[Title 40 CFR 60.1465]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Aaaa - Standards of Performance for Small Municipal Waste]
[Sec. 60.1465 - What definitions must I know?]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseWhat definitions must I know?60.1465Sec. 60.1465PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Small Municipal Waste
Sec. 60.1465  What definitions must I know?

    Terms used but not defined in this section are defined in the CAA 
and in subparts A and B of this part.
    Administrator means the Administrator of the U.S. Environmental 
Protection Agency or his/her authorized representative or the 
Administrator of a State Air Pollution Control Agency.
    Air curtain incinerator means an incinerator that operates by 
forcefully projecting a curtain of air across an open chamber or pit in 
which combustion occurs. Incinerators of that type can be constructed 
above or below ground and with or without refractory walls and floor.
    Batch municipal waste combustion unit means a municipal waste 
combustion unit designed so it cannot combust municipal solid waste 
continuously 24 hours per day because the design does not allow waste to 
be fed to the unit or ash to be removed during combustion.
    Calendar quarter means three consecutive months (nonoverlapping) 
beginning on: January 1, April 1, July 1, or October 1.
    Calendar year means 365 (or 366 consecutive days for leap years) 
consecutive days starting on January 1 and ending on December 31.
    Chief facility operator means the person in direct charge and 
control of the operation of a municipal waste combustion unit. That 
person is responsible for daily onsite supervision, technical direction, 
management, and overall performance of the municipal waste combustion 
unit.
    Class I units mean small municipal waste combustion units subject to 
this subpart that are located at municipal waste combustion plants with 
an aggregate plant combustion capacity greater than 250 tons per day of 
municipal solid waste. See the definition in this section of ``municipal 
waste combustion plant capacity'' for specification of which units at a 
plant site are included in the aggregate capacity calculation.
    Class II units mean small municipal waste combustion units subject 
to this subpart that are located at municipal waste combustion plants 
with an aggregate plant combustion capacity less than or equal to 250 
tons per day of municipal solid waste. See the definition in this 
section of ``municipal waste combustion plant capacity'' for 
specification of which units at a plant site are included in the 
aggregate capacity calculation.
    Clean wood means untreated wood or untreated wood products including 
clean untreated lumber, tree stumps (whole or chipped), and tree limbs 
(whole or chipped). Clean wood does not include two items:
    (1) ``Yard waste,'' which is defined elsewhere in this section.
    (2) Construction, renovation, or demolition wastes (for example, 
railroad ties and telephone poles) that are exempt from the definition 
of ``municipal solid waste'' in this section.
    Co-fired combustion unit means a unit that combusts municipal solid 
waste with nonmunicipal solid waste fuel (for example, coal, industrial 
process waste). To be considered a co-fired combustion unit, the unit 
must be subject to a federally enforceable permit that limits it to 
combusting a fuel feed stream which is 30 percent or less (by weight) 
municipal solid waste as measured each calendar quarter.
    Continuous burning means the continuous, semicontinuous, or batch 
feeding of municipal solid waste to dispose of the waste, produce 
energy, or provide heat to the combustion system in preparation for 
waste disposal or energy production. Continuous burning does not mean 
the use of municipal solid waste solely to thermally protect the grate 
or hearth during the startup period when municipal solid waste is not 
fed to the grate or hearth.
    Continuous emission monitoring system means a monitoring system that 
continuously measures the emissions of a pollutant from a municipal 
waste combustion unit.
    Dioxins/furans mean tetra- through octachlorinated dibenzo-p-dioxins 
and dibenzofurans.
    Eight-hour block average means the average of all hourly emission 
concentrations or parameter levels when the municipal waste combustion 
unit operates and combusts municipal solid waste measured over any of 
three 8-hour periods of time:

[[Page 795]]

    (1) 12:00 midnight to 8:00 a.m.
    (2) 8:00 a.m. to 4:00 p.m.
    (3) 4:00 p.m. to 12:00 midnight.
    Federally enforceable means all limits and conditions the 
Administrator can enforce (including the requirements of 40 CFR parts 
60, 61, and 63), requirements in a State's implementation plan, and any 
permit requirements established under 40 CFR 52.21 or under 40 CFR 51.18 
and 40 CFR 51.24.
    First calendar half means the period that starts on January 1 and 
ends on June 30 in any year.
    Fluidized bed combustion unit means a unit where municipal waste is 
combusted in a fluidized bed of material. The fluidized bed material may 
remain in the primary combustion zone or may be carried out of the 
primary combustion zone and returned through a recirculation loop.
    Four-hour block average or 4-hour block average means the average of 
all hourly emission concentrations or parameter levels when the 
municipal waste combustion unit operates and combusts municipal solid 
waste measured over any of six 4-hour periods:
    (1) 12:00 midnight to 4:00 a.m.
    (2) 4:00 a.m. to 8:00 a.m.
    (3) 8:00 a.m. to 12:00 noon.
    (4) 12:00 noon to 4:00 p.m.
    (5) 4:00 p.m. to 8:00 p.m.
    (6) 8:00 p.m. to 12:00 midnight.
    Mass burn refractory municipal waste combustion unit means a field-
erected municipal waste combustion unit that combusts municipal solid 
waste in a refractory wall furnace. Unless otherwise specified, that 
includes municipal waste combustion units with a cylindrical rotary 
refractory wall furnace.
    Mass burn rotary waterwall municipal waste combustion unit means a 
field-erected municipal waste combustion unit that combusts municipal 
solid waste in a cylindrical rotary waterwall furnace.
    Mass burn waterwall municipal waste combustion unit means a field-
erected municipal waste combustion unit that combusts municipal solid 
waste in a waterwall furnace.
    Materials separation plan means a plan that identifies a goal and an 
approach for separating certain components of municipal solid waste for 
a given service area in order to make the separated materials available 
for recycling. A materials separation plan may include three items:
    (1) Elements such as dropoff facilities, buy-back or deposit-return 
incentives, curbside pickup programs, or centralized mechanical 
separation systems.
    (2) Different goals or approaches for different subareas in the 
service area.
    (3) No materials separation activities for certain subareas or, if 
warranted, the entire service area.
    Maximum demonstrated load of a municipal waste combustion unit means 
the highest 4-hour block arithmetic average municipal waste combustion 
unit load achieved during 4 consecutive hours in the course of the most 
recent dioxins/furans stack test that demonstrates compliance with the 
applicable emission limit for dioxins/furans specified in this subpart.
    Maximum demonstrated temperature of the particulate matter control 
device means the highest 4-hour block arithmetic average flue gas 
temperature measured at the inlet of the particulate matter control 
device during 4 consecutive hours in the course of the most recent stack 
test for dioxins/furans emissions that demonstrates compliance with the 
limits specified in this subpart.
    Medical/infectious waste means any waste meeting the definition of 
``medical/infectious waste'' in Sec. 60.51c of subpart E, of this part.
    Mixed fuel-fired (pulverized coal/refuse-derived fuel) combustion 
unit means a combustion unit that combusts coal and refuse-derived fuel 
simultaneously, in which pulverized coal is introduced into an air 
stream that carries the coal to the combustion chamber of the unit where 
it is combusted in suspension. That includes both conventional 
pulverized coal and micropulverized coal.
    Modification or modified municipal waste combustion unit means a 
municipal waste combustion unit you have changed after June 6, 2001 and 
that meets one of two criteria:
    (1) The cumulative cost of the changes over the life of the unit 
exceeds 50 percent of the original cost of building and installing the 
unit (not including the cost of land) updated to current costs.

[[Page 796]]

    (2) Any physical change in the municipal waste combustion unit or 
change in the method of operating it that increases the emission level 
of any air pollutant for which new source performance standards have 
been established under section 129 or section 111 of the CAA. Increases 
in the emission level of any air pollutant are determined when the 
municipal waste combustion unit operates at 100 percent of its physical 
load capability and are measured downstream of all air pollution control 
devices. Load restrictions based on permits or other nonphysical 
operational restrictions cannot be considered in the determination.
    Modular excess-air municipal waste combustion unit means a municipal 
waste combustion unit that combusts municipal solid waste, is not field-
erected, and has multiple combustion chambers, all of which are designed 
to operate at conditions with combustion air amounts in excess of 
theoretical air requirements.
    Modular starved-air municipal waste combustion unit means a 
municipal waste combustion unit that combusts municipal solid waste, is 
not field-erected, and has multiple combustion chambers in which the 
primary combustion chamber is designed to operate at substoichiometric 
conditions.
    Municipal solid waste or municipal-type solid waste means household, 
commercial/retail, or institutional waste. Household waste includes 
material discarded by residential dwellings, hotels, motels, and other 
similar permanent or temporary housing. Commercial/retail waste includes 
material discarded by stores, offices, restaurants, warehouses, 
nonmanufacturing activities at industrial facilities, and other similar 
establishments or facilities. Institutional waste includes materials 
discarded by schools, by hospitals (nonmedical), by nonmanufacturing 
activities at prisons and government facilities, and other similar 
establishments or facilities. Household, commercial/retail, and 
institutional waste does include yard waste and refuse-derived fuel. 
Household, commercial/retail, and institutional waste does not include 
used oil; sewage sludge; wood pallets; construction, renovation, and 
demolition wastes (which include railroad ties and telephone poles); 
clean wood; industrial process or manufacturing wastes; medical waste; 
or motor vehicles (including motor vehicle parts or vehicle fluff).
    Municipal waste combustion plant means one or more municipal waste 
combustion units at the same location as specified under Applicability 
(Sec. 60.1015(a)and (b)).
    Municipal waste combustion plant capacity means the aggregate 
municipal waste combustion capacity of all municipal waste combustion 
units at the plant that are subject to subparts Ea or Eb of this part, 
or this subpart.
    Municipal waste combustion unit means any setting or equipment that 
combusts solid, liquid, or gasified municipal solid waste including, but 
not limited to, field-erected combustion units (with or without heat 
recovery), modular combustion units (starved-air or excess-air), boilers 
(for example, steam generating units), furnaces (whether suspension-
fired, grate-fired, mass-fired, air curtain incinerators, or fluidized 
bed-fired), and pyrolysis/combustion units. Two criteria further define 
municipal waste combustion units:
    (1) Municipal waste combustion units do not include pyrolysis or 
combustion units located at a plastics or rubber recycling unit as 
specified under Applicability (Sec. 60.1020(h) and (i)). Municipal 
waste combustion units also do not include cement kilns that combust 
municipal solid waste as specified under Applicability (Sec. 
60.1020(j)). Municipal waste combustion units also do not include 
internal combustion engines, gas turbines, or other combustion devices 
that combust landfill gases collected by landfill gas collection 
systems.
    (2) The boundaries of a municipal waste combustion unit are defined 
as follows. The municipal waste combustion unit includes, but is not 
limited to, the municipal solid waste fuel feed system, grate system, 
flue gas system, bottom ash system, and the combustion unit water 
system. The municipal waste combustion unit does not include air 
pollution control equipment, the stack, water treatment equipment, or 
the turbine-generator set. The municipal waste combustion unit boundary 
starts at the municipal solid waste pit

[[Page 797]]

or hopper and extends through three areas:
    (i) The combustion unit flue gas system, which ends immediately 
after the heat recovery equipment or, if there is no heat recovery 
equipment, immediately after the combustion chamber.
    (ii) The combustion unit bottom ash system, which ends at the truck 
loading station or similar equipment that transfers the ash to final 
disposal. It includes all ash handling systems connected to the bottom 
ash handling system.
    (iii) The combustion unit water system, which starts at the feed 
water pump and ends at the piping that exits the steam drum or 
superheater.
    Particulate matter means total particulate matter emitted from 
municipal waste combustion units as measured using EPA Reference Method 
5 in appendix A of this part and the procedures specified in Sec. 
60.1300.
    Plastics or rubber recycling unit means an integrated processing 
unit for which plastics, rubber, or rubber tires are the only feed 
materials (incidental contaminants may be in the feed materials). The 
feed materials are processed and marketed to become input feed stock for 
chemical plants or petroleum refineries. The following three criteria 
further define a plastics or rubber recycling unit:
    (1) Each calendar quarter, the combined weight of the feed stock 
that a plastics or rubber recycling unit produces must be more than 70 
percent of the combined weight of the plastics, rubber, and rubber tires 
that recycling unit processes.
    (2) The plastics, rubber, or rubber tires fed to the recycling unit 
may originate from separating or diverting plastics, rubber, or rubber 
tires from municipal or industrial solid waste. The feed materials may 
include manufacturing scraps, trimmings, and off-specification plastics, 
rubber, and rubber tire discards.
    (3) The plastics, rubber, and rubber tires fed to the recycling unit 
may contain incidental contaminants (for example, paper labels on 
plastic bottles or metal rings on plastic bottle caps).
    Potential hydrogen chloride emissions means the level of emissions 
from a municipal waste combustion unit that would occur from combusting 
municipal solid waste without emission controls for acid gases.
    Potential mercury emissions means the level of emissions from a 
municipal waste combustion unit that would occur from combusting 
municipal solid waste without controls for mercury emissions.
    Potential sulfur dioxide emissions means the level of emissions from 
a municipal waste combustion unit that would occur from combusting 
municipal solid waste without emission controls for acid gases.
    Pyrolysis/combustion unit means a unit that produces gases, liquids, 
or solids by heating municipal solid waste. The gases, liquids, or 
solids produced are combusted and the emissions vented to the 
atmosphere.
    Reconstruction means rebuilding a municipal waste combustion unit 
and meeting two criteria:
    (1) The reconstruction begins after June 6, 2001.
    (2) The cumulative cost of the construction over the life of the 
unit exceeds 50 percent of the original cost of building and installing 
the municipal waste combustion unit (not including land) updated to 
current costs (current dollars). To determine what systems are within 
the boundary of the municipal waste combustion unit used to calculate 
those costs, see the definition in this section of ``municipal waste 
combustion unit.''
    Refractory unit or refractory wall furnace means a municipal waste 
combustion unit that has no energy recovery (such as through a 
waterwall) in the furnace of the municipal waste combustion unit.
    Refuse-derived fuel means a type of municipal solid waste produced 
by processing municipal solid waste through shredding and size 
classification. That includes all classes of refuse-derived fuel 
including two fuels:
    (1) Low-density fluff refuse-derived fuel through densified refuse-
derived fuel.
    (2) Pelletized refuse-derived fuel.
    Same location means the same or contiguous properties under common 
ownership or control, including those separated only by a street, road, 
highway, or other public right-of-way. Common

[[Page 798]]

ownership or control includes properties that are owned, leased, or 
operated by the same entity, parent entity, subsidiary, subdivision, or 
any combination thereof. Entities may include a municipality, other 
governmental unit, or any quasi-governmental authority (for example, a 
public utility district or regional authority for waste disposal).
    Second calendar half means the period that starts on July 1 and ends 
on December 31 in any year.
    Shift supervisor means the person who is in direct charge and 
control of operating a municipal waste combustion unit and who is 
responsible for onsite supervision, technical direction, management, and 
overall performance of the municipal waste combustion unit during an 
assigned shift.
    Spreader stoker, mixed fuel-fired (coal/refuse-derived fuel) 
combustion unit means a municipal waste combustion unit that combusts 
coal and refuse-derived fuel simultaneously, in which coal is introduced 
to the combustion zone by a mechanism that throws the fuel onto a grate 
from above. Combustion takes place both in suspension and on the grate.
    Standard conditions when referring to units of measure mean a 
temperature of 20 [deg]C and a pressure of 101.3 kilopascals.
    Startup period means the period when a municipal waste combustion 
unit begins the continuous combustion of municipal solid waste. It does 
not include any warmup period during which the municipal waste 
combustion unit combusts fossil fuel or other solid waste fuel but 
receives no municipal solid waste.
    Stoker (refuse-derived fuel) combustion unit means a steam 
generating unit that combusts refuse-derived fuel in a semisuspension 
combusting mode, using air-fed distributors.
    Total mass dioxins/furans or total mass means the total mass of 
tetra-through octachlorinated dibenzo-p-dioxins and dibenzofurans as 
determined using EPA Reference Method 23 in appendix A of this part and 
the procedures specified in Sec. 60.1300.
    Twenty-four hour daily average or 24-hour daily average means either 
the arithmetic mean or geometric mean (as specified) of all hourly 
emission concentrations when the municipal waste combustion unit 
operates and combusts municipal solid waste measured during the 24 hours 
between 12:00 midnight and the following midnight.
    Untreated lumber means wood or wood products that have been cut or 
shaped and include wet, air-dried, and kiln-dried wood products. 
Untreated lumber does not include wood products that have been painted, 
pigment-stained, or pressure-treated by compounds such as chromate 
copper arsenate, pentachlorophenol, and creosote.
    Waterwall furnace means a municipal waste combustion unit that has 
energy (heat) recovery in the furnace (for example, radiant heat 
transfer section) of the combustion unit.
    Yard waste means grass, grass clippings, bushes, shrubs, and 
clippings from bushes and shrubs. They come from residential, 
commercial/retail, institutional, or industrial sources as part of 
maintaining yards or other private or public lands. Yard waste does not 
include two items:
    (1) Construction, renovation, and demolition wastes that are exempt 
from the definition of ``municipal solid waste'' in this section.
    (2) Clean wood that is exempt from the definition of ``municipal 
solid waste'' in this section.