[Title 40 CFR 146.69]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter D - WATER PROGRAMS (CONTINUED)]
[Part 146 - UNDERGROUND INJECTION CONTROL PROGRAM: CRITERIA AND]
[Subpart G - Criteria and Standards Applicable to Class I Hazardous Waste]
[Sec. 146.69 - Reporting requirements.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT222009-07-012009-07-01false146.69Sec. 146.69PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)WATER PROGRAMS (CONTINUED)UNDERGROUND INJECTION CONTROL PROGRAM: CRITERIA ANDCriteria and Standards Applicable to Class I Hazardous Waste
Sec. 146.69  Reporting requirements.

    Reporting requirements shall, at a minimum, include:
    (a) Quarterly reports to the Director containing:
    (1) The maximum injection pressure;
    (2) A description of any event that exceeds operating parameters for 
annulus pressure or injection pressure as specified in the permit;
    (3) A description of any event which triggers an alarm or shutdown 
device required pursuant to Sec. 146.67(f) and the response taken;
    (4) The total volume of fluid injected;
    (5) Any change in the annular fluid volume;

[[Page 802]]

    (6) The physical, chemical and other relevant characteristics of 
injected fluids; and
    (7) The results of monitoring prescribed under Sec. 146.68.
    (b) Reporting, within 30 days or with the next quarterly report 
whichever comes later, the results of:
    (1) Periodic tests of mechanical integrity;
    (2) Any other test of the injection well conducted by the permittee 
if required by the Director; and
    (3) Any well workover.