How do I monitor the temperature of flue gases at the inlet

[Title 40 CFR 60.1815]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Bbbb - Emission Guidelines and Compliance Times for Small]
[Sec. 60.1815 - How do I monitor the temperature of flue gases at the inlet]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseHow do I monitor the temperature of flue gases at the inlet60.1815Sec. 60.1815PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Emission Guidelines and Compliance Times for Small
Sec. 60.1815  How do I monitor the temperature of flue gases at the inlet
of my particulate matter control device?

    You must install, calibrate, maintain, and operate a device to 
continuously measure the temperature of the flue gas stream at the inlet 
of each particulate matter control device.