[Title 40 CFR 60.123]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart L - Standards of Performance for Secondary Lead Smelters]
[Sec. 60.123 - Test methods and procedures.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.123Sec. 60.123PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Secondary Lead Smelters
Sec. 60.123  Test methods and procedures.

    (a) In conducting the performance tests required in Sec. 60.8, the 
owner or operator shall use as reference methods and procedures the test 
methods in appendix A of this part or other methods and procedures as 
specified in this section, except as provided in Sec. 60.8(b).
    (b) The owner or operator shall determine compliance with the 
particulate matter standards in Sec. 60.122 as follows:
    (1) Method 5 shall be used to determine the particulate matter 
concentration during representative periods of furnace operation, 
including charging and tapping. The sampling time and sample volume for 
each run shall be at least 60 minutes and 0.90 dscm (31.8 dscf).
    (2) Method 9 and the procedures in Sec. 60.11 shall be used to 
determine opacity.

[54 FR 6667, Feb. 14, 1989]