How are the data from the continuous emission monitoring

[Title 40 CFR 60.1725]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Bbbb - Emission Guidelines and Compliance Times for Small]
[Sec. 60.1725 - How are the data from the continuous emission monitoring]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseHow are the data from the continuous emission monitoring60.1725Sec. 60.1725PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Emission Guidelines and Compliance Times for Small
Sec. 60.1725  How are the data from the continuous emission monitoring
systems used?

    You must use data from the continuous emission monitoring systems 
for sulfur dioxide, nitrogen oxides, and

[[Page 812]]

carbon monoxide to demonstrate continuous compliance with the applicable 
emission limits specified in tables 2, 3, 4, and 5 of this subpart. To 
demonstrate compliance for dioxins/furans, cadmium, lead, mercury, 
particulate matter, opacity, hydrogen chloride, and fugitive ash, see 
Sec. 60.1780.