[Title 40 CFR 60.133]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart M - Standards of Performance for Secondary Brass and Bronze]
[Sec. 60.133 - Test methods and procedures.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.133Sec. 60.133PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Secondary Brass and Bronze
Sec. 60.133  Test methods and procedures.

    (a) In conducting performance tests required in Sec. 60.8, the 
owner or operator shall use as reference methods and procedures the test 
methods in appendix A

[[Page 371]]

of this part or other methods and procedures as specified in this 
section, except as provided in Sec. 60.8(b).
    (b) The owner or operator shall determine compliance with the 
particulate matter standards in Sec. 60.132 as follows:
    (1) Method 5 shall be used to determine the particulate matter 
concentration during representative periods of charging and refining, 
but not during pouring of part of the production cycle. The sampling 
time and sample volume for each run shall be at least 120 minutes and 
1.80 dscm (63.6 dscf).
    (2) Method 9 and the procedures in Sec. 60.11 shall be used to 
determine opacity.

[54 FR 6667, Feb. 14, 1989, as amended at 65 FR 61756, Oct. 17, 2000]