[Title 40 CFR 60.4239]
[Code of Federal Regulations (annual edition) - July 1, 2009 Edition]
[Title 40 - PROTECTION OF ENVIRONMENT]
[Chapter I - ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)]
[Subchapter C - AIR PROGRAMS (CONTINUED)]
[Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--]
[Subpart Jjjj - Standards of Performance for Stationary Spark Ignition]
[Sec. 60.4239 - What are my compliance requirements if I am a manufacturer]
[From the U.S. Government Printing Office]


40PROTECTION OF ENVIRONMENT62009-07-012009-07-01false60.4239Sec. 60.4239PROTECTION OF ENVIRONMENTENVIRONMENTAL PROTECTION AGENCY (CONTINUED)AIR PROGRAMS (CONTINUED)STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES--Standards of Performance for Stationary Spark Ignition
Sec. 60.4239  What are my compliance requirements if I am a manufacturer
of stationary SI internal combustion engines 19 KW (25 HP)

that use  gasoline or a manufacturer of equipment containing such 
          engines?

    Stationary SI internal combustion engine manufacturers who are 
subject to the emission standards specified in Sec. 60.4231(b) must 
certify their stationary SI ICE using the certification procedures 
required in 40 CFR part 1048, subpart C, and must test their engines as 
specified in that part. Stationary SI internal combustion engine 
manufacturers who certify their stationary SI ICE with a maximum engine 
power less than or equal to 30 KW (40 HP) with a total displacement less 
than or equal to 1,000 cc to the certification emission standards and 
other requirements for new nonroad SI engines in 40 CFR part 90 or 40 
CFR part 1054, and manufacturers of stationary SI emergency engines that 
are greater than 25 HP and less than 130 HP who meet the Phase 1 
emission standards in 40 CFR 90.103, applicable to class II engines, 
must certify their stationary SI ICE using the certification procedures 
required in 40 CFR part 90, subpart B, or 40 CFR part 1054, subpart C, 
as applicable, and must test their engines as specified in those parts. 
Manufacturers of equipment containing stationary SI internal combustion 
engines meeting the provisions of 40 CFR part 1054 must meet the 
provisions of 40 CFR part 1060, subpart C, to the extent they apply to 
equipment manufacturers.

[73 FR 59176, Oct. 8, 2008]