Federal Register</E> for written public comment.</P> <P>(d) Upon the written request of any interested person, the Administrator may, at his discretion, hold an informal public hearing to consider oral comments on the tentative decision. A person requesting a hearing must state the issues to be raised and explain why written comments would not suffice to communicate the person's views. The Administrator may in any case decide on his own motion to hold an informal public hearing.</P> <P>(e) After evaluating all public comments the Administrator will make a final decision by publishing in the <E T="04">Federal Register</E> a regulatory amendment or a denial of the petition.</P> <CITA>[45 FR 33073, May 19, 1980, as amended at 51 FR 40636, Nov. 7, 1986; 57 FR 38564, Aug. 25, 1992; 60 FR 25540, May 11, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.21</SECTNO> <SUBJECT>Petitions for equivalent testing or analytical methods.</SUBJECT> <P>(a) Any person seeking to add a testing or analytical method to part 261, 264, or 265 of this chapter may petition for a regulatory amendment under this section and § 260.20. To be successful, the person must demonstrate to the satisfaction of the Administrator that the proposed method is equal to or superior to the corresponding method prescribed in part 261, 264, or 265 of this chapter, in terms of its sensitivity, accuracy, and precision (i.e., reproducibility).</P> <P>(b) Each petition must include, in addition to the information required by § 260.20(b):</P> <P>(1) A full description of the proposed method, including all procedural steps and equipment used in the method;</P> <P>(2) A description of the types of wastes or waste matrices for which the proposed method may be used;</P> <P>(3) Comparative results obtained from using the proposed method with those obtained from using the relevant or corresponding methods prescribed in part 261, 264, or 265 of this chapter;</P> <P>(4) An assessment of any factors which may interfere with, or limit the use of, the proposed method; and</P> <P>(5) A description of the quality control procedures necessary to ensure the sensitivity, accuracy and precision of the proposed method.</P> <P>(c) After receiving a petition for an equivalent method, the Administrator may request any additional information on the proposed method which he may reasonably require to evaluate the method.</P> <P>(d) If the Administrator amends the regulations to permit use of a new testing method, the method will be incorporated by reference in § 260.11 and added to “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, U.S. <PRTPAGE P="21"/>Environmental Protection Agency, Office of Solid Waste, Washington, DC 20460.</P> <CITA>[45 FR 33073, May 19, 1980, as amended at 49 FR 47391, Dec. 4, 1984; 70 FR 34561, June 14, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.22</SECTNO> <SUBJECT>Petitions to amend part 261 to exclude a waste produced at a particular facility.</SUBJECT> <P>(a) Any person seeking to exclude a waste at a particular generating facility from the lists in subpart D of part 261 may petition for a regulatory amendment under this section and § 260.20. To be successful:</P> <P>(1) The petitioner must demonstrate to the satisfaction of the Administrator that the waste produced by a particular generating facility does not meet any of the criteria under which the waste was listed as a hazardous or an acutely hazardous waste; and</P> <P>(2) Based on a complete application, the Administrator must determine, where he has a reasonable basis to believe that factors (including additional constituents) other than those for which the waste was listed could cause the waste to be a hazardous waste, that such factors do not warrant retaining the waste as a hazardous waste. A waste which is so excluded, however, still may be a hazardous waste by operation of subpart C of part 261.</P> <P>(b) The procedures in this Section and § 260.20 may also be used to petition the Administrator for a regulatory amendment to exclude from § 261.3(a)(2)(ii) or (c), a waste which is described in these Sections and is either a waste listed in subpart D, or is derived from a waste listed in subpart D. This exclusion may only be issued for a particular generating, storage, treatment, or disposal facility. The petitioner must make the same demonstration as required by paragraph (a) of this section. Where the waste is a mixture of solid waste and one or more listed hazardous wastes or is derived from one or more hazardous wastes, his demonstration must be made with respect to the waste mixture as a whole; analyses must be conducted for not only those constituents for which the listed waste contained in the mixture was listed as hazardous, but also for factors (including additional constituents) that could cause the waste mixture to be a hazardous waste. A waste which is so excluded may still be a hazardous waste by operation of subpart C of part 261.</P> <P>(c) If the waste is listed with codes “I”, “C”, “R”, or “E”, in subpart D,</P> <P>(1) The petitioner must show that the waste does not exhibit the relevant characteristic for which the waste was listed as defined in § 261.21, § 261.22, § 261.23, or § 261.24 using any applicable methods prescribed therein. The petitioner also must show that the waste does not exhibit any of the other characteristics defined in § 261.21, § 261.22, § 261.23, or § 261.24 using any applicable methods prescribed therein;</P> <P>(2) Based on a complete application, the Administrator must determine, where he has a reasonable basis to believe that factors (including additional constituents) other than those for which the waste was listed could cause the waste to be hazardous waste, that such factors do not warrant retaining the waste as a hazardous waste. A waste which is so excluded, however, still may be a hazardous waste by operation of subpart C of part 261.</P> <P>(d) If the waste is listed with code “T” in subpart D,</P> <P>(1) The petitioner must demonstrate that the waste:</P> <P>(i) Does not contain the constituent or constituents (as defined in Appendix VII of part 261 of this chapter) that caused the Administrator to list the waste; or</P> <P>(ii) Although containing one or more of the hazardous constituents (as defined in appendix VII of part 261) that caused the Administrator to list the waste, does not meet the criterion of § 261.11(a)(3) when considering the factors used by the Administrator in § 261.11(a)(3) (i) through (xi) under which the waste was listed as hazardous; and</P> <P>(2) Based on a complete application, the Administrator must determine, where he has a reasonable basis to believe that factors (including additional constituents) other than those for which the waste was listed could cause the waste to be a hazardous waste, that such factors do not warrant retaining the waste as a hazardous waste; and<PRTPAGE P="22"/> </P> <P>(3) The petitioner must demonstrate that the waste does not exhibit any of the characteristics defined in § 261.21, § 261.22, § 261.23, and § 261.24 using any applicable methods prescribed therein;</P> <P>(4) A waste which is so excluded, however, still may be a hazardous waste by operation of subpart C of part 261.</P> <P>(e) If the waste is listed with the code “H” in subpart D,</P> <P>(1) The petitioner must demonstrate that the waste does not meet the criterion of § 261.11(a)(2); and</P> <P>(2) Based on a complete application, the Administrator must determine, where he has a reasonable basis to believe that additional factors (including additional constituents) other than those for which the waste was listed could cause the waste to be a hazardous waste, that such factors do not warrant retaining the waste as a hazardous waste; and</P> <P>(3) The petitioner must demonstrate that the waste does not exhibit any of the characteristics defined in § 261.21, § 261.22, § 261.23, and § 261.24 using any applicable methods prescribed therein;</P> <P>(4) A waste which is so excluded, however, still may be a hazardous waste by operation of subpart C of part 261.</P> <P>(f) [Reserved for listing radioactive wastes.]</P> <P>(g) [Reserved for listing infectious wastes.]</P> <P>(h) Demonstration samples must consist of enough representative samples, but in no case less than four samples, taken over a period of time sufficient to represent the variability or the uniformity of the waste.</P> <P>(i) Each petition must include, in addition to the information required by § 260.20(b):</P> <P>(1) The name and address of the laboratory facility performing the sampling or tests of the waste;</P> <P>(2) The names and qualifications of the persons sampling and testing the waste;</P> <P>(3) The dates of sampling and testing;</P> <P>(4) The location of the generating facility;</P> <P>(5) A description of the manufacturing processes or other operations and feed materials producing the waste and an assessment of whether such processes, operations, or feed materials can or might produce a waste that is not covered by the demonstration;</P> <P>(6) A description of the waste and an estimate of the average and maximum monthly and annual quantities of waste covered by the demonstration;</P> <P>(7) Pertinent data on and discussion of the factors delineated in the respective criterion for listing a hazardous waste, where the demonstration is based on the factors in § 261.11(a)(3);</P> <P>(8) A description of the methodologies and equipment used to obtain the representative samples;</P> <P>(9) A description of the sample handling and preparation techniques, including techniques used for extraction, containerization and preservation of the samples;</P> <P>(10) A description of the tests performed (including results);</P> <P>(11) The names and model numbers of the instruments used in performing the tests; and</P> <P>(12) The following statement signed by the generator of the waste or his authorized representative:</P> <EXTRACT> <P>I certify under penalty of law that I have personally examined and am familiar with the information submitted in this demonstration and all attached documents, and that, based on my inquiry of those individuals immediately responsible for obtaining the information, I believe that the submitted information is true, accurate, and complete. I am aware that there are significant penalties for submitting false information, including the possibility of fine and imprisonment.</P> </EXTRACT> <P>(j) After receiving a petition for an exclusion, the Administrator may request any additional information which he may reasonably require to evaluate the petition.</P> <P>(k) An exclusion will only apply to the waste generated at the individual facility covered by the demonstration and will not apply to waste from any other facility.</P> <P>(l) The Administrator may exclude only part of the waste for which the demonstration is submitted where he has reason to believe that variability of the waste justifies a partial exclusion.</P> <CITA>[45 FR 33073, May 19, 1980, as amended at 50 FR 28742, July 15, 1985; 54 FR 27116, June 27, 1989; 58 FR 46049, Aug. 31, 1994; 70 FR 34561, June 14, 2005; 71 FR 40258, July 14, 2006]</CITA> <EDNOTE> <PRTPAGE P="23"/> <HD SOURCE="HED">Editorial Note:</HD> <P>For information on the availability of a guidance manual for petitions to delist hazardous wastes, see 50 FR 21607, May 28, 1985.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 260.23</SECTNO> <SUBJECT>Petitions to amend 40 CFR part 273 to include additional hazardous wastes.</SUBJECT> <P>(a) Any person seeking to add a hazardous waste or a category of hazardous waste to the universal waste regulations of part 273 of this chapter may petition for a regulatory amendment under this section, 40 CFR 260.20, and subpart G of 40 CFR part 273.</P> <P>(b) To be successful, the petitioner must demonstrate to the satisfaction of the Administrator that regulation under the universal waste regulations of 40 CFR part 273: Is appropriate for the waste or category of waste; will improve management practices for the waste or category of waste; and will improve implementation of the hazardous waste program. The petition must include the information required by 40 CFR 260.20(b). The petition should also address as many of the factors listed in 40 CFR 273.81 as are appropriate for the waste or category of waste addressed in the petition.</P> <P>(c) The Administrator will grant or deny a petition using the factors listed in 40 CFR 273.81. The decision will be based on the weight of evidence showing that regulation under 40 CFR part 273 is appropriate for the waste or category of waste, will improve management practices for the waste or category of waste, and will improve implementation of the hazardous waste program.</P> <P>(d) The Administrator may request additional information needed to evaluate the merits of the petition.</P> <CITA>[60 FR 25540, May 11, 1995]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.30</SECTNO> <SUBJECT>Variances from classification as a solid waste.</SUBJECT> <P>In accordance with the standards and criteria in § 260.31 and the procedures in § 260.33, the Administrator may determine on a case-by-case basis that the following recycled materials are not solid wastes:</P> <P>(a) Materials that are -accumulated speculatively without sufficient amounts being recycled (as defined in § 261.1(c)(8) of this chapter);</P> <P>(b) Materials that are reclaimed and then reused within the original production process in which they were generated; and</P> <P>(c) Materials that have been reclaimed but must be reclaimed further before the materials are completely recovered.</P> <CITA>[50 FR 661, Jan. 4, 1985; 50 FR 14219, Apr. 11, 1985, as amended at 59 FR 48041, Sept. 19, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.31</SECTNO> <SUBJECT>Standards and criteria for variances from classification as a solid waste.</SUBJECT> <P>(a) The Administrator may grant requests for a variance from classifying as a solid waste those materials that are accumulated speculatively without sufficient amounts being recycled if the applicant demonstrates that sufficient amounts of the material will be recycled or transferred for recycling in the following year. If a variance is granted, it is valid only for the following year, but can be renewed, on an annual basis, by filing a new application. The Administrator's decision will be based on the following criteria:</P> <P>(1) The manner in which the material is expected to be recycled, when the material is expected to be recycled, and whether this expected disposition is likely to occur (for example, because of past practice, market factors, the nature of the material, or contractual arrangements for recycling);</P> <P>(2) The reason that the applicant has accumulated the material for one or more years without recycling 75 percent of the volume accumulated at the beginning of the year;</P> <P>(3) The quantity of material already accumulated and the quantity expected to be generated and accumulated before the material is recycled;</P> <P>(4) The extent to which the material is handled to minimize loss;</P> <P>(5) Other relevant factors.</P> <P>(b) The Administrator may grant requests for a variance from classifying as a solid waste those materials that are reclaimed and then reused as feedstock within the original production process in which the materials were generated if the reclamation operation is an essential part of the production process. This determination will be based on the following criteria:<PRTPAGE P="24"/> </P> <P>(1) How economically viable the production process would be if it were to use virgin materials, rather than reclaimed materials;</P> <P>(2) The extent to which the material is handled before reclamation to minimize loss;</P> <P>(3) The time periods between generating the material and its reclamation, and between reclamation and return to the original primary production process;</P> <P>(4) The location of the reclamation operation in relation to the production process;</P> <P>(5) Whether the reclaimed material is used for the purpose for which it was originally produced when it is returned to the original process, and whether it is returned to the process in substantially its original form;</P> <P>(6) Whether the person who generates the material also reclaims it;</P> <P>(7) Other relevant factors.</P> <P>(c) The Regional Administrator may grant requests for a variance from classifying as a solid waste those materials that have been reclaimed but must be reclaimed further before recovery is completed if, after initial reclamation, the resulting material is commodity-like (even though it is not yet a commercial product, and has to be reclaimed further). This determination will be based on the following factors:</P> <P>(1) The degree of processing the material has undergone and the degree of further processing that is required;</P> <P>(2) The value of the material after it has been reclaimed;</P> <P>(3) The degree to which the reclaimed material is like an analogous raw material;</P> <P>(4) The extent to which an end market for the reclaimed material is guaranteed;</P> <P>(5) The extent to which the reclaimed material is handled to minimize loss;</P> <P>(6) Other relevant factors.</P> <CITA>[50 FR 662, Jan. 4, 1985, as amended at 59 FR 48041, Sept. 19, 1994; 71 FR 16902, Apr. 4, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.32</SECTNO> <SUBJECT>Variances to be classified as a boiler.</SUBJECT> <P>In accordance with the standards and criteria in § 260.10 (definition of “boiler”), and the procedures in § 260.33, the Administrator may determine on a case-by-case basis that certain enclosed devices using controlled flame combustion are boilers, even though they do not otherwise meet the definition of boiler contained in § 260.10, after considering the following criteria:</P> <P>(a) The extent to which the unit has provisions for recovering and exporting thermal energy in the form of steam, heated fluids, or heated gases; and</P> <P>(b) The extent to which the combustion chamber and energy recovery equipment are of integral design; and</P> <P>(c) The efficiency of energy recovery, calculated in terms of the recovered energy compared with the thermal value of the fuel; and</P> <P>(d) The extent to which exported energy is utilized; and</P> <P>(e) The extent to which the device is in common and customary use as a “boiler” functioning primarily to produce steam, heated fluids, or heated gases; and</P> <P>(f) Other factors, as appropriate.</P> <CITA>[50 FR 662, Jan. 4, 1985, as amended at 59 FR 48041, Sept. 19, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.33</SECTNO> <SUBJECT>Procedures for variances from classification as a solid waste or to be classified as a boiler.</SUBJECT> <P>The Administrator will use the following procedures in evaluating applications for variances from classification as a solid waste or applications to classify particular enclosed controlled flame combustion devices as boilers:</P> <P>(a) The applicant must apply to the Administrator for the variance. The application must address the relevant criteria contained in § 260.31 or § 260.32.</P> <P>(b) The Administrator will evaluate the application and issue a draft notice tentatively granting or denying the application. Notification of this tentative decision will be provided by newspaper advertisement or radio broadcast in the locality where the recycler is located. The Administrator will accept comment on the tentative decision for 30 days, and may also hold a public hearing upon request or at his discretion. The Administrator will issue a final decision after receipt of comments and after the hearing (if any).</P> <CITA>[59 FR 48041, Sept. 19, 1994]</CITA> </SECTION> <SECTION> <PRTPAGE P="25"/> <SECTNO>§ 260.40</SECTNO> <SUBJECT>Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.</SUBJECT> <P>(a) The Regional Administrator may decide on a case-by-case basis that persons accumulating or storing the --recyclable materials described in § 261.6(a)(2)(iii) of this chapter should be regulated under § 261.6 (b) and (c) of this chapter. The basis for this decision is that the materials are being accumulated or stored in a manner that does not protect human health and the environment because the materials or their toxic constituents have not been adequately contained, or because the materials being accumulated or stored together are incompatible. In making this decision, the Regional Administrator will consider the following factors:</P> <P>(1) The types of materials accumulated or stored and the amounts accumulated or stored;</P> <P>(2) The method of accumulation or storage;</P> <P>(3) The length of time the materials have been accumulated or stored before being reclaimed;</P> <P>(4) Whether any contaminants are being released into the environment, or are likely to be so released; and</P> <P>(5) Other relevant factors.</P> <P>(b) [Reserved]</P> <FP>The procedures for this decision are set forth in § 260.41 of this chapter.</FP> <CITA>[50 FR 662, Jan. 4, 1985, as amended at 71 FR 40258, July 14, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 260.41</SECTNO> <SUBJECT>Procedures for case-by-case regulation of hazardous waste recycling activities.</SUBJECT> <P>The Regional Administrator will use the following procedures when determining whether to regulate hazardous waste recycling activities described in § 261.6(a)(2)(iii) under the provisions of § 261.6 (b) and (c), rather than under the provisions of subpart F of part 266 of this chapter.</P> <P>(a) If a generator is accumulating the waste, the Regional Administrator will issue a notice setting forth the factual basis for the decision and stating that the person must comply with the applicable requirements of subparts A, C, D, and E of part 262 of this chapter. The notice will become final within 30 days, unless the person served requests a public hearing to challenge the decision. Upon receiving such a request, the Regional Administrator will hold a public hearing. The Regional Administrator will provide notice of the hearing to the public and allow public participation at the hearing. The Regional Administrator will issue a final order after the hearing stating whether or not compliance with part 262 is required. The order becomes effective 30 days after service of the decision unless the Regional Administrator specifies a later date or unless review by the Administrator is requested. The order may be appealed to the Administrator by any person who participated in the public hearing. The Administrator may choose to grant or to deny the appeal. Final Agency action occurs when a final order is issued and Agency review procedures are exhausted.</P> <P>(b) If the person is accumulating the recyclable material as a storage facility, the notice will state that the person must obtain a permit in accordance with all applicable provisions of parts 270 and 124 of this chapter. The owner or operator of the facility must apply for a permit within no less than 60 days and no more than six months of notice, as specified in the notice. If the owner or operator of the facility wishes to challenge the Regional Administrator's decision, he may do so in his permit application, in a public hearing held on the draft permit, or in comments filed on the draft permit or on the notice of intent to deny the permit. The fact sheet accompanying the permit will specify the reasons for the Agency's determination. The question of whether the Regional Administrator's decision was proper will remain open for consideration during the public comment period discussed under § 124.11 of this chapter and in any subsequent hearing.</P> <CITA>[50 FR 663, Jan. 4, 1985, as amended at 71 FR 40258, July 14, 2006]</CITA> </SECTION> <APPENDIX> <EAR>Pt. 260, App. I</EAR> <HD SOURCE="HED">Appendix I to Part 260—Overview of Subtitle C Regulations</HD> <P>The Agency believes that there are many people who suspect, but are not sure, that their activities are subject to control under the RCRA Subtitle C rules. This appendix is written for these people. It is designed to help those who are unfamiliar with the hazardous waste control program to determine <PRTPAGE P="26"/>with which, if any, of the regulations they should comply.</P> <HD SOURCE="HD2">Definition of Solid Waste</HD> <P>The first question which such a person should ask himself is: “Is the material I handle a solid waste?” If the answer to this question is “No”, then the material is not subject to control under RCRA and, therefore, the person need not worry about whether he should comply with the Subtitle C rules.</P> <P>Section 261.2 of this chapter provides a definition of “solid waste” which expands the statutory definition of that term given in section 1004(27) of RCRA. This definition is diagrammed in Figure 1 below.</P> <P>Figure 1 explains that all materials are either: (1) Garbage refuse, or sludge; (2) solid, liquid, semi-solid or contained gaseous material; or (3) something else. No materials in the third category are solid waste. All materials in the first category are solid waste. Materials in the second category are solid waste unless they are one of the five exclusions specified in § 261.4(a).</P> <HD SOURCE="HD2">Definition of Hazardous Waste</HD> <P>If a person has determined that his material is a “solid waste”, the next question he should ask is: “Is the solid waste I handle a hazardous waste?”</P> <P>Hazardous waste is defined in § 261.3 of this chapter. Section 261.3 provides that, in general, a solid waste is a hazardous waste if: (1) It is, or contains, a hazardous waste listed in subpart D of part 261 of this chapter, or (2) the waste exhibits any of the characteristics defined in subpart C of part 261. However, parts 260 and 261 also contain provisions which exclude (§§ 261.4(b), 260.20, and 260.22) certain solid wastes from the definition of “hazardous waste”, even though they are listed in subpart D or exhibit one or more of the characteristics defined in subpart C. Figure 2 depicts the interplay of these special provisions with the definition of “hazardous waste”. It presents a series of questions which a person should ask himself concerning his waste. After doing so, the person should be able to determine if the solid waste he handles is a hazardous waste.</P> <HD SOURCE="HD2">Hazardous Waste Regulations</HD> <P>If this is the case, the person should look at Figure 3. Figure 3 depicts the special provisions specified in the final part 261 rules for hazardous waste which:</P> <FP SOURCE="FP-1">1. Is generated by a small quantity generator</FP> <FP SOURCE="FP-1">2. Is or is intended to be legitimately and beneficially used, re-used, recycled, or reclaimed</FP> <FP SOURCE="FP-1">3. Is a sludge; is listed in part 261, subpart D; or is a mixture containing a waste listed in part 261, subpart D.</FP> <P>For each of these Groups, Figure 3 indicates with which subtitle C regulations (if any) the person handling these wastes must comply. Figure 3 also explains that, if a person handles hazardous waste which is not included in any one of the above three categories, his waste is subject to the subtitle C regulations diagrammed in Figure 4.</P> <P>Figure 4 is a flowchart which identifies the three categories of activities regulated under the subtitle C rules, and the corresponding set of rules with which people in each of these categories must comply. It points out that all people who handle hazardous waste are either: (1) Generators of hazardous waste, (2) transporters of hazardous waste, (3) owners or operators of hazardous waste treatment, storage, or disposal facilities, or (4) a combination of the above. Figure 4 indicates that all of these people must notify EPA of their hazardous waste activities in accordance with the Section 3010 Notification Procedures (see 45 FR 12746 <E T="03">et seq.</E>), and obtain an EPA identification number.</P> <P>It should be noted that people handling wastes listed in subpart D of part 261 who have filed, or who intend to file an application to exempt their waste from regulation under the subtitle C rules, must also comply with the notification requirements of section 3010.</P> <P>If a person generates hazardous waste, Figure 4 indicates that he must comply with the part 262 rules. If he transports it, he must comply with the part 263 rules. The standards in both these parts are designed to ensure, among other things, proper recordkeeping and reporting, the use of a manifest system to track shipments of hazardous waste, the use of proper labels and containers, and the delivery of the waste to a permitted treatment, storage, or disposal facility.</P> <P>If a person owns or operates a facility which treats, stores, or disposes of hazardous waste, the standards with which he must comply depend on a number of factors. First of all, if the owner or operator of a <E T="03">storage</E> facility is also the person who generates the waste, and the waste is stored at the facility for less than 90 days for subsequent shipment off-site, then the person must comply with § 262.34 of the part 262 rules.</P> <P>All other owners or operators of treatment, storage, or disposal facilities must comply with either the part 264 or the part 265 rules. To determine with which of these sets of rules an owner or operator must comply, he must find out whether his facility qualifies for interim status. To qualify, the owner or operator must: (1) Have been treating, storing, or disposing of the hazardous waste, or commenced facility construction on or before October 21, 1976, (2) comply with the section 3010 notification requirements, and (3) apply for a permit under part 270 of this chapter.<PRTPAGE P="27"/> </P> <P>If the owner or operator has done all of the above, he qualifies for interim status, and he must comply with the part 265 rules. These rules contain administrative requirements, monitoring and closure standards, and an abbreviated set of technical and closure and post-closure cost estimate requirements. The owner or operator must comply with these standards until final administrative disposition of his permit application is made. If a permit is issued to the owner or operator, he must then comply with the permit which will be based on the part 264 rules.</P> <P>If the owner or operator has not carried out the above three requirements, he does not qualify for interim status. Until he is issued a permit for his facility, the owner or operator must stop waste management operations (if any) at the facility, and send his hazardous waste (if any) to a facility whose owner or operator has interim status or to a storage facility following the part 262 rules.</P> <P>In order to apply for a permit, the owner or operator must comply with the procedures specified in part 270 of this chapter.</P> <P>It should be noted that the Agency will be periodically revising the rules depicted in Figures 3 and 4. All persons are encouraged to write to EPA to verify that the regulations which they are reading are up-to-date. To obtain this verification, contact: Solid Waste Information, U.S. Environmental Protection Agency, 26 West St. Clair Street, Cincinnati, Ohio 45268 (513) 684-5362.</P> <GPH DEEP="355" SPAN="2"> <GID>EC01AU92.000</GID> </GPH> <GPH DEEP="350" SPAN="2"> <PRTPAGE P="28"/> <GID>EC01AU92.001</GID> </GPH> <GPH DEEP="353" SPAN="2"> <PRTPAGE P="29"/> <GID>EC01AU92.002</GID> </GPH> <GPH DEEP="400" SPAN="2"> <PRTPAGE P="30"/> <GID>EC01AU92.003</GID> </GPH> </APPENDIX> </SUBPART> </PART> <PART> <EAR>Pt. 261</EAR> <HD SOURCE="HED">PART 261—IDENTIFICATION AND LISTING OF HAZARDOUS WASTE</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—General</HD> <SECHD>Sec.</SECHD> <SECTNO>261.1</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>261.2</SECTNO> <SUBJECT>Definition of solid waste.</SUBJECT> <SECTNO>261.3</SECTNO> <SUBJECT>Definition of hazardous waste.</SUBJECT> <SECTNO>261.4</SECTNO> <SUBJECT>Exclusions.</SUBJECT> <SECTNO>261.5</SECTNO> <SUBJECT>Special requirements for hazardous waste generated by conditionally exempt small quantity generators.</SUBJECT> <SECTNO>261.6</SECTNO> <SUBJECT>Requirements for recyclable materials.</SUBJECT> <SECTNO>261.7</SECTNO> <SUBJECT>Residues of hazardous waste in empty containers.</SUBJECT> <SECTNO>261.8</SECTNO> <SUBJECT>PCB wastes regulated under Toxic Substance Control Act.<PRTPAGE P="31"/> </SUBJECT> <SECTNO>261.9</SECTNO> <SUBJECT>Requirements for Universal Waste.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Criteria for Identifying the Characteristics of Hazardous Waste and for Listing Hazardous Waste</HD> <SECTNO>261.10</SECTNO> <SUBJECT>Criteria for identifying the characteristics of hazardous waste.</SUBJECT> <SECTNO>261.11</SECTNO> <SUBJECT>Criteria for listing hazardous waste.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Characteristics of Hazardous Waste</HD> <SECTNO>261.20</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>261.21</SECTNO> <SUBJECT>Characteristic of ignitability.</SUBJECT> <SECTNO>261.22</SECTNO> <SUBJECT>Characteristic of corrosivity.</SUBJECT> <SECTNO>261.23</SECTNO> <SUBJECT>Characteristic of reactivity.</SUBJECT> <SECTNO>261.24</SECTNO> <SUBJECT>Toxicity characteristic.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Lists of Hazardous Wastes</HD> <SECTNO>261.30</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>261.31</SECTNO> <SUBJECT>Hazardous wastes from non-specific sources.</SUBJECT> <SECTNO>261.32</SECTNO> <SUBJECT>Hazardous wastes from specific sources.</SUBJECT> <SECTNO>261.33</SECTNO> <SUBJECT>Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof.</SUBJECT> <SECTNO>261.35</SECTNO> <SUBJECT>Deletion of certain hazardous waste codes following equipment cleaning and replacement.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—Exclusions/Exemptions</HD> <SECTNO>261.38</SECTNO> <SUBJECT>Comparable/Syngas Fuel Exclusion.</SUBJECT> <SECTNO>261.39</SECTNO> <SUBJECT>Conditional Exclusion for Used, Broken Cathode Ray Tubes (CRTs) and Processed CRT Glass Undergoing Recycling.</SUBJECT> <SECTNO>261.40</SECTNO> <SUBJECT>Conditional Exclusion for Used, Intact Cathode Ray Tubes (CRTs) Exported for Recycling.</SUBJECT> <SECTNO>261.41</SECTNO> <SUBJECT>Notification and Recordkeeping for Used, Intact Cathode Ray Tubes (CRTs) Exported for Reuse.</SUBJECT> <APP>Appendix I to Part 261—Representative Sampling Methods</APP> <APP>Appendix II to Part 261 [Reserved]</APP> <APP>Appendix III to Part 261 [Reserved]</APP> <APP>Appendix IV to Part 261 [Reserved for Radioactive Waste Test Methods]</APP> <APP>Appendix V to Part 261 [Reserved for Infectious Waste Treatment Specifications]</APP> <APP>Appendix VI to Part 261 [Reserved for Etiologic Agents]</APP> <APP>Appendix VII to Part 261—Basis for Listing Hazardous Waste</APP> <APP>Appendix VIII to Part 261—Hazardous Constituents</APP> <APP>Appendix IX to Part 261—Wastes Excluded Under §§ 260.20 and 260.22</APP> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>42 U.S.C. 6905, 6912(a), 6921, 6922, 6924(y) and 6938.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>45 FR 33119, May 19, 1980, unless otherwise noted.</P> </SOURCE> <SUBPART> <HD SOURCE="HED">Subpart A—General</HD> <SECTION> <SECTNO>§ 261.1</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>(a) This part identifies those solid wastes which are subject to regulation as hazardous wastes under parts 262 through 265, 268, and parts 270, 271, and 124 of this chapter and which are subject to the notification requirements of section 3010 of RCRA. In this part:</P> <P>(1) Subpart A defines the terms “solid waste” and “hazardous waste”, identifies those wastes which are excluded from regulation under parts 262 through 266, 268 and 270 and establishes special management requirements for hazardous waste produced by conditionally exempt small quantity generators and hazardous waste which is recycled.</P> <P>(2) Subpart B sets forth the criteria used by EPA to identify characteristics of hazardous waste and to list particular hazardous wastes.</P> <P>(3) Subpart C identifies characteristics of hazardous waste.</P> <P>(4) Subpart D lists particular hazardous wastes.</P> <P>(b)(1) The definition of solid waste contained in this part applies only to wastes that also are hazardous for purposes of the regulations implementing subtitle C of RCRA. For example, it does not apply to materials (such as non-hazardous scrap, paper, textiles, or rubber) that are not otherwise hazardous wastes and that are recycled.</P> <P>(2) This part identifies only some of the materials which are solid wastes and hazardous wastes under sections 3007, 3013, and 7003 of RCRA. A material which is not defined as a solid waste in this part, or is not a hazardous waste identified or listed in this part, is still a solid waste and a hazardous waste for purposes of these sections if:</P> <P>(i) In the case of sections 3007 and 3013, EPA has reason to believe that the material may be a solid waste within the meaning of section 1004(27) of RCRA and a hazardous waste within the meaning of section 1004(5) of RCRA; or</P> <P>(ii) In the case of section 7003, the statutory elements are established.</P> <P>(c) For the purposes of §§ 261.2 and 261.6:</P> <P>(1) A “spent material” is any material that has been used and as a result <PRTPAGE P="32"/>of contamination can no longer serve the purpose for which it was produced without processing;</P> <P>(2) “Sludge” has the same meaning used in § 260.10 of this chapter;</P> <P>(3) A “by-product” is a material that is not one of the primary products of a production process and is not solely or separately produced by the production process. Examples are process residues such as slags or distillation column bottoms. The term does not include a co-product that is produced for the general public's use and is ordinarily used in the form it is produced by the process.</P> <P>(4) A material is “reclaimed” if it is processed to recover a usable product, or if it is regenerated. Examples are recovery of lead values from spent batteries and regeneration of spent solvents.</P> <P>(5) A material is “used or reused” if it is either:</P> <P>(i) Employed as an ingredient (including use as an intermediate) in an industrial process to make a product (for example, distillation bottoms from one process used as feedstock in another process). However, a material will not satisfy this condition if distinct components of the material are recovered as separate end products (as when metals are recovered from metal-containing secondary materials); or</P> <P>(ii) Employed in a particular function or application as an effective substitute for a commercial product (for example, spent pickle liquor used as phosphorous precipitant and sludge conditioner in wastewater treatment).</P> <P>(6) “Scrap metal” is bits and pieces of metal parts (e.g.,) bars, turnings, rods, sheets, wire) or metal pieces that may be combined together with bolts or soldering (e.g., radiators, scrap automobiles, railroad box cars), which when worn or superfluous can be recycled.</P> <P>(7) A material is “recycled” if it is used, reused, or reclaimed.</P> <P>(8) A material is “accumulated speculatively” if it is accumulated before being recycled. A material is not accumulated speculatively, however, if the person accumulating it can show that the material is potentially recyclable and has a feasible means of being recycled; and that—during the calendar year (commencing on January 1)—the amount of material that is recycled, or transferred to a different site for recycling, equals at least 75 percent by weight or volume of the amount of that material accumulated at the beginning of the period. In calculating the percentage of turnover, the 75 percent requirement is to be applied to each material of the same type (e.g., slags from a single smelting process) that is recycled in the same way (<E T="03">i.e.,</E> from which the same material is recovered or that is used in the same way). Materials accumulating in units that would be exempt from regulation under § 261.4(c) are not to be included in making the calculation. (Materials that are already defined as solid wastes also are not to be included in making the calculation.) Materials are no longer in this category once they are removed from accumulation for recycling, however.</P> <P>(9) “Excluded scrap metal” is processed scrap metal, unprocessed home scrap metal, and unprocessed prompt scrap metal.</P> <P>(10) “Processed scrap metal” is scrap metal which has been manually or physically altered to either separate it into distinct materials to enhance economic value or to improve the handling of materials. Processed scrap metal includes, but is not limited to scrap metal which has been baled, shredded, sheared, chopped, crushed, flattened, cut, melted, or separated by metal type (i.e., sorted), and, fines, drosses and related materials which have been agglomerated. (Note: shredded circuit boards being sent for recycling are not considered processed scrap metal. They are covered under the exclusion from the definition of solid waste for shredded circuit boards being recycled (§ 261.4(a)(13)).</P> <P>(11) “Home scrap metal” is scrap metal as generated by steel mills, foundries, and refineries such as turnings, cuttings, punchings, and borings.</P> <P>(12) “Prompt scrap metal” is scrap metal as generated by the metal working/fabrication industries and includes such scrap metal as turnings, cuttings, punchings, and borings. Prompt scrap <PRTPAGE P="33"/>is also known as industrial or new scrap metal.</P> <CITA>[45 FR 33119, May 19, 1980, as amended at 48 FR 14293, Apr. 1, 1983; 50 FR 663, Jan. 4, 1985; 51 FR 10174, Mar. 24, 1986; 51 FR 40636, Nov. 7, 1986; 62 FR 26018, May 12, 1997]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.2</SECTNO> <SUBJECT>Definition of solid waste.</SUBJECT> <P>(a)(1) A <E T="03">solid waste</E> is any discarded material that is not excluded by § 261.4(a) or that is not excluded by variance granted under §§ 260.30 and 260.31.</P> <P>(2) A <E T="03">discarded material</E> is any material which is:</P> <P>(i) <E T="03">Abandoned,</E> as explained in paragraph (b) of this section; or</P> <P>(ii) <E T="03">Recycled,</E> as explained in paragraph (c) of this section; or</P> <P>(iii) Considered <E T="03">inherently waste-like,</E> as explained in paragraph (d) of this section; or</P> <P>(iv) <E T="03">A military munition</E> identified as a solid waste in 40 CFR 266.202.</P> <P>(b) Materials are solid waste if they are <E T="03">abandoned</E> by being:</P> <P>(1) Disposed of; or</P> <P>(2) Burned or incinerated; or</P> <P>(3) Accumulated, stored, or treated (but not recycled) before or in lieu of being abandoned by being disposed of, burned, or incinerated.</P> <P>(c) Materials are solid wastes if they are <E T="03">recycled</E>—or accumulated, stored, or treated before recycling—as specified in paragraphs (c)(1) through (4) of this section.</P> <P>(1) <E T="03">Used in a manner constituting disposal.</E> (i) Materials noted with a “*” in Column 1 of Table 1 are solid wastes when they are:</P> <P>(A) Applied to or placed on the land in a manner that constitutes disposal; or</P> <P>(B) Used to produce products that are applied to or placed on the land or are otherwise contained in products that are applied to or placed on the land (in which cases the product itself remains a solid waste).</P> <P>(ii) However, commercial chemical products listed in § 261.33 are not solid wastes if they are applied to the land and that is their ordinary manner of use.</P> <P>(2) <E T="03">Burning for energy recovery.</E> (i) Materials noted with a “*” in column 2 of Table 1 are solid wastes when they are:</P> <P>(A) Burned to recover energy;</P> <P>(B) Used to produce a fuel or are otherwise contained in fuels (in which cases the fuel itself remains a solid waste).</P> <P>(ii) However, commercial chemical products listed in § 261.33 are not solid wastes if they are themselves fuels.</P> <P>(3) <E T="03">Reclaimed.</E> Materials noted with a “*” in column 3 of Table 1 are solid wastes when reclaimed (except as provided under § 261.4(a)(17)). Materials noted with a “—”in column 3 of Table 1 are not solid wastes when reclaimed.</P> <P>(4) <E T="03">Accumulated speculatively.</E> Materials noted with a “*” in column 4 of Table 1 are solid wastes when accumulated speculatively.</P> <GPOTABLE CDEF="s100,10C,10C,10C,10C" COLS="5" OPTS="L2"> <TDESC> <E T="04">Table 1</E> </TDESC> <BOXHD> <CHED H="1"/> <CHED H="1">Use constituting disposal (§ 261.2(c)(1))</CHED> <CHED H="1">Energy recovery/ fuel (§ 261.2(c)(2))</CHED> <CHED H="1">Reclamation (§ 261.2(c)(3)) (except as provided in 261.4(a)(17) for mineral processing secondary materials)</CHED> <CHED H="1">Speculative accumulation (§ 261.2(c)(4))</CHED> </BOXHD> <ROW RUL="s"> <ENT I="24"/> <ENT>1</ENT> <ENT>2</ENT> <ENT>3</ENT> <ENT>4</ENT> </ROW> <ROW> <ENT I="01">Spent Materials</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> </ROW> <ROW> <ENT I="01">Sludges (listed in 40 CFR Part 261.31 or 261.32</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> </ROW> <ROW> <ENT I="01">Sludges exhibiting a characteristic of hazardous waste</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>—</ENT> <ENT>(*)</ENT> </ROW> <ROW> <ENT I="01">By-products (listed in 40 CFR 261.31 or 261.32)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> </ROW> <ROW> <ENT I="01">By-products exhibiting a characteristic of hazardous waste</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>—</ENT> <ENT>(*)</ENT> </ROW> <ROW> <ENT I="01">Commercial chemical products listed in 40 CFR 261.33</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>—</ENT> <ENT>—</ENT> </ROW> <ROW> <ENT I="01">Scrap metal other than excluded scrap metal (see 261.1(c)(9))</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> <ENT>(*)</ENT> </ROW> <TNOTE> <E T="04">Note:</E> The terms “spent materials,” “sludges,” “by-products,” and “scrap metal” and “processed scrap metal” are defined in § 261.1.</TNOTE> </GPOTABLE> <PRTPAGE P="34"/> <P>(d) <E T="03">Inherently waste-like materials.</E> The following materials are solid wastes when they are recycled in any manner:</P> <P>(1) Hazardous Waste Nos. F020, F021 (unless used as an ingredient to make a product at the site of generation), F022, F023, F026, and F028.</P> <P>(2) Secondary materials fed to a halogen acid furnace that exhibit a characteristic of a hazardous waste or are listed as a hazardous waste as defined in subparts C or D of this part, except for brominated material that meets the following criteria:</P> <P>(i) The material must contain a bromine concentration of at least 45%; and</P> <P>(ii) The material must contain less than a total of 1% of toxic organic compounds listed in appendix VIII; and</P> <P>(iii) The material is processed continually on-site in the halogen acid furnace via direct conveyance (hard piping).</P> <P>(3) The Administrator will use the following criteria to add wastes to that list:</P> <P>(i)(A) The materials are ordinarily disposed of, burned, or incinerated; or</P> <P>(B) The materials contain toxic constituents listed in appendix VIII of part 261 and these constituents are not ordinarily found in raw materials or products for which the materials substitute (or are found in raw materials or products in smaller concentrations) and are not used or reused during the recycling process; and</P> <P>(ii) The material may pose a substantial hazard to human health and the environment when recycled.</P> <P>(e) <E T="03">Materials that are not solid waste when recycled.</E> (1) Materials are not solid wastes when they can be shown to be recycled by being:</P> <P>(i) Used or reused as ingredients in an industrial process to make a product, provided the materials are not being reclaimed; or</P> <P>(ii) Used or reused as effective substitutes for commercial products; or</P> <P>(iii) Returned to the original process from which they are generated, without first being reclaimed or land disposed. The material must be returned as a substitute for feedstock materials. In cases where the original process to which the material is returned is a secondary process, the materials must be managed such that there is no placement on the land. In cases where the materials are generated and reclaimed within the primary mineral processing industry, the conditions of the exclusion found at § 261.4(a)(17) apply rather than this paragraph.</P> <P>(2) The following materials are solid wastes, even if the recycling involves use, reuse, or return to the original process (described in paragraphs (e)(1) (i) through (iii) of this section):</P> <P>(i) Materials used in a manner constituting disposal, or used to produce products that are applied to the land; or</P> <P>(ii) Materials burned for energy recovery, used to produce a fuel, or contained in fuels; or</P> <P>(iii) Materials accumulated speculatively; or</P> <P>(iv) Materials listed in paragraphs (d)(1) and (d)(2) of this section.</P> <P>(f) <E T="03">Documentation of claims that materials are not solid wastes or are conditionally exempt from regulation.</E> Respondents in actions to enforce regulations implementing subtitle C of RCRA who raise a claim that a certain material is not a solid waste, or is conditionally exempt from regulation, must demonstrate that there is a known market or disposition for the material, and that they meet the terms of the exclusion or exemption. In doing so, they must provide appropriate documentation (such as contracts showing that a second person uses the material as an ingredient in a production process) to demonstrate that the material is not a waste, or is exempt from regulation. In addition, owners or operators of facilities claiming that they actually are recycling materials must show that they have the necessary equipment to do so.</P> <CITA>[50 FR 664, Jan. 4, 1985, as amended at 50 FR 33542, Aug. 20, 1985; 56 FR 7206, Feb. 21, 1991; 56 FR 32688, July 17, 1991; 56 FR 42512, Aug. 27, 1991; 57 FR 38564, Aug. 25, 1992; 59 FR 48042, Sept. 19, 1994; 62 FR 6651, Feb. 12, 1997; 62 FR 26019, May 12, 1997; 63 FR 28636, May 26, 1998; 64 FR 24513, May 11, 1999; 67 FR 11253, Mar. 13, 2002; 71 FR 40258, July 14, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.3</SECTNO> <SUBJECT>Definition of hazardous waste.</SUBJECT> <P>(a) A solid waste, as defined in § 261.2, is a hazardous waste if:</P> <P>(1) It is not excluded from regulation as a hazardous waste under § 261.4(b); and<PRTPAGE P="35"/> </P> <P>(2) It meets any of the following criteria:</P> <P>(i) It exhibits any of the characteristics of hazardous waste identified in subpart C of this part. However, any mixture of a waste from the extraction, beneficiation, and processing of ores and minerals excluded under § 261.4(b)(7) and any other solid waste exhibiting a characteristic of hazardous waste under subpart C is a hazardous waste only if it exhibits a characteristic that would not have been exhibited by the excluded waste alone if such mixture had not occurred, or if it continues to exhibit any of the characteristics exhibited by the non-excluded wastes prior to mixture. Further, for the purposes of applying the Toxicity Characteristic to such mixtures, the mixture is also a hazardous waste if it exceeds the maximum concentration for any contaminant listed in table 1 to § 261.24 that would not have been exceeded by the excluded waste alone if the mixture had not occurred or if it continues to exceed the maximum concentration for any contaminant exceeded by the nonexempt waste prior to mixture.</P> <P>(ii) It is listed in subpart D of this part and has not been excluded from the lists in subpart D of this part under §§ 260.20 and 260.22 of this chapter.</P> <P>(iii) [Reserved]</P> <P>(iv) It is a mixture of solid waste and one or more hazardous wastes listed in subpart D of this part and has not been excluded from paragraph (a)(2) of this section under §§ 260.20 and 260.22, paragraph (g) of this section, or paragraph (h) of this section; however, the following mixtures of solid wastes and hazardous wastes listed in subpart D of this part are not hazardous wastes (except by application of paragraph (a)(2)(i) or (ii) of this section) if the generator can demonstrate that the mixture consists of wastewater the discharge of which is subject to regulation under either section 402 or section 307(b) of the Clean Water Act (including wastewater at facilities which have eliminated the discharge of wastewater) and;</P> <P>(A) One or more of the following spent solvents listed in § 261.31—benzene, carbon tetrachloride, tetrachloroethylene, trichloroethylene or the scrubber waters derived-from the combustion of these spent solvents—<E T="03">Provided,</E> That the maximum total weekly usage of these solvents (other than the amounts that can be demonstrated not to be discharged to wastewater) divided by the average weekly flow of wastewater into the headworks of the facility's wastewater treatment or pretreatment system does not exceed 1 part per million, OR the total measured concentration of these solvents entering the headworks of the facility's wastewater treatment system (at facilities subject to regulation under the Clean Air Act, as amended, at 40 CFR parts 60, 61, or 63, or at facilities subject to an enforceable limit in a federal operating permit that minimizes fugitive emissions), does not exceed 1 part per million on an average weekly basis. Any facility that uses benzene as a solvent and claims this exemption must use an aerated biological wastewater treatment system and must use only lined surface impoundments or tanks prior to secondary clarification in the wastewater treatment system. Facilities that choose to measure concentration levels must file a copy of their sampling and analysis plan with the Regional Administrator, or State Director, as the context requires, or an authorized representative (“Director” as defined in 40 CFR 270.2). A facility must file a copy of a revised sampling and analysis plan only if the initial plan is rendered inaccurate by changes in the facility's operations. The sampling and analysis plan must include the monitoring point location (headworks), the sampling frequency and methodology, and a list of constituents to be monitored. A facility is eligible for the direct monitoring option once they receive confirmation that the sampling and analysis plan has been received by the Director. The Director may reject the sampling and analysis plan if he/she finds that, the sampling and analysis plan fails to include the above information; or the plan parameters would not enable the facility to calculate the weekly average concentration of these chemicals accurately. If the Director rejects the sampling and analysis plan or if the Director finds that the facility is not following the sampling and analysis plan, <PRTPAGE P="36"/>the Director shall notify the facility to cease the use of the direct monitoring option until such time as the bases for rejection are corrected; or</P> <P>(B) One or more of the following spent solvents listed in § 261.31-methylene chloride, 1,1,1-trichloroethane, chlorobenzene, o-dichlorobenzene, cresols, cresylic acid, nitrobenzene, toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, spent chlorofluorocarbon solvents, 2-ethoxyethanol, or the scrubber waters derived-from the combustion of these spent solvents—<E T="03">Provided</E> That the maximum total weekly usage of these solvents (other than the amounts that can be demonstrated not to be discharged to wastewater) divided by the average weekly flow of wastewater into the headworks of the facility's wastewater treatment or pretreatment system does not exceed 25 parts per million, OR the total measured concentration of these solvents entering the headworks of the facility's wastewater treatment system (at facilities subject to regulation under the Clean Air Act as amended, at 40 CFR parts 60, 61, or 63, or at facilities subject to an enforceable limit in a federal operating permit that minimizes fugitive emissions), does not exceed 25 parts per million on an average weekly basis. Facilities that choose to measure concentration levels must file a copy of their sampling and analysis plan with the Regional Administrator, or State Director, as the context requires, or an authorized representative (“Director” as defined in 40 CFR 270.2). A facility must file a copy of a revised sampling and analysis plan only if the initial plan is rendered inaccurate by changes in the facility's operations. The sampling and analysis plan must include the monitoring point location (headworks), the sampling frequency and methodology, and a list of constituents to be monitored. A facility is eligible for the direct monitoring option once they receive confirmation that the sampling and analysis plan has been received by the Director. The Director may reject the sampling and analysis plan if he/she finds that, the sampling and analysis plan fails to include the above information; or the plan parameters would not enable the facility to calculate the weekly average concentration of these chemicals accurately. If the Director rejects the sampling and analysis plan or if the Director finds that the facility is not following the sampling and analysis plan, the Director shall notify the facility to cease the use of the direct monitoring option until such time as the bases for rejection are corrected; or</P> <P>(C) One of the following wastes listed in § 261.32, provided that the wastes are discharged to the refinery oil recovery sewer before primary oil/water/solids separation—heat exchanger bundle cleaning sludge from the petroleum refining industry (EPA Hazardous Waste No. K050), crude oil storage tank sediment from petroleum refining operations (EPA Hazardous Waste No. K169), clarified slurry oil tank sediment and/or in-line filter/separation solids from petroleum refining operations (EPA Hazardous Waste No. K170), spent hydrotreating catalyst (EPA Hazardous Waste No. K171), and spent hydrorefining catalyst (EPA Hazardous Waste No. K172); or</P> <P>(D) A discarded hazardous waste, commercial chemical product, or chemical intermediate listed in §§ 261.31 through 261.33, arising from <E T="03">de minimis</E> losses of these materials. For purposes of this paragraph (a)(2)(iv)(D), <E T="03">de minimis</E> losses are inadvertent releases to a wastewater treatment system, including those from normal material handling operations (e.g., spills from the unloading or transfer of materials from bins or other containers, leaks from pipes, valves or other devices used to transfer materials); minor leaks of process equipment, storage tanks or containers; leaks from well maintained pump packings and seals; sample purgings; relief device discharges; discharges from safety showers and rinsing and cleaning of personal safety equipment; and rinsate from empty containers or from containers that are rendered empty by that rinsing. Any manufacturing facility that claims an exemption for <E T="03">de minimis</E> quantities of wastes listed in §§ 261.31 through 261.32, or any nonmanufacturing facility that claims an exemption for <E T="03">de minimis</E> quantities of wastes listed in subpart D of this part must either have eliminated the discharge of wastewaters or have included in its Clean Water Act <PRTPAGE P="37"/>permit application or submission to its pretreatment control authority the constituents for which each waste was listed (in 40 CFR 261 appendix VII) of this part; and the constituents in the table “Treatment Standards for Hazardous Wastes” in 40 CFR 268.40 for which each waste has a treatment standard (<E T="03">i.e.</E>, Land Disposal Restriction constituents). A facility is eligible to claim the exemption once the permit writer or control authority has been notified of possible <E T="03">de minimis</E> releases via the Clean Water Act permit application or the pretreatment control authority submission. A copy of the Clean Water permit application or the submission to the pretreatment control authority must be placed in the facility's on-site files; or</P> <P>(E) Wastewater resulting from laboratory operations containing toxic (T) wastes listed in subpart D of this part, Provided, That the annualized average flow of laboratory wastewater does not exceed one percent of total wastewater flow into the headworks of the facility's wastewater treatment or pre-treatment system or provided the wastes, combined annualized average concentration does not exceed one part per million in the headworks of the facility's wastewater treatment or pre-treatment facility. Toxic (T) wastes used in laboratories that are demonstrated not to be discharged to wastewater are not to be included in this calculation; or</P> <P>(F) One or more of the following wastes listed in § 261.32—wastewaters from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K157)—<E T="03">Provided</E> that the maximum weekly usage of formaldehyde, methyl chloride, methylene chloride, and triethylamine (including all amounts that cannot be demonstrated to be reacted in the process, destroyed through treatment, or is recovered, <E T="03">i.e.</E>, what is discharged or volatilized) divided by the average weekly flow of process wastewater prior to any dilution into the headworks of the facility's wastewater treatment system does not exceed a total of 5 parts per million by weight OR the total measured concentration of these chemicals entering the headworks of the facility's wastewater treatment system (at facilities subject to regulation under the Clean Air Act as amended, at 40 CFR parts 60, 61, or 63, or at facilities subject to an enforceable limit in a federal operating permit that minimizes fugitive emissions), does not exceed 5 parts per million on an average weekly basis. Facilities that choose to measure concentration levels must file copy of their sampling and analysis plan with the Regional Administrator, or State Director, as the context requires, or an authorized representative (“Director” as defined in 40 CFR 270.2). A facility must file a copy of a revised sampling and analysis plan only if the initial plan is rendered inaccurate by changes in the facility's operations. The sampling and analysis plan must include the monitoring point location (headworks), the sampling frequency and methodology, and a list of constituents to be monitored. A facility is eligible for the direct monitoring option once they receive confirmation that the sampling and analysis plan has been received by the Director. The Director may reject the sampling and analysis plan if he/she finds that, the sampling and analysis plan fails to include the above information; or the plan parameters would not enable the facility to calculate the weekly average concentration of these chemicals accurately. If the Director rejects the sampling and analysis plan or if the Director finds that the facility is not following the sampling and analysis plan, the Director shall notify the facility to cease the use of the direct monitoring option until such time as the bases for rejection are corrected; or</P> <P>(G) Wastewaters derived-from the treatment of one or more of the following wastes listed in § 261.32—organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K156).—<E T="03">Provided,</E> that the maximum concentration of formaldehyde, methyl chloride, methylene chloride, and triethylamine prior to any dilutions into the headworks of the facility's wastewater treatment system does not exceed a total of 5 milligrams per liter OR the total measured concentration of these chemicals entering the <PRTPAGE P="38"/>headworks of the facility's wastewater treatment system (at facilities subject to regulation under the Clean Air Act as amended, at 40 CFR parts 60, 61, or 63, or at facilities subject to an enforceable limit in a federal operating permit that minimizes fugitive emissions), does not exceed 5 milligrams per liter on an average weekly basis. Facilities that choose to measure concentration levels must file copy of their sampling and analysis plan with the Regional Administrator, or State Director, as the context requires, or an authorized representative (“Director” as defined in 40 CFR 270.2). A facility must file a copy of a revised sampling and analysis plan only if the initial plan is rendered inaccurate by changes in the facility's operations. The sampling and analysis plan must include the monitoring point location (headworks), the sampling frequency and methodology, and a list of constituents to be monitored. A facility is eligible for the direct monitoring option once they receive confirmation that the sampling and analysis plan has been received by the Director. The Director may reject the sampling and analysis plan if he/she finds that, the sampling and analysis plan fails to include the above information; or the plan parameters would not enable the facility to calculate the weekly average concentration of these chemicals accurately. If the Director rejects the sampling and analysis plan or if the Director finds that the facility is not following the sampling and analysis plan, the Director shall notify the facility to cease the use of the direct monitoring option until such time as the bases for rejection are corrected.</P> <P>(v) <E T="03">Rebuttable presumption for used oil.</E> Used oil containing more than 1000 ppm total halogens is presumed to be a hazardous waste because it has been mixed with halogenated hazardous waste listed in subpart D of part 261 of this chapter. Persons may rebut this presumption by demonstrating that the used oil does not contain hazardous waste (for example, to show that the used oil does not contain significant concentrations of halogenated hazardous constituents listed in appendix VIII of part 261 of this chapter).</P> <P>(b) A solid waste which is not excluded from regulation under paragraph (a)(1) of this section becomes a hazardous waste when any of the following events occur:</P> <P>(1) In the case of a waste listed in subpart D of this part, when the waste first meets the listing description set forth in subpart D of this part.</P> <P>(2) In the case of a mixture of solid waste and one or more listed hazardous wastes, when a hazardous waste listed in subpart D is first added to the solid waste.</P> <P>(3) In the case of any other waste (including a waste mixture), when the waste exhibits any of the characteristics identified in subpart C of this part.</P> <P>(c) Unless and until it meets the criteria of paragraph (d) of this section:</P> <P>(1) A hazardous waste will remain a hazardous waste.</P> <P>(2)(i) Except as otherwise provided in paragraph (c)(2)(ii), (g) or (h) of this section, any solid waste generated from the treatment, storage, or disposal of a hazardous waste, including any sludge, spill residue, ash emission control dust, or leachate (but not including precipitation run-off) is a hazardous waste. (However, materials that are reclaimed from solid wastes and that are used beneficially are not solid wastes and hence are not hazardous wastes under this provision unless the reclaimed material is burned for energy recovery or used in a manner constituting disposal.)</P> <P>(ii) The following solid wastes are not hazardous even though they are generated from the treatment, storage, or disposal of a hazardous waste, unless they exhibit one or more of the characteristics of hazardous waste:</P> <P>(A) Waste pickle liquor sludge generated by lime stabilization of spent pickle liquor from the iron and steel industry (SIC Codes 331 and 332).</P> <P>(B) Waste from burning any of the materials exempted from regulation by § 261.6(a)(3)(iii) and (iv).</P> <P>(C)(<E T="03">1</E>) Nonwastewater residues, such as slag, resulting from high temperature metals recovery (HTMR) processing of K061, K062 or F006 waste, in units identified as rotary kilns, flame reactors, electric furnaces, plasma arc furnaces, slag reactors, rotary hearth furnace/electric furnace combinations <PRTPAGE P="39"/>or industrial furnaces (as defined in paragraphs (6), (7), and (13) of the definition for “Industrial furnace” in 40 CFR 260.10), that are disposed in subtitle D units, provided that these residues meet the generic exclusion levels identified in the tables in this paragraph for all constituents, and exhibit no characteristics of hazardous waste. Testing requirements must be incorporated in a facility's waste analysis plan or a generator's self-implementing waste analysis plan; at a minimum, composite samples of residues must be collected and analyzed quarterly and/or when the process or operation generating the waste changes. Persons claiming this exclusion in an enforcement action will have the burden of proving by clear and convincing evidence that the material meets all of the exclusion requirements.</P> <GPOTABLE CDEF="s25,10.3" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">Constituent</CHED> <CHED H="1">Maximum for any single composite sample—TCLP (mg/l)</CHED> </BOXHD> <ROW EXPSTB="01" RUL="s"> <ENT I="21">Generic exclusion levels for K061 and K062 nonwastewater HTMR residues</ENT> </ROW> <ROW EXPSTB="00"> <ENT I="01">Antimony</ENT> <ENT>0.10</ENT> </ROW> <ROW> <ENT I="01">Arsenic</ENT> <ENT>0.50</ENT> </ROW> <ROW> <ENT I="01">Barium</ENT> <ENT>7.6</ENT> </ROW> <ROW> <ENT I="01">Beryllium</ENT> <ENT>0.010</ENT> </ROW> <ROW> <ENT I="01">Cadmium</ENT> <ENT>0.050</ENT> </ROW> <ROW> <ENT I="01">Chromium (total)</ENT> <ENT>0.33</ENT> </ROW> <ROW> <ENT I="01">Lead</ENT> <ENT>0.15</ENT> </ROW> <ROW> <ENT I="01">Mercury</ENT> <ENT>0.009</ENT> </ROW> <ROW> <ENT I="01">Nickel</ENT> <ENT>1.0</ENT> </ROW> <ROW> <ENT I="01">Selenium</ENT> <ENT>0.16</ENT> </ROW> <ROW> <ENT I="01">Silver</ENT> <ENT>0.30</ENT> </ROW> <ROW> <ENT I="01">Thallium</ENT> <ENT>0.020</ENT> </ROW> <ROW RUL="s"> <ENT I="01">Zinc</ENT> <ENT>70</ENT> </ROW> <ROW EXPSTB="01" RUL="s"> <ENT I="21">Generic exclusion levels for F006 nonwastewater HTMR residues</ENT> </ROW> <ROW EXPSTB="00"> <ENT I="01">Antimony</ENT> <ENT>0.10</ENT> </ROW> <ROW> <ENT I="01">Arsenic</ENT> <ENT>0.50</ENT> </ROW> <ROW> <ENT I="01">Barium</ENT> <ENT>7.6</ENT> </ROW> <ROW> <ENT I="01">Beryllium</ENT> <ENT>0.010</ENT> </ROW> <ROW> <ENT I="01">Cadmium</ENT> <ENT>0.050</ENT> </ROW> <ROW> <ENT I="01">Chromium (total)</ENT> <ENT>0.33</ENT> </ROW> <ROW> <ENT I="01">Cyanide (total) (mg/kg)</ENT> <ENT>1.8</ENT> </ROW> <ROW> <ENT I="01">Lead</ENT> <ENT>0.15</ENT> </ROW> <ROW> <ENT I="01">Mercury</ENT> <ENT>0.009</ENT> </ROW> <ROW> <ENT I="01">Nickel</ENT> <ENT>1.0</ENT> </ROW> <ROW> <ENT I="01">Selenium</ENT> <ENT>0.16</ENT> </ROW> <ROW> <ENT I="01">Silver</ENT> <ENT>0.30</ENT> </ROW> <ROW> <ENT I="01">Thallium</ENT> <ENT>0.020</ENT> </ROW> <ROW> <ENT I="01">Zinc</ENT> <ENT>70</ENT> </ROW> </GPOTABLE> <P>(<E T="03">2</E>) A one-time notification and certification must be placed in the facility's files and sent to the EPA region or authorized state for K061, K062 or F006 HTMR residues that meet the generic exclusion levels for all constituents and do not exhibit any characteristics that are sent to subtitle D units. The notification and certification that is placed in the generators or treaters files must be updated if the process or operation generating the waste changes and/or if the subtitle D unit receiving the waste changes. However, the generator or treater need only notify the EPA region or an authorized state on an annual basis if such changes occur. Such notification and certification should be sent to the EPA region or authorized state by the end of the calendar year, but no later than December 31. The notification must include the following information: The name and address of the subtitle D unit receiving the waste shipments; the EPA Hazardous Waste Number(s) and treatability group(s) at the initial point of generation; and, the treatment standards applicable to the waste at the initial point of generation. The certification must be signed by an authorized representative and must state as follows: “I certify under penalty of law that the generic exclusion levels for all constituents have been met without impermissible dilution and that no characteristic of hazardous waste is exhibited. I am aware that there are significant penalties for submitting a false certification, including the possibility of fine and imprisonment.”</P> <P>(D) Biological treatment sludge from the treatment of one of the following wastes listed in § 261.32—organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K156), and wastewaters from the production of carbamates and carbamoyl oximes (EPA Hazardous Waste No. K157).</P> <P>(E) Catalyst inert support media separated from one of the following wastes listed in § 261.32—Spent hydrotreating catalyst (EPA Hazardous Waste No. K171), and Spent hydrorefining catalyst (EPA Hazardous Waste No. K172).</P> <P>(d) Any solid waste described in paragraph (c) of this section is not a hazardous waste if it meets the following criteria:</P> <P>(1) In the case of any solid waste, it does not exhibit any of the characteristics of hazardous waste identified in <PRTPAGE P="40"/>subpart C of this part. (However, wastes that exhibit a characteristic at the point of generation may still be subject to the requirements of part 268, even if they no longer exhibit a characteristic at the point of land disposal.)</P> <P>(2) In the case of a waste which is a listed waste under subpart D of this part, contains a waste listed under subpart D of this part or is derived from a waste listed in subpart D of this part, it also has been excluded from paragraph (c) of this section under §§ 260.20 and 260.22 of this chapter.</P> <P>(e) [Reserved]</P> <P>(f) Notwithstanding paragraphs (a) through (d) of this section and provided the debris as defined in part 268 of this chapter does not exhibit a characteristic identified at subpart C of this part, the following materials are not subject to regulation under 40 CFR parts 260, 261 to 266, 268, or 270:</P> <P>(1) Hazardous debris as defined in part 268 of this chapter that has been treated using one of the required extraction or destruction technologies specified in Table 1 of § 268.45 of this chapter; persons claiming this exclusion in an enforcement action will have the burden of proving by clear and convincing evidence that the material meets all of the exclusion requirements; or</P> <P>(2) Debris as defined in part 268 of this chapter that the Regional Administrator, considering the extent of contamination, has determined is no longer contaminated with hazardous waste.</P> <P>(g)(1) A hazardous waste that is listed in subpart D of this part solely because it exhibits one or more characteristics of ignitability as defined under § 261.21, corrosivity as defined under § 261.22, or reactivity as defined under § 261.23 is not a hazardous waste, if the waste no longer exhibits any characteristic of hazardous waste identified in subpart C of this part.</P> <P>(2) The exclusion described in paragraph (g)(1) of this section also pertains to:</P> <P>(i) Any mixture of a solid waste and a hazardous waste listed in subpart D of this part solely because it exhibits the characteristics of ignitability, corrosivity, or reactivity as regulated under paragraph (a)(2)(iv) of this section; and</P> <P>(ii) Any solid waste generated from treating, storing, or disposing of a hazardous waste listed in subpart D of this part solely because it exhibits the characteristics of ignitability, corrosivity, or reactivity as regulated under paragraph (c)(2)(i) of this section.</P> <P>(3) Wastes excluded under this section are subject to part 268 of this chapter (as applicable), even if they no longer exhibit a characteristic at the point of land disposal.</P> <P>(4) Any mixture of a solid waste excluded from regulation under § 261.4(b)(7) and a hazardous waste listed in subpart D of this part solely because it exhibits one or more of the characteristics of ignitability, corrosivity, or reactivity as regulated under paragraph (a)(2)(iv) of this section is not a hazardous waste, if the mixture no longer exhibits any characteristic of hazardous waste identified in subpart C of this part for which the hazardous waste listed in subpart D of this part was listed.</P> <P>(h)(1) Hazardous waste containing radioactive waste is no longer a hazardous waste when it meets the eligibility criteria and conditions of 40 CFR part 266, Subpart N (“eligible radioactive mixed waste”).</P> <P>(2) The exemption described in paragraph (h)(1) of this section also pertains to:</P> <P>(i) Any mixture of a solid waste and an eligible radioactive mixed waste; and</P> <P>(ii) Any solid waste generated from treating, storing, or disposing of an eligible radioactive mixed waste.</P> <P>(3) Waste exempted under this section must meet the eligibility criteria and specified conditions in 40 CFR 266.225 and 40 CFR 266.230 (for storage and treatment) and in 40 CFR 266.310 and 40 CFR 266.315 (for transportation <PRTPAGE P="41"/>and disposal). Waste that fails to satisfy these eligibility criteria and conditions is regulated as hazardous waste.</P> <CITA>[57 FR 7632, Mar. 3, 1992; 57 FR 23063, June 1, 1992, as amended at 57 FR 37263, Aug. 18, 1992; 57 FR 41611, Sept. 10, 1992; 57 FR 49279, Oct. 30, 1992; 59 FR 38545, July 28, 1994; 60 FR 7848, Feb. 9, 1995; 63 FR 28637, May 26, 1998; 63 FR 42184, Aug. 6, 1998; 66 FR 27297, May 16, 2001; 66 FR 50333, Oct. 3, 2001; 70 FR 34561, June 14, 2005; 70 FR 57784, Oct. 4, 2005; 71 FR 40258, July 14, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.4</SECTNO> <SUBJECT>Exclusions.</SUBJECT> <EXT-XREF HREF="20080625" REFID="23">Link to an amendment published at 73 FR 35946, June 25, 2008.</EXT-XREF> <P>(a) <E T="03">Materials which are not solid wastes.</E> The following materials are not solid wastes for the purpose of this part:</P> <P>(1)(i) Domestic sewage; and</P> <P>(ii) Any mixture of domestic sewage and other wastes that passes through a sewer system to a publicly-owned treatment works for treatment. “Domestic sewage” means untreated sanitary wastes that pass through a sewer system.</P> <P>(2) Industrial wastewater discharges that are point source discharges subject to regulation under section 402 of the Clean Water Act, as amended. </P> <EXTRACT> <FP>[<E T="03">Comment:</E> This exclusion applies only to the actual point source discharge. It does not exclude industrial wastewaters while they are being collected, stored or treated before discharge, nor does it exclude sludges that are generated by industrial wastewater treatment.]</FP> </EXTRACT> <P>(3) Irrigation return flows.</P> <P>(4) Source, special nuclear or by-product material as defined by the Atomic Energy Act of 1954, as amended, 42 U.S.C. 2011 <E T="03">et seq.</E> </P> <P>(5) Materials subjected to in-situ mining techniques which are not removed from the ground as part of the extraction process.</P> <P>(6) Pulping liquors (<E T="03">i.e.,</E> black liquor) that are reclaimed in a pulping liquor recovery furnace and then reused in the pulping process, unless it is accumulated speculatively as defined in § 261.1(c) of this chapter.</P> <P>(7) Spent sulfuric acid used to produce virgin sulfuric acid, unless it is accumulated speculatively as defined in § 261.1(c) of this chapter.</P> <P>(8) Secondary materials that are reclaimed and returned to the original process or processes in which they were generated where they are reused in the production process provided:</P> <P>(i) Only tank storage is involved, and the entire process through completion of reclamation is closed by being entirely connected with pipes or other comparable enclosed means of conveyance;</P> <P>(ii) Reclamation does not involve controlled flame combustion (such as occurs in boilers, industrial furnaces, or incinerators);</P> <P>(iii) The secondary materials are never accumulated in such tanks for over twelve months without being reclaimed; and</P> <P>(iv) The reclaimed material is not used to produce a fuel, or used to produce products that are used in a manner constituting disposal.</P> <P>(9)(i) Spent wood preserving solutions that have been reclaimed and are reused for their original intended purpose; and</P> <P>(ii) Wastewaters from the wood preserving process that have been reclaimed and are reused to treat wood.</P> <P>(iii) Prior to reuse, the wood preserving wastewaters and spent wood preserving solutions described in paragraphs (a)(9)(i) and (a)(9)(ii) of this section, so long as they meet all of the following conditions:</P> <P>(A) The wood preserving wastewaters and spent wood preserving solutions are reused on-site at water borne plants in the production process for their original intended purpose;</P> <P>(B) Prior to reuse, the wastewaters and spent wood preserving solutions are managed to prevent release to either land or groundwater or both;</P> <P>(C) Any unit used to manage wastewaters and/or spent wood preserving solutions prior to reuse can be visually or otherwise determined to prevent such releases;</P> <P>(D) Any drip pad used to manage the wastewaters and/or spent wood preserving solutions prior to reuse complies with the standards in part 265, subpart W of this chapter, regardless of whether the plant generates a total of less than 100 kg/month of hazardous waste; and</P> <P>(E) Prior to operating pursuant to this exclusion, the plant owner or operator prepares a one-time notification stating that the plant intends to claim <PRTPAGE P="42"/>the exclusion, giving the date on which the plant intends to begin operating under the exclusion, and containing the following language: “I have read the applicable regulation establishing an exclusion for wood preserving wastewaters and spent wood preserving solutions and understand it requires me to comply at all times with the conditions set out in the regulation.” The plant must maintain a copy of that document in its on-site records until closure of the facility. The exclusion applies so long as the plant meets all of the conditions. If the plant goes out of compliance with any condition, it may apply to the appropriate Regional Administrator or state Director for reinstatement. The Regional Administrator or state Director may reinstate the exclusion upon finding that the plant has returned to compliance with all conditions and that the violations are not likely to recur.</P> <P>(10) EPA Hazardous Waste Nos. K060, K087, K141, K142, K143, K144, K145, K147, and K148, and any wastes from the coke by-products processes that are hazardous only because they exhibit the Toxicity Characteristic (TC) specified in section 261.24 of this part when, subsequent to generation, these materials are recycled to coke ovens, to the tar recovery process as a feedstock to produce coal tar, or mixed with coal tar prior to the tar's sale or refining. This exclusion is conditioned on there being no land disposal of the wastes from the point they are generated to the point they are recycled to coke ovens or tar recovery or refining processes, or mixed with coal tar.</P> <P>(11) Nonwastewater splash condenser dross residue from the treatment of K061 in high temperature metals recovery units, provided it is shipped in drums (if shipped) and not land disposed before recovery.</P> <P>(12)(i) Oil-bearing hazardous secondary materials (<E T="03">i.e.</E>, sludges, byproducts, or spent materials) that are generated at a petroleum refinery (SIC code 2911) and are inserted into the petroleum refining process (SIC code 2911—including, but not limited to, distillation, catalytic cracking, fractionation, gasification (as defined in 40 CFR 260.10) or thermal cracking units (i.e., cokers)) unless the material is placed on the land, or speculatively accumulated before being so recycled. Materials inserted into thermal cracking units are excluded under this paragraph, provided that the coke product also does not exhibit a characteristic of hazardous waste. Oil-bearing hazardous secondary materials may be inserted into the same petroleum refinery where they are generated, or sent directly to another petroleum refinery and still be excluded under this provision. Except as provided in paragraph (a)(12)(ii) of this section, oil-bearing hazardous secondary materials generated elsewhere in the petroleum industry (i.e., from sources other than petroleum refineries) are not excluded under this section. Residuals generated from processing or recycling materials excluded under this paragraph (a)(12)(i), where such materials as generated would have otherwise met a listing under subpart D of this part, are designated as F037 listed wastes when disposed of or intended for disposal.</P> <P>(ii) Recovered oil that is recycled in the same manner and with the same conditions as described in paragraph (a)(12)(i) of this section. Recovered oil is oil that has been reclaimed from secondary materials (including wastewater) generated from normal petroleum industry practices, including refining, exploration and production, bulk storage, and transportation incident thereto (SIC codes 1311, 1321, 1381, 1382, 1389, 2911, 4612, 4613, 4922, 4923, 4789, 5171, and 5172.) Recovered oil does not include oil-bearing hazardous wastes listed in subpart D of this part; however, oil recovered from such wastes may be considered recovered oil. Recovered oil does not include used oil as defined in 40 CFR 279.1.</P> <P>(13) Excluded scrap metal (processed scrap metal, unprocessed home scrap metal, and unprocessed prompt scrap metal) being recycled.</P> <P>(14) Shredded circuit boards being recycled provided that they are:</P> <P>(i) Stored in containers sufficient to prevent a release to the environment prior to recovery; and</P> <P>(ii) Free of mercury switches, mercury relays and nickel-cadmium batteries and lithium batteries.</P> <P>(15) Condensates derived from the overhead gases from kraft mill steam <PRTPAGE P="43"/>strippers that are used to comply with 40 CFR 63.446(e). The exemption applies only to combustion at the mill generating the condensates.</P> <P>(16) Comparable fuels or comparable syngas fuels (i.e., comparable/syngas fuels) that meet the requirements of § 261.38.</P> <P>(17) Spent materials (as defined in § 261.1) (other than hazardous wastes listed in subpart D of this part) generated within the primary mineral processing industry from which minerals, acids, cyanide, water, or other values are recovered by mineral processing or by beneficiation, provided that:</P> <P>(i) The spent material is legitimately recycled to recover minerals, acids, cyanide, water or other values;</P> <P>(ii) The spent material is not accumulated speculatively;</P> <P>(iii) Except as provided in paragraph (a)(17)(iv) of this section, the spent material is stored in tanks, containers, or buildings meeting the following minimum integrity standards: a building must be an engineered structure with a floor, walls, and a roof all of which are made of non-earthen materials providing structural support (except smelter buildings may have partially earthen floors provided the secondary material is stored on the non-earthen portion), and have a roof suitable for diverting rainwater away from the foundation; a tank must be free standing, not be a surface impoundment (as defined in 40 CFR 260.10), and be manufactured of a material suitable for containment of its contents; a container must be free standing and be manufactured of a material suitable for containment of its contents. If tanks or containers contain any particulate which may be subject to wind dispersal, the owner/operator must operate these units in a manner which controls fugitive dust. Tanks, containers, and buildings must be designed, constructed and operated to prevent significant releases to the environment of these materials.</P> <P>(iv) The Regional Administrator or State Director may make a site-specific determination, after public review and comment, that only solid mineral processing spent material may be placed on pads rather than tanks containers, or buildings. Solid mineral processing spent materials do not contain any free liquid. The decision-maker must affirm that pads are designed, constructed and operated to prevent significant releases of the secondary material into the environment. Pads must provide the same degree of containment afforded by the non-RCRA tanks, containers and buildings eligible for exclusion.</P> <P>(A) The decision-maker must also consider if storage on pads poses the potential for significant releases via groundwater, surface water, and air exposure pathways. Factors to be considered for assessing the groundwater, surface water, air exposure pathways are: The volume and physical and chemical properties of the secondary material, including its potential for migration off the pad; the potential for human or environmental exposure to hazardous constituents migrating from the pad via each exposure pathway, and the possibility and extent of harm to human and environmental receptors via each exposure pathway.</P> <P>(B) Pads must meet the following minimum standards: Be designed of non-earthen material that is compatible with the chemical nature of the mineral processing spent material, capable of withstanding physical stresses associated with placement and removal, have run on/runoff controls, be operated in a manner which controls fugitive dust, and have integrity assurance through inspections and maintenance programs.</P> <P>(C) Before making a determination under this paragraph, the Regional Administrator or State Director must provide notice and the opportunity for comment to all persons potentially interested in the determination. This can be accomplished by placing notice of this action in major local newspapers, or broadcasting notice over local radio stations.</P> <P>(v) The owner or operator provides notice to the Regional Administrator or State Director providing the following information: The types of materials to be recycled; the type and location of the storage units and recycling processes; and the annual quantities expected to be placed in land-based <PRTPAGE P="44"/>units. This notification must be updated when there is a change in the type of materials recycled or the location of the recycling process.</P> <P>(vi) For purposes of paragraph (a)(7) of this section, mineral processing spent materials must be the result of mineral processing and may not include any listed hazardous wastes. Listed hazardous wastes and characteristic hazardous wastes generated by non-mineral processing industries are not eligible for the conditional exclusion from the definition of solid waste.</P> <P>(18) Petrochemical recovered oil from an associated organic chemical manufacturing facility, where the oil is to be inserted into the petroleum refining process (SIC code 2911) along with normal petroleum refinery process streams, provided:</P> <P>(i) The oil is hazardous only because it exhibits the characteristic of ignitability (as defined in § 261.21) and/or toxicity for benzene (§ 261.24, waste code D018); and</P> <P>(ii) The oil generated by the organic chemical manufacturing facility is not placed on the land, or speculatively accumulated before being recycled into the petroleum refining process. An “associated organic chemical manufacturing facility” is a facility where the primary SIC code is 2869, but where operations may also include SIC codes 2821, 2822, and 2865; and is physically co-located with a petroleum refinery; and where the petroleum refinery to which the oil being recycled is returned also provides hydrocarbon feedstocks to the organic chemical manufacturing facility. “Petrochemical recovered oil” is oil that has been reclaimed from secondary materials (i.e., sludges, byproducts, or spent materials, including wastewater) from normal organic chemical manufacturing operations, as well as oil recovered from organic chemical manufacturing processes.</P> <P>(19) Spent caustic solutions from petroleum refining liquid treating processes used as a feedstock to produce cresylic or naphthenic acid unless the material is placed on the land, or accumulated speculatively as defined in § 261.1(c).</P> <P>(20) Hazardous secondary materials used to make zinc fertilizers, provided that the following conditions specified are satisfied:</P> <P>(i) Hazardous secondary materials used to make zinc micronutrient fertilizers must not be accumulated speculatively, as defined in § 261.1 (c)(8).</P> <P>(ii) Generators and intermediate handlers of zinc-bearing hazardous secondary materials that are to be incorporated into zinc fertilizers must:</P> <P>(A) Submit a one-time notice to the Regional Administrator or State Director in whose jurisdiction the exclusion is being claimed, which contains the name, address and EPA ID number of the generator or intermediate handler facility, provides a brief description of the secondary material that will be subject to the exclusion, and identifies when the manufacturer intends to begin managing excluded, zinc-bearing hazardous secondary materials under the conditions specified in this paragraph (a)(20).</P> <P>(B) Store the excluded secondary material in tanks, containers, or buildings that are constructed and maintained in a way that prevents releases of the secondary materials into the environment. At a minimum, any building used for this purpose must be an engineered structure made of non-earthen materials that provide structural support, and must have a floor, walls and a roof that prevent wind dispersal and contact with rainwater. Tanks used for this purpose must be structurally sound and, if outdoors, must have roofs or covers that prevent contact with wind and rain. Containers used for this purpose must be kept closed except when it is necessary to add or remove material, and must be in sound condition. Containers that are stored outdoors must be managed within storage areas that:</P> <P>(<E T="03">1</E>) Have containment structures or systems sufficiently impervious to contain leaks, spills and accumulated precipitation; and</P> <P>(<E T="03">2</E>) Provide for effective drainage and removal of leaks, spills and accumulated precipitation; and</P> <P>(<E T="03">3</E>) Prevent run-on into the containment system.</P> <P>(C) With each off-site shipment of excluded hazardous secondary materials, provide written notice to the receiving <PRTPAGE P="45"/>facility that the material is subject to the conditions of this paragraph (a)(20).</P> <P>(D) Maintain at the generator's or intermediate handlers's facility for no less than three years records of all shipments of excluded hazardous secondary materials. For each shipment these records must at a minimum contain the following information:</P> <P>(<E T="03">1</E>) Name of the transporter and date of the shipment;</P> <P>(<E T="03">2</E>) Name and address of the facility that received the excluded material, and documentation confirming receipt of the shipment; and</P> <P>(<E T="03">3</E>) Type and quantity of excluded secondary material in each shipment.</P> <P>(iii) Manufacturers of zinc fertilizers or zinc fertilizer ingredients made from excluded hazardous secondary materials must:</P> <P>(A) Store excluded hazardous secondary materials in accordance with the storage requirements for generators and intermediate handlers, as specified in paragraph (a)(20)(ii)(B) of this section.</P> <P>(B) Submit a one-time notification to the Regional Administrator or State Director that, at a minimum, specifies the name, address and EPA ID number of the manufacturing facility, and identifies when the manufacturer intends to begin managing excluded, zinc-bearing hazardous secondary materials under the conditions specified in this paragraph (a)(20).</P> <P>(C) Maintain for a minimum of three years records of all shipments of excluded hazardous secondary materials received by the manufacturer, which must at a minimum identify for each shipment the name and address of the generating facility, name of transporter and date the materials were received, the quantity received, and a brief description of the industrial process that generated the material.</P> <P>(D) Submit to the Regional Administrator or State Director an annual report that identifies the total quantities of all excluded hazardous secondary materials that were used to manufacture zinc fertilizers or zinc fertilizer ingredients in the previous year, the name and address of each generating facility, and the industrial process(s) from which they were generated.</P> <P>(iv) Nothing in this section preempts, overrides or otherwise negates the provision in § 262.11 of this chapter, which requires any person who generates a solid waste to determine if that waste is a hazardous waste.</P> <P>(v) Interim status and permitted storage units that have been used to store only zinc-bearing hazardous wastes prior to the submission of the one-time notice described in paragraph (a)(20)(ii)(A) of this section, and that afterward will be used only to store hazardous secondary materials excluded under this paragraph, are not subject to the closure requirements of 40 CFR Parts 264 and 265.</P> <P>(21) Zinc fertilizers made from hazardous wastes, or hazardous secondary materials that are excluded under paragraph (a)(20) of this section, provided that:</P> <P>(i) The fertilizers meet the following contaminant limits:</P> <P>(A) For metal contaminants:</P> <GPOTABLE CDEF="s25,10" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">Constituent</CHED> <CHED H="1">Maximum Allowable Total Concentration in Fertilizer, per Unit (1%) of Zinc (ppm)</CHED> </BOXHD> <ROW> <ENT I="01">Arsenic</ENT> <ENT>0.3</ENT> </ROW> <ROW> <ENT I="01">Cadmium</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="01">Chromium</ENT> <ENT>0.6</ENT> </ROW> <ROW> <ENT I="01">Lead</ENT> <ENT>2.8</ENT> </ROW> <ROW> <ENT I="01">Mercury</ENT> <ENT>0.3</ENT> </ROW> </GPOTABLE> <P>(B) For dioxin contaminants the fertilizer must contain no more than eight (8) parts per trillion of dioxin, measured as toxic equivalent (TEQ).</P> <P>(ii) The manufacturer performs sampling and analysis of the fertilizer product to determine compliance with the contaminant limits for metals no less than every six months, and for dioxins no less than every twelve months. Testing must also be performed whenever changes occur to manufacturing processes or ingredients that could significantly affect the amounts of contaminants in the fertilizer product. The manufacturer may use any reliable analytical method to demonstrate that no constituent of concern is present in the product at concentrations above the applicable limits. It is the responsibility of the <PRTPAGE P="46"/>manufacturer to ensure that the sampling and analysis are unbiased, precise, and representative of the product(s) introduced into commerce.</P> <P>(iii) The manufacturer maintains for no less than three years records of all sampling and analyses performed for purposes of determining compliance with the requirements of paragraph (a)(21)(ii) of this section. Such records must at a minimum include:</P> <P>(A) The dates and times product samples were taken, and the dates the samples were analyzed;</P> <P>(B) The names and qualifications of the person(s) taking the samples;</P> <P>(C) A description of the methods and equipment used to take the samples;</P> <P>(D) The name and address of the laboratory facility at which analyses of the samples were performed;</P> <P>(E) A description of the analytical methods used, including any cleanup and sample preparation methods; and</P> <P>(F) All laboratory analytical results used to determine compliance with the contaminant limits specified in this paragraph (a)(21).</P> <P>(22) Used cathode ray tubes (CRTs)</P> <P>(i) Used, intact CRTs as defined in § 260.10 of this chapter are not solid wastes within the United States unless they are disposed, or unless they are speculatively accumulated as defined in § 261.1(c)(8) by CRT collectors or glass processors.</P> <P>(ii) Used, intact CRTs as defined in § 260.10 of this chapter are not solid wastes when exported for recycling provided that they meet the requirements of § 261.40.</P> <P>(iii) Used, broken CRTs as defined in § 260.10 of this chapter are not solid wastes provided that they meet the requirements of § 261.39.</P> <P>(iv) Glass removed from CRTs is not a solid waste provided that it meets the requirements of § 261.39(c).</P> <P>(b) <E T="03">Solid wastes which are not hazardous wastes.</E> The following solid wastes are not hazardous wastes:</P> <P>(1) Household waste, including household waste that has been collected, transported, stored, treated, disposed, recovered (e.g., refuse-derived fuel) or reused. “Household waste” means any material (including garbage, trash and sanitary wastes in septic tanks) derived from households (including single and multiple residences, hotels and motels, bunkhouses, ranger stations, crew quarters, campgrounds, picnic grounds and day-use recreation areas). A resource recovery facility managing municipal solid waste shall not be deemed to be treating, storing, disposing of, or otherwise managing hazardous wastes for the purposes of regulation under this subtitle, if such facility:</P> <P>(i) Receives and burns only</P> <P>(A) Household waste (from single and multiple dwellings, hotels, motels, and other residential sources) and</P> <P>(B) Solid waste from commercial or industrial sources that does not contain hazardous waste; and</P> <P>(ii) Such facility does not accept hazardous wastes and the owner or operator of such facility has established contractual requirements or other appropriate notification or inspection procedures to assure that hazardous wastes are not received at or burned in such facility.</P> <P>(2) Solid wastes generated by any of the following and which are returned to the soils as fertilizers:</P> <P>(i) The growing and harvesting of agricultural crops.</P> <P>(ii) The raising of animals, including animal manures.</P> <P>(3) Mining overburden returned to the mine site.</P> <P>(4) Fly ash waste, bottom ash waste, slag waste, and flue gas emission control waste, generated primarily from the combusion of coal or other fossil fuels, except as provided by § 266.112 of this chapter for facilities that burn or process hazardous waste.</P> <P>(5) Drilling fluids, produced waters, and other wastes associated with the exploration, development, or production of crude oil, natural gas or geothermal energy.</P> <P>(6)(i) Wastes which fail the test for the Toxicity Characteristic because chromium is present or are listed in subpart D due to the presence of chromium, which do not fail the test for the Toxicity Characteristic for any other constituent or are not listed due to the presence of any other constituent, and which do not fail the test for any other characteristic, if it is shown by a waste generator or by waste generators that:<PRTPAGE P="47"/> </P> <P>(A) The chromium in the waste is exclusively (or nearly exclusively) trivalent chromium; and</P> <P>(B) The waste is generated from an industrial process which uses trivalent chromium exclusively (or nearly exclusively) and the process does not generate hexavalent chromium; and</P> <P>(C) The waste is typically and frequently managed in non-oxidizing environments.</P> <P>(ii) Specific wastes which meet the standard in paragraphs (b)(6)(i) (A), (B), and (C) (so long as they do not fail the test for the toxicity characteristic for any other constituent, and do not exhibit any other characteristic) are:</P> <P>(A) Chrome (blue) trimmings generated by the following subcategories of the leather tanning and finishing industry; hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.</P> <P>(B) Chrome (blue) shavings generated by the following subcategories of the leather tanning and finishing industry: Hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.</P> <P>(C) Buffing dust generated by the following subcategories of the leather tanning and finishing industry; hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue.</P> <P>(D) Sewer screenings generated by the following subcategories of the leather tanning and finishing industry: Hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.</P> <P>(E) Wastewater treatment sludges generated by the following subcategories of the leather tanning and finishing industry: Hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; retan/wet finish; no beamhouse; through-the-blue; and shearling.</P> <P>(F) Wastewater treatment sludges generated by the following subcategories of the leather tanning and finishing industry: Hair pulp/chrome tan/retan/wet finish; hair save/chrome tan/retan/wet finish; and through-the-blue.</P> <P>(G) Waste scrap leather from the leather tanning industry, the shoe manufacturing industry, and other leather product manufacturing industries.</P> <P>(H) Wastewater treatment sludges from the production of TiO<E T="52">2</E> pigment using chromium-bearing ores by the chloride process.</P> <P>(7) Solid waste from the extraction, beneficiation, and processing of ores and minerals (including coal, phosphate rock, and overburden from the mining of uranium ore), except as provided by § 266.112 of this chapter for facilities that burn or process hazardous waste.</P> <P>(i) For purposes of § 261.4(b)(7) beneficiation of ores and minerals is restricted to the following activities; crushing; grinding; washing; dissolution; crystallization; filtration; sorting; sizing; drying; sintering; pelletizing; briquetting; calcining to remove water and/or carbon dioxide; roasting, autoclaving, and/or chlorination in preparation for leaching (except where the roasting (and/or autoclaving and/or chlorination)/leaching sequence produces a final or intermediate product that does not undergo further beneficiation or processing); gravity concentration; magnetic separation; electrostatic separation; flotation; ion exchange; solvent extraction; electrowinning; precipitation; amalgamation; and heap, dump, vat, tank, and in situ leaching.</P> <P>(ii) For the purposes of § 261.4(b)(7), solid waste from the processing of ores and minerals includes only the following wastes as generated:</P> <P>(A) Slag from primary copper processing;</P> <P>(B) Slag from primary lead processing;</P> <P>(C) Red and brown muds from bauxite refining;</P> <P>(D) Phosphogypsum from phosphoric acid production;</P> <P>(E) Slag from elemental phosphorus production;</P> <P>(F) Gasifier ash from coal gasification;</P> <P>(G) Process wastewater from coal gasification;</P> <P>(H) Calcium sulfate wastewater treatment plant sludge from primary copper processing;<PRTPAGE P="48"/> </P> <P>(I) Slag tailings from primary copper processing;</P> <P>(J) Fluorogypsum from hydrofluoric acid production;</P> <P>(K) Process wastewater from hydrofluoric acid production;</P> <P>(L) Air pollution control dust/sludge from iron blast furnaces;</P> <P>(M) Iron blast furnace slag;</P> <P>(N) Treated residue from roasting/leaching of chrome ore;</P> <P>(O) Process wastewater from primary magnesium processing by the anhydrous process;</P> <P>(P) Process wastewater from phosphoric acid production;</P> <P>(Q) Basic oxygen furnace and open hearth furnace air pollution control dust/sludge from carbon steel production;</P> <P>(R) Basic oxygen furnace and open hearth furnace slag from carbon steel production;</P> <P>(S ) Chloride process waste solids from titanium tetrachloride production;</P> <P>(T) Slag from primary zinc processing.</P> <P>(iii) A residue derived from co-processing mineral processing secondary materials with normal beneficiation raw materials or with normal mineral processing raw materials remains excluded under paragraph (b) of this section if the owner or operator:</P> <P>(A) Processes at least 50 percent by weight normal beneficiation raw materials or normal mineral processing raw materials; and,</P> <P>(B) Legitimately reclaims the secondary mineral processing materials.</P> <P>(8) Cement kiln dust waste, except as provided by § 266.112 of this chapter for facilities that burn or process hazardous waste.</P> <P>(9) Solid waste which consists of discarded arsenical-treated wood or wood products which fails the test for the Toxicity Characteristic for Hazardous Waste Codes D004 through D017 and which is not a hazardous waste for any other reason if the waste is generated by persons who utilize the arsenical-treated wood and wood products for these materials' intended end use.</P> <P>(10) Petroleum-contaminated media and debris that fail the test for the Toxicity Characteristic of § 261.24 (Hazardous Waste Codes D018 through D043 only) and are subject to the corrective action regulations under part 280 of this chapter.</P> <P>(11) Injected groundwater that is hazardous only because it exhibits the Toxicity Characteristic (Hazardous Waste Codes D018 through D043 only) in § 261.24 of this part that is reinjected through an underground injection well pursuant to free phase hydrocarbon recovery operations undertaken at petroleum refineries, petroleum marketing terminals, petroleum bulk plants, petroleum pipelines, and petroleum transportation spill sites until January 25, 1993. This extension applies to recovery operations in existence, or for which contracts have been issued, on or before March 25, 1991. For groundwater returned through infiltration galleries from such operations at petroleum refineries, marketing terminals, and bulk plants, until [insert date six months after publication]. New operations involving injection wells (beginning after March 25, 1991) will qualify for this compliance date extension (until January 25, 1993) only if:</P> <P>(i) Operations are performed pursuant to a written state agreement that includes a provision to assess the groundwater and the need for further remediation once the free phase recovery is completed; and</P> <P>(ii) A copy of the written agreement has been submitted to: Waste Identification Branch (5304), U.S. Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.</P> <P>(12) Used chlorofluorocarbon refrigerants from totally enclosed heat transfer equipment, including mobile air conditioning systems, mobile refrigeration, and commercial and industrial air conditioning and refrigeration systems that use chlorofluorocarbons as the heat transfer fluid in a refrigeration cycle, provided the refrigerant is reclaimed for further use.</P> <P>(13) Non-terne plated used oil filters that are not mixed with wastes listed in subpart D of this part if these oil filters have been gravity hot-drained using one of the following methods:</P> <P>(i) Puncturing the filter anti-drain back valve or the filter dome end and hot-draining;</P> <P>(ii) Hot-draining and crushing;<PRTPAGE P="49"/> </P> <P>(iii) Dismantling and hot-draining; or</P> <P>(iv) Any other equivalent hot-draining method that will remove used oil.</P> <P>(14) Used oil re-refining distillation bottoms that are used as feedstock to manufacture asphalt products.</P> <P>(15) Leachate or gas condensate collected from landfills where certain solid wastes have been disposed, provided that:</P> <P>(i) The solid wastes disposed would meet one or more of the listing descriptions for Hazardous Waste Codes K169, K170, K171, K172, K174, K175, K176, K177, K178 and K181 if these wastes had been generated after the effective date of the listing;</P> <P>(ii) The solid wastes described in paragraph (b)(15)(i) of this section were disposed prior to the effective date of the listing;</P> <P>(iii) The leachate or gas condensate do not exhibit any characteristic of hazardous waste nor are derived from any other listed hazardous waste;</P> <P>(iv) Discharge of the leachate or gas condensate, including leachate or gas condensate transferred from the landfill to a POTW by truck, rail, or dedicated pipe, is subject to regulation under sections 307(b) or 402 of the Clean Water Act.</P> <P>(v) As of February 13, 2001, leachate or gas condensate derived from K169-K172 is no longer exempt if it is stored or managed in a surface impoundment prior to discharge. As of November 21, 2003, leachate or gas condensate derived from K176, K177, and K178 is no longer exempt if it is stored or managed in a surface impoundment prior to discharge. After February 26, 2007, leachate or gas condensate derived from K181 will no longer be exempt if it is stored or managed in a surface impoundment prior to discharge. There is one exception: if the surface impoundment is used to temporarily store leachate or gas condensate in response to an emergency situation (e.g., shutdown of wastewater treatment system), provided the impoundment has a double liner, and provided the leachate or gas condensate is removed from the impoundment and continues to be managed in compliance with the conditions of this paragraph (b)(15)(v) after the emergency ends.</P> <P>(16) Sludges resulting from the treatment of wastewaters (not including spent plating solutions) generated by the copper metallization process at the International Business Machines Corporation (IBM) semiconductor manufacturing facility in Essex Junction, VT, are exempt from the F006 listing, provided that:</P> <P>(i) IBM provides the Agency with semi-annual reports (by January 15 and July 15 of each year) detailing constituent analyses measuring the concentrations of volatiles, semi-volatiles, and metals using methods presented in part 264, appendix IX of this chapter of both the plating solution utilized by, and the rinsewaters generated by, the copper metallization process;</P> <P>(ii) IBM provides the agency with semi-annual reports (by January 15 and July 15 of each year), through the year 2004, or when IBM has achieved its facility-wide goal of a 40% reduction in greenhouse gas emissions from a 1995 base year (when normalized to production), whichever is first, that contain the following:</P> <P>(A) Estimated greenhouse gas emissions, and estimated greenhouse gas emission reductions. Greenhouse gas emissions will be reported in terms of total mass emitted and mass emitted normalized to production; and</P> <P>(B) The number of chemical vapor deposition chambers used in the semiconductor manufacturing production line that have been converted to either low flow C<E T="52">2</E>F<E T="52">6</E> or NF<E T="52">3</E> during the reporting period and the number of such chambers remaining to be converted to achieve the facility goal for global warming gas emission reductions.</P> <P>(iii) No significant changes are made to the copper metallization process such that any of the constituents listed in 40 CFR part 261, appendix VII as the basis for the F006 listing are introduced into the process.</P> <P>(17) Solid waste that would otherwise meet the definition of low-level mixed wastes (LLMW) pursuant to § 266.210 of this chapter that is generated at the Ortho-McNeil Pharmaceutical, Inc. (OMP Spring House) research and development facility in Spring House, Pennsylvania and treated on-site using <PRTPAGE P="50"/>a bench-scale high temperature catalytic oxidation unit is not a hazardous waste provided that:</P> <P>(i) The total volume of LLMW generated and treated is no greater than 50 liters/year, (ii) OMP Spring House submits a written report to the EPA Region III office once every six months beginning six months after June 27, 2005, that must contain the following:</P> <P>(A) Analysis demonstrating the destruction and removal efficiency of the treatment technology for all organic components of the wastestream,</P> <P>(B) Analysis demonstrating the capture efficiencies of the treatment technology for all radioactive components of the wastestream and an estimate of the amount of radioactivity released during the reporting period,</P> <P>(C) Analysis (including concentrations of constituents, including inorganic constituents, present and radioactivity) of the wastestream prior to and after treatment,</P> <P>(D) Volume of the wastestream being treated per batch, as well as a total for the duration of the reporting period, and</P> <P>(E) Final disposition of the radioactive residuals from the treatment of the wastestream.</P> <P>(iii) OMP Spring House makes no significant changes to the design or operation of the high temperature catalytic oxidation unit or the wastestream.</P> <P>(iv) This exclusion will remain in affect for 5 years from June 27, 2005.</P> <P>(18) By-products resulting from the production of automobile air bag gas generants at the Autoliv ASP Inc. facility in Promontory Utah, (Autoliv) are exempt from the D003 listing, for a period of five years from May 9, 2001, provided that:</P> <P>(i) The by-product gas generants are processed on-site in Autoliv's Metal Recovery Furnace (MRF).</P> <P>(A) By-product gas generants must only be fed to the MRF when it is operating in conformance with the State of Utah, Division of Air Quality's Approval Order DAQE-549-97.</P> <P>(B) Combustion gas temperature must be maintained below 400 degrees Fahrenheit at the baghouse inlet.</P> <P>(ii) Prior to processing in the MRF, the by-product gas generants are managed in accordance with the requirements specified in 40 CFR 262.34.</P> <P>(iii) The Autoliv facility and the MRF are operated and managed in accordance with the requirements of 40 CFR Part 265, Subparts B, C, D, E, G, H, I, and O.</P> <P>(iv) Residues derived from the processing of by-product gas generants in the MRF are managed in accordance with the requirements specified in 40 CFR Parts 262 and 268.</P> <P>(v) The following testing of the MRF's stack gas emissions is conducted:</P> <P>(A) An initial test shall be conducted within 30 operating days of starting feed of by-product gas generants to the MRF. EPA may extend this deadline, at the request of Autoliv, when good cause is shown. The initial test shall consist of three duplicate runs sampling for:</P> <P>(<E T="03">1</E>) Particulate matter using Method 5 as specified in 40 CFR Part 60, Appendix A.</P> <P>(<E T="03">2</E>) The metals Aluminum, Arsenic, Barium, Beryllium, Boron, Cadmium, Chromium, Cobalt, Copper, Lead, and Nickel using Method 29 as specified in 40 CFR Part 60, Appendix A.</P> <P>(<E T="03">3</E>) Polychlorinated di-benzo dioxins and furans using Method 23 0023A as specified in 40 CFR Part 60, Appendix A.</P> <P>(<E T="03">4</E>) Carbon monoxide using Method 10 as specified in 40 CFR Part 60, Appendix A.</P> <P>(B) After the initial test is completed, an annual stack test (12 months from the previous initial stack test) of the MRF shall be conducted. The annual tests shall consist of three duplicate runs using Method 29 and Method 5 as specified in 40 CFR Part 60, Appendix A.</P> <P>(C) Testing shall be conducted while by-product gas generants are fed to the MRF at no less than 90% of the planned maximum feed rate, and with the MRF operating parameters within normal ranges.</P> <P>(D) Initial stack testing results and additional project performance data and information, including the quantity of by-product gas generants processed and the operating parameter values during the test runs, will be submitted by Autoliv to the State of Utah <PRTPAGE P="51"/>and EPA within 60 days of the completion of the initial stack test.</P> <P>(E) Annual stack test results and additional project performance data and information, including the quantity of by-product gas generants processed and the operating parameter values during the test runs, will be submitted by Autoliv to EPA and the State of Utah within 60 days of the completion of the annual test.</P> <P>(vi) Combustion gas discharged to the atmosphere from the MRF meets the following limits:</P> <P>(A) Dioxin emissions do not exceed 0.4 ng per dry standard cubic meter on a toxicity equivalent quotient (TEQ) basis corrected to 7% Oxygen.</P> <P>(B) Combined lead and cadmium emissions do not exceed 240 ug per dry standard cubic meter corrected to 7% Oxygen.</P> <P>(C) Combined arsenic, beryllium, and chromium emissions do not exceed 97 ug per dry standard cubic meter corrected to 7% Oxygen.</P> <P>(D) Particulate matter emissions do not exceed 34 mg per dry standard cubic meter corrected to 7% Oxygen.</P> <P>(E) If the limits specified in paragraphs (b)(18)(vi)(A) through (D) of this section are exceeded, Autoliv shall discontinue feeding gas generants to the MRF until such time as Autoliv can demonstrate to EPA and the state of Utah satisfaction that the MRF combustion gas emissions can meet the limits specified in paragraphs (b)(18)(vi) (A) through (D) of this section</P> <P>(vii) No by-product gas generants or other pyrotechnic wastes generated off-site will be received at the Autoliv facility in Promontory, Utah or processed in the MRF unless otherwise allowed by law (permit or regulation).</P> <P>(viii) Autoliv will provide EPA and the state of Utah with semi-annual reports (by January 30 and July 30 of each year).</P> <P>(A) The semi-annual reports will document the amounts of by-product gas generants processed during the reporting period.</P> <P>(B) The semi-annual reports will provide a summary of the MRF Operating Record during the reporting period, including information on by-product gas generant composition, average feed rates, upset conditions, and spills or releases.</P> <P>(ix) No significant changes are made to the operating parameter production values of Autoliv's production of air bag gas generants such that any of the constituents listed in appendix VIII of this part are introduced into the process.</P> <P>(x) Autoliv reports to the EPA any noncompliance which may endanger health or the environment orally within 24 hours from the time Autoliv becomes aware of the circumstances, including:</P> <P>(A) Any information of a release, discharge, fire, or explosion from the MRF, which could threaten the environment or human health.</P> <P>(B) The description of the occurrence and its cause shall include:</P> <P>(<E T="03">1</E>) Name, address, and telephone number of the facility;</P> <P>(<E T="03">2</E>) Date, time, and type of incident;</P> <P>(<E T="03">3</E>) Name and quantity of material(s) involved;</P> <P>(<E T="03">4</E>) The extent of injuries, if any;</P> <P>(<E T="03">5</E>) An assessment of actual or potential hazards to the environment and human health, and</P> <P>(<E T="03">6</E>) Estimated quantity and disposition of recovered material that resulted from the incident.</P> <P>(C) A written notice shall also be provided within five days of the time Autoliv becomes aware of the circumstances. The written notice shall contain a description of the non-compliance and its cause; the period of noncompliance including exact dates and times, and if the noncompliance has not been corrected, the anticipated time it is expected to continue; and steps taken or planned to reduce, eliminate, and prevent reoccurrence of the noncompliance. The EPA may waive the five day written notice requirement in favor of a written report within fifteen days.</P> <P>(xi) Notifications and submissions made under paragraph (b)(18) of this section shall be sent to the Regional Assistant Administrator for the Office of Partnerships and Regulatory Assistance, U.S. EPA, Region 8 and the Executive Secretary of the Utah Solid and Hazardous Waste Control Board.</P> <P>(c) Hazardous wastes which are exempted from certain regulations. A <PRTPAGE P="52"/>hazardous waste which is generated in a product or raw material storage tank, a product or raw material transport vehicle or vessel, a product or raw material pipeline, or in a manufacturing process unit or an associated non-waste-treatment-manufacturing unit, is not subject to regulation under parts 262 through 265, 268, 270, 271 and 124 of this chapter or to the notification requirements of section 3010 of RCRA until it exits the unit in which it was generated, unless the unit is a surface impoundment, or unless the hazardous waste remains in the unit more than 90 days after the unit ceases to be operated for manufacturing, or for storage or transportation of product or raw materials.</P> <P>(d) <E T="03">Samples.</E> (1) Except as provided in paragraph (d)(2) of this section, a sample of solid waste or a sample of water, soil, or air, which is collected for the sole purpose of testing to determine its characteristics or composition, is not subject to any requirements of this part or parts 262 through 268 or part 270 or part 124 of this chapter or to the notification requirements of section 3010 of RCRA, when:</P> <P>(i) The sample is being transported to a laboratory for the purpose of testing; or</P> <P>(ii) The sample is being transported back to the sample collector after testing; or</P> <P>(iii) The sample is being stored by the sample collector before transport to a laboratory for testing; or</P> <P>(iv) The sample is being stored in a laboratory before testing; or</P> <P>(v) The sample is being stored in a laboratory after testing but before it is returned to the sample collector; or</P> <P>(vi) The sample is being stored temporarily in the laboratory after testing for a specific purpose (for example, until conclusion of a court case or enforcement action where further testing of the sample may be necessary).</P> <P>(2) In order to qualify for the exemption in paragraphs (d)(1) (i) and (ii) of this section, a sample collector shipping samples to a laboratory and a laboratory returning samples to a sample collector must:</P> <P>(i) Comply with U.S. Department of Transportation (DOT), U.S. Postal Service (USPS), or any other applicable shipping requirements; or</P> <P>(ii) Comply with the following requirements if the sample collector determines that DOT, USPS, or other shipping requirements do not apply to the shipment of the sample:</P> <P>(A) Assure that the following information accompanies the sample:</P> <P>(<E T="03">1</E>) The sample collector's name, mailing address, and telephone number;</P> <P>(<E T="03">2</E>) The laboratory's name, mailing address, and telephone number;</P> <P>(<E T="03">3</E>) The quantity of the sample;</P> <P>(<E T="03">4</E>) The date of shipment; and</P> <P>(<E T="03">5</E>) A description of the sample.</P> <P>(B) Package the sample so that it does not leak, spill, or vaporize from its packaging.</P> <P>(3) This exemption does not apply if the laboratory determines that the waste is hazardous but the laboratory is no longer meeting any of the conditions stated in paragraph (d)(1) of this section.</P> <P>(e) <E T="03">Treatability Study Samples.</E> (1) Except as provided in paragraph (e)(2) of this section, persons who generate or collect samples for the purpose of conducting treatability studies as defined in section 260.10, are not subject to any requirement of parts 261 through 263 of this chapter or to the notification requirements of Section 3010 of RCRA, nor are such samples included in the quantity determinations of § 261.5 and § 262.34(d) when:</P> <P>(i) The sample is being collected and prepared for transportation by the generator or sample collector; or</P> <P>(ii) The sample is being accumulated or stored by the generator or sample collector prior to transportation to a laboratory or testing facility; or</P> <P>(iii) The sample is being transported to the laboratory or testing facility for the purpose of conducting a treatability study.</P> <P>(2) The exemption in paragraph (e)(1) of this section is applicable to samples of hazardous waste being collected and shipped for the purpose of conducting treatability studies provided that:</P> <P>(i) The generator or sample collector uses (in “treatability studies”) no more than 10,000 kg of media contaminated with non-acute hazardous waste, 1000 kg of non-acute hazardous waste <PRTPAGE P="53"/>other than contaminated media, 1 kg of acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste for each process being evaluated for each generated waste stream; and</P> <P>(ii) The mass of each sample shipment does not exceed 10,000 kg; the 10,000 kg quantity may be all media contaminated with non-acute hazardous waste, or may include 2500 kg of media contaminated with acute hazardous waste, 1000 kg of hazardous waste, and 1 kg of acute hazardous waste; and</P> <P>(iii) The sample must be packaged so that it will not leak, spill, or vaporize from its packaging during shipment and the requirements of paragraph A or B of this subparagraph are met.</P> <P>(A) The transportation of each sample shipment complies with U.S. Department of Transportation (DOT), U.S. Postal Service (USPS), or any other applicable shipping requirements; or</P> <P>(B) If the DOT, USPS, or other shipping requirements do not apply to the shipment of the sample, the following information must accompany the sample:</P> <P>(<E T="03">1</E>) The name, mailing address, and telephone number of the originator of the sample;</P> <P>(<E T="03">2</E>) The name, address, and telephone number of the facility that will perform the treatability study;</P> <P>(<E T="03">3</E>) The quantity of the sample;</P> <P>(<E T="03">4</E>) The date of shipment; and</P> <P>(<E T="03">5</E>) A description of the sample, including its EPA Hazardous Waste Number.</P> <P>(iv) The sample is shipped to a laboratory or testing facility which is exempt under § 261.4(f) or has an appropriate RCRA permit or interim status.</P> <P>(v) The generator or sample collector maintains the following records for a period ending 3 years after completion of the treatability study:</P> <P>(A) Copies of the shipping documents;</P> <P>(B) A copy of the contract with the facility conducting the treatability study;</P> <P>(C) Documentation showing:</P> <P>(<E T="03">1</E>) The amount of waste shipped under this exemption;</P> <P>(<E T="03">2</E>) The name, address, and EPA identification number of the laboratory or testing facility that received the waste;</P> <P>(<E T="03">3</E>) The date the shipment was made; and</P> <P>(<E T="03">4</E>) Whether or not unused samples and residues were returned to the generator.</P> <P>(vi) The generator reports the information required under paragraph (e)(2)(v)(C) of this section in its biennial report.</P> <P>(3) The Regional Administrator may grant requests on a case-by-case basis for up to an additional two years for treatability studies involving bioremediation. The Regional Administrator may grant requests on a case-by-case basis for quantity limits in excess of those specified in paragraphs (e)(2) (i) and (ii) and (f)(4) of this section, for up to an additional 5000 kg of media contaminated with non-acute hazardous waste, 500 kg of non-acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste and 1 kg of acute hazardous waste:</P> <P>(i) In response to requests for authorization to ship, store and conduct treatability studies on additional quantities in advance of commencing treatability studies. Factors to be considered in reviewing such requests include the nature of the technology, the type of process (e.g., batch versus continuous), size of the unit undergoing testing (particularly in relation to scale-up considerations), the time/quantity of material required to reach steady state operating conditions, or test design considerations such as mass balance calculations.</P> <P>(ii) In response to requests for authorization to ship, store and conduct treatability studies on additional quantities after initiation or completion of initial treatability studies, when: There has been an equipment or mechanical failure during the conduct of a treatability study; there is a need to verify the results of a previously conducted treatability study; there is a need to study and analyze alternative techniques within a previously evaluated treatment process; or there is a need to do further evaluation of an ongoing treatability study to determine final specifications for treatment.</P> <P>(iii) The additional quantities and timeframes allowed in paragraph (e)(3) <PRTPAGE P="54"/>(i) and (ii) of this section are subject to all the provisions in paragraphs (e) (1) and (e)(2) (iii) through (vi) of this section. The generator or sample collector must apply to the Regional Administrator in the Region where the sample is collected and provide in writing the following information:</P> <P>(A) The reason why the generator or sample collector requires additional time or quantity of sample for treatability study evaluation and the additional time or quantity needed;</P> <P>(B) Documentation accounting for all samples of hazardous waste from the waste stream which have been sent for or undergone treatability studies including the date each previous sample from the waste stream was shipped, the quantity of each previous shipment, the laboratory or testing facility to which it was shipped, what treatability study processes were conducted on each sample shipped, and the available results on each treatability study;</P> <P>(C) A description of the technical modifications or change in specifications which will be evaluated and the expected results;</P> <P>(D) If such further study is being required due to equipment or mechanical failure, the applicant must include information regarding the reason for the failure or breakdown and also include what procedures or equipment improvements have been made to protect against further breakdowns; and</P> <P>(E) Such other information that the Regional Administrator considers necessary.</P> <P>(f) <E T="03">Samples Undergoing Treatability Studies at Laboratories and Testing Facilities.</E> Samples undergoing treatability studies and the laboratory or testing facility conducting such treatability studies (to the extent such facilities are not otherwise subject to RCRA requirements) are not subject to any requirement of this part, part 124, parts 262-266, 268, and 270, or to the notification requirements of Section 3010 of RCRA provided that the conditions of paragraphs (f) (1) through (11) of this section are met. A mobile treatment unit (MTU) may qualify as a testing facility subject to paragraphs (f) (1) through (11) of this section. Where a group of MTUs are located at the same site, the limitations specified in (f) (1) through (11) of this section apply to the entire group of MTUs collectively as if the group were one MTU.</P> <P>(1) No less than 45 days before conducting treatability studies, the facility notifies the Regional Administrator, or State Director (if located in an authorized State), in writing that it intends to conduct treatability studies under this paragraph.</P> <P>(2) The laboratory or testing facility conducting the treatability study has an EPA identification number.</P> <P>(3) No more than a total of 10,000 kg of “as received” media contaminated with non-acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste or 250 kg of other “as received” hazardous waste is subject to initiation of treatment in all treatability studies in any single day. “As received” waste refers to the waste as received in the shipment from the generator or sample collector.</P> <P>(4) The quantity of “as received” hazardous waste stored at the facility for the purpose of evaluation in treatability studies does not exceed 10,000 kg, the total of which can include 10,000 kg of media contaminated with non-acute hazardous waste, 2500 kg of media contaminated with acute hazardous waste, 1000 kg of non-acute hazardous wastes other than contaminated media, and 1 kg of acute hazardous waste. This quantity limitation does not include treatment materials (including nonhazardous solid waste) added to “as received” hazardous waste.</P> <P>(5) No more than 90 days have elapsed since the treatability study for the sample was completed, or no more than one year (two years for treatability studies involving bioremediation) have elapsed since the generator or sample collector shipped the sample to the laboratory or testing facility, whichever date first occurs. Up to 500 kg of treated material from a particular waste stream from treatability studies may be archived for future evaluation up to five years from the date of initial receipt. Quantities of materials archived are counted against the total storage limit for the facility.</P> <P>(6) The treatability study does not involve the placement of hazardous <PRTPAGE P="55"/>waste on the land or open burning of hazardous waste.</P> <P>(7) The facility maintains records for 3 years following completion of each study that show compliance with the treatment rate limits and the storage time and quantity limits. The following specific information must be included for each treatability study conducted:</P> <P>(i) The name, address, and EPA identification number of the generator or sample collector of each waste sample;</P> <P>(ii) The date the shipment was received;</P> <P>(iii) The quantity of waste accepted;</P> <P>(iv) The quantity of “as received” waste in storage each day;</P> <P>(v) The date the treatment study was initiated and the amount of “as received” waste introduced to treatment each day;</P> <P>(vi) The date the treatability study was concluded;</P> <P>(vii) The date any unused sample or residues generated from the treatability study were returned to the generator or sample collector or, if sent to a designated facility, the name of the facility and the EPA identification number.</P> <P>(8) The facility keeps, on-site, a copy of the treatability study contract and all shipping papers associated with the transport of treatability study samples to and from the facility for a period ending 3 years from the completion date of each treatability study.</P> <P>(9) The facility prepares and submits a report to the Regional Administrator, or state Director (if located in an authorized state), by March 15 of each year, that includes the following information for the previous calendar year:</P> <P>(i) The name, address, and EPA identification number of the facility conducting the treatability studies;</P> <P>(ii) The types (by process) of treatability studies conducted;</P> <P>(iii) The names and addresses of persons for whom studies have been conducted (including their EPA identification numbers);</P> <P>(iv) The total quantity of waste in storage each day;</P> <P>(v) The quantity and types of waste subjected to treatability studies;</P> <P>(vi) When each treatability study was conducted;</P> <P>(vii) The final disposition of residues and unused sample from each treatability study.</P> <P>(10) The facility determines whether any unused sample or residues generated by the treatability study are hazardous waste under § 261.3 and, if so, are subject to parts 261 through 268, and part 270 of this chapter, unless the residues and unused samples are returned to the sample originator under the § 261.4(e) exemption.</P> <P>(11) The facility notifies the Regional Administrator, or State Director (if located in an authorized State), by letter when the facility is no longer planning to conduct any treatability studies at the site.</P> <P>(g) <E T="03">Dredged material that is not a hazardous waste.</E> Dredged material that is subject to the requirements of a permit that has been issued under 404 of the Federal Water Pollution Control Act (33 U.S.C.1344) or section 103 of the Marine Protection, Research, and Sanctuaries Act of 1972 (33 U.S.C. 1413) is not a hazardous waste. For this paragraph (g), the following definitions apply:</P> <P>(1) The term <E T="03">dredged material</E> has the same meaning as defined in 40 CFR 232.2;</P> <P>(2) The term <E T="03">permit</E> means:</P> <P>(i) A permit issued by the U.S. Army Corps of Engineers (Corps) or an approved State under section 404 of the Federal Water Pollution Control Act (33 U.S.C. 1344);</P> <P>(ii) A permit issued by the Corps under section 103 of the Marine Protection, Research, and Sanctuaries Act of 1972 (33 U.S.C. 1413); or</P> <P>(iii) In the case of Corps civil works projects, the administrative equivalent of the permits referred to in paragraphs (g)(2)(i) and (ii) of this section, as provided for in Corps regulations (for example, see 33 CFR 336.1, 336.2, and 337.6).</P> <CITA>[45 FR 33119, May 19, 1980]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 261.4, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> <EFFDNOTP> <HD SOURCE="HED">Effective Date Note:</HD> <P>At 73 FR 35946, June 25, 2008, § 261.4 was amended by removing and <PRTPAGE P="56"/>reserving paragraph (b)(16), effective July 25, 2008.</P> </EFFDNOTP> </SECTION> <SECTION> <SECTNO>§ 261.5</SECTNO> <SUBJECT>Special requirements for hazardous waste generated by conditionally exempt small quantity generators.</SUBJECT> <P>(a) A generator is a conditionally exempt small quantity generator in a calendar month if he generates no more than 100 kilograms of hazardous waste in that month.</P> <P>(b) Except for those wastes identified in paragraphs (e), (f), (g), and (j) of this section, a conditionally exempt small quantity generator's hazardous wastes are not subject to regulation under parts 262 through 266, 268, and parts 270 and 124 of this chapter, and the notification requirements of section 3010 of RCRA, provided the generator complies with the requirements of paragraphs (f), (g), and (j) of this section.</P> <P>(c) When making the quantity determinations of this part and 40 CFR part 262, the generator must include all hazardous waste that it generates, except hazardous waste that:</P> <P>(1) Is exempt from regulation under 40 CFR 261.4(c) through (f), 261.6(a)(3), 261.7(a)(1), or 261.8; or</P> <P>(2) Is managed immediately upon generation only in on-site elementary neutralization units, wastewater treatment units, or totally enclosed treatment facilities as defined in 40 CFR 260.10; or</P> <P>(3) Is recycled, without prior storage or accumulation, only in an on-site process subject to regulation under 40 CFR 261.6(c)(2); or</P> <P>(4) Is used oil managed under the requirements of 40 CFR 261.6(a)(4) and 40 CFR part 279; or</P> <P>(5) Is spent lead-acid batteries managed under the requirements of 40 CFR part 266, subpart G; or</P> <P>(6) Is universal waste managed under 40 CFR 261.9 and 40 CFR part 273.</P> <P>(d) In determining the quantity of hazardous waste generated, a generator need not include:</P> <P>(1) Hazardous waste when it is removed from on-site storage; or</P> <P>(2) Hazardous waste produced by on-site treatment (including reclamation) of his hazardous waste, so long as the hazardous waste that is treated was counted once; or</P> <P>(3) Spent materials that are generated, reclaimed, and subsequently reused on-site, so long as such spent materials have been counted once.</P> <P>(e) If a generator generates acute hazardous waste in a calendar month in quantities greater than set forth below, all quantities of that acute hazardous waste are subject to full regulation under parts 262 through 266, 268, and parts 270 and 124 of this chapter, and the notification requirements of section 3010 of RCRA:</P> <P>(1) A total of one kilogram of acute hazardous wastes listed in §§ 261.31, 261.32, or 261.33(e).</P> <P>(2) A total of 100 kilograms of any residue or contaminated soil, waste, or other debris resulting from the clean-up of a spill, into or on any land or water, of any acute hazardous wastes listed in §§ 261.31, 261.32, or 261.33(e).</P> <EXTRACT> <P>[Comment: “Full regulation” means those regulations applicable to generators of greater than 1,000 kg of non-acutely hazardous waste in a calendar month.]</P> </EXTRACT> <P>(f) In order for acute hazardous wastes generated by a generator of acute hazardous wastes in quantities equal to or less than those set forth in paragraph (e)(1) or (2) of this section to be excluded from full regulation under this section, the generator must comply with the following requirements:</P> <P>(1) Section 262.11 of this chapter;</P> <P>(2) The generator may accumulate acute hazardous waste on-site. If he accumulates at any time acute hazardous wastes in quantities greater than those set forth in paragraph (e)(1) or (e)(2) of this section, all of those accumulated wastes are subject to regulation under parts 262 through 266, 268, and parts 270 and 124 of this chapter, and the applicable notification requirements of section 3010 of RCRA. The time period of § 262.34(a) of this chapter, for accumulation of wastes on-site, begins when the accumulated wastes exceed the applicable exclusion limit;</P> <P>(3) A conditionally exempt small quantity generator may either treat or dispose of his acute hazardous waste in an on-site facility or ensure delivery to an off-site treatment, storage, or disposal facility, either of which, if located in the U.S., is:</P> <P>(i) Permitted under part 270 of this chapter;<PRTPAGE P="57"/> </P> <P>(ii) In interim status under parts 270 and 265 of this chapter;</P> <P>(iii) Authorized to manage hazardous waste by a State with a hazardous waste management program approved under part 271 of this chapter;</P> <P>(iv) Permitted, licensed, or registered by a State to manage municipal solid waste and, if managed in a municipal solid waste landfill is subject to Part 258 of this chapter;</P> <P>(v) Permitted, licensed, or registered by a State to manage non-municipal non-hazardous waste and, if managed in a non-municipal non-hazardous waste disposal unit after January 1, 1998, is subject to the requirements in §§ 257.5 through 257.30 of this chapter; or</P> <P>(vi) A facility which:</P> <P>(A) Beneficially uses or reuses, or legitimately recycles or reclaims its waste; or</P> <P>(B) Treats its waste prior to beneficial use or reuse, or legitimate recycling or reclamation; or</P> <P>(vii) For universal waste managed under part 273 of this chapter, a universal waste handler or destination facility subject to the requirements of part 273 of this chapter.</P> <P>(g) In order for hazardous waste generated by a conditionally exempt small quantity generator in quantities of less than 100 kilograms of hazardous waste during a calendar month to be excluded from full regulation under this section, the generator must comply with the following requirements:</P> <P>(1) Section 262.11 of this chapter;</P> <P>(2) The conditionally exempt small quantity generator may accumulate hazardous waste on-site. If he accumulates at any time more than a total of 1000 kilograms of his hazardous wastes, all of those accumulated wastes are subject to regulation under the special provisions of part 262 applicable to generators of between 100 kg and 1000 kg of hazardous waste in a calendar month as well as the requirements of parts 263 through 266, 268, and parts 270 and 124 of this chapter, and the applicable notification requirements of section 3010 of RCRA. The time period of § 262.34(d) for accumulation of wastes on-site begins for a conditionally exempt small quantity generator when the accumulated wastes exceed 1000 kilograms;</P> <P>(3) A conditionally exempt small quantity generator may either treat or dispose of his hazardous waste in an on-site facility or ensure delivery to an off-site treatment, storage or disposal facility, either of which, if located in the U.S., is:</P> <P>(i) Permitted under part 270 of this chapter;</P> <P>(ii) In interim status under parts 270 and 265 of this chapter;</P> <P>(iii) Authorized to manage hazardous waste by a State with a hazardous waste management program approved under part 271 of this chapter;</P> <P>(iv) Permitted, licensed, or registered by a State to manage municipal solid waste and, if managed in a municipal solid waste landfill is subject to Part 258 of this chapter;</P> <P>(v) Permitted, licensed, or registered by a State to manage non-municipal non-hazardous waste and, if managed in a non-municipal non-hazardous waste disposal unit after January 1, 1998, is subject to the requirements in §§ 257.5 through 257.30 of this chapter; or</P> <P>(vi) A facility which:</P> <P>(A) Beneficially uses or reuses, or legitimately recycles or reclaims its waste; or</P> <P>(B) Treats its waste prior to beneficial use or reuse, or legitimate recycling or reclamation; or</P> <P>(vii) For universal waste managed under part 273 of this chapter, a universal waste handler or destination facility subject to the requirements of part 273 of this chapter.</P> <P>(h) Hazardous waste subject to the reduced requirements of this section may be mixed with non-hazardous waste and remain subject to these reduced requirements even though the resultant mixture exceeds the quantity limitations identified in this section, unless the mixture meets any of the characteristics of hazardous waste identified in subpart C.</P> <P>(i) If any person mixes a solid waste with a hazardous waste that exceeds a quantity exclusion level of this section, the mixture is subject to full regulation.</P> <P>(j) If a conditionally exempt small quantity generator's wastes are mixed with used oil, the mixture is subject to part 279 of this chapter. Any material <PRTPAGE P="58"/>produced from such a mixture by processing, blending, or other treatment is also so regulated.</P> <CITA>[51 FR 10174, Mar. 24, 1986, as amended at 51 FR 28682, Aug. 8, 1986; 51 FR 40637, Nov. 7, 1986; 53 FR 27163, July 19, 1988; 58 FR 26424, May 3, 1993; 60 FR 25541, May 11, 1995; 61 FR 34278, July 1, 1996; 63 FR 24968, May 6, 1998; 63 FR 37782, July 14, 1998; 68 FR 44665, July 30, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.6</SECTNO> <SUBJECT>Requirements for recyclable materials.</SUBJECT> <P>(a)(1) Hazardous wastes that are recycled are subject to the requirements for generators, transporters, and storage facilities of paragraphs (b) and (c) of this section, except for the materials listed in paragraphs (a)(2) and (a)(3) of this section. Hazardous wastes that are recycled will be known as “recyclable materials.”</P> <P>(2) The following recyclable materials are not subject to the requirements of this section but are regulated under subparts C through O of part 266 of this chapter and all applicable provisions in parts 270 and 124 of this chapter:</P> <P>(i) Recyclable materials used in a manner constituting disposal (40 CFR part 266, subpart C);</P> <P>(ii) Hazardous wastes burned for energy recovery in boilers and industrial furnaces that are not regulated under subpart O of part 264 or 265 of this chapter (40 CFR part 266, subpart H);</P> <P>(iii) Recyclable materials from which precious metals are reclaimed (40 CFR part 266, subpart F);</P> <P>(iv) Spent lead-acid batteries that are being reclaimed (40 CFR part 266, subpart G).</P> <P>(v) U.S. Filter Recovery Services XL waste (40 CFR part 266, subpart O).</P> <P>(3) The following recyclable materials are not subject to regulation under parts 262 through parts 266 or parts 268, 270 or 124 of this chapter, and are not subject to the notification requirements of section 3010 of RCRA:</P> <P>(i) Industrial ethyl alcohol that is reclaimed except that, unless provided otherwise in an international agreement as specified in § 262.58:</P> <P>(A) A person initiating a shipment for reclamation in a foreign country, and any intermediary arranging for the shipment, must comply with the requirements applicable to a primary exporter in §§ 262.53, 262.56 (a)(1)-(4), (6), and (b), and 262.57, export such materials only upon consent of the receiving country and in conformance with the EPA Acknowledgment of Consent as defined in subpart E of part 262, and provide a copy of the EPA Acknowledgment of Consent to the shipment to the transporter transporting the shipment for export;</P> <P>(B) Transporters transporting a shipment for export may not accept a shipment if he knows the shipment does not conform to the EPA Acknowledgment of Consent, must ensure that a copy of the EPA Acknowledgment of Consent accompanies the shipment and must ensure that it is delivered to the facility designated by the person initiating the shipment.</P> <P>(ii) Scrap metal that is not excluded under § 261.4(a)(13);</P> <P>(iii) Fuels produced from the refining of oil-bearing hazardous waste along with normal process streams at a petroleum refining facility if such wastes result from normal petroleum refining, production, and transportation practices (this exemption does not apply to fuels produced from oil recovered from oil-bearing hazardous waste, where such recovered oil is already excluded under § 261.4(a)(12);</P> <P>(iv)(A) Hazardous waste fuel produced from oil-bearing hazardous wastes from petroleum refining, production, or transportation practices, or produced from oil reclaimed from such hazardous wastes, where such hazardous wastes are reintroduced into a process that does not use distillation or does not produce products from crude oil so long as the resulting fuel meets the used oil specification under § 279.11 of this chapter and so long as no other hazardous wastes are used to produce the hazardous waste fuel;</P> <P>(B) Hazardous waste fuel produced from oil-bearing hazardous waste from petroleum refining production, and transportation practices, where such hazardous wastes are reintroduced into a refining process after a point at which contaminants are removed, so long as the fuel meets the used oil fuel specification under § 279.11 of this chapter; and<PRTPAGE P="59"/> </P> <P>(C) Oil reclaimed from oil-bearing hazardous wastes from petroleum refining, production, and transportation practices, which reclaimed oil is burned as a fuel without reintroduction to a refining process, so long as the reclaimed oil meets the used oil fuel specification under § 279.11 of this chapter.</P> <P>(4) Used oil that is recycled and is also a hazardous waste solely because it exhibits a hazardous characteristic is not subject to the requirements of parts 260 through 268 of this chapter, but is regulated under part 279 of this chapter. Used oil that is recycled includes any used oil which is reused, following its original use, for any purpose (including the purpose for which the oil was originally used). Such term includes, but is not limited to, oil which is re-refined, reclaimed, burned for energy recovery, or reprocessed.</P> <P>(5) Hazardous waste that is exported to or imported from designated member countries of the Organization for Economic Cooperation and Development (OECD) (as defined in § 262.58(a)(1)) for purpose of recovery is subject to the requirements of 40 CFR part 262, subpart H, if it is subject to either the Federal manifesting requirements of 40 CFR Part 262, to the universal waste management standards of 40 CFR Part 273, or to State requirements analogous to 40 CFR Part 273.</P> <P>(b) Generators and transporters of recyclable materials are subject to the applicable requirements of parts 262 and 263 of this chapter and the notification requirements under section 3010 of RCRA, except as provided in paragraph (a) of this section.</P> <P>(c)(1) Owners and operators of facilities that store recyclable materials before they are recycled are regulated under all applicable provisions of subparts A though L, AA, BB, and CC of parts 264 and 265, and under parts 124, 266, 268, and 270 of this chapter and the notification requirements under section 3010 of RCRA, except as provided in paragraph (a) of this section. (The recycling process itself is exempt from regulation except as provided in § 261.6(d).)</P> <P>(2) Owners or operators of facilities that recycle recyclable materials without storing them before they are recycled are subject to the following requirements, except as provided in paragraph (a) of this section:</P> <P>(i) Notification requirements under section 3010 of RCRA;</P> <P>(ii) Sections 265.71 and 265.72 (dealing with the use of the manifest and manifest discrepancies) of this chapter.</P> <P>(iii) Section 261.6(d) of this chapter.</P> <P>(d) Owners or operators of facilities subject to RCRA permitting requirements with hazardous waste management units that recycle hazardous wastes are subject to the requirements of subparts AA and BB of part 264 or 265 of this chapter.</P> <CITA>[50 FR 49203, Nov. 29, 1985, as amended at 51 FR 28682, Aug. 8, 1986; 51 FR 40637, Nov. 7, 1986; 52 FR 11821, Apr. 13, 1987; 55 FR 25493, June 21, 1990; 56 FR 7207, Feb. 21, 1991; 56 FR 32692, July 17, 1991; 57 FR 41612, Sept. 10, 1992; 59 FR 38545, July 28, 1994; 60 FR 25541, May 11, 1995; 61 FR 16309, Apr. 12, 1996; 61 FR 59950, Nov. 25, 1996; 62 FR 26019, May 12, 1997; 63 FR 24968, May 6, 1998; 63 FR 42185, Aug. 6, 1998; 66 FR 28085, May 22, 2001; 71 FR 40259, July 14, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.7</SECTNO> <SUBJECT>Residues of hazardous waste in empty containers.</SUBJECT> <P>(a)(1) Any hazardous waste remaining in either: (i) an empty container; or (ii) an inner liner removed from an empty container, as defined in paragraph (b) of this section, is not subject to regulation under parts 261 through 265, 267, 268, 270, or 124 this chapter or to the notification requirements of section 3010 of RCRA.</P> <P>(2) Any hazardous waste in either (i) a container that is not empty or (ii) an inner liner removed from a container that is not empty, as defined in paragraph (b) of this section, is subject to regulation under parts 261 through 265, and parts 268, 270 and 124 of this chapter and to the notification requirements of section 3010 of RCRA.</P> <P>(b)(1) A container or an inner liner removed from a container that has held any hazardous waste, except a waste that is a compressed gas or that is identified as an acute hazardous waste listed in §§ 261.31, 261.32, or 261.33(e) of this chapter is empty if:</P> <P>(i) All wastes have been removed that can be removed using the practices commonly employed to remove materials from that type of container, e.g., pouring, pumping, and aspirating, <E T="03">and</E> <PRTPAGE P="60"/> </P> <P>(ii) No more than 2.5 centimeters (one inch) of residue remain on the bottom of the container or inner liner, <E T="03">or</E> </P> <P>(iii)(A) No more than 3 percent by weight of the total capacity of the container remains in the container or inner liner if the container is less than or equal to 119 gallons in size; or</P> <P>(B) No more than 0.3 percent by weight of the total capacity of the container remains in the container or inner liner if the container is greater than 119 gallons in size.</P> <P>(2) A container that has held a hazardous waste that is a compressed gas is empty when the pressure in the container approaches atmospheric.</P> <P>(3) A container or an inner liner removed from a container that has held an acute hazardous waste listed in §§ 261.31, 261.32, or 261.33(e) is empty if:</P> <P>(i) The container or inner liner has been triple rinsed using a solvent capable of removing the commercial chemical product or manufacturing chemical intermediate;</P> <P>(ii) The container or inner liner has been cleaned by another method that has been shown in the scientific literature, or by tests conducted by the generator, to achieve equivalent removal; or</P> <P>(iii) In the case of a container, the inner liner that prevented contact of the commercial chemical product or manufacturing chemical intermediate with the container, has been removed.</P> <CITA>[45 FR 78529, Nov. 25, 1980, as amended at 47 FR 36097, Aug. 18, 1982; 48 FR 14294, Apr. 1, 1983; 50 FR 1999, Jan. 14, 1985; 51 FR 40637, Nov. 7, 1986; 70 FR 10815, Mar. 4, 2005; 70 FR 53453, Sept. 8, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.8</SECTNO> <SUBJECT>PCB wastes regulated under Toxic Substance Control Act.</SUBJECT> <P>The disposal of PCB-containing dielectric fluid and electric equipment containing such fluid authorized for use and regulated under part 761 of this chapter and that are hazardous only because they fail the test for the Toxicity Characteristic (Hazardous Waste Codes D018 through D043 only) are exempt from regulation under parts 261 through 265, and parts 268, 270, and 124 of this chapter, and the notification requirements of section 3010 of RCRA.</P> <CITA>[55 FR 11862, Mar. 29, 1990]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.9</SECTNO> <SUBJECT>Requirements for Universal Waste.</SUBJECT> <P>The wastes listed in this section are exempt from regulation under parts 262 through 270 of this chapter except as specified in part 273 of this chapter and, therefore are not fully regulated as hazardous waste. The wastes listed in this section are subject to regulation under 40 CFR part 273:</P> <P>(a) Batteries as described in 40 CFR 273.2;</P> <P>(b) Pesticides as described in § 273.3 of this chapter;</P> <P>(c) Mercury-containing equipment as described in § 273.4 of this chapter; and</P> <P>(d) Lamps as described in § 273.5 of this chapter.</P> <CITA>[60 FR 25541, May 11, 1995, as amended at 64 FR 36487, July 6, 1999; 70 FR 45520, Aug. 5, 2005]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Criteria for Identifying the Characteristics of Hazardous Waste and for Listing Hazardous Waste</HD> <SECTION> <SECTNO>§ 261.10</SECTNO> <SUBJECT>Criteria for identifying the characteristics of hazardous waste.</SUBJECT> <P>(a) The Administrator shall identify and define a characteristic of hazardous waste in subpart C only upon determining that:</P> <P>(1) A solid waste that exhibits the characteristic may:</P> <P>(i) Cause, or significantly contribute to, an increase in mortality or an increase in serious irreversible, or incapacitating reversible, illness; or</P> <P>(ii) Pose a substantial present or potential hazard to human health or the environment when it is improperly treated, stored, transported, disposed of or otherwise managed; and</P> <P>(2) The characteristic can be:</P> <P>(i) Measured by an available standardized test method which is reasonably within the capability of generators of solid waste or private sector laboratories that are available to serve generators of solid waste; or</P> <P>(ii) Reasonably detected by generators of solid waste through their knowledge of their waste.</P> <P>(b) [Reserved]</P> </SECTION> <SECTION> <PRTPAGE P="61"/> <SECTNO>§ 261.11</SECTNO> <SUBJECT>Criteria for listing hazardous waste.</SUBJECT> <P>(a) The Administrator shall list a solid waste as a hazardous waste only upon determining that the solid waste meets one of the following criteria:</P> <P>(1) It exhibits any of the characteristics of hazardous waste identified in subpart C.</P> <P>(2) It has been found to be fatal to humans in low doses or, in the absence of data on human toxicity, it has been shown in studies to have an oral LD 50 toxicity (rat) of less than 50 milligrams per kilogram, an inhalation LC 50 toxicity (rat) of less than 2 milligrams per liter, or a dermal LD 50 toxicity (rabbit) of less than 200 milligrams per kilogram or is otherwise capable of causing or significantly contributing to an increase in serious irreversible, or incapacitating reversible, illness. (Waste listed in accordance with these criteria will be designated Acute Hazardous Waste.)</P> <P>(3) It contains any of the toxic constituents listed in appendix VIII and, after considering the following factors, the Administrator concludes that the waste is capable of posing a substantial present or potential hazard to human health or the environment when improperly treated, stored, transported or disposed of, or otherwise managed:</P> <P>(i) The nature of the toxicity presented by the constituent.</P> <P>(ii) The concentration of the constituent in the waste.</P> <P>(iii) The potential of the constituent or any toxic degradation product of the constituent to migrate from the waste into the environment under the types of improper management considered in paragraph (a)(3)(vii) of this section.</P> <P>(iv) The persistence of the constituent or any toxic degradation product of the constituent.</P> <P>(v) The potential for the constituent or any toxic degradation product of the constituent to degrade into non-harmful constituents and the rate of degradation.</P> <P>(vi) The degree to which the constituent or any degradation product of the constituent bioaccumulates in ecosystems.</P> <P>(vii) The plausible types of improper management to which the waste could be subjected.</P> <P>(viii) The quantities of the waste generated at individual generation sites or on a regional or national basis.</P> <P>(ix) The nature and severity of the human health and environmental damage that has occurred as a result of the improper management of wastes containing the constituent.</P> <P>(x) Action taken by other governmental agencies or regulatory programs based on the health or environmental hazard posed by the waste or waste constituent.</P> <P>(xi) Such other factors as may be appropriate.</P> <FP>Substances will be listed on appendix VIII only if they have been shown in scientific studies to have toxic, carcinogenic, mutagenic or teratogenic effects on humans or other life forms.</FP> <P>(Wastes listed in accordance with these criteria will be designated Toxic wastes.)</P> <P>(b) The Administrator may list classes or types of solid waste as hazardous waste if he has reason to believe that individual wastes, within the class or type of waste, typically or frequently are hazardous under the definition of hazardous waste found in section 1004(5) of the Act.</P> <P>(c) The Administrator will use the criteria for listing specified in this section to establish the exclusion limits referred to in § 261.5(c).</P> <CITA>[45 FR 33119, May 19, 1980, as amended at 55 FR 18726, May 4, 1990; 57 FR 14, Jan. 2, 1992]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Characteristics of Hazardous Waste</HD> <SECTION> <SECTNO>§ 261.20</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) A solid waste, as defined in § 261.2, which is not excluded from regulation as a hazardous waste under § 261.4(b), is a hazardous waste if it exhibits any of the characteristics identified in this subpart. </P> <EXTRACT> <FP>[<E T="03">Comment:</E> § 262.11 of this chapter sets forth the generator's responsibility to determine whether his waste exhibits one or more of the characteristics identified in this subpart]</FP> </EXTRACT> <P>(b) A hazardous waste which is identified by a characteristic in this subpart is assigned every EPA Hazardous Waste Number that is applicable as set forth in this subpart. This number <PRTPAGE P="62"/>must be used in complying with the notification requirements of section 3010 of the Act and all applicable recordkeeping and reporting requirements under parts 262 through 265, 268, and 270 of this chapter.</P> <P>(c) For purposes of this subpart, the Administrator will consider a sample obtained using any of the applicable sampling methods specified in appendix I to be a representative sample within the meaning of part 260 of this chapter. </P> <EXTRACT> <FP>[<E T="03">Comment:</E> Since the appendix I sampling methods are not being formally adopted by the Administrator, a person who desires to employ an alternative sampling method is not required to demonstrate the equivalency of his method under the procedures set forth in §§ 260.20 and 260.21.]</FP> </EXTRACT> <CITA>[45 FR 33119, May 19, 1980, as amended at 51 FR 40636, Nov. 7, 1986; 55 FR 22684, June 1, 1990; 56 FR 3876, Jan. 31, 1991]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.21</SECTNO> <SUBJECT>Characteristic of ignitability.</SUBJECT> <P>(a) A solid waste exhibits the characteristic of ignitability if a representative sample of the waste has any of the following properties:</P> <P>(1) It is a liquid, other than an aqueous solution containing less than 24 percent alcohol by volume and has flash point less than 60 °C (140 °F), as determined by a Pensky-Martens Closed Cup Tester, using the test method specified in ASTM Standard D 93-79 or D 93-80 (incorporated by reference, see § 260.11), or a Setaflash Closed Cup Tester, using the test method specified in ASTM Standard D 3278-78 (incorporated by reference, see § 260.11).</P> <P>(2) It is not a liquid and is capable, under standard temperature and pressure, of causing fire through friction, absorption of moisture or spontaneous chemical changes and, when ignited, burns so vigorously and persistently that it creates a hazard.</P> <P>(3) It is an ignitable compressed gas.</P> <P>(i) The term “compressed gas” shall designate any material or mixture having in the container an absolute pressure exceeding 40 p.s.i. at 70 °F or, regardless of the pressure at 70 °F, having an absolute pressure exceeding 104 p.s.i. at 130 °F; or any liquid flammable material having a vapor pressure exceeding 40 p.s.i. absolute at 100 °F as determined by ASTM Test D-323.</P> <P>(ii) A compressed gas shall be characterized as ignitable if any one of the following occurs:</P> <P>(A) Either a mixture of 13 percent or less (by volume) with air forms a flammable mixture or the flammable range with air is wider than 12 percent regardless of the lower limit. These limits shall be determined at atmospheric temperature and pressure. The method of sampling and test procedure shall be acceptable to the Bureau of Explosives and approved by the director, Pipeline and Hazardous Materials Technology, U.S. Department of Transportation (see Note 2).</P> <P>(B) Using the Bureau of Explosives' Flame Projection Apparatus (see Note 1), the flame projects more than 18 inches beyond the ignition source with valve opened fully, or, the flame flashes back and burns at the valve with any degree of valve opening.</P> <P>(C) Using the Bureau of Explosives' Open Drum Apparatus (see Note 1), there is any significant propagation of flame away from the ignition source.</P> <P>(D) Using the Bureau of Explosives' Closed Drum Apparatus (see Note 1), there is any explosion of the vapor-air mixture in the drum.</P> <P>(4) It is an oxidizer. An oxidizer for the purpose of this subchapter is a substance such as a chlorate, permanganate, inorganic peroxide, or a nitrate, that yields oxygen readily to stimulate the combustion of organic matter (see Note 4).</P> <P>(i) An organic compound containing the bivalent -O-O- structure and which may be considered a derivative of hydrogen peroxide where one or more of the hydrogen atoms have been replaced by organic radicals must be classed as an organic peroxide unless:</P> <P>(A) The material meets the definition of a Class A explosive or a Class B explosive, as defined in § 261.23(a)(8), in which case it must be classed as an explosive,</P> <P>(B) The material is forbidden to be offered for transportation according to 49 CFR 172.101 and 49 CFR 173.21,</P> <P>(C) It is determined that the predominant hazard of the material containing an organic peroxide is other than that of an organic peroxide, or<PRTPAGE P="63"/> </P> <P>(D) According to data on file with the Pipeline and Hazardous Materials Safety Administration in the U.S. Department of Transportation (see Note 3), it has been determined that the material does not present a hazard in transportation.</P> <P>(b) A solid waste that exhibits the characteristic of ignitability has the EPA Hazardous Waste Number of D001. </P> <NOTE> <HD SOURCE="HED">Note 1:</HD> <P>A description of the Bureau of Explosives' Flame Projection Apparatus, Open Drum Apparatus, Closed Drum Apparatus, and method of tests may be procured from the Bureau of Explosives.</P> </NOTE> <NOTE> <HD SOURCE="HED">Note 2:</HD> <P>As part of a U.S. Department of Transportation (DOT) reorganization, the Office of Hazardous Materials Technology (OHMT), which was the office listed in the 1980 publication of 49 CFR 173.300 for the purposes of approving sampling and test procedures for a flammable gas, ceased operations on February 20, 2005. OHMT programs have moved to the Pipeline and Hazardous Materials Safety Administration (PHMSA) in the DOT.</P> </NOTE> <NOTE> <HD SOURCE="HED">Note 3:</HD> <P>As part of a U.S. Department of Transportation (DOT) reorganization, the Research and Special Programs Administration (RSPA), which was the office listed in the 1980 publication of 49 CFR 173.151a for the purposes of determining that a material does not present a hazard in transport, ceased operations on February 20, 2005. RSPA programs have moved to the Pipeline and Hazardous Materials Safety Administration (PHMSA) in the DOT.</P> </NOTE> <NOTE> <HD SOURCE="HED">Note 4:</HD> <P>The DOT regulatory definition of an oxidizer was contained in § 173.151 of 49 CFR, and the definition of an organic peroxide was contained in paragraph 173.151a. An organic peroxide is a type of oxidizer.</P> </NOTE> <CITA>[45 FR 33119, May 19, 1980, as amended at 46 FR 35247, July 7, 1981; 55 FR 22684, June 1, 1990; 70 FR 34561, June 14, 2005; 71 FR 40259, July 14, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.22</SECTNO> <SUBJECT>Characteristic of corrosivity.</SUBJECT> <P>(a) A solid waste exhibits the characteristic of corrosivity if a representative sample of the waste has either of the following properties:</P> <P>(1) It is aqueous and has a pH less than or equal to 2 or greater than or equal to 12.5, as determined by a pH meter using Method 9040C in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, as incorporated by reference in § 260.11 of this chapter.</P> <P>(2) It is a liquid and corrodes steel (SAE 1020) at a rate greater than 6.35 mm (0.250 inch) per year at a test temperature of 55 °C (130 °F) as determined by Method 1110A in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, and as incorporated by reference in § 260.11 of this chapter.</P> <P>(b) A solid waste that exhibits the characteristic of corrosivity has the EPA Hazardous Waste Number of D002.</P> <CITA>[45 FR 33119, May 19, 1980, as amended at 46 FR 35247, July 7, 1981; 55 FR 22684, June 1, 1990; 58 FR 46049, Aug. 31, 1993; 70 FR 34561, June 14, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.23</SECTNO> <SUBJECT>Characteristic of reactivity.</SUBJECT> <P>(a) A solid waste exhibits the characteristic of reactivity if a representative sample of the waste has <E T="03">any</E> of the following properties:</P> <P>(1) It is normally unstable and readily undergoes violent change without detonating.</P> <P>(2) It reacts violently with water.</P> <P>(3) It forms potentially explosive mixtures with water.</P> <P>(4) When mixed with water, it generates toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment.</P> <P>(5) It is a cyanide or sulfide bearing waste which, when exposed to pH conditions between 2 and 12.5, can generate toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment.</P> <P>(6) It is capable of detonation or explosive reaction if it is subjected to a strong initiating source or if heated under confinement.</P> <P>(7) It is readily capable of detonation or explosive decomposition or reaction at standard temperature and pressure.</P> <P>(8) It is a forbidden explosive as defined in 49 CFR 173.51, or a Class A explosive as defined in 49 CFR 173.53 or a Class B explosive as defined in 49 CFR 173.88.</P> <P>(b) A solid waste that exhibits the characteristic of reactivity has the EPA Hazardous Waste Number of D003.</P> <CITA>[45 FR 33119, May 19, 1980, as amended at 55 FR 22684, June 1, 1990]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.24</SECTNO> <SUBJECT>Toxicity characteristic.</SUBJECT> <P>(a) A solid waste (except manufactured gas plant waste) exhibits the characteristic of toxicity if, using the <PRTPAGE P="64"/>Toxicity Characteristic Leaching Procedure, test Method 1311 in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, as incorporated by reference in § 260.11 of this chapter, the extract from a representative sample of the waste contains any of the contaminants listed in table 1 at the concentration equal to or greater than the respective value given in that table. Where the waste contains less than 0.5 percent filterable solids, the waste itself, after filtering using the methodology outlined in Method 1311, is considered to be the extract for the purpose of this section.</P> <P>(b) A solid waste that exhibits the characteristic of toxicity has the EPA Hazardous Waste Number specified in Table 1 which corresponds to the toxic contaminant causing it to be hazardous.</P> <GPOTABLE CDEF="xls24,r20,10,7" COLS="4" OPTS="L2"> <TDESC> <E T="04">Table</E> 1<E T="04">—Maximum Concentration of Contaminants for the Toxicity Characteristic</E> </TDESC> <BOXHD> <CHED H="1">EPA HW No. <SU>1</SU> </CHED> <CHED H="1">Contaminant</CHED> <CHED H="1">CAS No. <SU>2</SU> </CHED> <CHED H="1">Regulatory Level (mg/L)</CHED> </BOXHD> <ROW> <ENT I="01">D004</ENT> <ENT>Arsenic</ENT> <ENT>7440-38-2</ENT> <ENT>5.0</ENT> </ROW> <ROW> <ENT I="01">D005</ENT> <ENT>Barium</ENT> <ENT>7440-39-3</ENT> <ENT>100.0</ENT> </ROW> <ROW> <ENT I="01">D018</ENT> <ENT>Benzene</ENT> <ENT>71-43-2</ENT> <ENT>0.5</ENT> </ROW> <ROW> <ENT I="01">D006</ENT> <ENT>Cadmium</ENT> <ENT>7440-43-9</ENT> <ENT>1.0</ENT> </ROW> <ROW> <ENT I="01">D019</ENT> <ENT>Carbon tetrachloride</ENT> <ENT>56-23-5</ENT> <ENT>0.5</ENT> </ROW> <ROW> <ENT I="01">D020</ENT> <ENT>Chlordane</ENT> <ENT>57-74-9</ENT> <ENT>0.03</ENT> </ROW> <ROW> <ENT I="01">D021</ENT> <ENT>Chlorobenzene</ENT> <ENT>108-90-7</ENT> <ENT>100.0</ENT> </ROW> <ROW> <ENT I="01">D022</ENT> <ENT>Chloroform</ENT> <ENT>67-66-3</ENT> <ENT>6.0</ENT> </ROW> <ROW> <ENT I="01">D007</ENT> <ENT>Chromium</ENT> <ENT>7440-47-3</ENT> <ENT>5.0</ENT> </ROW> <ROW> <ENT I="01">D023</ENT> <ENT>o-Cresol</ENT> <ENT>95-48-7</ENT> <ENT> <SU>4</SU> 200.0</ENT> </ROW> <ROW> <ENT I="01">D024</ENT> <ENT>m-Cresol</ENT> <ENT>108-39-4</ENT> <ENT> <SU>4</SU> 200.0</ENT> </ROW> <ROW> <ENT I="01">D025</ENT> <ENT>p-Cresol</ENT> <ENT>106-44-5</ENT> <ENT> <SU>4</SU> 200.0</ENT> </ROW> <ROW> <ENT I="01">D026</ENT> <ENT>Cresol</ENT> <ENT/> <ENT> <SU>4</SU> 200.0</ENT> </ROW> <ROW> <ENT I="01">D016</ENT> <ENT>2,4-D</ENT> <ENT>94-75-7</ENT> <ENT>10.0</ENT> </ROW> <ROW> <ENT I="01">D027</ENT> <ENT>1,4-Dichlorobenzene</ENT> <ENT>106-46-7</ENT> <ENT>7.5</ENT> </ROW> <ROW> <ENT I="01">D028</ENT> <ENT>1,2-Dichloroethane</ENT> <ENT>107-06-2</ENT> <ENT>0.5</ENT> </ROW> <ROW> <ENT I="01">D029</ENT> <ENT>1,1-Dichloroethylene</ENT> <ENT>75-35-4</ENT> <ENT>0.7</ENT> </ROW> <ROW> <ENT I="01">D030</ENT> <ENT>2,4-Dinitrotoluene</ENT> <ENT>121-14-2</ENT> <ENT> <SU>3</SU> 0.13</ENT> </ROW> <ROW> <ENT I="01">D012</ENT> <ENT>Endrin</ENT> <ENT>72-20-8</ENT> <ENT>0.02</ENT> </ROW> <ROW> <ENT I="01">D031</ENT> <ENT>Heptachlor (and its epoxide)</ENT> <ENT>76-44-8</ENT> <ENT>0.008</ENT> </ROW> <ROW> <ENT I="01">D032</ENT> <ENT>Hexachlorobenzene</ENT> <ENT>118-74-1</ENT> <ENT> <SU>3</SU> 0.13</ENT> </ROW> <ROW> <ENT I="01">D033</ENT> <ENT>Hexachlorobutadiene</ENT> <ENT>87-68-3</ENT> <ENT>0.5</ENT> </ROW> <ROW> <ENT I="01">D034</ENT> <ENT>Hexachloroethane</ENT> <ENT>67-72-1</ENT> <ENT>3.0</ENT> </ROW> <ROW> <ENT I="01">D008</ENT> <ENT>Lead</ENT> <ENT>7439-92-1</ENT> <ENT>5.0</ENT> </ROW> <ROW> <ENT I="01">D013</ENT> <ENT>Lindane</ENT> <ENT>58-89-9</ENT> <ENT>0.4</ENT> </ROW> <ROW> <ENT I="01">D009</ENT> <ENT>Mercury</ENT> <ENT>7439-97-6</ENT> <ENT>0.2</ENT> </ROW> <ROW> <ENT I="01">D014</ENT> <ENT>Methoxychlor</ENT> <ENT>72-43-5</ENT> <ENT>10.0</ENT> </ROW> <ROW> <ENT I="01">D035</ENT> <ENT>Methyl ethyl ketone</ENT> <ENT>78-93-3</ENT> <ENT>200.0</ENT> </ROW> <ROW> <ENT I="01">D036</ENT> <ENT>Nitrobenzene</ENT> <ENT>98-95-3</ENT> <ENT>2.0</ENT> </ROW> <ROW> <ENT I="01">D037</ENT> <ENT>Pentrachlorophenol</ENT> <ENT>87-86-5</ENT> <ENT>100.0</ENT> </ROW> <ROW> <ENT I="01">D038</ENT> <ENT>Pyridine</ENT> <ENT>110-86-1</ENT> <ENT> <SU>3</SU> 5.0</ENT> </ROW> <ROW> <ENT I="01">D010</ENT> <ENT>Selenium</ENT> <ENT>7782-49-2</ENT> <ENT>1.0</ENT> </ROW> <ROW> <ENT I="01">D011</ENT> <ENT>Silver</ENT> <ENT>7440-22-4</ENT> <ENT>5.0</ENT> </ROW> <ROW> <ENT I="01">D039</ENT> <ENT>Tetrachloroethyl-ene</ENT> <ENT>127-18-4</ENT> <ENT>0.7</ENT> </ROW> <ROW> <ENT I="01">D015</ENT> <ENT>Toxaphene</ENT> <ENT>8001-35-2</ENT> <ENT>0.5</ENT> </ROW> <ROW> <ENT I="01">D040</ENT> <ENT>Trichloroethyl-ene</ENT> <ENT>79-01-6</ENT> <ENT>0.5</ENT> </ROW> <ROW> <ENT I="01">D041</ENT> <ENT>2,4,5-Trichlorophenol</ENT> <ENT>95-95-4</ENT> <ENT>400.0</ENT> </ROW> <ROW> <ENT I="01">D042</ENT> <ENT>2,4,6-Trichlorophenol</ENT> <ENT>88-06-2</ENT> <ENT>2.0</ENT> </ROW> <ROW> <ENT I="01">D017</ENT> <ENT>2,4,5-TP (Silvex)</ENT> <ENT>93-72-1</ENT> <ENT>1.0</ENT> </ROW> <ROW> <ENT I="01">D043</ENT> <ENT>Vinyl chloride</ENT> <ENT>75-01-4</ENT> <ENT>0.2</ENT> </ROW> <TNOTE> <SU>1</SU> Hazardous waste number.</TNOTE> <TNOTE> <SU>2</SU> Chemical abstracts service number.</TNOTE> <TNOTE> <SU>3</SU> Quantitation limit is greater than the calculated regulatory level. The quantitation limit therefore becomes the regulatory level.</TNOTE> <TNOTE> <SU>4</SU> If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/l.</TNOTE> </GPOTABLE> <CITA>[55 FR 11862, Mar. 29, 1990, as amended at 55 FR 22684, June 1, 1990; 55 FR 26987, June 29, 1990; 58 FR 46049, Aug. 31, 1993; 67 FR 11254, Mar. 13, 2002; 71 FR 40259, July 14, 2006]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Lists of Hazardous Wastes</HD> <SECTION> <SECTNO>§ 261.30</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) A solid waste is a hazardous waste if it is listed in this subpart, unless it has been excluded from this list under §§ 260.20 and 260.22.</P> <P>(b) The Administrator will indicate his basis for listing the classes or types of wastes listed in this subpart by employing one or more of the following Hazard Codes:</P> <GPOTABLE CDEF="s25,xs20" COLS="2" OPTS="L0,8/9,g1,t1,i1"> <ROW> <ENT I="01">Ignitable Waste</ENT> <ENT>(I)</ENT> </ROW> <ROW> <ENT I="01">Corrosive Waste</ENT> <ENT>(C)</ENT> </ROW> <ROW> <ENT I="01">Reactive Waste</ENT> <ENT>(R)</ENT> </ROW> <ROW> <ENT I="01">Toxicity Characteristic Waste</ENT> <ENT>(E)</ENT> </ROW> <ROW> <ENT I="01">Acute Hazardous Waste</ENT> <ENT>(H)</ENT> </ROW> <ROW> <ENT I="01">Toxic Waste</ENT> <ENT>(T)</ENT> </ROW> </GPOTABLE> <FP>Appendix VII identifies the constituent which caused the Administrator to list the waste as a Toxicity Characteristic Waste (E) or Toxic Waste (T) in §§ 261.31 and 261.32.</FP> <P>(c) Each hazardous waste listed in this subpart is assigned an EPA Hazardous Waste Number which precedes the name of the waste. This number must be used in complying with the notification requirements of Section 3010 of the Act and certain recordkeeping and reporting requirements under parts 262 through 265, 268, and part 270 of this chapter.</P> <P>(d) The following hazardous wastes listed in § 261.31 or § 261.32 are subject to the exclusion limits for acutely hazardous wastes established in § 261.5: <PRTPAGE P="65"/>EPA Hazardous Wastes Nos. FO20, FO21, FO22, FO23, FO26, and FO27.</P> <CITA>[45 FR 33119, May 19, 1980, as amended at 48 FR 14294, Apr. 1, 1983; 50 FR 2000, Jan. 14, 1985; 51 FR 40636, Nov. 7, 1986; 55 FR 11863, Mar. 29, 1990]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.31</SECTNO> <SUBJECT>Hazardous wastes from non-specific sources.</SUBJECT> <EXT-XREF HREF="20080604" REFID="3">Link to an amendment published at 73 FR 31768, June 4, 2008.</EXT-XREF> <P>(a) The following solid wastes are listed hazardous wastes from non-specific sources unless they are excluded under §§ 260.20 and 260.22 and listed in appendix IX.</P> <GPOTABLE CDEF="xs78,r100,xs24" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">Industry and EPA hazardous waste No.</CHED> <CHED H="1">Hazardous waste</CHED> <CHED H="1">Hazard code</CHED> </BOXHD> <ROW> <ENT I="11">Generic:</ENT> </ROW> <ROW> <ENT I="02">F001</ENT> <ENT>The following spent halogenated solvents used in degreasing: Tetrachloroethylene, trichloroethylene, methylene chloride, 1,1,1-trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures/blends used in degreasing containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those solvents listed in F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F002</ENT> <ENT>The following spent halogenated solvents: Tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2,2-trifluoroethane, ortho-dichlorobenzene, trichlorofluoromethane, and 1,1,2-trichloroethane; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those listed in F001, F004, or F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F003</ENT> <ENT>The following spent non-halogenated solvents: Xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures/blends containing, before use, only the above spent non-halogenated solvents; and all spent solvent mixtures/blends containing, before use, one or more of the above non-halogenated solvents, and, a total of ten percent or more (by volume) of one or more of those solvents listed in F001, F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures</ENT> <ENT>(I)*</ENT> </ROW> <ROW> <ENT I="02">F004</ENT> <ENT>The following spent non-halogenated solvents: Cresols and cresylic acid, and nitrobenzene; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F005</ENT> <ENT>The following spent non-halogenated solvents: Toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane; all spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, or F004; and still bottoms from the recovery of these spent solvents and spent solvent mixtures</ENT> <ENT>(I,T)</ENT> </ROW> <ROW> <ENT I="02">F006</ENT> <ENT>Wastewater treatment sludges from electroplating operations except from the following processes: (1) Sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning/stripping associated with tin, zinc and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F007</ENT> <ENT>Spent cyanide plating bath solutions from electroplating operations</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">F008</ENT> <ENT>Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are used in the process</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">F009</ENT> <ENT>Spent stripping and cleaning bath solutions from electroplating operations where cyanides are used in the process</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">F010</ENT> <ENT>Quenching bath residues from oil baths from metal heat treating operations where cyanides are used in the process</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">F011</ENT> <ENT>Spent cyanide solutions from salt bath pot cleaning from metal heat treating operations</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">F012</ENT> <ENT>Quenching waste water treatment sludges from metal heat treating operations where cyanides are used in the process</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F019</ENT> <ENT>Wastewater treatment sludges from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F020</ENT> <ENT>Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tri- or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives. (This listing does not include wastes from the production of Hexachlorophene from highly purified 2,4,5-trichlorophenol.)</ENT> <ENT>(H)</ENT> </ROW> <ROW> <ENT I="02">F021</ENT> <ENT>Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of pentachlorophenol, or of intermediates used to produce its derivatives</ENT> <ENT>(H)</ENT> </ROW> <ROW> <PRTPAGE P="66"/> <ENT I="02">F022</ENT> <ENT>Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetra-, penta-, or hexachlorobenzenes under alkaline conditions</ENT> <ENT>(H)</ENT> </ROW> <ROW> <ENT I="02">F023</ENT> <ENT>Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tri- and tetrachlorophenols. (This listing does not include wastes from equipment used only for the production or use of Hexachlorophene from highly purified 2,4,5-trichlorophenol.)</ENT> <ENT>(H)</ENT> </ROW> <ROW> <ENT I="02">F024</ENT> <ENT>Process wastes, including but not limited to, distillation residues, heavy ends, tars, and reactor clean-out wastes, from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. (This listing does not include wastewaters, wastewater treatment sludges, spent catalysts, and wastes listed in § 261.31 or § 261.32.)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F025</ENT> <ENT>Condensed light ends, spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F026</ENT> <ENT>Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetra-, penta-, or hexachlorobenzene under alkaline conditions</ENT> <ENT>(H)</ENT> </ROW> <ROW> <ENT I="02">F027</ENT> <ENT>Discarded unused formulations containing tri-, tetra-, or pentachlorophenol or discarded unused formulations containing compounds derived from these chlorophenols. (This listing does not include formulations containing Hexachlorophene sythesized from prepurified 2,4,5-trichlorophenol as the sole component.)</ENT> <ENT>(H)</ENT> </ROW> <ROW> <ENT I="02">F028</ENT> <ENT>Residues resulting from the incineration or thermal treatment of soil contaminated with EPA Hazardous Waste Nos. F020, F021, F022, F023, F026, and F027</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F032</ENT> <ENT>Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations (except potentially cross-contaminated wastes that have had the F032 waste code deleted in accordance with § 261.35 of this chapter or potentially cross-contaminated wastes that are otherwise currently regulated as hazardous wastes (i.e., F034 or F035), and where the generator does not resume or initiate use of chlorophenolic formulations). This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F034</ENT> <ENT>Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use creosote formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F035</ENT> <ENT>Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F037</ENT> <ENT>Petroleum refinery primary oil/water/solids separation sludge—Any sludge generated from the gravitational separation of oil/water/solids during the storage or treatment of process wastewaters and oil cooling wastewaters from petroleum refineries. Such sludges include, but are not limited to, those generated in oil/water/solids separators; tanks and impoundments; ditches and other conveyances; sumps; and stormwater units receiving dry weather flow. Sludge generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges generated in aggressive biological treatment units as defined in § 261.31(b)(2) (including sludges generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and K051 wastes are not included in this listing. This listing does include residuals generated from processing or recycling oil-bearing hazardous secondary materials excluded under § 261.4(a)(12)(i), if those residuals are to be disposed of.</ENT> <ENT>(T)</ENT> </ROW> <ROW> <PRTPAGE P="67"/> <ENT I="02">F038</ENT> <ENT>Petroleum refinery secondary (emulsified) oil/water/solids separation sludge—Any sludge and/or float generated from the physical and/or chemical separation of oil/water/solids in process wastewaters and oily cooling wastewaters from petroleum refineries. Such wastes include, but are not limited to, all sludges and floats generated in: induced air flotation (IAF) units, tanks and impoundments, and all sludges generated in DAF units. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges and floats generated in aggressive biological treatment units as defined in § 261.31(b)(2) (including sludges and floats generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and F037, K048, and K051 wastes are not included in this listing</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">F039</ENT> <ENT>Leachate (liquids that have percolated through land disposed wastes) resulting from the disposal of more than one restricted waste classified as hazardous under subpart D of this part. (Leachate resulting from the disposal of one or more of the following EPA Hazardous Wastes and no other Hazardous Wastes retains its EPA Hazardous Waste Number(s): F020, F021, F022, F026, F027, and/or F028.)</ENT> <ENT>(T)</ENT> </ROW> <TNOTE>*(I,T) should be used to specify mixtures that are ignitable and contain toxic constituents.</TNOTE> </GPOTABLE> <P>(b) Listing Specific Definitions: (1) For the purposes of the F037 and F038 listings, oil/water/solids is defined as oil and/or water and/or solids.(2) (i) For the purposes of the F037 and F038 listings, aggressive biological treatment units are defined as units which employ one of the following four treatment methods: activated sludge; trickling filter; rotating biological contactor for the continuous accelerated biological oxidation of wastewaters; or high-rate aeration. High-rate aeration is a system of surface impoundments or tanks, in which intense mechanical aeration is used to completely mix the wastes, enhance biological activity, and (A) the units employ a minimum of 6 hp per million gallons of treatment volume; and either (B) the hydraulic retention time of the unit is no longer than 5 days; or (C) the hydraulic retention time is no longer than 30 days and the unit does not generate a sludge that is a hazardous waste by the Toxicity Characteristic.</P> <P>(ii) Generators and treatment, storage and disposal facilities have the burden of proving that their sludges are exempt from listing as F037 and F038 wastes under this definition. Generators and treatment, storage and disposal facilities must maintain, in their operating or other onsite records, documents and data sufficient to prove that: (A) the unit is an aggressive biological treatment unit as defined in this subsection; and (B) the sludges sought to be exempted from the definitions of F037 and/or F038 were actually generated in the aggressive biological treatment unit.</P> <P>(3) (i) For the purposes of the F037 listing, sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement.</P> <P>(ii) For the purposes of the F038 listing, (A) sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement and (B) floats are considered to be generated at the moment they are formed in the top of the unit.</P> <CITA>[46 FR 4617, Jan. 16, 1981]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 261.31, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> <EFFDNOTP> <HD SOURCE="HED">Effective Date Note:</HD> <P>At 73 FR 31768, June 4, 2008, § 261.31 was amended by revising the entry for F019, in the table, in paragraph (a) and by adding paragraph (b)(4), effective July 7, 2008. For the convenience of the user, the added and revised text is set forth as follows:</P> <REVTXT> <SECTION> <SECTNO>§ 261.31</SECTNO> <SUBJECT>Hazardous wastes from non-specific sources.</SUBJECT> <P>(a) * * *<PRTPAGE P="68"/> </P> <GPOTABLE CDEF="xs80,r100,xs30" COLS="3" OPTS="L1"> <BOXHD> <CHED H="1">Industry and EPA hazardous waste No.</CHED> <CHED H="1">Hazardous waste</CHED> <CHED H="1">Hazard code</CHED> </BOXHD> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="28">*******</ENT> </ROW> <ROW> <ENT I="01">F019</ENT> <ENT>Wastewater treatment sludges from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process. Wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process will not be subject to this listing at the point of generation if the wastes are not placed outside on the land prior to shipment to a landfill for disposal and are either: disposed in a Subtitle D municipal or industrial landfill unit that is equipped with a single clay liner and is permitted, licensed or otherwise authorized by the state; or disposed in a landfill unit subject to, or otherwise meeting, the landfill requirements in § 258.40, § 264.301 or § 265.301. For the purposes of this listing, motor vehicle manufacturing is defined in paragraph (b)(4)(i) of this section and (b)(4)(ii) of this section describes the recordkeeping requirements for motor vehicle manufacturing facilities</ENT> <ENT>(T)</ENT> </ROW> </GPOTABLE> <STARS/> <P>(b) * * *</P> <P>(4) For the purposes of the F019 listing, the following apply to wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process.</P> <P>(i) Motor vehicle manufacturing is defined to include the manufacture of automobiles and light trucks/utility vehicles (including light duty vans, pick-up trucks, minivans, and sport utility vehicles). Facilities must be engaged in manufacturing complete vehicles (body and chassis or unibody) or chassis only.</P> <P>(ii) Generators must maintain in their on-site records documentation and information sufficient to prove that the wastewater treatment sludges to be exempted from the F019 listing meet the conditions of the listing. These records must include: the volume of waste generated and disposed of off site; documentation showing when the waste volumes were generated and sent off site; the name and address of the receiving facility; and documentation confirming receipt of the waste by the receiving facility. Generators must maintain these documents on site for no less than three years. The retention period for the documentation is automatically extended during the course of any enforcement action or as requested by the Regional Administrator or the state regulatory authority.</P> </SECTION> </REVTXT> </EFFDNOTP> </SECTION> <SECTION> <SECTNO>§ 261.32</SECTNO> <SUBJECT>Hazardous wastes from specific sources.</SUBJECT> <P>(a)The following solid wastes are listed hazardous wastes from specific sources unless they are excluded under §§ 260.20 and 260.22 and listed in appendix IX.</P> <GPOTABLE CDEF="xs78,r100,xs24" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">Industry and EPA hazardous waste No.</CHED> <CHED H="1">Hazardous waste</CHED> <CHED H="1">Hazard code</CHED> </BOXHD> <ROW> <ENT I="01">Wood preservation: K001</ENT> <ENT>Bottom sediment sludge from the treatment of wastewaters from wood preserving processes that use creosote and/or pentachlorophenol</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Inorganic pigments:</ENT> </ROW> <ROW> <ENT I="02">K002</ENT> <ENT>Wastewater treatment sludge from the production of chrome yellow and orange pigments</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K003</ENT> <ENT>Wastewater treatment sludge from the production of molybdate orange pigments</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K004</ENT> <ENT>Wastewater treatment sludge from the production of zinc yellow pigments</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K005</ENT> <ENT>Wastewater treatment sludge from the production of chrome green pigments</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K006</ENT> <ENT>Wastewater treatment sludge from the production of chrome oxide green pigments (anhydrous and hydrated)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K007</ENT> <ENT>Wastewater treatment sludge from the production of iron blue pigments</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K008</ENT> <ENT>Oven residue from the production of chrome oxide green pigments</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Organic chemicals:</ENT> </ROW> <ROW> <ENT I="02">K009</ENT> <ENT>Distillation bottoms from the production of acetaldehyde from ethylene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K010</ENT> <ENT>Distillation side cuts from the production of acetaldehyde from ethylene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K011</ENT> <ENT>Bottom stream from the wastewater stripper in the production of acrylonitrile</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">K013</ENT> <ENT>Bottom stream from the acetonitrile column in the production of acrylonitrile</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">K014</ENT> <ENT>Bottoms from the acetonitrile purification column in the production of acrylonitrile</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K015</ENT> <ENT>Still bottoms from the distillation of benzyl chloride</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K016</ENT> <ENT>Heavy ends or distillation residues from the production of carbon tetrachloride</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K017</ENT> <ENT>Heavy ends (still bottoms) from the purification column in the production of epichlorohydrin</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K018</ENT> <ENT>Heavy ends from the fractionation column in ethyl chloride production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K019</ENT> <ENT>Heavy ends from the distillation of ethylene dichloride in ethylene dichloride production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <PRTPAGE P="69"/> <ENT I="02">K020</ENT> <ENT>Heavy ends from the distillation of vinyl chloride in vinyl chloride monomer production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K021</ENT> <ENT>Aqueous spent antimony catalyst waste from fluoromethanes production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K022</ENT> <ENT>Distillation bottom tars from the production of phenol/acetone from cumene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K023</ENT> <ENT>Distillation light ends from the production of phthalic anhydride from naphthalene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K024</ENT> <ENT>Distillation bottoms from the production of phthalic anhydride from naphthalene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K025</ENT> <ENT>Distillation bottoms from the production of nitrobenzene by the nitration of benzene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K026</ENT> <ENT>Stripping still tails from the production of methy ethyl pyridines</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K027</ENT> <ENT>Centrifuge and distillation residues from toluene diisocyanate production</ENT> <ENT>(R, T)</ENT> </ROW> <ROW> <ENT I="02">K028</ENT> <ENT>Spent catalyst from the hydrochlorinator reactor in the production of 1,1,1-trichloroethane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K029</ENT> <ENT>Waste from the product steam stripper in the production of 1,1,1-trichloroethane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K030</ENT> <ENT>Column bottoms or heavy ends from the combined production of trichloroethylene and perchloroethylene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K083</ENT> <ENT>Distillation bottoms from aniline production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K085</ENT> <ENT>Distillation or fractionation column bottoms from the production of chlorobenzenes</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K093</ENT> <ENT>Distillation light ends from the production of phthalic anhydride from ortho-xylene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K094</ENT> <ENT>Distillation bottoms from the production of phthalic anhydride from ortho-xylene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K095</ENT> <ENT>Distillation bottoms from the production of 1,1,1-trichloroethane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K096</ENT> <ENT>Heavy ends from the heavy ends column from the production of 1,1,1-trichloroethane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K103</ENT> <ENT>Process residues from aniline extraction from the production of aniline</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K104</ENT> <ENT>Combined wastewater streams generated from nitrobenzene/aniline production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K105</ENT> <ENT>Separated aqueous stream from the reactor product washing step in the production of chlorobenzenes</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K107</ENT> <ENT>Column bottoms from product separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazines</ENT> <ENT>(C,T)</ENT> </ROW> <ROW> <ENT I="02">K108</ENT> <ENT>Condensed column overheads from product separation and condensed reactor vent gases from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides</ENT> <ENT>(I,T)</ENT> </ROW> <ROW> <ENT I="02">K109</ENT> <ENT>Spent filter cartridges from product purification from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K110</ENT> <ENT>Condensed column overheads from intermediate separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K111</ENT> <ENT>Product washwaters from the production of dinitrotoluene via nitration of toluene</ENT> <ENT>(C,T)</ENT> </ROW> <ROW> <ENT I="02">K112</ENT> <ENT>Reaction by-product water from the drying column in the production of toluenediamine via hydrogenation of dinitrotoluene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K113</ENT> <ENT>Condensed liquid light ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K114</ENT> <ENT>Vicinals from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K115</ENT> <ENT>Heavy ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K116</ENT> <ENT>Organic condensate from the solvent recovery column in the production of toluene diisocyanate via phosgenation of toluenediamine</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K117</ENT> <ENT>Wastewater from the reactor vent gas scrubber in the production of ethylene dibromide via bromination of ethene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K118</ENT> <ENT>Spent adsorbent solids from purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K136</ENT> <ENT>Still bottoms from the purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K149</ENT> <ENT>Distillation bottoms from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups, (This waste does not include still bottoms from the distillation of benzyl chloride.)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K150</ENT> <ENT>Organic residuals, excluding spent carbon adsorbent, from the spent chlorine gas and hydrochloric acid recovery processes associated with the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K151</ENT> <ENT>Wastewater treatment sludges, excluding neutralization and biological sludges, generated during the treatment of wastewaters from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K156</ENT> <ENT>Organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K157</ENT> <ENT>Wastewaters (including scrubber waters, condenser waters, washwaters, and separation waters) from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K158</ENT> <ENT>Bag house dusts and filter/separation solids from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K159</ENT> <ENT>Organics from the treatment of thiocarbamate wastes</ENT> <ENT>(T)</ENT> </ROW> <ROW> <PRTPAGE P="70"/> <ENT I="02">K161</ENT> <ENT>Purification solids (including filtration, evaporation, and centrifugation solids), bag house dust and floor sweepings from the production of dithiocarbamate acids and their salts. (This listing does not include K125 or K126.)</ENT> <ENT>(R,T)</ENT> </ROW> <ROW> <ENT I="02">K174</ENT> <ENT>Wastewater treatment sludges from the production of ethylene dichloride or vinyl chloride monomer (including sludges that result from commingled ethylene dichloride or vinyl chloride monomer wastewater and other wastewater), unless the sludges meet the following conditions: (i) they are disposed of in a subtitle C or non-hazardous landfill licensed or permitted by the state or federal government; (ii) they are not otherwise placed on the land prior to final disposal; and (iii) the generator maintains documentation demonstrating that the waste was either disposed of in an on-site landfill or consigned to a transporter or disposal facility that provided a written commitment to dispose of the waste in an off-site landfill. Respondents in any action brought to enforce the requirements of subtitle C must, upon a showing by the government that the respondent managed wastewater treatment sludges from the production of vinyl chloride monomer or ethylene dichloride, demonstrate that they meet the terms of the exclusion set forth above. In doing so, they must provide appropriate documentation (e.g., contracts between the generator and the landfill owner/operator, invoices documenting delivery of waste to landfill, etc.) that the terms of the exclusion were met</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K175</ENT> <ENT>Wastewater treatment sludges from the production of vinyl chloride monomer using mercuric chloride catalyst in an acetylene-based process</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K181</ENT> <ENT>Nonwastewaters from the production of dyes and/or pigments (including nonwastewaters commingled at the point of generation with nonwastewaters from other processes) that, at the point of generation, contain mass loadings of any of the constituents identified in paragraph (c) of this section that are equal to or greater than the corresponding paragraph (c) levels, as determined on a calendar year basis. These wastes will not be hazardous if the nonwastewaters are: (i) disposed in a Subtitle D landfill unit subject to the design criteria in § 258.40, (ii) disposed in a Subtitle C landfill unit subject to either § 264.301 or § 265.301, (iii) disposed in other Subtitle D landfill units that meet the design criteria in § 258.40, § 264.301, or § 265.301, or (iv) treated in a combustion unit that is permitted under Subtitle C, or an onsite combustion unit that is permitted under the Clean Air Act. For the purposes of this listing, dyes and/or pigments production is defined in paragraph (b)(1) of this section. Paragraph (d) of this section describes the process for demonstrating that a facility's nonwastewaters are not K181. This listing does not apply to wastes that are otherwise identified as hazardous under §§ 261.21-261.24 and 261.31-261.33 at the point of generation. Also, the listing does not apply to wastes generated before any annual mass loading limit is met</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Inorganic chemicals:</ENT> </ROW> <ROW> <ENT I="02">K071</ENT> <ENT>Brine purification muds from the mercury cell process in chlorine production, where separately prepurified brine is not used</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K073</ENT> <ENT>Chlorinated hydrocarbon waste from the purification step of the diaphragm cell process using graphite anodes in chlorine production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K106</ENT> <ENT>Wastewater treatment sludge from the mercury cell process in chlorine production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K176</ENT> <ENT>Baghouse filters from the production of antimony oxide, including filters from the production of intermediates (e.g., antimony metal or crude antimony oxide)</ENT> <ENT>(E)</ENT> </ROW> <ROW> <ENT I="02">K177</ENT> <ENT>Slag from the production of antimony oxide that is speculatively accumulated or disposed, including slag from the production of intermediates (e.g., antimony metal or crude antimony oxide)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K178</ENT> <ENT>Residues from manufacturing and manufacturing-site storage of ferric chloride from acids formed during the production of titanium dioxide using the chloride-ilmenite process</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Pesticides:</ENT> </ROW> <ROW> <ENT I="02">K031</ENT> <ENT>By-product salts generated in the production of MSMA and cacodylic acid</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K032</ENT> <ENT>Wastewater treatment sludge from the production of chlordane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K033</ENT> <ENT>Wastewater and scrub water from the chlorination of cyclopentadiene in the production of chlordane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K034</ENT> <ENT>Filter solids from the filtration of hexachlorocyclopentadiene in the production of chlordane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K035</ENT> <ENT>Wastewater treatment sludges generated in the production of creosote</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K036</ENT> <ENT>Still bottoms from toluene reclamation distillation in the production of disulfoton</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K037</ENT> <ENT>Wastewater treatment sludges from the production of disulfoton</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K038</ENT> <ENT>Wastewater from the washing and stripping of phorate production</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K039</ENT> <ENT>Filter cake from the filtration of diethylphosphorodithioic acid in the production of phorate</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K040</ENT> <ENT>Wastewater treatment sludge from the production of phorate</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K041</ENT> <ENT>Wastewater treatment sludge from the production of toxaphene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K042</ENT> <ENT>Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the production of 2,4,5-T</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K043</ENT> <ENT>2,6-Dichlorophenol waste from the production of 2,4-D</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K097</ENT> <ENT>Vacuum stripper discharge from the chlordane chlorinator in the production of chlordane</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K098</ENT> <ENT>Untreated process wastewater from the production of toxaphene</ENT> <ENT>(T)</ENT> </ROW> <ROW> <PRTPAGE P="71"/> <ENT I="02">K099</ENT> <ENT>Untreated wastewater from the production of 2,4-D</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K123</ENT> <ENT>Process wastewater (including supernates, filtrates, and washwaters) from the production of ethylenebisdithiocarbamic acid and its salt</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K124</ENT> <ENT>Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid and its salts</ENT> <ENT>(C, T)</ENT> </ROW> <ROW> <ENT I="02">K125</ENT> <ENT>Filtration, evaporation, and centrifugation solids from the production of ethylenebisdithiocarbamic acid and its salts</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K126</ENT> <ENT>Baghouse dust and floor sweepings in milling and packaging operations from the production or formulation of ethylenebisdithiocarbamic acid and its salts</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K131</ENT> <ENT>Wastewater from the reactor and spent sulfuric acid from the acid dryer from the production of methyl bromide</ENT> <ENT>(C, T)</ENT> </ROW> <ROW> <ENT I="02">K132</ENT> <ENT>Spent absorbent and wastewater separator solids from the production of methyl bromide</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Explosives:</ENT> </ROW> <ROW> <ENT I="02">K044</ENT> <ENT>Wastewater treatment sludges from the manufacturing and processing of explosives</ENT> <ENT>(R)</ENT> </ROW> <ROW> <ENT I="02">K045</ENT> <ENT>Spent carbon from the treatment of wastewater containing explosives</ENT> <ENT>(R)</ENT> </ROW> <ROW> <ENT I="02">K046</ENT> <ENT>Wastewater treatment sludges from the manufacturing, formulation and loading of lead-based initiating compounds</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K047</ENT> <ENT>Pink/red water from TNT operations</ENT> <ENT>(R)</ENT> </ROW> <ROW> <ENT I="11">Petroleum refining:</ENT> </ROW> <ROW> <ENT I="02">K048</ENT> <ENT>Dissolved air flotation (DAF) float from the petroleum refining industry</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K049</ENT> <ENT>Slop oil emulsion solids from the petroleum refining industry</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K050</ENT> <ENT>Heat exchanger bundle cleaning sludge from the petroleum refining industry</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K051</ENT> <ENT>API separator sludge from the petroleum refining industry</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K052</ENT> <ENT>Tank bottoms (leaded) from the petroleum refining industry</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K169</ENT> <ENT>Crude oil storage tank sediment from petroleum refining operations</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K170</ENT> <ENT>Clarified slurry oil tank sediment and/or in-line filter/separation solids from petroleum refining operations</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K171</ENT> <ENT>Spent Hydrotreating catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media)</ENT> <ENT>(I,T)</ENT> </ROW> <ROW> <ENT I="02">K172</ENT> <ENT>Spent Hydrorefining catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media)</ENT> <ENT>(I,T)</ENT> </ROW> <ROW> <ENT I="11">Iron and steel:</ENT> </ROW> <ROW> <ENT I="02">K061</ENT> <ENT>Emission control dust/sludge from the primary production of steel in electric furnaces</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K062</ENT> <ENT>Spent pickle liquor generated by steel finishing operations of facilities within the iron and steel industry (SIC Codes 331 and 332)</ENT> <ENT>(C,T)</ENT> </ROW> <ROW> <ENT I="11">Primary copper:</ENT> </ROW> <ROW> <ENT I="11">Primary lead:</ENT> </ROW> <ROW> <ENT I="11">Primary zinc:</ENT> </ROW> <ROW> <ENT I="11">Primary aluminum:</ENT> </ROW> <ROW> <ENT I="02">K088</ENT> <ENT>Spent potliners from primary aluminum reduction</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Ferroalloys:</ENT> </ROW> <ROW> <ENT I="11">Secondary lead:</ENT> </ROW> <ROW> <ENT I="02">K069</ENT> <ENT>Emission control dust/sludge from secondary lead smelting. (<E T="04">Note:</E> This listing is stayed administratively for sludge generated from secondary acid scrubber systems. The stay will remain in effect until further administrative action is taken. If EPA takes further action effecting this stay, EPA will publish a notice of the action in the <E T="02">Federal Register</E>)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K100</ENT> <ENT>Waste leaching solution from acid leaching of emission control dust/sludge from secondary lead smelting</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Veterinary pharmaceuticals:</ENT> </ROW> <ROW> <ENT I="02">K084</ENT> <ENT>Wastewater treatment sludges generated during the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K101</ENT> <ENT>Distillation tar residues from the distillation of aniline-based compounds in the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K102</ENT> <ENT>Residue from the use of activated carbon for decolorization in the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Ink formulation:</ENT> </ROW> <ROW> <ENT I="02">K086</ENT> <ENT>Solvent washes and sludges, caustic washes and sludges, or water washes and sludges from cleaning tubs and equipment used in the formulation of ink from pigments, driers, soaps, and stabilizers containing chromium and lead</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="11">Coking:</ENT> </ROW> <ROW> <ENT I="02">K060</ENT> <ENT>Ammonia still lime sludge from coking operations</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K087</ENT> <ENT>Decanter tank tar sludge from coking operations</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K141</ENT> <ENT>Process residues from the recovery of coal tar, including, but not limited to, collecting sump residues from the production of coke from coal or the recovery of coke by-products produced from coal. This listing does not include K087 (decanter tank tar sludges from coking operations)</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K142</ENT> <ENT>Tar storage tank residues from the production of coke from coal or from the recovery of coke by-products produced from coal</ENT> <ENT>(T)</ENT> </ROW> <ROW> <PRTPAGE P="72"/> <ENT I="02">K143</ENT> <ENT>Process residues from the recovery of light oil, including, but not limited to, those generated in stills, decanters, and wash oil recovery units from the recovery of coke by-products produced from coal</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K144</ENT> <ENT>Wastewater sump residues from light oil refining, including, but not limited to, intercepting or contamination sump sludges from the recovery of coke by-products produced from coal</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K145</ENT> <ENT>Residues from naphthalene collection and recovery operations from the recovery of coke by-products produced from coal</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K147</ENT> <ENT>Tar storage tank residues from coal tar refining</ENT> <ENT>(T)</ENT> </ROW> <ROW> <ENT I="02">K148</ENT> <ENT>Residues from coal tar distillation, including but not limited to, still bottoms</ENT> <ENT>(T)</ENT> </ROW> </GPOTABLE> <P>(b) <E T="03">Listing Specific Definitions:</E> (1) For the purposes of the K181 listing, dyes and/or pigments production is defined to include manufacture of the following product classes: dyes, pigments, or FDA certified colors that are classified as azo, triarylmethane, perylene or anthraquinone classes. Azo products include azo, monoazo, diazo, triazo, polyazo, azoic, benzidine, and pyrazolone products. Triarylmethane products include both triarylmethane and triphenylmethane products. Wastes that are not generated at a dyes and/or pigments manufacturing site, such as wastes from the offsite use, formulation, and packaging of dyes and/or pigments, are not included in the K181 listing.</P> <P>(c) <E T="03">K181 Listing Levels.</E> Nonwastewaters containing constituents in amounts equal to or exceeding the following levels during any calendar year are subject to the K181 listing, unless the conditions in the K181 listing are met.</P> <GPOTABLE CDEF="s25,9,7" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">Constituent</CHED> <CHED H="1">Chemical<LI>abstracts No.</LI> </CHED> <CHED H="1">Mass levels<LI>(kg/yr)</LI> </CHED> </BOXHD> <ROW> <ENT I="01">Aniline</ENT> <ENT>62-53-3</ENT> <ENT>9,300</ENT> </ROW> <ROW> <ENT I="01">o-Anisidine</ENT> <ENT>90-04-0</ENT> <ENT>110</ENT> </ROW> <ROW> <ENT I="01">4-Chloroaniline</ENT> <ENT>106-47-8</ENT> <ENT>4,800</ENT> </ROW> <ROW> <ENT I="01">p-Cresidine</ENT> <ENT>120-71-8</ENT> <ENT>660</ENT> </ROW> <ROW> <ENT I="01">2,4-Dimethylaniline</ENT> <ENT>95-68-1</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="01">1,2-Phenylenediamine</ENT> <ENT>95-54-5</ENT> <ENT>710</ENT> </ROW> <ROW> <ENT I="01">1,3-Phenylenediamine</ENT> <ENT>108-45-2</ENT> <ENT>1,200</ENT> </ROW> </GPOTABLE> <P>(d) <E T="03">Procedures for demonstrating that dyes and/or pigment nonwastewaters are not K181.</E> The procedures described in paragraphs (d)(1)-(d)(3) and (d)(5) of this section establish when nonwastewaters from the production of dyes/pigments would not be hazardous (these procedures apply to wastes that are not disposed in landfill units or treated in combustion units as specified in paragraph (a) of this section). If the nonwastewaters are disposed in landfill units or treated in combustion units as described in paragraph (a) of this section, then the nonwastewaters are not hazardous. In order to demonstrate that it is meeting the landfill disposal or combustion conditions contained in the K181 listing description, the generator must maintain documentation as described in paragraph (d)(4) of this section.</P> <P>(1) <E T="03">Determination based on no K181 constituents.</E> Generators that have knowledge (e.g., knowledge of constituents in wastes based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed) that their wastes contain none of the K181 constituents (<E T="03">see</E> paragraph (c) of this section) can use their knowledge to determine that their waste is not K181. The generator must document the basis for all such determinations on an annual basis and keep each annual documentation for three years.</P> <P>(2) <E T="03">Determination for generated quantities of 1,000 MT/yr or less for wastes that contain K181 constituents.</E> If the total annual quantity of dyes and/or pigment nonwastewaters generated is 1,000 metric tons or less, the generator can use knowledge of the wastes (e.g., knowledge of constituents in wastes based on prior analytical data and/or information about raw materials used, production processes used, and reaction and degradation products formed) to conclude that annual mass loadings for the K181 constituents are below the listing levels of paragraph (c) of this section. To make this determination, the generator must:</P> <P>(i) Each year document the basis for determining that the annual quantity <PRTPAGE P="73"/>of nonwastewaters expected to be generated will be less than 1,000 metric tons.</P> <P>(ii) Track the actual quantity of nonwastewaters generated from January 1 through December 31 of each year. If, at any time within the year, the actual waste quantity exceeds 1,000 metric tons, the generator must comply with the requirements of paragraph (d)(3) of this section for the remainder of the year.</P> <P>(iii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.</P> <P>(iv) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:</P> <P>(A) The quantity of dyes and/or pigment nonwastewaters generated.</P> <P>(B) The relevant process information used.</P> <P>(C) The calculations performed to determine annual total mass loadings for each K181 constituent in the nonwastewaters during the year.</P> <P>(3) <E T="03">Determination for generated quantities greater than 1,000 MT/yr for wastes that contain K181 constituents.</E> If the total annual quantity of dyes and/or pigment nonwastewaters generated is greater than 1,000 metric tons, the generator must perform all of the steps described in paragraphs ((d)(3)(i)-(d)(3)(xi) of this section) in order to make a determination that its waste is not K181.</P> <P>(i) Determine which K181 constituents (see paragraph (c) of this section) are reasonably expected to be present in the wastes based on knowledge of the wastes (e.g., based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed).</P> <P>(ii) If 1,2-phenylenediamine is present in the wastes, the generator can use either knowledge or sampling and analysis procedures to determine the level of this constituent in the wastes. For determinations based on use of knowledge, the generator must comply with the procedures for using knowledge described in paragraph (d)(2) of this section and keep the records described in paragraph (d)(2)(iv) of this section. For determinations based on sampling and analysis, the generator must comply with the sampling and analysis and recordkeeping requirements described below in this section.</P> <P>(iii) Develop a waste sampling and analysis plan (or modify an existing plan) to collect and analyze representative waste samples for the K181 constituents reasonably expected to be present in the wastes. At a minimum, the plan must include:</P> <P>(A) A discussion of the number of samples needed to characterize the wastes fully;</P> <P>(B) The planned sample collection method to obtain representative waste samples;</P> <P>(C) A discussion of how the sampling plan accounts for potential temporal and spatial variability of the wastes.</P> <P>(D) A detailed description of the test methods to be used, including sample preparation, clean up (if necessary), and determinative methods.</P> <P>(iv) Collect and analyze samples in accordance with the waste sampling and analysis plan.</P> <P>(A) The sampling and analysis must be unbiased, precise, and representative of the wastes.</P> <P>(B) The analytical measurements must be sufficiently sensitive, accurate and precise to support any claim that the constituent mass loadings are below the listing levels of paragraph (c) of this section.</P> <P>(v) Record the analytical results.</P> <P>(vi) Record the waste quantity represented by the sampling and analysis results.</P> <P>(vii) Calculate constituent-specific mass loadings (product of concentrations and waste quantity).</P> <P>(viii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.</P> <P>(ix) Determine whether the mass of any of the K181 constituents listed in paragraph (c) of this section generated between January 1 and December 31 of any year is below the K181 listing levels.</P> <P>(x) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:</P> <P>(A) The sampling and analysis plan.</P> <P>(B) The sampling and analysis results (including QA/QC data)<PRTPAGE P="74"/> </P> <P>(C) The quantity of dyes and/or pigment nonwastewaters generated.</P> <P>(D) The calculations performed to determine annual mass loadings.</P> <P>(xi) Nonhazardous waste determinations must be conducted annually to verify that the wastes remain nonhazardous.</P> <P>(A) The annual testing requirements are suspended after three consecutive successful annual demonstrations that the wastes are nonhazardous. The generator can then use knowledge of the wastes to support subsequent annual determinations.</P> <P>(B) The annual testing requirements are reinstated if the manufacturing or waste treatment processes generating the wastes are significantly altered, resulting in an increase of the potential for the wastes to exceed the listing levels.</P> <P>(C) If the annual testing requirements are suspended, the generator must keep records of the process knowledge information used to support a nonhazardous determination. If testing is reinstated, a description of the process change must be retained.</P> <P>(4) <E T="03">Recordkeeping for the landfill disposal and combustion exemptions.</E> For the purposes of meeting the landfill disposal and combustion condition set out in the K181 listing description, the generator must maintain on site for three years documentation demonstrating that each shipment of waste was received by a landfill unit that is subject to or meets the landfill design standards set out in the listing description, or was treated in combustion units as specified in the listing description.</P> <P>(5) <E T="03">Waste holding and handling.</E> During the interim period, from the point of generation to completion of the hazardous waste determination, the generator is responsible for storing the wastes appropriately. If the wastes are determined to be hazardous and the generator has not complied with the subtitle C requirements during the interim period, the generator could be subject to an enforcement action for improper management.</P> <CITA>[46 FR 4618, Jan. 16, 1981]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 261.32, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 261.33</SECTNO> <SUBJECT>Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof.</SUBJECT> <P>The following materials or items are hazardous wastes if and when they are discarded or intended to be discarded as described in § 261.2(a)(2)(i), when they are mixed with waste oil or used oil or other material and applied to the land for dust suppression or road treatment, when they are otherwise applied to the land in lieu of their original intended use or when they are contained in products that are applied to the land in lieu of their original intended use, or when, in lieu of their original intended use, they are produced for use as (or as a component of) a fuel, distributed for use as a fuel, or burned as a fuel.</P> <P>(a) Any commercial chemical product, or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section.</P> <P>(b) Any off-specification commercial chemical product or manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (e) or (f) of this section.</P> <P>(c) Any residue remaining in a container or in an inner liner removed from a container that has held any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraphs (e) or (f) of this section, unless the container is empty as defined in § 261.7(b) of this chapter. </P> <EXTRACT> <FP>[<E T="03">Comment:</E> Unless the residue is being beneficially used or reused, or legitimately recycled or reclaimed; or being accumulated, stored, transported or treated prior to such use, re-use, recycling or reclamation, EPA considers the residue to be intended for discard, and thus, a hazardous waste. An example of a legitimate re-use of the residue would be where the residue remains in the container and the container is used to hold the same commercial chemical product or manufacturing chemical intermediate it previously held. An example of the discard of the residue would be where the drum is sent to a drum reconditioner who reconditions the drum but discards the residue.]</FP> </EXTRACT> <P>(d) Any residue or contaminated soil, water or other debris resulting from <PRTPAGE P="75"/>the cleanup of a spill into or on any land or water of any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section, or any residue or contaminated soil, water or other debris resulting from the cleanup of a spill, into or on any land or water, of any off-specification chemical product and manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (e) or (f) of this section. </P> <EXTRACT> <FP>[<E T="03">Comment:</E> The phrase “commercial chemical product or manufacturing chemical intermediate having the generic name listed in ...” refers to a chemical substance which is manufactured or formulated for commercial or manufacturing use which consists of the commercially pure grade of the chemical, any technical grades of the chemical that are produced or marketed, and all formulations in which the chemical is the sole active ingredient. It does not refer to a material, such as a manufacturing process waste, that contains any of the substances listed in paragraph (e) or (f). Where a manufacturing process waste is deemed to be a hazardous waste because it contains a substance listed in paragraph (e) or (f), such waste will be listed in either § 261.31 or § 261.32 or will be identified as a hazardous waste by the characteristics set forth in subpart C of this part.]</FP> </EXTRACT> <P>(e) The commercial chemical products, manufacturing chemical intermediates or off-specification commercial chemical products or manufacturing chemical intermediates referred to in paragraphs (a) through (d) of this section, are identified as acute hazardous wastes (H) and are subject to the small quantity exclusion defined in § 261.5(e). </P> <EXTRACT> <FP>[<E T="03">Comment:</E> For the convenience of the regulated community the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), and R (Reactivity). Absence of a letter indicates that the compound only is listed for acute toxicity. Wastes are first listed in alphabetical order by substance and then listed again in numerical order by Hazardous Waste Number.]</FP> </EXTRACT> <P>These wastes and their corresponding EPA Hazardous Waste Numbers are:</P> <GPOTABLE CDEF="xls20,11,r150" COLS="3" OPTS="L2,nj,i1"> <BOXHD> <CHED H="1">Hazardous waste No.</CHED> <CHED H="1">Chemical abstracts No.</CHED> <CHED H="1">Substance</CHED> </BOXHD> <ROW> <ENT I="01">P023</ENT> <ENT>107-20-0</ENT> <ENT>Acetaldehyde, chloro-</ENT> </ROW> <ROW> <ENT I="01">P002</ENT> <ENT>591-08-2</ENT> <ENT>Acetamide, N-(aminothioxomethyl)-</ENT> </ROW> <ROW> <ENT I="01">P057</ENT> <ENT>640-19-7</ENT> <ENT>Acetamide, 2-fluoro-</ENT> </ROW> <ROW> <ENT I="01">P058</ENT> <ENT>62-74-8</ENT> <ENT>Acetic acid, fluoro-, sodium salt</ENT> </ROW> <ROW> <ENT I="01">P002</ENT> <ENT>591-08-2</ENT> <ENT>1-Acetyl-2-thiourea</ENT> </ROW> <ROW> <ENT I="01">P003</ENT> <ENT>107-02-8</ENT> <ENT>Acrolein</ENT> </ROW> <ROW> <ENT I="01">P070</ENT> <ENT>116-06-3</ENT> <ENT>Aldicarb</ENT> </ROW> <ROW> <ENT I="01">P203</ENT> <ENT>1646-88-4</ENT> <ENT>Aldicarb sulfone.</ENT> </ROW> <ROW> <ENT I="01">P004</ENT> <ENT>309-00-2</ENT> <ENT>Aldrin</ENT> </ROW> <ROW> <ENT I="01">P005</ENT> <ENT>107-18-6</ENT> <ENT>Allyl alcohol</ENT> </ROW> <ROW> <ENT I="01">P006</ENT> <ENT>20859-73-8</ENT> <ENT>Aluminum phosphide (R,T)</ENT> </ROW> <ROW> <ENT I="01">P007</ENT> <ENT>2763-96-4</ENT> <ENT>5-(Aminomethyl)-3-isoxazolol</ENT> </ROW> <ROW> <ENT I="01">P008</ENT> <ENT>504-24-5</ENT> <ENT>4-Aminopyridine</ENT> </ROW> <ROW> <ENT I="01">P009</ENT> <ENT>131-74-8</ENT> <ENT>Ammonium picrate (R)</ENT> </ROW> <ROW> <ENT I="01">P119</ENT> <ENT>7803-55-6</ENT> <ENT>Ammonium vanadate</ENT> </ROW> <ROW> <ENT I="01">P099</ENT> <ENT>506-61-6</ENT> <ENT>Argentate(1-), bis(cyano-C)-, potassium</ENT> </ROW> <ROW> <ENT I="01">P010</ENT> <ENT>7778-39-4</ENT> <ENT>Arsenic acid H<E T="52">3</E> AsO<E T="52">4</E> </ENT> </ROW> <ROW> <ENT I="01">P012</ENT> <ENT>1327-53-3</ENT> <ENT>Arsenic oxide As<E T="52">2</E> O<E T="52">3</E> </ENT> </ROW> <ROW> <ENT I="01">P011</ENT> <ENT>1303-28-2</ENT> <ENT>Arsenic oxide As<E T="52">2</E> O<E T="52">5</E> </ENT> </ROW> <ROW> <ENT I="01">P011</ENT> <ENT>1303-28-2</ENT> <ENT>Arsenic pentoxide</ENT> </ROW> <ROW> <ENT I="01">P012</ENT> <ENT>1327-53-3</ENT> <ENT>Arsenic trioxide</ENT> </ROW> <ROW> <ENT I="01">P038</ENT> <ENT>692-42-2</ENT> <ENT>Arsine, diethyl-</ENT> </ROW> <ROW> <ENT I="01">P036</ENT> <ENT>696-28-6</ENT> <ENT>Arsonous dichloride, phenyl-</ENT> </ROW> <ROW> <ENT I="01">P054</ENT> <ENT>151-56-4</ENT> <ENT>Aziridine</ENT> </ROW> <ROW> <ENT I="01">P067</ENT> <ENT>75-55-8</ENT> <ENT>Aziridine, 2-methyl-</ENT> </ROW> <ROW> <ENT I="01">P013</ENT> <ENT>542-62-1</ENT> <ENT>Barium cyanide</ENT> </ROW> <ROW> <ENT I="01">P024</ENT> <ENT>106-47-8</ENT> <ENT>Benzenamine, 4-chloro-</ENT> </ROW> <ROW> <ENT I="01">P077</ENT> <ENT>100-01-6</ENT> <ENT>Benzenamine, 4-nitro-</ENT> </ROW> <ROW> <ENT I="01">P028</ENT> <ENT>100-44-7</ENT> <ENT>Benzene, (chloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">P042</ENT> <ENT>51-43-4</ENT> <ENT>1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-, (R)-</ENT> </ROW> <ROW> <ENT I="01">P046</ENT> <ENT>122-09-8</ENT> <ENT>Benzeneethanamine, alpha,alpha-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">P014</ENT> <ENT>108-98-5</ENT> <ENT>Benzenethiol</ENT> </ROW> <ROW> <ENT I="01">P127</ENT> <ENT>1563-66-2</ENT> <ENT>7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, methylcarbamate.</ENT> </ROW> <ROW> <ENT I="01">P188</ENT> <ENT>57-64-7</ENT> <ENT>Benzoic acid, 2-hydroxy-, compd. with (3aS-cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methylcarbamate ester (1:1).</ENT> </ROW> <ROW> <PRTPAGE P="76"/> <ENT I="01">P001</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, & salts, when present at concentrations greater than 0.3%</ENT> </ROW> <ROW> <ENT I="01">P028</ENT> <ENT>100-44-7</ENT> <ENT>Benzyl chloride</ENT> </ROW> <ROW> <ENT I="01">P015</ENT> <ENT>7440-41-7</ENT> <ENT>Beryllium powder</ENT> </ROW> <ROW> <ENT I="01">P017</ENT> <ENT>598-31-2</ENT> <ENT>Bromoacetone</ENT> </ROW> <ROW> <ENT I="01">P018</ENT> <ENT>357-57-3</ENT> <ENT>Brucine</ENT> </ROW> <ROW> <ENT I="01">P045</ENT> <ENT>39196-18-4</ENT> <ENT>2-Butanone, 3,3-dimethyl-1-(methylthio)-, <LI>O-[(methylamino)carbonyl] oxime</LI> </ENT> </ROW> <ROW> <ENT I="01">P021</ENT> <ENT>592-01-8</ENT> <ENT>Calcium cyanide</ENT> </ROW> <ROW> <ENT I="01">P021</ENT> <ENT>592-01-8</ENT> <ENT>Calcium cyanide Ca(CN)<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P189</ENT> <ENT>55285-14-8</ENT> <ENT>Carbamic acid, [(dibutylamino)- thio]methyl-, 2,3-dihydro-2,2-dimethyl- 7-benzofuranyl ester.</ENT> </ROW> <ROW> <ENT I="01">P191</ENT> <ENT>644-64-4</ENT> <ENT>Carbamic acid, dimethyl-, 1-[(dimethyl-amino)carbonyl]- 5-methyl-1H- pyrazol-3-yl ester.</ENT> </ROW> <ROW> <ENT I="01">P192</ENT> <ENT>119-38-0</ENT> <ENT>Carbamic acid, dimethyl-, 3-methyl-1- (1-methylethyl)-1H- pyrazol-5-yl ester.</ENT> </ROW> <ROW> <ENT I="01">P190</ENT> <ENT>1129-41-5</ENT> <ENT>Carbamic acid, methyl-, 3-methylphenyl ester.</ENT> </ROW> <ROW> <ENT I="01">P127</ENT> <ENT>1563-66-2</ENT> <ENT>Carbofuran.</ENT> </ROW> <ROW> <ENT I="01">P022</ENT> <ENT>75-15-0</ENT> <ENT>Carbon disulfide</ENT> </ROW> <ROW> <ENT I="01">P095</ENT> <ENT>75-44-5</ENT> <ENT>Carbonic dichloride</ENT> </ROW> <ROW> <ENT I="01">P189</ENT> <ENT>55285-14-8</ENT> <ENT>Carbosulfan.</ENT> </ROW> <ROW> <ENT I="01">P023</ENT> <ENT>107-20-0</ENT> <ENT>Chloroacetaldehyde</ENT> </ROW> <ROW> <ENT I="01">P024</ENT> <ENT>106-47-8</ENT> <ENT>p-Chloroaniline</ENT> </ROW> <ROW> <ENT I="01">P026</ENT> <ENT>5344-82-1</ENT> <ENT>1-(o-Chlorophenyl)thiourea</ENT> </ROW> <ROW> <ENT I="01">P027</ENT> <ENT>542-76-7</ENT> <ENT>3-Chloropropionitrile</ENT> </ROW> <ROW> <ENT I="01">P029</ENT> <ENT>544-92-3</ENT> <ENT>Copper cyanide</ENT> </ROW> <ROW> <ENT I="01">P029</ENT> <ENT>544-92-3</ENT> <ENT>Copper cyanide Cu(CN)</ENT> </ROW> <ROW> <ENT I="01">P202</ENT> <ENT>64-00-6</ENT> <ENT>m-Cumenyl methylcarbamate.</ENT> </ROW> <ROW> <ENT I="01">P030</ENT> <ENT/> <ENT>Cyanides (soluble cyanide salts), not otherwise specified</ENT> </ROW> <ROW> <ENT I="01">P031</ENT> <ENT>460-19-5</ENT> <ENT>Cyanogen</ENT> </ROW> <ROW> <ENT I="01">P033</ENT> <ENT>506-77-4</ENT> <ENT>Cyanogen chloride</ENT> </ROW> <ROW> <ENT I="01">P033</ENT> <ENT>506-77-4</ENT> <ENT>Cyanogen chloride (CN)Cl</ENT> </ROW> <ROW> <ENT I="01">P034</ENT> <ENT>131-89-5</ENT> <ENT>2-Cyclohexyl-4,6-dinitrophenol</ENT> </ROW> <ROW> <ENT I="01">P016</ENT> <ENT>542-88-1</ENT> <ENT>Dichloromethyl ether</ENT> </ROW> <ROW> <ENT I="01">P036</ENT> <ENT>696-28-6</ENT> <ENT>Dichlorophenylarsine</ENT> </ROW> <ROW> <ENT I="01">P037</ENT> <ENT>60-57-1</ENT> <ENT>Dieldrin</ENT> </ROW> <ROW> <ENT I="01">P038</ENT> <ENT>692-42-2</ENT> <ENT>Diethylarsine</ENT> </ROW> <ROW> <ENT I="01">P041</ENT> <ENT>311-45-5</ENT> <ENT>Diethyl-p-nitrophenyl phosphate</ENT> </ROW> <ROW> <ENT I="01">P040</ENT> <ENT>297-97-2</ENT> <ENT>O,O-Diethyl O-pyrazinyl phosphorothioate</ENT> </ROW> <ROW> <ENT I="01">P043</ENT> <ENT>55-91-4</ENT> <ENT>Diisopropylfluorophosphate (DFP)</ENT> </ROW> <ROW> <ENT I="01">P004</ENT> <ENT>309-00-2</ENT> <ENT>1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexa- chloro-1,4,4a,5,8,8a,-hexahydro-, (1alpha,4alpha,4abeta,5alpha,8alpha,8abeta)- </ENT> </ROW> <ROW> <ENT I="01">P060</ENT> <ENT>465-73-6</ENT> <ENT>1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexa- chloro-1,4,4a,5,8,8a-hexahydro-, (1alpha,4alpha,4abeta,5beta,8beta,8abeta)- </ENT> </ROW> <ROW> <ENT I="01">P037</ENT> <ENT>60-57-1</ENT> <ENT>2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2aalpha,3beta,6beta,6aalpha,7beta, 7aalpha)-</ENT> </ROW> <ROW> <ENT I="01">P051</ENT> <ENT> <SU>1</SU> 72-20-8</ENT> <ENT>2,7:3,6-Dimethanonaphth [2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2abeta,3alpha,6alpha,6abeta,7beta, 7aalpha)-, & metabolites</ENT> </ROW> <ROW> <ENT I="01">P044</ENT> <ENT>60-51-5</ENT> <ENT>Dimethoate</ENT> </ROW> <ROW> <ENT I="01">P046</ENT> <ENT>122-09-8</ENT> <ENT>alpha,alpha-Dimethylphenethylamine</ENT> </ROW> <ROW> <ENT I="01">P191</ENT> <ENT>644-64-4</ENT> <ENT>Dimetilan.</ENT> </ROW> <ROW> <ENT I="01">P047</ENT> <ENT> <SU>1</SU> 534-52-1</ENT> <ENT>4,6-Dinitro-o-cresol, & salts</ENT> </ROW> <ROW> <ENT I="01">P048</ENT> <ENT>51-28-5</ENT> <ENT>2,4-Dinitrophenol</ENT> </ROW> <ROW> <ENT I="01">P020</ENT> <ENT>88-85-7</ENT> <ENT>Dinoseb</ENT> </ROW> <ROW> <ENT I="01">P085</ENT> <ENT>152-16-9</ENT> <ENT>Diphosphoramide, octamethyl-</ENT> </ROW> <ROW> <ENT I="01">P111</ENT> <ENT>107-49-3</ENT> <ENT>Diphosphoric acid, tetraethyl ester</ENT> </ROW> <ROW> <ENT I="01">P039</ENT> <ENT>298-04-4</ENT> <ENT>Disulfoton</ENT> </ROW> <ROW> <ENT I="01">P049</ENT> <ENT>541-53-7</ENT> <ENT>Dithiobiuret</ENT> </ROW> <ROW> <ENT I="01">P185</ENT> <ENT>26419-73-8</ENT> <ENT>1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-, O- [(methylamino)- carbonyl]oxime.</ENT> </ROW> <ROW> <ENT I="01">P050</ENT> <ENT>115-29-7</ENT> <ENT>Endosulfan</ENT> </ROW> <ROW> <ENT I="01">P088</ENT> <ENT>145-73-3</ENT> <ENT>Endothall</ENT> </ROW> <ROW> <ENT I="01">P051</ENT> <ENT>72-20-8</ENT> <ENT>Endrin</ENT> </ROW> <ROW> <ENT I="01">P051</ENT> <ENT>72-20-8</ENT> <ENT>Endrin, & metabolites</ENT> </ROW> <ROW> <ENT I="01">P042</ENT> <ENT>51-43-4</ENT> <ENT>Epinephrine</ENT> </ROW> <ROW> <ENT I="01">P031</ENT> <ENT>460-19-5</ENT> <ENT>Ethanedinitrile</ENT> </ROW> <ROW> <ENT I="01">P194</ENT> <ENT>23135-22-0</ENT> <ENT>Ethanimidothioic acid, 2-(dimethylamino)-N-[[(methylamino) carbonyl]oxy]-2-oxo-, methyl ester.</ENT> </ROW> <ROW> <ENT I="01">P066</ENT> <ENT>16752-77-5</ENT> <ENT>Ethanimidothioic acid,<LI>N-[[(methylamino)carbonyl]oxy]-, methyl ester</LI> </ENT> </ROW> <ROW> <ENT I="01">P101</ENT> <ENT>107-12-0</ENT> <ENT>Ethyl cyanide</ENT> </ROW> <ROW> <ENT I="01">P054</ENT> <ENT>151-56-4</ENT> <ENT>Ethyleneimine</ENT> </ROW> <ROW> <ENT I="01">P097</ENT> <ENT>52-85-7</ENT> <ENT>Famphur</ENT> </ROW> <ROW> <ENT I="01">P056</ENT> <ENT>7782-41-4</ENT> <ENT>Fluorine</ENT> </ROW> <ROW> <ENT I="01">P057</ENT> <ENT>640-19-7</ENT> <ENT>Fluoroacetamide</ENT> </ROW> <ROW> <PRTPAGE P="77"/> <ENT I="01">P058</ENT> <ENT>62-74-8</ENT> <ENT>Fluoroacetic acid, sodium salt</ENT> </ROW> <ROW> <ENT I="01">P198</ENT> <ENT>23422-53-9</ENT> <ENT>Formetanate hydrochloride.</ENT> </ROW> <ROW> <ENT I="01">P197</ENT> <ENT>17702-57-7</ENT> <ENT>Formparanate.</ENT> </ROW> <ROW> <ENT I="01">P065</ENT> <ENT>628-86-4</ENT> <ENT>Fulminic acid, mercury(2+) salt (R,T)</ENT> </ROW> <ROW> <ENT I="01">P059</ENT> <ENT>76-44-8</ENT> <ENT>Heptachlor</ENT> </ROW> <ROW> <ENT I="01">P062</ENT> <ENT>757-58-4</ENT> <ENT>Hexaethyl tetraphosphate</ENT> </ROW> <ROW> <ENT I="01">P116</ENT> <ENT>79-19-6</ENT> <ENT>Hydrazinecarbothioamide</ENT> </ROW> <ROW> <ENT I="01">P068</ENT> <ENT>60-34-4</ENT> <ENT>Hydrazine, methyl-</ENT> </ROW> <ROW> <ENT I="01">P063</ENT> <ENT>74-90-8</ENT> <ENT>Hydrocyanic acid</ENT> </ROW> <ROW> <ENT I="01">P063</ENT> <ENT>74-90-8</ENT> <ENT>Hydrogen cyanide</ENT> </ROW> <ROW> <ENT I="01">P096</ENT> <ENT>7803-51-2</ENT> <ENT>Hydrogen phosphide</ENT> </ROW> <ROW> <ENT I="01">P060</ENT> <ENT>465-73-6</ENT> <ENT>Isodrin</ENT> </ROW> <ROW> <ENT I="01">P192</ENT> <ENT>119-38-0</ENT> <ENT>Isolan.</ENT> </ROW> <ROW> <ENT I="01">P202</ENT> <ENT>64-00-6</ENT> <ENT>3-Isopropylphenyl N-methylcarbamate.</ENT> </ROW> <ROW> <ENT I="01">P007</ENT> <ENT>2763-96-4</ENT> <ENT>3(2H)-Isoxazolone, 5-(aminomethyl)-</ENT> </ROW> <ROW> <ENT I="01">P196</ENT> <ENT>15339-36-3</ENT> <ENT>Manganese, bis(dimethylcarbamodithioato-S,S′)-,</ENT> </ROW> <ROW> <ENT I="01">P196</ENT> <ENT>15339-36-3</ENT> <ENT>Manganese dimethyldithiocarbamate.</ENT> </ROW> <ROW> <ENT I="01">P092</ENT> <ENT>62-38-4</ENT> <ENT>Mercury, (acetato-O)phenyl-</ENT> </ROW> <ROW> <ENT I="01">P065</ENT> <ENT>628-86-4</ENT> <ENT>Mercury fulminate (R,T)</ENT> </ROW> <ROW> <ENT I="01">P082</ENT> <ENT>62-75-9</ENT> <ENT>Methanamine, N-methyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">P064</ENT> <ENT>624-83-9</ENT> <ENT>Methane, isocyanato-</ENT> </ROW> <ROW> <ENT I="01">P016</ENT> <ENT>542-88-1</ENT> <ENT>Methane, oxybis[chloro-</ENT> </ROW> <ROW> <ENT I="01">P112</ENT> <ENT>509-14-8</ENT> <ENT>Methane, tetranitro- (R)</ENT> </ROW> <ROW> <ENT I="01">P118</ENT> <ENT>75-70-7</ENT> <ENT>Methanethiol, trichloro-</ENT> </ROW> <ROW> <ENT I="01">P198</ENT> <ENT>23422-53-9</ENT> <ENT>Methanimidamide, N,N-dimethyl-N′-[3-[[(methylamino)-carbonyl]oxy]phenyl]-, monohydrochloride.</ENT> </ROW> <ROW> <ENT I="01">P197</ENT> <ENT>17702-57-7</ENT> <ENT>Methanimidamide, N,N-dimethyl-N′-[2-methyl-4-[[(methylamino)carbonyl]oxy]phenyl]-</ENT> </ROW> <ROW> <ENT I="01">P050</ENT> <ENT>115-29-7</ENT> <ENT>6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10-<LI>hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide</LI> </ENT> </ROW> <ROW> <ENT I="01">P059</ENT> <ENT>76-44-8</ENT> <ENT>4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro-<LI>3a,4,7,7a-tetrahydro-</LI> </ENT> </ROW> <ROW> <ENT I="01">P199</ENT> <ENT>2032-65-7</ENT> <ENT>Methiocarb.</ENT> </ROW> <ROW> <ENT I="01">P066</ENT> <ENT>16752-77-5</ENT> <ENT>Methomyl</ENT> </ROW> <ROW> <ENT I="01">P068</ENT> <ENT>60-34-4</ENT> <ENT>Methyl hydrazine</ENT> </ROW> <ROW> <ENT I="01">P064</ENT> <ENT>624-83-9</ENT> <ENT>Methyl isocyanate</ENT> </ROW> <ROW> <ENT I="01">P069</ENT> <ENT>75-86-5</ENT> <ENT>2-Methyllactonitrile</ENT> </ROW> <ROW> <ENT I="01">P071</ENT> <ENT>298-00-0</ENT> <ENT>Methyl parathion</ENT> </ROW> <ROW> <ENT I="01">P190</ENT> <ENT>1129-41-5</ENT> <ENT>Metolcarb.</ENT> </ROW> <ROW> <ENT I="01">P128</ENT> <ENT>315-8-4</ENT> <ENT>Mexacarbate.</ENT> </ROW> <ROW> <ENT I="01">P072</ENT> <ENT>86-88-4</ENT> <ENT>alpha-Naphthylthiourea</ENT> </ROW> <ROW> <ENT I="01">P073</ENT> <ENT>13463-39-3</ENT> <ENT>Nickel carbonyl</ENT> </ROW> <ROW> <ENT I="01">P073</ENT> <ENT>13463-39-3</ENT> <ENT>Nickel carbonyl Ni(CO)<E T="52">4</E>, (T-4)-</ENT> </ROW> <ROW> <ENT I="01">P074</ENT> <ENT>557-19-7</ENT> <ENT>Nickel cyanide</ENT> </ROW> <ROW> <ENT I="01">P074</ENT> <ENT>557-19-7</ENT> <ENT>Nickel cyanide Ni(CN)<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P075</ENT> <ENT> <SU>1</SU> 54-11-5</ENT> <ENT>Nicotine, & salts</ENT> </ROW> <ROW> <ENT I="01">P076</ENT> <ENT>10102-43-9</ENT> <ENT>Nitric oxide</ENT> </ROW> <ROW> <ENT I="01">P077</ENT> <ENT>100-01-6</ENT> <ENT>p-Nitroaniline</ENT> </ROW> <ROW> <ENT I="01">P078</ENT> <ENT>10102-44-0</ENT> <ENT>Nitrogen dioxide</ENT> </ROW> <ROW> <ENT I="01">P076</ENT> <ENT>10102-43-9</ENT> <ENT>Nitrogen oxide NO</ENT> </ROW> <ROW> <ENT I="01">P078</ENT> <ENT>10102-44-0</ENT> <ENT>Nitrogen oxide NO<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P081</ENT> <ENT>55-63-0</ENT> <ENT>Nitroglycerine (R)</ENT> </ROW> <ROW> <ENT I="01">P082</ENT> <ENT>62-75-9</ENT> <ENT>N-Nitrosodimethylamine</ENT> </ROW> <ROW> <ENT I="01">P084</ENT> <ENT>4549-40-0</ENT> <ENT>N-Nitrosomethylvinylamine</ENT> </ROW> <ROW> <ENT I="01">P085</ENT> <ENT>152-16-9</ENT> <ENT>Octamethylpyrophosphoramide</ENT> </ROW> <ROW> <ENT I="01">P087</ENT> <ENT>20816-12-0</ENT> <ENT>Osmium oxide OsO<E T="52">4</E>, (T-4)-</ENT> </ROW> <ROW> <ENT I="01">P087</ENT> <ENT>20816-12-0</ENT> <ENT>Osmium tetroxide</ENT> </ROW> <ROW> <ENT I="01">P088</ENT> <ENT>145-73-3</ENT> <ENT>7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid</ENT> </ROW> <ROW> <ENT I="01">P194</ENT> <ENT>23135-22-0</ENT> <ENT>Oxamyl.</ENT> </ROW> <ROW> <ENT I="01">P089</ENT> <ENT>56-38-2</ENT> <ENT>Parathion</ENT> </ROW> <ROW> <ENT I="01">P034</ENT> <ENT>131-89-5</ENT> <ENT>Phenol, 2-cyclohexyl-4,6-dinitro-</ENT> </ROW> <ROW> <ENT I="01">P048</ENT> <ENT>51-28-5</ENT> <ENT>Phenol, 2,4-dinitro-</ENT> </ROW> <ROW> <ENT I="01">P047</ENT> <ENT> <SU>1</SU> 534-52-1</ENT> <ENT>Phenol, 2-methyl-4,6-dinitro-, & salts</ENT> </ROW> <ROW> <ENT I="01">P020</ENT> <ENT>88-85-7</ENT> <ENT>Phenol, 2-(1-methylpropyl)-4,6-dinitro-</ENT> </ROW> <ROW> <ENT I="01">P009</ENT> <ENT>131-74-8</ENT> <ENT>Phenol, 2,4,6-trinitro-, ammonium salt (R)</ENT> </ROW> <ROW> <ENT I="01">P128</ENT> <ENT>315-18-4</ENT> <ENT>Phenol, 4-(dimethylamino)-3,5-dimethyl-, methylcarbamate (ester).</ENT> </ROW> <ROW> <ENT I="01">P199</ENT> <ENT>2032-65-7</ENT> <ENT>Phenol, (3,5-dimethyl-4-(methylthio)-, methylcarbamate</ENT> </ROW> <ROW> <ENT I="01">P202</ENT> <ENT>64-00-6</ENT> <ENT>Phenol, 3-(1-methylethyl)-, methyl carbamate.</ENT> </ROW> <ROW> <ENT I="01">P201</ENT> <ENT>2631-37-0</ENT> <ENT>Phenol, 3-methyl-5-(1-methylethyl)-, methyl carbamate.</ENT> </ROW> <ROW> <ENT I="01">P092</ENT> <ENT>62-38-4</ENT> <ENT>Phenylmercury acetate</ENT> </ROW> <ROW> <ENT I="01">P093</ENT> <ENT>103-85-5</ENT> <ENT>Phenylthiourea</ENT> </ROW> <ROW> <ENT I="01">P094</ENT> <ENT>298-02-2</ENT> <ENT>Phorate</ENT> </ROW> <ROW> <ENT I="01">P095</ENT> <ENT>75-44-5</ENT> <ENT>Phosgene</ENT> </ROW> <ROW> <ENT I="01">P096</ENT> <ENT>7803-51-2</ENT> <ENT>Phosphine</ENT> </ROW> <ROW> <PRTPAGE P="78"/> <ENT I="01">P041</ENT> <ENT>311-45-5</ENT> <ENT>Phosphoric acid, diethyl 4-nitrophenyl ester</ENT> </ROW> <ROW> <ENT I="01">P039</ENT> <ENT>298-04-4</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl<LI>S-[2-(ethylthio)ethyl] ester</LI> </ENT> </ROW> <ROW> <ENT I="01">P094</ENT> <ENT>298-02-2</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl<LI>S-[(ethylthio)methyl] ester</LI> </ENT> </ROW> <ROW> <ENT I="01">P044</ENT> <ENT>60-51-5</ENT> <ENT>Phosphorodithioic acid, O,O-dimethyl S-[2-(methyl-amino)-2-oxoethyl] ester</ENT> </ROW> <ROW> <ENT I="01">P043</ENT> <ENT>55-91-4</ENT> <ENT>Phosphorofluoridic acid, bis(1-methylethyl) ester</ENT> </ROW> <ROW> <ENT I="01">P089</ENT> <ENT>56-38-2</ENT> <ENT>Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) ester</ENT> </ROW> <ROW> <ENT I="01">P040</ENT> <ENT>297-97-2</ENT> <ENT>Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester</ENT> </ROW> <ROW> <ENT I="01">P097</ENT> <ENT>52-85-7</ENT> <ENT>Phosphorothioic acid,<LI>O-[4-[(dimethylamino)sulfonyl]phenyl] O,O-dimethyl ester</LI> </ENT> </ROW> <ROW> <ENT I="01">P071</ENT> <ENT>298-00-0</ENT> <ENT>Phosphorothioic acid, O,O,-dimethyl O-(4-nitrophenyl) ester</ENT> </ROW> <ROW> <ENT I="01">P204</ENT> <ENT>57-47-6</ENT> <ENT>Physostigmine.</ENT> </ROW> <ROW> <ENT I="01">P188</ENT> <ENT>57-64-7</ENT> <ENT>Physostigmine salicylate.</ENT> </ROW> <ROW> <ENT I="01">P110</ENT> <ENT>78-00-2</ENT> <ENT>Plumbane, tetraethyl-</ENT> </ROW> <ROW> <ENT I="01">P098</ENT> <ENT>151-50-8</ENT> <ENT>Potassium cyanide</ENT> </ROW> <ROW> <ENT I="01">P098</ENT> <ENT>151-50-8</ENT> <ENT>Potassium cyanide K(CN)</ENT> </ROW> <ROW> <ENT I="01">P099</ENT> <ENT>506-61-6</ENT> <ENT>Potassium silver cyanide</ENT> </ROW> <ROW> <ENT I="01">P201</ENT> <ENT>2631-37-0</ENT> <ENT>Promecarb</ENT> </ROW> <ROW> <ENT I="01">P070</ENT> <ENT>116-06-3</ENT> <ENT>Propanal, 2-methyl-2-(methylthio)-,<LI>O-[(methylamino)carbonyl]oxime</LI> </ENT> </ROW> <ROW> <ENT I="01">P203</ENT> <ENT>1646-88-4</ENT> <ENT>Propanal, 2-methyl-2-(methyl-sulfonyl)-, O-[(methylamino)carbonyl] oxime.</ENT> </ROW> <ROW> <ENT I="01">P101</ENT> <ENT>107-12-0</ENT> <ENT>Propanenitrile</ENT> </ROW> <ROW> <ENT I="01">P027</ENT> <ENT>542-76-7</ENT> <ENT>Propanenitrile, 3-chloro-</ENT> </ROW> <ROW> <ENT I="01">P069</ENT> <ENT>75-86-5</ENT> <ENT>Propanenitrile, 2-hydroxy-2-methyl-</ENT> </ROW> <ROW> <ENT I="01">P081</ENT> <ENT>55-63-0</ENT> <ENT>1,2,3-Propanetriol, trinitrate (R)</ENT> </ROW> <ROW> <ENT I="01">P017</ENT> <ENT>598-31-2</ENT> <ENT>2-Propanone, 1-bromo-</ENT> </ROW> <ROW> <ENT I="01">P102</ENT> <ENT>107-19-7</ENT> <ENT>Propargyl alcohol</ENT> </ROW> <ROW> <ENT I="01">P003</ENT> <ENT>107-02-8</ENT> <ENT>2-Propenal</ENT> </ROW> <ROW> <ENT I="01">P005</ENT> <ENT>107-18-6</ENT> <ENT>2-Propen-1-ol</ENT> </ROW> <ROW> <ENT I="01">P067</ENT> <ENT>75-55-8</ENT> <ENT>1,2-Propylenimine</ENT> </ROW> <ROW> <ENT I="01">P102</ENT> <ENT>107-19-7</ENT> <ENT>2-Propyn-1-ol</ENT> </ROW> <ROW> <ENT I="01">P008</ENT> <ENT>504-24-5</ENT> <ENT>4-Pyridinamine</ENT> </ROW> <ROW> <ENT I="01">P075</ENT> <ENT> <SU>1</SU> 54-11-5</ENT> <ENT>Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)-, & salts</ENT> </ROW> <ROW> <ENT I="01">P204</ENT> <ENT>57-47-6</ENT> <ENT>Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethyl-,<LI>methylcarbamate (ester), (3aS-cis)-.</LI> </ENT> </ROW> <ROW> <ENT I="01">P114</ENT> <ENT>12039-52-0</ENT> <ENT>Selenious acid, dithallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">P103</ENT> <ENT>630-10-4</ENT> <ENT>Selenourea</ENT> </ROW> <ROW> <ENT I="01">P104</ENT> <ENT>506-64-9</ENT> <ENT>Silver cyanide</ENT> </ROW> <ROW> <ENT I="01">P104</ENT> <ENT>506-64-9</ENT> <ENT>Silver cyanide Ag(CN)</ENT> </ROW> <ROW> <ENT I="01">P105</ENT> <ENT>26628-22-8</ENT> <ENT>Sodium azide</ENT> </ROW> <ROW> <ENT I="01">P106</ENT> <ENT>143-33-9</ENT> <ENT>Sodium cyanide</ENT> </ROW> <ROW> <ENT I="01">P106</ENT> <ENT>143-33-9</ENT> <ENT>Sodium cyanide Na(CN)</ENT> </ROW> <ROW> <ENT I="01">P108</ENT> <ENT> <SU>1</SU> 57-24-9</ENT> <ENT>Strychnidin-10-one, & salts</ENT> </ROW> <ROW> <ENT I="01">P018</ENT> <ENT>357-57-3</ENT> <ENT>Strychnidin-10-one, 2,3-dimethoxy-</ENT> </ROW> <ROW> <ENT I="01">P108</ENT> <ENT> <SU>1</SU> 57-24-9</ENT> <ENT>Strychnine, & salts</ENT> </ROW> <ROW> <ENT I="01">P115</ENT> <ENT>7446-18-6</ENT> <ENT>Sulfuric acid, dithallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">P109</ENT> <ENT>3689-24-5</ENT> <ENT>Tetraethyldithiopyrophosphate</ENT> </ROW> <ROW> <ENT I="01">P110</ENT> <ENT>78-00-2</ENT> <ENT>Tetraethyl lead</ENT> </ROW> <ROW> <ENT I="01">P111</ENT> <ENT>107-49-3</ENT> <ENT>Tetraethyl pyrophosphate</ENT> </ROW> <ROW> <ENT I="01">P112</ENT> <ENT>509-14-8</ENT> <ENT>Tetranitromethane (R)</ENT> </ROW> <ROW> <ENT I="01">P062</ENT> <ENT>757-58-4</ENT> <ENT>Tetraphosphoric acid, hexaethyl ester</ENT> </ROW> <ROW> <ENT I="01">P113</ENT> <ENT>1314-32-5</ENT> <ENT>Thallic oxide</ENT> </ROW> <ROW> <ENT I="01">P113</ENT> <ENT>1314-32-5</ENT> <ENT>Thallium oxide Tl<E T="52">2</E> O<E T="52">3</E> </ENT> </ROW> <ROW> <ENT I="01">P114</ENT> <ENT>12039-52-0</ENT> <ENT>Thallium(I) selenite</ENT> </ROW> <ROW> <ENT I="01">P115</ENT> <ENT>7446-18-6</ENT> <ENT>Thallium(I) sulfate</ENT> </ROW> <ROW> <ENT I="01">P109</ENT> <ENT>3689-24-5</ENT> <ENT>Thiodiphosphoric acid, tetraethyl ester</ENT> </ROW> <ROW> <ENT I="01">P045</ENT> <ENT>39196-18-4</ENT> <ENT>Thiofanox</ENT> </ROW> <ROW> <ENT I="01">P049</ENT> <ENT>541-53-7</ENT> <ENT>Thioimidodicarbonic diamide [(H<E T="52">2</E> N)C(S)]<E T="52">2</E> NH</ENT> </ROW> <ROW> <ENT I="01">P014</ENT> <ENT>108-98-5</ENT> <ENT>Thiophenol</ENT> </ROW> <ROW> <ENT I="01">P116</ENT> <ENT>79-19-6</ENT> <ENT>Thiosemicarbazide</ENT> </ROW> <ROW> <ENT I="01">P026</ENT> <ENT>5344-82-1</ENT> <ENT>Thiourea, (2-chlorophenyl)-</ENT> </ROW> <ROW> <ENT I="01">P072</ENT> <ENT>86-88-4</ENT> <ENT>Thiourea, 1-naphthalenyl-</ENT> </ROW> <ROW> <ENT I="01">P093</ENT> <ENT>103-85-5</ENT> <ENT>Thiourea, phenyl-</ENT> </ROW> <ROW> <ENT I="01">P185</ENT> <ENT>26419-73-8</ENT> <ENT>Tirpate.</ENT> </ROW> <ROW> <ENT I="01">P123</ENT> <ENT>8001-35-2</ENT> <ENT>Toxaphene</ENT> </ROW> <ROW> <ENT I="01">P118</ENT> <ENT>75-70-7</ENT> <ENT>Trichloromethanethiol</ENT> </ROW> <ROW> <ENT I="01">P119</ENT> <ENT>7803-55-6</ENT> <ENT>Vanadic acid, ammonium salt</ENT> </ROW> <ROW> <ENT I="01">P120</ENT> <ENT>1314-62-1</ENT> <ENT>Vanadium oxide V<E T="52">2</E> O<E T="52">5</E> </ENT> </ROW> <ROW> <ENT I="01">P120</ENT> <ENT>1314-62-1</ENT> <ENT>Vanadium pentoxide</ENT> </ROW> <ROW> <ENT I="01">P084</ENT> <ENT>4549-40-0</ENT> <ENT>Vinylamine, N-methyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">P001</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>Warfarin, & salts, when present at concentrations greater than 0.3%</ENT> </ROW> <ROW> <PRTPAGE P="79"/> <ENT I="01">P205</ENT> <ENT>137-30-4</ENT> <ENT>Zinc, bis(dimethylcarbamodithioato-S,S′)-,</ENT> </ROW> <ROW> <ENT I="01">P121</ENT> <ENT>557-21-1</ENT> <ENT>Zinc cyanide</ENT> </ROW> <ROW> <ENT I="01">P121</ENT> <ENT>557-21-1</ENT> <ENT>Zinc cyanide Zn(CN)<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P122</ENT> <ENT>1314-84-7</ENT> <ENT>Zinc phosphide Zn<E T="52">3</E> P<E T="52">2</E>, when present at concentrations greater than 10% (R,T)</ENT> </ROW> <ROW> <ENT I="01">P205</ENT> <ENT>137-30-4</ENT> <ENT>Ziram.</ENT> </ROW> <ROW> <ENT I="01">P001</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, & salts, when present at concentrations greater than 0.3%</ENT> </ROW> <ROW> <ENT I="01">P001</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>Warfarin, & salts, when present at concentrations greater than 0.3%</ENT> </ROW> <ROW> <ENT I="01">P002</ENT> <ENT>591-08-2</ENT> <ENT>Acetamide, -(aminothioxomethyl)-</ENT> </ROW> <ROW> <ENT I="01">P002</ENT> <ENT>591-08-2</ENT> <ENT>1-Acetyl-2-thiourea</ENT> </ROW> <ROW> <ENT I="01">P003</ENT> <ENT>107-02-8</ENT> <ENT>Acrolein</ENT> </ROW> <ROW> <ENT I="01">P003</ENT> <ENT>107-02-8</ENT> <ENT>2-Propenal</ENT> </ROW> <ROW> <ENT I="01">P004</ENT> <ENT>309-00-2</ENT> <ENT>Aldrin</ENT> </ROW> <ROW> <ENT I="01">P004</ENT> <ENT>309-00-2</ENT> <ENT>1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexa-chloro-1,4,4a,5,8,8a,-hexahydro-, (1alpha,4alpha,4abeta,5alpha,8alpha,8abeta)-</ENT> </ROW> <ROW> <ENT I="01">P005</ENT> <ENT>107-18-6</ENT> <ENT>Allyl alcohol</ENT> </ROW> <ROW> <ENT I="01">P005</ENT> <ENT>107-18-6</ENT> <ENT>2-Propen-1-ol</ENT> </ROW> <ROW> <ENT I="01">P006</ENT> <ENT>20859-73-8</ENT> <ENT>Aluminum phosphide (R,T)</ENT> </ROW> <ROW> <ENT I="01">P007</ENT> <ENT>2763-96-4</ENT> <ENT>5-(Aminomethyl)-3-isoxazolol</ENT> </ROW> <ROW> <ENT I="01">P007</ENT> <ENT>2763-96-4</ENT> <ENT>3(2H)-Isoxazolone, 5-(aminomethyl)-</ENT> </ROW> <ROW> <ENT I="01">P008</ENT> <ENT>504-24-5</ENT> <ENT>4-Aminopyridine</ENT> </ROW> <ROW> <ENT I="01">P008</ENT> <ENT>504-24-5</ENT> <ENT>4-Pyridinamine</ENT> </ROW> <ROW> <ENT I="01">P009</ENT> <ENT>131-74-8</ENT> <ENT>Ammonium picrate (R)</ENT> </ROW> <ROW> <ENT I="01">P009</ENT> <ENT>131-74-8</ENT> <ENT>Phenol, 2,4,6-trinitro-, ammonium salt (R)</ENT> </ROW> <ROW> <ENT I="01">P010</ENT> <ENT>7778-39-4</ENT> <ENT>Arsenic acid H<E T="52">3</E> AsO<E T="52">4</E> </ENT> </ROW> <ROW> <ENT I="01">P011</ENT> <ENT>1303-28-2</ENT> <ENT>Arsenic oxide As<E T="52">2</E> O<E T="52">5</E> </ENT> </ROW> <ROW> <ENT I="01">P011</ENT> <ENT>1303-28-2</ENT> <ENT>Arsenic pentoxide</ENT> </ROW> <ROW> <ENT I="01">P012</ENT> <ENT>1327-53-3</ENT> <ENT>Arsenic oxide As<E T="52">2</E> O<E T="52">3</E> </ENT> </ROW> <ROW> <ENT I="01">P012</ENT> <ENT>1327-53-3</ENT> <ENT>Arsenic trioxide</ENT> </ROW> <ROW> <ENT I="01">P013</ENT> <ENT>542-62-1</ENT> <ENT>Barium cyanide</ENT> </ROW> <ROW> <ENT I="01">P014</ENT> <ENT>108-98-5</ENT> <ENT>Benzenethiol</ENT> </ROW> <ROW> <ENT I="01">P014</ENT> <ENT>108-98-5</ENT> <ENT>Thiophenol</ENT> </ROW> <ROW> <ENT I="01">P015</ENT> <ENT>7440-41-7</ENT> <ENT>Beryllium powder</ENT> </ROW> <ROW> <ENT I="01">P016</ENT> <ENT>542-88-1</ENT> <ENT>Dichloromethyl ether</ENT> </ROW> <ROW> <ENT I="01">P016</ENT> <ENT>542-88-1</ENT> <ENT>Methane, oxybis[chloro-</ENT> </ROW> <ROW> <ENT I="01">P017</ENT> <ENT>598-31-2</ENT> <ENT>Bromoacetone</ENT> </ROW> <ROW> <ENT I="01">P017</ENT> <ENT>598-31-2</ENT> <ENT>2-Propanone, 1-bromo-</ENT> </ROW> <ROW> <ENT I="01">P018</ENT> <ENT>357-57-3</ENT> <ENT>Brucine</ENT> </ROW> <ROW> <ENT I="01">P018</ENT> <ENT>357-57-3</ENT> <ENT>Strychnidin-10-one, 2,3-dimethoxy-</ENT> </ROW> <ROW> <ENT I="01">P020</ENT> <ENT>88-85-7</ENT> <ENT>Dinoseb</ENT> </ROW> <ROW> <ENT I="01">P020</ENT> <ENT>88-85-7</ENT> <ENT>Phenol, 2-(1-methylpropyl)-4,6-dinitro-</ENT> </ROW> <ROW> <ENT I="01">P021</ENT> <ENT>592-01-8</ENT> <ENT>Calcium cyanide</ENT> </ROW> <ROW> <ENT I="01">P021</ENT> <ENT>592-01-8</ENT> <ENT>Calcium cyanide Ca(CN)<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P022</ENT> <ENT>75-15-0</ENT> <ENT>Carbon disulfide</ENT> </ROW> <ROW> <ENT I="01">P023</ENT> <ENT>107-20-0</ENT> <ENT>Acetaldehyde, chloro-</ENT> </ROW> <ROW> <ENT I="01">P023</ENT> <ENT>107-20-0</ENT> <ENT>Chloroacetaldehyde</ENT> </ROW> <ROW> <ENT I="01">P024</ENT> <ENT>106-47-8</ENT> <ENT>Benzenamine, 4-chloro-</ENT> </ROW> <ROW> <ENT I="01">P024</ENT> <ENT>106-47-8</ENT> <ENT>p-Chloroaniline</ENT> </ROW> <ROW> <ENT I="01">P026</ENT> <ENT>5344-82-1</ENT> <ENT>1-(o-Chlorophenyl)thiourea</ENT> </ROW> <ROW> <ENT I="01">P026</ENT> <ENT>5344-82-1</ENT> <ENT>Thiourea, (2-chlorophenyl)-</ENT> </ROW> <ROW> <ENT I="01">P027</ENT> <ENT>542-76-7</ENT> <ENT>3-Chloropropionitrile</ENT> </ROW> <ROW> <ENT I="01">P027</ENT> <ENT>542-76-7</ENT> <ENT>Propanenitrile, 3-chloro-</ENT> </ROW> <ROW> <ENT I="01">P028</ENT> <ENT>100-44-7</ENT> <ENT>Benzene, (chloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">P028</ENT> <ENT>100-44-7</ENT> <ENT>Benzyl chloride</ENT> </ROW> <ROW> <ENT I="01">P029</ENT> <ENT>544-92-3</ENT> <ENT>Copper cyanide</ENT> </ROW> <ROW> <ENT I="01">P029</ENT> <ENT>544-92-3</ENT> <ENT>Copper cyanide Cu(CN)</ENT> </ROW> <ROW> <ENT I="01">P030</ENT> <ENT/> <ENT>Cyanides (soluble cyanide salts), not otherwise specified</ENT> </ROW> <ROW> <ENT I="01">P031</ENT> <ENT>460-19-5</ENT> <ENT>Cyanogen</ENT> </ROW> <ROW> <ENT I="01">P031</ENT> <ENT>460-19-5</ENT> <ENT>Ethanedinitrile</ENT> </ROW> <ROW> <ENT I="01">P033</ENT> <ENT>506-77-4</ENT> <ENT>Cyanogen chloride</ENT> </ROW> <ROW> <ENT I="01">P033</ENT> <ENT>506-77-4</ENT> <ENT>Cyanogen chloride (CN)Cl</ENT> </ROW> <ROW> <ENT I="01">P034</ENT> <ENT>131-89-5</ENT> <ENT>2-Cyclohexyl-4,6-dinitrophenol</ENT> </ROW> <ROW> <ENT I="01">P034</ENT> <ENT>131-89-5</ENT> <ENT>Phenol, 2-cyclohexyl-4,6-dinitro-</ENT> </ROW> <ROW> <ENT I="01">P036</ENT> <ENT>696-28-6</ENT> <ENT>Arsonous dichloride, phenyl-</ENT> </ROW> <ROW> <ENT I="01">P036</ENT> <ENT>696-28-6</ENT> <ENT>Dichlorophenylarsine</ENT> </ROW> <ROW> <ENT I="01">P037</ENT> <ENT>60-57-1</ENT> <ENT>Dieldrin</ENT> </ROW> <ROW> <ENT I="01">P037</ENT> <ENT>60-57-1</ENT> <ENT>2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2aalpha,3beta,6beta,6aalpha,7beta, 7aalpha)-</ENT> </ROW> <ROW> <ENT I="01">P038</ENT> <ENT>692-42-2</ENT> <ENT>Arsine, diethyl-</ENT> </ROW> <ROW> <ENT I="01">P038</ENT> <ENT>692-42-2</ENT> <ENT>Diethylarsine</ENT> </ROW> <ROW> <ENT I="01">P039</ENT> <ENT>298-04-4</ENT> <ENT>Disulfoton</ENT> </ROW> <ROW> <ENT I="01">P039</ENT> <ENT>298-04-4</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-[2-(ethylthio)ethyl] ester</ENT> </ROW> <ROW> <PRTPAGE P="80"/> <ENT I="01">P040</ENT> <ENT>297-97-2</ENT> <ENT>O,O-Diethyl O-pyrazinyl phosphorothioate</ENT> </ROW> <ROW> <ENT I="01">P040</ENT> <ENT>297-97-2</ENT> <ENT>Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester</ENT> </ROW> <ROW> <ENT I="01">P041</ENT> <ENT>311-45-5</ENT> <ENT>Diethyl-p-nitrophenyl phosphate</ENT> </ROW> <ROW> <ENT I="01">P041</ENT> <ENT>311-45-5</ENT> <ENT>Phosphoric acid, diethyl 4-nitrophenyl ester</ENT> </ROW> <ROW> <ENT I="01">P042</ENT> <ENT>51-43-4</ENT> <ENT>1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-, (R)-</ENT> </ROW> <ROW> <ENT I="01">P042</ENT> <ENT>51-43-4</ENT> <ENT>Epinephrine</ENT> </ROW> <ROW> <ENT I="01">P043</ENT> <ENT>55-91-4</ENT> <ENT>Diisopropylfluorophosphate (DFP)</ENT> </ROW> <ROW> <ENT I="01">P043</ENT> <ENT>55-91-4</ENT> <ENT>Phosphorofluoridic acid, bis(1-methylethyl) ester</ENT> </ROW> <ROW> <ENT I="01">P044</ENT> <ENT>60-51-5</ENT> <ENT>Dimethoate</ENT> </ROW> <ROW> <ENT I="01">P044</ENT> <ENT>60-51-5</ENT> <ENT>Phosphorodithioic acid, O,O-dimethyl S-[2-(methyl amino)-2-oxoethyl] ester</ENT> </ROW> <ROW> <ENT I="01">P045</ENT> <ENT>39196-18-4</ENT> <ENT>2-Butanone, 3,3-dimethyl-1-(methylthio)-, O-[(methylamino)carbonyl] oxime</ENT> </ROW> <ROW> <ENT I="01">P045</ENT> <ENT>39196-18-4</ENT> <ENT>Thiofanox</ENT> </ROW> <ROW> <ENT I="01">P046</ENT> <ENT>122-09-8</ENT> <ENT>Benzeneethanamine, alpha,alpha-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">P046</ENT> <ENT>122-09-8</ENT> <ENT>alpha,alpha-Dimethylphenethylamine</ENT> </ROW> <ROW> <ENT I="01">P047</ENT> <ENT> <SU>1</SU> 534-52-1</ENT> <ENT>4,6-Dinitro-o-cresol, & salts</ENT> </ROW> <ROW> <ENT I="01">P047</ENT> <ENT> <SU>1</SU> 534-52-1</ENT> <ENT>Phenol, 2-methyl-4,6-dinitro-, & salts</ENT> </ROW> <ROW> <ENT I="01">P048</ENT> <ENT>51-28-5</ENT> <ENT>2,4-Dinitrophenol</ENT> </ROW> <ROW> <ENT I="01">P048</ENT> <ENT>51-28-5</ENT> <ENT>Phenol, 2,4-dinitro-</ENT> </ROW> <ROW> <ENT I="01">P049</ENT> <ENT>541-53-7</ENT> <ENT>Dithiobiuret</ENT> </ROW> <ROW> <ENT I="01">P049</ENT> <ENT>541-53-7</ENT> <ENT>Thioimidodicarbonic diamide [(H<E T="52">2</E> N)C(S)]<E T="52">2</E> NH</ENT> </ROW> <ROW> <ENT I="01">P050</ENT> <ENT>115-29-7</ENT> <ENT>Endosulfan</ENT> </ROW> <ROW> <ENT I="01">P050</ENT> <ENT>115-29-7</ENT> <ENT>6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide</ENT> </ROW> <ROW> <ENT I="01">P051</ENT> <ENT> <SU>1</SU> 72-20-8</ENT> <ENT>2,7:3,6-Dimethanonaphth [2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2abeta,3alpha,6alpha,6abeta,7beta, 7aalpha)-, & metabolites</ENT> </ROW> <ROW> <ENT I="01">P051</ENT> <ENT>72-20-8</ENT> <ENT>Endrin</ENT> </ROW> <ROW> <ENT I="01">P051</ENT> <ENT>72-20-8</ENT> <ENT>Endrin, & metabolites</ENT> </ROW> <ROW> <ENT I="01">P054</ENT> <ENT>151-56-4</ENT> <ENT>Aziridine</ENT> </ROW> <ROW> <ENT I="01">P054</ENT> <ENT>151-56-4</ENT> <ENT>Ethyleneimine</ENT> </ROW> <ROW> <ENT I="01">P056</ENT> <ENT>7782-41-4</ENT> <ENT>Fluorine</ENT> </ROW> <ROW> <ENT I="01">P057</ENT> <ENT>640-19-7</ENT> <ENT>Acetamide, 2-fluoro-</ENT> </ROW> <ROW> <ENT I="01">P057</ENT> <ENT>640-19-7</ENT> <ENT>Fluoroacetamide</ENT> </ROW> <ROW> <ENT I="01">P058</ENT> <ENT>62-74-8</ENT> <ENT>Acetic acid, fluoro-, sodium salt</ENT> </ROW> <ROW> <ENT I="01">P058</ENT> <ENT>62-74-8</ENT> <ENT>Fluoroacetic acid, sodium salt</ENT> </ROW> <ROW> <ENT I="01">P059</ENT> <ENT>76-44-8</ENT> <ENT>Heptachlor</ENT> </ROW> <ROW> <ENT I="01">P059</ENT> <ENT>76-44-8</ENT> <ENT>4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-</ENT> </ROW> <ROW> <ENT I="01">P060</ENT> <ENT>465-73-6</ENT> <ENT>1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexa-chloro-1,4,4a,5,8,8a-hexahydro-, (1alpha,4alpha,4abeta,5beta,8beta,8abeta)-</ENT> </ROW> <ROW> <ENT I="01">P060</ENT> <ENT>465-73-6</ENT> <ENT>Isodrin</ENT> </ROW> <ROW> <ENT I="01">P062</ENT> <ENT>757-58-4</ENT> <ENT>Hexaethyl tetraphosphate</ENT> </ROW> <ROW> <ENT I="01">P062</ENT> <ENT>757-58-4</ENT> <ENT>Tetraphosphoric acid, hexaethyl ester</ENT> </ROW> <ROW> <ENT I="01">P063</ENT> <ENT>74-90-8</ENT> <ENT>Hydrocyanic acid</ENT> </ROW> <ROW> <ENT I="01">P063</ENT> <ENT>74-90-8</ENT> <ENT>Hydrogen cyanide</ENT> </ROW> <ROW> <ENT I="01">P064</ENT> <ENT>624-83-9</ENT> <ENT>Methane, isocyanato-</ENT> </ROW> <ROW> <ENT I="01">P064</ENT> <ENT>624-83-9</ENT> <ENT>Methyl isocyanate</ENT> </ROW> <ROW> <ENT I="01">P065</ENT> <ENT>628-86-4</ENT> <ENT>Fulminic acid, mercury(2+) salt (R,T)</ENT> </ROW> <ROW> <ENT I="01">P065</ENT> <ENT>628-86-4</ENT> <ENT>Mercury fulminate (R,T)</ENT> </ROW> <ROW> <ENT I="01">P066</ENT> <ENT>16752-77-5</ENT> <ENT>Ethanimidothioic acid, N-[[(methylamino)carbonyl]oxy]-, methyl ester</ENT> </ROW> <ROW> <ENT I="01">P066</ENT> <ENT>16752-77-5</ENT> <ENT>Methomyl</ENT> </ROW> <ROW> <ENT I="01">P067</ENT> <ENT>75-55-8</ENT> <ENT>Aziridine, 2-methyl-</ENT> </ROW> <ROW> <ENT I="01">P067</ENT> <ENT>75-55-8</ENT> <ENT>1,2-Propylenimine</ENT> </ROW> <ROW> <ENT I="01">P068</ENT> <ENT>60-34-4</ENT> <ENT>Hydrazine, methyl-</ENT> </ROW> <ROW> <ENT I="01">P068</ENT> <ENT>60-34-4</ENT> <ENT>Methyl hydrazine</ENT> </ROW> <ROW> <ENT I="01">P069</ENT> <ENT>75-86-5</ENT> <ENT>2-Methyllactonitrile</ENT> </ROW> <ROW> <ENT I="01">P069</ENT> <ENT>75-86-5</ENT> <ENT>Propanenitrile, 2-hydroxy-2-methyl-</ENT> </ROW> <ROW> <ENT I="01">P070</ENT> <ENT>116-06-3</ENT> <ENT>Aldicarb</ENT> </ROW> <ROW> <ENT I="01">P070</ENT> <ENT>116-06-3</ENT> <ENT>Propanal, 2-methyl-2-(methylthio)-, O-[(methylamino)carbonyl]oxime</ENT> </ROW> <ROW> <ENT I="01">P071</ENT> <ENT>298-00-0</ENT> <ENT>Methyl parathion</ENT> </ROW> <ROW> <ENT I="01">P071</ENT> <ENT>298-00-0</ENT> <ENT>Phosphorothioic acid, O,O,-dimethyl O-(4-nitrophenyl) ester</ENT> </ROW> <ROW> <ENT I="01">P072</ENT> <ENT>86-88-4</ENT> <ENT>alpha-Naphthylthiourea</ENT> </ROW> <ROW> <ENT I="01">P072</ENT> <ENT>86-88-4</ENT> <ENT>Thiourea, 1-naphthalenyl-</ENT> </ROW> <ROW> <ENT I="01">P073</ENT> <ENT>13463-39-3</ENT> <ENT>Nickel carbonyl</ENT> </ROW> <ROW> <ENT I="01">P073</ENT> <ENT>13463-39-3</ENT> <ENT>Nickel carbonyl Ni(CO)<E T="52">4</E>, (T-4)-</ENT> </ROW> <ROW> <ENT I="01">P074</ENT> <ENT>557-19-7</ENT> <ENT>Nickel cyanide</ENT> </ROW> <ROW> <ENT I="01">P074</ENT> <ENT>557-19-7</ENT> <ENT>Nickel cyanide Ni(CN)<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P075</ENT> <ENT> <SU>1</SU> 54-11-5</ENT> <ENT>Nicotine, & salts</ENT> </ROW> <ROW> <ENT I="01">P075</ENT> <ENT> <SU>1</SU> 54-11-5</ENT> <ENT>Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)-, & salts</ENT> </ROW> <ROW> <ENT I="01">P076</ENT> <ENT>10102-43-9</ENT> <ENT>Nitric oxide</ENT> </ROW> <ROW> <ENT I="01">P076</ENT> <ENT>10102-43-9</ENT> <ENT>Nitrogen oxide NO</ENT> </ROW> <ROW> <ENT I="01">P077</ENT> <ENT>100-01-6</ENT> <ENT>Benzenamine, 4-nitro-</ENT> </ROW> <ROW> <ENT I="01">P077</ENT> <ENT>100-01-6</ENT> <ENT>p-Nitroaniline</ENT> </ROW> <ROW> <ENT I="01">P078</ENT> <ENT>10102-44-0</ENT> <ENT>Nitrogen dioxide</ENT> </ROW> <ROW> <ENT I="01">P078</ENT> <ENT>10102-44-0</ENT> <ENT>Nitrogen oxide NO<E T="52">2</E> </ENT> </ROW> <ROW> <PRTPAGE P="81"/> <ENT I="01">P081</ENT> <ENT>55-63-0</ENT> <ENT>Nitroglycerine (R)</ENT> </ROW> <ROW> <ENT I="01">P081</ENT> <ENT>55-63-0</ENT> <ENT>1,2,3-Propanetriol, trinitrate (R)</ENT> </ROW> <ROW> <ENT I="01">P082</ENT> <ENT>62-75-9</ENT> <ENT>Methanamine, -methyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">P082</ENT> <ENT>62-75-9</ENT> <ENT>N-Nitrosodimethylamine</ENT> </ROW> <ROW> <ENT I="01">P084</ENT> <ENT>4549-40-0</ENT> <ENT>N-Nitrosomethylvinylamine</ENT> </ROW> <ROW> <ENT I="01">P084</ENT> <ENT>4549-40-0</ENT> <ENT>Vinylamine, -methyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">P085</ENT> <ENT>152-16-9</ENT> <ENT>Diphosphoramide, octamethyl-</ENT> </ROW> <ROW> <ENT I="01">P085</ENT> <ENT>152-16-9</ENT> <ENT>Octamethylpyrophosphoramide</ENT> </ROW> <ROW> <ENT I="01">P087</ENT> <ENT>20816-12-0</ENT> <ENT>Osmium oxide OsO<E T="52">4</E>, (T-4)-</ENT> </ROW> <ROW> <ENT I="01">P087</ENT> <ENT>20816-12-0</ENT> <ENT>Osmium tetroxide</ENT> </ROW> <ROW> <ENT I="01">P088</ENT> <ENT>145-73-3</ENT> <ENT>Endothall</ENT> </ROW> <ROW> <ENT I="01">P088</ENT> <ENT>145-73-3</ENT> <ENT>7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid</ENT> </ROW> <ROW> <ENT I="01">P089</ENT> <ENT>56-38-2</ENT> <ENT>Parathion</ENT> </ROW> <ROW> <ENT I="01">P089</ENT> <ENT>56-38-2</ENT> <ENT>Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) ester</ENT> </ROW> <ROW> <ENT I="01">P092</ENT> <ENT>62-38-4</ENT> <ENT>Mercury, (acetato-O)phenyl-</ENT> </ROW> <ROW> <ENT I="01">P092</ENT> <ENT>62-38-4</ENT> <ENT>Phenylmercury acetate</ENT> </ROW> <ROW> <ENT I="01">P093</ENT> <ENT>103-85-5</ENT> <ENT>Phenylthiourea</ENT> </ROW> <ROW> <ENT I="01">P093</ENT> <ENT>103-85-5</ENT> <ENT>Thiourea, phenyl-</ENT> </ROW> <ROW> <ENT I="01">P094</ENT> <ENT>298-02-2</ENT> <ENT>Phorate</ENT> </ROW> <ROW> <ENT I="01">P094</ENT> <ENT>298-02-2</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-[(ethylthio)methyl] ester</ENT> </ROW> <ROW> <ENT I="01">P095</ENT> <ENT>75-44-5</ENT> <ENT>Carbonic dichloride</ENT> </ROW> <ROW> <ENT I="01">P095</ENT> <ENT>75-44-5</ENT> <ENT>Phosgene</ENT> </ROW> <ROW> <ENT I="01">P096</ENT> <ENT>7803-51-2</ENT> <ENT>Hydrogen phosphide</ENT> </ROW> <ROW> <ENT I="01">P096</ENT> <ENT>7803-51-2</ENT> <ENT>Phosphine</ENT> </ROW> <ROW> <ENT I="01">P097</ENT> <ENT>52-85-7</ENT> <ENT>Famphur</ENT> </ROW> <ROW> <ENT I="01">P097</ENT> <ENT>52-85-7</ENT> <ENT>Phosphorothioic acid, O-[4-[(dimethylamino)sulfonyl]phenyl] O,O-dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">P098</ENT> <ENT>151-50-8</ENT> <ENT>Potassium cyanide</ENT> </ROW> <ROW> <ENT I="01">P098</ENT> <ENT>151-50-8</ENT> <ENT>Potassium cyanide K(CN)</ENT> </ROW> <ROW> <ENT I="01">P099</ENT> <ENT>506-61-6</ENT> <ENT>Argentate(1-), bis(cyano-C)-, potassium</ENT> </ROW> <ROW> <ENT I="01">P099</ENT> <ENT>506-61-6</ENT> <ENT>Potassium silver cyanide</ENT> </ROW> <ROW> <ENT I="01">P101</ENT> <ENT>107-12-0</ENT> <ENT>Ethyl cyanide</ENT> </ROW> <ROW> <ENT I="01">P101</ENT> <ENT>107-12-0</ENT> <ENT>Propanenitrile</ENT> </ROW> <ROW> <ENT I="01">P102</ENT> <ENT>107-19-7</ENT> <ENT>Propargyl alcohol</ENT> </ROW> <ROW> <ENT I="01">P102</ENT> <ENT>107-19-7</ENT> <ENT>2-Propyn-1-ol</ENT> </ROW> <ROW> <ENT I="01">P103</ENT> <ENT>630-10-4</ENT> <ENT>Selenourea</ENT> </ROW> <ROW> <ENT I="01">P104</ENT> <ENT>506-64-9</ENT> <ENT>Silver cyanide</ENT> </ROW> <ROW> <ENT I="01">P104</ENT> <ENT>506-64-9</ENT> <ENT>Silver cyanide Ag(CN)</ENT> </ROW> <ROW> <ENT I="01">P105</ENT> <ENT>26628-22-8</ENT> <ENT>Sodium azide</ENT> </ROW> <ROW> <ENT I="01">P106</ENT> <ENT>143-33-9</ENT> <ENT>Sodium cyanide</ENT> </ROW> <ROW> <ENT I="01">P106</ENT> <ENT>143-33-9</ENT> <ENT>Sodium cyanide Na(CN)</ENT> </ROW> <ROW> <ENT I="01">P108</ENT> <ENT> <SU>1</SU> 157-24-9</ENT> <ENT>Strychnidin-10-one, & salts</ENT> </ROW> <ROW> <ENT I="01">P108</ENT> <ENT> <SU>1</SU> 157-24-9</ENT> <ENT>Strychnine, & salts</ENT> </ROW> <ROW> <ENT I="01">P109</ENT> <ENT>3689-24-5</ENT> <ENT>Tetraethyldithiopyrophosphate</ENT> </ROW> <ROW> <ENT I="01">P109</ENT> <ENT>3689-24-5</ENT> <ENT>Thiodiphosphoric acid, tetraethyl ester</ENT> </ROW> <ROW> <ENT I="01">P110</ENT> <ENT>78-00-2</ENT> <ENT>Plumbane, tetraethyl-</ENT> </ROW> <ROW> <ENT I="01">P110</ENT> <ENT>78-00-2</ENT> <ENT>Tetraethyl lead</ENT> </ROW> <ROW> <ENT I="01">P111</ENT> <ENT>107-49-3</ENT> <ENT>Diphosphoric acid, tetraethyl ester</ENT> </ROW> <ROW> <ENT I="01">P111</ENT> <ENT>107-49-3</ENT> <ENT>Tetraethyl pyrophosphate</ENT> </ROW> <ROW> <ENT I="01">P112</ENT> <ENT>509-14-8</ENT> <ENT>Methane, tetranitro-(R)</ENT> </ROW> <ROW> <ENT I="01">P112</ENT> <ENT>509-14-8</ENT> <ENT>Tetranitromethane (R)</ENT> </ROW> <ROW> <ENT I="01">P113</ENT> <ENT>1314-32-5</ENT> <ENT>Thallic oxide</ENT> </ROW> <ROW> <ENT I="01">P113</ENT> <ENT>1314-32-5</ENT> <ENT>Thallium oxide Tl<E T="52">2</E> O<E T="52">3</E> </ENT> </ROW> <ROW> <ENT I="01">P114</ENT> <ENT>12039-52-0</ENT> <ENT>Selenious acid, dithallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">P114</ENT> <ENT>12039-52-0</ENT> <ENT>Tetraethyldithiopyrophosphate</ENT> </ROW> <ROW> <ENT I="01">P115</ENT> <ENT>7446-18-6</ENT> <ENT>Thiodiphosphoric acid, tetraethyl ester</ENT> </ROW> <ROW> <ENT I="01">P115</ENT> <ENT>7446-18-6</ENT> <ENT>Plumbane, tetraethyl-</ENT> </ROW> <ROW> <ENT I="01">P116</ENT> <ENT>79-19-6</ENT> <ENT>Tetraethyl lead</ENT> </ROW> <ROW> <ENT I="01">P116</ENT> <ENT>79-19-6</ENT> <ENT>Thiosemicarbazide</ENT> </ROW> <ROW> <ENT I="01">P118</ENT> <ENT>75-70-7</ENT> <ENT>Methanethiol, trichloro-</ENT> </ROW> <ROW> <ENT I="01">P118</ENT> <ENT>75-70-7</ENT> <ENT>Trichloromethanethiol</ENT> </ROW> <ROW> <ENT I="01">P119</ENT> <ENT>7803-55-6</ENT> <ENT>Ammonium vanadate</ENT> </ROW> <ROW> <ENT I="01">P119</ENT> <ENT>7803-55-6</ENT> <ENT>Vanadic acid, ammonium salt</ENT> </ROW> <ROW> <ENT I="01">P120</ENT> <ENT>1314-62-1</ENT> <ENT>Vanadium oxide V<E T="52">2</E>O<E T="52">5</E> </ENT> </ROW> <ROW> <ENT I="01">P120</ENT> <ENT>1314-62-1</ENT> <ENT>Vanadium pentoxide</ENT> </ROW> <ROW> <ENT I="01">P121</ENT> <ENT>557-21-1</ENT> <ENT>Zinc cyanide</ENT> </ROW> <ROW> <ENT I="01">P121</ENT> <ENT>557-21-1</ENT> <ENT>Zinc cyanide Zn(CN)<E T="52">2</E> </ENT> </ROW> <ROW> <ENT I="01">P122</ENT> <ENT>1314-84-7</ENT> <ENT>Zinc phosphide Zn<E T="52">3</E> P<E T="52">2</E>, when present at concentrations greater than 10% (R,T)</ENT> </ROW> <ROW> <ENT I="01">P123</ENT> <ENT>8001-35-2</ENT> <ENT>Toxaphene</ENT> </ROW> <ROW> <ENT I="01">P127</ENT> <ENT>1563-66-2</ENT> <ENT>7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, methylcarbamate.</ENT> </ROW> <ROW> <ENT I="01">P127</ENT> <ENT>1563-66-2</ENT> <ENT>Carbofuran</ENT> </ROW> <ROW> <ENT I="01">P128</ENT> <ENT>315-8-4</ENT> <ENT>Mexacarbate</ENT> </ROW> <ROW> <ENT I="01">P128</ENT> <ENT>315-18-4</ENT> <ENT>Phenol, 4-(dimethylamino)-3,5-dimethyl-, methylcarbamate (ester)</ENT> </ROW> <ROW> <PRTPAGE P="82"/> <ENT I="01">P185</ENT> <ENT>26419-73-8</ENT> <ENT>1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-, O-[(methylamino)-carbonyl]oxime.</ENT> </ROW> <ROW> <ENT I="01">P185</ENT> <ENT>26419-73-8</ENT> <ENT>Tirpate</ENT> </ROW> <ROW> <ENT I="01">P188</ENT> <ENT>57-64-7</ENT> <ENT>Benzoic acid, 2-hydroxy-, compd. with (3aS-cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methylcarbamate ester (1:1)</ENT> </ROW> <ROW> <ENT I="01">P188</ENT> <ENT>57-64-7</ENT> <ENT>Physostigmine salicylate</ENT> </ROW> <ROW> <ENT I="01">P189</ENT> <ENT>55285-14-8</ENT> <ENT>Carbamic acid, [(dibutylamino)-thio]methyl-, 2,3-dihydro-2,2-dimethyl-7-benzofuranyl ester</ENT> </ROW> <ROW> <ENT I="01">P189</ENT> <ENT>55285-14-8</ENT> <ENT>Carbosulfan</ENT> </ROW> <ROW> <ENT I="01">P190</ENT> <ENT>1129-41-5</ENT> <ENT>Carbamic acid, methyl-, 3-methylphenyl ester</ENT> </ROW> <ROW> <ENT I="01">P190</ENT> <ENT>1129-41-5</ENT> <ENT>Metolcarb</ENT> </ROW> <ROW> <ENT I="01">P191</ENT> <ENT>644-64-4</ENT> <ENT>Carbamic acid, dimethyl-, 1-[(dimethyl-amino)carbonyl]-5-methyl-1H-pyrazol-3-yl ester</ENT> </ROW> <ROW> <ENT I="01">P191</ENT> <ENT>644-64-4</ENT> <ENT>Dimetilan</ENT> </ROW> <ROW> <ENT I="01">P192</ENT> <ENT>119-38-0</ENT> <ENT>Carbamic acid, dimethyl-, 3-methyl-1-(1-methylethyl)-1H-pyrazol-5-yl ester</ENT> </ROW> <ROW> <ENT I="01">P192</ENT> <ENT>119-38-0</ENT> <ENT>Isolan</ENT> </ROW> <ROW> <ENT I="01">P194</ENT> <ENT>23135-22-0</ENT> <ENT>Ethanimidthioic acid, 2-(dimethylamino)-N-[[(methylamino) carbonyl]oxy]-2-oxo-, methyl ester</ENT> </ROW> <ROW> <ENT I="01">P194</ENT> <ENT>23135-22-0</ENT> <ENT>Oxamyl</ENT> </ROW> <ROW> <ENT I="01">P196</ENT> <ENT>15339-36-3</ENT> <ENT>Manganese, bis(dimethylcarbamodithioato-S,S′)-,</ENT> </ROW> <ROW> <ENT I="01">P196</ENT> <ENT>15339-36-3</ENT> <ENT>Manganese dimethyldithiocarbamate</ENT> </ROW> <ROW> <ENT I="01">P197</ENT> <ENT>17702-57-7</ENT> <ENT>Formparanate</ENT> </ROW> <ROW> <ENT I="01">P197</ENT> <ENT>17702-57-7</ENT> <ENT>Methanimidamide, N,N-dimethyl-N′-[2-methyl-4-[[(methylamino)carbonyl]oxy]phenyl]-</ENT> </ROW> <ROW> <ENT I="01">P198</ENT> <ENT>23422-53-9</ENT> <ENT>Formetanate hydrochloride</ENT> </ROW> <ROW> <ENT I="01">P198</ENT> <ENT>23422-53-9</ENT> <ENT>Methanimidamide, N,N-dimethyl-N′-[3-[[(methylamino)-carbonyl]oxy]phenyl]-monohydrochloride</ENT> </ROW> <ROW> <ENT I="01">P199</ENT> <ENT>2032-65-7</ENT> <ENT>Methiocarb</ENT> </ROW> <ROW> <ENT I="01">P199</ENT> <ENT>2032-65-7</ENT> <ENT>Phenol, (3,5-dimethyl-4-(methylthio)-, methylcarbamate</ENT> </ROW> <ROW> <ENT I="01">P201</ENT> <ENT>2631-37-0</ENT> <ENT>Phenol, 3-methyl-5-(1-methylethyl)-, methyl carbamate</ENT> </ROW> <ROW> <ENT I="01">P201</ENT> <ENT>2631-37-0</ENT> <ENT>Promecarb</ENT> </ROW> <ROW> <ENT I="01">P202</ENT> <ENT>64-00-6</ENT> <ENT>m-Cumenyl methylcarbamate</ENT> </ROW> <ROW> <ENT I="01">P202</ENT> <ENT>64-00-6</ENT> <ENT>3-Isopropylphenyl N-methylcarbamate</ENT> </ROW> <ROW> <ENT I="01">P202</ENT> <ENT>64-00-6</ENT> <ENT>Phenol, 3-(1-methylethyl)-, methyl carbamate</ENT> </ROW> <ROW> <ENT I="01">P203</ENT> <ENT>1646-88-4</ENT> <ENT>Aldicarb sulfone</ENT> </ROW> <ROW> <ENT I="01">P203</ENT> <ENT>1646-88-4</ENT> <ENT>Propanal, 2-methyl-2-(methyl-sulfonyl)-, O-[(methylamino)carbonyl] oxime</ENT> </ROW> <ROW> <ENT I="01">P204</ENT> <ENT>57-47-6</ENT> <ENT>Physostigmine</ENT> </ROW> <ROW> <ENT I="01">P204</ENT> <ENT>57-47-6</ENT> <ENT>Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethyl-, methylcarbamate (ester), (3aS-cis)-</ENT> </ROW> <ROW> <ENT I="01">P205</ENT> <ENT>137-30-4</ENT> <ENT>Zinc, bis(dimethylcarbamodithioato-S,S′)-,</ENT> </ROW> <ROW> <ENT I="01">P205</ENT> <ENT>137-30-4</ENT> <ENT>Ziram</ENT> </ROW> <TNOTE> <SU>1</SU> CAS Number given for parent compound only.</TNOTE> </GPOTABLE> <P>(f) The commercial chemical products, manufacturing chemical inter-mediates, or off-specification commercial chemical products referred to in paragraphs (a) through (d) of this section, are identified as toxic wastes (T), unless otherwise designated and are subject to the small quantity generator exclusion defined in § 261.5 (a) and (g). </P> <EXTRACT> <FP>[<E T="03">Comment:</E> For the convenience of the regulated community, the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), R (Reactivity), I (Ignitability) and C (Corrosivity). Absence of a letter indicates that the compound is only listed for toxicity. Wastes are first listed in alphabetical order by substance and then listed again in numerical order by Hazardous Waste Number.]</FP> </EXTRACT> <P>These wastes and their corresponding EPA Hazardous Waste Numbers are:</P> <GPOTABLE CDEF="xls20,11,r150" COLS="3" OPTS="L2,nj,i1"> <BOXHD> <CHED H="1">Hazardous waste No.</CHED> <CHED H="1">Chemical abstracts No.</CHED> <CHED H="1">Substance</CHED> </BOXHD> <ROW> <ENT I="01">U394</ENT> <ENT>30558-43-1</ENT> <ENT>A2213.</ENT> </ROW> <ROW> <ENT I="01">U001</ENT> <ENT>75-07-0</ENT> <ENT>Acetaldehyde (I)</ENT> </ROW> <ROW> <ENT I="01">U034</ENT> <ENT>75-87-6</ENT> <ENT>Acetaldehyde, trichloro-</ENT> </ROW> <ROW> <ENT I="01">U187</ENT> <ENT>62-44-2</ENT> <ENT>Acetamide, N-(4-ethoxyphenyl)-</ENT> </ROW> <ROW> <ENT I="01">U005</ENT> <ENT>53-96-3</ENT> <ENT>Acetamide, N-9H-fluoren-2-yl-</ENT> </ROW> <ROW> <ENT I="01">U240</ENT> <ENT> <SU>1</SU> 94-75-7</ENT> <ENT>Acetic acid, (2,4-dichlorophenoxy)-, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U112</ENT> <ENT>141-78-6</ENT> <ENT>Acetic acid ethyl ester (I)</ENT> </ROW> <ROW> <ENT I="01">U144</ENT> <ENT>301-04-2</ENT> <ENT>Acetic acid, lead(2+) salt</ENT> </ROW> <ROW> <ENT I="01">U214</ENT> <ENT>563-68-8</ENT> <ENT>Acetic acid, thallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">see F027</ENT> <ENT>93-76-5</ENT> <ENT>Acetic acid, (2,4,5-trichlorophenoxy)-</ENT> </ROW> <ROW> <ENT I="01">U002</ENT> <ENT>67-64-1</ENT> <ENT>Acetone (I)</ENT> </ROW> <ROW> <ENT I="01">U003</ENT> <ENT>75-05-8</ENT> <ENT>Acetonitrile (I,T)</ENT> </ROW> <ROW> <PRTPAGE P="83"/> <ENT I="01">U004</ENT> <ENT>98-86-2</ENT> <ENT>Acetophenone</ENT> </ROW> <ROW> <ENT I="01">U005</ENT> <ENT>53-96-3</ENT> <ENT>2-Acetylaminofluorene</ENT> </ROW> <ROW> <ENT I="01">U006</ENT> <ENT>75-36-5</ENT> <ENT>Acetyl chloride (C,R,T)</ENT> </ROW> <ROW> <ENT I="01">U007</ENT> <ENT>79-06-1</ENT> <ENT>Acrylamide</ENT> </ROW> <ROW> <ENT I="01">U008</ENT> <ENT>79-10-7</ENT> <ENT>Acrylic acid (I)</ENT> </ROW> <ROW> <ENT I="01">U009</ENT> <ENT>107-13-1</ENT> <ENT>Acrylonitrile</ENT> </ROW> <ROW> <ENT I="01">U011</ENT> <ENT>61-82-5</ENT> <ENT>Amitrole</ENT> </ROW> <ROW> <ENT I="01">U012</ENT> <ENT>62-53-3</ENT> <ENT>Aniline (I,T)</ENT> </ROW> <ROW> <ENT I="01">U136</ENT> <ENT>75-60-5</ENT> <ENT>Arsinic acid, dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U014</ENT> <ENT>492-80-8</ENT> <ENT>Auramine</ENT> </ROW> <ROW> <ENT I="01">U015</ENT> <ENT>115-02-6</ENT> <ENT>Azaserine</ENT> </ROW> <ROW> <ENT I="01">U010</ENT> <ENT>50-07-7</ENT> <ENT>Azirino[2′,3′:3,4]pyrrolo[1,2-a]indole-4,7-dione, 6-amino-8-[[(aminocarbonyl)oxy]methyl]-1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5-methyl-, [1aS-(1aalpha, 8beta,8aalpha,8balpha)]-</ENT> </ROW> <ROW> <ENT I="01">U280</ENT> <ENT>101-27-9</ENT> <ENT>Barban.</ENT> </ROW> <ROW> <ENT I="01">U278</ENT> <ENT>22781-23-3</ENT> <ENT>Bendiocarb.</ENT> </ROW> <ROW> <ENT I="01">U364</ENT> <ENT>22961-82-6</ENT> <ENT>Bendiocarb phenol.</ENT> </ROW> <ROW> <ENT I="01">U271</ENT> <ENT>17804-35-2</ENT> <ENT>Benomyl.</ENT> </ROW> <ROW> <ENT I="01">U157</ENT> <ENT>56-49-5</ENT> <ENT>Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-</ENT> </ROW> <ROW> <ENT I="01">U016</ENT> <ENT>225-51-4</ENT> <ENT>Benz[c]acridine</ENT> </ROW> <ROW> <ENT I="01">U017</ENT> <ENT>98-87-3</ENT> <ENT>Benzal chloride</ENT> </ROW> <ROW> <ENT I="01">U192</ENT> <ENT>23950-58-5</ENT> <ENT>Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)-</ENT> </ROW> <ROW> <ENT I="01">U018</ENT> <ENT>56-55-3</ENT> <ENT>Benz[a]anthracene</ENT> </ROW> <ROW> <ENT I="01">U094</ENT> <ENT>57-97-6</ENT> <ENT>Benz[a]anthracene, 7,12-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U012</ENT> <ENT>62-53-3</ENT> <ENT>Benzenamine (I,T)</ENT> </ROW> <ROW> <ENT I="01">U014</ENT> <ENT>492-80-8</ENT> <ENT>Benzenamine, 4,4′-carbonimidoylbis[N,N-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U049</ENT> <ENT>3165-93-3</ENT> <ENT>Benzenamine, 4-chloro-2-methyl-, hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U093</ENT> <ENT>60-11-7</ENT> <ENT>Benzenamine, N,N-dimethyl-4-(phenylazo)-</ENT> </ROW> <ROW> <ENT I="01">U328</ENT> <ENT>95-53-4</ENT> <ENT>Benzenamine, 2-methyl-</ENT> </ROW> <ROW> <ENT I="01">U353</ENT> <ENT>106-49-0</ENT> <ENT>Benzenamine, 4-methyl-</ENT> </ROW> <ROW> <ENT I="01">U158</ENT> <ENT>101-14-4</ENT> <ENT>Benzenamine, 4,4′-methylenebis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U222</ENT> <ENT>636-21-5</ENT> <ENT>Benzenamine, 2-methyl-, hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U181</ENT> <ENT>99-55-8</ENT> <ENT>Benzenamine, 2-methyl-5-nitro-</ENT> </ROW> <ROW> <ENT I="01">U019</ENT> <ENT>71-43-2</ENT> <ENT>Benzene (I,T)</ENT> </ROW> <ROW> <ENT I="01">U038</ENT> <ENT>510-15-6</ENT> <ENT>Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)-alpha-hydroxy-, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U030</ENT> <ENT>101-55-3</ENT> <ENT>Benzene, 1-bromo-4-phenoxy-</ENT> </ROW> <ROW> <ENT I="01">U035</ENT> <ENT>305-03-3</ENT> <ENT>Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-</ENT> </ROW> <ROW> <ENT I="01">U037</ENT> <ENT>108-90-7</ENT> <ENT>Benzene, chloro-</ENT> </ROW> <ROW> <ENT I="01">U221</ENT> <ENT>25376-45-8</ENT> <ENT>Benzenediamine, ar-methyl-</ENT> </ROW> <ROW> <ENT I="01">U028</ENT> <ENT>117-81-7</ENT> <ENT>1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester</ENT> </ROW> <ROW> <ENT I="01">U069</ENT> <ENT>84-74-2</ENT> <ENT>1,2-Benzenedicarboxylic acid, dibutyl ester</ENT> </ROW> <ROW> <ENT I="01">U088</ENT> <ENT>84-66-2</ENT> <ENT>1,2-Benzenedicarboxylic acid, diethyl ester</ENT> </ROW> <ROW> <ENT I="01">U102</ENT> <ENT>131-11-3</ENT> <ENT>1,2-Benzenedicarboxylic acid, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U107</ENT> <ENT>117-84-0</ENT> <ENT>1,2-Benzenedicarboxylic acid, dioctyl ester</ENT> </ROW> <ROW> <ENT I="01">U070</ENT> <ENT>95-50-1</ENT> <ENT>Benzene, 1,2-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U071</ENT> <ENT>541-73-1</ENT> <ENT>Benzene, 1,3-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U072</ENT> <ENT>106-46-7</ENT> <ENT>Benzene, 1,4-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U060</ENT> <ENT>72-54-8</ENT> <ENT>Benzene, 1,1′-(2,2-dichloroethylidene)bis[4-chloro-</ENT> </ROW> <ROW> <ENT I="01">U017</ENT> <ENT>98-87-3</ENT> <ENT>Benzene, (dichloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">U223</ENT> <ENT>26471-62-5</ENT> <ENT>Benzene, 1,3-diisocyanatomethyl- (R,T)</ENT> </ROW> <ROW> <ENT I="01">U239</ENT> <ENT>1330-20-7</ENT> <ENT>Benzene, dimethyl- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U201</ENT> <ENT>108-46-3</ENT> <ENT>1,3-Benzenediol</ENT> </ROW> <ROW> <ENT I="01">U127</ENT> <ENT>118-74-1</ENT> <ENT>Benzene, hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U056</ENT> <ENT>110-82-7</ENT> <ENT>Benzene, hexahydro- (I)</ENT> </ROW> <ROW> <ENT I="01">U220</ENT> <ENT>108-88-3</ENT> <ENT>Benzene, methyl-</ENT> </ROW> <ROW> <ENT I="01">U105</ENT> <ENT>121-14-2</ENT> <ENT>Benzene, 1-methyl-2,4-dinitro-</ENT> </ROW> <ROW> <ENT I="01">U106</ENT> <ENT>606-20-2</ENT> <ENT>Benzene, 2-methyl-1,3-dinitro-</ENT> </ROW> <ROW> <ENT I="01">U055</ENT> <ENT>98-82-8</ENT> <ENT>Benzene, (1-methylethyl)- (I)</ENT> </ROW> <ROW> <ENT I="01">U169</ENT> <ENT>98-95-3</ENT> <ENT>Benzene, nitro-</ENT> </ROW> <ROW> <ENT I="01">U183</ENT> <ENT>608-93-5</ENT> <ENT>Benzene, pentachloro-</ENT> </ROW> <ROW> <ENT I="01">U185</ENT> <ENT>82-68-8</ENT> <ENT>Benzene, pentachloronitro-</ENT> </ROW> <ROW> <ENT I="01">U020</ENT> <ENT>98-09-9</ENT> <ENT>Benzenesulfonic acid chloride (C,R)</ENT> </ROW> <ROW> <ENT I="01">U020</ENT> <ENT>98-09-9</ENT> <ENT>Benzenesulfonyl chloride (C,R)</ENT> </ROW> <ROW> <ENT I="01">U207</ENT> <ENT>95-94-3</ENT> <ENT>Benzene, 1,2,4,5-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U061</ENT> <ENT>50-29-3</ENT> <ENT>Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4-chloro-</ENT> </ROW> <ROW> <ENT I="01">U247</ENT> <ENT>72-43-5</ENT> <ENT>Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4- methoxy-</ENT> </ROW> <ROW> <ENT I="01">U023</ENT> <ENT>98-07-7</ENT> <ENT>Benzene, (trichloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">U234</ENT> <ENT>99-35-4</ENT> <ENT>Benzene, 1,3,5-trinitro-</ENT> </ROW> <ROW> <ENT I="01">U021</ENT> <ENT>92-87-5</ENT> <ENT>Benzidine</ENT> </ROW> <ROW> <ENT I="01">U202</ENT> <ENT> <SU>1</SU> 81-07-2</ENT> <ENT>1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide, & salts</ENT> </ROW> <ROW> <ENT I="01">U278</ENT> <ENT>22781-23-3</ENT> <ENT>1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl carbamate.</ENT> </ROW> <ROW> <ENT I="01">U364</ENT> <ENT>22961-82-6</ENT> <ENT>1,3-Benzodioxol-4-ol, 2,2-dimethyl-,</ENT> </ROW> <ROW> <ENT I="01">U203</ENT> <ENT>94-59-7</ENT> <ENT>1,3-Benzodioxole, 5-(2-propenyl)-</ENT> </ROW> <ROW> <PRTPAGE P="84"/> <ENT I="01">U141</ENT> <ENT>120-58-1</ENT> <ENT>1,3-Benzodioxole, 5-(1-propenyl)-</ENT> </ROW> <ROW> <ENT I="01">U367</ENT> <ENT>1563-38-8</ENT> <ENT>7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U090</ENT> <ENT>94-58-6</ENT> <ENT>1,3-Benzodioxole, 5-propyl-</ENT> </ROW> <ROW> <ENT I="01">U064</ENT> <ENT>189-55-9</ENT> <ENT>Benzo[rst]pentaphene</ENT> </ROW> <ROW> <ENT I="01">U248</ENT> <ENT> <SU>1</SU>81-81-2</ENT> <ENT>2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenyl-butyl)-, & salts, when present at concentrations of 0.3% or less</ENT> </ROW> <ROW> <ENT I="01">U022</ENT> <ENT>50-32-8</ENT> <ENT>Benzo[a]pyrene</ENT> </ROW> <ROW> <ENT I="01">U197</ENT> <ENT>106-51-4</ENT> <ENT>p-Benzoquinone</ENT> </ROW> <ROW> <ENT I="01">U023</ENT> <ENT>98-07-7</ENT> <ENT>Benzotrichloride (C,R,T)</ENT> </ROW> <ROW> <ENT I="01">U085</ENT> <ENT>1464-53-5</ENT> <ENT>2,2′-Bioxirane</ENT> </ROW> <ROW> <ENT I="01">U021</ENT> <ENT>92-87-5</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine</ENT> </ROW> <ROW> <ENT I="01">U073</ENT> <ENT>91-94-1</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U091</ENT> <ENT>119-90-4</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethoxy-</ENT> </ROW> <ROW> <ENT I="01">U095</ENT> <ENT>119-93-7</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U225</ENT> <ENT>75-25-2</ENT> <ENT>Bromoform</ENT> </ROW> <ROW> <ENT I="01">U030</ENT> <ENT>101-55-3</ENT> <ENT>4-Bromophenyl phenyl ether</ENT> </ROW> <ROW> <ENT I="01">U128</ENT> <ENT>87-68-3</ENT> <ENT>1,3-Butadiene, 1,1,2,3,4,4-hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U172</ENT> <ENT>924-16-3</ENT> <ENT>1-Butanamine, N-butyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U031</ENT> <ENT>71-36-3</ENT> <ENT>1-Butanol (I)</ENT> </ROW> <ROW> <ENT I="01">U159</ENT> <ENT>78-93-3</ENT> <ENT>2-Butanone (I,T)</ENT> </ROW> <ROW> <ENT I="01">U160</ENT> <ENT>1338-23-4</ENT> <ENT>2-Butanone, peroxide (R,T)</ENT> </ROW> <ROW> <ENT I="01">U053</ENT> <ENT>4170-30-3</ENT> <ENT>2-Butenal</ENT> </ROW> <ROW> <ENT I="01">U074</ENT> <ENT>764-41-0</ENT> <ENT>2-Butene, 1,4-dichloro- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U143</ENT> <ENT>303-34-4</ENT> <ENT>2-Butenoic acid, 2-methyl-, 7-[[2,3-dihydroxy-<LI>2-(1-methoxyethyl)-3-methyl-1-oxobutoxy]methyl]-</LI> <LI>2,3,5,7a-tetrahydro-1H-pyrrolizin-1-yl ester,</LI> <LI>[1S-[1alpha(Z),7(2S*,3R*),7aalpha]]-</LI> </ENT> </ROW> <ROW> <ENT I="01">U031</ENT> <ENT>71-36-3</ENT> <ENT>n-Butyl alcohol (I)</ENT> </ROW> <ROW> <ENT I="01">U136</ENT> <ENT>75-60-5</ENT> <ENT>Cacodylic acid</ENT> </ROW> <ROW> <ENT I="01">U032</ENT> <ENT>13765-19-0</ENT> <ENT>Calcium chromate</ENT> </ROW> <ROW> <ENT I="01">U372</ENT> <ENT>10605-21-7</ENT> <ENT>Carbamic acid, 1H-benzimidazol-2-yl, methyl ester.</ENT> </ROW> <ROW> <ENT I="01">U271</ENT> <ENT>17804-35-2</ENT> <ENT>Carbamic acid, [1-[(butylamino)carbonyl]-1H-benzimidazol-2-yl]-, methyl ester.</ENT> </ROW> <ROW> <ENT I="01">U280</ENT> <ENT>101-27-9</ENT> <ENT>Carbamic acid, (3-chlorophenyl)-, 4-chloro-2-butynyl ester.</ENT> </ROW> <ROW> <ENT I="01">U238</ENT> <ENT>51-79-6</ENT> <ENT>Carbamic acid, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U178</ENT> <ENT>615-53-2</ENT> <ENT>Carbamic acid, methylnitroso-, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U373</ENT> <ENT>122-42-9</ENT> <ENT>Carbamic acid, phenyl-, 1-methylethyl ester.</ENT> </ROW> <ROW> <ENT I="01">U409</ENT> <ENT>23564-05-8</ENT> <ENT>Carbamic acid, [1,2-phenylenebis (iminocarbonothioyl)]bis-, dimethyl ester.</ENT> </ROW> <ROW> <ENT I="01">U097</ENT> <ENT>79-44-7</ENT> <ENT>Carbamic chloride, dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U389</ENT> <ENT>2303-17-5</ENT> <ENT>Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3-trichloro-2-propenyl) ester.</ENT> </ROW> <ROW> <ENT I="01">U387</ENT> <ENT>52888-80-9</ENT> <ENT>Carbamothioic acid, dipropyl-, S-(phenylmethyl) ester.</ENT> </ROW> <ROW> <ENT I="01">U114</ENT> <ENT> <SU>1</SU> 111-54-6</ENT> <ENT>Carbamodithioic acid, 1,2-ethanediylbis-,<LI>salts & esters</LI> </ENT> </ROW> <ROW> <ENT I="01">U062</ENT> <ENT>2303-16-4</ENT> <ENT>Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-di-chloro-2-propenyl) ester</ENT> </ROW> <ROW> <ENT I="01">U279</ENT> <ENT>63-25-2</ENT> <ENT>Carbaryl.</ENT> </ROW> <ROW> <ENT I="01">U372</ENT> <ENT>10605-21-7</ENT> <ENT>Carbendazim.</ENT> </ROW> <ROW> <ENT I="01">U367</ENT> <ENT>1563-38-8</ENT> <ENT>Carbofuran phenol.</ENT> </ROW> <ROW> <ENT I="01">U215</ENT> <ENT>6533-73-9</ENT> <ENT>Carbonic acid, dithallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">U033</ENT> <ENT>353-50-4</ENT> <ENT>Carbonic difluoride</ENT> </ROW> <ROW> <ENT I="01">U156</ENT> <ENT>79-22-1</ENT> <ENT>Carbonochloridic acid, methyl ester (I,T)</ENT> </ROW> <ROW> <ENT I="01">U033</ENT> <ENT>353-50-4</ENT> <ENT>Carbon oxyfluoride (R,T)</ENT> </ROW> <ROW> <ENT I="01">U211</ENT> <ENT>56-23-5</ENT> <ENT>Carbon tetrachloride</ENT> </ROW> <ROW> <ENT I="01">U034</ENT> <ENT>75-87-6</ENT> <ENT>Chloral</ENT> </ROW> <ROW> <ENT I="01">U035</ENT> <ENT>305-03-3</ENT> <ENT>Chlorambucil</ENT> </ROW> <ROW> <ENT I="01">U036</ENT> <ENT>57-74-9</ENT> <ENT>Chlordane, alpha & gamma isomers</ENT> </ROW> <ROW> <ENT I="01">U026</ENT> <ENT>494-03-1</ENT> <ENT>Chlornaphazin</ENT> </ROW> <ROW> <ENT I="01">U037</ENT> <ENT>108-90-7</ENT> <ENT>Chlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U038</ENT> <ENT>510-15-6</ENT> <ENT>Chlorobenzilate</ENT> </ROW> <ROW> <ENT I="01">U039</ENT> <ENT>59-50-7</ENT> <ENT>p-Chloro-m-cresol</ENT> </ROW> <ROW> <ENT I="01">U042</ENT> <ENT>110-75-8</ENT> <ENT>2-Chloroethyl vinyl ether</ENT> </ROW> <ROW> <ENT I="01">U044</ENT> <ENT>67-66-3</ENT> <ENT>Chloroform</ENT> </ROW> <ROW> <ENT I="01">U046</ENT> <ENT>107-30-2</ENT> <ENT>Chloromethyl methyl ether</ENT> </ROW> <ROW> <ENT I="01">U047</ENT> <ENT>91-58-7</ENT> <ENT>beta-Chloronaphthalene</ENT> </ROW> <ROW> <ENT I="01">U048</ENT> <ENT>95-57-8</ENT> <ENT>o-Chlorophenol</ENT> </ROW> <ROW> <ENT I="01">U049</ENT> <ENT>3165-93-3</ENT> <ENT>4-Chloro-o-toluidine, hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U032</ENT> <ENT>13765-19-0</ENT> <ENT>Chromic acid H<E T="52">2</E> CrO<E T="52">4</E>, calcium salt</ENT> </ROW> <ROW> <ENT I="01">U050</ENT> <ENT>218-01-9</ENT> <ENT>Chrysene</ENT> </ROW> <ROW> <ENT I="01">U051</ENT> <ENT/> <ENT>Creosote</ENT> </ROW> <ROW> <ENT I="01">U052</ENT> <ENT>1319-77-3</ENT> <ENT>Cresol (Cresylic acid)</ENT> </ROW> <ROW> <ENT I="01">U053</ENT> <ENT>4170-30-3</ENT> <ENT>Crotonaldehyde</ENT> </ROW> <ROW> <ENT I="01">U055</ENT> <ENT>98-82-8</ENT> <ENT>Cumene (I)</ENT> </ROW> <ROW> <ENT I="01">U246</ENT> <ENT>506-68-3</ENT> <ENT>Cyanogen bromide (CN)Br</ENT> </ROW> <ROW> <ENT I="01">U197</ENT> <ENT>106-51-4</ENT> <ENT>2,5-Cyclohexadiene-1,4-dione</ENT> </ROW> <ROW> <PRTPAGE P="85"/> <ENT I="01">U056</ENT> <ENT>110-82-7</ENT> <ENT>Cyclohexane (I)</ENT> </ROW> <ROW> <ENT I="01">U129</ENT> <ENT>58-89-9</ENT> <ENT>Cyclohexane, 1,2,3,4,5,6-hexachloro-,<LI>(1alpha,2alpha,3beta,4alpha,5alpha,6beta)-</LI> </ENT> </ROW> <ROW> <ENT I="01">U057</ENT> <ENT>108-94-1</ENT> <ENT>Cyclohexanone (I)</ENT> </ROW> <ROW> <ENT I="01">U130</ENT> <ENT>77-47-4</ENT> <ENT>1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U058</ENT> <ENT>50-18-0</ENT> <ENT>Cyclophosphamide</ENT> </ROW> <ROW> <ENT I="01">U240</ENT> <ENT> <SU>1</SU> 94-75-7</ENT> <ENT>2,4-D, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U059</ENT> <ENT>20830-81-3</ENT> <ENT>Daunomycin</ENT> </ROW> <ROW> <ENT I="01">U060</ENT> <ENT>72-54-8</ENT> <ENT>DDD</ENT> </ROW> <ROW> <ENT I="01">U061</ENT> <ENT>50-29-3</ENT> <ENT>DDT</ENT> </ROW> <ROW> <ENT I="01">U062</ENT> <ENT>2303-16-4</ENT> <ENT>Diallate</ENT> </ROW> <ROW> <ENT I="01">U063</ENT> <ENT>53-70-3</ENT> <ENT>Dibenz[a,h]anthracene</ENT> </ROW> <ROW> <ENT I="01">U064</ENT> <ENT>189-55-9</ENT> <ENT>Dibenzo[a,i]pyrene</ENT> </ROW> <ROW> <ENT I="01">U066</ENT> <ENT>96-12-8</ENT> <ENT>1,2-Dibromo-3-chloropropane</ENT> </ROW> <ROW> <ENT I="01">U069</ENT> <ENT>84-74-2</ENT> <ENT>Dibutyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U070</ENT> <ENT>95-50-1</ENT> <ENT>o-Dichlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U071</ENT> <ENT>541-73-1</ENT> <ENT>m-Dichlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U072</ENT> <ENT>106-46-7</ENT> <ENT>p-Dichlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U073</ENT> <ENT>91-94-1</ENT> <ENT>3,3′-Dichlorobenzidine</ENT> </ROW> <ROW> <ENT I="01">U074</ENT> <ENT>764-41-0</ENT> <ENT>1,4-Dichloro-2-butene (I,T)</ENT> </ROW> <ROW> <ENT I="01">U075</ENT> <ENT>75-71-8</ENT> <ENT>Dichlorodifluoromethane</ENT> </ROW> <ROW> <ENT I="01">U078</ENT> <ENT>75-35-4</ENT> <ENT>1,1-Dichloroethylene</ENT> </ROW> <ROW> <ENT I="01">U079</ENT> <ENT>156-60-5</ENT> <ENT>1,2-Dichloroethylene</ENT> </ROW> <ROW> <ENT I="01">U025</ENT> <ENT>111-44-4</ENT> <ENT>Dichloroethyl ether</ENT> </ROW> <ROW> <ENT I="01">U027</ENT> <ENT>108-60-1</ENT> <ENT>Dichloroisopropyl ether</ENT> </ROW> <ROW> <ENT I="01">U024</ENT> <ENT>111-91-1</ENT> <ENT>Dichloromethoxy ethane</ENT> </ROW> <ROW> <ENT I="01">U081</ENT> <ENT>120-83-2</ENT> <ENT>2,4-Dichlorophenol</ENT> </ROW> <ROW> <ENT I="01">U082</ENT> <ENT>87-65-0</ENT> <ENT>2,6-Dichlorophenol</ENT> </ROW> <ROW> <ENT I="01">U084</ENT> <ENT>542-75-6</ENT> <ENT>1,3-Dichloropropene</ENT> </ROW> <ROW> <ENT I="01">U085</ENT> <ENT>1464-53-5</ENT> <ENT>1,2:3,4-Diepoxybutane (I,T)</ENT> </ROW> <ROW> <ENT I="01">U108</ENT> <ENT>123-91-1</ENT> <ENT>1,4-Diethyleneoxide</ENT> </ROW> <ROW> <ENT I="01">U028</ENT> <ENT>117-81-7</ENT> <ENT>Diethylhexyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U395</ENT> <ENT>5952-26-1</ENT> <ENT>Diethylene glycol, dicarbamate.</ENT> </ROW> <ROW> <ENT I="01">U086</ENT> <ENT>1615-80-1</ENT> <ENT>N,N′-Diethylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U087</ENT> <ENT>3288-58-2</ENT> <ENT>O,O-Diethyl S-methyl dithiophosphate</ENT> </ROW> <ROW> <ENT I="01">U088</ENT> <ENT>84-66-2</ENT> <ENT>Diethyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U089</ENT> <ENT>56-53-1</ENT> <ENT>Diethylstilbesterol</ENT> </ROW> <ROW> <ENT I="01">U090</ENT> <ENT>94-58-6</ENT> <ENT>Dihydrosafrole</ENT> </ROW> <ROW> <ENT I="01">U091</ENT> <ENT>119-90-4</ENT> <ENT>3,3′-Dimethoxybenzidine</ENT> </ROW> <ROW> <ENT I="01">U092</ENT> <ENT>124-40-3</ENT> <ENT>Dimethylamine (I)</ENT> </ROW> <ROW> <ENT I="01">U093</ENT> <ENT>60-11-7</ENT> <ENT>p-Dimethylaminoazobenzene</ENT> </ROW> <ROW> <ENT I="01">U094</ENT> <ENT>57-97-6</ENT> <ENT>7,12-Dimethylbenz[a]anthracene</ENT> </ROW> <ROW> <ENT I="01">U095</ENT> <ENT>119-93-7</ENT> <ENT>3,3′-Dimethylbenzidine</ENT> </ROW> <ROW> <ENT I="01">U096</ENT> <ENT>80-15-9</ENT> <ENT>alpha,alpha-Dimethylbenzylhydroperoxide (R)</ENT> </ROW> <ROW> <ENT I="01">U097</ENT> <ENT>79-44-7</ENT> <ENT>Dimethylcarbamoyl chloride</ENT> </ROW> <ROW> <ENT I="01">U098</ENT> <ENT>57-14-7</ENT> <ENT>1,1-Dimethylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U099</ENT> <ENT>540-73-8</ENT> <ENT>1,2-Dimethylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U101</ENT> <ENT>105-67-9</ENT> <ENT>2,4-Dimethylphenol</ENT> </ROW> <ROW> <ENT I="01">U102</ENT> <ENT>131-11-3</ENT> <ENT>Dimethyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U103</ENT> <ENT>77-78-1</ENT> <ENT>Dimethyl sulfate</ENT> </ROW> <ROW> <ENT I="01">U105</ENT> <ENT>121-14-2</ENT> <ENT>2,4-Dinitrotoluene</ENT> </ROW> <ROW> <ENT I="01">U106</ENT> <ENT>606-20-2</ENT> <ENT>2,6-Dinitrotoluene</ENT> </ROW> <ROW> <ENT I="01">U107</ENT> <ENT>117-84-0</ENT> <ENT>Di-n-octyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U108</ENT> <ENT>123-91-1</ENT> <ENT>1,4-Dioxane</ENT> </ROW> <ROW> <ENT I="01">U109</ENT> <ENT>122-66-7</ENT> <ENT>1,2-Diphenylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U110</ENT> <ENT>142-84-7</ENT> <ENT>Dipropylamine (I)</ENT> </ROW> <ROW> <ENT I="01">U111</ENT> <ENT>621-64-7</ENT> <ENT>Di-n-propylnitrosamine</ENT> </ROW> <ROW> <ENT I="01">U041</ENT> <ENT>106-89-8</ENT> <ENT>Epichlorohydrin</ENT> </ROW> <ROW> <ENT I="01">U001</ENT> <ENT>75-07-0</ENT> <ENT>Ethanal (I)</ENT> </ROW> <ROW> <ENT I="01">U404</ENT> <ENT>121-44-8</ENT> <ENT>Ethanamine, N,N-diethyl-</ENT> </ROW> <ROW> <ENT I="01">U174</ENT> <ENT>55-18-5</ENT> <ENT>Ethanamine, N-ethyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U155</ENT> <ENT>91-80-5</ENT> <ENT>1,2-Ethanediamine, N,N-dimethyl-N′-2-pyridinyl-N′-(2-thienylmethyl)-</ENT> </ROW> <ROW> <ENT I="01">U067</ENT> <ENT>106-93-4</ENT> <ENT>Ethane, 1,2-dibromo-</ENT> </ROW> <ROW> <ENT I="01">U076</ENT> <ENT>75-34-3</ENT> <ENT>Ethane, 1,1-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U077</ENT> <ENT>107-06-2</ENT> <ENT>Ethane, 1,2-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U131</ENT> <ENT>67-72-1</ENT> <ENT>Ethane, hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U024</ENT> <ENT>111-91-1</ENT> <ENT>Ethane, 1,1′-[methylenebis(oxy)]bis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U117</ENT> <ENT>60-29-7</ENT> <ENT>Ethane, 1,1′-oxybis-(I)</ENT> </ROW> <ROW> <ENT I="01">U025</ENT> <ENT>111-44-4</ENT> <ENT>Ethane, 1,1′-oxybis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U184</ENT> <ENT>76-01-7</ENT> <ENT>Ethane, pentachloro-</ENT> </ROW> <ROW> <ENT I="01">U208</ENT> <ENT>630-20-6</ENT> <ENT>Ethane, 1,1,1,2-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U209</ENT> <ENT>79-34-5</ENT> <ENT>Ethane, 1,1,2,2-tetrachloro-</ENT> </ROW> <ROW> <PRTPAGE P="86"/> <ENT I="01">U218</ENT> <ENT>62-55-5</ENT> <ENT>Ethanethioamide</ENT> </ROW> <ROW> <ENT I="01">U226</ENT> <ENT>71-55-6</ENT> <ENT>Ethane, 1,1,1-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U227</ENT> <ENT>79-00-5</ENT> <ENT>Ethane, 1,1,2-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U410</ENT> <ENT>59669-26-0</ENT> <ENT>Ethanimidothioic acid, N,N′- [thiobis[(methylimino)carbonyloxy]]bis-, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U394</ENT> <ENT>30558-43-1</ENT> <ENT>Ethanimidothioic acid, 2-(dimethylamino)-N-hydroxy-2-oxo-, methyl ester.</ENT> </ROW> <ROW> <ENT I="01">U359</ENT> <ENT>110-80-5</ENT> <ENT>Ethanol, 2-ethoxy-</ENT> </ROW> <ROW> <ENT I="01">U173</ENT> <ENT>1116-54-7</ENT> <ENT>Ethanol, 2,2′-(nitrosoimino)bis-</ENT> </ROW> <ROW> <ENT I="01">U395</ENT> <ENT>5952-26-1</ENT> <ENT>Ethanol, 2,2′-oxybis-, dicarbamate.</ENT> </ROW> <ROW> <ENT I="01">U004</ENT> <ENT>98-86-2</ENT> <ENT>Ethanone, 1-phenyl-</ENT> </ROW> <ROW> <ENT I="01">U043</ENT> <ENT>75-01-4</ENT> <ENT>Ethene, chloro-</ENT> </ROW> <ROW> <ENT I="01">U042</ENT> <ENT>110-75-8</ENT> <ENT>Ethene, (2-chloroethoxy)-</ENT> </ROW> <ROW> <ENT I="01">U078</ENT> <ENT>75-35-4</ENT> <ENT>Ethene, 1,1-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U079</ENT> <ENT>156-60-5</ENT> <ENT>Ethene, 1,2-dichloro-, (E)-</ENT> </ROW> <ROW> <ENT I="01">U210</ENT> <ENT>127-18-4</ENT> <ENT>Ethene, tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U228</ENT> <ENT>79-01-6</ENT> <ENT>Ethene, trichloro-</ENT> </ROW> <ROW> <ENT I="01">U112</ENT> <ENT>141-78-6</ENT> <ENT>Ethyl acetate (I)</ENT> </ROW> <ROW> <ENT I="01">U113</ENT> <ENT>140-88-5</ENT> <ENT>Ethyl acrylate (I)</ENT> </ROW> <ROW> <ENT I="01">U238</ENT> <ENT>51-79-6</ENT> <ENT>Ethyl carbamate (urethane)</ENT> </ROW> <ROW> <ENT I="01">U117</ENT> <ENT>60-29-7</ENT> <ENT>Ethyl ether (I)</ENT> </ROW> <ROW> <ENT I="01">U114</ENT> <ENT> <SU>1</SU> 111-54-6</ENT> <ENT>Ethylenebisdithiocarbamic acid, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U067</ENT> <ENT>106-93-4</ENT> <ENT>Ethylene dibromide</ENT> </ROW> <ROW> <ENT I="01">U077</ENT> <ENT>107-06-2</ENT> <ENT>Ethylene dichloride</ENT> </ROW> <ROW> <ENT I="01">U359</ENT> <ENT>110-80-5</ENT> <ENT>Ethylene glycol monoethyl ether</ENT> </ROW> <ROW> <ENT I="01">U115</ENT> <ENT>75-21-8</ENT> <ENT>Ethylene oxide (I,T)</ENT> </ROW> <ROW> <ENT I="01">U116</ENT> <ENT>96-45-7</ENT> <ENT>Ethylenethiourea</ENT> </ROW> <ROW> <ENT I="01">U076</ENT> <ENT>75-34-3</ENT> <ENT>Ethylidene dichloride</ENT> </ROW> <ROW> <ENT I="01">U118</ENT> <ENT>97-63-2</ENT> <ENT>Ethyl methacrylate</ENT> </ROW> <ROW> <ENT I="01">U119</ENT> <ENT>62-50-0</ENT> <ENT>Ethyl methanesulfonate</ENT> </ROW> <ROW> <ENT I="01">U120</ENT> <ENT>206-44-0</ENT> <ENT>Fluoranthene</ENT> </ROW> <ROW> <ENT I="01">U122</ENT> <ENT>50-00-0</ENT> <ENT>Formaldehyde</ENT> </ROW> <ROW> <ENT I="01">U123</ENT> <ENT>64-18-6</ENT> <ENT>Formic acid (C,T)</ENT> </ROW> <ROW> <ENT I="01">U124</ENT> <ENT>110-00-9</ENT> <ENT>Furan (I)</ENT> </ROW> <ROW> <ENT I="01">U125</ENT> <ENT>98-01-1</ENT> <ENT>2-Furancarboxaldehyde (I)</ENT> </ROW> <ROW> <ENT I="01">U147</ENT> <ENT>108-31-6</ENT> <ENT>2,5-Furandione</ENT> </ROW> <ROW> <ENT I="01">U213</ENT> <ENT>109-99-9</ENT> <ENT>Furan, tetrahydro-(I)</ENT> </ROW> <ROW> <ENT I="01">U125</ENT> <ENT>98-01-1</ENT> <ENT>Furfural (I)</ENT> </ROW> <ROW> <ENT I="01">U124</ENT> <ENT>110-00-9</ENT> <ENT>Furfuran (I)</ENT> </ROW> <ROW> <ENT I="01">U206</ENT> <ENT>18883-66-4</ENT> <ENT>Glucopyranose, 2-deoxy-2-(3-methyl-3-nitrosoureido)-, D-</ENT> </ROW> <ROW> <ENT I="01">U206</ENT> <ENT>18883-66-4</ENT> <ENT>D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)-<LI>carbonyl]amino]-</LI> </ENT> </ROW> <ROW> <ENT I="01">U126</ENT> <ENT>765-34-4</ENT> <ENT>Glycidylaldehyde</ENT> </ROW> <ROW> <ENT I="01">U163</ENT> <ENT>70-25-7</ENT> <ENT>Guanidine, N-methyl-N′-nitro-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U127</ENT> <ENT>118-74-1</ENT> <ENT>Hexachlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U128</ENT> <ENT>87-68-3</ENT> <ENT>Hexachlorobutadiene</ENT> </ROW> <ROW> <ENT I="01">U130</ENT> <ENT>77-47-4</ENT> <ENT>Hexachlorocyclopentadiene</ENT> </ROW> <ROW> <ENT I="01">U131</ENT> <ENT>67-72-1</ENT> <ENT>Hexachloroethane</ENT> </ROW> <ROW> <ENT I="01">U132</ENT> <ENT>70-30-4</ENT> <ENT>Hexachlorophene</ENT> </ROW> <ROW> <ENT I="01">U243</ENT> <ENT>1888-71-7</ENT> <ENT>Hexachloropropene</ENT> </ROW> <ROW> <ENT I="01">U133</ENT> <ENT>302-01-2</ENT> <ENT>Hydrazine (R,T)</ENT> </ROW> <ROW> <ENT I="01">U086</ENT> <ENT>1615-80-1</ENT> <ENT>Hydrazine, 1,2-diethyl-</ENT> </ROW> <ROW> <ENT I="01">U098</ENT> <ENT>57-14-7</ENT> <ENT>Hydrazine, 1,1-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U099</ENT> <ENT>540-73-8</ENT> <ENT>Hydrazine, 1,2-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U109</ENT> <ENT>122-66-7</ENT> <ENT>Hydrazine, 1,2-diphenyl-</ENT> </ROW> <ROW> <ENT I="01">U134</ENT> <ENT>7664-39-3</ENT> <ENT>Hydrofluoric acid (C,T)</ENT> </ROW> <ROW> <ENT I="01">U134</ENT> <ENT>7664-39-3</ENT> <ENT>Hydrogen fluoride (C,T)</ENT> </ROW> <ROW> <ENT I="01">U135</ENT> <ENT>7783-06-4</ENT> <ENT>Hydrogen sulfide</ENT> </ROW> <ROW> <ENT I="01">U135</ENT> <ENT>7783-06-4</ENT> <ENT>Hydrogen sulfide H<E T="52">2</E> S</ENT> </ROW> <ROW> <ENT I="01">U096</ENT> <ENT>80-15-9</ENT> <ENT>Hydroperoxide, 1-methyl-1-phenylethyl- (R)</ENT> </ROW> <ROW> <ENT I="01">U116</ENT> <ENT>96-45-7</ENT> <ENT>2-Imidazolidinethione</ENT> </ROW> <ROW> <ENT I="01">U137</ENT> <ENT>193-39-5</ENT> <ENT>Indeno[1,2,3-cd]pyrene</ENT> </ROW> <ROW> <ENT I="01">U190</ENT> <ENT>85-44-9</ENT> <ENT>1,3-Isobenzofurandione</ENT> </ROW> <ROW> <ENT I="01">U140</ENT> <ENT>78-83-1</ENT> <ENT>Isobutyl alcohol (I,T)</ENT> </ROW> <ROW> <ENT I="01">U141</ENT> <ENT>120-58-1</ENT> <ENT>Isosafrole</ENT> </ROW> <ROW> <ENT I="01">U142</ENT> <ENT>143-50-0</ENT> <ENT>Kepone</ENT> </ROW> <ROW> <ENT I="01">U143</ENT> <ENT>303-34-4</ENT> <ENT>Lasiocarpine</ENT> </ROW> <ROW> <ENT I="01">U144</ENT> <ENT>301-04-2</ENT> <ENT>Lead acetate</ENT> </ROW> <ROW> <ENT I="01">U146</ENT> <ENT>1335-32-6</ENT> <ENT>Lead, bis(acetato-O)tetrahydroxytri-</ENT> </ROW> <ROW> <ENT I="01">U145</ENT> <ENT>7446-27-7</ENT> <ENT>Lead phosphate</ENT> </ROW> <ROW> <ENT I="01">U146</ENT> <ENT>1335-32-6</ENT> <ENT>Lead subacetate</ENT> </ROW> <ROW> <ENT I="01">U129</ENT> <ENT>58-89-9</ENT> <ENT>Lindane</ENT> </ROW> <ROW> <ENT I="01">U163</ENT> <ENT>70-25-7</ENT> <ENT>MNNG</ENT> </ROW> <ROW> <ENT I="01">U147</ENT> <ENT>108-31-6</ENT> <ENT>Maleic anhydride</ENT> </ROW> <ROW> <PRTPAGE P="87"/> <ENT I="01">U148</ENT> <ENT>123-33-1</ENT> <ENT>Maleic hydrazide</ENT> </ROW> <ROW> <ENT I="01">U149</ENT> <ENT>109-77-3</ENT> <ENT>Malononitrile</ENT> </ROW> <ROW> <ENT I="01">U150</ENT> <ENT>148-82-3</ENT> <ENT>Melphalan</ENT> </ROW> <ROW> <ENT I="01">U151</ENT> <ENT>7439-97-6</ENT> <ENT>Mercury</ENT> </ROW> <ROW> <ENT I="01">U152</ENT> <ENT>126-98-7</ENT> <ENT>Methacrylonitrile (I, T)</ENT> </ROW> <ROW> <ENT I="01">U092</ENT> <ENT>124-40-3</ENT> <ENT>Methanamine, N-methyl- (I)</ENT> </ROW> <ROW> <ENT I="01">U029</ENT> <ENT>74-83-9</ENT> <ENT>Methane, bromo-</ENT> </ROW> <ROW> <ENT I="01">U045</ENT> <ENT>74-87-3</ENT> <ENT>Methane, chloro- (I, T)</ENT> </ROW> <ROW> <ENT I="01">U046</ENT> <ENT>107-30-2</ENT> <ENT>Methane, chloromethoxy-</ENT> </ROW> <ROW> <ENT I="01">U068</ENT> <ENT>74-95-3</ENT> <ENT>Methane, dibromo-</ENT> </ROW> <ROW> <ENT I="01">U080</ENT> <ENT>75-09-2</ENT> <ENT>Methane, dichloro-</ENT> </ROW> <ROW> <ENT I="01">U075</ENT> <ENT>75-71-8</ENT> <ENT>Methane, dichlorodifluoro-</ENT> </ROW> <ROW> <ENT I="01">U138</ENT> <ENT>74-88-4</ENT> <ENT>Methane, iodo-</ENT> </ROW> <ROW> <ENT I="01">U119</ENT> <ENT>62-50-0</ENT> <ENT>Methanesulfonic acid, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U211</ENT> <ENT>56-23-5</ENT> <ENT>Methane, tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U153</ENT> <ENT>74-93-1</ENT> <ENT>Methanethiol (I, T)</ENT> </ROW> <ROW> <ENT I="01">U225</ENT> <ENT>75-25-2</ENT> <ENT>Methane, tribromo-</ENT> </ROW> <ROW> <ENT I="01">U044</ENT> <ENT>67-66-3</ENT> <ENT>Methane, trichloro-</ENT> </ROW> <ROW> <ENT I="01">U121</ENT> <ENT>75-69-4</ENT> <ENT>Methane, trichlorofluoro-</ENT> </ROW> <ROW> <ENT I="01">U036</ENT> <ENT>57-74-9</ENT> <ENT>4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-</ENT> </ROW> <ROW> <ENT I="01">U154</ENT> <ENT>67-56-1</ENT> <ENT>Methanol (I)</ENT> </ROW> <ROW> <ENT I="01">U155</ENT> <ENT>91-80-5</ENT> <ENT>Methapyrilene</ENT> </ROW> <ROW> <ENT I="01">U142</ENT> <ENT>143-50-0</ENT> <ENT>1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1,1a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-</ENT> </ROW> <ROW> <ENT I="01">U247</ENT> <ENT>72-43-5</ENT> <ENT>Methoxychlor</ENT> </ROW> <ROW> <ENT I="01">U154</ENT> <ENT>67-56-1</ENT> <ENT>Methyl alcohol (I)</ENT> </ROW> <ROW> <ENT I="01">U029</ENT> <ENT>74-83-9</ENT> <ENT>Methyl bromide</ENT> </ROW> <ROW> <ENT I="01">U186</ENT> <ENT>504-60-9</ENT> <ENT>1-Methylbutadiene (I)</ENT> </ROW> <ROW> <ENT I="01">U045</ENT> <ENT>74-87-3</ENT> <ENT>Methyl chloride (I,T)</ENT> </ROW> <ROW> <ENT I="01">U156</ENT> <ENT>79-22-1</ENT> <ENT>Methyl chlorocarbonate (I,T)</ENT> </ROW> <ROW> <ENT I="01">U226</ENT> <ENT>71-55-6</ENT> <ENT>Methyl chloroform</ENT> </ROW> <ROW> <ENT I="01">U157</ENT> <ENT>56-49-5</ENT> <ENT>3-Methylcholanthrene</ENT> </ROW> <ROW> <ENT I="01">U158</ENT> <ENT>101-14-4</ENT> <ENT>4,4′-Methylenebis(2-chloroaniline)</ENT> </ROW> <ROW> <ENT I="01">U068</ENT> <ENT>74-95-3</ENT> <ENT>Methylene bromide</ENT> </ROW> <ROW> <ENT I="01">U080</ENT> <ENT>75-09-2</ENT> <ENT>Methylene chloride</ENT> </ROW> <ROW> <ENT I="01">U159</ENT> <ENT>78-93-3</ENT> <ENT>Methyl ethyl ketone (MEK) (I,T)</ENT> </ROW> <ROW> <ENT I="01">U160</ENT> <ENT>1338-23-4</ENT> <ENT>Methyl ethyl ketone peroxide (R,T)</ENT> </ROW> <ROW> <ENT I="01">U138</ENT> <ENT>74-88-4</ENT> <ENT>Methyl iodide</ENT> </ROW> <ROW> <ENT I="01">U161</ENT> <ENT>108-10-1</ENT> <ENT>Methyl isobutyl ketone (I)</ENT> </ROW> <ROW> <ENT I="01">U162</ENT> <ENT>80-62-6</ENT> <ENT>Methyl methacrylate (I,T)</ENT> </ROW> <ROW> <ENT I="01">U161</ENT> <ENT>108-10-1</ENT> <ENT>4-Methyl-2-pentanone (I)</ENT> </ROW> <ROW> <ENT I="01">U164</ENT> <ENT>56-04-2</ENT> <ENT>Methylthiouracil</ENT> </ROW> <ROW> <ENT I="01">U010</ENT> <ENT>50-07-7</ENT> <ENT>Mitomycin C</ENT> </ROW> <ROW> <ENT I="01">U059</ENT> <ENT>20830-81-3</ENT> <ENT>5,12-Naphthacenedione, 8-acetyl-10-[(3-amino-2,3,6-trideoxy)-alpha-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-</ENT> </ROW> <ROW> <ENT I="01">U167</ENT> <ENT>134-32-7</ENT> <ENT>1-Naphthalenamine</ENT> </ROW> <ROW> <ENT I="01">U168</ENT> <ENT>91-59-8</ENT> <ENT>2-Naphthalenamine</ENT> </ROW> <ROW> <ENT I="01">U026</ENT> <ENT>494-03-1</ENT> <ENT>Naphthalenamine, N,N′-bis(2-chloroethyl)-</ENT> </ROW> <ROW> <ENT I="01">U165</ENT> <ENT>91-20-3</ENT> <ENT>Naphthalene</ENT> </ROW> <ROW> <ENT I="01">U047</ENT> <ENT>91-58-7</ENT> <ENT>Naphthalene, 2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U166</ENT> <ENT>130-15-4</ENT> <ENT>1,4-Naphthalenedione</ENT> </ROW> <ROW> <ENT I="01">U236</ENT> <ENT>72-57-1</ENT> <ENT>2,7-Naphthalenedisulfonic acid, 3,3′-[(3,3′-<LI>dimethyl[1,1′-biphenyl]-4,4′-diyl)bis(azo)bis[5-amino-4-hydroxy]-, tetrasodium salt</LI> </ENT> </ROW> <ROW> <ENT I="01">U279</ENT> <ENT>63-25-2</ENT> <ENT>1-Naphthalenol, methylcarbamate.</ENT> </ROW> <ROW> <ENT I="01">U166</ENT> <ENT>130-15-4</ENT> <ENT>1,4-Naphthoquinone</ENT> </ROW> <ROW> <ENT I="01">U167</ENT> <ENT>134-32-7</ENT> <ENT>alpha-Naphthylamine</ENT> </ROW> <ROW> <ENT I="01">U168</ENT> <ENT>91-59-8</ENT> <ENT>beta-Naphthylamine</ENT> </ROW> <ROW> <ENT I="01">U217</ENT> <ENT>10102-45-1</ENT> <ENT>Nitric acid, thallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">U169</ENT> <ENT>98-95-3</ENT> <ENT>Nitrobenzene (I,T)</ENT> </ROW> <ROW> <ENT I="01">U170</ENT> <ENT>100-02-7</ENT> <ENT>p-Nitrophenol</ENT> </ROW> <ROW> <ENT I="01">U171</ENT> <ENT>79-46-9</ENT> <ENT>2-Nitropropane (I,T)</ENT> </ROW> <ROW> <ENT I="01">U172</ENT> <ENT>924-16-3</ENT> <ENT>N-Nitrosodi-n-butylamine</ENT> </ROW> <ROW> <ENT I="01">U173</ENT> <ENT>1116-54-7</ENT> <ENT>N-Nitrosodiethanolamine</ENT> </ROW> <ROW> <ENT I="01">U174</ENT> <ENT>55-18-5</ENT> <ENT>N-Nitrosodiethylamine</ENT> </ROW> <ROW> <ENT I="01">U176</ENT> <ENT>759-73-9</ENT> <ENT>N-Nitroso-N-ethylurea</ENT> </ROW> <ROW> <ENT I="01">U177</ENT> <ENT>684-93-5</ENT> <ENT>N-Nitroso-N-methylurea</ENT> </ROW> <ROW> <ENT I="01">U178</ENT> <ENT>615-53-2</ENT> <ENT>N-Nitroso-N-methylurethane</ENT> </ROW> <ROW> <ENT I="01">U179</ENT> <ENT>100-75-4</ENT> <ENT>N-Nitrosopiperidine</ENT> </ROW> <ROW> <ENT I="01">U180</ENT> <ENT>930-55-2</ENT> <ENT>N-Nitrosopyrrolidine</ENT> </ROW> <ROW> <ENT I="01">U181</ENT> <ENT>99-55-8</ENT> <ENT>5-Nitro-o-toluidine</ENT> </ROW> <ROW> <ENT I="01">U193</ENT> <ENT>1120-71-4</ENT> <ENT>1,2-Oxathiolane, 2,2-dioxide</ENT> </ROW> <ROW> <ENT I="01">U058</ENT> <ENT>50-18-0</ENT> <ENT>2H-1,3,2-Oxazaphosphorin-2-amine,<LI>N,N-bis(2-chloroethyl)tetrahydro-, 2-oxide</LI> </ENT> </ROW> <ROW> <PRTPAGE P="88"/> <ENT I="01">U115</ENT> <ENT>75-21-8</ENT> <ENT>Oxirane (I,T)</ENT> </ROW> <ROW> <ENT I="01">U126</ENT> <ENT>765-34-4</ENT> <ENT>Oxiranecarboxyaldehyde</ENT> </ROW> <ROW> <ENT I="01">U041</ENT> <ENT>106-89-8</ENT> <ENT>Oxirane, (chloromethyl)-</ENT> </ROW> <ROW> <ENT I="18">U182</ENT> <ENT>123-63-7</ENT> <ENT>Paraldehyde</ENT> </ROW> <ROW> <ENT I="01">U183</ENT> <ENT>608-93-5</ENT> <ENT>Pentachlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U184</ENT> <ENT>76-01-7</ENT> <ENT>Pentachloroethane</ENT> </ROW> <ROW> <ENT I="01">U185</ENT> <ENT>82-68-8</ENT> <ENT>Pentachloronitrobenzene (PCNB)</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>87-86-5</ENT> <ENT>Pentachlorophenol</ENT> </ROW> <ROW> <ENT I="01">U161</ENT> <ENT>108-10-1</ENT> <ENT>Pentanol, 4-methyl-</ENT> </ROW> <ROW> <ENT I="01">U186</ENT> <ENT>504-60-9</ENT> <ENT>1,3-Pentadiene (I)</ENT> </ROW> <ROW> <ENT I="01">U187</ENT> <ENT>62-44-2</ENT> <ENT>Phenacetin</ENT> </ROW> <ROW> <ENT I="01">U188</ENT> <ENT>108-95-2</ENT> <ENT>Phenol</ENT> </ROW> <ROW> <ENT I="01">U048</ENT> <ENT>95-57-8</ENT> <ENT>Phenol, 2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U039</ENT> <ENT>59-50-7</ENT> <ENT>Phenol, 4-chloro-3-methyl-</ENT> </ROW> <ROW> <ENT I="01">U081</ENT> <ENT>120-83-2</ENT> <ENT>Phenol, 2,4-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U082</ENT> <ENT>87-65-0</ENT> <ENT>Phenol, 2,6-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U089</ENT> <ENT>56-53-1</ENT> <ENT>Phenol, 4,4′-(1,2-diethyl-1,2-ethenediyl)bis-, (E)-</ENT> </ROW> <ROW> <ENT I="01">U101</ENT> <ENT>105-67-9</ENT> <ENT>Phenol, 2,4-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U052</ENT> <ENT>1319-77-3</ENT> <ENT>Phenol, methyl-</ENT> </ROW> <ROW> <ENT I="01">U132</ENT> <ENT>70-30-4</ENT> <ENT>Phenol, 2,2′-methylenebis[3,4,6-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U411</ENT> <ENT>114-26-1</ENT> <ENT>Phenol, 2-(1-methylethoxy)-, methylcarbamate.</ENT> </ROW> <ROW> <ENT I="01">U170</ENT> <ENT>100-02-7</ENT> <ENT>Phenol, 4-nitro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>87-86-5</ENT> <ENT>Phenol, pentachloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>58-90-2</ENT> <ENT>Phenol, 2,3,4,6-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>95-95-4</ENT> <ENT>Phenol, 2,4,5-trichloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>88-06-2</ENT> <ENT>Phenol, 2,4,6-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U150</ENT> <ENT>148-82-3</ENT> <ENT>L-Phenylalanine, 4-[bis(2-chloroethyl)amino]-</ENT> </ROW> <ROW> <ENT I="01">U145</ENT> <ENT>7446-27-7</ENT> <ENT>Phosphoric acid, lead(2+) salt (2:3)</ENT> </ROW> <ROW> <ENT I="01">U087</ENT> <ENT>3288-58-2</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-methyl ester</ENT> </ROW> <ROW> <ENT I="01">U189</ENT> <ENT>1314-80-3</ENT> <ENT>Phosphorus sulfide (R)</ENT> </ROW> <ROW> <ENT I="01">U190</ENT> <ENT>85-44-9</ENT> <ENT>Phthalic anhydride</ENT> </ROW> <ROW> <ENT I="01">U191</ENT> <ENT>109-06-8</ENT> <ENT>2-Picoline</ENT> </ROW> <ROW> <ENT I="01">U179</ENT> <ENT>100-75-4</ENT> <ENT>Piperidine, 1-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U192</ENT> <ENT>23950-58-5</ENT> <ENT>Pronamide</ENT> </ROW> <ROW> <ENT I="01">U194</ENT> <ENT>107-10-8</ENT> <ENT>1-Propanamine (I,T)</ENT> </ROW> <ROW> <ENT I="01">U111</ENT> <ENT>621-64-7</ENT> <ENT>1-Propanamine, N-nitroso-N-propyl-</ENT> </ROW> <ROW> <ENT I="01">U110</ENT> <ENT>142-84-7</ENT> <ENT>1-Propanamine, N-propyl- (I)</ENT> </ROW> <ROW> <ENT I="01">U066</ENT> <ENT>96-12-8</ENT> <ENT>Propane, 1,2-dibromo-3-chloro-</ENT> </ROW> <ROW> <ENT I="01">U083</ENT> <ENT>78-87-5</ENT> <ENT>Propane, 1,2-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U149</ENT> <ENT>109-77-3</ENT> <ENT>Propanedinitrile</ENT> </ROW> <ROW> <ENT I="01">U171</ENT> <ENT>79-46-9</ENT> <ENT>Propane, 2-nitro- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U027</ENT> <ENT>108-60-1</ENT> <ENT>Propane, 2,2′-oxybis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U193</ENT> <ENT>1120-71-4</ENT> <ENT>1,3-Propane sultone</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-72-1</ENT> <ENT>Propanoic acid, 2-(2,4,5-trichlorophenoxy)-</ENT> </ROW> <ROW> <ENT I="01">U235</ENT> <ENT>126-72-7</ENT> <ENT>1-Propanol, 2,3-dibromo-, phosphate (3:1)</ENT> </ROW> <ROW> <ENT I="01">U140</ENT> <ENT>78-83-1</ENT> <ENT>1-Propanol, 2-methyl- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U002</ENT> <ENT>67-64-1</ENT> <ENT>2-Propanone (I)</ENT> </ROW> <ROW> <ENT I="01">U007</ENT> <ENT>79-06-1</ENT> <ENT>2-Propenamide</ENT> </ROW> <ROW> <ENT I="01">U084</ENT> <ENT>542-75-6</ENT> <ENT>1-Propene, 1,3-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U243</ENT> <ENT>1888-71-7</ENT> <ENT>1-Propene, 1,1,2,3,3,3-hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U009</ENT> <ENT>107-13-1</ENT> <ENT>2-Propenenitrile</ENT> </ROW> <ROW> <ENT I="01">U152</ENT> <ENT>126-98-7</ENT> <ENT>2-Propenenitrile, 2-methyl- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U008</ENT> <ENT>79-10-7</ENT> <ENT>2-Propenoic acid (I)</ENT> </ROW> <ROW> <ENT I="01">U113</ENT> <ENT>140-88-5</ENT> <ENT>2-Propenoic acid, ethyl ester (I)</ENT> </ROW> <ROW> <ENT I="01">U118</ENT> <ENT>97-63-2</ENT> <ENT>2-Propenoic acid, 2-methyl-, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U162</ENT> <ENT>80-62-6</ENT> <ENT>2-Propenoic acid, 2-methyl-, methyl ester (I,T)</ENT> </ROW> <ROW> <ENT I="01">U373</ENT> <ENT>122-42-9</ENT> <ENT>Propham.</ENT> </ROW> <ROW> <ENT I="01">U411</ENT> <ENT>114-26-1</ENT> <ENT>Propoxur.</ENT> </ROW> <ROW> <ENT I="01">U387</ENT> <ENT>52888-80-9</ENT> <ENT>Prosulfocarb.</ENT> </ROW> <ROW> <ENT I="01">U194</ENT> <ENT>107-10-8</ENT> <ENT>n-Propylamine (I,T)</ENT> </ROW> <ROW> <ENT I="01">U083</ENT> <ENT>78-87-5</ENT> <ENT>Propylene dichloride</ENT> </ROW> <ROW> <ENT I="01">U148</ENT> <ENT>123-33-1</ENT> <ENT>3,6-Pyridazinedione, 1,2-dihydro-</ENT> </ROW> <ROW> <ENT I="01">U196</ENT> <ENT>110-86-1</ENT> <ENT>Pyridine</ENT> </ROW> <ROW> <ENT I="01">U191</ENT> <ENT>109-06-8</ENT> <ENT>Pyridine, 2-methyl-</ENT> </ROW> <ROW> <ENT I="01">U237</ENT> <ENT>66-75-1</ENT> <ENT>2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-<LI>chloroethyl)amino]-</LI> </ENT> </ROW> <ROW> <PRTPAGE P="89"/> <ENT I="01">U164</ENT> <ENT>56-04-2</ENT> <ENT>4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-</ENT> </ROW> <ROW> <ENT I="01">U180</ENT> <ENT>930-55-2</ENT> <ENT>Pyrrolidine, 1-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U200</ENT> <ENT>50-55-5</ENT> <ENT>Reserpine</ENT> </ROW> <ROW> <ENT I="01">U201</ENT> <ENT>108-46-3</ENT> <ENT>Resorcinol</ENT> </ROW> <ROW> <ENT I="01">U202</ENT> <ENT> <SU>1</SU> 81-07-2</ENT> <ENT>Saccharin, & salts</ENT> </ROW> <ROW> <ENT I="01">U203</ENT> <ENT>94-59-7</ENT> <ENT>Safrole</ENT> </ROW> <ROW> <ENT I="01">U204</ENT> <ENT>7783-00-8</ENT> <ENT>Selenious acid</ENT> </ROW> <ROW> <ENT I="01">U204</ENT> <ENT>7783-00-8</ENT> <ENT>Selenium dioxide</ENT> </ROW> <ROW> <ENT I="01">U205</ENT> <ENT>7488-56-4</ENT> <ENT>Selenium sulfide</ENT> </ROW> <ROW> <ENT I="01">U205</ENT> <ENT>7488-56-4</ENT> <ENT>Selenium sulfide SeS<E T="52">2</E> (R,T)</ENT> </ROW> <ROW> <ENT I="01">U015</ENT> <ENT>115-02-6</ENT> <ENT>L-Serine, diazoacetate (ester)</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-72-1</ENT> <ENT>Silvex (2,4,5-TP)</ENT> </ROW> <ROW> <ENT I="01">U206</ENT> <ENT>18883-66-4</ENT> <ENT>Streptozotocin</ENT> </ROW> <ROW> <ENT I="01">U103</ENT> <ENT>77-78-1</ENT> <ENT>Sulfuric acid, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U189</ENT> <ENT>1314-80-3</ENT> <ENT>Sulfur phosphide (R)</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-76-5</ENT> <ENT>2,4,5-T</ENT> </ROW> <ROW> <ENT I="01">U207</ENT> <ENT>95-94-3</ENT> <ENT>1,2,4,5-Tetrachlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U208</ENT> <ENT>630-20-6</ENT> <ENT>1,1,1,2-Tetrachloroethane</ENT> </ROW> <ROW> <ENT I="01">U209</ENT> <ENT>79-34-5</ENT> <ENT>1,1,2,2-Tetrachloroethane</ENT> </ROW> <ROW> <ENT I="01">U210</ENT> <ENT>127-18-4</ENT> <ENT>Tetrachloroethylene</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>58-90-2</ENT> <ENT>2,3,4,6-Tetrachlorophenol</ENT> </ROW> <ROW> <ENT I="01">U213</ENT> <ENT>109-99-9</ENT> <ENT>Tetrahydrofuran (I)</ENT> </ROW> <ROW> <ENT I="01">U214</ENT> <ENT>563-68-8</ENT> <ENT>Thallium(I) acetate</ENT> </ROW> <ROW> <ENT I="01">U215</ENT> <ENT>6533-73-9</ENT> <ENT>Thallium(I) carbonate</ENT> </ROW> <ROW> <ENT I="01">U216</ENT> <ENT>7791-12-0</ENT> <ENT>Thallium(I) chloride</ENT> </ROW> <ROW> <ENT I="01">U216</ENT> <ENT>7791-12-0</ENT> <ENT>thallium chloride TlCl</ENT> </ROW> <ROW> <ENT I="01">U217</ENT> <ENT>10102-45-1</ENT> <ENT>Thallium(I) nitrate</ENT> </ROW> <ROW> <ENT I="01">U218</ENT> <ENT>62-55-5</ENT> <ENT>Thioacetamide</ENT> </ROW> <ROW> <ENT I="01">U410</ENT> <ENT>59669-26-0</ENT> <ENT>Thiodicarb.</ENT> </ROW> <ROW> <ENT I="01">U153</ENT> <ENT>74-93-1</ENT> <ENT>Thiomethanol (I,T)</ENT> </ROW> <ROW> <ENT I="01">U244</ENT> <ENT>137-26-8</ENT> <ENT>Thioperoxydicarbonic diamide [(H<E T="52">2</E> N)C(S)]<E T="52">2</E> S<E T="52">2</E>, tetramethyl-</ENT> </ROW> <ROW> <ENT I="01">U409</ENT> <ENT>23564-05-8</ENT> <ENT>Thiophanate-methyl.</ENT> </ROW> <ROW> <ENT I="01">U219</ENT> <ENT>62-56-6</ENT> <ENT>Thiourea</ENT> </ROW> <ROW> <ENT I="01">U244</ENT> <ENT>137-26-8</ENT> <ENT>Thiram</ENT> </ROW> <ROW> <ENT I="01">U220</ENT> <ENT>108-88-3</ENT> <ENT>Toluene</ENT> </ROW> <ROW> <ENT I="01">U221</ENT> <ENT>25376-45-8</ENT> <ENT>Toluenediamine</ENT> </ROW> <ROW> <ENT I="01">U223</ENT> <ENT>26471-62-5</ENT> <ENT>Toluene diisocyanate (R,T)</ENT> </ROW> <ROW> <ENT I="01">U328</ENT> <ENT>95-53-4</ENT> <ENT>o-Toluidine</ENT> </ROW> <ROW> <ENT I="01">U353</ENT> <ENT>106-49-0</ENT> <ENT>p-Toluidine</ENT> </ROW> <ROW> <ENT I="01">U222</ENT> <ENT>636-21-5</ENT> <ENT>o-Toluidine hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U389</ENT> <ENT>2303-17-5</ENT> <ENT>Triallate.</ENT> </ROW> <ROW> <ENT I="01">U011</ENT> <ENT>61-82-5</ENT> <ENT>1H-1,2,4-Triazol-3-amine</ENT> </ROW> <ROW> <ENT I="01">U226</ENT> <ENT>71-55-6</ENT> <ENT>1,1,1-Trichloroethane</ENT> </ROW> <ROW> <ENT I="01">U227</ENT> <ENT>79-00-5</ENT> <ENT>1,1,2-Trichloroethane</ENT> </ROW> <ROW> <ENT I="01">U228</ENT> <ENT>79-01-6</ENT> <ENT>Trichloroethylene</ENT> </ROW> <ROW> <ENT I="01">U121</ENT> <ENT>75-69-4</ENT> <ENT>Trichloromonofluoromethane</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>95-95-4</ENT> <ENT>2,4,5-Trichlorophenol</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>88-06-2</ENT> <ENT>2,4,6-Trichlorophenol</ENT> </ROW> <ROW> <ENT I="01">U404</ENT> <ENT>121-44-8</ENT> <ENT>Triethylamine.</ENT> </ROW> <ROW> <ENT I="01">U234</ENT> <ENT>99-35-4</ENT> <ENT>1,3,5-Trinitrobenzene (R,T)</ENT> </ROW> <ROW> <ENT I="01">U182</ENT> <ENT>123-63-7</ENT> <ENT>1,3,5-Trioxane, 2,4,6-trimethyl-</ENT> </ROW> <ROW> <ENT I="01">U235</ENT> <ENT>126-72-7</ENT> <ENT>Tris(2,3-dibromopropyl) phosphate</ENT> </ROW> <ROW> <ENT I="01">U236</ENT> <ENT>72-57-1</ENT> <ENT>Trypan blue</ENT> </ROW> <ROW> <ENT I="01">U237</ENT> <ENT>66-75-1</ENT> <ENT>Uracil mustard</ENT> </ROW> <ROW> <ENT I="01">U176</ENT> <ENT>759-73-9</ENT> <ENT>Urea, N-ethyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U177</ENT> <ENT>684-93-5</ENT> <ENT>Urea, N-methyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U043</ENT> <ENT>75-01-4</ENT> <ENT>Vinyl chloride</ENT> </ROW> <ROW> <ENT I="01">U248</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>Warfarin, & salts, when present at concentrations of 0.3% or less</ENT> </ROW> <ROW> <ENT I="01">U239</ENT> <ENT>1330-20-7</ENT> <ENT>Xylene (I)</ENT> </ROW> <ROW> <ENT I="01">U200</ENT> <ENT>50-55-5</ENT> <ENT>Yohimban-16-carboxylic acid, 11,17-dimethoxy-18-[(3,4,5-trimethoxybenzoyl)oxy]-, methyl ester, (3beta,16beta,17alpha,18beta,20alpha)-</ENT> </ROW> <ROW> <ENT I="01">U249</ENT> <ENT>1314-84-7</ENT> <ENT>Zinc phosphide Zn<E T="52">3</E> P<E T="52">2</E>, when present at concentrations of 10% or less</ENT> </ROW> <ROW> <ENT I="01">U001</ENT> <ENT>75-07-0</ENT> <ENT>Acetaldehyde (I)</ENT> </ROW> <ROW> <ENT I="01">U001</ENT> <ENT>75-07-0</ENT> <ENT>Ethanal (I)</ENT> </ROW> <ROW> <ENT I="01">U002</ENT> <ENT>67-64-1</ENT> <ENT>Acetone (I)</ENT> </ROW> <ROW> <ENT I="01">U002</ENT> <ENT>67-64-1</ENT> <ENT>2-Propanone (I)</ENT> </ROW> <ROW> <ENT I="01">U003</ENT> <ENT>75-05-8</ENT> <ENT>Acetonitrile (I,T)</ENT> </ROW> <ROW> <PRTPAGE P="90"/> <ENT I="01">U004</ENT> <ENT>98-86-2</ENT> <ENT>Acetophenone</ENT> </ROW> <ROW> <ENT I="01">U004</ENT> <ENT>98-86-2</ENT> <ENT>Ethanone, 1-phenyl-</ENT> </ROW> <ROW> <ENT I="01">U005</ENT> <ENT>53-96-3</ENT> <ENT>Acetamide, -9H-fluoren-2-yl-</ENT> </ROW> <ROW> <ENT I="01">U005</ENT> <ENT>53-96-3</ENT> <ENT>2-Acetylaminofluorene</ENT> </ROW> <ROW> <ENT I="01">U006</ENT> <ENT>75-36-5</ENT> <ENT>Acetyl chloride (C,R,T)</ENT> </ROW> <ROW> <ENT I="01">U007</ENT> <ENT>79-06-1</ENT> <ENT>Acrylamide</ENT> </ROW> <ROW> <ENT I="01">U007</ENT> <ENT>79-06-1</ENT> <ENT>2-Propenamide</ENT> </ROW> <ROW> <ENT I="01">U008</ENT> <ENT>79-10-7</ENT> <ENT>Acrylic acid (I)</ENT> </ROW> <ROW> <ENT I="01">U008</ENT> <ENT>79-10-7</ENT> <ENT>2-Propenoic acid (I)</ENT> </ROW> <ROW> <ENT I="01">U009</ENT> <ENT>107-13-1</ENT> <ENT>Acrylonitrile</ENT> </ROW> <ROW> <ENT I="01">U009</ENT> <ENT>107-13-1</ENT> <ENT>2-Propenenitrile</ENT> </ROW> <ROW> <ENT I="01">U010</ENT> <ENT>50-07-7</ENT> <ENT>Azirino[2′,3′:3,4]pyrrolo[1,2-a]indole-4,7-dione, 6-amino-8-[[(aminocarbonyl)oxy]methyl]-1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5-methyl-, [1aS-(1aalpha, 8beta,8aalpha,8balpha)]-</ENT> </ROW> <ROW> <ENT I="01">U010</ENT> <ENT>50-07-7</ENT> <ENT>Mitomycin C</ENT> </ROW> <ROW> <ENT I="01">U011</ENT> <ENT>61-82-5</ENT> <ENT>Amitrole</ENT> </ROW> <ROW> <ENT I="01">U011</ENT> <ENT>61-82-5</ENT> <ENT>1H-1,2,4-Triazol-3-amine</ENT> </ROW> <ROW> <ENT I="01">U012</ENT> <ENT>62-53-3</ENT> <ENT>Aniline (I,T)</ENT> </ROW> <ROW> <ENT I="01">U012</ENT> <ENT>62-53-3</ENT> <ENT>Benzenamine (I,T)</ENT> </ROW> <ROW> <ENT I="01">U014</ENT> <ENT>492-80-8</ENT> <ENT>Auramine</ENT> </ROW> <ROW> <ENT I="01">U014</ENT> <ENT>492-80-8</ENT> <ENT>Benzenamine, 4,4′-carbonimidoylbis[N,N-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U015</ENT> <ENT>115-02-6</ENT> <ENT>Azaserine</ENT> </ROW> <ROW> <ENT I="01">U015</ENT> <ENT>115-02-6</ENT> <ENT>L-Serine, diazoacetate (ester)</ENT> </ROW> <ROW> <ENT I="01">U016</ENT> <ENT>225-51-4</ENT> <ENT>Benz[c]acridine</ENT> </ROW> <ROW> <ENT I="01">U017</ENT> <ENT>98-87-3</ENT> <ENT>Benzal chloride</ENT> </ROW> <ROW> <ENT I="01">U017</ENT> <ENT>98-87-3</ENT> <ENT>Benzene, (dichloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">U018</ENT> <ENT>56-55-3</ENT> <ENT>Benz[a]anthracene</ENT> </ROW> <ROW> <ENT I="01">U019</ENT> <ENT>71-43-2</ENT> <ENT>Benzene (I,T)</ENT> </ROW> <ROW> <ENT I="01">U020</ENT> <ENT>98-09-9</ENT> <ENT>Benzenesulfonic acid chloride (C,R)</ENT> </ROW> <ROW> <ENT I="01">U020</ENT> <ENT>98-09-9</ENT> <ENT>Benzenesulfonyl chloride (C,R)</ENT> </ROW> <ROW> <ENT I="01">U021</ENT> <ENT>92-87-5</ENT> <ENT>Benzidine</ENT> </ROW> <ROW> <ENT I="01">U021</ENT> <ENT>92-87-5</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine</ENT> </ROW> <ROW> <ENT I="01">U022</ENT> <ENT>50-32-8</ENT> <ENT>Benzo[a]pyrene</ENT> </ROW> <ROW> <ENT I="01">U023</ENT> <ENT>98-07-7</ENT> <ENT>Benzene, (trichloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">U023</ENT> <ENT>98-07-7</ENT> <ENT>Benzotrichloride (C,R,T)</ENT> </ROW> <ROW> <ENT I="01">U024</ENT> <ENT>111-91-1</ENT> <ENT>Dichloromethoxy ethane</ENT> </ROW> <ROW> <ENT I="01">U024</ENT> <ENT>111-91-1</ENT> <ENT>Ethane, 1,1′-[methylenebis(oxy)]bis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U025</ENT> <ENT>111-44-4</ENT> <ENT>Dichloroethyl ether</ENT> </ROW> <ROW> <ENT I="01">U025</ENT> <ENT>111-44-4</ENT> <ENT>Ethane, 1,1′-oxybis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U026</ENT> <ENT>494-03-1</ENT> <ENT>Chlornaphazin</ENT> </ROW> <ROW> <ENT I="01">U026</ENT> <ENT>494-03-1</ENT> <ENT>Naphthalenamine, N,N′-bis(2-chloroethyl)-</ENT> </ROW> <ROW> <ENT I="01">U027</ENT> <ENT>108-60-1</ENT> <ENT>Dichloroisopropyl ether</ENT> </ROW> <ROW> <ENT I="01">U027</ENT> <ENT>108-60-1</ENT> <ENT>Propane, 2,2′-oxybis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U028</ENT> <ENT>117-81-7</ENT> <ENT>1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester</ENT> </ROW> <ROW> <ENT I="01">U028</ENT> <ENT>117-81-7</ENT> <ENT>Diethylhexyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U029</ENT> <ENT>74-83-9</ENT> <ENT>Methane, bromo-</ENT> </ROW> <ROW> <ENT I="01">U029</ENT> <ENT>74-83-9</ENT> <ENT>Methyl bromide</ENT> </ROW> <ROW> <ENT I="01">U030</ENT> <ENT>101-55-3</ENT> <ENT>Benzene, 1-bromo-4-phenoxy-</ENT> </ROW> <ROW> <ENT I="01">U030</ENT> <ENT>101-55-3</ENT> <ENT>4-Bromophenyl phenyl ether</ENT> </ROW> <ROW> <ENT I="01">U031</ENT> <ENT>71-36-3</ENT> <ENT>1-Butanol (I)</ENT> </ROW> <ROW> <ENT I="01">U031</ENT> <ENT>71-36-3</ENT> <ENT>n-Butyl alcohol (I)</ENT> </ROW> <ROW> <ENT I="01">U032</ENT> <ENT>13765-19-0</ENT> <ENT>Calcium chromate</ENT> </ROW> <ROW> <ENT I="01">U032</ENT> <ENT>13765-19-0</ENT> <ENT>Chromic acid H<E T="52">2</E> CrO<E T="52">4</E>, calcium salt</ENT> </ROW> <ROW> <ENT I="01">U033</ENT> <ENT>353-50-4</ENT> <ENT>Carbonic difluoride</ENT> </ROW> <ROW> <ENT I="01">U033</ENT> <ENT>353-50-4</ENT> <ENT>Carbon oxyfluoride (R,T)</ENT> </ROW> <ROW> <ENT I="01">U034</ENT> <ENT>75-87-6</ENT> <ENT>Acetaldehyde, trichloro-</ENT> </ROW> <ROW> <ENT I="01">U034</ENT> <ENT>75-87-6</ENT> <ENT>Chloral</ENT> </ROW> <ROW> <ENT I="01">U035</ENT> <ENT>305-03-3</ENT> <ENT>Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-</ENT> </ROW> <ROW> <ENT I="01">U035</ENT> <ENT>305-03-3</ENT> <ENT>Chlorambucil</ENT> </ROW> <ROW> <ENT I="01">U036</ENT> <ENT>57-74-9</ENT> <ENT>Chlordane, alpha & gamma isomers</ENT> </ROW> <ROW> <ENT I="01">U036</ENT> <ENT>57-74-9</ENT> <ENT>4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-</ENT> </ROW> <ROW> <ENT I="01">U037</ENT> <ENT>108-90-7</ENT> <ENT>Benzene, chloro-</ENT> </ROW> <ROW> <ENT I="01">U037</ENT> <ENT>108-90-7</ENT> <ENT>Chlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U038</ENT> <ENT>510-15-6</ENT> <ENT>Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)-alpha-hydroxy-, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U038</ENT> <ENT>510-15-6</ENT> <ENT>Chlorobenzilate</ENT> </ROW> <ROW> <ENT I="01">U039</ENT> <ENT>59-50-7</ENT> <ENT>p-Chloro-m-cresol</ENT> </ROW> <ROW> <ENT I="01">U039</ENT> <ENT>59-50-7</ENT> <ENT>Phenol, 4-chloro-3-methyl-</ENT> </ROW> <ROW> <ENT I="01">U041</ENT> <ENT>106-89-8</ENT> <ENT>Epichlorohydrin</ENT> </ROW> <ROW> <ENT I="01">U041</ENT> <ENT>106-89-8</ENT> <ENT>Oxirane, (chloromethyl)-</ENT> </ROW> <ROW> <ENT I="01">U042</ENT> <ENT>110-75-8</ENT> <ENT>2-Chloroethyl vinyl ether</ENT> </ROW> <ROW> <ENT I="01">U042</ENT> <ENT>110-75-8</ENT> <ENT>Ethene, (2-chloroethoxy)-</ENT> </ROW> <ROW> <ENT I="01">U043</ENT> <ENT>75-01-4</ENT> <ENT>Ethene, chloro-</ENT> </ROW> <ROW> <ENT I="01">U043</ENT> <ENT>75-01-4</ENT> <ENT>Vinyl chloride</ENT> </ROW> <ROW> <PRTPAGE P="91"/> <ENT I="01">U044</ENT> <ENT>67-66-3</ENT> <ENT>Chloroform</ENT> </ROW> <ROW> <ENT I="01">U044</ENT> <ENT>67-66-3</ENT> <ENT>Methane, trichloro-</ENT> </ROW> <ROW> <ENT I="01">U045</ENT> <ENT>74-87-3</ENT> <ENT>Methane, chloro- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U045</ENT> <ENT>74-87-3</ENT> <ENT>Methyl chloride (I,T)</ENT> </ROW> <ROW> <ENT I="01">U046</ENT> <ENT>107-30-2</ENT> <ENT>Chloromethyl methyl ether</ENT> </ROW> <ROW> <ENT I="01">U046</ENT> <ENT>107-30-2</ENT> <ENT>Methane, chloromethoxy-</ENT> </ROW> <ROW> <ENT I="01">U047</ENT> <ENT>91-58-7</ENT> <ENT>beta-Chloronaphthalene</ENT> </ROW> <ROW> <ENT I="01">U047</ENT> <ENT>91-58-7</ENT> <ENT>Naphthalene, 2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U048</ENT> <ENT>95-57-8</ENT> <ENT>o-Chlorophenol</ENT> </ROW> <ROW> <ENT I="01">U048</ENT> <ENT>95-57-8</ENT> <ENT>Phenol, 2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U049</ENT> <ENT>3165-93-3</ENT> <ENT>Benzenamine, 4-chloro-2-methyl-, hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U049</ENT> <ENT>3165-93-3</ENT> <ENT>4-Chloro-o-toluidine, hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U050</ENT> <ENT>218-01-9</ENT> <ENT>Chrysene</ENT> </ROW> <ROW> <ENT I="01">U051</ENT> <ENT/> <ENT>Creosote</ENT> </ROW> <ROW> <ENT I="01">U052</ENT> <ENT>1319-77-3</ENT> <ENT>Cresol (Cresylic acid)</ENT> </ROW> <ROW> <ENT I="01">U052</ENT> <ENT>1319-77-3</ENT> <ENT>Phenol, methyl-</ENT> </ROW> <ROW> <ENT I="01">U053</ENT> <ENT>4170-30-3</ENT> <ENT>2-Butenal</ENT> </ROW> <ROW> <ENT I="01">U053</ENT> <ENT>4170-30-3</ENT> <ENT>Crotonaldehyde</ENT> </ROW> <ROW> <ENT I="01">U055</ENT> <ENT>98-82-8</ENT> <ENT>Benzene, (1-methylethyl)-(I)</ENT> </ROW> <ROW> <ENT I="01">U055</ENT> <ENT>98-82-8</ENT> <ENT>Cumene (I)</ENT> </ROW> <ROW> <ENT I="01">U056</ENT> <ENT>110-82-7</ENT> <ENT>Benzene, hexahydro-(I)</ENT> </ROW> <ROW> <ENT I="01">U056</ENT> <ENT>110-82-7</ENT> <ENT>Cyclohexane (I)</ENT> </ROW> <ROW> <ENT I="01">U057</ENT> <ENT>108-94-1</ENT> <ENT>Cyclohexanone (I)</ENT> </ROW> <ROW> <ENT I="01">U058</ENT> <ENT>50-18-0</ENT> <ENT>Cyclophosphamide</ENT> </ROW> <ROW> <ENT I="01">U058</ENT> <ENT>50-18-0</ENT> <ENT>2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-chloroethyl)tetrahydro-, 2-oxide</ENT> </ROW> <ROW> <ENT I="01">U059</ENT> <ENT>20830-81-3</ENT> <ENT>Daunomycin</ENT> </ROW> <ROW> <ENT I="01">U059</ENT> <ENT>20830-81-3</ENT> <ENT>5,12-Naphthacenedione, 8-acetyl-10-[(3-amino-2,3,6-trideoxy)-alpha-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-</ENT> </ROW> <ROW> <ENT I="01">U060</ENT> <ENT>72-54-8</ENT> <ENT>Benzene, 1,1′-(2,2-dichloroethylidene)bis[4-chloro-</ENT> </ROW> <ROW> <ENT I="01">U060</ENT> <ENT>72-54-8</ENT> <ENT>DDD</ENT> </ROW> <ROW> <ENT I="01">U061</ENT> <ENT>50-29-3</ENT> <ENT>Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4-chloro-</ENT> </ROW> <ROW> <ENT I="01">U061</ENT> <ENT>50-29-3</ENT> <ENT>DDT</ENT> </ROW> <ROW> <ENT I="01">U062</ENT> <ENT>2303-16-4</ENT> <ENT>Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-di chloro-2-propenyl) ester</ENT> </ROW> <ROW> <ENT I="01">U062</ENT> <ENT>2303-16-4</ENT> <ENT>Diallate</ENT> </ROW> <ROW> <ENT I="01">U063</ENT> <ENT>53-70-3</ENT> <ENT>Dibenz[a,h]anthracene</ENT> </ROW> <ROW> <ENT I="01">U064</ENT> <ENT>189-55-9</ENT> <ENT>Benzo[rst]pentaphene</ENT> </ROW> <ROW> <ENT I="01">U064</ENT> <ENT>189-55-9</ENT> <ENT>Dibenzo[a,i]pyrene</ENT> </ROW> <ROW> <ENT I="01">U066</ENT> <ENT>96-12-8</ENT> <ENT>1,2-Dibromo-3-chloropropane</ENT> </ROW> <ROW> <ENT I="01">U066</ENT> <ENT>96-12-8</ENT> <ENT>Propane, 1,2-dibromo-3-chloro-</ENT> </ROW> <ROW> <ENT I="01">U067</ENT> <ENT>106-93-4</ENT> <ENT>Ethane, 1,2-dibromo-</ENT> </ROW> <ROW> <ENT I="01">U067</ENT> <ENT>106-93-4</ENT> <ENT>Ethylene dibromide</ENT> </ROW> <ROW> <ENT I="01">U068</ENT> <ENT>74-95-3</ENT> <ENT>Methane, dibromo-</ENT> </ROW> <ROW> <ENT I="01">U068</ENT> <ENT>74-95-3</ENT> <ENT>Methylene bromide</ENT> </ROW> <ROW> <ENT I="01">U069</ENT> <ENT>84-74-2</ENT> <ENT>1,2-Benzenedicarboxylic acid, dibutyl ester</ENT> </ROW> <ROW> <ENT I="01">U069</ENT> <ENT>84-74-2</ENT> <ENT>Dibutyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U070</ENT> <ENT>95-50-1</ENT> <ENT>Benzene, 1,2-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U070</ENT> <ENT>95-50-1</ENT> <ENT>o-Dichlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U071</ENT> <ENT>541-73-1</ENT> <ENT>Benzene, 1,3-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U071</ENT> <ENT>541-73-1</ENT> <ENT>m-Dichlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U072</ENT> <ENT>106-46-7</ENT> <ENT>Benzene, 1,4-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U072</ENT> <ENT>106-46-7</ENT> <ENT>p-Dichlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U073</ENT> <ENT>91-94-1</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U073</ENT> <ENT>91-94-1</ENT> <ENT>3,3′-Dichlorobenzidine</ENT> </ROW> <ROW> <ENT I="01">U074</ENT> <ENT>764-41-0</ENT> <ENT>2-Butene, 1,4-dichloro-(I,T)</ENT> </ROW> <ROW> <ENT I="01">U074</ENT> <ENT>764-41-0</ENT> <ENT>1,4-Dichloro-2-butene (I,T)</ENT> </ROW> <ROW> <ENT I="01">U075</ENT> <ENT>75-71-8</ENT> <ENT>Dichlorodifluoromethane</ENT> </ROW> <ROW> <ENT I="01">U075</ENT> <ENT>75-71-8</ENT> <ENT>Methane, dichlorodifluoro-</ENT> </ROW> <ROW> <ENT I="01">U076</ENT> <ENT>75-34-3</ENT> <ENT>Ethane, 1,1-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U076</ENT> <ENT>75-34-3</ENT> <ENT>Ethylidene dichloride</ENT> </ROW> <ROW> <ENT I="01">U077</ENT> <ENT>107-06-2</ENT> <ENT>Ethane, 1,2-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U077</ENT> <ENT>107-06-2</ENT> <ENT>Ethylene dichloride</ENT> </ROW> <ROW> <ENT I="01">U078</ENT> <ENT>75-35-4</ENT> <ENT>1,1-Dichloroethylene</ENT> </ROW> <ROW> <ENT I="01">U078</ENT> <ENT>75-35-4</ENT> <ENT>Ethene, 1,1-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U079</ENT> <ENT>156-60-5</ENT> <ENT>1,2-Dichloroethylene</ENT> </ROW> <ROW> <ENT I="01">U079</ENT> <ENT>156-60-5</ENT> <ENT>Ethene, 1,2-dichloro-, (E)-</ENT> </ROW> <ROW> <ENT I="01">U080</ENT> <ENT>75-09-2</ENT> <ENT>Methane, dichloro-</ENT> </ROW> <ROW> <ENT I="01">U080</ENT> <ENT>75-09-2</ENT> <ENT>Methylene chloride</ENT> </ROW> <ROW> <ENT I="01">U081</ENT> <ENT>120-83-2</ENT> <ENT>2,4-Dichlorophenol</ENT> </ROW> <ROW> <ENT I="01">U081</ENT> <ENT>120-83-2</ENT> <ENT>Phenol, 2,4-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U082</ENT> <ENT>87-65-0</ENT> <ENT>2,6-Dichlorophenol</ENT> </ROW> <ROW> <ENT I="01">U082</ENT> <ENT>87-65-0</ENT> <ENT>Phenol, 2,6-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U083</ENT> <ENT>78-87-5</ENT> <ENT>Propane, 1,2-dichloro-</ENT> </ROW> <ROW> <PRTPAGE P="92"/> <ENT I="01">U083</ENT> <ENT>78-87-5</ENT> <ENT>Propylene dichloride</ENT> </ROW> <ROW> <ENT I="01">U084</ENT> <ENT>542-75-6</ENT> <ENT>1,3-Dichloropropene</ENT> </ROW> <ROW> <ENT I="01">U084</ENT> <ENT>542-75-6</ENT> <ENT>1-Propene, 1,3-dichloro-</ENT> </ROW> <ROW> <ENT I="01">U085</ENT> <ENT>1464-53-5</ENT> <ENT>2,2′-Bioxirane</ENT> </ROW> <ROW> <ENT I="01">U085</ENT> <ENT>1464-53-5</ENT> <ENT>1,2:3,4-Diepoxybutane (I,T)</ENT> </ROW> <ROW> <ENT I="01">U086</ENT> <ENT>1615-80-1</ENT> <ENT>N,N′-Diethylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U086</ENT> <ENT>1615-80-1</ENT> <ENT>Hydrazine, 1,2-diethyl-</ENT> </ROW> <ROW> <ENT I="01">U087</ENT> <ENT>3288-58-2</ENT> <ENT>O,O-Diethyl S-methyl dithiophosphate</ENT> </ROW> <ROW> <ENT I="01">U087</ENT> <ENT>3288-58-2</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-methyl ester</ENT> </ROW> <ROW> <ENT I="01">U088</ENT> <ENT>84-66-2</ENT> <ENT>1,2-Benzenedicarboxylic acid, diethyl ester</ENT> </ROW> <ROW> <ENT I="01">U088</ENT> <ENT>84-66-2</ENT> <ENT>Diethyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U089</ENT> <ENT>56-53-1</ENT> <ENT>Diethylstilbesterol</ENT> </ROW> <ROW> <ENT I="01">U089</ENT> <ENT>56-53-1</ENT> <ENT>Phenol, 4,4′-(1,2-diethyl-1,2-ethenediyl)bis-, (E)-</ENT> </ROW> <ROW> <ENT I="01">U090</ENT> <ENT>94-58-6</ENT> <ENT>1,3-Benzodioxole, 5-propyl-</ENT> </ROW> <ROW> <ENT I="01">U090</ENT> <ENT>94-58-6</ENT> <ENT>Dihydrosafrole</ENT> </ROW> <ROW> <ENT I="01">U091</ENT> <ENT>119-90-4</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethoxy-</ENT> </ROW> <ROW> <ENT I="01">U091</ENT> <ENT>119-90-4</ENT> <ENT>3,3′-Dimethoxybenzidine</ENT> </ROW> <ROW> <ENT I="01">U092</ENT> <ENT>124-40-3</ENT> <ENT>Dimethylamine (I)</ENT> </ROW> <ROW> <ENT I="01">U092</ENT> <ENT>124-40-3</ENT> <ENT>Methanamine, -methyl-(I)</ENT> </ROW> <ROW> <ENT I="01">U093</ENT> <ENT>60-11-7</ENT> <ENT>Benzenamine, N,N-dimethyl-4-(phenylazo)-</ENT> </ROW> <ROW> <ENT I="01">U093</ENT> <ENT>60-11-7</ENT> <ENT>p-Dimethylaminoazobenzene</ENT> </ROW> <ROW> <ENT I="01">U094</ENT> <ENT>57-97-6</ENT> <ENT>Benz[a]anthracene, 7,12-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U094</ENT> <ENT>57-97-6</ENT> <ENT>7,12-Dimethylbenz[a]anthracene</ENT> </ROW> <ROW> <ENT I="01">U095</ENT> <ENT>119-93-7</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U095</ENT> <ENT>119-93-7</ENT> <ENT>3,3′-Dimethylbenzidine</ENT> </ROW> <ROW> <ENT I="01">U096</ENT> <ENT>80-15-9</ENT> <ENT>alpha,alpha-Dimethylbenzylhydroperoxide (R)</ENT> </ROW> <ROW> <ENT I="01">U096</ENT> <ENT>80-15-9</ENT> <ENT>Hydroperoxide, 1-methyl-1-phenylethyl-(R)</ENT> </ROW> <ROW> <ENT I="01">U097</ENT> <ENT>79-44-7</ENT> <ENT>Carbamic chloride, dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U097</ENT> <ENT>79-44-7</ENT> <ENT>Dimethylcarbamoyl chloride</ENT> </ROW> <ROW> <ENT I="01">U098</ENT> <ENT>57-14-7</ENT> <ENT>1,1-Dimethylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U098</ENT> <ENT>57-14-7</ENT> <ENT>Hydrazine, 1,1-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U099</ENT> <ENT>540-73-8</ENT> <ENT>1,2-Dimethylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U099</ENT> <ENT>540-73-8</ENT> <ENT>Hydrazine, 1,2-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U101</ENT> <ENT>105-67-9</ENT> <ENT>2,4-Dimethylphenol</ENT> </ROW> <ROW> <ENT I="01">U101</ENT> <ENT>105-67-9</ENT> <ENT>Phenol, 2,4-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U102</ENT> <ENT>131-11-3</ENT> <ENT>1,2-Benzenedicarboxylic acid, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U102</ENT> <ENT>131-11-3</ENT> <ENT>Dimethyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U103</ENT> <ENT>77-78-1</ENT> <ENT>Dimethyl sulfate</ENT> </ROW> <ROW> <ENT I="01">U103</ENT> <ENT>77-78-1</ENT> <ENT>Sulfuric acid, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U105</ENT> <ENT>121-14-2</ENT> <ENT>Benzene, 1-methyl-2,4-dinitro-</ENT> </ROW> <ROW> <ENT I="01">U105</ENT> <ENT>121-14-2</ENT> <ENT>2,4-Dinitrotoluene</ENT> </ROW> <ROW> <ENT I="01">U106</ENT> <ENT>606-20-2</ENT> <ENT>Benzene, 2-methyl-1,3-dinitro-</ENT> </ROW> <ROW> <ENT I="01">U106</ENT> <ENT>606-20-2</ENT> <ENT>2,6-Dinitrotoluene</ENT> </ROW> <ROW> <ENT I="01">U107</ENT> <ENT>117-84-0</ENT> <ENT>1,2-Benzenedicarboxylic acid, dioctyl ester</ENT> </ROW> <ROW> <ENT I="01">U107</ENT> <ENT>117-84-0</ENT> <ENT>Di-n-octyl phthalate</ENT> </ROW> <ROW> <ENT I="01">U108</ENT> <ENT>123-91-1</ENT> <ENT>1,4-Diethyleneoxide</ENT> </ROW> <ROW> <ENT I="01">U108</ENT> <ENT>123-91-1</ENT> <ENT>1,4-Dioxane</ENT> </ROW> <ROW> <ENT I="01">U109</ENT> <ENT>122-66-7</ENT> <ENT>1,2-Diphenylhydrazine</ENT> </ROW> <ROW> <ENT I="01">U109</ENT> <ENT>122-66-7</ENT> <ENT>Hydrazine, 1,2-diphenyl-</ENT> </ROW> <ROW> <ENT I="01">U110</ENT> <ENT>142-84-7</ENT> <ENT>Dipropylamine (I)</ENT> </ROW> <ROW> <ENT I="01">U110</ENT> <ENT>142-84-7</ENT> <ENT>1-Propanamine, N-propyl-(I)</ENT> </ROW> <ROW> <ENT I="01">U111</ENT> <ENT>621-64-7</ENT> <ENT>Di-n-propylnitrosamine</ENT> </ROW> <ROW> <ENT I="01">U111</ENT> <ENT>621-64-7</ENT> <ENT>1-Propanamine, N-nitroso-N-propyl-</ENT> </ROW> <ROW> <ENT I="01">U112</ENT> <ENT>141-78-6</ENT> <ENT>Acetic acid ethyl ester (I)</ENT> </ROW> <ROW> <ENT I="01">U112</ENT> <ENT>141-78-6</ENT> <ENT>Ethyl acetate (I)</ENT> </ROW> <ROW> <ENT I="01">U113</ENT> <ENT>140-88-5</ENT> <ENT>Ethyl acrylate (I)</ENT> </ROW> <ROW> <ENT I="01">U113</ENT> <ENT>140-88-5</ENT> <ENT>2-Propenoic acid, ethyl ester (I)</ENT> </ROW> <ROW> <ENT I="01">U114</ENT> <ENT> <SU>1</SU>111-54-6</ENT> <ENT>Carbamodithioic acid, 1,2-ethanediylbis-, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U114</ENT> <ENT> <SU>1</SU>111-54-6</ENT> <ENT>Ethylenebisdithiocarbamic acid, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U115</ENT> <ENT>75-21-8</ENT> <ENT>Ethylene oxide (I,T)</ENT> </ROW> <ROW> <ENT I="01">U115</ENT> <ENT>75-21-8</ENT> <ENT>Oxirane (I,T)</ENT> </ROW> <ROW> <ENT I="01">U116</ENT> <ENT>96-45-7</ENT> <ENT>Ethylenethiourea</ENT> </ROW> <ROW> <ENT I="01">U116</ENT> <ENT>96-45-7</ENT> <ENT>2-Imidazolidinethione</ENT> </ROW> <ROW> <ENT I="01">U117</ENT> <ENT>60-29-7</ENT> <ENT>Ethane, 1,1′-oxybis-(I)</ENT> </ROW> <ROW> <ENT I="01">U117</ENT> <ENT>60-29-7</ENT> <ENT>Ethyl ether (I)</ENT> </ROW> <ROW> <ENT I="01">U118</ENT> <ENT>97-63-2</ENT> <ENT>Ethyl methacrylate</ENT> </ROW> <ROW> <ENT I="01">U118</ENT> <ENT>97-63-2</ENT> <ENT>2-Propenoic acid, 2-methyl-, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U119</ENT> <ENT>62-50-0</ENT> <ENT>Ethyl methanesulfonate</ENT> </ROW> <ROW> <ENT I="01">U119</ENT> <ENT>62-50-0</ENT> <ENT>Methanesulfonic acid, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U120</ENT> <ENT>206-44-0</ENT> <ENT>Fluoranthene</ENT> </ROW> <ROW> <ENT I="01">U121</ENT> <ENT>75-69-4</ENT> <ENT>Methane, trichlorofluoro-</ENT> </ROW> <ROW> <ENT I="01">U121</ENT> <ENT>75-69-4</ENT> <ENT>Trichloromonofluoromethane</ENT> </ROW> <ROW> <PRTPAGE P="93"/> <ENT I="01">U122</ENT> <ENT>50-00-0</ENT> <ENT>Formaldehyde</ENT> </ROW> <ROW> <ENT I="01">U123</ENT> <ENT>64-18-6</ENT> <ENT>Formic acid (C,T)</ENT> </ROW> <ROW> <ENT I="01">U124</ENT> <ENT>110-00-9</ENT> <ENT>Furan (I)</ENT> </ROW> <ROW> <ENT I="01">U124</ENT> <ENT>110-00-9</ENT> <ENT>Furfuran (I)</ENT> </ROW> <ROW> <ENT I="01">U125</ENT> <ENT>98-01-1</ENT> <ENT>2-Furancarboxaldehyde (I)</ENT> </ROW> <ROW> <ENT I="01">U125</ENT> <ENT>98-01-1</ENT> <ENT>Furfural (I)</ENT> </ROW> <ROW> <ENT I="01">U126</ENT> <ENT>765-34-4</ENT> <ENT>Glycidylaldehyde</ENT> </ROW> <ROW> <ENT I="01">U126</ENT> <ENT>765-34-4</ENT> <ENT>Oxiranecarboxyaldehyde</ENT> </ROW> <ROW> <ENT I="01">U127</ENT> <ENT>118-74-1</ENT> <ENT>Benzene, hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U127</ENT> <ENT>118-74-1</ENT> <ENT>Hexachlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U128</ENT> <ENT>87-68-3</ENT> <ENT>1,3-Butadiene, 1,1,2,3,4,4-hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U128</ENT> <ENT>87-68-3</ENT> <ENT>Hexachlorobutadiene</ENT> </ROW> <ROW> <ENT I="01">U129</ENT> <ENT>58-89-9</ENT> <ENT>Cyclohexane, 1,2,3,4,5,6-hexachloro-, (1alpha,2alpha,3beta,4alpha,5alpha,6beta)-</ENT> </ROW> <ROW> <ENT I="01">U129</ENT> <ENT>58-89-9</ENT> <ENT>Lindane</ENT> </ROW> <ROW> <ENT I="01">U130</ENT> <ENT>77-47-4</ENT> <ENT>1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U130</ENT> <ENT>77-47-4</ENT> <ENT>Hexachlorocyclopentadiene</ENT> </ROW> <ROW> <ENT I="01">U131</ENT> <ENT>67-72-1</ENT> <ENT>Ethane, hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U131</ENT> <ENT>67-72-1</ENT> <ENT>Hexachloroethane</ENT> </ROW> <ROW> <ENT I="01">U132</ENT> <ENT>70-30-4</ENT> <ENT>Hexachlorophene</ENT> </ROW> <ROW> <ENT I="01">U132</ENT> <ENT>70-30-4</ENT> <ENT>Phenol, 2,2′-methylenebis[3,4,6-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U133</ENT> <ENT>302-01-2</ENT> <ENT>Hydrazine (R,T)</ENT> </ROW> <ROW> <ENT I="01">U134</ENT> <ENT>7664-39-3</ENT> <ENT>Hydrofluoric acid (C,T)</ENT> </ROW> <ROW> <ENT I="01">U134</ENT> <ENT>7664-39-3</ENT> <ENT>Hydrogen fluoride (C,T)</ENT> </ROW> <ROW> <ENT I="01">U135</ENT> <ENT>7783-06-4</ENT> <ENT>Hydrogen sulfide</ENT> </ROW> <ROW> <ENT I="01">U135</ENT> <ENT>7783-06-4</ENT> <ENT>Hydrogen sulfide H<E T="52">2</E>S</ENT> </ROW> <ROW> <ENT I="01">U136</ENT> <ENT>75-60-5</ENT> <ENT>Arsinic acid, dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U136</ENT> <ENT>75-60-5</ENT> <ENT>Cacodylic acid</ENT> </ROW> <ROW> <ENT I="01">U137</ENT> <ENT>193-39-5</ENT> <ENT>Indeno[1,2,3-cd]pyrene</ENT> </ROW> <ROW> <ENT I="01">U138</ENT> <ENT>74-88-4</ENT> <ENT>Methane, iodo-</ENT> </ROW> <ROW> <ENT I="01">U138</ENT> <ENT>74-88-4</ENT> <ENT>Methyl iodide</ENT> </ROW> <ROW> <ENT I="01">U140</ENT> <ENT>78-83-1</ENT> <ENT>Isobutyl alcohol (I,T)</ENT> </ROW> <ROW> <ENT I="01">U140</ENT> <ENT>78-83-1</ENT> <ENT>1-Propanol, 2-methyl- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U141</ENT> <ENT>120-58-1</ENT> <ENT>1,3-Benzodioxole, 5-(1-propenyl)-</ENT> </ROW> <ROW> <ENT I="01">U141</ENT> <ENT>120-58-1</ENT> <ENT>Isosafrole</ENT> </ROW> <ROW> <ENT I="01">U142</ENT> <ENT>143-50-0</ENT> <ENT>Kepone</ENT> </ROW> <ROW> <ENT I="01">U142</ENT> <ENT>143-50-0</ENT> <ENT>1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1,1a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-</ENT> </ROW> <ROW> <ENT I="01">U143</ENT> <ENT>303-34-4</ENT> <ENT>2-Butenoic acid, 2-methyl-, 7-[[2,3-dihydroxy-2-(1-methoxyethyl)-3-methyl-1-oxobutoxy]methyl]-2,3,5,7a-tetrahydro-1H-pyrrolizin-1-yl ester, [1S-[1alpha(Z),7(2S*,3R*),7aalpha]]-</ENT> </ROW> <ROW> <ENT I="01">U143</ENT> <ENT>303-34-4</ENT> <ENT>Lasiocarpine</ENT> </ROW> <ROW> <ENT I="01">U144</ENT> <ENT>301-04-2</ENT> <ENT>Acetic acid, lead(2+) salt</ENT> </ROW> <ROW> <ENT I="01">U144</ENT> <ENT>301-04-2</ENT> <ENT>Lead acetate</ENT> </ROW> <ROW> <ENT I="01">U145</ENT> <ENT>7446-27-7</ENT> <ENT>Lead phosphate</ENT> </ROW> <ROW> <ENT I="01">U145</ENT> <ENT>7446-27-7</ENT> <ENT>Phosphoric acid, lead(2+) salt (2:3)</ENT> </ROW> <ROW> <ENT I="01">U146</ENT> <ENT>1335-32-6</ENT> <ENT>Lead, bis(acetato-O)tetrahydroxytri-</ENT> </ROW> <ROW> <ENT I="01">U146</ENT> <ENT>1335-32-6</ENT> <ENT>Lead subacetate</ENT> </ROW> <ROW> <ENT I="01">U147</ENT> <ENT>108-31-6</ENT> <ENT>2,5-Furandione</ENT> </ROW> <ROW> <ENT I="01">U147</ENT> <ENT>108-31-6</ENT> <ENT>Maleic anhydride</ENT> </ROW> <ROW> <ENT I="01">U148</ENT> <ENT>123-33-1</ENT> <ENT>Maleic hydrazide</ENT> </ROW> <ROW> <ENT I="01">U148</ENT> <ENT>123-33-1</ENT> <ENT>3,6-Pyridazinedione, 1,2-dihydro-</ENT> </ROW> <ROW> <ENT I="01">U149</ENT> <ENT>109-77-3</ENT> <ENT>Malononitrile</ENT> </ROW> <ROW> <ENT I="01">U149</ENT> <ENT>109-77-3</ENT> <ENT>Propanedinitrile</ENT> </ROW> <ROW> <ENT I="01">U150</ENT> <ENT>148-82-3</ENT> <ENT>Melphalan</ENT> </ROW> <ROW> <ENT I="01">U150</ENT> <ENT>148-82-3</ENT> <ENT>L-Phenylalanine, 4-[bis(2-chloroethyl)amino]-</ENT> </ROW> <ROW> <ENT I="01">U151</ENT> <ENT>7439-97-6</ENT> <ENT>Mercury</ENT> </ROW> <ROW> <ENT I="01">U152</ENT> <ENT>126-98-7</ENT> <ENT>Methacrylonitrile (I,T)</ENT> </ROW> <ROW> <ENT I="01">U152</ENT> <ENT>126-98-7</ENT> <ENT>2-Propenenitrile, 2-methyl- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U153</ENT> <ENT>74-93-1</ENT> <ENT>Methanethiol (I,T)</ENT> </ROW> <ROW> <ENT I="01">U153</ENT> <ENT>74-93-1</ENT> <ENT>Thiomethanol (I,T)</ENT> </ROW> <ROW> <ENT I="01">U154</ENT> <ENT>67-56-1</ENT> <ENT>Methanol (I)</ENT> </ROW> <ROW> <ENT I="01">U154</ENT> <ENT>67-56-1</ENT> <ENT>Methyl alcohol (I)</ENT> </ROW> <ROW> <ENT I="01">U155</ENT> <ENT>91-80-5</ENT> <ENT>1,2-Ethanediamine, N,N-dimethyl-N′-2-pyridinyl-N′-(2-thienylmethyl)-</ENT> </ROW> <ROW> <ENT I="01">U155</ENT> <ENT>91-80-5</ENT> <ENT>Methapyrilene</ENT> </ROW> <ROW> <ENT I="01">U156</ENT> <ENT>79-22-1</ENT> <ENT>Carbonochloridic acid, methyl ester (I,T)</ENT> </ROW> <ROW> <ENT I="01">U156</ENT> <ENT>79-22-1</ENT> <ENT>Methyl chlorocarbonate (I,T)</ENT> </ROW> <ROW> <ENT I="01">U157</ENT> <ENT>56-49-5</ENT> <ENT>Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-</ENT> </ROW> <ROW> <ENT I="01">U157</ENT> <ENT>56-49-5</ENT> <ENT>3-Methylcholanthrene</ENT> </ROW> <ROW> <ENT I="01">U158</ENT> <ENT>101-14-4</ENT> <ENT>Benzenamine, 4,4′-methylenebis[2-chloro-</ENT> </ROW> <ROW> <ENT I="01">U158</ENT> <ENT>101-14-4</ENT> <ENT>4,4′-Methylenebis(2-chloroaniline)</ENT> </ROW> <ROW> <ENT I="01">U159</ENT> <ENT>78-93-3</ENT> <ENT>2-Butanone (I,T)</ENT> </ROW> <ROW> <ENT I="01">U159</ENT> <ENT>78-93-3</ENT> <ENT>Methyl ethyl ketone (MEK) (I,T)</ENT> </ROW> <ROW> <ENT I="01">U160</ENT> <ENT>1338-23-4</ENT> <ENT>2-Butanone, peroxide (R,T)</ENT> </ROW> <ROW> <ENT I="01">U160</ENT> <ENT>1338-23-4</ENT> <ENT>Methyl ethyl ketone peroxide (R,T)</ENT> </ROW> <ROW> <PRTPAGE P="94"/> <ENT I="01">U161</ENT> <ENT>108-10-1</ENT> <ENT>Methyl isobutyl ketone (I)</ENT> </ROW> <ROW> <ENT I="01">U161</ENT> <ENT>108-10-1</ENT> <ENT>4-Methyl-2-pentanone (I)</ENT> </ROW> <ROW> <ENT I="01">U161</ENT> <ENT>108-10-1</ENT> <ENT>Pentanol, 4-methyl-</ENT> </ROW> <ROW> <ENT I="01">U162</ENT> <ENT>80-62-6</ENT> <ENT>Methyl methacrylate (I,T)</ENT> </ROW> <ROW> <ENT I="01">U162</ENT> <ENT>80-62-6</ENT> <ENT>2-Propenoic acid, 2-methyl-, methyl ester (I,T)</ENT> </ROW> <ROW> <ENT I="01">U163</ENT> <ENT>70-25-7</ENT> <ENT>Guanidine, -methyl-N'-nitro-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U163</ENT> <ENT>70-25-7</ENT> <ENT>MNNG</ENT> </ROW> <ROW> <ENT I="01">U164</ENT> <ENT>56-04-2</ENT> <ENT>Methylthiouracil</ENT> </ROW> <ROW> <ENT I="01">U164</ENT> <ENT>56-04-2</ENT> <ENT>4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-</ENT> </ROW> <ROW> <ENT I="01">U165</ENT> <ENT>91-20-3</ENT> <ENT>Naphthalene</ENT> </ROW> <ROW> <ENT I="01">U166</ENT> <ENT>130-15-4</ENT> <ENT>1,4-Naphthalenedione</ENT> </ROW> <ROW> <ENT I="01">U166</ENT> <ENT>130-15-4</ENT> <ENT>1,4-Naphthoquinone</ENT> </ROW> <ROW> <ENT I="01">U167</ENT> <ENT>134-32-7</ENT> <ENT>1-Naphthalenamine</ENT> </ROW> <ROW> <ENT I="01">U167</ENT> <ENT>134-32-7</ENT> <ENT>alpha-Naphthylamine</ENT> </ROW> <ROW> <ENT I="01">U168</ENT> <ENT>91-59-8</ENT> <ENT>2-Naphthalenamine</ENT> </ROW> <ROW> <ENT I="01">U168</ENT> <ENT>91-59-8</ENT> <ENT>beta-Naphthylamine</ENT> </ROW> <ROW> <ENT I="01">U169</ENT> <ENT>98-95-3</ENT> <ENT>Benzene, nitro-</ENT> </ROW> <ROW> <ENT I="01">U169</ENT> <ENT>98-95-3</ENT> <ENT>Nitrobenzene (I,T)</ENT> </ROW> <ROW> <ENT I="01">U170</ENT> <ENT>100-02-7</ENT> <ENT>p-Nitrophenol</ENT> </ROW> <ROW> <ENT I="01">U170</ENT> <ENT>100-02-7</ENT> <ENT>Phenol, 4-nitro-</ENT> </ROW> <ROW> <ENT I="01">U171</ENT> <ENT>79-46-9</ENT> <ENT>2-Nitropropane (I,T)</ENT> </ROW> <ROW> <ENT I="01">U171</ENT> <ENT>79-46-9</ENT> <ENT>Propane, 2-nitro- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U172</ENT> <ENT>924-16-3</ENT> <ENT>1-Butanamine, N-butyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U172</ENT> <ENT>924-16-3</ENT> <ENT>N-Nitrosodi-n-butylamine</ENT> </ROW> <ROW> <ENT I="01">U173</ENT> <ENT>1116-54-7</ENT> <ENT>Ethanol, 2,2′-(nitrosoimino)bis-</ENT> </ROW> <ROW> <ENT I="01">U173</ENT> <ENT>1116-54-7</ENT> <ENT>N-Nitrosodiethanolamine</ENT> </ROW> <ROW> <ENT I="01">U174</ENT> <ENT>55-18-5</ENT> <ENT>Ethanamine, -ethyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U174</ENT> <ENT>55-18-5</ENT> <ENT>N-Nitrosodiethylamine</ENT> </ROW> <ROW> <ENT I="01">U176</ENT> <ENT>759-73-9</ENT> <ENT>N-Nitroso-N-ethylurea</ENT> </ROW> <ROW> <ENT I="01">U176</ENT> <ENT>759-73-9</ENT> <ENT>Urea, N-ethyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U177</ENT> <ENT>684-93-5</ENT> <ENT>N-Nitroso-N-methylurea</ENT> </ROW> <ROW> <ENT I="01">U177</ENT> <ENT>684-93-5</ENT> <ENT>Urea, N-methyl-N-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U178</ENT> <ENT>615-53-2</ENT> <ENT>Carbamic acid, methylnitroso-, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U178</ENT> <ENT>615-53-2</ENT> <ENT>N-Nitroso-N-methylurethane</ENT> </ROW> <ROW> <ENT I="01">U179</ENT> <ENT>100-75-4</ENT> <ENT>N-Nitrosopiperidine</ENT> </ROW> <ROW> <ENT I="01">U179</ENT> <ENT>100-75-4</ENT> <ENT>Piperidine, 1-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U180</ENT> <ENT>930-55-2</ENT> <ENT>N-Nitrosopyrrolidine</ENT> </ROW> <ROW> <ENT I="01">U180</ENT> <ENT>930-55-2</ENT> <ENT>Pyrrolidine, 1-nitroso-</ENT> </ROW> <ROW> <ENT I="01">U181</ENT> <ENT>99-55-8</ENT> <ENT>Benzenamine, 2-methyl-5-nitro-</ENT> </ROW> <ROW> <ENT I="01">U181</ENT> <ENT>99-55-8</ENT> <ENT>5-Nitro-o-toluidine</ENT> </ROW> <ROW> <ENT I="01">U182</ENT> <ENT>123-63-7</ENT> <ENT>1,3,5-Trioxane, 2,4,6-trimethyl-</ENT> </ROW> <ROW> <ENT I="01">U182</ENT> <ENT>123-63-7</ENT> <ENT>Paraldehyde</ENT> </ROW> <ROW> <ENT I="01">U183</ENT> <ENT>608-93-5</ENT> <ENT>Benzene, pentachloro-</ENT> </ROW> <ROW> <ENT I="01">U183</ENT> <ENT>608-93-5</ENT> <ENT>Pentachlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U184</ENT> <ENT>76-01-7</ENT> <ENT>Ethane, pentachloro-</ENT> </ROW> <ROW> <ENT I="01">U184</ENT> <ENT>76-01-7</ENT> <ENT>Pentachloroethane</ENT> </ROW> <ROW> <ENT I="01">U185</ENT> <ENT>82-68-8</ENT> <ENT>Benzene, pentachloronitro-</ENT> </ROW> <ROW> <ENT I="01">U185</ENT> <ENT>82-68-8</ENT> <ENT>Pentachloronitrobenzene (PCNB)</ENT> </ROW> <ROW> <ENT I="01">U186</ENT> <ENT>504-60-9</ENT> <ENT>1-Methylbutadiene (I)</ENT> </ROW> <ROW> <ENT I="01">U186</ENT> <ENT>504-60-9</ENT> <ENT>1,3-Pentadiene (I)</ENT> </ROW> <ROW> <ENT I="01">U187</ENT> <ENT>62-44-2</ENT> <ENT>Acetamide, -(4-ethoxyphenyl)-</ENT> </ROW> <ROW> <ENT I="01">U187</ENT> <ENT>62-44-2</ENT> <ENT>Phenacetin</ENT> </ROW> <ROW> <ENT I="01">U188</ENT> <ENT>108-95-2</ENT> <ENT>Phenol</ENT> </ROW> <ROW> <ENT I="01">U189</ENT> <ENT>1314-80-3</ENT> <ENT>Phosphorus sulfide (R)</ENT> </ROW> <ROW> <ENT I="01">U189</ENT> <ENT>1314-80-3</ENT> <ENT>Sulfur phosphide (R)</ENT> </ROW> <ROW> <ENT I="01">U190</ENT> <ENT>85-44-9</ENT> <ENT>1,3-Isobenzofurandione</ENT> </ROW> <ROW> <ENT I="01">U190</ENT> <ENT>85-44-9</ENT> <ENT>Phthalic anhydride</ENT> </ROW> <ROW> <ENT I="01">U191</ENT> <ENT>109-06-8</ENT> <ENT>2-Picoline</ENT> </ROW> <ROW> <ENT I="01">U191</ENT> <ENT>109-06-8</ENT> <ENT>Pyridine, 2-methyl-</ENT> </ROW> <ROW> <ENT I="01">U192</ENT> <ENT>23950-58-5</ENT> <ENT>Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)-</ENT> </ROW> <ROW> <ENT I="01">U192</ENT> <ENT>23950-58-5</ENT> <ENT>Pronamide</ENT> </ROW> <ROW> <ENT I="01">U193</ENT> <ENT>1120-71-4</ENT> <ENT>1,2-Oxathiolane, 2,2-dioxide</ENT> </ROW> <ROW> <ENT I="01">U193</ENT> <ENT>1120-71-4</ENT> <ENT>1,3-Propane sultone</ENT> </ROW> <ROW> <ENT I="01">U194</ENT> <ENT>107-10-8</ENT> <ENT>1-Propanamine (I,T)</ENT> </ROW> <ROW> <ENT I="01">U194</ENT> <ENT>107-10-8</ENT> <ENT>n-Propylamine (I,T)</ENT> </ROW> <ROW> <ENT I="01">U196</ENT> <ENT>110-86-1</ENT> <ENT>Pyridine</ENT> </ROW> <ROW> <ENT I="01">U197</ENT> <ENT>106-51-4</ENT> <ENT>p-Benzoquinone</ENT> </ROW> <ROW> <ENT I="01">U197</ENT> <ENT>106-51-4</ENT> <ENT>2,5-Cyclohexadiene-1,4-dione</ENT> </ROW> <ROW> <ENT I="01">U200</ENT> <ENT>50-55-5</ENT> <ENT>Reserpine</ENT> </ROW> <ROW> <ENT I="01">U200</ENT> <ENT>50-55-5</ENT> <ENT>Yohimban-16-carboxylic acid, 11,17-dimethoxy-18-[(3,4,5-trimethoxybenzoyl)oxy]-, methyl ester,(3beta,16beta,17alpha,18beta,20alpha)-</ENT> </ROW> <ROW> <ENT I="01">U201</ENT> <ENT>108-46-3</ENT> <ENT>1,3-Benzenediol</ENT> </ROW> <ROW> <PRTPAGE P="95"/> <ENT I="01">U201</ENT> <ENT>108-46-3</ENT> <ENT>Resorcinol</ENT> </ROW> <ROW> <ENT I="01">U202</ENT> <ENT>181-07-2</ENT> <ENT>1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide, & salts</ENT> </ROW> <ROW> <ENT I="01">U202</ENT> <ENT>181-07-2</ENT> <ENT>Saccharin, & salts</ENT> </ROW> <ROW> <ENT I="01">U203</ENT> <ENT>94-59-7</ENT> <ENT>1,3-Benzodioxole, 5-(2-propenyl)-</ENT> </ROW> <ROW> <ENT I="01">U203</ENT> <ENT>94-59-7</ENT> <ENT>Safrole</ENT> </ROW> <ROW> <ENT I="01">U204</ENT> <ENT>7783-00-8</ENT> <ENT>Selenious acid</ENT> </ROW> <ROW> <ENT I="01">U204</ENT> <ENT>7783-00-8</ENT> <ENT>Selenium dioxide</ENT> </ROW> <ROW> <ENT I="01">U205</ENT> <ENT>7488-56-4</ENT> <ENT>Selenium sulfide</ENT> </ROW> <ROW> <ENT I="01">U205</ENT> <ENT>7488-56-4</ENT> <ENT>Selenium sulfide SeS<E T="52">2</E> (R,T)</ENT> </ROW> <ROW> <ENT I="01">U206</ENT> <ENT>18883-66-4</ENT> <ENT>Glucopyranose, 2-deoxy-2-(3-methyl-3-nitrosoureido)-, D-</ENT> </ROW> <ROW> <ENT I="01">U206</ENT> <ENT>18883-66-4</ENT> <ENT>D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)-carbonyl]amino]-</ENT> </ROW> <ROW> <ENT I="01">U206</ENT> <ENT>18883-66-4</ENT> <ENT>Streptozotocin</ENT> </ROW> <ROW> <ENT I="01">U207</ENT> <ENT>95-94-3</ENT> <ENT>Benzene, 1,2,4,5-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U207</ENT> <ENT>95-94-3</ENT> <ENT>1,2,4,5-Tetrachlorobenzene</ENT> </ROW> <ROW> <ENT I="01">U208</ENT> <ENT>630-20-6</ENT> <ENT>Ethane, 1,1,1,2-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U208</ENT> <ENT>630-20-6</ENT> <ENT>1,1,1,2-Tetrachloroethane</ENT> </ROW> <ROW> <ENT I="01">U209</ENT> <ENT>79-34-5</ENT> <ENT>Ethane, 1,1,2,2-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U209</ENT> <ENT>79-34-5</ENT> <ENT>1,1,2,2-Tetrachloroethane</ENT> </ROW> <ROW> <ENT I="01">U210</ENT> <ENT>127-18-4</ENT> <ENT>Ethene, tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U210</ENT> <ENT>127-18-4</ENT> <ENT>Tetrachloroethylene</ENT> </ROW> <ROW> <ENT I="01">U211</ENT> <ENT>56-23-5</ENT> <ENT>Carbon tetrachloride</ENT> </ROW> <ROW> <ENT I="01">U211</ENT> <ENT>56-23-5</ENT> <ENT>Methane, tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">U213</ENT> <ENT>109-99-9</ENT> <ENT>Furan, tetrahydro-(I)</ENT> </ROW> <ROW> <ENT I="01">U213</ENT> <ENT>109-99-9</ENT> <ENT>Tetrahydrofuran (I)</ENT> </ROW> <ROW> <ENT I="01">U214</ENT> <ENT>563-68-8</ENT> <ENT>Acetic acid, thallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">U214</ENT> <ENT>563-68-8</ENT> <ENT>Thallium(I) acetate</ENT> </ROW> <ROW> <ENT I="01">U215</ENT> <ENT>6533-73-9</ENT> <ENT>Carbonic acid, dithallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">U215</ENT> <ENT>6533-73-9</ENT> <ENT>Thallium(I) carbonate</ENT> </ROW> <ROW> <ENT I="01">U216</ENT> <ENT>7791-12-0</ENT> <ENT>Thallium(I) chloride</ENT> </ROW> <ROW> <ENT I="01">U216</ENT> <ENT>7791-12-0</ENT> <ENT>Thallium chloride TlCl</ENT> </ROW> <ROW> <ENT I="01">U217</ENT> <ENT>10102-45-1</ENT> <ENT>Nitric acid, thallium(1+) salt</ENT> </ROW> <ROW> <ENT I="01">U217</ENT> <ENT>10102-45-1</ENT> <ENT>Thallium(I) nitrate</ENT> </ROW> <ROW> <ENT I="01">U218</ENT> <ENT>62-55-5</ENT> <ENT>Ethanethioamide</ENT> </ROW> <ROW> <ENT I="01">U218</ENT> <ENT>62-55-5</ENT> <ENT>Thioacetamide</ENT> </ROW> <ROW> <ENT I="01">U219</ENT> <ENT>62-56-6</ENT> <ENT>Thiourea</ENT> </ROW> <ROW> <ENT I="01">U220</ENT> <ENT>108-88-3</ENT> <ENT>Benzene, methyl-</ENT> </ROW> <ROW> <ENT I="01">U220</ENT> <ENT>108-88-3</ENT> <ENT>Toluene</ENT> </ROW> <ROW> <ENT I="01">U221</ENT> <ENT>25376-45-8</ENT> <ENT>Benzenediamine, ar-methyl-</ENT> </ROW> <ROW> <ENT I="01">U221</ENT> <ENT>25376-45-8</ENT> <ENT>Toluenediamine</ENT> </ROW> <ROW> <ENT I="01">U222</ENT> <ENT>636-21-5</ENT> <ENT>Benzenamine, 2-methyl-, hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U222</ENT> <ENT>636-21-5</ENT> <ENT>o-Toluidine hydrochloride</ENT> </ROW> <ROW> <ENT I="01">U223</ENT> <ENT>26471-62-5</ENT> <ENT>Benzene, 1,3-diisocyanatomethyl- (R,T)</ENT> </ROW> <ROW> <ENT I="01">U223</ENT> <ENT>26471-62-5</ENT> <ENT>Toluene diisocyanate (R,T)</ENT> </ROW> <ROW> <ENT I="01">U225</ENT> <ENT>75-25-2</ENT> <ENT>Bromoform</ENT> </ROW> <ROW> <ENT I="01">U225</ENT> <ENT>75-25-2</ENT> <ENT>Methane, tribromo-</ENT> </ROW> <ROW> <ENT I="01">U226</ENT> <ENT>71-55-6</ENT> <ENT>Ethane, 1,1,1-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U226</ENT> <ENT>71-55-6</ENT> <ENT>Methyl chloroform</ENT> </ROW> <ROW> <ENT I="01">U226</ENT> <ENT>71-55-6</ENT> <ENT>1,1,1-Trichloroethane</ENT> </ROW> <ROW> <ENT I="01">U227</ENT> <ENT>79-00-5</ENT> <ENT>Ethane, 1,1,2-trichloro-</ENT> </ROW> <ROW> <ENT I="01">U227</ENT> <ENT>79-00-5</ENT> <ENT>1,1,2-Trichloroethane</ENT> </ROW> <ROW> <ENT I="01">U228</ENT> <ENT>79-01-6</ENT> <ENT>Ethene, trichloro-</ENT> </ROW> <ROW> <ENT I="01">U228</ENT> <ENT>79-01-6</ENT> <ENT>Trichloroethylene</ENT> </ROW> <ROW> <ENT I="01">U234</ENT> <ENT>99-35-4</ENT> <ENT>Benzene, 1,3,5-trinitro-</ENT> </ROW> <ROW> <ENT I="01">U234</ENT> <ENT>99-35-4</ENT> <ENT>1,3,5-Trinitrobenzene (R,T)</ENT> </ROW> <ROW> <ENT I="01">U235</ENT> <ENT>126-72-7</ENT> <ENT>1-Propanol, 2,3-dibromo-, phosphate (3:1)</ENT> </ROW> <ROW> <ENT I="01">U235</ENT> <ENT>126-72-7</ENT> <ENT>Tris(2,3-dibromopropyl) phosphate</ENT> </ROW> <ROW> <ENT I="01">U236</ENT> <ENT>72-57-1</ENT> <ENT>2,7-Naphthalenedisulfonic acid, 3,3′-[(3,3′-dimethyl[1,1′-biphenyl]-4,4′-diyl)bis(azo)bis[5-amino-4-hydroxy]-, tetrasodium salt</ENT> </ROW> <ROW> <ENT I="01">U236</ENT> <ENT>72-57-1</ENT> <ENT>Trypan blue</ENT> </ROW> <ROW> <ENT I="01">U237</ENT> <ENT>66-75-1</ENT> <ENT>2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]-</ENT> </ROW> <ROW> <ENT I="01">U237</ENT> <ENT>66-75-1</ENT> <ENT>Uracil mustard</ENT> </ROW> <ROW> <ENT I="01">U238</ENT> <ENT>51-79-6</ENT> <ENT>Carbamic acid, ethyl ester</ENT> </ROW> <ROW> <ENT I="01">U238</ENT> <ENT>51-79-6</ENT> <ENT>Ethyl carbamate (urethane)</ENT> </ROW> <ROW> <ENT I="01">U239</ENT> <ENT>1330-20-7</ENT> <ENT>Benzene, dimethyl- (I,T)</ENT> </ROW> <ROW> <ENT I="01">U239</ENT> <ENT>1330-20-7</ENT> <ENT>Xylene (I)</ENT> </ROW> <ROW> <ENT I="01">U240</ENT> <ENT> <SU>1</SU> 94-75-7</ENT> <ENT>Acetic acid, (2,4-dichlorophenoxy)-, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U240</ENT> <ENT> <SU>1</SU> 94-75-7</ENT> <ENT>2,4-D, salts & esters</ENT> </ROW> <ROW> <ENT I="01">U243</ENT> <ENT>1888-71-7</ENT> <ENT>Hexachloropropene</ENT> </ROW> <ROW> <ENT I="01">U243</ENT> <ENT>1888-71-7</ENT> <ENT>1-Propene, 1,1,2,3,3,3-hexachloro-</ENT> </ROW> <ROW> <ENT I="01">U244</ENT> <ENT>137-26-8</ENT> <ENT>Thioperoxydicarbonic diamide [(H<E T="52">2</E>N)C(S)]<E T="52">2</E> S<E T="52">2</E>, tetramethyl-</ENT> </ROW> <ROW> <ENT I="01">U244</ENT> <ENT>137-26-8</ENT> <ENT>Thiram</ENT> </ROW> <ROW> <ENT I="01">U246</ENT> <ENT>506-68-3</ENT> <ENT>Cyanogen bromide (CN)Br</ENT> </ROW> <ROW> <PRTPAGE P="96"/> <ENT I="01">U247</ENT> <ENT>72-43-5</ENT> <ENT>Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4- methoxy-</ENT> </ROW> <ROW> <ENT I="01">U247</ENT> <ENT>72-43-5</ENT> <ENT>Methoxychlor</ENT> </ROW> <ROW> <ENT I="01">U248</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenyl-butyl)-, & salts, when present at concentrations of 0.3% or less</ENT> </ROW> <ROW> <ENT I="01">U248</ENT> <ENT> <SU>1</SU> 81-81-2</ENT> <ENT>Warfarin, & salts, when present at concentrations of 0.3% or less</ENT> </ROW> <ROW> <ENT I="01">U249</ENT> <ENT>1314-84-7</ENT> <ENT>Zinc phosphide Zn<E T="52">3</E> P<E T="52">2</E>, when present at concentrations of 10% or less</ENT> </ROW> <ROW> <ENT I="01">U271</ENT> <ENT>17804-35-2</ENT> <ENT>Benomyl</ENT> </ROW> <ROW> <ENT I="01">U271</ENT> <ENT>17804-35-2</ENT> <ENT>Carbamic acid, [1-[(butylamino)carbonyl]-1H-benzimidazol-2-yl]-, methyl ester</ENT> </ROW> <ROW> <ENT I="01">U278</ENT> <ENT>22781-23-3</ENT> <ENT>Bendiocarb</ENT> </ROW> <ROW> <ENT I="01">U278</ENT> <ENT>22781-23-3</ENT> <ENT>1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl carbamate</ENT> </ROW> <ROW> <ENT I="01">U279</ENT> <ENT>63-25-2</ENT> <ENT>Carbaryl</ENT> </ROW> <ROW> <ENT I="01">U279</ENT> <ENT>63-25-2</ENT> <ENT>1-Naphthalenol, methylcarbamate</ENT> </ROW> <ROW> <ENT I="01">U280</ENT> <ENT>101-27-9</ENT> <ENT>Barban</ENT> </ROW> <ROW> <ENT I="01">U280</ENT> <ENT>101-27-9</ENT> <ENT>Carbamic acid, (3-chlorophenyl)-, 4-chloro-2-butynyl ester</ENT> </ROW> <ROW> <ENT I="01">U328</ENT> <ENT>95-53-4</ENT> <ENT>Benzenamine, 2-methyl-</ENT> </ROW> <ROW> <ENT I="01">U328</ENT> <ENT>95-53-4</ENT> <ENT>o-Toluidine</ENT> </ROW> <ROW> <ENT I="01">U353</ENT> <ENT>106-49-0</ENT> <ENT>Benzenamine, 4-methyl-</ENT> </ROW> <ROW> <ENT I="01">U353</ENT> <ENT>106-49-0</ENT> <ENT>p-Toluidine</ENT> </ROW> <ROW> <ENT I="01">U359</ENT> <ENT>110-80-5</ENT> <ENT>Ethanol, 2-ethoxy-</ENT> </ROW> <ROW> <ENT I="01">U359</ENT> <ENT>110-80-5</ENT> <ENT>Ethylene glycol monoethyl ether</ENT> </ROW> <ROW> <ENT I="01">U364</ENT> <ENT>22961-82-6</ENT> <ENT>Bendiocarb phenol</ENT> </ROW> <ROW> <ENT I="01">U364</ENT> <ENT>22961-82-6</ENT> <ENT>1,3-Benzodioxol-4-ol, 2,2-dimethyl-,</ENT> </ROW> <ROW> <ENT I="01">U367</ENT> <ENT>1563-38-8</ENT> <ENT>7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-</ENT> </ROW> <ROW> <ENT I="01">U367</ENT> <ENT>1563-38-8</ENT> <ENT>Carbofuran phenol</ENT> </ROW> <ROW> <ENT I="01">U372</ENT> <ENT>10605-21-7</ENT> <ENT>Carbamic acid, 1H-benzimidazol-2-yl, methyl ester</ENT> </ROW> <ROW> <ENT I="01">U372</ENT> <ENT>10605-21-7</ENT> <ENT>Carbendazim</ENT> </ROW> <ROW> <ENT I="01">U373</ENT> <ENT>122-42-9</ENT> <ENT>Carbamic acid, phenyl-, 1-methylethyl ester</ENT> </ROW> <ROW> <ENT I="01">U373</ENT> <ENT>122-42-9</ENT> <ENT>Propham</ENT> </ROW> <ROW> <ENT I="01">U387</ENT> <ENT>52888-80-9</ENT> <ENT>Carbamothioic acid, dipropyl-, S-(phenylmethyl) ester</ENT> </ROW> <ROW> <ENT I="01">U387</ENT> <ENT>52888-80-9</ENT> <ENT>Prosulfocarb</ENT> </ROW> <ROW> <ENT I="01">U389</ENT> <ENT>2303-17-5</ENT> <ENT>Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3-trichloro-2-propenyl) ester</ENT> </ROW> <ROW> <ENT I="01">U389</ENT> <ENT>2303-17-5</ENT> <ENT>Triallate</ENT> </ROW> <ROW> <ENT I="01">U394</ENT> <ENT>30558-43-1</ENT> <ENT>A2213</ENT> </ROW> <ROW> <ENT I="01">U394</ENT> <ENT>30558-43-1</ENT> <ENT>Ethanimidothioic acid, 2-(dimethylamino)-N-hydroxy-2-oxo-, methyl ester</ENT> </ROW> <ROW> <ENT I="01">U395</ENT> <ENT>5952-26-1</ENT> <ENT>Diethylene glycol, dicarbamate</ENT> </ROW> <ROW> <ENT I="01">U395</ENT> <ENT>5952-26-1</ENT> <ENT>Ethanol, 2,2′-oxybis-, dicarbamate</ENT> </ROW> <ROW> <ENT I="01">U404</ENT> <ENT>121-44-8</ENT> <ENT>Ethanamine, N,N-diethyl-</ENT> </ROW> <ROW> <ENT I="01">U404</ENT> <ENT>121-44-8</ENT> <ENT>Triethylamine</ENT> </ROW> <ROW> <ENT I="01">U409</ENT> <ENT>23564-05-8</ENT> <ENT>Carbamic acid, [1,2-phenylenebis (iminocarbonothioyl)]bis-, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U409</ENT> <ENT>23564-05-8</ENT> <ENT>Thiophanate-methyl</ENT> </ROW> <ROW> <ENT I="01">U410</ENT> <ENT>59669-26-0</ENT> <ENT>Ethanimidothioic acid, N,N′-[thiobis[(methylimino)carbonyloxy]]bis-, dimethyl ester</ENT> </ROW> <ROW> <ENT I="01">U410</ENT> <ENT>59669-26-0</ENT> <ENT>Thiodicarb</ENT> </ROW> <ROW> <ENT I="01">U411</ENT> <ENT>114-26-1</ENT> <ENT>Phenol, 2-(1-methylethoxy)-, methylcarbamate</ENT> </ROW> <ROW> <ENT I="01">U411</ENT> <ENT>114-26-1</ENT> <ENT>Propoxur</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-76-5</ENT> <ENT>Acetic acid, (2,4,5-trichlorophenoxy)-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>87-86-5</ENT> <ENT>Pentachlorophenol</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>87-86-5</ENT> <ENT>Phenol, pentachloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>58-90-2</ENT> <ENT>Phenol, 2,3,4,6-tetrachloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>95-95-4</ENT> <ENT>Phenol, 2,4,5-trichloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>88-06-2</ENT> <ENT>Phenol, 2,4,6-trichloro-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-72-1</ENT> <ENT>Propanoic acid, 2-(2,4,5-trichlorophenoxy)-</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-72-1</ENT> <ENT>Silvex (2,4,5-TP)</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>93-76-5</ENT> <ENT>2,4,5-T</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>58-90-2</ENT> <ENT>2,3,4,6-Tetrachlorophenol</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>95-95-4</ENT> <ENT>2,4,5-Trichlorophenol</ENT> </ROW> <ROW> <ENT I="01">See F027</ENT> <ENT>88-06-2</ENT> <ENT>2,4,6-Trichlorophenol</ENT> </ROW> <TNOTE> <SU>1</SU> CAS Number given for parent compound only.</TNOTE> </GPOTABLE> <CITA>[45 FR 78529, 78541, Nov. 25, 1980]</CITA> <EDNOTE> <PRTPAGE P="97"/> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 261.33, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 261.35</SECTNO> <SUBJECT>Deletion of certain hazardous waste codes following equipment cleaning and replacement.</SUBJECT> <P>(a) Wastes from wood preserving processes at plants that do not resume or initiate use of chlorophenolic preservatives will not meet the listing definition of F032 once the generator has met all of the requirements of paragraphs (b) and (c) of this section. These wastes may, however, continue to meet another hazardous waste listing description or may exhibit one or more of the hazardous waste characteristics.</P> <P>(b) Generators must either clean or replace all process equipment that may have come into contact with chlorophenolic formulations or constituents thereof, including, but not limited to, treatment cylinders, sumps, tanks, piping systems, drip pads, fork lifts, and trams, in a manner that minimizes or eliminates the escape of hazardous waste or constituents, leachate, contaminated drippage, or hazardous waste decomposition products to the ground water, surface water, or atmosphere.</P> <P>(1) Generators shall do one of the following:</P> <P>(i) Prepare and follow an equipment cleaning plan and clean equipment in accordance with this section;</P> <P>(ii) Prepare and follow an equipment replacement plan and replace equipment in accordance with this section; or</P> <P>(iii) Document cleaning and replacement in accordance with this section, carried out after termination of use of chlorophenolic preservations.</P> <P>(2) Cleaning Requirements.</P> <P>(i) Prepare and sign a written equipment cleaning plan that describes:</P> <P>(A) The equipment to be cleaned;</P> <P>(B) How the equipment will be cleaned;</P> <P>(C) The solvent to be used in cleaning;</P> <P>(D) How solvent rinses will be tested; and</P> <P>(E) How cleaning residues will be disposed.</P> <P>(ii) Equipment must be cleaned as follows:</P> <P>(A) Remove all visible residues from process equipment;</P> <P>(B) Rinse process equipment with an appropriate solvent until dioxins and dibenzofurans are not detected in the final solvent rinse.</P> <P>(iii) Analytical requirements.</P> <P>(A) Rinses must be tested by using an appropriate method.</P> <P>(B) “Not detected” means at or below the following lower method calibration limits (MCLs): The 2,3,7,8-TCDD-based MCL—0.01 parts per trillion (ppt), sample weight of 1000 g, IS spiking level of 1 ppt, final extraction volume of 10-50 μL. For other congeners—multiply the values by 1 for TCDF/PeCDD/PeCDF, by 2.5 for HxCDD/HxCDF/HpCDD/HpCDF, and by 5 for OCDD/OCDF.</P> <P>(iv) The generator must manage all residues from the cleaning process as F032 waste.</P> <P>(3) Replacement requirements.</P> <P>(i) Prepare and sign a written equipment replacement plan that describes:</P> <P>(A) The equipment to be replaced;</P> <P>(B) How the equipment will be replaced; and</P> <P>(C) How the equipment will be disposed.</P> <P>(ii) The generator must manage the discarded equipment as F032 waste.</P> <P>(4) Documentation requirements.</P> <P>(i) Document that previous equipment cleaning and/or replacement was performed in accordance with this section and occurred after cessation of use of chlorophenolic preservatives.</P> <P>(c) The generator must maintain the following records documenting the cleaning and replacement as part of the facility's operating record:</P> <P>(1) The name and address of the facility;</P> <P>(2) Formulations previously used and the date on which their use ceased in each process at the plant;</P> <P>(3) Formulations currently used in each process at the plant;</P> <P>(4) The equipment cleaning or replacement plan;<PRTPAGE P="98"/> </P> <P>(5) The name and address of any persons who conducted the cleaning and replacement;</P> <P>(6) The dates on which cleaning and replacement were accomplished;</P> <P>(7) The dates of sampling and testing;</P> <P>(8) A description of the sample handling and preparation techniques, including techniques used for extraction, containerization, preservation, and chain-of-custody of the samples;</P> <P>(9) A description of the tests performed, the date the tests were performed, and the results of the tests;</P> <P>(10) The name and model numbers of the instrument(s) used in performing the tests;</P> <P>(11) QA/QC documentation; and</P> <P>(12) The following statement signed by the generator or his authorized representative:</P> <EXTRACT> <P>I certify under penalty of law that all process equipment required to be cleaned or replaced under 40 CFR 261.35 was cleaned or replaced as represented in the equipment cleaning and replacement plan and accompanying documentation. I am aware that there are significant penalties for providing false information, including the possibility of fine or imprisonment.</P> </EXTRACT> <CITA>[55 FR 50482, Dec. 6, 1990, as amended at 56 FR 30195, July 1, 1991; 70 FR 34561, June 14, 2005]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—Exclusions/Exemptions</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>71 FR 42948, July 28, 2006, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 261.38</SECTNO> <SUBJECT>Comparable/Syngas Fuel Exclusion.</SUBJECT> <P>Wastes that meet the following comparable/syngas fuel requirements are not solid wastes:</P> <P>(a) <E T="03">Comparable fuel specifications.</E>—(1) <E T="03">Physical specifications.</E>—(i) <E T="03">Heating value.</E> The heating value must exceed 5,000 BTU/lbs. (11,500 J/g).</P> <P>(ii) <E T="03">Viscosity.</E> The viscosity must not exceed: 50 cs, as-fired.</P> <P>(2) <E T="03">Constituent specifications.</E> For compounds listed in table 1 to this section the specification levels and, where non-detect is the specification, minimum required detection limits are: (see Table 1).</P> <P>(b) <E T="03">Synthesis gas fuel specification.</E>—Synthesis gas fuel (i.e., syngas fuel) that is generated from hazardous waste must:</P> <P>(1) Have a minimum Btu value of 100 Btu/Scf;</P> <P>(2) Contain less than 1 ppmv of total halogen;</P> <P>(3) Contain less than 300 ppmv of total nitrogen other than diatomic nitrogen (N<E T="52">2</E>);</P> <P>(4) Contain less than 200 ppmv of hydrogen sulfide; and</P> <P>(5) Contain less than 1 ppmv of each hazardous constituent in the target list of appendix VIII constituents of this part.</P> <GPOTABLE CDEF="s50,11,7,7,5.2,6.1" COLS="6" OPTS="L2"> <TTITLE>Table 1 to § 261.38—Detection and Detection Limit Values for Comparable Fuel Specification</TTITLE> <BOXHD> <CHED H="1">Chemical name</CHED> <CHED H="1">CAS No.</CHED> <CHED H="1">Composite value<LI>(mg/kg)</LI> </CHED> <CHED H="1">Heating value<LI>(BTU/lb)</LI> </CHED> <CHED H="1">Concentration limit<LI>(mg/kg at 10,000 BTU/lb)</LI> </CHED> <CHED H="1">Minimum required detection limit<LI>(mg/kg)</LI> </CHED> </BOXHD> <ROW> <ENT I="01">Total Nitrogen as N</ENT> <ENT>NA</ENT> <ENT>9000</ENT> <ENT>18400</ENT> <ENT>4900</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Total Halogens as Cl</ENT> <ENT>NA</ENT> <ENT>1000</ENT> <ENT>18400</ENT> <ENT>540</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Total Organic Halogens as Cl</ENT> <ENT>NA</ENT> <ENT/> <ENT/> <ENT>(<SU>1</SU>)</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Polychlorinated biphenyls, total [Arocolors, total]</ENT> <ENT>1336-36-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="01">Cyanide, total</ENT> <ENT>57-12-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.0</ENT> </ROW> <ROW> <ENT I="22">Metals:</ENT> </ROW> <ROW> <ENT I="03">Antimony, total</ENT> <ENT>7440-36-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>12</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Arsenic, total</ENT> <ENT>7440-38-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>0.23</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Barium, total</ENT> <ENT>7440-39-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>23</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Beryllium, total</ENT> <ENT>7440-41-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>1.2</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Cadmium, total</ENT> <ENT>7440-43-9</ENT> <ENT/> <ENT>ND</ENT> <ENT/> <ENT>1.2</ENT> </ROW> <ROW> <ENT I="03">Chromium, total</ENT> <ENT>7440-47-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>2.3</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Cobalt</ENT> <ENT>7440-48-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>4.6</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Lead, total</ENT> <ENT>7439-92-1</ENT> <ENT>57</ENT> <ENT>18100</ENT> <ENT>31</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Manganese</ENT> <ENT>7439-96-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>1.2</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Mercury, total</ENT> <ENT>7439-97-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>0.25</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Nickel, total</ENT> <ENT>7440-02-0</ENT> <ENT>106</ENT> <ENT>18400</ENT> <ENT>58</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Selenium, total</ENT> <ENT>7782-49-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>0.23</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="99"/> <ENT I="03">Silver, total</ENT> <ENT>7440-22-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>2.3</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Thallium, total</ENT> <ENT>7440-28-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>23</ENT> <ENT/> </ROW> <ROW> <ENT I="22">Hydrocarbons:</ENT> </ROW> <ROW> <ENT I="03">Benzo[a]anthracene</ENT> <ENT>56-55-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Benzene</ENT> <ENT>71-43-2</ENT> <ENT>8000</ENT> <ENT>19600</ENT> <ENT>4100</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Benzo[b]fluoranthene</ENT> <ENT>205-99-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Benzo[k]fluoranthene</ENT> <ENT>207-08-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Benzo[a]pyrene</ENT> <ENT>50-32-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Chrysene</ENT> <ENT>218-01-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Dibenzo[a,h]anthracene</ENT> <ENT>53-70-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">7,12-Dimethylbenz[a]anthracene</ENT> <ENT>57-97-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Fluoranthene</ENT> <ENT>206-44-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Indeno(1,2,3-cd)pyrene</ENT> <ENT>193-39-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">3-Methylcholanthrene</ENT> <ENT>56-49-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Naphthalene</ENT> <ENT>91-20-3</ENT> <ENT>6200</ENT> <ENT>19400</ENT> <ENT>3200</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Toluene</ENT> <ENT>108-88-3</ENT> <ENT>69000</ENT> <ENT>19400</ENT> <ENT>36000</ENT> <ENT/> </ROW> <ROW> <ENT I="22">Oxygenates:</ENT> </ROW> <ROW> <ENT I="03">Acetophenone</ENT> <ENT>98-86-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Acrolein</ENT> <ENT>107-02-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>39</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Allyl alcohol</ENT> <ENT>107-18-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>30</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Bis(2-ethylhexyl)phthalate [Di-2-ethylhexyl phthalate]</ENT> <ENT>117-81-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Butyl benzyl phthalate</ENT> <ENT>85-68-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">o-Cresol [2-Methyl phenol]</ENT> <ENT>95-48-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">m-Cresol [3-Methyl phenol]</ENT> <ENT>108-39-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">p-Cresol [4-Methyl phenol]</ENT> <ENT>106-44-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Di-n-butyl phthalate</ENT> <ENT>84-74-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Diethyl phthalate</ENT> <ENT>84-66-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">2,4-Dimethylphenol</ENT> <ENT>105-67-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Dimethyl phthalate</ENT> <ENT>131-11-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Di-n-octyl phthalate</ENT> <ENT>117-84-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Endothall</ENT> <ENT>145-73-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>100</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Ethyl methacrylate</ENT> <ENT>97-63-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>39</ENT> <ENT/> </ROW> <ROW> <ENT I="03">2-Ethoxyethanol [Ethylene glycol monoethyl ether]</ENT> <ENT>110-80-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>100</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Isobutyl alcohol</ENT> <ENT>78-83-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>39</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Isosafrole</ENT> <ENT>120-58-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Methyl ethyl ketone [2-Butanone]</ENT> <ENT>78-93-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>39</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Methyl methacrylate</ENT> <ENT>80-62-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>39</ENT> <ENT/> </ROW> <ROW> <ENT I="03">1,4-Naphthoquinone</ENT> <ENT>130-15-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Phenol</ENT> <ENT>108-95-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Propargyl alcohol [2-Propyn-1-ol]</ENT> <ENT>107-19-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>30</ENT> <ENT/> </ROW> <ROW> <ENT I="03">Safrole</ENT> <ENT>94-59-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>2400</ENT> <ENT/> </ROW> <ROW> <ENT I="22">Sulfonated Organics:</ENT> </ROW> <ROW> <ENT I="03">Carbon disulfide</ENT> <ENT>75-15-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Disulfoton</ENT> <ENT>298-04-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Ethyl methanesulfonate</ENT> <ENT>62-50-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Methyl methanesulfonate</ENT> <ENT>66-27-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Phorate</ENT> <ENT>298-02-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,3-Propane sultone</ENT> <ENT>1120-71-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Tetraethyldithiopyrophosphate [Sulfotepp]</ENT> <ENT>3689-24-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Thiophenol [Benzenethiol]</ENT> <ENT>108-98-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>30</ENT> </ROW> <ROW> <ENT I="03">O,O,O-Triethyl phosphorothioate</ENT> <ENT>126-68-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="22">Nitrogenated Organics:</ENT> </ROW> <ROW> <ENT I="03">Acetonitrile [Methyl cyanide]</ENT> <ENT>75-05-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">2-Acetylaminofluorene [2-AAF]</ENT> <ENT>53-96-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Acrylonitrile</ENT> <ENT>107-13-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">4-Aminobiphenyl</ENT> <ENT>92-67-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">4-Aminopyridine</ENT> <ENT>504-24-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Aniline</ENT> <ENT>62-53-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Benzidine</ENT> <ENT>92-87-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Dibenz[a,j]acridine</ENT> <ENT>224-42-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">O,O-Diethyl O-pyrazinyl phosphorothioate [Thionazin]</ENT> <ENT>297-97-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Dimethoate</ENT> <ENT>60-51-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">p-(Dimethylamino) azobenzene [4-Dime thylaminoazobenzene]</ENT> <ENT>60-11-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">3,3′-Dimethylbenzidine</ENT> <ENT>119-93-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">α,α-Dimethylphenethylamine</ENT> <ENT>122-09-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">3,3′-Dimethoxybenzidine</ENT> <ENT>119-90-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <PRTPAGE P="100"/> <ENT I="03">1,3-Dinitrobenzene [m-Dinitrobenzene]</ENT> <ENT>99-65-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">4,6-Dinitro-o-cresol</ENT> <ENT>534-52-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2,4-Dinitrophenol</ENT> <ENT>51-28-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2,4-Dinitrotoluene</ENT> <ENT>121-14-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2,6-Dinitrotoluene</ENT> <ENT>606-20-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Dinoseb [2-sec-Butyl-4,6-dinitrophenol]</ENT> <ENT>88-85-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Diphenylamine</ENT> <ENT>122-39-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Ethyl carbamate [Urethane]</ENT> <ENT>51-79-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Ethylenethiourea (2-Imidazolidinethione)</ENT> <ENT>96-45-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>110</ENT> </ROW> <ROW> <ENT I="03">Famphur</ENT> <ENT>52-85-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Methacrylonitrile</ENT> <ENT>126-98-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Methapyrilene</ENT> <ENT>91-80-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Methomyl</ENT> <ENT>16752-77-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>57</ENT> </ROW> <ROW> <ENT I="03">2-Methyllactonitrile, [Acetone cyanohydrin]</ENT> <ENT>75-86-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Methyl parathion</ENT> <ENT>298-00-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">MNNG (N-Metyl-N-nitroso-N′-nitroguanidine)</ENT> <ENT>70-25-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>110</ENT> </ROW> <ROW> <ENT I="03">1-Naphthylamine, [α-Naphthylamine]</ENT> <ENT>134-32-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2-Naphthylamine, [β-Naphthylamine]</ENT> <ENT>91-59-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Nicotine</ENT> <ENT>54-11-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">4-Nitroaniline, [p-Nitroaniline]</ENT> <ENT>100-01-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Nitrobenzene</ENT> <ENT>98-95-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">p-Nitrophenol, [p-Nitrophenol]</ENT> <ENT>100-02-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">5-Nitro-o-toluidine</ENT> <ENT>99-55-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitrosodi-n-butylamine</ENT> <ENT>924-16-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitrosodiethylamine</ENT> <ENT>55-18-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitrosodiphenylamine, [Diphenylnitrosamine]</ENT> <ENT>86-30-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitroso-N-methylethylamine</ENT> <ENT>10595-95-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitrosomorpholine</ENT> <ENT>59-89-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitrosopiperidine</ENT> <ENT>100-75-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Nitrosopyrrolidine</ENT> <ENT>930-55-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2-Nitropropane</ENT> <ENT>79-46-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>30</ENT> </ROW> <ROW> <ENT I="03">Parathion</ENT> <ENT>56-38-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Phenacetin</ENT> <ENT>62-44-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,4-Phenylene diamine, [p-Phenylenediamine]</ENT> <ENT>106-50-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">N-Phenylthiourea</ENT> <ENT>103-85-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>57</ENT> </ROW> <ROW> <ENT I="03">2-Picoline [alpha-Picoline]</ENT> <ENT>109-06-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Propylthioracil, [6-Propyl-2-thiouracil]</ENT> <ENT>51-52-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Pyridine</ENT> <ENT>110-86-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Strychnine</ENT> <ENT>57-24-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Thioacetamide</ENT> <ENT>62-55-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>57</ENT> </ROW> <ROW> <ENT I="03">Thiofanox</ENT> <ENT>39196-18-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Thiourea</ENT> <ENT>62-56-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>57</ENT> </ROW> <ROW> <ENT I="03">Toluene-2,4-diamine [2,4-Diaminotoluene]</ENT> <ENT>95-80-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>57</ENT> </ROW> <ROW> <ENT I="03">Toluene-2,6-diamine [2,6-Diaminotoluene]</ENT> <ENT>823-40-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>57</ENT> </ROW> <ROW> <ENT I="03">o-Toluidine</ENT> <ENT>95-53-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">p-Toluidine</ENT> <ENT>106-49-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">1,3,5-Trinitrobenzene, [sym-Trinitobenzene]</ENT> <ENT>99-35-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="22">Halogenated Organics:</ENT> </ROW> <ROW> <ENT I="03">Allyl chloride</ENT> <ENT>107-05-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Aramite</ENT> <ENT>140-57-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Benzal chloride [Dichloromethyl benzene]</ENT> <ENT>98-87-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Benzyl chloride</ENT> <ENT>100-44-77</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">bis(2-Chloroethyl)ether [Dichoroethyl ether]</ENT> <ENT>111-44-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Bromoform [Tribromomethane]</ENT> <ENT>75-25-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Bromomethane [Methyl bromide]</ENT> <ENT>74-83-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">4-Bromophenyl phenyl ether [p-Bromo diphenyl ether]</ENT> <ENT>101-55-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Carbon tetrachloride</ENT> <ENT>56-23-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Chlordane</ENT> <ENT>57-74-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>14</ENT> </ROW> <ROW> <ENT I="03">p-Chloroaniline</ENT> <ENT>106-47-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Chlorobenzene</ENT> <ENT>108-90-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Chlorobenzilate</ENT> <ENT>510-15-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">p-Chloro-m-cresol</ENT> <ENT>59-50-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2-Chloroethyl vinyl ether</ENT> <ENT>110-75-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Chloroform</ENT> <ENT>67-66-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Chloromethane [Methyl chloride]</ENT> <ENT>74-87-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">2-Chloronaphthalene [beta-Chloronaphthalene]</ENT> <ENT>91-58-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2-Chlorophenol [o-Chlorophenol]</ENT> <ENT>95-57-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <PRTPAGE P="101"/> <ENT I="03">Chloroprene [2-Chloro-1,3-butadiene]</ENT> <ENT>1126-99-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">2,4-D [2,4-Dichlorophenoxyacetic acid]</ENT> <ENT>94-75-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>7.0</ENT> </ROW> <ROW> <ENT I="03">Diallate</ENT> <ENT>2303-16-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,2-Dibromo-3-chloropropane</ENT> <ENT>96-12-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">1,2-Dichlorobenzene [o-Dichlorobenzene]</ENT> <ENT>95-50-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,3-Dichlorobenzene [m-Dichlorobenzene]</ENT> <ENT>541-73-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,4-Dichlorobenzene [p-Dichlorobenzene]</ENT> <ENT>106-46-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">3,3′-Dichlorobenzidine</ENT> <ENT>91-94-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Dichlorodifluoromethane [CFC-12]</ENT> <ENT>75-71-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">1,2-Dichloroethane [Ethylene dichloride]</ENT> <ENT>107-06-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">1,1-Dichloroethylene [Vinylidene chloride]</ENT> <ENT>75-35-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Dichloromethoxy ethane [Bis(2-chloroethoxy)methane]</ENT> <ENT>111-91-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2,4-Dichlorophenol</ENT> <ENT>120-83-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2,6-Dichlorophenol</ENT> <ENT>87-65-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,2-Dichloropropane [Propylene dichloride]</ENT> <ENT>78-87-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">cis-1,3-Dichloropropylene</ENT> <ENT>10061-01-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">trans-1,3-Dichloropropylene</ENT> <ENT>10061-02-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">1,3-Dichloro-2-propanol</ENT> <ENT>96-23-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>30</ENT> </ROW> <ROW> <ENT I="03">Endosulfan I</ENT> <ENT>959-98-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Endosulfan II</ENT> <ENT>33213-65-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Endrin</ENT> <ENT>72-20-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Endrin aldehyde</ENT> <ENT>7421-93-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Endrin Ketone</ENT> <ENT>53494-70-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Epichlorohydrin [1-Chloro-2,3-epoxy propane]</ENT> <ENT>106-89-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>30</ENT> </ROW> <ROW> <ENT I="03">Ethylidene dichloride [1,1-Dichloroethane]</ENT> <ENT>75-34-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">2-Fluoroacetamide</ENT> <ENT>640-19-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Heptachlor</ENT> <ENT>76-44-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Heptachlor epoxide</ENT> <ENT>1024-57-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2.8</ENT> </ROW> <ROW> <ENT I="03">Hexachlorobenzene</ENT> <ENT>118-74-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Hexachloro-1,3-butadiene [Hexachlorobutadiene]</ENT> <ENT>87-68-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Hexachlorocyclopentadiene</ENT> <ENT>77-47-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Hexachloroethane</ENT> <ENT>67-72-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Hexachlorophene</ENT> <ENT>70-30-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>59000</ENT> </ROW> <ROW> <ENT I="03">Hexachloropropene [Hexachloropropylene]</ENT> <ENT>1888-71-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Isodrin</ENT> <ENT>465-73-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Kepone [Chlordecone]</ENT> <ENT>143-50-0</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>4700</ENT> </ROW> <ROW> <ENT I="03">Lindane [gamma-BHC] [gamma-Hexachlorocyclohexane]</ENT> <ENT>58-89-9</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>1.4</ENT> </ROW> <ROW> <ENT I="03">Methylene chloride [Dichloromethane]</ENT> <ENT>75-09-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">4,4′-Methylene-bis(2-chloroaniline)</ENT> <ENT>101-14-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>100</ENT> </ROW> <ROW> <ENT I="03">Methyl iodide [Iodomethane]</ENT> <ENT>74-88-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Pentachlorobenzene</ENT> <ENT>608-93-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Pentachloroethane</ENT> <ENT>76-01-7</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Pentachloronitrobenzene [PCNB] [Quintobenzene] [Quintozene]</ENT> <ENT>82-68-8</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Pentachlorophenol</ENT> <ENT>87-86-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Pronamide</ENT> <ENT>23950-58-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">Silvex [2,4,5-Trichlorophenoxypropionic acid]</ENT> <ENT>93-72-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>7.0</ENT> </ROW> <ROW> <ENT I="03">2,3,7,8-Tetrachlorodibenzo-p-dioxin [2,3,7,8-TCDD]</ENT> <ENT>1746-01-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>30</ENT> </ROW> <ROW> <ENT I="03">1,2,4,5-Tetrachlorobenzene</ENT> <ENT>95-94-3</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,1,2,2-Tetrachloroethane</ENT> <ENT>79-34-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Tetrachloroethylene [Perchloroethylene]</ENT> <ENT>127-18-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">2,3,4,6-Tetrachlorophenol</ENT> <ENT>58-90-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,2,4-Trichlorobenzene</ENT> <ENT>120-82-1</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,1,1-Trichloroethane [Methyl chloroform]</ENT> <ENT>71-55-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">1,1,2-Trichloroethane [Vinyl trichloride]</ENT> <ENT>79-00-5</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Trichloroethylene</ENT> <ENT>79-01-6</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Trichlorofluoromethane [Trichlormonofluoromethane]</ENT> <ENT>75-69-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">2,4,5-Trichlorophenol</ENT> <ENT>95-95-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">2,4,6-Trichlorophenol</ENT> <ENT>88-06-2</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>2400</ENT> </ROW> <ROW> <ENT I="03">1,2,3-Trichloropropane</ENT> <ENT>96-18-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <ROW> <ENT I="03">Vinyl Chloride</ENT> <ENT>75-01-4</ENT> <ENT>ND</ENT> <ENT/> <ENT>ND</ENT> <ENT>39</ENT> </ROW> <TNOTE> <E T="04">Notes:</E> </TNOTE> <TNOTE>NA—Not Applicable.</TNOTE> <TNOTE>ND—Nondetect.</TNOTE> <TNOTE> <SU>1</SU> 25 or individual halogenated organics listed below.</TNOTE> </GPOTABLE> <PRTPAGE P="102"/> <P>(c) <E T="03">Implementation.</E> Waste that meets the comparable or syngas fuel specifications provided by paragraphs (a) or (b) of this section (these constituent levels must be achieved by the comparable fuel when generated, or as a result of treatment or blending, as provided in paragraphs (c)(3) or (4) of this section) is excluded from the definition of solid waste provided that the following requirements are met:</P> <P>(1) <E T="03">Notices.</E> For purposes of this section, the person claiming and qualifying for the exclusion is called the comparable/syngas fuel generator and the person burning the comparable/syngas fuel is called the comparable/syngas burner. The person who generates the comparable fuel or syngas fuel must claim and certify to the exclusion.</P> <P>(i) State RCRA and CAA Directors in Authorized States or Regional RCRA and CAA Directors in Unauthorized States.—</P> <P>(A) The generator must submit a one-time notice to the Regional or State RCRA and CAA Directors, in whose jurisdiction the exclusion is being claimed and where the comparable/syngas fuel will be burned, certifying compliance with the conditions of the exclusion and providing documentation as required by paragraph (c)(1)(i)(C) of this section;</P> <P>(B) If the generator is a company that generates comparable/syngas fuel at more than one facility, the generator shall specify at which sites the comparable/syngas fuel will be generated;</P> <P>(C) A comparable/syngas fuel generator's notification to the Directors must contain the following items:</P> <P>(<E T="03">1</E>) The name, address, and RCRA ID number of the person/facility claiming the exclusion;</P> <P>(<E T="03">2</E>) The applicable EPA Hazardous Waste Codes for the hazardous waste;</P> <P>(<E T="03">3</E>) Name and address of the units, meeting the requirements of paragraph (c)(2) of this section, that will burn the comparable/syngas fuel; and</P> <P>(<E T="03">4</E>) The following statement is signed and submitted by the person claiming the exclusion or his authorized representative: </P> <EXTRACT> <P>Under penalty of criminal and civil prosecution for making or submitting false statements, representations, or omissions, I certify that the requirements of 40 CFR 261.38 have been met for all waste identified in this notification. Copies of the records and information required at 40 CFR 261.38(c)(10) are available at the comparable/syngas fuel generator's facility. Based on my inquiry of the individuals immediately responsible for obtaining the information, the information is, to the best of my knowledge and belief, true, accurate, and complete. I am aware that there are significant penalties for submitting false information, including the possibility of fine and imprisonment for knowing violations.</P> </EXTRACT> <P>(ii) <E T="03">Public notice.</E> Prior to burning an excluded comparable/syngas fuel, the burner must publish in a major newspaper of general circulation local to the site where the fuel will be burned, a notice entitled “Notification of Burning a Comparable/Syngas Fuel Excluded Under the Resource Conservation and Recovery Act” containing the following information:</P> <P>(A) Name, address, and RCRA ID number of the generating facility;</P> <P>(B) Name and address of the unit(s) that will burn the comparable/syngas fuel;</P> <P>(C) A brief, general description of the manufacturing, treatment, or other process generating the comparable/syngas fuel;</P> <P>(D) An estimate of the average and maximum monthly and annual quantity of the waste claimed to be excluded; and</P> <P>(E) Name and mailing address of the Regional or State Directors to whom the claim was submitted.</P> <P>(2) <E T="03">Burning.</E> The comparable/syngas fuel exclusion for fuels meeting the requirements of paragraphs (a) or (b) and (c)(1) of this section applies only if the fuel is burned in the following units that also shall be subject to Federal/State/local air emission requirements, including all applicable CAA MACT requirements:</P> <P>(i) Industrial furnaces as defined in § 260.10 of this chapter;</P> <P>(ii) Boilers, as defined in § 260.10 of this chapter, that are further defined as follows:</P> <P>(A) Industrial boilers located on the site of a facility engaged in a manufacturing process where substances are transformed into new products, including the component parts of products, <PRTPAGE P="103"/>by mechanical or chemical processes; or</P> <P>(B) Utility boilers used to produce electric power, steam, heated or cooled air, or other gases or fluids for sale;</P> <P>(iii) Hazardous waste incinerators subject to regulation under subpart O of parts 264 or 265 of this chapter or applicable CAA MACT standards.</P> <P>(iv) Gas turbines used to produce electric power, steam, heated or cooled air, or other gases or fluids for sale.</P> <P>(3) <E T="03">Blending to meet the viscosity specification.</E> A hazardous waste blended to meet the viscosity specification shall:</P> <P>(i) As generated and prior to any blending, manipulation, or processing meet the constituent and heating value specifications of paragraphs (a)(1)(i) and (a)(2) of this section;</P> <P>(ii) Be blended at a facility that is subject to the applicable requirements of parts 264 and 265, or § 262.34 of this chapter; and</P> <P>(iii) Not violate the dilution prohibition of paragraph (c)(6) of this chapter.</P> <P>(4) <E T="03">Treatment to meet the comparable fuel exclusion specifications.</E> (i) A hazardous waste may be treated to meet the exclusion specifications of paragraphs (a)(1) and (2) of this section provided the treatment:</P> <P>(A) Destroys or removes the constituent listed in the specification or raises the heating value by removing or destroying hazardous constituents or materials;</P> <P>(B) Is performed at a facility that is subject to the applicable requirements of parts 264 and 265, or § 262.34 of this Chapter; and</P> <P>(C) Does not violate the dilution prohibition of paragraph (c)(6) of this seciton.</P> <P>(ii) Residuals resulting from the treatment of a hazardous waste listed in subpart D of this part to generate a comparable fuel remain a hazardous waste.</P> <P>(5) <E T="03">Generation of a syngas fuel.</E> (i) A syngas fuel can be generated from the processing of hazardous wastes to meet the exclusion specifications of paragraph (b) of this section provided the processing:</P> <P>(A) Destroys or removes the constituent listed in the specification or raises the heating value by removing or destroying constituents or materials;</P> <P>(B) Is performed at a facility that is subject to the applicable requirements of parts 264 and 265, or § 262.34 of this chapter or is an exempt recycling unit pursuant to § 261.6(c) of this chapter; and</P> <P>(C) Does not violate the dilution prohibition of paragraph (c)(6) of this chapter.</P> <P>(ii) Residuals resulting from the treatment of a hazardous waste listed in subpart D of this part to generate a syngas fuel remain a hazardous waste.</P> <P>(6) <E T="03">Dilution prohibition for comparable and syngas fuels.</E> No generator, transporter, handler, or owner or operator of a treatment, storage, or disposal facility shall in any way dilute a hazardous waste to meet the exclusion specifications of paragraph (a)(1)(i), (a)(2) or (b) of this section.</P> <P>(7) <E T="03">Waste analysis plans.</E> The generator of a comparable/syngas fuel shall develop and follow a written waste analysis plan which describes the procedures for sampling and analysis of the hazardous waste to be excluded. The plan shall be followed and retained at the facility excluding the waste.</P> <P>(i) At a minimum, the plan must specify:</P> <P>(A) The parameters for which each hazardous waste will be analyzed and the rationale for the selection of those parameters;</P> <P>(B) The test methods which will be used to test for these parameters;</P> <P>(C) The sampling method which will be used to obtain a representative sample of the waste to be analyzed;</P> <P>(D) The frequency with which the initial analysis of the waste will be reviewed or repeated to ensure that the analysis is accurate and up to date; and</P> <P>(E) If process knowledge is used in the waste determination, any information prepared by the generator in making such determination.</P> <P>(ii) The waste analysis plan shall also contain records of the following:</P> <P>(A) The dates and times waste samples were obtained, and the dates the samples were analyzed;</P> <P>(B) The names and qualifications of the person(s) who obtained the samples;<PRTPAGE P="104"/> </P> <P>(C) A description of the temporal and spatial locations of the samples;</P> <P>(D) The name and address of the laboratory facility at which analyses of the samples were performed;</P> <P>(E) A description of the analytical methods used, including any clean-up and sample preparation methods;</P> <P>(F) All quantitation limits achieved and all other quality control results for the analysis (including method blanks, duplicate analyses, matrix spikes, etc.), laboratory quality assurance data, and description of any deviations from analytical methods written in the plan or from any other activity written in the plan which occurred;</P> <P>(G) All laboratory results demonstrating that the exclusion specifications have been met for the waste; and</P> <P>(H) All laboratory documentation that support the analytical results, unless a contract between the claimant and the laboratory provides for the documentation to be maintained by the laboratory for the period specified in paragraph (c)(11) of this section and also provides for the availability of the documentation to the claimant upon request.</P> <P>(iii) Syngas fuel generators shall submit for approval, prior to performing sampling, analysis, or any management of a syngas fuel as an excluded waste, a waste analysis plan containing the elements of paragraph (c)(7)(i) of this section to the appropriate regulatory authority. The approval of waste analysis plans must be stated in writing and received by the facility prior to sampling and analysis to demonstrate the exclusion of a syngas. The approval of the waste analysis plan may contain such provisions and conditions as the regulatory authority deems appropriate.</P> <P>(8) <E T="03">Comparable fuel sampling and analysis.</E> (i) General. For each waste for which an exclusion is claimed, the generator of the hazardous waste must test for all the constituents on appendix VIII to this part, except those that the generator determines, based on testing or knowledge, should not be present in the waste. The generator is required to document the basis of each determination that a constituent should not be present. The generator may not determine that any of the following categories of constituents should not be present:</P> <P>(A) A constituent that triggered the toxicity characteristic for the waste constituents that were the basis of the listing of the waste stream, or constituents for which there is a treatment standard for the waste code in 40 CFR 268.40;</P> <P>(B) A constituent detected in previous analysis of the waste;</P> <P>(C) Constituents introduced into the process that generates the waste; or</P> <P>(D) Constituents that are byproducts or side reactions to the process that generates the waste. </P> <NOTE> <HD SOURCE="HED">Note to paragraph <E T="01">(c)(8):</E> </HD> <P>Any claim under this section must be valid and accurate for all hazardous constituents; a determination not to test for a hazardous constituent will not shield a generator from liability should that constituent later be found in the waste above the exclusion specifications.</P> </NOTE> <P>(ii) For each waste for which the exclusion is claimed where the generator of the comparable/syngas fuel is not the original generator of the hazardous waste, the generator of the comparable/syngas fuel may not use process knowledge pursuant to paragraph (c)(8)(i) of this section and must test to determine that all of the constituent specifications of paragraphs (a)(2) and (b) of this section have been met.</P> <P>(iii) The comparable/syngas fuel generator may use any reliable analytical method to demonstrate that no constituent of concern is present at concentrations above the specification levels. It is the responsibility of the generator to ensure that the sampling and analysis are unbiased, precise, and representative of the waste. For the waste to be eligible for exclusion, a generator must demonstrate that:</P> <P>(A) Each constituent of concern is not present in the waste above the specification level at the 95% upper confidence limit around the mean; and</P> <P>(B) The analysis could have detected the presence of the constituent at or below the specification level at the 95% upper confidence limit around the mean.</P> <P>(iv) Nothing in this paragraph preempts, overrides or otherwise negates the provision in § 262.11 of this chapter, <PRTPAGE P="105"/>which requires any person who generates a solid waste to determine if that waste is a hazardous waste.</P> <P>(v) In an enforcement action, the burden of proof to establish conformance with the exclusion specification shall be on the generator claiming the exclusion.</P> <P>(vi) The generator must conduct sampling and analysis in accordance with their waste analysis plan developed under paragraph (c)(7) of this section.</P> <P>(vii) Syngas fuel and comparable fuel that has not been blended in order to meet the kinematic viscosity specifications shall be analyzed as generated.</P> <P>(viii) If a comparable fuel is blended in order to meet the kinematic viscosity specifications, the generator shall:</P> <P>(A) Analyze the fuel as generated to ensure that it meets the constituent and heating value specifications; and</P> <P>(B) After blending, analyze the fuel again to ensure that the blended fuel continues to meet all comparable/syngas fuel specifications.</P> <P>(ix) Excluded comparable/syngas fuel must be re-tested, at a minimum, annually and must be retested after a process change that could change the chemical or physical properties of the waste.</P> <P>(9) <E T="03">Speculative accumulation.</E> Any persons handling a comparable/syngas fuel are subject to the speculative accumulation test under § 261.2(c)(4) of this chapter.</P> <P>(10) <E T="03">Records.</E> The generator must maintain records of the following information on-site:</P> <P>(i) All information required to be submitted to the implementing authority as part of the notification of the claim:</P> <P>(A) The owner/operator name, address, and RCRA facility ID number of the person claiming the exclusion;</P> <P>(B) The applicable EPA Hazardous Waste Codes for each hazardous waste excluded as a fuel; and</P> <P>(C) The certification signed by the person claiming the exclusion or his authorized representative.</P> <P>(ii) A brief description of the process that generated the hazardous waste and process that generated the excluded fuel, if not the same;</P> <P>(iii) An estimate of the average and maximum monthly and annual quantities of each waste claimed to be excluded;</P> <P>(iv) Documentation for any claim that a constituent is not present in the hazardous waste as required under paragraph (c)(8)(i) of this section;</P> <P>(v) The results of all analyses and all detection limits achieved as required under paragraph (c)(8) of this section;</P> <P>(vi) If the excluded waste was generated through treatment or blending, documentation as required under paragraph (c)(3) or (4) of this section;</P> <P>(vii) If the waste is to be shipped off-site, a certification from the burner as required under paragraph (c)(12) of this section;</P> <P>(viii) A waste analysis plan and the results of the sampling and analysis that includes the following:</P> <P>(A) The dates and times waste samples were obtained, and the dates the samples were analyzed;</P> <P>(B) The names and qualifications of the person(s) who obtained the samples;</P> <P>(C) A description of the temporal and spatial locations of the samples;</P> <P>(D) The name and address of the laboratory facility at which analyses of the samples were performed;</P> <P>(E) A description of the analytical methods used, including any clean-up and sample preparation methods;</P> <P>(F) All quantitation limits achieved and all other quality control results for the analysis (including method blanks, duplicate analyses, matrix spikes, etc.), laboratory quality assurance data, and description of any deviations from analytical methods written in the plan or from any other activity written in the plan which occurred;</P> <P>(G) All laboratory analytical results demonstrating that the exclusion specifications have been met for the waste; and</P> <P>(H) All laboratory documentation that support the analytical results, unless a contract between the claimant and the laboratory provides for the documentation to be maintained by the laboratory for the period specified in paragraph (c)(11) of this section and also provides for the availability of the documentation to the claimant upon request; and<PRTPAGE P="106"/> </P> <P>(ix) If the generator ships comparable/syngas fuel off-site for burning, the generator must retain for each shipment the following information on-site:</P> <P>(A) The name and address of the facility receiving the comparable/syngas fuel for burning;</P> <P>(B) The quantity of comparable/syngas fuel shipped and delivered;</P> <P>(C) The date of shipment or delivery;</P> <P>(D) A cross-reference to the record of comparable/syngas fuel analysis or other information used to make the determination that the comparable/syngas fuel meets the specifications as required under paragraph (c)(8) of this section; and</P> <P>(E) A one-time certification by the burner as required under paragraph (c)(12) of this section.</P> <P>(11) <E T="03">Records retention.</E> Records must be maintained for the period of three years. A generator must maintain a current waste analysis plan during that three year period.</P> <P>(12) <E T="03">Burner certification.</E> Prior to submitting a notification to the State and Regional Directors, a comparable/syngas fuel generator who intends to ship their fuel off-site for burning must obtain a one-time written, signed statement from the burner:</P> <P>(i) Certifying that the comparable/syngas fuel will only be burned in an industrial furnace or boiler, utility boiler, or hazardous waste incinerator, as required under paragraph (c)(2) of this section;</P> <P>(ii) Identifying the name and address of the units that will burn the comparable/syngas fuel; and</P> <P>(iii) Certifying that the state in which the burner is located is authorized to exclude wastes as comparable/syngas fuel under the provisions of this section.</P> <P>(13) <E T="03">Ineligible waste codes.</E> Wastes that are listed because of presence of dioxins or furans, as set out in Appendix VII of this part, are not eligible for this exclusion, and any fuel produced from or otherwise containing these wastes remains a hazardous waste subject to full RCRA hazardous waste management requirements.</P> <CITA>[63 FR 33823, June 19, 1998, as amended at 64 FR 53070, Sept. 30, 1999; 64 FR 63213, Nov. 19, 1999; 65 FR 42302, July 10, 2000; 70 FR 34562, June 14, 2005; 71 FR 40270, July 14, 2006; Redesignated at 71 FR 42949, July 28, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 261.39</SECTNO> <SUBJECT>Conditional Exclusion for Used, Broken Cathode Ray Tubes (CRTs) and Processed CRT Glass Undergoing Recycling.</SUBJECT> <P>Used, broken CRTs are not solid wastes if they meet the following conditions:</P> <P>(a) <E T="03">Prior to processing:</E> These materials are not solid wastes if they are destined for recycling and if they meet the following requirements:</P> <P>(1) <E T="03">Storage.</E> The broken CRTs must be either:</P> <P>(i) Stored in a building with a roof, floor, and walls, or</P> <P>(ii) Placed in a container (<E T="03">i.e.</E>, a package or a vehicle) that is constructed, filled, and closed to minimize releases to the environment of CRT glass (including fine solid materials).</P> <P>(2) <E T="03">Labeling.</E> Each container in which the used, broken CRT is contained must be labeled or marked clearly with one of the following phrases: “Used cathode ray tube(s)-contains leaded glass ” or “Leaded glass from televisions or computers.” It must also be labeled: “Do not mix with other glass materials.”</P> <P>(3) <E T="03">Transportation.</E> The used, broken CRTs must be transported in a container meeting the requirements of paragraphs (a)(1)(ii) and (2) of this section.</P> <P>(4) <E T="03">Speculative accumulation and use constituting disposal.</E> The used, broken CRTs are subject to the limitations on speculative accumulation as defined in paragraph (c)(8) of this section. If they are used in a manner constituting disposal, they must comply with the applicable requirements of part 266, subpart C instead of the requirements of this section.</P> <P>(5) <E T="03">Exports.</E> In addition to the applicable conditions specified in paragraphs (a)(1)-(4) of this section, exporters of used, broken CRTs must comply with the following requirements:</P> <P>(i) Notify EPA of an intended export before the CRTs are scheduled to leave <PRTPAGE P="107"/>the United States. A complete notification should be submitted sixty (60) days before the initial shipment is intended to be shipped off-site. This notification may cover export activities extending over a twelve (12) month or lesser period. The notification must be in writing, signed by the exporter, and include the following information:</P> <P>(A) Name, mailing address, telephone number and EPA ID number (if applicable) of the exporter of the CRTs.</P> <P>(B) The estimated frequency or rate at which the CRTs are to be exported and the period of time over which they are to be exported.</P> <P>(C) The estimated total quantity of CRTs specified in kilograms.</P> <P>(D) All points of entry to and departure from each foreign country through which the CRTs will pass.</P> <P>(E) A description of the means by which each shipment of the CRTs will be transported (<E T="03">e.g.</E>, mode of transportation vehicle (air, highway, rail, water, etc.), type(s) of container (drums, boxes, tanks, etc.)).</P> <P>(F) The name and address of the recycler and any alternate recycler.</P> <P>(G) A description of the manner in which the CRTs will be recycled in the foreign country that will be receiving the CRTs.</P> <P>(H) The name of any transit country through which the CRTs will be sent and a description of the approximate length of time the CRTs will remain in such country and the nature of their handling while there.</P> <P>(ii) Notifications submitted by mail should be sent to the following mailing address: Office of Enforcement and Compliance Assurance, Office of Federal Activities, International Compliance Assurance Division, (Mail Code 2254A), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460. Hand-delivered notifications should be sent to: Office of Enforcement and Compliance Assurance, Office of Federal Activities, International Compliance Assurance Division, (Mail Code 2254A), Environmental Protection Agency, Ariel Rios Bldg., Room 6144, 1200 Pennsylvania Ave., NW., Washington, DC. In both cases, the following shall be prominently displayed on the front of the envelope: “Attention: Notification of Intent to Export CRTs.”</P> <P>(iii) Upon request by EPA, the exporter shall furnish to EPA any additional information which a receiving country requests in order to respond to a notification.</P> <P>(iv) EPA will provide a complete notification to the receiving country and any transit countries. A notification is complete when EPA receives a notification which EPA determines satisfies the requirements of paragraph (a)(5)(i) of this section. Where a claim of confidentiality is asserted with respect to any notification information required by paragraph (a)(5)(i) of this section, EPA may find the notification not complete until any such claim is resolved in accordance with 40 CFR 260.2.</P> <P>(v) The export of CRTs is prohibited unless the receiving country consents to the intended export. When the receiving country consents in writing to the receipt of the CRTs, EPA will forward an Acknowledgment of Consent to Export CRTs to the exporter. Where the receiving country objects to receipt of the CRTs or withdraws a prior consent, EPA will notify the exporter in writing. EPA will also notify the exporter of any responses from transit countries.</P> <P>(vi) When the conditions specified on the original notification change, the exporter must provide EPA with a written renotification of the change, except for changes to the telephone number in paragraph (a)(5)(i)(A) of this section and decreases in the quantity indicated pursuant to paragraph (a)(5)(i)(C) of this section. The shipment cannot take place until consent of the receiving country to the changes has been obtained (except for changes to information about points of entry and departure and transit countries pursuant to paragraphs (a)(5)(i)(D) and (a)(5)(i)(H) of this section) and the exporter of CRTs receives from EPA a copy of the Acknowledgment of Consent to Export CRTs reflecting the receiving country's consent to the changes.</P> <P>(vii) A copy of the Acknowledgment of Consent to Export CRTs must accompany the shipment of CRTs. The shipment must conform to the terms of the Acknowledgment.<PRTPAGE P="108"/> </P> <P>(viii) If a shipment of CRTs cannot be delivered for any reason to the recycler or the alternate recycler, the exporter of CRTs must renotify EPA of a change in the conditions of the original notification to allow shipment to a new recycler in accordance with paragraph (a)(5)(vi) of this section and obtain another Acknowledgment of Consent to Export CRTs.</P> <P>(ix) Exporters must keep copies of notifications and Acknowledgments of Consent to Export CRTs for a period of three years following receipt of the Acknowledgment.</P> <P>(b) <E T="03">Requirements for used CRT processing:</E> Used, broken CRTs undergoing CRT processing as defined in § 260.10 of this chapter are not solid wastes if they meet the following requirements:</P> <P>(1) <E T="03">Storage.</E> Used, broken CRTs undergoing processing are subject to the requirement of paragraph (a)(4) of this section.</P> <P>(2) <E T="03">Processing.</E> </P> <P>(i) All activities specified in paragraphs (2) and (3) of the definition of “CRT processing” in § 260.10 of this chapter must be performed within a building with a roof, floor, and walls; and</P> <P>(ii) No activities may be performed that use temperatures high enough to volatilize lead from CRTs.</P> <P>(c) <E T="03">Processed CRT glass sent to CRT glass making or lead smelting:</E> Glass from used CRTs that is destined for recycling at a CRT glass manufacturer or a lead smelter after processing is not a solid waste unless it is speculatively accumulated as defined in § 261.1(c)(8).</P> <P>(d) <E T="03">Use constituting disposal:</E> Glass from used CRTs that is used in a manner constituting disposal must comply with the requirements of 40 CFR part 266, subpart C instead of the requirements of this section.</P> </SECTION> <SECTION> <SECTNO>§ 261.40</SECTNO> <SUBJECT>Conditional Exclusion for Used, Intact Cathode Ray Tubes (CRTs) Exported for Recycling.</SUBJECT> <P>Used, intact CRTs exported for recycling are not solid wastes if they meet the notice and consent conditions of § 261.39(a)(5), and if they are not speculatively accumulated as defined in § 261.1(c)(8).</P> </SECTION> <SECTION> <SECTNO>§ 261.41</SECTNO> <SUBJECT>Notification and Recordkeeping for Used, Intact Cathode Ray Tubes (CRTs) Exported for Reuse.</SUBJECT> <P>(a) Persons who export used, intact CRTs for reuse must send a one-time notification to the Regional Administrator. The notification must include a statement that the notifier plans to export used, intact CRTs for reuse, the notifier's name, address, and EPA ID number (if applicable) and the name and phone number of a contact person.</P> <P>(b) Persons who export used, intact CRTs for reuse must keep copies of normal business records, such as contracts, demonstrating that each shipment of exported CRTs will be reused. This documentation must be retained for a period of at least three years from the date the CRTs were exported.</P> </SECTION> <APPENDIX> <EAR>Pt. 261, App. I</EAR> <HD SOURCE="HED">Appendix I to Part 261—Representative Sampling Methods</HD> <P>The methods and equipment used for sampling waste materials will vary with the form and consistency of the waste materials to be sampled. Samples collected using the sampling protocols listed below, for sampling waste with properties similar to the indicated materials, will be considered by the Agency to be representative of the waste.</P> <FP SOURCE="FP-1">Extremely viscous liquid—ASTM Standard D140-70 Crushed or powdered material—ASTM Standard D346-75 Soil or rock-like material—ASTM Standard D420-69 Soil-like material—ASTM Standard D1452-65</FP> <FP SOURCE="FP-1">Fly Ash-like material—ASTM Standard D2234-76 [ASTM Standards are available from ASTM, 1916 Race St., Philadelphia, PA 19103]</FP> <FP SOURCE="FP-1">Containerized liquid waste—“COLIWASA.”</FP> <FP SOURCE="FP-1">Liquid waste in pits, ponds, lagoons, and similar reservoirs—“Pond Sampler.”</FP> <P>This manual also contains additional information on application of these protocols.</P> <CITA>[45 FR 33119, May 19, 1980, as amended at 70 FR 34562, June 14, 2005]</CITA> </APPENDIX> <APPENDIX> <PRTPAGE P="109"/> <RESERVED>Appendix II to Part 261 [Reserved]</RESERVED> </APPENDIX> <APPENDIX> <RESERVED>Appendix III to Part 261 [Reserved]</RESERVED> </APPENDIX> <APPENDIX> <RESERVED>Appendix IV to Part 261 [Reserved for Radioactive Waste Test Methods]</RESERVED> </APPENDIX> <APPENDIX> <RESERVED>Appendix V to Part 261 [Reserved for Infectious Waste Treatment Specifications]</RESERVED> </APPENDIX> <APPENDIX> <RESERVED>Appendix VI to Part 261 [Reserved for Etiologic Agents]</RESERVED> </APPENDIX> <APPENDIX> <EAR>Pt. 261, App. VII</EAR> <HD SOURCE="HED">Appendix VII to Part 261—Basis for Listing Hazardous Waste</HD> <GPOTABLE CDEF="xs24,r50" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">EPA hazardous waste No.</CHED> <CHED H="1">Hazardous constituents for which listed</CHED> </BOXHD> <ROW> <ENT I="01">F001</ENT> <ENT>Tetrachloroethylene, methylene chloride trichloroethylene, 1,1,1-trichloroethane, carbon tetrachloride, chlorinated fluorocarbons.</ENT> </ROW> <ROW> <ENT I="01">F002</ENT> <ENT>Tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2,2-trifluoroethane, ortho-dichlorobenzene, trichlorofluoromethane.</ENT> </ROW> <ROW> <ENT I="01">F003</ENT> <ENT>N.A.</ENT> </ROW> <ROW> <ENT I="01">F004</ENT> <ENT>Cresols and cresylic acid, nitrobenzene.</ENT> </ROW> <ROW> <ENT I="01">F005</ENT> <ENT>Toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, 2-ethoxyethanol, benzene, 2-nitropropane.</ENT> </ROW> <ROW> <ENT I="01">F006</ENT> <ENT>Cadmium, hexavalent chromium, nickel, cyanide (complexed).</ENT> </ROW> <ROW> <ENT I="01">F007</ENT> <ENT>Cyanide (salts).</ENT> </ROW> <ROW> <ENT I="01">F008</ENT> <ENT>Cyanide (salts).</ENT> </ROW> <ROW> <ENT I="01">F009</ENT> <ENT>Cyanide (salts).</ENT> </ROW> <ROW> <ENT I="01">F010</ENT> <ENT>Cyanide (salts).</ENT> </ROW> <ROW> <ENT I="01">F011</ENT> <ENT>Cyanide (salts).</ENT> </ROW> <ROW> <ENT I="01">F012</ENT> <ENT>Cyanide (complexed).</ENT> </ROW> <ROW> <ENT I="01">F019</ENT> <ENT>Hexavalent chromium, cyanide (complexed).</ENT> </ROW> <ROW> <ENT I="01">F020</ENT> <ENT>Tetra- and pentachlorodibenzo-<E T="03">p</E>-dioxins; tetra and pentachlorodi-benzofurans; tri- and -tetrachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts.</ENT> </ROW> <ROW> <ENT I="01">F021</ENT> <ENT>Penta- and hexachlorodibenzo-<E T="03">p-</E> dioxins; penta- and hexachlorodibenzofurans; pentachlorophenol and its derivatives.</ENT> </ROW> <ROW> <ENT I="01">F022</ENT> <ENT>Tetra-, penta-, and hexachlorodibenzo-<E T="03">p</E>-dioxins; tetra-, penta-, and hexachlorodibenzofurans.</ENT> </ROW> <ROW> <ENT I="01">F023</ENT> <ENT>Tetra-, and pentachlorodibenzo-<E T="03">p</E>-dioxins; tetra- and pentachlorodibenzofurans; tri- and --tetra-chlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts.</ENT> </ROW> <ROW> <ENT I="01">F024</ENT> <ENT>Chloromethane, dichloromethane, trichloromethane, carbon tetrachloride, chloroethylene, 1,1-dichloroethane, 1,2-dichloroethane, trans-1-2-dichloroethylene, 1,1-dichloroethylene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethylene, 1,1,1,2-tetra-chloroethane, 1,1,2,2-tetrachloroethane, tetrachloroethylene, pentachloroethane, hexachloroethane, allyl chloride (3-chloropropene), dichloropropane, dichloropropene, 2-chloro-1,3-butadiene, hexachloro-1,3-butadiene, hexachlorocyclopentadiene, hexachlorocyclohexane, benzene, chlorbenzene, dichlorobenzenes, 1,2,4-trichlorobenzene, tetrachlorobenzene, pentachlorobenzene, hexachlorobenzene, toluene, naphthalene.</ENT> </ROW> <ROW> <ENT I="01">F025</ENT> <ENT>Chloromethane; Dichloromethane; Trichloromethane; Carbon tetrachloride; Chloroethylene; 1,1-Dichloroethane; 1,2-Dichloroethane; trans-1,2-Dichloroethylene; 1,1-Dichloroethylene; 1,1,1-Trichloroethane; 1,1,2-Trichloroethane; Trichloroethylene; 1,1,1,2-Tetrachloroethane; 1,1,2,2-Tetrachloroethane; Tetrachloroethylene; Pentachloroethane; Hexachloroethane; Allyl chloride (3-Chloropropene); Dichloropropane; Dichloropropene; 2-Chloro-1,3-butadiene; Hexachloro-1,3-butadiene; Hexachlorocyclopentadiene; Benzene; Chlorobenzene; Dichlorobenzene; 1,2,4-Tri-chlorobenzene; Tetrachlorobenzene; Pentachlorobenzene; Hexachlorobenzene; Toluene; Naphthalene.</ENT> </ROW> <ROW> <ENT I="01">F026</ENT> <ENT>Tetra-, penta-, and hexachlorodibenzo-<E T="03">p</E>-dioxins; tetra-, penta-, and hexachlorodibenzofurans.</ENT> </ROW> <ROW> <ENT I="01">F027</ENT> <ENT>Tetra-, penta-, and hexachlorodibenzo-<E T="03">p-</E> dioxins; tetra-, penta-, and hexachlorodibenzofurans; tri-, tetra-, and pentachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts.</ENT> </ROW> <ROW> <ENT I="01">F028</ENT> <ENT>Tetra-, penta-, and hexachlorodibenzo-<E T="03">p-</E> dioxins; tetra-, penta-, and hexachlorodibenzofurans; tri-, tetra-, and pentachlorophenols and their chlorophenoxy derivative acids, esters, ethers, amine and other salts.</ENT> </ROW> <ROW> <ENT I="01">F032</ENT> <ENT>Benz(a)anthracene, benzo(a)pyrene, dibenz(a,h)-anthracene, indeno(1,2,3-cd)pyrene, pentachlorophenol, arsenic, chromium, tetra-, penta-, hexa-, heptachlorodibenzo-p-dioxins, tetra-, penta-, hexa-, heptachlorodibenzofurans.</ENT> </ROW> <ROW> <ENT I="01">F034</ENT> <ENT>Benz(a)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene, naphthalene, arsenic, chromium.</ENT> </ROW> <ROW> <ENT I="01">F035</ENT> <ENT>Arsenic, chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">F037</ENT> <ENT>Benzene, benzo(a)pyrene, chrysene, lead, chromium.</ENT> </ROW> <ROW> <ENT I="01">F038</ENT> <ENT>Benzene, benzo(a)pyrene, chrysene, lead, chromium.</ENT> </ROW> <ROW> <ENT I="01">F039</ENT> <ENT>All constituents for which treatment standards are specified for multi-source leachate (wastewaters and nonwastewaters) under 40 CFR 268.43, Table CCW.</ENT> </ROW> <ROW> <PRTPAGE P="110"/> <ENT I="01">K001</ENT> <ENT>Pentachlorophenol, phenol, 2-chlorophenol, p-chloro-m-cresol, 2,4-dimethylphenyl, 2,4-dinitrophenol, trichlorophenols, tetrachlorophenols, 2,4-dinitrophenol, creosote, chrysene, naphthalene, fluoranthene, benzo(b)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, benz(a)anthracene, dibenz(a)anthracene, acenaphthalene.</ENT> </ROW> <ROW> <ENT I="01">K002</ENT> <ENT>Hexavalent chromium, lead</ENT> </ROW> <ROW> <ENT I="01">K003</ENT> <ENT>Hexavalent chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">K004</ENT> <ENT>Hexavalent chromium.</ENT> </ROW> <ROW> <ENT I="01">K005</ENT> <ENT>Hexavalent chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">K006</ENT> <ENT>Hexavalent chromium.</ENT> </ROW> <ROW> <ENT I="01">K007</ENT> <ENT>Cyanide (complexed), hexavalent chromium.</ENT> </ROW> <ROW> <ENT I="01">K008</ENT> <ENT>Hexavalent chromium.</ENT> </ROW> <ROW> <ENT I="01">K009</ENT> <ENT>Chloroform, formaldehyde, methylene chloride, methyl chloride, paraldehyde, formic acid.</ENT> </ROW> <ROW> <ENT I="01">K010</ENT> <ENT>Chloroform, formaldehyde, methylene chloride, methyl chloride, paraldehyde, formic acid, chloroacetaldehyde.</ENT> </ROW> <ROW> <ENT I="01">K011</ENT> <ENT>Acrylonitrile, acetonitrile, hydrocyanic acid.</ENT> </ROW> <ROW> <ENT I="01">K013</ENT> <ENT>Hydrocyanic acid, acrylonitrile, acetonitrile.</ENT> </ROW> <ROW> <ENT I="01">K014</ENT> <ENT>Acetonitrile, acrylamide.</ENT> </ROW> <ROW> <ENT I="01">K015</ENT> <ENT>Benzyl chloride, chlorobenzene, toluene, benzotrichloride.</ENT> </ROW> <ROW> <ENT I="01">K016</ENT> <ENT>Hexachlorobenzene, hexachlorobutadiene, carbon tetrachloride, hexachloroethane, perchloroethylene.</ENT> </ROW> <ROW> <ENT I="01">K017</ENT> <ENT>Epichlorohydrin, chloroethers [bis(chloromethyl) ether and bis (2-chloroethyl) ethers], trichloropropane, dichloropropanols.</ENT> </ROW> <ROW> <ENT I="01">K018</ENT> <ENT>1,2-dichloroethane, trichloroethylene, hexachlorobutadiene, hexachlorobenzene.</ENT> </ROW> <ROW> <ENT I="01">K019</ENT> <ENT>Ethylene dichloride, 1,1,1-trichloroethane, 1,1,2-trichloroethane, tetrachloroethanes (1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane), trichloroethylene, tetrachloroethylene, carbon tetrachloride, chloroform, vinyl chloride, vinylidene chloride.</ENT> </ROW> <ROW> <ENT I="01">K020</ENT> <ENT>Ethylene dichloride, 1,1,1-trichloroethane, 1,1,2-trichloroethane, tetrachloroethanes (1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane), trichloroethylene, tetrachloroethylene, carbon tetrachloride, chloroform, vinyl chloride, vinylidene chloride.</ENT> </ROW> <ROW> <ENT I="01">K021</ENT> <ENT>Antimony, carbon tetrachloride, chloroform.</ENT> </ROW> <ROW> <ENT I="01">K022</ENT> <ENT>Phenol, tars (polycyclic aromatic hydrocarbons).</ENT> </ROW> <ROW> <ENT I="01">K023</ENT> <ENT>Phthalic anhydride, maleic anhydride.</ENT> </ROW> <ROW> <ENT I="01">K024</ENT> <ENT>Phthalic anhydride, 1,4-naphthoquinone.</ENT> </ROW> <ROW> <ENT I="01">K025</ENT> <ENT>Meta-dinitrobenzene, 2,4-dinitrotoluene.</ENT> </ROW> <ROW> <ENT I="01">K026</ENT> <ENT>Paraldehyde, pyridines, 2-picoline.</ENT> </ROW> <ROW> <ENT I="01">K027</ENT> <ENT>Toluene diisocyanate, toluene-2, 4-diamine.</ENT> </ROW> <ROW> <ENT I="01">K028</ENT> <ENT>1,1,1-trichloroethane, vinyl chloride.</ENT> </ROW> <ROW> <ENT I="01">K029</ENT> <ENT>1,2-dichloroethane, 1,1,1-trichloroethane, vinyl chloride, vinylidene chloride, chloroform.</ENT> </ROW> <ROW> <ENT I="01">K030</ENT> <ENT>Hexachlorobenzene, hexachlorobutadiene, hexachloroethane, 1,1,1,2-tetrachloroethane, 1,1,2,2-tetrachloroethane, ethylene dichloride.</ENT> </ROW> <ROW> <ENT I="01">K031</ENT> <ENT>Arsenic.</ENT> </ROW> <ROW> <ENT I="01">K032</ENT> <ENT>Hexachlorocyclopentadiene.</ENT> </ROW> <ROW> <ENT I="01">K033</ENT> <ENT>Hexachlorocyclopentadiene.</ENT> </ROW> <ROW> <ENT I="01">K034</ENT> <ENT>Hexachlorocyclopentadiene.</ENT> </ROW> <ROW> <ENT I="01">K035</ENT> <ENT>Creosote, chrysene, naphthalene, fluoranthene benzo(b) fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd) pyrene, benzo(a)anthracene, dibenzo(a)anthracene, acenaphthalene.</ENT> </ROW> <ROW> <ENT I="01">K036</ENT> <ENT>Toluene, phosphorodithioic and phosphorothioic acid esters.</ENT> </ROW> <ROW> <ENT I="01">K037</ENT> <ENT>Toluene, phosphorodithioic and phosphorothioic acid esters.</ENT> </ROW> <ROW> <ENT I="01">K038</ENT> <ENT>Phorate, formaldehyde, phosphorodithioic and phosphorothioic acid esters.</ENT> </ROW> <ROW> <ENT I="01">K039</ENT> <ENT>Phosphorodithioic and phosphorothioic acid esters.</ENT> </ROW> <ROW> <ENT I="01">K040</ENT> <ENT>Phorate, formaldehyde, phosphorodithioic and phosphorothioic acid esters.</ENT> </ROW> <ROW> <ENT I="01">K041</ENT> <ENT>Toxaphene.</ENT> </ROW> <ROW> <ENT I="01">K042</ENT> <ENT>Hexachlorobenzene, ortho-dichlorobenzene.</ENT> </ROW> <ROW> <ENT I="01">K043</ENT> <ENT>2,4-dichlorophenol, 2,6-dichlorophenol, 2,4,6-trichlorophenol.</ENT> </ROW> <ROW> <ENT I="01">K044</ENT> <ENT>N.A.</ENT> </ROW> <ROW> <ENT I="01">K045</ENT> <ENT>N.A.</ENT> </ROW> <ROW> <ENT I="01">K046</ENT> <ENT>Lead.</ENT> </ROW> <ROW> <ENT I="01">K047</ENT> <ENT>N.A.</ENT> </ROW> <ROW> <ENT I="01">K048</ENT> <ENT>Hexavalent chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">K049</ENT> <ENT>Hexavalent chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">K050</ENT> <ENT>Hexavalent chromium.</ENT> </ROW> <ROW> <ENT I="01">K051</ENT> <ENT>Hexavalent chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">K052</ENT> <ENT>Lead.</ENT> </ROW> <ROW> <ENT I="01">K060</ENT> <ENT>Cyanide, napthalene, phenolic compounds, arsenic.</ENT> </ROW> <ROW> <ENT I="01">K061</ENT> <ENT>Hexavalent chromium, lead, cadmium.</ENT> </ROW> <ROW> <ENT I="01">K062</ENT> <ENT>Hexavalent chromium, lead.</ENT> </ROW> <ROW> <ENT I="01">K064</ENT> <ENT>Lead, cadmium.</ENT> </ROW> <ROW> <ENT I="01">K065</ENT> <ENT>Do.</ENT> </ROW> <ROW> <ENT I="01">K066</ENT> <ENT>Do.</ENT> </ROW> <ROW> <ENT I="01">K069</ENT> <ENT>Hexavalent chromium, lead, cadmium.</ENT> </ROW> <ROW> <ENT I="01">K071</ENT> <ENT>Mercury.</ENT> </ROW> <ROW> <ENT I="01">K073</ENT> <ENT>Chloroform, carbon tetrachloride, hexachloroethane, trichloroethane, tetrachloroethylene, dichloroethylene, 1,1,2,2-tetrachloroethane.</ENT> </ROW> <ROW> <ENT I="01">K083</ENT> <ENT>Aniline, diphenylamine, nitrobenzene, phenylenediamine.</ENT> </ROW> <ROW> <ENT I="01">K084</ENT> <ENT>Arsenic.</ENT> </ROW> <ROW> <ENT I="01">K085</ENT> <ENT>Benzene, dichlorobenzenes, trichlorobenzenes, tetrachlorobenzenes, pentachlorobenzene, hexachlorobenzene, benzyl chloride.</ENT> </ROW> <ROW> <ENT I="01">K086</ENT> <ENT>Lead, hexavalent chromium.</ENT> </ROW> <ROW> <ENT I="01">K087</ENT> <ENT>Phenol, naphthalene.</ENT> </ROW> <ROW> <ENT I="01">K088</ENT> <ENT>Cyanide (complexes).</ENT> </ROW> <ROW> <ENT I="01">K090</ENT> <ENT>Chromium.</ENT> </ROW> <ROW> <ENT I="01">K091</ENT> <ENT>Do.</ENT> </ROW> <ROW> <ENT I="01">K093</ENT> <ENT>Phthalic anhydride, maleic anhydride.</ENT> </ROW> <ROW> <ENT I="01">K094</ENT> <ENT>Phthalic anhydride.</ENT> </ROW> <ROW> <ENT I="01">K095</ENT> <ENT>1,1,2-trichloroethane, 1,1,1,2-tetrachloroethane, 1,1,2,2-tetrachloroethane.</ENT> </ROW> <ROW> <ENT I="01">K096</ENT> <ENT>1,2-dichloroethane, 1,1,1-trichloroethane, 1,1,2-trichloroethane.</ENT> </ROW> <ROW> <ENT I="01">K097</ENT> <ENT>Chlordane, heptachlor.</ENT> </ROW> <ROW> <ENT I="01">K098</ENT> <ENT>Toxaphene.</ENT> </ROW> <ROW> <ENT I="01">K099</ENT> <ENT>2,4-dichlorophenol, 2,4,6-trichlorophenol.</ENT> </ROW> <ROW> <ENT I="01">K100</ENT> <ENT>Hexavalent chromium, lead, cadmium.</ENT> </ROW> <ROW> <ENT I="01">K101</ENT> <ENT>Arsenic.</ENT> </ROW> <ROW> <ENT I="01">K102</ENT> <ENT>Arsenic.</ENT> </ROW> <ROW> <ENT I="01">K103</ENT> <ENT>Aniline, nitrobenzene, phenylenediamine.</ENT> </ROW> <ROW> <ENT I="01">K104</ENT> <ENT>Aniline, benzene, diphenylamine, nitrobenzene, phenylenediamine.</ENT> </ROW> <ROW> <ENT I="01">K105</ENT> <ENT>Benzene, monochlorobenzene, dichlorobenzenes, 2,4,6-trichlorophenol.</ENT> </ROW> <ROW> <ENT I="01">K106</ENT> <ENT>Mercury.</ENT> </ROW> <ROW> <ENT I="01">K107</ENT> <ENT>1,1-Dimethylhydrazine (UDMH).</ENT> </ROW> <ROW> <ENT I="01">K108</ENT> <ENT>1,1-Dimethylhydrazine (UDMH).</ENT> </ROW> <ROW> <ENT I="01">K109</ENT> <ENT>1,1-Dimethylhydrazine (UDMH).</ENT> </ROW> <ROW> <ENT I="01">K110</ENT> <ENT>1,1-Dimethylhydrazine (UDMH).</ENT> </ROW> <ROW> <ENT I="01">K111</ENT> <ENT>2,4-Dinitrotoluene.</ENT> </ROW> <ROW> <ENT I="01">K112</ENT> <ENT>2,4-Toluenediamine, <E T="03">o</E>-toluidine, <E T="03">p</E>-toluidine, aniline.</ENT> </ROW> <ROW> <ENT I="01">K113</ENT> <ENT>2,4-Toluenediamine, <E T="03">o</E>-toluidine, <E T="03">p</E>-toluidine, aniline.</ENT> </ROW> <ROW> <ENT I="01">K114</ENT> <ENT>2,4-Toluenediamine, <E T="03">o</E>-toluidine, <E T="03">p</E>-toluidine.</ENT> </ROW> <ROW> <ENT I="01">K115</ENT> <ENT>2,4-Toluenediamine.</ENT> </ROW> <ROW> <PRTPAGE P="111"/> <ENT I="01">K116</ENT> <ENT>Carbon tetrachloride, tetrachloroethylene, chloroform, phosgene.</ENT> </ROW> <ROW> <ENT I="01">K117</ENT> <ENT>Ethylene dibromide.</ENT> </ROW> <ROW> <ENT I="01">K118</ENT> <ENT>Ethylene dibromide.</ENT> </ROW> <ROW> <ENT I="01">K123</ENT> <ENT>Ethylene thiourea.</ENT> </ROW> <ROW> <ENT I="01">K124</ENT> <ENT>Ethylene thiourea.</ENT> </ROW> <ROW> <ENT I="01">K125</ENT> <ENT>Ethylene thiourea.</ENT> </ROW> <ROW> <ENT I="01">K126</ENT> <ENT>Ethylene thiourea.</ENT> </ROW> <ROW> <ENT I="01">K131</ENT> <ENT>Dimethyl sulfate, methyl bromide.</ENT> </ROW> <ROW> <ENT I="01">K132</ENT> <ENT>Methyl bromide.</ENT> </ROW> <ROW> <ENT I="01">K136</ENT> <ENT>Ethylene dibromide.</ENT> </ROW> <ROW> <ENT I="01">K141</ENT> <ENT>Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene.</ENT> </ROW> <ROW> <ENT I="01">K142</ENT> <ENT>Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene.</ENT> </ROW> <ROW> <ENT I="01">K143</ENT> <ENT>Benzene, benz(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene.</ENT> </ROW> <ROW> <ENT I="01">K144</ENT> <ENT>Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene.</ENT> </ROW> <ROW> <ENT I="01">K145</ENT> <ENT>Benzene, benz(a)anthracene, benzo(a)pyrene, dibenz(a,h)anthracene, naphthalene.</ENT> </ROW> <ROW> <ENT I="01">K147</ENT> <ENT>Benzene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene.</ENT> </ROW> <ROW> <ENT I="01">K148</ENT> <ENT>Benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, dibenz(a,h)anthracene, indeno(1,2,3-cd)pyrene.</ENT> </ROW> <ROW> <ENT I="01">K149</ENT> <ENT>Benzotrichloride, benzyl chloride, chloroform, chloromethane, chlorobenzene, 1,4-dichlorobenzene, hexachlorobenzene, pentachlorobenzene, 1,2,4,5-tetrachlorobenzene, toluene.</ENT> </ROW> <ROW> <ENT I="01">K150</ENT> <ENT>Carbon tetrachloride, chloroform, chloromethane, 1,4-dichlorobenzene, hexachlorobenzene, pentachlorobenzene, 1,2,4,5-tetrachlorobenzene, 1,1,2,2-tetrachloroethane, tetrachloroethylene, 1,2,4-trichlorobenzene.</ENT> </ROW> <ROW> <ENT I="01">K151</ENT> <ENT>Benzene, carbon tetrachloride, chloroform, hexachlorobenzene, pentachlorobenzene, toluene, 1,2,4,5-tetrachlorobenzene, tetrachloroethylene.</ENT> </ROW> <ROW> <ENT I="01">K156</ENT> <ENT>Benomyl, carbaryl, carbendazim, carbofuran, carbosulfan, formaldehyde, methylene chloride, triethylamine.</ENT> </ROW> <ROW> <ENT I="01">K157</ENT> <ENT>Carbon tetrachloride, formaldehyde, methyl chloride, methylene chloride, pyridine, triethylamine.</ENT> </ROW> <ROW> <ENT I="01">K158</ENT> <ENT>Benomyl, carbendazim, carbofuran, carbosulfan, chloroform, methylene chloride.</ENT> </ROW> <ROW> <ENT I="01">K159</ENT> <ENT>Benzene, butylate, eptc, molinate, pebulate, vernolate.</ENT> </ROW> <ROW> <ENT I="01">K161</ENT> <ENT>Antimony, arsenic, metam-sodium, ziram.</ENT> </ROW> <ROW> <ENT I="01">K169</ENT> <ENT>Benzene.</ENT> </ROW> <ROW> <ENT I="01">K170</ENT> <ENT>Benzo(a)pyrene, dibenz(a,h)anthracene, benzo (a) anthracene, benzo (b)fluoranthene, benzo(k)fluoranthene, 3-methylcholanthrene, 7, 12-dimethylbenz(a)anthracene.</ENT> </ROW> <ROW> <ENT I="01">K171</ENT> <ENT>Benzene, arsenic.</ENT> </ROW> <ROW> <ENT I="01">K172</ENT> <ENT>Benzene, arsenic.</ENT> </ROW> <ROW> <ENT I="01">K174</ENT> <ENT>1,2,3,4,6,7,8-Heptachlorodibenzo-p-dioxin (1,2,3,4,6,7,8-HpCDD), 1,2,3,4,6,7,8-Heptachlorodibenzofuran (1,2,3,4,6,7,8-HpCDF), 1,2,3,4,7,8,9-Heptachlorodibenzofuran (1,2,3,6,7,8,9-HpCDF), HxCDDs (All Hexachlorodibenzo-p-dioxins), HxCDFs (All Hexachlorodibenzofurans), PeCDDs (All Pentachlorodibenzo-p-dioxins), OCDD (1,2,3,4,6,7,8,9-Octachlorodibenzo-p-dioxin, OCDF (1,2,3,4,6,7,8,9-Octachlorodibenzofuran), PeCDFs (All Pentachlorodibenzofurans), TCDDs (All tetrachlorodi-benzo-p-dioxins), TCDFs (All tetrachlorodibenzofurans).</ENT> </ROW> <ROW> <ENT I="01">K175</ENT> <ENT>Mercury</ENT> </ROW> <ROW> <ENT I="01">K176</ENT> <ENT>Arsenic, Lead.</ENT> </ROW> <ROW> <ENT I="01">K177</ENT> <ENT>Antimony.</ENT> </ROW> <ROW> <ENT I="01">K178</ENT> <ENT>Thallium.</ENT> </ROW> <ROW> <ENT I="01">K181</ENT> <ENT>Aniline, o-anisidine, 4-chloroaniline, p-cresidine, 2,4-dimethylaniline, 1,2-phenylenediamine, 1,3-phenylenediamine.</ENT> </ROW> <TNOTE>N.A.—Waste is hazardous because it fails the test for the characteristic of ignitability, corrosivity, or reactivity.</TNOTE> </GPOTABLE> <CITA>[46 FR 4619, Jan. 16, 1981]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting Appendix VII, part 261, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </APPENDIX> <APPENDIX> <EAR>Pt. 261, App. VIII</EAR> <HD SOURCE="HED">Appendix VIII to Part 261—Hazardous Constituents</HD> <GPOTABLE CDEF="s100,r100,15,10" COLS="4" OPTS="L2"> <BOXHD> <CHED H="1">Common name</CHED> <CHED H="1">Chemical abstracts name</CHED> <CHED H="1">Chemical abstracts No.</CHED> <CHED H="1">Hazardous waste No.</CHED> </BOXHD> <ROW> <ENT I="01">A2213</ENT> <ENT>Ethanimidothioic acid, 2- (dimethylamino) -N-hydroxy-2-oxo-, methyl ester</ENT> <ENT>30558-43-1</ENT> <ENT>U394</ENT> </ROW> <ROW> <ENT I="01">Acetonitrile</ENT> <ENT>Same</ENT> <ENT>75-05-8</ENT> <ENT>U003</ENT> </ROW> <ROW> <ENT I="01">Acetophenone</ENT> <ENT>Ethanone, 1-phenyl-</ENT> <ENT>98-86-2</ENT> <ENT>U004</ENT> </ROW> <ROW> <ENT I="01">2-Acetylaminefluarone</ENT> <ENT>Acetamide, N-9H-fluoren-2-yl-</ENT> <ENT>53-96-3</ENT> <ENT>U005</ENT> </ROW> <ROW> <ENT I="01">Acetyl chloride</ENT> <ENT>Same</ENT> <ENT>75-36-5</ENT> <ENT>U006</ENT> </ROW> <ROW> <ENT I="01">1-Acetyl-2-thiourea</ENT> <ENT>Acetamide, N-(aminothioxomethyl)-</ENT> <ENT>591-08-2</ENT> <ENT>P002</ENT> </ROW> <ROW> <ENT I="01">Acrolein</ENT> <ENT>2-Propenal</ENT> <ENT>107-02-8</ENT> <ENT>P003</ENT> </ROW> <ROW> <ENT I="01">Acrylamide</ENT> <ENT>2-Propenamide</ENT> <ENT>79-06-1</ENT> <ENT>U007</ENT> </ROW> <ROW> <ENT I="01">Acrylonitrile</ENT> <ENT>2-Propenenitrile</ENT> <ENT>107-13-1</ENT> <ENT>U009</ENT> </ROW> <ROW> <ENT I="01">Aflatoxins</ENT> <ENT>Same</ENT> <ENT>1402-68-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Aldicarb</ENT> <ENT>Propanal, 2-methyl-2-(methylthio)-, O-[(methylamino)carbonyl]oxime</ENT> <ENT>116-06-3</ENT> <ENT>P070</ENT> </ROW> <ROW> <ENT I="01">Aldicarb sulfone</ENT> <ENT>Propanal, 2-methyl-2- (methylsulfonyl) -, O-[(methylamino) carbonyl] oxime</ENT> <ENT>1646-88-4</ENT> <ENT>P203</ENT> </ROW> <ROW> <PRTPAGE P="112"/> <ENT I="01">Aldrin</ENT> <ENT>1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-10-hexachloro-1,4,4a,5,8,8a-hexahydro-, (1alpha,4alpha,4abeta,5alpha,8alpha, 8abeta)-</ENT> <ENT>309-00-2</ENT> <ENT>P004</ENT> </ROW> <ROW> <ENT I="01">Allyl alcohol</ENT> <ENT>2-Propen-1-ol</ENT> <ENT>107-18-6</ENT> <ENT>P005</ENT> </ROW> <ROW> <ENT I="01">Allyl chloride</ENT> <ENT>1-Propane, 3-chloro</ENT> <ENT>107-05-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Aluminum phosphide</ENT> <ENT>Same</ENT> <ENT>20859-73-8</ENT> <ENT>P006</ENT> </ROW> <ROW> <ENT I="01">4-Aminobiphenyl</ENT> <ENT>[1,1′-Biphenyl]-4-amine</ENT> <ENT>92-67-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">5-(Aminomethyl)-3-isoxazolol</ENT> <ENT>3(2H)-Isoxazolone, 5-(aminomethyl)-</ENT> <ENT>2763-96-4</ENT> <ENT>P007</ENT> </ROW> <ROW> <ENT I="01">4-Aminopyridine</ENT> <ENT>4-Pyridinamine</ENT> <ENT>504-24-5</ENT> <ENT>P008</ENT> </ROW> <ROW> <ENT I="01">Amitrole</ENT> <ENT>1H-1,2,4-Triazol-3-amine</ENT> <ENT>61-82-5</ENT> <ENT>U011</ENT> </ROW> <ROW> <ENT I="01">Ammonium vanadate</ENT> <ENT>Vanadic acid, ammonium salt</ENT> <ENT>7803-55-6</ENT> <ENT>P119</ENT> </ROW> <ROW> <ENT I="01">Aniline</ENT> <ENT>Benzenamine</ENT> <ENT>62-53-3</ENT> <ENT>U012</ENT> </ROW> <ROW> <ENT I="01">o-Anisidine (2-methoxyaniline)</ENT> <ENT>Benzenamine, 2-Methoxy-</ENT> <ENT>90-04-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Antimony</ENT> <ENT>Same</ENT> <ENT>7440-36-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Antimony compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Aramite</ENT> <ENT>Sulfurous acid, 2-chloroethyl 2-[4-(1,1-dimethylethyl)phenoxy]-1-methylethyl ester</ENT> <ENT>140-57-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Arsenic</ENT> <ENT>Same</ENT> <ENT>7440-38-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Arsenic compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Arsenic acid</ENT> <ENT>Arsenic acid H<E T="52">3</E> AsO<E T="52">4</E> </ENT> <ENT>7778-39-4</ENT> <ENT>P010</ENT> </ROW> <ROW> <ENT I="01">Arsenic pentoxide</ENT> <ENT>Arsenic oxide As<E T="52">2</E> O<E T="52">5</E> </ENT> <ENT>1303-28-2</ENT> <ENT>P011</ENT> </ROW> <ROW> <ENT I="01">Arsenic trioxide</ENT> <ENT>Arsenic oxide As<E T="52">2</E> O<E T="52">3</E> </ENT> <ENT>1327-53-3</ENT> <ENT>P012</ENT> </ROW> <ROW> <ENT I="01">Auramine</ENT> <ENT>Benzenamine, 4,4′-carbonimidoylbis[N,N-dimethyl</ENT> <ENT>492-80-8</ENT> <ENT>U014</ENT> </ROW> <ROW> <ENT I="01">Azaserine</ENT> <ENT>L-Serine, diazoacetate (ester)</ENT> <ENT>115-02-6</ENT> <ENT>U015</ENT> </ROW> <ROW> <ENT I="01">Barban</ENT> <ENT>Carbamic acid, (3-chlorophenyl) -, 4-chloro-2-butynyl ester</ENT> <ENT>101-27-9</ENT> <ENT>U280</ENT> </ROW> <ROW> <ENT I="01">Barium</ENT> <ENT>Same</ENT> <ENT>7440-39-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Barium compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Barium cyanide</ENT> <ENT>Same</ENT> <ENT>542-62-1</ENT> <ENT>P013</ENT> </ROW> <ROW> <ENT I="01">Bendiocarb</ENT> <ENT>1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl carbamate</ENT> <ENT>22781-23-3</ENT> <ENT>U278</ENT> </ROW> <ROW> <ENT I="01">Bendiocarb phenol</ENT> <ENT>1,3-Benzodioxol-4-ol, 2,2-dimethyl-,</ENT> <ENT>22961-82-6</ENT> <ENT>U364</ENT> </ROW> <ROW> <ENT I="01">Benomyl</ENT> <ENT>Carbamic acid, [1- [(butylamino) carbonyl]- 1H-benzimidazol-2-yl] -, methyl ester</ENT> <ENT>17804-35-2</ENT> <ENT>U271</ENT> </ROW> <ROW> <ENT I="01">Benz[c]acridine</ENT> <ENT>Same</ENT> <ENT>225-51-4</ENT> <ENT>U016</ENT> </ROW> <ROW> <ENT I="01">Benz[a]anthracene</ENT> <ENT>Same</ENT> <ENT>56-55-3</ENT> <ENT>U018</ENT> </ROW> <ROW> <ENT I="01">Benzal chloride</ENT> <ENT>Benzene, (dichloromethyl)-</ENT> <ENT>98-87-3</ENT> <ENT>U017</ENT> </ROW> <ROW> <ENT I="01">Benzene</ENT> <ENT>Same</ENT> <ENT>71-43-2</ENT> <ENT>U019</ENT> </ROW> <ROW> <ENT I="01">Benzenearsonic acid</ENT> <ENT>Arsonic acid, phenyl-</ENT> <ENT>98-05-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Benzidine</ENT> <ENT>[1,1′-Biphenyl]-4,4 '-diamine</ENT> <ENT>92-87-5</ENT> <ENT>U021</ENT> </ROW> <ROW> <ENT I="01">Benzo[b]fluoranthene</ENT> <ENT>Benz[e]acephenanthrylene</ENT> <ENT>205-99-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Benzo[j]fluoranthene</ENT> <ENT>Same</ENT> <ENT>205-82-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Benzo(k)fluoranthene</ENT> <ENT>Same</ENT> <ENT>207-08-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Benzo[a]pyrene</ENT> <ENT>Same</ENT> <ENT>50-32-8</ENT> <ENT>U022</ENT> </ROW> <ROW> <ENT I="01">p-Benzoquinone</ENT> <ENT>2,5-Cyclohexadiene-1,4-dione</ENT> <ENT>106-51-4</ENT> <ENT>U197</ENT> </ROW> <ROW> <ENT I="01">Benzotrichloride</ENT> <ENT>Benzene, (trichloromethyl)-</ENT> <ENT>98-07-7</ENT> <ENT>U023</ENT> </ROW> <ROW> <ENT I="01">Benzyl chloride</ENT> <ENT>Benzene, (chloromethyl)-</ENT> <ENT>100-44-7</ENT> <ENT>P028</ENT> </ROW> <ROW> <ENT I="01">Beryllium powder</ENT> <ENT>Same</ENT> <ENT>7440-41-7</ENT> <ENT>P015</ENT> </ROW> <ROW> <ENT I="01">Beryllium compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Bis(pentamethylene)-thiuram tetrasulfide</ENT> <ENT>Piperidine, 1,1′-(tetrathiodicarbonothioyl)-bis-</ENT> <ENT>120-54-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Bromoacetone</ENT> <ENT>2-Propanone, 1-bromo-</ENT> <ENT>598-31-2</ENT> <ENT>P017</ENT> </ROW> <ROW> <ENT I="01">Bromoform</ENT> <ENT>Methane, tribromo-</ENT> <ENT>75-25-2</ENT> <ENT>U225</ENT> </ROW> <ROW> <ENT I="01">4-Bromophenyl phenyl ether</ENT> <ENT>Benzene, 1-bromo-4-phenoxy-</ENT> <ENT>101-55-3</ENT> <ENT>U030</ENT> </ROW> <ROW> <ENT I="01">Brucine</ENT> <ENT>Strychnidin-10-one, 2,3-dimethoxy-</ENT> <ENT>357-57-3</ENT> <ENT>P018</ENT> </ROW> <ROW> <ENT I="01">Butyl benzyl phthalate</ENT> <ENT>1,2-Benzenedicarboxylic acid, butyl phenylmethyl ester</ENT> <ENT>85-68-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Butylate</ENT> <ENT>Carbamothioic acid, bis(2-methylpropyl)-, S-ethyl ester</ENT> <ENT>2008-41-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Cacodylic acid</ENT> <ENT>Arsinic acid, dimethyl-</ENT> <ENT>75-60-5</ENT> <ENT>U136</ENT> </ROW> <ROW> <ENT I="01">Cadmium</ENT> <ENT>Same</ENT> <ENT>7440-43-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Cadmium compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Calcium chromate</ENT> <ENT>Chromic acid H<E T="52">2</E> CrO<E T="52">4</E>, calcium salt</ENT> <ENT>13765-19-0</ENT> <ENT>U032</ENT> </ROW> <ROW> <ENT I="01">Calcium cyanide</ENT> <ENT>Calcium cyanide Ca(CN)<E T="52">2</E> </ENT> <ENT>592-01-8</ENT> <ENT>P021</ENT> </ROW> <ROW> <ENT I="01">Carbaryl</ENT> <ENT>1-Naphthalenol, methylcarbamate</ENT> <ENT>63-25-2</ENT> <ENT>U279</ENT> </ROW> <ROW> <ENT I="01">Carbendazim</ENT> <ENT>Carbamic acid, 1H-benzimidazol-2-yl, methyl ester</ENT> <ENT>10605-21-7</ENT> <ENT>U372</ENT> </ROW> <ROW> <ENT I="01">Carbofuran</ENT> <ENT>7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, methylcarbamate</ENT> <ENT>1563-66-2</ENT> <ENT>P127</ENT> </ROW> <ROW> <ENT I="01">Carbofuran phenol</ENT> <ENT>7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-</ENT> <ENT>1563-38-8</ENT> <ENT>U367</ENT> </ROW> <ROW> <ENT I="01">Carbon disulfide</ENT> <ENT>Same</ENT> <ENT>75-15-0</ENT> <ENT>P022</ENT> </ROW> <ROW> <PRTPAGE P="113"/> <ENT I="01">Carbon oxyfluoride</ENT> <ENT>Carbonic difluoride</ENT> <ENT>353-50-4</ENT> <ENT>U033</ENT> </ROW> <ROW> <ENT I="01">Carbon tetrachloride</ENT> <ENT>Methane, tetrachloro-</ENT> <ENT>56-23-5</ENT> <ENT>U211</ENT> </ROW> <ROW> <ENT I="01">Carbosulfan</ENT> <ENT>Carbamic acid, [(dibutylamino) thio] methyl-, 2,3-dihydro-2,2-dimethyl-7-benzofuranyl ester</ENT> <ENT>55285-14-8</ENT> <ENT>P189</ENT> </ROW> <ROW> <ENT I="01">Chloral</ENT> <ENT>Acetaldehyde, trichloro-</ENT> <ENT>75-87-6</ENT> <ENT>U034</ENT> </ROW> <ROW> <ENT I="01">Chlorambucil</ENT> <ENT>Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-</ENT> <ENT>305-03-3</ENT> <ENT>U035</ENT> </ROW> <ROW> <ENT I="01">Chlordane</ENT> <ENT>4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-</ENT> <ENT>57-74-9</ENT> <ENT>U036</ENT> </ROW> <ROW> <ENT I="01">Chlordane (alpha and gamma isomers)</ENT> <ENT/> <ENT/> <ENT>U036</ENT> </ROW> <ROW> <ENT I="01">Chlorinated benzenes, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Chlorinated ethane, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Chlorinated fluorocarbons, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Chlorinated naphthalene, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Chlorinated phenol, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Chlornaphazin</ENT> <ENT>Naphthalenamine, N,N′-bis(2-chloroethyl)-</ENT> <ENT>494-03-1</ENT> <ENT>U026</ENT> </ROW> <ROW> <ENT I="01">Chloroacetaldehyde</ENT> <ENT>Acetaldehyde, chloro-</ENT> <ENT>107-20-0</ENT> <ENT>P023</ENT> </ROW> <ROW> <ENT I="01">Chloroalkyl ethers, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">p-Chloroaniline</ENT> <ENT>Benzenamine, 4-chloro-</ENT> <ENT>106-47-8</ENT> <ENT>P024</ENT> </ROW> <ROW> <ENT I="01">Chlorobenzene</ENT> <ENT>Benzene, chloro-</ENT> <ENT>108-90-7</ENT> <ENT>U037</ENT> </ROW> <ROW> <ENT I="01">Chlorobenzilate</ENT> <ENT>Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)-alpha-hydroxy-, ethyl ester</ENT> <ENT>510-15-6</ENT> <ENT>U038</ENT> </ROW> <ROW> <ENT I="01">p-Chloro-m-cresol</ENT> <ENT>Phenol, 4-chloro-3-methyl-</ENT> <ENT>59-50-7</ENT> <ENT>U039</ENT> </ROW> <ROW> <ENT I="01">2-Chloroethyl vinyl ether</ENT> <ENT>Ethene, (2-chloroethoxy)-</ENT> <ENT>110-75-8</ENT> <ENT>U042</ENT> </ROW> <ROW> <ENT I="01">Chloroform</ENT> <ENT>Methane, trichloro-</ENT> <ENT>67-66-3</ENT> <ENT>U044</ENT> </ROW> <ROW> <ENT I="01">Chloromethyl methyl ether</ENT> <ENT>Methane, chloromethoxy-</ENT> <ENT>107-30-2</ENT> <ENT>U046</ENT> </ROW> <ROW> <ENT I="01">beta-Chloronaphthalene</ENT> <ENT>Naphthalene, 2-chloro-</ENT> <ENT>91-58-7</ENT> <ENT>U047</ENT> </ROW> <ROW> <ENT I="01">o-Chlorophenol</ENT> <ENT>Phenol, 2-chloro-</ENT> <ENT>95-57-8</ENT> <ENT>U048</ENT> </ROW> <ROW> <ENT I="01">1-(o-Chlorophenyl)thiourea</ENT> <ENT>Thiourea, (2-chlorophenyl)-</ENT> <ENT>5344-82-1</ENT> <ENT>P026</ENT> </ROW> <ROW> <ENT I="01">Chloroprene</ENT> <ENT>1,3-Butadiene, 2-chloro-</ENT> <ENT>126-99-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">3-Chloropropionitrile</ENT> <ENT>Propanenitrile, 3-chloro-</ENT> <ENT>542-76-7</ENT> <ENT>P027</ENT> </ROW> <ROW> <ENT I="01">Chromium</ENT> <ENT>Same</ENT> <ENT>7440-47-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Chromium compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Chrysene</ENT> <ENT>Same</ENT> <ENT>218-01-9</ENT> <ENT>U050</ENT> </ROW> <ROW> <ENT I="01">Citrus red No. 2</ENT> <ENT>2-Naphthalenol, 1-[(2,5-dimethoxyphenyl)azo]-</ENT> <ENT>6358-53-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Coal tar creosote</ENT> <ENT>Same</ENT> <ENT>8007-45-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Copper cyanide</ENT> <ENT>Copper cyanide CuCN</ENT> <ENT>544-92-3</ENT> <ENT>P029</ENT> </ROW> <ROW> <ENT I="01">Copper dimethyldithiocarbamate</ENT> <ENT>Copper, bis(dimethylcarbamodithioato-S,S′)-,</ENT> <ENT>137-29-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Creosote</ENT> <ENT>Same</ENT> <ENT/> <ENT>U051</ENT> </ROW> <ROW> <ENT I="01">p-Cresidine</ENT> <ENT>2-Methoxy-5-methylbenzenamine</ENT> <ENT>120-71-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Cresol (Cresylic acid)</ENT> <ENT>Phenol, methyl-</ENT> <ENT>1319-77-3</ENT> <ENT>U052</ENT> </ROW> <ROW> <ENT I="01">Crotonaldehyde</ENT> <ENT>2-Butenal</ENT> <ENT>4170-30-3</ENT> <ENT>U053</ENT> </ROW> <ROW> <ENT I="01">m-Cumenyl methylcarbamate</ENT> <ENT>Phenol, 3-(methylethyl)-, methyl carbamate</ENT> <ENT>64-00-6</ENT> <ENT>P202</ENT> </ROW> <ROW> <ENT I="01">Cyanides (soluble salts and complexes) N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT>P030</ENT> </ROW> <ROW> <ENT I="01">Cyanogen</ENT> <ENT>Ethanedinitrile</ENT> <ENT>460-19-5</ENT> <ENT>P031</ENT> </ROW> <ROW> <ENT I="01">Cyanogen bromide</ENT> <ENT>Cyanogen bromide (CN)Br</ENT> <ENT>506-68-3</ENT> <ENT>U246</ENT> </ROW> <ROW> <ENT I="01">Cyanogen chloride</ENT> <ENT>Cyanogen chloride (CN)Cl</ENT> <ENT>506-77-4</ENT> <ENT>P033</ENT> </ROW> <ROW> <ENT I="01">Cycasin</ENT> <ENT>beta-D-Glucopyranoside, (methyl-ONN-azoxy)methyl</ENT> <ENT>14901-08-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Cycloate</ENT> <ENT>Carbamothioic acid, cyclohexylethyl-, S-ethyl ester</ENT> <ENT>1134-23-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">2-Cyclohexyl-4,6-dinitrophenol</ENT> <ENT>Phenol, 2-cyclohexyl-4,6-dinitro-</ENT> <ENT>131-89-5</ENT> <ENT>P034</ENT> </ROW> <ROW> <ENT I="01">Cyclophosphamide</ENT> <ENT>2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-chloroethyl)tetrahydro-, 2-oxide</ENT> <ENT>50-18-0</ENT> <ENT>U058</ENT> </ROW> <ROW> <ENT I="01">2,4-D</ENT> <ENT>Acetic acid, (2,4-dichlorophenoxy)-</ENT> <ENT>94-75-7</ENT> <ENT>U240</ENT> </ROW> <ROW> <ENT I="01">2,4-D, salts, esters</ENT> <ENT/> <ENT/> <ENT>U240</ENT> </ROW> <ROW> <ENT I="01">Daunomycin</ENT> <ENT>5,12-Naphthacenedione, 8-acetyl-10-[(3-amino-2,3,6-trideoxy-alpha-L-lyxo- hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-</ENT> <ENT>20830-81-3</ENT> <ENT>U059</ENT> </ROW> <ROW> <ENT I="01">Dazomet</ENT> <ENT>2H-1,3,5-thiadiazine-2-thione, tetrahydro-3,5-dimethyl</ENT> <ENT>533-74-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">DDD</ENT> <ENT>Benzene, 1,1′-(2,2-dichloroethylidene)bis[4-chloro-</ENT> <ENT>72-54-8</ENT> <ENT>U060</ENT> </ROW> <ROW> <ENT I="01">DDE</ENT> <ENT>Benzene, 1,1′-(dichloroethenylidene)bis[4-chloro-</ENT> <ENT>72-55-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">DDT</ENT> <ENT>Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4-chloro-</ENT> <ENT>50-29-3</ENT> <ENT>U061</ENT> </ROW> <ROW> <ENT I="01">Diallate</ENT> <ENT>Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-dichloro-2-propenyl) ester</ENT> <ENT>2303-16-4</ENT> <ENT>U062</ENT> </ROW> <ROW> <PRTPAGE P="114"/> <ENT I="01">Dibenz[a,h]acridine</ENT> <ENT>Same</ENT> <ENT>226-36-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dibenz[a,j]acridine</ENT> <ENT>Same</ENT> <ENT>224-42-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dibenz[a,h]anthracene</ENT> <ENT>Same</ENT> <ENT>53-70-3</ENT> <ENT>U063</ENT> </ROW> <ROW> <ENT I="01">7H-Dibenzo[c,g]carbazole</ENT> <ENT>Same</ENT> <ENT>194-59-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dibenzo[a,e]pyrene</ENT> <ENT>Naphtho[1,2,3,4-def]chrysene</ENT> <ENT>192-65-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dibenzo[a,h]pyrene</ENT> <ENT>Dibenzo[b,def]chrysene</ENT> <ENT>189-64-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dibenzo[a,i]pyrene</ENT> <ENT>Benzo[rst]pentaphene</ENT> <ENT>189-55-9</ENT> <ENT>U064</ENT> </ROW> <ROW> <ENT I="01">1,2-Dibromo-3-chloropropane</ENT> <ENT>Propane, 1,2-dibromo-3-chloro-</ENT> <ENT>96-12-8</ENT> <ENT>U066</ENT> </ROW> <ROW> <ENT I="01">Dibutyl phthalate</ENT> <ENT>1,2-Benzenedicarboxylic acid, dibutyl ester</ENT> <ENT>84-74-2</ENT> <ENT>U069</ENT> </ROW> <ROW> <ENT I="01">o-Dichlorobenzene</ENT> <ENT>Benzene, 1,2-dichloro-</ENT> <ENT>95-50-1</ENT> <ENT>U070</ENT> </ROW> <ROW> <ENT I="01">m-Dichlorobenzene</ENT> <ENT>Benzene, 1,3-dichloro-</ENT> <ENT>541-73-1</ENT> <ENT>U071</ENT> </ROW> <ROW> <ENT I="01">p-Dichlorobenzene</ENT> <ENT>Benzene, 1,4-dichloro-</ENT> <ENT>106-46-7</ENT> <ENT>U072</ENT> </ROW> <ROW> <ENT I="01">Dichlorobenzene, N.O.S. <SU>1</SU> </ENT> <ENT>Benzene, dichloro-</ENT> <ENT>25321-22-6</ENT> <ENT/> </ROW> <ROW> <ENT I="01">3,3′-Dichlorobenzidine</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dichloro-</ENT> <ENT>91-94-1</ENT> <ENT>U073</ENT> </ROW> <ROW> <ENT I="01">1,4-Dichloro-2-butene</ENT> <ENT>2-Butene, 1,4-dichloro-</ENT> <ENT>764-41-0</ENT> <ENT>U074</ENT> </ROW> <ROW> <ENT I="01">Dichlorodifluoromethane</ENT> <ENT>Methane, dichlorodifluoro-</ENT> <ENT>75-71-8</ENT> <ENT>U075</ENT> </ROW> <ROW> <ENT I="01">Dichloroethylene, N.O.S. <SU>1</SU> </ENT> <ENT>Dichloroethylene</ENT> <ENT>25323-30-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,1-Dichloroethylene</ENT> <ENT>Ethene, 1,1-dichloro-</ENT> <ENT>75-35-4</ENT> <ENT>U078</ENT> </ROW> <ROW> <ENT I="01">1,2-Dichloroethylene</ENT> <ENT>Ethene, 1,2-dichloro-, (E)-</ENT> <ENT>156-60-5</ENT> <ENT>U079</ENT> </ROW> <ROW> <ENT I="01">Dichloroethyl ether</ENT> <ENT>Ethane, 1,1′oxybis[2-chloro-</ENT> <ENT>111-44-4</ENT> <ENT>U025</ENT> </ROW> <ROW> <ENT I="01">Dichloroisopropyl ether</ENT> <ENT>Propane, 2,2′-oxybis[2-chloro-</ENT> <ENT>108-60-1</ENT> <ENT>U027</ENT> </ROW> <ROW> <ENT I="01">Dichloromethoxy ethane</ENT> <ENT>Ethane, 1,1′-[methylenebis(oxy)]bis[2-chloro-</ENT> <ENT>111-91-1</ENT> <ENT>U024</ENT> </ROW> <ROW> <ENT I="01">Dichloromethyl ether</ENT> <ENT>Methane, oxybis[chloro-</ENT> <ENT>542-88-1</ENT> <ENT>P016</ENT> </ROW> <ROW> <ENT I="01">2,4-Dichlorophenol</ENT> <ENT>Phenol, 2,4-dichloro-</ENT> <ENT>120-83-2</ENT> <ENT>U081</ENT> </ROW> <ROW> <ENT I="01">2,6-Dichlorophenol</ENT> <ENT>Phenol, 2,6-dichloro-</ENT> <ENT>87-65-0</ENT> <ENT>U082</ENT> </ROW> <ROW> <ENT I="01">Dichlorophenylarsine</ENT> <ENT>Arsonous dichloride, phenyl-</ENT> <ENT>696-28-6</ENT> <ENT>P036</ENT> </ROW> <ROW> <ENT I="01">Dichloropropane, N.O.S. <SU>1</SU> </ENT> <ENT>Propane, dichloro-</ENT> <ENT>26638-19-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dichloropropanol, N.O.S. <SU>1</SU> </ENT> <ENT>Propanol, dichloro-</ENT> <ENT>26545-73-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Dichloropropene, N.O.S. <SU>1</SU> </ENT> <ENT>1-Propene, dichloro-</ENT> <ENT>26952-23-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,3-Dichloropropene</ENT> <ENT>1-Propene, 1,3-dichloro-</ENT> <ENT>542-75-6</ENT> <ENT>U084</ENT> </ROW> <ROW> <ENT I="01">Dieldrin</ENT> <ENT>2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2aalpha,3beta,6beta, 6aalpha,7beta,7aalpha)-</ENT> <ENT>60-57-1</ENT> <ENT>P037</ENT> </ROW> <ROW> <ENT I="01">1,2:3,4-Diepoxybutane</ENT> <ENT>2,2′-Bioxirane</ENT> <ENT>1464-53-5</ENT> <ENT>U085</ENT> </ROW> <ROW> <ENT I="01">Diethylarsine</ENT> <ENT>Arsine, diethyl-</ENT> <ENT>692-42-2</ENT> <ENT>P038</ENT> </ROW> <ROW> <ENT I="01">Diethylene glycol, dicarbamate</ENT> <ENT>Ethanol, 2,2′-oxybis-, dicarbamate</ENT> <ENT>5952-26-1</ENT> <ENT>U395</ENT> </ROW> <ROW> <ENT I="01">1,4-Diethyleneoxide</ENT> <ENT>1,4-Dioxane</ENT> <ENT>123-91-1</ENT> <ENT>U108</ENT> </ROW> <ROW> <ENT I="01">Diethylhexyl phthalate</ENT> <ENT>1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester</ENT> <ENT>117-81-7</ENT> <ENT>U028</ENT> </ROW> <ROW> <ENT I="01">N,N′-Diethylhydrazine</ENT> <ENT>Hydrazine, 1,2-diethyl-</ENT> <ENT>1615-80-1</ENT> <ENT>U086</ENT> </ROW> <ROW> <ENT I="01">O,O-Diethyl S-methyl dithiophosphate</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-methyl ester</ENT> <ENT>3288-58-2</ENT> <ENT>U087</ENT> </ROW> <ROW> <ENT I="01">Diethyl-p-nitrophenyl phosphate</ENT> <ENT>Phosphoric acid, diethyl 4-nitrophenyl ester</ENT> <ENT>311-45-5</ENT> <ENT>P041</ENT> </ROW> <ROW> <ENT I="01">Diethyl phthalate</ENT> <ENT>1,2-Benzenedicarboxylic acid, diethyl ester</ENT> <ENT>84-66-2</ENT> <ENT>U088</ENT> </ROW> <ROW> <ENT I="01">O,O-Diethyl O-pyrazinyl phosphoro- thioate</ENT> <ENT>Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester</ENT> <ENT>297-97-2</ENT> <ENT>P040</ENT> </ROW> <ROW> <ENT I="01">Diethylstilbesterol</ENT> <ENT>Phenol, 4,4′-(1,2-diethyl-1,2-ethenediyl)bis-, (E)-</ENT> <ENT>56-53-1</ENT> <ENT>U089</ENT> </ROW> <ROW> <ENT I="01">Dihydrosafrole</ENT> <ENT>1,3-Benzodioxole, 5-propyl-</ENT> <ENT>94-58-6</ENT> <ENT>U090</ENT> </ROW> <ROW> <ENT I="01">Diisopropylfluorophosphate (DFP)</ENT> <ENT>Phosphorofluoridic acid, bis(1-methylethyl) ester</ENT> <ENT>55-91-4</ENT> <ENT>P043</ENT> </ROW> <ROW> <ENT I="01">Dimethoate</ENT> <ENT>Phosphorodithioic acid, O,O-dimethyl S-[2-(methylamino)-2-oxoethyl] ester</ENT> <ENT>60-51-5</ENT> <ENT>P044</ENT> </ROW> <ROW> <ENT I="01">3,3′-Dimethoxybenzidine</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethoxy-</ENT> <ENT>119-90-4</ENT> <ENT>U091</ENT> </ROW> <ROW> <ENT I="01">p-Dimethylaminoazobenzene</ENT> <ENT>Benzenamine, N,N-dimethyl-4-(phenylazo)-</ENT> <ENT>60-11-7</ENT> <ENT>U093</ENT> </ROW> <ROW> <ENT I="01">2,4-Dimethylaniline (2,4-xylidine)</ENT> <ENT>Benzenamine, 2,4-dimethyl-</ENT> <ENT>95-68-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">7,12-Dimethylbenz[a]anthracene</ENT> <ENT>Benz[a]anthracene, 7,12-dimethyl-</ENT> <ENT>57-97-6</ENT> <ENT>U094</ENT> </ROW> <ROW> <ENT I="01">3,3′-Dimethylbenzidine</ENT> <ENT>[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethyl-</ENT> <ENT>119-93-7</ENT> <ENT>U095</ENT> </ROW> <ROW> <ENT I="01">Dimethylcarbamoyl chloride</ENT> <ENT>Carbamic chloride, dimethyl-</ENT> <ENT>79-44-7</ENT> <ENT>U097</ENT> </ROW> <ROW> <ENT I="01">1,1-Dimethylhydrazine</ENT> <ENT>Hydrazine, 1,1-dimethyl-</ENT> <ENT>57-14-7</ENT> <ENT>U098</ENT> </ROW> <ROW> <ENT I="01">1,2-Dimethylhydrazine</ENT> <ENT>Hydrazine, 1,2-dimethyl-</ENT> <ENT>540-73-8</ENT> <ENT>U099</ENT> </ROW> <ROW> <ENT I="01">alpha,alpha-Dimethylphenethylamine</ENT> <ENT>Benzeneethanamine, alpha,alpha-dimethyl-</ENT> <ENT>122-09-8</ENT> <ENT>P046</ENT> </ROW> <ROW> <ENT I="01">2,4-Dimethylphenol</ENT> <ENT>Phenol, 2,4-dimethyl-</ENT> <ENT>105-67-9</ENT> <ENT>U101</ENT> </ROW> <ROW> <ENT I="01">Dimethyl phthalate</ENT> <ENT>1,2-Benzenedicarboxylic acid, dimethyl ester</ENT> <ENT>131-11-3</ENT> <ENT>U102</ENT> </ROW> <ROW> <ENT I="01">Dimethyl sulfate</ENT> <ENT>Sulfuric acid, dimethyl ester</ENT> <ENT>77-78-1</ENT> <ENT>U103</ENT> </ROW> <ROW> <ENT I="01">Dimetilan</ENT> <ENT>Carbamic acid, dimethyl-, 1- [(dimethylamino) carbonyl]-5-methyl-1H-pyrazol-3-yl ester</ENT> <ENT>644-64-4</ENT> <ENT>P191</ENT> </ROW> <ROW> <ENT I="01">Dinitrobenzene, N.O.S. <SU>1</SU> </ENT> <ENT>Benzene, dinitro-</ENT> <ENT>25154-54-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">4,6-Dinitro-o-cresol</ENT> <ENT>Phenol, 2-methyl-4,6-dinitro-</ENT> <ENT>534-52-1</ENT> <ENT>P047</ENT> </ROW> <ROW> <ENT I="01">4,6-Dinitro-o-cresol salts</ENT> <ENT/> <ENT/> <ENT>P047</ENT> </ROW> <ROW> <PRTPAGE P="115"/> <ENT I="01">2,4-Dinitrophenol</ENT> <ENT>Phenol, 2,4-dinitro-</ENT> <ENT>51-28-5</ENT> <ENT>P048</ENT> </ROW> <ROW> <ENT I="01">2,4-Dinitrotoluene</ENT> <ENT>Benzene, 1-methyl-2,4-dinitro-</ENT> <ENT>121-14-2</ENT> <ENT>U105</ENT> </ROW> <ROW> <ENT I="01">2,6-Dinitrotoluene</ENT> <ENT>Benzene, 2-methyl-1,3-dinitro-</ENT> <ENT>606-20-2</ENT> <ENT>U106</ENT> </ROW> <ROW> <ENT I="01">Dinoseb</ENT> <ENT>Phenol, 2-(1-methylpropyl)-4,6-dinitro-</ENT> <ENT>88-85-7</ENT> <ENT>P020</ENT> </ROW> <ROW> <ENT I="01">Di-n-octyl phthalate</ENT> <ENT>1,2-Benzenedicarboxylic acid, dioctyl ester</ENT> <ENT>117-84-0</ENT> <ENT>U017</ENT> </ROW> <ROW> <ENT I="01">Diphenylamine</ENT> <ENT>Benzenamine, N-phenyl-</ENT> <ENT>122-39-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,2-Diphenylhydrazine</ENT> <ENT>Hydrazine, 1,2-diphenyl-</ENT> <ENT>122-66-7</ENT> <ENT>U109</ENT> </ROW> <ROW> <ENT I="01">Di-n-propylnitrosamine</ENT> <ENT>1-Propanamine, N-nitroso-N-propyl-</ENT> <ENT>621-64-7</ENT> <ENT>U111</ENT> </ROW> <ROW> <ENT I="01">Disulfiram</ENT> <ENT>Thioperoxydicarbonic diamide, tetraethyl</ENT> <ENT>97-77-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Disulfoton</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-[2-(ethylthio)ethyl] ester</ENT> <ENT>298-04-4</ENT> <ENT>P039</ENT> </ROW> <ROW> <ENT I="01">Dithiobiuret</ENT> <ENT>Thioimidodicarbonic diamide [(H<E T="52">2</E> N)C(S)]<E T="52">2</E> NH</ENT> <ENT>541-53-7</ENT> <ENT>P049</ENT> </ROW> <ROW> <ENT I="01">Endosulfan</ENT> <ENT>6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a- hexahydro-, 3-oxide</ENT> <ENT>115-29-7</ENT> <ENT>P050</ENT> </ROW> <ROW> <ENT I="01">Endothall</ENT> <ENT>7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid</ENT> <ENT>145-73-3</ENT> <ENT>P088</ENT> </ROW> <ROW> <ENT I="01">Endrin</ENT> <ENT>2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octa-hydro-, (1aalpha,2beta,2abeta,3alpha,6alpha, 6abeta,7beta,7aalpha)-</ENT> <ENT>72-20-8</ENT> <ENT>P051</ENT> </ROW> <ROW> <ENT I="01">Endrin metabolites</ENT> <ENT/> <ENT/> <ENT>P051</ENT> </ROW> <ROW> <ENT I="01">Epichlorohydrin</ENT> <ENT>Oxirane, (chloromethyl)-</ENT> <ENT>106-89-8</ENT> <ENT>U041</ENT> </ROW> <ROW> <ENT I="01">Epinephrine</ENT> <ENT>1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-, (R)-</ENT> <ENT>51-43-4</ENT> <ENT>P042</ENT> </ROW> <ROW> <ENT I="01">EPTC</ENT> <ENT>Carbamothioic acid, dipropyl-, S-ethyl ester</ENT> <ENT>759-94-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Ethyl carbamate (urethane)</ENT> <ENT>Carbamic acid, ethyl ester</ENT> <ENT>51-79-6</ENT> <ENT>U238</ENT> </ROW> <ROW> <ENT I="01">Ethyl cyanide</ENT> <ENT>Propanenitrile</ENT> <ENT>107-12-0</ENT> <ENT>P101</ENT> </ROW> <ROW> <ENT I="01">Ethyl Ziram</ENT> <ENT>Zinc, bis(diethylcarbamodithioato-S,S′)-</ENT> <ENT>14324-55-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Ethylenebisdithiocarbamic acid</ENT> <ENT>Carbamodithioic acid, 1,2-ethanediylbis-</ENT> <ENT>111-54-6</ENT> <ENT>U114</ENT> </ROW> <ROW> <ENT I="01">Ethylenebisdithiocarbamic acid, salts and esters</ENT> <ENT/> <ENT/> <ENT>U114</ENT> </ROW> <ROW> <ENT I="01">Ethylene dibromide</ENT> <ENT>Ethane, 1,2-dibromo-</ENT> <ENT>106-93-4</ENT> <ENT>U067</ENT> </ROW> <ROW> <ENT I="01">Ethylene dichloride</ENT> <ENT>Ethane, 1,2-dichloro-</ENT> <ENT>107-06-2</ENT> <ENT>U077</ENT> </ROW> <ROW> <ENT I="01">Ethylene glycol monoethyl ether</ENT> <ENT>Ethanol, 2-ethoxy-</ENT> <ENT>110-80-5</ENT> <ENT>U359</ENT> </ROW> <ROW> <ENT I="01">Ethyleneimine</ENT> <ENT>Aziridine</ENT> <ENT>151-56-4</ENT> <ENT>P054</ENT> </ROW> <ROW> <ENT I="01">Ethylene oxide</ENT> <ENT>Oxirane</ENT> <ENT>75-21-8</ENT> <ENT>U115</ENT> </ROW> <ROW> <ENT I="01">Ethylenethiourea</ENT> <ENT>2-Imidazolidinethione</ENT> <ENT>96-45-7</ENT> <ENT>U116</ENT> </ROW> <ROW> <ENT I="01">Ethylidene dichloride</ENT> <ENT>Ethane, 1,1-dichloro-</ENT> <ENT>75-34-3</ENT> <ENT>U076</ENT> </ROW> <ROW> <ENT I="01">Ethyl methacrylate</ENT> <ENT>2-Propenoic acid, 2-methyl-, ethyl ester</ENT> <ENT>97-63-2</ENT> <ENT>U118</ENT> </ROW> <ROW> <ENT I="01">Ethyl methanesulfonate</ENT> <ENT>Methanesulfonic acid, ethyl ester</ENT> <ENT>62-50-0</ENT> <ENT>U119</ENT> </ROW> <ROW> <ENT I="01">Famphur</ENT> <ENT>Phosphorothioic acid, O-[4-[(dimethylamino)sulfonyl]phenyl] O,O-dimethyl ester</ENT> <ENT>52-85-7</ENT> <ENT>P097</ENT> </ROW> <ROW> <ENT I="01">Ferbam</ENT> <ENT>Iron, tris(dimethylcarbamodithioato-S,S′)-,</ENT> <ENT>14484-64-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Fluoranthene</ENT> <ENT>Same</ENT> <ENT>206-44-0</ENT> <ENT>U120</ENT> </ROW> <ROW> <ENT I="01">Fluorine</ENT> <ENT>Same</ENT> <ENT>7782-41-4</ENT> <ENT>P056</ENT> </ROW> <ROW> <ENT I="01">Fluoroacetamide</ENT> <ENT>Acetamide, 2-fluoro-</ENT> <ENT>640-19-7</ENT> <ENT>P057</ENT> </ROW> <ROW> <ENT I="01">Fluoroacetic acid, sodium salt</ENT> <ENT>Acetic acid, fluoro-, sodium salt</ENT> <ENT>62-74-8</ENT> <ENT>P058</ENT> </ROW> <ROW> <ENT I="01">Formaldehyde</ENT> <ENT>Same</ENT> <ENT>50-00-0</ENT> <ENT>U122</ENT> </ROW> <ROW> <ENT I="01">Formetanate hydrochloride</ENT> <ENT>Methanimidamide, N,N-dimethyl-N′-[3-[[(methylamino) carbonyl]oxy]phenyl]-, monohydrochloride</ENT> <ENT>23422-53-9</ENT> <ENT>P198</ENT> </ROW> <ROW> <ENT I="01">Formic acid</ENT> <ENT>Same</ENT> <ENT>64-18-6</ENT> <ENT>U123</ENT> </ROW> <ROW> <ENT I="01">Formparanate</ENT> <ENT>Methanimidamide, N,N-dimethyl-N′-[2-methyl-4-[[(methylamino) carbonyl]oxy]phenyl]-</ENT> <ENT>17702-57-7</ENT> <ENT>P197</ENT> </ROW> <ROW> <ENT I="01">Glycidylaldehyde</ENT> <ENT>Oxiranecarboxyaldehyde</ENT> <ENT>765-34-4</ENT> <ENT>U126</ENT> </ROW> <ROW> <ENT I="01">Halomethanes, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Heptachlor</ENT> <ENT>4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-</ENT> <ENT>76-44-8</ENT> <ENT>P059</ENT> </ROW> <ROW> <ENT I="01">Heptachlor epoxide</ENT> <ENT>2,5-Methano-2H-indeno[1,2-b]oxirene, 2,3,4,5,6,7,7-heptachloro-1a,1b,5,5a,6,6a-hexa- hydro-, (1aalpha,1bbeta,2alpha,5alpha, 5abeta,6beta,6aalpha)-</ENT> <ENT>1024-57-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Heptachlor epoxide (alpha, beta, and gamma isomers)</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Heptachlorodibenzofurans</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Heptachlorodibenzo-p-dioxins</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Hexachlorobenzene</ENT> <ENT>Benzene, hexachloro-</ENT> <ENT>118-74-1</ENT> <ENT>U127</ENT> </ROW> <ROW> <ENT I="01">Hexachlorobutadiene</ENT> <ENT>1,3-Butadiene, 1,1,2,3,4,4-hexachloro-</ENT> <ENT>87-68-3</ENT> <ENT>U128</ENT> </ROW> <ROW> <PRTPAGE P="116"/> <ENT I="01">Hexachlorocyclopentadiene</ENT> <ENT>1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-</ENT> <ENT>77-47-4</ENT> <ENT>U130</ENT> </ROW> <ROW> <ENT I="01">Hexachlorodibenzo-p-dioxins</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Hexachlorodibenzofurans</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Hexachloroethane</ENT> <ENT>Ethane, hexachloro-</ENT> <ENT>67-72-1</ENT> <ENT>U131</ENT> </ROW> <ROW> <ENT I="01">Hexachlorophene</ENT> <ENT>Phenol, 2,2′-methylenebis[3,4,6-trichloro-</ENT> <ENT>70-30-4</ENT> <ENT>U132</ENT> </ROW> <ROW> <ENT I="01">Hexachloropropene</ENT> <ENT>1-Propene, 1,1,2,3,3,3-hexachloro-</ENT> <ENT>1888-71-7</ENT> <ENT>U243</ENT> </ROW> <ROW> <ENT I="01">Hexaethyl tetraphosphate</ENT> <ENT>Tetraphosphoric acid, hexaethyl ester</ENT> <ENT>757-58-4</ENT> <ENT>P062</ENT> </ROW> <ROW> <ENT I="01">Hydrazine</ENT> <ENT>Same</ENT> <ENT>302-01-2</ENT> <ENT>U133</ENT> </ROW> <ROW> <ENT I="01">Hydrogen cyanide</ENT> <ENT>Hydrocyanic acid</ENT> <ENT>74-90-8</ENT> <ENT>P063</ENT> </ROW> <ROW> <ENT I="01">Hydrogen fluoride</ENT> <ENT>Hydrofluoric acid</ENT> <ENT>7664-39-3</ENT> <ENT>U134</ENT> </ROW> <ROW> <ENT I="01">Hydrogen sulfide</ENT> <ENT>Hydrogen sulfide H<E T="52">2</E> S</ENT> <ENT>7783-06-4</ENT> <ENT>U135</ENT> </ROW> <ROW> <ENT I="01">Indeno[1,2,3-cd]pyrene</ENT> <ENT>Same</ENT> <ENT>193-39-5</ENT> <ENT>U137</ENT> </ROW> <ROW> <ENT I="01">3-Iodo-2-propynyl n-butylcarbamate</ENT> <ENT>Carbamic acid, butyl-, 3-iodo-2-propynyl ester</ENT> <ENT>55406-53-6</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Isobutyl alcohol</ENT> <ENT>1-Propanol, 2-methyl-</ENT> <ENT>78-83-1</ENT> <ENT>U140</ENT> </ROW> <ROW> <ENT I="01">Isodrin</ENT> <ENT>1,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexa-hydro-, (1alpha,-4alpha,-4abeta,-5beta, -8beta,-8abeta)-</ENT> <ENT>465-73-6</ENT> <ENT>P060</ENT> </ROW> <ROW> <ENT I="01">Isolan</ENT> <ENT>Carbamic acid, dimethyl-, 3-methyl-1-(1-methylethyl)-1H-pyrazol-5-yl ester</ENT> <ENT>119-38-0</ENT> <ENT>P192</ENT> </ROW> <ROW> <ENT I="01">Isosafrole</ENT> <ENT>1,3-Benzodioxole, 5-(1-propenyl)-</ENT> <ENT>120-58-1</ENT> <ENT>U141</ENT> </ROW> <ROW> <ENT I="01">Kepone</ENT> <ENT>1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1,1a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-</ENT> <ENT>143-50-0</ENT> <ENT>U142</ENT> </ROW> <ROW> <ENT I="01">Lasiocarpine</ENT> <ENT O="xl">2-Butenoic acid, 2-methyl-,7-[[2,3-dihydroxy-2-(1-methoxyethyl)-3-methyl-1-<LI O="xl">oxobutoxy]methyl]-2,3,5,7a-tetrahydro-1H-pyrrolizin-1-yl ester,</LI> <LI O="xl">[1S-[1alpha(Z),7(2S*,3R*),7aalpha]]-</LI> </ENT> <ENT>303-34-4</ENT> <ENT>U143</ENT> </ROW> <ROW> <ENT I="01">Lead</ENT> <ENT>Same</ENT> <ENT>7439-92-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Lead compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Lead acetate</ENT> <ENT>Acetic acid, lead(2+) salt</ENT> <ENT>301-04-2</ENT> <ENT>U144</ENT> </ROW> <ROW> <ENT I="01">Lead phosphate</ENT> <ENT>Phosphoric acid, lead(2+) salt (2:3)</ENT> <ENT>7446-27-7</ENT> <ENT>U145</ENT> </ROW> <ROW> <ENT I="01">Lead subacetate</ENT> <ENT>Lead, bis(acetato-O)tetrahydroxytri-</ENT> <ENT>1335-32-6</ENT> <ENT>U146</ENT> </ROW> <ROW> <ENT I="01">Lindane</ENT> <ENT>Cyclohexane, 1,2,3,4,5,6-hexachloro-, (1alpha,2alpha,3beta,4alpha, 5alpha,6beta)-</ENT> <ENT>58-89-9</ENT> <ENT>U129</ENT> </ROW> <ROW> <ENT I="01">Maleic anhydride</ENT> <ENT>2,5-Furandione</ENT> <ENT>108-31-6</ENT> <ENT>U147</ENT> </ROW> <ROW> <ENT I="01">Maleic hydrazide</ENT> <ENT>3,6-Pyridazinedione, 1,2-dihydro-</ENT> <ENT>123-33-1</ENT> <ENT>U148</ENT> </ROW> <ROW> <ENT I="01">Malononitrile</ENT> <ENT>Propanedinitrile</ENT> <ENT>109-77-3</ENT> <ENT>U149</ENT> </ROW> <ROW> <ENT I="01">Manganese dimethyldithiocarbamate</ENT> <ENT>Manganese, bis(dimethylcarbamodithioato-S,S′)-,</ENT> <ENT>15339-36-3</ENT> <ENT>P196</ENT> </ROW> <ROW> <ENT I="01">Melphalan</ENT> <ENT>L-Phenylalanine, 4-[bis(2-chloroethyl)aminol]-</ENT> <ENT>148-82-3</ENT> <ENT>U150</ENT> </ROW> <ROW> <ENT I="01">Mercury</ENT> <ENT>Same</ENT> <ENT>7439-97-6</ENT> <ENT>U151</ENT> </ROW> <ROW> <ENT I="01">Mercury compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Mercury fulminate</ENT> <ENT>Fulminic acid, mercury(2+) salt</ENT> <ENT>628-86-4</ENT> <ENT>P065</ENT> </ROW> <ROW> <ENT I="01">Metam Sodium</ENT> <ENT>Carbamodithioic acid, methyl-, monosodium salt</ENT> <ENT>137-42-8</ENT> </ROW> <ROW> <ENT I="01">Methacrylonitrile</ENT> <ENT>2-Propenenitrile, 2-methyl-</ENT> <ENT>126-98-7</ENT> <ENT>U152</ENT> </ROW> <ROW> <ENT I="01">Methapyrilene</ENT> <ENT>1,2-Ethanediamine, N,N-dimethyl-N′-2-pyridinyl-N′-(2-thienylmethyl)-</ENT> <ENT>91-80-5</ENT> <ENT>U155</ENT> </ROW> <ROW> <ENT I="01">Methiocarb</ENT> <ENT>Phenol, (3,5-dimethyl-4-(methylthio)-, methylcarbamate</ENT> <ENT>2032-65-7</ENT> <ENT>P199</ENT> </ROW> <ROW> <ENT I="01">Methomyl</ENT> <ENT>Ethanimidothioic acid, N-[[(methylamino)carbonyl]oxy]-, methyl ester</ENT> <ENT>16752-77-5</ENT> <ENT>P066</ENT> </ROW> <ROW> <ENT I="01">Methoxychlor</ENT> <ENT>Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4-methoxy-</ENT> <ENT>72-43-5</ENT> <ENT>U247</ENT> </ROW> <ROW> <ENT I="01">Methyl bromide</ENT> <ENT>Methane, bromo-</ENT> <ENT>74-83-9</ENT> <ENT>U029</ENT> </ROW> <ROW> <ENT I="01">Methyl chloride</ENT> <ENT>Methane, chloro-</ENT> <ENT>74-87-3</ENT> <ENT>U045</ENT> </ROW> <ROW> <ENT I="01">Methyl chlorocarbonate</ENT> <ENT>Carbonochloridic acid, methyl ester</ENT> <ENT>79-22-1</ENT> <ENT>U156</ENT> </ROW> <ROW> <ENT I="01">Methyl chloroform</ENT> <ENT>Ethane, 1,1,1-trichloro-</ENT> <ENT>71-55-6</ENT> <ENT>U226</ENT> </ROW> <ROW> <ENT I="01">3-Methylcholanthrene</ENT> <ENT>Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-</ENT> <ENT>56-49-5</ENT> <ENT>U157</ENT> </ROW> <ROW> <ENT I="01">4,4′-Methylenebis(2-chloroaniline)</ENT> <ENT>Benzenamine, 4,4′-methylenebis[2-chloro-</ENT> <ENT>101-14-4</ENT> <ENT>U158</ENT> </ROW> <ROW> <ENT I="01">Methylene bromide</ENT> <ENT>Methane, dibromo-</ENT> <ENT>74-95-3</ENT> <ENT>U068</ENT> </ROW> <ROW> <ENT I="01">Methylene chloride</ENT> <ENT>Methane, dichloro-</ENT> <ENT>75-09-2</ENT> <ENT>U080</ENT> </ROW> <ROW> <ENT I="01">Methyl ethyl ketone (MEK)</ENT> <ENT>2-Butanone</ENT> <ENT>78-93-3</ENT> <ENT>U159</ENT> </ROW> <ROW> <ENT I="01">Methyl ethyl ketone peroxide</ENT> <ENT>2-Butanone, peroxide</ENT> <ENT>1338-23-4</ENT> <ENT>U160</ENT> </ROW> <ROW> <ENT I="01">Methyl hydrazine</ENT> <ENT>Hydrazine, methyl-</ENT> <ENT>60-34-4</ENT> <ENT>P068</ENT> </ROW> <ROW> <ENT I="01">Methyl iodide</ENT> <ENT>Methane, iodo-</ENT> <ENT>74-88-4</ENT> <ENT>U138</ENT> </ROW> <ROW> <PRTPAGE P="117"/> <ENT I="01">Methyl isocyanate</ENT> <ENT>Methane, isocyanato-</ENT> <ENT>624-83-9</ENT> <ENT>P064</ENT> </ROW> <ROW> <ENT I="01">2-Methyllactonitrile</ENT> <ENT>Propanenitrile, 2-hydroxy-2-methyl-</ENT> <ENT>75-86-5</ENT> <ENT>P069</ENT> </ROW> <ROW> <ENT I="01">Methyl methacrylate</ENT> <ENT>2-Propenoic acid, 2-methyl-, methyl ester</ENT> <ENT>80-62-6</ENT> <ENT>U162</ENT> </ROW> <ROW> <ENT I="01">Methyl methanesulfonate</ENT> <ENT>Methanesulfonic acid, methyl ester</ENT> <ENT>66-27-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Methyl parathion</ENT> <ENT>Phosphorothioic acid, O,O-dimethyl O-(4-nitrophenyl) ester</ENT> <ENT>298-00-0</ENT> <ENT>P071</ENT> </ROW> <ROW> <ENT I="01">Methylthiouracil</ENT> <ENT>4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-</ENT> <ENT>56-04-2</ENT> <ENT>U164</ENT> </ROW> <ROW> <ENT I="01">Metolcarb</ENT> <ENT>Carbamic acid, methyl-, 3-methylphenyl ester</ENT> <ENT>1129-41-5</ENT> <ENT>P190</ENT> </ROW> <ROW> <ENT I="01">Mexacarbate</ENT> <ENT>Phenol, 4-(dimethylamino)-3,5-dimethyl-, methylcarbamate (ester)</ENT> <ENT>315-18-4</ENT> <ENT>P128</ENT> </ROW> <ROW> <ENT I="01">Mitomycin C</ENT> <ENT O="xl">Azirino[2′,3′:3,4]pyrrolo[1,2-a]indole-4,7-dione,<LI O="xl">6-amino-8-[[(aminocarbonyl)oxy]methyl]-1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5- methyl-, [1aS-(1aalpha,8beta,8aalpha,8balpha)]-.</LI> </ENT> <ENT>50-07-7</ENT> <ENT>U010</ENT> </ROW> <ROW> <ENT I="01">MNNG</ENT> <ENT>Guanidine, N-methyl-N′-nitro-N-nitroso-</ENT> <ENT>70-25-7</ENT> <ENT>U163</ENT> </ROW> <ROW> <ENT I="01">Molinate</ENT> <ENT>1H-Azepine-1-carbothioic acid, hexahydro-, S-ethyl ester</ENT> <ENT>2212-67-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Mustard gas</ENT> <ENT>Ethane, 1,1′-thiobis[2-chloro-</ENT> <ENT>505-60-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Naphthalene</ENT> <ENT>Same</ENT> <ENT>91-20-3</ENT> <ENT>U165</ENT> </ROW> <ROW> <ENT I="01">1,4-Naphthoquinone</ENT> <ENT>1,4-Naphthalenedione</ENT> <ENT>130-15-4</ENT> <ENT>U166</ENT> </ROW> <ROW> <ENT I="01">alpha-Naphthylamine</ENT> <ENT>1-Naphthalenamine</ENT> <ENT>134-32-7</ENT> <ENT>U167</ENT> </ROW> <ROW> <ENT I="01">beta-Naphthylamine</ENT> <ENT>2-Naphthalenamine</ENT> <ENT>91-59-8</ENT> <ENT>U168</ENT> </ROW> <ROW> <ENT I="01">alpha-Naphthylthiourea</ENT> <ENT>Thiourea, 1-naphthalenyl-</ENT> <ENT>86-88-4</ENT> <ENT>P072</ENT> </ROW> <ROW> <ENT I="01">Nickel</ENT> <ENT>Same</ENT> <ENT>7440-02-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Nickel compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Nickel carbonyl</ENT> <ENT>Nickel carbonyl Ni(CO)<E T="52">4</E>, (T-4)-</ENT> <ENT>13463-39-3</ENT> <ENT>P073</ENT> </ROW> <ROW> <ENT I="01">Nickel cyanide</ENT> <ENT>Nickel cyanide Ni(CN)<E T="52">2</E> </ENT> <ENT>557-19-7</ENT> <ENT>P074</ENT> </ROW> <ROW> <ENT I="01">Nicotine</ENT> <ENT>Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)-</ENT> <ENT>54-11-5</ENT> <ENT>P075</ENT> </ROW> <ROW> <ENT I="01">Nicotine salts</ENT> <ENT/> <ENT/> <ENT>P075</ENT> </ROW> <ROW> <ENT I="01">Nitric oxide</ENT> <ENT>Nitrogen oxide NO</ENT> <ENT>10102-43-9</ENT> <ENT>P076</ENT> </ROW> <ROW> <ENT I="01">p-Nitroaniline</ENT> <ENT>Benzenamine, 4-nitro-</ENT> <ENT>100-01-6</ENT> <ENT>P077</ENT> </ROW> <ROW> <ENT I="01">Nitrobenzene</ENT> <ENT>Benzene, nitro-</ENT> <ENT>98-95-3</ENT> <ENT>U169</ENT> </ROW> <ROW> <ENT I="01">Nitrogen dioxide</ENT> <ENT>Nitrogen oxide NO<E T="52">2</E> </ENT> <ENT>10102-44-0</ENT> <ENT>P078</ENT> </ROW> <ROW> <ENT I="01">Nitrogen mustard</ENT> <ENT>Ethanamine, 2-chloro-N-(2-chloroethyl)-N-methyl-</ENT> <ENT>51-75-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Nitrogen mustard, hydrochloride salt</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Nitrogen mustard N-oxide</ENT> <ENT>Ethanamine, 2-chloro-N-(2-chloroethyl)-N-methyl-, N-oxide</ENT> <ENT>126-85-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Nitrogen mustard, N-oxide, hydro- chloride salt</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Nitroglycerin</ENT> <ENT>1,2,3-Propanetriol, trinitrate</ENT> <ENT>55-63-0</ENT> <ENT>P081</ENT> </ROW> <ROW> <ENT I="01">p-Nitrophenol</ENT> <ENT>Phenol, 4-nitro-</ENT> <ENT>100-02-7</ENT> <ENT>U170</ENT> </ROW> <ROW> <ENT I="01">2-Nitropropane</ENT> <ENT>Propane, 2-nitro-</ENT> <ENT>79-46-9</ENT> <ENT>U171</ENT> </ROW> <ROW> <ENT I="01">Nitrosamines, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT>35576-91-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">N-Nitrosodi-n-butylamine</ENT> <ENT>1-Butanamine, N-butyl-N-nitroso-</ENT> <ENT>924-16-3</ENT> <ENT>U172</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosodiethanolamine</ENT> <ENT>Ethanol, 2,2′-(nitrosoimino)bis-</ENT> <ENT>1116-54-7</ENT> <ENT>U173</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosodiethylamine</ENT> <ENT>Ethanamine, N-ethyl-N-nitroso-</ENT> <ENT>55-18-5</ENT> <ENT>U174</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosodimethylamine</ENT> <ENT>Methanamine, N-methyl-N-nitroso-</ENT> <ENT>62-75-9</ENT> <ENT>P082</ENT> </ROW> <ROW> <ENT I="01">N-Nitroso-N-ethylurea</ENT> <ENT>Urea, N-ethyl-N-nitroso-</ENT> <ENT>759-73-9</ENT> <ENT>U176</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosomethylethylamine</ENT> <ENT>Ethanamine, N-methyl-N-nitroso-</ENT> <ENT>10595-95-6</ENT> <ENT/> </ROW> <ROW> <ENT I="01">N-Nitroso-N-methylurea</ENT> <ENT>Urea, N-methyl-N-nitroso-</ENT> <ENT>684-93-5</ENT> <ENT>U177</ENT> </ROW> <ROW> <ENT I="01">N-Nitroso-N-methylurethane</ENT> <ENT>Carbamic acid, methylnitroso-, ethyl ester</ENT> <ENT>615-53-2</ENT> <ENT>U178</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosomethylvinylamine</ENT> <ENT>Vinylamine, N-methyl-N-nitroso-</ENT> <ENT>4549-40-0</ENT> <ENT>P084</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosomorpholine</ENT> <ENT>Morpholine, 4-nitroso-</ENT> <ENT>59-89-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">N-Nitrosonornicotine</ENT> <ENT>Pyridine, 3-(1-nitroso-2-pyrrolidinyl)-, (S)-</ENT> <ENT>16543-55-8</ENT> <ENT/> </ROW> <ROW> <ENT I="01">N-Nitrosopiperidine</ENT> <ENT>Piperidine, 1-nitroso-</ENT> <ENT>100-75-4</ENT> <ENT>U179</ENT> </ROW> <ROW> <ENT I="01">N-Nitrosopyrrolidine</ENT> <ENT>Pyrrolidine, 1-nitroso-</ENT> <ENT>930-55-2</ENT> <ENT>U180</ENT> </ROW> <ROW> <ENT I="01">N-Nitrososarcosine</ENT> <ENT>Glycine, N-methyl-N-nitroso-</ENT> <ENT>13256-22-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">5-Nitro-o-toluidine</ENT> <ENT>Benzenamine, 2-methyl-5-nitro-</ENT> <ENT>99-55-8</ENT> <ENT>U181</ENT> </ROW> <ROW> <ENT I="01">Octachlorodibenzo-p-dioxin (OCDD)</ENT> <ENT>1,2,3,4,6,7,8,9-Octachlorodibenzo-p-dioxin</ENT> <ENT>3268-87-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Octachlorodibenzofuran (OCDF)</ENT> <ENT>1,2,3,4,6,7,8,9-Octachlorodibenofuran</ENT> <ENT>39001-02-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Octamethylpyrophosphoramide</ENT> <ENT>Diphosphoramide, octamethyl-</ENT> <ENT>152-16-9</ENT> <ENT>P085</ENT> </ROW> <ROW> <ENT I="01">Osmium tetroxide</ENT> <ENT>Osmium oxide OsO<E T="52">4</E>, (T-4)-</ENT> <ENT>20816-12-0</ENT> <ENT>P087</ENT> </ROW> <ROW> <ENT I="01">Oxamyl</ENT> <ENT>Ethanimidothioc acid, 2-(dimethylamino)-N-[[(methylamino)carbonyl]oxy]-2-oxo-, methyl ester</ENT> <ENT>23135-22-0</ENT> <ENT>P194</ENT> </ROW> <ROW> <ENT I="01">Paraldehyde</ENT> <ENT>1,3,5-Trioxane, 2,4,6-trimethyl-</ENT> <ENT>123-63-7</ENT> <ENT>U182</ENT> </ROW> <ROW> <ENT I="01">Parathion</ENT> <ENT>Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) ester</ENT> <ENT>56-38-2</ENT> <ENT>P089</ENT> </ROW> <ROW> <PRTPAGE P="118"/> <ENT I="01">Pebulate</ENT> <ENT>Carbamothioic acid, butylethyl-, S-propyl ester</ENT> <ENT>1114-71-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Pentachlorobenzene</ENT> <ENT>Benzene, pentachloro-</ENT> <ENT>608-93-5</ENT> <ENT>U183</ENT> </ROW> <ROW> <ENT I="01">Pentachlorodibenzo-p-dioxins</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Pentachlorodibenzofurans</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Pentachloroethane</ENT> <ENT>Ethane, pentachloro-</ENT> <ENT>76-01-7</ENT> <ENT>U184</ENT> </ROW> <ROW> <ENT I="01">Pentachloronitrobenzene (PCNB)</ENT> <ENT>Benzene, pentachloronitro-</ENT> <ENT>82-68-8</ENT> <ENT>U185</ENT> </ROW> <ROW> <ENT I="01">Pentachlorophenol</ENT> <ENT>Phenol, pentachloro-</ENT> <ENT>87-86-5</ENT> <ENT>See F027</ENT> </ROW> <ROW> <ENT I="01">Phenacetin</ENT> <ENT>Acetamide, N-(4-ethoxyphenyl)-</ENT> <ENT>62-44-2</ENT> <ENT>U187</ENT> </ROW> <ROW> <ENT I="01">Phenol</ENT> <ENT>Same</ENT> <ENT>108-95-2</ENT> <ENT>U188</ENT> </ROW> <ROW> <ENT I="01">1,2-Phenylenediamine</ENT> <ENT>1,2-Benzenediamine</ENT> <ENT>95-54-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,3-Phenylenediamine</ENT> <ENT>1,3-Benzenediamine</ENT> <ENT>108-45-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Phenylenediamine</ENT> <ENT>Benzenediamine</ENT> <ENT>25265-76-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Phenylmercury acetate</ENT> <ENT>Mercury, (acetato-O)phenyl-</ENT> <ENT>62-38-4</ENT> <ENT>P092</ENT> </ROW> <ROW> <ENT I="01">Phenylthiourea</ENT> <ENT>Thiourea, phenyl-</ENT> <ENT>103-85-5</ENT> <ENT>P093</ENT> </ROW> <ROW> <ENT I="01">Phosgene</ENT> <ENT>Carbonic dichloride</ENT> <ENT>75-44-5</ENT> <ENT>P095</ENT> </ROW> <ROW> <ENT I="01">Phosphine</ENT> <ENT>Same</ENT> <ENT>7803-51-2</ENT> <ENT>P096</ENT> </ROW> <ROW> <ENT I="01">Phorate</ENT> <ENT>Phosphorodithioic acid, O,O-diethyl S-[(ethylthio)methyl] ester</ENT> <ENT>298-02-2</ENT> <ENT>P094</ENT> </ROW> <ROW> <ENT I="01">Phthalic acid esters, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Phthalic anhydride</ENT> <ENT>1,3-Isobenzofurandione</ENT> <ENT>85-44-9</ENT> <ENT>U190</ENT> </ROW> <ROW> <ENT I="01">Physostigmine</ENT> <ENT>Pyrrolo[2,3-b]indol-5-01, 1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethyl-, methylcarbamate (ester), (3aS-cis)-</ENT> <ENT>57-47-6</ENT> <ENT>P204</ENT> </ROW> <ROW> <ENT I="01">Physostigmine salicylate</ENT> <ENT>Benzoic acid, 2-hydroxy-, compd. with (3aS-cis) -1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo [2,3-b]indol-5-yl methylcarbamate ester (1:1)</ENT> <ENT>57-64-7</ENT> <ENT>P188</ENT> </ROW> <ROW> <ENT I="01">2-Picoline</ENT> <ENT>Pyridine, 2-methyl-</ENT> <ENT>109-06-8</ENT> <ENT>U191</ENT> </ROW> <ROW> <ENT I="01">Polychlorinated biphenyls, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Potassium cyanide</ENT> <ENT>Potassium cyanide K(CN)</ENT> <ENT>151-50-8</ENT> <ENT>P098</ENT> </ROW> <ROW> <ENT I="01">Potassium dimethyldithiocarbamate</ENT> <ENT>Carbamodithioic acid, dimethyl, potassium salt</ENT> <ENT>128-03-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Potassium n-hydroxymethyl-n-methyl-dithiocarbamate</ENT> <ENT>Carbamodithioic acid, (hydroxymethyl)methyl-, monopotassium salt</ENT> <ENT>51026-28-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Potassium n-methyldithiocarbamate</ENT> <ENT>Carbamodithioic acid, methyl-monopotassium salt</ENT> <ENT>137-41-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Potassium pentachlorophenate</ENT> <ENT>Pentachlorophenol, potassium salt</ENT> <ENT>7778736</ENT> <ENT>None</ENT> </ROW> <ROW> <ENT I="01">Potassium silver cyanide</ENT> <ENT>Argentate(1-), bis(cyano-C)-, potassium</ENT> <ENT>506-61-6</ENT> <ENT>P099</ENT> </ROW> <ROW> <ENT I="01">Promecarb</ENT> <ENT>Phenol, 3-methyl-5-(1-methylethyl)-, methyl carbamate</ENT> <ENT>2631-37-0</ENT> <ENT>P201</ENT> </ROW> <ROW> <ENT I="01">Pronamide</ENT> <ENT>Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)-</ENT> <ENT>23950-58-5</ENT> <ENT>U192</ENT> </ROW> <ROW> <ENT I="01">1,3-Propane sultone</ENT> <ENT>1,2-Oxathiolane, 2,2-dioxide</ENT> <ENT>1120-71-4</ENT> <ENT>U193</ENT> </ROW> <ROW> <ENT I="01">n-Propylamine</ENT> <ENT>1-Propanamine</ENT> <ENT>107-10-8</ENT> <ENT>U194</ENT> </ROW> <ROW> <ENT I="01">Propargyl alcohol</ENT> <ENT>2-Propyn-1-ol</ENT> <ENT>107-19-7</ENT> <ENT>P102</ENT> </ROW> <ROW> <ENT I="01">Propham</ENT> <ENT>Carbamic acid, phenyl-, 1-methylethyl ester</ENT> <ENT>122-42-9</ENT> <ENT>U373</ENT> </ROW> <ROW> <ENT I="01">Propoxur</ENT> <ENT>Phenol, 2-(1-methylethoxy)-, methylcarbamate</ENT> <ENT>114-26-1</ENT> <ENT>U411</ENT> </ROW> <ROW> <ENT I="01">Propylene dichloride</ENT> <ENT>Propane, 1,2-dichloro-</ENT> <ENT>78-87-5</ENT> <ENT>U083</ENT> </ROW> <ROW> <ENT I="01">1,2-Propylenimine</ENT> <ENT>Aziridine, 2-methyl-</ENT> <ENT>75-55-8</ENT> <ENT>P067</ENT> </ROW> <ROW> <ENT I="01">Propylthiouracil</ENT> <ENT>4(1H)-Pyrimidinone, 2,3-dihydro-6-propyl-2-thioxo-</ENT> <ENT>51-52-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Prosulfocarb</ENT> <ENT>Carbamothioic acid, dipropyl-, S-(phenylmethyl) ester</ENT> <ENT>52888-80-9</ENT> <ENT>U387</ENT> </ROW> <ROW> <ENT I="01">Pyridine</ENT> <ENT>Same</ENT> <ENT>110-86-1</ENT> <ENT>U196</ENT> </ROW> <ROW> <ENT I="01">Reserpine</ENT> <ENT>Yohimban-16-carboxylic acid, 11,17-dimethoxy-18-[(3,4,5-trimethoxybenzoyl)oxy]-smethyl ester, (3beta,16beta,17alpha,18beta,20alpha)-</ENT> <ENT>50-55-5</ENT> <ENT>U200</ENT> </ROW> <ROW> <ENT I="01">Resorcinol</ENT> <ENT>1,3-Benzenediol</ENT> <ENT>108-46-3</ENT> <ENT>U201</ENT> </ROW> <ROW> <ENT I="01">Saccharin</ENT> <ENT>1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide</ENT> <ENT>81-07-2</ENT> <ENT>U202</ENT> </ROW> <ROW> <ENT I="01">Saccharin salts</ENT> <ENT/> <ENT/> <ENT>U202</ENT> </ROW> <ROW> <ENT I="01">Safrole</ENT> <ENT>1,3-Benzodioxole, 5-(2-propenyl)-</ENT> <ENT>94-59-7</ENT> <ENT>U203</ENT> </ROW> <ROW> <ENT I="01">Selenium</ENT> <ENT>Same</ENT> <ENT>7782-49-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Selenium compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Selenium dioxide</ENT> <ENT>Selenious acid</ENT> <ENT>7783-00-8</ENT> <ENT>U204</ENT> </ROW> <ROW> <ENT I="01">Selenium sulfide</ENT> <ENT>Selenium sulfide SeS<E T="52">2</E> </ENT> <ENT>7488-56-4</ENT> <ENT>U205</ENT> </ROW> <ROW> <ENT I="01">Selenium, tetrakis(dimethyl-dithiocarbamate)</ENT> <ENT>Carbamodithioic acid, dimethyl-, tetraanhydrosulfide with orthothioselenious acid</ENT> <ENT>144-34-3</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Selenourea</ENT> <ENT>Same</ENT> <ENT>630-10-4</ENT> <ENT>P103</ENT> </ROW> <ROW> <PRTPAGE P="119"/> <ENT I="01">Silver</ENT> <ENT>Same</ENT> <ENT>7440-22-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Silver compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Silver cyanide</ENT> <ENT>Silver cyanide Ag(CN)</ENT> <ENT>506-64-9</ENT> <ENT>P104</ENT> </ROW> <ROW> <ENT I="01">Silvex (2,4,5-TP)</ENT> <ENT>Propanoic acid, 2-(2,4,5-trichlorophenoxy)-</ENT> <ENT>93-72-1</ENT> <ENT>See F027</ENT> </ROW> <ROW> <ENT I="01">Sodium cyanide</ENT> <ENT>Sodium cyanide Na(CN)</ENT> <ENT>143-33-9</ENT> <ENT>P106</ENT> </ROW> <ROW> <ENT I="01">Sodium dibutyldithiocarbamate</ENT> <ENT>Carbamodithioic acid, dibutyl, sodium salt</ENT> <ENT>136-30-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Sodium diethyldithiocarbamate</ENT> <ENT>Carbamodithioic acid, diethyl-, sodium salt</ENT> <ENT>148-18-5</ENT> </ROW> <ROW> <ENT I="01">Sodium dimethyldithiocarbamate</ENT> <ENT>Carbamodithioic acid, dimethyl-, sodium salt</ENT> <ENT>128-04-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Sodium pentachlorophenate</ENT> <ENT>Pentachlorophenol, sodium salt</ENT> <ENT>131522</ENT> <ENT>None</ENT> </ROW> <ROW> <ENT I="01">Streptozotocin</ENT> <ENT>D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)carbonyl]amino]-</ENT> <ENT>18883-66-4</ENT> <ENT>U206</ENT> </ROW> <ROW> <ENT I="01">Strychnine</ENT> <ENT>Strychnidin-10-one</ENT> <ENT>57-24-9</ENT> <ENT>P108</ENT> </ROW> <ROW> <ENT I="01">Strychnine salts</ENT> <ENT/> <ENT/> <ENT>P108</ENT> </ROW> <ROW> <ENT I="01">Sulfallate</ENT> <ENT>Carbamodithioic acid, diethyl-, 2-chloro-2-propenyl ester</ENT> <ENT>95-06-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">TCDD</ENT> <ENT>Dibenzo[b,e][1,4]dioxin, 2,3,7,8-tetrachloro-</ENT> <ENT>1746-01-6</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Tetrabutylthiuram disulfide</ENT> <ENT>Thioperoxydicarbonic diamide, tetrabutyl</ENT> <ENT>1634-02-2</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,2,4,5-Tetrachlorobenzene</ENT> <ENT>Benzene, 1,2,4,5-tetrachloro-</ENT> <ENT>95-94-3</ENT> <ENT>U207</ENT> </ROW> <ROW> <ENT I="01">Tetrachlorodibenzo-p-dioxins</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Tetrachlorodibenzofurans</ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Tetrachloroethane, N.O.S. <SU>1</SU> </ENT> <ENT>Ethane, tetrachloro-, N.O.S.</ENT> <ENT>25322-20-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,1,1,2-Tetrachloroethane</ENT> <ENT>Ethane, 1,1,1,2-tetrachloro-</ENT> <ENT>630-20-6</ENT> <ENT>U208</ENT> </ROW> <ROW> <ENT I="01">1,1,2,2-Tetrachloroethane</ENT> <ENT>Ethane, 1,1,2,2-tetrachloro-</ENT> <ENT>79-34-5</ENT> <ENT>U209</ENT> </ROW> <ROW> <ENT I="01">Tetrachloroethylene</ENT> <ENT>Ethene, tetrachloro-</ENT> <ENT>127-18-4</ENT> <ENT>U210</ENT> </ROW> <ROW> <ENT I="01">2,3,4,6-Tetrachlorophenol</ENT> <ENT>Phenol, 2,3,4,6-tetrachloro-</ENT> <ENT>58-90-2</ENT> <ENT>See F027</ENT> </ROW> <ROW> <ENT I="01">2,3,4,6-tetrachlorophenol, potassium salt</ENT> <ENT>same</ENT> <ENT>53535276</ENT> <ENT>None</ENT> </ROW> <ROW> <ENT I="01">2,3,4,6-tetrachlorophenol, sodium salt</ENT> <ENT>same</ENT> <ENT>25567559</ENT> <ENT>None</ENT> </ROW> <ROW> <ENT I="01">Tetraethyldithiopyrophosphate</ENT> <ENT>Thiodiphosphoric acid, tetraethyl ester</ENT> <ENT>3689-24-5</ENT> <ENT>P109</ENT> </ROW> <ROW> <ENT I="01">Tetraethyl lead</ENT> <ENT>Plumbane, tetraethyl-</ENT> <ENT>78-00-2</ENT> <ENT>P110</ENT> </ROW> <ROW> <ENT I="01">Tetraethyl pyrophosphate</ENT> <ENT>Diphosphoric acid, tetraethyl ester</ENT> <ENT>107-49-3</ENT> <ENT>P111</ENT> </ROW> <ROW> <ENT I="01">Tetramethylthiuram monosulfide</ENT> <ENT>Bis(dimethylthiocarbamoyl) sulfide</ENT> <ENT>97-74-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Tetranitromethane</ENT> <ENT>Methane, tetranitro-</ENT> <ENT>509-14-8</ENT> <ENT>P112</ENT> </ROW> <ROW> <ENT I="01">Thallium</ENT> <ENT>Same</ENT> <ENT>7440-28-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Thallium compounds, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">Thallic oxide</ENT> <ENT>Thallium oxide Tl<E T="52">2</E> O<E T="52">3</E> </ENT> <ENT>1314-32-5</ENT> <ENT>P113</ENT> </ROW> <ROW> <ENT I="01">Thallium(I) acetate</ENT> <ENT>Acetic acid, thallium(1+) salt</ENT> <ENT>563-68-8</ENT> <ENT>U214</ENT> </ROW> <ROW> <ENT I="01">Thallium(I) carbonate</ENT> <ENT>Carbonic acid, dithallium(1+) salt</ENT> <ENT>6533-73-9</ENT> <ENT>U215</ENT> </ROW> <ROW> <ENT I="01">Thallium(I) chloride</ENT> <ENT>Thallium chloride TlCl</ENT> <ENT>7791-12-0</ENT> <ENT>U216</ENT> </ROW> <ROW> <ENT I="01">Thallium(I) nitrate</ENT> <ENT>Nitric acid, thallium(1+) salt</ENT> <ENT>10102-45-1</ENT> <ENT>U217</ENT> </ROW> <ROW> <ENT I="01">Thallium selenite</ENT> <ENT>Selenious acid, dithallium(1+) salt</ENT> <ENT>12039-52-0</ENT> <ENT>P114</ENT> </ROW> <ROW> <ENT I="01">Thallium(I) sulfate</ENT> <ENT>Sulfuric acid, dithallium(1+) salt</ENT> <ENT>7446-18-6</ENT> <ENT>P115</ENT> </ROW> <ROW> <ENT I="01">Thioacetamide</ENT> <ENT>Ethanethioamide</ENT> <ENT>62-55-5</ENT> <ENT>U218</ENT> </ROW> <ROW> <ENT I="01">Thiodicarb</ENT> <ENT>Ethanimidothioic acid, N,N′-[thiobis [(methylimino) carbonyloxy]] bis-, dimethyl ester</ENT> <ENT>59669-26-0</ENT> <ENT>U410</ENT> </ROW> <ROW> <ENT I="01">Thiofanox</ENT> <ENT>2-Butanone, 3,3-dimethyl-1-(methylthio)-, 0-[(methylamino)carbonyl] oxime</ENT> <ENT>39196-18-4</ENT> <ENT>P045</ENT> </ROW> <ROW> <ENT I="01">Thiomethanol</ENT> <ENT>Methanethiol</ENT> <ENT>74-93-1</ENT> <ENT>U153</ENT> </ROW> <ROW> <ENT I="01">Thiophanate-methyl</ENT> <ENT>Carbamic acid, [1,2-phyenylenebis (iminocarbonothioyl)] bis-, dimethyl ester</ENT> <ENT>23564-05-8</ENT> <ENT>U409</ENT> </ROW> <ROW> <ENT I="01">Thiophenol</ENT> <ENT>Benzenethiol</ENT> <ENT>108-98-5</ENT> <ENT>P014</ENT> </ROW> <ROW> <ENT I="01">Thiosemicarbazide</ENT> <ENT>Hydrazinecarbothioamide</ENT> <ENT>79-19-6</ENT> <ENT>P116</ENT> </ROW> <ROW> <ENT I="01">Thiourea</ENT> <ENT>Same</ENT> <ENT>62-56-6</ENT> <ENT>U219</ENT> </ROW> <ROW> <ENT I="01">Thiram</ENT> <ENT>Thioperoxydicarbonic diamide [(H<E T="52">2</E> N)C(S)]<E T="52">2</E> S<E T="52">2</E>, tetramethyl-</ENT> <ENT>137-26-8</ENT> <ENT>U244</ENT> </ROW> <ROW> <ENT I="01">Tirpate</ENT> <ENT>1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-, O-[(methylamino) carbonyl] oxime</ENT> <ENT>26419-73-8</ENT> <ENT>P185</ENT> </ROW> <ROW> <ENT I="01">Toluene</ENT> <ENT>Benzene, methyl-</ENT> <ENT>108-88-3</ENT> <ENT>U220</ENT> </ROW> <ROW> <ENT I="01">Toluenediamine</ENT> <ENT>Benzenediamine, ar-methyl-</ENT> <ENT>25376-45-8</ENT> <ENT>U221</ENT> </ROW> <ROW> <ENT I="01">Toluene-2,4-diamine</ENT> <ENT>1,3-Benzenediamine, 4-methyl-</ENT> <ENT>95-80-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Toluene-2,6-diamine</ENT> <ENT>1,3-Benzenediamine, 2-methyl-</ENT> <ENT>823-40-5</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Toluene-3,4-diamine</ENT> <ENT>1,2-Benzenediamine, 4-methyl-</ENT> <ENT>496-72-0</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Toluene diisocyanate</ENT> <ENT>Benzene, 1,3-diisocyanatomethyl-</ENT> <ENT>26471-62-5</ENT> <ENT>U223</ENT> </ROW> <ROW> <ENT I="01">o-Toluidine</ENT> <ENT>Benzenamine, 2-methyl-</ENT> <ENT>95-53-4</ENT> <ENT>U328</ENT> </ROW> <ROW> <ENT I="01">o-Toluidine hydrochloride</ENT> <ENT>Benzenamine, 2-methyl-, hydrochloride</ENT> <ENT>636-21-5</ENT> <ENT>U222</ENT> </ROW> <ROW> <ENT I="01">p-Toluidine</ENT> <ENT>Benzenamine, 4-methyl-</ENT> <ENT>106-49-0</ENT> <ENT>U353</ENT> </ROW> <ROW> <ENT I="01">Toxaphene</ENT> <ENT>Same</ENT> <ENT>8001-35-2</ENT> <ENT>P123</ENT> </ROW> <ROW> <ENT I="01">Triallate</ENT> <ENT>Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3-trichloro-2-propenyl) ester</ENT> <ENT>2303-17-5</ENT> <ENT>U389</ENT> </ROW> <ROW> <ENT I="01">1,2,4-Trichlorobenzene</ENT> <ENT>Benzene, 1,2,4-trichloro-</ENT> <ENT>120-82-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,1,2-Trichloroethane</ENT> <ENT>Ethane, 1,1,2-trichloro-</ENT> <ENT>79-00-5</ENT> <ENT>U227</ENT> </ROW> <ROW> <ENT I="01">Trichloroethylene</ENT> <ENT>Ethene, trichloro-</ENT> <ENT>79-01-6</ENT> <ENT>U228</ENT> </ROW> <ROW> <ENT I="01">Trichloromethanethiol</ENT> <ENT>Methanethiol, trichloro-</ENT> <ENT>75-70-7</ENT> <ENT>P118</ENT> </ROW> <ROW> <PRTPAGE P="120"/> <ENT I="01">Trichloromonofluoromethane</ENT> <ENT>Methane, trichlorofluoro-</ENT> <ENT>75-69-4</ENT> <ENT>U121</ENT> </ROW> <ROW> <ENT I="01">2,4,5-Trichlorophenol</ENT> <ENT>Phenol, 2,4,5-trichloro-</ENT> <ENT>95-95-4</ENT> <ENT>See F027</ENT> </ROW> <ROW> <ENT I="01">2,4,6-Trichlorophenol</ENT> <ENT>Phenol, 2,4,6-trichloro-</ENT> <ENT>88-06-2</ENT> <ENT>See F027</ENT> </ROW> <ROW> <ENT I="01">2,4,5-T</ENT> <ENT>Acetic acid, (2,4,5-trichlorophenoxy)-</ENT> <ENT>93-76-5</ENT> <ENT>See F027</ENT> </ROW> <ROW> <ENT I="01">Trichloropropane, N.O.S. <SU>1</SU> </ENT> <ENT/> <ENT>25735-29-9</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,2,3-Trichloropropane</ENT> <ENT>Propane, 1,2,3-trichloro-</ENT> <ENT>96-18-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Triethylamine</ENT> <ENT>Ethanamine, N,N-diethyl-</ENT> <ENT>121-44-8</ENT> <ENT>U404</ENT> </ROW> <ROW> <ENT I="01">O,O,O-Triethyl phosphorothioate</ENT> <ENT>Phosphorothioic acid, O,O,O-triethyl ester</ENT> <ENT>126-68-1</ENT> <ENT/> </ROW> <ROW> <ENT I="01">1,3,5-Trinitrobenzene</ENT> <ENT>Benzene, 1,3,5-trinitro-</ENT> <ENT>99-35-4</ENT> <ENT>U234</ENT> </ROW> <ROW> <ENT I="01">Tris(1-aziridinyl)phosphine sulfide</ENT> <ENT>Aziridine, 1,1′,1′′-phosphinothioylidynetris-</ENT> <ENT>52-24-4</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Tris(2,3-dibromopropyl) phosphate</ENT> <ENT>1-Propanol, 2,3-dibromo-, phosphate (3:1)</ENT> <ENT>126-72-7</ENT> <ENT>U235</ENT> </ROW> <ROW> <ENT I="01">Trypan blue</ENT> <ENT O="xl">2,7-Naphthalenedisulfonic acid, 3,3′-[(3,3′-dimethyl[1,1′-biphenyl]-4,4′-diyl)bis(azo)]-<LI O="xl">bis[5-amino-4-hydroxy-, tetrasodium salt.</LI> </ENT> <ENT>72-57-1</ENT> <ENT>U236</ENT> </ROW> <ROW> <ENT I="01">Uracil mustard</ENT> <ENT>2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]-</ENT> <ENT>66-75-1</ENT> <ENT>U237</ENT> </ROW> <ROW> <ENT I="01">Vanadium pentoxide</ENT> <ENT>Vanadium oxide V<E T="52">2</E> O<E T="52">5</E> </ENT> <ENT>1314-62-1</ENT> <ENT>P120</ENT> </ROW> <ROW> <ENT I="01">Vernolate</ENT> <ENT>Carbamothioic acid, dipropyl-,S-propyl ester</ENT> <ENT>1929-77-7</ENT> <ENT/> </ROW> <ROW> <ENT I="01">Vinyl chloride</ENT> <ENT>Ethene, chloro-</ENT> <ENT>75-01-4</ENT> <ENT>U043</ENT> </ROW> <ROW> <ENT I="01">Warfarin</ENT> <ENT>2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, when present at concentrations less than 0.3%</ENT> <ENT>81-81-2</ENT> <ENT>U248</ENT> </ROW> <ROW> <ENT I="01">Warfarin</ENT> <ENT>2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, when present at concentrations greater than 0.3%</ENT> <ENT>81-81-2</ENT> <ENT>P001</ENT> </ROW> <ROW> <ENT I="01">Warfarin salts, when present at concentrations less than 0.3%</ENT> <ENT/> <ENT/> <ENT>U248</ENT> </ROW> <ROW> <ENT I="01">Warfarin salts, when present at concentrations greater than 0.3%</ENT> <ENT/> <ENT/> <ENT>P001</ENT> </ROW> <ROW> <ENT I="01">Zinc cyanide</ENT> <ENT>Zinc cyanide Zn(CN)<E T="52">2</E> </ENT> <ENT>557-21-1</ENT> <ENT>P121</ENT> </ROW> <ROW> <ENT I="01">Zinc phosphide</ENT> <ENT>Zinc phosphide Zn<E T="52">3</E> P<E T="52">2</E>, when present at concentrations greater than 10%</ENT> <ENT>1314-84-7</ENT> <ENT>P122</ENT> </ROW> <ROW> <ENT I="01">Zinc phosphide</ENT> <ENT>Zinc phosphide Zn<E T="52">3</E> P<E T="52">2</E>, when present at concentrations of 10% or less</ENT> <ENT>1314-84-7</ENT> <ENT>U249</ENT> </ROW> <ROW> <ENT I="01">Ziram</ENT> <ENT>ZInc, bis(dimethylcarbamodithioato-S,S′)-, (T-4)-</ENT> <ENT>137-30-4</ENT> <ENT>P205</ENT> </ROW> <TNOTE> <SU>1</SU> The abbreviation N.O.S. (not otherwise specified) signifies those members of the general class not specifically listed by name in this appendix.</TNOTE> </GPOTABLE> <CITA>[53 FR 13388, Apr. 22, 1988, as amended at 53 FR 43881, Oct. 31, 1988; 54 FR 50978, Dec. 11, 1989; 55 FR 50483, Dec. 6, 1990; 56 FR 7568, Feb. 25, 1991; 59 FR 468, Jan. 4, 1994; 59 FR 31551, June 20, 1994; 60 FR 7853, Feb. 9, 1995; 60 FR 19165, Apr. 17, 1995; 62 FR 32977, June 17, 1997; 63 FR 24625, May 4, 1998; 65 FR 14475, Mar. 17, 2000; 65 FR 67127, Nov. 8, 2000; 70 FR 9177, Feb. 24, 2005; 71 FR 40271, July 14, 2006]</CITA> </APPENDIX> <APPENDIX> <PRTPAGE P="121"/> <EAR>Pt. 261, App. IX</EAR> <HD SOURCE="HED">Appendix IX to Part 261—Wastes Excluded Under §§ 260.20 and 260.22</HD> <GPOTABLE CDEF="xs40,xs40,r150" COLS="3" OPTS="L2"> <TTITLE>Table 1—Wastes Excluded From Non-Specific Sources</TTITLE> <BOXHD> <CHED H="1">Facility</CHED> <CHED H="1">Address</CHED> <CHED H="1">Waste description</CHED> </BOXHD> <ROW> <ENT I="01">Aluminum Company of America</ENT> <ENT>750 Norcold Ave., Sidney, Ohio 45365</ENT> <ENT>Wastewater treatment plant (WWTP) sludges generated from the chemical conversion coating of aluminum (EPA Hazardous Waste No. F019) and WWTP sludges generated from electroplating operations (EPA Hazardous Waste No. F006) and stored in an on-site landfill. This is an exclusion for approximately 16,772 cubic yards of landfilled WWTP filter cake. This exclusion applies only if the waste filter cake remains in place or, if excavated, is disposed of in a Subtitle D landfill which is permitted, licensed, or registered by a state to manage industrial solid waste. This exclusion was published on April 6, 1999.<LI>1. The constituent concentrations measured in the TCLP extract may not exceed the following levels (mg/L): Arsenic—5; Barium—100; Chromium—5; Cobalt—210; Copper—130; Nickel—70; Vanadium—30; Zinc—1000; Fluoride—400; Acetone—400; Methylene Chloride—0.5; Bis(2-ethylhexyl)phthalate—0.6.</LI> <LI>2. (a) If, anytime after disposal of the delisted waste, Alcoa possesses or is otherwise made aware of any environmental data (including but not limited to leachate data or groundwater monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified in Condition (1) is at a level in the leachate higher than the delisting level established in Condition (1), or is at a level in the ground water or soil higher than the health based level, then Alcoa must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</LI> <LI>(b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending or revoking this exclusion, or other appropriate response necessary to protect human health and the environment.</LI> <LI>(c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify the facility in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing the facility with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. The facility shall have 10 days from the date of the Regional Administrator's notice to present such information.</LI> <LI>(d) Following the receipt of information from the facility described in paragraph (c) or (if no information is presented under paragraph (c) the initial receipt of information described in paragraph (a), the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</LI> </ENT> </ROW> <ROW> <ENT I="22"/> </ROW> <ROW> <ENT I="01">Alumnitec, Inc. (formerly Profile Extrusion Co., formerly United Technologies Automotive, Inc.)</ENT> <ENT>Jeffersonville, IN</ENT> <ENT>Dewatered wastewater treatment sludge (EPA Hazardous Waste No. F019) generated from the chemical conversion of aluminum after April 29, 1986.</ENT> </ROW> <ROW> <ENT I="01">American Metals Corporation</ENT> <ENT>Westlake, Ohio</ENT> <ENT>Wastewater treatment plant (WWTP) sludges from the chemical conversion coating (phosphating) of aluminum (EPA Hazardous Waste No. F019) and other solid wastes previously disposed in an on-site landfill. This is a one-time exclusion for 12,400 cubic yards of landfilled WWTP sludge. This exclusion is effective on January 15, 2002.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>1. <E T="03">Delisting Levels:</E> </ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) The constituent concentrations measured in the TCLP extract may not exceed the following levels (mg/L): antimony—1.52; arsenic—0.691; barium—100; beryllium—3.07; cadmium—1; chromium—5; cobalt—166; copper—67,300; lead—5; mercury—0.2; nickel—209; selenium—1; silver—5; thallium—0.65; tin—1,660; vanadium—156; and zinc—2,070.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) The total constituent concentrations in any sample may not exceed the following levels (mg/kg): arsenic—9,280; mercury—94; and polychlorinated biphenyls—0.265.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) Concentrations of dioxin and furan congeners cannot exceed values which would result in a cancer risk greater than or equal to 10<E T="51">−6</E> as predicted by the model.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>2. <E T="03">Verification Sampling</E>—USG shall collect six additional vertically composited samples of sludge from locations that compliment historical data and shall analyze the samples by TCLP for metals including antimony, arsenic, barium, beryllium, cadmium, chromium, lead, mercury, nickel, selenium, silver, thallium, tin, vanadium, and zinc. If the samples exceed the levels in Condition (1)(a), USG must notify EPA. The corresponding sludge and all sludge yet to be disposed remains hazardous until USG has demonstrated by additional sampling that all constituents of concern are below the levels set forth in condition 1.</ENT> </ROW> <ROW> <PRTPAGE P="122"/> <ENT I="22"/> <ENT O="xl"/> <ENT>3. <E T="03">Reopener Language</E>—(a) If, anytime after disposal of the delisted waste, USG possesses or is otherwise made aware of any data (including but not limited to leachate data or groundwater monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified in Condition (1) is at a level higher than the delisting level established in Condition (1), or is at a level in the groundwater exceeding maximum allowable point of exposure concentration referenced by the model, then USG must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify USG in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing USG with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. USG shall have 10 days from the date of the Regional Administrator's notice to present the information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(d) If after 10 days USG presents no further information, the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>4. <E T="03">Notifications</E>—USG must provide a one-time written notification to any State Regulatory Agency to which or through which the waste described above will be transported for disposal at least 60 days prior to the commencement of such activities. Failure to provide such a notification will result in a violation of the delisting petition and a possible revocation of the decision.</ENT> </ROW> <ROW> <ENT I="01">American Steel Cord</ENT> <ENT>Scottsburg, IN</ENT> <ENT>Wastewater treatment plant (WWTP) sludge from electroplating operations (EPA Hazardous Waste No. F006) generated at a maximum annual rate of 3,000 cubic yards per year, after January 26, 1999, and disposed of in a Subtitle D landfill.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>1. Verification Testing: American Steel Cord must implement an annual testing program to demonstrate, based on the analysis of a minimum of four representative samples, that the constituent concentrations measured in the TCLP extract of the waste are within specific levels. The constituent concentrations must not exceed the following levels (mg/l) which are back-calculated from the delisting health-based levels and a DAF of 68. Arsenic—3.4; Barium—100; Cadmium—.34; Chromium—5; Copper—88.4.; Lead—1.02; Mercury—.136; Nickel—6.8.; Selenium—1; Silver—5; Zinc—680; Cyanide—13.6; Acetone—272; Benzo butyl phthlate—476; Chloroform—.68; 1,4-Dichlorobenzene—.272; cis-1,2-Dichloroethene—27.2; Methylene chloride—.34; Naphthalene—68; Styrene—6.8; Tetrachloroethene—.34; Toluene—68; and Xylene—680. American Steel Cord must measure and record the pH of the waste using SW 846 method 9045 and must record all pH measurements performed in accordance with the TCLP.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>2. Changes in Operating Conditions: If American Steel Cord significantly changes the manufacturing or treatment process or the chemicals used in the manufacturing or treatment process, American Steel Cord may handle the WWTP filter press sludge generated from the new process under this exclusion only after the facility has demonstrated that the waste meets the levels set forth in paragraph 1 and that no new hazardous constituents listed in Appendix VIII of Part 261 have been introduced.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>3. Data Submittals: The data obtained through annual verification testing or compliance with paragraph 2 must be submitted to U.S. EPA Region 5, 77 W. Jackson Blvd., Chicago, IL 60604-3590, within 60 days of sampling. Records of operating conditions and analytical data must be compiled, summarized, and maintained on site for a minimum of five years and must be made available for inspection. All data must be accompanied by a signed copy of the certification statement in 260.22(I)(12).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>4. (a) If, anytime after disposal of the delisted waste, American Steel Cord possesses or is otherwise made aware of any environmental data (including but not limited to leachate data or groundwater monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified in Condition (1) is at a level in the leachate higher than the delisting level established in Condition (1), or is at a level in the ground water or soil higher than the health based level, then American Steel Cord must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <PRTPAGE P="123"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify the facility in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing the facility with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. The facility shall have 10 days from the date of the Regional Administrator's notice to present such information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(d) Following the receipt of information from the facility described in paragraph (c) or (if no information is presented under paragraph (c) the initial receipt of information described in paragraph (a), the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="01">Ampex Recording Media Corporation</ENT> <ENT>Opelika, Alabama</ENT> <ENT>Solvent recovery residues in the powder or pellet form (EPA Hazardous Waste Nos. F003 and F005) generated from the recovery of spent solvents from the manufacture of tape recording media (generated at a maximum annual rate of 1,000 cubic yards in the powder or pellet form) after August 9, 1993. In order to confirm that the characteristics of the wastes do not change significantly, the facility must, on an annual basis, analyze a representative composite sample of the waste (in its final form) for the constituents listed in 40 CFR 261.24 using the method specified therein. The annual analytical results, including quality control information, must be compiled, certified according to 40 CFR 260.22(i)(12), maintained on-site for a minimum of five years, and made available for inspection upon request by any employee or representative of EPA or the State of Alabama. Failure to maintain the required records on-site will be considered by EPA, at its discretion, sufficient basis to revoke the exclusion to the extent directed by EPA.</ENT> </ROW> <ROW> <ENT I="01">Aptus, Inc.</ENT> <ENT>Coffeyville, Kansas</ENT> <ENT>Kiln residue and spray dryer/baghouse residue (EPA Hazardous Waste No. F027) generated during the treatment of cancelled pesticides containing 2,4,5-T and Silvex and related materials by Aptus' incinerator at Coffeyville, Kansas after December 27, 1991, so long as: <LI>(1) The incinerator is monitored continuously and is in compliance with operating permit conditions. Should the incinerator fail to comply with the permit conditions relevant to the mechanical operation of the incinerator, Aptus must test the residues generated during the run when the failure occurred according to the requirements of Conditions (2) through (4), regardless of whether or not the demonstration in Condition (5) has been made. </LI> <LI>(2) A minimum of four grab samples must be taken from each hopper (or other container) of kiln residue generated during each 24-hour run; all grabs collected during a given 24-hour run must then be composited to form one composite sample. A minimum of four grab samples must also be taken from each hopper (or other container) of spray dryer/baghouse residue generated during each 24-hour run; all grabs collected during a given 24-hour run must then be composited to form one composite sample. Prior to the disposal of the residues from each 24-hour run, a TCLP leachate test must be performed on these composite samples and the leachate analyzed for the TC toxic metals, nickel, and cyanide. If arsenic, chromium, lead or silver TC leachate test results exceed 1.6 ppm, barium levels exceed 32 ppm, cadmium or selenium levels exceed 0.3 ppm, mercury levels exceed 0.07 ppm, nickel levels exceed 10 ppm, or cyanide levels exceed 6.5 ppm, the wastes must be retreated to achieve these levels or must be disposed in accordance with subtitle C of RCRA. Analyses must be performed according to appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A (uses EPA Method 1664, Rev. A), 9071B, and 9095B.</LI> <LI>(3) Aptus must generate, prior to the disposal of the residues, verification data from each 24 hour run for each treatment residue (i.e., kiln residue, spray dryer/baghouse residue) to demonstrate that the maximum allowable treatment residue concentrations listed below are not exceeded. Samples must be collected as specified in Condition (2). Analyses must be performed according to appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A (uses EPA Method 1664, Rev. A), 9071B, and 9095B. Any residues which exceed any of the levels listed below must be retreated or must be disposed of as hazardous. Kiln residue and spray dryer/baghouse residue must not exceed the following levels:</LI> </ENT> </ROW> <ROW> <PRTPAGE P="124"/> <ENT I="22"/> <ENT O="xl"/> <ENT>Aldrin—0.015 ppm, Benzene—9.7 ppm, Benzo(a)pyrene—0.43 ppm, Benzo(b)fluoranthene)—1.8 ppm, Chlordane—0.37 ppm, Chloroform—5.4 ppm, Chrysene—170 ppm, Dibenz(a,h)anthracene—0.083 ppm, 1.2-Dichloroethane—4.1 ppm, Dichloromethane—2.4 ppm, 2,4-Dichlorophenol—480 ppm, Dichlorvos—260 ppm, Disulfaton—23 ppm, Endosulfan I—310 ppm, Fluorene—120 ppm, Indeno(1,2,3,cd)-pyrene—330 ppm, Methyl parathion—210 ppm, Nitrosodiphenylamine—130 ppm, Phenanthrene—150 ppm, Polychlorinated biphenyls—0.31 ppm, Tetrachlorethylene—59 ppm, 2,4,5-TP (silvex)—110 ppm, 2,4,6-Trichlorophenol—3.9 ppm.<LI>(4) Aptus must generate, prior to disposal of residues, verification data from each 24-hour run for each treatment residue (i.e., kiln residue, spray dryer/baghouse residue) to demonstrate that the residues do not contain tetra-, penta-, or hexachlorodibenzo-p-dioxins or furans at levels of regulatory concern. Samples must be collected as specified in Condition (2). The TCDD equivalent levels for the solid residues must be less than 5 ppt. Any residues with detected dioxins or furans in excess of this level must be retreated or must be disposed of as acutely hazardous. For tetra- and penta-chlorinated dioxin and furan homologs, the maximum practical quantitation limit must not exceed 15 ppt for the solid residues. For hexachlorinated dioxin and furan homologs, the maximum practical quantitation limit must not exceed 37 ppt for the solid residues.</LI> <LI>(5) The test data from Conditions (1), (2), (3), and (4) must be kept on file by Aptus for inspection purposes and must be compiled, summarized, and submitted to the Director for the Characterization and Assessment Division, Office of Solid Waste, by certified mail on a monthly basis and when the treatment of the cancelled pesticides and related materials is concluded. The testing requirements for Conditions (2), (3), and (4) will continue until Aptus provides the Director with the results of four consecutive batch analyses for the petitioned wastes, none of which exceed the maximum allowable levels listed in these conditions and the director notifies Aptus that the conditions have been lifted. All data submitted will be placed in the RCRA public docket.</LI> <LI>(6) Aptus must provide a signed copy of the following certification statement when submitting data in response to the conditions listed above: “Under civil and criminal penalty of law for the making or submission of false or fraudulent statements or representations, I certify that the information contained in or accompanying this document is true, accurate, and complete. As to the (those) identified section(s) of this document for which I cannot personally verify its (their) truth and accuracy, I certify as the company official having supervisory responsibility for the persons who, acting under my direct instructions, made the verification that this information is true, accurate, and complete.”</LI> </ENT> </ROW> <ROW> <ENT I="01">Arco Building Products</ENT> <ENT>Sugarcreek, Ohio</ENT> <ENT>Dewatered wastewater treatment sludge (EPA Hazardous Waste No. F019) generated from the chemical conversion coating of aluminum after August 15, 1986.</ENT> </ROW> <ROW> <ENT I="01">Arco Chemical Co.</ENT> <ENT>Miami, FL</ENT> <ENT>Dewatered wastewater treatment sludge (EPA Hazardous Waste No. FO19) generated from the chemical conversion coating of aluminum after April 29, 1986.</ENT> </ROW> <ROW> <ENT I="01">Arkansas Department of Pollution Control and Ecology</ENT> <ENT>Vertac Superfund site, Jacksonville, Arkansas</ENT> <ENT>Kiln ash, cyclone ash, and calcium chloride salts from incineration of residues (EPA Hazardous Waste No. F020 and F023) generated from the primary production of 2,4,5-T and 2,4-D after August 24, 1990. This one-time exclusion applies only to the incineration of the waste materials described in the petition, and it is conditional upon the data obtained from ADPC&E's full-scale incineration facility. To ensure that hazardous constituents are not present in the waste at levels of regulatory concern once the full-scale treatment facility is in operation, ADPC&E must implement a testing program for the petitioned waste. This testing program must meet the following conditions for the exclusion to be valid:</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">(1) <E T="03">Testing:</E> Sample collection and analyses (including quality control (QC) procedures) must be performed according to appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A (uses EPA Method 1664, Rev. A), 9071B, and 9095B.</ENT> </ROW> <ROW> <PRTPAGE P="125"/> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi5">(A) <E T="03">Initial testing:</E> Representative grab samples must be taken from each drum and kiln ash and cyclone ash generated from each 24 hours of operation, and the grab samples composited to form one composite sample of ash for each 24-hour period. Representative grab samples must also be taken from each drum of calcium chloride salts generated from each 24 hours of operation and composited to form one composite sample of calcium chloride salts for each 24-hour period. The initial testing requirements must be fullfilled for the following wastes: (i) Incineration by-products generated prior to and during the incinerator's trial burn; (ii) incineration by-products from the treatment of 2,4-D wastes for one week (or 7 days if incineration is not on consecutive days) after completion of the trial burn; (iii) incineration by-products from the treatment of blended 2,4-D and 2,4, 5-T wastes for two weeks (or 14 days if incineration is not on consecutive days) after completion of the trial burn; and (iv) incineration by-products from the treatment of blended 2,4-D and 2,4,5-T wastes for one week (or 7 days if incineration is not on consecutive days) when the percentage of 2, 4, 5-T wastes exceeds the maximum percentage treated under Condition (1)(A)(iii). Prior to disposal of the residues from each 24-hour sampling period, the daily composite must be analyzed for all the constituents listed in Condition (3). ADPC&E must report the analytical test data, including quality control information, obtained during this initial period no later than 90 days after the start of the operation.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi5">(B) <E T="03">Subsequent testing:</E> Representative grab samples of each drum of kiln and cyclone ash generated from each week of operation must be composited to form one composite sample of ash for each weekly period. Representative grab samples of each drum of calcium chloride salts generated from each week of operation must also be composited to form one composite sample of calcium chloride salts for each weekly period.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi5">Prior to disposal of the residues from each weekly sampling period, the weekly composites must be analyzed for all of the constituents listed in Condition (3). The analytical data, including quality control information, must be compiled and maintained on site for a minimum of three years. These data must be furnished upon request and made available for inspection by any employee or representative of EPA.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">(2) <E T="03">Waste holding:</E> The incineration residues that are generated must be stored as hazardous until the initial verification analyses or subsequent analyses are completed.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">If the composite incineration residue samples (from either Condition (1)(A) or Condition (1)(B)) do not exceed any of the delisting levels set in Condition (3), the incineration residues corresponding to these samples may be managed and disposed of in accordance with all applicable solid waste regulations.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">If any composite incineration residue sample exceeds any of the delisting levels set in Condition (3), the incineration residues generated during the time period corresponding to this sample must be retreated until they meet these levels (analyses must be repeated) or managed and disposed of in accordance with subtitle C of RCRA. Incineration residues which are generated but for which analysis is not complete or valid must be managed and disposed of in accordance with subtitle C of RCRA, until valid analyses demonstrate that the wastes meet the delisting levels.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">(3) <E T="03">Delisting levels:</E> If concentrations in one or more of the incineration residues for any of the hazardous constituents listed below exceed their respective maximum allowable concentrations also listed below, the batch of failing waste must either be re-treated until it meets these levels or managed and disposed of in accordance with subtitle C of RCRA.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi5">(A) Inorganics (Leachable): Arsenic, 0.32 ppm; Barium, 6.3 ppm; Cadmium, 0.06 ppm; Chromium, 0.32 ppm; Cyanide, 4.4 ppm; Lead, 0.32 ppm; Mercury, 0.01 ppm; Nickel, 4.4 ppm; Selenium, 0.06 ppm; Silver, 0.32 ppm. Metal concentrations must be measured in the waste leachate as per 40 CFR 261.24. Cyanide extractions must be conducted using distilled water.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi5">(B) Organics: Benzene, 0.87 ppm; Benzo(a)anthracene, 0.10 ppm; Benzo(a)pyrene, 0.04 ppm; Benzo (b)fluoranthene, 0.16 ppm; Chlorobenzene, 152 ppm; o-Chlorophenol, 44 ppm; Chrysene, 15 ppm; 2, 4-D, 107 ppm; DDE, 1.0 ppm; Dibenz(a,h)anthracene, 0.007 ppm; 1, 4-Dichlorobenzene, 265 ppm; 1, 1-Dichloroethylene, 1.3 ppm; trans-1,2-Dichloroethylene, 37 ppm; Dichloromethane, 0.23 ppm; 2,4-Dichlorophenol, 43 ppm; Hexachlorobenzene, 0.26 ppm; Indeno (1,2,3-cd) pyrene, 30 ppm; Polychlorinated biphenyls, 12 ppm; 2,4,5-T, 1 × 10<SU>6</SU> ppm; 1,2,4,5-Tetrachlorobenzene, 56 ppm; Tetrachloroethylene, 3.4 ppm; Trichloroethylene, 1.1 ppm; 2,4,5-Trichlorophenol, 21,000 ppm; 2,4,6-Trichlorophenol, 0.35 ppm.</ENT> </ROW> <ROW> <PRTPAGE P="126"/> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi5">(C) <E T="03">Chlorinated dioxins and furans:</E> 2,3,7,8-Tetrachlorodibenzo-p-dioxin equivalents, 4 × 10<E T="51">−7</E> ppm. The petitioned by-product must be analyzed for the tetra-, penta-, hexa-, and heptachlorodibenzo-p-dioxins, and the tetra-, penta-, hexa-, and heptachlorodibenzofurans to determine the 2, 3, 7, 8-tetra-chlorodibenzo-p-dioxin equivalent concentration. The analysis must be conducted using a measurement system that achieves practical quantitation limits of 15 parts per trillion (ppt) for the tetra- and penta-homologs, and 37 ppt for the hexa- and hepta-homologs.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">(4) <E T="03">Termination of testing:</E> Due to the possible variability of the incinerator feeds, the testing requirements of Condition (1)(B) will continue indefinitely.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">(5) <E T="03">Data submittals:</E> Within one week of system start-up, ADPC&E must notify the Section Chief, Variances Section (see address below) when the full-scale incineration system is on-line and waste treatment has begun. The data obtained through Condition (1)(A) must be submitted to PSPD/OSW (5303W), U.S. EPA, 1200 Pennsylvania Ave., NW., Washington, DC 20460, within the time period specified. At the Section Chief's request, ADPC&E must submit analytical data obtained through Condition (1)(B) within the time period specified by the Section Chief. Failure to submit the required data obtained from Condition (1)(A) within the specified time period or to maintain the required records for the time specified in Condition (1)(B) (or to submit data within the time specified by the Section Chief) will be considered by the Agency, at its discretion, sufficient basis to revoke ADPC&E's exclusion to the extent directed by EPA. All data must be accompanied by the following certification statement:</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT O="oi3">“Under civil and criminal penalty of law for the making or submission of false or fraudulent statements or representations (pursuant to the applicable provisions of the Federal Code, which include, but may not be limited to, 18 U.S.C. 1001 and 42 U.S.C. 6928), I certify that the information contained in or accompanying this document is true, accurate and complete. As to the (those) identified section(s) of this document for which I cannot personally verify its (their) truth and accuracy, I certify as the company official having supervisory responsibility for the persons who, acting under my direct instructions, made the verification that this information is true, accurate and complete. In the event that any of this information is determined by EPA in its sole discretion to be false, inaccurate or incomplete, and upon conveyance of this fact to the company, I recognize and agree that this exclusion of wastes will be void as if it never had effect or to the extent directed by EPA and that the company will be liable for any actions taken in contravention of the company's RCRA and CERCLA obligations premised upon the company's reliance on the void exclusion.”</ENT> </ROW> <ROW> <ENT I="01">AutoAlliance International Inc.</ENT> <ENT>Flat Rock, Michigan</ENT> <ENT>Wastewater treatment sludges, F019, that are generated by AutoAlliance International, Inc. (AAI) at Flat Rock, Michigan at a maximum annual rate of 2,000 cubic yards per year. The sludges must be disposed of in a lined landfill with leachate collection which is licensed, permitted, or otherwise authorized to accept the delisted wastewater treatment sludges in accordance with 40 CFR part 258. The exclusion becomes effective as of April 6, 2007.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) Delisting Levels: (A) The concentrations in a leachate extract of the waste measured in any sample must not exceed the following levels (mg/L): arsenic—0.3; cadmium—0.5; chromium—4.95; lead—5; nickel—90.5; selenium—1; tin—721; zinc—898; p-cresol—11.4; and formaldehyde—84.2.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT>(B) The total concentration measured in any sample must not exceed the following levels (mg/kg): mercury—8.92; and formaldehyde—689.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) Quarterly Verification Testing: To verify that the waste does not exceed the specified delisting levels, AAI must collect and analyze one representative sample of the waste on a quarterly basis. Sample collection and analyses, including quality control procedures, must be performed using appropriate methods. SW-846 Method 1311 must be used for generation of the leachate extract used in the testing of the delisting levels if oil and grease comprise less than 1% of the waste. SW-846 Method 1330A must be used for generation of the leaching extract if oil and grease comprise 1% or more of the waste. SW-846 Method 9071B must be used for determination of oil and grease. SW-846 Methods 1311, 1330A, and 9071B are incorporated by reference in 40 CFR 260.11.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) Changes in Operating Conditions: AAI must notify the EPA in writing if the manufacturing process, the chemicals used in the manufacturing process, the treatment process, or the chemicals used in the treatment process change significantly. AAI must handle wastes generated after the process change as hazardous until it has demonstrated that the wastes continue to meet the delisting levels and that no new hazardous constituents listed in Appendix VIII of part 261 have been introduced and it has received written approval from EPA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(4) Data Submittals: AAI must submit the data obtained through verification testing or as required by other conditions of this rule to both U.S. EPA Region 5, 77 W. Jackson Blvd., Chicago, IL 60604 and MDEQ, Waste and Hazardous Materials Division, Hazardous Waste Section, at P.O. Box 30241, Lansing, Michigan 48909. The quarterly verification data and certification of proper disposal must be submitted annually upon the anniversary of the effective date of this exclusion. AAI must compile, summarize and maintain on site for a minimum of five years records of operating conditions and analytical data. AAI must make these records available for inspection. A signed copy of the certification statement in 40 CFR 260.22(i)(12) must accompany all data.</ENT> </ROW> <ROW> <PRTPAGE P="127"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) Reopener Language: (A) If, anytime after disposal of the delisted waste AAI possesses or is otherwise made aware of any data (including but not limited to leachate data or groundwater monitoring data) relevant to the delisted waste indicating that any constituent is at a level in the leachate higher than the specified delisting level, or is in the groundwater at a concentration higher than the maximum allowable groundwater concentration in paragraph (e), then AAI must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will inform AAI in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing AAI with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. AAI shall have 30 days from the date of the Regional Administrator's notice to present the information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) If after 30 days AAI presents no further information, the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(E) Maximum Allowable Groundwater Concentrations (µg/L): arsenic—5; cadmium—5; chromium—100; lead—15; nickel—750; selenium—50; tin—22,500; zinc—11,300; p-cresol—188; and formaldehyde—1,380.</ENT> </ROW> <ROW> <ENT I="01">BBC Brown Boveri, Inc.</ENT> <ENT>Sanford, FL</ENT> <ENT>Dewatered Wastewater treatment sludges (EPA Hazardous Waste No. F006) generated from electroplating operations after October 17, 1986.</ENT> </ROW> <ROW> <ENT I="01">Bekaert Corp</ENT> <ENT>Dyersburg, TN</ENT> <ENT>Dewatered wastewater treatment plant (WWTP) sludge (EPA Hazardous Waste Nos. F006) generated at a maximum rate of 1250 cubic yards per calendar year after May 27, 2004, and disposed in a Subtitle D landfill.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>For the exclusion to be valid, Bekaert must implement a verification testing program that meets the following paragraphs:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) Delisting Levels: All leachable concentrations for those constituents must not exceed the maximum allowable concentrations in mg/l specified in this paragraph. Bekaert must use the leaching method specified at 40 CFR 261.24 to measure constituents in the waste leachate.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) Inorganic Constituents TCLP (mg/l): Cadmium—0.672; Chromium—5.0; Nickel—127; Zinc—1260.0.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Organic Constituents TCLP (mg/l): Methyl ethyl ketone—200.0.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) Waste Holding and Handling:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) Bekaert must accumulate the hazardous waste dewatered WWTP sludge in accordance with the applicable regulations of 40 CFR 262.34 and continue to dispose of the dewatered WWTP sludge as hazardous waste.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Once the first quarterly sampling and analyses event described in paragraph (3) is completed and valid analyses demonstrate that no constituent is present in the sample at a level which exceeds the delisting levels set in paragraph (1), Bekaert can manage and dispose of the dewatered WWTP sludge as nonhazardous according to all applicable solid waste regulations.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) If constituent levels in any sample taken by Bekaert exceed any of the delisting levels set in paragraph (1), Bekaert must do the following: (i) notify EPA in accordance with paragraph (7) and (ii) manage and dispose the dewatered WWTP sludge as hazardous waste generated under Subtitle C of RCRA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) Quarterly Verification Testing Requirements: Upon this exclusion becoming final, Bekaert may begin the quarterly testing requirements of paragraph (3) on its dewatered WWTP sludge.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) Quarterly Testing Requirements: Upon this exclusion becoming final, Bekaert may perform quarterly analytical testing by sampling and analyzing the dewatered WWTP sludge as follows:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A)(i) Collect four representative composite samples of the hazardous waste dewatered WWTP sludge at quarterly (ninety (90) day) intervals after EPA grants the final exclusion. The first composite sample may be taken at any time after EPA grants the final approval.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(ii) Analyze the samples for all constituents listed in paragraph (1). Any roll-offs from which the composite sample is taken exceeding the delisting levels listed in paragraph (1) must be disposed as hazardous waste in a Subtitle C landfill.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(iii) Within forty-five (45) days after taking its first quarterly sample, Bekaert will report its first quarterly analytical test data to EPA. If levels of constituents measured in the sample of the dewatered WWTP sludge do not exceed the levels set forth in paragraph (1) of this exclusion, Bekaert can manage and dispose the nonhazardous dewatered WWTP sludge according to all applicable solid waste regulations.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(4) Annual Testing:</ENT> </ROW> <ROW> <PRTPAGE P="128"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) If Bekaert completes the quarterly testing specified in paragraph (3) above and no sample contains a constituent with a level which exceeds the limits set forth in paragraph (1), Bekaert may begin annual testing as follows: Bekaert must test one representative composite sample of the dewatered WWTP sludge for all constituents listed in paragraph (1) at least once per calendar year.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) The sample for the annual testing shall be a representative composite sample for all constituents listed in paragraph (1).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) The sample for the annual testing taken for the second and subsequent annual testing events shall be taken within the same calendar month as the first annual sample taken.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) Changes in Operating Conditions: If Bekaert significantly changes the process described in its petition or starts any processes that generate(s) the waste that may or could affect the composition or type of waste generated as established under paragraph (1) (by illustration, but not limitation, changes in equipment or operating conditions of the treatment process), it must notify the EPA in writing; it may no longer handle the wastes generated from the new process as nonhazardous until the wastes meet the delisting levels set in paragraph (1) and it has received written approval to do so from the EPA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(6) Data Submittals: Bekaert must submit the information described below. If Bekaert fails to submit the required data within the specified time or maintain the required records on-site for the specified time, the EPA, at its discretion, will consider this sufficient basis to reopen the exclusion as described in paragraph (7). Bekaert must:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) Submit the data obtained through paragraph (3) to the Chief, North Section, RCRA Enforcement and Compliance Branch, Waste Division, U. S. Environmental Protection Agency Region 4, 61 Forsyth Street, SW., Atlanta, Georgia, 30303, within the time specified.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Compile records of analytical data from paragraph (3), summarized, and maintained on-site for a minimum of five years.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) Furnish these records and data when either the EPA or the State of Tennessee request them for inspection.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) Send along with all data a signed copy of the following certification statement, to attest to the truth and accuracy of the data submitted:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>“Under civil and criminal penalty of law for the making or submission of false or fraudulent statements or representations (pursuant to the applicable provisions of the Federal Code, which include, but may not be limited to, 18 U.S.C. 1001 and 42 U.S.C. 6928), I certify that the information contained in or accompanying this document is true, accurate and complete.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>As to the (those) identified section(s) of this document for which I cannot personally verify its (their) truth and accuracy, I certify as the company official having supervisory responsibility for the persons who, acting under my direct instructions, made the verification that this information is true, accurate and complete. If any of this information is determined by the EPA in its sole discretion to be false, inaccurate or incomplete, and upon conveyance of this fact to the company, I recognize and agree that this exclusion of waste will be void as if it never had effect or to the extent directed by the EPA and that the company will be liable for any actions taken in contravention of the company's RCRA and CERCLA obligations premised upon the company's reliance on the void exclusion.”</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(7) Reopener:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) If, anytime after disposal of the delisted waste Bekaert possesses or is otherwise made aware of any environmental data (including but not limited to leachate data or ground water monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified for the delisting verification testing is at level higher than the delisting level allowed by the Regional Administrator or his delegate in granting the petition, then the facility must report the data, in writing, to the Regional Administrator or his delegate within ten (10) days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) If either the quarterly or annual testing of the waste does not meet the delisting requirements in paragraph (1), Bekaert must report the data, in writing, to the Regional Administrator or his delegate within ten (10) days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) If Bekaert fails to submit the information described in paragraphs (5), (6)(A) or (6)(B) or if any other information is received from any source, the Regional Administrator or his delegate will make a preliminary determination as to whether the reported information requires the EPA action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) If the Regional Administrator or his delegate determines that the reported information requires action the EPA, the Regional Administrator or his delegate will notify the facility in writing of the actions the Regional Administrator or his delegate believes are necessary to protect human health and the environment. The notification shall include a statement of the proposed action and a statement providing the facility with an opportunity to present information as to why the proposed the EPA action is not necessary. The facility shall have ten (10) days from the date of the Regional Administrator or his delegate's notice to present such information.</ENT> </ROW> <ROW> <PRTPAGE P="129"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(E) Following the receipt of information from the facility described in paragraph (6)(D) or (if no information is presented under paragraph (6)(D)) the initial receipt of information described in paragraphs (5), (6)(A) or (6)(B), the Regional Administrator or his delegate will issue a final written determination describing the EPA actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator or his delegate's determination shall become effective immediately, unless the Regional Administrator or his delegate provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(8) Notification Requirements: Bekaert must do following before transporting the delisted waste:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) Provide a one-time written notification to any State Regulatory Agency to which or through which it will transport the delisted waste described above for disposal, sixty (60) days before beginning such activities.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Update the one-time written notification if Bekaert ships the delisted waste into a different disposal facility.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) Failure to provide this notification will result in a violation of the delisting variance and a possible revocation of the decision.</ENT> </ROW> <ROW> <ENT I="01">Bethlehem Steel Corporation</ENT> <ENT>Sparrows Point, Maryland</ENT> <ENT>Stabilized filter cake (at a maximum annual rate of 1100 cubic yards) from the treatment of wastewater treatment sludges (EPA Hazardous Waste No. F006) generated from electroplating operations after [insert date of publication in <E T="04">Federal Register</E>]. Bethlehem Steel (BSC) must implement a testing program that meets the following conditions for the exclusion to be valid:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) <E T="03">Testing:</E> Sample collection and analyses (including quality control (QC) procedures) must be performed using appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A (uses EPA Method 1664, Rev. A), 9071B, and 9095B. If EPA judges the stabilization process to be effective under the conditions used during the initial verification testing, BSC may replace the testing required in Condition (1)(A) with the testing required in Condition (1)(B). BSC must continue to test as specified in Condition (1)(A) until and unless notified by EPA in writing that testing in Condition (1)(A) may be replaced by Condition (1)(B) (to the extent directed by EPA).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) <E T="03">Initial Verification Testing:</E> During at least the first eight weeks of operation of the full-scale treatment system, BSC must collect and analyze weekly composites representative of the stabilized waste. Weekly composites must be composed of representative grab samples collected from every batch during each week of stabilization. The composite samples must be collected and analyzed, prior to the disposal of the stabilized filter cake, for all constituents listed in Condition (3). BSC must report the analytical test data, including a record of the ratios of lime kiln dust and fly ash used and quality control information, obtained during this initial period no later than 60 days after the collection of the last composite of stabilized filter cake.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) <E T="03">Subsequent Verification Testing:</E> Following written notification by EPA, BSC may substitute the testing condition in (1)(B) for (1)(A). BSC must collect and analyze at least one composite representative of the stabilized filter cake generated each month. Monthly composites must be comprised of representative samples collected from all batches that are stabilized in a one-month period. The monthly samples must be analyzed prior to the disposal of the stabilized filter cake for chromium, lead and nickel. BSC may, at its discretion, analyze composite samples more frequently to demonstrate that smaller batches of waste are non-hazardous.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) <E T="03">Annual Verification Testing:</E> In order to confirm that the characteristics of the treated waste do not change significantly, BSC must, on an annual basis, analyze a representative composite sample of stabilized filter cake for all TC constituents listed in 40 CFR § 261.24 using the method specified therein. This composite sample must represent the stabilized filter cake generated over one week.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) <E T="03">Waste Holding and Handling:</E> BSC must store, as hazardous, all stabilized filter cake generated until verification testing (as specified in Conditions (1)(A) and (1)(B)) is completed and valid analyses demonstrate that the delisting levels set forth in Condition (3) are met. If the levels of hazardous constituents measured in the samples of stabilized filter cake generated are below all the levels set forth in Condition (3), then the stabilized filter cake is non-hazardous and may be managed and disposed of in accordance with all applicable solid waste regulations. If hazardous constituent levels in any weekly or monthly composite sample equal or exceed any of the delisting levels set in Condition (3), the stabilized filter cake generated during the time period corresponding to this sample must be retreated until it is below these levels or managed and disposed of in accordance with Subtitle C of RCRA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) <E T="03">Delisting Levels:</E> All concentrations must be measured in the waste leachate by the method specified in 40 CFR § 261.24. The leachable concentrations for the constituents must be below the following levels (ppm): arsenic—4.8; barium—100; cadmium—0.48; chromium—5.0; lead—1.4; mercury—0.19; nickel—9.6; selenium—1.0; silver—5.0.</ENT> </ROW> <ROW> <PRTPAGE P="130"/> <ENT I="11"/> <ENT O="xl"/> <ENT>(4) <E T="03">Changes in Operating Conditions:</E> After completing the initial verification test period in Condition (1)(A), if BSC decides to significantly change the stabilization process (e.g., stabilization reagents) developed under Condition (1), then BSC must notify EPA in writing prior to instituting the change. After written approval by EPA, BSC may manage waste generated from the changed process as non-hazardous under this exclusion, provided the other conditions of this exclusion are fulfilled.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) <E T="03">Data Submittals:</E> Two weeks prior to system start-up, BSC must notify in writing (see address below) when stabilization of the dewatered filter cake will begin. The data obtained through Condition (1)(A) must be submitted to Waste and Chemicals Management Division (Mail Code 3HW11), U.S. EPA Region III, 1650 Arch St., Philadelphia, PA 19103 within the time period specified. The analytical data, including quality control information and records of ratios of lime kiln dust and fly ash used, must be compiled and maintained on site for a minimum of five years. These data must be furnished upon request and made available for inspection by EPA or the State of Maryland. Failure to submit the required data within the specified time period or maintain the required records on site for the specified time will be considered by the Agency, at its discretion, sufficient basis to revoke the exclusion to the extent directed by EPA. All data must be accompanied by a signed copy of the following certification statement to attest to the truth and accuracy of the data submitted:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>“Under civil and criminal penalty of law for the making or submission of false or fraudulent statements or representations (pursuant to the applicable provisions of the Federal Code, which include, but may not be limited to, 18 U.S.C § 1001 and 42 U.S.C § 6928), I certify that the information contained in or accompanying this document is true, accurate and complete.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>As to the (those) identified section(s) of this document for which I cannot personally verify its (their) truth and accuracy, I certify as the company official having supervisory responsibility for the persons who, acting under my direct instructions, made the verification that this information is true, accurate and complete.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>In the event that any of this information is determined by EPA in its sole discretion to be false, inaccurate or incomplete, and upon conveyance of this fact to the company, I recognize and agree that this exclusion of waste will be void as if it never had effect or to the extent directed by EPA and that the company will be liable for any actions taken in contravention of the company's RCRA and CERCLA obligations premised upon the company's reliance on the void exclusion.”</ENT> </ROW> <ROW> <ENT I="01">BMW Manufacturing Co., LLC</ENT> <ENT>Greer, South Carolina</ENT> <ENT>Wastewater treatment sludge (EPA Hazardous Waste No. F019) that BMW Manufacturing Corporation (BMW) generates by treating wastewater from automobile assembly plant located on Highway 101 South in Greer, South Carolina. This is a conditional exclusion for up to 2,850 cubic yards of waste (hereinafter referred to as “BMW Sludge”) that will be generated each year and disposed in a Subtitle D landfill after August 31, 2005. With prior approval by the EPA, following a public comment period, BMW may also beneficially reuse the sludge. BMW must demonstrate that the following conditions are met for the exclusion to be valid.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) Delisting Levels: All leachable concentrations for these metals and cyanide must not exceed the following levels (ppm): Barium-100; Cadmium-1; Chromium-5; Cyanide-33.6, Lead-5; and Nickel-70.3. These metal and cyanide concentrations must be measured in the waste leachate obtained by the method specified in 40 CFR 261.24, except that for cyanide, deionized water must be the leaching medium. Cyanide concentrations in waste or leachate must be measured by the method specified in 40 CFR 268.40, Note 7.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) Annual Verification Testing Requirements: Sample collection and analyses, including quality control procedures, must be performed using appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A, (uses EPA Method 1664, Rev. A), 9071B, and 9095B. Methods must meet Performance Based Measurement System Criteria in which the Data Quality Objectives are to demonstrate that representative samples of the BMW Sludge meet the delisting levels in Condition (1). (A) Annual Verification Testing: BMW must implement an annual testing program to demonstrate that constituent concentrations measured in the TCLP extract do not exceed the delisting levels established in Condition (1).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) Waste Holding and Handling: BMW must hold sludge containers utilized for verification sampling until composite sample results are obtained. If the levels of constituents measured in the composite samples of BMW Sludge do not exceed the levels set forth in Condition (1), then the BMW Sludge is non-hazardous and must be managed in accordance with all applicable solid waste regulations. If constituent levels in a composite sample exceed any of the delisting levels set forth in Condition (1), the batch of BMW Sludge generated during the time period corresponding to this sample must be managed and disposed of in accordance with Subtitle C of RCRA.</ENT> </ROW> <ROW> <PRTPAGE P="131"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(4) Changes in Operating Conditions: BMW must notify EPA in writing when significant changes in the manufacturing or wastewater treatment processes are implemented. EPA will determine whether these changes will result in additional constituents of concern. If so, EPA will notify BMW in writing that the BMW Sludge must be managed as hazardous waste F019 until BMW has demonstrated that the wastes meet the delisting levels set forth in Condition (1) and any levels established by EPA for the additional constituents of concern, and BMW has received written approval from EPA. If EPA determines that the changes do not result in additional constituents of concern, EPA will notify BMW, in writing, that BMW must verify that the BMW Sludge continues to meet Condition (1) delisting levels.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) Data Retention: Records of analytical data from Condition (2) must be compiled, summarized, and maintained by BMW for a minimum of three years, and must be furnished upon request by EPA or the State of South Carolina, and made available for inspection. Failure to maintain the required records for the specified time will be considered by EPA, at its discretion, sufficient basis to revoke the exclusion to the extent directed by EPA. All data must be accompanied by a signed copy of the certification statement in 40 CFR 260.22(i)(12).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(6) Reopener Language: (A) If, at any time after disposal of the delisted waste, BMW possesses or is otherwise made aware of any environmental data (including but not limited to leachate data or groundwater monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified in the delisting verification testing is at a level higher than the delisting level allowed by EPA in granting the petition, BMW must report the data, in writing, to EPA and South Carolina within 10 days of first possessing or being made aware of that data. (B) If the testing of the waste, as required by Condition (2)(A), does not meet the delisting requirements of Condition (1), BMW must report the data, in writing, to EPA and South Carolina within 10 days of first possessing or being made aware of that data. (C) Based on the information described in paragraphs (6)(A) or (6)(B) and any other information received from any source, EPA will make a preliminary determination as to whether the reported information requires that EPA take action to protect human health or the environment. Further action may include suspending or revoking the exclusion, or other appropriate response necessary to protect human health and the environment. (D) If EPA determines that the reported information does require Agency action, EPA will notify the facility in writing of the action believed necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing BMW with an opportunity to present information as to why the proposed action is not necessary. BMW shall have 10 days from the date of EPA's notice to present such information. (E) Following the receipt of information from BMW, as described in paragraph (6)(D), or if no such information is received within 10 days, EPA will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment, given the information received in accordance with paragraphs (6)(A) or (6)(B). Any required action described in EPA's determination shall become effective immediately, unless EPA provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(7) Notification Requirements: BMW must provide a one-time written notification to any State Regulatory Agency in a State to which or through which the delisted waste described above will be transported, at least 60 days prior to the commencement of such activities. Failure to provide such a notification will result in a violation of the delisting conditions and a possible revocation of the decision to delist.</ENT> </ROW> <ROW> <ENT I="01">Boeing Commercial Airplane Co.</ENT> <ENT>Auburn, Washington</ENT> <ENT>Residually contaminated soils in an inactive sludge pile containment area on March 27, 1990, previously used to store wastewater treatment sludges generated from electroplating operations (EPA Hazardous Waste No. F006).</ENT> </ROW> <ROW> <ENT I="01">Bommer Industries Inc.</ENT> <ENT>Landrum, SC</ENT> <ENT>Wastewater treatment sludges (EPA Hazardous Waste No. F006) generated from their electroplating operations and contained in evaporation ponds #1 and #2 on August 12, 1987.</ENT> </ROW> <ROW> <ENT I="01">BWX] Technologies</ENT> <ENT>Lynchburg, VA</ENT> <ENT>Wastewater treatment sludge from electroplating operations (EPA Hazardous Waste No. F006) generated at a maximum annual rate of 500 cubic yards per year, after January 14, 2000, and disposed of in a Subtitle D landfill. BWX Technologies must meet the following conditions for the exclusion to be valid:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) Delisting Levels: All leachable concentrations for the following constituents measure using the SW-846 method 1311 (the TCLP) must not exceed the following levels (mg/l). (a) Inorganic constituents—Antimony-0.6; Arsenic-5.0; Barium-100; Beryllium-0.4; Cadmium-0.5; Chromium-5.0; Cobalt-210; Copper-130; Lead-1.5; Mercury-0.2; Nickel-70; Silver-5.0; Thallium-0.2; Tin-2100; Zinc-1000; Fluoride-400. (b) Organic constituents—Acetone-400; Methylene Chloride-0.5.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) Verification testing schedule: BWX Technologies must analyze a representative sample of the filter cake from the pickle acid treatment system on an annual, calendar year basis using methods with appropriate detection levels and quality control procedures. If the level of any constituent measured in the sample of filter cake exceeds the levels set forth in Paragraph 1, then the waste is hazardous and must be managed in accordance with Subtitle C of RCRA. Data from the annual verification testing must be submitted to EPA within 60 days of the sampling event.</ENT> </ROW> <ROW> <PRTPAGE P="132"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) Changes in Operating Conditions: If BWX Technologies significantly changes the manufacturing or treatment process described in the petition, or the chemicals used in the manufacturing or treatment process, BWX Technologies may not manage the filter cake generated from the new process under this exclusion until it has met the following conditions: (a) BWX Technologies must demonstrate that the waste meets the delisting levels set forth in Paragraph 1; (b) it must demonstrate that no new hazardous constituents listed in appendix VIII of part 261 have been introduced into the manufacturing or treatment process: and (c) it must obtain prior written approval from EPA to manage the waste under this exclusion.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(4) Data Submittals: The data obtained under Paragraphs 2 and 3 must be submitted to The Waste and Chemicals Management Division, U.S. EPA Region III, 1650 Arch Street, Philadelphia, PA 19103. Records of operating conditions and analytical data must be compiled, summarized, and maintained on site for a minimum of five years and must be furnished upon request by EPA or the Commonwealth of Virginia, and made available for inspection. Failure to submit the required data within the specified time period or to maintain the required records on site for the specified time period will be considered by EPA, at its discretion, sufficient basis to revoke the exclusion to the extent determined necessary by EPA. All data must be accompanied by a signed copy of the certification statement set forth in 40 CFR 260.22(i)(12) to attest to the truth and accuracy of the data submitted.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) Reopener:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(a) If BWX Technologies discovers that a condition at the facility or an assumption related to the disposal of the excluded waste that was modeled or predicted in the petition does not occur as modeled or predicted, then BWX Technologies must report any information relevant to that condition, in writing, to the Regional Administrator or his delegate within 10 days of discovering that condition.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) Upon receiving information described in paragraph (a) of this section, regardless of its source, the Regional Administrator or his delegate will determine whether the reported condition requires further action. Further action may include repealing the exclusion, modifying the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(6) Notification Requirements: BWX Technologies must provide a one-time written notification to any State Regulatory Agency to which or through which the delisted waste described above will be transported for disposal at least 60 days prior to the commencement of such activities. Failure to provide such a notification will be deemed to be a violation of this exclusion and may result in a revocation of the decision.</ENT> </ROW> <ROW> <ENT I="01">Capitol Products Corp.</ENT> <ENT>Harrisburg, PA</ENT> <ENT>Dewatered wastewater treatment sludges (EPA Hazardous Waste No. FO19) generated from the chemical conversion coating of aluminum after September 12, 1986.</ENT> </ROW> <ROW> <ENT I="01">Capitol Products Corporation</ENT> <ENT>Kentland, IN</ENT> <ENT>Dewatered wastewater treatment sludges (EPA Hazardous Waste No. F019) generated from the chemical conversion coating of aluminum after November 17, 1986.</ENT> </ROW> <ROW> <ENT I="01">Care Free Aluminum Products, Inc.</ENT> <ENT>Charlotte, Michigan</ENT> <ENT>Wastewater treatment sludge (EPA Hazardous Waste No. F019) generated from the chemical conversion coating of aluminum (generated at a maximum annual rate of 100 cubic yards), after August 21, 1992. In order to confirm that the characteristics of the waste do not change significantly, the facility must, on an annual basis, analyze a representative composite sample for the constituents listed in § 261.24 using the method specified therein. The annual analytical results, including quality control information, must be compiled, certified according to § 260.22(i)(12), maintained on-site for a minimum of five years, and made available for inspection upon request by any employee or representative of EPA or the State of Michigan. Failure to maintain the required records on-site will be considered by EPA, at its discretion, sufficient basis to revoke the exclusion to the extent directed by EPA.</ENT> </ROW> <ROW> <ENT I="01">Chamberlian-Featherlite, Inc.</ENT> <ENT>Hot Springs, AR</ENT> <ENT>Dewatered wastewater treatment sludges (EPA Hazardous Waste No. F019) generated from the chemical conversion coating of aluminum after July 16, 1986.</ENT> </ROW> <ROW> <ENT I="01">Cincinnati Metropolitan Sewer District</ENT> <ENT>Cincinnati, OH</ENT> <ENT>Sluiced bottom ash (approximately 25,000 cubic yards) contained in the South Lagoon, on September 13, 1985 which contains EPA Hazardous Waste Nos. F001, F002, F003, F004, and F005.</ENT> </ROW> <ROW> <ENT I="01">Clay Equipment Corporation</ENT> <ENT>Cedar Falls, Iowa</ENT> <ENT>Dewatered wastewater treatment sludges (EPA Hazardous Waste No. F006) and spent cyanide bath solutions (EPA Hazardous Waste No. F009) generated from electroplating operations and disposed of in an on-site surface impoundment. This is a onetime exclusion. This exclusion was published on August 1, 1989.</ENT> </ROW> <ROW> <ENT I="01">Continental Can Co.</ENT> <ENT>Olympia, WA</ENT> <ENT>Dewatered wastewater treatment sludges (DPA Hazardous Waste No. FO19) generated from the chemical conversion coating of aluminum after September 12, 1986.</ENT> </ROW> <ROW> <ENT I="01">DaimlerChrysler Corporation</ENT> <ENT>Jefferson North Assembly Plant, Detroit, Michigan</ENT> <ENT>Waste water treatment plant sludge, F019, that is generated by DaimlerChrysler Corporation at the Jefferson North Assembly Plant (DCC-JNAP) at a maximum annual rate of 2,000 cubic yards per year. The sludge must be disposed of in a lined landfill with leachate collection, which is licensed, permitted, or otherwise authorized to accept the delisted wastewater treatment sludge in accordance with 40 CFR part 258. The exclusion becomes effective as of February 26, 2004.</ENT> </ROW> <ROW> <PRTPAGE P="133"/> <ENT I="22"/> <ENT O="xl"/> <ENT>1. <E T="03">Delisting Levels:</E> (A) The concentrations in a TCLP extract of the waste measured in any sample may not exceed the following levels (mg/L): Antimony—0.659; Arsenic—0.3; Cadmium—0.48; Chromium—4.95; Lead—5; Nickel—90.5; Selenium—1; Thallium—0.282; Tin—721; Zinc—898; Acetone—228; p-Cresol—11.4; Formaldehyde—84.2; and Methylene chloride—0.288. (B) The total concentrations measured in any sample may not exceed the following levels (mg/kg): Mercury—8.92; and Formaldehyde—689. (C) The sum of the ratios of the TCLP concentrations to the delisting levels for nickel and either thallium or cadmium shall not exceed 1.0.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>2. <E T="03">Quarterly Verification Testing:</E> To verify that the waste does not exceed the specified delisting levels, DCC-JNAP must collect and analyze one representative sample of the waste on a quarterly basis.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>3. <E T="03">Changes in Operating Conditions:</E> DCC-JNAP must notify the EPA in writing if the manufacturing process, the chemicals used in the manufacturing process, the treatment process, or the chemicals used in the treatment process significantly change. DCC-JNAP must handle wastes generated after the process change as hazardous until it has demonstrated that the wastes continue to meet the delisting levels and that no new hazardous constituents listed in appendix VIII of part 261 have been introduced and it has received written approval from EPA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>4. <E T="03">Data Submittals:</E> DCC-JNAP must submit the data obtained through verification testing or as required by other conditions of this rule to both U.S. EPA Region 5, Waste Management Branch (DW-8J), 77 W. Jackson Blvd., Chicago, IL 60604 and MDEQ, Waste Management Division, Hazardous Waste Program Section, at P.O. Box 30241, Lansing, Michigan 48909. The quarterly verification data and certification of proper disposal must be submitted annually upon the anniversary of the effective date of this exclusion. The facility must compile, summarize, and maintain on site for a minimum of five years records of operating conditions and analytical data. The facility must make these records available for inspection. All data must be accompanied by a signed copy of the certification statement in 40 CFR 260.22(i)(12).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>5. <E T="03">Reopener Language</E>—(a) If, anytime after disposal of the delisted waste, DCC-JNAP possesses or is otherwise made aware of any data (including but not limited to leachate data or groundwater monitoring data) relevant to the delisted waste indicating that any constituent is at a level in the leachate higher than the specified delisting level, or is in the groundwater at a concentration higher than the maximum allowable groundwater concentration in paragraph (e), then DCC-JNAP must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify DCC-JNAP in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing DCC-JNAP with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. DCC-JNAP shall have 30 days from the date of the Regional Administrator's notice to present the information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(d) If after 30 days the facility presents no further information, the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(e) <E T="03">Maximum Allowable Groundwater Concentrations</E> (µg/L): Antimony—6; Arsenic—4.87; Cadmium—5; Chromium—100; Lead—15; Nickel—750; Selenium—50; Thallium—2; Tin—22,500; Zinc—11,300; acetone—3,750; p-Cresol—188; Formaldehyde—1,380; and Methylene chloride—5.</ENT> </ROW> <ROW> <ENT I="01">Dover Corp., Norris Div.</ENT> <ENT>Tulsa, OK</ENT> <ENT>Dewatered wastewater treatment sludge (EPA Hazardous Waste No. FO06) generated from their electroplating operations after April 29, 1986.</ENT> </ROW> <ROW> <ENT I="01">DuraTherm, Incorporated</ENT> <ENT>San Leon, Texas</ENT> <ENT>Desorber solids, (at a maximum generation of 20,000 cubic yards per calendar year) generated by DuraTherm using the thermal desorption treatment process, (EPA Hazardous Waste No. F037 and F038) and that is disposed of in subtitle D landfills after April 24, 2000.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>For the exclusion to be valid, DuraTherm must implement a testing program that meets the following Paragraphs:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) <E T="03">Delisting Levels:</E> All leachable concentrations for those constituents must not exceed the following levels (ppm). The petitioner must use an acceptable leaching method, for example SW-846, Method 1311 to measure constituents in the waste leachate.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>Desorber solids (i) Inorganic Constituents Arsenic—1.35; Antimony—0.162; Barium—54.0; Beryllium—0.108; Cadmium—0.135; Chromium—0.6; Lead—0.405; Nickel—2.7; Selenium—1.0; Silver—5.0; Vanadium—5.4; Zinc—270.</ENT> </ROW> <ROW> <PRTPAGE P="134"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(ii) Organic Constituents Anthracene—0.28; Benzene—0.135; Benzo(a) anthracene—0.059; Benzo(b)fluoranthene—0.11; Benzo(a)pyrene—0.061; Bis-ethylhexylphthalate—0.28; Carbon Disulfide—3.8; Chlorobenzene—0.057; Chrysene—0.059; o,m,p Cresols—54; Dibenzo (a,h) anthracene—0.055; 2,4 Dimethyl phenol—18.9; Dioctyl phthalate—0.017; Ethylbenzene—0.057; Fluoranthene—0.068; Fluorene—0.059; Naphthalene—0.059; Phenanthrene—0.059; Phenol—6.2; Pyrene—0.067; Styrene—2.7; Trichloroethylene—0.054; Toluene—0.08; Xylene—0.032</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) <E T="03">Waste Holding and Handling:</E> (A) DuraTherm must store the desorber solids as described in its RCRA permit, or continue to dispose of as hazardous all desorber solids generated, until they have completed verification testing described in Paragraph (3)(A) and (B), as appropriate, and valid analyses show that paragraph (1) is satisfied.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) In order to isolate wastes that have been processed in the unit prior to one of the waste codes to be delisted, DuraTherm must designate the first batch of F037, F038, K048, K049, K050, or K051 wastes as hazardous. Subsequent batches of these wastes which satisfy paragraph (1) are eligible for delisting if they meet the criteria in paragraph (1) and no additional constituents (other than those of the delisted waste streams) from the previously processed wastes are detected.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) Levels of constituents measured in the samples of the desorber solids that do not exceed the levels set forth in Paragraph (1) are nonhazardous. DuraTherm can manage and dispose the nonhazardous desorber solids according to all applicable solid waste regulations.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) If constituent levels in a sample exceed any of the delisting levels set in Paragraph (1), DuraTherm must retreat or stabilize the batches of waste used to generate the representative sample until it meets the levels in paragraph(1). DuraTherm must repeat the analyses of the treated waste.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(E) If the facility has not treated the waste, DuraTherm must manage and dispose the waste generated under subtitle C of RCRA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) <E T="03">Verification Testing Requirements:</E> DuraTherm must perform sample collection and analyses, including quality control procedures, using appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A (uses EPA Method 1664, Rev. A), 9071B, and 9095B. If EPA judges the process to be effective under the operating conditions used during the initial verification testing, DuraTherm may replace the testing required in Paragraph (3)(A) with the testing required in Paragraph (3)(B). DuraTherm must continue to test as specified in Paragraph (3)(A) until and unless notified by EPA in writing that testing in Paragraph (3)(A) may be replaced by Paragraph (3)(B).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) <E T="03">Initial Verification Testing:</E> After EPA grants the final exclusion, DuraTherm must do the following:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(i) Collect and analyze composites of the desorber solids.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(ii) Make two composites of representative grab samples collected.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(iii) Analyze the waste, before disposal, for all of the constituents listed in Paragraph 1.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(iv) Sixty (60) days after this exclusion becomes final, report the operational and analytical test data, including quality control information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(v) Submit the test plan for conducting the multiple pH leaching procedure to EPA for approval at least 10 days before conducting the analysis.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(vi) Conduct a multiple pH leaching procedure on 10 samples collected during the sixty-day test period.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(vii) The ten samples should include both non-stabilized and stabilized residual solids. If none of the samples collected during the sixty-day test period need to be stabilized, DuraTherm should provide multiple pH data on the first sample of stabilized wastes generated.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(vii) Perform the toxicity characteristic leaching procedure using three different pH extraction fluids to simulate disposal under three conditions and submit the results within 60 days of completion. Simulate an acidic landfill environment, basic landfill environment, and a landfill environment similar to the pH of the waste.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) <E T="03">Subsequent Verification Testing:</E> Following written notification by EPA, DuraTherm may substitute the testing conditions in (3)(B) for (3)(A)(i). DuraTherm must continue to monitor operating conditions, and analyze representative samples each quarter of operation during the first year of waste generation. The samples must represent the waste generated in one quarter. DuraTherm must run the multiple pH procedure on these waste samples.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) <E T="03">Termination of Organic Testing:</E> (i) DuraTherm must continue testing as required under Paragraph (3)(B) for organic constituents in Paragraph (1)(A)(ii), until the analytical results submitted under Paragraph (3)(B) show a minimum of two consecutive samples below the delisting levels in Paragraph (1)(A)(i), DuraTherm may then request that EPA stop quarterly organic testing. After EPA notifies DuraTherm in writing, the company may end quarterly organic testing.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(ii) Following cancellation of the quarterly testing, DuraTherm must continue to test a representative composite sample for all constituents listed in Paragraph (1) annually (by twelve months after final exclusion).</ENT> </ROW> <ROW> <PRTPAGE P="135"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(4) <E T="03">Changes in Operating Conditions:</E> If DuraTherm significantly changes the process described in its petition or starts any processes that generate(s) the waste that may or could affect the composition or type of waste generated as established under Paragraph (1) (by illustration, but not limitation, changes in equipment or operating conditions of the treatment process), they must notify EPA in writing; they may no longer handle the wastes generated from the new process as nonhazardous until the wastes meet the delisting levels set in Paragraph (1) and they have received written approval to do so from EPA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) <E T="03">Data Submittals:</E> DuraTherm must submit the information described below. If DuraTherm fails to submit the required data within the specified time or maintain the required records on-site for the specified time, EPA, at its discretion, will consider this sufficient basis to reopen the exclusion as described in Paragraph 6. DuraTherm must:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) Submit the data obtained through Paragraph 3 to Mr. William Gallagher, Chief, Region 6 Delisting Program, EPA, 1445 Ross Avenue, Dallas, Texas 75202-2733, Mail Code, (6PD-O) within the time specified.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Compile records of operating conditions and analytical data from Paragraph (3), summarized, and maintained on-site for a minimum of five years.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) Furnish these records and data when EPA or the State of Texas request them for inspection.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) Send along with all data a signed copy of the following certification statement, to attest to the truth and accuracy of the data submitted:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>Under civil and criminal penalty of law for the making or submission of false or fraudulent statements or representations (pursuant to the applicable provisions of the Federal Code, which include, but may not be limited to, 18 U.S.C. 1001 and 42 U.S.C. 6928), I certify that the information contained in or accompanying this document is true, accurate and complete.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>As to the (those) identified section(s) of this document for which I cannot personally verify its (their) truth and accuracy, I certify as the company official having supervisory responsibility for the persons who, acting under my direct instructions, made the verification that this information is true, accurate and complete.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>If any of this information is determined by EPA in its sole discretion to be false, inaccurate or incomplete, and upon conveyance of this fact to the company, I recognize and agree that this exclusion of waste will be void as if it never had effect or to the extent directed by EPA and that the company will be liable for any actions taken in contravention of the company's RCRA and CERCLA obligations premised upon the company's reliance on the void exclusion.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(6) <E T="03">Reopener Language:</E> (A) If, anytime after disposal of the delisted waste, DuraTherm possesses or is otherwise made aware of any environmental data (including but not limited to leachate data or groundwater monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified for the delisting verification testing is at level higher than the delisting level allowed by the Regional Administrator or his delegate in granting the petition, then the facility must report the data, in writing, to the Regional Administrator or his delegate within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) If the annual testing of the waste does not meet the delisting requirements in Paragraph 1, DuraTherm must report the data, in writing, to the Regional Administrator or his delegate within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) If DuraTherm fails to submit the information described in paragraphs (5),(6)(A) or (6)(B) or if any other information is received from any source, the Regional Administrator or his delegate will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(D) If the Regional Administrator or his delegate determines that the reported information does require Agency action, the Regional Administrator or his delegate will notify the facility in writing of the actions the Regional Administrator or his delegate believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing the facility with an opportunity to present information as to why the proposed Agency action is not necessary. The facility shall have 10 days from the date of the Regional Administrator or his delegate's notice to present such information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(E) Following the receipt of information from the facility described in paragraph (6)(D) or (if no information is presented under paragraph (6)(D)) the initial receipt of information described in paragraphs (5), (6)(A) or (6)(B), the Regional Administrator or his delegate will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator or his delegate's determination shall become effective immediately, unless the Regional Administrator or his delegate provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(7) <E T="03">Notification Requirements:</E> DuraTherm must do following before transporting the delisted waste: Failure to provide this notification will result in a violation of the delisting petition and a possible revocation of the decision.</ENT> </ROW> <ROW> <PRTPAGE P="136"/> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) Provide a one-time written notification to any State Regulatory Agency to which or through which they will transport the delisted waste described above for disposal, 60 days before beginning such activities.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) Update the one-time written notification if they ship the delisted waste into a different disposal facility.</ENT> </ROW> <ROW> <ENT I="01">Eastman Chemical Company</ENT> <ENT>Longview, Texas</ENT> <ENT>Wastewater treatment sludge, (at a maximum generation of 82,100 cubic yards per calendar year) generated by Eastman (EPA Hazardous Waste Nos. F001, F002, F003, F005 generated at Eastman when disposed of in a Subtitle D landfill.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>Eastman must implement a testing program that meets the following conditions for the exclusion to be valid:</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(1) <E T="03">Delisting Levels:</E> All concentrations for the following constituents must not exceed the following levels (mg/l). For the wastewater treatment sludge constituents must be measured in the waste leachate by the method specified in 40 CFR 261.24. Wastewater treatment sludge:</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(i) Inorganic Constituents: Antimony-0.0515; Barium-7.30; Cobalt-2.25; Chromium-5.0; Lead-5.0; Mercury-0.0015; Nickel-2.83; Selenium-0.22; Silver-0.384; Vanadium-2.11; Zinc-28.0</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(ii) Organic Constituents: Acenaphthene-1.25; Acetone—7.13; bis(2-ethylhexylphthalate—0.28; 2-butanone—42.8; Chloroform—0.0099; Fluorene—0.55; Methanol-35.7; Methylene Chloride—0.486; naphthalene-0.0321.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(2) <E T="03">Waste Holding and Handling:</E> If the concentrations of the sludge exceed the levels provided in Condition 1, then the sludge must be treated in the Fluidized Bed Incinerator (FBI) and meet the requirements of that September 25, 1996 delisting exclusion to be non-hazardous (as FBI ash). If the sludge meets the delisting levels provided in Condition 1, then it's non-hazardous (as sludge). If the waste water treatment sludge is not managed in the manner above, Eastman must manage it in accordance with applicable RCRA Subtitle C requirements. If the levels of constituents measured in the samples of the waste water treatment sludge do not exceed the levels set forth in Condition (1), then the waste is nonhazardous and may be managed and disposed of in accordance with all applicable solid waste regulations. During the verification period, Eastman must manage the waste in the FBI incinerator prior to disposal.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(3) <E T="03">Verification Testing Requirements:</E> Eastman must perform sample collection and analyses, including quality control procedures, using appropriate methods. As applicable to the method-defined parameters of concern, analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11 must be used without substitution. As applicable, the SW-846 methods might include Methods 0010, 0011, 0020, 0023A, 0030, 0031, 0040, 0050, 0051, 0060, 0061, 1010A, 1020B, 1110A, 1310B, 1311, 1312, 1320, 1330A, 9010C, 9012B, 9040C, 9045D, 9060A, 9070A (uses EPA Method 1664, Rev. A), 9071B, and 9095B. After completion of the initial verification period, Eastman may replace the testing required in Condition (3)(A) with the testing required in Condition (3)(B). Eastman must continue to test as specified in Condition (3)(A) until and unless notified by EPA in writing that testing in Condition (3)(A) may be replaced by Condition (3)(B).</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(A) <E T="03">Initial Verification Testing:</E> At quarterly intervals for one year after the final exclusion is granted, Eastman must collect and analyze composites of the wastewater treatment sludge for constituents listed in Condition (1).</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(B) <E T="03">Subsequent Verification Testing:</E> Following termination of the quarterly testing, Eastman must continue to test a representative composite sample for all constituents listed in Condition (1) on an annual basis (no later than twelve months after the final exclusion).</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(4) <E T="03">Changes in Operating Conditions.</E> If Eastman significantly changes the process which generate(s) the waste(s) and which may or could affect the composition or type of waste(s) generated as established under Condition (1) (by illustration, but not limitation, change in equipment or operating conditions of the treatment process or generation of volumes in excess 82,100 cubic yards of waste annually), Eastman must (A) notify the EPA in writing of the change and (B) may no longer handle or manage the waste generated from the new process as nonhazardous until Eastman has demonstrated through testing the waste meets the delisting levels set in Condition (1) and (C) Eastman has received written approval to begin managing the wastes as non-hazardous from EPA.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(5) <E T="03">Data Submittals.</E> Eastman must submit or maintain, as applicable, the information described below. If Eastman fails to submit the required data within the specified time or maintain the required records on-site for the specified time, EPA, at its discretion, will consider this sufficient basis to reopen the exclusion as described in Condition (6). Eastman must:</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(A) Submit the data obtained through Condition (3) to Mr. William Gallagher, Chief, Region 6 Delisting Program, EPA, 1445 Ross Avenue, Dallas, Texas 75202-2733, Mail Code, (6PD-O) within the time specified.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(B) Compile records of operating conditions and analytical data from Condition (3), summarized, and maintained on-site for a minimum of five years.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(C) Furnish these records and data when EPA or the State of Texas request them for inspection.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(D) Send along with all data a signed copy of the following certification statement, to attest to the truth and accuracy of the data submitted:</ENT> </ROW> <ROW> <PRTPAGE P="137"/> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(i) Under civil and criminal penalty of law for the making or submission of false or fraudulent statements or representations (pursuant to the applicable provisions of the Federal Code, which include, but may not be limited to, 18 U.S.C. 1001 and 42 U.S.C. 6928), I certify that the information contained in or accompanying this document is true, accurate and complete.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(ii) As to the (those) identified section(s) of this document for which I cannot personally verify its (their) truth and accuracy, I certify as the company official having supervisory responsibility for the persons who, acting under my direct instructions, made the verification that this information is true, accurate and complete.<LI>(iii) If any of this information is determined by EPA in its sole discretion to be false, inaccurate or incomplete, and upon conveyance of this fact to the company, I recognize and agree that this exclusion of waste will be void as if it never had effect or to the extent directed by EPA and that the company will be liable for any actions taken in contravention of the company's RCRA and CERCLA obligations premised upon the company's reliance on the void exclusion.</LI> </ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(6) <E T="03">Reopener Language:</E> </ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(A) If, anytime after disposal of the delisted waste, Eastman possesses or is otherwise made aware of any environmental data (including but not limited to leachate data or groundwater monitoring data) or any other data relevant to the delisted waste indicating that any constituent identified for the delisting verification testing is at level higher than the delisting level allowed by the Regional Administrator or his delegate in granting the petition, then the facility must report the data, in writing, to the Regional Administrator or his delegate within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(B) If the annual testing of the waste does not meet the delisting requirements in Condition (1), Eastman must report the data, in writing, to the Regional Administrator or his delegate within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(C) If Eastman fails to submit the information described in Conditions (5),(6)(A) or (6)(B) or if any other information is received from any source, the Regional Administrator or his delegate will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(D) If the Regional Administrator or his delegate determines that the reported information does require Agency action, the Regional Administrator or his delegate will notify the facility in writing of the actions the Regional Administrator or his delegate believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing the facility with an opportunity to present information as to why the proposed Agency action is not necessary. The facility shall have 10 days from the date of the Regional Administrator or his delegate's notice to present such information.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(E) Following the receipt of information from the facility described in Condition (6)(D) or (if no information is presented under Condition (6)(D)) the initial receipt of information described in Conditions (5), (6)(A) or (6)(B), the Regional Administrator or his delegate will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator or his delegate's determination shall become effective immediately, unless the Regional Administrator or his delegate provides otherwise.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(7) <E T="03">Notification Requirements.</E> Eastman must do following before transporting the delisted waste off-site: Failure to provide this notification will result in a violation of the delisting petition and a possible revocation of the exclusion.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(A) Provide a one-time written notification to any State Regulatory Agency to which or through which they will transport the delisted waste described above for disposal, 60 days before beginning such activities.</ENT> </ROW> <ROW> <ENT I="01" O="xl"/> <ENT O="xl"/> <ENT>(B) Update the one-time written notification if they ship the delisted waste into a different disposal facility.</ENT> </ROW> <ROW> <ENT I="01">Eli Lilly and Company</ENT> <ENT>Clinton, Indiana</ENT> <ENT>Incinerator scrubber liquids, entering and contained in their onsite surface impoundment, and solids settling from these liquids originating from the burning of spent solvents (EPA Hazardous Waste Nos. F002, F003, and F005) contained in their onsite surface impoundment and solids retention area on August 18, 1988 and any new incinerator scubber liquids and settled solids generated in the surface impoundment and disposed of in the retention are after August 12, 1988.</ENT> </ROW> <ROW> <ENT I="01">Envirite of Illinois (formerly Envirite Corporation)</ENT> <ENT>Harvey, Illinois</ENT> <ENT>See waste description under Envirite of Pennsylvania.</ENT> </ROW> <ROW> <ENT I="01">Envirite of Ohio (formerly Envirite Corporation)</ENT> <ENT>Canton, Ohio</ENT> <ENT>See waste description under Envirite of Pennsylvania.</ENT> </ROW> <ROW> <PRTPAGE P="138"/> <ENT I="01">Envirite of Pennsylvania (formerly Envirite Corporation)</ENT> <ENT>York, Pennsylvania</ENT> <ENT>Dewatered wastewater sludges (EPA Hazardous Waste No .F006) generated from electroplating operations; spent cyanide plating solutions (EPA Hazardous Waste No. F007) generated from electroplating operations; plating bath residues from the bottom of plating baths (EPA Hazardous Waste No. F008) generated from electroplating operations where cyanides are used in the process; spent stripping and cleaning bath solutions (EPA Hazardous Waste No. F009) generated from electroplating operations where cyanides are used in the process; spent cyanide solutions from salt bath pot cleaning (EPA Hazardous Waste No. F011) generated from metal heat treating operations; quenching wastewater treatment sludges (EPA Hazardous Waste No. F012) generated from metal heat treating where cyanides are used in the process; wastewater treatment sludges (EPA Hazardous Waste No. F019) generated from the chemical conversion coating of aluminum after November 14, 1986. To ensure that hazardous constituents are not present in the waste at levels of regulatory concern, the facility must implement a contingency testing program for the petitioned waste. This testing program must meet the following conditions for the exclusions to be valid:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) Each batch of treatment residue must be representatively sampled and tested using the EP Toxicity test for arsenic, barium, cadmium, chromium, lead, selenium, silver, mercury, and nickel. If the extract concentrations for chromium, lead, arsenic, and silver exceed 0.315 ppm; barium levels exceed 6.3 ppm; cadmium and selenium exceed 0.063 ppm; mercury exceeds 0.0126 ppm; or nickel levels exceed 2.205 ppm; the waste must be re-treated or managed and disposed as a hazardous waste under 40 CFR Parts 262 to 265 and the permitting standards of 40 CFR Part 270.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) Each batch of treatment residue must be tested for leachable cyanide. If the leachable cyanide levels (using the EP Toxicity test without acetic acid adjustment) exceed 1.26 ppm, the waste must be re-treated or managed and disposed as a hazardous waste under 40 CFR Parts 262 to 265 and the permitting standards of 40 CFR Part 270.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) Each batch of waste must be tested for the total content of specific organic toxicants. If the total content of anthracene exceeds 76.8 ppm, 1,2-diphenyl hydrazine exceeds 0.001 ppm, methylene chloride exceeds 8.18 ppm, methyl ethyl ketone exceeds 326 ppm, n-nitrosodiphenylamine exceeds 11.9 ppm, phenol exceeds 1,566 ppm, tetrachloroethylene exceeds 0.188 ppm, or trichloroethylene exceeds 0.592 ppm, the waste must be managed and disposed as a hazardous waste under 40 CFR Parts 262 to 265 and the permitting standards of 40 CFR Part 270.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(4) A grab sample must be collected from each batch to form one monthly composite sample which must be tested using GC/MS analysis for the compounds listed in #3, above, as well as the remaining organics on the priority pollutant list. (See 47 FR 52309, November 19, 1982, for a list of the priority pollutants.)</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(5) The data from conditions 1-4 must be kept on file at the facility for inspection purposes and must be compiled, summarized, and submitted to the Administrator by certified mail semi-annually. The Agency will review this information and if needed will propose to modify or withdraw the exclusion. The organics testing described in conditions 3 and 4, above, are not required until six months from the date of promulgation. The Agency's decision to conditionally exclude the treatment residue generated from the wastewater treatment systems at these facilities applies only to the wastewater and solids treatment systems as they presently exist as described in the delisting petition. The exclusion does not apply to the proposed process additions described in the petition as recovery including crystallization, electrolytic metals recovery, evaporative recovery, and ion exchange.</ENT> </ROW> <ROW> <ENT I="01">EPA's Mobile Incineration System</ENT> <ENT>Denney Farm Site; McDowell, MO</ENT> <ENT>Process wastewater, rotary kiln ash, CHEAF media, and other solids (except spent activated carbon) (EPA Hazardous Waste Nos. F020, F022, F023, F026, F027, and F028) generated during the field demonstration of EPA's Mobile Incinerator at the Denney Farm Site in McDowell, Missouri, after July 25, 1985, so long as: (1) The incinerator is functioning properly; (2) a grab sample is taken from each tank of wastewater generated and the EP leachate values do not exceed 0.03 ppm for mercury, 0.14 ppm for selenium, and 0.68 ppm for chromium; and (3) a grab sample is taken from each drum of soil or ash generated and a core sample is collected from each CHEAF roll generated and the EP leachate values of daily composites do not exceed 0.044 ppm in ash or CHEAF media for mercury or 0.22 ppm in ash or CHEAF media for selenium.</ENT> </ROW> <ROW> <ENT I="01">Falconer Glass Indust., Inc.</ENT> <ENT>Falconer, NY</ENT> <ENT>Wastewater treatment sludges from the filter press and magnetic drum separator (EPA Hazardous Waste No. F006) generated from electroplating operations after July 16, 1986.</ENT> </ROW> <ROW> <ENT I="01">Florida Production Engineering Company</ENT> <ENT>Daytona Beach, Florida</ENT> <ENT>This is a one-time exclusion. Wastewater treatment sludges (EPA Hazardous Waste No. F006) generated from electroplating operations and contained in four on-site trenches on January 23, 1987.</ENT> </ROW> <ROW> <ENT I="01">Ford Motor Company, Dearborn Truck Assembly Plant</ENT> <ENT>Dearborn, Michigan</ENT> <ENT>Wastewater treatment plant sludge, F019, that is generated by Ford Motor Company at the Dearborn Truck Asembly Plant at a maximum annual rate of 2,000 cubic yards per year. The sludge must be disposed of in a lined landfill with leachate collection which is licensed, permitted, or otherwise authorized to accept the delisted wastewater treatment sludge in accordance with 40 CFR part 258. The exclusion becomes effective as of April 25, 2005.</ENT> </ROW> <ROW> <PRTPAGE P="139"/> <ENT I="22"/> <ENT O="xl"/> <ENT>1. <E T="03">Delisting Levels:</E> (A) The concentrations in a TCLP extract of the waste measured in any sample may not exceed the following levels (mg/L): antimony—0.7; arsenic—0.3; barium—100; cadmium—0.5; chromium—5; lead—5; nickel—90; selenium—1; thallium—0.3; zinc—900; p-cresol—11; di-n-octyl phthlate—0.11; formaldehyde—80; and pentachlorophenol—0.009. (B) The total concentration measured in any sample may not exceed the following levels (mg/kg): mercury—9; and formaldehyde—700.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>2. <E T="03">Quarterly Verification Testing:</E> To verify that the waste does not exceed the specified delisting levels, Dearborn Truck Assembly Plant must collect and analyze one representative sample of the waste on a quarterly basis.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>3. <E T="03">Changes in Operating Conditions:</E> Dearborn Truck Assembly Plant must notify the EPA in writing if the manufacturing process, the chemicals used in the manufacturing process, the treatment process, or the chemicals used in the treatment process change significantly. Dearborn Truck Assembly Plant must handle wastes generated after the process change as hazardous until it has demonstrated that the wastes continue to meet the delisting levels and that no new hazardous constituents listed in appendix VIII of part 261 have been introduced and it has received written approval from EPA.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>4. <E T="03">Data Submittals:</E> Dearborn Truck Assembly Plant [Redln Off] must submit the data obtained through verification testing or as required by other conditions of this rule to both U.S. EPA Region 5, Waste Management Branch (DW-8J), 77 W. Jackson Blvd., Chicago, IL 60604 and MDEQ, Waste Management Division, Hazardous Waste Program Section, at P.O. Box 30241, Lansing, Michigan 48909. The quarterly verification data and certification of proper disposal must be submitted annually upon the anniversary of the effective date of this exclusion. Dearborn Truck Assembly Plant must compile, summarize and maintain on site for a minimum of five years records of operating conditions and analytical data. Dearborn Truck Assembly Plant must make these records available for inspection. All data must be accompanied by a signed copy of the certification statement in 40 CFR 260.22(i)(12).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>5. <E T="03">Reopener Language</E>—(a) If, anytime after disposal of the delisted waste, Dearborn Truck Assembly Plant possesses or is otherwise made aware of any data (including but not limited to leachate data or groundwater monitoring data) relevant to the delisted waste indicating that any constituent is at a level in the leachate higher than the specified delisting level, or is in the groundwater at a concentration higher than the maximum allowable groundwater concentration in paragraph (e), then Dearborn Truck Assembly Plant must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify Dearborn Truck Assembly Plant in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing Dearborn Truck Assembly Plant with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. Dearborn Truck Assembly Plant shall have 30 days from the date of the Regional Administrator's notice to present the information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(d) If after 30 days the Dearborn Truck Assembly Plant presents no further information, the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(e) Maximum Allowable Groundwater Concentrations (µg/L): antimony—6; arsenic—5; barium—2,000; cadmium—5; chromium—100; lead—15; nickel—800; selenium—50; thallium—2; tin—20,000; zinc—11,000; p-Cresol—200; Di-n-octyl phthlate—1.3; Formaldehyde—1,400; and Pentachlorophenol—0.15.</ENT> </ROW> <ROW> <ENT I="01">Ford Motor Company, Kansas City Assembly Plant</ENT> <ENT>Claycomo, Missouri</ENT> <ENT>Wastewater treatment sludge, F019, that is generated at the Ford Motor Company (Ford) Kansas City Assembly Plant (KCAP) at a maximum annual rate of 2,000 cubic yards per year. The sludge must be disposed of in a lined landfill with leachate collection, which is licensed, permitted, or otherwise authorized to accept the delisted wastewater treatment sludge in accordance with 40 CFR part 258. The exclusion becomes effective as of June 6, 2007.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>1. Delisting Levels: (a) The concentrations in a TCLP extract of the waste measured in any sample may not equal or exceed the following levels (mg/L): barium—100; chromium—5; mercury—0.155; nickel—90; thallium—0.282; zinc—898; cyanides—11.5; ethyl benzene—42.6; toluene—60.8; total xylenes—18.9; bis(2-ethylhexyl) phthalate—0.365; p-cresol—11.4; 2,4-dinitrotoluene—0.13; formaldehyde—343; and napthalene—.728;</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) The total concentrations measured in any sample may not exceed the following levels (mg/kg): chromium 760000; mercury—10.4; thallium—116000; 2,4-dinitrotoluene—100000; and formaldehyde—6880.</ENT> </ROW> <ROW> <PRTPAGE P="140"/> <ENT I="22"/> <ENT O="xl"/> <ENT>2. Quarterly Verification Testing: To verify that the waste does not exceed the specified delisting levels, Ford must collect and analyze one representative sample of KCAP's sludge on a quarterly basis.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>3. Changes in Operating Conditions: Ford must notify the EPA in writing if the manufacturing process, the chemicals used in the manufacturing process, the treatment process, or the chemicals used in the treatment process at KCAP significantly change. Ford must handle wastes generated at KCAP after the process change as hazardous until it has demonstrated that the waste continues to meet the delisting levels and that no new hazardous constituents listed in appendix VIII of part 261 have been introduced and Ford has received written approval from EPA for the changes.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>4. Data Submittals: Ford must submit the data obtained through verification testing at KCAP or as required by other conditions of this rule to EPA Region 7, Air, RCRA and Toxics Division, 901 N. 5th, Kansas City, Kansas 66101. The quarterly verification data and certification of proper disposal must be submitted annually upon the anniversary of the effective date of this exclusion. Ford must compile, summarize, and maintain at KCAP records of operating conditions and analytical data for a minimum of five years. Ford must make these records available for inspection. All data must be accompanied by a signed copy of the certification statement in 40 CFR 260.22(i)(12).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>5. Reopener Language—(a) If, anytime after disposal of the delisted waste, Ford possesses or is otherwise made aware of any data (including but not limited to leachate data or groundwater monitoring data) relevant to the delisted waste at KCAP indicating that any constituent is at a level in the leachate higher than the specified delisting level, or is in the groundwater at a concentration higher than the maximum allowable groundwater concentration in paragraph (e), then Ford must report such data in writing to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify Ford in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing Ford with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. Ford shall have 30 days from the date of the Regional Administrator's notice to present the information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(d) If after 30 days Ford presents no further information, the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="01">Ford Motor Company, Michigan Truck Plant and Wayne Integrated Stamping and Assembly Plant.</ENT> <ENT>Wayne, Michigan</ENT> <ENT>Waste water treatment plant sludge, F019, that is generated by Ford Motor Company at the Wayne Integrated Stamping and Assembly Plant from wastewaters from both the Wayne Integrated Stamping and Assembly Plant and the Michigan Truck Plant, Wayne, Michigan at a maximum annual rate of 2,000 cubic yards per year. The sludge must be disposed of in a lined landfill with leachate collection, which is licensed, permitted, or otherwise authorized to accept the delisted wastewater treatment sludge in accordance with 40 CFR part 258. The exclusion becomes effective as of July 30, 2003.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>1. Delisting Levels: (A) The TCLP concentrations measured in any sample may not exceed the following levels (mg/L): Antimony—0.659; Arsenic—0.3; Cadmium—0.48; Chromium—4.95; Lead—5; Nickel—90.5; Selenium—1; Thallium—0.282; Tin—721; Zinc—898; p-Cresol—11.4; and Formaldehyde—84.2. (B) The total concentrations measured in any sample may not exceed the following levels (mg/kg): Mercury—8.92; and Formaldehyde—689. (C) The sum of the ratios of the TCLP concentrations to the delisting levels for nickel and thallium and for nickel and cadmium shall not exceed 1.0.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>2. Quarterly Verification Testing: To verify that the waste does not exceed the specified delisting levels, the facility must collect and analyze one waste sample on a quarterly basis.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>3. Changes in Operating Conditions: The facility must notify the EPA in writing if the manufacturing process, the chemicals used in the manufacturing process, the treatment process, or the chemicals used in the treatment process significantly change. The facility must handle wastes generated after the process change as hazardous until it has demonstrated that the wastes continue to meet the delisting levels and that no new hazardous constituents listed in appendix VIII of part 261 have been introduced and it has received written approval from EPA.</ENT> </ROW> <ROW> <PRTPAGE P="141"/> <ENT I="22"/> <ENT O="xl"/> <ENT>4. Data Submittals: The facility must submit the data obtained through verification testing or as required by other conditions of this rule to both U.S. EPA Region 5, Waste Management Branch (DW-8J), 77 W. Jackson Blvd., Chicago, IL 60604 and MDEQ, Waste Management Division, Hazardous Waste Program Section, at P.O. Box 30241, Lansing, Michigan 48909. The quarterly verification data and certification of proper disposal must be submitted annually upon the anniversary of the effective date of this exclusion. The facility must compile, summarize, and maintain on site for a minimum of five years records of operating conditions and analytical data. The facility must make these records available for inspection. All data must be accompanied by a signed copy of the certification statement in 40 CFR 260.22(i)(12).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>5. Reopener Language—(a) If, anytime after disposal of the delisted waste, the facility possesses or is otherwise made aware of any data (including but not limited to leachate data or groundwater monitoring data) relevant to the delisted waste indicating that any constituent is at a level in the leachate higher than the specified delisting level, or is in the groundwater at a concentration higher than the maximum allowable groundwater concentration in paragraph (e), then the facility must report such data, in writing, to the Regional Administrator within 10 days of first possessing or being made aware of that data.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi2"> (b) Based on the information described in paragraph (a) and any other information received from any source, the Regional Administrator will make a preliminary determination as to whether the reported information requires Agency action to protect human health or the environment. Further action may include suspending, or revoking the exclusion, or other appropriate response necessary to protect human health and the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi2"> (c) If the Regional Administrator determines that the reported information does require Agency action, the Regional Administrator will notify the facility in writing of the actions the Regional Administrator believes are necessary to protect human health and the environment. The notice shall include a statement of the proposed action and a statement providing the facility with an opportunity to present information as to why the proposed Agency action is not necessary or to suggest an alternative action. The facility shall have 30 days from the date of the Regional Administrator's notice to present the information.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi2"> (d) If after 30 days the facility presents no further information, the Regional Administrator will issue a final written determination describing the Agency actions that are necessary to protect human health or the environment. Any required action described in the Regional Administrator's determination shall become effective immediately, unless the Regional Administrator provides otherwise.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi2"> (e) Maximum Allowable Groundwater Concentrations (ug/L): Antimony—6; Arsenic—4.87; Cadmium—5; Chromium—100; Lead—15; Nickel—750; Selenium—50; Thallium—2; Tin—22,500; Zinc—11,300; p-Cresol—188; and Formaldehyde—1,380.</ENT> </ROW> <ROW> <ENT I="22">Ford Motor Company, Wixom Assembly Plant.</ENT> <ENT>Wixom, Michigan</ENT> <ENT>Waste water treatment plant sludge, F019, that is generated by Ford Motor Company at the Wixom Assembly Plant, Wixom, Michigan at a maximum annual rate of 2,000 cubic yards per year. The sludge must be disposed of in a lined landfill with leachate collection, which is licensed, permitted, or otherwise authorized to accept the delisted wastewater treatment sludge in accordance with 40 CFR Part 258. The exclusion becomes effective as of July 30, 2003. The conditions in paragraphs (2) through (5) for Ford Motor Company—Michigan Truck Plant and Wayne Integrated Stamping Plant—Wayne, Michigan also apply.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>Delisting Levels: (A) The TCLP concentrations measured in any sample may not exceed the following levels (mg/L): Antimony—0.659; Arsenic—0.3; Cadmium—0.48; Chromium—4.95; Lead—5; Nickel—90.5; Selenium—1; Thallium—0.282; Tin—721; Zinc—898; p-Cresol—11.4; and Formaldehyde—84.2. (B) The total concentrations measured in any sample may not exceed the following levels (mg/kg): Mercury—8.92; and Formaldehyde—689. (C) The sum of the ratios of the TCLP concentrations to the delisting levels for nickel and thallium and for nickel and cadmium shall not exceed 1.0.</ENT> </ROW> <ROW> <ENT I="01">GE's Former RCA del Caribe</ENT> <ENT>Barceloneta, PR</ENT> <ENT>Wastewater treatment plant (WWTP) sludges from chemical etching operation (EPA Hazardous Waste No. F006) and contaminated soil mixed with sludge. This is a one-time exclusion for a range of 5,000 to 15,000 cubic yards of WWTP sludge on condition of disposal in a Subtitle D landfill. This exclusion was published on February 1, 2007. 1. Reopener Language—(a) If, anytime after disposal of the delisted waste, GE discovers that any condition or assumption related to the characterization of the excluded waste which was used in the evaluation of the petition or that was predicted through modeling is not as reported in the petition, then GE must report any information relevant to that condition or assumption, in writing, to the Director of the Division of Environmental Planning and Protection in Region 2 within 10 days of first of discovering that information. (b) Upon receiving information described in paragraph (a) of this section, regardless of its source, the Director will determine whether the reported condition requires further action. Further action may include repealing the exclusion, modifying the exclusion, or other appropriate action deemed necessary to protect human health or the environment.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>2. Notifications—GE must provide a one-time written notification to any State or Commonwealth Regulatory Agency in any State or Commonwealth to which or through which the waste described above will be transported for disposal at least 60 days prior to the commencement of such activities. Failure to provide such a notification will result in a violation of the waste exclusion and a possible revocation of the decision.</ENT> </ROW> <ROW> <PRTPAGE P="142"/> <ENT I="01">General Electric Company</ENT> <ENT>Shreveport Louisiana</ENT> <ENT>Wastewater treatment sludges (EPA Hazardous Waste No. F006) generated from electroplating operations and contained in four on-site treatment ponds on August 12, 1987.</ENT> </ROW> <ROW> <ENT I="01">General Motors</ENT> <ENT>Arlington, TX</ENT> <ENT>Wastewater Treatment Sludge (WWTP) (EPA Hazardous Waste No. F019) generated at a maximum annual rate of 3,000 cubic yards per calendar year after January 3, 2007 and disposed in a Subtitle D landfill.<LI>For the exclusion to be valid, GM-Arlington must implement a verification testing program that meets the following paragraphs:</LI> </ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(1) <E T="03">Delisting Levels:</E> All leachable concentrations for those constituents must not exceed the following levels (mg/l for TCLP).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(i) Inorganic Constituents: Barium-100; Cadmium-0.36; Chromium-5 (3.71) ; Cobalt-18.02; Lead-5; Nickel-67.8; Silver-5; Tin-540; Zinc-673.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(ii) Organic Constituents: Acetone-171; Ethylbenzene-31.9; N-Butyl Alcohol-171; Toluene-45.6; Bis(2-Ethylhexyl) Phthalate-0.27; p-Cresol-8.55; Naphthalene-3.11.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(2) <E T="03">Waste Management:</E> (A) GM-Arlington must manage as hazardous all WWTP sludge generated, until it has completed initial verification testing described in paragraph (3)(A) and (B), as appropriate, and valid analyses show that paragraph(1) is satisfied.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(B) Levels of constituents measured in the samples of the WWTP sludge that do not exceed the levels set forth in paragraph (1) are non-hazardous. GM-Arlington can manage and dispose of the non-hazardous WWTP sludge according to all applicable solid waste regulations.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(C) If constituent levels in a sample exceed any of the delisting levels set in paragraph (1), GM-Arlington can collect one additional sample and perform expedited analyses to verify if the constituent exceeds the delisting level. If this sample confirms the exceedance, GM-Arlington must, from that point forward, treat the waste as hazardous until it is demonstrated that the waste again meets the levels in paragraph (1). GM-Arlington must manage and dispose of the waste generated under Subtitle C of RCRA from the time it becomes aware of any exceedance.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(D) Upon completion of the Verification Testing described in paragraph 3(A) and (B), as appropriate, and the transmittal of the results to EPA, and if the testing results meet the requirements of paragraph (1), GM-Arlington may proceed to manage its WWTP sludge as non-hazardous waste. If subsequent Verification Testing indicates an exceedance of the Delisting Levels in paragraph (1), GM-Arlington must manage the WWTP sludge as a hazardous waste until two consecutive quarterly testing samples show levels below the Delisting Levels in paragraph (1).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(3) <E T="03">Verification Testing Requirements:</E> GM-Arlington must perform sample collection and analyses, including quality control procedures, according to appropriate methods such as those found in SW-846 or other reliable sources (with the exception of analyses requiring the use of SW-846 methods incorporated by reference in 40 CFR 260.11, which must be used without substitution) for all constituents listed in paragraph (1). If EPA judges the process to be effective under the operating conditions used during the initial verification testing, GM-Arlington may replace the testing required in paragraph (3)(A) with the testing required in paragraph (3)(B). GM-Arlington Plant must continue to test as specified in paragraph (3)(A) until and unless notified by EPA in writing that testing in paragraph (3)(A) may be replaced by paragraph (3)(B).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(A) <E T="03">Initial Verification Testing:</E> After EPA grants the final exclusion, GM-Arlington must do the following:</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(i) Within 30 days of this exclusion becoming final, collect two (2) samples, before disposal, of the WWTP sludge.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(ii) The samples are to be analyzed and compared against the Delisting Levels in paragraph (1).</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(iii) Within 60 days of the exclusion becoming final, GM-Arlington must report to EPA the initial verification analytical test data for the WWTP sludge, including analytical quality control information for the first thirty (30) days of operation after this exclusion becomes final.<LI>If levels of constituents measured in these samples of the WWTP sludge do not exceed the levels set forth in paragraph (1), GM-Arlington can manage and dispose of the WWTP sludge according to all applicable solid waste regulations.</LI> </ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(B) <E T="03">Subsequent Verification Testing:</E> Following written notification by EPA, GM-Arlington may substitute the testing conditions in paragraph (3)(B) for paragraph (3)(A). GM-Arlington must continue to monitor operating conditions, and analyze two representative samples of the WWTP sludge for the next three quarters of operation during the first year of waste generation. The samples must represent the waste generated during the quarter. Quarterly reports are due to EPA, thirty days after the samples are taken.<LI>After the first year of analytical sampling, verification sampling can be performed on a single annual sample of the WWTP sludge. The results are to be compared to the delisting levels in paragraph (1).</LI> </ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT>(C) <E T="03">Termination of Testing:</E> </ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="oi1">(i) After the first year of quarterly testing, if