[Title 40 CFR 60.251]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Y - Standards of Performance for Coal Preparation Plants]
[Sec. 60.251 - Definitions.]
[From the U.S. Government Printing Office]
40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseDefinitions.60.251Sec. 60.251PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Coal Preparation Plants
Sec. 60.251 Definitions.
As used in this subpart, all terms not defined herein have the
meaning given
[[Page 398]]
them in the Act and in subpart A of this part.
(a) Coal preparation plant means any facility (excluding underground
mining operations) which prepares coal by one or more of the following
processes: breaking, crushing, screening, wet or dry cleaning, and
thermal drying.
(b) Bituminous coal means solid fossil fuel classified as bituminous
coal by ASTM Designation D388-77, 90, 91, 95, or 98a (incorporated by
reference--see Sec. 60.17).
(c) Coal means all solid fossil fuels classified as anthracite,
bituminous, subbituminous, or lignite by ASTM Designation D388-77, 90,
91, 95, or 98a (incorporated by reference--see Sec. 60.17).
(d) Cyclonic flow means a spiraling movement of exhaust gases within
a duct or stack.
(e) Thermal dryer means any facility in which the moisture content
of bituminous coal is reduced by contact with a heated gas stream which
is exhausted to the atmosphere.
(f) Pneumatic coal-cleaning equipment means any facility which
classifies bituminous coal by size or separates bituminous coal from
refuse by application of air stream(s).
(g) Coal processing and conveying equipment means any machinery used
to reduce the size of coal or to separate coal from refuse, and the
equipment used to convey coal to or remove coal and refuse from the
machinery. This includes, but is not limited to, breakers, crushers,
screens, and conveyor belts.
(h) Coal storage system means any facility used to store coal except
for open storage piles.
(i) Transfer and loading system means any facility used to transfer
and load coal for shipment.
[41 FR 2234, Jan. 15, 1976, as amended at 48 FR 3738, Jan. 27, 1983; 65
FR 61757, Oct. 17, 2000]