Standard for sulfur dioxide.

[Title 40 CFR 60.183]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart R - Standards of Performance for Primary Lead Smelters]
[Sec. 60.183 - Standard for sulfur dioxide.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseStandard for sulfur dioxide.60.183Sec. 60.183PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Primary Lead Smelters
Sec. 60.183  Standard for sulfur dioxide.

    (a) On and after the date on which the performance test required to 
be conducted by Sec. 60.8 is completed, no owner or operator subject to 
the provisions of this subpart shall cause to be discharged into the 
atmosphere from

[[Page 387]]

any sintering machine, electric smelting furnace, or converter gases 
which contain sulfur dioxide in excess of 0.065 percent by volume.
    (b) [Reserved]