Oct. 1, 2010 CODE OF FEDERAL REGULATIONS 49 Parts 100 to 185 Revised as of October 1, 2010 Transportation Containing a codification of documents of general applicability and future effect As of October 1, 2010 With Ancillaries

Published by

Office of the Federal Register

National Archives and Records

Administration

 A Special Edition of the Federal Register U.S. GOVERNMENT OFFICIAL EDITION NOTICE Legal Status and Use of Seals and Logos archives.ai

The seal of the National Archives and Records Administration (NARA) authenticates the Code of Federal Regulations (CFR) as the official codification of Federal regulations established under the Federal Register Act. Under the provisions of 44 U.S.C. 1507, the contents of the CFR, a special edition of the Federal Register, shall be judicially noticed. The CFR is prima facie evidence of the original documents published in the Federal Register (44 U.S.C. 1510).

It is prohibited to use NARA's official seal and the stylized Code of Federal Regulations logo on any republication of this material without the express, written permission of the Archivist of the United States or the Archivist's designee. Any person using NARA's official seals and logos in a manner inconsistent with the provisions of 36 CFR part 1200 is subject to the penalties specified in 18 U.S.C. 506, 701, and 1017.

Use of ISBN Prefix

This is the Official U.S. Government edition of this publication and is herein identified to certify its authenticity. Use of the 0-16 ISBN prefix is for U.S. Government Printing Office Official Editions only. The Superintendent of Documents of the U.S. Government Printing Office requests that any reprinted edition clearly be labeled as a copy of the authentic work with a new ISBN.

gpologo.eps

U . S . G O V E R N M E N T P R I N T I N G O F F I C E

U.S. Superintendent of Documents • Washington, DC 20402-0001

http://bookstore.gpo.gov

Phone: toll-free (866) 512-1800; DC area (202) 512-1800

 Table of Contents Page Explanation v Title 49: SUBTITLE B—Other Regulations Relating to Transportation Chapter I—Pipeline and Hazardous Materials Safety Administration, Department of Transportation 5 Finding Aids: Table of CFR Titles and Chapters 1183 Alphabetical List of Agencies Appearing in the CFR 1203 List of CFR Sections Affected 1213

Cite this Code:CFR

To cite the regulations in this volume use title, part and section number. Thus, 49 CFR 105.5 refers to title 49, part 105, section 5. Explanation

The Code of Federal Regulations is a codification of the general and permanent rules published in the Federal Register by the Executive departments and agencies of the Federal Government. The Code is divided into 50 titles which represent broad areas subject to Federal regulation. Each title is divided into chapters which usually bear the name of the issuing agency. Each chapter is further subdivided into parts covering specific regulatory areas.

Each volume of the Code is revised at least once each calendar year and issued on a quarterly basis approximately as follows:

Title 1 through Title 16

as of January 1

Title 17 through Title 27

as of April 1

Title 28 through Title 41

as of July 1

Title 42 through Title 50

as of October 1

The appropriate revision date is printed on the cover of each volume.

LEGAL STATUS

The contents of the Federal Register are required to be judicially noticed (44 U.S.C. 1507). The Code of Federal Regulations is prima facie evidence of the text of the original documents (44 U.S.C. 1510).

 HOW TO USE THE CODE OF FEDERAL REGULATIONS

The Code of Federal Regulations is kept up to date by the individual issues of the Federal Register. These two publications must be used together to determine the latest version of any given rule.

To determine whether a Code volume has been amended since its revision date (in this case, October 1, 2010), consult the “List of CFR Sections Affected (LSA),” which is issued monthly, and the “Cumulative List of Parts Affected,” which appears in the Reader Aids section of the daily Federal Register. These two lists will identify the Federal Register page number of the latest amendment of any given rule.

 EFFECTIVE AND EXPIRATION DATES

Each volume of the Code contains amendments published in the Federal Register since the last revision of that volume of the Code. Source citations for the regulations are referred to by volume number and page number of the Federal Register and date of publication. Publication dates and effective dates are usually not the same and care must be exercised by the user in determining the actual effective date. In instances where the effective date is beyond the cut-off date for the Code a note has been inserted to reflect the future effective date. In those instances where a regulation published in the Federal Register states a date certain for expiration, an appropriate note will be inserted following the text.

 OMB CONTROL NUMBERS

The Paperwork Reduction Act of 1980 (Pub. L. 96-511) requires Federal agencies to display an OMB control number with their information collection request. Many agencies have begun publishing numerous OMB control numbers as amendments to existing regulations in the CFR. These OMB numbers are placed as close as possible to the applicable recordkeeping or reporting requirements.

 OBSOLETE PROVISIONS

Provisions that become obsolete before the revision date stated on the cover of each volume are not carried. Code users may find the text of provisions in effect on a given date in the past by using the appropriate numerical list of sections affected. For the period before January 1, 2001, consult either the List of CFR Sections Affected, 1949-1963, 1964-1972, 1973-1985, or 1986-2000, published in eleven separate volumes. For the period beginning January 1, 2001, a “List of CFR Sections Affected” is published at the end of each CFR volume.

 “[RESERVED]” TERMINOLOGY

The term “[Reserved]” is used as a place holder within the Code of Federal Regulations. An agency may add regulatory information at a “[Reserved]” location at any time. Occasionally “[Reserved]” is used editorially to indicate that a portion of the CFR was left vacant and not accidentally dropped due to a printing or computer error.

 INCORPORATION BY REFERENCE

What is incorporation by reference? Incorporation by reference was established by statute and allows Federal agencies to meet the requirement to publish regulations in the Federal Register by referring to materials already published elsewhere. For an incorporation to be valid, the Director of the Federal Register must approve it. The legal effect of incorporation by reference is that the material is treated as if it were published in full in the Federal Register (5 U.S.C. 552(a)). This material, like any other properly issued regulation, has the force of law.

What is a proper incorporation by reference? The Director of the Federal Register will approve an incorporation by reference only when the requirements of 1 CFR part 51 are met. Some of the elements on which approval is based are:

(a) The incorporation will substantially reduce the volume of material published in the Federal Register.

(b) The matter incorporated is in fact available to the extent necessary to afford fairness and uniformity in the administrative process.

(c) The incorporating document is drafted and submitted for publication in accordance with 1 CFR part 51.

What if the material incorporated by reference cannot be found? If you have any problem locating or obtaining a copy of material listed as an approved incorporation by reference, please contact the agency that issued the regulation containing that incorporation. If, after contacting the agency, you find the material is not available, please notify the Director of the Federal Register, National Archives and Records Administration, 8601 Adelphi Road, College Park, MD 20740-6001, or call 202-741-6010.

 CFR INDEXES AND TABULAR GUIDES

A subject index to the Code of Federal Regulations is contained in a separate volume, revised annually as of January 1, entitled CFR Index and Finding Aids. This volume contains the Parallel Table of Authorities and Rules. A list of CFR titles, chapters, subchapters, and parts and an alphabetical list of agencies publishing in the CFR are also included in this volume.

An index to the text of “Title 3—The President” is carried within that volume.

The Federal Register Index is issued monthly in cumulative form. This index is based on a consolidation of the “Contents” entries in the daily Federal Register.

A List of CFR Sections Affected (LSA) is published monthly, keyed to the revision dates of the 50 CFR titles.

 REPUBLICATION OF MATERIAL

There are no restrictions on the republication of material appearing in the Code of Federal Regulations.

 INQUIRIES

For a legal interpretation or explanation of any regulation in this volume, contact the issuing agency. The issuing agency's name appears at the top of odd-numbered pages.

For inquiries concerning CFR reference assistance, call 202-741-6000 or write to the Director, Office of the Federal Register, National Archives and Records Administration, 8601 Adelphi Road, College Park, MD 20740-6001 or e-mail fedreg.info@nara.gov.

 SALES

The Government Printing Office (GPO) processes all sales and distribution of the CFR. For payment by credit card, call toll-free, 866-512-1800, or DC area, 202-512-1800, M-F 8 a.m. to 4 p.m. e.s.t. or fax your order to 202-512-2250, 24 hours a day. For payment by check, write to: US Government Printing Office - New Orders, P.O. Box 979050, St. Louis, MO 63197-9000. For GPO Customer Service call 202-512-1803.

 ELECTRONIC SERVICES

The full text of the Code of Federal Regulations, the LSA (List of CFR Sections Affected), The United States Government Manual, the Federal Register, Public Laws, Public Papers, Daily Compilation of Presidential Documents and the Privacy Act Compilation are available in electronic format via Federalregister.gov. For more information, contact Electronic Information Dissemination Services, U.S. Government Printing Office. Phone 202-512-1530, or 888-293-6498 (toll-free). E-mail, gpoaccess@gpo.gov.

The Office of the Federal Register also offers a free service on the National Archives and Records Administration's (NARA) World Wide Web site for public law numbers, Federal Register finding aids, and related information. Connect to NARA's web site at www.archives.gov/federal-register. The NARA site also contains links to GPO Access.

Raymond A. Mosley,

Director,

Office of the Federal Register.

October 1, 2010.

THIS TITLE

Title 49—Transportation is composed of nine volumes. The parts in these volumes are arranged in the following order: Parts 1-99, parts 100-185, parts 186-199, parts 200-299, parts 300-399, parts 400-599, parts 600-999, parts 1000-1199, part 1200 to End. The first volume (parts 1-99) contains current regulations issued under subtitle A—Office of the Secretary of Transportation; the second volume (parts 100-185) and the third volume (parts 186-199) contain the current regulations issued under chapter I—Pipeline and Hazardous Materials Safety Administration (DOT); the fourth volume (parts 200-299) contains the current regulations issued under chapter II—Federal Railroad Administration (DOT); the fifth volume (parts 300-399) contains the current regulations issued under chapter III—Federal Motor Carrier Safety Administration (DOT); the sixth volume (parts 400-599) contains the current regulations issued under chapter IV—Coast Guard (DHS), chapter V—National Highway Traffic Safety Administration (DOT); the seventh volume (parts 600-999) contains the current regulations issued under chapter VI—Federal Transit Administration (DOT), chapter VII—National Railroad Passenger Corporation (AMTRAK), and chapter VIII—National Transportation Safety Board; the eighth volume (parts 1000-1199) contains the current regulations issued under chapter X—Surface Transportation Board and the ninth volume (part 1200 to End) contains the current regulations issued under chapter X—Surface Transportation Board, chapter XI—Research and Innovative Technology Administration, and chapter XII—Transportation Security Administration, Department of Transportation. The contents of these volumes represent all current regulations codified under this title of the CFR as of October 1, 2010.

In the volume containing parts 100-185, see § 172.101 for the Hazardous Materials Table. The Federal Motor Vehicle Safety Standards appear in part 571.

Redesignation tables for chapter III—Federal Motor Carrier Safety Administration, Department of Transportation and chapter XII—Transportation Security Administration, Department of Transportation appear in the Finding Aids section of the fifth and ninth volumes.

For this volume, Jonn V. Lilyea was Chief Editor. The Code of Federal Regulations publication program is under the direction of Michael L. White, assisted by Ann Worley.

 <LRH>49 CFR Ch. I (10-1-10 Edition)</LRH> <RRH>Pipeline and Hazardous Materials Safety Admin., DOT</RRH> <CFRTITLE> <TITLEHD> <PRTPAGE P="1"/> <HD SOURCE="HED">Title 49—Transportation</HD> <P>(This book contains parts 100 to 185)</P> </TITLEHD> <CFRTOC> <SUBTI> <HD SOURCE="HED">SUBTITLE B—<E T="04">Other Regulations Relating To Transportation</E> </HD> </SUBTI> <PTHD>Part</PTHD> <CHAPTI> <SUBJECT> <E T="04">chapter i</E>—Pipeline and Hazardous Materials Safety Administration, Department of Transportation</SUBJECT> <PG>105</PG> </CHAPTI> </CFRTOC> </CFRTITLE> <SUBTITLE> <PRTPAGE P="3"/> <HD SOURCE="HED">Subtitle B—Other Regulations Relating to Transportation</HD> <CHAPTER> <TOC> <TOCHD> <PRTPAGE P="5"/> <HD SOURCE="HED">CHAPTER I—PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION</HD> </TOCHD> <SUBCHAP> <HD SOURCE="HED">SUBCHAPTER A—HAZARDOUS MATERIALS AND OIL TRANSPORTATION</HD> </SUBCHAP> <PTHD>Part</PTHD> <PGHD>Page</PGHD> <CHAPTI> <PT>105</PT> <SUBJECT>Hazardous Materials Program definitions and general procedures</SUBJECT> <PG>7</PG> <PT>106</PT> <SUBJECT>Rulemaking procedures</SUBJECT> <PG>13</PG> <PT>107</PT> <SUBJECT>Hazardous materials program procedures</SUBJECT> <PG>19</PG> <PT>110</PT> <SUBJECT>Hazardous materials public sector training and planning grants</SUBJECT> <PG>65</PG> </CHAPTI> <SUBCHAP> <HD SOURCE="HED">SUBCHAPTER B—OIL TRANSPORTATION</HD> </SUBCHAP> <CHAPTI> <PT>130</PT> <SUBJECT>Oil spill prevention and response plans</SUBJECT> <PG>73</PG> </CHAPTI> <SUBCHAP> <HD SOURCE="HED">SUBCHAPTER C—HAZARDOUS MATERIALS REGULATIONS</HD> </SUBCHAP> <CHAPTI> <PT>171</PT> <SUBJECT>General information, regulations, and definitions</SUBJECT> <PG>76</PG> <PT>172</PT> <SUBJECT>Hazardous materials table, special provisions, hazardous materials communications, emergency response information, training requirements, and security plans</SUBJECT> <PG>123</PG> <PT>173</PT> <SUBJECT>Shippers—general requirements for shipments and packagings</SUBJECT> <PG>406</PG> <PT>174</PT> <SUBJECT>Carriage by rail</SUBJECT> <PG>689</PG> <PT>175</PT> <SUBJECT>Carriage by aircraft</SUBJECT> <PG>714</PG> <PT>176</PT> <SUBJECT>Carriage by vessel</SUBJECT> <PG>735</PG> <PT>177</PT> <SUBJECT>Carriage by public highway</SUBJECT> <PG>796</PG> <PT>178</PT> <SUBJECT>Specifications for packagings</SUBJECT> <PG>818</PG> <PT>179</PT> <SUBJECT>Specifications for tank cars</SUBJECT> <PG>1067</PG> <PT>180</PT> <SUBJECT>Continuing qualification and maintenance of packagings</SUBJECT> <PG>1125</PG> <PT>181-185</PT> <RESERVED>[Reserved]</RESERVED> </CHAPTI> </TOC> <SUBCHAP TYPE="N"> <PRTPAGE P="7"/> <HD SOURCE="HED">SUBCHAPTER A—HAZARDOUS MATERIALS AND OIL TRANSPORTATION</HD> <PART> <EAR>Pt. 105</EAR> <HD SOURCE="HED">PART 105—HAZARDOUS MATERIALS PROGRAM DEFINITIONS AND GENERAL PROCEDURES</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—Definitions</HD> <SECHD>Sec.</SECHD> <SECTNO>105.5</SECTNO> <SUBJECT>Definitions.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—General Procedures</HD> <SECTNO>105.15</SECTNO> <SUBJECT>Defined terms used in this subpart.</SUBJECT> <SUBJGRP> <HD SOURCE="HED">Obtaining Guidance and Public Information</HD> <SECTNO>105.20</SECTNO> <SUBJECT>Guidance and interpretations.</SUBJECT> <SECTNO>105.25</SECTNO> <SUBJECT>Reviewing public documents.</SUBJECT> <SECTNO>105.26</SECTNO> <SUBJECT>Obtaining records on file with PHMSA.</SUBJECT> <SECTNO>105.30</SECTNO> <SUBJECT>Information made available to the public and request for confidential treatment.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Serving Documents</HD> <SECTNO>105.35</SECTNO> <SUBJECT>Serving documents in PHMSA proceedings.</SUBJECT> <SECTNO>105.40</SECTNO> <SUBJECT>Designated agents for non-residents.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Subpoenas</HD> <SECTNO>105.45</SECTNO> <SUBJECT>Issuing a subpoena.</SUBJECT> <SECTNO>105.50</SECTNO> <SUBJECT>Serving a subpoena.</SUBJECT> <SECTNO>105.55</SECTNO> <SUBJECT>Refusal to obey a subpoena.</SUBJECT> </SUBJGRP> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>49 U.S.C. 5101-5127; 49 CFR 1.53.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>67 FR 42951, June 25, 2002, unless otherwise noted.</P> </SOURCE> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to part 105 appear at 70 FR 56087, Sept. 23, 2005.</P> </EDNOTE> <SUBPART> <HD SOURCE="HED">Subpart A—Definitions</HD> <SECTION> <SECTNO>§ 105.5</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>(a) This part contains the definitions for certain words and phrases used throughout this subchapter (49 CFR parts 105 through 110). At the beginning of each subpart, the Pipeline and Hazardous Materials Safety Administration (“PHMSA” or “we”) will identify the defined terms that are used within the subpart—by listing them—and refer the reader to the definitions in this part. This way, readers will know that PHMSA has given a term a precise meaning and will know where to look for it.</P> <P>(b) Terms used in this part are defined as follows:</P> <P> <E T="03">Associate Administrator</E> means Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration.</P> <P> <E T="03">Approval</E> means written consent, including a competent authority approval, from the Associate Administrator or other designated Department official, to perform a function that requires prior consent under subchapter C of this chapter (49 CFR parts 171 through 180).</P> <P> <E T="03">Competent Authority</E> means a national agency that is responsible, under its national law, for the control or regulation of some aspect of hazardous materials (dangerous goods) transportation. Another term for Competent Authority is “Appropriate authority” which is used in the International Civil Aviation Organization's (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air. The Associate Administrator is the United States Competent Authority for purposes of 49 CFR part 107.</P> <P> <E T="03">Competent Authority Approval</E> means an approval by the competent authority that is required under an international standard (for example, the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air and the International Maritime Dangerous Goods Code). Any of the following may be considered a competent authority approval if it satisfies the requirement of an international standard:</P> <P>(1) A specific regulation in subchapter A or C of this chapter.</P> <P>(2) A special permit or approval issued under subchapter A or C of this chapter.</P> <P>(3) A separate document issued to one or more persons by the Associate Administrator.</P> <P> <E T="03">Federal hazardous material transportation law</E> means 49 U.S.C. 5101 <E T="03">et seq.</E> </P> <P> <E T="03">File</E> or <E T="03">Filed</E> means received by the appropriate PHMSA or other designated office within the time specified in a regulation or rulemaking document.<PRTPAGE P="8"/> </P> <P> <E T="03">Hazardous material</E> means a substance or material that the Secretary of Transportation has determined is capable of posing an unreasonable risk to health, safety, and property when transported in commerce, and has designated as hazardous under section 5103 of Federal hazardous materials transportation law (49 U.S.C. 5103). The term includes hazardous substances, hazardous wastes, marine pollutants, elevated temperature materials, materials designated as hazardous in the Hazardous Materials Table (see 49 CFR 172.101), and materials that meet the defining criteria for hazard classes and divisions in part 173 of subchapter C of this chapter.</P> <P> <E T="03">Hazardous Materials Regulations</E> or <E T="03">HMR</E> means the regulations at 49 CFR parts 171 through 180.</P> <P> <E T="03">Indian tribe</E> has the same meaning given that term in section 4 of the Indian Self-Determination and Education Assistance Act (25 U.S.C. 450b).</P> <P> <E T="03">Person</E> means an individual, firm, copartnership, corporation, company, association, or joint-stock association (including any trustee, receiver, assignee, or similar representative); or a government or Indian tribe (or an agency or instrumentality of any government or Indian tribe) that transports a hazardous material to further a commercial enterprise or offers a hazardous material for transportation in commerce. Person does not include the following:</P> <P>(1) The United States Postal Service.</P> <P>(2) Any agency or instrumentality of the Federal government, for the purposes of 49 U.S.C. 5123 (civil penalties) and 5124 (criminal penalties).</P> <P>(3) Any government or Indian tribe (or an agency or instrumentality of any government or Indian tribe) that transports hazardous material for a governmental purpose.</P> <P> <E T="03">Political subdivision</E> means a municipality; a public agency or other instrumentality of one or more States, municipalities, or other political body of a State; or a public corporation, board, or commission established under the laws of one or more States.</P> <P> <E T="03">Preemption determination</E> means an administrative decision by the Associate Administrator that Federal hazardous materials law does or does not void a specific State, political subdivision, or Indian tribe requirement.</P> <P> <E T="03">Regulations issued under Federal hazardous material transportation law</E> include this subchapter A (parts 105-110) and subchapter C (parts 171-180) of this chapter, certain regulations in chapter I (United States Coast Guard) of title 46, Code of Federal Regulations, and in chapters III (Federal Motor Carrier Safety Administration) and XII (Transportation Security Administration) of subtitle B of this title, as indicated by the authority citations therein.</P> <P> <E T="03">Special permit</E> means a document issued by the Associate Administrator under the authority of 49 U.S.C. 5117 permitting a person to perform a function that is not otherwise permitted under subchapter A or C of this chapter, or other regulations issued under 49 U.S.C. 5101 et seq. (e.g., Federal Motor Carrier Safety routing requirements). The terms “special permit” and “exemption” have the same meaning for purposes of subchapter A or C of this chapter or other regulations issued under 49 U.S.C. 5101 through 5127. An exemption issued prior to October 1, 2005 remains valid until it is past its expiration date, terminated by the Associate Administrator, or is issued as a special permit, whichever occurs first.</P> <P> <E T="03">State</E> means a State of the United States, the District of Columbia, the Commonwealth of Puerto Rico, the Commonwealth of the Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other territory or possession of the United States designated by the Secretary.</P> <P> <E T="03">Transports</E> or <E T="03">Transportation</E> means the movement of property and loading, unloading, or storage incidental to the movement.</P> <P> <E T="03">Waiver of Preemption</E> means a decision by the Associate Administrator to forego preemption of a non-Federal requirement—that is, to allow a State, political subdivision or Indian tribe requirement to remain in effect. The non-Federal requirement must provide at least as much public protection as the Federal hazardous materials transportation law and the regulations <PRTPAGE P="9"/>issued under Federal hazardous materials transportation law, and may not unreasonably burden commerce.</P> <CITA>[67 FR 42951, June 25, 2002, as amended at 68 FR 52846, Sept. 8, 2003; 70 FR 56087, Sept. 23, 2005; 70 FR 73158, Dec. 9, 2005]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—General Procedures</HD> <SECTION> <SECTNO>§ 105.15</SECTNO> <SUBJECT>Defined terms used in this subpart.</SUBJECT> <P>The following defined terms (see subpart A of this part) appear in this subpart: Approval; Federal hazardous material transportation law; Hazardous material; Hazardous materials regulations; Indian tribe; Preemption determination; Special permit; State; Transportation; Waiver of preemption</P> <CITA>[67 FR 42951, June 25, 2002, as amended at 70 FR 73159, Dec. 9, 2005]</CITA> </SECTION> <SUBJGRP> <HD SOURCE="HED">Obtaining Guidance and Public Information</HD> <SECTION> <SECTNO>§ 105.20</SECTNO> <SUBJECT>Guidance and interpretations.</SUBJECT> <P>(a) <E T="03">Hazardous materials regulations</E>. You can obtain information and answers to your questions on compliance with the hazardous materials regulations (49 CFR parts 171 through 180) and interpretations of those regulations by contacting PHMSA's Office of Hazardous Materials Safety as follows:</P> <P>(1) Call the Hazardous Materials Information Center at 1-800-467-4922 (in Washington, DC, call (202) 366-4488). The Center is staffed from 9 a.m. through 5 p.m. Eastern time, Monday through Friday except Federal holidays. After hours, you can leave a recorded message and your call will be returned by the next business day.</P> <P>(2) E-mail the Hazardous Materials Information Center at <E T="03">infocntr@dot.gov</E>.</P> <P>(3) Obtain hazardous materials safety information via the Internet at <E T="03">http://www.phmsa.dot.gov</E>.</P> <P>(4) Send a letter, with your return address and a daytime telephone number, to: Office of Hazardous Materials Standards, Pipeline and Hazardous Materials Safety Administration, Attn: PHH-10, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(b) <E T="03">Federal hazardous materials transportation law and preemption</E>. You can obtain information and answers to your questions on Federal hazardous materials transportation law, 49 U.S.C. 5101 <E T="03">et seq.</E>, and Federal preemption of State, local, and Indian tribe hazardous material transportation requirements, by contacting PHMSA's Office of the Chief Counsel as follows:</P> <P>(1) Call the office of the Chief Counsel at (202) 366-4400 from 9 a.m. to 5 p.m. Eastern time, Monday through Friday except Federal holidays.</P> <P>(2) Access information from the Office of the Chief Counsel via the Internet at <E T="03">http://www.phmsa.dot.gov.</E> </P> <P>(3) Send a letter, with your return address and a daytime telephone number, to: Office of the Chief Counsel, Pipeline and Hazardous Materials Safety Administration, Attn: PHC-10, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(4) Contact the Office of the Chief Counsel for a copy of applications for preemption determinations, waiver of preemption determinations, and inconsistency rulings received by PHMSA before February 1, 1997.</P> <CITA>[70 FR 56087, Sept. 23, 2005, as amended at 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 105.25</SECTNO> <SUBJECT>Reviewing public documents.</SUBJECT> <P>PHMSA is required by statute to make certain documents and information available to the public. You can review and copy publicly available documents and information at the locations described in this section.</P> <P>(a) <E T="03">DOT Docket Management System.</E> Unless a particular document says otherwise, the following documents are available for public review and copying at the Department of Transportation's Docket Management System, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001, or for review and downloading through the Internet at <E T="03">http://www.regulations.gov</E>.</P> <P>(1) Rulemaking documents in proceedings started after February 1, 1997, including notices of proposed rulemaking, advance notices of proposed rulemaking, public comments, related <E T="04">Federal Register</E> notices, final rules, appeals, and PHMSA's decisions in response to appeals.<PRTPAGE P="10"/> </P> <P>(2) Applications for special permits numbered DOT-E or DOT-SP 11832 and above. Also available are supporting data, memoranda of any informal meetings with applicants, related <E T="04">Federal Register</E> notices, public comments, and decisions granting or denying applications for special permits.</P> <P>(3) Applications for preemption determinations and waiver of preemption determinations received by PHMSA after February 1, 1997. Also available are public comments, <E T="04">Federal Register</E> notices, and PHMSA's rulings, determinations, decisions on reconsideration, and orders issued in response to those applications.</P> <P>(b) <E T="03">Office of Pipeline and Hazardous Materials Safety Administration's Office of Hazardous Materials Safety.</E> (1) You may obtain documents (<E T="03">e.g.</E>, proposed and final rules, notices, letters of clarification, safety notices, DOT forms and other documents) by contacting the Hazardous Materials Information Center at 1-800-467-4922 or through the Internet at <E T="03">http://www.phmsa.dot.gov.</E> </P> <P>(2) Upon your written request, we will make the following documents and information available to you:</P> <P>(i) Appeals under 49 CFR part 107 and PHMSA's decisions issued in response to those appeals.</P> <P>(ii) Records of compliance order proceedings and PHMSA compliance orders.</P> <P>(iii) Applications for approvals, including supporting data, memoranda of any informal meetings with applicants, and decisions granting or denying approvals applications.</P> <P>(iv) Applications for special permits numbered below DOT-E or DOT-SP 11832 and related background information are available for public review and copying at the Office of Hazardous Materials Safety, Office of Hazardous Materials Special Permits and Approvals, U.S. Department of Transportation, PHH-30, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(v) Other information about PHMSA's hazardous materials program required by statute to be made available to the public for review and copying and any other information PHMSA decides should be available to the public.</P> <P>(3) Your written request to review documents should include the following:</P> <P>(i) A detailed description of the documents you wish to review.</P> <P>(ii) Your name, address, and telephone number.</P> <P>(4) Send your written request to: Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration, Attn: PHH-1, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <CITA>[70 FR 56088, Sept. 23, 2005, as amended at 70 FR 73159, Dec. 9, 2005; 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 105.26</SECTNO> <SUBJECT>Obtaining records on file with PHMSA.</SUBJECT> <P>To obtain records on file with PHMSA, other than those described in § 105.25, you must file a request with PHMSA under the Freedom of Information Act (FOIA) (5 U.S.C. 552). The procedures for filing a FOIA request are contained in 49 CFR part 7.</P> </SECTION> <SECTION> <SECTNO>§ 105.30</SECTNO> <SUBJECT>Information made available to the public and request for confidential treatment.</SUBJECT> <P>When you submit information to PHMSA during a rulemaking proceeding, as part of your application for special permit or approval, or for any other reason, we may make that information publicly available unless you ask that we keep the information confidential.</P> <P>(a) <E T="03">Asking for confidential treatment.</E> You may ask us to give confidential treatment to information you give to the agency by taking the following steps:</P> <P>(1) Mark “confidential” on each page of the original document you would like to keep confidential.</P> <P>(2) Send us, along with the original document, a second copy of the original document with the confidential information deleted.</P> <P>(3) Explain why the information you are submitting is confidential (for example, it is exempt from mandatory public disclosure under the Freedom of Information Act, 5 U.S.C. 552 or it is information referred to in 18 U.S.C. 1905).<PRTPAGE P="11"/> </P> <P>(b) <E T="03">PHMSA Decision.</E> PHMSA will decide whether or not to treat your information as confidential. We will notify you, in writing, of a decision to grant or deny confidentiality at least five days before the information is publicly disclosed, and give you an opportunity to respond.</P> <CITA>[67 FR 42951, June 25, 2002, as amended at 70 FR 73159, Dec. 9, 2005]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Serving Documents</HD> <SECTION> <SECTNO>§ 105.35</SECTNO> <SUBJECT>Serving documents in PHMSA proceedings.</SUBJECT> <P>(a) <E T="03">Service by PHMSA.</E> We may serve the document by one of the following methods, except where a different method of service is specifically required:</P> <P>(1) Registered or certified mail.</P> <P>(i) If we serve a document by registered or certified mail, it is considered served when mailed.</P> <P>(ii) An official United States Postal Service receipt from the registered or certified mailing is proof of service.</P> <P>(iii) We may serve a person's authorized representative or agent by registered or certified mail, or in any other manner authorized by law. Service on a person's authorized agent is the same as service on the person.</P> <P>(2) Personal service.</P> <P>(3) Publication in the <E T="04">Federal Register.</E> </P> <P>(b) <E T="03">Service by others.</E> If you are required under this subchapter to serve a person with a document, serve the document by one of the following methods, except where a different method of service is specifically required:</P> <P>(1) Registered or certified mail.</P> <P>(i) If you serve a document by registered or certified mail, it is considered served when mailed.</P> <P>(ii) An official United States Postal Service receipt from the registered or certified mailing is proof of service.</P> <P>(iii) You may serve a person's authorized representative or agent by registered or certified mail or in any other manner authorized by law. Service on a person's authorized agent is the same as service on the person.</P> <P>(2) Personal service.</P> <P>(3) Electronic service.</P> <P>(i) In a proceeding under § 107.317 of this subchapter (an administrative law judge proceeding), you may electronically serve documents on us.</P> <P>(ii) Serve documents electronically through the Internet at <E T="03">http://www.regulations.gov.</E> </P> <CITA>[67 FR 42951, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 105.40</SECTNO> <SUBJECT>Designated agents for non-residents.</SUBJECT> <P>(a) <E T="03">General requirement.</E> If you are not a resident of the United States but are required by this subchapter or subchapter C of this chapter to designate a permanent resident of the United States to act as your agent and receive documents on your behalf, you must prepare a designation and file it with us.</P> <P>(b) <E T="03">Agents.</E> An agent, also known as “agent for service of process”:</P> <P>(1) May be an individual, a firm, or a domestic corporation.</P> <P>(2) May represent any number of principals.</P> <P>(3) May not reassign responsibilities under a designation to another person.</P> <P>(c) <E T="03">Preparing a designation.</E> Your designation must be written and dated, and it must contain the following information:</P> <P>(1) The section in the HMR that requires you to file a designation.</P> <P>(2) A certification that the designation is in the correct legal form required to make it valid and binding on you under the laws, corporate bylaws, and other requirements that apply to designations at the time and place you are making the designation.</P> <P>(3) Your full legal name, the principal name of your business, and your mailing address.</P> <P>(4) A statement that your designation will remain in effect until you withdraw or replace it.</P> <P>(5) The legal name and mailing address of your agent.</P> <P>(6) A declaration of acceptance signed by your agent.</P> <P>(d) <E T="03">Address</E>. Send your designation to: Office of Hazardous Materials Special Permits and Approvals, Pipeline and Hazardous Materials Safety Administration, Attn: PHH-30, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.<PRTPAGE P="12"/> </P> <P>(e) <E T="03">Designations are binding.</E> You are bound by your designation of an agent, even if you did not follow all the requirements in this section, until we reject your designation.</P> <CITA>[67 FR 42951, June 25, 2002, as amended at 70 FR 56088, Sept. 23, 2005; 70 FR 73159, Dec. 9, 2005; 72 FR 55682, Oct. 1, 2007; 75 FR 27211, May 14, 2010]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Subpoenas</HD> <SECTION> <SECTNO>§ 105.45</SECTNO> <SUBJECT>Issuing a subpoena.</SUBJECT> <P>(a) <E T="03">Subpoenas explained.</E> A subpoena is a document that may require you to attend a proceeding, produce documents or other physical evidence in your possession or control, or both. PHMSA may issue a subpoena either on its initiative or at the request of someone participating in a proceeding. Anyone who requests that PHMSA issue a subpoena must show that the subpoena seeks information that will materially advance the proceeding.</P> <P>(b) <E T="03">Attendance and mileage expenses.</E> (1) If you receive a subpoena to attend a proceeding under this part, you may receive money to cover attendance and mileage expenses. The attendance and mileage fees will be the same as those paid to a witness in a proceeding in the district courts of the United States.</P> <P>(2) If PHMSA issues a subpoena to you based upon a request, the requester must serve a copy of the original subpoena on you, as required in § 105.50. The requester must also include attendance and mileage fees with the subpoena unless the requester asks PHMSA to pay the attendance and mileage fees because of demonstrated financial hardship and PHMSA agrees to do so.</P> <P>(3) If PHMSA issues a subpoena at the request of an officer or agency of the Federal government, the officer or agency is not required to include attendance and mileage fees when serving the subpoena. The officer or agency must pay the fees before you leave the hearing at which you testify.</P> </SECTION> <SECTION> <SECTNO>§ 105.50</SECTNO> <SUBJECT>Serving a subpoena.</SUBJECT> <P>(a) <E T="03">Personal service.</E> Anyone who is not an interested party and who is at least 18 years of age may serve you with a subpoena and fees by handing the subpoena and fees to you, by leaving them at your office with the individual in charge, or by leaving them at your house with someone who lives there and is capable of making sure that you receive them. If PHMSA issues a subpoena to an entity, rather than an individual, personal service is made by delivering the subpoena and fees to the entity's registered agent for service of process or to any officer, director or agent in charge of any of the entity's offices.</P> <P>(b) <E T="03">Service by mail.</E> You may be served with a copy of a subpoena and fees by certified or registered mail at your last known address. Service of a subpoena and fees may also be made by registered or certified mail to your agent for service of process or any of your representatives at that person's last known address.</P> <P>(c) <E T="03">Other methods.</E> You may be served with a copy of a subpoena by any method where you receive actual notice of the subpoena and receive the fees before leaving the hearing at which you testify.</P> <P>(d) <E T="03">Filing after service.</E> After service is complete, the individual who served a copy of a subpoena and fees must file the original subpoena and a certificate of service with the PHMSA official who is responsible for conducting the hearing.</P> </SECTION> <SECTION> <SECTNO>§ 105.55</SECTNO> <SUBJECT>Refusal to obey a subpoena.</SUBJECT> <P>(a) <E T="03">Quashing or modifying a subpoena.</E> If you receive a subpoena, you can ask PHMSA to overturn (“quash”) or modify the subpoena within 10 days after the subpoena is served on you. Your request must briefly explain the reasons you are asking for the subpoena to be quashed or modified. PHMSA may then do the following:</P> <P>(1) Deny your request.</P> <P>(2) Quash or modify the subpoena.</P> <P>(3) Grant your request on the condition that you satisfy certain specified requirements.</P> <P>(b) <E T="03">Failure to obey.</E> If you disobey a subpoena, PHMSA may ask the Attorney General to seek help from the United States District Court for the appropriate District to compel you, after notice, to appear before PHMSA and give testimony, produce subpoenaed documents or physical evidence, or both.</P> </SECTION> </SUBJGRP> </SUBPART> </PART> <PART> <PRTPAGE P="13"/> <EAR>Pt. 106</EAR> <HD SOURCE="HED">PART 106—RULEMAKING PROCEDURES</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—PHMSA Rulemaking Documents</HD> <SECHD>Sec.</SECHD> <SECTNO>106.5</SECTNO> <SUBJECT>Defined terms used in this subpart.</SUBJECT> <SECTNO>106.10</SECTNO> <SUBJECT>Process for issuing rules.</SUBJECT> <SECTNO>106.15</SECTNO> <SUBJECT>Advance notice of proposed rulemaking.</SUBJECT> <SECTNO>106.20</SECTNO> <SUBJECT>Notice of proposed rulemaking.</SUBJECT> <SECTNO>106.25</SECTNO> <SUBJECT>Revising regulations without first issuing an ANPRM or NPRM.</SUBJECT> <SECTNO>106.30</SECTNO> <SUBJECT>Final rule.</SUBJECT> <SECTNO>106.35</SECTNO> <SUBJECT>Interim final rule.</SUBJECT> <SECTNO>106.40</SECTNO> <SUBJECT>Direct final rule.</SUBJECT> <SECTNO>106.45</SECTNO> <SUBJECT>Tracking rulemaking actions.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Participating in the Rulemaking Process</HD> <SECTNO>106.50</SECTNO> <SUBJECT>Defined terms used in this subpart.</SUBJECT> <SECTNO>106.55</SECTNO> <SUBJECT>Public participation in the rulemaking process.</SUBJECT> <SUBJGRP> <HD SOURCE="HED">Written Comments</HD> <SECTNO>106.60</SECTNO> <SUBJECT>Filing comments.</SUBJECT> <SECTNO>106.65</SECTNO> <SUBJECT>Required information for written comments.</SUBJECT> <SECTNO>106.70</SECTNO> <SUBJECT>Where and when to file comments.</SUBJECT> <SECTNO>106.75</SECTNO> <SUBJECT>Extension of time to file comments.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Public Meetings and Other Proceedings</HD> <SECTNO>106.80</SECTNO> <SUBJECT>Public meeting procedures.</SUBJECT> <SECTNO>106.85</SECTNO> <SUBJECT>Requesting a public meeting.</SUBJECT> <SECTNO>106.90</SECTNO> <SUBJECT>Other rulemaking proceedings.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Petitions for Rulemaking</HD> <SECTNO>106.95</SECTNO> <SUBJECT>Requesting a change to the regulations.</SUBJECT> <SECTNO>106.100</SECTNO> <SUBJECT>Required information for a petition for rulemaking.</SUBJECT> <SECTNO>106.105</SECTNO> <SUBJECT>PHMSA response to a petition for rulemaking.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Appeals</HD> <SECTNO>106.110</SECTNO> <SUBJECT>Appealing a PHMSA action.</SUBJECT> <SECTNO>106.115</SECTNO> <SUBJECT>Required information for an appeal.</SUBJECT> <SECTNO>106.120</SECTNO> <SUBJECT>Appeal deadline.</SUBJECT> <SECTNO>106.125</SECTNO> <SUBJECT>Filing an appeal.</SUBJECT> <SECTNO>106.130</SECTNO> <SUBJECT>PHMSA response to an appeal.</SUBJECT> </SUBJGRP> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>49 U.S.C. 5101-5127; 49 CFR 1.53.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>67 FR 42954, June 25, 2002, unless otherwise noted.</P> </SOURCE> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to part 106 appear at 70 FR 56088, Sept. 23, 2005.</P> </EDNOTE> <SUBPART> <HD SOURCE="HED">Subpart A—PHMSA Rulemaking Documents</HD> <SECTION> <SECTNO>§ 106.5</SECTNO> <SUBJECT>Defined terms used in this subpart.</SUBJECT> <P>The following defined terms (see part 105, subpart A, of this subchapter) appear in this subpart: File; Person; State.</P> </SECTION> <SECTION> <SECTNO>§ 106.10</SECTNO> <SUBJECT>Process for issuing rules.</SUBJECT> <P>(a) PHMSA (“we”) uses informal rulemaking procedures under the Administrative Procedure Act (5 U.S.C. 553) to add, amend, or delete regulations. To propose or adopt changes to a regulation, PHMSA may issue one or more of the following documents. We publish the following rulemaking documents in the <E T="04">Federal Register</E> unless we name and personally serve a copy of a rule on every person subject to it:</P> <P>(1) An advance notice of proposed rulemaking.</P> <P>(2) A notice of proposed rulemaking.</P> <P>(3) A final rule.</P> <P>(4) An interim final rule.</P> <P>(5) A direct final rule.</P> <P>(b) Each of the rulemaking documents in paragraph (a) of this section generally contains the following information:</P> <P>(1) The topic involved in the rulemaking document.</P> <P>(2) PHMSA's legal authority for issuing the rulemaking document.</P> <P>(3) How interested persons may participate in the rulemaking proceeding (for example, by filing written comments or making oral presentations).</P> <P>(4) Whom to call if you have questions about the rulemaking document.</P> <P>(5) The date, time, and place of any public meetings being held to discuss the rulemaking document.</P> <P>(6) The docket number and regulation identifier number (RIN) for the rulemaking proceeding.</P> <CITA>[67 FR 42954, June 25, 2002, as amended at 70 FR 56088, Sept. 23, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 106.15</SECTNO> <SUBJECT>Advance notice of proposed rulemaking.</SUBJECT> <P>An advance notice of proposed rulemaking (ANPRM) tells the public that PHMSA is considering an area for rulemaking and requests written comments on the appropriate scope of the rulemaking or on specific topics. An <PRTPAGE P="14"/>advance notice of proposed rulemaking may or may not include the text of potential changes to a regulation.</P> </SECTION> <SECTION> <SECTNO>§ 106.20</SECTNO> <SUBJECT>Notice of proposed rulemaking.</SUBJECT> <P>A notice of proposed rulemaking (NPRM) contains PHMSA's specific proposed regulatory changes for public comment and contains supporting information. It generally includes proposed regulatory text.</P> </SECTION> <SECTION> <SECTNO>§ 106.25</SECTNO> <SUBJECT>Revising regulations without first issuing an ANPRM or NPRM.</SUBJECT> <P>PHMSA may add, amend, or delete regulations without first issuing an ANPRM or NPRM in the following situations:</P> <P>(a) We may go directly to a final rule or interim final rule if, for good cause, we find that a notice of proposed rulemaking is impracticable, unnecessary, or contrary to the public interest. We must place that finding and a brief statement of the reasons for it in the final rule or interim final rule.</P> <P>(b) We may issue a direct final rule (see § 106.40).</P> </SECTION> <SECTION> <SECTNO>§ 106.30</SECTNO> <SUBJECT>Final rule.</SUBJECT> <P>A final rule sets out new regulatory requirements and their effective date. A final rule will also identify issues raised by commenters in response to the notice of proposed rulemaking and give the agency's response.</P> </SECTION> <SECTION> <SECTNO>§ 106.35</SECTNO> <SUBJECT>Interim final rule.</SUBJECT> <P>An interim final rule is issued without first issuing a notice of proposed rulemaking and accepting public comments and sets out new regulatory requirements and their effective date. PHMSA may issue an interim final rule if it finds, for good cause, that notice and public procedure are impracticable, unnecessary, or contrary to the public interest. PHMSA will clearly set out this finding in the interim final rule. After receiving and reviewing public comments, as well as any other relevant documents, PHMSA may revise the interim final rule and then issue a final rule.</P> </SECTION> <SECTION> <SECTNO>§ 106.40</SECTNO> <SUBJECT>Direct final rule.</SUBJECT> <P>A direct final rule makes regulatory changes and states that the regulatory changes will take effect on a specified date unless PHMSA receives an adverse comment or notice of intent to file an adverse comment within the comment period—generally 60 days after the direct final rule is published in the <E T="04">Federal Register.</E> </P> <P>(a) <E T="03">Actions taken by direct final rule.</E> We may use direct final rulemaking procedures to issue rules that do any of the following:</P> <P>(1) Make minor substantive changes to regulations.</P> <P>(2) Incorporate by reference the latest edition of technical or industry standards.</P> <P>(3) Extend compliance dates.</P> <P>(4) Make noncontroversial changes to regulations. We must determine and publish a finding that use of direct final rulemaking, in this situation, is in the public interest and unlikely to result in adverse comment.</P> <P>(b) <E T="03">Adverse comment.</E> An adverse comment explains why a rule would be inappropriate, or would be ineffective or unacceptable without a change. It may challenge the rule's underlying premise or approach. Under the direct final rule process, we do not consider the following types of comments to be adverse:</P> <P>(1) A comment recommending another rule change, in addition to the change in the direct final rule at issue, unless the commenter states why the direct final rule would be ineffective without the change.</P> <P>(2) A frivolous or irrelevant comment.</P> <P>(c) <E T="03">Confirmation of effective date.</E> We will publish a confirmation document in the <E T="04">Federal Register,</E> generally within 15 days after the comment period closes, if we have not received an adverse comment or notice of intent to file an adverse comment. The confirmation document tells the public the effective date of the rule—either the date stated in the direct final rule or at least 30 days after the publication date of the confirmation document, whichever is later.</P> <P>(d) <E T="03">Withdrawing a direct final rule.</E> (1) If we receive an adverse comment or notice of intent to file an adverse comment, we will publish a document in <PRTPAGE P="15"/>the <E T="04">Federal Register</E> before the effective date of the direct final rule advising the public and withdrawing the direct final rule in whole or in part.</P> <P>(2) If we withdraw a direct final rule because of an adverse comment, we may incorporate the adverse comment into a later direct final rule or may publish a notice of proposed rulemaking.</P> <P>(e) <E T="03">Appeal.</E> You may appeal PHMSA's issuance of a direct final rule (see § 106.115) only if you have previously filed written comments (see § 106.60) to the direct final rule.</P> </SECTION> <SECTION> <SECTNO>§ 106.45</SECTNO> <SUBJECT>Tracking rulemaking actions.</SUBJECT> <P>The following identifying numbers allow you to track PHMSA's rulemaking activities:</P> <P>(a) <E T="03">Docket number.</E> We assign an identifying number, called a docket number, to each rulemaking proceeding. Each rulemaking document that PHMSA issues in a particular rulemaking proceeding will display the same docket number. This number allows you to do the following:</P> <P>(1) Associate related documents that appear in the <E T="04">Federal Register</E>.</P> <P>(2) Search the DOT Docket Management System (“DMS”) for information on particular rulemaking proceedings—including notices of proposed rulemaking, public comments, petitions for rulemaking, appeals, records of additional rulemaking proceedings and final rules. There are two ways you can search the DMS:</P> <P>(i) Visit the public docket room and review and copy any docketed materials during regular business hours. The DOT Docket Management System is located at the U.S. Department of Transportation, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(ii) View and download docketed materials through the Internet at <E T="03">http://www.regulations.gov</E>.</P> <P>(b) <E T="03">Regulation identifier number.</E> The Department of Transportation publishes a semiannual agenda of all current and projected Department of Transportation rulemakings, reviews of existing regulations, and completed actions. This semiannual agenda appears in the Unified Agenda of Federal Regulations that is published in the <E T="04">Federal Register</E> in April and October of each year. The semiannual agenda tells the public about the Department's—including PHMSA's—regulatory activities. The Department assigns a regulation identifier number (RIN) to each individual rulemaking proceeding in the semiannual agenda. This number appears on all rulemaking documents published in the <E T="04">Federal Register</E> and makes it easy for you to track those rulemaking proceedings in both the <E T="04">Federal Register</E> and the semiannual regulatory agenda itself, as well as to locate all documents in the Docket Management System pertaining to a particular rulemaking.</P> <CITA>[70 FR 56088, Sept. 23, 2005, as amended at 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Participating in the Rulemaking Process</HD> <SECTION> <SECTNO>§ 106.50</SECTNO> <SUBJECT>Defined terms used in this subpart.</SUBJECT> <P>The following defined terms (see part 105, subpart A, of this subchapter) appear in this subpart: File; Person; Political subdivision; State.</P> </SECTION> <SECTION> <SECTNO>§ 106.55</SECTNO> <SUBJECT>Public participation in the rulemaking process.</SUBJECT> <P>You may participate in PHMSA's rulemaking process by doing any of the following:</P> <P>(a) File written comments on any rulemaking document that asks for comments, including an advance notice of proposed rulemaking, notice of proposed rulemaking, interim final rule, or direct final rule.</P> <P>(b) Ask that we hold a public meeting in any rulemaking proceeding and participate in any public meeting that we hold.</P> <P>(c) File a petition for rulemaking that asks us to add, amend, or delete a regulation.</P> <P>(d) File an appeal that asks us to reexamine our decision to issue all or part of a final rule, interim final rule, or direct final rule.</P> </SECTION> <SUBJGRP> <PRTPAGE P="16"/> <HD SOURCE="HED">Written Comments</HD> <SECTION> <SECTNO>§ 106.60</SECTNO> <SUBJECT>Filing comments.</SUBJECT> <P>Anyone may file written comments about proposals made in any rulemaking document that requests public comments, including any State government agency, any political subdivision of a State, and any interested person invited by PHMSA to participate in the rulemaking process.</P> </SECTION> <SECTION> <SECTNO>§ 106.65</SECTNO> <SUBJECT>Required information for written comments.</SUBJECT> <P>Your comments must be in English and must contain the following:</P> <P>(a) The docket number of the rulemaking document you are commenting on, clearly set out at the beginning of your comments.</P> <P>(b) Information, views, or arguments that follow the instructions for participation that appear in the rulemaking document on which you are commenting.</P> <P>(c) All material that is relevant to any statement of fact in your comments.</P> <P>(d) The document title and page number of any material that you reference in your comments.</P> </SECTION> <SECTION> <SECTNO>§ 106.70</SECTNO> <SUBJECT>Where and when to file comments.</SUBJECT> <P>(a) Unless you are told to do otherwise in the rulemaking document on which you are commenting, send your comments to us in either of the following ways:</P> <P>(1) By mail to: Docket Management System, U.S. Department of Transportation, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(2) Through the Internet at <E T="03">http://www.regulations.gov</E>.</P> <P>(b) Make sure that your comments reach us by the deadline set out in the rulemaking document on which you are commenting. We will consider late filed comments to the extent possible.</P> <P>(c) We may reject comments that are not relevant to the rulemaking. We may reject comments you file electronically if you do not follow the electronic filing instructions at the DOT Web site.</P> <CITA>[67 FR 42954, June 25, 2002, as amended at 69 FR 54044, Sept. 7, 2004; 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 106.75</SECTNO> <SUBJECT>Extension of time to file comments.</SUBJECT> <P>You may ask for more time to file comments on a rulemaking proceeding. If PHMSA grants your request, it is granted to all persons. We will notify the public of the extension by publishing a document in the <E T="04">Federal Register.</E> If PHMSA denies your request, PHMSA will notify you of the denial. To ask for more time, you must do the following:</P> <P>(a) File a request for extension at least ten days before the end of the comment period established in the rulemaking document.</P> <P>(b) Show that you have good cause for the extension and that an extension is in the public interest.</P> <P>(c) Include the docket number of the rulemaking document you are seeking additional time to comment on, clearly set out at the beginning of your request.</P> <P>(d) Send your request to: Docket Management System, U.S. Department of Transportation, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <CITA>[67 FR 42954, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Public Meetings and Other Proceedings</HD> <SECTION> <SECTNO>§ 106.80</SECTNO> <SUBJECT>Public meeting procedures.</SUBJECT> <P>A public meeting is a non-adversarial, fact-finding proceeding conducted by a PHMSA representative. Generally, public meetings are announced in the <E T="04">Federal Register.</E> Interested persons are invited to attend and to present their views to the agency on specific issues. There are no formal pleadings and no adverse parties, and any regulation issued afterward is not necessarily based exclusively on the record of the meeting. Sections 556 and 557 of the Administrative Procedure Act (5 U.S.C. 556 and 557) do not apply to public meetings under this part.</P> </SECTION> <SECTION> <PRTPAGE P="17"/> <SECTNO>§ 106.85</SECTNO> <SUBJECT>Requesting a public meeting.</SUBJECT> <P>(a) You may ask for a public meeting by filing a written request with PHMSA no later than 20 days before the expiration of the comment period specified in the rulemaking document. Send your request for a public meeting to: Docket Management System, U.S. Department of Transportation, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(b) PHMSA will review your request and, if you have shown good cause for a public meeting, we will grant it and publish a notice of the meeting in the <E T="04">Federal Register</E>.</P> <CITA>[67 FR 42954, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 106.90</SECTNO> <SUBJECT>Other rulemaking proceedings.</SUBJECT> <P>During a rulemaking proceeding, PHMSA may invite you to do the following:</P> <P>(a) Participate in a conference at which minutes are taken.</P> <P>(b) Make an oral presentation.</P> <P>(c) Participate in any other public proceeding to ensure that PHMSA makes informed decisions during the rulemaking process and to protect the public interest, including a negotiated rulemaking or work group led by a facilitator.</P> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Petitions for Rulemaking</HD> <SECTION> <SECTNO>§ 106.95</SECTNO> <SUBJECT>Requesting a change to the regulations.</SUBJECT> <P>You may ask PHMSA to add, amend, or delete a regulation by filing a petition for rulemaking as follows:</P> <P>(a) For regulations in 49 CFR parts 110, 130, 171 through 180, submit the petition to: Office of Hazardous Materials Standards, Pipeline and Hazardous Materials Safety Administration, Attn: PHH-10, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(b) For regulations in 49 CFR parts 105, 106, or 107, submit the petition to: Office of the Chief Counsel, Pipeline and Hazardous Materials Safety Administration, Attn: PHC-10, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <CITA>[70 FR 56089, Sept. 23, 2005, as amended at 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 106.100</SECTNO> <SUBJECT>Required information for a petition for rulemaking.</SUBJECT> <P>(a) You must include the following information in your petition for rulemaking:</P> <P>(1) A summary of your proposed action and an explanation of its purpose.</P> <P>(2) The language you propose for a new or amended rule, or the language you would delete from a current rule.</P> <P>(3) An explanation of your interest in your proposed action and the interest of anyone you may represent.</P> <P>(4) Information and arguments that support your proposed action, including relevant technical and scientific data available to you.</P> <P>(5) Any specific cases that support or demonstrate the need for your proposed action.</P> <P>(b) If the impact of your proposed action is substantial, and data or other information about that impact are available to you, we may ask that you provide information about the following:</P> <P>(1) The costs and benefits of your proposed action to society in general, and identifiable groups within society in particular.</P> <P>(2) The direct effects, including preemption effects under section 5125 of Federal hazardous materials transportation law, of your proposed action on States, on the relationship between the Federal government and the States, and on the distribution of power and responsibilities among the various levels of government. (See 49 CFR part 107, subpart C, regarding preemption.)</P> <P>(3) The regulatory burden of your proposed action on small businesses, small organizations, small governmental jurisdictions, and Indian tribes.</P> <P>(4) The recordkeeping and reporting burdens of your proposed action and whom they would affect.</P> <P>(5) The effect of your proposed action on the quality of the natural and social environments.</P> </SECTION> <SECTION> <PRTPAGE P="18"/> <SECTNO>§ 106.105</SECTNO> <SUBJECT>PHMSA response to a petition for rulemaking.</SUBJECT> <P>We will review and respond to your petition for rulemaking as follows:</P> <GPOTABLE CDEF="s37,r47,r58" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">If your petition is . . .</CHED> <CHED H="1">And if we <LI>determine </LI> <LI>that . . .</LI> </CHED> <CHED H="1">Then . . .</CHED> </BOXHD> <ROW RUL="s"> <ENT I="01">(a) Incomplete</ENT> <ENT/> <ENT>We may return your petition with a written explanation.</ENT> </ROW> <ROW RUL="s"> <ENT I="01">(b) Complete</ENT> <ENT>Your petition does not justify a rulemaking action</ENT> <ENT>We will notify you in writing that we will not start a rulemaking proceeding.</ENT> </ROW> <ROW> <ENT I="01">(c) Complete</ENT> <ENT>Your petition does justify a rulemaking action</ENT> <ENT>We will notify you in writing that we will start a rulemaking proceeding.</ENT> </ROW> </GPOTABLE> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Appeals</HD> <SECTION> <SECTNO>§ 106.110</SECTNO> <SUBJECT>Appealing a PHMSA Action.</SUBJECT> <P>You may appeal the following PHMSA actions:</P> <P>(a) PHMSA's issuance of a final rule or PHMSA's withdrawal of a notice of proposed rulemaking under the rulemaking procedures in this part. However, you may appeal PHMSA's issuance of a direct final rule only if you previously filed comments to the direct final rule (see § 106.40(e)).</P> <P>(b) Any PHMSA decision on a petition for rulemaking.</P> </SECTION> <SECTION> <SECTNO>§ 106.115</SECTNO> <SUBJECT>Required information for an appeal.</SUBJECT> <P>(a) <E T="03">Appeal of a final rule or withdrawal of a notice of proposed rulemaking.</E> If you appeal PHMSA's issuance of a final rule or PHMSA's withdrawal of a notice of proposed rulemaking, your appeal must include the following:</P> <P>(1) The docket number of the rulemaking you are concerned about, clearly set out at the beginning of your appeal.</P> <P>(2) A brief statement of your concern about the final rule or the withdrawal of notice of proposed rulemaking at issue.</P> <P>(3) An explanation of why compliance with the final rule is not practical, reasonable, or in the public interest.</P> <P>(4) If you want PHMSA to consider more facts, the reason why you did not present those facts within the time given during the rulemaking process for public comment.</P> <P>(b) <E T="03">Appeal of a decision.</E> If you appeal PHMSA's decision on a petition for rulemaking, you must include the following:</P> <P>(1) The contested aspects of the decision.</P> <P>(2) Any new arguments or information.</P> </SECTION> <SECTION> <SECTNO>§ 106.120</SECTNO> <SUBJECT>Appeal deadline.</SUBJECT> <P>(a) <E T="03">Appeal of a final rule or withdrawal of a notice of proposed rulemaking.</E> If you appeal PHMSA's issuance of a final rule or PHMSA's withdrawal of a proposed rulemaking, your appeal document must reach us no later than 30 days after the date PHMSA published the regulation or the withdrawal notice in the <E T="04">Federal Register.</E> After that time, PHMSA will consider your appeal to be a petition for rulemaking under § 106.100.</P> <P>(b) <E T="03">Appeal of a decision.</E> If you appeal PHMSA's decision on a petition for rulemaking, your appeal document must reach us no later than 30 days from the date PHMSA served you with written notice of PHMSA's decision.</P> <CITA>[70 FR 56089, Sept. 23, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 106.125</SECTNO> <SUBJECT>Filing an appeal.</SUBJECT> <P>Send your appeal to: Docket Management System, U.S. Department of Transportation, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <CITA>[67 FR 42954, June 25, 2002, as amended at 72 FR 55682, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 106.130</SECTNO> <SUBJECT>PHMSA response to an appeal.</SUBJECT> <P>Unless PHMSA provides otherwise, filing an appeal will not keep a final rule from becoming effective. We will handle an appeal according to the following procedures:</P> <P>(a) <E T="03">Appeal of a final rule or withdrawal of a notice of proposed rulemaking.</E> (1) We may consolidate your appeal with other appeals of the same rule.</P> <P>(2) We may grant or deny your appeal, in whole or in part, without further rulemaking proceedings, unless granting your appeal would result in the issuance of a new final rule.<PRTPAGE P="19"/> </P> <P>(3) If we decide to grant your appeal, we may schedule further proceedings and an opportunity to comment.</P> <P>(4) PHMSA will notify you, in writing, of the action on your appeal within 90 days after the date that PHMSA published the final rule or withdrawal of notice of proposed rulemaking at issue in the <E T="04">Federal Register.</E> If we do not issue a decision on your appeal within the 90-day period and we anticipate a substantial delay, we will notify you directly about the delay and will give you an expected decision date. We will also publish a notice of the delay in the <E T="04">Federal Register.</E> </P> <P>(b) <E T="03">Appeal of a decision.</E> (1) We will not consider your appeal if it merely repeats arguments that PHMSA has previously rejected.</P> <P>(2) PHMSA will notify you, in writing, of the action on your appeal within 90 days after the date that PHMSA served you with written notice of its decision on your petition for rulemaking. If we do not issue a decision on your appeal within the 90-day period, and we anticipate a substantial delay, we will notify you directly about the delay and will give you an expected decision date.</P> </SECTION> </SUBJGRP> </SUBPART> </PART> <PART> <EAR>Pt. 107</EAR> <HD SOURCE="HED">PART 107—HAZARDOUS MATERIALS PROGRAM PROCEDURES</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—Definitions</HD> <SECHD>Sec.</SECHD> <SECTNO>107.1</SECTNO> <SUBJECT>Definitions.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Special Permits</HD> <SECTNO>107.101</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>107.105</SECTNO> <SUBJECT>Application for special permit.</SUBJECT> <SECTNO>107.107</SECTNO> <SUBJECT>Application for party status.</SUBJECT> <SECTNO>107.109</SECTNO> <SUBJECT>Application for renewal.</SUBJECT> <SECTNO>107.111</SECTNO> <SUBJECT>Withdrawal.</SUBJECT> <SECTNO>107.113</SECTNO> <SUBJECT>Application processing and evaluation.</SUBJECT> <SECTNO>107.117</SECTNO> <SUBJECT>Emergency processing.</SUBJECT> <SECTNO>107.121</SECTNO> <SUBJECT>Modification, suspension or termination of special permit or grant of party status.</SUBJECT> <SECTNO>107.123</SECTNO> <SUBJECT>Reconsideration.</SUBJECT> <SECTNO>107.125</SECTNO> <SUBJECT>Appeal.</SUBJECT> <SECTNO>107.127</SECTNO> <SUBJECT>Availability of documents for public inspection.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Preemption</HD> <SECTNO>107.201</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>107.202</SECTNO> <SUBJECT>Standards for determining preemption.</SUBJECT> <SUBJGRP> <HD SOURCE="HED">Preemption Determinations</HD> <SECTNO>107.203</SECTNO> <SUBJECT>Application.</SUBJECT> <SECTNO>107.205</SECTNO> <SUBJECT>Notice.</SUBJECT> <SECTNO>107.207</SECTNO> <SUBJECT>Processing.</SUBJECT> <SECTNO>107.209</SECTNO> <SUBJECT>Determination.</SUBJECT> <SECTNO>107.211</SECTNO> <SUBJECT>Petition for reconsideration.</SUBJECT> <SECTNO>107.213</SECTNO> <SUBJECT>Judicial review.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Waiver of Preemption Determinations</HD> <SECTNO>107.215</SECTNO> <SUBJECT>Application.</SUBJECT> <SECTNO>107.217</SECTNO> <SUBJECT>Notice.</SUBJECT> <SECTNO>107.219</SECTNO> <SUBJECT>Processing.</SUBJECT> <SECTNO>107.221</SECTNO> <SUBJECT>Determination.</SUBJECT> <SECTNO>107.223</SECTNO> <SUBJECT>Petition for reconsideration.</SUBJECT> <SECTNO>107.227</SECTNO> <SUBJECT>Judicial review.</SUBJECT> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Enforcement</HD> <SECTNO>107.301</SECTNO> <SUBJECT>Delegated authority for enforcement.</SUBJECT> <SECTNO>107.303</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>107.305</SECTNO> <SUBJECT>Investigations.</SUBJECT> <SUBJGRP> <HD SOURCE="HED">Compliance Orders and Civil Penalties</HD> <SECTNO>107.307</SECTNO> <SUBJECT>General.</SUBJECT> <SECTNO>107.309</SECTNO> <SUBJECT>Warning letters.</SUBJECT> <SECTNO>107.310</SECTNO> <SUBJECT>Ticketing.</SUBJECT> <SECTNO>107.311</SECTNO> <SUBJECT>Notice of probable violation.</SUBJECT> <SECTNO>107.313</SECTNO> <SUBJECT>Reply.</SUBJECT> <SECTNO>107.315</SECTNO> <SUBJECT>Admission of violations.</SUBJECT> <SECTNO>107.317</SECTNO> <SUBJECT>Informal response.</SUBJECT> <SECTNO>107.319</SECTNO> <SUBJECT>Request for a hearing.</SUBJECT> <SECTNO>107.321</SECTNO> <SUBJECT>Hearing.</SUBJECT> <SECTNO>107.323</SECTNO> <SUBJECT>ALJ's decision.</SUBJECT> <SECTNO>107.325</SECTNO> <SUBJECT>Appeals.</SUBJECT> <SECTNO>107.327</SECTNO> <SUBJECT>Compromise and settlement.</SUBJECT> <SECTNO>107.329</SECTNO> <SUBJECT>Maximum penalties.</SUBJECT> <SECTNO>107.331</SECTNO> <SUBJECT>Assessment considerations.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Criminal Penalties</HD> <SECTNO>107.333</SECTNO> <SUBJECT>Criminal penalties generally.</SUBJECT> <SECTNO>107.335</SECTNO> <SUBJECT>Referral for prosecution.</SUBJECT> <SECTNO>107.336</SECTNO> <SUBJECT>Limitation on fines and penalties.</SUBJECT> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Injunctive Action</HD> <SECTNO>107.337</SECTNO> <SUBJECT>Injunctions generally.</SUBJECT> <SECTNO>107.339</SECTNO> <SUBJECT>Imminent hazards.</SUBJECT> <APP>Appendix A to Subpart D of Part 107—Guidelines for Civil Penalties</APP> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—Designation of Approval and Certification Agencies</HD> <SECTNO>107.401</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>107.402</SECTNO> <SUBJECT>Application for designation as an approval or certification agency.</SUBJECT> <SECTNO>107.403</SECTNO> <SUBJECT>Designation of approval agencies.</SUBJECT> <SECTNO>107.404</SECTNO> <SUBJECT>Conditions of designation.</SUBJECT> <SECTNO>107.405</SECTNO> <SUBJECT>Termination of designation.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart F—Registration of Cargo Tank and Cargo Tank Motor Vehicle Manufacturers, Assemblers, Repairers, Inspectors, Testers, and Design Certifying Engineers</HD> <SECTNO>107.501</SECTNO> <SUBJECT>Scope.<PRTPAGE P="20"/> </SUBJECT> <SECTNO>107.502</SECTNO> <SUBJECT>General registration requirements.</SUBJECT> <SECTNO>107.503</SECTNO> <SUBJECT>Registration statement.</SUBJECT> <SECTNO>107.504</SECTNO> <SUBJECT>Period of registration, updates, and record retention.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart G—Registration of Persons Who Offer or Transport Hazardous Materials</HD> <SECTNO>107.601</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>107.606</SECTNO> <SUBJECT>Exceptions.</SUBJECT> <SECTNO>107.608</SECTNO> <SUBJECT>General registration requirements.</SUBJECT> <SECTNO>107.612</SECTNO> <SUBJECT>Amount of fee.</SUBJECT> <SECTNO>107.616</SECTNO> <SUBJECT>Payment procedures.</SUBJECT> <SECTNO>107.620</SECTNO> <SUBJECT>Recordkeeping requirements.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart H—Approvals, Registrations and Submissions</HD> <SECTNO>107.701</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>107.705</SECTNO> <SUBJECT>Registrations, reports, and applications for approval.</SUBJECT> <SECTNO>107.709</SECTNO> <SUBJECT>Processing of an application for approval, including an application for renewal or modification.</SUBJECT> <SECTNO>107.711</SECTNO> <SUBJECT>Withdrawal.</SUBJECT> <SECTNO>107.713</SECTNO> <SUBJECT>Approval modification, suspension or termination.</SUBJECT> <SECTNO>107.715</SECTNO> <SUBJECT>Reconsideration.</SUBJECT> <SECTNO>107.717</SECTNO> <SUBJECT>Appeal.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart I—Approval of Independent Inspection Agencies, Cylinder Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders</HD> <SECTNO>107.801</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>107.803</SECTNO> <SUBJECT>Approval of an independent inspection agency (IIA).</SUBJECT> <SECTNO>107.805</SECTNO> <SUBJECT>Approval of cylinder and pressure receptacle requalifiers.</SUBJECT> <SECTNO>107.807</SECTNO> <SUBJECT>Approval of non-domestic chemical analyses and tests.</SUBJECT> <SECTNO>107.809</SECTNO> <SUBJECT>Conditions of UN pressure receptacle approvals.</SUBJECT> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>49 U.S.C. 5101-5128, 44701; Pub. L. 101-410 section 4 (28 U.S.C. 2461 note); Pub. L. 104-121 sections 212-213; Pub. L. 104-134 section 31001; 49 CFR 1.45, 1.53.</P> </AUTH> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to part 107 appear at 67 FR 61011, Sept. 27, 2002, 70 FR 56089, Sept. 23, 2005, and 70 FR 73159, Dec. 9, 2005.</P> </EDNOTE> <SUBPART> <HD SOURCE="HED">Subpart A—Definitions</HD> <SECTION> <SECTNO>§ 107.1</SECTNO> <SUBJECT>Definitions. </SUBJECT> <P>All terms defined in 49 U.S.C. 5102 are used in their statutory meaning. Other terms used in this part are defined as follows:</P> <P> <E T="03">Acting knowingly</E> means acting or failing to act while</P> <P>(1) Having actual knowledge of the facts giving rise to the violation, or</P> <P>(2) Having the knowledge that a reasonable person acting in the same circumstances and exercising due care would have had.</P> <P> <E T="03">Administrator</E> means the Administrator, Pipeline and Hazardous Materials Safety Administration or his or her delegate.</P> <P> <E T="03">Applicant</E> means the person in whose name a special permit, approval, registration, a renewed or modified special permit or approval, or party status to a special permit is requested to be issued.</P> <P> <E T="03">Application</E> means a request under subpart B of this part for a special permit, a renewal or modification of a special permit, party status to a special permit, or a request under subpart H of this part for an approval, or renewal or modification of an approval.</P> <P> <E T="03">Approval</E> means written consent, including a competent authority approval, from the Associate Administrator or other designated Department official, to perform a function that requires prior consent under subchapter C of this chapter (49 CFR parts 171 through 180).</P> <P> <E T="03">Approval Agency</E> means an organization or a person designated by the PHMSA to certify packagings as having been designed, manufactured, tested, modified, marked or maintained in compliance with applicable DOT regulations.</P> <P> <E T="03">Associate Administrator</E> means the Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration.</P> <P> <E T="03">Competent Authority</E> means a national agency that is responsible, under its national law, for the control or regulation of some aspect of hazardous materials (dangerous goods) transportation. Another term for Competent Authority is “Appropriate authority,” which is used in the International Civil Aviation Organization's (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air. The Associate Administrator is the United States Competent Authority for purposes of this part 107.</P> <P> <E T="03">Competent Authority Approval</E> means an approval by the competent authority that is required under an international standard (for example, the <PRTPAGE P="21"/>ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air and the International Maritime Dangerous Goods Code). Any of the following may be considered a competent authority approval if it satisfies the requirement of an international standard:</P> <P>(1) A specific regulation in subchapter A or C of this chapter.</P> <P>(2) A special permit or approval issued under subchapter A or C of this chapter.</P> <P>(3) A separate document issued to one or more persons by the Associate Administrator.</P> <P> <E T="03">DOT or Department</E> means U.S. Department of Transportation.</P> <P> <E T="03">Federal hazardous material transportation law</E> means 49 U.S.C. 5101 <E T="03">et seq.</E> </P> <P> <E T="03">Filed</E> means received by the appropriate PHMSA or other designated office within the time specified in a regulation or rulemaking document.</P> <P> <E T="03">Holder</E> means the person in whose name a special permit or approval has been issued.</P> <P> <E T="03">Imminent Hazard</E> means the existence of a condition which presents a substantial likelihood that death, serious illness, severe personal injury, or substantial endangerment to health, property, or the environment may occur before the reasonably foreseeable completion of an administrative hearing or other formal proceeding initiated to abate the risks of those effects.</P> <P> <E T="03">Incident</E> means an event resulting in the unintended and unanticipated release of a hazardous material or an event meeting incident reporting requirements in § 171.15 or § 171.16 of this chapter.</P> <P> <E T="03">Indian Tribe</E> has the same meaning given that term in section 4 of the Indian Self-Determination and Education Assistance Act (25 U.S.C. 450b).</P> <P> <E T="03">Investigation</E> includes investigations authorized under 49 U.S.C. 5121 and inspections authorized under 49 U.S.C. 5118 and 5121.</P> <P> <E T="03">Manufacturing special permit</E> means a special permit from compliance with specified requirements that otherwise must be met before representing, marking, certifying (including requalifying, inspecting, and testing), selling or offering a packaging or container as meeting the requirements of subchapter C of this chapter governing its use in the transportation in commerce of a hazardous material. A manufacturing special permit is a special permit issued to a manufacturer of packagings who does not offer for transportation or transport hazardous materials in packagings subject to the special permit.</P> <P> <E T="03">Party</E> means a person, other than a holder, authorized to act under the terms of a special permit.</P> <P> <E T="03">Person</E> means an individual, firm, copartnership, corporation, company, association, or joint-stock association (including any trustee, receiver, assignee, or similar representative); or a government or Indian tribe (or an agency or instrumentality of any government or Indian tribe) that transports a hazardous material to further a commercial enterprise or offers a hazardous material for transportation in commerce. Person does not include the following:</P> <P>(1) The United States Postal Service.</P> <P>(2) Any agency or instrumentality of the Federal government, for the purposes of 49 U.S.C. 5123 (civil penalties) and 5124 (criminal penalties.)</P> <P>(3) Any government or Indian tribe (or an agency or instrumentality of any government or Indian tribe) that transports hazardous material for a governmental purpose.</P> <P> <E T="03">Registration</E> means a written acknowledgment from the Associate Administrator that a registrant is authorized to perform a function for which registration is required under subchapter C of this chapter (e.g., registration in accordance with 49 CFR 178.503 regarding marking of packagings). For purposes of subparts A through E, “registration” does not include registration under subpart F or G of this part.</P> <P> <E T="03">Report</E> means information, other than an application, registration or part thereof, required to be submitted to the Associate Administrator pursuant to this subchapter, subchapter B or subchapter C of this chapter.</P> <P> <E T="03">Respondent</E> means a person upon whom the PHMSA has served a notice of probable violation.</P> <P> <E T="03">Special permit</E> means a document issued by the Associate Administrator, <PRTPAGE P="22"/>or other designated Department official, under the authority of 49 U.S.C. 5117 permitting a person to perform a function that is not otherwise permitted under subchapters A or C of this chapter, or other regulations issued under 49 U.S.C. 5101 <E T="03">et seq.</E> (e.g., Federal Motor Carrier Safety routing requirements). The terms “special permit” and “exemption” have the same meaning for purposes of subchapters A or C of this chapter or other regulations issued under 49 U.S.C. 5101 through 5128.</P> <P> <E T="03">State</E> means a State of the United States, the District of Columbia, the Commonwealth of Puerto Rico, the Commonwealth of the Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other territory or possession of the United States designated by the Secretary.</P> <P> <E T="03">Transports</E> or <E T="03">transportation</E> means the movement of property and loading, unloading, or storage incidental to the movement.</P> <CITA>[Amdt. 107-3, 41 FR 38170, Sept. 9, 1976]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 107.1, see the List of CFR Sections Affected which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Special Permits</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. 107-38, 61 FR 21095, May 9, 1996, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 107.101</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>This subpart prescribes procedures for the issuance, modification and termination of special permits from requirements of this subchapter, subchapter C of this chapter, or regulations issued under chapter 51 of 49 U.S.C.</P> </SECTION> <SECTION> <SECTNO>§ 107.105</SECTNO> <SUBJECT>Application for special permit.</SUBJECT> <P>(a) <E T="03">General.</E> Each application for a special permit or modification of a special permit must be written in English and submitted for timely consideration at least 120 days before the requested effective date and must—</P> <P>(1)(i) Be submitted in duplicate to: Associate Administrator for Hazardous Materials Safety (Attention: Special Permits, PHH-31), Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;</P> <P>(ii) Be submitted in duplicate with any attached supporting documentation by facsimile (fax) to: (202) 366-3753 or (202) 366-3308; or</P> <P>(iii) Be submitted by electronic mail (e-mail) to: <E T="03">Specialpermits@dot.gov.</E> Electronic submissions need not be submitted in duplicate;</P> <P>(2) State the name, street and mailing addresses, e-mail address (if available), US DOT Registration number (if applicable), and telephone number of the applicant. If the applicant is not an individual, also state the name, street and mailing addresses, e-mail address (if available), and telephone number of an individual designated as an agent of the applicant for all purposes related to the application;</P> <P>(3) Include a designation of agent of service for process in accordance with § 105.40 of this part if the applicant is not a resident of the United States; and</P> <P>(4) For a manufacturing special permit, include a statement of the name and street address of each facility when manufacturing under the special permit will occur.</P> <P>(b) <E T="03">Confidential treatment.</E> To request confidential treatment for information contained in the application, the applicant shall comply with § 105.30(a).</P> <P>(c) <E T="03">Description of special permit proposal.</E> The application must include the following information that is relevant to the special permit proposal:</P> <P>(1) A citation of the specific regulation from which the applicant seeks relief;</P> <P>(2) Specification of the proposed mode or modes of transportation;</P> <P>(3) A detailed description of the proposed special permit (e.g., alternative packaging, test, procedure or activity) including, as appropriate, written descriptions, drawings, flow charts, plans and other supporting documents;</P> <P>(4) A specification of the proposed duration or schedule of events for which the special permit is sought;</P> <P>(5) A statement outlining the applicant's basis for seeking relief from <PRTPAGE P="23"/>compliance with the specified regulations and, if the special permit is requested for a fixed period, a description of how compliance will be achieved at the end of that period;</P> <P>(6) If the applicant seeks emergency processing specified in § 107.117, a statement of supporting facts and reasons;</P> <P>(7) Identification and description of the hazardous materials planned for transportation under the special permit;</P> <P>(8) Description of each packaging, including specification or special permit number, as applicable, to be used in conjunction with the requested special permit;</P> <P>(9) For alternative packagings, documentation of quality assurance controls, package design, manufacture, performance test criteria, in-service performance and service-life limitations.</P> <P>(10) When a Class 1 material is forbidden for transportation by aircraft except under a special permit (see Columns 9A and 9B in the table in 49 CFR 172.101), an applicant for a special permit to transport such Class 1 material on passenger-carrying or cargo-only aircraft with a maximum certificated takeoff weight of less than 12,500 pounds must certify that no person within the categories listed in 18 U.S.C. 842(i) will participate in the transportation of the Class 1 material.</P> <P>(d) <E T="03">Justification of special permit proposal.</E> The application must demonstrate that a special permit achieves a level of safety at least equal to that required by regulation, or if a required safety level does not exist, is consistent with the public interest. At a minimum, the application must provide the following:</P> <P>(1) Information describing all relevant shipping and incident experience of which the applicant is aware that relates to the application;</P> <P>(2) A statement identifying any increased risk to safety or property that may result if the special permit is granted, and a description of the measures to be taken to address that risk; and</P> <P>(3) Either:</P> <P>(i) Substantiation, with applicable analyses, data or test results, that the proposed alternative will achieve a level of safety that is at least equal to that required by the regulation from which the special permit is sought; or</P> <P>(ii) If the regulations do not establish a level of safety, an analysis that identifies each hazard, potential failure mode and the probability of its occurrence, and how the risks associated with each hazard and failure mode are controlled for the duration of an activity or life-cycle of a packaging.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 62 FR 51556, Oct. 1, 1997; 65 FR 50457, Aug. 18, 2000; 65 FR 58618, Sept. 29, 2000; 67 FR 61010, 61011, Sept. 27, 2002; 68 FR 23841, May 5, 2003; 69 FR 6198, Feb. 10, 2004; 70 FR 56089, Sept. 23, 2005; 70 FR 73160, Dec. 9, 2005; 71 FR 54390, Sept. 14, 2006; 72 FR 55683, Oct. 1, 2007; 75 FR 27212, May 14, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.107</SECTNO> <SUBJECT>Application for party status.</SUBJECT> <P>(a) Any person eligible to apply for a special permit may apply to be made party to an application or an existing special permit, other than a manufacturing special permit.</P> <P>(b) Each application filed under this section must—</P> <P>(1)(i) Be submitted in duplicate to: Associate Administrator for Hazardous Materials Safety (Attention: Special Permits, PHH-31), Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;</P> <P>(ii) Be submitted in duplicate with any attached supporting documentation by facsimile (fax) to: (202) 366-3753 or (202) 366-3308; or</P> <P>(iii) Be submitted by electronic mail (e-mail) to: <E T="03">Specialpermits@dot.gov.</E> Electronic submissions need not be submitted in duplicate;</P> <P>(2) Identify by number the special permit application or special permit to which the applicant seeks to become a party;</P> <P>(3) State the name, street and mailing addresses, e-mail address (if available), US DOT Registration number (if applicable), and telephone number of the applicant. If the applicant is not an individual, also state the name, street and mailing addresses, e-mail address (if available), and telephone number of an individual designated as an agent of the applicant for all purposes related <PRTPAGE P="24"/>to the application. In addition, each applicant must state why party status to the special permit is needed and must submit a certification of understanding of the provisions of the special permit to which party status is being requested;</P> <P>(4) Include a designation of agent of service for process in accordance with § 105.40 of this part if the applicant is not a resident of the United States; and</P> <P>(5) For a Class 1 material that is forbidden for transportation by aircraft except under a special permit (see Columns 9A and 9B in the table in 49 CFR 172.101), include a certification by the applicant for party status to a special permit to transport such Class 1 material, on passenger-carrying or cargo-only aircraft with a maximum certificated takeoff weight of less than 12,500 pounds, that no person within the categories listed in 18 U.S.C. 842(i) will participate in the transportation of the Class 1 material.</P> <P>(c) The Associate Administrator grants or denies an application for party status in the manner specified in § 107.113(e) and (f) of this subpart.</P> <P>(d) A party to a special permit is subject to all terms of that special permit, including the expiration date. If a party to a special permit wishes to renew party status, the special permit renewal procedures set forth in § 107.109 apply.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 65 FR 50457, Aug. 18, 2000; 67 FR 61010, 61011, Sept. 27, 2002; 69 FR 6198, Feb. 10, 2004; 70 FR 56090, Sept. 23, 2005; 70 FR 73160, Dec. 9, 2005; 72 FR 55683, Oct. 1, 2007; 75 FR 27212, May 14, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.109</SECTNO> <SUBJECT>Application for renewal.</SUBJECT> <P>(a) Each application for renewal of a special permit or renewal of party status to a special permit must—</P> <P>(1)(i) Be submitted in duplicate to: Associate Administrator for Hazardous Materials Safety (Attention: Special Permits, PHH-31), Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;</P> <P>(ii) Be submitted in duplicate with any attached supporting documentation by facsimile (fax) to: (202) 366-3753 or (202) 366-3308; or</P> <P>(iii) Be submitted by electronic mail (e-mail) to: <E T="03">Specialpermits@dot.gov.</E> Electronic submissions need not be submitted in duplicate;</P> <P>(2) Identify by number the special permit for which renewal is requested;</P> <P>(3) State the name, street and mailing addresses, e-mail address (if available), US DOT Registration number (if applicable), and telephone number of the applicant. If the applicant is not an individual, also state the name, street and mailing addresses, e-mail address (if available), and telephone number of an individual designated as an agent of the applicant for all purposes related to the application. In addition, each applicant for renewal of party status must state why party status to the special permit is needed and must submit a certification of understanding of the provisions of the special permit to which party status is being requested;</P> <P>(4) Include either a certification by the applicant that the original application, as it may have been updated by any application for renewal, remains accurate and complete; or include an amendment to the previously submitted application as is necessary to update and assure the accuracy and completeness of the application, with certification by the applicant that the application as amended is accurate and complete; and</P> <P>(5) Include a statement describing all relevant shipping and incident experience of which the applicant is aware in connection with the special permit since its issuance or most recent renewal. If the applicant is aware of no incidents, the applicant must so certify. When known to the applicant, the statement should indicate the approximate number of shipments made or packages shipped, as the case may be, and number of shipments or packages involved in any loss of contents, including loss by venting other than as authorized in subchapter C; and</P> <P>(6) When a Class 1 material is forbidden for transportation by aircraft, except under a special permit (see Columns 9A and 9B in the table in 49 CFR 172.101), include a certification by the applicant for renewal of party status to a special permit to transport such <PRTPAGE P="25"/>Class 1 material, on passenger-carrying or cargo-only aircraft with a maximum certificated takeoff weight of less than 12,500 pounds, that no person within the categories listed in 18 U.S.C. 842(i) will participate in the transportation of the Class 1 material.</P> <P>(b) If at least 60 days before an existing special permit expires the grantee files an application for renewal that is complete and conforms to the requirements of this section, the special permit will not expire until final administrative action on the application for renewal has been taken.</P> <CITA>[75 FR 27212, May 14, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.111</SECTNO> <SUBJECT>Withdrawal.</SUBJECT> <P>An application may be withdrawn at any time before a decision to grant or deny it is made. Withdrawal of an application does not authorize the removal of any related records from the PHMSA dockets or files. Applications that are eligible for confidential treatment under § 105.30 will remain confidential after the application is withdrawn. The duration of this confidential treatment for trade secrets and commercial or financial information is indefinite, unless the party requesting the confidential treatment of the materials notifies the Associate Administrator that the confidential treatment is no longer required.</P> </SECTION> <SECTION> <SECTNO>§ 107.113</SECTNO> <SUBJECT>Application processing and evaluation.</SUBJECT> <P>(a) The Associate Administrator reviews an application for special permit, modification of special permit, party to special permit, or renewal of an exemption or special permit to determine if it is complete and conforms with the requirements of this subpart. This determination will be made within 30 days of receipt of the application for special permit, modification of special permit, or party to special permit, and within 15 days of receipt of an application for renewal of an exemption or special permit. If an application is determined to be incomplete, the applicant is informed of the reasons.</P> <P>(b) An application, that is not a renewal, party to, or emergency special permit application, and is determined to be complete is docketed. Notice of the application is published in the <E T="04">Federal Register,</E> and an opportunity for public comment is provided. All comments received during the comment period are considered before final action is taken on the application.</P> <P>(c) No public hearing or other formal proceeding is required under this subpart before the disposition of an application. Unless emergency processing under § 107.117 is requested and granted, applications are usually processed in the order in which they are filed.</P> <P>(d) During the processing and evaluation of an application, the Associate Administrator may request additional information from the applicant. If the applicant does not respond to a written request for additional information within 30 days of the date the request was received, the application may be deemed incomplete and denied. However, if the applicant responds in writing within the 30-day period requesting an additional 30 days within which it will gather the requested information, the Associate Administrator may grant the 30-day extension.</P> <P>(e) The Associate Administrator may grant or deny an application, in whole or in part. In the Associate Administrator's discretion, an application may be granted subject to provisions that are appropriate to protect health, safety or property. The Associate Administrator may impose additional provisions not specified in the application or remove conditions in the application that are unnecessary.</P> <P>(f) The Associate Administrator may grant an application on finding that—</P> <P>(1) The application complies with this subpart;</P> <P>(2) The application demonstrates that the proposed alternative will achieve a level of safety that:</P> <P>(i) Is at least equal to that required by the regulation from which the special permit is sought, or</P> <P>(ii) If the regulations do not establish a level of safety, is consistent with the public interest and adequately will protect against the risks to life and property inherent in the transportation of hazardous materials in commerce;</P> <P>(3) The application states all material facts, and contains no materially false or materially misleading statement;<PRTPAGE P="26"/> </P> <P>(4) The applicant meets the qualifications required by applicable regulations; and</P> <P>(5) The applicant is fit to conduct the activity authorized by the exemption or special permit. This assessment may be based on information in the application, prior compliance history of the applicant, and other information available to the Associate Administrator.</P> <P>(g) An applicant is notified in writing whether the application is granted or denied. A denial contains a brief statement of reasons.</P> <P>(h) The initial exemption or special permit terminates according to its terms or, if not otherwise specified, 24 months from the date of issuance. A subsequent renewal of a special permit terminates according to its terms or, if not otherwise specified, 48 months after the date of issuance. A grant of party status to an exemption or special permit, unless otherwise stated, terminates on the date that the exemption or special permit expires.</P> <P>(i) The Associate Administrator, on determining that an application concerns a matter of general applicability and future effect and should be the subject of rulemaking, may initiate rulemaking under part 106 of this chapter in addition to or instead of acting on the application.</P> <P>(j) The Associate Administrator publishes in the <E T="04">Federal Register</E> a list of all special permit grants, denials, and modifications and all special permit applications withdrawn under this section.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 67 FR 61011, Sept. 27, 2002; 70 FR 73161, Dec. 9, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.117</SECTNO> <SUBJECT>Emergency processing.</SUBJECT> <P>(a) An application is granted emergency processing if the Associate Administrator, on the basis of the application and any inquiry undertaken, finds that—</P> <P>(1) Emergency processing is necessary to prevent significant injury to persons or property (other than the hazardous material to be transported) that could not be prevented if the application were processed on a routine basis; or</P> <P>(2) Emergency processing is necessary for immediate national security purposes or to prevent significant economic loss that could not be prevented if the application were processed on a routine basis.</P> <P>(b) Where the significant economic loss is to the applicant, or to a party in a contractual relationship to the applicant with respect to the activity to be undertaken, the Associate Administrator may deny emergency processing if timely application could have been made.</P> <P>(c) A request for emergency processing on the basis of potential economic loss must reasonably describe and estimate the potential loss.</P> <P>(d) An application submitted under this section must conform to § 107.105 to the extent that the receiving Department official deems necessary to process the application. An application on an emergency basis must be submitted to the Department modal contact official for the initial mode of transportation to be utilized, as follows:</P> <P>(1) <E T="03">Certificate-Holding Aircraft:</E> The Federal Aviation Administration Civil Aviation Security Office that serves the place where the flight will originate or that is responsible for the aircraft operator's overall aviation security program. The nearest Civil Aviation Security Office may be located by calling the FAA Duty Officer, 202-267-3333 (any hour).</P> <P>(2) <E T="03">Noncertificate-Holding Aircraft (Those Which Operate Under 14 CFR Part 91):</E> The Federal Aviation Administration Civil Aviation Security Office that serves the place where the flight will originate. The nearest Civil Aviation Security Office may be located by calling the FAA Duty Officer, 202-267-3333 (any hour).</P> <P>(3) <E T="03">Motor Vehicle Transportation:</E> Chief, Hazardous Materials Division, Federal Motor Carrier Safety Administration, U.S. Department of Transportation, Washington, DC 20590-0001, 202-385-2400 (day); 1-800-424-8802 (night).</P> <P>(4) <E T="03">Rail Transportation:</E> Staff Director, Hazardous Materials Division, Office of Safety Assurance and Compliance, Federal Railroad Administration, U.S. Department of Transportation, Washington, DC 20590-0001, 202-493-6248 or 202-493-6244 (day); 1-800-424-8802 (night).<PRTPAGE P="27"/> </P> <P>(5) <E T="03">Water Transportation:</E> Chief, Hazardous Materials Standards Division, Office of Operating and Environmental Standards, U.S. Coast Guard, U.S. Department of Homeland Security, Washington, DC 20593-0001; (202) 267-1217 (day); 1-800-424-8802 (night).</P> <P>(e) On receipt of all information necessary to process the application, the receiving Department official transmits to the Associate Administrator, by the most rapid available means of communication, an evaluation as to whether an emergency exists under § 107.117(a) and, if appropriate, recommendations as to the conditions to be included in the special permit. If the Associate Administrator determines that an emergency exists under § 107.117(a) and that, with reference to the criteria of § 107.113(f), granting of the application is in the public interest, the Associate Administrator grants the application subject to such terms as necessary and immediately notifies the applicant. If the Associate Administrator determines that an emergency does not exist or that granting of the application is not in the public interest, the applicant immediately is so notified.</P> <P>(f) A determination that an emergency does not exist is not subject to reconsideration under § 107.123 of this part.</P> <P>(g) Within 90 days following issuance of an emergency special permit, the Associate Administrator will publish, in the <E T="04">Federal Register,</E> a notice of issuance with a statement of the basis for the finding of emergency and the scope and duration of the special permit.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 62 FR 51556, Oct. 1, 1997; 64 FR 51914, Sept. 27, 1999; 65 FR 58618, Sept. 29, 2000; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005; 75 FR 53596, Sept. 1, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.121</SECTNO> <SUBJECT>Modification, suspension or termination of special permit or grant of party status.</SUBJECT> <P>(a) The Associate Administrator may modify an exemption, a special permit, or grant of party status on finding that:</P> <P>(1) Modification is necessary so that the exemption or special permit reflects current statutes and regulations; or</P> <P>(2) Modification is required by changed circumstances to meet the standards of § 107.113(f).</P> <P>(b) The Associate Administrator may modify, suspend or terminate an exemption or special permit or grant of party status, as appropriate, on finding that:</P> <P>(1) Because of a change in circumstances, the exemption, special permit, or party status no longer is needed or no longer would be granted if applied for;</P> <P>(2) The application contained inaccurate or incomplete information, and the exemption, special permit, or party status would not have been granted had the application been accurate and complete;</P> <P>(3) The application contained deliberately inaccurate or incomplete information; or</P> <P>(4) The holder or party knowingly has violated the terms of the exemption, special permit or an applicable requirement of this chapter, in a manner demonstrating the holder or party is not fit to conduct the activity authorized by the exemption or special permit.</P> <P>(c) Except as provided in paragraph (d) of this section, before an exemption, special permit, or grant of party status is modified, suspended or terminated, the Associate Administrator notifies the holder or party in writing of the proposed action and the reasons for it, and provides an opportunity to show cause why the proposed action should not be taken.</P> <P>(1) The holder or party may file a written response that shows cause why the proposed action should not be taken within 30 days of receipt of notice of the proposed action.</P> <P>(2) After considering the holder's or party's written response, or after 30 days have passed without response since receipt of the notice, the Associate Administrator notifies the holder or party in writing of the final decision with a brief statement of reasons.</P> <P>(d) The Associate Administrator, if necessary to avoid a risk of significant harm to persons or property, may in <PRTPAGE P="28"/>the notification declare the proposed action immediately effective.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 70 FR 73161, Dec. 9, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.123</SECTNO> <SUBJECT>Reconsideration.</SUBJECT> <P>(a) An applicant for special permit, a special permit holder, or an applicant for party status to an exemption or special permit may request that the Associate Administrator reconsider a decision under § 107.113(g), § 107.117(e) or § 107.121(c) of this part. The request must—</P> <P>(1) Be in writing and filed within 20 days of receipt of the decision;</P> <P>(2) State in detail any alleged errors of fact and law;</P> <P>(3) Enclose any additional information needed to support the request to reconsider; and</P> <P>(4) State in detail the modification of the final decision sought.</P> <P>(b) The Associate Administrator grants or denies, in whole or in part, the relief requested and informs the requesting person in writing of the decision. If necessary to avoid a risk of significant harm to persons or property, the Associate Administrator may, in the notification, declare the action immediately effective.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 70 FR 73161, Dec. 9, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.125</SECTNO> <SUBJECT>Appeal.</SUBJECT> <P>(a) A person who requested reconsideration under § 107.123 and is denied the relief requested may appeal to the Administrator. The appeal must—</P> <P>(1) Be in writing and filed within 30 days of receipt of the Associate Administrator's decision on reconsideration;</P> <P>(2) State in detail any alleged errors of fact and law;</P> <P>(3) Enclose any additional information needed to support the appeal; and</P> <P>(4) State in detail the modification of the final decision sought.</P> <P>(b) The Administrator, if necessary to avoid a risk of significant harm to persons or property, may declare the Associate Administrator's action effective pending a decision on appeal.</P> <P>(c) The Administrator grants or denies, in whole or in part, the relief requested and informs the appellant in writing of the decision. The Administrator's decision is the final administrative action.</P> </SECTION> <SECTION> <SECTNO>§ 107.127</SECTNO> <SUBJECT>Availability of documents for public inspection.</SUBJECT> <P>(a) Documents related to an application under this subpart, including the application itself, are available for public inspection, except as specified in paragraph (b) of this section, at the Office of the Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration, Office of Hazardous Materials Special Permits and Approvals, U.S. Department of Transportation, East Building, PHH-30, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001. Office hours are 8:30 a.m. to 5 p.m., Monday through Friday, except Federal holidays when the office is closed. Copies of available documents may be obtained as provided in part 7 of this title. Documents numbered 11832 and above may also be viewed at the website address <E T="03">http://www.regulations.gov</E>.</P> <P>(b) Documents available for inspection do not include materials determined to be withheld from public disclosure under § 105.30 and in accordance with the applicable provisions of section 552(b) of title 5, United States Code, and part 7 of this title.</P> <CITA>[Amdt. 107-38, 61 FR 21095, May 9, 1996, as amended at 65 FR 58618, Sept. 29, 2000; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 70 FR 73162, Dec. 9, 2005; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Preemption</HD> <SECTION> <SECTNO>§ 107.201</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>(a) This subpart prescribes procedures by which:</P> <P>(1) Any person, including a State, political subdivision, or Indian tribe, directly affected by a requirement of a State, political subdivision, or Indian tribe, may apply for a determination as to whether that requirement is preempted under 49 U.S.C. 5125.</P> <P>(2) A State, political subdivision, or Indian tribe may apply for a waiver of preemption with respect to any requirement that the State, political subdivision, or Indian tribe acknowledges to be preempted by 49 U.S.C. 5125, or that has been determined by a court <PRTPAGE P="29"/>of competent jurisdiction to be so preempted.</P> <P>(b) For purposes of this subpart “political subdivision” includes a municipality; a public agency or other instrumentality of one or more States, municipalities, or other political subdivisions of a State; or a public corporation, board, or commission established under the laws of one or more States.</P> <P>(c) [Reserved]</P> <P>(d) An application for a preemption determination that includes an application for a waiver of preemption will be treated and processed solely as an application for a preemption determination.</P> <CITA>[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56 FR 8622, Feb. 28, 1991; Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49130, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept. 21, 1995; Amdt. 107-38, 61 FR 21098, May 9, 1996; 68 FR 52846, Sept. 8, 2003; 71 FR 30067, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.202</SECTNO> <SUBJECT>Standards for determining preemption.</SUBJECT> <P>(a) Except as provided in § 107.221 and unless otherwise authorized by Federal law, any requirement of a State or political subdivision thereof or an Indian tribe that concerns one of the following subjects and that is not substantively the same as any provision of the Federal hazardous materials transportation law, a regulation issued under the Federal hazardous material transportation law, or a hazardous material transportation security regulation or directive issued by the Secretary of Homeland Security that concerns that subject, is preempted:</P> <P>(1) The designation, description, and classification of hazardous material.</P> <P>(2) The packing, repacking, handling, labeling, marking, and placarding of hazardous material.</P> <P>(3) The preparation, execution, and use of shipping documents pertaining to hazardous material and requirements related to the number, content, and placement of those documents.</P> <P>(4) The written notification, recording, and reporting of the unintentional release in transportation of hazardous material.</P> <P>(5) The design, manufacturing, fabrication, marking, maintenance, reconditioning, repairing, or testing of a packaging or a container which is represented, marked, certified, or sold as qualified for use in the transportation of hazardous material.</P> <P>(b) Except as provided in § 107.221 and unless otherwise authorized by Federal law, any requirement of a State or political subdivision or Indian tribe is preempted if—</P> <P>(1) It is not possible to comply with a requirement of the State, political subdivision, or Indian tribe and a requirement under the Federal hazardous material transportation law, a regulation issued under the Federal hazardous material transportation law, or a hazardous material transportation security regulation or directive issued by the Secretary of Homeland Security;</P> <P>(2) The requirement of the State, political subdivision, or Indian tribe, as applied or enforced, is an obstacle to accomplishing and carrying out the Federal hazardous material transportation law, a regulation issued under the Federal hazardous material transportation law, or a hazardous material transportation security regulation or directive issued by the Secretary of Homeland Security.</P> <P>(3) It is preempted under 49 U.S.C. 5125 (c).</P> <P>(c) A State, political subdivision, or Indian tribe may impose a fee related to transporting hazardous material only if the fee is fair and used for a purpose related to transporting hazardous material, including enforcement and planning, developing and maintaining a capability for emergency response.</P> <P>(d) For purposes of this section, “substantively the same” means that the non-Federal requirement conforms in every significant respect to the Federal requirement. Editorial and other similar <E T="03">de minimis</E> changes are permitted.</P> <CITA>[Amdt. 107-24, 56 FR 8622, Feb. 28, 1991, as amended by Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; Amdt. 107-32, 59 FR 49130, Sept. 26, 1994; Amdt. 107-38, 61 FR 21098, May 9, 1996; Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 68 FR 52847, Sept. 8, 2003]</CITA> </SECTION> <SUBJGRP> <PRTPAGE P="30"/> <HD SOURCE="HED">Preemption Determinations</HD> <SECTION> <SECTNO>§ 107.203</SECTNO> <SUBJECT>Application.</SUBJECT> <P>(a) With the exception of highway routing matters covered under 49 U.S.C. 5125(c), any person, including a State or political subdivision thereof or an Indian tribe, directly affected by any requirement of a State or political subdivision thereof or an Indian tribe, may apply to the Chief Counsel for a determination as to whether that requirement is preempted by § 107.202(a), (b), or (c).</P> <P>(b) Each application filed under this section for a determination must:</P> <P>(1) Be submitted to the Chief Counsel:</P> <P>(i) By mail addressed to the Chief Counsel, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, PHC-1, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;</P> <P>(ii) By facsimile to 202-366-7041; or</P> <P>(iii) Electronically to the Chief Counsel at <E T="03">phmsachiefcounsel@dot.gov.</E> </P> <P>(2) Set forth the text of the State or political subdivision or Indian tribe requirement for which the determination is sought;</P> <P>(3) Specify each requirement of the Federal hazardous materials transportation law, regulations issued under the Federal hazardous material transportation law, or hazardous material transportation security regulations or directives issued by the Secretary of Homeland Security with which the applicant seeks the State or political subdivision or Indian tribe requirement to be compared;</P> <P>(4) Explain why the applicant believes the State or political subdivision or Indian tribe requirement should or should not be preempted under the standards of § 107.202; and</P> <P>(5) State how the applicant is affected by the State or political subdivision or Indian tribe requirement.</P> <P>(c) The filing of an application for a determination under this section does not constitute grounds for noncompliance with any requirement of the Federal hazardous materials transportation law, regulations issued under the Federal hazardous material transportation law, or hazardous material transportation security regulations or directives issued by the Secretary of Homeland Security.</P> <P>(d) Once the Chief Counsel has published notice in the <E T="04">Federal Register</E> of an application received under paragraph (a) of this section, no applicant for such determination may seek relief with respect to the same or substantially the same issue in any court until final action has been taken on the application or until 180 days after filing of the application, whichever occurs first. Nothing in § 107.203(a) prohibits a State or political subdivision thereof or Indian tribe, or any other person directly affected by any requirement of a State or political subdivision thereof or Indian tribe, from seeking a determination of preemption in any court of competent jurisdiction in lieu of applying to the Chief Counsel under paragraph (a) of this section.</P> <CITA>[Amdt. 107-24, 56 FR 8622, Feb. 28, 1991, as amended by Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-38, 61 FR 21098, May 9, 1996; 68 FR 52847, Sept. 8, 2003; 71 FR 30067, May 25, 2006; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.205</SECTNO> <SUBJECT>Notice.</SUBJECT> <P>(a) If the applicant is other than a State, political subdivision, or Indian tribe, the applicant shall mail a copy of the application to the State, political subdivision, or Indian tribe concerned accompanied by a statement that the State, political subdivision, or Indian tribe may submit comments regarding the application to the Chief Counsel. The application filed with the Chief Counsel must include a certification that the applicant has complied with this paragraph and must include the names and addresses of each State, political subdivision, or Indian tribe official to whom a copy of the application was sent.</P> <P>(b) The Chief Counsel will publish notice of, including an opportunity to comment on, an application in the <E T="04">Federal Register</E> and may notify in writing any person readily identifiable as affected by the outcome of the determination.</P> <P>(c) Each person submitting written comments to the Chief Counsel with respect to an application filed under this section must send a copy of the comments to the applicant and certify to <PRTPAGE P="31"/>the Chief Counsel that he or she has complied with this requirement. The Chief Counsel may notify other persons participating in the proceeding of the comments and provide an opportunity for those other persons to respond. Late-filed comments are considered so far as practicable.</P> <CITA>[Amdt. 107-38, 61 FR 21098, May 9, 1996, as amended at 71 FR 30067, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.207</SECTNO> <SUBJECT>Processing.</SUBJECT> <P>(a) The Chief Counsel may initiate an investigation of any statement in an application and utilize in his or her evaluation any relevant facts obtained by that investigation. The Chief Counsel may solicit and accept submissions from third persons relevant to an application and will provide the applicant an opportunity to respond to all third person submissions. In evaluating an application, the Chief Counsel may consider any other source of information. The Chief Counsel on his or her own initiative may convene a hearing or conference, if he or she considers that a hearing or conference will advance his or her evaluation of the application.</P> <P>(b) The Chief Counsel may dismiss the application without prejudice if:</P> <P>(1) He or she determines that there is insufficient information upon which to base a determination; or</P> <P>(2) He or she requests additional information from the applicant and it is not submitted.</P> <CITA>[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56 FR 8621, 8622, Feb. 28, 1991; Amdt. 107-38, 61 FR 21098, May 9, 1996; 71 FR 30067, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.209</SECTNO> <SUBJECT>Determination.</SUBJECT> <P>(a) Upon consideration of the application and other relevant information received, the Chief Counsel issues a determination.</P> <P>(b) The determination includes a written statement setting forth the relevant facts and the legal basis for the determination, and provides that any person aggrieved thereby may file a petition for reconsideration with the Chief Counsel.</P> <P>(c) The Chief Counsel provides a copy of the determination to the applicant and to any other person who substantially participated in the proceeding or requested in comments to the docket to be notified of the determination. A copy of each determination is placed on file in the public docket. The Chief Counsel will publish the determination or notice of the determination in the <E T="04">Federal Register,</E> at which time the determination becomes a final agency action.</P> <P>(d) A determination issued under this section constitutes an administrative determination as to whether a particular requirement of a State or political subdivision or Indian tribe is preempted under the Federal hazardous materials transportation law. The fact that a determination has not been issued under this section with respect to a particular requirement of a State or political subdivision or Indian tribe carries no implication as to whether the requirement is preempted under the Federal hazardous materials transportation law.</P> <CITA>[Amdt. 107-24, 56 FR 8623, Feb. 28, 1991, as amended by Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-38, 61 FR 21098, May 9, 1996; 68 FR 52847, Sept. 8, 2003; 71 FR 30067, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.211</SECTNO> <SUBJECT>Petition for reconsideration.</SUBJECT> <P>(a) Any person aggrieved by a determination issued under § 107.209 may file a petition for reconsideration. The petition must be filed with the Chief Counsel, in the same manner specified for filing an application in § 107.203(b), within 20 days of publication of the determination in the <E T="04">Federal Register.</E> </P> <P>(b) The petition must contain a concise statement of the basis for seeking review, including any specific factual or legal error alleged. If the petition requests consideration of information that was not previously made available to the Chief Counsel, the petition must include the reasons why such information was not previously made available.</P> <P>(c) The petitioner shall mail a copy of the petition to each person who participated, either as an applicant or commenter, in the preemption determination proceeding, accompanied by a statement that the person may submit comments concerning the petition to the Chief Counsel within 20 days. The petition filed with the Chief Counsel <PRTPAGE P="32"/>must contain a certification that the petitioner has complied with this paragraph and include the names and addresses of all persons to whom a copy of the petition was sent. Late-filed comments are considered so far as practicable.</P> <P>(d) The Chief Counsel will publish the decision on the petition for reconsideration or notice of the decision in the <E T="04">Federal Register,</E> at which time the decision on the petition for reconsideration becomes a final agency action.</P> <CITA>[Amdt. 107-25, 57 FR 20428, May 13, 1992, as amended by Amdt. 107-38, 61 FR 21099, May 9, 1996; 71 FR 30067, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.213</SECTNO> <SUBJECT>Judicial review.</SUBJECT> <P>A party to a proceeding under § 107.203(a) may seek review of a determination of the Chief Counsel by filing a petition, within 60 days after the determination becomes final, in the United States Court of Appeals for the District of Columbia or in the Court of Appeals for the United States for the circuit in which the person resides or has its principal place of business.</P> <CITA>[71 FR 30068, May 25, 2006]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Waiver of Preemption Determinations</HD> <SECTION> <SECTNO>§ 107.215</SECTNO> <SUBJECT>Application.</SUBJECT> <P>(a) With the exception of requirements preempted under 49 U.S.C. 5125(c), a State or political subdivision thereof, or Indian tribe may apply to the Chief Counsel for a waiver of preemption with respect to any requirement that the State or political subdivision thereof or Indian tribe acknowledges to be preempted under the Federal hazardous materials transportation law, or that has been determined by a court of competent jurisdiction to be so preempted. The Chief Counsel may waive preemption with respect to such requirement upon a determination that such requirement—</P> <P>(1) Affords an equal or greater level of protection to the public than is afforded by the requirements of the Federal hazardous material transportation law or the regulations issued thereunder, and</P> <P>(2) Does not unreasonably burden commerce.</P> <P>(b) Each application filed under this section for a waiver of preemption determination must:</P> <P>(1) Be submitted to the Chief Counsel:</P> <P>(i) By mail addressed to the Chief Counsel, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, PHC-1, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001;</P> <P>(ii) By facsimile to 202-366-7041; or</P> <P>(iii) Electronically to the Chief Counsel at <E T="03">phmsachiefcounsel@dot.gov.</E> </P> <P>(2) Set forth the text of the State or political subdivision requirement for which the determination is being sought;</P> <P>(3) Include a copy of any court order and any ruling issued under § 107.209 having a bearing on the application;</P> <P>(4) Contain an express acknowledgment by the applicant that the State, political subdivision, or Indian tribe requirement is preempted under Federal hazardous materials transportation law, unless it has been so determined by a court of competent jurisdiction or in a determination issued under § 107.209;</P> <P>(5) Specify each requirement of the Federal hazardous materials transportation law that preempts the State, political subdivision, or Indian tribe requirement;</P> <P>(6) State why the applicant believes the State, political subdivision or Indian tribe requirements affords an equal or greater level of protection to the public than is afforded by the requirements of the Federal hazardous material transportation law or the regulations issued thereunder;</P> <P>(7) State why the applicant believes the State, political subdivision or Indian tribe requirement does not unreasonably burden commerce; and</P> <P>(8) Specify what steps the State, political subdivision or Indian tribe is taking to administer and enforce effectively its inconsistent requirement.</P> <CITA>[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-24, 56 FR 8621, 8623, Feb. 28, 1991; 56 FR 15510, Apr. 17, 1991; Amdt. 107-23, 56 FR 66156, Dec. 20, 1991; Amdt. 107-25, 57 FR 20428, May 13, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-38, 61 FR 21099, May 9, 1996; 68 FR 52847, Sept. 8, 2003; 71 FR 30068, May 25, 2006; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <PRTPAGE P="33"/> <SECTNO>§ 107.217</SECTNO> <SUBJECT>Notice.</SUBJECT> <P>(a) The applicant shall mail a copy of the application and any subsequent amendments or other documents relating to the application to each person who is reasonably ascertainable by the applicant as a person who will be affected by the determination sought. The copy of the application must be accompanied by a statement that the person may submit comments regarding the application within 45 days. The application must include a certification that the application has complied with this paragraph and must include the names and addresses of each person to whom the application was sent.</P> <P>(b) Notwithstanding the provisions of paragraph (a) of this section, if the State or political subdivision determines that compliance with paragraph (a) of this section would be impracticable, the applicant shall:</P> <P>(1) Comply with the requirements of paragraph (a) of this section with regard to those persons whom it is reasonable and practicable to notify; and</P> <P>(2) Include with the application a description of the persons or class or classes of persons to whom notice was not sent.</P> <P>(c) The Chief Counsel may require the applicant to provide notice in addition to that required by paragraphs (a) and (b) of this section, or may determine that the notice required by paragraph (a) of the section is not impracticable, or that notice should be published in the <E T="04">Federal Register.</E> Late-filed comments are considered so far as practicable.</P> <P>(d) The Chief Counsel may notify any other persons who may be affected by the outcome of a determination on the application.</P> <P>(e) Any person submitting written comments with respect to an application filed under this section shall send a copy of the comments to the applicant. The person shall certify that he has complied with the requirements of this paragraph. The Chief Counsel may notify other persons participating in the proceeding of the comments and provide an opportunity for those other persons to respond.</P> <CITA>[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt. 107-25, 57 FR 20429, May 13, 1992; Amdt. 107-38, 61 FR 21099, May 9, 1996; 71 FR 30068, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.219</SECTNO> <SUBJECT>Processing.</SUBJECT> <P>(a) The Chief Counsel may initiate an investigation of any statement in an application and utilize in his or her evaluation any relevant facts obtained by that investigation. The Chief Counsel may solicit and accept submissions from third persons relevant to an application and will provide the applicant an opportunity to respond to all third person submissions. In evaluating an application, the Chief Counsel on his or her own initiative may convene a hearing or conference, if he or she considers that a hearing or conference will advance his or her evaluation of the application.</P> <P>(b) The Chief Counsel may dismiss the application without prejudice if:</P> <P>(1) He or she determines that there is insufficient information upon which to base a determination;</P> <P>(2) Upon his or her request, additional information is not submitted by the applicant; or</P> <P>(3) The applicant fails to provide the notice required by § 107.217.</P> <P>(c) The Chief Counsel will only consider an application for waiver of preemption determination if—</P> <P>(1) The applicant State or political subdivision thereof or Indian tribe expressly acknowledges in its application that the State or political subdivision or Indian tribe requirement for which the determination is sought is inconsistent with the requirements of the Federal hazardous materials transportation law, regulations issued under the Federal hazardous material transportation law, or hazardous material transportation security regulations or directives issued by the Secretary of Homeland Security.</P> <P>(2) The State or political subdivision thereof or Indian tribe requirement has been determined by a court of competent jurisdiction or in a ruling issued under § 107.209 to be inconsistent with the requirements of the Federal hazardous materials transportation law, <PRTPAGE P="34"/>regulations issued under the Federal hazardous material transportation law, or hazardous material transportation security regulations or directives issued by the Secretary of Homeland Security.</P> <P>(d) When the Chief Counsel has received all substantive information it considers necessary to process an application for a waiver of preemption determination, it serves notice of that fact upon the applicant and all other persons who received notice of the proceeding pursuant to § 107.217.</P> <P>(e) To the extent possible, each application for a waiver of preemption determination will be acted upon in a manner consistent with the disposition of previous applications for waiver of preemption determinations.</P> <CITA>[Amdt. 107-3, 41 FR 38171, Sept. 9, 1976, as amended by Amdt. 107-24, 56 FR 8621, 8623, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-38, 61 FR 21099, May 9, 1996; 65 FR 58618, Sept. 29, 2000; 68 FR 52847, Sept. 8, 2003; 69 FR 54044, Sept. 7, 2004; 71 FR 30068, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.221</SECTNO> <SUBJECT>Determination.</SUBJECT> <P>(a) After considering the application and other relevant information received or obtained during the proceeding, the Chief Counsel issues a determination.</P> <P>(b) The Chief Counsel may issue a waiver of preemption only on finding that the requirement of the State or political subdivision thereof or Indian tribe affords the public a level of safety at least equal to that afforded by the requirements of the Federal hazardous material transportation law or the regulations issued thereunder and does not unreasonably burden commerce. In determining if the requirement of the State or political subdivision thereof or Indian tribe unreasonably burdens commerce, the Chief Counsel considers:</P> <P>(1) The extent to which increased costs and impairment of efficiency result from the requirement of the State or political subdivision thereof or Indian tribe.</P> <P>(2) Whether the requirement of the State or political subdivision thereof or Indian tribe has a rational basis.</P> <P>(3) Whether the requirement of the State or political subdivision thereof or Indian tribe achieves its stated purpose.</P> <P>(4) Whether there is need for uniformity with regard to the subject concerned and if so, whether the requirement of the State or political subdivision thereof or Indian tribe competes or conflicts with those of other States or political subdivisions thereof or Indian tribes.</P> <P>(c) The determination includes a written statement setting forth relevant facts and legal bases and providing that any person aggrieved by the determination may file a petition for reconsideration with the Chief Counsel.</P> <P>(d) The Chief Counsel provides a copy of the determination to the applicant and to any other person who substantially participated in the proceeding or requested in comments to the docket to be notified of the determination. A copy of the determination is placed on file in the public docket. The Chief Counsel will publish the determination or notice of the determination in the <E T="04">Federal Register,</E> at which time the determination becomes a final agency action.</P> <P>(e) A determination under this section constitutes an administrative finding of whether a particular requirement of a State or political subdivision thereof or Indian tribe is preempted under the Federal hazardous materials transportation law, or whether preemption is waived.</P> <CITA>[Amdt. 107-38, 61 FR 21099, May 9, 1996, as amended at 68 FR 52848, Sept. 8, 2003; 71 FR 30068, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.223</SECTNO> <SUBJECT>Petition for reconsideration.</SUBJECT> <P>(a) Any person aggrieved by a determination under § 107.221 may file a petition for reconsideration. The petition must be filed with the Chief Counsel, in the same manner specified for filing an application in § 107.215(b), within 20 days of publication of the determination in the <E T="04">Federal Register.</E> </P> <P>(b) The petition must contain a concise statement of the basis for seeking review, including any specific factual or legal error alleged. If the petition requests consideration of information that was not previously made available to the Chief Counsel, the petition must <PRTPAGE P="35"/>include the reasons why such information was not previously made available.</P> <P>(c) The petitioner shall mail a copy of the petition to each person who participated, either as an applicant or commenter, in the waiver of preemption proceeding, accompanied by a statement that the person may submit comments concerning the petition to the Chief Counsel within 20 days. The petition filed with the Chief Counsel must contain a certification that the petitioner has complied with this paragraph and include the names and addresses of all persons to whom a copy of the petition was sent. Late-filed comments are considered so far as practicable.</P> <P>(d) The Chief Counsel will publish the decision on the petition for reconsideration or notice of the decision in the <E T="04">Federal Register,</E> at which time the decision on the petition for reconsideration becomes a final agency action.</P> <CITA>[Amdt. 107-25, 57 FR 20429, May 13, 1992, as amended by Amdt. 107-38, 61 FR 21099, May 9, 1996; 71 FR 30068, May 25, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.227</SECTNO> <SUBJECT>Judicial review.</SUBJECT> <P>A party to a proceeding under § 107.215(a) may seek review of a determination of the Chief Counsel by filing a petition, within 60 days after the determination becomes final, in the United States Court of Appeals for the District of Columbia or in the Court of Appeals for the United States for the circuit in which the person resides or has its principal place of business.</P> <CITA>[71 FR 30068, May 25, 2006]</CITA> </SECTION> </SUBJGRP> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Enforcement</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 107.301</SECTNO> <SUBJECT>Delegated authority for enforcement.</SUBJECT> <P>Under redelegation from the Administrator, Pipeline and Hazardous Materials Safety Administration, the Associate Administrator for Hazardous Materials Safety and the Office of the Chief Counsel exercise their authority for enforcement of the Federal hazardous material transportation law, this subchapter, and subchapter C of this subchapter, in accordance with § 1.53 of this title.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.303</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>This subchapter describes the various enforcement authorities exercised by the Associate Administrator for Hazardous Materials Safety and the Office of Chief Counsel and the associated sanctions and prescribes the procedures governing the exercise of those authorities and the imposition of those sanctions.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51 FR 34986, Oct. 1, 1986; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.305</SECTNO> <SUBJECT>Investigations.</SUBJECT> <P>(a) <E T="03">General.</E> In accordance with its delegated authority under part 1 of this title, the Associate Administrator may initiate investigations relating to compliance by any person with any provisions of this subchapter or subchapter C of this chapter, or any special permit, approval, or order issued thereunder, or any court decree relating thereto. The Associate Administrator encourages voluntary production of documents in accordance with and subject to § 105.45, and hearings may be conducted, and depositions taken pursuant to 49 U.S.C. 5121(a). The Associate Administrator may conduct investigative conferences and hearings in the course of any investigation.</P> <P>(b) <E T="03">Investigations and Inspections.</E> Investigations under 49 U.S.C. 5121(a) are conducted by personnel duly authorized for that purpose by the Associate Administrator. Inspections under 49 U.S.C. 5121(c) are conducted by Hazardous Materials Enforcement Specialists or Hazardous Materials Compliance Investigators, also known as “hazmat investigators” or “investigators,” whom the Associate Administrator has designated for that purpose.</P> <P>(1) An investigator will, on request, present his or her credentials for examination, but the credentials may not be reproduced.</P> <P>(2) An investigator may administer oaths and receive affirmations in any matter under investigation by the Associate Administrator.<PRTPAGE P="36"/> </P> <P>(3) An investigator may gather information by reasonable means including, but not limited to, interviews, statements, photocopying, photography, and video- and audio-recording.</P> <P>(4) With concurrence of the Director, Office of Hazardous Materials Enforcement, Pipeline and Hazardous Materials Safety Administration, an investigator may issue a subpoena for the production of documentary or other tangible evidence if, on the basis of information available to the investigator, the documents and evidence materially will advance a determination of compliance with this subchapter or subchapter C. Service of a subpoena shall be in accordance with § 105.50. A person to whom a subpoena is directed may seek review of the subpoena by applying to the Office of Chief Counsel in accordance with § 105.55(a). A subpoena issued under this paragraph may be enforced in accordance with § 105.55(b).</P> <P>(c) <E T="03">Notification.</E> Any person who is the subject of an Associate Administrator investigation and who is requested to furnish information or documentary evidence is notified as to the general purpose for which the information or evidence is sought.</P> <P>(d) <E T="03">Termination.</E> When the facts disclosed by an investigation indicate that further action is unnecessary or unwarranted at that time, the person being investigated is notified and the investigative file is closed without prejudice to further investigation by the Associate Administrator.</P> <P>(e) <E T="03">Confidentiality.</E> Information received in an investigation under this section, including the identity of the person investigated and any other person who provides information during the investigation, shall remain confidential under the investigatory file exception, or other appropriate exception, to the public disclosure requirements of 5 U.S.C. 552.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-38, 61 FR 21099, May 9, 1996; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 73 FR 4711, Jan. 28, 2008]</CITA> </SECTION> <SUBJGRP> <HD SOURCE="HED">Compliance Orders and Civil Penalties</HD> <SECTION> <SECTNO>§ 107.307</SECTNO> <SUBJECT>General.</SUBJECT> <P>(a) When the Associate Administrator and the Office of Chief Counsel have reason to believe that a person is knowingly engaging or has knowingly engaged in conduct which is a violation of the Federal hazardous material transportation law or any provision of this subchapter or subchapter C of this chapter, or any exemption, special permit, or order issued thereunder, for which the Associate Administrator or the Office of Chief Counsel exercise enforcement authority, they may—</P> <P>(1) Issue a warning letter, as provided in § 107.309;</P> <P>(2) Initiate proceedings to assess a civil penalty, as provided in either §§ 107.310 or 107.311;</P> <P>(3) Issue an order directing compliance, regardless of whether a warning letter has been issued or a civil penalty assessed; and</P> <P>(4) Seek any other remedy available under the Federal hazardous material transportation law.</P> <P>(b) In the case of a proceeding initiated for failure to comply with an exemption or special permit, the allegation of a violation of a term or condition thereof is considered by the Associate Administrator and the Office of Chief Counsel to constitute an allegation that the special permit holder or party to the special permit is failing, or has failed to comply with the underlying regulations from which relief was granted by the special permit.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-36, 61 FR 7183, Feb. 26, 1996; 66 FR 45377, Aug. 28, 2001; 70 FR 73162, Dec. 9, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.309</SECTNO> <SUBJECT>Warning letters.</SUBJECT> <P>(a) The Associate Administrator may issue a warning letter to any person whom the Associate Administrator believes to have committed a probable violation of the Federal hazardous material transportation law or any provision of this subchapter, subchapter C of this chapter, or any special permit issued thereunder.</P> <P>(b) A warning letter issued under this section includes:<PRTPAGE P="37"/> </P> <P>(1) A statement of the facts upon which the Associate Administrator bases its determination that the person has committed a probable violation;</P> <P>(2) A statement that the recurrence of the probable violations cited may subject the person to enforcement action; and</P> <P>(3) An opportunity to respond to the warning letter by submitting pertinent information or explanations concerning the probable violations cited therein.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51 FR 34986, Oct. 1, 1986; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-36, 61 FR 7183, Feb. 26, 1996; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.310</SECTNO> <SUBJECT>Ticketing.</SUBJECT> <P>(a) For an alleged violation that does not have a direct or substantial impact on safety, the Associate Administrator may issue a ticket.</P> <P>(b) The Associate Administrator issues a ticket by mailing it by certified or registered mail to the person alleged to have committed the violation. The ticket includes:</P> <P>(1) A statement of the facts on which the Associate Administrator bases the conclusion that the person has committed the alleged violation;</P> <P>(2) The maximum penalty provided for by statute, the proposed full penalty determined according to PHMSA's civil penalty guidelines and the statutory criteria for penalty assessment, and the ticket penalty amount; and</P> <P>(3) A statement that within 45 days of receipt of the ticket, the person must pay the penalty in accordance with paragraph (d) of this section, make an informal response under § 107.317, or request a formal administrative hearing under § 107.319.</P> <P>(c) If the person makes an informal response or requests a formal administrative hearing, the Associate Administrator forwards the inspection report, ticket and response to the Office of the Chief Counsel for processing under §§ 107.307-107.339, except that the Office of the Chief Counsel will not issue a Notice of Probable Violation under § 107.311. The Office of the Chief Counsel may impose a civil penalty that does not exceed the proposed full penalty set forth in the ticket.</P> <P>(d) Payment of the ticket penalty amount must be made in accordance with the instructions on the ticket.</P> <P>(e) If within 45 days of receiving the ticket the person does not pay the ticket amount, make an informal response, or request a formal administrative hearing, the person has waived the right to make an informal response or request a hearing, has admitted the violation and owes the ticket penalty amount to PHMSA.</P> <CITA>[Amdt. 107-36, 61 FR 7183, Feb. 26, 1996, as amended at 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.311</SECTNO> <SUBJECT>Notice of probable violation.</SUBJECT> <P>(a) The Office of Chief Counsel may serve a notice of probable violation on a person alleging the violation of one or more provisions of the Federal hazardous material transportation law or any provision of this subchapter or subchapter C of this chapter, or any special permit, or order issued thereunder.</P> <P>(b) A notice of probable violation issued under this section includes the following information:</P> <P>(1) A citation of the provisions of the Federal hazardous material transportation law, an order issued thereunder, this subchapter, subchapter C of this chapter, or the terms of any special permit issued thereunder which the Office of Chief Counsel believes the respondent is violating or has violated.</P> <P>(2) A statement of the factual allegations upon which the demand for remedial action, a civil penalty, or both, is based.</P> <P>(3) A statement of the respondent's right to present written or oral explanations, information, and arguments in answer to the allegations and in mitigation of the sanction sought in the notice of probable violation.</P> <P>(4) A statement of the respondent's right to request a hearing and the procedures for requesting a hearing.</P> <P>(5) In addition, in the case of a notice of probable violation proposing a compliance order, a statement of the proposed actions to be taken by the respondent to achieve compliance.</P> <P>(6) In addition, in the case of a notice of probable violation proposing a civil penalty:<PRTPAGE P="38"/> </P> <P>(i) A statement of the maximum civil penalty for which the respondent may be liable;</P> <P>(ii) The amount of the preliminary civil penalty being sought by the Office of Chief Counsel, constitutes the maximum amount the Chief Counsel may seek throughout the proceeding; and</P> <P>(iii) A description of the manner in which the respondent makes payment of any money due the United States as a result of the proceeding.</P> <P>(c) The Office of Chief Counsel may amend a notice of probable violation at any time before issuance of a compliance order or an order assessing a civil penalty. If the Office of Chief Counsel alleges any new material facts or seeks new or additional remedial action or an increase in the amount of the proposed civil penalty, it issues a new notice of probable violation under this section.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 50 FR 45730, Nov. 1, 1985; Amdt. 107-24, 56 FR 8624, Feb. 28, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept. 21, 1995; Amdt. 107-36, 61 FR 7184, Feb. 26, 1996]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.313</SECTNO> <SUBJECT>Reply.</SUBJECT> <P>(a) Within 30 days of receipt of a notice of probable violation, the respondent must either:</P> <P>(1) Admit the violation under § 107.315;</P> <P>(2) Make an informal response under § 107.317; or</P> <P>(3) Request a hearing under § 107.319.</P> <P>(b) Failure of the respondent to file a reply as provided in this section constitutes a waiver of the respondent's right to appear and contest the allegations and authorizes the Chief Counsel, without further notice to the respondent, to find the facts to be as alleged in the notice of probable violation and issue an order directing compliance or assess a civil penalty, or, if proposed in the notice, both. Failure to request a hearing under paragraph (a)(3) of this section constitutes a waiver of the respondent's right to a hearing.</P> <P>(c) Upon the request of the respondent, the Office of Chief Counsel may, for good cause shown and filed within the 30 days prescribed in the notice of probable violation, extend the 30-day response period.</P> </SECTION> <SECTION> <SECTNO>§ 107.315</SECTNO> <SUBJECT>Admission of violations.</SUBJECT> <P>(a) In responding to a notice of probable violation issued under § 107.311, the respondent may admit the alleged violations and agree to accept the terms of a proposed compliance order or to pay the amount of the preliminarily assessed civil penalty, or, if proposed in the notice, both.</P> <P>(b) If the respondent agrees to the terms of a proposed compliance order, the Chief Counsel issues a final order prescribing the remedial action to be taken by the respondent.</P> <P>(c) Payment of a civil penalty, when the amount of the penalty exceeds $10,000, must be made by wire transfer, through the Federal Reserve Communications System (Fedwire), to the account of the U.S. Treasury. Detailed instructions on making payments by wire transfer may be obtained from the Financial Operations Division (AMZ-120), Federal Aviation Administration, Mike Monroney Aeronautical Center, P.O. Box 25082, Oklahoma City, OK 73125.</P> <P>(d) Payment of a civil penalty, when the amount of the penalty is $10,000 or less, must be made either by wire transfer, as set forth in paragraph (c) of this section, or certified check or money order payable to “U.S. Department of Transportation” and submitted to the Financial Operations Division (AMZ-120), Federal Aviation Administration, Mike Monroney Aeronautical Center, P.O. Box 25082, Oklahoma City, OK 73125.</P> <CITA>[Amdt. 107-11, 48 FR 265l, Jan. 20, 1983, as amended by Amdt. 107-23, 57 FR 45453, Oct. 1, 1992; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; Amdt. 107-38, 61 FR 21100, May 9, 1996; 68 FR 52848, Sept. 8, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.317</SECTNO> <SUBJECT>Informal response.</SUBJECT> <P>(a) In responding to a notice of probable violation under § 107.311, the respondent may submit to the official who issued the notice, written explanations, information, or arguments in response to the allegations, the terms of a proposed compliance order, or the amount of the preliminarily assessed civil penalty.</P> <P>(b) The respondent may include in his informal response a request for a conference. Upon the request of the respondent, the conference may be either <PRTPAGE P="39"/>in person or by telephone. A request for a conference must set forth the issues the respondent will raise at the conference.</P> <P>(c) Upon receipt of a request for a conference under paragraph (b) of this section, the Chief Counsel's Office, in consultation with the Associate Administrator, arranges for a conference as soon as practicable at a time and place of mutual convenience.</P> <P>(d) The respondent's written explanations, information, and arguments as well as the respondent's presentation at a conference are considered by the Chief Counsel in reviewing the notice of probable violation. Based upon a review of the proceeding, the Chief Counsel may dismiss the notice of probable violation in whole or in part. If he does not dismiss it in whole, he issues an order directing compliance or assessing a civil penalty, or, if proposed in the notice, both.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.319</SECTNO> <SUBJECT>Request for a hearing.</SUBJECT> <P>(a) In responding to a notice of probable violation under § 107.311, the respondent may request a formal administrative hearing on the record before an Administrative Law Judge (ALJ) obtained by the Office of the Chief Counsel.</P> <P>(b) A request for a hearing under paragraph (a) of this section must:</P> <P>(1) State the name and address of the respondent and of the person submitting the request if different from the respondent;</P> <P>(2) State which allegations of violations, if any, are admitted; and</P> <P>(3) State generally the issues to be raised by the respondent at the hearing. Issues not raised in the request are not barred from presentation at the hearing; and</P> <P>(4) Be addressed to the official who issued the notice.</P> <P>(c) After a request for a hearing that complies with the requirements of paragraph (b) of this section, the Chief Counsel obtains an ALJ to preside over the hearing and notifies the respondent of this fact. Upon assignment of an ALJ, further matters in the proceeding generally are conducted by and through the ALJ, except that the Chief Counsel and respondent may compromise or settle the case under § 107.327 of this subpart without order of the ALJ or voluntarily dismiss the case under Rule 41(a)(1) of the Federal Rules of Civil Procedure without order of the ALJ; in the event of such a compromise, settlement or dismissal, the Chief Counsel expeditiously will notify the ALJ thereof.</P> <P>(d) At any time after requesting a formal administrative hearing but prior to the issuance of a decision and final order by the ALJ, the respondent may withdraw such request in writing, thereby terminating the jurisdication of the ALJ in the case. Such a withdrawal constitutes an irrevocable waiver of respondent's right to such a hearing on the facts, allegations, and proposed sanction presented in the notice of probable violation to which the request for hearing relates.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 48 FR 17094, Apr. 21, 1983; Amdt. No. 107-19, 54 FR 22899, May 30, 1989]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.321</SECTNO> <SUBJECT>Hearing.</SUBJECT> <P>(a) To the extent practicable, the hearing is held in the general vicinity of the place where the alleged violation occurred or at a place convenient to the respondent. Testimony by witnesses shall be given under oath and the hearing shall be recorded verbatim.</P> <P>(b) Hearings are conducted in accordance with the Federal Rules of Evidence and Federal Rules of Civil Procedure; however, the ALJ may modify them as he determines necessary in the interest of a full development of the facts. In addition, the ALJ may:</P> <P>(1) Administer oaths and affirmations;</P> <P>(2) Issue subpoenas as provided by § 105.45;</P> <P>(3) Adopt procedures for the submission of motions, evidence, and other documents pertinent to the proceeding;</P> <P>(4) Take or cause depositions to be taken;</P> <P>(5) Rule on offers of proof and receive relevant evidence;</P> <P>(6) Examine witnesses at the hearing;</P> <P>(7) Convene, recess, reconvene, adjourn and otherwise regulate the course of the hearing;<PRTPAGE P="40"/> </P> <P>(8) Hold conferences for settlement, simplification of the issues, or any other proper purpose; and</P> <P>(9) Take any other action authorized by, or consistent with, the provisions of this subpart and permitted by law which may expedite the hearing or aid in the disposition of an issue raised therein.</P> <P>(c) The official who issued the notice of probable violation, or his representative, has the burden of proving the facts alleged therein.</P> <P>(d) The respondent may appear and be heard on his own behalf or through counsel of his choice. The respondent or his counsel may offer relevant information including testimony which he believes should be considered in opposition to the allegations or which may bear on the sanction being sought and conduct such cross-examination as may be required for a full disclosure of the facts.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 67 FR 61011, Sept. 27, 2002]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.323</SECTNO> <SUBJECT>ALJ's decision.</SUBJECT> <P>(a) After consideration of all matters of record in the proceeding, the ALJ shall issue an order dismissing the notice of probable violation in whole or in part or granting the sanction sought by the Office of Chief Counsel in the notice. If the ALJ does not dismiss the notice of probable violation in whole, he issues an order directing compliance or assessing a civil penalty, or, if proposed in the notice, both. The order includes a statement of the findings and conclusions, and the reasons therefore, on all material issues of fact, law, and discretion.</P> <P>(b) If, within 20 days of receipt of an order issued under paragraph (a) of this section, the respondent does not submit in writing his acceptance of the terms of an order directing compliance, or, where appropriate, pay a civil penalty, or file an appeal under § 107.325, the case may be referred to the Attorney General with a request that an action be brought in the appropriate United States District Court to enforce the terms of a compliance order or collect the civil penalty.</P> </SECTION> <SECTION> <SECTNO>§ 107.325</SECTNO> <SUBJECT>Appeals.</SUBJECT> <P>(a) <E T="03">Hearing proceedings.</E> A party aggrieved by an ALJ's decision and order issued under § 107.323, may file a written appeal in accordance with paragraph (c) of this section with the Administrator, Office of the Administrator, Pipeline and Hazardous Materials Safety Administration, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(b) <E T="03">Non-Hearing proceedings.</E> A respondent aggrieved by an order issued under § 107.317, may file a written appeal in accordance with paragraph (c) of this section with the Administrator, Office of the Administrator, Pipeline and Hazardous Materials Safety Administration, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <P>(c) An appeal of an order issued under this subpart must:</P> <P>(1) Be filed within 20 days of receipt of the order by the appealing party; and</P> <P>(2) State with particularity the findings in the order that the appealing party challenges, and include all information and arguments pertinent thereto.</P> <P>(d) If the Administrator, PHMSA, affirms the order in whole or in part, the respondent must comply with the terms of the decision within 20 days of the respondent's receipt thereof, or within the time prescribed in the order. If the respondent does not comply with the terms of the decision within 20 days of receipt, or within the time prescribed in the order, the case may be referred to the Attorney General for action to enforce the terms of the decision.</P> <P>(e) The filing of an appeal stays the effectiveness of an order issued under § 107.317 or § 107.323. However, if the Administrator, PHMSA, determines that it is in the public interest, he may keep an order directing compliance in force pending appeal.</P> <CITA>[70 FR 56090, Sept. 23, 2005, as amended at 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <PRTPAGE P="41"/> <SECTNO>§ 107.327</SECTNO> <SUBJECT>Compromise and settlement.</SUBJECT> <P>(a) At any time before an order issued under § 107.317 or § 107.323 is referred to the Attorney General for enforcement, the respondent or the Office of Chief Counsel may propose a compromise as follows:</P> <P>(1) In civil penalty cases, the respondent or Chief Counsel may offer to compromise the amount of the penalty by submitting an offer for a specific amount to the other party. An offer of compromise by the respondent shall be submitted to the Chief Counsel who may, after consultation with the Associate Administrator, accept or reject it.</P> <P>(i) A compromise offer stays the running of any response period then outstanding.</P> <P>(ii) If a compromise is agreed to by the parties, the respondent is notified in writing. Upon receipt of payment by Office of Chief Counsel, the respondent is notified in writing that acceptance of payment is in full satisfaction of the civil penalty proposed or assessed, and Office of Chief Counsel closes the case with prejudice to the respondent.</P> <P>(iii) If a compromise cannot be agreed to, the respondent is notified in writing and is given 10 days or the amount of time remaining in the then outstanding response period, whichever is longer, to respond to whatever action was taken by the Office of Chief Counsel or the Administrator, PHMSA.</P> <P>(2) In compliance order cases, the respondent may propose a consent agreement to the Chief Counsel. If the Chief Counsel accepts the agreement, he issues an order in accordance with its terms. If the Chief Counsel rejects the agreement, he directs that the proceeding continue. An agreement submitted to the Chief Counsel must include:</P> <P>(i) A statement of any allegations of fact which the respondent challenges;</P> <P>(ii) The reasons why the terms of a compliance order or proposed compliance order are or would be too burdensome for the respondent, or why such terms are not supported by the record in the case;</P> <P>(iii) A proposed compliance order suitable for issuance by the Chief Counsel;</P> <P>(iv) An admission of all jurisdictional facts; and</P> <P>(v) An express waiver of further procedural steps and all right to seek judicial review or otherwise challenge or contest the validity of the order.</P> <P>(b) Notwithstanding paragraph (a)(1) of this section, the respondent or Office of Chief Counsel may propose to settle the case. If the Chief Counsel agrees to a settlement, the respondent is notified and the case is closed without prejudice to the respondent.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended at 50 FR 45730, Nov. 1, 1985; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; 56 FR 15510, Apr. 17, 1991; Amdt. 107-29, 58 FR 51527, Oct. 1, 1993; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.329</SECTNO> <SUBJECT>Maximum penalties.</SUBJECT> <P>(a) A person who knowingly violates a requirement of the Federal hazardous material transportation law, an order issued thereunder, this subchapter, subchapter C of this chapter, or a special permit or approval issued under this subchapter applicable to the transportation of hazardous materials or the causing of them to be transported or shipped is liable for a civil penalty of not more than $55,000 and not less than $250 for each violation, except the maximum civil penalty is $110,000 if the violation results in death, serious illness or severe injury to any person or substantial destruction of property, and a minimum $495 civil penalty applies to a violation relating to training. When the violation is a continuing one, each day of the violation constitutes a separate offense.</P> <P>(b) A person who knowingly violates a requirement of the Federal hazardous material transportation law, an order issued thereunder, this subchapter, subchapter C of this chapter, or a special permit or approval issued under this subchapter applicable to the design, manufacture, fabrication, inspection, marking, maintenance, reconditioning, repair or testing of a package, container, or packaging component which is represented, marked, certified, or sold by that person as qualified for use in the transportation of hazardous materials in commerce is liable for a civil penalty of not more than $55,000 and not less than $250 for each violation, except the maximum <PRTPAGE P="42"/>civil penalty is $110,000 if the violation results in death, serious illness or severe injury to any person or substantial destruction of property, and a minimum $495 civil penalty applies to a violation relating to training.</P> <CITA>[71 FR 8487, Feb. 17, 2006, as amended at 74 FR 68702, Dec. 29, 2009; 75 FR 53596, Sept. 1, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.331</SECTNO> <SUBJECT>Assessment considerations.</SUBJECT> <P>After finding a knowing violation under this subpart, the Office of Chief Counsel assesses a civil penalty taking the following into account:</P> <P>(a) The nature and circumstances of the violation;</P> <P>(b) The extent and gravity of the violation;</P> <P>(c) The degree of the respondent's culpability;</P> <P>(d) The respondent's prior violations;</P> <P>(e) The respondent's ability to pay;</P> <P>(f) The effect on the respondent's ability to continue in business; and</P> <P>(g) Such other matters as justice may require.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-30, 58 FR 50500, Sept. 27, 1993; Amdt. 107-38, 61 FR 21100, May 9, 1996]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Criminal Penalties</HD> <SECTION> <SECTNO>§ 107.333</SECTNO> <SUBJECT>Criminal penalties generally.</SUBJECT> <P>A person who knowingly violates § 171.2(l) of this title or willfully or recklessly violates a requirement of the Federal hazardous material transportation law or a regulation, order, special permit, or approval issued thereunder shall be fined under title 18, United States Code, or imprisoned for not more than 5 years, or both, except the maximum amount of imprisonment shall be 10 years in any case in which the violation involves the release of a hazardous material which results in death or bodily injury to any person.</P> <CITA>[71 FR 8487, Feb. 17, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.335</SECTNO> <SUBJECT>Referral for prosecution.</SUBJECT> <P>If the Associate Administrator becomes aware of a possible willful violation of the Federal hazardous material transportation law, this subchapter, subchapter C of this chapter, or any special permit, or order issued thereunder, for which the Associate Administrator exercises enforcement responsibility, it shall report it to the Office of the Chief Counsel, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, Washington, DC 20590-0001. If appropriate, the Chief Counsel refers the report to the Department of Justice for criminal prosecution of the offender.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-24, 56 FR 8621, Feb. 28, 1991; 56 FR 15510, Apr. 17, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-35, 60 FR 49108, Sept. 21, 1995; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.336</SECTNO> <SUBJECT>Limitation on fines and penalties.</SUBJECT> <P>If a State or political subdivision or Indian tribe assesses any fine or penalty determined by the Secretary to be appropriate for a violation concerning a subject listed in § 107.202(a), no additional fine or penalty may be assessed for such violation by any other authority.</P> <CITA>[Amdt. 107-24, 56 FR 8624, Feb. 28, 1991]</CITA> </SECTION> </SUBJGRP> <SUBJGRP> <HD SOURCE="HED">Injunctive Action</HD> <SECTION> <SECTNO>§ 107.337</SECTNO> <SUBJECT>Injunctions generally.</SUBJECT> <P>Whenever it appears to the Office of Chief Counsel that a person has engaged, or is engaged, or is about to engage in any act or practice constituting a violation of any provision of the Federal hazardous material transportation law, this subchapter, subchapter C of this chapter, or any special permit, or order issued thereunder, for which the Office of Chief Counsel exercises enforcement responsibility, the Administrator, PHMSA, or his delegate, may request the Attorney General to bring an action in the appropriate United States District Court for such relief as is necessary or appropriate, including mandatory or prohibitive injunctive relief, interim equitable relief, and punitive damages as provided by 49 U.S.C. 5122(a).</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]</CITA> </SECTION> <SECTION> <PRTPAGE P="43"/> <SECTNO>§ 107.339</SECTNO> <SUBJECT>Imminent hazards.</SUBJECT> <P>Whenever it appears to the Office of the Chief Counsel that there is a substantial likelihood that death, serious illness, or severe personal injury will result from the transportation of a particular hazardous material or hazardous materials container, before a compliance order proceeding or other administrative hearing or formal proceeding to abate the risk of that harm can be completed, the Administrator, PHMSA, or his delegate, may bring an action under 49 U.S.C. 5122(b) in the appropriate United States District Court for an order suspending or restricting the transporation of that hazardous material or those containers or for such other equitable relief as is necessary or appropriate to ameliorate the hazard.</P> <CITA>[Amdt. 107-11, 48 FR 2651, Jan. 20, 1983, as amended by Amdt. 107-15, 51 FR 34987, Oct. 1, 1986; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994]</CITA> </SECTION> </SUBJGRP> <APPENDIX> <EAR>Pt. 107, Subpt. D, App. A</EAR> <HD SOURCE="HED">Appendix A to Subpart D of Part 107—Guidelines for Civil Penalties</HD> <P>I. This appendix sets forth the guidelines used by the Office of Hazardous Materials Safety (as of October 1, 2005) in making initial baseline determinations for recommending civil penalties. The first part of these guidelines is a list of baseline amounts or ranges for probable violations frequently cited in enforcement reports referred for action. Following the list of violations are general guidelines used by OHMS in making initial penalty determinations in enforcement cases.</P> <HD SOURCE="HD1">II. List of Frequently Cited Violations</HD> <GPOTABLE CDEF="s100,xs60,xls60" COLS="3" OPTS="L2"> <TTITLE>II—List of Frequently Cited Violations</TTITLE> <BOXHD> <CHED H="1">Violation description</CHED> <CHED H="1">Section or cite</CHED> <CHED H="1">Baseline assessment</CHED> </BOXHD> <ROW EXPSTB="02" RUL="s"> <ENT I="21"> <E T="02">General Requirements</E> </ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">A. Registration Requirements: Failure to register as an offeror or carrier of hazardous material and pay registration fee.</ENT> <ENT>107.608, 107.612</ENT> <ENT>$1,000 + $500 each additional year.</ENT> </ROW> <ROW> <ENT I="22">B. Training Requirements:</ENT> </ROW> <ROW> <ENT I="13">1. Failure to provide initial training to hazmat employees (general awareness, function-specific, safety, and security awareness training):</ENT> <ENT O="xl">172.702</ENT> </ROW> <ROW> <ENT I="05">a. More than 10 hazmat employees</ENT> <ENT/> <ENT>$700 and up each area.</ENT> </ROW> <ROW> <ENT I="05">b. 10 hazmat employees or fewer</ENT> <ENT/> <ENT>$450 and up each area.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to provide recurrent training to hazmat employees (general awareness, function-specific, safety, and security awareness training)</ENT> <ENT>172.702</ENT> <ENT>$450 and up each area.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to provide security training when a security plan is required but has not been developed</ENT> <ENT>172.702</ENT> <ENT>Included in penalty for no security plan.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to provide security training when a security plan has been developed but hazmat employees have not been trained concerning the security plan and its implementation</ENT> <ENT>172.702</ENT> <ENT>$2,500.</ENT> </ROW> <ROW> <ENT I="13">5. Failure to create and maintain training records:</ENT> <ENT O="xl">172.704</ENT> </ROW> <ROW> <ENT I="05">a. more than 10 hazmat employees</ENT> <ENT/> <ENT>$800 and up.</ENT> </ROW> <ROW> <ENT I="05">b. 10 hazmat employees or fewer</ENT> <ENT/> <ENT>$500 and up.</ENT> </ROW> <ROW> <ENT I="22">C. Security Plans:</ENT> </ROW> <ROW> <ENT I="13">1. Failure to develop a security plan; failure to adhere to security plan:</ENT> <ENT O="xl">172.800</ENT> </ROW> <ROW> <ENT I="05">a. § 172.504 table 1 materials</ENT> <ENT/> <ENT>$7,500.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group I</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group II</ENT> <ENT/> <ENT>$4,500.</ENT> </ROW> <ROW> <ENT I="05">d. Packing Group III</ENT> <ENT/> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03">2. Incomplete security plan or incomplete adherence (one or more of four required elements missing)</ENT> <ENT/> <ENT>One-quarter (25%) of above for each element.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to update a security plan to reflect changing circumstances</ENT> <ENT>172.802(b)</ENT> <ENT>One-third (33%) of baseline for no plan.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to put security plan in writing; failure to make all copies identical</ENT> <ENT>172.800(b)</ENT> <ENT>One-third (33%) of baseline for no plan.</ENT> </ROW> <ROW> <ENT I="22">D. Notification to a Foreign Shipper: Failure to provide information of HMR requirements applicable to a shipment of hazardous materials within the United States, to a foreign offeror or forwarding agent at the place of entry into the U.S.</ENT> <ENT>171.12(a)</ENT> <ENT>$1,500 to $7,500 (corresponding to violations by foreign offeror or forwarding agent).</ENT> </ROW> <ROW RUL="s"> <PRTPAGE P="44"/> <ENT I="22">E. Expired Exemption or Special Permit: Offering or transporting a hazardous material, or otherwise performing a function covered by an exemption or special permit, after expiration of the exemption or special permit</ENT> <ENT>171.2(a), (b), (c), Various</ENT> <ENT>$1,000 + $500 each additional year. </ENT> </ROW> <ROW EXPSTB="02" RUL="s"> <ENT I="21"> <E T="02">Offeror Requirements—All hazardous materials</E> </ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">A. Undeclared Shipment:</ENT> </ROW> <ROW> <ENT I="03">Offering for transportation a hazardous material without shipping papers, package markings, labels, or placards</ENT> <ENT>172.200, 172.300, 172.400, 172.500</ENT> <ENT>$15,000 and up.</ENT> </ROW> <ROW> <ENT I="22">B. Shipping Papers:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to provide a shipping paper for a shipment of hazardous materials</ENT> <ENT>172.201</ENT> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to follow one or more of the three approved formats for listing hazardous materials on a shipping paper</ENT> <ENT>172.201(a)(1)</ENT> <ENT>$1,200.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to retain shipping papers:</ENT> </ROW> <ROW> <ENT I="05">a. by an offeror, for two years after the date the shipment is provided to the carrier (or 3 years if the material is a hazardous waste)</ENT> </ROW> <ROW> <ENT I="05">b. by a carrier, for one year after the date the shipment is provided to the carrier (or 3 years if the material is a hazardous waste)</ENT> <ENT>172.201(e), 174.24(b), 175.30(a), 176.24(b), 177.817(f)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to include a proper shipping name in the shipping description or using an incorrect proper shipping name</ENT> <ENT>172.202</ENT> <ENT>$800 to $1,600.</ENT> </ROW> <ROW> <ENT I="03">5. Failure to include a hazard class/division number in the shipping description</ENT> <ENT>172.202</ENT> <ENT>$1,000 to $2,000.</ENT> </ROW> <ROW> <ENT I="03">6. Failure to include an identification number in the shipping description</ENT> <ENT>172.202</ENT> <ENT>$1,000 to $2,000.</ENT> </ROW> <ROW> <ENT I="03">7. Using an incorrect hazard class/identification number:</ENT> <ENT>172.202</ENT> </ROW> <ROW> <ENT I="05">a. that does not affect compatibility requirements</ENT> <ENT/> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="05">b. that affects compatibility requirements</ENT> <ENT/> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">8. Using an incorrect identification number:</ENT> <ENT>172.202.</ENT> </ROW> <ROW> <ENT I="05">a. that does not change the response information</ENT> <ENT/> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="05">b. that changes the response information</ENT> <ENT/> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">9. Failure to include the Packing Group, or using an incorrect Packing Group</ENT> <ENT>172.202</ENT> <ENT>$1,200.</ENT> </ROW> <ROW> <ENT I="03">10. Using a shipping description that includes additional unauthorized information (extra or incorrect words)</ENT> <ENT>172.202</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">11. Using a shipping description not in required sequence</ENT> <ENT>172.202</ENT> <ENT>$500.</ENT> </ROW> <ROW> <ENT I="03">12. Using a shipping description with two or more required elements missing or incorrect:</ENT> <ENT>172.202</ENT> </ROW> <ROW> <ENT I="05">a. such that the material is misdescribed</ENT> <ENT/> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="05">b. such that the material is misclassified</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="03">13. Failure to include the total quantity of hazardous material covered by a shipping description</ENT> <ENT>172.202(c)</ENT> <ENT>$500.</ENT> </ROW> <ROW> <ENT I="03">14. Failure to list an exemption or special permit number in association with the shipping description</ENT> <ENT>172.203(a)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">15. Failure to indicate “Limited Quantity” or “Ltd Qty” following the basic shipping description of a material offered for transportation as a limited quantity</ENT> <ENT>172.203(b)</ENT> <ENT>$500.</ENT> </ROW> <ROW> <ENT I="03">16. Failure to include “RQ” in the shipping description to identify a material that is a hazardous substance</ENT> <ENT>172.203(c)(2)</ENT> <ENT>$500.</ENT> </ROW> <ROW> <ENT I="03">17. Failure to include a required technical name in parenthesis for a listed generic or “n.o.s.” material</ENT> <ENT>172.203(k)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">18. Failure to include the required shipper's certification on a shipping paper</ENT> <ENT>172.204</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">19. Failure to sign the required shipper's certification on a shipping paper</ENT> <ENT>172.204</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="22">C. Emergency Response Information Requirements:</ENT> </ROW> <ROW> <ENT I="03">1. Providing or listing incorrect emergency response information with or on a shipping paper</ENT> <ENT>172.602</ENT> </ROW> <ROW> <ENT I="05">a. No significant difference in response</ENT> <ENT/> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="05">b. Significant difference in response</ENT> <ENT/> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to include an emergency response telephone number on a shipping paper</ENT> <ENT>172.604</ENT> <ENT>$2,600.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to have the emergency response telephone number monitored while a hazardous material is in transportation or listing multiple telephone numbers (without specifying the times for each) that are not monitored 24 hours a day</ENT> <ENT>172.604</ENT> <ENT>$1,300.</ENT> </ROW> <ROW> <ENT I="03">4. Listing an unauthorized emergency response telephone number on a shipping paper</ENT> <ENT>172.604</ENT> <ENT>$2,600 to $4,200.</ENT> </ROW> <ROW> <PRTPAGE P="45"/> <ENT I="03">5. Listing an incorrect or non-working emergency response telephone number on a shipping paper</ENT> <ENT>172.604</ENT> <ENT>$1,300.</ENT> </ROW> <ROW> <ENT I="03">6. Failure to provide required technical information when the listed emergency response telephone number is contacted</ENT> <ENT>172.604</ENT> <ENT>$1,300.</ENT> </ROW> <ROW> <ENT I="22">D. Package Marking Requirements:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to mark the proper shipping name on a package or marking an incorrect shipping name on a package</ENT> <ENT>172.301(a)</ENT> <ENT>$800 to $1,600.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to mark the identification number on a package</ENT> <ENT>172.301(a)</ENT> <ENT>$1,000 to $2,000.</ENT> </ROW> <ROW> <ENT I="03">3. Marking a package with an incorrect identification number</ENT> <ENT>172.301(a)</ENT> </ROW> <ROW> <ENT I="05">a. that does not change the response information</ENT> <ENT/> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="05">b. that changes the response information</ENT> <ENT/> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to mark the proper shipping name and identification number on a package</ENT> <ENT>172.301(a)</ENT> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">5. Marking a package with an incorrect shipping name and identification number</ENT> <ENT>172.301(a)</ENT> </ROW> <ROW> <ENT I="05">a. that does not change the response information</ENT> <ENT/> <ENT>$1,500 to $3,000.</ENT> </ROW> <ROW> <ENT I="05">b. that changes the response information</ENT> <ENT/> <ENT>$3,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">6. Failure to include the required technical name(s) in parenthesis for a listed generic or “n.o.s.” entry</ENT> <ENT>172.301(c)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">7. Marking a package as containing hazardous material when it contains no hazardous material</ENT> <ENT>172.303(a)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">8. Failure to locate required markings away from other markings that could reduce their effectiveness</ENT> <ENT>172.304(a)(4)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">9. Failure to mark a package containing liquid hazardous materials with required orientation marking</ENT> <ENT>172.312</ENT> <ENT>$2,500 to $3,500.</ENT> </ROW> <ROW> <ENT I="03">10. Failure to mark “RQ” on a non-bulk package containing a hazardous substance</ENT> <ENT>172.324(b)</ENT> <ENT>$500.</ENT> </ROW> <ROW> <ENT I="22">E. Package Labeling Requirements:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to label a package</ENT> <ENT>172.400</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">2. Placing a label that represents a hazard other than the hazard presented by the hazardous material in the package</ENT> <ENT>172.400</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">3. Placing a label on a package that does not contain a hazardous material</ENT> <ENT>172.401(a)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to place a required subsidiary label on a package</ENT> <ENT>172.402</ENT> <ENT>$500 to $2,500.</ENT> </ROW> <ROW> <ENT I="03">5. Placing a label on a different surface of the package than, or away from, the proper shipping name</ENT> <ENT>172.406(a)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">6. Placing an improper size label on a package</ENT> <ENT>172.407(c)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">7. Placing a label on a package that does not meet color specification requirements (depending on the variance)</ENT> <ENT>172.407(d)</ENT> <ENT>$600 to $2,500.</ENT> </ROW> <ROW> <ENT I="03">8. Failure to provide an appropriate class or division number on a label</ENT> <ENT>172.411</ENT> <ENT>$2,500.</ENT> </ROW> <ROW> <ENT I="22">F. Placarding Requirements:</ENT> </ROW> <ROW> <ENT I="03">Failure to properly placard a freight container or vehicle containing hazardous materials:</ENT> <ENT>172.504</ENT> </ROW> <ROW> <ENT I="05">a. when Table 1 is applicable</ENT> <ENT/> <ENT>$1,000 to $9,000.</ENT> </ROW> <ROW> <ENT I="05">b. when Table 2 is applicable</ENT> <ENT/> <ENT>$800 to $7,200.</ENT> </ROW> <ROW> <ENT I="22">G. Packaging Requirements:</ENT> </ROW> <ROW> <ENT I="03">1. Offering a hazardous material for transportation in an unauthorized non-UN standard or nonspecification packaging (includes failure to comply with the terms of an exemption or special permit authorizing use of a nonstandard or nonspecification packaging)</ENT> <ENT>Various</ENT> </ROW> <ROW> <ENT I="05">a. Packing Group I (and § 172.504 Table I materials)</ENT> <ENT/> <ENT>$9,000.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group II</ENT> <ENT/> <ENT>$7,000.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group III</ENT> <ENT/> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">2. Offering a hazardous material for transportation in a self-certified packaging that has not been subjected to design qualification testing:</ENT> <ENT>178.601 & Various</ENT> </ROW> <ROW> <ENT I="05">a. Packing Group I (and § 172.504 Table I materials)</ENT> <ENT/> <ENT>$10,800.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group II</ENT> <ENT/> <ENT>$8,400.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group III</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="03">3. Offering a hazardous material for transportation in a packaging that has been successfully tested to an applicable UN standard but is not marked with the required UN marking</ENT> <ENT>178.503(a)</ENT> <ENT>$3,600.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to close a UN standard packaging in accordance with the closure instructions</ENT> <ENT>173.22(a)(4)</ENT> <ENT>$2,500.</ENT> </ROW> <ROW> <ENT I="03" O="xl">5. Offering a hazardous material for transportation in a packaging that leaks during conditions normally incident to transportation:</ENT> <ENT>173.24(b)</ENT> </ROW> <ROW> <ENT I="05">a. Packing Group I (and § 172.504 Table I materials)</ENT> <ENT/> <ENT>$12,000.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group II</ENT> <ENT/> <ENT>$9,000.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group III</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="03" O="xl">6. Overfilling or underfilling a package so that the effectiveness is substantially reduced:</ENT> <ENT>173.24(b)</ENT> </ROW> <ROW> <PRTPAGE P="46"/> <ENT I="05">a. Packing Group I (and § 172.504 Table I materials)</ENT> <ENT/> <ENT>$9,000.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group II</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group III</ENT> <ENT/> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03" O="xl">7. Offering a hazardous material for transportation after October 1, 1996, in an unauthorized non-UN standard packaging marked as manufactured to a DOT specification:</ENT> <ENT>171.14</ENT> </ROW> <ROW> <ENT I="05">a. packaging meets DOT specification</ENT> <ENT/> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="05">b. packaging does not meet DOT specification</ENT> <ENT/> <ENT>$5,000 to $9,000.</ENT> </ROW> <ROW> <ENT I="03">8. Failure to mark an overpack with a statement that the inside packages comply with prescribed specifications or standards when specification or standard packaging is required</ENT> <ENT>173.25(a)(4)</ENT> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03">9. Filling an IBC or a portable tank (DOT, UN, or IM) that is out of test and offering hazardous materials for transportation in that IBC or portable tank</ENT> <ENT>173.32(a), 180.352, 180.605</ENT> </ROW> <ROW> <ENT I="05">a. All testing overdue</ENT> <ENT/> <ENT>$3,500 to $7,000.</ENT> </ROW> <ROW> <ENT I="05">b. Only periodic (5 year) test overdue</ENT> <ENT/> <ENT>$3,500.</ENT> </ROW> <ROW> <ENT I="05">c. Only intermediate periodic (2.5 year) tests overdue</ENT> <ENT/> <ENT>$3,500.</ENT> </ROW> <ROW RUL="s"> <ENT I="03">10. Failure to provide the required outage in a portable tank that results in a release of hazardous materials</ENT> <ENT>173.32(f)(6)</ENT> <ENT>$6,000 to $12,000. </ENT> </ROW> <ROW EXPSTB="02" RUL="s"> <ENT I="21"> <E T="02">Offeror Requirements—Specific hazardous materials</E> </ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">A. Cigarette Lighters:</ENT> </ROW> <ROW> <ENT I="03">Offering for transportation an unapproved cigarette lighter, lighter refill, or similar device, equipped with an ignition element and containing fuel</ENT> <ENT>173.21(i)</ENT> <ENT>$7,500.</ENT> </ROW> <ROW> <ENT I="22">B. Class 1—Explosives:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to mark the package with the EX number for each substance contained in the package or, alternatively, indicate the EX number for each substance in association with the description on the shipping description</ENT> <ENT>172.320</ENT> <ENT>$1,200.</ENT> </ROW> <ROW> <ENT I="03" O="xl">2. Offering an unapproved explosive for transportation:</ENT> <ENT>173.54, 173.56(b)</ENT> <ENT/> </ROW> <ROW> <ENT I="05">a. Div. 1.3 and 1.4 fireworks meeting the chemistry requirements (quantity and type) of APA Standard 87-1</ENT> <ENT/> <ENT>$5,000 to $10,000.</ENT> </ROW> <ROW> <ENT I="05">b. All other explosives (including forbidden)</ENT> <ENT/> <ENT>$10,000 and up.</ENT> </ROW> <ROW> <ENT I="03">3. Offering a leaking or damaged package of explosives for transportation</ENT> <ENT>173.54(c)</ENT> <ENT>$10,000 and up.</ENT> </ROW> <ROW> <ENT I="03">4. Packaging explosives in the same outer packaging with other materials</ENT> <ENT>173.61</ENT> <ENT>$2,500 to $5,000.</ENT> </ROW> <ROW> <ENT I="22">C. Class 7—Radioactive Materials:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to include required additional entries, or providing incorrect information for these additional entries</ENT> <ENT>172.203(d)</ENT> <ENT>$1,000 to $3,000.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to mark the gross mass on the outside of a package of Class 7 material that exceeds 110 pounds</ENT> <ENT>172.310(a)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to mark each package in letters at least 13 mm (<FR>1/2</FR> inch) high with the words “Type A” or “Type B” as appropriate</ENT> <ENT>172.310(b)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">4. Placing a label on Class 7 material that understates the proper label category</ENT> <ENT>172.403</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">5. Placing a label on Class 7 material that fails to contain (or has erroneous) entries for the name of the radionuclide(s), activity, and transport index</ENT> <ENT>172.403(g)</ENT> <ENT>$2,000 to $4,000.</ENT> </ROW> <ROW> <ENT I="03">6. Failure to meet one or more of the general design requirements for a package used to ship a Class 7 material</ENT> <ENT>173.410</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">7. Failure to comply with the industrial packaging (IP) requirements when offering a Class 7 material for transportation</ENT> <ENT>173.411</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">8. Failure to provide a tamper-indicating device on a Type A package used to ship a Class 7 material</ENT> <ENT>173.412(a)</ENT> <ENT>$2,000.</ENT> </ROW> <ROW> <ENT I="03">9. Failure to meet the additional design requirements of a Type A package used to ship a Class 7 material</ENT> <ENT>173.412(b)-(i)</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">10. Failure to meet the performance requirements for a Type A package used to ship a Class 7 material.</ENT> <ENT>173.412(j)-(l)</ENT> <ENT>$8,400.</ENT> </ROW> <ROW> <ENT I="03" O="xl">11. Offering a DOT specification 7A packaging without maintaining complete documentation of tests and an engineering evaluation or comparative data:</ENT> <ENT O="xl">173.415(a), 173.461</ENT> <ENT/> </ROW> <ROW> <ENT I="05">a. Tests and evaluation not performed</ENT> <ENT/> <ENT>$8,400.</ENT> </ROW> <ROW> <ENT I="05">b. Complete records not maintained</ENT> <ENT/> <ENT>$2,000 to $5,000.</ENT> </ROW> <ROW> <ENT I="03">12. Offering any Type B, Type B(U), Type B(M) packaging that failed to meet the approved DOT, NRC or DOE design, as applicable</ENT> <ENT>173.416</ENT> <ENT>$9,000.</ENT> </ROW> <ROW> <ENT I="03" O="xl">13. Offering a Type B packaging without holding a valid NRC approval certificate:</ENT> <ENT O="xl">173.471(a).</ENT> <ENT/> </ROW> <ROW> <ENT I="05">a. Never having obtained one</ENT> <ENT/> <ENT>$3,000.</ENT> </ROW> <ROW> <PRTPAGE P="47"/> <ENT I="05">b. Holding an expired certificate</ENT> <ENT/> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">14. Failure to meet one or more of the special requirements for a package used to ship uranium hexafluoride</ENT> <ENT>173.420</ENT> <ENT>$10,800.</ENT> </ROW> <ROW> <ENT I="03">15. Offering Class 7 material for transportation as a limited quantity without meeting the requirements for limited quantity</ENT> <ENT>173.421(a)</ENT> <ENT>$4,000.</ENT> </ROW> <ROW> <ENT I="03">16. Offering a multiple-hazard limited quantity Class 7 material without addressing the additional hazard</ENT> <ENT>173.423(a)</ENT> <ENT>$500 to $2,500.</ENT> </ROW> <ROW> <ENT I="03">17. Offering Class 7 low specific activity (LSA) materials or surface contaminated objects (SCO) with an external dose rate that exceeds an external radiation level of 1 rem/hr at 3 meters from the unshielded material</ENT> <ENT>173.427(a)(1)</ENT> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="03">18. Offering Class 7 LSA materials or SCO as exclusive use without providing specific instructions to the carrier for maintenance of exclusive use shipment controls</ENT> <ENT>173.427(a)(6)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">19. Offering in excess of Type A quantity of a Class 7 material in a Type A packaging</ENT> <ENT>173.431</ENT> <ENT>$12,000.</ENT> </ROW> <ROW> <ENT I="03">20. Offering a package that exceeds the permitted limits for surface radiation or transport index</ENT> <ENT>173.441</ENT> <ENT>$10,000 and up.</ENT> </ROW> <ROW> <ENT I="03">21. Offering a package without determining the level of removable external contamination, or that exceeds the limit for removable external contamination</ENT> <ENT>173.443</ENT> <ENT>$5,000 and up.</ENT> </ROW> <ROW> <ENT I="03">22. Storing packages of radioactive material in a group with a total transport index more than 50</ENT> <ENT>173.447(a)</ENT> <ENT>$5,000 and up.</ENT> </ROW> <ROW> <ENT I="03">23. Offering for transportation or transporting aboard a passenger aircraft any single package or overpack of Class 7 material with a transport index greater than 3.0</ENT> <ENT>173.448(e)</ENT> <ENT>$5,000 and up.</ENT> </ROW> <ROW> <ENT I="03">24. Exporting a Type B, Type B(U), Type B(M), or fissile package without obtaining a U.S. Competent Authority Certificate or, after obtaining a U.S. Competent Authority Certificate, failing to submit a copy to the national competent authority of each country into or through which the package is transported</ENT> <ENT>173.471(d)</ENT> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03">25. Offering special form radioactive materials without maintaining a complete safety analysis or Certificate of Competent Authority</ENT> <ENT>173.476(a), (b)</ENT> <ENT>$2,500.</ENT> </ROW> <ROW> <ENT I="22">D. Class 2—Compressed Gases in Cylinders:</ENT> <ENT O="xl"/> <ENT/> </ROW> <ROW> <ENT I="03">1. Filling and offering a cylinder with compressed gas when the cylinder is out of test</ENT> <ENT>173.301(a)(6)</ENT> <ENT>$4,200 to $10,400.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to check each day the pressure of a cylinder charged with acetylene that is representative of that day's compression, after the cylinder has cooled to a settled temperature, or failure to keep a record of this test for 30 days</ENT> <ENT>173.303(d)</ENT> <ENT>$5,000.</ENT> </ROW> <ROW RUL="s"> <ENT I="03">3. Offering a limited quantity of a compressed gas in a metal container for the purpose of propelling a nonpoisonous material and failure to heat the cylinder until the pressure is equivalent to the equilibrium pressure at 130 °F, without evidence of leakage, distortion, or other defect</ENT> <ENT>173.306(a)(3), (h)</ENT> <ENT>$1,500 to $6,000. </ENT> </ROW> <ROW EXPSTB="02" RUL="s"> <ENT I="21"> <E T="02">Manufacturing, Reconditioning, Retesting Requirements</E> </ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">A. Third-Party Packaging Certifiers (General):</ENT> </ROW> <ROW> <ENT I="03">Issuing a certification that directs the packaging manufacturer to improperly mark a packaging (e.g., steel drum to be marked UN 4G)</ENT> <ENT>171.2(e), 178.2(b), 178.3(a), 178.503(a)</ENT> <ENT>$500 per item.</ENT> </ROW> <ROW> <ENT I="22">B. Packaging Manufacturers (General):</ENT> </ROW> <ROW> <ENT I="03">1. Failure of a manufacturer or distributor to notify each person to whom the packaging is transferred of all the requirements not met at the time of transfer, including closure instructions</ENT> <ENT>178.2(c)</ENT> <ENT>$2,500.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to insure a packaging certified as meeting the UN standard is capable of passing the required performance testing</ENT> <ENT>178.601(b)</ENT> </ROW> <ROW> <ENT I="05">a. Packing Group I (and § 172.504 Table 1 materials)</ENT> <ENT/> <ENT>$10,800.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group II</ENT> <ENT/> <ENT>$8,400.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group III</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="03">3. Certifying a packaging as meeting a UN standard when design qualification testing was not performed</ENT> <ENT>178.601(d)</ENT> </ROW> <ROW> <ENT I="05">a. Packing Group I (and § 172.504 table 1 materials)</ENT> <ENT/> <ENT>$10,800.</ENT> </ROW> <ROW> <ENT I="05">b. Packing Group II</ENT> <ENT/> <ENT>$8,400.</ENT> </ROW> <ROW> <ENT I="05">c. Packing Group III</ENT> <ENT/> <ENT>$6,000.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to conduct periodic retesting on UN standard packaging (depending on length of time and Packing Group)</ENT> <ENT>178.601(e)</ENT> <ENT>$2,000 to $10,800.</ENT> </ROW> <ROW> <PRTPAGE P="48"/> <ENT I="03">5. Failure to properly conduct testing for UN standard packaging (<E T="03">e.g.,</E> testing with less weight than marked on packaging; drop testing from lesser height than required; failing to condition fiberboard boxes before design test):</ENT> </ROW> <ROW> <ENT I="05">a. Design qualification testing</ENT> <ENT>178.601(d)</ENT> <ENT>$2,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="05">b. Periodic retesting</ENT> <ENT>178.601(e)</ENT> <ENT>$500 to $10,800.</ENT> </ROW> <ROW> <ENT I="03">6. Marking, or causing the marking of, a packaging with the symbol of a manufacturer or packaging certifier other than the company that actually manufactured or certified the packaging</ENT> <ENT>178.2(b), 178.3(a), 178.503(a)(8)</ENT> <ENT>$7,200.</ENT> </ROW> <ROW> <ENT I="03">7. Failure to maintain testing records</ENT> <ENT>178.601(l)</ENT> </ROW> <ROW> <ENT I="05">a. Design qualification testing</ENT> <ENT/> <ENT>$1,000 to $5,000.</ENT> </ROW> <ROW> <ENT I="05">b. Periodic retesting</ENT> <ENT/> <ENT>$500 to $2,000.</ENT> </ROW> <ROW> <ENT I="03">8. Improper marking of UN certification</ENT> <ENT>178.503</ENT> <ENT>$500 per item.</ENT> </ROW> <ROW> <ENT I="03">9. Manufacturing DOT specification packaging after October 1, 1994 that is not marked as meeting a UN performance standard</ENT> <ENT>171.14</ENT> </ROW> <ROW> <ENT I="05">a. If packaging does meet DOT specification</ENT> <ENT/> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="05">b. If packaging does not meet DOT specification</ENT> <ENT/> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="22">C. Drum Manufacturers & Reconditioners:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to properly conduct production leakproofness test on a new or reconditioned drum</ENT> <ENT>178.604(b), (d), 173.28(b)(2)(i)</ENT> </ROW> <ROW> <ENT I="05">a. Improper testing</ENT> <ENT/> <ENT>$2,000.</ENT> </ROW> <ROW> <ENT I="05">b. No testing performed</ENT> <ENT/> <ENT>$3,000 to $5,000.</ENT> </ROW> <ROW> <ENT I="03">2. Marking an incorrect registration number on a reconditioned drum</ENT> <ENT>173.28(b)(2)(ii)</ENT> </ROW> <ROW> <ENT I="05">a. Incorrect number</ENT> <ENT/> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="05">b. Unauthorized use of another reconditioner's number</ENT> <ENT/> <ENT>$7,200.</ENT> </ROW> <ROW> <ENT I="03">3. Representing, marking, or certifying a drum as a reconditioned UN standard packaging when the drum does not meet a UN standard</ENT> <ENT>173.28(c), (d)</ENT> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="03">4. Representing, marking, or certifying a drum as altered from one UN standard to another, when the drum has not actually been altered</ENT> <ENT>173.28(d)</ENT> <ENT>$500.</ENT> </ROW> <ROW> <ENT I="22">D. IBC and Portable Tank Requalification:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to properly mark an IBC or portable tank with the most current retest and/or inspection information</ENT> <ENT>180.352(e), 178.703(b), 180.605(k)</ENT> <ENT>$500 per item.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to keep complete and accurate records of IBC or portable tank retest and reinspection</ENT> <ENT>180.352(f), 180.605(l)</ENT> </ROW> <ROW> <ENT I="05">a. No records kept</ENT> <ENT/> <ENT>$4,000.</ENT> </ROW> <ROW> <ENT I="05">b. Incomplete or inaccurate records</ENT> <ENT/> <ENT>$1,000 to $3,000.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to make reinspection and retest records available to a DOT representative upon request</ENT> <ENT>180.352(f), 49 U.S.C. 5121(b)(2)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="22">E. Cylinder Manufacturers & Rebuilders:</ENT> </ROW> <ROW> <ENT I="03">1. Manufacturing, representing, marking, certifying, or selling a DOT high-pressure cylinder that was not inspected and verified by an approved independent inspection agency</ENT> <ENT>Various</ENT> <ENT>$7,500 to $15,000.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to have a registration number or failure to mark the registration number on the cylinder</ENT> <ENT>Various</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">3. Marking another company's number on a cylinder</ENT> <ENT>Various</ENT> <ENT>$7,200.</ENT> </ROW> <ROW> <ENT I="03">4. Failure to mark the date of manufacture or lot number on a DOT-39 cylinder</ENT> <ENT>178.65(i)</ENT> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03">5. Failure to have a chemical analysis performed in the U.S. for a material manufactured outside the U.S./failure to obtain a chemical analysis from the foreign manufacturer</ENT> <ENT>Various</ENT> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="03">6. Failure to meet wall thickness requirements</ENT> <ENT>Various</ENT> <ENT>$7,500 to $15,000.</ENT> </ROW> <ROW> <ENT I="03">7. Failure to heat treat cylinders prior to testing</ENT> <ENT>Various</ENT> <ENT>$5,000 to $15,000.</ENT> </ROW> <ROW> <ENT I="03">8. Failure to conduct a complete visual internal examination</ENT> <ENT>Various</ENT> <ENT>$2,500 to $6,200.</ENT> </ROW> <ROW> <ENT I="03">9. Failure to conduct a hydrostatic test, or conducting a hydrostatic test with inaccurate test equipment</ENT> <ENT>Various</ENT> <ENT>$2,500 to $6,200.</ENT> </ROW> <ROW> <ENT I="03">10. Failure to conduct a flattening test</ENT> <ENT>Various</ENT> <ENT>$7,500 to $15,000.</ENT> </ROW> <ROW> <ENT I="03">11. Failure to conduct a burst test on a DOT-39 cylinder</ENT> <ENT>178.65(f)(2)</ENT> <ENT>$5,000 to $15,000.</ENT> </ROW> <ROW> <ENT I="03">12. Failure to have inspections and verifications performed by an inspector</ENT> <ENT>Various</ENT> <ENT>$7,500 to $15,000.</ENT> </ROW> <ROW> <ENT I="03">13. Failure to maintain required inspector's reports</ENT> <ENT>Various</ENT> </ROW> <ROW> <ENT I="05">a. No reports at all</ENT> <ENT/> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="05">b. Incomplete or inaccurate reports</ENT> <ENT/> <ENT>$1,000 to $4,000.</ENT> </ROW> <ROW> <ENT I="03">14. Representing a DOT-4 series cylinder as repaired or rebuilt to the requirements of the HMR without being authorized by the Associate Administrator</ENT> <ENT>180.211(a)</ENT> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="22">F. Cylinder Requalification:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to remark as DOT 3AL an aluminum cylinder manufactured under a former exemption or special permit</ENT> <ENT>173.23(c)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">2. Certifying or marking as retested a nonspecification cylinder</ENT> <ENT>180.205(a)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">3. Failure to have retester's identification number (RIN)</ENT> <ENT>180.205(b)</ENT> <ENT>$4,000.</ENT> </ROW> <ROW> <PRTPAGE P="49"/> <ENT I="03">4. Failure to have current authority due to failure to renew a retester's identification number (RIN)</ENT> <ENT>180.205(b)</ENT> <ENT>$2,000.</ENT> </ROW> <ROW> <ENT I="03">5. Failure to have a retester's identification number and marking another RIN on a cylinder</ENT> <ENT>180.205(b)</ENT> <ENT>$7,200.</ENT> </ROW> <ROW> <ENT I="03">6. Marking a RIN before successfully completing a hydrostatic retest</ENT> <ENT>180.205(b)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">7. Representing, marking, or certifying a cylinder as meeting the requirements of an exemption or special permit when the cylinder was not maintained or retested in accordance with the exemption or special permit</ENT> <ENT>171.2(c), (e), 180.205(c), Applicable Exemption or Special Permit</ENT> <ENT>$2,000 to $6,000.</ENT> </ROW> <ROW> <ENT I="03">8. Failure to conduct a complete visual external and internal examination</ENT> <ENT>180.205(f)</ENT> <ENT>$2,100 to $5,200.</ENT> </ROW> <ROW> <ENT I="03">9. Failure to conduct visual inspection or hydrostatic retest</ENT> <ENT>180.205(f) & (g)</ENT> <ENT>$4,200 to $10,400.</ENT> </ROW> <ROW> <ENT I="03">10. Performing hydrostatic retesting without confirming the accuracy of the test equipment</ENT> <ENT>180.205(g)(3)</ENT> <ENT>$2,100 to $5,200.</ENT> </ROW> <ROW> <ENT I="03">11. Failure to hold hydrostatic test pressure for 30 seconds or sufficiently longer to allow for complete expansion</ENT> <ENT>180.205(g)(5)</ENT> <ENT>$3,100.</ENT> </ROW> <ROW> <ENT I="03">12. Failure to perform a second retest, after equipment failure, at a pressure increased by the lesser of 10% or 100 psi (includes exceeding 90% of test pressure prior to conducting a retest)</ENT> <ENT>180.205(g)</ENT> <ENT>$3,100.</ENT> </ROW> <ROW> <ENT I="03">13. Failure to condemn a cylinder when required (<E T="03">e.g.,</E> permanent expansion of 10% [5% for certain exemption or special permit cylinders], internal or external corrosion, denting, bulging, evidence of rough usage)</ENT> <ENT>180.205(i)</ENT> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="03">14. Failure to properly mark a condemned cylinder or render it incapable of holding pressure</ENT> <ENT>180.205(i)(2)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">15. Failure to notify the cylinder owner in writing when a cylinder has been condemned</ENT> <ENT>180.205(i)(2)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="03">16. Failure to perform hydrostatic retesting at the minimum specified test pressure</ENT> <ENT>180.209(a)(1)</ENT> <ENT>$2,100 to $5,200.</ENT> </ROW> <ROW> <ENT I="03">17. Marking a star on a cylinder that does not qualify for that mark</ENT> <ENT>180.209(b)</ENT> <ENT>$2,000 to $4,000.</ENT> </ROW> <ROW> <ENT I="03">18. Marking a “+” sign on a cylinder without determining the average or minimum wall stress by calculation or reference to CGA Pamphlet C-5</ENT> <ENT>173.302a(b)</ENT> <ENT>$2,000 to $4,000.</ENT> </ROW> <ROW> <ENT I="03">19. Marking a cylinder in or on the sidewall when not permitted by the applicable specification</ENT> <ENT>180.213(b)</ENT> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="03">20. Failure to maintain legible markings on a cylinder</ENT> <ENT>180.213(b)(1)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">21. Marking a DOT 3HT cylinder with a steel stamp other than a low-stress steel stamp</ENT> <ENT>180.213(c)(2)</ENT> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="03">22. Improper marking of the RIN or retest date on a cylinder</ENT> <ENT>180.213(d)</ENT> <ENT>$800.</ENT> </ROW> <ROW> <ENT I="03">23. Marking an FRP cylinder with steel stamps in the FRP area of the cylinder such that the integrity of the cylinder is compromised</ENT> <ENT>Applicable Exemption or Special Permit</ENT> <ENT>$6,000 to $10,800.</ENT> </ROW> <ROW> <ENT I="03">24. Failure to maintain current copies of 49 CFR, DOT exemption or special permits, and CGA Pamphlets applicable to inspection, retesting, and marking activities</ENT> <ENT>180.215(a)</ENT> <ENT>$600 to $1,200.</ENT> </ROW> <ROW> <ENT I="03">25. Failure to keep complete and accurate records of cylinder reinspection and retest</ENT> <ENT>180.215(b)</ENT> </ROW> <ROW> <ENT I="05">a. No records kept</ENT> <ENT/> <ENT>$4,000.</ENT> </ROW> <ROW> <ENT I="05">b. Incomplete or inaccurate records</ENT> <ENT/> <ENT>$1,000 to $3,000.</ENT> </ROW> <ROW RUL="s"> <ENT I="03">26. Failure to report in writing a change in name, address, ownership, test equipment, management, or retester personnel</ENT> <ENT>171.2(c) & (e), Approval Letter</ENT> <ENT>$600 to $1,200. </ENT> </ROW> <ROW EXPSTB="02" RUL="s"> <ENT I="21"> <E T="02">Carrier Requirements</E> </ENT> </ROW> <ROW EXPSTB="00"> <ENT I="22">A. Incident Notification:</ENT> </ROW> <ROW> <ENT I="03">1. Failure to give immediate notification of a reportable hazardous materials incident</ENT> <ENT>171.15</ENT> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to file a written hazardous material incident report within 30 days following an unintentional release of hazardous materials in transportation (or other reportable incident)</ENT> <ENT>171.16</ENT> <ENT>$500 to $2,500.</ENT> </ROW> <ROW> <ENT I="22">B. Shipping Papers:</ENT> </ROW> <ROW> <ENT I="03">Failure to retain shipping papers for 375 days after a hazardous material (or 3 years for a hazardous waste) is accepted by the initial carrier</ENT> <ENT>174.24(b), 175.30(a)(2), 176.24(b), 177.817(f)</ENT> <ENT>$1,000.</ENT> </ROW> <ROW> <ENT I="22">C. Stowage/transportation Requirements:</ENT> </ROW> <ROW> <ENT I="03">1. Transporting packages of hazardous material that have not been secured against movement</ENT> <ENT>Various</ENT> <ENT>$3,000.</ENT> </ROW> <ROW> <ENT I="03">2. Failure to properly segregate hazardous materials</ENT> <ENT>Various</ENT> <ENT>$7,500 and up.</ENT> </ROW> <ROW> <PRTPAGE P="50"/> <ENT I="03">3. Transporting explosives in a motor vehicle containing metal or other articles or materials likely to damage the explosives or any package in which they are contained, without segregating in different parts of the load or securing them in place in or on the motor vehicle and separated by bulkheads or other suitable means to prevent damage</ENT> <ENT>177.835(i)</ENT> <ENT>$5,200.</ENT> </ROW> <ROW> <ENT I="03">4. Transporting railway track torpedoes outside of flagging kits, in violation of DOT-E 7991</ENT> <ENT>171.2(b) & (e)</ENT> <ENT>$7,000.</ENT> </ROW> <ROW> <ENT I="03">5. Transporting Class 7 (radioactive) material having a total transport index greater than 50</ENT> <ENT>177.842(a)</ENT> <ENT>$5,000 and up.</ENT> </ROW> <ROW> <ENT I="03">6. Transporting Class 7 (radioactive) material without maintaining the required separation distance</ENT> <ENT>177.842(b)</ENT> <ENT>$5,000 and up.</ENT> </ROW> <ROW> <ENT I="03">7. Failure to comply with requirements of an exemption or special permit authorizing the transportation of Class 7 (radioactive) material having a total transportation index of 50</ENT> <ENT>171.2(b) & (e)</ENT> </ROW> <ROW> <ENT I="05">a. Failure to have the required radiation survey record</ENT> <ENT/> <ENT>$5,000.</ENT> </ROW> <ROW> <ENT I="05">b. Failure to have other required documents</ENT> <ENT/> <ENT>$500 each.</ENT> </ROW> <ROW> <ENT I="05">c. Other violations</ENT> <ENT/> <ENT>$5,000 and up.</ENT> </ROW> </GPOTABLE> <HD SOURCE="HD1">III. Consideration of Statutory Criteria</HD> <P>A. These guidelines are used by the Office of Hazardous Materials Safety (OHMS) in setting initial proposed penalties for hazmat violations. They indicate baseline amounts or ranges for probable violations frequently cited in enforcement reports and set forth general OHMS policy for considering statutory criteria.</P> <P>B. The initial baseline determination partially considers the nature, extent, circumstances, and gravity of the alleged violation. That determination then is adjusted to consider all other evidence concerning the nature, extent, circumstances, and gravity of the alleged violation; degree of culpability; history of prior violations; ability to pay; effect of the penalty on ability to continue to do business; and such other matters as justice may require (a major component of which is corrective action taken by a respondent to prevent a recurrence of similar violations). In making a penalty recommendation, the baseline or range may be increased or decreased on the basis of evidence pertaining to these factors.</P> <P>C. The following miscellaneous factors are used to implement one or more of the statutory assessment criteria.</P> <HD SOURCE="HD1">IV. Miscellaneous Factors Affecting Penalty Amounts</HD> <HD SOURCE="HD2">A. Corrective Action</HD> <P>1. A proposed penalty is mitigated for documented corrective action of alleged violations taken by a respondent. Corrective action may occur: (1) After an inspection and before a Notice of Probable Violation (NOPV) is issued; (2) on receipt of an NOPV; or (3) after receipt of an NOPV (possibly after it is solicited by an PHMSA attorney). In general, corrective action may reduce a penalty up to 25%. Mitigation may be taken into account in the referral memo or may be recommended prior to issuance of an Order by PHMSA's Chief Counsel.</P> <P>2. The two primary factors in determining the penalty reduction are extent and timing of the corrective action. In other words, mitigation will be determined on the basis of how much corrective action was taken and when it was taken. Systemic action to prevent future violations is given greater consideration than action simply to remedy violations identified during the inspection.</P> <P>3. Mitigation is applied to individual violations. Thus, in a case with two violations, if corrective action for the first violation is more extensive than for the second, the penalty for the first will be mitigated more than that for the second.</P> <HD SOURCE="HD2">B. Respondents That Re-Ship</HD> <P>A shipper that reships materials received from another company, in the same packaging and without opening or altering the package, independently is responsible for ensuring that the shipment complies with Federal hazmat law, and independently may be subject to enforcement action if the package does not comply. Nevertheless, the reshipper is considered to have a lesser level of responsibility for compliance in those respects in which it reasonably relies on the compliance of the package as received. In most cases of this type, OHMS will discount the applicable baseline standard by about 25%. The specific knowledge and expertise of all parties must be considered in discounting for reliance on a prior shipper. This discount is applied before any consideration of mitigation based on corrective action.</P> <HD SOURCE="HD2">C. Penalty Increases for Multiple Counts</HD> <P>Under the Federal hazmat law, 49 U.S.C. 5123(a), each violation of the HMR and each day of a continuing violation (except for violations pertaining to packaging manufacture or qualification) is subject to a civil penalty <PRTPAGE P="51"/>of up to $55,000 or $110,000 for a violation occurring on or after January 1, 2010. Absent aggravating factors, OHMS, in its exercise of discretion, ordinarily will apply a single penalty for multiple counts or days of violation. In a number of cases, particularly those involving shippers, an inspector may cite two or more similar packaging violations for different hazardous materials. For example, the inspector may cite the same marking violation for two or more packages. OHMS usually will consider those additional violations as counts of the same violation and will not recommend multiples of the same baseline penalty. Rather, OHMS usually will recommend the baseline penalty for a single violation, increased by 25% for each additional violation.</P> <HD SOURCE="HD2">D. Financial Considerations</HD> <P>1. Mitigation is appropriate when the baseline penalty would (1) exceed an amount that the respondent is able to pay, or (2) have an adverse effect on the respondent's ability to continue in business. These criteria relate to a respondent's entire business, and not just the product line or part of its operations involved in the violation(s). Beyond the overall financial size of the respondent's business, the relevant items of information on a respondent's balance sheet include the current ratio (current assets to current liabilities), the nature of current assets, and net worth (total assets minus total liabilities).</P> <P>2. These figures are considered on a case-by-case basis. In general, however, a current ratio close to or below 1.0 means that the company may have difficulty in paying a large penalty, and may justify reduction of the penalty or an installment payment plan. A small amount of cash on hand representing limited liquidity, even with substantial other current assets (such as accounts receivable or inventory), may warrant a short-term payment plan. Respondent's income statement also will be reviewed to determine whether a payment plan is appropriate.</P> <P>3. Many companies are able to continue in business for extended periods of time with a small or negative net worth, and many respondents have paid substantial civil penalties in installments even though net worth was negative. For this reason, negative net worth alone does not always warrant reduction of a proposed penalty or even, in the absence of factors discussed above, a payment plan.</P> <P>4. In general, an installment payment plan may be justified where reduction of a proposed penalty is not, but the appropriateness of either (or both) will depend on the circumstances of the case. The length of a payment plan should be as short as possible, but the plan may consider seasonal fluctuations in a company's income if the company's business is seasonal (e.g., swimming pool chemical sales, fireworks sales) or if the company has documented specific reasons for current non-liquidity.</P> <P>5. Evidence of financial condition is used only to decrease a penalty, and not to increase it.</P> <HD SOURCE="HD2">E. Penalty Increases for Prior Violations</HD> <P>The baseline penalty presumes an absence of prior violations. If prior violations exist, generally they will serve to increase a proposed penalty. The general standards for increasing a baseline proposed penalty on the basis of prior violations are as follows:</P> <P>1. For each prior civil or criminal enforcement case—25% increase over the pre-mitigation recommended penalty.</P> <P>2. For each prior ticket—10% increase over the pre-mitigation recommended penalty.</P> <P>3. A baseline proposed penalty will not be increased more than 100% on the basis of prior violations.</P> <P>4. A case or ticket of prior violations initiated in a calendar year more than six years before the calendar year in which the current case is initiated normally will not be considered in determining a proposed penalty for the current violation(s).</P> <HD SOURCE="HD2">F. Penalty Increases for Use of Expired Special Permits</HD> <P>Adjustments to the base line figures for use of expired special permits can be made depending on how much material has been shipped during the period between the expiration date and the renewal date. If the company previously has been found to have operated under an expired special permit, the penalty is normally doubled. If the company has been previously cited for other violations, the penalty generally will be increased by about 25%.</P> <CITA>[Amdt. 107-33, 60 FR 12141, Mar. 6, 1995, as amended by Amdt. 107-40, 62 FR 2972, 2977, Jan. 21, 1997; 62 FR 51556, Oct. 1, 1997; 65 FR 58618, Sept. 29, 2000; 66 FR 45180, Aug. 28, 2001; 68 FR 52848, 52855, Sept. 8, 2003; 69 FR 54044, Sept. 7, 2004; 70 FR 56090, Sept. 23, 2005; 70 FR 73162, Dec. 9, 2005; 71 FR 8487, Feb. 17, 2006; 74 FR 53185, Oct. 16, 2009; 74 FR 68702, Dec. 29, 2009]</CITA> </APPENDIX> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—Designation of Approval and Certification Agencies</HD> <SECTION> <SECTNO>§ 107.401</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>(a) This subpart establishes procedures for the designation of agencies to <PRTPAGE P="52"/>issue approval certificates and certifications for types of packagings designed, manufactured, tested, or maintained in conformance with the requirements of this subchapter, subchapter C of this chapter, and standards set forth in the United Nations (U.N.) Recommendations (Transport of Dangerous Goods). Except for certifications of compliance with U.N. packaging standards, this subpart does not apply unless made applicable by a rule in subchapter C of this chapter.</P> <P>(b) The Associate Administrator may issue approval certificates and certifications addressed in paragraph (a) of this section.</P> <CITA>[Amdt. 107-31, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.402</SECTNO> <SUBJECT>Application for designation as an approval or certification agency.</SUBJECT> <P>(a) Any organization or person seeking designation as an approval or certification agency shall apply in writing to the Associate Administrator for Hazardous Materials Safety (PHH-32), Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington DC 20590-0001. Alternatively, the application with any attached supporting documentation in an appropriate format may be submitted by facsimile (fax) to: (202) 366-3753 or (202) 366-3308 or by electronic mail (e-mail) to: <E T="03">approvals@dot.gov.</E> Each application must be signed and certified to be correct by the applicant or, if the applicant is an organization, by an authorized officer or official representative of the organization. Any false statement or representation, or the knowing and willful concealment of a material fact, may subject the applicant to prosecution under the provisions of 18 U.S.C. 1001, result in the denial or termination of a designation.</P> <P>(b) Each application for designation must be in English and include the following information:</P> <P>(1) Name and address of the applicant, including place of incorporation if a corporation. In addition, if the applicant is not a resident of the United States, the name and address of a permanent resident of the United States designated in accordance with § 105.40 to serve as agent for service of process.</P> <P>(2) If the applicant's principal place of business is in a country other than the United States, a copy of the designation from the Competent Authority of that country delegating to the applicant an approval or designated agency authority for the type of packaging for which a DOT designation is sought, and a statement that the Competent Authority also delegates similar authority to U.S. Citizens or organizations having designations under this subpart from the PHMSA.</P> <P>(3) A listing, by DOT specification (or special permit) number, or U.N. designation, of the types of packagings for which approval authority is sought.</P> <P>(4) A personnel qualifications plan listing the qualifications that the applicant will require of each person to be used in the performance of each packaging approval or certification function. As a minimum, these qualifications must include:</P> <P>(i) The ability to review and evaluate design drawings, design and stress calculations;</P> <P>(ii) A knowledge of the applicable regulations of subchapter C of this chapter and, when applicable, U.N. standards; and</P> <P>(iii) The ability to conduct or monitor and evaluate test procedures and results; and</P> <P>(iv) The ability to review and evaluate the qualifications of materials and fabrication procedures.</P> <P>(5) A statement that the applicant will perform its functions independent of the manufacturers and owners of the packagings concerned.</P> <P>(6) A statement that the applicant will allow the Associate Administrator or his representative to inspect its records and facilities in so far as they relate to the approval or certification of specification packagings and shall cooperate in the conduct of such inspections.</P> <P>(c) The applicant shall furnish any additional information relevant to the <PRTPAGE P="53"/>applicant's qualifications, if requested by the Associate Administrator.</P> <CITA>[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985; 50 FR 16089, Apr. 24, 1985, as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.403</SECTNO> <SUBJECT>Designation of approval agencies.</SUBJECT> <P>(a) If the Associate Administrator determines that an application contains all the required information, the applicant is sent a letter of designation and assigned an identification code.</P> <P>(b) If the Associate Administrator determines that an application does not contain all the required information, the application is denied and the applicant is sent a written notice containing all the reasons for the denial.</P> <P>(c) Within 30 days of an initial denial of an application under paragraph (b) of this section, the applicant may file an amended application. If after considering the amended application, the Associate Administrator determines that it should be denied, he notifies the applicant, and the denial constitutes the final action of the Associate Administrator on the application. Within 60 days of receipt of the final denial the applicant may appeal the denial to the Administrator, PHMSA, setting forth in writing where the Associate Administrator for Hazardous Materials Safety erred in this determination.</P> <CITA>[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.404</SECTNO> <SUBJECT>Conditions of designation.</SUBJECT> <P>(a) Each designation made under this subpart contains the following conditions:</P> <P>(1) The designated approval or certification agency may use only testing equipment that it has determined, through personal inspection, to be suitable for the purpose.</P> <P>(2) Each approval certificate and certification issued by the designated approval agency must contain the name and identification code of the approval agency.</P> <P>(3) Each approval certificate and certification must be in a format acceptable to the Associate Administrator.</P> <P>(b) The designated approval agency shall notify the Associate Administrator within 20 days after the date there is any change in the information submitted under § 107.402.</P> <P>(c) The designated approval agency shall comply with all of the terms and conditions stated in its letter of designation under the subpart.</P> <P>(d) Nothing in this part relieves a manufacturer or owner of a packaging of responsibility for compliance with any of the applicable requirements of this title.</P> <CITA>[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.405</SECTNO> <SUBJECT>Termination of designation.</SUBJECT> <P>(a) Any designation issued under § 107.403 of this subchapter may be suspended or terminated if the Associate Administrator determines that:</P> <P>(1) The application for designation contained a misrepresentation, or the applicant willfully concealed a material fact.</P> <P>(2) The approval agency failed to comply with a term or condition stated in the agency's letter of designation.</P> <P>(3) The Competent Authority of an approval agency of a country outside the United States has failed to initiate, maintain or recognize a qualified U.S. approval agency.</P> <P>(b) Before a designation is suspended or terminated, the Associate Administrator shall give to the approval agency:</P> <P>(1) Written notice of the facts or conduct believed to warrant suspension or termination of the designation.</P> <P>(2) Sixty days in which to show in writing why the designation should not be suspended or terminated.</P> <CITA>[Amdt. 107-13, 50 FR 10062, Mar. 13, 1985, as amended by Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> </SUBPART> <SUBPART> <PRTPAGE P="54"/> <HD SOURCE="HED">Subpart F—Registration of Cargo Tank and Cargo Tank Motor Vehicle Manufacturers, Assemblers, Repairers, Inspectors, Testers, and Design Certifying Engineers</HD> <SECTION> <SECTNO>§ 107.501</SECTNO> <SUBJECT>Scope.</SUBJECT> <P>(a) This subpart establishes a registration procedure for persons who are engaged in the manufacture, assembly, inspection and testing, certification, or repair of a cargo tank or a cargo tank motor vehicle manufactured in accordance with a DOT specification under subchapter C of this chapter or under terms of a special permit issued under this part.</P> <P>(b) Persons engaged in continuing qualification and maintenance of cargo tanks and cargo tank motor vehicles must be familiar with the requirements set forth in part 180, subpart E, of this chapter.</P> <CITA>[Amdt. 107-20, 55 FR 37047, Sept. 7, 1990]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.502</SECTNO> <SUBJECT>General registration requirements.</SUBJECT> <P>(a) <E T="03">Definitions:</E> For purposes of this subpart—</P> <P>(1) <E T="03">Assembly</E> means the performance of any of the following functions when the function does not involve welding on the cargo tank wall:</P> <P>(i) The mounting of one or more tanks or cargo tanks on a motor vehicle or to a motor vehicle suspension component;</P> <P>(ii) The installation of equipment or components necessary to meet the specification requirements prior to the certification of the cargo tank motor vehicle; or</P> <P>(iii) The installation of linings, coatings, or other materials to the inside of a cargo tank wall.</P> <P>(2) The terms <E T="03">Authorized Inspector, Cargo tank, Cargo tank motor vehicle, Design Certifying Engineer, Registered Inspector,</E> and <E T="03">Person</E> are defined in § 171.8 of this chapter.</P> <P>(3) The terms <E T="03">cargo tank wall</E> and <E T="03">manufacturer</E> are defined in § 178.320(a), and <E T="03">repair</E> is defined in § 180.403 of this chapter.</P> <P>(b) No person may engage in the manufacture, assembly, certification, inspection or repair of a cargo tank or cargo tank motor vehicle manufactured under the terms of a DOT specification under subchapter C of this chapter or a special permit issued under this part unless the person is registered with the Department in accordance with the provisions of this subpart. A person employed as an inspector or design certifying engineer is considered to be registered if the person's employer is registered.</P> <P>(c) A person who performs functions which are subject to the provisions of this subpart may perform only those functions which have been identified to the Department in accordance with the procedures of this subpart.</P> <P>(d) Registration statements must be in English, contain all of the information required by this subpart, and be submitted to: FMCSA Hazardous Materials Division—MC-ECH, West Building, MC-ECH, 1200 New Jersey Avenue, SE., Washington, DC 20590.</P> <P>(e) Upon determination that a registration statement contains all the information required by this subpart, the Department will send the registrant a letter confirming receipt of the registration application and assigning a registration number to that person. A separate registration number will be assigned for each cargo tank manufacturing, assembly, repair facility or other place of business identified by the registrant.</P> <CITA>[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990, as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; Amdt. 107-28, 58 FR 46873, Sept. 3, 1993; Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 67 FR 61011, Sept. 27, 2002; 68 FR 19273, Apr. 18, 2003; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.503</SECTNO> <SUBJECT>Registration statement.</SUBJECT> <P>(a) Each registration statement must be in English and contain the following information:</P> <P>(1) Name;</P> <P>(2) Street address, mailing address and telephone number for each facility or place of business;</P> <P>(3) A statement indicating whether the facility uses mobile testing/inspection equipment to perform inspections, tests, or repairs at a location other than the address listed in paragraph (a)(2) of this section.<PRTPAGE P="55"/> </P> <P>(4) A statement signed by the person responsible for compliance with the applicable requirements of this chapter, certifying knowledge of those requirements and that each employee who is a Registered Inspector or Design Certifying Engineer meets the minimum qualification requirements set forth in § 171.8 of this chapter for “Registered Inspector” or “Design Certifying Engineer”. The following language may be used. </P> <EXTRACT> <P>I certify that all Registered Inspectors and Design Certifying Engineers used in performance of the prescribed functions meet the minimum qualification requirements set forth in 49 CFR 171.8, that I am the person responsible for ensuring compliance with the applicable requirements of this chapter, and that I have knowledge of the requirements applicable to the functions to be performed.</P> </EXTRACT> <P>(5) A description of the specific functions to be performed on cargo tanks or cargo tank motor vehicles, e.g.:</P> <P>(i) Manufacture,</P> <P>(ii) Assembly,</P> <P>(iii) Inspection and testing (specify type, e.g., external or internal visual inspection, lining inspection, hydrostatic pressure test, leakage test, thickness test),</P> <P>(iv) Certification,</P> <P>(v) Repair, or</P> <P>(vi) Equipment manufacture;</P> <P>(6) An identification of the types of DOT specification and special permit cargo tanks or cargo tank motor vehicles which the registrant intends to manufacture, assemble, repair, inspect, test or certify;</P> <P>(7) A statement indicating whether the registrant employs Registered Inspectors or Design Certifying Engineers to conduct certification, inspection or testing functions addressed by this subpart. If the registrant engages a person who is not an employee of the registrant to perform these functions, provide the name, address and registration number of that person; and</P> <P>(8) If the registrant is not a resident of the United States, the name and address of a permanent resident of the United States designated in accordance with § 105.40 to serve as agent for service of process.</P> <P>(b) In addition to the information required under paragraph (a) of this section, each person who manufactures a cargo tank or cargo tank motor vehicle must submit a copy of the manufacturer's current ASME Certificate of Authorization for the use of the ASME “U” stamp.</P> <P>(c) In addition to the information required under paragraph (a) of this section, each person who repairs a cargo tank or cargo tank motor vehicle must submit a copy of the repair facility's current National Board Certificate of Authorization for the use of the “R” stamp or ASME Certificate of Authorization for the use of the ASME “U” stamp. Any person who repairs MC-series cargo tanks which are not certified to the ASME Code must submit a copy of the National Board or ASME Certificate of Authorization to PHMSA before June 30, 1992.</P> <CITA>[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990; 57 FR 365, Jan. 6, 1992; Amdt. 107-32, 59 FR 49131, Sept. 26, 1994; Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 63 FR 52846, Oct. 1, 1998; 68 FR 19273, Apr. 18, 2003]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.504</SECTNO> <SUBJECT>Period of registration, updates, and record retention.</SUBJECT> <P>(a) Registration will be for a maximum of six years from the date of the original registration.</P> <P>(b) Any correspondence with the Department must contain the registrant's name and registration number.</P> <P>(c) A registration must be renewed every six years or within thirty days of reissuance of an ASME or National Board Certification, whichever occurs first, by submitting an up-to-date registration statement containing the information prescribed by § 107.503. Any person initially registered under the provisions of § 107.502 and who is in good standing is eligible for renewal.</P> <P>(d) A registrant shall provide written notification to the Department within thirty days of any of the following occurrences:</P> <P>(1) Any change in the registration information submitted under § 107.503;</P> <P>(2) Replacement of the person responsible for compliance with the requirements in § 107.503(a)(4). If this occurs, the registrant shall resubmit the required certification;</P> <P>(3) Loss of ASME or National Board Certificate of Authorization; or<PRTPAGE P="56"/> </P> <P>(4) A change in function; such as, from assembly to manufacture, an addition of a function, or a change to the types of inspections, tests or certifications of cargo tanks or cargo tank motor vehicles.</P> <P>(e) Each registrant shall maintain a current copy of the registration information submitted to the Department and a current copy of the registration number identification received from the Department at the location identified in § 107.503(a)(2) during such time the person is registered with the Department and for two years thereafter.</P> <P>(f) The issuance of a registration number under this subpart is not an approval or endorsement by the Department of the qualifications of any person to perform the specified functions.</P> <CITA>[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37048, Sept. 7, 1990, as amended by Amdt. 107-20, 56 FR 27875, June 17, 1991; Amdt. 107-37, 61 FR 18931, Apr. 29, 1996; 71 FR 54390, Sept. 14, 2006]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart G—Registration of Persons Who Offer or Transport Hazardous Materials</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. No. 107-26, 57 FR 30630, July 9, 1992, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 107.601</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>(a) The registration and fee requirements of this subpart apply to any person who offers for transportation, or transports, in foreign, interstate or intrastate commerce—</P> <P>(1) A highway route-controlled quantity of a Class 7 (radioactive) material, as defined in § 173.403 of this chapter;</P> <P>(2) More than 25 kg (55 pounds) of a Division 1.1, 1.2, or 1.3 (explosive) material (see § 173.50 of this chapter) in a motor vehicle, rail car or freight container;</P> <P>(3) More than one L (1.06 quarts) per package of a material extremely toxic by inhalation (<E T="03">i.e.,</E> “material poisonous by inhalation,” as defined in § 171.8 of this chapter, that meets the criteria for “hazard zone A,” as specified in §§ 173.116(a) or 173.133(a) of this chapter);</P> <P>(4) A shipment of a quantity of hazardous materials in a bulk packaging (see § 171.8 of this chapter) having a capacity equal to or greater than 13,248 L (3,500 gallons) for liquids or gases or more than 13.24 cubic meters (468 cubic feet) for solids;</P> <P>(5) A shipment in other than a bulk packaging of 2,268 kg (5,000 pounds) gross weight or more of one class of hazardous materials for which placarding of a vehicle, rail car, or freight container is required for that class, under the provisions of subpart F of part 172 of this chapter; or</P> <P>(6) Except as provided in paragraph (b) of this section, a quantity of hazardous material that requires placarding, under provisions of subpart F of part 172 of this chapter.</P> <P>(b) Paragraph (a)(6) of this section does not apply to those activities of a farmer, as defined in § 171.8 of this chapter, that are in direct support of the farmer's farming operations.</P> <P>(c) In this subpart, the term “shipment” means the offering or loading of hazardous material at one loading facility using one transport vehicle, or the transport of that transport vehicle.</P> <CITA>[65 FR 7309, Feb. 14, 2000, as amended at 67 FR 61011, Sept. 27, 2002]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.606</SECTNO> <SUBJECT>Exceptions.</SUBJECT> <P>(a) The following are excepted from the requirements of this subpart:</P> <P>(1) An agency of the Federal government.</P> <P>(2) A State agency.</P> <P>(3) An agency of a political subdivision of a State.</P> <P>(4) An Indian tribe.</P> <P>(5) An employee of any of those entities in paragraphs (a)(1) through (a)(4) of this section with respect to the employee's official duties.</P> <P>(6) A hazmat employee (including, for purposes of this subpart, the owner-operator of a motor vehicle that transports in commerce hazardous materials, if that vehicle at the time of those activities, is leased to a registered motor carrier under a 30-day or longer lease as prescribed in 49 CFR part 376 or an equivalent contractual agreement).</P> <P>(7) A person domiciled outside the United States, who offers solely from a location outside the United States, hazardous materials for transportation in commerce, <E T="03">provided</E> that the country of which such a person is a domiciliary does not require persons domiciled in <PRTPAGE P="57"/>the United States, who solely offer hazardous materials for transportation to the foreign country from places in the United States, to file a registration statement or to pay a registration fee.</P> <P>(b) Upon making a determination that persons domiciled in the United States, who offer hazardous materials for transportation to a foreign country solely from places in the United States, must file registration statements or pay fees to that foreign country, the U.S. Competent Authority will provide notice of such determination directly to the Competent Authority of that foreign country and by publication in the <E T="04">Federal Register.</E> Persons who offer hazardous materials for transportation to the United States from that foreign country must file a registration statement and pay the required fee no later than 60 days following publication of the determination in the <E T="04">Federal Register.</E> </P> <CITA>[Amdt 107-34, 60 FR 27233, May 23, 1995, as amended at 63 FR 52847, Oct. 1, 1998; 72 FR 24538, May 3, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.608</SECTNO> <SUBJECT>General registration requirements.</SUBJECT> <P>(a) Each person subject to this subpart must submit a complete and accurate registration statement on DOT Form F 5800.2 not later than June 30 for each registration year, or in time to comply with paragraph (b) of this section, whichever is later. Each registration year begins on July 1 and ends on June 30 of the following year.</P> <P>(b) No person required to file a registration statement may transport a hazardous material or cause a hazardous material to be transported or shipped, unless such person has on file, in accordance with § 107.620, a current Certificate of Registration in accordance with the requirements of this subpart.</P> <P>(c) A registrant whose name or principal place of business has changed during the year of registration must notify PHMSA of that change by submitting an amended registration statement not later than 30 days after the change.</P> <P>(d) Copies of DOT Form F 5800.2 and instructions for its completion may be obtained from the Hazardous Materials Registration Program, PHH-60, U.S. Department of Transportation, Washington, DC 20590-0001, by calling 617-494-2545 or 202-366-4109, or via the Internet at <E T="03">http://hazmat.dot.gov.</E> </P> <P>(e) If the registrant is not a resident of the United States, the registrant must attach to the registration statement the name and address of a permanent resident of the United States, designated in accordance with § 105.40, to serve as agent for service of process.</P> <CITA>[Amdt. No. 107-26, 57 FR 30630, July 9, 1992, as amended by Amdt. 107-31, 59 FR 32932, June 27, 1994; 65 FR 7309, Feb. 14, 2000; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.612</SECTNO> <SUBJECT>Amount of fee.</SUBJECT> <P>(a) For the registration year 2010-2011 and subsequent years, each person offering for transportation or transporting in commerce a material listed in § 107.601(a) must pay an annual registration fee, as follows:</P> <P>(1) <E T="03">Small business.</E> Each person that qualifies as a small business, under criteria specified in 13 CFR part 121 applicable to the North American Industry Classification System (NAICS) code that describes that person's primary commercial activity, must pay an annual registration fee of $250 and the processing fee required by paragraph (a)(4) of this section.</P> <P>(2) <E T="03">Not-for-profit organization.</E> Each not-for-profit organization must pay an annual registration fee of $250 and the processing fee required by paragraph (a)(4) of this section. A not-for-profit organization is an organization exempt from taxation under 26 U.S.C. 501(a).</P> <P>(3) <E T="03">Other than a small business or not-for-profit organization.</E> Each person that does not meet the criteria specified in paragraph (a)(1) or (a)(2) of this section must pay an annual registration fee of $2,575 and the processing fee required by paragraph (a)(4) of this section.</P> <P>(4) <E T="03">Processing fee.</E> The processing fee is $25 for each registration statement filed. A single statement may be filed for one, two, or three registration years as provided in § 107.616(c).</P> <P>(b) For registration years 2009-2010 and prior years, each person that offered for transportation or transported in commerce a material listed in § 107.601(a) during that year must pay the annual registration fee, including <PRTPAGE P="58"/>the processing fee, specified under the requirements of this subchapter in effect for the specific registration year.</P> <P>(c) <E T="03">Registration years 2003-2004, 2004-2005 and 2005-2006.</E> For registration years 2003-2004, 2004-2005, and 2005-2006, each person subject to the requirements of this subpart must pay an annual registration fee as follows:</P> <P>(1) <E T="03">Small business.</E> Each person that qualifies as a small business, under criteria specified in 13 CFR part 121 applicable to the North American Industry Classification System (NAICS) code that describes that person's primary commercial activity, must pay an annual registration fee of $125 and the processing fee required by paragraph (c)(4) of this section.</P> <P>(2) <E T="03">Not-for-profit organization.</E> Each not-for-profit organization must pay an annual registration fee of $125 and the processing fee required by paragraph (c)(4) of this section. A not-for-profit organization is an organization exempt from taxation under 26 U.S.C. 501(a).</P> <P>(3) <E T="03">Other than a small business or not-for-profit organization.</E> Each person that does not meet the criteria specified in paragraph (c)(1) or (c)(2) of this section must pay an annual registration fee of $275 and the processing fee required by paragraph (c)(4) of this section.</P> <P>(4) <E T="03">Processing fee.</E> The processing fee is $25 for each registration statement filed. A single statement may be filed for one, two, or three registration years as provided in § 107.616(c).</P> <P>(d) <E T="03">Registration years 2006-2007 and following.</E> For each registration year beginning with 2006-2007, each person subject to the requirements of this subpart must pay an annual fee as follows:</P> <P>(1) <E T="03">Small business.</E> Each person that qualifies as a small business, under criteria specified in 13 CFR part 121 applicable to the North American Industry Classification System (NAICS) code that describes that person's primary commercial activity, must pay an annual registration fee of $250 and the processing fee required by paragraph (d)(4) of this section.</P> <P>(2) <E T="03">Not-for-profit organization.</E> Each not-for-profit organization must pay an annual registration fee of $250 and the processing fee required by paragraph (d)(4) of this section. A not-for-profit organization is an organization exempt from taxation under 26 U.S.C. 501(a).</P> <P>(3) <E T="03">Other than a small business or not-for-profit organization.</E> Each person that does not meet the criteria specified in paragraph (d)(1) or (d)(2) of this section must pay an annual registration fee of $975 and the processing fee required by paragraph (d)(4) of this section.</P> <P>(4) <E T="03">Processing fee.</E> The processing fee is $25 for each registration statement filed. A single statement may be filed for one, two, or three registration years as provided in § 107.616(c).</P> <CITA>[65 FR 7309, Feb. 14, 2000, as amended at 67 FR 58345, Sept. 16, 2002; 68 FR 1345, Jan. 9, 2003; 75 FR 15619, Mar. 30, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.616</SECTNO> <SUBJECT>Payment procedures.</SUBJECT> <P>(a) Each person subject to the requirements of this subpart must mail the registration statement and payment in full to the U.S. Department of Transportation, Hazardous Materials Registration, P.O. Box 70985, Charlotte, NC 28272-0985, or submit the statement and payment electronically through the Department's e-Commerce Internet site. Access to this service is provided at <E T="03">http://hazmat.dot.gov/regs/register/register.htm.</E> A registrant required to file an amended registration statement under § 107.608(c) must mail it to the same address or submit it through the same Internet site.</P> <P>(b) Payment must be made by certified check, cashier's check, personal check, or money order in U.S. funds and drawn on a U.S. bank, payable to the U.S. Department of Transportation and identified as payment for the “Hazmat Registration Fee,” or by completing an authorization for payment by credit card or other electronic means of payment acceptable to the Department on the registration statement or as part of an Internet registration as provided in paragraph (a) of this section.</P> <P>(c) Payment must correspond to the total fees properly calculated in the “Amount Due” block of the DOT form F 5800.2. A person may elect to register and pay the required fees for up to three registration years by filing one <PRTPAGE P="59"/>complete and accurate registration statement.</P> <CITA>[Amdt. 107-26, 57 FR 30630, July 9, 1992, as amended by Amdt. 107-26, 58 FR 12545, Mar. 5, 1993; 65 FR 7310, Feb. 14, 2000; 67 FR 58345, Sept. 16, 2002; 68 FR 1346, Jan. 9, 2003; 71 FR 54390, Sept. 14, 2006; 72 FR 24538, May 3, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.620</SECTNO> <SUBJECT>Recordkeeping requirements.</SUBJECT> <P>(a) Each person subject to the requirements of this subpart, or its agent designated under § 107.608(e), must maintain at its principal place of business for a period of three years from the date of issuance of each Certificate of Registration:</P> <P>(1) A copy of the registration statement filed with PHMSA; and</P> <P>(2) The Certificate of Registration issued to the registrant by PHMSA.</P> <P>(b) After January 1, 1993, each motor carrier subject to the requirements of this subpart must carry a copy of its current Certificate of Registration issued by PHMSA or another document bearing the registration number identified as the “U.S. DOT Hazmat Reg. No.” on board each truck and truck tractor (not including trailers and semi-trailers) used to transport hazardous materials subject to the requirements of this subpart. The Certificate of Registration or document bearing the registration number must be made available, upon request, to enforcement personnel.</P> <P>(c) In addition to the requirements of paragraph (a) of this section, after January 1, 1995, each person who transports by vessel a hazardous material subject to the requirements of this subpart must carry on board the vessel a copy of its current Certificate of Registration or another document bearing the current registration number identified as the “U.S. DOT Hazmat Reg. No.”</P> <P>(d) Each person subject to this subpart must furnish its Certificate of Registration (or a copy thereof) and all other records and information pertaining to the information contained in the registration statement to an authorized representative or special agent of DOT upon request.</P> <CITA>[Amdt. No. 107-26, 57 FR 30630, July 9, 1992, as amended at 57 FR 37902, August 21, 1992; Amdt. 107-26, 58 FR 12545, Mar. 5, 1993; Amdt. 107-31, 59 FR 32932, June 27, 1994]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart H—Approvals, Registrations and Submissions</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. 107-38, 61 FR 21100, May 9, 1996, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 107.701</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>(a) This subpart prescribes procedures for the issuance, modification and termination of approvals, and the submission of registrations and reports, as required by this chapter.</P> <P>(b) The procedures of this subpart are in addition to any requirements in subchapter C of this chapter applicable to a specific approval, registration or report. If compliance with both a specific requirement of subchapter C of this chapter and a procedure of this subpart is not possible, the specific requirement applies.</P> <P>(c) Registration under subpart F or G of this part is not subject to the procedures of this subpart.</P> <CITA>[Amdt. 107-38, 61 FR 21100, May 9, 1996; Amdt. 107-38, 61 FR 27948, June 3, 1996]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.705</SECTNO> <SUBJECT>Registrations, reports, and applications for approval.</SUBJECT> <P>(a) A person filing a registration, report, or application for an approval, or a renewal or modification of an approval subject to the provisions of this subpart must—</P> <P>(1) File the registration, report, or application with the Associate Administrator for Hazardous Materials Safety (Attention: Approvals, PHH-32), Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001. Alternatively, the document with any attached supporting documentation in an appropriate format may be filed by facsimile (fax) to: (202) 366-3753 or (202) 366-3308 or by electronic mail (e-mail) to: <E T="03">approvals@dot.gov.</E> </P> <P>(2) Identify the section of the chapter under which the registration, report, or application is made;</P> <P>(3) If a report is required by an approval, a registration or a special permit, identify the approval, registration or special permit number;<PRTPAGE P="60"/> </P> <P>(4) Provide the name, street and mailing addresses, e-mail address optional, and telephone number of the person on whose behalf the registration, report, or application is made and, if different, the person making the filing;</P> <P>(5) If the person on whose behalf the filing is made is not a resident of the United States, provide a designation of agent for service in accordance with § 105.40;</P> <P>(6) Provide a description of the activity for which the registration or report is required; and</P> <P>(7) Provide additional information as requested by the Associate Administrator, if the Associate Administrator determines that a filing lacks pertinent information or otherwise does not comply with applicable requirements.</P> <P>(b) In addition to the provisions in paragraph (a) for an approval, an application for an approval, or an application for modification or renewal of an approval, the applicant must provide—</P> <P>(1) A description of the activity for which the approval is required;</P> <P>(2) The proposed duration of the approval;</P> <P>(3) The transport mode or modes affected, as applicable;</P> <P>(4) Any additional information specified in the section containing the approval; and</P> <P>(5) For an approval which provides exceptions from regulatory requirements or prohibitions—</P> <P>(i) Identification of any increased risk to safety or property that may result if the approval is granted, and specification of the measures that the applicant considers necessary or appropriate to address that risk; and</P> <P>(ii) Substantiation, with applicable analyses or evaluations, if appropriate, demonstrating that the proposed activity will achieve a level of safety that is at least equal to that required by the regulation.</P> <P>(c) For an approval with an expiration date, each application for renewal or modification must be filed in the same manner as an original application. If a complete and conforming renewal application is filed at least 60 days before the expiration date of an approval, the Associate Administrator, on written request from the applicant, will issue a written extension to permit operation under the terms of the expired approval until a final decision on the application for renewal has been made. Operation under an expired approval is prohibited absent a written extension. This paragraph does not limit the authority of the Associate Administrator to modify, suspend or terminate an approval under § 107.713.</P> <P>(d) To request confidential treatment for information contained in the application, the applicant shall comply with § 105.30(a).</P> <CITA>[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 65 FR 50457, Aug. 18, 2000; 67 FR 61011, Sept. 27, 2002; 70 FR 56090, Sept. 23, 2005; 70 FR 73162, Dec. 9, 2005; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.709</SECTNO> <SUBJECT>Processing of an application for approval, including an application for renewal or modification.</SUBJECT> <P>(a) No public hearing or other formal proceeding is required under this subpart before the disposition of an application.</P> <P>(b) At any time during the processing of an application, the Associate Administrator may request additional information from the applicant. If the applicant does not respond to a written request for additional information within 30 days of the date the request was received, the application may be deemed incomplete and denied. However, if the applicant responds in writing within the 30-day period requesting an additional 30 days within which it will gather the requested information, the Associate Administrator may grant the 30-day extension.</P> <P>(c) The Associate Administrator may grant or deny an application, in whole or in part. At the Associate Administrator's discretion, an application may be granted subject to provisions that are appropriate to protect health, safety and property. The Associate Administrator may impose additional provisions not specified in the application, or delete conditions in the application which are unnecessary.</P> <P>(d) The Associate Administrator may grant an application on finding that—</P> <P>(1) The application complies with this subpart;<PRTPAGE P="61"/> </P> <P>(2) The application demonstrates that the proposed activity will achieve a level of safety that—</P> <P>(i) Is at least equal to that required by the regulation, or</P> <P>(ii) If the regulations do not establish a level of safety, is consistent with the public interest and adequately will protect against the risks to life and property inherent in the transportation of hazardous materials in commerce;</P> <P>(3) The application states all material facts, and contains no materially false or materially misleading statement;</P> <P>(4) The applicant meets the qualifications required by applicable regulations; and</P> <P>(5) The applicant is fit to conduct the activity authorized by the approval, or renewal or modification of approval. This assessment may be based on information in the application, prior compliance history of the applicant, and other information available to the Associate Administrator.</P> <P>(e) Unless otherwise specified in this chapter or by the Associate Administrator, an approval in which a term is not specified does not expire.</P> <P>(f) The Associate Administrator notifies the applicant in writing of the decision on the application. A denial contains a brief statement of reasons.</P> </SECTION> <SECTION> <SECTNO>§ 107.711</SECTNO> <SUBJECT>Withdrawal.</SUBJECT> <P>An application may be withdrawn at any time before a decision to grant or deny it is made. Withdrawal of an application does not authorize the removal of any related records from the PHMSA dockets or files. Applications that are eligible for confidential treatment under § 105.30 will remain confidential after the application is withdrawn. The duration of this confidential treatment for trade secrets and commercial or financial information is indefinite, unless the party requesting the confidential treatment of the materials notifies the Associate Administrator that the confidential treatment is no longer required.</P> <CITA>[Amdt. 107-38, 61 FR 21100, May 9, 1996, as amended at 67 FR 61011, Sept. 27, 2002]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.713</SECTNO> <SUBJECT>Approval modification, suspension or termination.</SUBJECT> <P>(a) The Associate Administrator may modify an approval on finding that—</P> <P>(1) Modification is necessary to conform an existing approval to relevant statutes and regulations as they may be amended from time to time; or</P> <P>(2) Modification is required by changed circumstances to enable the approval to continue to meet the standards of § 107.709(d).</P> <P>(b) The Associate Administrator may modify, suspend or terminate an approval, as appropriate, on finding that—</P> <P>(1) Because of a change in circumstances, the approval no longer is needed or no longer would be granted if applied for;</P> <P>(2) The application contained inaccurate or incomplete information, and the approval would not have been granted had the application been accurate and complete;</P> <P>(3) The application contained deliberately inaccurate or incomplete information; or</P> <P>(4) The holder knowingly has violated the terms of the approval or an applicable requirement of this chapter in a manner demonstrating lack of fitness to conduct the activity for which the approval is required.</P> <P>(c) Except as provided in paragraph (d) of this section, before an approval is modified, suspended or terminated, the Associate Administrator notifies the holder in writing of the proposed action and the reasons for it, and provides an opportunity to show cause why the proposed action should not be taken.</P> <P>(1) The holder may file a written response with the Associate Administrator within 30 days of receipt of notice of the proposed action.</P> <P>(2) After considering the holder's or party's written response, or after 30 days have passed without response since receipt of the notice, the Associate Administrator notifies the holder in writing of the final decision with a brief statement of reasons.</P> <P>(d) The Associate Administrator, if necessary to avoid a risk of significant harm to persons or property, may in the notification declare the proposed action immediately effective.</P> </SECTION> <SECTION> <PRTPAGE P="62"/> <SECTNO>§ 107.715</SECTNO> <SUBJECT>Reconsideration.</SUBJECT> <P>(a) An applicant or a holder may request that the Associate Administrator reconsider a decision under § 107.709(f) or § 107.713(c). The request must:</P> <P>(1) Be in writing and filed within 20 days of receipt of the decision;</P> <P>(2) State in detail any alleged errors of fact and law;</P> <P>(3) Enclose any additional information needed to support the request to reconsider; and</P> <P>(4) State in detail the modification of the final decision sought.</P> <P>(b) The Associate Administrator considers newly submitted information on a showing that the information could not reasonably have been submitted during application processing.</P> <P>(c) The Associate Administrator grants or denies, in whole or in part, the relief requested and informs the requesting person in writing of the decision.</P> </SECTION> <SECTION> <SECTNO>§ 107.717</SECTNO> <SUBJECT>Appeal.</SUBJECT> <P>(a) A person who requested reconsideration under § 107.715 may appeal to the Administrator the Associate Administrator's decision on the request. The appeal must:</P> <P>(1) Be in writing and filed within 30 days of receipt of the Associate Administrator's decision on reconsideration;</P> <P>(2) State in detail any alleged errors of fact and law;</P> <P>(3) Enclose any additional information needed to support the appeal; and</P> <P>(4) State in detail the modification of the final decision sought.</P> <P>(b) The Administrator, if necessary to avoid a risk of significant harm to persons or property, may declare the Associate Administrator's action effective pending a decision on appeal.</P> <P>(c) The Administrator grants or denies, in whole or in part, the relief requested and informs the appellant in writing of the decision on appeal. The Administrator's decision on appeal is the final administrative action.</P> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart I—Approval of Independent Inspection Agencies, Cylinder Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>67 FR 51639, Aug. 8, 2002, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 107.801</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>(a) This subpart prescribes procedures for—</P> <P>(1) A person who seeks approval to be an independent inspection agency to perform tests, inspections, verifications and certifications of DOT specification cylinders or UN pressure receptacles as required by parts 178 and 180 of this chapter;</P> <P>(2) A person who seeks approval to engage in the requalification (<E T="03">e.g.</E> inspection, testing, or certification), rebuilding, or repair of a cylinder manufactured in accordance with a DOT specification or a pressure receptacle in accordance with a UN standard, under subchapter C of this chapter or under the terms of a special permit issued under this part;</P> <P>(3) A person who seeks approval to perform the manufacturing chemical analyses and tests of DOT specification cylinders, special permit cylinders, or UN pressure receptacles outside the United States.</P> <P>(b) No person may engage in a function identified in paragraph (a) of this section unless approved by the Associate Administratior in accordance with the provisions of this subpart. Each person must comply with the applicable requirements in this subpart. In addition, the procedural requirements in subpart H of this part apply to the filing, processing, and termination of an approval issued under this subpart.</P> <CITA>[67 FR 51639, Aug. 8, 2002, as amended at 71 FR 33873, June 12, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.803</SECTNO> <SUBJECT>Approval of an independent inspection agency (IIA).</SUBJECT> <P>(a) <E T="03">General.</E> Prior to performing cylinder inspections and verifications required by parts 178 and 180 of this chapter, a person must apply to the Associate Administrator for an approval as <PRTPAGE P="63"/>an independent inspection agency. A person approved as an independent inspection agency is not an PHMSA agent or representative.</P> <P>(b) <E T="03">Criteria.</E> No applicant for approval as an independent inspection agency may be engaged in the manufacture of cylinders for use in the transportation of hazardous materials, or be directly or indirectly controlled by, or have a financial involvement with, any entity that manufactures cylinders for use in the transportation of hazardous materials, except for providing services as an independent inspector.</P> <P>(c) <E T="03">Application information.</E> Each applicant must submit an application in conformance with § 107.705 containing the information prescribed in § 107.705(a). In addition, the application must contain the following information:</P> <P>(1) Name and address of each facility where tests and inspections are to be performed.</P> <P>(2) Detailed description of the inspection and testing facilities to be used by the applicant.</P> <P>(3) Detailed description of the applicant's qualifications and ability to perform the inspections and to verify the inspections required by part 178 of this chapter or under the terms of a special permit issued under this part.</P> <P>(4) Name, address, and principal business activity of each person having any direct or indirect ownership interest in the applicant greater than three percent and any direct or indirect ownership interest in each subsidiary or division of the applicant.</P> <P>(5) Name of each individual whom the applicant proposes to employ as an inspector and who will be responsible for certifying inspection and test results, and a statement of that person's qualifications.</P> <P>(6) An identification or qualification number assigned to each inspector who is supervised by a certifying inspector identified in paragraph (c)(3) of this section.</P> <P>(7) A statement that the applicant will perform its functions independent of the manufacturers and owners of the cylinders.</P> <P>(8) If the applicant's principal place of business is in a country other than the United States, the Associate Administrator may approve the applicant on the basis of an approval issued by the Competent Authority of the country of manufacture. The Competent Authority must maintain a current listing of approved IIAs and their identification marks. The applicant must provide a copy of the designation from the Competent Authority of that country delegating to the applicant an approval or designated agency authority for the type of packaging for which a DOT or UN designation is sought; and</P> <P>(9) The signature of the person certifying the approval application and the date on which it was signed.</P> <P>(d) <E T="03">Facility inspection.</E> Upon the request of the Associate Administrator, the applicant must allow the Associate Administrator or the Associate Administrator's designee to inspect the applicant's facilities and records. The person seeking approval must bear the cost of the inspection.</P> <P>(e) After approval, the Associate Administrator may authorize, upon request, the independent inspection agency to perform other inspections and functions for which the Associate Administrator finds the applicant to be qualified. Such additional authorizations will be noted on each inspection agency's approval documents.</P> <CITA>[67 FR 51639, Aug. 8, 2002, as amended at 68 FR 24659, May 8, 2003; 71 FR 33873, June 12, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.805</SECTNO> <SUBJECT>Approval of cylinder and pressure receptacle requalifiers.</SUBJECT> <P>(a) <E T="03">General.</E> A person must meet the requirements of this section to be approved to inspect, test, certify, repair, or rebuild a cylinder in accordance with a DOT specification or a UN pressure receptacle under subpart C of part 178 or subpart C of part 180 of this chapter, or under the terms of a special permit issued under this part.</P> <P>(b) <E T="03">Independent Inspection Agency Review.</E> Each applicant must arrange for an independent inspection agency, approved by the Associate Administrator pursuant to this subpart, to perform a review of its inspection or requalification operation. The person seeking approval must bear the cost of the inspection. A list of approved independent inspection agencies is available from the Associate Administrator at the address <PRTPAGE P="64"/>listed in § 107.705. Assistance in obtaining an approval is available from the same address.</P> <P>(c) <E T="03">Application for approval.</E> If the inspection performed by an independent inspection agency is completed with satisfactory results, the applicant must submit a letter of recommendation from the independent inspection agency, an inspection report, and an application containing the information prescribed in § 107.705(a). In addition, the application must contain—</P> <P>(1) The name of the facility manager;</P> <P>(2) The types of DOT specification or special permit cylinders, or UN pressure receptacles that will be inspected, tested, repaired, or rebuilt at the facility;</P> <P>(3) A certification that the facility will operate in compliance with the applicable requirements of subchapter C of this chapter; and</P> <P>(4) The signature of the person making the certification and the date on which it was signed.</P> <P>(d) <E T="03">Issuance of requalifier identification number (RIN).</E> The Associate Administrator issues a RIN as evidence of approval to requalify DOT specification or special permit cylinders, or UN pressure receptacles if it is determined, based on the applicant's submission and other available information, that the applicant's qualifications and, when applicable, facility are adequate to perform the requested functions in accordance with the criteria prescribed in subpart C of part 180 of this subchapter.</P> <P>(e) <E T="03">Expiration of RIN.</E> Unless otherwise provided in the issuance letter, an approval expires five years from the date of issuance, provided the applicant's facility and qualifications are maintained at or above the level observed at the time of inspection by the independent inspection agency, or at the date of the certification in the application for approval for requalifiers only performing inspections made under § 180.209(g) of this chapter.</P> <P>(f) <E T="03">Exceptions.</E> Notwithstanding the requirements in paragraphs (b) and (c) of this section, a person who only performs inspections in accordance with § 180.209(g) of this chapter may submit an application that, in addition to the information prescribed in § 107.705(a), identifies the DOT specification/special permit cylinders to be inspected; certifies the requalifier will operate in compliance with the applicable requirements of subchapter C of this chapter; certifies the persons performing inspections have been trained and have the information contained in each applicable CGA pamphlet incorporated by reference in § 171.7 of this chapter applicable to the requalifiers' activities; and includes the signature of the person making the certification and the date on which it was signed. Each person must comply with the applicable requirements in this subpart. In addition, the procedural requirements in subpart H of this part apply to the filing, processing and termination of an approval issued under this subpart. After May 31, 2004, no person may requalify a DOT specification/special permit cylinder in accordance with § 180.209(g) of this chapter unless that person has been issued a RIN as provided in paragraph (d) of this section.</P> <P>(g) Each holder of a current RIN shall report in writing any change in its name, address, ownership, testing equipment, or management or personnel performing any function under this section, to the Associate Administrator (PHH-32) within 20 days of the change.</P> <CITA>[67 FR 51639, Aug. 8, 2002, as amended at 68 FR 24659, May 8, 2003; 68 FR 55544, Sept. 26, 2003; 70 FR 56090, Sept. 23, 2005; 70 FR 73162, Dec. 9, 2005; 71 FR 33873, June 12, 2006]</CITA> </SECTION> <SECTION> <SECTNO>§ 107.807</SECTNO> <SUBJECT>Approval of non-domestic chemical analyses and tests.</SUBJECT> <P>(a) <E T="03">General.</E> A person who seeks to manufacture DOT specification or special permit cylinders outside the United States must seek an approval from the Associate Administrator to perform the chemical analyses and tests of those cylinders outside the United States.</P> <P>(b) <E T="03">Application for approval.</E> Each applicant must submit an application containing the information prescribed in § 107.705(a). In addition, the application must contain—</P> <P>(1) The name, address, and a description of each facility at which cylinders are to be manufactured and chemical analyses and tests are to be performed;<PRTPAGE P="65"/> </P> <P>(2) Complete details concerning the dimensions, materials of construction, wall thickness, water capacity, shape, type of joints, location and size of openings and other pertinent physical characteristics of each specification or special permit cylinder for which approval is being requested, including calculations for cylinder wall stress and wall thickness, which may be shown on a drawing or on separate sheets attached to a descriptive drawing;</P> <P>(3) The name of the independent inspection agency to be used; and</P> <P>(4) The signature of the person making the certification and the date on which it was signed.</P> <P>(c) <E T="03">Facility inspections.</E> Upon the request of the Associate Administrator, the applicant must allow the Associate Administrator or the Associate Administrator's designee to inspect the applicant's cylinder manufacturing and testing facilities and records, and must provide such materials and cylinders for analyses and tests as the Associate Administrator may specify. The applicant or holder must bear the cost of the initial and subsequent inspections, analyses, and tests.</P> </SECTION> <SECTION> <SECTNO>§ 107.809</SECTNO> <SUBJECT>Conditions of UN pressure receptacle approvals.</SUBJECT> <P>(a) Each approval issued under this subpart contains the following conditions:</P> <P>(1) Upon the request of the Associate Administrator, the applicant or holder must allow the Associate Administrator or the Associate Administrator's designee to inspect the applicant's pressure receptacle manufacturing and testing facilities and records, and must provide such materials and pressure receptacles for analyses and tests as the Associate Administrator may specify. The applicant or holder must bear the cost of the initial and subsequent inspections, analyses, and tests.</P> <P>(2) Each holder must comply with all of the terms and conditions stated in the approval letter issued under this subpart.</P> <P>(b) In addition to the conditions specified in § 107.713, an approval may be denied or if issued, suspended or terminated if the Competent Authority of the country of manufacture fails to initiate, maintain or recognize an IIA approved under this subpart; fails to recognize UN standard packagings manufactured in accordance with this subchapter; or implements a condition or limitation on United States citizens or organizations that is not required of its own citizenry.</P> <CITA>[71 FR 33874, June 12, 2006]</CITA> </SECTION> </SUBPART> </PART> <PART> <EAR>Pt. 110</EAR> <HD SOURCE="HED">PART 110—HAZARDOUS MATERIALS PUBLIC SECTOR TRAINING AND PLANNING GRANTS</HD> <CONTENTS> <SECHD>Sec.</SECHD> <SECTNO>110.1</SECTNO> <SUBJECT>Purpose.</SUBJECT> <SECTNO>110.5</SECTNO> <SUBJECT>Scope.</SUBJECT> <SECTNO>110.7</SECTNO> <SUBJECT>Control Number under the Paperwork Reduction Act.</SUBJECT> <SECTNO>110.10</SECTNO> <SUBJECT>Eligibility.</SUBJECT> <SECTNO>110.20</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>110.30</SECTNO> <SUBJECT>Grant application.</SUBJECT> <SECTNO>110.40</SECTNO> <SUBJECT>Activities eligible for funding.</SUBJECT> <SECTNO>110.50</SECTNO> <SUBJECT>Disbursement of Federal funds.</SUBJECT> <SECTNO>110.60</SECTNO> <SUBJECT>Cost sharing for planning and training.</SUBJECT> <SECTNO>110.70</SECTNO> <SUBJECT>Financial administration.</SUBJECT> <SECTNO>110.80</SECTNO> <SUBJECT>Procurement.</SUBJECT> <SECTNO>110.90</SECTNO> <SUBJECT>Grant monitoring, reports, and records retention.</SUBJECT> <SECTNO>110.100</SECTNO> <SUBJECT>Enforcement.</SUBJECT> <SECTNO>110.110</SECTNO> <SUBJECT>After-grant requirements.</SUBJECT> <SECTNO>110.120</SECTNO> <SUBJECT>Deviation from this part.</SUBJECT> <SECTNO>110.130</SECTNO> <SUBJECT>Disputes.</SUBJECT> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>49 U.S.C. 5101-5127; 49 CFR 1.53.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, unless otherwise noted.</P> </SOURCE> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to part 110 appear at 70 FR 56090, Sept. 23, 2005.</P> </EDNOTE> <SECTION> <SECTNO>§ 110.1</SECTNO> <SUBJECT>Purpose.</SUBJECT> <P>This part sets forth procedures for reimbursable grants for public sector planning and training in support of the emergency planning and training efforts of States, Indian tribes, and local communities to deal with hazardous materials emergencies, particularly those involving transportation. These grants will enhance the implementation of the Emergency Planning and Community Right-to-Know Act of 1986 (42 U.S.C. 11001).</P> </SECTION> <SECTION> <SECTNO>§ 110.5</SECTNO> <SUBJECT>Scope.</SUBJECT> <P>(a) This part applies to States and Indian tribes and contains the program requirements for public sector training <PRTPAGE P="66"/>and planning grants to support hazardous materials emergency planning and training efforts.</P> <P>(b) The requirements contained in 49 CFR part 18, “Uniform Administrative Requirements for Grants and Cooperative Agreements to State and Local Governments”, apply to grants issued under this part.</P> <P>(c) Copies of standard forms and OMB circulars referenced in this part are available from the HMTUSA Grants Manager, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington DC 20590-0001.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended at 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.7</SECTNO> <SUBJECT>Control Number under the Paperwork Reduction Act.</SUBJECT> <P>The Office of Management and Budget control number assigned to collection of information in §§ 110.30, 110.70, 110.80, and 110.90 is 2137-0586.</P> </SECTION> <SECTION> <SECTNO>§ 110.10</SECTNO> <SUBJECT>Eligibility.</SUBJECT> <P>This part applies to States and Indian tribes. States may apply for planning and training grants. Federally-recognized Indian tribes may apply for training grants.</P> </SECTION> <SECTION> <SECTNO>§ 110.20</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>Unless defined in this part, all terms defined in 49 U.S.C. 5102 are used in their statutory meaning and all terms defined in 49 CFR part 18 and OMB Circular A-102, with respect to administrative requirements for grants, are used as defined therein. Other terms used in this part are defined as follows:</P> <P> <E T="03">Allowable costs</E> means those costs that are: eligible, reasonable, necessary, and allocable to the project permitted by the appropriate Federal cost principles, and approved in the grant.</P> <P> <E T="03">Associate Administrator</E> means the Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration.</P> <P> <E T="03">Budget period</E> means the period of time specified in the grant agreement during which the project manager may expend or obligate project funds.</P> <P> <E T="03">Cost review</E> means the review and evaluation of costs to determine reasonableness, allocability, and allowability.</P> <P> <E T="03">Indian country</E> means Indian country as defined in 18 U.S.C. 1151. That section defines Indian country as all land within the limits of any reservation under the jurisdiction of the U.S. Government, notwithstanding the issuance of any patent, and, including rights-of-way running through the reservation; all dependent Indian communities within the borders of the United States whether within the original or subsequently acquired territory thereof, and whether within or without the limits of a State; and all Indian allotments, the Indian titles to which have not been extinguished, including rights-of-way running through the same.</P> <P> <E T="03">Indian tribe</E> means a tribe “Federally-recognized” by the Secretary of the Interior under 25 CFR 272.2.</P> <P> <E T="03">Local Emergency Planning Committee (LEPC)</E> means a committee appointed by the State Emergency Response Commission under section 301(c) of the Emergency Planning and Community Right-to-Know Act of 1986 (42 U.S.C. 11001(c)) that includes at a minimum, representatives from each of the following groups or organizations: elected State and local officials; law enforcement, firefighting, civil defense, first aid, health, local environmental, hospital, and transportation personnel; broadcast and print media; community groups; and owners and operators of facilities subject to the emergency planning requirements.</P> <P> <E T="03">National curriculum</E> means the curriculum required to be developed under 49 U.S.C. 5115 and necessary to train public sector emergency response and preparedness teams, enabling them to comply with performance standards as stated in 49 U.S.C. 5115(c).</P> <P> <E T="03">Political subdivision</E> means a county, municipality, city, town, township, local public authority (including any public and Indian housing agency under the United States Housing Act of 1937 (42 U.S.C. 1401 <E T="03">et seq.</E>), school district, special district, intrastate district, council of governments (whether or not incorporated as a nonprofit corporation under State law), any other regional or interstate government entity, or any agency or instrumentality of a local government.<PRTPAGE P="67"/> </P> <P> <E T="03">Project</E> means the activities and tasks identified in the grant agreement.</P> <P> <E T="03">Project manager</E> means the State or Indian tribal official designated in a grant as the recipient agency's principal program contact with the Federal Government.</P> <P> <E T="03">Project officer</E> means the Federal official designated in a grant as the program contact with the project manager. The project officer is responsible for monitoring the project.</P> <P> <E T="03">Project period</E> means the length of time specified in a grant for completion of all work associated with that project.</P> <P> <E T="03">State Emergency Response Commission (SERC)</E> means the State Emergency Response Commission appointed by the Governor of each State and Territory under the Emergency Planning and Community Right-to-Know Act of 1986.</P> <P> <E T="03">Statement of Work</E> means that portion of a grant that describes the purpose and scope of activities and tasks to be carried out as part of the proposed project.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59 FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.30</SECTNO> <SUBJECT>Grant application.</SUBJECT> <P>(a) <E T="03">General.</E> An applicant for a planning or training grant shall use only the standard application forms approved by the Office of Management and Budget (OMB) (SF-424 and SF-424A) under the Paperwork Reduction Act of 1980 (44 U.S.C. 3502). Applicants are required to submit an original and two copies of the application package to: Grants Manager, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001. Applications received on or before January 1st and July 1st of each year will be considered in that cycle of the semi-annual review and award process. An initial round of the review and award process will consider applications received on or before November 15, 1992. Requests and continuation applications must include an original and two copies of the affected pages; previously submitted pages with information that is still current do not have to be resubmitted. The application must include the following:</P> <P>(1) Application for Federal Assistance for non-construction programs (SF-424) and Budget sheets (SF-424A). A single application may be used for both planning and training if the budgets for each are entered separately on all budget sheets.</P> <P>(2) For States, a letter from the Governor designating the State agency that is authorized to apply for a grant and to provide the written certifications required to receive a grant.</P> <P>(3) For Indian tribes, a letter from the tribal government, governing body, or tribal council to the effect that the applicant is authorized to apply for a grant and to provide the written certifications required to receive a grant.</P> <P>(4) A written statement explaining whether the State or tribe assesses and collects fees on the transportation of hazardous materials and whether such assessments or fees are used solely to carry out purposes related to the transportation of hazardous materials.</P> <P>(5) A statement designating a project manager and providing the name, position, address and phone number of that individual who will be responsible for coordinating the funded activities with other agencies/organizations.</P> <P>(6) A project narrative statement of the goals and objectives of the proposed project, project design, and long range plans. The proposed grant project and budget periods may be one or more years.</P> <P>(7) A statement of work in support of the proposed project that describes and sets priorities for the activities and tasks to be conducted, the costs associated with each activity, the number and types of deliverables and products to be completed, and a schedule for implementation.</P> <P>(8) A description of the major items of costs needed to implement the statement of work and a copy of any cost or price analysis if conducted.</P> <P>(9) <E T="03">Drug-Free Workplace Certification.</E> The applicant must certify as specified in appendix C of 49 CFR part 29 that it will comply with the Drug-Free Workplace Act of 1988 (Pub. L. 100-690, title V, subtitle D; 51 U.S.C. 701 <E T="03">et seq.</E>).</P> <P>(10) <E T="03">Anti-Lobbying Certification.</E> The applicant must certify as specified in <PRTPAGE P="68"/>appendix A of 49 CFR part 20 that no Federal funds will be expended to pay any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress (section 319 of Pub. L. 101-121, 31 U.S.C. 1352).</P> <P>(11) <E T="03">Debarment and Suspension Certification.</E> The applicant must certify as specified in subpart G of 49 CFR part 29 that it will not make an award or permit any award to any party which is debarred or suspended or is otherwise excluded from or ineligible for participation in Federal assistance programs.</P> <P>(b) <E T="03">Planning.</E> In addition to the requirements specified in paragraph (a) of this section, eligible State applicants must include the following in their application package:</P> <P>(1) A written certification that the State is complying with sections 301 and 303 of the Emergency Planning and Community Right-to-Know Act of 1986, including a brief explanation of how compliance has been achieved.</P> <P>(2) A written statement specifying the aggregate expenditure of funds of the State, exclusive of Federal funds, for each of its last five fiscal years for developing, improving, and implementing emergency plans under the Emergency Planning and Community Right-to-Know Act of 1986, including an explanation specifying the sources of these funds. A written certification that the State's aggregate expenditures, as defined by the State, of funds for this purpose, exclusive of Federal funds, will not fall below the average level of its expenditures for its last five fiscal years. The applicant may not claim any of these expenditures for cost-sharing.</P> <P>(3) A written statement agreeing to make at least 75 percent of the Federal funds awarded available to LEPCs and an explanation of how the applicant intends to make such funds available to them for developing, improving, or implementing emergency plans.</P> <P>(4) Designation of a project manager to serve as contact for coordinating planning funds under this program.</P> <P>(5) A project narrative statement of the goals and objectives of each proposed project, including the following:</P> <P>(i) A background statement describing the applicant's long-term goals and objectives with respect to:</P> <P>(A) The current abilities and authorities of the applicant's program for preparedness planning;</P> <P>(B) The need to sustain or increase program capability;</P> <P>(C) Current degree of participation in or intention to assess the need for a regional hazardous materials emergency response team; and</P> <P>(D) The impact that the grant will have on the program.</P> <P>(ii) A discussion of whether the applicant's program currently knows, or intends to assess, transportation flow patterns of hazardous materials within the State and between that State and another State.</P> <P>(iii) A schedule for implementing the proposed grant activities.</P> <P>(iv) A statement describing the ways in which planning will be monitored by the project manager.</P> <P>(v) A statement indicating that all members of the State Emergency Response Commission were provided the opportunity to review the grant application.</P> <P>(c) <E T="03">Training.</E> In addition to the requirements specified in paragraph (a) of this section, eligible State and Indian tribe applicants must include the following in their application package:</P> <P>(1) For a State applicant, a written certification explaining how the State is complying with sections 301 and 303 of the Emergency Planning and Community Right-to-Know Act.</P> <P>(2) A written statement specifying the aggregate expenditure of funds of the State or Indian tribe, exclusive of Federal funds, for each of its last five fiscal years for training public sector employees to respond to accidents and incidents involving hazardous materials, including an explanation specifying the sources of these funds. A written certification that the applicant's aggregate expenditure, as defined by the State or tribe, of funds for this purpose, exclusive of Federal funds, will not fall below the average level of its expenditures for its last five fiscal years. The applicant may not claim any of these expenditures for cost-sharing purposes.<PRTPAGE P="69"/> </P> <P>(3) For a State applicant, a written statement agreeing to make at least 75 percent of the Federal funds awarded available for the purpose of training public sector employees employed or used by political subdivisions. A State applicant may elect to pass all or some portion of the grant on to political subdivisions for this purpose. The applicant must include a specific explanation of how it intends to meet this requirement.</P> <P>(4) Designation of a primary point of contact for coordinating training funded under this program. Identification of a single repository for copies of course materials delivered under the grant as specified in § 110.90 of this part.</P> <P>(5) A project narrative statement of the long-range goals and objectives of each proposed project, including the following:</P> <P>(i) A background statement describing:</P> <P>(A) The current hazardous materials training program(s);</P> <P>(B) Training audience, including numbers and levels of training and accreditation program for each level or criterion required to advance to the next level;</P> <P>(C) Estimated total number of persons to be trained under the proposed project;</P> <P>(D) The ways in which training grants will support the integrated delivery of training to meet the needs of individualized geographic and resource needs and time considerations of local responders. When appropriate, a statement describing how the proposed project will accommodate the different training needs for rural versus urban environments; and</P> <P>(E) The impact that the grant and the National Curriculum will have on the program.</P> <P>(ii) A statement describing how the National Curriculum will be used or modified to train public sector employees at the local level to respond to accidents and incidents involving hazardous materials.</P> <P>(iii) A statement describing the ways in which effectiveness of training will be monitored by the project manager, including, but not limited to, examinations, critiques, and instructor evaluations.</P> <P>(iv) A schedule for implementing the proposed training grant activities.</P> <P>(v) A statement indicating that all members of the State or Tribal Emergency Response Commission were provided the opportunity to review the grant application.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59 FR 49132, Sept. 26, 1994; 70 FR 73162, Dec. 9, 2005; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.40</SECTNO> <SUBJECT>Activities eligible for funding.</SUBJECT> <P>(a) <E T="03">Planning.</E> Eligible State applicants may receive funding for the following activities:</P> <P>(1) Development, improvement, and implementation of emergency plans required under the Emergency Planning and Community Right-to-Know Act of 1986, as well as exercises which test the emergency plan. Enhancement of emergency plans to include hazard analysis as well as response procedures for emergencies involving transportation of hazardous materials, including radioactive materials.</P> <P>(2) An assessment to determine flow patterns of hazardous materials within a State, between a State and another State or Indian country, and development and maintenance of a system to keep such information current.</P> <P>(3) An assessment of the need for regional hazardous materials emergency response teams.</P> <P>(4) An assessment of local response capabilities.</P> <P>(5) Conduct of emergency response drills and exercises associated with emergency preparedness plans.</P> <P>(6) Provision of technical staff to support the planning effort.</P> <P>(7) Additional activities the Associate Administrator deems appropriate to implement the scope of work for the proposed project plan and approved in the grant.</P> <P>(b) <E T="03">Training.</E> Eligible State and Indian tribe applicants may receive funding for the following activities:</P> <P>(1) An assessment to determine the number of public sector employees employed or used by a political subdivision who need the proposed training and to select courses consistent with the National Curriculum.<PRTPAGE P="70"/> </P> <P>(2) Delivery of comprehensive preparedness and response training to public sector employees. Design and delivery of preparedness and response training to meet specialized needs. Financial assistance for trainees and for the trainers, if appropriate, such as tuition, travel expenses to and from a training facility, and room and board while at the training facility.</P> <P>(3) Emergency response drills and exercises associated with training, a course of study, and tests and evaluation of emergency preparedness plans.</P> <P>(4) Expenses associated with training by a person (including a department, agency, or instrumentality of a State or political subdivision thereof or an Indian tribe) and activities necessary to monitor such training including, but not limited to examinations, critiques and instructor evaluations.</P> <P>(5) Provision of staff to manage the training effort designed to result in increased benefits, proficiency, and rapid deployment of local and regional responders.</P> <P>(6) Additional activities the Associate Administrator deems appropriate to implement the scope of work for the proposed project and approved in the grant.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.50</SECTNO> <SUBJECT>Disbursement of Federal funds.</SUBJECT> <P>(a) Preaward expenditures may not be reimbursed.</P> <P>(b) Reimbursement may not be made for a project plan unless approved in the grant award.</P> <P>(c) If a recipient agency seeks additional funds, the amendment request will be evaluated on the basis of needs, performance and availability of funds. An existing grant is not a commitment of future Federal funding.</P> </SECTION> <SECTION> <SECTNO>§ 110.60</SECTNO> <SUBJECT>Cost sharing for planning and training.</SUBJECT> <P>(a) The recipient agency must provide 20 percent of the direct and indirect costs of all activities covered under the grant award program with non-Federal funds. Recipients may either use cash (hard-match), in-kind (soft-match) contributions, or a combination of in-kind plus hard-match to meet this requirement. In-kind (soft-match) contributions are in addition to the maintenance of effort required of recipients of grant awards. The types of contributions allowed are as follows:</P> <P>(1) Any funds from a State, local, or other non-Federal source used for an eligible activity as defined in § 110.40 in this part.</P> <P>(2) The dollar equivalent value of an eligible activity as defined in § 110.40 of this part provided by a State, local, or other non-Federal source.</P> <P>(3) The value of participants' salary while attending a planning or training activity contained in the approved grant application provided by a State, local, or other non-Federal source.</P> <P>(4) Additional types of in-kind contributions the Associate Administrator deems appropriate.</P> <P>(b) Funds used for matching purposes under any other Federal grant or cooperative agreement may not be used for matching purposes. The funds expended by a recipient agency to qualify for the grant may not be used for cost-sharing purposes.</P> <P>(c) Acceptable contributions for matching and cost sharing purposes must conform to 49 CFR part 18.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59 FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.70</SECTNO> <SUBJECT>Financial administration.</SUBJECT> <P>(a) A State must expend and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost-type contractors, must be sufficient to:</P> <P>(1) Permit the preparation of reports required by 49 CFR part 18 and this part, including the tracing of funds provided for planning to a level of expenditure adequate to establish that at least 75 percent of the funds provided were made available to LEPCs for developing, improving, and implementing emergency plans; and the tracing of funds provided for training to a level of expenditure adequate to establish that <PRTPAGE P="71"/>at least 75 percent of the funds provided were made available for the purposes of training public sector employees employed or used by political subdivisions.</P> <P>(2) Permit the tracing of funds to a level of expenditure adequate to establish that such funds have not been used in violation of the restrictions and prohibitions of applicable statutes.</P> <P>(b) The financial management systems of Indian tribes and any subgrantees must meet the standards of 49 CFR 18.20, including the ability to trace funds provided for training to a level of expenditure adequate to establish that at least 75 percent of the funds provided were made available for the purposes of training public sector employees employed or used by political subdivisions.</P> <P>(c) Advances shall be made to States and Indian tribes consistent with 49 CFR part 18 and 31 CFR part 205. The Associate Administrator shall base these advances on demonstrated need, which will be determined on a case-by-case basis, considering such factors as State/Tribal budget constraints and reductions in amounts budgeted for hazardous materials activities. To obtain an advance, a State or Indian tribe must comply with the following requirements:</P> <P>(1) A letter from the Governor or Tribal leader or their designee is required specifying the extenuating circumstances requiring the funding advance for the grant;</P> <P>(2) The maximum advance request may not be more than $25,000 for each State or Indian tribe;</P> <P>(3) Recipients of advance funding must obligate those funds within 3 months of receipt;</P> <P>(4) Advances including interest will be deducted from the initial reimbursement to the State or Indian tribe; and</P> <P>(5) The State or Indian tribe will have its allocation of current grant funds reduced and will not be permitted to apply for future grant funds until the advance is covered by a request for reimbursement. For example, if $25,000 is advanced for personnel costs, this advance would be deducted from the initial reimbursement in the year the advance was made.</P> <P>(d) To be allowable, costs must be eligible, reasonable, necessary, and allocable to the approved project in accordance with OMB Circular A-87 and included in the grant award. Costs incurred prior to the award of any grant are not allowable. Recipient agencies are responsible for obtaining audits in accordance with the Single Audit Act of 1984 (31 U.S.C. 7501), 49 CFR part 90, and OMB Circular A-128. Audits shall be made by an independent auditor in accordance with generally accepted government auditing standards covering financial and compliance audits. The Associate Administrator may audit a recipient agency at any time.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.80</SECTNO> <SUBJECT>Procurement.</SUBJECT> <P>Project managers shall use procurement procedures and practices which reflect applicable State laws and regulations and Federal requirements as specified in 49 CFR 18.36.</P> </SECTION> <SECTION> <SECTNO>§ 110.90</SECTNO> <SUBJECT>Grant monitoring, reports, and records retention.</SUBJECT> <P>(a) <E T="03">Grant monitoring.</E> Project managers are responsible for managing the day-to-day operations of grant, subgrant and contract-supported activities. Project managers must monitor performance of supported activities to assure compliance with applicable Federal requirements and achievement of performance goals. Monitoring must cover each program, function, activity, or task covered by the grant. Monitoring and reporting requirements for planning and training are contained in this part; general grant reporting requirements are specified in 49 CFR 18.40.</P> <P>(b) <E T="03">Reports.</E> (1) The project manager shall submit a performance report at the completion of an activity for which reimbursement is being requested or with a request to amend the grant. The final performance report is due 90 days after the expiration or termination of the grant.</P> <P>(2) Project managers shall submit an original and two copies of all performance reports. Performance reports for planning and training must include comparison of actual accomplishments <PRTPAGE P="72"/>to the stated goals and objectives established for the performance period, and the reasons for not achieving those goals and objectives, if applicable.</P> <P>(3) Project managers shall report developments or events that occur between the required performance reporting dates which have significant impact upon the planning and training activity such as:</P> <P>(i) Problems, delays, or adverse conditions which will impair the ability to meet the objective of the grant; and</P> <P>(ii) Favorable developments which enable meeting time schedules and objectives sooner or at less cost than anticipated or producing more beneficial results than originally planned.</P> <P>(4) Financial reporting, except as provided in § 110.70 and 49 CFR 18.41, shall be supplied quarterly using Standard Form 270, Request for Advance or Reimbursement, to report the status of funds. The project manager shall report separately on planning and training.</P> <P>(c) <E T="03">Records retention.</E> In accordance with 49 CFR 18.42, all financial and programmatic records, supporting documents, statistical records, training materials, and other documents generated under a grant shall be maintained by the project manager for three years from the date the project manager submits the final financial status report (SF 269) or Request for Advance or Reimbursement (SF 270). The project manager shall designate a repository and single-point of contact for planning and for training, or both, for these purposes. If any litigation, claim, negotiation, audit or other action involving the records has been started before the expiration of the 3-year period, the records must be retained until completion of the action and resolution of all issues which arise from it, or until the end of the regular 3-year period, whichever is later.</P> </SECTION> <SECTION> <SECTNO>§ 110.100</SECTNO> <SUBJECT>Enforcement.</SUBJECT> <P>If a recipient agency fails to comply with any term of an award (whether stated in a Federal statute or regulation, an assurance, a State plan or application, a notice of award, or elsewhere) a noncompliance action may be taken as specified in 40 CFR 18.43. The recipient agency may appeal any such actions as specified in 49 CFR part 18. Costs incurred by the recipient agency during a suspension or after termination of an award are not allowable unless the Associate Administrator authorizes it in writing. Grant awards may be terminated in whole or in part with the consent of the recipient at any agreed upon effective date, or by the recipient upon written notification.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.110</SECTNO> <SUBJECT>After-grant requirements.</SUBJECT> <P>The Associate Administrator will close out the award upon determination that all applicable administrative actions and all required work of the grant are complete in accordance with subpart D of 49 CFR part 18. The project manager must submit all financial, performance, and other reports required as a condition of the grant, within 90 days after the expiration or termination of the grant. This time frame may be extended by the Associate Administrator for Hazardous Materials Safety for cause.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by 66 FR 45377, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.120</SECTNO> <SUBJECT>Deviation from this part.</SUBJECT> <P>Recipient agencies may request a deviation from the non-statutory provisions of this part. The Associate Administrator will respond to such requests in writing. If appropriate, the decision will be included in the grant agreement. Request for deviations from part 110 must be submitted to: Grants Manager, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <CITA>[Amdt. 110-1, 57 FR 43067, Sept. 17, 1992, as amended by Amdt. 110-3, 59 FR 49132, Sept. 26, 1994; 66 FR 45377, Aug. 28, 2001; 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 110.130</SECTNO> <SUBJECT>Disputes.</SUBJECT> <P>Disputes should be resolved at the lowest level possible, beginning with the project manager and the project officer. If an agreement cannot be reached, the Administrator, PHMSA, will serve as the dispute resolution official, whose decision will be final.</P> </SECTION> </PART> </SUBCHAP> <SUBCHAP TYPE="P"> <PRTPAGE P="73"/> <HD SOURCE="HED">SUBCHAPTER B—OIL TRANSPORTATION</HD> <PART> <EAR>Pt. 130</EAR> <HD SOURCE="HED">PART 130—OIL SPILL PREVENTION AND RESPONSE PLANS</HD> <CONTENTS> <SECHD>Sec.</SECHD> <SECTNO>130.1</SECTNO> <SUBJECT>Purpose.</SUBJECT> <SECTNO>130.2</SECTNO> <SUBJECT>Scope.</SUBJECT> <SECTNO>130.3</SECTNO> <SUBJECT>General requirements.</SUBJECT> <SECTNO>130.5</SECTNO> <SUBJECT>Definitions.</SUBJECT> <SECTNO>130.11</SECTNO> <SUBJECT>Communication requirements.</SUBJECT> <SECTNO>130.21</SECTNO> <SUBJECT>Packaging requirements.</SUBJECT> <SECTNO>130.31</SECTNO> <SUBJECT>Response plans.</SUBJECT> <SECTNO>130.33</SECTNO> <SUBJECT>Response plan implementation.</SUBJECT> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>33 U.S.C. 1321.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. 130-2, 61 FR 30541, June 17, 1996, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 130.1</SECTNO> <SUBJECT>Purpose.</SUBJECT> <P>This part prescribes prevention, containment and response planning requirements of the Department of Transportation applicable to transportation of oil by motor vehicles and rolling stock.</P> </SECTION> <SECTION> <SECTNO>§ 130.2</SECTNO> <SUBJECT>Scope.</SUBJECT> <P>(a) The requirements of this part apply to—</P> <P>(1) Any liquid petroleum oil in a packaging having a capacity of 3,500 gallons or more; and</P> <P>(2) Any liquid petroleum or non-petroleum oil in a quantity greater than 42,000 gallons per packaging.</P> <P>(b) The requirements of this part have no effect on—</P> <P>(1) The applicability of the Hazardous Materials Regulations set forth in subchapter C of this chapter; and</P> <P>(2) The discharge notification requirements of the United States Coast Guard (33 CFR part 153) and EPA (40 CFR part 110).</P> <P>(c) The requirements of this part do not apply to—</P> <P>(1) Any mixture or solution in which oil is in a concentration by weight of less than 10 percent.</P> <P>(2) Transportation of oil by aircraft or vessel.</P> <P>(3) Any petroleum oil carried in a fuel tank for the purpose of supplying fuel for propulsion of the transport vehicle to which it is attached.</P> <P>(4) Oil transport exclusively within the confines of a non-transportation-related or terminal facility in a vehicle not intended for use in interstate or intrastate commerce (see 40 CFR part 112, appendix A).</P> <P>(d) The requirements in § 130.31(b) of this part do not apply to mobile marine transportation-related facilities (see 33 CFR part 154).</P> </SECTION> <SECTION> <SECTNO>§ 130.3</SECTNO> <SUBJECT>General requirements.</SUBJECT> <P>No person may offer or accept for transportation or transport oil subject to this part unless that person—</P> <P>(a) Complies with this part; and</P> <P>(b) Has been instructed on the applicable requirements of this part.</P> </SECTION> <SECTION> <SECTNO>§ 130.5</SECTNO> <SUBJECT>Definitions.</SUBJECT> <P>In this subchapter: <E T="03">Animal fat</E> means a non-petroleum oil, fat, or grease derived from animals, not specifically identified elsewhere in this part.</P> <P> <E T="03">Contract or other means</E> is:</P> <P>(1) A written contract with a response contractor identifying and ensuring the availability of the necessary personnel or equipment within the shortest practicable time;</P> <P>(2) A written certification by the owner or operator that the necessary personnel or equipment can and will be made available by the owner or operator within the shortest practicable time; or</P> <P>(3) Documentation of membership in an oil spill response organization that ensures the owner's or operator's access to the necessary personnel or equipment within the shortest practicable time.</P> <P> <E T="03">EPA</E> means the U.S. Environmental Protection Agency.</P> <P> <E T="03">Liquid</E> means a material that has a vertical flow of over two inches (50 mm) within a three-minute period, or a material having one gram or more liquid separation, when determined in accordance with the procedures specified in ASTM D 4359-84, “Standard Test Method for Determining Whether a Material is a Liquid or a Solid,” 1990 edition, which is incorporated by reference. </P> <NOTE> <HD SOURCE="HED">Note:</HD> <P>This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained <PRTPAGE P="74"/>from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103. Copies may be inspected at the Office of Hazardous Materials Safety, Office of Hazardous Materials Standards, Room 8422, DOT headquarters building, 400 7th St., SW, Washington, DC 20590, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: <E T="03">http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.</E> </P> </NOTE> <P> <E T="03">Maximum extent practicable</E> means the limits of available technology and the practical and technical limits on an owner or operator of an onshore facility in planning the response resources required to provide the on-water recovery capability and the shoreline protection and cleanup capability to conduct response activities for a worst-case discharge of oil in adverse weather.</P> <P> <E T="03">Non-petroleum oil</E> means any animal fat, vegetable oil or other non-petroleum oil.</P> <P> <E T="03">Oil</E> means oil of any kind or in any form, including, but not limited to, petroleum, fuel oil, sludge, oil refuse, and oil mixed with wastes other than dredged spoil. </P> <NOTE> <HD SOURCE="HED">Note:</HD> <P>This definition does not include hazardous substances (see 40 CFR part 116).</P> </NOTE> <P> <E T="03">Other non-petroleum oil</E> means a non-petroleum oil of any kind that is not an animal fat or vegetable oil.</P> <P> <E T="03">Packaging</E> means a receptacle and any other components or materials necessary for the receptacle to perform its containment function in conformance with the packaging requirements of this part. A compartmented tank is a single packaging.</P> <P> <E T="03">Person</E> means an individual, firm, corporation, partnership, association, State, municipality, commission, or political subdivision of a State, or any interstate body, as well as a department, agency, or instrumentality of the executive, legislative or judicial branch of the Federal Government.</P> <P> <E T="03">Petroleum oil</E> means any oil extracted or derived from geological hydrocarbon deposits, including fractions thereof.</P> <P> <E T="03">Qualified individual</E> means an individual familiar with the response plan, trained in his or her responsibilities in implementing the plan, and authorized, on behalf of the owner or operator, to initiate all response activities identified in the plan, to enter into response-related contracts and obligate funds for such contracts, and to act as a liaison with the on-scene coordinator and other responsible officials. The qualified individual must be available at all times the owner or operator is engaged in transportation subject to part 130 (alone or in conjunction with an equally qualified alternate), must be fluent in English, and must have in his or her possession documentation of the required authority.</P> <P> <E T="03">Transports or Transportation</E> means any movement of oil by highway or rail, and any loading, unloading, or storage incidental thereto.</P> <P> <E T="03">Vegetable oil</E> means a non-petroleum oil or fat derived from plant seeds, nuts, kernels or fruits, not specifically identified elsewhere in this part.</P> <P> <E T="03">Worst-case discharge</E> means “the largest foreseeable discharge in adverse weather conditions,” as defined at 33 U.S.C. 1321(a)(24). The largest foreseeable discharge from a motor vehicle or rail car is the capacity of the cargo container. The term “maximum potential discharge,” used in § 130.31(a), is synonymous with “worst-case discharge.”</P> <CITA>[Amdt. 130-2, 61 FR 30541, June 17, 1996, as amended by 66 FR 45378, Aug. 28, 2001; 67 FR 61011, Sept. 27, 2002; 69 FR 18803, Apr. 9, 2004]</CITA> </SECTION> <SECTION> <SECTNO>§ 130.11</SECTNO> <SUBJECT>Communication requirements.</SUBJECT> <P>(a) No person may offer oil subject to this part for transportation unless that person provides the person accepting the oil for transportation a document indicating the shipment contains oil.</P> <P>(b) No person may transport oil subject to this part unless a readily available document indicating that the shipment contains oil is in the possession of the transport vehicle operator during transportation.</P> <P>(c) A material subject to the requirements of this part need not be specifically identified as oil when the shipment document accurately describes the material as: aviation fuel, diesel fuel, fuel oil, gasoline, jet fuel, kerosene, motor fuel, or petroleum.</P> </SECTION> <SECTION> <SECTNO>§ 130.21</SECTNO> <SUBJECT>Packaging requirements.</SUBJECT> <P>Each packaging used for the transportation of oil subject to this part <PRTPAGE P="75"/>must be designed, constructed, maintained, closed, and loaded so that, under conditions normally incident to transportation, there will be no release of oil to the environment.</P> </SECTION> <SECTION> <SECTNO>§ 130.31</SECTNO> <SUBJECT>Response plans.</SUBJECT> <P>(a) After September 30, 1993, no person may transport oil subject to this part unless that person has a current basic written plan that:</P> <P>(1) Sets forth the manner of response to discharges that may occur during transportation;</P> <P>(2) Takes into account the maximum potential discharge of the contents from the packaging;</P> <P>(3) Identifies private personnel and equipment available to respond to a discharge;</P> <P>(4) Identifies the appropriate persons and agencies (including their telephone numbers) to be contacted in regard to such a discharge and its handling, including the National Response Center; and</P> <P>(5) For each motor carrier, is retained on file at that person's principal place of business and at each location where dispatching of motor vehicles occurs; and for each railroad, is retained on file at that person's principal place of business and at the dispatcher's office.</P> <P>(b) After February 18, 1993, no person may transport an oil subject to this part in a quantity greater than 1,000 barrels (42,000 gallons) unless that person has a current comprehensive written plan that:</P> <P>(1) Conforms with all requirements specified in paragraph (a) of this section;</P> <P>(2) Is consistent with the requirements of the National Contingency Plan (40 CFR part 300) and Area Contingency Plans;</P> <P>(3) Identifies the qualified individual having full authority to implement removal actions, and requires immediate communications between that individual and the appropriate Federal official and the persons providing spill response personnel and equipment;</P> <P>(4) Identifies, and ensures by contract or other means the availability of, private personnel (including address and phone number), and the equipment necessary to remove, to the maximum extent practicable, a worst case discharge (including a discharge resulting from fire or explosion) and to mitigate or prevent a substantial threat of such a discharge;</P> <P>(5) Describes the training, equipment testing, periodic unannounced drills, and response actions of facility personnel, to be carried out under the plan to ensure the safety of the facility and to mitigate or prevent the discharge, or the substantial threat of such a discharge; and</P> <P>(6) Is submitted, and resubmitted in the event of any significant change, to the Federal Railroad Administrator (for tank cars), or to the Federal Highway Administrator (for cargo tanks) at East Building, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001.</P> <APPRO>(Approved by the Office of Management and Budget under control number 2137-0591)</APPRO> <CITA>[Amdt. 130-2, 61 FR 30541, June 17, 1996, as amended at 72 FR 55683, Oct. 1, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 130.33</SECTNO> <SUBJECT>Response plan implementation.</SUBJECT> <P>If, during transportation of oil subject to this part, a discharge occurs—into or on the navigable waters of the United States; on the adjoining shorelines to the navigable waters; or that may affect natural resources belonging to, appertaining to, or under the exclusive management authority of, the United States—the person transporting the oil shall implement the plan required by § 130.31, in a manner consistent with the National Contingency Plan, 40 CFR part 300, or as otherwise directed by the Federal on-scene coordinator.</P> </SECTION> </PART> </SUBCHAP> <SUBCHAP TYPE="P"> <PRTPAGE P="76"/> <HD SOURCE="HED">SUBCHAPTER C—HAZARDOUS MATERIALS REGULATIONS</HD> <PART> <EAR>Pt. 171</EAR> <HD SOURCE="HED">PART 171—GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS</HD> <CONTENTS> <SECHD>Sec.</SECHD> <SUBPART> <HD SOURCE="HED">Subpart A—Applicability, General Requirements, and North American Shipments</HD> <SECTNO>171.1</SECTNO> <SUBJECT>Applicability of Hazardous Materials Regulations (HMR) to persons and functions.</SUBJECT> <SECTNO>171.2</SECTNO> <SUBJECT>General requirements.</SUBJECT> <SECTNO>171.3</SECTNO> <SUBJECT>Hazardous waste.</SUBJECT> <SECTNO>171.4</SECTNO> <SUBJECT>Marine pollutants.</SUBJECT> <SECTNO>171.6</SECTNO> <SUBJECT>Control numbers under the Paperwork Reduction Act.</SUBJECT> <SECTNO>171.7</SECTNO> <SUBJECT>Reference material.</SUBJECT> <SECTNO>171.8</SECTNO> <SUBJECT>Definitions and abbreviations.</SUBJECT> <SECTNO>171.9</SECTNO> <SUBJECT>Rules of construction.</SUBJECT> <SECTNO>171.10</SECTNO> <SUBJECT>Units of measure.</SUBJECT> <SECTNO>171.11</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>171.12</SECTNO> <SUBJECT>North American Shipments.</SUBJECT> <SECTNO>171.12a</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>171.14</SECTNO> <SUBJECT>Transitional provisions for implementing certain requirements.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Incident Reporting, Notification, BOE Approvals and Authorization</HD> <SECTNO>171.15</SECTNO> <SUBJECT>Immediate notice of certain hazardous materials incidents.</SUBJECT> <SECTNO>171.16</SECTNO> <SUBJECT>Detailed hazardous materials incident reports.</SUBJECT> <SECTNO>171.17-171.18</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>171.19</SECTNO> <SUBJECT>Approvals or authorizations issued by the Bureau of Explosives.</SUBJECT> <SECTNO>171.20</SECTNO> <SUBJECT>Submission of Examination Reports.</SUBJECT> <SECTNO>171.21</SECTNO> <SUBJECT>Assistance in investigations and special studies.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Authorization and Requirements for the Use of International Transport Standards and Regulations</HD> <SECTNO>171.22</SECTNO> <SUBJECT>Authorization and conditions for the use of international standards and regulations.</SUBJECT> <SECTNO>171.23</SECTNO> <SUBJECT>Requirements for specific materials and packagings transported under the ICAO Technical Instructions, IMDG Code, Transport Canada TDG Regulations, or the IAEA Regulations.</SUBJECT> <SECTNO>171.24</SECTNO> <SUBJECT>Additional requirements for the use of the ICAO Technical Instructions.</SUBJECT> <SECTNO>171.25</SECTNO> <SUBJECT>Additional requirements for the use of the IMDG Code.</SUBJECT> <SECTNO>171.26</SECTNO> <SUBJECT>Additional requirements for the use of the IAEA Regulations.</SUBJECT> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>49 U.S.C. 5101-5128, 44701; 49 CFR 1.45 and 1.53; Pub. L. 101-410 section 4 (28 U.S.C. 2461 note); Pub. L. 104-134 section 31001.</P> </AUTH> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>Nomenclature changes to part 171 appear at 70 FR 56090, Sept. 23, 2005.</P> </EDNOTE> <SUBPART> <HD SOURCE="HED">Subpart A—Applicability, General Requirements, and North American Shipments</HD> <SECTION> <SECTNO>§ 171.1</SECTNO> <SUBJECT>Applicability of Hazardous Materials Regulations (HMR) to persons and functions.</SUBJECT> <P>Federal hazardous materials transportation law (49 U.S.C. 5101 <E T="03">et seq.</E>) directs the Secretary of Transportation to establish regulations for the safe and secure transportation of hazardous materials in commerce, as the Secretary considers appropriate. The Secretary is authorized to apply these regulations to persons who transport hazardous materials in commerce. In addition, the law authorizes the Secretary to apply these regulations to persons who cause hazardous materials to be transported in commerce. The law also authorizes the Secretary to apply these regulations to persons who manufacture or maintain a packaging or a component of a packaging that is represented, marked, certified, or sold as qualified for use in the transportation of a hazardous material in commerce. Federal hazardous material transportation law also applies to anyone who indicates by marking or other means that a hazardous material being transported in commerce is present in a package or transport conveyance when it is not, and to anyone who tampers with a package or transport conveyance used to transport hazardous materials in commerce or a required marking, label, placard, or shipping description. Regulations prescribed in accordance with Federal hazardous materials transportation law shall govern safety aspects, including security, of the transportation of hazardous materials that the Secretary considers appropriate. In 49 CFR 1.53, the Secretary delegated authority to issue regulations for the safe and secure transportation of hazardous materials in commerce to the Pipeline and Hazardous <PRTPAGE P="77"/>Materials Safety Administrator. The Administrator issues the Hazardous Materials Regulations (HMR; 49 CFR Parts 171 through 180) under that delegated authority. This section addresses the applicability of the HMR to packagings represented as qualified for use in the transportation of hazardous materials in commerce and to pre-transportation and transportation functions.</P> <P>(a) <E T="03">Packagings.</E> Requirements in the HMR apply to each person who manufactures, fabricates, marks, maintains, reconditions, repairs, or tests a packaging or a component of a packaging that is represented, marked, certified, or sold as qualified for use in the transportation of a hazardous material in commerce, including each person under contract with any department, agency, or instrumentality of the executive, legislative, or judicial branch of the Federal government who manufactures, fabricates, marks, maintains, reconditions, repairs, or tests a packaging or a component of a packaging that is represented, marked, certified, or sold as qualified for use in the transportation of a hazardous material in commerce.</P> <P>(b) <E T="03">Pre-transportation functions.</E> Requirements in the HMR apply to each person who offers a hazardous material for transportation in commerce, causes a hazardous material to be transported in commerce, or transports a hazardous material in commerce and who performs or is responsible for performing a pre-transportation function, including each person performing pre-transportation functions under contract with any department, agency, or instrumentality of the executive, legislative, or judicial branch of the Federal government. Pre-transportation functions include, but are not limited to, the following:</P> <P>(1) Determining the hazard class of a hazardous material.</P> <P>(2) Selecting a hazardous materials packaging.</P> <P>(3) Filling a hazardous materials packaging, including a bulk packaging.</P> <P>(4) Securing a closure on a filled or partially filled hazardous materials package or container or on a package or container containing a residue of a hazardous material.</P> <P>(5) Marking a package to indicate that it contains a hazardous material.</P> <P>(6) Labeling a package to indicate that it contains a hazardous material.</P> <P>(7) Preparing a shipping paper.</P> <P>(8) Providing and maintaining emergency response information.</P> <P>(9) Reviewing a shipping paper to verify compliance with the HMR or international equivalents.</P> <P>(10) For each person importing a hazardous material into the United States, providing the shipper with timely and complete information as to the HMR requirements that will apply to the transportation of the material within the United States.</P> <P>(11) Certifying that a hazardous material is in proper condition for transportation in conformance with the requirements of the HMR.</P> <P>(12) Loading, blocking, and bracing a hazardous materials package in a freight container or transport vehicle.</P> <P>(13) Segregating a hazardous materials package in a freight container or transport vehicle from incompatible cargo.</P> <P>(14) Selecting, providing, or affixing placards for a freight container or transport vehicle to indicate that it contains a hazardous material.</P> <P>(c) <E T="03">Transportation functions.</E> Requirements in the HMR apply to transportation of a hazardous material in commerce and to each person who transports a hazardous material in commerce, including each person under contract with any department, agency, or instrumentality of the executive, legislative, or judicial branch of the Federal government who transports a hazardous material in commerce. Transportation of a hazardous material in commerce begins when a carrier takes physical possession of the hazardous material for the purpose of transporting it and continues until the package containing the hazardous material is delivered to the destination indicated on a shipping document, package marking, or other medium, or, in the case of a rail car, until the car is delivered to a private track or siding. For a private motor carrier, transportation of a hazardous material in commerce begins when a motor vehicle driver takes possession of a hazardous <PRTPAGE P="78"/>material for the purpose of transporting it and continues until the driver relinquishes possession of the package containing the hazardous material at its destination and is no longer responsible for performing functions subject to the HMR with respect to that particular package. Transportation of a hazardous material in commerce includes the following:</P> <P>(1) <E T="03">Movement.</E> Movement of a hazardous material by rail car, aircraft, motor vehicle, or vessel (except as delegated by Department of Homeland Security Delegation No. 0170 at 2(103)).</P> <P>(2) <E T="03">Loading incidental to movement of a hazardous material.</E> Loading of packaged or containerized hazardous material onto a transport vehicle, aircraft, or vessel for the purpose of transporting it, including blocking and bracing a hazardous materials package in a freight container or transport vehicle, and segregating a hazardous materials package in a freight container or transport vehicle from incompatible cargo, when performed by carrier personnel or in the presence of carrier personnel. For a bulk packaging, loading incidental to movement is filling the packaging with a hazardous material for the purpose of transporting it when performed by carrier personnel or in the presence of carrier personnel (except as delegated by Department of Homeland Security Delegation No. 0170 at 2(103)), including transloading.</P> <P>(3) <E T="03">Unloading incidental to movement of a hazardous material.</E> Removing a package or containerized hazardous material from a transport vehicle, aircraft, or vessel; or for a bulk packaging, emptying a hazardous material from the bulk packaging after the hazardous material has been delivered to the consignee when performed by carrier personnel or in the presence of carrier personnel or, in the case of a private motor carrier, while the driver of the motor vehicle from which the hazardous material is being unloaded immediately after movement is completed is present during the unloading operation. (Emptying a hazardous material from a bulk packaging while the packaging is on board a vessel is subject to separate regulations as delegated by Department of Homeland Security Delegation No. 0170 at 2(103).) Unloading incidental to movement includes transloading.</P> <P>(4) <E T="03">Storage incidental to movement of a hazardous material.</E> Storage of a transport vehicle, freight container, or package containing a hazardous material by any person between the time that a carrier takes physical possession of the hazardous material for the purpose of transporting it until the package containing the hazardous material has been delivered to the destination indicated on a shipping document, package marking, or other medium, or, in the case of a private motor carrier, between the time that a motor vehicle driver takes physical possession of the hazardous material for the purpose of transporting it until the driver relinquishes possession of the package at its destination and is no longer responsible for performing functions subject to the HMR with respect to that particular package.</P> <P>(i) Storage incidental to movement includes—</P> <P>(A) Storage at the destination shown on a shipping document, including storage at a transloading facility, provided the original shipping documentation identifies the shipment as a through-shipment and identifies the final destination or destinations of the hazardous material; and</P> <P>(B) A rail car containing a hazardous material that is stored on track that does not meet the definition of “private track or siding” in § 171.8, even if the car has been delivered to the destination shown on the shipping document.</P> <P>(ii) Storage incidental to movement does not include storage of a hazardous material at its final destination as shown on a shipping document.</P> <P>(d) <E T="03">Functions not subject to the requirements of the HMR.</E> The following are examples of activities to which the HMR do not apply:</P> <P>(1) Storage of a freight container, transport vehicle, or package containing a hazardous material at an offeror facility prior to a carrier taking possession of the hazardous material for movement in transportation in commerce or, for a private motor carrier, prior to a motor vehicle driver <PRTPAGE P="79"/>taking physical possession of the hazardous material for movement in transportation in commerce.</P> <P>(2) Unloading of a hazardous material from a transport vehicle or a bulk packaging performed by a person employed by or working under contract to the consignee following delivery of the hazardous material by the carrier to its destination and departure from the consignee's premises of the carrier's personnel or, in the case of a private carrier, departure of the driver from the unloading area.</P> <P>(3) Storage of a freight container, transport vehicle, or package containing a hazardous material after its delivery by a carrier to the destination indicated on a shipping document, package marking, or other medium, or, in the case of a rail car, storage of a rail car on private track.</P> <P>(4) Rail and motor vehicle movements of a hazardous material exclusively within a contiguous facility boundary where public access is restricted, except to the extent that the movement is on or crosses a public road or is on track that is part of the general railroad system of transportation, unless access to the public road is restricted by signals, lights, gates, or similar controls.</P> <P>(5) Transportation of a hazardous material in a motor vehicle, aircraft, or vessel operated by a Federal, state, or local government employee solely for noncommercial Federal, state, or local government purposes.</P> <P>(6) Transportation of a hazardous material by an individual for non-commercial purposes in a private motor vehicle, including a leased or rented motor vehicle.</P> <P>(7) Any matter subject to the postal laws and regulations of the United States.</P> <P>(e) <E T="03">Requirements of other Federal agencies.</E> Each facility at which pre-transportation or transportation functions are performed in accordance with the HMR may be subject to applicable standards and regulations of other Federal agencies.</P> <P>(f) <E T="03">Requirements of state and local government agencies.</E> (1) Under 49 U.S.C. 5125, a requirement of a state, political subdivision of a state, or an Indian tribe is preempted, unless otherwise authorized by another Federal statute or DOT issues a waiver of preemption, if—</P> <P>(i) Complying with both the non-Federal requirement and Federal hazardous materials transportation law, the regulations issued under Federal hazardous material transportation law or a hazardous material transportation security regulation or directive issued by the Secretary of Homeland Security is not possible;</P> <P>(ii) The non-Federal requirement, as applied or enforced, is an obstacle to accomplishing and carrying out Federal hazardous materials transportation law, the regulations issued under Federal hazardous material transportation law, or a hazardous material transportation security regulation or directive issued by the Secretary of Homeland Security;</P> <P>(iii) The non-Federal requirement is not substantively the same as a provision of Federal hazardous materials transportation law, the regulations issued under Federal hazardous material transportation law, or a hazardous material transportation security regulation or directive issued by the Secretary of Homeland Security with respect to—</P> <P>(A) The designation, description, and classification of hazardous material;</P> <P>(B) The packing, repacking, handling, labeling, marking, and placarding of hazardous material;</P> <P>(C) The preparation, execution, and use of shipping documents related to hazardous material and requirements related to the number, contents, and placement of those documents;</P> <P>(D) The written notification, recording, and reporting of the unintentional release of hazardous material; or</P> <P>(E) The design, manufacturing, fabricating, marking, maintenance, reconditioning, repairing, or testing of a package or container represented, marked, certified, or sold as qualified for use in transporting hazardous material.</P> <P>(iv) A non-Federal designation, limitation or requirement on highway routes over which hazardous material may or may not be transported does not comply with the regulations in subparts C and D of part 397 of this title; or<PRTPAGE P="80"/> </P> <P>(v) A fee related to the transportation of a hazardous material is not fair or is used for a purpose that is not related to transporting hazardous material, including enforcement and planning, developing, and maintaining a capability for emergency response.</P> <P>(2) Subject to the limitations in paragraph (f)(1) of this section, each facility at which functions regulated under the HMR are performed may be subject to applicable laws and regulations of state and local governments and Indian tribes.</P> <P>(3) The procedures for DOT to make administrative determinations of preemption are set forth in subpart E of part 397 of this title with respect to non-Federal requirements on highway routing (paragraph (f)(1)(iv) of this section) and in subpart C of part 107 of this chapter with respect to all other non-Federal requirements.</P> <P>(g) <E T="03">Penalties for noncompliance.</E> Each person who knowingly violates a requirement of the Federal hazardous material transportation law, an order issued under Federal hazardous material transportation law, subchapter A of this chapter, or a special permit or approval issued under subchapter A or C of this chapter is liable for a civil penalty of not more than $55,000 and not less than $250 for each violation, except the maximum civil penalty is $110,000 if the violation results in death, serious illness or severe injury to any person or substantial destruction of property, and a minimum $495 civil penalty applies to a violation relating to training. When a violation is a continuing one and involves transporting of hazardous material or causing them to be transported, each day of the violation is a separate offense. Each person who knowingly violates § 171.2(l) or willfully or recklessly violates a provision of the Federal hazardous material transportation law, an order issued under Federal hazardous material transportation law, subchapter A of this chapter, or a special permit or approval issued under subchapter A or C of this chapter, shall be fined under title 18, United States Code, or imprisoned for not more than 5 years, or both, except the maximum amount of imprisonment shall be 10 years in any case in which a violation involves the release of a hazardous material which results in death or bodily injury to any person.</P> <CITA>[68 FR 61937, Oct. 30, 2003; 70 FR 20031, Apr. 15, 2005, as amended at 70 FR 73162, Dec. 9, 2005; 71 FR 8488, Feb. 17, 2006; 71 FR 44931, Aug. 8, 2006; 74 FR 68702, Dec. 29, 2009; 75 FR 53596, Sept. 1, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.2</SECTNO> <SUBJECT>General requirements.</SUBJECT> <P>(a) Each person who performs a function covered by this subchapter must perform that function in accordance with this subchapter.</P> <P>(b) Each person who offers a hazardous material for transportation in commerce must comply with all applicable requirements of this subchapter, or an exemption or special permit, approval, or registration issued under this subchapter or under subchapter A of this chapter. There may be more than one offeror of a shipment of hazardous materials. Each offeror is responsible for complying with the requirements of this subchapter, or an exemption or special permit, approval, or registration issued under this subchapter or subchapter A of this chapter, with respect to any pre-transportation function that it performs or is required to perform; however, each offeror is responsible only for the specific pre-transportation functions that it performs or is required to perform, and each offeror may rely on information provided by another offeror, unless that offeror knows or, a reasonable person, acting in the circumstances and exercising reasonable care, would have knowledge that the information provided by the other offeror is incorrect.</P> <P>(c) Each person who performs a function covered by or having an effect on a specification or activity prescribed in part 178, 179, or 180 of this subchapter, an approval issued under this subchapter, or an exemption or special permit issued under subchapter A of this chapter, must perform the function in accordance with that specification, approval, an exemption or special permit, as appropriate.</P> <P>(d) No person may offer or accept a hazardous material for transportation in commerce or transport a hazardous material in commerce unless that person is registered in conformance with <PRTPAGE P="81"/>subpart G of part 107 of this chapter, if applicable.</P> <P>(e) No person may offer or accept a hazardous material for transportation in commerce unless the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by applicable requirements of this subchapter or an exemption or special permit, approval, or registration issued under this subchapter or subchapter A of this chapter.</P> <P>(f) No person may transport a hazardous material in commerce unless the hazardous material is transported in accordance with applicable requirements of this subchapter, or an exemption or special permit, approval, or registration issued under this subchapter or subchapter A of this chapter. Each carrier who transports a hazardous material in commerce may rely on information provided by the offeror of the hazardous material or a prior carrier, unless the carrier knows or, a reasonable person, acting in the circumstances and exercising reasonable care, would have knowledge that the information provided by the offeror or prior carrier is incorrect.</P> <P>(g) No person may represent, mark, certify, sell, or offer a packaging or container as meeting the requirements of this subchapter governing its use in the transportation of a hazardous material in commerce unless the packaging or container is manufactured, fabricated, marked, maintained, reconditioned, repaired, and retested in accordance with the applicable requirements of this subchapter. No person may represent, mark, certify, sell, or offer a packaging or container as meeting the requirements of an exemption, a special permit, approval, or registration issued under this subchapter or subchapter A of this chapter unless the packaging or container is manufactured, fabricated, marked, maintained, reconditioned, repaired, and retested in accordance with the applicable requirements of the exemption, special permit, approval, or registration issued under this subchapter or subchapter A of this chapter. The requirements of this paragraph apply whether or not the packaging or container is used or to be used for the transportation of a hazardous material.</P> <P>(h) The representations, markings, and certifications subject to the prohibitions of paragraph (g) of this section include:</P> <P>(1) Specification identifications that include the letters “ICC”, “DOT”, “CTC”, “MC”, or “UN”;</P> <P>(2) Exemption, special permit, approval, and registration numbers that include the letters “DOT”, “EX”, “M”, or “R”; and</P> <P>(3) Test dates associated with specification, registration, approval, retest, exemption, or special permit markings indicating compliance with a test or retest requirement of the HMR, or an exemption, special permit, approval, or registration issued under the HMR or under subchapter A of this chapter.</P> <P>(i) No person may certify that a hazardous material is offered for transportation in commerce in accordance with the requirements of this subchapter unless the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by applicable requirements of this subchapter or an exemption or special permit, approval, or registration issued under this subchapter or subchapter A of this chapter. Each person who offers a package containing a hazardous material for transportation in commerce in accordance with the requirements of this subchapter or an exemption or special permit, approval, or registration issued under this subchapter or subchapter A of this chapter, must assure that the package remains in condition for shipment until it is in the possession of the carrier.</P> <P>(j) No person may, by marking or otherwise, represent that a container or package for transportation of a hazardous material is safe, certified, or in compliance with the requirements of this chapter unless it meets the requirements of all applicable regulations issued under Federal hazardous material transportation law.</P> <P>(k) No person may, by marking or otherwise, represent that a hazardous material is present in a package, container, motor vehicle, rail car, aircraft, or vessel if the hazardous material is not present.<PRTPAGE P="82"/> </P> <P>(l) No person may alter, remove, deface, destroy, or otherwise unlawfully tamper with any marking, label, placard, or description on a document required by Federal hazardous material transportation law or the regulations issued under Federal hazardous material transportation law. No person may alter, deface, destroy, or otherwise unlawfully tamper with a package, container, motor vehicle, rail car, aircraft, or vessel used for the transportation of hazardous materials.</P> <P>(m) No person may falsify or alter an exemption or special permit, approval, registration, or other grant of authority issued under this subchapter or subchapter A of this chapter. No person may offer a hazardous material for transportation or transport a hazardous material in commerce under an exemption or special permit, approval, registration or other grant of authority issued under this subchapter or subchapter A of this chapter if such grant of authority has been altered without the consent of the issuing authority. No person may represent, mark, certify, or sell a packaging or container under an exemption or special permit, approval, registration or other grant of authority issued under this subchapter or subchapter A of this chapter if such grant of authority has been altered without the consent of the issuing authority.</P> <CITA>[68 FR 61937, Oct. 30, 2003, as amended at 70 FR 43643, July 28, 2005; 70 FR 73162, Dec. 9, 2005]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.3</SECTNO> <SUBJECT>Hazardous waste.</SUBJECT> <P>(a) No person may offer for transportation or transport a hazardous waste (as defined in § 171.8 of this subchapter) in interstate or intrastate commerce except in accordance with the requirements of this subchapter.</P> <P>(b) No person may accept for transportation, transport, or deliver a hazardous waste for which a manifest is required unless that person:</P> <P>(1) Has marked each motor vehicle used to transport hazardous waste in accordance with § 390.21 of this title even though placards may not be required;</P> <P>(2) Complies with the requirements for manifests set forth in § 172.205 of this subchapter; and</P> <P>(3) Delivers, as designated on the manifest by the generator, the entire quantity of the waste received from the generator or a transporter to:</P> <P>(i) The designated facility or, if not possible, to the designated alternate facility;</P> <P>(ii) The designated subsequent carrier; or</P> <P>(iii) A designated place outside the United States. </P> <NOTE> <HD SOURCE="HED">Note:</HD> <P>Federal law specifies penalties up to $250,000 fine for an individual and $500,000 for a company and 5 years imprisonment for the willful discharge of hazardous waste at other than designated facilities. 49 U.S.C. 5124.</P> </NOTE> <P>(c) If a discharge of hazardous waste or other hazardous material occurs during transportation, and an official of a State or local government or a Federal agency, acting within the scope of his official responsibilities, determines that immediate removal of the waste is necessary to prevent further consequence, that official may authorize the removal of the waste without the preparation of a manifest. [<E T="04">Note:</E> In such cases, EPA does not require carriers to have EPA identification numbers.] </P> <NOTE> <HD SOURCE="HED">Note 1:</HD> <P>EPA requires shippers (generators) and carriers (transporters) of hazardous wastes to have identification numbers which must be displayed on hazardous waste manifests. See 40 CFR parts 262 and 263. (Identification number application forms may be obtained from EPA regional offices.)</P> </NOTE> <NOTE> <HD SOURCE="HED">Note 2:</HD> <P>In 40 CFR part 263, the EPA sets forth requirements for the cleanup of releases of hazardous wastes.</P> </NOTE> <CITA>[Amdt. 171-53, 45 FR 34586, May 22, 1980, as amended by Amdt. 171-53, 45 FR 74648, Nov. 10, 1980; Amdt. 171-78, 49 FR 10510, Mar. 20, 1984; Amdt. 171-107, 54 FR 40068, Sept. 29, 1989; Amdt. 171-111, 55 FR 52466, Dec. 21, 1990; 56 FR 66157, Dec. 20, 1991; Amdt. 171-2, 59 FR 49132, Sept. 26, 1994; Amdt. 171-141, 61 FR 21102, May 9, 1996; 73 FR 57004, Oct. 1, 2008]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.4</SECTNO> <SUBJECT>Marine pollutants.</SUBJECT> <P>(a) Except as provided in paragraph (c) of this section, no person may offer for transportation or transport a marine pollutant, as defined in § 171.8, in intrastate or interstate commerce except in accordance with the requirements of this subchapter.<PRTPAGE P="83"/> </P> <P>(b) The requirements of this subchapter for the transportation of marine pollutants are based on the provisions of Annex III of the 1973 International Convention for Prevention of Pollution from Ships, as modified by the Protocol of 1978 (MARPOL 73/78).</P> <P>(c) <E T="03">Exceptions.</E> Except when all or part of the transportation is by vessel, the requirements of this subchapter specific to marine pollutants do not apply to non-bulk packagings transported by motor vehicle, rail car or aircraft.</P> <CITA>[Amdt. 171-116, 57 FR 52934, Nov. 5, 1993, as amended by Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 73 FR 4712, Jan. 28, 2008]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.6</SECTNO> <SUBJECT>Control numbers under the Paperwork Reduction Act.</SUBJECT> <P>(a) <E T="03">Purpose and scope.</E> This section collects and displays the control numbers assigned to the HMR collections of information by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995. This section complies with the requirements of 5 CFR 1320.7(f), 1320.12, 1320.13 and 1320.14 (OMB regulations implementing the Paperwork Reduction Act of 1995) for the display of control numbers assigned by OMB to collections of information of the HMR.</P> <P>(b) <E T="03">OMB control numbers.</E> The table in paragraph (b)(2) of this section sets forth the control numbers assigned to collection of information in the HMR by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995.</P> <P>(1) Column 1 lists the OMB control number assigned to the HMR collections of information. Column 2 contains the Report Title of the approved collection of information. Column 3 lists the part(s) or section(s) in 49 CFR identified or described in the collection of information.</P> <P>(2) Table.</P> <GPOTABLE CDEF="xs72,r100,r100" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">Current OMB<LI>control No.</LI> </CHED> <CHED H="1">Title</CHED> <CHED H="1">Title 49 CFR part or section where identified and described</CHED> </BOXHD> <ROW> <ENT I="01">2137-0014</ENT> <ENT>Cargo Tank Specification Requirements</ENT> <ENT>§§ 107.503, 107.504, 178.320, 178.337, 178.338, 178.345, 180.407, 180.409, 180.413, 180.417.</ENT> </ROW> <ROW> <ENT I="01">2137-0018</ENT> <ENT>Inspection and Testing of Portable Tanks and Intermediate Bulk Containers</ENT> <ENT>§§ 173.24, 173.32, 178.3, 178.255, 178.273, 178.274, 178.703, 178.801, 180.352, 180.605.</ENT> </ROW> <ROW> <ENT I="01">2137-0022</ENT> <ENT>Testing, Inspection, and Marking Requirements for Cylinders</ENT> <ENT>§§ 173.5b, 173.302a, 173.303, 173.304, 173.309, 178.2, 178.3, 178.35, 178.44, 178.45, 178.46, 178.57, 178.59, 178.60, 178.61, 178.68, 180.205, 180.207, 180.209, 180.211, 180.213, 180.215, 180.217, Appendix C to Part 180.</ENT> </ROW> <ROW> <ENT I="01">2137-0034</ENT> <ENT>Hazardous Materials Shipping Papers and Emergency Response Information</ENT> <ENT>§§ 172.200, 172.201, 172.202, 172.203, 172.204, 172.505, 172.600, 172.602, 172.604, 172.606, 173.6, 173.7, 173.22, 173.56, 174.24, 174.26, 174.114, 175.30, 175.31, 175.33, 176.24, 176.27, 176.30, 176.36, 176.89, 177.817.</ENT> </ROW> <ROW> <ENT I="01">2137-0039</ENT> <ENT>Hazardous Materials Incidents Reports</ENT> <ENT>§§ 171.15, 171.16, 171.21.</ENT> </ROW> <ROW> <ENT I="01">2137-0051</ENT> <ENT>Rulemaking and Special Permit Petitions</ENT> <ENT>§§ 105.30, 105.40, 106.95, 106.110, 107.105, 107.107, 107.109, 107.113, 107.117, 107.121, 107.123, 107.125, 107.205, 107.211, 107.215, 107.217, 107.219, 107.221, 107.223.</ENT> </ROW> <ROW> <ENT I="01">2137-0510</ENT> <ENT>RAM Transportation Requirements</ENT> <ENT>Part 173, Subpart I, §§ 173.22, 173.411, 173.415, 173.416, 173.417, 173.457, 173.471, 173.472, 173.473, 173.476.</ENT> </ROW> <ROW> <ENT I="01">2137-0542</ENT> <ENT>Flammable Cryogenic Liquids</ENT> <ENT>§§ 173.318, 177.816, 177.840, 180.405.</ENT> </ROW> <ROW> <PRTPAGE P="84"/> <ENT I="01">2137-0557</ENT> <ENT O="xl">Approvals for Hazardous Materials</ENT> <ENT>§§ 107.402, 107.403, 107.405, 107.502, 107.503, 107.705, 107.713, 107.715, 107.717, 107.803, 107.805, 107.807, 110.30, 172.101, 172.102, Special Provisions 19, 26, 53, 55, 60, 105, 118, 121, 125, 129, 131, 133, 136, B45, B55, B61, B69, B77, B81, N10, N72, 173.2a, 173.4, 173.7, 173.21, 173.22, 173.24, 173.31, 173.38, 173.51, 173.56, 173.58, 173.59, 173.124, 173.128, 173.159, 173.166, 173.171, 173.214, 173.222, 173.224, 173.225, 173.245, 173.301, 173.305, 173.306, 173.314, 173.315, 173.316, 173.318, 173.334, 173.340, 173.411, 173.433, 173.457, 173.471, 173.472, 173.476, 174.50, 174.63, 175.8, 175.85, 175.701, 175.703, 176.168, 176.340, 176.704, 178.3, 178.35, 178.47, 178.53, 178.273, 178.274, 178.503, 178.509, 178.605, 178.606, 178.608, 178.801, 178.813, 180.213.</ENT> </ROW> <ROW> <ENT I="01">2137-0559</ENT> <ENT>(Rail Carriers and Tank Car Tank Requirements) Requirements for Rail Tank Car Tanks—Transportation of Hazardous Materials by Rail.</ENT> <ENT>§§ 172.102, Special provisions: B45, B46, B55, B61, B69, B77, B78, B81; 173.10, 173.31, 174.20, 174.50, 174.63, 174.104, 174.114, 174.204, 179.3, 179.4, 179.5, 179.6, 179.7, 179.11, 179.18, 179.22, 179.100-9, 179.100-12, 179.100-13, 179.100-16, 179.100-17, 179.102-4, 179.102-17, 179.103-1, 179.103-2, 179.103-3, 179.103-5, 179.200-10, 179.200-14, 179.200-15, 179.200-16, 179.200-17, 179.200-19, 179.201-3, 179.201-8, 179.201-9, 179.220-4, 179.220-7, 179.220-8, 179.220-13, 179.220-15, 179.220-17, 179.220-18, 179.220-20, 179.220-22, 179.300-3, 179.300-7, 179.300-9, 179.300-12, 179.300-13, 179.300-15, 179.300-20, 179.400-3, 179.400-4, 179.400-11, 179.400-13, 179.400-16, 179.400-17, 179.400-19, 179.400-20, 179.500-5, 179.500-8, 179.500-12, 179.500-18, 180.505, 180.509, 180.515, 180.517.</ENT> </ROW> <ROW> <ENT I="01">2137-0572</ENT> <ENT>Testing requirements for non-bulk packages</ENT> <ENT>§§ 173.168, 178.2, 178.601, Appendix C to Part 178, Appendix D to Part 178.</ENT> </ROW> <ROW> <ENT I="01">2137-0582</ENT> <ENT>Container Certification Statement</ENT> <ENT>§§ 176.27, 176.172.</ENT> </ROW> <ROW> <ENT I="01">2137-0586</ENT> <ENT>Hazardous Materials Public Sector Training and Planning Grants</ENT> <ENT>Part 110.</ENT> </ROW> <ROW> <ENT I="01">2137-0591</ENT> <ENT>Response Plans for Shipments of Oil</ENT> <ENT>Part 130.</ENT> </ROW> <ROW> <ENT I="01">2137-0595</ENT> <ENT>Cargo Tank Motor Vehicles in Liquefied Compressed Gas Service</ENT> <ENT>§§ 173.315, 178.337-8, 178.337-9, 180.405, 180.416.</ENT> </ROW> <ROW> <ENT I="01">2137-0612</ENT> <ENT>Hazardous Materials Security Plans</ENT> <ENT>Part 172, Subpart I, §§ 172.800, 172.802, 172.804.</ENT> </ROW> <ROW> <ENT I="01">2137-0613</ENT> <ENT>Subsidiary Hazard Class and Number/Type of Packagings</ENT> <ENT>§§ 172.202, 172.203</ENT> </ROW> <ROW> <ENT I="01">2137-0620</ENT> <ENT>Inspection and Testing of Meter Provers</ENT> <ENT>Part 173, Subpart A, § 173.5a.</ENT> </ROW> <ROW> <ENT I="01">2137-0621</ENT> <ENT>Requirements for United Nations (UN) Cylinders</ENT> <ENT>§§ 173.301, 173.304, 173.304b, 178.69, 178.70, 178.74, 178.75, 180.207, 180.209, 180.212, 180.215, 180.217.</ENT> </ROW> </GPOTABLE> <CITA>[Amdt. 171-111, 56 FR 66157]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 171.6, see the List of CFR Sections Affected which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 171.7</SECTNO> <SUBJECT>Reference material.</SUBJECT> <P>(a) <E T="03">Matter incorporated by reference</E>—(1) <E T="03">General.</E> There is incorporated, by reference in parts 170-189 of this subchapter, matter referred to that is not specifically set forth. This matter is hereby made a part of the regulations in parts 170-189 of this subchapter. The matter subject to change is incorporated only as it is in effect on the <PRTPAGE P="85"/>date of issuance of the regulation referring to that matter. The material listed in paragraph (a)(3) has been approved for incorporation by reference by the Director of the Federal Register in accordance with 5 U.S.C 552(a) and 1 CFR part 51. Material is incorporated as it exists on the date of the approval and a notice of any change in the material will be published in the <E T="04">Federal Register.</E> Matters referenced by footnote are included as part of the regulations of this subchapter.</P> <P>(2) <E T="03">Accessibility of materials.</E> All incorporated matter is available for inspection at:</P> <P>(i) The Office of Hazardous Materials Safety, Office of Hazardous Materials Standards, East Building, PHH-10, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001. For information on the availability of this material at PHH-10, call 1-800-467-4922, or go to: <E T="03">http://www.phmsa.dot.gov</E>; and</P> <P>(ii) The National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: <E T="03">http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.</E> </P> <P>(3) <E T="03">Table of material incorporated by reference.</E> The following table sets forth material incorporated by reference. The first column lists the name and address of the organization from which the material is available and the name of the material. The second column lists the section(s) of this subchapter, other than § 171.7, in which the matter is referenced. The second column is presented for information only and may not be all inclusive.</P> <GPOTABLE CDEF="s200,r40" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">Source and name of material</CHED> <CHED H="1">49 CFR reference</CHED> </BOXHD> <ROW> <ENT I="22"> <E T="03">Air Transport Association of America,</E> 1301 Pennsylvania Avenue, N.W., Washington, DC 20004-1707:</ENT> </ROW> <ROW> <ENT I="03">ATA Specification No. 300 Packaging of Airline Supplies, Revision 19, July 31, 1996</ENT> <ENT>172.102.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">The Aluminum Association,</E> 420 Lexington Avenue, New York, NY 10017, telephone 301-645-0756, <E T="03">http://www.aluminum.org</E>:</ENT> </ROW> <ROW> <ENT I="03">Aluminum Standards and Data, Seventh Edition, June 1982</ENT> <ENT>172.102; 178.65.</ENT> </ROW> <ROW> <ENT I="03">Welding Aluminum: Theory and Practice, 2002 Fourth Edition</ENT> <ENT>178.68</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">American National Standards Institute, Inc.,</E> 25 West 43rd Street, New York, NY 10036:</ENT> </ROW> <ROW> <ENT I="03">ANSI/ASHRAE 15-94, Safety Code for Mechanical Refrigeration</ENT> <ENT>173.306; 173.307.</ENT> </ROW> <ROW> <ENT I="03">ANSI B16.5-77, Steel Pipe Flanges, Flanged Fittings</ENT> <ENT>178.360-4.</ENT> </ROW> <ROW> <ENT I="03">ANSI N14.1 Uranium Hexafluoride—Packaging for Transport, 1971, 1982, 1987, 1990, 1995 and 2001 Editions</ENT> <ENT>173.417; 173.420.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">American Petroleum Institute,</E> 1220 L Street, NW, Washington, D.C. 20005-4070:</ENT> </ROW> <ROW> <ENT I="03">API Recommended Practice Closures of Underground Petroleum Storage Tanks, 3rd Edition, March 1996</ENT> <ENT>172.102.</ENT> </ROW> <ROW> <ENT I="22">American Pyrotechnics Association (APA), P.O. Box 30438, Bethesda, MD 20824, (301) 907-8181, www.americanpyro.com:</ENT> </ROW> <ROW> <ENT I="03">APA Standard 87-1, Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics, December 1, 2001 version</ENT> <ENT>173.56.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">American Society of Mechanical Engineers,</E> ASME International, 22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007-2900, telephone 1-800-843-2763 or 1-973-882-1170, <E T="03">http://www.asme.org</E>:</ENT> </ROW> <ROW> <PRTPAGE P="86"/> <ENT I="03">‘ASME Code’; ASME Code, Sections II (Parts A and B), V, VIII (Division 1), and IX of 1998 Edition of American Society of Mechanical Engineers Boiler and Pressure Vessel Code</ENT> <ENT>172.102; 173.5b; 173.24b; 173.32; 173.306; 173.315; 173.318; 173.420; 178.245-1; 178.245-3; 178.245-4; 178.245-6; 178.245-7; 178.255-1; 178.255-2; 178.255-14; 178.255-15; 178.270-2; 178.270-3; 178.270-7; 178.270-9; 178.270-11; 178.270-12; 178.271-1; 178.272-1; 178.273; 178.274; 178.276; 178.277; 178.320; 178.337-1; 178.337-2; 178.337-3; 178.337-4; 178.337-6; 178.337-16; 178.337-18; 178.338-1; 178.338-2; 178.338-3; 178.338-4; 178.338-5; 178.338-6; 178.338-13; 178.338-16; 178.338-18; 178.338-19; 178.345-1; 178.345-2; 178.345-3; 178.345-4; 178.345-7; 178.345-14; 178.345-15; 178.346-1; 178.347-1; 178.348-1; 179.400-3; 180.407.</ENT> </ROW> <ROW> <ENT I="03">Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids, Chapters II, III, IV, V and VI, ASME B31.4-1998 Edition</ENT> <ENT>173.5a.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">American Society for Testing and Materials,</E> 100 Barr Harbor Drive, West Conshohocken, PA 1942, telephone (610) 832-9585, <E T="03">http://www.astm.org</E>:</ENT> </ROW> <ROW> <ENT I="13">Noncurrent ASTM Standards are available from: Engineering Societies Library, 354 East 47th Street, New York, NY 10017</ENT> </ROW> <ROW> <ENT I="03">ASTM A 20/A 20M-93a Standard Specification for General Requirements for Steel Plates for Pressure Vessels</ENT> <ENT>178.337-2; 179.102-4; 179.102-1; 179.102-17.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 47-68 Malleable Iron Castings</ENT> <ENT>179.200-15.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 53, ASTM A 53/A 53M-06a Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless</ENT> <ENT>173.5b.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 106, ASTM A 106/A 106M-06a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service</ENT> <ENT>173.5b.</ENT> </ROW> <ROW> <PRTPAGE P="87"/> <ENT I="03">ASTM A 240/A 240M-99b Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels</ENT> <ENT>178.57; 178.358-5; 179.100-7; 179.100-10; 179.102-1; 179.102-4; 179.102-17; 179.200-7; 179.201-5; 179.220-7; 179.300-7; 179.400-5.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 242-81 Standard Specification for High-Strength Low-Alloy Structural Steel</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 262-93a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels</ENT> <ENT>179.100-7; 179.200-7; 179.201-4.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 285-78 Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength</ENT> <ENT>179.300-7.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 300-58 Steel Plates for Pressure Vessels for Service at Low Temperatures</ENT> <ENT>178.337-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 302/A 302M-93 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel</ENT> <ENT>179.100-7; 179.200-7; 179.220-7.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 333-67 Seamless and Welded Steel Pipe for Low-Temperature Service</ENT> <ENT>178.45.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 370-94 Standard Test 179.102-1; 179.102-4; Methods and Definitions for Mechanical Testing of Steel Products</ENT> <ENT>179.102-17.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 441-81 Standard Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 514-81 Standard Specification for High-Yield Strength Quenched and Tempered Alloy Steel Plate, Suitable for Welding</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 515/A 515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service</ENT> <ENT>179.300-7.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 516/A 516M-90 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service</ENT> <ENT>178.337-2; 179.100-7; 179.102-1; 179.102-2; 179.102-4; 179.102-17; 179.200-7; 179.220-7; 179.300-7.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 537/A 537M-91 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel</ENT> <ENT>179.100-7; 179.102-4; 179.102-17.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 572-82 Standard Specification for High-Strength Low-Alloy Columbian-Vanadium Steels of Structural Quality</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 588-81 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 Ksi Minimum Yield Point to 4 in. Thick</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 606-75 Standard Specification for Steel Sheet and Strip Hot- Rolled and Cold-Rolled, High-Strength, Low-Alloy, with Improved Atmospheric Corrosion Resistance, 1975 (Reapproved 1981)</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 607-98 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 612-72a High Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service</ENT> <ENT>178.337-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 633-79a Standard Specification for Normalized High-Strength Low-Alloy Structural Steel, 1979 Edition</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 715-81 Standard Specification for Steel Sheet and Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability, 1981</ENT> <ENT>178.338-2.</ENT> </ROW> <ROW> <ENT I="03">ASTM A 1008/A 1008M—03 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High Strength Low-Alloy with Improved Formability</ENT> <ENT>178.338-2; 178.345-2</ENT> </ROW> <ROW> <ENT I="03">ASTM A 1011/A 1011M—03a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low Alloy and High Strength Low-Alloy with Improved Formability</ENT> <ENT>178.338-2; 178.345-2</ENT> </ROW> <ROW> <ENT I="03">ASTM B 162-93a Standard Specification for Nickel Plate, Sheet, and Strip</ENT> <ENT>173.249; 179.200-7.</ENT> </ROW> <ROW> <ENT I="03">ASTM B 209-93 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate</ENT> <ENT>179.100-7; 179.200-7; 179.220-7.</ENT> </ROW> <ROW> <ENT I="03">ASTM B 221-76 Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes</ENT> <ENT>178.46.</ENT> </ROW> <ROW> <ENT I="03">ASTM B 557-84 Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products</ENT> <ENT>178.46.</ENT> </ROW> <ROW> <ENT I="03">ASTM B 580-79 Standard Specification for Anodic Oxide Coatings on Aluminum, (Re-approved 2000)</ENT> <ENT>173.316; 173.318; 178.338-17.</ENT> </ROW> <ROW> <ENT I="03">ASTM D 1238-90b Standard Test Method for Flow Rates of Thermoplastics for Extrusion Plastometer</ENT> <ENT>173.225.</ENT> </ROW> <ROW> <ENT I="03">ASTM D 1709-01 Standard Text Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method</ENT> <ENT>173.197.</ENT> </ROW> <ROW> <ENT I="03">ASTM D 1835-97 Standard Specification for Liquefied Petroleum (LP) Gases</ENT> <ENT>180.209.</ENT> </ROW> <ROW> <PRTPAGE P="88"/> <ENT I="03">ASTM D 1838-64 Copper Strip Corrosion by Liquefied Petroleum (LP) Gases</ENT> <ENT>173.315.</ENT> </ROW> <ROW> <ENT I="03">ASTM D 1922-00a Standard Test Method for Propogation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method</ENT> <ENT>173.197.</ENT> </ROW> <ROW> <ENT I="03">ASTM D 4206-96 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus</ENT> <ENT>173.120.</ENT> </ROW> <ROW> <ENT I="03">ASTM D 4359-90 Standard Test Method for Determining Whether a Material is a Liquid or a Solid</ENT> <ENT>171.8.</ENT> </ROW> <ROW> <ENT I="03">ASTM E 8-99 Standard Test Methods for Tension Testing of Metallic Materials</ENT> <ENT>178.36; 178.37; 178.38; 178.39; 178.44; 178.45; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.68.</ENT> </ROW> <ROW> <ENT I="03">ASTM E 23-98 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials</ENT> <ENT>178.57.</ENT> </ROW> <ROW> <ENT I="03">ASTM E 112-88 Standard Test Methods for Determining Average Grain Size</ENT> <ENT>178.44.</ENT> </ROW> <ROW> <ENT I="03">ASTM E 112-96 Standard Test Methods for Determining Average Grain Size, 1996 Edition</ENT> <ENT>178.274; Part 178, appendix A.</ENT> </ROW> <ROW> <ENT I="03">ASTM E 114-95 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method</ENT> <ENT>178.45.</ENT> </ROW> <ROW> <ENT I="03">ASTM E 213-98 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing</ENT> <ENT>178.45.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">American Water Works Association,</E> 1010 Vermont Avenue, N.W., Suite 810, Washington, DC 20005:</ENT> </ROW> <ROW> <ENT I="03">AWWA Standard C207-55, Steel Pipe Flanges, 1955</ENT> <ENT>178.360-4.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">American Welding Society,</E> 550 N.W. Le Jeune Road, Miami, Florida 33126:</ENT> </ROW> <ROW> <ENT I="03">AWS Code B 3.0; Standard Qualification Procedure; 1972 (FRB 3.0-41, rev. May 1973)</ENT> <ENT>178.356-2, 178.358-2.</ENT> </ROW> <ROW> <ENT I="03">AWS Code D 1.0; Code for Welding in Building Construction (FR D 1.0-66, 1966)</ENT> <ENT>178.356-2; 178.358-2.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Association of American Railroads</E>, American Railroads Building, 50 F Street, NW., Washington, DC 20001; telephone (877) 999-8824, <E T="03">http://www.aar.org/publications.com</E>;</ENT> </ROW> <ROW> <PRTPAGE P="89"/> <ENT I="03">AAR Manual of Standards and Recommended Practices, Section C—Part III, Specifications for Tank Cars, Specification M-1002, (AAR Specifications for Tank Cars), December 2000</ENT> <ENT>173.31; 174.63; 179.6; 179.7; 179.15; 179.16; 179.20; 179.22; 179.100-9; 179.100-10; 179.100-12; 179.100-13; 179.100-14; 179.100-18; 179.101-1; 179.102-1; 179.102-4; 179.102-17; 179.103-5; 179.200-7; 179.200-9; 179.200-10; 179.200-11; 179.200-13; 179.200-17; 179.200-22; 179.201-6; 179.220-6; 179.220-7; 179.220-10; 179.220-11; 179.220-14; 179.220-18; 179.220-26; 179.300-9; 179.300-10; 179.300-15; 179.300-17; 179.400-5; 179.400-6; 179.400-8; 179.400-11; 179.400-12; 179.400-15; 179.400-18; 179.400-20; 179.400-25; 180.509; 180.513; 180.515; 180.517.</ENT> </ROW> <ROW> <ENT I="03">AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment, 1988</ENT> <ENT>174.55; 174.63.</ENT> </ROW> <ROW> <ENT I="03">AAR Specifications for Design, Fabrication and Construction of Freight Cars, Volume 1, 1988</ENT> <ENT>179.16.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Chlorine Institute, Inc.</E>, 1300 Wilson Boulevard, Arlington, VA 22209</ENT> </ROW> <ROW> <ENT I="03">AAR Standard 286; AAR Manual of Standards and Recommended Practices, Section C, Car Construction Fundamentals and Details, Standard S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail Load Cars (Adopted 2002; Revised: 2003, 2005, 2006)</ENT> <ENT>179.13</ENT> </ROW> <ROW> <ENT I="03">Chlorine Institute Emergency Kit “A” for 100-lb. & 150 lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks), Edition 10, June 2003</ENT> <ENT>173.3</ENT> </ROW> <ROW> <ENT I="03">Chlorine Institute Emergency Kit “B” for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks), Edition 9, June 2003</ENT> <ENT>173.3</ENT> </ROW> <ROW> <ENT I="03">Type 1<FR>1/2</FR> JQ 225, Dwg., H51970, Revision F, November 1996; or Type 1<FR>1/2</FR> JQ 225, Dwg. H50155, Revision H, November 1996</ENT> <ENT>173.315.</ENT> </ROW> <ROW> <ENT I="03">Section 3, Pamphlet 57, Emergency Shut-Off Systems for Bulk Transfer of Chlorine, Edition 4, October 2003</ENT> <ENT>177.840.</ENT> </ROW> <ROW> <ENT I="03">Section 3, Pamphlet 166, Angle Valve Guidelines for Chlorine Bulk Transportation, 1st Edition, October 2002</ENT> <ENT>178.337-9.</ENT> </ROW> <ROW> <ENT I="03">Standard Chlorine Angle Valve Assembly, Dwg. 104-8, July 1993</ENT> <ENT>178.337-9.</ENT> </ROW> <ROW> <ENT I="03">Excess Flow Valve with Removable Seat, Dwg. 101-7, July 1993</ENT> <ENT>178.337-8.</ENT> </ROW> <ROW> <ENT I="03">Excess Flow Valve with Removable Basket, Dwg. 106-6, July 1993</ENT> <ENT>178.337-8.</ENT> </ROW> <ROW> <ENT I="03">Standards for Housing and Manway Covers for Steel Cargo Tanks, Dwgs. 137-1 and 137-2, September 1, 1982</ENT> <ENT>178.337-10.</ENT> </ROW> <ROW> <ENT I="03">Typical Manway Arrangement Chlorine Cargo Tank, Dwg 137-5, November 1996</ENT> <ENT>178.337-10.</ENT> </ROW> <ROW> <ENT I="01">Canadian General Standards Board, Place du Portage III, 6B1 11</ENT> <ENT>171.12</ENT> </ROW> <ROW> <ENT I="22">Laurier Street, Gatineau, Quebec, Canada K1A 1G6</ENT> </ROW> <ROW> <ENT I="03">National Standard of Canada (CAN/CGSB 43.147—2005) Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail</ENT> </ROW> <ROW> <PRTPAGE P="90"/> <ENT I="03">CGA Pamphlet C-3, Standards for Welding on Thin-Walled Steel Cylinders, 1994</ENT> <ENT>178.47; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.65; 178.68; 180.211.</ENT> </ROW> <ROW> <ENT I="03">CGA C-5, Cylinder Service Life—Seamless Steel High Pressure Cylinders, 1991 (reaffirmed 1995)</ENT> <ENT>173.302a.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-6, Standards for Visual Inspection of Steel Compressed Gas Cylinders, 1993</ENT> <ENT>173.3, 173.198, 180.205, 180.209, 180.211, 180.411, 180.519.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-6.1, Standards for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders, 2002, Fourth Edition</ENT> <ENT>180.205; 180.209</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-6.2, Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders, 1996, Third Edition</ENT> <ENT>180.205.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-6.3, Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders, 1991</ENT> <ENT>180.205; 180.209.</ENT> </ROW> <ROW> <ENT I="03">CGA C-7, Guide to Preparation of Precautionary Labeling and Marking of Compressed Gas Containers, Appendix A, issued 2004 (8th Edition)</ENT> <ENT>172.400a.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-8, Standard for Requalification of DOT-3HT Cylinder Design, 1985</ENT> <ENT>180.205; 180.209.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-11, Recommended Practices for Inspection of Compressed Gas Cylinders at Time of Manufacture, 2001, Third Edition</ENT> <ENT>178.35.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-12, Qualification Procedure for Acetylene Cylinder Design, 1994</ENT> <ENT>173.301; 173.303; 178.59; 178.60.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-13, Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders, 2000, Fourth Edition</ENT> <ENT>173.303; 180.205; 180.209.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet C-14, Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems, 1979</ENT> <ENT>173.301; 173.323.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet G-2.2, Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia, 1985, Second Edition, Reaffirmed 1997</ENT> <ENT>173.315.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet G-4.1, Cleaning Equipment for Oxygen Service, 1985</ENT> <ENT>178.338-15.</ENT> </ROW> <ROW> <ENT I="01">CGA Pamphlet P-20, Standard for the Classification of Toxic Gas Mixtures, 2003, Third Edition</ENT> <ENT>173.115.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet P-20, Standard for the Classification of Toxic Gas Mixtures, 1995</ENT> <ENT>173.115.</ENT> </ROW> <ROW> <ENT I="03">CGA S-1.1, Pressure Relief Device Standards—Part 1—Cylinders for Compressed Gases, 2005 (with the exception of paragraph 9.1.1.1), Twelfth Edition</ENT> <ENT>173.301, 173.304a 178.75.</ENT> </ROW> <ROW> <ENT I="03">CGA Pamphlet S-1.2, Safety Relief Device Standards Part 2—Cargo and Portable Tanks for Compressed Gases, 1980</ENT> <ENT>173.315; 173.318; 178.276; 178.277.</ENT> </ROW> <ROW> <ENT I="03">CGA S-7, Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders, 2005</ENT> <ENT>173.301.</ENT> </ROW> <ROW> <ENT I="03">CGA Technical Bulletin TB-2, Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks, 1980</ENT> <ENT>180.407; 180.413.</ENT> </ROW> <ROW> <ENT I="03">CGA Technical Bulletin TB-25, Design Considerations for Tube Trailers, 2008 Edition</ENT> <ENT>173.301.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Department of Defense (DOD),</E> 2461 Eisenhower Avenue, Alexandria, VA 22331:</ENT> </ROW> <ROW> <ENT I="03">DOD TB 700-2; NAVSEAINST 8020.8B; AFTO 11A-1-47; DLAR 8220.1: Explosives Hazard Classification Procedures, January 1998</ENT> <ENT>173.56.</ENT> </ROW> <ROW> <ENT I="03">Packaging of Hazardous Material, DLAD 4145.41/ AR 700-143/AFJI 24-210/NAVSUPINST 4030.55B/MCO 4030.40B, January 14, 2000</ENT> <ENT>173.7</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Department of Energy (USDOE),</E> 100 Independence Avenue SW., Washington, DC 20545:</ENT> </ROW> <ROW> <ENT I="13">USDOE publications available from: Superintendent of Documents, Government Printing Office (GPO) or The National Technical Information Service (NTIS).</ENT> </ROW> <ROW> <ENT I="03">USDOE, CAPE-1662, Revision 1, and Supplement 1, Civilian Application Program Engineering Drawings, April 6, 1988</ENT> <ENT>178.356-1; 178.356-2; 178.358-1; 178.358-2; 178.358-3; 178.358-4.</ENT> </ROW> <ROW> <ENT I="03">USDOE, Material and Equipment Specification No. SP-9, Rev. 1, and Supplement—Fire Resistant Phenolic Foam, March 28, 1968</ENT> <ENT>178.356-2; 178.358-2.</ENT> </ROW> <ROW> <ENT I="03">USDOE, KSS-471, November 30, 1986—Proposal for Modifications to U.S. Department of Transportation Specification 21PF-1, Fire and Shock Resistant Phenolic Foam—Insulated Metal Overpack</ENT> <ENT>178.358-1; 178.358-3.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">General Services Administration,</E> Specification Office, Room 6662, 7th and D Street, S.W., Washington, DC 20407:</ENT> </ROW> <ROW> <ENT I="03">Federal Specification RR-C-901D, Cylinders, Compressed Gas: Seamless Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum, February 21, 2003 (Superseding RR-C-901C, 1981)</ENT> <ENT>173.302; 173.336; 173.337.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Institute of Makers of Explosives,</E> 1120 19th Street NW., Suite 310, Washington, DC 20036-3605:</ENT> </ROW> <ROW> <ENT I="03">IME Safety Library Publication No. 22 (IME Standard 22), Recommendation for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials, May 1993</ENT> <ENT>173.63; 177.835.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">International Atomic Energy Agency (IAEA),</E> P.O. Box 100, Wagramer Strasse 5, A-1400 Vienna, Austria:</ENT> </ROW> <ROW> <PRTPAGE P="91"/> <ENT I="13">Also available from: Bernan Associates, 4611-F Assembly Drive, Lanham, MD 20706-4391, USA; or Renouf Publishing Company, Ltd., 812 Proctor Avenue, Ogdensburg, New York 13669, USA.</ENT> </ROW> <ROW> <ENT I="03">IAEA, Regulations for the Safe Transport of Radioactive Material, (IAEA Regulations), 1996 Edition (Revised), No. TS-R-1 (ST-1, Revised)</ENT> <ENT>171.22; 171.23; 171.26, 173.415, 173.416, 173.417, 173.473</ENT> </ROW> <ROW> <ENT I="22">International Civil Aviation Organization (“ICAO”), 999 University Street, Montréal, Quebec H3C 5H7, Canada, 1-514-954-8219, <E T="03">http://www.icao.int:</E> </ENT> </ROW> <ROW> <ENT I="13">ICAO Technical Instructions available from: INTEREG, International Regulations, Publishing and Distribution Organization, P.O. Box 60105, Chicago, IL 60660.</ENT> </ROW> <ROW> <ENT I="01">Technical Instructions for the Safe Transport of Dangerous Goods by Air (“ICAO Technical Instructions”), 2009-2010 Edition</ENT> <ENT>171.8; 171.22; 171.23; 171.24; 172.202; 172.401; 172.512; 172.602; 173.56; 173.320; 175.33; 178.3.</ENT> </ROW> <ROW> <ENT I="22">International Electrotechnical Commission (IEC) 3, rue de Varembé, P.O. Box 131, CH—1211, GENEVA 20, Switzerland:</ENT> </ROW> <ROW> <ENT I="03">Fuel cell technologies—Part 6-1: Micro fuel cell power systems—Safety, IEC/PAS 62282-6-1:2006(E), First Edition 2006-02, with Corrigendum 1, First Edition 2007-04</ENT> <ENT>§ 175.10.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">International Maritime Organization (“IMO”)</E>, 4 Albert Embankment, London, SE1 7SR, United Kingdom or New York Nautical Instrument & Service Corporation, 140 West Broadway, New York, NY 10013, +44 (0) 20 7735 7611, <E T="03">http://www.imo.org</E>:</ENT> </ROW> <ROW> <ENT I="01">International Convention for the Safety of Life at Sea, (“SOLAS”) 176.63, 176.84. Amendments 2002, Chapter II-2/Regulation 19, Consolidated Edition 2004.</ENT> </ROW> <ROW> <ENT I="01">International Maritime Dangerous Goods Code (“IMDG Code”), 2008 Edition, Incorporating Amendment 34-08 (English Edition), Volumes 1 and 2</ENT> <ENT>171.22; 171.23; 171.25; 172.101 Appendix B; 172.202; 172.401; 172.502; 172.602; 173.21; 173.56; 176.2; 176.5; 176.11; 176.27; 176.30; 176.84; 178.3; 178.274.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">International Organization for Standardization,</E> Case Postale 56, CH-1211, Geneve 20, Switzerland, <E T="03">http://www.iso.org</E>:</ENT> </ROW> <ROW> <ENT I="13">Also available from: ANSI 25, West 43rd Street, New York, NY 10036, 1-212-642-4900, <E T="03">http://www.ansi.org</E>.</ENT> </ROW> <ROW> <ENT I="03">ISO 535-1991(E) Paper and board—Determination of water absorptiveness—Cobb method</ENT> <ENT>178.516; 178.707; 178.708.</ENT> </ROW> <ROW> <ENT I="03">ISO 1496-1: 1990 (E)—Series 1 freight containers—Specification and testing, Part 1: General cargo containers. Fifth Edition, (August 15, 1990)</ENT> <ENT>173.411</ENT> </ROW> <ROW> <ENT I="03">ISO 1496-3—Series 1 freight containers—Specification and testing—Part 3: Tank containers for liquids, gases and pressurized dry bulk, Fourth edition, March 1995, (E)</ENT> <ENT>178.74; 178.75; 178.274.</ENT> </ROW> <ROW> <ENT I="03">ISO 2431-1984(E) Standard Cup Method</ENT> <ENT>173.121.</ENT> </ROW> <ROW> <ENT I="03">ISO 2592-1973(E) Petroleum products—Determination of flash and fire points—Cleveland open cup method</ENT> <ENT>173.120.</ENT> </ROW> <ROW> <ENT I="03">ISO 2919-1980(E) Sealed radioactive sources—Classification</ENT> <ENT>173.469.</ENT> </ROW> <ROW> <ENT I="03">ISO 3036-1975(E) Board—Determination of puncture resistance</ENT> <ENT>178.708.</ENT> </ROW> <ROW> <ENT I="03">ISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial and drawing qualities</ENT> <ENT>178.503; Part 178, appendix C.</ENT> </ROW> <ROW> <ENT I="03">ISO 3807-2, Cylinders for acetylene—Basic requirements—Part 2: Cylinders with fusible plugs, First edition, March 2000, (E)</ENT> <ENT>173.303; 178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 4126-1 Safety valves—Part 1: General Requirements, December 15, 1991, First Edition</ENT> <ENT>178.274.</ENT> </ROW> <ROW> <ENT I="03">ISO 6406, Gas cylinders—Seamless steel gas cylinders—Periodic inspection and testing, Second edition, February 2005, (E)</ENT> <ENT>180.207.</ENT> </ROW> <ROW> <ENT I="03">ISO 6892 Metallic materials—Tensile testing, July 15, 1984, First Edition</ENT> <ENT>178.274.</ENT> </ROW> <ROW> <ENT I="03">ISO 7225, Gas cylinders—Precautionary labels, Second Edition, July 2005, (E)</ENT> <ENT>178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 7866, Gas cylinders—Refillable seamless aluminum alloy gas cylinders—Design, construction and testing, First edition, June 1999, (E)</ENT> <ENT>178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 8115 Cotton bales—Dimensions and density, 1986 Edition</ENT> <ENT>172.102.</ENT> </ROW> <ROW> <ENT I="03">ISO 9809-1: Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa., First edition, June 1999, (E)</ENT> <ENT>178.37; 178.71; 178.75.</ENT> </ROW> <ROW> <ENT I="03">ISO 9809-2: Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa., First edition, June 2000, (E)</ENT> <ENT>178.71; 178.75.</ENT> </ROW> <ROW> <ENT I="03">ISO 9809-3: Gas cylinders—Refillable seamless steel gas cylinders—Design, construction and testing—Part 3: Normalized steel cylinders, First edition, December 2000, (E)</ENT> <ENT>178.71; 178.75.</ENT> </ROW> <ROW> <ENT I="03">ISO 9978:1992(E)—Radiation protection—Sealed radioactive sources—Leakage test methods. First Edition, (February 15, 1992)</ENT> <ENT>173.469.</ENT> </ROW> <ROW> <PRTPAGE P="92"/> <ENT I="01">ISO 10156:1996, Gases and Gas Mixtures—Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets, Second edition, February 1996 (E)</ENT> <ENT>173.115.</ENT> </ROW> <ROW> <ENT I="01">ISO 10156-2:2005, Gas cylinders—Gases and gas mixtures—Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures, First edition, August 2005, (E)</ENT> <ENT>173.115.</ENT> </ROW> <ROW> <ENT I="03">ISO 10297, Gas cylinders—Refillable gas cylinder valves—Specification and type testing, First edition, May 1999, (E)</ENT> <ENT>173.301b, 178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 10461, Gas cylinders—Seamless aluminum—alloy gas cylinders—Periodic inspection and testing, Second edition, February 2005, (E)</ENT> <ENT>180.207.</ENT> </ROW> <ROW> <ENT I="03">ISO 10462, Gas cylinders—Transportable cylinders for dissolved acetylene—Periodic inspection and maintenance, Second edition, February 2005, (E)</ENT> <ENT>180.207.</ENT> </ROW> <ROW> <ENT I="03">ISO 11114-1, Transportable gas cylinders—Compatibility of cylinder and valve materials with gas contents—Part 1: Metallic materials, First edition, October 1997, (E)</ENT> <ENT>173.301b; 178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 11114-2, Transportable gas cylinders—Compatibility of cylinder and valve materials with gas contents—Part 2: Non-metallic materials, First edition, December 2000, (E)</ENT> <ENT>173.301b; 178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 11117, Gas cylinders—Valve protection caps and valve guards for industrial and medical gas cylinders—Design, construction and tests, First edition, August 1998, (E)</ENT> <ENT>173.301b.</ENT> </ROW> <ROW> <ENT I="03">ISO 11118, Gas cylinders—Non-refillable metallic gas cylinders—Specification and test methods, First edition, October 1999, (E)</ENT> <ENT>178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 11119-1, Gas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 1: Hoop-wrapped composite gas cylinders, First edition, May 2002, (E)</ENT> <ENT>178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 11119-2, Gas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners, First edition, May 2002, (E)</ENT> <ENT>178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 11119-3, Gas cylinders of composite construction—Specification and test methods—Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners, First edition, September 2002, (E)</ENT> <ENT>178.71.</ENT> </ROW> <ROW> <ENT I="03">ISO 11120, Gas cylinders—Refillable seamless steel tubes of water capacity between 150 L and 3000 L—Design, construction and testing, First edition, March 1999, (E)</ENT> <ENT>178.71; 178.75.</ENT> </ROW> <ROW> <ENT I="03">ISO 11621, Gas cylinders—Procedures for change of gas service, First edition, April 1997, (E)</ENT> <ENT>173.302, 173.336, 173.337.</ENT> </ROW> <ROW> <ENT I="03">ISO 11623, Transportable gas cylinders—Periodic inspection and testing of composite gas cylinders, First edition, March 2002, (E)</ENT> <ENT>180.207.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">National Board of Boiler and Pressure Vessel Inspectors,</E> 1055 Crupper Avenue, Columbus, Ohio 43229:</ENT> </ROW> <ROW> <ENT I="03">National Board Inspection Code, A Manual for Boiler and Pressure Vessel Inspectors, NB-23, 1992 Edition</ENT> <ENT>180.413.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">National Fire Protection Association,</E> Batterymarch Park, Quincy, MA 02269:</ENT> </ROW> <ROW> <ENT I="03">NFPA 58-Liquefied Petroleum Gas Code, 2001 Edition</ENT> <ENT>173.315.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">National Institute of Standards and Technology,</E> Department of Commerce, 5285 Port Royal Road, Springfield, VA 22151:</ENT> </ROW> <ROW> <ENT I="03">USDC, NBS Handbook H-28 (1957), 1957 Handbook of Screw-Thread Standards for Federal Services, December 1966 Edition</ENT> <ENT>179.2; 178.45; 178.46.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Organization for Economic Cooperation and Development (OECD),</E> OECD Publications and Information Center, 2001 L Street, N.W., Suite 700, Washington, DC 20036:</ENT> </ROW> <ROW> <ENT I="03">OECD Guideline for Testing of Chemicals, No. 404 “Acute Dermal Irritation/Corrosion,” 1992</ENT> <ENT>173.137.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Transport Canada</E>, TDG Canadian Government Publishing Center, Supply and Services, Canada, Ottawa, Ontario, Canada K1A 059, 416-973-1868, <E T="03">http://www.tc.gc.ca</E>:</ENT> </ROW> <ROW> <ENT I="03">Transportation of Dangerous Goods Regulations (Transport Canada TDG Regulations), August 2001 including Clear Language Amendments SOR 2001-286, Amendment 1 (SOR/2002-306) August 8, 2002; Amendment 2 (SOR/2003-273) July 24, 2003; Amendment 3 (SOR/2003-400) December 3, 2003; Amendment 4 (SOR/2005-216) July 13, 2005; Amendment 5 (SOR/2005-279) September 21, 2005; and subsection 4.18(5) of Amendment 6 (SOR/2008-34) February 7, 2008</ENT> <ENT>171.12; 171.22; 171.23; 172.401; 172.502; 172.519; 172.602; 173.31; 173.32; 173.33.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">Truck Trailer Manufacturers Association,</E> 1020 Princess Street, Alexandria, Virginia 22314:</ENT> </ROW> <ROW> <ENT I="03">TTMA RP No. 61-98, Performance of manhole and/or Fill Opening Assemblies on MC 306, DOT 406, Non-ASME MC 312 and Non-ASME DOT 412 Cargo Tanks, June 1, 1998</ENT> <ENT>180.405.</ENT> </ROW> <ROW> <ENT I="03">TTMA RP No. 81-97, Performance of Spring Loaded Pressure Relief Valves on MC 306, MC 307, MC 312, DOT 406, DOT 407, and DOT 412 Tanks, July 1, 1997 Edition</ENT> <ENT>178.345-10; 178.346-3.</ENT> </ROW> <ROW> <ENT I="03">TTMA TB No. 107, Procedure for Testing In-Service Unmarked and/or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole Covers, June 1, 1998 Edition</ENT> <ENT>180.405.</ENT> </ROW> <ROW> <ENT I="22"> <E T="03">United Nations</E>, Publications, 2 United Nations Plaza, Room DC2-853, New York, NY 10017, 1-212-963-8302, <E T="03">http://unp.un.org</E>.</ENT> </ROW> <ROW> <ENT I="01">UN Recommendations on the Transport of Dangerous Goods, Fifteenth revised edition (2007). Volumes I and II</ENT> <ENT>171.8; 171.12; 171.22; 171.23; 172.202; 172.401; 172.502; 173.22; 173.24; 173.24b; 173.40; 173.56; 173.192; 173.197; 173.302b; 173.304b; 178.75; 178.274; 178.801.</ENT> </ROW> <ROW> <PRTPAGE P="93"/> <ENT I="01">UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fourth revised edition, (2003), and Addendum 2, (2004)</ENT> <ENT>172.102; 173.21; 173.56; 173.57; 173.58; 173.115; 173.124; 173.125; 173.127; 173.128; 173.137; 173.185; Part 173, appendix H; 178.274.</ENT> </ROW> <ROW> <ENT I="22">United States Enrichment Corporation, Inc. (USEC):</ENT> </ROW> <ROW> <ENT I="03">USEC Inc., 6903 Rockledge Drive, Bethesda, MD 20817</ENT> </ROW> <ROW> <ENT I="03">USEC-651—Good Handling Practices for Uranium Hexafluoride, Revision 8, January 1999</ENT> <ENT>173.417</ENT> </ROW> </GPOTABLE> <P>(b) <E T="03">List of informational materials not requiring incorporation by reference.</E> The materials listed in this paragraph do not require approval for incorporation by reference and are included for informational purposes. These materials may be used as noted in those sections in which the material is referenced.</P> <GPOTABLE CDEF="s200,r40" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">Source and name of material</CHED> <CHED H="1">49 CFR reference</CHED> </BOXHD> <ROW> <ENT I="11"> <E T="03">American Biological Safety Association</E> </ENT> </ROW> <ROW> <ENT I="12">1202 Allanson Road, Mundelein, IL 60060</ENT> </ROW> <ROW> <ENT I="01">Risk Group Classification for Infectious Agents, 1998</ENT> <ENT>173.134</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">American Institute of Chemical Engineers (AIChE)</E>,</ENT> </ROW> <ROW> <ENT I="12">3 Park Avenue New York, NY 10016-5991</ENT> </ROW> <ROW> <ENT I="01">Process Safety Progress Journal, Vol. 21, No. 2</ENT> </ROW> <ROW> <ENT I="01">Example of a Test Method for Venting Sizing: OPPSD/SPI Methodology</ENT> <ENT>Note to § 173. 225(h)(3)(vi).</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">American Society for Testing and Materials,</E> 100 Barr Harbor Drive, West Conshohocken, PA 19428:</ENT> </ROW> <ROW> <ENT I="12">Noncurrent ASTM Standards are available from: Engineering Societies Library, 354 East 47th Street, New York, NY 10017</ENT> </ROW> <ROW> <ENT I="01">ASTM E 380-89 Standards for Metric Practice</ENT> <ENT>171.10</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">Association of American Railroads,</E> </ENT> </ROW> <ROW> <ENT I="12">American Railroads Building, 50 F Street, NW., Washington, DC 20001</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SE60CHT; SE60CC; SE60CHTE; SE60CE; SE60DC; SE60DE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SE67CC; SE67CE; SE67BHT; SE67BC; SE67BHTE; SE67BE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SE68BHT; SE68BC; SE68BHTE; SE68BE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SE69AHTE; SE69AE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SF70CHT; SF70CC; SF70CHTE; SF70CE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SF73AC; SF73AE; SF73AHT; SF73AHTE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="01">AAR Catalog Nos. SF79CHT; SF79CC; SF79CHTE; SF79CE</ENT> <ENT>179.14</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">Bureau of Explosives,</E> </ENT> </ROW> <ROW> <ENT I="12">Hazardous Materials Systems (BOE), Association of American Railroads, American Railroads Building, 50 F Street, NW., Washington, DC 20001</ENT> </ROW> <ROW> <ENT I="01">Fetterley's Formula (The Determination of the Relief Dimensions for Safety Valves on Containers in which Liquefied gas is charged and when the exterior surface of the container is exposed to a temperature of 1,200 °F.)</ENT> <ENT>173.315</ENT> </ROW> <ROW> <ENT I="01">Pamphlet 6, Illustrating Methods for Loading and Bracing Carload and Less-Than-Carload Shipments of Explosives and Other Dangerous Articles, 1962</ENT> <ENT>174.55; 174.101; 174.112; 174.115; 174.290</ENT> </ROW> <ROW> <ENT I="01">Pamphlet 6A (includes appendix No. 1, October 1944 and appendix 2, December 1945), Illustrating Methods for Loading and Bracing Carload and Less-Than-Carload Shipments of Loaded Projectiles, Loaded Bombs, etc., 1943</ENT> <ENT>174.101; 174.290</ENT> </ROW> <ROW> <ENT I="01">Pamphlet 6C, Illustrating Methods for Loading and Bracing Trailers and Less-Than-Trailer Shipments of Explosives and Other Dangerous Articles Via Trailer-on-Flatcar (TOFC) or Container-on-Flatcar (COFC), 1985</ENT> <ENT>174.55; 174.63; 174.101; 174.112; 174.115</ENT> </ROW> <ROW> <ENT I="01">Emergency Handling of Hazardous Materials in Surface Transportation, 1989</ENT> <ENT>171.7</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">Centers for Disease Control and Prevention</E> </ENT> </ROW> <ROW> <ENT I="12">1600 Clifton Road, Atlanta, GA 30333</ENT> </ROW> <ROW> <ENT I="01">Biosafety in Microbiological and Biomedical Laboratories, Fourth Edition, April 1999</ENT> <ENT>173.134</ENT> </ROW> <ROW> <ENT I="11">Compressed Gas Association, Inc., 4221 Walney Road, 5th Floor, Chantilly, Virginia 20151</ENT> </ROW> <ROW> <ENT I="01">CGA C-1.1, Personnel Training and Certification Guidelines for Cylinder Requalification By the Volumetric Expansion Method, 2004, First Edition</ENT> <ENT>180.209</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">National Institutes of Health</E> </ENT> </ROW> <ROW> <ENT I="12">Bethesda, MD 20892</ENT> </ROW> <ROW> <ENT I="01">NIH Guidelines for Research Involving Recombinant DNA Molecules (NIH Guidelines), January 2001, Appendix B</ENT> <ENT>173.134</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">Pantone Incorporated</E> </ENT> </ROW> <ROW> <ENT I="12">590 Commerce Boulevard, Carlstadt, New Jersey 07072-3098</ENT> </ROW> <ROW> <ENT I="01">Pantone <E T="51">®</E> Formula guide coated/uncoated, Second Edition 2004</ENT> <ENT>172.407, 172.519</ENT> </ROW> <ROW> <PRTPAGE P="94"/> <ENT I="11"> <E T="03">Society of Plastics Industries, Inc.,</E> </ENT> </ROW> <ROW> <ENT I="12">Organic Peroxide Producers Safety Division, 1275 K Street, NW., Suite 400, Washington, DC 20005</ENT> </ROW> <ROW> <ENT I="01">Self Accelerating Decomposition Temperature Test, 1972</ENT> <ENT>173.21</ENT> </ROW> <ROW> <ENT I="11"> <E T="03">Truck Trailer Manufacturers Association,</E> </ENT> </ROW> <ROW> <ENT I="12">1020 Princess Street, Alexandria, Virginia 22314, telephone (703) 549-3010, <E T="03">http://www.ttmanet.org</E>:</ENT> </ROW> <ROW> <ENT I="01">TTMA RP No. 96-01, TTMA RP No. 96-01, Structural Integrity of DOT 406, DOT 407, and DOT 412 Cylindrical Cargo Tanks, January 2001 Edition</ENT> <ENT>178.345-3 </ENT> </ROW> </GPOTABLE> <CITA>[Amdt. 171-111, 55 FR 52466, Dec. 21, 1990; 71 FR 78611, Dec. 29, 2006; 75 FR 69, Jan. 4, 2010]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 171.7, see the List of CFR Sections Affected which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>At 68 FR 19273, Apr. 18, 2003, § 171.7(a)(3) was amended by removing the entry for “TTMA TB No. 81” under “Truck Trailer Manufacturers Association”. The amendment could not be incorporated because that entry does not exist.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 171.8</SECTNO> <SUBJECT>Definitions and abbreviations.</SUBJECT> <P>In this subchapter,</P> <P> <E T="03">Administrator</E> means the Administrator, Pipeline and Hazardous Materials Safety Administration.</P> <P> <E T="03">Aerosol</E> means any non-refillable receptacle containing a gas compressed, liquefied or dissolved under pressure, the sole purpose of which is to expel a nonpoisonous (other than a Division 6.1 Packing Group III material) liquid, paste, or powder and fitted with a self-closing release device allowing the contents to be ejected by the gas.</P> <P> <E T="03">Aggregate lithium content</E> means the sum of the grams of lithium content or equivalent lithium content contained by the cells comprising a battery.</P> <P> <E T="03">Agricultural product</E> means a hazardous material, other than a hazardous waste, whose end use directly supports the production of an agricultural commodity including, but not limited to a fertilizer, pesticide, soil amendment or fuel. An <E T="03">agricultural product</E> is limited to a material in Class 3, 8 or 9, Division 2.1, 2.2, 5.1, or 6.1, or an ORM-D material.</P> <P> <E T="03">Approval</E> means a written authorization, including a competent authority approval, from the Associate Administrator or other designated Department official, to perform a function for which prior authorization by the Associate Administrator is required under subchapter C of this chapter (49 CFR parts 171 through 180.)</P> <P> <E T="03">Approved</E> means approval issued or recognized by the Department unless otherwise specifically indicated in this subchapter.</P> <P> <E T="03">Asphyxiant gas</E> means a gas which dilutes or replaces oxygen normally in the atmosphere.</P> <P> <E T="03">Associate Administrator</E> means the Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration.</P> <P> <E T="03">Atmospheric gases</E> means air, nitrogen, oxygen, argon, krypton, neon and xenon.</P> <P> <E T="03">Authorized Inspection Agency</E> means: (1) A jurisdiction which has adopted and administers one or more sections of the ASME Boiler and Pressure Vessel Code as a legal requirement and has a representative serving as a member of the ASME Conference Committee; or (2) an insurance company which has been licensed or registered by the appropriate authority of a State of the United States or a Province of Canada to underwrite boiler and pressure vessel insurance in such State or Province.</P> <P> <E T="03">Authorized Inspector</E> means an Inspector who is currently commissioned by the National Board of Boiler and Pressure Vessel Inspectors and employed as an Inspector by an Authorized Inspection Agency.</P> <P> <E T="03">Bag</E> means a flexible packaging made of paper, plastic film, textiles, woven material or other similar materials.</P> <P> <E T="03">Bar</E> means 1 BAR = 100 kPa (14.5 psi).</P> <P> <E T="03">Barge</E> means a non-selfpropelled vessel.</P> <P> <E T="03">Biological product.</E> See § 173.134 of this subchapter.</P> <P> <E T="03">Biological substances, Category B.</E> See § 173.134 of this subchapter.<PRTPAGE P="95"/> </P> <P> <E T="03">Bottle</E> means an inner packaging having a neck of relatively smaller cross section than the body and an opening capable of holding a closure for retention of the contents.</P> <P> <E T="03">Bottom shell</E> means that portion of a tank car tank surface, excluding the head ends of the tank car tank, that lies within two feet, measured circumferentially, of the bottom longitudinal center line of the tank car tank.</P> <P> <E T="03">Box</E> means a packaging with complete rectangular or polygonal faces, made of metal, wood, plywood, reconstituted wood, fiberboard, plastic, or other suitable material. Holes appropriate to the size and use of the packaging, for purposes such as ease of handling or opening, or to meet classification requirements, are permitted as long as they do not compromise the integrity of the packaging during transportation, and are not otherwise prohibited in this subchapter.</P> <P> <E T="03">Break-bulk</E> means packages of hazardous materials that are handled individually, palletized, or unitized for purposes of transportation as opposed to bulk and containerized freight.</P> <P> <E T="03">Btu</E> means British thermal unit.</P> <P> <E T="03">Bulk packaging</E> means a packaging, other than a vessel or a barge, including a transport vehicle or freight container, in which hazardous materials are loaded with no intermediate form of containment. A Large Packaging in which hazardous materials are loaded with an intermediate form of containment, such as one or more articles or inner packagings, is also a bulk packaging. Additionally, a bulk packaging has: * * *</P> <P>(1) A maximum capacity greater than 450 L (119 gallons) as a receptacle for a liquid;</P> <P>(2) A maximum net mass greater than 400 kg (882 pounds) and a maximum capacity greater than 450 L (119 gallons) as a receptacle for a solid; or</P> <P>(3) A water capacity greater than 454 kg (1000 pounds) as a receptacle for a gas as defined in § 173.115 of this subchapter.</P> <P> <E T="03">Bundle of cylinders</E> means assemblies of UN cylinders fastened together and interconnected by a manifold and transported as a unit. The total water capacity for the bundle may not exceed 3,000 L, except that a bundle intended for the transport of gases in Division 2.3 is limited to a water capacity of 1,000 L.</P> <P> <E T="03">Bureau of Explosives</E> means the Bureau of Explosives (B of E) of the Association of American Railroads.</P> <P> <E T="03">C</E> means Celsius or Centigrade.</P> <P> <E T="03">Captain of the Port (COTP)</E> means the officer of the Coast Guard, under the command of a District Commander, so designated by the Commandant for the purpose of giving immediate direction to Coast Guard law enforcement activities within an assigned area. As used in this subchapter, the term <E T="03">Captain of the Port</E> includes an authorized representative of the Captain of the Port.</P> <P> <E T="03">Carfloat</E> means a vessel that operates on a short run on an irregular basis and serves one or more points in a port area as an extension of a rail line or highway over water, and does not operate in ocean, coastwise, or ferry service.</P> <P> <E T="03">Cargo aircraft only</E> means an aircraft that is used to transport cargo and is not engaged in carrying passengers. For purposes of this subchapter, the terms <E T="03">cargo aircraft only, cargo-only aircraft</E> and <E T="03">cargo aircraft</E> have the same meaning.</P> <P> <E T="03">Cargo tank</E> means a bulk packaging that:</P> <P>(1) Is a tank intended primarily for the carriage of liquids or gases and includes appurtenances, reinforcements, fittings, and closures (for the definition of a tank, <E T="03">see</E> 49 CFR 178.320, 178.337-1, or 178.338-1, as applicable);</P> <P>(2) Is permanently attached to or forms a part of a motor vehicle, or is not permanently attached to a motor vehicle but which, by reason of its size, construction or attachment to a motor vehicle is loaded or unloaded without being removed from the motor vehicle; and</P> <P>(3) Is not fabricated under a specification for cylinders, intermediate bulk containers, multi-unit tank car tanks, portable tanks, or tank cars.</P> <P> <E T="03">Cargo tank motor vehicle</E> means a motor vehicle with one or more cargo tanks permanently attached to or forming an integral part of the motor vehicle.</P> <P> <E T="03">Cargo vessel</E> means: (1) Any vessel other than a passenger vessel; and<PRTPAGE P="96"/> </P> <P>(2) Any ferry being operated under authority of a change of character certificate issued by a Coast Guard Officer-in-Charge, Marine Inspection.</P> <P> <E T="03">Carrier</E> means a person who transports passengers or property in commerce by rail car, aircraft, motor vehicle, or vessel.</P> <P> <E T="03">CC</E> means closed-cup.</P> <P> <E T="03">Character of vessel</E> means the type of service in which the vessel is engaged at the time of carriage of a hazardous material.</P> <P> <E T="03">Class</E> means hazard class. See <E T="03">hazard class.</E> </P> <P> <E T="03">Class 1.</E> See § 173.50 of this subchapter.</P> <P> <E T="03">Class 2.</E> See § 173.115 of this subchapter.</P> <P> <E T="03">Class 3.</E> See § 173.120 of this subchapter.</P> <P> <E T="03">Class 4.</E> See § 173.124 of this subchapter.</P> <P> <E T="03">Class 5.</E> See § 173.128 of this subchapter.</P> <P> <E T="03">Class 6.</E> See § 173.132 of this subchapter.</P> <P> <E T="03">Class 7.</E> See § 173.403 of this subchapter.</P> <P> <E T="03">Class 8.</E> See § 173.136 of this subchapter.</P> <P> <E T="03">Class 9.</E> See § 173.140 of this subchapter.</P> <P> <E T="03">Closure</E> means a device which closes an opening in a receptacle.</P> <P> <E T="03">COFC</E> means container-on-flat-car.</P> <P> <E T="03">Combination packaging</E> means a combination of packaging, for transport purposes, consisting of one or more inner packagings secured in a non-bulk outer packaging. It does not include a composite packaging.</P> <P> <E T="03">Combustible liquid.</E> See § 173.120 of this subchapter.</P> <P> <E T="03">Commerce</E> means trade or transportation in the jurisdiction of the United States within a single state; between a place in a state and a place outside of the state; that affects trade or transportation between a place in a state and place outside of the state; or on a United States-registered aircraft.</P> <P> <E T="03">Compatibility group letter</E> means a designated alphabetical letter used to categorize different types of explosive substances and articles for purposes of stowage and segregation. See § 173.52 of this subchapter.</P> <P> <E T="03">Competent Authority</E> means a national agency responsible under its national law for the control or regulation of a particular aspect of the transportation of hazardous materials (dangerous goods). The term <E T="03">Appropriate Authority,</E> as used in the ICAO Technical Instructions (IBR, see § 171.7), has the same meaning as <E T="03">Competent Authority.</E> For purposes of this subchapter, the Associate Administrator is the Competent Authority for the United States.</P> <P> <E T="03">Composite packaging</E> means a packaging consisting of an outer packaging and an inner receptacle, so constructed that the inner receptacle and the outer packaging form an integral packaging. Once assembled it remains thereafter an integrated single unit; it is filled, stored, shipped and emptied as such.</P> <P> <E T="03">Compressed gas.</E> See § 173.115 of this subchapter.</P> <P> <E T="03">Consignee</E> means the person or place shown on a shipping document, package marking, or other media as the location to which a carrier is directed to transport a hazardous material.</P> <P> <E T="03">Consumer commodity</E> means a material that is packaged and distributed in a form intended or suitable for sale through retail sales agencies or instrumentalities for consumption by individuals for purposes of personal care or household use. This term also includes drugs and medicines.</P> <P> <E T="03">Containership</E> means a cargo vessel designed and constructed to transport, within specifically designed cells, portable tanks and freight containers which are lifted on and off with their contents intact.</P> <P> <E T="03">Corrosive material.</E> See § 173.136 of this subchapter.</P> <P> <E T="03">Crate</E> means an outer packaging with incomplete surfaces.</P> <P> <E T="03">Crewmember</E> means a person assigned to perform duty in an aircraft during flight time.</P> <P> <E T="03">Cryogenic liquid.</E> See § 173.115(g) of this subchapter.</P> <P> <E T="03">Cultures and stocks.</E> See § 173.134 of this subchapter.</P> <P> <E T="03">Cylinder</E> means a pressure vessel designed for pressures higher than 40 psia and having a circular cross section. It does not include a portable tank, multi-unit tank car tank, cargo tank, or tank car.</P> <P> <E T="03">Dangerous when wet material.</E> See § 173.124 of this subchapter.<PRTPAGE P="97"/> </P> <P> <E T="03">Design Certifying Engineer</E> means a person registered with the Department in accordance with subpart F of part 107 of this chapter who has the knowledge and ability to perform stress analysis of pressure vessels and otherwise determine whether a cargo tank design and construction meets the applicable DOT specification. A <E T="03">Design Certifying Engineer</E> meets the knowledge and ability requirements of this section by meeting any one of the following requirements:</P> <P>(1) Has an engineering degree and one year of work experience in cargo tank structural or mechanical design;</P> <P>(2) Is currently registered as a professional engineer by appropriate authority of a state of the United States or a province of Canada; or</P> <P>(3) Has at least three years' experience in performing the duties of a Design Certifying Engineer prior to September 1, 1991.</P> <P> <E T="03">Designated facility</E> means a hazardous waste treatment, storage, or disposal facility that has been designated on the manifest by the generator.</P> <P> <E T="03">District Commander</E> means the District Commander of the Coast Guard, or his authorized representative, who has jurisdiction in the particular geographical area.</P> <P> <E T="03">Division</E> means a subdivision of a hazard class.</P> <P> <E T="03">DOD</E> means the U.S. Department of Defense.</P> <P> <E T="03">Domestic transportation</E> means transportation between places within the United States other than through a foreign country.</P> <P> <E T="03">DOT</E> or <E T="03">Department</E> means U.S. Department of Transportation.</P> <P> <E T="03">Drum</E> means a flat-ended or convex-ended cylindrical packaging made of metal, fiberboard, plastic, plywood, or other suitable materials. This definition also includes packagings of other shapes made of metal or plastic (e.g., round taper-necked packagings or pail-shaped packagings) but does not include cylinders, jerricans, wooden barrels or bulk packagings.</P> <P> <E T="03">Elevated temperature material</E> means a material which, when offered for transportation or transported in a bulk packaging:</P> <P>(1) Is in a liquid phase and at a temperature at or above 100 °C (212 °F);</P> <P>(2) Is in a liquid phase with a flash point at or above 38 °C (100 °F) that is intentionally heated and offered for transportation or transported at or above its flash point; or</P> <P>(3) Is in a solid phase and at a temperature at or above 240 °C (464 °F).</P> <P> <E T="03">Engine</E> means a locomotive propelled by any form of energy and used by a railroad.</P> <P> <E T="03">EPA</E> means U.S. Environmental Protection Agency.</P> <P> <E T="03">Equivalent lithium content</E> means, for a lithium-ion cell, the product of the rated capacity, in ampere-hours, of a lithium-ion cell times 0.3, with the result expressed in grams. The equivalent lithium content of a battery equals the sum of the grams of equivalent lithium content contained in the component cells of the battery.</P> <P> <E T="03">Etiologic agent.</E> See § 173.134 of this subchapter.</P> <P> <E T="03">EX number</E> means a number preceded by the prefix “EX”, assigned by the Associate Administrator, to an item that has been evaluated under the provisions of § 173.56 of this subchapter.</P> <P> <E T="03">Explosive.</E> See § 173.50 of this subchapter.</P> <P> <E T="03">F</E> means degree Fahrenheit.</P> <P> <E T="03">Farmer</E> means a person engaged in the production or raising of crops, poultry, or livestock.</P> <P> <E T="03">Federal hazardous material transportation law</E> means 49 U.S.C. 5101 <E T="03">et seq.</E> </P> <P> <E T="03">Ferry vessel</E> means a vessel which is limited in its use to the carriage of deck passengers or vehicles or both, operates on a short run on a frequent schedule between two points over the most direct water route, other than in ocean or coastwise service, and is offered as a public service of a type normally attributed to a bridge or tunnel.</P> <P> <E T="03">Filling density</E> has the following meanings:</P> <P>(1) For compressed gases in cylinders, see § 173.304a(a)(2) table note 1.</P> <P>(2) For compressed gases in tank cars, see § 173.314(c) table note 1.</P> <P>(3) For compressed gases in cargo tanks and portable tanks, see § 173.315(a) table note 1.</P> <P>(4) For cryogenic liquids in cylinders, except hydrogen, see § 173.316(c)(1).</P> <P>(5) For hydrogen, cryogenic liquid in cylinders, see § 173.316(c)(3) table note 1.<PRTPAGE P="98"/> </P> <P>(6) For cryogenic liquids in cargo tanks, see § 173.318(f)(1).</P> <P>(7) For cryogenic liquids in tank cars, see § 173.319(d)(1).</P> <P> <E T="03">Flammable gas.</E> See § 173.115 of this subchapter.</P> <P> <E T="03">Flammable liquid.</E> See § 173.120 of this subchapter.</P> <P> <E T="03">Flammable solid.</E> See § 173.124 of this subchapter.</P> <P> <E T="03">Flash point.</E> See § 173.120 of this subchapter.</P> <P> <E T="03">Freight container</E> means a reusable container having a volume of 64 cubic feet or more, designed and constructed to permit being lifted with its contents intact and intended primarily for containment of packages (in unit form) during transportation.</P> <P> <E T="03">Fuel cell</E> means an electrochemical device that converts the energy of the chemical reaction between a fuel, such as hydrogen or hydrogen rich gases, alcohols, or hydrocarbons, and an oxidant, such as air or oxygen, to direct current (d.c.) power, heat, and other reaction products.</P> <P> <E T="03">Fuel cell cartridge or fuel cartridge</E> means an article that stores fuel for discharge into the fuel cell through a valve(s) that controls the discharge of fuel into the fuel cell.</P> <P> <E T="03">Fuel cell system</E> means a fuel cell with an installed fuel cell cartridge together with wiring, valves, and other attachments that connect the fuel cell or cartridge to the device it powers. The fuel cell or cartridge may be so constructed that it forms an integral part of the device or may be removed and connected manually to the device.</P> <P> <E T="03">Fuel tank</E> means a tank other than a cargo tank, used to transport flammable or combustible liquid, or compressed gas for the purpose of supplying fuel for propulsion of the transport vehicle to which it is attached, or for the operation of other equipment on the transport vehicle.</P> <P> <E T="03">Fumigated lading.</E> See §§ 172.302(g) and 173.9.</P> <P> <E T="03">Gas</E> means a material which has a vapor pressure greater than 300 kPa (43.5 psia) at 50 °C (122 °F) or is completely gaseous at 20 °C (68 °F) at a standard pressure of 101.3 kPa (14.7 psia).</P> <P> <E T="03">Gross weight</E> or <E T="03">Gross mass</E> means the weight of a packaging plus the weight of its contents.</P> <P> <E T="03">Hazard class</E> means the category of hazard assigned to a hazardous material under the definitional criteria of part 173 of this subchapter and the provisions of the § 172.101 table. A material may meet the defining criteria for more than one hazard class but is assigned to only one hazard class.</P> <P> <E T="03">Hazard zone</E> means one of four levels of hazard (Hazard Zones A through D) assigned to gases, as specified in § 173.116(a) of this subchapter, and one of two levels of hazards (Hazard Zones A and B) assigned to liquids that are poisonous by inhalation, as specified in § 173.133(a) of this subchapter. A hazard zone is based on the LC50 value for acute inhalation toxicity of gases and vapors, as specified in § 173.133(a).</P> <P> <E T="03">Hazardous material</E> means a substance or material that the Secretary of Transportation has determined is capable of posing an unreasonable risk to health, safety, and property when transported in commerce, and has designated as hazardous under section 5103 of Federal hazardous materials transportation law (49 U.S.C. 5103). The term includes hazardous substances, hazardous wastes, marine pollutants, elevated temperature materials, materials designated as hazardous in the Hazardous Materials Table (see 49 CFR 172.101), and materials that meet the defining criteria for hazard classes and divisions in part 173 of subchapter C of this chapter.</P> <P> <E T="03">Hazardous substance</E> for the purposes of this subchapter, means a material, including its mixtures and solutions, that—</P> <P>(1) Is listed in the appendix A to § 172.101 of this subchapter;</P> <P>(2) Is in a quantity, in one package, which equals or exceeds the reportable quantity (RQ) listed in the appendix A to § 172.101 of this subchapter; and</P> <P>(3) When in a mixture or solution—</P> <P>(i) For radionuclides, conforms to paragraph 7 of the appendix A to § 172.101.</P> <P>(ii) For other than radionuclides, is in a concentration by weight which equals or exceeds the concentration corresponding to the RQ of the material, as shown in the following table:<PRTPAGE P="99"/> </P> <GPOTABLE CDEF="s20,8,8" COLS="3" OPTS="L2"> <BOXHD> <CHED H="1">RQ pounds (kilograms)</CHED> <CHED H="1">Concentration by weight</CHED> <CHED H="2">Percent</CHED> <CHED H="2">PPM</CHED> </BOXHD> <ROW> <ENT I="01">5000 (2270)</ENT> <ENT>10</ENT> <ENT>100,000</ENT> </ROW> <ROW> <ENT I="01">1000 (454)</ENT> <ENT>2</ENT> <ENT>20,000</ENT> </ROW> <ROW> <ENT I="01">100 (45.4)</ENT> <ENT>0.2</ENT> <ENT>2,000</ENT> </ROW> <ROW> <ENT I="01">10 (4.54)</ENT> <ENT>0.02</ENT> <ENT>200</ENT> </ROW> <ROW> <ENT I="01">1 (0.454)</ENT> <ENT>0.002</ENT> <ENT>20</ENT> </ROW> </GPOTABLE> <P>The term does not include petroleum, including crude oil or any fraction thereof which is not otherwise specifically listed or designated as a hazardous substance in appendix A to § 172.101 of this subchapter, and the term does not include natural gas, natural gas liquids, liquefied natural gas, or synthetic gas usable for fuel (or mixtures of natural gas and such synthetic gas).</P> <P> <E T="03">Hazardous waste,</E> for the purposes of this chapter, means any material that is subject to the Hazardous Waste Manifest Requirements of the U.S. Environmental Protection Agency specified in 40 CFR part 262.</P> <P> <E T="03">Hazmat</E> means a hazardous material.</P> <P> <E T="03">Hazmat employee</E> means: (1) A person who is:</P> <P>(i) Employed on a full-time, part time, or temporary basis by a hazmat employer and who in the course of such full time, part time or temporary employment directly affects hazardous materials transportation safety;</P> <P>(ii) Self-employed (including an owner-operator of a motor vehicle, vessel, or aircraft) transporting hazardous materials in commerce who in the course of such self-employment directly affects hazardous materials transportation safety;</P> <P>(iii) A railroad signalman; or</P> <P>(iv) A railroad maintenance-of-way employee.</P> <P>(2) This term includes an individual, employed on a full time, part time, or temporary basis by a hazmat employer, or who is self-employed, who during the course of employment:</P> <P>(i) Loads, unloads, or handles hazardous materials;</P> <P>(ii) Designs, manufactures, fabricates, inspects, marks, maintains, reconditions, repairs, or tests a package, container or packaging component that is represented, marked, certified, or sold as qualified for use in transporting hazardous material in commerce.</P> <P>(iii) Prepares hazardous materials for transportation;</P> <P>(iv) Is responsible for safety of transporting hazardous materials;</P> <P>(v) Operates a vehicle used to transport hazardous materials.</P> <P> <E T="03">Hazmat employer</E> means:</P> <P>(1) A person who employs or uses at least one hazmat employee on a full-time, part time, or temporary basis; and who:</P> <P>(i) Transports hazardous materials in commerce;</P> <P>(ii) Causes hazardous materials to be transported in commerce; or</P> <P>(iii) Designs, manufactures, fabricates, inspects, marks, maintains, reconditions, repairs or tests a package, container, or packaging component that is represented, marked, certified, or sold by that person as qualified for use in transporting hazardous materials in commerce;</P> <P>(2) A person who is self-employed (including an owner-operator of a motor vehicle, vessel, or aircraft) transporting materials in commerce; and who:</P> <P>(i) Transports hazardous materials in commerce;</P> <P>(ii) Causes hazardous materials to be transported in commerce; or</P> <P>(iii) Designs, manufactures, fabricates, inspects, marks, maintains, reconditions, repairs or tests a package, container, or packaging component that is represented, marked, certified, or sold by that person as qualified for use in transporting hazardous materials in commerce; or</P> <P>(3) A department, agency, or instrumentality of the United States Government, or an authority of a State, political subdivision of a State, or an Indian tribe; and who:</P> <P>(i) Transports hazardous materials in commerce;</P> <P>(ii) Causes hazardous materials to be transported in commerce; or</P> <P>(iii) Designs, manufactures, fabricates, inspects, marks, maintains, reconditions, repairs or tests a package, container, or packaging component that is represented, marked, certified, or sold by that person as qualified for use in transporting hazardous materials in commerce.<PRTPAGE P="100"/> </P> <P> <E T="03">Hermetically sealed</E> means closed by fusion, gasketing, crimping, or equivalent means so that no gas or vapor can enter or escape.</P> <P> <E T="03">Household waste</E> means any solid waste (including garbage, trash, and sanitary waste from septic tanks) derived from households (including single and multiple residences, hotels and motels, bunkhouses, ranger stations, crew quarters, campgrounds, picnic grounds, and day-use recreation areas). This term is not applicable to consolidated shipments of household hazardous materials transported from collection centers. A collection center is a central location where household waste is collected.</P> <P> <E T="03">HMR</E> means the Hazardous Materials Regulations, Parts 171 through 180 of this chapter.</P> <P> <E T="03">IAEA</E> means International Atomic Energy Agency.</P> <P> <E T="03">IATA</E> means International Air Transport Association.</P> <P> <E T="03">ICAO</E> means International Civil Aviation Organization.</P> <P> <E T="03">IMO</E> means International Maritime Organization.</P> <P> <E T="03">Incorporated by reference</E> or <E T="03">IBR</E> means a publication or a portion of a publication that is made a part of the regulations of this subchapter. See § 171.7.</P> <P> <E T="03">Infectious substance (etiologic agent).</E> See § 173.134 of this subchapter.</P> <P> <E T="03">Inner packaging</E> means a packaging for which an outer packaging is required for transport. It does not include the inner receptacle of a composite packaging.</P> <P> <E T="03">Inner receptacle</E> means a receptacle which requires an outer packaging in order to perform its containment function. The inner receptacle may be an inner packaging of a combination packaging or the inner receptacle of a composite packaging.</P> <P> <E T="03">Intermediate bulk container</E> or <E T="03">IBC</E> means a rigid or flexible portable packaging, other than a cylinder or portable tank, which is designed for mechanical handling. Standards for IBCs manufactured in the United States are set forth in subparts N and O of part 178 of this subchapter.</P> <P> <E T="03">Intermediate packaging</E> means a packaging which encloses an inner packaging or article and is itself enclosed in an outer packaging.</P> <P> <E T="03">Intermodal container</E> means a freight container designed and constructed to permit it to be used interchangeably in two or more modes of transport.</P> <P> <E T="03">Intermodal portable tank</E> or <E T="03">IM portable tank</E> means a specific class of portable tanks designed primarily for international intermodal use.</P> <P> <E T="03">International transportation</E> means transportation—</P> <P>(1) Between any place in the United States and any place in a foreign country;</P> <P>(2) Between places in the United States through a foreign country; or</P> <P>(3) Between places in one or more foreign countries through the United States.</P> <P> <E T="03">Irritating material.</E> See § 173.132(a)(2) of this subchapter.</P> <P> <E T="03">Jerrican</E> means a metal or plastic packaging of rectangular or polygonal cross-section.</P> <P> <E T="03">Large packaging</E> means a packaging that—</P> <P>(1) Consists of an outer packaging that contains articles or inner packagings;</P> <P>(2) Is designated for mechanical handling;</P> <P>(3) Exceeds 400 kg net mass or 450 liters (118.9 gallons) capacity;</P> <P>(4) Has a volume of not more than 3 cubic meters (m<SU>3</SU>) (see § 178.801(i) of this subchapter); and</P> <P>(5) Conforms to the requirements for the construction, testing and marking of Large Packagings as specified in subparts P and Q of part 178 of this subchapter.</P> <P> <E T="03">Limited quantity,</E> when specified as such in a section applicable to a particular material, means the maximum amount of a hazardous material for which there is a specific labeling or packaging exception.</P> <P> <E T="03">Lighter</E> means a mechanically operated flame-producing device employing an ignition device and containing a Class 3 or a Division 2.1 material. For design, capacity, and filling density requirements for lighters containing a Division 2.1 material, see § 173.308.</P> <P> <E T="03">Lighter refill</E> means a pressurized container that does not contain an ignition device but does contain a release <PRTPAGE P="101"/>device and is intended for use as a replacement cartridge in a lighter or to refill a lighter with a Division 2.1 flammable gas fuel. For capacity limits, see § 173.306(h) of this subchapter.</P> <P> <E T="03">Liquid</E> means a material, other than an elevated temperature material, with a melting point or initial melting point of 20 °C (68 °F) or lower at a standard pressure of 101.3 kPa (14.7 psia). A viscous material for which a specific melting point cannot be determined must be subjected to the procedures specified in ASTM D 4359 “Standard Test Method for Determining Whether a Material is Liquid or Solid” (IBR, see § 171.7).</P> <P> <E T="03">Liquid phase</E> means a material that meets the definition of liquid when evaluated at the higher of the temperature at which it is offered for transportation or at which it is transported, not at the 38 °C (100 °F) temperature specified in ASTM D 4359 (IBR, see § 171.7).</P> <P> <E T="03">Lithium content</E> means the mass of lithium in the anode of a lithium metal or lithium alloy cell. The lithium content of a battery equals the sum of the grams of lithium content contained in the component cells of the battery. For a lithium-ion cell see the definition for “equivalent lithium content”.</P> <P> <E T="03">Loading incidental to movement</E> means loading by carrier personnel or in the presence of carrier personnel of packaged or containerized hazardous material onto a transport vehicle, aircraft, or vessel for the purpose of transporting it, including the loading, blocking and bracing a hazardous materials package in a freight container or transport vehicle, and segregating a hazardous materials package in a freight container or transport vehicle from incompatible cargo. For a bulk packaging, <E T="03">loading incidental to movement</E> means filling the packaging with a hazardous material for the purpose of transporting it. <E T="03">Loading incidental to movement</E> includes transloading.</P> <P> <E T="03">Magazine vessel</E> means a vessel used for the receiving, storing, or dispensing of explosives.</P> <P> <E T="03">Magnetic material.</E> See § 173.21(d) of this subchapter.</P> <P> <E T="03">Marine pollutant,</E> means a material which is listed in appendix B to § 172.101 of this subchapter (also see § 171.4) and, when in a solution or mixture of one or more marine pollutants, is packaged in a concentration which equals or exceeds:</P> <P>(1) Ten percent by weight of the solution or mixture for materials listed in the appendix; or</P> <P>(2) One percent by weight of the solution or mixture for materials that are identified as severe marine pollutants in the appendix.</P> <P> <E T="03">Marking</E> means a descriptive name, identification number, instructions, cautions, weight, specification, or UN marks, or combinations thereof, required by this subchapter on outer packagings of hazardous materials.</P> <P> <E T="03">Material of trade</E> means a hazardous material, other than a hazardous waste, that is carried on a motor vehicle—</P> <P>(1) For the purpose of protecting the health and safety of the motor vehicle operator or passengers;</P> <P>(2) For the purpose of supporting the operation or maintenance of a motor vehicle (including its auxiliary equipment); or</P> <P>(3) By a private motor carrier (including vehicles operated by a rail carrier) in direct support of a principal business that is other than transportation by motor vehicle.</P> <P> <E T="03">Material poisonous by inhalation</E> or <E T="03">Material toxic by inhalation</E> means:</P> <P>(1) A gas meeting the defining criteria in § 173.115(c) of this subchapter and assigned to Hazard Zone A, B, C, or D in accordance with § 173.116(a) of this subchapter;</P> <P>(2) A liquid (other than as a mist) meeting the defining criteria in § 173.132(a)(1)(iii) of this subchapter and assigned to Hazard Zone A or B in accordance with § 173.133(a) of this subchapter; or</P> <P>(3) Any material identified as an inhalation hazard by a special provision in column 7 of the § 172.101 table.</P> <P> <E T="03">Maximum allowable working pressure</E> or <E T="03">MAWP:</E> For DOT specification cargo tanks used to transport liquid hazardous materials, <E T="03">see</E> § 178.320(a) of this subchapter.</P> <P> <E T="03">Maximum capacity</E> means the maximum inner volume of receptacles or packagings.</P> <P> <E T="03">Maximum net mass</E> means the allowable maximum net mass of contents in <PRTPAGE P="102"/>a single packaging, or as used in subpart M of part 178 of this subchapter, the maximum combined mass of inner packaging, and the contents thereof.</P> <P> <E T="03">Mechanical displacement meter prover</E> means a mechanical device used in the oilfield service industry consisting of a pipe assembly that is used to calibrate the accuracy and performance of meters that measure the quantities of a product being pumped or transferred at facilities such as drilling locations, refineries, tank farms, and loading racks.</P> <P> <E T="03">Metered delivery service</E> means a cargo tank unloading operation conducted at a metered flow rate of 378.5 L (100 gallons) per minute or less through an attached delivery hose with a nominal inside diameter of 3.175 cm (1<FR>1/4</FR> inches) or less.</P> <P> <E T="03">Miscellaneous hazardous material.</E> See § 173.140 of this subchapter.</P> <P> <E T="03">Mixture</E> means a material composed of more than one chemical compound or element.</P> <P> <E T="03">Mode</E> means any of the following transportation methods; rail, highway, air, or water.</P> <P> <E T="03">Motor vehicle</E> includes a vehicle, machine, tractor, trailer, or semitrailer, or any combination thereof, propelled or drawn by mechanical power and used upon the highways in the transportation of passengers or property. It does not include a vehicle, locomotive, or car operated exclusively on a rail or rails, or a trolley bus operated by electric power derived from a fixed overhead wire, furnishing local passenger transportation similar to street-railway service.</P> <P> <E T="03">Movement</E> means the physical transfer of a hazardous material from one geographic location to another by rail car, aircraft, motor vehicle, or vessel.</P> <P> <E T="03">Multiple-element gas container or MEGC</E> means assemblies of UN cylinders, tubes, or bundles of cylinders interconnected by a manifold and assembled within a framework. The term includes all service equipment and structural equipment necessary for the transport of gases.</P> <P> <E T="03">Name of contents</E> means the proper shipping name as specified in § 172.101 of this subchapter.</P> <P> <E T="03">Navigable waters</E> means, for the purposes of this subchapter, waters of the United States, including the territorial seas.</P> <P> <E T="03">Non-bulk packaging</E> means a packaging which has:</P> <P>(1) A maximum capacity of 450 L (119 gallons) or less as a receptacle for a liquid;</P> <P>(2) A maximum net mass of 400 kg (882 pounds) or less and a maximum capacity of 450 L (119 gallons) or less as a receptacle for a solid; or</P> <P>(3) A water capacity of 454 kg (1000 pounds) or less as a receptacle for a gas as defined in § 173.115 of this subchapter.</P> <P> <E T="03">Nonflammable gas.</E> See § 173.115 of this subchapter.</P> <P> <E T="03">N.O.S.</E> means not otherwise specified.</P> <P> <E T="03">N.O.S. description</E> means a shipping description from the § 172.101 table which includes the abbreviation <E T="03">n.o.s.</E> </P> <P> <E T="03">NPT</E> means an American Standard taper pipe thread conforming to the requirements of NBS Handbook H-28 (IBR, see § 171.7).</P> <P> <E T="03">NRC (non-reusable container)</E> means a packaging (container) whose reuse is restricted in accordance with the provisions of § 173.28 of this subchapter.</P> <P> <E T="03">Occupied caboose</E> means a rail car being used to transport non-passenger personnel.</P> <P> <E T="03">Officer in Charge, Marine Inspection</E> means a person from the civilian or military branch of the Coast Guard designated as such by the Commandant and who under the supervision and direction of the Coast Guard District Commander is in charge of a designated inspection zone for the performance of duties with respect to the enforcement and administration of title 52, Revised Statutes, acts amendatory thereof or supplemental thereto, rules and regulations thereunder, and the inspection required thereby.</P> <P> <E T="03">Offshore supply vessel</E> means a cargo vessel of less than 500 gross tons that regularly transports goods, supplies or equipment in support of exploration or production of offshore mineral or energy resources.</P> <P> <E T="03">Operator</E> means a person who controls the use of an aircraft, vessel, or vehicle.</P> <P> <E T="03">Organic peroxide.</E> See § 173.128 of this subchapter.</P> <P> <E T="03">ORM</E> means other regulated material. See § 173.144 of this subchapter.<PRTPAGE P="103"/> </P> <P> <E T="03">Outage</E> or <E T="03">ullage</E> means the amount by which a packaging falls short of being liquid full, usually expressed in percent by volume.</P> <P> <E T="03">Outer packaging</E> means the outermost enclosure of a composite or combination packaging together with any absorbent materials, cushioning and any other components necessary to contain and protect inner receptacles or inner packagings.</P> <P> <E T="03">Overpack,</E> except as provided in subpart K of part 178 of this subchapter, means an enclosure that is used by a single consignor to provide protection or convenience in handling of a package or to consolidate two or more packages. <E T="03">Overpack</E> does not include a transport vehicle, freight container, or aircraft unit load device. Examples of overpacks are one or more packages:</P> <P>(1) Placed or stacked onto a load board such as a pallet and secured by strapping, shrink wrapping, stretch wrapping, or other suitable means; or</P> <P>(2) Placed in a protective outer packaging such as a box or crate.</P> <P> <E T="03">Oxidizer.</E> See § 173.127 of this subchapter.</P> <P> <E T="03">Oxidizing gas</E> means a gas which may, generally by providing oxygen, cause or contribute to the combustion of other material more than air does.</P> <P> <E T="03">Oxygen generator (chemical)</E> means a device containing chemicals that upon activation release oxygen as a product of chemical reaction.</P> <P> <E T="03">Package</E> or <E T="03">Outside Package</E> means a packaging plus its contents. For radioactive materials, see § 173.403 of this subchapter.</P> <P> <E T="03">Packaging</E> means a receptacle and any other components or materials necessary for the receptacle to perform its containment function in conformance with the minimum packing requirements of this subchapter. For radioactive materials packaging, see § 173.403 of this subchapter.</P> <P> <E T="03">Packing group</E> means a grouping according to the degree of danger presented by hazardous materials. Packing Group I indicates great danger; Packing Group II, medium danger; Packing Group III, minor danger. See § 172.101(f) of this subchapter.</P> <P> <E T="03">Passenger</E> (With respect to vessels and for the purposes of part 176 only) means a person being carried on a vessel other than:</P> <P>(1) The owner or his representative;</P> <P>(2) The operator;</P> <P>(3) A bona fide member of the crew engaged in the business of the vessel who has contributed no consideration for his carriage and who is paid for his services; or</P> <P>(4) A guest who has not contributed any consideration directly or indirectly for his carriage.</P> <P> <E T="03">Passenger-carrying aircraft</E> means an aircraft that carries any person other than a crewmember, company employee, an authorized representative of the United States, or a person accompanying the shipment.</P> <P> <E T="03">Passenger vessel</E> means—</P> <P>(1) A vessel subject to any of the requirements of the International Convention for the Safety of Life at Sea, 1974, which carries more than 12 passengers;</P> <P>(2) A cargo vessel documented under the laws of the United States and not subject to that Convention, which carries more than 16 passengers;</P> <P>(3) A cargo vessel of any foreign nation that extends reciprocal privileges and is not subject to that Convention and which carries more than 16 passengers; and</P> <P>(4) A vessel engaged in a ferry operation and which carries passengers.</P> <P> <E T="03">Person</E> means an individual, corporation, company, association, firm, partnership, society, joint stock company; or a government, Indian tribe, or authority of a government or tribe offering a hazardous material for transportation in commerce or transporting a hazardous material to support a commercial enterprise. This term does not include the United States Postal Service or, for purposes of 49 U.S.C. 5123 and 5124, a Department, agency, or instrumentality of the government.</P> <P> <E T="03">Person who offers</E> or <E T="03">offeror</E> means:</P> <P>(1) Any person who does either or both of the following:</P> <P>(i) Performs, or is responsible for performing, any pre-transportation function required under this subchapter for transportation of the hazardous material in commerce.</P> <P>(ii) Tenders or makes the hazardous material available to a carrier for transportation in commerce.<PRTPAGE P="104"/> </P> <P>(2) A carrier is not an offeror when it performs a function required by this subchapter as a condition of acceptance of a hazardous material for transportation in commerce (<E T="03">e.g.</E>, reviewing shipping papers, examining packages to ensure that they are in conformance with this subchapter, or preparing shipping documentation for its own use) or when it transfers a hazardous material to another carrier for continued transportation in commerce without performing a pre-transportation function.</P> <P> <E T="03">PHMSA</E> means the Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, Washington, DC 20590.</P> <P> <E T="03">Placarded car</E> means a rail car which is placarded in accordance with the requirements of part 172 of this subchapter.</P> <P> <E T="03">Poisonous gas.</E> See § 173.115 of this subchapter.</P> <P> <E T="03">Poisonous materials.</E> See § 173.132 of this subchapter.</P> <P> <E T="03">Portable tank</E> means a bulk packaging (except a cylinder having a water capacity of 1000 pounds or less) designed primarily to be loaded onto, or on, or temporarily attached to a transport vehicle or ship and equipped with skids, mountings, or accessories to facilitate handling of the tank by mechanical means. It does not include a cargo tank, tank car, multi-unit tank car tank, or trailer carrying 3AX, 3AAX, or 3T cylinders.</P> <P> <E T="03">Preferred route</E> or <E T="03">Preferred highway</E> is a highway for shipment of <E T="03">highway route controlled quantities</E> of radioactive materials so designated by a State routing agency, and any Interstate System highway for which an alternative highway has not been designated by such State agency as provided by § 397.103 of this title.</P> <P> <E T="03">Pre-transportation function</E> means a function specified in the HMR that is required to assure the safe transportation of a hazardous material in commerce, including—</P> <P>(1) Determining the hazard class of a hazardous material.</P> <P>(2) Selecting a hazardous materials packaging.</P> <P>(3) Filling a hazardous materials packaging, including a bulk packaging.</P> <P>(4) Securing a closure on a filled or partially filled hazardous materials package or container or on a package or container containing a residue of a hazardous material.</P> <P>(5) Marking a package to indicate that it contains a hazardous material.</P> <P>(6) Labeling a package to indicate that it contains a hazardous material.</P> <P>(7) Preparing a shipping paper.</P> <P>(8) Providing and maintaining emergency response information.</P> <P>(9) Reviewing a shipping paper to verify compliance with the HMR or international equivalents.</P> <P>(10) For each person importing a hazardous material into the United States, providing the shipper with timely and complete information as to the HMR requirements that will apply to the transportation of the material within the United States.</P> <P>(11) Certifying that a hazardous material is in proper condition for transportation in conformance with the requirements of the HMR.</P> <P>(12) Loading, blocking, and bracing a hazardous materials package in a freight container or transport vehicle.</P> <P>(13) Segregating a hazardous materials package in a freight container or transport vehicle from incompatible cargo.</P> <P>(14) Selecting, providing, or affixing placards for a freight container or transport vehicle to indicate that it contains a hazardous material.</P> <P> <E T="03">Primary hazard</E> means the hazard class of a material as assigned in the § 172.101 table.</P> <P> <E T="03">Private track</E> or <E T="03">Private siding</E> means: (i) Track located outside of a carrier's right-of-way, yard, or terminals where the carrier does not own the rails, ties, roadbed, or right-of-way, or</P> <P>(ii) Track leased by a railroad to a lessee, where the lease provides for, and actual practice entails, exclusive use of that trackage by the lessee and/or a general system railroad for purpose of moving only cars shipped to or by the lessee, and where the lessor otherwise exercises no control over or responsibility for the trackage or the cars on the trackage.</P> <P> <E T="03">Proper shipping name</E> means the name of the hazardous material shown in Roman print (not italics) in § 172.101 of this subchapter.<PRTPAGE P="105"/> </P> <P> <E T="03">Psi</E> means pounds per square inch.</P> <P> <E T="03">Psia</E> means pounds per square inch absolute.</P> <P> <E T="03">Psig</E> means pounds per square inch gauge.</P> <P> <E T="03">Public vessel</E> means a vessel owned by and being used in the public service of the United States. It does not include a vessel owned by the United States and engaged in a trade or commercial service or a vessel under contract or charter to the United States.</P> <P> <E T="03">Pyrophoric liquid.</E> See § 173.124(b) of this subchapter.</P> <P> <E T="03">Radioactive materials.</E> See § 173.403 of this subchapter for definitions relating to radioactive materials.</P> <P> <E T="03">Rail car</E> means a car designed to carry freight or non-passenger personnel by rail, and includes a box car, flat car, gondola car, hopper car, tank car, and occupied caboose.</P> <P> <E T="03">Railroad</E> means a person engaged in transportation by rail.</P> <P> <E T="03">Receptacle</E> means a containment vessel for receiving and holding materials, including any means of closing.</P> <P> <E T="03">Reconditioned packaging.</E> See § 173.28 of this subchapter.</P> <P> <E T="03">Registered Inspector</E> means a person registered with the Department in accordance with subpart F of part 107 of this chapter who has the knowledge and ability to determine whether a cargo tank conforms to the applicable DOT specification. A <E T="03">Registered Inspector</E> meets the knowledge and ability requirements of this section by meeting any one of the following requirements:</P> <P>(1) Has an engineering degree and one year of work experience relating to the testing and inspection of cargo tanks;</P> <P>(2) Has an associate degree in engineering and two years of work experience relating to the testing and inspection of cargo tanks;</P> <P>(3) Has a high school diploma (or General Equivalency Diploma) and three years of work experience relating to the testing and inspection of cargo tanks; or</P> <P>(4) Has at least three years' experience performing the duties of a Registered Inspector prior to September 1, 1991.</P> <P> <E T="03">Regulated medical waste.</E> See § 173.134 of this subchapter.</P> <P> <E T="03">Remanufactured packagings.</E> See § 173.28 of this subchapter.</P> <P> <E T="03">Reportable quantity (RQ)</E> for the purposes of this subchapter means the quantity specified in column 2 of the appendix to § 172.101 for any material identified in column 1 of the appendix.</P> <P> <E T="03">Research</E> means investigation or experimentation aimed at the discovery of new theories or laws and the discovery and interpretation of facts or revision of accepted theories or laws in the light of new facts. Research does not include the application of existing technology to industrial endeavors.</P> <P> <E T="03">Residue</E> means the hazardous material remaining in a packaging, including a tank car, after its contents have been unloaded to the maximum extent practicable and before the packaging is either refilled or cleaned of hazardous material and purged to remove any hazardous vapors.</P> <P> <E T="03">Reused packaging.</E> See § 173.28 of this subchapter.</P> <P> <E T="03">SADT</E> means self-accelerated decomposition temperature. See § 173.21(f) of this subchapter.</P> <P> <E T="03">Salvage packaging</E> means a special packaging conforming to § 173.3 of this subchapter into which damaged, defective, leaking, or non-conforming hazardous materials packages, or hazardous materials that have spilled or leaked, are placed for purposes of transport for recovery or disposal.</P> <P> <E T="03">SCF</E> (standard cubic foot) means one cubic foot of gas measured at 60 °F. and 14.7 psia.</P> <P> <E T="03">Secretary</E> means the Secretary of Transportation.</P> <P> <E T="03">Self-defense spray</E> means an aerosol or non-pressurized device that:</P> <P>(1) Is intended to have an irritating or incapacitating effect on a person or animal; and</P> <P>(2) Meets no hazard criteria other than for Class 9 (for example, a pepper spray; see § 173.140(a) of this subchapter) and, for an aerosol, Division 2.1 or 2.2 (see § 173.115 of this subchapter), except that it may contain not more than two percent by mass of a tear gas substance (e.g., chloroacetophenone (CN) or 0-chlorobenzylmalonitrile (CS); see § 173.132(a)(2) of this subchapter.)</P> <P> <E T="03">Settled pressure</E> means the pressure exerted by the contents of a UN pressure receptacle in thermal and diffusive equilibrium.<PRTPAGE P="106"/> </P> <P> <E T="03">Sharps.</E> See § 173.134 of this subchapter.</P> <P> <E T="03">Shipping paper</E> means a shipping order, bill of lading, manifest or other shipping document serving a similar purpose and prepared in accordance with subpart C of part 172 of this chapter.</P> <P> <E T="03">Siftproof packaging</E> means a packaging impermeable to dry contents, including fine solid material produced during transportation.</P> <P> <E T="03">Single packaging</E> means a non-bulk packaging other than a combination packaging.</P> <P> <E T="03">Solid</E> means a material which is not a gas or a liquid.</P> <P> <E T="03">Solution</E> means any homogeneous liquid mixture of two or more chemical compounds or elements that will not undergo any segregation under conditions normal to transportation.</P> <P> <E T="03">Special permit</E> means a document issued by the Associate Administrator, or other designated Department official, under the authority of 49 U.S.C. 5117 permitting a person to perform a function that is not otherwise permitted under subchapters A or C of this chapter, or other regulations issued under 49 U.S.C. 5101 <E T="03">et seq.</E> (e.g., Federal Motor Carrier Safety routing requirements). The terms “special permit” and “exemption” have the same meaning for purposes of subchapters A or C of this chapter or other regulations issued under 49 U.S.C. 5101 through 5128.</P> <P> <E T="03">Specification packaging</E> means a packaging conforming to one of the specifications or standards for packagings in part 178 or part 179 of this subchapter.</P> <P> <E T="03">Spontaneously combustible material.</E> See § 173.124(b) of this subchapter.</P> <P> <E T="03">Stabilized</E> means that the hazardous material is in a condition that precludes uncontrolled reaction. This may be achieved by methods such as adding an inhibiting chemical, degassing the hazardous material to remove dissolved oxygen and inerting the air space in the package, or maintaining the hazardous material under temperature control.</P> <P> <E T="03">State</E> means a State of the United States, the District of Columbia, the Commonwealth of Puerto Rico, the Commonwealth of the Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other territory or possession of the United States designated by the Secretary.</P> <P> <E T="03">State-designated route</E> means a preferred route selected in accordance with U.S. DOT “Guidelines for Selecting Preferred Highway Routes for Highway Route Controlled Quantities of Radioactive Materials” or an equivalent routing analysis which adequately considers overall risk to the public.</P> <P> <E T="03">Storage incidental to movement</E> means storage of a transport vehicle, freight container, or package containing a hazardous material by any person between the time that a carrier takes physical possession of the hazardous material for the purpose of transporting it in commerce until the package containing the hazardous material is physically delivered to the destination indicated on a shipping document, package marking, or other medium, or, in the case of a private motor carrier, between the time that a motor vehicle driver takes physical possession of the hazardous material for the purpose of transporting it in commerce until the driver relinquishes possession of the package at its destination and is no longer responsible for performing functions subject to the HMR with respect to that particular package.</P> <P>(1) <E T="03">Storage incidental to movement</E> includes—</P> <P>(i) Storage at the destination shown on a shipping document, including storage at a transloading facility, provided the shipping documentation identifies the shipment as a through-shipment and identifies the final destination or destinations of the hazardous material; and</P> <P>(ii) Rail cars containing hazardous materials that are stored on track that does not meet the definition of “private track or siding” in § 171.8, even if those cars have been delivered to the destination shown on the shipping document.</P> <P>(2) Storage incidental to movement does not include storage of a hazardous material at its final destination as shown on a shipping document.</P> <P> <E T="03">Stowage</E> means the act of placing hazardous materials on board a vessel.<PRTPAGE P="107"/> </P> <P> <E T="03">Strong outer packaging</E> means the outermost enclosure that provides protection against the unintentional release of its contents. It is a packaging that is sturdy, durable, and constructed so that it will retain its contents under normal conditions of transportation. In addition, a strong outer packaging must meet the general packaging requirements of subpart B of part 173 of this subchapter but need not comply with the specification packaging requirements in part 178 of the subchapter. For transport by aircraft, a strong outer packaging is subject to § 173.27 of this subchapter. The terms “strong outside container” and “strong outside packaging” are synonymous with “strong outer packaging.”</P> <P> <E T="03">Subsidiary hazard</E> means a hazard of a material other than the primary hazard. (See <E T="03">primary hazard</E>).</P> <P> <E T="03">Table in § 172.101</E> or <E T="03">§ 172.101 table</E> means the Hazardous Materials Table in § 172.101 of this subchapter.</P> <P> <E T="03">Technical name</E> means a recognized chemical name or microbiological name currently used in scientific and technical handbooks, journals, and texts. Generic descriptions are authorized for use as technical names provided they readily identify the general chemical group, or microbiological group. Examples of acceptable generic chemical descriptions are organic phosphate compounds, petroleum aliphatic hydrocarbons and tertiary amines. For proficiency testing only, generic microbiological descriptions such as bacteria, mycobacteria, fungus, and viral samples may be used. Except for names which appear in subpart B of part 172 of this subchapter, trade names may not be used as technical names.</P> <P> <E T="03">TOFC</E> means trailer-on-flat-car.</P> <P> <E T="03">Top shell</E> means the tank car tank surface, excluding the head ends and bottom shell of the tank car tank.</P> <P> <E T="03">Toxin.</E> See § 173.134 of this subchapter.</P> <P> <E T="03">Trailership</E> means a vessel, other than a carfloat, specifically equipped to carry motor transport vehicles and fitted with installed securing devices to tie down each vehicle. The term <E T="03">trailership</E> includes <E T="03">Roll-on/Roll-off (RO/RO)</E> vessels.</P> <P> <E T="03">Train</E> means one or more engines coupled with one or more rail cars, except during switching operations or where the operation is that of classifying and assembling rail cars within a railroad yard for the purpose of making or breaking up trains.</P> <P> <E T="03">Trainship</E> means a vessel other than a rail car ferry or carfloat, specifically equipped to transport railroad vehicles, and fitted with installed securing devices to tie down each vehicle.</P> <P> <E T="03">Transloading</E> means the transfer of a hazardous material by any person from one bulk packaging to another bulk packaging, from a bulk packaging to a non-bulk packaging, or from a non-bulk packaging to a bulk packaging for the purpose of continuing the movement of the hazardous material in commerce.</P> <P> <E T="03">Transport vehicle</E> means a cargo-carrying vehicle such as an automobile, van, tractor, truck, semitrailer, tank car or rail car used for the transportation of cargo by any mode. Each cargo-carrying body (trailer, rail car, etc.) is a separate transport vehicle.</P> <P> <E T="03">Transportation</E> or <E T="03">transport</E> means the movement of property and loading, unloading, or storage incidental to that movement.</P> <P> <E T="03">UFC</E> means Uniform Freight Classification.</P> <P> <E T="03">UN</E> means United Nations.</P> <P> <E T="03">UN cylinder</E> means a transportable pressure receptacle with a water capacity not exceeding 150 L that has been marked and certified as conforming to the applicable requirements in part 178 of this subchapter.</P> <P> <E T="03">UN portable tank</E> means an intermodal tank having a capacity of more than 450 liters (118.9 gallons). It includes a shell fitted with service equipment and structural equipment, including stabilizing members external to the shell and skids, mountings or accessories to facilitate mechanical handling. A UN portable tank must be capable of being filled and discharged without the removal of its structural equipment and must be capable of being lifted when full. Cargo tanks, rail tank car tanks, non-metallic tanks, non-specification tanks, bulk bins, and IBCs and packagings made to cylinder specifications are not UN portable tanks.</P> <P> <E T="03">UN pressure receptacle</E> means a UN cylinder or tube.<PRTPAGE P="108"/> </P> <P> <E T="03">UN Recommendations</E> means the UN Recommendations on the Transport of Dangerous Goods (IBR, see § 171.7).</P> <P> <E T="03">UN standard packaging</E> means a packaging conforming to standards in the UN Recommendations (IBR, see § 171.7).</P> <P> <E T="03">UN tube</E> means a seamless transportable pressure receptacle with a water capacity exceeding 150 L but not more than 3,000 L that has been marked and certified as conforming to the requirements in part 178 of this subchapter.</P> <P> <E T="03">Undeclared hazardous material</E> means a hazardous material that is: (1) Subject to any of the hazard communication requirements in subparts C (Shipping Papers), D (Marking), E (Labeling), and F (Placarding) of Part 172 of this subchapter, or an alternative marking requirement in Part 173 of this subchapter (such as §§ 173.4(a)(10) and 173.6(c)); and (2) offered for transportation in commerce without any visible indication to the person accepting the hazardous material for transportation that a hazardous material is present, on either an accompanying shipping document, or the outside of a transport vehicle, freight container, or package.</P> <P> <E T="03">Unintentional release</E> means the escape of a hazardous material from a package on an occasion not anticipated or planned. This includes releases resulting from collision, package failures, human error, criminal activity, negligence, improper packing, or unusual conditions such as the operation of pressure relief devices as a result of over-pressurization, overfill or fire exposure. It does not include releases, such as venting of packages, where allowed, and the operational discharge of contents from packages.</P> <P> <E T="03">Unit load device</E> means any type of freight container, aircraft container, aircraft pallet with a net, or aircraft pallet with a net over an igloo.</P> <P> <E T="03">United States</E> means a State of the United States, the District of Columbia, the Commonwealth of Puerto Rico, the Commonwealth of the Northern Mariana Islands, the Virgin Islands, American Samoa, Guam, or any other territory or possession of the United States designated by the Secretary.</P> <P> <E T="03">Unloading incidental to movement</E> means removing a packaged or containerized hazardous material from a transport vehicle, aircraft, or vessel, or for a bulk packaging, emptying a hazardous material from the bulk packaging after the hazardous material has been delivered to the consignee when performed by carrier personnel or in the presence of carrier personnel or, in the case of a private motor carrier, while the driver of the motor vehicle from which the hazardous material is being unloaded immediately after movement is completed is present during the unloading operation. (Emptying a hazardous material from a bulk packaging while the packaging is on board a vessel is subject to separate regulations as delegated by Department of Homeland Security Delegation No. 0170.1 at 2(103).) <E T="03">Unloading incidental to movement</E> includes transloading.</P> <P> <E T="03">Vessel</E> includes every description of watercraft, used or capable of being used as a means of transportation on the water.</P> <P> <E T="03">Viscous liquid</E> means a liquid material which has a measured viscosity in excess of 2500 centistokes at 25 °C. (77 °F.) when determined in accordance with the procedures specified in ASTM Method D 445-72 “Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)” or ASTM Method D 1200-70 “Viscosity of Paints, Varnishes, and Lacquers by Ford Viscosity Cup.”</P> <P> <E T="03">Volatility</E> refers to the relative rate of evaporation of materials to assume the vapor state.</P> <P> <E T="03">Water reactive material.</E> See § 173.124(c) of this subchapter.</P> <P> <E T="03">Water resistant</E> means having a degree of resistance to permeability by and damage caused by water in liquid form.</P> <P> <E T="03">Wooden barrel</E> means a packaging made of natural wood, of round cross-section, having convex walls, consisting of staves and heads and fitted with hoops.</P> <P> <E T="03">Working pressure</E> for purposes of UN pressure receptacles, means the settled pressure of a compressed gas at a reference temperature of 15 °C (59 °F).</P> <P> <E T="03">W.T.</E> means watertight.</P> <CITA>[Amdt. 171-32, 41 FR 15994, Apr. 15, 1976]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 171.8, see the List of CFR <PRTPAGE P="109"/>Sections Affected which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 171.9</SECTNO> <SUBJECT>Rules of construction.</SUBJECT> <P>(a) In this subchapter, unless the context requires otherwise:</P> <P>(1) Words imparting the singular include the plural;</P> <P>(2) Words imparting the plural include the singular; and</P> <P>(3) Words imparting the masculine gender include the feminine;</P> <P>(b) In this subchapter, the word: (1) “Shall” is used in an imperative sense;</P> <P>(2) “Must” is used in an imperative sense;</P> <P>(3) “Should” is used in a recommendatory sense;</P> <P>(4) “May” is used in a permissive sense to state authority or permission to do the act described, and the words “no person may * * *” or “a person may not * * *” means that no person is required, authorized, or permitted to do the act described; and</P> <P>(5) “Includes” is used as a word of inclusion not limitation.</P> <CITA>[Amdt. 171-32, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 171-32A, 41 FR 40630, Sept. 20, 1976; Amdt. 171-121, 58 FR 51528, Oct. 1, 1993; 75 FR 60338, Sept. 30, 2010]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.10</SECTNO> <SUBJECT>Units of measure.</SUBJECT> <P>(a) <E T="03">General.</E> To ensure compatibility with international transportation standards, most units of measure in this subchapter are expressed using the International System of Units (“SI” or metric). Where SI units appear, they are the regulatory standard. U.S. standard or customary units, which appear in parentheses following the SI units, are for information only and are not intended to be the regulatory standard.</P> <P>(b) Abbreviations for SI units of measure generally used throughout this subchapter are as shown in paragraph (c) of this section. Customary units shown throughout this subchapter are generally not abbreviated.</P> <P>(c) <E T="03">Conversion values.</E> (1) Conversion values are provided in the following table and are based on values provided in ASTM E 380, “Standard for Metric Practice”.</P> <P>(2) If an exact conversion is needed, the following conversion table should be used.</P> <GPOTABLE CDEF="s100,r100,xs120" COLS="3" OPTS="L2"> <TTITLE>Table of Conversion Factors for SI Units</TTITLE> <BOXHD> <CHED H="1">Measurement</CHED> <CHED H="1">SI to U.S. standard</CHED> <CHED H="1">U.S. standard to SI</CHED> </BOXHD> <ROW> <ENT I="01">Activity</ENT> <ENT>1 TBq=27 Ci</ENT> <ENT>1 Ci=0.037 TBq</ENT> </ROW> <ROW> <ENT I="01">Length</ENT> <ENT>1 cm=0.3937008 in<LI>1 m=3.280840 ft</LI> </ENT> <ENT>1 in=2.540000 cm<LI>1 ft=0.3048000 m</LI> </ENT> </ROW> <ROW> <ENT I="01">Thickness</ENT> <ENT>1 mm=0.03937008 in</ENT> <ENT>1 in=25.40000 mm</ENT> </ROW> <ROW> <ENT I="01">Mass (weight)</ENT> <ENT>1 kg=2.204622 lb<LI>1 g=0.03527397 oz</LI> </ENT> <ENT>1 lb=0.4535924 kg<LI>1 oz=28.34952 g</LI> </ENT> </ROW> <ROW> <ENT I="01">Pressure</ENT> <ENT>1 kPa=0.1450377 psi<LI>1 Bar=100 kPa=14.504 psi</LI> <LI>1 kPa=7.5 mm Hg</LI> </ENT> <ENT>1 psi=6.894757 kPa<LI>1 psi=0.06895 Bar</LI> </ENT> </ROW> <ROW> <ENT I="01">Radiation level</ENT> <ENT>1 Sv/hr=100 rem/hr</ENT> <ENT>1 rem/hr=0.01 Sv/hr</ENT> </ROW> <ROW> <ENT I="01">Volume (liquid)</ENT> <ENT>1 L=0.2641720 gal<LI>1 mL=0.03381402 oz</LI> <LI>1 m<SU>3</SU>=35.31466 ft<SU>3</SU> </LI> </ENT> <ENT>1 gal=3.785412 L<LI>1 oz=29.57353 mL</LI> <LI>1 ft<SU>3</SU>=0.02831685 m<SU>3</SU> </LI> </ENT> </ROW> <ROW> <ENT I="01">Density</ENT> <ENT>1 kg/m<SU>3</SU>=0.06242797 lb/ft<SU>3</SU> </ENT> <ENT>1 lb/ft<SU>3</SU>=16.01846 kg/m<SU>3</SU> </ENT> </ROW> <ROW> <ENT I="01">Force</ENT> <ENT>1 Newton = 0.2248 Pound-force</ENT> <ENT>1 Pound-force=4.483 N</ENT> </ROW> <TNOTE>Abbreviation for units of measure are as follows:</TNOTE> <TNOTE>Unit of measure and abbreviation:</TNOTE> <TNOTE>(SI): millimeter, mm; centimeter, cm; meter, m; gram, g; kilogram, kg; kiloPascal, kPa; liter, L; milliliter, mL; cubic meter, m<SU>3</SU>; Terabecquerel, TBq; Gigabecquerel, GBq; millisievert, mSv; Newton, N;</TNOTE> <TNOTE>(U.S.): Inch, in; foot, ft; ounce, oz; pound, lb; psig, psi; gallon, gal; cubic feet, ft <SU>3</SU>; Curie, Ci; millicurie, mCi; millirem, mrem.</TNOTE> </GPOTABLE> <CITA>[Amdt. 171-111, 56 FR 66159, Dec. 20, 1991, as amended by Amdt. 171-136, 60 FR 49108, Sept. 21, 1995; Amdt. 171-135, 60 FR 50302, Sept. 28, 1995; 66 FR 33335, June 21, 2001; 66 FR 45378, Aug. 28, 2001; 68 FR 75740, Dec. 31, 2003]</CITA> </SECTION> <SECTION> <PRTPAGE P="110"/> <SECTNO>§ 171.11</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 171.12</SECTNO> <SUBJECT>North American Shipments.</SUBJECT> <P>(a) <E T="03">Requirements for the use of the Transport Canada TDG Regulations.</E> (1) A hazardous material transported from Canada to the United States, from the United States to Canada, or transiting the United States to Canada or a foreign destination may be offered for transportation or transported by motor carrier and rail in accordance with the Transport Canada TDG Regulations (IBR, see § 171.7) as authorized in § 171.22, provided the requirements in §§ 171.22 and 171.23, as applicable, and this section are met. In addition, a cargo tank motor vehicle, portable tank or rail tank car authorized by the Transport Canada TDG Regulations may be used for transportation to, from, or within the United States provided the cargo tank motor vehicle, portable tank or rail tank car conforms to the applicable requirements of this section. Except as otherwise provided in this subpart and subpart C of this part, the requirements in parts 172, 173, and 178 of this subchapter do not apply for a material transported in accordance with the Transport Canada TDG Regulations.</P> <P>(2) <E T="03">General packaging requirements</E>. When the provisions of this subchapter require a DOT specification or UN standard packaging to be used for transporting a hazardous material, a packaging authorized by the Transport Canada TDG Regulations may be used, subject to the limitations of this part, and only if it is equivalent to the corresponding DOT specification or UN packaging (see § 173.24(d)(2) of this subchapter) authorized by this subchapter.</P> <P>(3) <E T="03">Bulk packagings.</E> A portable tank, cargo tank motor vehicle or rail tank car equivalent to a corresponding DOT specification and conforming to and authorized by the Transport Canada TDG Regulations may be used provided—</P> <P>(i) An equivalent type of packaging is authorized for the hazardous material according to the § 172.101 table of this subchapter;</P> <P>(ii) The portable tank, cargo tank motor vehicle or rail tank car conforms to the requirements of the applicable part 173 bulk packaging section specified in the § 172.101 table for the material to be transported;</P> <P>(iii) The portable tank, cargo tank motor vehicle or rail tank car conforms to the requirements of all assigned bulk packaging special provisions (B codes, and T and TP codes) in § 172.102 of this subchapter; and</P> <P>(iv) The bulk packaging conforms to all applicable requirements of §§ 173.31, 173.32, 173.33 and 173.35 of this subchapter, and parts 177 and 180 of this subchapter. The periodic retests and inspections required by §§ 173.31, 173.32 and 173.33 of this subchapter may be performed in accordance with part 180 of this subchapter or in accordance with the requirements of the TDG Regulations provided that the intervals prescribed in part 180 of this subchapter are met.</P> <P>(v) Rail tank cars must conform to the requirements of Canadian General Standards Board standard 43.147 (IBR, see § 171.7).</P> <P>(4) <E T="03">Cylinders.</E> When the provisions of this subchapter require that a DOT specification or a UN pressure receptacle must be used for a hazardous material, a packaging authorized by the Transport Canada TDG Regulations may be used only if it corresponds to the DOT specification or UN standard authorized by this subchapter. Unless otherwise excepted in this subchapter, a cylinder (including a UN pressure receptacle) may not be transported unless—</P> <P>(i) The packaging is a UN pressure receptacle marked with the letters “CAN” for Canada as a country of manufacture or a country of approval or is a cylinder that was manufactured, inspected and tested in accordance with a DOT specification or a UN standard prescribed in part 178 of this subchapter, except that cylinders not conforming to these requirements must meet the requirements in § 171.23. Each cylinder must conform to the applicable requirements in part 173 of this subchapter for the hazardous material involved.</P> <P>(ii) The packaging is a Canadian Transport Commission (CTC) specification cylinder manufactured, originally marked and approved in accordance with the CTC regulations and in full <PRTPAGE P="111"/>conformance with the Transport Canada TDG Regulations.</P> <P>(A) The CTC specification corresponds with a DOT specification and the cylinder markings are the same as those specified in this subchapter except that they were originally marked with the letters “CTC” in place of “DOT”;</P> <P>(B) The cylinder has been requalified under a program authorized by the Transport Canada TDG Regulations or requalified in accordance with the requirements in § 180.205 within the prescribed requalification period provided for the corresponding DOT specification;</P> <P>(C) When the regulations authorize a cylinder for a specific hazardous material with a specification marking prefix of “DOT”, a cylinder marked “CTC” which otherwise bears the same markings that would be required of the specified “DOT” cylinder may be used; and</P> <P>(D) Transport of the cylinder and the material it contains is in all other respects in conformance with the requirements of this subchapter (e.g. valve protection, filling requirements, operational requirements, etc.).</P> <P>(5) <E T="03">Class 1 (explosive) materials</E>. When transporting Class 1 (explosive) material, rail and motor carriers must comply with 49 CFR 1572.9 and 1572.11 to the extent the requirements apply.</P> <P>(6) <E T="03">Primary lithium batteries and cells.</E> Packages containing primary lithium batteries and cells that meet the exception in § 172.102, Special Provision 188 or 189 of this subchapter must be marked “PRIMARY LITHIUM BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT” or “LITHIUM METAL BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT.” The provisions of this paragraph do not apply to packages that contain 5 kg (11 pounds) net weight or less of primary lithium batteries cells that are contained in or packed with equipment.</P> <P>(b) <E T="03">Shipments to or from Mexico.</E> Unless otherwise excepted, hazardous materials shipments from Mexico to the United States or from the United States to Mexico must conform to all applicable requirements of this subchapter. When a hazardous material that is a material poisonous by inhalation (see § 171.8) is transported by highway or rail from Mexico to the United States, or from the United States to Mexico, the following requirements apply:</P> <P>(1) The shipping description must include the words “Toxic Inhalation Hazard” or “Poison-Inhalation Hazard” or “Inhalation Hazard”, as required in § 172.203(m) of this subchapter.</P> <P>(2) The material must be packaged in accordance with requirements of this subchapter.</P> <P>(3) The package must be marked in accordance with § 172.313 of this subchapter.</P> <P>(4) Except as provided in paragraph (e)(5) of this section, the package must be labeled or placarded POISON GAS or POISON INHALATION HAZARD, as appropriate, in accordance with subparts E and F of this subchapter.</P> <P>(5) A label or placard that conforms to the UN Recommendations (IBR, see § 171.7) specifications for a “Division 2.3” or “Division 6.1” label or placard may be substituted for the POISON GAS or POISON INHALATION HAZARD label or placard required by §§ 172.400(a) and 172.504(e) of this subchapter on a package transported in a closed transport vehicle or freight container. The transport vehicle or freight container must be marked with identification numbers for the material, regardless of the total quantity contained in the transport vehicle or freight container, in the manner specified in § 172.313(c) of this subchapter and placarded as required by subpart F of this subchapter.</P> <CITA>[Amdt. 171-111, 55 FR 52472, Dec. 21, 1990]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 171.12, see the List of CFR Sections Affected which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> <SECTION> <SECTNO>§ 171.12a</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 171.14</SECTNO> <SUBJECT>Transitional provisions for implementing certain requirements.</SUBJECT> <P> <E T="03">General.</E> The purpose of the provisions of this section is to provide an orderly transition to certain new requirements so as to minimize any burdens associated with them.<PRTPAGE P="112"/> </P> <P>(a) <E T="03">Previously filled packages</E>—(1) <E T="03">Packages filled prior to October 1, 1991.</E> Notwithstanding the marking and labeling provisions of subparts D and E, respectively, of part 172, and the packaging provisions of part 173 and subpart B of part 172 of this subchapter, a package may be offered for transportation and transported prior to October 1, 2001, if it—</P> <P>(i) Conforms to the old requirements of this subchapter in effect on September 30, 1991;</P> <P>(ii) Was filled with a hazardous material prior to October 1, 1991;</P> <P>(iii) Is marked “Inhalation Hazard” if appropriate, in accordance with § 172.313 of this subchapter or Special Provision 13, as assigned in the § 172.101 table; and</P> <P>(iv) Is not emptied and refilled on or after October 1, 1991.</P> <P>(2) <E T="03">Non-bulk packages filled prior to October 1, 1996.</E> Notwithstanding the packaging provisions of subpart B of part 172 and the packaging provisions of part 173 of this subchapter with respect to UN standard packagings, a non-bulk package other than a cylinder may be offered for transportation and transported domestically prior to October 1, 1999, if it—</P> <P>(i) Conforms to the requirements of this subchapter in effect on September 30, 1996;</P> <P>(ii) Was filled with a hazardous material prior to October 1, 1996; and</P> <P>(iii) Is not emptied and refilled on or after October 1, 1996.</P> <P>(b) [Reserved]</P> <P>(c) <E T="03">Non-specification fiber drums.</E> A non-specification fiber drum with a removable head is authorized for a liquid hazardous material in Packing Group III that is not poisonous by inhalation for which the packaging was authorized under the requirements of part 172 or part 173 of this subchapter in effect on September 30, 1991. This authorization expires on the date on which funds are authorized to be appropriated to carry out chapter 51 of title 49, United States Code (related to transportation of hazardous materials), for fiscal years beginning after September 30, 1997. Information concerning this funding authorization date may be obtained by contacting the Office of the Associate Administrator.</P> <P>(d) A final rule published in the <E T="04">Federal Register</E> on December 29, 2006, effective January 1, 2007, resulted in revisions to this subchapter. During the transition period, until January 1, 2008, as provided in paragraph (d)(1) of this section, a person may elect to comply with either the applicable requirements of this subchapter in effect on December 31, 2006, or the requirements published in the December 29, 2006 final rule.</P> <P>(1) <E T="03">Transition dates.</E> The effective date of the final rule published on December 29, 2006 is January 1, 2007. A delayed compliance date of January 1, 2008, is authorized. Unless otherwise specified, on and after January 1, 2008, all applicable regulatory requirements adopted in the final rule in effect on January 1, 2007, must be met.</P> <P>(2) <E T="03">Intermixing old and new requirements.</E> Marking, labeling, placarding, and shipping paper descriptions must conform to either the old requirements of this subchapter in effect on December 31, 2006, or the new requirements of this subchapter in the final rule without intermixing communication elements, except that intermixing is permitted during the applicable transition period for packaging, hazard communication and handling provisions, as follows:</P> <P>(i) If either shipping names or identification numbers are identical, a shipping paper may display the old shipping description even if the package is marked and labeled under the new shipping description;</P> <P>(ii) If either shipping names or identification numbers are identical, a shipping paper may display the new shipping description; and</P> <P>(iii) Either old or new placards may be used regardless of whether old or new shipping descriptions, labels, and package markings are used.</P> <P>(3) [Reserved]</P> <P>(4) Until January 1, 2010, a hazardous material may be transported in an IM, IMO, or DOT Specification 51 portable tank in accordance with the T Codes (Special Provisions) assigned to a hazardous material in Column (7) of the § 172.101 Table in effect on September 30, 2001.</P> <P>(5) Proper shipping names that included the word “inhibited” prior to <PRTPAGE P="113"/>the June 21, 2001 final rule in effect on October 1, 2001 are authorized on packagings and shipping papers in place of the word “stabilized” until October 1, 2007. Proper shipping names that included the word “compressed” prior to the final rule published on July 31, 2003 and effective on October 1, 2003 may continue to be shown on packagings and shipping papers until October 1, 2007.</P> <P>(6) Section 172.202(a)(7) requires the number and types of packages to be indicated on shipping papers. Until October 1, 2007, a person may elect to comply with the requirements for the number and type of packages in effect on September 30, 2003.</P> <P>(e) The shipping description sequences in effect on December 31, 2006, may be used until January 1, 2013.</P> <P>(f) Except for transportation by highway, a Division 5.2 label and a Division 5.2 placard conforming to the specifications in §§ 172.427 and 172.552, respectively, of this subchapter in effect on December 31, 2006, may be used until January 1, 2011. For transportation by highway, a Division 5.2 placard conforming to the specifications in § 172.552 of this subchapter in effect on December 31, 2006 may be used until January 1, 2014.</P> <P>(g) The Class 3 and Division 6.1 classification criteria and packing group assignments in effect on December 31, 2006, may be used until January 1, 2012.</P> <P>(h) The proper shipping name “Gasohol <E T="03">gasoline mixed with ethyl alcohol, with not more than 20 percent alcohol</E>” in effect on January 28, 2008, may continue to be used until October 1, 2010. Effective October 1, 2010, the new proper shipping name “Ethanol and gasoline mixture <E T="03">or</E> ethanol and motor spirit mixture or ethanol and petrol mixture,” and the revised proper shipping name “Gasohol <E T="03">gasoline mixed with ethyl alcohol, with not more than 10% alcohol</E>” must be used, as appropriate.</P> <CITA>[Amdt. 171-131, 59 FR 67406, Dec. 29, 1994]</CITA> <EDNOTE> <HD SOURCE="HED">Editorial Note:</HD> <P>For <E T="04">Federal Register</E> citations affecting § 171.14, see the List of CFR Sections Affected which appears in the Finding Aids section of the printed volume and on GPO Access.</P> </EDNOTE> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Incident Reporting, Notification, BOE Approvals and Authorization</HD> <SECTION> <SECTNO>§ 171.15</SECTNO> <SUBJECT>Immediate notice of certain hazardous materials incidents.</SUBJECT> <P>(a) <E T="03">General</E>. As soon as practical but no later than 12 hours after the occurrence of any incident described in paragraph (b) of this section, each person in physical possession of the hazardous material must provide notice to the National Response Center (NRC) by telephone at 800-424-8802 (toll free) or 202-267-2675 (toll call) or online at <E T="03">http://www.nrc.uscg.mil</E>. Notice involving an infectious substance (etiologic agent) may be given to the Director, Centers for Disease Control and Prevention (CDC), U.S. Public Health Service, Atlanta, GA, 800-232-0124 (toll free), in place of notice to the NRC. Each notice must include the following information:</P> <P>(1) Name of reporter;</P> <P>(2) Name and address of person represented by reporter;</P> <P>(3) Phone number where reporter can be contacted;</P> <P>(4) Date, time, and location of incident;</P> <P>(5) The extent of injury, if any;</P> <P>(6) Class or division, proper shipping name, and quantity of hazardous materials involved, if such information is available; and</P> <P>(7) Type of incident and nature of hazardous material involvement and whether a continuing danger to life exists at the scene.</P> <P>(b) <E T="03">Reportable incident.</E> A telephone report is required whenever any of the following occurs during the course of transportation in commerce (including loading, unloading, and temporary storage):</P> <P>(1) As a direct result of a hazardous material—</P> <P>(i) A person is killed;</P> <P>(ii) A person receives an injury requiring admittance to a hospital;</P> <P>(iii) The general public is evacuated for one hour or more;</P> <P>(iv) A major transportation artery or facility is closed or shut down for one hour or more; or</P> <P>(v) The operational flight pattern or routine of an aircraft is altered;<PRTPAGE P="114"/> </P> <P>(2) Fire, breakage, spillage, or suspected radioactive contamination occurs involving a radioactive material (see also § 176.48 of this subchapter);</P> <P>(3) Fire, breakage, spillage, or suspected contamination occurs involving an infectious substance other than a regulated medical waste;</P> <P>(4) A release of a marine pollutant occurs in a quantity exceeding 450 L (119 gallons) for a liquid or 400 kg (882 pounds) for a solid;</P> <P>(5) A situation exists of such a nature (<E T="03">e.g.</E>, a continuing danger to life exists at the scene of the incident) that, in the judgment of the person in possession of the hazardous material, it should be reported to the NRC even though it does not meet the criteria of paragraphs (b)(1), (2), (3) or (4) of this section; or</P> <P>(6) During transportation by aircraft, a fire, violent rupture, explosion or dangerous evolution of heat (<E T="03">i.e.</E>, an amount of heat sufficient to be dangerous to packaging or personal safety to include charring of packaging, melting of packaging, scorching of packaging, or other evidence) occurs as a direct result of a battery or battery-powered device.</P> <P>(c) <E T="03">Written report.</E> Each person making a report under this section must also make the report required by § 171.16 of this subpart. </P> <NOTE> <HD SOURCE="HED">Note to § 171.15:</HD> <P>Under 40 CFR 302.6, EPA requires persons in charge of facilities (including transport vehicles, vessels, and aircraft) to report any release of a hazardous substance in a quantity equal to or greater than its reportable quantity, as soon as that person has knowledge of the release, to DOT's National Response Center at (toll free) 800-424-8802 or (toll) 202-267-2675.</P> </NOTE> <CITA>[68 FR 67759, Dec. 3, 2003, as amended at 72 FR 55684, Oct. 1, 2007; 74 FR 2233, Jan. 14, 2009; 74 FR 53186, Oct. 16, 2009]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.16</SECTNO> <SUBJECT>Detailed hazardous materials incident reports.</SUBJECT> <P>(a) <E T="03">General.</E> Each person in physical possession of a hazardous material at the time that any of the following incidents occurs during transportation (including loading, unloading, and temporary storage) must submit a Hazardous Materials Incident Report on DOT Form F 5800.1 (01/2004) within 30 days of discovery of the incident:</P> <P>(1) Any of the circumstances set forth in § 171.15(b);</P> <P>(2) An unintentional release of a hazardous material or the discharge of any quantity of hazardous waste;</P> <P>(3) A specification cargo tank with a capacity of 1,000 gallons or greater containing any hazardous material suffers structural damage to the lading retention system or damage that requires repair to a system intended to protect the lading retention system, even if there is no release of hazardous material;</P> <P>(4) An undeclared hazardous material is discovered; or</P> <P>(5) A fire, violent rupture, explosion or dangerous evolution of heat (<E T="03">i.e.</E>, an amount of heat sufficient to be dangerous to packaging or personal safety to include charring of packaging, melting of packaging, scorching of packaging, or other evidence) occurs as a direct result of a battery or battery-powered device.</P> <P>(b) <E T="03">Providing and retaining copies of the report.</E> Each person reporting under this section must—</P> <P>(1) Submit a written Hazardous Materials Incident Report to the Information Systems Manager, PHH-63, Pipeline and Hazardous Materials Safety Administration, Department of Transportation, Washington, DC 20590-0001, or an electronic Hazardous Material Incident Report to the Information System Manager, DHM-63, Research and Special Programs Administration, Department of Transportation, Washington, DC 20590-0001 at <E T="03">http://hazmat.dot.gov;</E> </P> <P>(2) For an incident involving transportation by aircraft, submit a written or electronic copy of the Hazardous Materials Incident Report to the FAA Security Field Office nearest the location of the incident; and</P> <P>(3) Retain a written or electronic copy of the Hazardous Materials Incident Report for a period of two years at the reporting person's principal place of business. If the written or electronic Hazardous Materials Incident Report is maintained at other than the reporting person's principal place of business, the report must be made available at the reporting person's principal place of business within 24 hours of a request <PRTPAGE P="115"/>for the report by an authorized representative or special agent of the Department of Transportation.</P> <P>(c) <E T="03">Updating the incident report.</E> A Hazardous Materials Incident Report must be updated within one year of the date of occurrence of the incident whenever:</P> <P>(1) A death results from injury caused by a hazardous material;</P> <P>(2) There was a misidentification of the hazardous material or package information on a prior incident report;</P> <P>(3) Damage, loss or related cost that was not known when the initial incident report was filed becomes known; or</P> <P>(4) Damage, loss, or related cost changes by $25,000 or more, or 10% of the prior total estimate, whichever is greater.</P> <P>(d) <E T="03">Exceptions.</E> Unless a telephone report is required under the provisions of § 171.15 of this part, the requirements of paragraphs (a), (b), and (c) of this section do not apply to the following incidents:</P> <P>(1) A release of a minimal amount of material from—</P> <P>(i) A vent, for materials for which venting is authorized;</P> <P>(ii) The routine operation of a seal, pump, compressor, or valve; or</P> <P>(iii) Connection or disconnection of loading or unloading lines, provided that the release does not result in property damage.</P> <P>(2) An unintentional release of hazardous material when:</P> <P>(i) The material is properly classed as—</P> <P>(A) ORM-D; or</P> <P>(B) a Packing Group III material in Class or Division 3, 4, 5, 6.1, 8, or 9;</P> <P>(ii) Each package has a capacity of less than 20 liters (5.2 gallons) for liquids or less than 30 kg (66 pounds) for solids;</P> <P>(iii) The total aggregate release is less than 20 liters (5.2 gallons) for liquids or less than 30 kg (66 pounds) for solids; and</P> <P>(iv) The material is not—</P> <P>(A) Offered for transportation or transported by aircraft,</P> <P>(B) A hazardous waste, or</P> <P>(C) An undeclared hazardous material.</P> <P>(3) An undeclared hazardous material discovered in an air passenger's checked or carry-on baggage during the airport screening process. (For discrepancy reporting by carriers, see § 175.31 of this subchapter.)</P> <CITA>[68 FR 67759, Dec. 3, 2003; 69 FR 30119, May 26, 2004, as amended at 70 FR 56091, Sept. 23, 2005; 74 FR 2233, Jan. 14, 2009]</CITA> </SECTION> <SECTION> <SECTNO>§§ 171.17-171.18</SECTNO> <RESERVED>[Reserved]</RESERVED> </SECTION> <SECTION> <SECTNO>§ 171.19</SECTNO> <SUBJECT>Approvals or authorizations issued by the Bureau of Explosives.</SUBJECT> <P>Effective December 31, 1998, approvals or authorizations issued by the Bureau of Explosives (BOE), other than those issued under part 179 of this subchapter, are no longer valid.</P> <CITA>[63 FR 37459, July 10, 1998]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.20</SECTNO> <SUBJECT>Submission of Examination Reports.</SUBJECT> <P>(a) When it is required in this subchapter that the issuance of an approval by the Associate Administrator be based on an examination by the Bureau of Explosives (or any other test facility recognized by PHMSA), it is the responsibility of the applicant to submit the results of the examination to the Associate Administrator.</P> <P>(b) Applications for approval submitted under paragraph (a) of this section, must be submitted to the Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration, Washington, DC 20590-0001.</P> <P>(c) Any applicant for an approval aggrieved by an action taken by the Associate Administrator, under this subpart may file an appeal with the Administrator, PHMSA within 30 days of service of notification of a denial.</P> <CITA>[Amdt. 171-54, 45 FR 32692, May 19, 1980, as amended by Amdt. 171-66, 47 FR 43064, Sept. 30, 1982; Amdt. 171-109, 55 FR 39978, Oct. 1, 1990; Amdt. 171-111, 56 FR 66162, Dec. 20, 1991; 66 FR 45378, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.21</SECTNO> <SUBJECT>Assistance in investigations and special studies.</SUBJECT> <P>(a) A shipper, carrier, package owner, package manufacturer or certifier, repair facility, or person reporting an incident under the provisions of § 171.16 must:<PRTPAGE P="116"/> </P> <P>(1) Make all records and information pertaining to the incident available to an authorized representative or special agent of the Department of Transportation upon request; and</P> <P>(2) Give an authorized representative or special agent of the Department of Transportation reasonable assistance in the investigation of the incident.</P> <P>(b) If an authorized representative or special agent of the Department of Transportation makes an inquiry of a person required to complete an incident report in connection with a study of incidents, the person shall:</P> <P>(1) Respond to the inquiry within 30 days after its receipt or within such other time as the inquiry may specify; and</P> <P>(2) Provide true and complete answers to any questions included in the inquiry.</P> <CITA>[68 FR 67760, Dec. 3, 2003]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Authorization and Requirements for the Use of International Transport Standards and Regulations</HD> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>72 FR 25172, May 3, 2007, unless otherwise noted.</P> </SOURCE> <SECTION> <SECTNO>§ 171.22</SECTNO> <SUBJECT>Authorization and conditions for the use of international standards and regulations.</SUBJECT> <P>(a) <E T="03">Authorized international standards and regulations</E>. This subpart authorizes, with certain conditions and limitations, the offering for transportation and the transportation in commerce of hazardous materials in accordance with the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), the International Maritime Dangerous Goods Code (IMDG Code), Transport Canada's Transportation of Dangerous Goods Regulations (Transport Canada TDG Regulations), and the International Atomic Energy Agency Regulations for the Safe Transport of Radioactive Material (IAEA Regulations) (IBR, see § 171.7).</P> <P>(b) <E T="03">Limitations on the use of international standards and regulations</E>. A hazardous material that is offered for transportation or transported in accordance with the international standards and regulations authorized in paragraph (a) of this section—</P> <P>(1) Is subject to the requirements of the applicable international standard or regulation and must be offered for transportation or transported in conformance with the applicable standard or regulation; and</P> <P>(2) Must conform to all applicable requirements of this subpart.</P> <P>(c) <E T="03">Materials excepted from regulation under international standards and regulations</E>. A material designated as a hazardous material under this subchapter, but excepted from or not subject to the international transport standards and regulations authorized in paragraph (a) of this section (e.g., paragraph 1.16 of the Transport Canada TDG Regulations excepts from regulation quantities of hazardous materials less than or equal to 500 kg gross transported by rail) must be transported in accordance with all applicable requirements of this subchapter.</P> <P>(d) <E T="03">Materials not regulated under this subchapter</E>. Materials not designated as hazardous materials under this subchapter but regulated by an international transport standard or regulation authorized in paragraph (a) of this section may be offered for transportation and transported in the United States in full compliance (i.e., packaged, marked, labeled, classed, described, stowed, segregated, secured) with the applicable international transport standard or regulation.</P> <P>(e) <E T="03">Forbidden materials</E>. No person may offer for transportation or transport a hazardous material that is a forbidden material or package as designated in—</P> <P>(1) Section 173.21 of this subchapter;</P> <P>(2) Column (3) of the § 172.101 Table of this subchapter;</P> <P>(3) Column (9A) of the § 172.101 Table of this subchapter when offered for transportation or transported on passenger aircraft or passenger railcar; or</P> <P>(4) Column (9B) of the § 172.101 Table of this subchapter when offered for transportation or transported by cargo aircraft.</P> <P>(f) <E T="03">Complete information and certification</E>. (1) Except for shipments into <PRTPAGE P="117"/>the United States from Canada conforming to § 171.12, each person importing a hazardous material into the United States must provide the forwarding agent at the place of entry into the United States timely and complete written information as to the requirements of this subchapter applicable to the particular shipment.</P> <P>(2) After May 4, 2009, the shipper, directly or through the forwarding agent at the place of entry, must provide the initial U.S. carrier with the shipper's certification required by § 172.204 of this subchapter, unless the shipment is otherwise excepted from the certification requirement. Except for shipments for which the certification requirement does not apply, a carrier may not accept a hazardous material for transportation unless provided a shipper's certification.</P> <P>(3) All shipping paper information and package markings required in accordance with this subchapter must be in English. The use of shipping papers and a package marked with both English and a language other than English, in order to dually comply with this subchapter and the regulations of a foreign entity, is permitted under this subchapter.</P> <P>(4) Each person who provides for transportation or receives for transportation (see §§ 174.24, 175.30, 176.24 and 177.817 of this subchapter) a shipping paper must retain a copy of the shipping paper or an electronic image thereof that is accessible at or through its principal place of business in accordance with § 172.201(e) of this part.</P> <P>(g) <E T="03">Additional requirements for the use of international standards and regulations</E>. All shipments offered for transportation or transported in the United States in accordance with this subpart must conform to the following requirements of this subchapter, as applicable:</P> <P>(1) The emergency response information requirements in subpart G of part 172 of this subchapter;</P> <P>(2) The training requirements in subpart H of part 172 of this subchapter, including function-specific training in the use of the international transport standards and regulations authorized in paragraph (a) of this section, as applicable;</P> <P>(3) The security requirements in subpart I of part 172 of this subchapter;</P> <P>(4) The incident reporting requirements in §§ 171.15 and 171.16 of this part for incidents occurring within the jurisdiction of the United States including on board vessels in the navigable waters of the United States and aboard aircraft of United States registry anywhere in air commerce;</P> <P>(5) For export shipments, the general packaging requirements in §§ 173.24 and 173.24a of this subchapter;</P> <P>(6) For export shipments, the requirements for the reuse, reconditioning, and remanufacture of packagings in § 173.28 of this subchapter; and</P> <P>(7) The registration requirements in subpart G of part 107 of this chapter.</P> <CITA>[72 FR 25172, May 3, 2007, as amended at 72 FR 55091 Sept. 28, 2007; 74 FR 53186, Oct. 16, 2009]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.23</SECTNO> <SUBJECT>Requirements for specific materials and packagings transported under the ICAO Technical Instructions, IMDG Code, Transport Canada TDG Regulations, or the IAEA Regulations.</SUBJECT> <P>All shipments offered for transportation or transported in the United States under the ICAO Technical Instructions, IMDG Code, Transport Canada TDG Regulations, or the IAEA Regulations (IBR, see § 171.7) must conform to the requirements of this section, as applicable.</P> <P>(a) <E T="03">Conditions and requirements for cylinders</E>—(1) Except as provided in this paragraph, a filled cylinder (pressure receptacle) manufactured to other than a DOT specification or a UN standard in accordance with part 178 of this subchapter, or a DOT exemption or special permit cylinder or a cylinder used as a fire extinguisher in conformance with § 173.309(a) of this subchapter, may not be transported to, from, or within the United States.</P> <P>(2) Cylinders (including UN pressure receptacles) transported to, from, or within the United States must conform to the applicable requirements of this subchapter. Unless otherwise excepted in this subchapter, a cylinder must not be transported unless—</P> <P>(i) The cylinder is manufactured, inspected and tested in accordance with a DOT specification or a UN standard <PRTPAGE P="118"/>prescribed in part 178 of this subchapter, except that cylinders not conforming to these requirements must meet the requirements in paragraphs (a)(3), (a)(4) or (a)(5) of this section;</P> <P>(ii) The cylinder is equipped with a pressure relief device in accordance with § 173.301(f) of this subchapter and conforms to the applicable requirements in part 173 of this subchapter for the hazardous material involved;</P> <P>(iii) The openings on an aluminum cylinder in oxygen service conform to the requirements of this paragraph, except when the cylinder is used for aircraft parts or used aboard an aircraft in accordance with the applicable airworthiness requirements and operating regulations. An aluminum DOT specification cylinder must have an opening configured with straight (parallel) threads. A UN pressure receptacle may have straight (parallel) or tapered threads provided the UN pressure receptacle is marked with the thread type, e.g. “17E, 25E, 18P, or 25P” and fitted with the properly marked valve; and</P> <P>(iv) A UN pressure receptacle is marked with “USA” as a country of approval in conformance with §§ 178.69 and 178.70 of this subchapter.</P> <P>(3) Importation of cylinders for discharge within a single port area: A cylinder manufactured to other than a DOT specification or UN standard in accordance with part 178 of this subchapter and certified as being in conformance with the transportation regulations of another country may be authorized, upon written request to and approval by the Associate Administrator, for transportation within a single port area, provided—</P> <P>(i) The cylinder is transported in a closed freight container;</P> <P>(ii) The cylinder is certified by the importer to provide a level of safety at least equivalent to that required by the regulations in this subchapter for a comparable DOT specification or UN cylinder; and</P> <P>(iii) The cylinder is not refilled for export unless in compliance with paragraph (a)(4) of this section.</P> <P>(4) Filling of cylinders for export or for use on board a vessel: A cylinder not manufactured, inspected, tested and marked in accordance with part 178 of this subchapter, or a cylinder manufactured to other than a UN standard, DOT specification, exemption or special permit, may be filled with a gas in the United States and offered for transportation and transported for export or alternatively, for use on board a vessel, if the following conditions are met:</P> <P>(i) The cylinder has been requalified and marked with the month and year of requalification in accordance with subpart C of part 180 of this subchapter, or has been requalified as authorized by the Associate Administrator;</P> <P>(ii) In addition to other requirements of this subchapter, the maximum filling ensity, service pressure, and pressure relief device for each cylinder conform to the requirements of this part for the gas involved; and</P> <P>(iii) The bill of lading or other shipping paper identifies the cylinder and includes the following certification: “This cylinder has (These cylinders have) been qualified, as required, and filled in accordance with the DOT requirements for export.”</P> <P>(5) Cylinders not equipped with pressure relief devices: A DOT specification or a UN cylinder manufactured, inspected, tested and marked in accordance with part 178 of this subchapter and otherwise conforms to the requirements of part 173 for the gas involved, except that the cylinder is not equipped with a pressure relief device may be filled with a gas and offered for transportation and transported for export if the following conditions are met:</P> <P>(i) Each DOT specification cylinder or UN pressure receptacle must be plainly and durably marked “For Export Only”;</P> <P>(ii) The shipping paper must carry the following certification: “This cylinder has (These cylinders have) been retested and refilled in accordance with the DOT requirements for export.”; and</P> <P>(iii) The emergency response information provided with the shipment and available from the emergency response telephone contact person must indicate that the pressure receptacles are not fitted with pressure relief devices and provide appropriate guidance for exposure to fire.<PRTPAGE P="119"/> </P> <P>(b) <E T="03">Conditions and requirements specific to certain materials</E>—(1) <E T="03">Aerosols</E>. Except for a limited quantity of a compressed gas in a container of not more than 4 fluid ounces capacity meeting the requirements in § 173.306(a)(1) of this subchapter, the proper shipping name “Aerosol,” UN1950, may be used only for a non-refillable receptacle containing a gas compressed, liquefied, or dissolved under pressure the sole purpose of which is to expel a nonpoisonous (other than Division 6.1, Packing Group III material) liquid, paste, or powder and fitted with a self-closing release device (see § 171.8). In addition, an aerosol must be in a metal packaging when the packaging exceeds 7.22 cubic inches.</P> <P>(2) <E T="03">Air bag inflator, air bag module and seat-belt pretensioner</E>. For each approved air bag inflator, air bag module and seat-belt pretensioner, the shipping paper description must conform to the requirements in § 173.166(c) of this subchapter.</P> <P>(i) The EX number or product code must be included in association with the basic shipping description. When a product code is used, it must be traceable to the specific EX number assigned to the inflator, module or seat-belt pretensioner by the Associate Administrator. The EX number or product code is not required to be marked on the outside package.</P> <P>(ii) The proper shipping name “Articles, pyrotechnic <E T="03">for technical purposes</E>, UN0431” must be used for all air bag inflators, air bag modules, and seat-belt pretensioners meeting the criteria for a Division 1.4G material.</P> <P>(3) <E T="03">Chemical oxygen generators</E>. Chemical oxygen generators must be approved, classed, described, packaged, and transported in accordance with the requirements of this subchapter.</P> <P>(4) <E T="03">Class 1 (explosive) materials</E>. Prior to being transported, Class 1 (explosive) materials must be approved by the Associate Administrator in accordance with § 173.56 of this subchapter. Each package containing a Class 1 (explosive) material must conform to the marking requirements in § 172.320 of this subchapter.</P> <P>(5) <E T="03">Hazardous substances.</E> A material meeting the definition of a hazardous substance as defined in § 171.8, must conform to the shipping paper requirements in § 172.203(c) of this subchapter and the marking requirements in § 172.324 of this subchapter:</P> <P>(i) The proper shipping name must identify the hazardous substance by name, or the name of the substance must be entered in parentheses in association with the basic description and marked on the package in association with the proper shipping name. If the hazardous substance meets the definition for a hazardous waste, the waste code (for example, D001), may be used to identify the hazardous substance;</P> <P>(ii) The shipping paper and the package markings must identify at least two hazardous substances with the lowest reportable quantities (RQs) when the material contains two or more hazardous substances; and</P> <P>(iii) The letters “RQ” must be entered on the shipping paper either before or after the basic description, and marked on the package in association with the proper shipping name for each hazardous substance listed.</P> <P>(6) <E T="03">Hazardous wastes</E>. A material meeting the definition of a hazardous waste (see § 171.8) must conform to the following:</P> <P>(i) The shipping paper and the package markings must include the word “Waste” immediately preceding the proper shipping name;</P> <P>(ii) The shipping paper must be retained by the shipper and by each carrier for three years after the material is accepted by the initial carrier (see § 172.205(e)(5)); and</P> <P>(iii) A hazardous waste manifest must be completed in accordance with § 172.205 of this subchapter.</P> <P>(7) <E T="03">Marine pollutants</E>. Except for marine pollutants (see § 171.8) transported in accordance with the IMDG Code, marine pollutants transported in bulk packages must meet the shipping paper requirements in § 172.203(l) of this subchapter and the package marking requirements in § 172.322 of this subchapter.</P> <P>(8) <E T="03">Organic peroxides</E>. Organic peroxides not identified by technical name in the Organic Peroxide Table in § 173.225(b) of this subchapter must be approved by the Associate Administrator in accordance with § 173.128(d) of this subchapter.<PRTPAGE P="120"/> </P> <P>(9) <E T="03">Poisonous materials, Division 6.1</E>. Division 6.1 hazardous materials transported as limited quantities are not excepted from labeling (see § 173.153(b)).</P> <P>(10) <E T="03">Poisonous by inhalation materials</E>. A material poisonous by inhalation (see § 171.8) must conform to the following requirements:</P> <P>(i) The words “Poison-Inhalation Hazard” or “Toxic-Inhalation Hazard” and the words “Zone A,” “Zone B,” “Zone C,” or “Zone D” for gases, or “Zone A” or “Zone B” for liquids, as appropriate, must be entered on the shipping paper immediately following the basic shipping description. The word “Poison” or “Toxic” or the phrase “Poison-Inhalation Hazard” or “Toxic-Inhalation Hazard” need not be repeated if it otherwise appears in the shipping description;</P> <P>(ii) The material must be packaged in accordance with the requirements of this subchapter;</P> <P>(iii) The package must be marked in accordance with § 172.313 of this subchapter; and</P> <P>(iv) Except as provided in subparagraph (B) of this paragraph (b)(10)(iv) and for a package containing anhydrous ammonia prepared in accordance with the Transport Canada TDG Regulations, the package must be labeled or placarded with POISON INHALATION HAZARD or POISON GAS, as appropriate, in accordance with Subparts E and F of part 172 of this subchapter.</P> <P>(A) For a package transported in accordance with the IMDG Code in a closed transport vehicle or freight container, a label or placard conforming to the IMDG Code specifications for a “Class 2.3” or “Class 6.1” label or placard may be substituted for the POISON GAS or POISON INHALATION HAZARD label or placard, as appropriate. The transport vehicle or freight container must be marked with the identification numbers for the hazardous material, regardless of the total quantity contained in the transport vehicle or freight container, in the manner specified in § 172.313(c) of this subchapter and placarded as required by subpart F of part 172 of this subchapter.</P> <P>(B) For a package transported in accordance with the Transport Canada TDG Regulations in a closed transport vehicle or freight container, a label or placard conforming to the TDG Regulations specifications for a “Class 2.3” or “Class 6.1” label or placard may be substituted for the POISON GAS or POISON INHALATION HAZARD label or placard, as appropriate. The transport vehicle or freight container must be marked with the identification numbers for the hazardous material, regardless of the total quantity contained in the transport vehicle or freight container, in the manner specified in § 172.313(c) of this subchapter and placarded as required by subpart F of part 172 of this subchapter. While in transportation in the United States, the transport vehicle or freight container may also be placarded in accordance with the appropriate Transport Canada TDG Regulations in addition to being placarded with the POISON GAS or POISON INHALATION HAZARD placards.</P> <P>(11) <E T="03">Class 7 (radioactive) materials</E>. (i) Highway route controlled quantities (see § 173.403 of this subchapter) must be shipped in accordance with §§ 172.203(d)(4) and (d)(10); 172.507, and 173.22(c) of this subchapter;</P> <P>(ii) For fissile materials and Type B, Type B(U), and Type B(M) packagings, the competent authority certification and any necessary revalidation must be obtained from the appropriate competent authorities as specified in §§ 173.471, 173.472, and 173.473 of this subchapter, and all requirements of the certificates and revalidations must be met;</P> <P>(iii) Type A package contents are limited in accordance with § 173.431 of this subchapter;</P> <P>(iv) The country of origin for the shipment must have adopted the edition of TS-R-1 of the IAEA Regulations referenced in § 171.7;</P> <P>(v) The shipment must conform to the requirements of § 173.448, when applicable;</P> <P>(vi) The definition for “radioactive material” in § 173.403 of this subchapter must be applied to radioactive materials transported under the provisions of this subpart;</P> <P>(vii) Except for limited quantities, the shipment must conform to the requirements of § 172.204(c)(4) of this subchapter; and<PRTPAGE P="121"/> </P> <P>(viii) Excepted packages of radioactive material, instruments or articles, or articles containing natural uranium or thorium must conform to the requirements of §§ 173.421, 173.424, or 173.426 of this subchapter, as appropriate.</P> <P>(12) <E T="03">Self-reactive materials</E>. Self-reactive materials not identified by technical name in the Self-reactive Materials Table in § 173.224(b) of this subchapter must be approved by the Associate Administrator in accordance with § 173.124(a)(2)(iii) of this subchapter.</P> <CITA>[72 FR 25172, May 3, 2007, as amended at 72 FR 55684, Oct. 1, 2007; 73 FR 57004, Oct. 1, 2008]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.24</SECTNO> <SUBJECT>Additional requirements for the use of the ICAO Technical Instructions.</SUBJECT> <P>(a) A hazardous material that is offered for transportation or transported within the United States by aircraft, and by motor vehicle or rail either before or after being transported by aircraft in accordance with the ICAO Technical Instructions (IBR, see § 171.7), as authorized in paragraph (a) of § 171.22, must conform to the requirements in § 171.22, as applicable, and this section.</P> <P>(b) Any person who offers for transportation or transports a hazardous material in accordance with the ICAO Technical Instructions must comply with the following additional conditions and requirements:</P> <P>(1) All applicable requirements in parts 171 and 175 of this subchapter (also see 14 CFR 121.135, 121.401, 121.433a, 135.323, 135.327 and 135.333);</P> <P>(2) The quantity limits prescribed in the ICAO Technical Instructions for transportation by passenger-carrying or cargo aircraft, as applicable;</P> <P>(3) The conditions or requirements of a United States variation, when specified in the ICAO Technical Instructions.</P> <P>(c) <E T="03">Highway transportation</E>. For transportation by highway prior to or after transportation by aircraft, a shipment must conform to the applicable requirements of part 177 of this subchapter, and the motor vehicle must be placarded in accordance with subpart F of part 172.</P> <P>(d) <E T="03">Conditions and requirements specific to certain materials</E>. Hazardous materials offered for transportation or transported in accordance with the ICAO Technical Instructions must conform to the following specific conditions and requirements, as applicable:</P> <P>(1) <E T="03">Batteries</E>—(i) <E T="03">Nonspillable wet electric storage batteries</E>. Nonspillable wet electric storage batteries are not subject to the requirements of this subchapter provided—</P> <P>(A) The battery meets the conditions specified in Special Provision 67 of the ICAO Technical Instructions;</P> <P>(B) The battery, its outer packaging, and any overpack are plainly and durably marked “NONSPILLABLE” or “NONSPILLABLE BATTERY”; and</P> <P>(C) The batteries or battery assemblies are offered for transportation or transported in a manner that prevents short circuiting or forced discharge, including, but not limited to, protection of exposed terminals.</P> <P>(ii) <E T="03">Primary lithium batteries and cells.</E> Primary lithium batteries and cells are forbidden for transportation aboard passenger-carrying aircraft. Equipment containing or packed with primary lithium batteries or cells are forbidden for transport aboard passenger-carrying aircraft except as provided in § 172.102, Special Provision A101 of this subchapter. When transported aboard cargo-only aircraft, packages containing primary lithium batteries and cells transported in accordance with Special Provision A45 of the ICAO Technical Instructions must be marked “PRIMARY LITHIUM BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT” or “LITHIUM METAL BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT.” This marking is not required on packages that contain 5 kg (11 pounds) net weight or less of primary lithium batteries or cells that are contained in or packed with equipment.</P> <P>(iii) <E T="03">Prototype lithium batteries and cells</E>. Prototype lithium batteries and cells are forbidden for transport aboard passenger aircraft and must be approved by the Associate Administrator prior to transportation aboard cargo aircraft, in accordance with the requirements of Special Provision A55 in § 172.102 of this subchapter.<PRTPAGE P="122"/> </P> <P>(2) A package containing Oxygen, compressed, or any of the following oxidizing gases must be packaged as required by Parts 173 and 178 of this subchapter: carbon dioxide and oxygen mixtures, compressed; compressed gas, oxidizing, n.o.s.; liquefied gas, oxidizing, n.o.s.; nitrogen trifluoride; and nitrous oxide.</P> <CITA>[72 FR 25172, May 3, 2007, as amended at 72 FR 44847, Aug. 9, 2007; 72 FR 55097, Sept. 28, 2007]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.25</SECTNO> <SUBJECT>Additional requirements for the use of the IMDG Code.</SUBJECT> <P>(a) A hazardous material may be offered for transportation or transported to, from or within the United States by vessel, and by motor carrier and rail in accordance with the IMDG Code (IBR, see § 171.7), as authorized in § 171.22, provided all or part of the movement is by vessel. Such shipments must conform to the requirements in § 171.22, as applicable, and this section.</P> <P>(b) Any person who offers for transportation or transports a hazardous material in accordance with the IMDG Code must conform to the following additional conditions and requirements:</P> <P>(1) Unless otherwise excepted, a shipment must conform to the requirements in part 176 of this subchapter. For transportation by rail or highway prior to or subsequent to transportation by vessel, a shipment must conform to the applicable requirements of parts 174 and 177 respectively, of this subchapter, and the motor vehicle or rail car must be placarded in accordance with subpart F of part 172 of this subchapter. When a hazardous material regulated by this subchapter for transportation by highway is transported by motor vehicle on a public highway or by rail under the provisions of subpart C of part 171, the segregation requirements of Part 7, Chapter 7.2 of the IMDG Code are authorized.</P> <P>(2) For transportation by vessel, the stowage and segregation requirements in Part 7 of the IMDG Code may be substituted for the stowage and segregation requirements in part 176 of this subchapter.</P> <P>(3) Packages containing primary lithium batteries and cells that are transported in accordance with Special Provision 188 of the IMDG Code must be marked “PRIMARY LITHIUM BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT” or “LITHIUM METAL BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT.” This marking is not required on packages that contain 5 kg (11 pounds) net weight or less of primary lithium batteries and cells that are contained in or packed with equipment.</P> <P>(c) <E T="03">Conditions and requirements for bulk packagings</E>. Except for IBCs and UN portable tanks used for the transportation of liquids or solids, bulk packagings must conform to the requirements of this subchapter. Additionally, the following requirements apply:</P> <P>(1) UN portable tanks must conform to the requirements in Special Provisions TP37, TP38, TP44 and TP45 when applicable, and any applicable bulk special provisions assigned to the hazardous material in the Hazardous Materials Table in § 172.101 of this subchapter;</P> <P>(2) IMO Type 5 portable tanks must conform to DOT Specification 51 or UN portable tank requirements, unless specifically authorized in this subchapter or approved by the Associate Administrator;</P> <P>(3) Except as specified in this subpart, for a material poisonous (toxic) by inhalation, the T Codes specified in Column 13 of the Dangerous Goods List in the IMDG Code may be applied to the transportation of those materials in IM, IMO and DOT Specification 51 portable tanks, when these portable tanks are authorized in accordance with the requirements of this subchapter; and</P> <P>(4) No person may offer an IM or UN portable tank containing liquid hazardous materials of Class 3, PG I or II, or PG III with a flash point less than 100 °F (38 °C); Division 5.1, PG I or II; or Division 6.1, PG I or II, for unloading while it remains on a transport vehicle with the motive power unit attached, unless it conforms to the requirements in § 177.834(o) of this subchapter.</P> <P>(5) Effective February 13, 2009, portable tanks, cargo tanks, and tank cars containing cryogenic liquids must be stowed “on deck” regardless of the <PRTPAGE P="123"/>stowage authorized in the IMDG Code. Cargo tanks or tank cars containing cryogenic liquids may be stowed one deck below the weather deck when transported on a trailership or trainship that is unable to provide “on deck” stowage because of the vessel's design. Tank cars must be Class DOT-113 or AAR-204W tank cars. Portable tanks, cargo tanks, and tank cars containing cryogenic liquids that are in transportation and stowed below deck on or before February 13, 2009 may continue to be transported to their final destination.</P> <P>(d) <E T="03">Use of IMDG Code in port areas</E>. (1) Except for Division 1.1, 1.2, and Class 7 materials, a hazardous material being imported into or exported from the United States or passing through the United States in the course of being shipped between locations outside the United States may be offered and accepted for transportation and transported by motor vehicle within a single port area, including contiguous harbors, when packaged, marked, classed, labeled, stowed and segregated in accordance with the IMDG Code, offered and accepted in accordance with the requirements of subparts C and F of part 172 of this subchapter pertaining to shipping papers and placarding, and otherwise conforms to the applicable requirements of part 176 of this subchapter.</P> <P>(2) The requirement in § 172.201(d) of this subchapter for an emergency telephone number does not apply to shipments made in accordance with the IMDG Code if the hazardous material is not offloaded from the vessel, or is offloaded between ocean vessels at a U.S. port facility without being transported by public highway.</P> <P>(3) Notwithstanding § 171.25(d)(1), except for portable tanks, cargo tanks, and tank cars transporting cryogenic liquids before February 13, 2009. Effective February 13, 2009, portable tanks, cargo tanks, and tank cars containing cryogenic liquids, which are transported by a vessel passing through the United States in the course of being shipped between locations outside of the United States must be stowed “on deck” regardless of the stowage authorized in the IMDG Code. Cargo tanks or tank cars containing cryogenic liquids may be stowed one deck below the weather deck when transported on a trailership or trainship that is unable to provide “on deck” stowage because of the vessel's design. Tank cars must be Class DOT-113 or AAR-204W tank cars. Portable tanks, cargo tanks, and tank cars containing cryogenic liquids that are in transportation and stowed below deck on or before February 13, 2009, may continue to be transported to their final destination.</P> <CITA>[72 FR 25172, May 3, 2007, as amended at 72 FR 44847, Aug. 9, 2007; 73 FR 57004, Oct. 1, 2008; 74 FR 2233, Jan. 14, 2009]</CITA> </SECTION> <SECTION> <SECTNO>§ 171.26</SECTNO> <SUBJECT>Additional requirements for the use of the IAEA Regulations.</SUBJECT> <P>A Class 7 (radioactive) material being imported into or exported from the United States or passing through the United States in the course of being shipped between places outside the United States may be offered for transportation or transported in accordance with the IAEA Regulations (IBR, see § 171.7) as authorized in paragraph (a) of § 171.22, provided the requirements in § 171.22, as applicable, are met.</P> </SECTION> </SUBPART> </PART> <PART> <EAR>Pt. 172</EAR> <HD SOURCE="HED">PART 172—HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS</HD> <CONTENTS> <SUBPART> <HD SOURCE="HED">Subpart A—General</HD> <SECHD>Sec.</SECHD> <SECTNO>172.1</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>172.3</SECTNO> <SUBJECT>Applicability.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Table of Hazardous Materials and Special Provisions</HD> <SECTNO>172.101</SECTNO> <SUBJECT>Purpose and use of hazardous materials table.</SUBJECT> <SECTNO>172.102</SECTNO> <SUBJECT>Special provisions.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart C—Shipping Papers</HD> <SECTNO>172.200</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>172.201</SECTNO> <SUBJECT>Preparation and retention of shipping papers.</SUBJECT> <SECTNO>172.202</SECTNO> <SUBJECT>Description of hazardous material on shipping papers.</SUBJECT> <SECTNO>172.203</SECTNO> <SUBJECT>Additional description requirements.</SUBJECT> <SECTNO>172.204</SECTNO> <SUBJECT>Shipper's certification.<PRTPAGE P="124"/> </SUBJECT> <SECTNO>172.205</SECTNO> <SUBJECT>Hazardous waste manifest.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart D—Marking</HD> <SECTNO>172.300</SECTNO> <SUBJECT>Applicability.</SUBJECT> <SECTNO>172.301</SECTNO> <SUBJECT>General marking requirements for non-bulk packagings.</SUBJECT> <SECTNO>172.302</SECTNO> <SUBJECT>General marking requirements for bulk packagings.</SUBJECT> <SECTNO>172.303</SECTNO> <SUBJECT>Prohibited marking.</SUBJECT> <SECTNO>172.304</SECTNO> <SUBJECT>Marking requirements.</SUBJECT> <SECTNO>172.306</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>172.308</SECTNO> <SUBJECT>Authorized abbreviations.</SUBJECT> <SECTNO>172.310</SECTNO> <SUBJECT>Class 7 (radioactive) materials.</SUBJECT> <SECTNO>172.312</SECTNO> <SUBJECT>Liquid hazardous materials in non-bulk packagings.</SUBJECT> <SECTNO>172.313</SECTNO> <SUBJECT>Poisonous hazardous materials.</SUBJECT> <SECTNO>172.315</SECTNO> <SUBJECT>Packages containing limited quantities.</SUBJECT> <SECTNO>172.316</SECTNO> <SUBJECT>Packagings containing materials classed as ORM-D.</SUBJECT> <SECTNO>172.317</SECTNO> <SUBJECT>KEEP AWAY FROM HEAT handling mark.</SUBJECT> <SECTNO>172.320</SECTNO> <SUBJECT>Explosive hazardous materials.</SUBJECT> <SECTNO>172.322</SECTNO> <SUBJECT>Marine pollutants.</SUBJECT> <SECTNO>172.323</SECTNO> <SUBJECT>Infectious substances.</SUBJECT> <SECTNO>172.324</SECTNO> <SUBJECT>Hazardous substances in non-bulk packagings.</SUBJECT> <SECTNO>172.325</SECTNO> <SUBJECT>Elevated temperature materials.</SUBJECT> <SECTNO>172.326</SECTNO> <SUBJECT>Portable tanks.</SUBJECT> <SECTNO>172.328</SECTNO> <SUBJECT>Cargo tanks.</SUBJECT> <SECTNO>172.330</SECTNO> <SUBJECT>Tank cars and multi-unit tank car tanks.</SUBJECT> <SECTNO>172.331</SECTNO> <SUBJECT>Bulk packagings other than portable tanks, cargo tanks, tank cars and multi-unit tank car tanks.</SUBJECT> <SECTNO>172.332</SECTNO> <SUBJECT>Identification number markings.</SUBJECT> <SECTNO>172.334</SECTNO> <SUBJECT>Identification numbers; prohibited display.</SUBJECT> <SECTNO>172.336</SECTNO> <SUBJECT>Identification numbers; special provisions.</SUBJECT> <SECTNO>172.338</SECTNO> <SUBJECT>Replacement of identification numbers.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart E—Labeling</HD> <SECTNO>172.400</SECTNO> <SUBJECT>General labeling requirements.</SUBJECT> <SECTNO>172.400a</SECTNO> <SUBJECT>Exceptions from labeling.</SUBJECT> <SECTNO>172.401</SECTNO> <SUBJECT>Prohibited labeling.</SUBJECT> <SECTNO>172.402</SECTNO> <SUBJECT>Additional labeling requirements.</SUBJECT> <SECTNO>172.403</SECTNO> <SUBJECT>Class 7 (radioactive) material.</SUBJECT> <SECTNO>172.404</SECTNO> <SUBJECT>Labels for mixed and consolidated packaging.</SUBJECT> <SECTNO>172.405</SECTNO> <SUBJECT>Authorized label modifications.</SUBJECT> <SECTNO>172.406</SECTNO> <SUBJECT>Placement of labels.</SUBJECT> <SECTNO>172.407</SECTNO> <SUBJECT>Label specifications.</SUBJECT> <SECTNO>172.411</SECTNO> <SUBJECT>EXPLOSIVE 1.1, 1.2, 1.3, 1.4, 1.5 and 1.6 labels, and EXPLOSIVE Subsidiary label.</SUBJECT> <SECTNO>172.415</SECTNO> <SUBJECT>NON-FLAMMABLE GAS label.</SUBJECT> <SECTNO>172.416</SECTNO> <SUBJECT>POISON GAS label.</SUBJECT> <SECTNO>172.417</SECTNO> <SUBJECT>FLAMMABLE GAS label.</SUBJECT> <SECTNO>172.419</SECTNO> <SUBJECT>FLAMMABLE LIQUID label.</SUBJECT> <SECTNO>172.420</SECTNO> <SUBJECT>FLAMMABLE SOLID label.</SUBJECT> <SECTNO>172.422</SECTNO> <SUBJECT>SPONTANEOUSLY COMBUSTIBLE label.</SUBJECT> <SECTNO>172.423</SECTNO> <SUBJECT>DANGEROUS WHEN WET label.</SUBJECT> <SECTNO>172.426</SECTNO> <SUBJECT>OXIDIZER label.</SUBJECT> <SECTNO>172.427</SECTNO> <SUBJECT>ORGANIC PEROXIDE label.</SUBJECT> <SECTNO>172.429</SECTNO> <SUBJECT>POISON INHALATION HAZARD label.</SUBJECT> <SECTNO>172.430</SECTNO> <SUBJECT>POISON label.</SUBJECT> <SECTNO>172.431</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>172.432</SECTNO> <SUBJECT>INFECTIOUS SUBSTANCE label.</SUBJECT> <SECTNO>172.436</SECTNO> <SUBJECT>RADIOACTIVE WHITE-I label.</SUBJECT> <SECTNO>172.438</SECTNO> <SUBJECT>RADIOACTIVE YELLOW-II label.</SUBJECT> <SECTNO>172.440</SECTNO> <SUBJECT>RADIOACTIVE YELLOW-III label.</SUBJECT> <SECTNO>172.441</SECTNO> <SUBJECT>FISSILE label.</SUBJECT> <SECTNO>172.442</SECTNO> <SUBJECT>CORROSIVE label.</SUBJECT> <SECTNO>172.444</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>172.446</SECTNO> <SUBJECT>CLASS 9 label.</SUBJECT> <SECTNO>172.448</SECTNO> <SUBJECT>CARGO AIRCRAFT ONLY label.</SUBJECT> <SECTNO>172.450</SECTNO> <SUBJECT>EMPTY label.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart F—Placarding</HD> <SECTNO>172.500</SECTNO> <SUBJECT>Applicability of placarding requirements.</SUBJECT> <SECTNO>172.502</SECTNO> <SUBJECT>Prohibited and permissive placarding.</SUBJECT> <SECTNO>172.503</SECTNO> <SUBJECT>Identification number display on placards.</SUBJECT> <SECTNO>172.504</SECTNO> <SUBJECT>General placarding requirements.</SUBJECT> <SECTNO>172.505</SECTNO> <SUBJECT>Placarding for subsidiary hazards.</SUBJECT> <SECTNO>172.506</SECTNO> <SUBJECT>Providing and affixing placards: Highway.</SUBJECT> <SECTNO>172.507</SECTNO> <SUBJECT>Special placarding provisions: Highway.</SUBJECT> <SECTNO>172.508</SECTNO> <SUBJECT>Placarding and affixing placarding: Rail.</SUBJECT> <SECTNO>172.510</SECTNO> <SUBJECT>Special placarding provisions: Rail.</SUBJECT> <SECTNO>172.512</SECTNO> <SUBJECT>Freight containers and aircraft unit load devices.</SUBJECT> <SECTNO>172.514</SECTNO> <SUBJECT>Bulk packagings.</SUBJECT> <SECTNO>172.516</SECTNO> <SUBJECT>Visibility and display of placards.</SUBJECT> <SECTNO>172.519</SECTNO> <SUBJECT>General specifications for placards.</SUBJECT> <SECTNO>172.521</SECTNO> <SUBJECT>DANGEROUS placard.</SUBJECT> <SECTNO>172.522</SECTNO> <SUBJECT>EXPLOSIVES 1.1, EXPLOSIVES 1.2 and EXPLOSIVES 1.3 placards.</SUBJECT> <SECTNO>172.523</SECTNO> <SUBJECT>EXPLOSIVES 1.4 placard.</SUBJECT> <SECTNO>172.524</SECTNO> <SUBJECT>EXPLOSIVES 1.5 placard.</SUBJECT> <SECTNO>172.525</SECTNO> <SUBJECT>EXPLOSIVES 1.6 placard.</SUBJECT> <SECTNO>172.526</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>172.527</SECTNO> <SUBJECT>Background requirements for certain placards.</SUBJECT> <SECTNO>172.528</SECTNO> <SUBJECT>NON-FLAMMABLE GAS placard.</SUBJECT> <SECTNO>172.530</SECTNO> <SUBJECT>OXYGEN placard.</SUBJECT> <SECTNO>172.532</SECTNO> <SUBJECT>FLAMMABLE GAS placard.</SUBJECT> <SECTNO>172.536</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>172.540</SECTNO> <SUBJECT>POISON GAS placard.</SUBJECT> <SECTNO>172.542</SECTNO> <SUBJECT>FLAMMABLE placard.</SUBJECT> <SECTNO>172.544</SECTNO> <SUBJECT>COMBUSTIBLE placard.</SUBJECT> <SECTNO>172.546</SECTNO> <SUBJECT>FLAMMABLE SOLID placard.</SUBJECT> <SECTNO>172.547</SECTNO> <SUBJECT>SPONTANEOUSLY COMBUSTIBLE placard.</SUBJECT> <SECTNO>172.548</SECTNO> <SUBJECT>DANGEROUS WHEN WET placard.</SUBJECT> <SECTNO>172.550</SECTNO> <SUBJECT>OXIDIZER placard.</SUBJECT> <SECTNO>172.552</SECTNO> <SUBJECT>ORGANIC PEROXIDE placard.</SUBJECT> <SECTNO>172.553</SECTNO> <SUBJECT>[Reserved]</SUBJECT> <SECTNO>172.554</SECTNO> <SUBJECT>POISON placard.</SUBJECT> <SECTNO>172.555</SECTNO> <SUBJECT>POISON INHALATION HAZARD placard.</SUBJECT> <SECTNO>172.556</SECTNO> <SUBJECT>RADIOACTIVE placard.</SUBJECT> <SECTNO>172.558</SECTNO> <SUBJECT>CORROSIVE placard.<PRTPAGE P="125"/> </SUBJECT> <SECTNO>172.560</SECTNO> <SUBJECT>CLASS 9 placard.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart G—Emergency Response Information</HD> <SECTNO>172.600</SECTNO> <SUBJECT>Applicability and general requirements.</SUBJECT> <SECTNO>172.602</SECTNO> <SUBJECT>Emergency response information.</SUBJECT> <SECTNO>172.604</SECTNO> <SUBJECT>Emergency response telephone number.</SUBJECT> <SECTNO>172.606</SECTNO> <SUBJECT>Carrier information contact.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart H—Training</HD> <SECTNO>172.700</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <SECTNO>172.701</SECTNO> <SUBJECT>Federal-State relationship.</SUBJECT> <SECTNO>172.702</SECTNO> <SUBJECT>Applicability and responsibility for training and testing.</SUBJECT> <SECTNO>172.704</SECTNO> <SUBJECT>Training requirements.</SUBJECT> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart I—Safety and Security Plans</HD> <SECTNO>172.800</SECTNO> <SUBJECT>Purpose and applicability.</SUBJECT> <SECTNO>172.802</SECTNO> <SUBJECT>Components of a security plan.</SUBJECT> <SECTNO>172.804</SECTNO> <SUBJECT>Relationship to other Federal requirements.</SUBJECT> <SECTNO>172.820</SECTNO> <SUBJECT>Additional planning requirements for transportation by rail.</SUBJECT> <SECTNO>172.822</SECTNO> <SUBJECT>Limitation on actions by states, local governments, and Indian tribes.</SUBJECT> <APP>Appendix A to Part 172—Office of Hazardous Materials Transportation Color Tolerance Charts and Tables</APP> <APP>Appendix B to Part 172—Trefoil Symbol</APP> <APP>Appendix C to Part 172—Dimensional Specifications for Recommended Placard Holder</APP> <APP>Appendix D to Part 172—Rail Risk Analysis Factors</APP> </SUBPART> </CONTENTS> <AUTH> <HD SOURCE="HED">Authority:</HD> <P>49 U.S.C. 5101-5128, 44701; 49 CFR 1.53.</P> </AUTH> <SOURCE> <HD SOURCE="HED">Source:</HD> <P>Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, unless otherwise noted.</P> </SOURCE> <SUBPART> <HD SOURCE="HED">Subpart A—General</HD> <SECTION> <SECTNO>§ 172.1</SECTNO> <SUBJECT>Purpose and scope.</SUBJECT> <P>This part lists and classifies those materials which the Department has designated as hazardous materials for purposes of transportation and prescribes the requirements for shipping papers, package marking, labeling, and transport vehicle placarding applicable to the shipment and transportation of those hazardous materials.</P> <CITA>[Amdt. 172-29, 41 FR 15997, Apr. 15, 1976, as amended by 66 FR 45379, Aug. 28, 2001]</CITA> </SECTION> <SECTION> <SECTNO>§ 172.3</SECTNO> <SUBJECT>Applicability.</SUBJECT> <P>(a) This part applies to—</P> <P>(1) Each person who offers a hazardous material for transportation, and</P> <P>(2) Each carrier by air, highway, rail, or water who transports a hazardous material.</P> <P>(b) When a person, other than one of those provided for in paragraph (a) of this section, performs a packaging labeling or marking function required by this part, that person shall perform the function in accordance with this part.</P> <CITA>[Amdt. 172-29, 41 FR 15996, Apr. 15, 1976, as amended by Amdt. 172-32, 41 FR 38179, Sept. 9, 1976]</CITA> </SECTION> </SUBPART> <SUBPART> <HD SOURCE="HED">Subpart B—Table of Hazardous Materials and Special Provisions</HD> <SECTION> <SECTNO>§ 172.101</SECTNO> <SUBJECT>Purpose and use of hazardous materials table.</SUBJECT> <P>(a) The Hazardous Materials Table (Table) in this section designates the materials listed therein as hazardous materials for the purpose of transportation of those materials. For each listed material, the Table identifies the hazard class or specifies that the material is forbidden in transportation, and gives the proper shipping name or directs the user to the preferred proper shipping name. In addition, the Table specifies or references requirements in this subchapter pertaining to labeling, packaging, quantity limits aboard aircraft and stowage of hazardous materials aboard vessels.</P> <P>(b) <E T="03">Column 1: Symbols.</E> Column 1 of the Table contains six symbols (“+”, “A”, “D”, “G”, “I” and “W”) as follows:</P> <P>(1) The plus (+) sign fixes the proper shipping name, hazard class and packing group for that entry without regard to whether the material meets the definition of that class, packing group or any other hazard class definition. When the plus sign is assigned to a proper shipping name in Column (1) of the § 172.101 Table, it means that the material is known to pose a risk to humans. When a plus sign is assigned to mixtures or solutions containing a material where the hazard to humans is significantly different from that of the pure material or where no hazard to humans is posed, the material may be described using an alternative shipping name that represents the hazards posed by the material. An appropriate alternate proper shipping name and hazard class may be authorized by the Associate Administrator.<PRTPAGE P="126"/> </P> <P>(2) The letter “A” denotes a material that is subject to the requirements of this subchapter only when offered or intended for transportation by aircraft, unless the material is a hazardous substance or a hazardous waste. A shipping description entry preceded by an “A” may be used to describe a material for other modes of transportation provided all applicable requirements for the entry are met.</P> <P>(3) The letter “D” identifies proper shipping names which are appropriate for describing materials for domestic transportation but may be inappropriate for international transportation under the provisions of international regulations (e.g., IMO, ICAO). An alternate proper shipping name may be selected when either domestic or international transportation is involved.</P> <P>(4) The letter “G” identifies proper shipping names for which one or more technical names of the hazardous material must be entered in parentheses, in association with the basic description. (See § 172.203(k).)</P> <P>(5) The letter “I” identifies proper shipping names which are appropriate for describing materials in international transportation. An alternate proper shipping name may be selected when only domestic transportation is involved.</P> <P>(6) The letter “W” denotes a material that is subject to the requirements of this subchapter only when offered or intended for transportation by vessel, unless the material is a hazardous substance or a hazardous waste. A shipping description entry preceded by a “W” may be used to describe a material for other modes of transportation provided all applicable requirements for the entry are met.</P> <P>(c) <E T="03">Column 2: Hazardous materials descriptions and proper shipping names.</E> Column 2 lists the hazardous materials descriptions and proper shipping names of materials designated as hazardous materials. Modification of a proper shipping name may otherwise be required or authorized by this section. Proper shipping names are limited to those shown in Roman type (not italics).</P> <P>(1) Proper shipping names may be used in the singular or plural and in either capital or lower case letters. Words may be alternatively spelled in the same manner as they appear in the ICAO Technical Instructions or the IMDG Code. For example “aluminum” may be spelled “aluminium” and “sulfur” may be spelled “sulphur”. However, the word “inflammable” may not be used in place of the word “flammable”.</P> <P>(2) Punctuation marks and words in italics are not part of the proper shipping name, but may be used in addition to the proper shipping name. The word “or” in italics indicates that terms in the sequence may be used as the proper shipping name, as appropriate.</P> <P>(3) The word “poison” or “poisonous” may be used interchangeably with the word “toxic” when only domestic transportation is involved. The abbreviation “n.o.i.” or “n.o.i.b.n.” may be used interchangeably with “n.o.s.”.</P> <P>(4) Except for hazardous wastes, when qualifying words are used as part of the proper shipping name, their sequence in the package markings and shipping paper description is optional. However, the entry in the Table reflects the preferred sequence.</P> <P>(5) When one entry references another entry by use of the word “see”, if both names are in Roman type, either name may be used as the proper shipping name (e.g., Ethyl alcohol, <E T="03">see</E> Ethanol).</P> <P>(6) When a proper shipping name includes a concentration range as part of the shipping description, the actual concentration, if it is within the range stated, may be used in place of the concentration range. For example, an aqueous solution of hydrogen peroxide containing 30 percent peroxide may be described as “Hydrogen peroxide, aqueous solution <E T="03">with not less than 20 percent but not more than 40 percent hydrogen peroxide”</E> or “Hydrogen peroxide, aqueous solution <E T="03">with 30 percent hydrogen peroxide”.</E> </P> <P>(7) Use of the prefix “mono” is optional in any shipping name, when appropriate. Thus, Iodine monochloride may be used interchangeably with Iodine chloride. In “Glycerol alpha-monochlorohydrin” the term “mono” is considered a prefix to the term “chlorohydrin” and may be deleted.</P> <P>(8) Use of the word “liquid” or “solid”. The word “liquid” or “solid” <PRTPAGE P="127"/>may be added to a proper shipping name when a hazardous material specifically listed by name may, due to differing physical states, be a liquid or solid. When the packaging specified in Column 8 is inappropriate for the physical state of the material, the table provided in paragraph (i)(4) of this section should be used to determine the appropriate packaging section.</P> <P>(9) <E T="03">Hazardous wastes.</E> If the word “waste” is not included in the hazardous material description in Column 2 of the Table, the proper shipping name for a hazardous waste (as defined in § 171.8 of this subchapter), shall include the word “Waste” preceding the proper shipping name of the material. For example: Waste acetone.</P> <P>(10) <E T="03">Mixtures and solutions.</E> (i) A mixture or solution not identified specifically by name, comprised of a hazardous material identified in the Table by technical name and non-hazardous material, shall be described using the proper shipping name of the hazardous material and the qualifying word “mixture” or “solution”, as appropriate, unless—</P> <P>(A) Except as provided in § 172.101(i)(4) the packaging specified in Column 8 is inappropriate to the physical state of the material;</P> <P>(B) The shipping description indicates that the proper shipping name applies only to the pure or technically pure hazardous material;</P> <P>(C) The hazard class, packing group, or subsidiary hazard of the mixture or solution is different from that specified for the entry;</P> <P>(D) There is a significant change in the measures to be taken in emergencies;</P> <P>(E) The material is identified by special provision in Column 7 of the § 172.101 Table as a material poisonous by inhalation; however, it no longer meets the definition of poisonous by inhalation or it falls within a different hazard zone than that specified in the special provision; or</P> <P>(F) The material can be appropriately described by a shipping name that describes its intended application, such as “Coating solution”, “Extracts, flavoring” or “Compound, cleaning liquid”.</P> <P>(ii) If one or more of the conditions specified in paragraph (c)(10)(i) of this section is satisfied, then a proper shipping name shall be selected as prescribed in paragraph (c)(12)(ii) of this section.</P> <P>(iii) A mixture or solution not identified in the Table specifically by name, comprised of two or more hazardous materials in the same hazard class, shall be described using an appropriate shipping description (e.g., “Flammable liquid, n.o.s.”). The name that most appropriately describes the material shall be used; e.g., an alcohol not listed by its technical name in the Table shall be described as “Alcohol, n.o.s.” rather than “Flammable liquid, n.o.s.”. Some mixtures may be more appropriately described according to their application, such as “Coating solution” or “Extracts, flavoring liquid” rather than by an n.o.s. entry. Under the provisions of subparts C and D of this part, the technical names of at least two components most predominately contributing to the hazards of the mixture or solution may be required in association with the proper shipping name.</P> <P>(11) Except for a material subject to or prohibited by § 173.21, 173.54, 173.56(d), 173.56(e), 173.224(c) or 173.225(b) of this subchapter, a material that is considered to be a hazardous waste or a sample of a material for which the hazard class is uncertain and must be determined by testing may be assigned a tentative proper shipping name, hazard class, identification number and packing group, if applicable, based on the shipper's tentative determination according to:</P> <P>(i) Defining criteria in this subchapter;</P> <P>(ii) The hazard precedence prescribed in § 173.2a of this subchapter;</P> <P>(iii) The shipper's knowledge of the material;</P> <P>(iv) In addition to paragraphs (c)(11)(i) through (iii) of this section, for a sample of a material other than a waste, the following must be met:</P> <P>(A) Except when the word “Sample” already appears in the proper shipping name, the word “Sample” must appear as part of the proper shipping name or in association with the basic description on the shipping paper.<PRTPAGE P="128"/> </P> <P>(B) When the proper shipping description for a sample is assigned a “G” in Column (1) of the § 172.101 Table, and the primary constituent(s) for which the tentative classification is based are not known, the provisions requiring a technical name for the constituent(s) do not apply; and</P> <P>(C) A sample must be transported in a combination packaging that conforms to the requirements of this subchapter that are applicable to the tentative packing group assigned, and may not exceed a net mass of 2.5 kg (5.5 pounds) per package. </P> <NOTE> <HD SOURCE="HED">Note to paragraph (<E T="01">c</E>)(11):</HD> <P>For the transportation of samples of self-reactive materials, organic peroxides, explosives or lighters, <E T="03">see</E> §§ 173.224(c)(3), 173.225(c)(2), 173.56(d) or 173.308(b)(2) of this subchapter, respectively.</P> </NOTE> <P>(12) Except when the proper shipping name in the Table is preceded by a plus (+)—</P> <P>(i) If it is specifically determined that a material meets the definition of a hazard class, packing group or hazard zone, other than the class, packing group or hazard zone shown in association with the proper shipping name, or does not meet the defining criteria for a subsidiary hazard shown in Column 6 of the Table, the material shall be described by an appropriate proper shipping name listed in association with the correct hazard class, packing group, hazard zone, or subsidiary hazard for the material.</P> <P>(ii) <E T="03">Generic or n.o.s. descriptions.</E> If an appropriate technical name is not shown in the Table, selection of a proper shipping name shall be made from the generic or n.o.s. descriptions corresponding to the specific hazard class, packing group, hazard zone, or subsidiary hazard, if any, for the material. The name that most appropriately describes the material shall be used; e.g., an alcohol not listed by its technical name in the Table shall be described as “Alcohol, n.o.s.” rather than “Flammable liquid, n.o.s.”. Some mixtures may be more appropriately described according to their application, such as “Coating solution” or “Extracts, flavoring, liquid”, rather than by an n.o.s. entry, such as “Flammable liquid, n.o.s.” It should be noted, however, that an n.o.s. description as a proper shipping name may not provide sufficient information for shipping papers and package markings. Under the provisions of subparts C and D of this part, the technical name of one or more constituents which makes the product a hazardous material may be required in association with the proper shipping name.</P> <P>(iii) <E T="03">Multiple hazard materials.</E> If a material meets the definition of more than one hazard class, and is not identified in the Table specifically by name (e.g., acetyl chloride), the hazard class of the material shall be determined by using the precedence specified in § 173.2a of this subchapter, and an appropriate shipping description (e.g., “Flammable liquid, corrosive n.o.s.”) shall be selected as described in paragraph (c)(12)(ii) of this section.</P> <P>(iv) If it is specifically determined that a material is not a forbidden material and does not meet the definition of any hazard class, the material is not a hazardous material.</P> <P>(13) <E T="03">Self-reactive materials and organic peroxides.</E> A generic proper shipping name for a self-reactive material or an organic peroxide, as listed in Column 2 of the Table, must be selected based on the material's technical name and concentration, in accordance with the provisions of §§ 173.224 or 173.225 of this subchapter, respectively.</P> <P>(14) A proper shipping name that describes all isomers of a material may be used to identify any isomer of that material if the isomer meets criteria for the same hazard class or division, subsidiary risk(s) and packing group, unless the isomer is specifically identified in the Table.</P> <P>(15) Unless a hydrate is specifically listed in the Table, a proper shipping name for the equivalent anhydrous substance may be used, if the hydrate meets the same hazard class or division, subsidiary risk(s) and packing group.</P> <P>(16) Unless it is already included in the proper shipping name in the § 172.101 Table, the qualifying words “liquid” or “solid” may be added in association with the proper shipping name when a hazardous material specifically listed by name in the § 172.101 Table may, due to the differing physical states of the various isomers of the <PRTPAGE P="129"/>material, be either a liquid or a solid (for example “Dinitrotoluenes, liquid” and “Dinitrotoluenes, solid”). Use of the words “liquid” or “solid” is subject to the limitations specified for the use of the words “mixture” or “solution” in paragraph (c)(10) of this section. The qualifying word “molten” may be added in association with the proper shipping name when a hazardous material, which is a solid in accordance with the definition in § 171.8 of this subchapter, is offered for transportation in the molten state (for example, “Alkylphenols, solid, n.o.s., molten”).</P> <P>(d) <E T="03">Column 3: Hazard class or Division.</E> Column 3 contains a designation of the hazard class or division corresponding to each proper shipping name, or the word “Forbidden”.</P> <P>(1) A material for which the entry in this column is “Forbidden” may not be offered for transportation or transported. This prohibition does not apply if the material is diluted, stabilized or incorporated in a device and it is classed in accordance with the definitions of hazardous materials contained in part 173 of this subchapter.</P> <P>(2) When a reevaluation of test data or new data indicates a need to modify the “Forbidden” designation or the hazard class or packing group specified for a material specifically identified in the Table, this data should be submitted to the Associate Administrator.</P> <P>(3) A basic description of each hazard class and the section reference for class definitions appear in § 173.2 of this subchapter.</P> <P>(4) Each reference to a Class 3 material is modified to read “Combustible liquid” when that material is reclassified in accordance with § 173.150(e) or (f) of this subchapter or has a flash point above 60 °C (140 °F) but below 93 °C (200 °F).</P> <P>(e) <E T="03">Column 4: Identification number.</E> Column 4 lists the identification number assigned to each proper shipping name. Those preceded by the letters “UN” are associated with proper shipping names considered appropriate for international transportation as well as domestic transportation. Those preceded by the letters “NA” are associated with proper shipping names not recognized for international transportation, except to and from Canada. Identification numbers in the “NA9000” series are associated with proper shipping names not appropriately covered by international hazardous materials (dangerous goods) transportation standards, or not appropriately addressed by international transportation standards for emergency response information purposes, except for transportation between the United States and Canada.</P> <P>(f) <E T="03">Column 5: Packing group.</E> Column 5 specifies one or more packing groups assigned to a material corresponding to the proper shipping name and hazard class for that material. Class 2, Class 7, Division 6.2 (other than regulated medical wastes), and ORM-D materials, do not have packing groups. Packing Groups I, II and III indicate the degree of danger presented by the material is either great, medium or minor, respectively. If more than one packing group is indicated for an entry, the packing group for the hazardous material is determined using the criteria for assignment of packing groups specified in subpart D of part 173. When a reevaluation of test data or new data indicates a need to modify the specified packing group(s), the data should be submitted to the Associate Administrator. Each reference in this column to a material which is a hazardous waste or a hazardous substance, and whose proper shipping name is preceded in Column 1 of the Table by the letter “A” or “W”, is modified to read “III” on those occasions when the material is offered for transportation or transported by a mode in which its transportation is not otherwise subject to requirements of this subchapter.</P> <P>(g) <E T="03">Column 6: Labels.</E> Column 6 specifies codes which represent the hazard warning labels required for a package filled with a material conforming to the associated hazard class and proper shipping name, unless the package is otherwise excepted from labeling by a provision in subpart E of this part, or part 173 of this subchapter. The first code is indicative of the primary hazard of the material. Additional label codes are indicative of subsidiary hazards. Provisions in § 172.402 may require that a label other than that specified in Column 6 be affixed to the package in addition to that specified in Column <PRTPAGE P="130"/>6. No label is required for a material classed as a combustible liquid or for a Class 3 material that is reclassed as a combustible liquid. For “Empty” label requirements, see § 173.428 of this subchapter. The codes contained in Column 6 are defined according to the following table:</P> <GPOTABLE CDEF="xs85,r25" COLS="2" OPTS="L2"> <TTITLE>Label Substitution Table</TTITLE> <BOXHD> <CHED H="1">Label code</CHED> <CHED H="1">Label name</CHED> </BOXHD> <ROW> <ENT I="01">1</ENT> <ENT>Explosive</ENT> </ROW> <ROW> <ENT I="01">1.1 <SU>1</SU> </ENT> <ENT>Explosive 1.1<SU>1</SU> </ENT> </ROW> <ROW> <ENT I="01">1.2 <SU>1</SU> </ENT> <ENT>Explosive 1.2<SU>1</SU> </ENT> </ROW> <ROW> <ENT I="01">1.3 <SU>1</SU> </ENT> <ENT>Explosive 1.3<SU>1</SU> </ENT> </ROW> <ROW> <ENT I="01">1.4 <SU>1</SU> </ENT> <ENT>Explosive 1.4<SU>1</SU> </ENT> </ROW> <ROW> <ENT I="01">1.5 <SU>1</SU> </ENT> <ENT>Explosive 1.5<SU>1</SU> </ENT> </ROW> <ROW> <ENT I="01">1.6 <SU>1</SU> </ENT> <ENT>Explosive 1.6<SU>1</SU> </ENT> </ROW> <ROW> <ENT I="01">2.1</ENT> <ENT>Flammable Gas</ENT> </ROW> <ROW> <ENT I="01">2.2</ENT> <ENT>Non-Flammable Gas</ENT> </ROW> <ROW> <ENT I="01">2.3</ENT> <ENT>Poison Gas</ENT> </ROW> <ROW> <ENT I="01">3</ENT> <ENT>Flammable Liquid</ENT> </ROW> <ROW> <ENT I="01">4.1</ENT> <ENT>Flammable Solid</ENT> </ROW> <ROW> <ENT I="01">4.2</ENT> <ENT>Spontaneously Combustible</ENT> </ROW> <ROW> <ENT I="01">4.3</ENT> <ENT>Dangerous When Wet</ENT> </ROW> <ROW> <ENT I="01">5.1</ENT> <ENT>Oxidizer</ENT> </ROW> <ROW> <ENT I="01">5.2</ENT> <ENT>Organic Peroxide</ENT> </ROW> <ROW> <ENT I="01">6.1 (inhalation hazard, Zone A or B)</ENT> <ENT>Poison Inhalation Hazard</ENT> </ROW> <ROW> <ENT I="01">6.1 (other than inhalation hazard, Zone A or B) <SU>2</SU> </ENT> <ENT>Poison</ENT> </ROW> <ROW> <ENT I="01">6.2</ENT> <ENT>Infectious substance</ENT> </ROW> <ROW> <ENT I="01">7</ENT> <ENT>Radioactive</ENT> </ROW> <ROW> <ENT I="01">8</ENT> <ENT>Corrosive</ENT> </ROW> <ROW> <ENT I="01">9</ENT> <ENT>Class 9</ENT> </ROW> <TNOTE> <SU>1</SU> Refers to the appropriate compatibility group letter.</TNOTE> <TNOTE> <SU>2</SU> The packing group for a material is indicated in column 5 of the table.</TNOTE> </GPOTABLE> <P>(h) <E T="03">Column 7: Special provisions.</E> Column 7 specifies codes for special provisions applicable to hazardous materials. When Column 7 refers to a special provision for a hazardous material, the meaning and requirements of that special provision are as set forth in § 172.102 of this subpart.</P> <P>(i) <E T="03">Column 8: Packaging authorizations.</E> Columns 8A, 8B and 8C specify the applicable sections for exceptions, non-bulk packaging requirements and bulk packaging requirements, respectively, in part 173 of this subchapter. Columns 8A, 8B and 8C are completed in a manner which indicates that “§ 173.” precedes the designated numerical entry. For example, the entry “202” in Column 8B associated with the proper shipping name “Gasoline” indicates that for this material conformance to non-bulk packaging requirements prescribed in § 173.202 of this subchapter is required. When packaging requirements are specified, they are in addition to the standard requirements for all packagings prescribed in § 173.24 of this subchapter and any other applicable requirements in subparts A and B of part 173 of this subchapter.</P> <P>(1) Exceptions. Column 8A contains exceptions from some of the requirements of this subchapter. The referenced exceptions are in addition to those specified in subpart A of part 173 and elsewhere in this subchapter. A “None” in this column means no packaging exceptions are authorized, except as may be provided by special provisions in Column 7.</P> <P>(2) Non-bulk packaging. Column 8B references the section in part 173 of this subchapter which prescribes packaging requirements for non-bulk packagings. A “None” in this column means non-bulk packagings are not authorized, except as may be provided by special provisions in Column 7. Each reference in this column to a material which is a hazardous waste or a hazardous substance, and whose proper shipping name is preceded in Column 1 of the Table by the letter “A” or “W”, is modified to include “§ 173.203” or “§ 173.213”, as appropriate for liquids and solids, respectively, on those occasions when the material is offered for transportation or transported by a mode in which its transportation is not otherwise subject to the requirements of this subchapter.</P> <P>(3) <E T="03">Bulk packaging.</E> Column (8C) specifies the section in part 173 of this subchapter that prescribes packaging requirements for bulk packagings, subject to the limitations, requirements, and additional authorizations of Columns (7) and (8B). A “None” in Column (8C) means bulk packagings are not authorized, except as may be provided by special provisions in Column (7) and in packaging authorizations Column (8B). Additional authorizations and limitations for use of UN portable tanks are set forth in Column 7. For each reference in this column to a material that is a hazardous waste or a hazardous substance, and whose proper shipping name is preceded in Column 1 of the Table by the letter “A” or “W” and that is offered for transportation or transported by a mode in which its transportation is not otherwise subject to the requirements of this subchapter:<PRTPAGE P="131"/> </P> <P>(4) For a hazardous material which is specifically named in the Table and whose packaging sections specify packagings not applicable to the form of the material (e.g., packaging specified is for solid material and the material is being offered for transportation in a liquid form) the following table should be used to determine the appropriate packaging section:</P> <GPOTABLE CDEF="s25,20" COLS="2" OPTS="L2"> <BOXHD> <CHED H="1">Packaging section reference for solid materials</CHED> <CHED H="1">Corresponding packaging section for liquid materials</CHED> </BOXHD> <ROW> <ENT I="01">§ 173.187</ENT> <ENT>§ 173.181</ENT> </ROW> <ROW> <ENT I="01">§ 173.211</ENT> <ENT>§ 173.201</ENT> </ROW> <ROW> <ENT I="01">§ 173.212</ENT> <ENT>§ 173.202</ENT> </ROW> <ROW> <ENT I="01">§ 173.213</ENT> <ENT>§ 173.203</ENT> </ROW> <ROW> <ENT I="01">§ 173.240</ENT> <ENT>§ 173.241</ENT> </ROW> <ROW> <ENT I="01">§ 173.242</ENT> <ENT>§ 173.243</ENT> </ROW> </GPOTABLE> <P>(5) <E T="03">Cylinders.</E> For cylinders, both non-bulk and bulk packaging authorizations are set forth in Column (8B). Notwithstanding a designation of “None” in Column (8C), a bulk cylinder may be used when specified through the section reference in Column (8B).</P> <P>(j) <E T="03">Column 9: Quantity limitations.</E> Columns 9A and 9B specify the maximum quantities that may be offered for transportation in one package by passenger-carrying aircraft or passenger-carrying rail car (Column 9A) or by cargo aircraft only (Column 9B), subject to the following:</P> <P>(1) “Forbidden” means the material may not be offered for transportation or transported in the applicable mode of transport.</P> <P>(2) The quantity limitation is “net” except where otherwise specified, such as for “Consumer commodity” which specifies “30 kg gross.”</P> <P>(3) When articles or devices are specifically listed by name, the net quantity limitation applies to the entire article or device (less packaging and packaging materials) rather than only to its hazardous components.</P> <P>(4) A package offered or intended for transportation by aircraft and which is filled with a material forbidden on passenger-carrying aircraft but permitted on cargo aircraft only, or which exceeds the maximum net quantity authorized on passenger-carrying aircraft, shall be labelled with the CARGO AIRCRAFT ONLY label specified in § 172.448 of this part.</P> <P>(5) The total net quantity of hazardous material for an outer non-bulk packaging that contains more than one hazardous material may not exceed the lowest permitted maximum net quantity per package as shown in Column 9A or 9B, as appropriate. If one material is a liquid and one is a solid, the maximum net quantity must be calculated in kilograms. <E T="03">See</E> § 173.24a(c)(1)(iv).</P> <P>(k) <E T="03">Column 10: Vessel stowage requirements.</E> Column 10A [Vessel stowage] specifies the authorized stowage locations on board cargo and passenger vessels. Column 10B [Other provisions] specifies codes for stowage requirements for specific hazardous materials. The meaning of each code in Column 10B is set forth in § 176.84 of this subchapter. Section 176.63 of this subchapter sets forth the physical requirements for each of the authorized locations listed in Column 10A. (For bulk transportation by vessel, see 46 CFR parts 30 to 40, 70, 98, 148, 151, 153 and 154.) The authorized stowage locations specified in Column 10A are defined as follows:</P> <P>(1) Stowage category “A” means the material may be stowed “on deck” or “under deck” on a cargo vessel and on a passenger vessel.</P> <P>(2) Stowage category “B” means—</P> <P>(i) The material may be stowed “on deck” or “under deck” on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length; and</P> <P>(ii) “On deck only” on passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this section is exceeded.</P> <P>(3) Stowage category “C” means the material must be stowed “on deck only” on a cargo vessel and on a passenger vessel.</P> <P>(4) Stowage category “D” means the material must be stowed “on deck only” on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers or one passenger per each 3 m of overall vessel length, but the material is prohibited on passenger vessels in which the limiting number of passengers is exceeded.<PRTPAGE P="132"/> </P> <P>(5) Stowage category “E” means the material may be stowed “on deck” or “under deck” on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length, but is prohibited from carriage on passenger vessels in which the limiting number of passengers is exceeded.</P> <P>(6) Stowage category “01” means the material may be stowed “on deck” or “under deck” on a cargo vessel (up to 12 passengers) and on a passenger vessel.</P> <P>(7) Stowage category “02” means the material may be stowed “on deck” or “under deck” on a cargo vessel (up to 12 passengers) and “on deck” in closed cargo transport units or “under deck” in closed cargo transport units on a passenger vessel.</P> <P>(8) Stowage category “03” means the material may be stowed “on deck” or “under deck” on a cargo vessel (up to 12 passengers) and “on deck” in closed cargo transport units on a passenger vessel.</P> <P>(9) Stowage category “04” means the material may be stowed “on deck” or “under deck” on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel.</P> <P>(10) Stowage category “05” means the material may be stowed “on deck” in closed cargo transport units or “under deck” on a cargo vessel (up to 12 passengers) and on a passenger vessel.</P> <P>(11) Stowage category “06” means the material may be stowed “on deck” in closed cargo transport units or “under deck” on a cargo vessel (up to 12 passengers) and “on deck” in closed cargo transport units or “under deck” in closed cargo transport units on a passenger vessel.</P> <P>(12) Stowage category “07” means the material may be stowed “on deck” in closed cargo transport units or “under deck” on a cargo vessel (up to 12 passengers) and “on deck” only in closed cargo transport units on a passenger vessel.</P> <P>(13) Stowage category “08” means the material may be stowed “on deck” in closed cargo transport units or “under deck” on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel.</P> <P>(14) Stowage category “09” means the material may be stowed “on deck only” in closed cargo transport units or “under deck” in closed cargo transport units on a cargo vessel (up to 12 passengers) and on a passenger vessel.</P> <P>(15) Stowage category “10” means the material may be stowed “on deck” in closed cargo transport units or “under deck” in closed cargo transport units on a cargo vessel (up to 12 passengers) and “on deck” only in closed cargo transport units on a passenger vessel.</P> <P>(16) Stowage category “11” means the material may be stowed “on deck” in closed cargo transport units or “under deck” in magazine stowage type “c” on a cargo vessel (up to 12 passengers) and “on deck” only in closed cargo transport units on a passenger vessel.</P> <P>(17) Stowage category “12” means the material may be stowed “on deck” in closed cargo transport units or “under deck” in magazine stowage type “c” on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel.</P> <P>(18) Stowage category “13” means the material may be stowed “on deck” in closed cargo transport units or “under deck” in magazine stowage type “A” on a cargo vessel (up to 12 passengers) and “on deck” only in closed cargo transport units on a passenger vessel.</P> <P>(19) Stowage category “14” means the material may be stowed “on deck” in closed cargo transport units on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel.</P> <P>(20) Stowage category “15” means the material may be stowed “on deck” in closed cargo transport units or “under deck” in closed cargo transport units on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel.</P> <P>(l) <E T="03">Changes to the Table.</E> (1) Unless specifically stated otherwise in a rule document published in the <E T="04">Federal Register</E> amending the Table—</P> <P>(i) Such a change does not apply to the shipment of any package filled prior to the effective date of the amendment; and</P> <P>(ii) Stocks of preprinted shipping papers and package markings may be continued in use, in the manner previously authorized, until depleted or <PRTPAGE P="133"/>for a one-year period, subsequent to the effective date of the amendment, whichever is less.</P> <P>(2) Except as otherwise provided in this section, any alteration of a shipping description or associated entry which is listed in the § 172.101 Table must receive prior written approval from the Associate Administrator.</P> <P>(3) The proper shipping name of a hazardous material changed in the May 6, 1997 final rule, in effect on October 1, 1997, only by the addition or omission of the word “compressed,” “inhibited,” “liquefied” or “solution” may continue to be used to comply with package marking requirements, until January 1, 2003.<PRTPAGE P="134"/> </P> <GPOTABLE CDEF="2,r75,8,xls24,4,xs19,20,xs22,xs19,xs19,9,9,xls16,6" COLS="14" OPTS="L2(4,0,4)"> <TTITLE>§ 172.101 Hazardous Materials Table</TTITLE> <BOXHD> <CHED H="1">Symbols</CHED> <CHED H="1">Hazardous materials descriptions and proper shipping names</CHED> <CHED H="1">Hazard class or Division</CHED> <CHED H="1">Identification Numbers</CHED> <CHED H="1">PG</CHED> <CHED H="1">Label Codes</CHED> <CHED H="1">Special provisions<LI>(§ 172.102)</LI> </CHED> <CHED H="1">(8)</CHED> <CHED H="2">Packaging<LI>(§ 173.***)</LI> </CHED> <CHED H="3">Exceptions</CHED> <CHED H="3">Non-bulk</CHED> <CHED H="3">Bulk</CHED> <CHED H="1">(9)</CHED> <CHED H="2">Quantity limitations<LI>(see §§ 173.27 and 175.75)</LI> </CHED> <CHED H="3">Passenger aircraft/rail</CHED> <CHED H="3">Cargo aircraft only</CHED> <CHED H="1">(10)<LI>Vessel </LI> <LI>stowage</LI> </CHED> <CHED H="2">Location</CHED> <CHED H="2">Other</CHED> </BOXHD> <ROW RUL="s"> <ENT I="25">(1)</ENT> <ENT>(2)</ENT> <ENT>(3)</ENT> <ENT>(4)</ENT> <ENT>(5)</ENT> <ENT>(6)</ENT> <ENT>(7)</ENT> <ENT>(8A)</ENT> <ENT>(8B)</ENT> <ENT>(8C)</ENT> <ENT>(9A)</ENT> <ENT>(9B)</ENT> <ENT>(10A)</ENT> <ENT>(10B) </ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Accellerene, see</E> p-Nitrosodimethylaniline</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Accumulators, electric, see</E> Batteries, wet <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Accumulators, pressurized, pneumatic or hydraulic (containing non-flamable gas), see</E> Articles pressurized, pneumatic <E T="03">or</E> hydraulic (containing non-flamable gas)</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetal</ENT> <ENT>3</ENT> <ENT>UN1088</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetaldehyde</ENT> <ENT>3</ENT> <ENT>UN1089</ENT> <ENT>I</ENT> <ENT>3</ENT> <ENT>A3, B16, T11, TP2, TP7</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> A</ENT> <ENT>Acetaldehyde ammonia</ENT> <ENT>9</ENT> <ENT>UN1841</ENT> <ENT>III</ENT> <ENT>9</ENT> <ENT>IB8, IP3, IP7, T1, TP33</ENT> <ENT>155</ENT> <ENT>204</ENT> <ENT>240</ENT> <ENT>200 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>34</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acetaldehyde oxime</ENT> <ENT>3</ENT> <ENT>UN2332</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T4, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetic acid, glacial <E T="03">or</E> Acetic acid solution, <E T="03">with more than 80 percent acid, by mass</E> </ENT> <ENT>8</ENT> <ENT>UN2789</ENT> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>A3, A6, A7, A10, B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetic acid solution, <E T="03">not less than 50 percent but not more than 80 percent acid, by mass</E> </ENT> <ENT>8</ENT> <ENT>UN2790</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>A3, A6, A7, A10, B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetic acid solution, <E T="03">with more than 10 percent and less than 50 percent acid, by mass</E> </ENT> <ENT>8</ENT> <ENT>UN2790</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetic anhydride</ENT> <ENT>8</ENT> <ENT>UN1715</ENT> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>A3, A6, A7, A10, B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acetone</ENT> <ENT>3</ENT> <ENT>UN1090</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetone cyanohydrin, stabilized</ENT> <ENT>6.1</ENT> <ENT>UN1541</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>2, B9, B14, B32, B76, B77, N34, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>25, 40, 52, 53</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acetone oils</ENT> <ENT>3</ENT> <ENT>UN1091</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1, TP8</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetonitrile</ENT> <ENT>3</ENT> <ENT>UN1648</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetyl acetone peroxide with more than 9 percent by mass active oxygen</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetyl benzoyl peroxide, solid, or with more than 40 percent in solution</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetyl bromide</ENT> <ENT>8</ENT> <ENT>UN1716</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T8, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <PRTPAGE P="135"/> <ENT I="01"/> <ENT>Acetyl chloride</ENT> <ENT>3</ENT> <ENT>UN1717</ENT> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>A3, A6, A7, IB1, N34, T8, TP2</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetyl cyclohexanesulfonyl peroxide, with more than 82 percent wetted with less than 12 percent water</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acetyl iodide</ENT> <ENT>8</ENT> <ENT>UN1898</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T7, TP2, TP13</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acetyl methyl carbinol</ENT> <ENT>3</ENT> <ENT>UN2621</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetyl peroxide, solid, or with more than 25 percent in solution</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Acetylene, dissolved</ENT> <ENT>2.1</ENT> <ENT>UN1001</ENT> <ENT/> <ENT>2.1</ENT> <ENT>N86, N88</ENT> <ENT>None</ENT> <ENT>303</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>D</ENT> <ENT>25, 40, 57</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetylene (liquefied)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetylene silver nitrate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetylene, solvent free</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acetylene tetrabromide, see</E> Tetrabromoethane</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Acid butyl phosphate, see</E> Butyl acid phosphate</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acid, sludge, <E T="03">see</E> Sludge acid</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acridine</ENT> <ENT>6.1</ENT> <ENT>UN2713</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Acrolein dimer, stabilized</ENT> <ENT>3</ENT> <ENT>UN2607</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acrolein, stabilized</ENT> <ENT>6.1</ENT> <ENT>UN1092</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>1, B9, B14, B30, B42, B77, T22, TP2, TP7, TP13, TP38, TP44</ENT> <ENT>None</ENT> <ENT>226</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acrylamide, solid</ENT> <ENT>6.1</ENT> <ENT>UN2074</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>12</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acrylamide solution</ENT> <ENT>6.1</ENT> <ENT>UN3426</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>12</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acrylic acid, stabilized</ENT> <ENT>8</ENT> <ENT>UN2218</ENT> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>25, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Acrylonitrile, stabilized</ENT> <ENT>3</ENT> <ENT>UN1093</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>B9, T14, TP2, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Actuating cartridge, explosive, see</E> Cartridges, power device</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Adhesives, <E T="03">containing a flammable liquid</E> </ENT> <ENT>3</ENT> <ENT>UN1133</ENT> <ENT>I</ENT> <ENT>3</ENT> <ENT>T11, TP1, TP8, TP27</ENT> <ENT>150</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>3</ENT> <ENT>149, B52, IB2, T4, TP1, TP8</ENT> <ENT>150</ENT> <ENT>173</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, B52, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>173</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Adiponitrile</ENT> <ENT>6.1</ENT> <ENT>UN2205</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T3, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Aerosols, <E T="03">corrosive, Packing Group II or III, (each not exceeding 1 L capacity)</E> </ENT> <ENT>2.2</ENT> <ENT>UN1950</ENT> <ENT/> <ENT>2.2, 8</ENT> <ENT>A34</ENT> <ENT>306</ENT> <ENT>None</ENT> <ENT>None</ENT> <ENT>75 kg</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> <ENT>48, 87, 126</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Aerosols, <E T="03">flammable, (each not exceeding 1 L capacity)</E> </ENT> <ENT>2.1</ENT> <ENT>UN1950</ENT> <ENT/> <ENT>2.1</ENT> <ENT>N82</ENT> <ENT>306</ENT> <ENT>None</ENT> <ENT>None</ENT> <ENT>75 kg</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> <ENT>48, 87, 126</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Aerosols, flammable, n.o.s. <E T="03">(engine starting fluid) (each not exceeding 1 L capacity)</E> </ENT> <ENT>2.1</ENT> <ENT>UN1950</ENT> <ENT/> <ENT>2.1</ENT> <ENT>N82</ENT> <ENT>306</ENT> <ENT>304</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> <ENT>48, 87, 126</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Aerosols, <E T="03">non-flammable,(each not exceeding 1 L capacity)</E> </ENT> <ENT>2.2</ENT> <ENT>UN1950</ENT> <ENT/> <ENT>2.2</ENT> <ENT/> <ENT>306</ENT> <ENT>None</ENT> <ENT>None</ENT> <ENT>75 kg</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> <ENT>48, 87, 126.</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aerosols, <E T="03">poison, (each not exceeding 1 L capacity)</E> </ENT> <ENT>2.2</ENT> <ENT>UN1950</ENT> <ENT/> <ENT>2.2, 6.1</ENT> <ENT/> <ENT>306</ENT> <ENT>None</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>A</ENT> <ENT>48, 87, 126</ENT> </ROW> <ROW> <ENT I="01"> I</ENT> <ENT>Air bag inflators, <E T="03">or</E> Air bag modules, <E T="03">or</E> Seat-belt pretensioners.</ENT> <ENT>1.4G</ENT> <ENT>UN0503</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT>161</ENT> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>02</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="136"/> <ENT I="01"/> <ENT>Air bag inflators, <E T="03">or</E> Air bag modules, <E T="03">or</E> Seat-belt pretensioners.</ENT> <ENT>9</ENT> <ENT>UN3268</ENT> <ENT>III</ENT> <ENT>9</ENT> <ENT>160</ENT> <ENT>166</ENT> <ENT>166</ENT> <ENT>166</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Air, compressed</ENT> <ENT>2.2</ENT> <ENT>UN1002</ENT> <ENT/> <ENT>2.2</ENT> <ENT>78</ENT> <ENT>306, 307</ENT> <ENT>302</ENT> <ENT>302</ENT> <ENT>75 kg</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Air, refrigerated liquid, <E T="03">(cryogenic liquid)</E> </ENT> <ENT>2.2</ENT> <ENT>UN1003</ENT> <ENT/> <ENT>2.2, 5.1</ENT> <ENT>T75, TP5, TP22</ENT> <ENT>320</ENT> <ENT>316</ENT> <ENT>318, 319</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>51</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Air, refrigerated liquid, <E T="03">(cryogenic liquid) non-pressurized</E> </ENT> <ENT>2.2</ENT> <ENT>UN1003</ENT> <ENT/> <ENT>2.2, 5.1</ENT> <ENT>T75, TP5, TP22</ENT> <ENT>320</ENT> <ENT>316</ENT> <ENT>318, 319</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>51</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aircraft engines (including turbines), see</E> Engines, internal combustion</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aircraft evacuation slides, see</E> Life saving appliances <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aircraft hydraulic power unit fuel tank <E T="03">(containing a mixture of anhydrous hydrazine and monomethyl hydrazine) (M86 fuel)</E> </ENT> <ENT>3</ENT> <ENT>UN3165</ENT> <ENT>I</ENT> <ENT>3, 6.1, 8</ENT> <ENT/> <ENT>None</ENT> <ENT>172</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>42 L</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aircraft survival kits, see</E> Life saving appliances <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Alcoholates solution, n.o.s., <E T="03">in alcohol</E> </ENT> <ENT>3</ENT> <ENT>UN3274</ENT> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>IB2</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alcoholic beverages</ENT> <ENT>3</ENT> <ENT>UN3065</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>24, 149, B1, IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>24, B1, IB3, N11, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Alcohols, n.o.s.</ENT> <ENT>3</ENT> <ENT>UN1987</ENT> <ENT>I</ENT> <ENT>3</ENT> <ENT>172, T11, TP1, TP8, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>E</ENT> </ROW> <ROW> <ENT I="22" O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>II</ENT> <ENT>3</ENT> <ENT>172, IB2, T7, TP1, TP8, TP28</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> </ROW> <ROW> <ENT I="22" O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>III</ENT> <ENT>3</ENT> <ENT>172, B1, IB3, T4, TP1, TP29</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A.</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Alcohols, flammable, toxic n.o.s</ENT> <ENT>3</ENT> <ENT>UN1986</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T11, TP2, TP27</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="22"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>III</ENT> <ENT>3, 6.1</ENT> <ENT>B1, IB3, T7, TP1, TP28</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aldehydes, n.o.s.</ENT> <ENT>3</ENT> <ENT>UN1989</ENT> <ENT>I</ENT> <ENT>3</ENT> <ENT>T11, TP1, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T7, TP1, TP8, TP28</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T4, TP1, TP29</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Aldehydes, flammable, toxic, n.o.s.</ENT> <ENT>3</ENT> <ENT>UN1988</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T11, TP2, TP27</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <PRTPAGE P="137"/> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3, 6.1</ENT> <ENT>B1, IB3, T7, TP1, TP28</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aldol</ENT> <ENT>6.1</ENT> <ENT>UN2839</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>12</ENT> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Alkali metal alcoholates, self-heating, corrosive, n.o.s.</ENT> <ENT>4.2</ENT> <ENT>UN3206</ENT> <ENT>II</ENT> <ENT>4.2, 8</ENT> <ENT>64, A7, IB5, IP2, T3, TP33</ENT> <ENT>None</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>4.2, 8</ENT> <ENT>64, A7, IB8, IP3, T1, TP33</ENT> <ENT>None</ENT> <ENT>213</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkali metal alloys, liquid, n.o.s.</ENT> <ENT>4.3</ENT> <ENT>UN1421</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A2, A3, A7, B48, N34</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>1 L</ENT> <ENT>D</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Alkali metal amalgam, liquid</ENT> <ENT>4.3</ENT> <ENT>UN1389</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A2, A3, A7, N34</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>1 L</ENT> <ENT>D</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Alkali metal amalgam, solid</ENT> <ENT>4.3</ENT> <ENT>UN3401</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>IB4, IP1, N40, T9, TP7, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>D</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Alkali metal amides</ENT> <ENT>4.3</ENT> <ENT>UN1390</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>A6, A7, A8, A19, A20, IB7, IP2, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>241</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>E</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Alkali metal dispersions, <E T="03">or</E> Alkaline earth metal dispersions</ENT> <ENT>4.3</ENT> <ENT>UN1391</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A2, A3, A7</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>1 L</ENT> <ENT>D</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Alkaline corrosive liquids, n.o.s., see</E> Caustic alkali liquids, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Alkaline earth metal alcoholates, n.o.s.</ENT> <ENT>4.2</ENT> <ENT>UN3205</ENT> <ENT>II</ENT> <ENT>4.2</ENT> <ENT>65, A7, IB6, IP2, T3, TP33</ENT> <ENT>None</ENT> <ENT>212</ENT> <ENT>241</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>4.2</ENT> <ENT>65, A7, IB8, IP3, T1, TP33</ENT> <ENT>None</ENT> <ENT>213</ENT> <ENT>241</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkaline earth metal alloys, n.o.s.</ENT> <ENT>4.3</ENT> <ENT>UN1393</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>A19, IB7, IP2, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>241</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>E</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Alkaline earth metal amalgams, liquid</ENT> <ENT>4.3</ENT> <ENT>UN1392</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A19, N34, N40</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>1 L</ENT> <ENT>E</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Alkaline earth metal amalgams, solid</ENT> <ENT>4.3</ENT> <ENT>UN3402</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A19, N34, N40, T9, TP7, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>D</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Alkaloids, liquid, n.o.s., <E T="03">or</E> Alkaloid salts, liquid, n.o.s.</ENT> <ENT>6.1</ENT> <ENT>UN3140</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>A4, T14, TP2, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T11, TP2, TP27</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T7, TP1, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Alkaloids, solid, n.o.s. <E T="03">or</E> Alkaloid salts, solid, n.o.s. <E T="03">poisonous</E> </ENT> <ENT>6.1</ENT> <ENT>UN1544</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkyl sulfonic acids, liquid <E T="03">or</E> Aryl sulfonic acids, liquid <E T="03">with more than 5 percent free sulfuric acid</E> </ENT> <ENT>8</ENT> <ENT>UN2584</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T8, TP2, TP13</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkyl sulfonic acids, liquid <E T="03">or</E> Aryl sulfonic acids, liquid <E T="03">with not more than 5 percent free sulfuric acid</E> </ENT> <ENT>8</ENT> <ENT>UN2586</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkyl sulfonic acids, solid <E T="03">or</E> Aryl sulfonic acids, solid, <E T="03">with more than 5 percent free sulfuric acid</E> </ENT> <ENT>8</ENT> <ENT>UN2583</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkyl sulfonic acids, solid <E T="03">or</E> Aryl sulfonic acids, solid <E T="03">with not more than 5 percent free sulfuric acid</E> </ENT> <ENT>8</ENT> <ENT>UN2585</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>154</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkylphenols, liquid, n.o.s. <E T="03">(including C2-C12 homologues)</E> </ENT> <ENT>8</ENT> <ENT>UN3145</ENT> <ENT>I</ENT> <ENT>8</ENT> <ENT>A6, T14, TP2</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>0.5 L</ENT> <ENT>2.5 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB2, T11, TP2, TP27</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T7, TP1, TP28</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkylphenols, solid, n.o.s. <E T="03">(including C2-C12 homologues)</E> </ENT> <ENT>8</ENT> <ENT>UN2430</ENT> <ENT>I</ENT> <ENT>8</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>1 kg</ENT> <ENT>25 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="138"/> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>154</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Alkylsulfuric acids</ENT> <ENT>8</ENT> <ENT>UN2571</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T8, TP2, TP13, TP28</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>14</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Allethrin, see</E> Pesticides, liquid, toxic, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl acetate</ENT> <ENT>3</ENT> <ENT>UN2333</ENT> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T7, TP1, TP13</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl alcohol</ENT> <ENT>6.1</ENT> <ENT>UN1098</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>2, B9, B14, B32, B77, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl bromide</ENT> <ENT>3</ENT> <ENT>UN1099</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl chloride</ENT> <ENT>3</ENT> <ENT>UN1100</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Allyl chlorocarbonate, see</E> Allyl chloroformate</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl chloroformate</ENT> <ENT>6.1</ENT> <ENT>UN1722</ENT> <ENT>I</ENT> <ENT>6.1, 3, 8</ENT> <ENT>2, B9, B14, B32, N41, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl ethyl ether</ENT> <ENT>3</ENT> <ENT>UN2335</ENT> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T7, TP1, TP13</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl formate</ENT> <ENT>3</ENT> <ENT>UN2336</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl glycidyl ether</ENT> <ENT>3</ENT> <ENT>UN2219</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl iodide</ENT> <ENT>3</ENT> <ENT>UN1723</ENT> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>A3, A6, IB1, N34, T7, TP2, TP13</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyl isothiocyanate, stabilized</ENT> <ENT>6.1</ENT> <ENT>UN1545</ENT> <ENT>II</ENT> <ENT>6.1, 3</ENT> <ENT>A3, A7, IB2, T7, TP2</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>60 L</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allylamine</ENT> <ENT>6.1</ENT> <ENT>UN2334</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>2, B9, B14, B32, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Allyltrichlorosilane, stabilized</ENT> <ENT>8</ENT> <ENT>UN1724</ENT> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>A7, B2, B6, N34, T10, TP2, TP7, TP13</ENT> <ENT>None</ENT> <ENT>206</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum borohydride <E T="03">or</E> Aluminum borohydride in devices</ENT> <ENT>4.2</ENT> <ENT>UN2870</ENT> <ENT>I</ENT> <ENT>4.2, 4.3</ENT> <ENT>B11, T21, TP7, TP33</ENT> <ENT>None</ENT> <ENT>181</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum bromide, anhydrous</ENT> <ENT>8</ENT> <ENT>UN1725</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum bromide, solution</ENT> <ENT>8</ENT> <ENT>UN2580</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum carbide</ENT> <ENT>4.3</ENT> <ENT>UN1394</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>A20, IB7, IP2, N41, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum chloride, anhydrous</ENT> <ENT>8</ENT> <ENT>UN1726</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum chloride, solution</ENT> <ENT>8</ENT> <ENT>UN2581</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aluminum dross, wet or hot</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <PRTPAGE P="139"/> <ENT I="01"/> <ENT>Aluminum ferrosilicon powder</ENT> <ENT>4.3</ENT> <ENT>UN1395</ENT> <ENT>II</ENT> <ENT>4.3, 6.1</ENT> <ENT>A19, IB5, IP2, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>39, 40, 52, 53, 85, 103</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>4.3, 6.1</ENT> <ENT>A19, A20, IB4</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>241</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>39, 40, 52, 53, 85, 103</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum hydride</ENT> <ENT>4.3</ENT> <ENT>UN2463</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A19, N40</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Aluminum, molten</ENT> <ENT>9</ENT> <ENT>NA9260</ENT> <ENT>III</ENT> <ENT>9</ENT> <ENT>IB3, T1, TP3</ENT> <ENT>None</ENT> <ENT>None</ENT> <ENT>247</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum nitrate</ENT> <ENT>5.1</ENT> <ENT>UN1438</ENT> <ENT>III</ENT> <ENT>5.1</ENT> <ENT>A1, A29, IB8, IP3, T1, TP33</ENT> <ENT>152</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aluminum phosphate solution, see</E> Corrosive liquids, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum phosphide</ENT> <ENT>4.3</ENT> <ENT>UN1397</ENT> <ENT>I</ENT> <ENT>4.3, 6.1</ENT> <ENT>A8, A19, N40</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>E</ENT> <ENT>40, 52, 85</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum phosphide pesticides</ENT> <ENT>6.1</ENT> <ENT>UN3048</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>A8, IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>E</ENT> <ENT>40, 85</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum powder, coated</ENT> <ENT>4.1</ENT> <ENT>UN1309</ENT> <ENT>II</ENT> <ENT>4.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>13, 39, 52, 53, 74, 101</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>4.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>13, 39, 52, 53, 74, 101</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum powder, uncoated</ENT> <ENT>4.3</ENT> <ENT>UN1396</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>A19, A20, IB7, IP2, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>39, 52, 53</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>4.3</ENT> <ENT>A19, A20, IB8, IP4, T1, TP33</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>241</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>39, 52, 53</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum resinate</ENT> <ENT>4.1</ENT> <ENT>UN2715</ENT> <ENT>III</ENT> <ENT>4.1</ENT> <ENT>IB6, T1, TP33</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum silicon powder, uncoated</ENT> <ENT>4.3</ENT> <ENT>UN1398</ENT> <ENT>III</ENT> <ENT>4.3</ENT> <ENT>A1, A19, IB8, IP4, T1, TP33</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>241</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>39, 40, 52, 53, 85, 103</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aluminum smelting by-products <E T="03">or</E> Aluminum remelting by-products</ENT> <ENT>4.3</ENT> <ENT>UN3170</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>128, B115, IB7, IP2, T3, TP33</ENT> <ENT>None</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>B</ENT> <ENT>85, 103</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>4.3</ENT> <ENT>128, B115, IB8, IP4, T1, TP33</ENT> <ENT>None</ENT> <ENT>213</ENT> <ENT>241</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>B</ENT> <ENT>85, 103</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Amatols, see</E> Explosives, blasting, type B</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Amine, flammable, corrosive, n.o.s. or Polyamines, flammable, corrosive, n.o.s</ENT> <ENT>3</ENT> <ENT>UN2733</ENT> <ENT>I</ENT> <ENT>3, 8</ENT> <ENT>T14, TP1, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>0.5 L</ENT> <ENT>2.5 L</ENT> <ENT>D</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="22" O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>IB2, T11, TP1, TP27</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="22" O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>III</ENT> <ENT>3, 8</ENT> <ENT>B1, IB3, T7, TP1, TP28</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Amine, liquid, corrosive, flammable, n.o.s. <E T="03">or</E> Polyamines, liquid, corrosive, flammable, n.o.s</ENT> <ENT>8</ENT> <ENT>UN2734</ENT> <ENT>I</ENT> <ENT>8, 3</ENT> <ENT>A3, A6, N34, T14, TP2, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>0.5 L</ENT> <ENT>2.5 L</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="22" O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>IB2, T11, TP2, TP27</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Amines, liquid, corrosive, n.o.s., <E T="03">or</E> Polyamines, liquid, corrosive, n.o.s.</ENT> <ENT>8</ENT> <ENT>UN2735</ENT> <ENT>I</ENT> <ENT>8</ENT> <ENT>A3, A6, B10, N34, T14, TP2, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>0.5 L</ENT> <ENT>2.5 L</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T11, TP1, TP27</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T7, TP1, TP28</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Amines, solid, corrosive, n.o.s., <E T="03">or</E> Polyamines, solid, corrosive n.o.s.</ENT> <ENT>8</ENT> <ENT>UN3259</ENT> <ENT>I</ENT> <ENT>8</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>1 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <PRTPAGE P="140"/> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>154</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>2-Amino-4-chlorophenol</ENT> <ENT>6.1</ENT> <ENT>UN2673</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>2-Amino-5-diethylaminopentane</ENT> <ENT>6.1</ENT> <ENT>UN2946</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>2-Amino-4,6-Dinitrophenol, wetted <E T="03">with not less than 20 percent water by mass</E> </ENT> <ENT>4.1</ENT> <ENT>UN3317</ENT> <ENT>I</ENT> <ENT>4.1</ENT> <ENT>23, A8, A19, A20, N41</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>None</ENT> <ENT>1 kg</ENT> <ENT>15 kg</ENT> <ENT>E</ENT> <ENT>28, 36</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>2-(2-Aminoethoxy) ethanol</ENT> <ENT>8</ENT> <ENT>UN3055</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>N-Aminoethylpiperazine</ENT> <ENT>8</ENT> <ENT>UN2815</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>12</ENT> </ROW> <ROW> <ENT I="01"> +</ENT> <ENT>Aminophenols (o-; m-; p-)</ENT> <ENT>6.1</ENT> <ENT>UN2512</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aminopropyldiethanolamine, see</E> Amines, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">n-Aminopropylmorpholine, see</E> Amines, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Aminopyridines <E T="03">(o-; m-; p-)</E> </ENT> <ENT>6.1</ENT> <ENT>UN2671</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>B</ENT> <ENT>12, 40, 52.</ENT> </ROW> <ROW> <ENT I="01">I</ENT> <ENT>Ammonia, anhydrous</ENT> <ENT>2.3</ENT> <ENT>UN1005</ENT> <ENT/> <ENT>2.3, 8</ENT> <ENT>4, N87, T50</ENT> <ENT>None</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40, 52, 57</ENT> </ROW> <ROW> <ENT I="01">D</ENT> <ENT>Ammonia, anhydrous</ENT> <ENT>2.2</ENT> <ENT>UN1005</ENT> <ENT/> <ENT>2.2</ENT> <ENT>13, T50</ENT> <ENT>None</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40, 52, 57</ENT> </ROW> <ROW> <ENT I="01">I</ENT> <ENT>Ammonia solution, <E T="03">relative density less than 0.880 at 15 degrees C in water, with more than 50 percent ammonia</E> </ENT> <ENT>2.3</ENT> <ENT>UN3318</ENT> <ENT/> <ENT>2.3, 8</ENT> <ENT>4, N87, T50</ENT> <ENT>None</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40, 52, 57</ENT> </ROW> <ROW> <ENT I="01">D</ENT> <ENT>Ammonia solution, <E T="03">relative density less than 0.880 at 15 degrees C in water, with more than 50 percent ammonia</E> </ENT> <ENT>2.2</ENT> <ENT>UN3318</ENT> <ENT/> <ENT>2.2</ENT> <ENT>13, T50</ENT> <ENT>None</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40, 52, 57</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Ammonia solutions, <E T="03">relative density less than 0.880 at 15 degrees C in water, with more than 35 percent but not more than 50 percent ammonia</E> </ENT> <ENT>2.2</ENT> <ENT>UN2073</ENT> <ENT/> <ENT>2.2</ENT> <ENT>N87</ENT> <ENT>306</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>150 kg</ENT> <ENT>E</ENT> <ENT>40, 52, 57</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Ammonia solution, <E T="03">relative density between 0.880 and 0.957 at 15 degrees C in water, with more than 10 percent but not more than 35 percent ammonia</E> </ENT> <ENT>8</ENT> <ENT>UN2672</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, IP8, T7, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40, 52, 85</ENT> </ROW> <ROW> <PRTPAGE P="141"/> <ENT I="01"/> <ENT>Ammonium arsenate</ENT> <ENT>6.1</ENT> <ENT>UN1546</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>53</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium azide</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium bifluoride, solid, see</E> Ammonium hydrogen difluoride, solid</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium bifluoride solution, see</E> Ammonium hydrogen difluoride, solution</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium bromate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium chlorate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium dichromate</ENT> <ENT>5.1</ENT> <ENT>UN1439</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium dinitro-o-cresolate, solid</ENT> <ENT>6.1</ENT> <ENT>UN1843</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>B</ENT> <ENT>36, 65, 66, 77</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium dinitro-o-cresolate solution</ENT> <ENT>6.1</ENT> <ENT>UN3424</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>36, 66, 78, 91</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>36, 66, 78, 91</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium fluoride</ENT> <ENT>6.1</ENT> <ENT>UN2505</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium fluorosilicate</ENT> <ENT>6.1</ENT> <ENT>UN2854</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium fulminate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium hydrogen sulfate</ENT> <ENT>8</ENT> <ENT>UN2506</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium hydrogendifluoride, solid</ENT> <ENT>8</ENT> <ENT>UN1727</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, N34, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>25, 40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium hydrogendifluoride, solution</ENT> <ENT>8</ENT> <ENT>UN2817</ENT> <ENT>II</ENT> <ENT>8, 6.1</ENT> <ENT>IB2, N34, T8, TP2, TP13</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8, 6.1</ENT> <ENT>IB3, N3, T4, TP1 , TP13</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40, 95</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium hydrosulfide, solution, see</E> Ammonium sulfide solution</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Ammonium hydroxide, <E T="03">see</E> Ammonia solutions, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium metavanadate</ENT> <ENT>6.1</ENT> <ENT>UN2859</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>44, 89, 100, 141</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium nitrate based fertilizer</ENT> <ENT>5.1</ENT> <ENT>UN2067</ENT> <ENT>III</ENT> <ENT>5.1</ENT> <ENT>52, 150, IB8, IP3, T1, TP33</ENT> <ENT>152</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>B</ENT> <ENT>48, 59, 60, 66, 117</ENT> </ROW> <ROW> <ENT I="01"> A W</ENT> <ENT>Ammonium nitrate based fertilizer</ENT> <ENT>9</ENT> <ENT>UN2071</ENT> <ENT>III</ENT> <ENT>9</ENT> <ENT>132, IB8, IP3</ENT> <ENT>155</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>200 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Ammonium nitrate emulsion <E T="03">or</E> Ammonium nitrate suspension <E T="03">or</E> Ammonium nitrate gel, <E T="03">intermediate for blasting explosives</E> </ENT> <ENT>5.1</ENT> <ENT>UN3375</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>147, 163</ENT> <ENT>None</ENT> <ENT>214</ENT> <ENT>214</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>48, 59, 60, 66, 124</ENT> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Ammonium nitrate-fuel oil mixture <E T="03">containing only prilled ammonium nitrate and fuel oil</E> </ENT> <ENT>1.5D</ENT> <ENT>NA0331</ENT> <ENT>II</ENT> <ENT>1.5D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>10</ENT> <ENT>19E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium nitrate, liquid <E T="03">(hot concentrated solution)</E> </ENT> <ENT>5.1</ENT> <ENT>UN2426</ENT> <ENT/> <ENT>5.1</ENT> <ENT>B5, T7</ENT> <ENT>None</ENT> <ENT>None</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>59, 60</ENT> </ROW> <ROW> <PRTPAGE P="142"/> <ENT I="01"/> <ENT>Ammonium nitrate, <E T="03">with more than 0.2 percent combustible substances, including any organic substance calculated as carbon, to the exclusion of any other added substance</E> </ENT> <ENT>1.1D</ENT> <ENT>UN0222</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>10</ENT> <ENT>19E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium nitrate, <E T="03">with not more than 0.2% total combustible material, including any organic substance, calculated as carbon to the exclusion of any other added substance</E> </ENT> <ENT>5.1</ENT> <ENT>UN1942</ENT> <ENT>III</ENT> <ENT>5.1</ENT> <ENT>A1, A29, IB8, IP3, T1, TP33</ENT> <ENT>152</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>48, 59, 60, 116</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium nitrite</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium perchlorate</ENT> <ENT>1.1D</ENT> <ENT>UN0402</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT>107</ENT> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>10</ENT> <ENT>19E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium perchlorate</ENT> <ENT>5.1</ENT> <ENT>UN1442</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>107, A9, IB6, IP2, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>E</ENT> <ENT>58, 69</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium permanganate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium persulfate</ENT> <ENT>5.1</ENT> <ENT>UN1444</ENT> <ENT>III</ENT> <ENT>5.1</ENT> <ENT>A1, A29, IB8, IP3, T1, TP33</ENT> <ENT>152</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium picrate, <E T="03">dry or wetted with less than 10 percent water, by mass</E> </ENT> <ENT>1.1D</ENT> <ENT>UN0004</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>10</ENT> <ENT>5E, 19E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium picrate, wetted <E T="03">with not less than 10 percent water, by mass</E> </ENT> <ENT>4.1</ENT> <ENT>UN1310</ENT> <ENT>I</ENT> <ENT>4.1</ENT> <ENT>23, A2, N41</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>None</ENT> <ENT>0.5 kg</ENT> <ENT>0.5 kg</ENT> <ENT>D</ENT> <ENT>28, 36</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium polysulfide, solution</ENT> <ENT>8</ENT> <ENT>UN2818</ENT> <ENT>II</ENT> <ENT>8, 6.1</ENT> <ENT>IB2, T7, TP2, TP13</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>12, 40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8, 6.1</ENT> <ENT>IB3, T4, TP1, TP13</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>12, 40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium polyvanadate</ENT> <ENT>6.1</ENT> <ENT>UN2861</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>44, 89, 100, 141</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammonium silicofluoride, see</E> Ammonium fluorosilicate</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammonium sulfide solution</ENT> <ENT>8</ENT> <ENT>UN2683</ENT> <ENT>II</ENT> <ENT>8, 6.1, 3</ENT> <ENT>IB1, T7, TP2, TP13</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>12, 22, 52, 100</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, blank, see</E> Cartridges for weapons, blank</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <PRTPAGE P="143"/> <ENT I="01"/> <ENT>Ammunition, illuminating <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.2G</ENT> <ENT>UN0171</ENT> <ENT>II</ENT> <ENT>1.2G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, illuminating <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.3G</ENT> <ENT>UN0254</ENT> <ENT>II</ENT> <ENT>1.3G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, illuminating <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.4G</ENT> <ENT>UN0297</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>02</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, incendiary <E T="03">liquid or gel, with burster, expelling charge or propelling charge</E> </ENT> <ENT>1.3J</ENT> <ENT>UN0247</ENT> <ENT>II</ENT> <ENT>1.3J</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>04</ENT> <ENT>23E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, incendiary (water-activated contrivances) with burster, expelling charge or propelling charge, see</E> Contrivances, water-activated, etc.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, incendiary, white phosphorus, <E T="03">with burster, expelling charge or propelling charge</E> </ENT> <ENT>1.2H</ENT> <ENT>UN0243</ENT> <ENT>II</ENT> <ENT>1.2H</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, incendiary, white phosphorus, <E T="03">with burster, expelling charge or propelling charge</E> </ENT> <ENT>1.3H</ENT> <ENT>UN0244</ENT> <ENT>II</ENT> <ENT>1.3H</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, incendiary <E T="03">with or without burster, expelling charge, or propelling charge</E> </ENT> <ENT>1.2G</ENT> <ENT>UN0009</ENT> <ENT>II</ENT> <ENT>1.2G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, incendiary <E T="03">with or without burster, expelling charge, or propelling charge</E> </ENT> <ENT>1.3G</ENT> <ENT>UN0010</ENT> <ENT>II</ENT> <ENT>1.3G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, incendiary <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.4G</ENT> <ENT>UN0300</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>02</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, practice</ENT> <ENT>1.4G</ENT> <ENT>UN0362</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>02</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, practice</ENT> <ENT>1.3G</ENT> <ENT>UN0488</ENT> <ENT>II</ENT> <ENT>1.3G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, proof</ENT> <ENT>1.4G</ENT> <ENT>UN0363</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>02</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, rocket, see</E> Warheads, rocket <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, SA (small arms), see</E> Cartridges for weapons, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, smoke (water-activated contrivances), white phosphorus, with burster, expelling charge or propelling charge, see</E> Contrivances, water-activated, etc. (UN 0248)</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <PRTPAGE P="144"/> <ENT I="01"/> <ENT> <E T="03">Ammunition, smoke (water-activated contrivances), without white phosphorus or phosphides, with burster, expelling charge or propelling charge, see</E> Contrivances, water-activated, etc. (UN 0249)</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition smoke, white phosphorus <E T="03">with burster,expelling charge, or propelling charge</E> </ENT> <ENT>1.2H</ENT> <ENT>UN0245</ENT> <ENT>II</ENT> <ENT>1.2H</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, smoke, white phosphorus <E T="03">with burster, expelling charge, or propelling charge</E> </ENT> <ENT>1.3H</ENT> <ENT>UN0246</ENT> <ENT>II</ENT> <ENT>1.3H</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, smoke <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.2G</ENT> <ENT>UN0015</ENT> <ENT>II</ENT> <ENT>1.2G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT/> <ENT>8E, 17E, 20E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, smoke <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.3G</ENT> <ENT>UN0016</ENT> <ENT>II</ENT> <ENT>1.3G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT/> <ENT>8E, 17E, 20E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, smoke <E T="03">with or without burster, expelling charge or propelling charge</E> </ENT> <ENT>1.4G</ENT> <ENT>UN0303</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT/> <ENT>7E, 8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, sporting, see</E> Cartridges for weapons, etc. (UN 0012; UN 0328; UN 0339)</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, tear-producing, non-explosive, <E T="03">without burster or expelling charge, non-fuzed</E> </ENT> <ENT>6.1</ENT> <ENT>UN2017</ENT> <ENT>II</ENT> <ENT>6.1, 8</ENT> <ENT/> <ENT>None</ENT> <ENT>212</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>50 kg</ENT> <ENT>E</ENT> <ENT>13, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, tear-producing <E T="03">with burster, expelling charge or propelling charge</E> </ENT> <ENT>1.2G</ENT> <ENT>UN0018</ENT> <ENT>II</ENT> <ENT>1.2G, 8, 6.1</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT/> <ENT>8E, 17E, 20E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, tear-producing <E T="03">with burster, expelling charge or propelling charge</E> </ENT> <ENT>1.3G</ENT> <ENT>UN0019</ENT> <ENT>II</ENT> <ENT>1.3G, 8, 6.1</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT/> <ENT>8E, 17E, 20E</ENT> </ROW> <ROW> <PRTPAGE P="145"/> <ENT I="01"/> <ENT>Ammunition, tear-producing <E T="03">with burster, expelling charge or propelling charge</E> </ENT> <ENT>1.4G</ENT> <ENT>UN0301</ENT> <ENT>II</ENT> <ENT>1.4G, 8, 6.1</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT/> <ENT>7E, 8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Ammunition, toxic, non-explosive, <E T="03">without burster or expelling charge, non-fuzed</E> </ENT> <ENT>6.1</ENT> <ENT>UN2016</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT/> <ENT>None</ENT> <ENT>212</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>100 kg</ENT> <ENT>E</ENT> <ENT>13, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ammunition, toxic (water-activated contrivances), with burster, expelling charge or propelling charge, see</E> Contrivances, water-activated, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Ammunition, toxic <E T="03">with burster, expelling charge, or propelling charge</E> </ENT> <ENT>1.2K</ENT> <ENT>UN0020</ENT> <ENT>II</ENT> <ENT>1.2K, 6.1</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"> G</ENT> <ENT>Ammunition, toxic <E T="03">with burster, expelling charge, or propelling charge</E> </ENT> <ENT>1.3K</ENT> <ENT>UN0021</ENT> <ENT>II</ENT> <ENT>1.3K, 6.1</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl acetates</ENT> <ENT>3</ENT> <ENT>UN1104</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl acid phosphate</ENT> <ENT>8</ENT> <ENT>UN2819</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl butyrates</ENT> <ENT>3</ENT> <ENT>UN2620</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl chlorides</ENT> <ENT>3</ENT> <ENT>UN1107</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl formates</ENT> <ENT>3</ENT> <ENT>UN1109</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl mercaptans</ENT> <ENT>3</ENT> <ENT>UN1111</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>A3, A6, IB2, T4, TP1</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>95, 102</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>n-Amyl methyl ketone</ENT> <ENT>3</ENT> <ENT>UN1110</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl nitrate</ENT> <ENT>3</ENT> <ENT>UN1112</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Amyl nitrites</ENT> <ENT>3</ENT> <ENT>UN1113</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Amylamines</ENT> <ENT>3</ENT> <ENT>UN1106</ENT> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>IB2, T7, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3, 8</ENT> <ENT>B1, IB3, T4, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Amyltrichlorosilane</ENT> <ENT>8</ENT> <ENT>UN1728</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>A7, B2, B6, N34, T10, TP2, TP7, TP13</ENT> <ENT>None</ENT> <ENT>206</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Anhydrous ammonia, <E T="03">see</E> Ammonia, anhydrous</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Anhydrous hydrofluoric acid, see</E> Hydrogen fluoride, anhydrous</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> +</ENT> <ENT>Aniline</ENT> <ENT>6.1</ENT> <ENT>UN1547</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Aniline hydrochloride</ENT> <ENT>6.1</ENT> <ENT>UN1548</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aniline oil, see</E> Aniline</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Anisidines</ENT> <ENT>6.1</ENT> <ENT>UN2431</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Anisole</ENT> <ENT>3</ENT> <ENT>UN2222</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Anisoyl chloride</ENT> <ENT>8</ENT> <ENT>UN1729</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, B4, IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Anti-freeze, liquid, see</E> Flammable liquids, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Antimonous chloride, see</E> Antimony trichloride</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony compounds, inorganic, liquid, n.o.s.</ENT> <ENT>6.1</ENT> <ENT>UN3141</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>35, IB3, T7, TP1, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="146"/> <ENT I="01"/> <ENT>Antimony compounds, inorganic, solid, n.o.s.</ENT> <ENT>6.1</ENT> <ENT>UN1549</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>35, IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony lactate</ENT> <ENT>6.1</ENT> <ENT>UN1550</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony pentachloride, liquid</ENT> <ENT>8</ENT> <ENT>UN1730</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T7, TP2</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony pentachloride, solutions</ENT> <ENT>8</ENT> <ENT>UN1731</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony pentafluoride</ENT> <ENT>8</ENT> <ENT>UN1732</ENT> <ENT>II</ENT> <ENT>8, 6.1</ENT> <ENT>A3, A6, A7, A10, IB2, N3, N36, T7, TP2</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>D</ENT> <ENT>44, 89, 100, 141</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony potassium tartrate</ENT> <ENT>6.1</ENT> <ENT>UN1551</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony powder</ENT> <ENT>6.1</ENT> <ENT>UN2871</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Antimony sulfide and a chlorate, mixtures of</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Antimony sulfide, solid, see</E> Antimony compounds, inorganic, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Antimony trichloride, liquid</ENT> <ENT>8</ENT> <ENT>UN1733</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Antimony trichloride, solid</ENT> <ENT>8</ENT> <ENT>UN1733</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40.</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Aqua ammonia, see</E> Ammonia solution, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Argon, compressed</ENT> <ENT>2.2</ENT> <ENT>UN1006</ENT> <ENT>2.2</ENT> <ENT>306, 307</ENT> <ENT>302</ENT> <ENT>314, 315</ENT> <ENT>75 kg</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Argon, refrigerated liquid <E T="03">(cryogenic liquid)</E> </ENT> <ENT>2.2</ENT> <ENT>UN1951</ENT> <ENT/> <ENT>2.2</ENT> <ENT>T75, TP5</ENT> <ENT>320</ENT> <ENT>316</ENT> <ENT>318</ENT> <ENT>50 kg</ENT> <ENT>500 kg</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic</ENT> <ENT>6.1</ENT> <ENT>UN1558</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic acid, liquid</ENT> <ENT>6.1</ENT> <ENT>UN1553</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>T20, TP2, TP7, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>46</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic acid, solid</ENT> <ENT>6.1</ENT> <ENT>UN1554</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic bromide</ENT> <ENT>6.1</ENT> <ENT>UN1555</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>12, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Arsenic chloride, see</E> Arsenic trichloride</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic compounds, liquid, n.o.s. <E T="03">inorganic, including arsenates, n.o.s.; arsenites, n.o.s.; arsenic sulfides, n.o.s.; and organic compounds of arsenic, n.o.s.</E> </ENT> <ENT>6.1</ENT> <ENT>UN1556</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40, 137</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40, 137</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T7, TP2, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>B</ENT> <ENT>40, 137</ENT> </ROW> <ROW> <PRTPAGE P="147"/> <ENT I="01"/> <ENT>Arsenic compounds, solid, n.o.s. <E T="03">inorganic, including arsenates, n.o.s.; arsenites, n.o.s.; arsenic sulfides, n.o.s.; and organic compounds of arsenic, n.o.s.</E> </ENT> <ENT>6.1</ENT> <ENT>UN1557</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>137</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>137</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>137</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic pentoxide</ENT> <ENT>6.1</ENT> <ENT>UN1559</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Arsenic sulfide and a chlorate, mixtures of</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic trichloride</ENT> <ENT>6.1</ENT> <ENT>UN1560</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>2, B9, B14, B32, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenic trioxide</ENT> <ENT>6.1</ENT> <ENT>UN1561</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Arsenic, white, solid, see</E> Arsenic trioxide</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenical dust</ENT> <ENT>6.1</ENT> <ENT>UN1562</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenical pesticides, liquid, flammable, toxic, <E T="03">flash point less than 23 degrees C</E> </ENT> <ENT>3</ENT> <ENT>UN2760</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenical pesticides, liquid, toxic</ENT> <ENT>6.1</ENT> <ENT>UN2994</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T7, TP2, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenical pesticides, liquid, toxic, flammable, <E T="03">flash point not less than 23 degrees C</E> </ENT> <ENT>6.1</ENT> <ENT>UN2993</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1, 3</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1, 3</ENT> <ENT>B1, IB3, T7, TP2, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Arsenical pesticides, solid, toxic</ENT> <ENT>6.1</ENT> <ENT>UN2759</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Arsenious acid, solid, see</E> Arsenic trioxide</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Arsenious and mercuric iodide solution, see</E> Arsenic compounds, liquid, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Arsine</ENT> <ENT>2.3</ENT> <ENT>UN2188</ENT> <ENT/> <ENT>2.3, 2.1</ENT> <ENT>1</ENT> <ENT>None</ENT> <ENT>192</ENT> <ENT>245</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Articles, explosive, extremely insensitive <E T="03">or</E> Articles, EEI</ENT> <ENT>1.6N</ENT> <ENT>UN0486</ENT> <ENT>II</ENT> <ENT>1.6N</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4S</ENT> <ENT>UN0349</ENT> <ENT>II</ENT> <ENT>1.4S</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>05</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4B</ENT> <ENT>UN0350</ENT> <ENT>II</ENT> <ENT>1.4B</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>06</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4C</ENT> <ENT>UN0351</ENT> <ENT>II</ENT> <ENT>1.4C</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>06</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4D</ENT> <ENT>UN0352</ENT> <ENT>II</ENT> <ENT>1.4D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>06</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4G</ENT> <ENT>UN0353</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>06</ENT> </ROW> <ROW> <PRTPAGE P="148"/> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.1L</ENT> <ENT>UN0354</ENT> <ENT>II</ENT> <ENT>1.1L</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E.</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.2L</ENT> <ENT>UN0355</ENT> <ENT>II</ENT> <ENT>1.2L</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E.</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.3L</ENT> <ENT>UN0356</ENT> <ENT>II</ENT> <ENT>1.3L</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E.</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.1C</ENT> <ENT>UN0462</ENT> <ENT>II</ENT> <ENT>1.1C</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.1D</ENT> <ENT>UN0463</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.1E</ENT> <ENT>UN0464</ENT> <ENT>II</ENT> <ENT>1.1E</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.1F</ENT> <ENT>UN0465</ENT> <ENT>II</ENT> <ENT>1.1F</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.2C</ENT> <ENT>UN0466</ENT> <ENT>II</ENT> <ENT>1.2C</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.2D</ENT> <ENT>UN0467</ENT> <ENT>II</ENT> <ENT>1.2D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT O="xl">07.</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.2E</ENT> <ENT>UN0468</ENT> <ENT>II</ENT> <ENT>1.2E</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.2F</ENT> <ENT>UN0469</ENT> <ENT>II</ENT> <ENT>1.2F</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.3C</ENT> <ENT>UN0470</ENT> <ENT>II</ENT> <ENT>1.3C</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4E</ENT> <ENT>UN0471</ENT> <ENT>II</ENT> <ENT>1.4E</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>06</ENT> </ROW> <ROW> <ENT I="01">G</ENT> <ENT>Articles, explosive, n.o.s</ENT> <ENT>1.4F</ENT> <ENT>UN0472</ENT> <ENT>II</ENT> <ENT>1.4F</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Articles, pressurized pneumatic <E T="03">or</E> hydraulic <E T="03">containing non-flammable gas</E> </ENT> <ENT>2.2</ENT> <ENT>UN3164</ENT> <ENT/> <ENT>2.2</ENT> <ENT/> <ENT>306</ENT> <ENT>302, 304</ENT> <ENT>None</ENT> <ENT>No limit</ENT> <ENT>No limit</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Articles, pyrophoric</ENT> <ENT>1.2L</ENT> <ENT>UN0380</ENT> <ENT>II</ENT> <ENT>1.2L</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT>8E, 14E, 15E, 17E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Articles, pyrotechnic <E T="03">for technical purposes</E> </ENT> <ENT>1.1G</ENT> <ENT>UN0428</ENT> <ENT>II</ENT> <ENT>1.1G</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Articles, pyrotechnic <E T="03">for technical purposes</E> </ENT> <ENT>1.2G</ENT> <ENT>UN0429</ENT> <ENT>II</ENT> <ENT>1.2G</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Articles, pyrotechnic <E T="03">for technical purposes</E> </ENT> <ENT>1.3G</ENT> <ENT>UN0430</ENT> <ENT>II</ENT> <ENT>1.3G</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Articles, pyrotechnic <E T="03">for technical purposes</E> </ENT> <ENT>1.4G</ENT> <ENT>UN0431</ENT> <ENT>II</ENT> <ENT>1.4G</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>75 kg</ENT> <ENT>06</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="149"/> <ENT I="01"/> <ENT>Articles, pyrotechnic <E T="03">for technical purposes</E> </ENT> <ENT>1.4S</ENT> <ENT>UN0432</ENT> <ENT>II</ENT> <ENT>1.4S</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>05</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Asbestos</ENT> <ENT>9</ENT> <ENT>NA2212</ENT> <ENT>III</ENT> <ENT>9</ENT> <ENT>156, IB8, IP2, IP4</ENT> <ENT>155</ENT> <ENT>216</ENT> <ENT>240</ENT> <ENT>200 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>34, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Ascaridole (organic peroxide)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Asphalt, <E T="03">at or above its flash point</E> </ENT> <ENT>3</ENT> <ENT>NA1999</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>IB3, T1, TP3</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>247</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Asphalt, cut back, <E T="03">see</E> Tars, liquid, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Automobile, motorcycle, tractor, other self-propelled vehicle, engine, or other mechanical apparatus, see</E> Vehicles <E T="03">or</E> Battery <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> A G</ENT> <ENT>Aviation regulated liquid, n.o.s.</ENT> <ENT>9</ENT> <ENT>UN3334</ENT> <ENT/> <ENT>9</ENT> <ENT>A35</ENT> <ENT>155</ENT> <ENT>204</ENT> <ENT/> <ENT>No limit</ENT> <ENT>No limit</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> A G</ENT> <ENT>Aviation regulated solid, n.o.s.</ENT> <ENT>9</ENT> <ENT>UN3335</ENT> <ENT/> <ENT>9</ENT> <ENT>A35</ENT> <ENT>155</ENT> <ENT>204</ENT> <ENT/> <ENT>No limit</ENT> <ENT>No limit</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Azaurolic acid (salt of) (dry)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Azido guanidine picrate (dry)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">5-Azido-1-hydroxy tetrazole</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Azido hydroxy tetrazole (mercury and silver salts)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">3-Azido-1,2-Propylene glycol dinitrate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Azidodithiocarbonic acid</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Azidoethyl nitrate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">1-Aziridinylphosphine oxide-(tris), see</E> Tris-(1-aziridinyl) phosphine oxide, solution</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Azodicarbonamide</ENT> <ENT>4.1</ENT> <ENT>UN3242</ENT> <ENT>II</ENT> <ENT>4.1</ENT> <ENT>38, IB8, T3, TP33</ENT> <ENT>151</ENT> <ENT>223</ENT> <ENT>240</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>2, 52, 53, 74</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Azotetrazole (dry)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Barium</ENT> <ENT>4.3</ENT> <ENT>UN1400</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>A19, IB7, IP2, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>241</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>E</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium alloys, pyrophoric</ENT> <ENT>4.2</ENT> <ENT>UN1854</ENT> <ENT>I</ENT> <ENT>4.2</ENT> <ENT>T21, TP7, TP33</ENT> <ENT>None</ENT> <ENT>181</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Barium azide, <E T="03">dry or wetted with less than 50 percent water, by mass</E> </ENT> <ENT>1.1A</ENT> <ENT>UN0224</ENT> <ENT>II</ENT> <ENT>1.1A, 6.1</ENT> <ENT>111, 117</ENT> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>12</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Barium azide, wetted <E T="03">with not less than 50 percent water, by mass</E> </ENT> <ENT>4.1</ENT> <ENT>UN1571</ENT> <ENT>I</ENT> <ENT>4.1, 6.1</ENT> <ENT>162, A2</ENT> <ENT>None</ENT> <ENT>182</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>0.5 kg</ENT> <ENT>D</ENT> <ENT>28</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium bromate</ENT> <ENT>5.1</ENT> <ENT>UN2719</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>56, 58</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium chlorate, solid</ENT> <ENT>5.1</ENT> <ENT>UN1445</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>A9, IB6, IP2, N34, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>56, 58</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium chlorate, solution</ENT> <ENT>5.1</ENT> <ENT>UN3405</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>A9, IB2, N34, T4, TP1</ENT> <ENT>152</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>A</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>5.1, 6.1</ENT> <ENT>A9, IB2, N34, T4, TP1</ENT> <ENT>152</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>2.5 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium compounds, n.o.s.</ENT> <ENT>6.1</ENT> <ENT>UN1564</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Barium cyanide</ENT> <ENT>6.1</ENT> <ENT>UN1565</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, N74, N75, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium hypochlorite <E T="03">with more than 22 percent available chlorine</E> </ENT> <ENT>5.1</ENT> <ENT>UN2741</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>A7, A9, IB8, IP2, IP4, N34, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>None</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>B</ENT> <ENT>4, 52, 56, 58, 106</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium nitrate</ENT> <ENT>5.1</ENT> <ENT>UN1446</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> </GPOTABLE> <PRTPAGE P="150"/> <GPOTABLE CDEF="2,r75,8,xls24,4,xs19,20,xs22,xs19,xs19,9,9,xls16,6" COLS="14" OPTS="L2(4,0,4)"> <TTITLE>§ 172.101 Hazardous Materials Table</TTITLE> <BOXHD> <CHED H="1">Symbols</CHED> <CHED H="1">Hazardous materials descriptions and proper shipping names</CHED> <CHED H="1">Hazard class or Division</CHED> <CHED H="1">Identification Numbers</CHED> <CHED H="1">PG</CHED> <CHED H="1">Label Codes</CHED> <CHED H="1">Special provisions<LI>(§ 172.102)</LI> </CHED> <CHED H="1">(8)</CHED> <CHED H="2">Packaging<LI>(§ 173.***)</LI> </CHED> <CHED H="3">Exceptions</CHED> <CHED H="3">Non-bulk</CHED> <CHED H="3">Bulk</CHED> <CHED H="1">(9)</CHED> <CHED H="2">Quantity limitations<LI>(see §§ 173.27 and 175.75)</LI> </CHED> <CHED H="3">Passenger aircraft/rail</CHED> <CHED H="3">Cargo aircraft only</CHED> <CHED H="1">(10)<LI>Vessel </LI> <LI>stowage</LI> </CHED> <CHED H="2">Location</CHED> <CHED H="2">Other</CHED> </BOXHD> <ROW RUL="s"> <ENT I="25">(1)</ENT> <ENT>(2)</ENT> <ENT>(3)</ENT> <ENT>(4)</ENT> <ENT>(5)</ENT> <ENT>(6)</ENT> <ENT>(7)</ENT> <ENT>(8A)</ENT> <ENT>(8B)</ENT> <ENT>(8C)</ENT> <ENT>(9A)</ENT> <ENT>(9B)</ENT> <ENT>(10A)</ENT> <ENT>(10B)</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium oxide</ENT> <ENT>6.1</ENT> <ENT>UN1884</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Barium perchlorate, solid</ENT> <ENT>5.1</ENT> <ENT>UN1447</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB6, IP2, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>56, 58</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium perchlorate, solution</ENT> <ENT>5.1</ENT> <ENT>UN3406</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>152</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>A</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>152</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>2.5 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium permanganate</ENT> <ENT>5.1</ENT> <ENT>UN1448</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB6, IP2, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>D</ENT> <ENT>56, 58, 138</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Barium peroxide</ENT> <ENT>5.1</ENT> <ENT>UN1449</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>A9, IB6, IP2, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>13, 52, 56, 75</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Barium selenate, see</E> Selenates <E T="03">or</E> Selenites</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Barium selenite, see</E> Selenates <E T="03">or</E> Selenites</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Batteries, containing sodium</ENT> <ENT>4.3</ENT> <ENT>UN3292</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT/> <ENT>189</ENT> <ENT>189</ENT> <ENT>189</ENT> <ENT>Forbidden</ENT> <ENT>No limit</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Batteries, dry, containing potassium hydroxide solid, <E T="03">electric, storage</E> </ENT> <ENT>8</ENT> <ENT>UN3028</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>237</ENT> <ENT>None</ENT> <ENT>213</ENT> <ENT>None</ENT> <ENT>25 kg gross</ENT> <ENT>230 kg gross</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Batteries, dry, sealed, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT>130</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Batteries, wet, filled with acid, <E T="03">electric storage</E> </ENT> <ENT>8</ENT> <ENT>UN2794</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT/> <ENT>159</ENT> <ENT>159</ENT> <ENT>159</ENT> <ENT>30 kg gross</ENT> <ENT>No limit</ENT> <ENT>A</ENT> <ENT>146</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Batteries, wet, filled with alkali, <E T="03">electric storage</E> </ENT> <ENT>8</ENT> <ENT>UN2795</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT/> <ENT>159</ENT> <ENT>159</ENT> <ENT>159</ENT> <ENT>30 kg gross</ENT> <ENT>No limit</ENT> <ENT>A</ENT> <ENT>52, 146</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Batteries, wet, non-spillable, <E T="03">electric storage</E> </ENT> <ENT>8</ENT> <ENT>UN2800</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT/> <ENT>159a</ENT> <ENT>159</ENT> <ENT>159</ENT> <ENT>No limit</ENT> <ENT>No limit</ENT> <ENT>A</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Battery fluid, acid</ENT> <ENT>8</ENT> <ENT>UN2796</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>A3, A7, B2, B15, IB2, N6, N34, T8, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Battery fluid, alkali</ENT> <ENT>8</ENT> <ENT>UN2797</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, N6, T7, TP2, TP28</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>29</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Battery lithium type, see</E> Lithium batteries <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Battery-powered vehicle <E T="03">or</E> Battery-powered equipment</ENT> <ENT>9</ENT> <ENT>UN3171</ENT> <ENT/> <ENT>9</ENT> <ENT>134</ENT> <ENT>220</ENT> <ENT>220</ENT> <ENT>None</ENT> <ENT>No limit</ENT> <ENT>No limit</ENT> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Battery, wet, filled with acid or alkali with vehicle or mechanical equipment containing an internal combustion engine, see</E> Vehicle, etc. or Engines, internal combustion, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <PRTPAGE P="151"/> <ENT I="01"> +</ENT> <ENT>Benzaldehyde</ENT> <ENT>9</ENT> <ENT>UN1990</ENT> <ENT>III</ENT> <ENT>9</ENT> <ENT>IB3, T2, TP1</ENT> <ENT>155</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>100 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Benzene</ENT> <ENT>3</ENT> <ENT>UN1114</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzene diazonium chloride (dry)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzene diazonium nitrate (dry)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzene phosphorus dichloride, see</E> Phenyl phosphorus dichloride</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzene phosphorus thiodichloride, see</E> Phenyl phosphorus thiodichloride</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Benzene sulfonyl chloride</ENT> <ENT>8</ENT> <ENT>UN2225</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzene triozonide</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzenethiol, see</E> Phenyl mercaptan</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Benzidine</ENT> <ENT>6.1</ENT> <ENT>UN1885</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzol,</E> see Benzene</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Benzonitrile</ENT> <ENT>6.1</ENT> <ENT>UN2224</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzoquinone</ENT> <ENT>6.1</ENT> <ENT>UN2587</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Benzotrichloride</ENT> <ENT>8</ENT> <ENT>UN2226</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzotrifluoride</ENT> <ENT>3</ENT> <ENT>UN2338</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzoxidiazoles (dry)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Benzoyl azide</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Benzoyl chloride</ENT> <ENT>8</ENT> <ENT>UN1736</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T8, TP2, TP13</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Benzyl bromide</ENT> <ENT>6.1</ENT> <ENT>UN1737</ENT> <ENT>II</ENT> <ENT>6.1, 8</ENT> <ENT>A3, A7, IB2, N33, N34, T8, TP2, TP13</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>D</ENT> <ENT>13, 40.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Benzyl chloride</ENT> <ENT>6.1</ENT> <ENT>UN1738</ENT> <ENT>II</ENT> <ENT>6.1, 8</ENT> <ENT>A3, A7, B70, IB2, N33, N42, T8, TP2, TP13</ENT> <ENT>None</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>D</ENT> <ENT>13, 40.</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzyl chloride <E T="03">unstabilized</E> </ENT> <ENT>6.1</ENT> <ENT>UN1738</ENT> <ENT>II</ENT> <ENT>6.1, 8</ENT> <ENT>A3, A7, B8, B11, IB2, N33, N34, N43, T8, TP2, TP13</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>D</ENT> <ENT>13, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzyl chloroformate</ENT> <ENT>8</ENT> <ENT>UN1739</ENT> <ENT>I</ENT> <ENT>8</ENT> <ENT>A3, A6, B4, N41, T10, TP2, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>2.5 L</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzyl iodide</ENT> <ENT>6.1</ENT> <ENT>UN2653</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>12, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzyldimethylamine</ENT> <ENT>8</ENT> <ENT>UN2619</ENT> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>40, 48</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Benzylidene chloride</ENT> <ENT>6.1</ENT> <ENT>UN1886</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Beryllium compounds, n.o.s.</ENT> <ENT>6.1</ENT> <ENT>UN1566</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Beryllium nitrate</ENT> <ENT>5.1</ENT> <ENT>UN2464</ENT> <ENT>II</ENT> <ENT>5.1, 6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Beryllium, powder</ENT> <ENT>6.1</ENT> <ENT>UN1567</ENT> <ENT>II</ENT> <ENT>6.1, 4.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bicyclo [2,2,1] hepta-2,5-diene, stabilized <E T="03">or</E> 2,5-Norbornadiene, stabilized</ENT> <ENT>3</ENT> <ENT>UN2251</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>D</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Biological substance, Category B</ENT> <ENT>6.2</ENT> <ENT>UN3373</ENT> <ENT/> <ENT/> <ENT>A82</ENT> <ENT>134</ENT> <ENT>199</ENT> <ENT>None</ENT> <ENT>4 L or 4 kg</ENT> <ENT>4 L or 4 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Biphenyl triozonide</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bipyridilium pesticides, liquid, flammable, toxic, <E T="03">flash point less than 23 degrees C</E> </ENT> <ENT>3</ENT> <ENT>UN2782</ENT> <ENT>I</ENT> <ENT>3, 6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bipyridilium pesticides, liquid, toxic</ENT> <ENT>6.1</ENT> <ENT>UN3016</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <PRTPAGE P="152"/> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T7, TP2, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bipyridilium pesticides, liquid, toxic, flammable, <E T="03">flash point not less than 23 degrees C</E> </ENT> <ENT>6.1</ENT> <ENT>UN3015</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>T14, TP2, TP13, TP27</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>21, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1, 3</ENT> <ENT>IB2, T11, TP2, TP13, TP27</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>21, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1, 3</ENT> <ENT>B1, IB3, T7, TP2, TP28</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>21, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bipyridilium pesticides, solid, toxic</ENT> <ENT>6.1</ENT> <ENT>UN2781</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Bis (Aminopropyl) piperazine, see</E> Corrosive liquid, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bisulfate, aqueous solution</ENT> <ENT>8</ENT> <ENT>UN2837</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>A7, B2, IB2, N34, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>A7, IB3, N34, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bisulfites, aqueous solutions, n.o.s.</ENT> <ENT>8</ENT> <ENT>UN2693</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T7, TP1, TP28</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Black powder, compressed <E T="03">or</E> Gunpowder, compressed <E T="03">or</E> Black powder, in pellets <E T="03">or</E> Gunpowder, in pellets</ENT> <ENT>1.1D</ENT> <ENT>UN0028</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>10</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Black powder <E T="03">or</E> Gunpowder, <E T="03">granular or as a meal</E> </ENT> <ENT>1.1D</ENT> <ENT>UN0027</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>10</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> D</ENT> <ENT>Black powder for small arms</ENT> <ENT>4.1</ENT> <ENT>NA0027</ENT> <ENT>I</ENT> <ENT>4.1</ENT> <ENT>70</ENT> <ENT>None</ENT> <ENT>170</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>E</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Blasting agent, n.o.s., see</E> Explosives, blasting <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Blasting cap assemblies, see</E> Detonator assemblies, non-electric, <E T="03">for blasting</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Blasting caps, electric, see</E> Detonators, electric <E T="03">for blasting</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Blasting caps, non-electric, see</E> Detonators, non-electric, <E T="03">for blasting</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Bleaching powder, see</E> Calcium hypochlorite mixtures, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"> I</ENT> <ENT>Blue asbestos <E T="03">(Crocidolite) or</E> Brown asbestos <E T="03">(amosite, mysorite)</E> </ENT> <ENT>9</ENT> <ENT>UN2212</ENT> <ENT>II</ENT> <ENT>9</ENT> <ENT>156, IB8, IP2, IP4, T3, TP33</ENT> <ENT>155</ENT> <ENT>216</ENT> <ENT>240</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>A</ENT> <ENT>34, 40</ENT> </ROW> <ROW> <PRTPAGE P="153"/> <ENT I="01"/> <ENT>Bombs, photo-flash</ENT> <ENT>1.1F</ENT> <ENT>UN0037</ENT> <ENT>II</ENT> <ENT>1.1F</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, photo-flash</ENT> <ENT>1.1D</ENT> <ENT>UN0038</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, photo-flash</ENT> <ENT>1.2G</ENT> <ENT>UN0039</ENT> <ENT>II</ENT> <ENT>1.2G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, photo-flash</ENT> <ENT>1.3G</ENT> <ENT>UN0299</ENT> <ENT>II</ENT> <ENT>1.3G</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, smoke, non-explosive, <E T="03">with corrosive liquid, without initiating device</E> </ENT> <ENT>8</ENT> <ENT>UN2028</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT/> <ENT>None</ENT> <ENT>160</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>50 kg</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, <E T="03">with bursting charge</E> </ENT> <ENT>1.1F</ENT> <ENT>UN0033</ENT> <ENT>II</ENT> <ENT>1.1F</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, <E T="03">with bursting charge</E> </ENT> <ENT>1.1D</ENT> <ENT>UN0034</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, <E T="03">with bursting charge</E> </ENT> <ENT>1.2D</ENT> <ENT>UN0035</ENT> <ENT>II</ENT> <ENT>1.2D</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>62</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>03</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs, <E T="03">with bursting charge</E> </ENT> <ENT>1.2F</ENT> <ENT>UN0291</ENT> <ENT>II</ENT> <ENT>1.2F</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>08</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs with flammable liquid, <E T="03">with bursting charge</E> </ENT> <ENT>1.1J</ENT> <ENT>UN0399</ENT> <ENT>II</ENT> <ENT>1.1J</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>04</ENT> <ENT>23E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bombs with flammable liquid, <E T="03">with bursting charge</E> </ENT> <ENT>1.2J</ENT> <ENT>UN0400</ENT> <ENT>II</ENT> <ENT>1.2J</ENT> <ENT/> <ENT/> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>04</ENT> <ENT>23E</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boosters with detonator</ENT> <ENT>1.1B</ENT> <ENT>UN0225</ENT> <ENT>II</ENT> <ENT>1.1B</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>11</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Boosters with detonator</ENT> <ENT>1.2B</ENT> <ENT>UN0268</ENT> <ENT>II</ENT> <ENT>1.2B</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Boosters, <E T="03">without detonator</E> </ENT> <ENT>1.1D</ENT> <ENT>UN0042</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Boosters, <E T="03">without detonator</E> </ENT> <ENT>1.2D</ENT> <ENT>UN0283</ENT> <ENT>II</ENT> <ENT>1.2D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Borate and chlorate mixtures, see</E> Chlorate and borate mixtures</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Borneol</ENT> <ENT>4.1</ENT> <ENT>UN1312</ENT> <ENT>III</ENT> <ENT>4.1</ENT> <ENT>A1, IB8, IP3, T1, TP33</ENT> <ENT>None</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"> +</ENT> <ENT>Boron tribromide</ENT> <ENT>8</ENT> <ENT>UN2692</ENT> <ENT>I</ENT> <ENT>8, 6.1</ENT> <ENT>2, B9, B14, B32, N34, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>C</ENT> <ENT>12</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trichloride</ENT> <ENT>2.3</ENT> <ENT>UN1741</ENT> <ENT/> <ENT>2.3, 8</ENT> <ENT>3, B9, B14</ENT> <ENT>None</ENT> <ENT>304</ENT> <ENT>314</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>25, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride</ENT> <ENT>2.3</ENT> <ENT>UN1008</ENT> <ENT/> <ENT>2.3, 8</ENT> <ENT>2, B9, B14</ENT> <ENT>None</ENT> <ENT>302</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride acetic acid complex, liquid</ENT> <ENT>8</ENT> <ENT>UN1742</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, B6, IB2, T8, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride acetic acid complex, solid</ENT> <ENT>8</ENT> <ENT>UN3419</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, B6, IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride diethyl etherate</ENT> <ENT>8</ENT> <ENT>UN2604</ENT> <ENT>I</ENT> <ENT>8, 3</ENT> <ENT>A3, A19, T10, TP2</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>0.5 L</ENT> <ENT>2.5 L</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride dihydrate</ENT> <ENT>8</ENT> <ENT>UN2851</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>B</ENT> <ENT>12, 40,</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride dimethyl etherate</ENT> <ENT>4.3</ENT> <ENT>UN2965</ENT> <ENT>I</ENT> <ENT>4.3, 8, 3</ENT> <ENT>A19, T10, TP2, TP7</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>1 L</ENT> <ENT>D</ENT> <ENT>21, 28, 40, 49, 100</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride propionic acid complex, liquid</ENT> <ENT>8</ENT> <ENT>UN1743</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T8, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Boron trifluoride propionic acid complex, solid</ENT> <ENT>8</ENT> <ENT>UN3420</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Box toe gum, see</E> Nitrocellulose <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bromates, inorganic, aqueous solution, n.o.s.</ENT> <ENT>5.1</ENT> <ENT>UN3213</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>152</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>5.1</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>152</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>2.5 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromates, inorganic, n.o.s.</ENT> <ENT>5.1</ENT> <ENT>UN1450</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>56, 58</ENT> </ROW> <ROW> <ENT I="01">+</ENT> <ENT>Bromine</ENT> <ENT>8</ENT> <ENT>UN1744</ENT> <ENT>I</ENT> <ENT>8, 6.1</ENT> <ENT>1, B9, B85, N34, N43, T22, TP2, TP10, TP13</ENT> <ENT>None</ENT> <ENT>226</ENT> <ENT>249</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>12, 40, 66, 74, 89, 90</ENT> </ROW> <ROW> <PRTPAGE P="154"/> <ENT I="01"/> <ENT> <E T="03">Bromine azide</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bromine chloride</ENT> <ENT>2.3</ENT> <ENT>UN2901</ENT> <ENT/> <ENT>2.3, 8, 5.1</ENT> <ENT>2, B9, B14, N86</ENT> <ENT>None</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40, 89, 90</ENT> </ROW> <ROW> <ENT I="01"> +</ENT> <ENT>Bromine pentafluoride</ENT> <ENT>5.1</ENT> <ENT>UN1745</ENT> <ENT>I</ENT> <ENT>5.1, 6.1, 8</ENT> <ENT>1, B9, B14, B30, T22, TP2, TP13, TP38, TP44</ENT> <ENT>None</ENT> <ENT>228</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>25, 40, 66, 90</ENT> </ROW> <ROW> <ENT I="01">+</ENT> <ENT>Bromine solutions</ENT> <ENT>8</ENT> <ENT>UN1744</ENT> <ENT>I</ENT> <ENT>8, 6.1</ENT> <ENT>1, B9, B85, N34, N43, T22, TP2, TP10, TP13</ENT> <ENT>None</ENT> <ENT>226</ENT> <ENT>249</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>12, 40, 66, 74, 89, 90</ENT> </ROW> <ROW> <ENT I="01">+</ENT> <ENT>Bromine solutions</ENT> <ENT>8</ENT> <ENT>UN1744</ENT> <ENT>I</ENT> <ENT>8, 6.1</ENT> <ENT>2, B9, B85, N34, N43, T22, TP2, TP10, TP13</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>249</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>12, 40, 66, 74, 89, 90</ENT> </ROW> <ROW> <ENT I="01"> +</ENT> <ENT>Bromine trifluoride</ENT> <ENT>5.1</ENT> <ENT>UN1746</ENT> <ENT>I</ENT> <ENT>5.1, 6.1, 8</ENT> <ENT>2, B9, B14, B32, T22, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>228</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>25, 40, 66, 90</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">4-Bromo-1,2-dinitrobenzene</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">4-Bromo-1,2-dinitrobenzene (unstable at 59 degrees C)</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>1-Bromo-3-chloropropane</ENT> <ENT>6.1</ENT> <ENT>UN2688</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>1-Bromo-3-methylbutane</ENT> <ENT>3</ENT> <ENT>UN2341</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">1-Bromo-3-nitrobenzene (unstable at 56 degrees C</E>)</ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>2-Bromo-2-nitropropane-1,3-diol</ENT> <ENT>4.1</ENT> <ENT>UN3241</ENT> <ENT>III</ENT> <ENT>4.1</ENT> <ENT>46, IB8, IP3</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>None</ENT> <ENT>25 kg</ENT> <ENT>50 kg</ENT> <ENT>C</ENT> <ENT>12, 25, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromoacetic acid, solid</ENT> <ENT>8</ENT> <ENT>UN3425</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>A7, IB8, IP2, IP4, N34, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bromoacetic acid solution</ENT> <ENT>8</ENT> <ENT>UN1938</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>A7, B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>8</ENT> <ENT>B2, IB3, T7, TP2</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"> +</ENT> <ENT>Bromoacetone</ENT> <ENT>6.1</ENT> <ENT>UN1569</ENT> <ENT>II</ENT> <ENT>6.1, 3</ENT> <ENT>2, T20, TP2, TP13</ENT> <ENT>None</ENT> <ENT>193</ENT> <ENT>245</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromoacetyl bromide</ENT> <ENT>8</ENT> <ENT>UN2513</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T8, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40, 53</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromobenzene</ENT> <ENT>3</ENT> <ENT>UN2514</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bromobenzyl cyanides, liquid</ENT> <ENT>6.1</ENT> <ENT>UN1694</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>T14, TP2, TP13</ENT> <ENT>None</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>D</ENT> <ENT>12, 40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromobenzyl cyanides, solid</ENT> <ENT>6.1</ENT> <ENT>UN3449</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>D</ENT> <ENT>12, 40, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>1-Bromobutane</ENT> <ENT>3</ENT> <ENT>UN1126</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>2-Bromobutane</ENT> <ENT>3</ENT> <ENT>UN2339</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>B1, IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromochloromethane</ENT> <ENT>6.1</ENT> <ENT>UN1887</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="155"/> <ENT I="01"/> <ENT>2-Bromoethyl ethyl ether</ENT> <ENT>3</ENT> <ENT>UN2340</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromoform</ENT> <ENT>6.1</ENT> <ENT>UN2515</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>12, 40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromomethylpropanes</ENT> <ENT>3</ENT> <ENT>UN2342</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>2-Bromopentane</ENT> <ENT>3</ENT> <ENT>UN2343</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bromopropanes</ENT> <ENT>3</ENT> <ENT>UN2344</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>3-Bromopropyne</ENT> <ENT>3</ENT> <ENT>UN2345</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Bromosilane</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Bromotoluene-alpha, see</E> Benzyl bromide</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bromotrifluoroethylene</ENT> <ENT>2.1</ENT> <ENT>UN2419</ENT> <ENT/> <ENT>2.1</ENT> <ENT/> <ENT>None</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>150 kg</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Bromotrifluoromethane <E T="03">or</E> Refrigerant gas, R 13B1.</ENT> <ENT>2.2</ENT> <ENT>UN1009</ENT> <ENT/> <ENT>2.2</ENT> <ENT>T50</ENT> <ENT>306</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>75 kg</ENT> <ENT>150 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Brucine</ENT> <ENT>6.1</ENT> <ENT>UN1570</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Bursters, <E T="03">explosive</E> </ENT> <ENT>1.1D</ENT> <ENT>UN0043</ENT> <ENT>II</ENT> <ENT>1.1D</ENT> <ENT/> <ENT>None</ENT> <ENT>62</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>07</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butadienes, stabilized <E T="03">or</E> Butadienes and Hydrocarbon mixture, stabilized <E T="03">containing more than 40% butadienes</E> </ENT> <ENT>2.1</ENT> <ENT>UN1010</ENT> <ENT/> <ENT>2.1</ENT> <ENT>T50</ENT> <ENT>306</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>150 kg</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butane <E T="03">see also</E> Petroleum gases, liquefied</ENT> <ENT>2.1</ENT> <ENT>UN1011</ENT> <ENT/> <ENT>2.1</ENT> <ENT>19, T50</ENT> <ENT>306</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>150 kg</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Butane, butane mixtures and mixtures having similar properties in cartridges each not exceeding 500 grams, see</E> Receptacles, <E T="03">etc</E> </ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butanedione</ENT> <ENT>3</ENT> <ENT>UN2346</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">1,2,4-Butanetriol trinitrate</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butanols</ENT> <ENT>3</ENT> <ENT>UN1120</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1, TP29</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">tert-Butoxycarbonyl azide</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl acetates</ENT> <ENT>3</ENT> <ENT>UN1123</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl acid phosphate</ENT> <ENT>8</ENT> <ENT>UN1718</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl acrylates, stabilized</ENT> <ENT>3</ENT> <ENT>UN2348</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Butyl alcohols, see</E> Butanols</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl benzenes</ENT> <ENT>3</ENT> <ENT>UN2709</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">n-Butyl bromide, see</E> 1-Bromobutane</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">n-Butyl chloride, see</E> Chlorobutanes</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01">D</ENT> <ENT>sec-Butyl chloroformate</ENT> <ENT>6.1</ENT> <ENT>NA2742</ENT> <ENT>I</ENT> <ENT>6.1, 3, 8</ENT> <ENT>2, B9, B14, B32, B74, T20, TP4, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>A</ENT> <ENT>12, 13, 22, 25, 40, 48, 100</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>n-Butyl chloroformate</ENT> <ENT>6.1</ENT> <ENT>UN2743</ENT> <ENT>I</ENT> <ENT>6.1, 8, 3</ENT> <ENT>2, B9, B14, B32, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>A</ENT> <ENT>12, 13, 21, 25, 40, 100</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Butyl ethers, see</E> Dibutyl ethers</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Butyl ethyl ether, see</E> Ethyl butyl ether</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>n-Butyl formate</ENT> <ENT>3</ENT> <ENT>UN1128</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <PRTPAGE P="156"/> <ENT I="01"/> <ENT> <E T="03">tert-Butyl hydroperoxide, with more than 90 percent with water</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>tert-Butyl hypochlorite</ENT> <ENT>4.2</ENT> <ENT>UN3255</ENT> <ENT>I</ENT> <ENT>4.2, 8</ENT> <ENT/> <ENT>None</ENT> <ENT>211</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>N-n-Butyl imidazole</ENT> <ENT>6.1</ENT> <ENT>UN2690</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>tert-Butyl isocyanate</ENT> <ENT>6.1</ENT> <ENT>UN2484</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>1, B9, B14, B30, B72, T22, TP2, TP13, TP38, TP44</ENT> <ENT>None</ENT> <ENT>226</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>n-Butyl isocyanate</ENT> <ENT>6.1</ENT> <ENT>UN2485</ENT> <ENT>I</ENT> <ENT>6.1, 3</ENT> <ENT>2, B9, B14, B32, B77, T20, TP2, TP13, TP38, TP45</ENT> <ENT>None</ENT> <ENT>227</ENT> <ENT>244</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl mercaptans</ENT> <ENT>3</ENT> <ENT>UN2347</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>A3, A6, IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>D</ENT> <ENT>52, 95</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>n-Butyl methacrylate, stabilized</ENT> <ENT>3</ENT> <ENT>UN2227</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl methyl ether</ENT> <ENT>3</ENT> <ENT>UN2350</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl nitrites</ENT> <ENT>3</ENT> <ENT>UN2351</ENT> <ENT>I</ENT> <ENT>3</ENT> <ENT>T11, TP1, TP8, TP27</ENT> <ENT>150</ENT> <ENT>201</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">tert-Butyl peroxyacetate, with more than 76 percent in solution</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">n-Butyl peroxydicarbonate, with more than 52 percent in solution</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">tert-Butyl peroxyisobutyrate, with more than 77 percent in solution</E> </ENT> <ENT>Forbidden</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Butyl phosphoric acid, see</E> Butyl acid phosphate</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl propionates</ENT> <ENT>3</ENT> <ENT>UN1914</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>5-tert-Butyl-2,4,6-trinitro-m-xylene <E T="03">or</E> Musk xylene</ENT> <ENT>4.1</ENT> <ENT>UN2956</ENT> <ENT>III</ENT> <ENT>4.1</ENT> <ENT>159</ENT> <ENT>None</ENT> <ENT>223</ENT> <ENT>None</ENT> <ENT>Forbidden</ENT> <ENT>Forbidden</ENT> <ENT>D</ENT> <ENT>12, 25, 48, 127</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butyl vinyl ether, stabilized</ENT> <ENT>3</ENT> <ENT>UN2352</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>n-Butylamine</ENT> <ENT>3</ENT> <ENT>UN1125</ENT> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>IB2, T7, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>N-Butylaniline</ENT> <ENT>6.1</ENT> <ENT>UN2738</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB2, T7, TP2</ENT> <ENT>153</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>74</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>tert-Butylcyclohexylchloroformate</ENT> <ENT>6.1</ENT> <ENT>UN2747</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT>12, 13, 25</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butylene <E T="03">see also</E> Petroleum gases, liquefied</ENT> <ENT>2.1</ENT> <ENT>UN1012</ENT> <ENT/> <ENT>2.1</ENT> <ENT>19, T50</ENT> <ENT>306</ENT> <ENT>304</ENT> <ENT>314, 315</ENT> <ENT>Forbidden</ENT> <ENT>150 kg</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>1,2-Butylene oxide, stabilized</ENT> <ENT>3</ENT> <ENT>UN3022</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT>27, 49</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butyltoluenes</ENT> <ENT>6.1</ENT> <ENT>UN2667</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>153</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyltrichlorosilane</ENT> <ENT>8</ENT> <ENT>UN1747</ENT> <ENT>II</ENT> <ENT>8, 3</ENT> <ENT>A7, B2, B6, N34, T10, TP2, TP7, TP13</ENT> <ENT>None</ENT> <ENT>206</ENT> <ENT>243</ENT> <ENT>Forbidden</ENT> <ENT>30 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <PRTPAGE P="157"/> <ENT I="01"/> <ENT>1,4-Butynediol</ENT> <ENT>6.1</ENT> <ENT>UN2716</ENT> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>A1, IB8, IP3, T1, TP33</ENT> <ENT>None</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>C</ENT> <ENT>52, 53, 70</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butyraldehyde</ENT> <ENT>3</ENT> <ENT>UN1129</ENT> <ENT>II</ENT> <ENT>3</ENT> <ENT>IB2, T4, TP1</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>B</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyraldoxime</ENT> <ENT>3</ENT> <ENT>UN2840</ENT> <ENT>III</ENT> <ENT>3</ENT> <ENT>B1, IB3, T2, TP1</ENT> <ENT>150</ENT> <ENT>203</ENT> <ENT>242</ENT> <ENT>60 L</ENT> <ENT>220 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyric acid</ENT> <ENT>8</ENT> <ENT>UN2820</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>12</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butyric anhydride</ENT> <ENT>8</ENT> <ENT>UN2739</ENT> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Butyronitrile</ENT> <ENT>3</ENT> <ENT>UN2411</ENT> <ENT>II</ENT> <ENT>3, 6.1</ENT> <ENT>IB2, T7, TP1, TP13</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>60 L</ENT> <ENT>E</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Butyryl chloride</ENT> <ENT>3</ENT> <ENT>UN2353</ENT> <ENT>II</ENT> <ENT>3, 8</ENT> <ENT>IB2, T8, TP2, TP13</ENT> <ENT>150</ENT> <ENT>202</ENT> <ENT>243</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>C</ENT> <ENT>40</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Cacodylic acid</ENT> <ENT>6.1</ENT> <ENT>UN1572</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4,T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>E</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Cadmium compounds</ENT> <ENT>6.1</ENT> <ENT>UN2570</ENT> <ENT>I</ENT> <ENT>6.1</ENT> <ENT>IB7, IP1, T6, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>6.1</ENT> <ENT>IB8, IP3, T1, TP33</ENT> <ENT>153</ENT> <ENT>213</ENT> <ENT>240</ENT> <ENT>100 kg</ENT> <ENT>200 kg</ENT> <ENT>A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Caesium hydroxide</ENT> <ENT>8</ENT> <ENT>UN2682</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>154</ENT> <ENT>212</ENT> <ENT>240</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>A</ENT> <ENT>29, 52.</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Caesium hydroxide solution</ENT> <ENT>8</ENT> <ENT>UN2681</ENT> <ENT>II</ENT> <ENT>8</ENT> <ENT>B2, IB2, T7, TP2</ENT> <ENT>154</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>30 L</ENT> <ENT>A</ENT> <ENT>29, 52</ENT> </ROW> <ROW> <ENT I="22" O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT O="xl"/> <ENT>III</ENT> <ENT>8</ENT> <ENT>IB3, T4, TP1</ENT> <ENT>154</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>5 L</ENT> <ENT>60 L</ENT> <ENT>A</ENT> <ENT>29, 52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Calcium</ENT> <ENT>4.3</ENT> <ENT>UN1401</ENT> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>IB7, IP2, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>241</ENT> <ENT>15 kg</ENT> <ENT>50kg</ENT> <ENT>E</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="22"/> <ENT>Calcium arsenate</ENT> <ENT>6.1</ENT> <ENT>UN1573</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT O="xl">A</ENT> <ENT/> </ROW> <ROW> <ENT I="22"/> <ENT>Calcium arsenate and calcium arsenite, mixtures, solid</ENT> <ENT>6.1</ENT> <ENT>UN1574</ENT> <ENT>II</ENT> <ENT>6.1</ENT> <ENT>IB8, IP2, IP4, T3, TP33</ENT> <ENT>153</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT O="xl">A</ENT> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT> <E T="03">Calcium bisulfite solution, see</E> Bisulfites, aqueous solutions, n.o.s.</ENT> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> <ENT/> </ROW> <ROW> <ENT I="01"/> <ENT>Calcium carbide</ENT> <ENT>4.3</ENT> <ENT>UN1402</ENT> <ENT>I</ENT> <ENT>4.3</ENT> <ENT>A1, A8, B55, B59, IB4, IP1, N34, T9, TP7, TP33</ENT> <ENT>None</ENT> <ENT>211</ENT> <ENT>242</ENT> <ENT>Forbidden</ENT> <ENT>15 kg</ENT> <ENT>B</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>II</ENT> <ENT>4.3</ENT> <ENT>A1, A8, B55, B59, IB7, IP2, N34, T3, TP33</ENT> <ENT>151</ENT> <ENT>212</ENT> <ENT>241</ENT> <ENT>15 kg</ENT> <ENT>50 kg</ENT> <ENT>B</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Calcium chlorate</ENT> <ENT>5.1</ENT> <ENT>UN1452</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>A9, IB8, IP2, IP4, N34, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>56, 58</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Calcium chlorate aqueous solution</ENT> <ENT>5.1</ENT> <ENT>UN2429</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>A2, IB2, N41, T4, TP1</ENT> <ENT>152</ENT> <ENT>202</ENT> <ENT>242</ENT> <ENT>1 L</ENT> <ENT>5 L</ENT> <ENT>B</ENT> <ENT>56, 58, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT/> <ENT/> <ENT/> <ENT>III</ENT> <ENT>5.1</ENT> <ENT>A2, IB2, N41, T4, TP1</ENT> <ENT>152</ENT> <ENT>203</ENT> <ENT>241</ENT> <ENT>2.5 L</ENT> <ENT>30 L</ENT> <ENT>B</ENT> <ENT>56, 68, 133</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Calcium chlorite</ENT> <ENT>5.1</ENT> <ENT>UN1453</ENT> <ENT>II</ENT> <ENT>5.1</ENT> <ENT>A9, IB8, IP2, IP4, N34, T3, TP33</ENT> <ENT>152</ENT> <ENT>212</ENT> <ENT>242</ENT> <ENT>5 kg</ENT> <ENT>25 kg</ENT> <ENT>A</ENT> <ENT>56, 58</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Calcium cyanamide <E T="03">with more than 0.1 percent of calcium carbide</E> </ENT> <ENT>4.3</ENT> <ENT>UN1403</ENT> <ENT>III</ENT> <ENT>4.3</ENT> <ENT>A1, A19, IB8, IP4, T1, TP33</ENT> <ENT>151</ENT> <ENT>213</ENT> <ENT>241</ENT> <ENT>25 kg</ENT> <ENT>100 kg</ENT> <ENT>A</ENT> <ENT>52</ENT> </ROW> <ROW> <ENT I="01"/> <ENT>Calciu