[Title 40 CFR 60.263]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Z - Standards of Performance for Ferroalloy Production Facilities]
[Sec. 60.263 - Standard for carbon monoxide.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.263Sec. 60.263PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Ferroalloy Production Facilities
Sec. 60.263  Standard for carbon monoxide.

    (a) On and after the date on which the performance test required to 
be conducted by Sec. 60.8 is completed, no owner or operator subject to 
the provisions of this subpart shall cause to be discharged in to the 
atmosphere from any electric submerged arc furnace any gases which 
contain, on a dry basis, 20 or greater volume percent of carbon 
monoxide. Combustion of such gases under conditions acceptable to the 
Administrator constitutes compliance with this section. Acceptable 
conditions include, but are not limited to, flaring of gases or use of 
gases as fuel for other processes.