How must I monitor opacity for air curtain incinerators

[Title 40 CFR 60.1925]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Bbbb - Emission Guidelines and Compliance Times for Small]
[Sec. 60.1925 - How must I monitor opacity for air curtain incinerators]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseHow must I monitor opacity for air curtain incinerators60.1925Sec. 60.1925PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Emission Guidelines and Compliance Times for Small
Sec. 60.1925  How must I monitor opacity for air curtain incinerators 
that burn 100 percent yard waste?

    (a) Use EPA Reference Method 9 in appendix A of this part to 
determine compliance with the opacity limit.
    (b) Conduct an initial test for opacity as specified in Sec. 60.8.
    (c) After the initial test for opacity, conduct annual tests no more 
than 13 calendar months following the date of your previous test.