<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="cfr.xsl"?>
<CFRGRANULE xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CFRMergedXML.xsd">
  <FDSYS>
    <CFRTITLE>16</CFRTITLE>
    <CFRTITLETEXT>Commercial Practices</CFRTITLETEXT>
    <VOL>2</VOL>
    <DATE>2012-01-01</DATE>
    <ORIGINALDATE>2012-01-01</ORIGINALDATE>
    <COVERONLY>false</COVERONLY>
    <TITLE>Handles and spikes.</TITLE>
    <GRANULENUM>1507.7</GRANULENUM>
    <HEADING>Section 1507.7</HEADING>
    <ANCESTORS>
      <PARENT HEADING="Title 16" SEQ="3">Commercial Practices</PARENT>
      <PARENT HEADING="CHAPTER II" SEQ="2">CONSUMER PRODUCT SAFETY COMMISSION</PARENT>
      <PARENT HEADING="SUBCHAPTER C" SEQ="1">FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS</PARENT>
      <PARENT HEADING="PART 1507" SEQ="0">FIREWORKS DEVICES</PARENT>
    </ANCESTORS>
  </FDSYS>
  <SECTION>
    <SECTNO>§ 1507.7</SECTNO>
    <SUBJECT>Handles and spikes.</SUBJECT>
    <P>(a) Fireworks devices which are intended to be hand-held and are so labeled shall incorporate a handle at least 4 inches in length (see § 1500.14(b)(7)). Handles shall remain firmly attached during transportation, handling and full operation of the device, or shall consist of an integral section of the device at least four inches below the pyrotechnic chamber.</P>
    <P>(b) Spikes provided with fireworks devices shall protrude at least 2 inches from the base of the device and shall have a blunt tip not less than <FR>1/8</FR>-inch in diameter of <FR>1/8</FR>-inch square.</P>
  </SECTION>
</CFRGRANULE>
