[Title 40 CFR 60.303]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Dd - Standards of Performance for Grain Elevators]
[Sec. 60.303 - Test methods and procedures.]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.303Sec. 60.303PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Grain Elevators
Sec. 60.303  Test methods and procedures.

    (a) In conducting the performance tests required in Sec. 60.8, the 
owner or operator shall use as reference methods and procedures the test 
methods in appendix A of this part or other methods and procedures as 
specified in this section, except as provided in Sec. 60.8(b). 
Acceptable alternative methods and procedures are given in paragraph (c) 
of this section.
    (b) The owner or operator shall determine compliance with the 
particulate matter standards in Sec. 60.302 as follows:
    (1) Method 5 shall be used to determine the particulate matter 
concentration and the volumetric flow rate of the effluent gas. The 
sampling time and sample volume for each run shall be at least 60 
minutes and 1.70 dscm (60 dscf). The probe and filter holder shall be 
operated without heaters.
    (2) Method 2 shall be used to determine the ventilation volumetric 
flow rate.
    (3) Method 9 and the procedures in Sec. 60.11 shall be used to 
determine opacity.
    (c) The owner or operator may use the following as alternatives to 
the reference methods and procedures specified in this section:
    (1) For Method 5, Method 17 may be used.

[54 FR 6674, Feb. 14, 1989]