[Federal Register Volume 76, Number 118 (Monday, June 20, 2011)]
[Notices]
[Pages 35886-35891]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-15251]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2011-0505; FRL-8877-3]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Chemical
Substances Inventory (TSCA Inventory)) to notify EPA and comply with
the statutory provisions pertaining to the manufacture of new
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to
publish in the Federal Register a notice of receipt of a premanufacture
notice (PMN) or an
[[Page 35887]]
application for a test marketing exemption (TME), and to publish in the
Federal Register periodic status reports on the new chemicals under
review and the receipt of notices of commencement (NOC) to manufacture
those chemicals. This document, which covers the period from April 25,
2011 to May 20, 2011, and provides the required notice and status
report, consists of the PMNs and TMEs, both pending or expired, and the
NOC to manufacture a new chemical that the Agency has received under
TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 20, 2011.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2011-0505, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the DCO's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: EPA's policy is that all comments received will be
included in the docket without change and may be made available on-line
at http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index
available at http://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at http://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
legal holidays. The telephone number of the EPA/DC Public Reading Room
is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division (7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; fax number: (202) 564-8955; e-mail address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
If you have any questions regarding the applicability of this action to
a particular entity, consult the person listed under FOR FURTHER
INFORMATION CONTACT.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR Part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
[[Page 35888]]
II. Why is EPA taking this action?
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA section
5(a), for ``test marketing'' purposes, which is referred to as a test
marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals. This status report, which covers the
period from April 25, 2011 to May 20, 2011, consists of the PMNs and
TMEs, both pending or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. Receipt and Status Reports
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.
Table I--49 PMNs Received From April 25, 2011 to May 20, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received notice end Manufacturer/ importer Use Chemical
date date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-11-0341........................... 4/25/2011 7/23/2011 CBI.................... (S) One resin component for (G) Resin polyester.
2k automotive coatings.
P-11-0342........................... 4/25/2011 7/23/2011 CBI.................... (G) Ink, coating, adhesive. (G) Polyacrylate oligomer.
P-11-0343........................... 4/25/2011 7/23/2011 CBI.................... (G) Base oil for lubricant. (G) Fatty acid esters.
P-11-0344........................... 4/25/2011 7/23/2011 CBI.................... (G) PMN substance is an (G) Polyaromatic heterocycle
intermediate used to make precursor.
various ligands for organo-
metallic catalysts and
potentially other
substances.
P-11-0345........................... 4/25/2011 7/23/2011 CBI.................... (G) An organic chemical (G) Heterocyclic organic
intermediate for use to intermediate.
make various other
chemicals for the
synthesis of organo-
metallic catalysts and
potentially other
materials.
P-11-0346........................... 4/25/2011 7/23/2011 CBI.................... (G) Intermediate precursor (G) Halogenated aromatic
to organometallic catalyst heterocyclic intermediate.
synthesis.
P-11-0347........................... 4/27/2011 7/25/2011 Henkel Corporation..... (G) Adhesive............... (S) N,N-dimethyl-p-toluidine-n-
oxide or benzeneamine, N,N, 4-
trimethyl, n-oxide.
P-11-0348........................... 4/22/2011 7/20/2011 CBI.................... (G) Battery component (G) Sodium melt electrolyte.
manufacturing.
P-11-0349........................... 4/27/2011 7/25/2011 Nanotech Industries, (S) Flooring; paints; top (S) Carbamic acid, N,N'-
Inc.. coating. (trymethyl-1,6hehanedyl)bis-
,ester with 1,2-propanediol
(1:2).
P-11-0350........................... 4/28/2011 7/26/2011 CBI.................... (G) Epoxy curative......... (S) Phenol, 4,4'-sulfonylbis-,
bis(mixed acetates and
propionates).
P-11-0351........................... 4/28/2011 7/26/2011 CBI.................... (G) Ink binder............. (G) Polyurethane.
P-11-0352........................... 4/28/2011 7/26/2011 Sasol North America.... (S) Anti-graying agent in (S) 1,4-benzenedicarboxylic
fabric washes. acid, 1,4-dimethyl ester,
polymer with 1,2-ethanediol and
1,2,3-propanetriol, ester with
methyl--hydroxypoly(oxy-1,2-
ethandiyl).
P-11-0353........................... 4/28/2011 7/27/2011 Sasol North America.... (S) Anti-graying agent in (S) 1,4-benzenedicarboxylic
fabric washes. acid, 1,4-dimethyl ester,
polymer with 1,2-propanediol,
ester with -methyl--
hydroxypoly(oxy-1,2-
ethanediyl).
P-11-0354........................... 4/29/2011 7/27/2011 CBI.................... (G) Coating................ (G) Polycarbonate type urethane
resin.
P-11-0355........................... 5/3/2011 7/31/2011 Hybrid Plastics, Inc... (G) Thermoplastics and (S)
coatings additive; Tricyclo[7.3.3.15,11]heptasilox
elastomer additive. ane-3,7,14-
triol,1,3,5,7,9,11,14-
heptaisooctyl-, stereoisomer.
P-11-0356........................... 5/2/2011 7/30/2011 3M Company............. (S) Prepolymer for (G) Alkoxysilyl polyether
sprayable adhesive/ prepolymer.
sealant; prepolymer for
high viscosity adhesive/
sealant.
P-11-0357........................... 5/4/2011 8/1/2011 CBI.................... (G) Coating................ (G) Polycarbonate type urethane
resin.
P-11-0358........................... 5/4/2011 8/1/2011 CBI.................... (G) Polyurethane surfactant (G) Trisiloxane copolymer.
[[Page 35889]]
P-11-0359........................... 5/6/2011 8/3/2011 Cytec Industries Inc... (S) Binder for printing (G) Fatty acids polymers with
inks. alkanoic acid, substituted
alkyl diol and substituted
carbomoncycle.
P-11-0360........................... 5/4/2011 8/1/2011 CBI.................... (S) As a surface active (G) Quaternized
agent in the preparation polyvinylimidazole.
of printed circuit boards;
as a brightener for the
electroplating industry.
P-11-0361........................... 5/4/2011 8/1/2011 CBI.................... (S) As a surface active (G) Quaternized
agent in the preparation polyvinylimidazole.
of printed circuit boards;
as a brightener for the
electroplating industry.
P-11-0362........................... 5/10/2011 8/7/2011 CBI.................... (G) Flame retardant........ (G) Phosphonium-substituted
heteroaromatic sulfate salt.
P-11-0363........................... 5/9/2011 8/6/2011 CBI.................... (G) Specialty additive..... (G) Sodiium humate, polymer with
acrylic monomers.
P-11-0364........................... 5/12/2011 8/9/2011 CBI.................... (G) Prepolymer for casting (G) Alkanediol, polymer with
transparencies. 1,1'-methylenebis[4-
isocyanatocyclohexane].
P-11-0365........................... 5/12/2011 8/9/2011 CBI.................... (G) Dispersant............. (G) Tall oil acids, reaction
products with dialkyleneamine
and acid anhydride, compounds
with polyalkylene glycol
hydrogen maleate alkyl ethers.
P-11-0366........................... 5/12/2011 8/9/2011 CBI.................... (G) Raw material for the (G) 1-propanone, 2-hydroxy-2-
manufacturing of release methyl-, 1-(4-alkylaryl)
coatings. derivates.
P-11-0367........................... 5/11/2011 8/8/2011 CBI.................... (G) Resin is used for (G) Elastomer polyurethane.
production of synthetic
leather.
P-11-0368........................... 5/11/2011 8/8/2011 CBI.................... (G) Lamination adhesive.... (G) IPDI modified polyester
resin.
P-11-0369........................... 5/12/2011 8/9/2011 Matteson-Ridolfi (G) Polymeric flow and foam (G) Alkyl polyester--acrylic
Incorporated. control additive for copolymer.
industrial coatings.
P-11-0370........................... 5/12/2011 8/9/2011 Matteson-Ridolfi (G) Polymeric flow and foam (G) Alkyl polyester--acrylic
Incorporated. control additive for copolymer.
industrial coatings.
P-11-0371........................... 5/13/2011 8/10/2011 CBI.................... (G) Binder................. (G) Polyurethane.
P-11-0372........................... 5/13/2011 8/10/2011 CBI.................... (G) Adhesives for open non- (G) Polyesterurethane.
descriptive use.
P-11-0373........................... 5/17/2011 8/14/2011 CBI.................... (G) Coating component...... (G) 1,1'-
methylenebis[isocyanatobenzene]
, polymer with polyester
polyols and polypropylene
glycol.
P-11-0374........................... 5/17/2011 8/14/2011 CBI.................... (G) Polymerization process (G) Alcanoic acid, 2, 2'-
additive destructive use. [carbonothioylbis(thio)]bis-,
disodium salt.
P-11-0375........................... 5/18/2011 8/15/2011 CBI.................... (S) Laminate adhesive...... (G) Solvent free aromatic
adhesive.
P-11-0376........................... 5/18/2011 8/15/2011 CBI.................... (G) An open non-dispersive (G) Aliphatic alcohol type
use in ink. polyester.
P-11-0377........................... 5/16/2011 8/13/2011 CBI.................... (G) Lubricants............. (G) Highly branched
isoparaffinic hydrocarbons.
P-11-0378........................... 5/18/2011 8/15/2011 CBI.................... (S) As a surface active (G) Quaternized
agent in the preparation polyvinylimidazole.
of printed; as a
brightener for the
electroplating industry.
P-11-0379........................... 5/18/2011 8/15/2011 CBI.................... (S) As a surface active (G) Quaternized
agent in the preparation polyvinylimidazole.
of printed; as a
brightener for the
electroplating industry.
P-11-0380........................... 5/18/2011 8/15/2011 CBI.................... (G) Contained use in energy (G) Tertiary amine salt.
production.
P-11-0381........................... 5/18/2011 8/15/2011 CBI.................... (G) Contained use in energy (G) Tertiary amine salt.
production.
P-11-0382........................... 5/18/2011 8/15/2011 CBI.................... (G) Contained use in energy (G) Tertiary amine salt.
production.
P-11-0383........................... 5/18/2011 8/15/2011 CBI.................... (G) Lubricant additive..... (G) Calcium alkyl salicylate.
P-11-0384........................... 5/18/2011 8/15/2011 3M Company............. (G) Protective treatment... (G) Fluorinated
alkylsulfonamidol urethane
polymer.
P-11-0385........................... 5/19/2011 8/16/2011 CBI.................... (G) Pigment formulation (G) Oxirane, 2-alkyl, polymer
additive. with oxirane, mono(dihydrogen
phosphate), nutshell liquid
ethers, dipotassium salts.
[[Page 35890]]
P-11-0386........................... 5/20/2011 8/17/2011 Emery Oleochemicals LLC (S) Wetting agent.......... (S) Nonanoic acid, ammonium
salt.
P-11-0387........................... 5/19/2011 8/16/2011 CBI.................... (G) Prepolymers for (G) Polycarbonate TDI
manufacturing polyurethane prepolymer.
rubber elastomer for
tires, wheels, rolls,
screens, belts and other
specialty urethane
articles.
P-11-0388........................... 5/18/2011 8/15/2011 CBI.................... (G) Contained use in energy (G) Tertiary amine salt.
production.
P-11-0389........................... 5/18/2011 8/15/2011 CBI.................... (G) Contained use in energy (G) Tertiary amine salt.
production..
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit EPA provides the following information (to
the extent that such information is not claimed as CBI) on the TMEs
received by EPA during this period: The EPA case number assigned to the
TME, the date the TME was received by EPA, the projected end date for
EPA's review of the TME, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the TME, and
the chemical identity.
Table II--1 TME Received From April 25, 2011 to May 20, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received review end Manufacturer/importer Use Chemical
date date
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-11-0009............................ 5/6/2011 6/19/2011 Cytec Industries Inc.... (S) Binder for printing inks. (G) Fatty acids polymers
with alkanoic acid,
substituted alkyl diol and
substituted carbomoncycle.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.
Table III--41 NOCs Received From April 25, 2011 to May 20, 2011
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received notice end Chemical
date date
----------------------------------------------------------------------------------------------------------------
P-06-0332.................................... 5/13/2011 5/5/2011 (G) Phosphine oxide.
P-06-0380.................................... 5/5/2011 4/13/2011 (G) Alkyl substituted carbobicycle
acid anhydride.
P-07-0471.................................... 5/10/2011 4/25/2011 (G) Carbomonocyclic dicarboxylic acid
polymer containing trimethyl
substituted alkane diol and 1,6-
hexanediol.
P-08-0274.................................... 5/3/2011 4/12/2011 (G) Alkanedioic acid, polymer with
alkanediol, alkanediamine,
alkanediol, hydroxy-(hydroxyalkyl)-
alkyl-, trialkylamine, carbocycle-
isocyanato-(isocyanatoalkyl)-
trialkyl-, trialkylcyclohexane and
alkylimino alcohol, salt.
P-09-0486.................................... 5/5/2011 5/2/2011 (G) Polyalkenyl, N,N'-bistriazole.
P-09-0546.................................... 4/27/2011 4/15/2011 (G) Formaldehyde reaction products
with aromatic amine.
P-09-0552.................................... 5/17/2011 5/6/2011 (S) Benzene, 1,3-bis(1-chloro-1-
methylethyl).
P-09-0642.................................... 4/27/2011 4/20/2011 (G) Acrylate.
P-09-0644.................................... 5/18/2011 5/16/2011 (G) Substituted alkyl phosphate
ester.
P-09-0646.................................... 4/29/2011 4/7/2011 (G) Aromatic dicarboxylic acid,
polymer with aliphatic diols and
aliphatic dicarboxylic acid.
P-10-0072.................................... 5/20/2011 4/8/2011 (G) Substituted oxidized piperidinyl
derivative.
P-10-0247.................................... 5/2/2011 2/28/2011 (G) Benzyl isononyl cyclohexane-1,2-
dicarboxylate (provisional).
P-10-0266.................................... 5/3/2011 4/6/2011 (G) Propanoic acid, alkylthio, (1,1-
dimethylethyl)--[[alkyl-4-hydroxy-2-
alkylphenyl]thio]alkylphenyl ester.
P-10-0333.................................... 4/27/2011 4/1/2011 (G) 1,4:3,6-dianhydrohexitol-,
reaction products with chloro-
oxopropoxy-benzoic acid and hydroxy-
methoxybenzoic acid.
P-10-0334.................................... 4/27/2011 4/1/2011 (G) Benzoic acid, (acryloxy)alkoxy-,
1,1'-(methylphenylene) ester.
P-10-0379.................................... 4/29/2011 4/20/2011 (G) Vegetable oil, ester, polymd.,
oxidized.
P-10-0422.................................... 4/25/2011 4/12/2011 (S) Propane, 1,1,1,2,3,-pentafluoro-
*.
P-10-0440.................................... 5/17/2011 4/28/2011 (G) Polyester.
P-10-0476.................................... 5/6/2011 4/28/2011 (G) Brominated styrene butadiene
polymer.
P-10-0505.................................... 4/27/2011 4/14/2011 (G) Alkoxylated alkyl alcohol, ester
with alknoenedioic acid, alkali
metal salt.
[[Page 35891]]
P-10-0515.................................... 5/11/2011 3/18/2011 (S) 2-propenoic acid, 2-methyl-,
methyl ester, polymer with butyl 2-
propenoate and N-(1,1-dimethyl-3-
oxobutyl)-2-propenamide*.
P-10-0550.................................... 4/29/2011 4/8/2011 (G) Vegetable oil, modified products,
esters.
P-10-0551.................................... 4/29/2011 4/11/2011 (G) Olefins.
P-10-0552.................................... 4/29/2011 4/11/2011 (G) Olefins.
P-10-0553.................................... 4/29/2011 4/11/2011 (G) Olefins.
P-10-0554.................................... 5/16/2011 5/13/2011 (G) Esters.
P-10-0555.................................... 5/16/2011 5/13/2011 (G) Esters.
P-10-0563.................................... 4/27/2011 4/22/2011 (G) Cycloalkylamine.
P-10-0564.................................... 4/25/2011 4/16/2011 (G) Maleated fatty oil, substituted
alkanoic acid ester, ester with
polyethylene glycol, compounds with
alkyl alkanol amine.
P-11-0055.................................... 5/11/2011 4/27/2011 (G) Polyester urethane polymer.
P-11-0109.................................... 4/25/2011 4/22/2011 (G) Substituted alkyl homopolymer,
substituted alkylacrylate and
heteromonocyclic homopolymer
monoester with substituted
alkylacrylate.
P-11-0116.................................... 5/18/2011 4/27/2011 (G) Carboxylic acid, alkanoate
polymer with ethenylbenzene and 2-
propenoic acid, di-me 2,2'-(1,2-
diazenediyl)bis[2-methylpropanoate]-
initiatied, compds. with 2-
(dimethylamino)ethanol.
P-11-0117.................................... 4/29/2011 4/8/2011 (G) Polyamine-polymer graft polymer.
P-11-0131.................................... 5/3/2011 4/11/2011 (G) Isocyanate-terminated prepolymer.
P-11-0136.................................... 5/9/2011 3/30/2011 (G) Polyether polyester polyurethane
adhesive.
P-11-0145.................................... 4/25/2011 4/16/2011 (G) Acrylic polymer.
P-11-0149.................................... 5/11/2011 4/23/2011 (G) Isocyanate function polyester
urethane polymer.
P-11-0152.................................... 4/29/2011 4/21/2011 (G) Polyester type polyurethane
resin.
P-11-0164.................................... 5/9/2011 5/5/2011 (G) 2-propenoic acid, 2-methyl-,
aminoalkyl ester, polymer with et
acrylate, 2-hydroxyethyl
methacrylate, polyethylene glycol
methacrylate alkyl ether and
polyethylene-polypropylene glycol
alkyl ether.
P-11-0166.................................... 4/27/2011 4/26/2011 (G) Fatty acids, esters with
polyalkylene glycol mono alkyl
ether.
P-11-0173.................................... 5/19/2011 5/17/2011 (G) Polyurethane dispersion in water.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit II. to access
additional non-CBI information that may be available.
List of Subjects
Environmental protection, Chemicals, Hazardous substances, Imports,
Notice of commencement, Premanufacturer, Reporting and recordkeeping
requirements, Test marketing exemptions.
Dated: June 8, 2011.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2011-15251 Filed 6-17-11; 8:45 am]
BILLING CODE 6560-50-P