What schedule must I follow for the stack testing?

[Title 40 CFR 60.1295]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Aaaa - Standards of Performance for Small Municipal Waste]
[Sec. 60.1295 - What schedule must I follow for the stack testing?]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseWhat schedule must I follow for the stack testing?60.1295Sec. 60.1295PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Small Municipal Waste
Sec. 60.1295  What schedule must I follow for the stack testing?

    (a) Conduct initial stack tests for the pollutants listed in Sec. 
60.1285 within 60 days after your municipal waste combustion unit 
reaches the maximum load level at which it will operate, but no later 
than 180 days after its initial startup.
    (b) Conduct annual stack tests for the same pollutants after the 
initial stack test. Conduct each annual stack test no later than 13 
months after the previous stack test.