[Title 40 CFR 60.280]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Bb - Standards of Performance for Kraft Pulp Mills]
[Sec. 60.280 - Applicability and designation of affected facility.]
[From the U.S. Government Printing Office]
40PROTECTION OF ENVIRONMENT62009-07-012009-07-01falseApplicability and designation of affected facility.60.280Sec. 60.280PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Kraft Pulp Mills
Sec. 60.280 Applicability and designation of affected facility.
(a) The provisions of this subpart are applicable to the following
affected facilities in kraft pulp mills: Digester system, brown stock
washer system, multiple-effect evaporator system, recovery furnace,
smelt dissolving tank, lime kiln, and condensate stripper system. In
pulp mills where kraft pulping is combined with neutral sulfite
semichemical pulping, the provisions of this subpart are applicable when
any
[[Page 419]]
portion of the material charged to an affected facility is produced by
the kraft pulping operation.
(b) Except as noted in Sec. 60.283(a)(1)(iv), any facility under
paragraph (a) of this section that commences construction or
modification after September 24, 1976, is subject to the requirements of
this subpart.
[51 FR 18544, May 20, 1986]