[Title 40 CFR 60.122]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart L - Standards of Performance for Secondary Lead Smelters]
[Sec. 60.122 - Standard for particulate matter.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.122Sec. 60.122PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Secondary Lead Smelters
Sec. 60.122  Standard for particulate matter.

    (a) On and after the date on which the performance test required to 
be conducted by Sec. 60.8 is completed, no owner or operator subject to 
the provisions of this subpart shall discharge or cause the discharge 
into the atmosphere from a blast (cupola) or reverberatory furnace any 
gases which:
    (1) Contain particulate matter in excess of 50 mg/dscm (0.022 gr/
dscf).
    (2) Exhibit 20 percent opacity or greater.
    (b) On and after the date on which the performance test required to 
be conducted by Sec. 60.8 is completed, no

[[Page 370]]

owner or operator subject to the provisions of this subpart shall 
discharge or cause the discharge into the atmosphere from any pot 
furnace any gases which exhibit 10 percent opacity or greater.

[39 FR 9317, Mar. 8, 1974, as amended at 40 FR 46259, Oct. 6, 1975]