Applicability and designation of affected facility.

[Title 40 CFR 60.180]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart R - Standards of Performance for Primary Lead Smelters]
[Sec. 60.180 - Applicability and designation of affected facility.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseApplicability and designation of affected facility.60.180Sec. 60.180PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Primary Lead Smelters
Sec. 60.180  Applicability and designation of affected facility.

    (a) The provisions of this subpart are applicable to the following 
affected facilities in primary lead smelters: sintering machine, 
sintering machine discharge end, blast furnace, dross reverberatory 
furnace, electric smelting furnace, and converter.
    (b) Any facility under paragraph (a) of this section that commences 
construction or modification after October 16, 1974, is subject to the 
requirements of this subpart.

[42 FR 37937, July 25, 1977]