Standard for particulate matter.

[Title 40 CFR 60.182]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart R - Standards of Performance for Primary Lead Smelters]
[Sec. 60.182 - Standard for particulate matter.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseStandard for particulate matter.60.182Sec. 60.182PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Primary Lead Smelters
Sec. 60.182  Standard for particulate matter.

    (a) On and after the date on which the performance test required to 
be conducted by Sec. 60.8 is completed, no owner or operator subject to 
the provisions of this subpart shall cause to be discharged into the 
atmosphere from any blast furnace, dross reverberatory furnace, or 
sintering machine discharge end any gases which contain particulate 
matter in excess of 50 mg/dscm (0.022 gr/dscf).
    (b) [Reserved]