[Federal Register Volume 76, Number 57 (Thursday, March 24, 2011)]
[Proposed Rules]
[Pages 16588-16592]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-6912]
=======================================================================
-----------------------------------------------------------------------
POSTAL SERVICE
39 CFR Parts 111 and 121
Combined Mailings of Standard Mail and Periodicals Flats
AGENCY: Postal Service\TM\.
ACTION: Proposed rule.
-----------------------------------------------------------------------
SUMMARY: The Postal Service is proposing to revise Mailing Standards of
the United States Postal Service, Domestic Mail Manual (DMM[supreg])
705.14 and 708.1.1 to provide a new option for mailers to combine
Standard Mail[supreg] flats and Periodicals flats within the same
bundle, when placed on pallets, and to combine bundles of Standard Mail
flats and bundles of Periodicals flats on the same pallet. The Postal
Service also proposes to revise section 121.2 of title 39, Code of
Federal Regulations to reflect that the Standard Mail service standards
apply to all Periodicals flats pieces entered in such combined
mailings.
DATES: We must receive your comments on or before April 25, 2011.
ADDRESSES: Mail or deliver written comments to the Manager, Mailing
Standards, U.S. Postal Service, 475 L'Enfant Plaza, SW., Room 4446,
[[Page 16589]]
Washington, DC 20260-4446. You may inspect and photocopy all written
comments at USPS[supreg] Headquarters Library, 475 L'Enfant Plaza, SW.,
11th Floor N, Washington, DC between 9 a.m. and 4 p.m., Monday through
Friday. E-mail comments, containing the name and address of the
commenter, may be sent to: MailingStandards@usps.gov, with a subject
line of ``Standard Mail and Periodicals Combined Mailings.'' Faxed
comments are not accepted.
FOR FURTHER INFORMATION CONTACT: Jonathan Leon at 202-268-7443, or
Kevin Gunther at 202-268-7208.
SUPPLEMENTARY INFORMATION: The Postal Service is proposing to provide a
new option for mailers to combine Standard Mail flats and Periodicals
flats, when bundled and placed on pallets. Mailers using this option
may combine different-class mailpieces within the same bundle (comail),
or combine separate same-class bundles (of different classes) on the
same pallet (copalletize) to maximize presorting or to qualify for
deeper destination entry discounts. All mailpieces prepared under this
option will be required to be bundled and placed on pallets. Combining
mailings enhances operational efficiencies within postal processing by
allowing mailers to place mailpieces in bundles on pallets that might
have been placed in sacks if prepared separately.
The Postal Service originally provided notice of this new option on
February 28, 2011, through a final rule, Federal Register notice
(10757-10761). In consideration of concerns expressed by members of the
mailing community, the Postal Service has elected to publish this
proposed rule in lieu of the February 28, 2011 final rule. Interested
individuals are encouraged to provide comments as provided above.
This new option will not change current DMM content and eligibility
standards applicable to Periodicals and Standard Mail. Mailers using
this option will continue to be required to meet the minimum volume
standards for Standard Mail of 200 pieces or 50 pounds. Periodicals
publications must be authorized or have a pending authorization to mail
at Periodicals prices. The current processes that identify and isolate
Periodicals origin mixed area distribution center (OMX) mailpieces, for
integration into the First-Class Mail[supreg] mailstream, will not be
available when combining Standard Mail flats and Periodicals flats on
pallets. All mailpieces included in a combined mailing of Standard Mail
and Periodicals flats on pallets must be machinable in accordance with
DMM 301.3.0.
Mailers wishing to combine Standard Mail and Periodicals flats
under this option will be required to submit a request for
authorization, in writing, to the Manager, Business Mailer Support (see
DMM 608.8.1 for contact information).
All mailpieces included in a combined mailing of Periodicals flats
and Standard Mail flats will be required to meet the standards for a
full-service automation mailing. Intelligent Mail[supreg] barcodes
placed on mailpieces prepared under this program will be required to
include Service Type Identifiers appropriate for the class of mail of
the individual mailpiece.
Participating mailers will be required to present standardized
electronic mailing documentation for each combined mailing, and at the
time of mailing, the following additional documentation:
An edition or version summary for all pieces in the
mailing.
A consolidated postage statement register and postage
statement for each Periodicals publication in the combined mailing.
A consolidated postage statement register and postage
statement for each Standard Mail mailing in the combined mailing.
Mailers may provide a single consolidated postage statement and postage
statement register of all Standard Mail mailings if they are itemized.
A register of Forms 8125, Plant Verified Drop Shipment
(PVDS) Verification and Clearance, (PS 8125C) that consolidates all of
the mailings to the destinations where the mail is entered.
When using this option, postage on all Standard Mail pieces must be
paid through a permit imprint using a special postage payment system at
the Post Office\TM\ serving the mailer.
Postage for Periodicals may be paid through an advance deposit
account or through a Centralized Account Payment System (CAPS) account.
Participating mailers will be required to apportion the Periodicals
bundle charge based on the number of Periodicals copies in the bundles
and container charge based on the weight of the Periodicals portion of
the container.
Mailers combining Standard Mail flats and Periodicals flats will
not have the option to form ADC pallets or to dropship to ADCs. As a
result, Periodicals publications included in combined mailings will not
have access to DADC prices. Other specific prices for Periodicals flats
in a combined mailing will be assessed as follows:
The bundle prices applicable to the ADC container level
will be applied to the ASF/NDC container level.
The container prices applicable to the ADC pallet level
will apply to the ASF/NDC pallet level.
The bundle price applicable to the ADC bundle placed on
the ADC container level will apply to mixed ADC bundles placed on mixed
NDC pallets.
The container price applicable to the ADC pallet level
will also apply to the mixed NDC pallet level.
Standard Mail flats and Periodicals flats combined on pallets will
be processed as Standard Mail; and the Periodicals mailpieces included
within these combined mailings may receive deferred handling.
Periodicals mailpieces included within mailings of combined Standard
Mail flats and Periodicals flats will be subject to the USPS service
standards applicable to Standard Mail. These mailings must also be
identified as Standard Mail when scheduling dropship appointments in
the Facility Access and Shipment (FAST[supreg]) system.
Mailers combining Standard Mail flats and Periodicals flats on
pallets must populate field 10, ``Product or Publication Title or
Names,'' of PS Form 8125 and/or field 11b, ``Product Name/ID,'' of PS
Form 8125C with ``MIX COMAIL'' when preparing dropship documentation
for these mailings.
Any mixed NDC pallets prepared under this program will be required
to be entered at the NDC servicing the 3-digit ZIP CodeTM of
the entry Post Office for the mailer's plant. Mailers combining
Standard Mail flats and Periodicals flats on pallets may reallocate
bundles under DMM 705.8.11 and 705.8.13.
Each Standard Mail and Periodicals mailpiece prepared under a
combined mailing of Standard Mail flats and Periodicals flats will be
required to be identified as containing mixed classes through the use
of an optional endorsement line (OEL) in accordance with the proposed
standards.
Mailers preparing combined mailings of Standard Mail flats and
Periodicals flats will be required to provide a written notification to
each participating Periodicals publisher that describes the combined
mailing process and the potential for pieces to receive deferred USPS
handling. These notifications, signed and dated by the Periodicals
publisher, will be required to be retained by the mailer and must be
available for review by the USPS upon request.
Although we are exempt from the notice and comment requirements of
the Administrative Procedure Act [5 U.S.C.
[[Page 16590]]
553(b), (c)] regarding proposed rulemaking by 39 U.S.C. 410(a), we
invite public comment on the following proposed revisions to Mailing
Standards of the United States Postal Service, Domestic Mail Manual
(DMM), incorporated by reference in the Code of Federal Regulations.
See 39 CFR 111.1.
The Postal Service also proposes to amend 39 CFR 121.2 by adding a
new item c to describe the USPS processing of Periodicals mailpieces
included in combined mailings of Standard Mail flats and Periodicals
flats, and specifying that Periodicals mailpieces included in these
mailings will be assigned the service standards applicable to Standard
Mail pieces.
List of Subjects in 39 CFR Parts 111 and 121
Administrative practice and procedure, Postal Service.
Accordingly, 39 CFR part 111 is proposed to be amended as follows:
PART 111--[AMENDED]
1. The authority citation for 39 CFR Part 111 continues to read as
follows:
Authority: 5 U.S.C. 552(a); 13 U.S.C. 301-307; 39 U.S.C. 101,
401, 403, 404, 407, 414, 416, 3001-3011, 3201-3219, 3403-3406, 3621,
3622, 3626, 3632, 3633 and 5001.
2. Revise the following sections of Mailing Standards of the United
States Postal Service, Domestic Mail Manual (DMM) as follows:
Mailing Standards of the United States Postal Service, Domestic Mail
Manual (DMM)
* * * * *
700 Special Services
* * * * *
705 Advanced Preparation and Special Postage Payment Systems
* * * * *
8.0 Preparing Pallets
* * * * *
8.5 General Preparation
8.5.1 Presort
[Revise the fifth sentence of 8.5.1 as follows:]
* * * Except as described in 15.1i, bundles must not be placed on
mixed ADC or mixed NDC pallets. * * *
* * * * *
[Renumber current 15.0 through 23.0 as new 16.0 through 24.0 and
add new 15.0 as follows:]
15.0 Combining Standard Mail Flats and Periodicals Flats
15.1 Basic Standards
Authorized mailers may combine Standard Mail flats and Periodicals
flats in a single mailing as follows:
a. Each mailpiece must meet the standards in 340 for Standard Mail
and 707 for Periodicals. Periodicals publications must be authorized or
pending original or additional entry at the office of mailing.
b. Mailers must prepare pieces in bundles on pallets.
c. Except for residual volume placed on a mixed NDC pallet under
15.4.1j, all pallets meeting minimum volume requirements must be
dropshipped to the appropriate DNDC or DSCF.
d. Unless authorized by the local processing and distribution
manager, any mixed NDC pallets prepared under this program must be
entered at the NDC servicing the 3-digit ZIP Code of the entry Post
Office for the mailer's plant.
e. All pieces included in a combined mailing of Standard Mail and
Periodicals must meet the requirements for full-service automation, as
described in 23.0.
f. Mailers must pay all annual mailing fees at the office of
mailing.
g. Each mailing must include at least 200 pieces or 50 pounds of
Standard Mail.
h. All mailpieces combined within bundles, in accordance with 14.0,
must be similar in size so as to create stable bundles. Bundles placed
on pallets under this provision must be prepared to create stable
pallets.
i. When residual pieces are included in a combined mailing of
Standard Mail flats and Periodicals flats on pallets, these pieces must
be placed on mixed NDC pallets and entered at the NDC serving the
mailer's plant.
j. All mailpieces included in a combined mailing of Standard Mail
flats and Periodicals flats on pallets must be machinable in accordance
with 301.3.0.
15.1.1 Service Objectives
The Postal Service handles combined mailings of Standard Mail flats
and Periodicals flats as Standard Mail. Periodicals flats included
within mailings of combined Standard Mail flats and Periodicals flats
are subject to the USPS service standards applicable to Standard Mail.
15.1.2 Postage Payment
Postage for all Standard Mail pieces must be paid with permit
imprint using a special postage payment system in 2.0 through 4.0 at
the Post Office serving the mailer's plant. Postage for Periodicals may
be paid through an advance deposit account or through a Centralized
Account Payment System (CAPS) account.
15.1.3 Documentation
Mailers must present standardized electronic documentation
according to 708.1.0. This documentation must accurately reflect the
final piece count in the combined mailing. In addition, mailers must
provide:
a. An edition or version summary for all pieces in the mailing. The
summary may be part of the USPS qualification report and must include
version ID, product or edition code, class of mail, piece weight of
each version, and number of pieces by version; and for Periodicals,
USPS or permit number (or pending permit number), issue date, and
advertising percentage.
b. A consolidated postage statement register and postage statement
for each Periodicals publication in the combined mailing.
c. A consolidated postage statement register and postage statement
for each Standard Mail mailing in the combined mailing. Mailers may
provide a single consolidated postage statement and a consolidated
postage statement register of all Standard Mail mailings if they are
itemized.
d. A register of Forms 8125 (or PS 8125C) that consolidates all of
the mailings into the destinations where the mail is dropshipped.
e. Documentation to support zones and bundle totals, if requested.
f. When requested, a copy of a notification document signed and
dated by the Periodicals publisher, acknowledging their participation
in a combined mailing of Standard Mail and Periodicals and the
potential for their mailpieces to receive deferred USPS handling.
g. Any additional documentation to support postage payment system
records, if requested.
15.1.4 Authorization
A mailer must submit a written request to the manager, Business
Mailer Support (see 608.8.1 for address) to combine mailings of
Standard Mail flats and Periodicals flats. The request must show the
mailer's name and address, the mailing office, evidence of
authorization to mail using a special postage payment system under 2.0
through 4.0, procedures for combining the mailing, the expected date of
first mailing, quality control procedures, and a sample of all
supporting mailing documentation, including postage statements and the
USPS Qualification
[[Page 16591]]
Report. Business Mailer Support will review the documentation and
provide written authorization. A mailer may terminate an authorization
at any time by written notice to the postmaster of the office serving
the mailer's location. Business Mailer Support may terminate an
authorization by written notice if the mailer does not meet the
standards.
15.1.5 Price Eligibility
Apply prices based on the standards in 340 for Standard Mail.
Prices are based on the standards in 707 for Periodicals and as
modified under the standards for this program.
15.1.6 Piece Prices
Apply piece prices based on the bundle level. Pieces contained
within mixed class bundles may claim prices based on the presort level
of the bundle.
15.1.7 Applying the Periodicals Bundle Charge
Apply bundle charges as follows:
a. Calculate the percentage of Periodicals copies in a bundle.
b. Convert the percentage to four decimal places, rounding off if
necessary (for example, convert 20.221% to 0.2022, or 20.226% to
0.2023). Multiply by the applicable bundle charge.
c. Allocate the resulting charge across the Periodicals titles and
editions based on the number of copies of each in the bundle.
15.1.8 Applying the Periodicals Container Charge
Apply container charges to pallets as follows:
a. Calculate the percentage of the weight of Periodicals copies on
each pallet.
b. Convert the percentage to four decimal places, rounding off if
necessary (for example, convert 20.221% to 0.2022, or 20.226% to
0.2023). Multiply by the applicable container charge.
c. Allocate the resulting charge across the Periodicals titles and
editions based on the number of copies of each on the pallet.
15.1.9 Other Periodicals Pricing
Other prices for Periodicals flats in a combined mailing of
Standard Mail and Periodicals flats on pallets will be assessed as
follows:
a. The bundle prices applicable to the ADC container level will be
applied to the ASF/NDC container levels.
b. The container prices applicable to the ADC pallet level will
apply to the ASF/NDC pallet levels.
15.1.10 Bundle Reallocation To Protect the SCF or NDC Pallet
Mailers may reallocate bundles under 8.11 or 8.13 to protect the
SCF or NDC pallet.
15.2 Combining Standard Mail Flats and Periodicals Flats in the Same
Bundle
15.2.1 Bundling and Labeling
Standard Mail flats and Periodicals flats may be combined in
carrier route, 5-digit (scheme), 3-digit, ADC, and Mixed ADC bundles
when prepared according to 707.19.0 and these additional standards:
a. Each bundle containing combined Standard Mail flats and
Periodicals flats must contain a minimum of 10 pieces. Bundles of only
Standard Mail flats must contain a minimum of 10 pieces. Bundles of
only Periodicals flats must contain a minimum of 6 pieces.
b. Firm bundles must contain only Periodicals flats.
15.2.2 Mailpiece and Bundle Identification
Each Standard Mail and Periodicals mailpiece prepared under a
combined mailing of Standard Mail flats and Periodicals flats must be
identified as being part of a mixed class mailing through the use of an
optional endorsement line (OEL) in accordance with the standards in
708.7.1.8.
15.2.3 Pallet Presort and Labeling
Mailers must prepare pallets according to the standards in 8.0 and
in the sequence listed below. Merged 5-digit scheme through NDC pallets
must contain at least 250 pounds of combined Standard Mail and
Periodicals mailpieces, except as allowed under 8.5.3. Pallets must be
labeled according to the Line 1 and Line 2 information listed below and
under 8.6. Pallet placards must be white and measure at least 8 inches
by 11 inches, unless prepared under 708.6.6.6. Prepare pallets
according to the preparation, sequence and labeling instructions in
14.4.1.
15.3 Combining Bundles of Standard Mail Flats and Periodicals Flats on
the Same Pallet
15.3.1 Bundling and Labeling
Mailers must prepare bundles according to the standards for the
class of mail and the prices claimed.
15.3.2 Mailpiece and Bundle Identification
Each Standard Mail and Periodicals mailpiece prepared under a
combined mailing of Standard Mail flats and Periodicals flats must be
identified as being part of a mixed class mailing through the use of an
optional endorsement line (OEL) in accordance with standards in
708.7.1.8.
15.3.3 Pallet Presort and Labeling
Mailers must prepare pallets according to the standards in 8.0 and
in the sequence listed below. Merged 5-digit scheme through NDC pallets
must contain at least 250 pounds of combined Standard Mail and
Periodicals, except as allowed under 8.5.3. When reallocating bundles
under 8.11 or 8.12, mailers do not have to achieve the finest pallet
presort level possible. Pallets must be labeled according to the Line 1
and Line 2 information listed below and under 8.6. Pallet placards must
be white and measure at least 8 inches by 11 inches, unless prepared
under 708.6.6.6. Prepare pallets according to the preparation, sequence
and labeling instructions in 14.4.1.
15.4 Pallet Preparation
15.4.1 Pallet Preparation, Sequence and Labeling
When combining Standard Mail and Periodicals flats within the same
bundle or combining bundles of Standard Mail flats and bundles of
Periodicals flats on pallets, bundles must be placed on pallets.
Preparation, sequence and labeling:
a. Merged 5-digit scheme, optional. Not permitted for bundles
containing noncarrier route automation-compatible flats under 301.3.0.
Required for all other bundles. Pallet must contain barcoded carrier
route bundles and barcoded noncarrier route 5-digit bundles for the
same 5-digit scheme under L001. For 5-digit destinations not part of
L001, merged 5-digit pallet preparation begins with 8.10.2d. Labeling:
1. Line 1: L001.
2. Line 2: ``STD/PER FLTS CR/5D;'' followed by ``SCHEME'' (or
``SCH''); followed by ``MIX COMAIL.''
b. 5-digit scheme carrier routes, required. Pallet must contain
only carrier route bundles for the same 5-digit scheme under L001. For
5-digit destinations not part of L001, 5-digit carrier routes pallet
preparation begins with 2.2e. Labeling:
1. Line 1: L001.
2. Line 2: ``STD/PER FLTS''; followed by ``CARRIER ROUTES'' (or
``CR-RTS''); followed by ``SCHEME'' (or ``SCH''); followed by ``MIX
COMAIL.''
c. 5-digit carrier routes, required. Pallet must contain only
carrier route mail for the same 5-digit ZIP Code. Labeling:
[[Page 16592]]
1. Line 1: city, State, and 5-digit ZIP Code destination (see
8.6.4c for overseas military mail).
2. Line 2: ``STD/PER FLTS''; followed by ``CR/5D''; followed by
``MIX COMAIL.''
d. Merged 5-digit, optional. Not permitted for bundles containing
noncarrier route automation-compatible flats under 301.3.0. Required
for all other bundles. Pallet must contain barcoded carrier route
bundles and barcoded noncarrier route 5-digit bundles for the same 5-
digit ZIP Code. Labeling:
1. Line 1: city, State, and 5-digit ZIP Code destination (see
8.6.4c for overseas military mail).
2. Line 2: ``STD/PER FLTS''; followed by ``CR/5D''; followed by
``MIX COMAIL.''
e. 5-digit, required. Pallet must contain only mail for the same 5-
digit ZIP Code or same 5-digit scheme under L007 (for automation flats
only under 301.3.0). 5-digit scheme bundles are assigned to 5-digit
pallets according to the OEL ``label to'' 5-digit ZIP Code. Labeling:
1. Line 1: city, State, and 5-digit ZIP Code destination (see
8.6.4c for overseas military mail).
2. Line 2: ``STD/PER FLTS 5D''; followed by ``BARCODED'' (or
``BC''); followed by ``MIX COMAIL.''
f. 3-digit, optional, but not available for bundles for 3-digit ZIP
Code prefixes marked ``N'' in L002. Pallet may contain mail for the
same 3-digit ZIP Code or the same 3-digit scheme under L008 (for
automation-compatible flats only under 301.3.0). Three-digit scheme
bundles are assigned to pallets according to the OEL ``label to'' 3-
digit ZIP Code in L008. Labeling:
1. Line 1: L002, Column A.
2. Line 2: ``STD/PER FLTS 3D''; followed by ``BARCODED'' (or
``BC''); followed by ``MIX COMAIL.''
g. SCF, required. Pallet may contain carrier route or automation
mail for the 3-digit ZIP Code groups in L005. Labeling:
1. Line 1: L002, Column C.
2. Line 2: ``STD/PER FLTS SCF''; followed by ``BARCODED'' (or
``BC''); followed by ``MIX COMAIL.''
h. ASF, required unless bundle reallocation used under 2.3. Pallet
may contain carrier route or automation mail for the 3-digit ZIP Code
groups in L602. ADC bundles are assigned to pallets according to the
``label to'' ZIP Code in L004 as appropriate. Labeling:
1. Line 1: L602.
2. Line 2: ``STD/PER FLTS NDC''; followed by ``BARCODED'' (or
``BC''); followed by ``MIX COMAIL.''
i. NDC, required. Pallet may contain carrier route or automation
mail for the 3-digit ZIP Code groups in L601. ADC bundles are assigned
to pallets according to the ``label to'' ZIP Code in L004 as
appropriate. Labeling:
1. Line 1: L601.
2. Line 2: ``STD/PER FLTS NDC''; followed by ``BARCODED'' (or
``BC''); followed by ``MIX COMAIL.''
j. Mixed NDC, required, no minimum. Pallet may contain carrier
route or automation mail. Pallet includes MXD ADC bundles, prepared
according to the ``label to'' ZIP in L009, as appropriate. Unless
authorized by the processing and distribution manager, pallet must be
entered at the NDC serving the 3-digit ZIP Code of the entry Post
Office. Labeling:
1. Line 1: ``MXD'' followed by the information in L601, for the NDC
serving the 3-digit ZIP Code prefix of the entry Post Office.
2. Line 2: ``STD/PER FLTS;'' followed by ``BARCODED'' (or ``BC'');
followed by ``WKG;'' followed by ``MIX COMAIL.''
* * * * *
708 Technical Specifications
* * * * *
7.0 Optional Endorsement Lines (OELs)
7.1 OEL Use
7.1.1 Basic Standards
* * * * *
Exhibit 7.1.1 OEL Formats
-----------------------------------------------------------------------
Sortation Level OEL Example
-----------------------------------------------------------------------
* * * * *
[Revise Exhibit 7.1.1 to add a new last section to describe
additional OEL human-readable text for use with combined mailings of
Standard Mail and Periodicals flats as follows:]
Additional required human-readable text for use with combined
mailings of Standard Mail and Periodicals flats:
5-Digit Scheme (and other sortation * * * * * * * * SCH 5-DIGIT
levels as appropriate). 12345 MIX COMAIL
* * * * *
[Add a new 7.1.8 to described new OEL requirements for mailers
combining Standard Mail and Periodicals flats as follows:]
7.1.8 Required OEL Use in Combined Mailings of Standard Mail and
Periodicals Flats
Mailers authorized to combine Standard Mail flats and Periodicals
flats, under 705.15, must apply an OEL identifying the presort level of
the bundle and other applicable information to each mailpiece as
specified in 7.1 and the following additional standards:
a. Each OEL must contain the format elements described in 7.2 and
must include a ``MIX COMAIL'' human-readable text, as its most right-
justified element.
b. Mailpieces may include LOT information, in accordance with
7.1.7, only when there is sufficient space for the human-readable text
in item a and all other required information.
* * * * *
PART 121--[AMENDED]
3. The authority citation for 39 CFR Part 121 continues to read as
follows:
Authority: 5 U.S.C. 552(a); 39 U.S.C. 101, 401, 403, 404, 1001,
3691.
4. Amend Sec. 121.2 to include a new paragraph (c) to read as
follows:
Sec. 121.2 Periodicals
* * * * *
c. Combined Periodicals/Standard Mail mailing. The Postal Service
handles combined mailings of Periodicals flats and Standard Mail flats
as Standard Mail. Periodicals flats included within mailings of
combined Standard Mail flats and Periodicals flats are subject to the
service standards applicable to Standard Mail in section 121.3.
* * * * *
We will publish an appropriate amendment to 39 CFR part 111 and 121
to reflect these changes if our proposal is adopted.
Stanley F. Mires,
Chief Counsel, Legislative.
[FR Doc. 2011-6912 Filed 3-23-11; 8:45 am]
BILLING CODE 7710-12-P