[Title 40 CFR 60.272a]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Aaa - Standards of Performance for Steel Plants: Electric Arc]
[Sec. 60.272a - Standard for particulate matter.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseStandard for particulate matter.60.272aSec. 60.272aPROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Steel Plants: Electric Arc
Sec. 60.272a  Standard for particulate matter.

    (a) On and after the date of which the performance test required to 
be conducted by Sec. 60.8 is completed, no owner or operator subject to 
the provisions of this subpart shall cause to be discharged into the 
atmosphere from an EAF or an AOD vessel any gases which:
    (1) Exit from a control device and contain particulate matter in 
excess of 12 mg/dscm (0.0052 gr/dscf);
    (2) Exit from a control device and exhibit 3 percent opacity or 
greater; and
    (3) Exit from a shop and, due solely to the operations of any 
affected EAF(s) or AOD vessel(s), exhibit 6 percent opacity or greater.
    (b) On and after the date on which the performance test required to 
be conducted by Sec. 60.8 is completed, no owner or operator subject to 
the provisions of this subpart shall cause to be discharged into the 
atmosphere from the dust-handling system any gases that exhibit 10 
percent opacity or greater.