[Title 40 CFR 60.264]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Z - Standards of Performance for Ferroalloy Production Facilities]
[Sec. 60.264 - Emission monitoring.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.264Sec. 60.264PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Ferroalloy Production Facilities
Sec. 60.264  Emission monitoring.

    (a) The owner or operator subject to the provisions of this subpart 
shall install, calibrate, maintain and operate a continuous monitoring 
system for measurement of the opacity of emissions discharged into the 
atmosphere from the control device(s).
    (b) For the purpose of reports required under Sec. 60.7(c), the 
owner or operator shall report as excess emissions all six-minute 
periods in which the average opacity is 15 percent or greater.
    (c) The owner or operator subject to the provisions of this subpart 
shall submit a written report of any product change to the 
Administrator. Reports of product changes must be postmarked not later 
than 30 days after implementation of the product change.