How do I demonstrate initial compliance with the emission

[Title 40 CFR 60.2135]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Cccc - Standards of Performance for Commercial and Industrial]
[Sec. 60.2135 - How do I demonstrate initial compliance with the emission]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseHow do I demonstrate initial compliance with the emission60.2135Sec. 60.2135PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Commercial and Industrial
Sec. 60.2135  How do I demonstrate initial compliance with the emission 
limitations and establish the operating limits?

    You must conduct an initial performance test, as required under 
Sec. 60.8, to determine compliance with the emission limitations in 
table 1 of this subpart and to establish operating limits using the 
procedure in Sec. 60.2110 or Sec. 60.2115. The initial performance 
test must be conducted using the test methods listed in table 1 of this 
subpart and the procedures in Sec. 60.2125.