[Federal Register Volume 76, Number 225 (Tuesday, November 22, 2011)] [Notices] [Pages 72203-72204] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2011-30125] ----------------------------------------------------------------------- DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD12-5-000] Voltage Coordination on High Voltage Grids; Notice of Reliability Workshop Agenda As announced in the Notice of Staff Workshop issued on November 8, 2011, the Commission will hold a workshop on Thursday, December 1, 2011, from 9 a.m. to 4:30 p.m. to explore the interaction between voltage control, reliability, and economic dispatch. In addition, the Commission will consider how improvements to dispatch and voltage control software could improve reliability and market efficiency. This event will consist of two panels of industry participants. The first panel will address how entities currently coordinate economic dispatch and voltage control. The second panel will address the capability of existing and emerging software to improve coordination and optimization of the Bulk-Power System from a reliability and economic perspective. The agenda for this workshop is attached. Members of the Commission may attend the workshop. Commission conferences are accessible under section 508 of the Rehabilitation Act of 1973. For accessibility accommodations, please send an email to [email protected] or call toll free 1-(866) 208- 3372 (voice) or (202) 208-1659 (TTY), or send a FAX to (202) 208-2106 with the required accommodations. Information on this event will be posted on the Calendar of Events on the Commission's Web site, http://www.ferc.gov, prior to the event. For more information about this conference, please contact: Sarah McKinley, Office of External Affairs, Federal Energy Regulatory Commission, 888 First Street NE., Washington, DC 20426, (202) 502-8368, [email protected]. Dated: November 16, 2011. Kimberly D. Bose, Secretary. [GRAPHIC] [TIFF OMITTED] TN22NO11.003 Staff Workshop on Voltage Coordination on High Voltage Grids December 1, 2011 9 a.m.-4:30 p.m. Agenda 9-9:15 a.m.--Greeting and Opening Remarks by David Andrejcak. 9:15-11:30 a.m.--Current approaches and challenges to analyzing voltage support and reactive margin during operations planning and real-time. Presentations: Panelists will be asked to describe how their companies currently coordinate the dispatch of reactive resources to support forecasted loads, generation and interchange transactions during operations planning and real-time. Panelists should address the following in their presentations: a. Describe the pre-scheduling and real-time processes that involve the commitment or dispatch of reactive resources from a reliability perspective. What applications or tools are used to evaluate reactive or voltage support needs from this perspective? b. Describe the pre-scheduling and real-time processes that involve the commitment or dispatch of reactive resources from an economic perspective. What applications or tools are used to evaluate reactive or voltage support needs from this perspective? c. Explain whether and how pre-scheduling, real-time and post analysis evaluations are performed on the bulk electric system or on lower voltage systems to maximize opportunities for additional reliability or economic transactions. d. Describe the situations where the dispatch of reactive resources may limit System Operating Limits or whether and how more transactions could be supported. e. Describe how reactive power needs of the distribution system or loads are coordinated or optimized. Panelists:Khaled Abdul-Rahman, California Independent System Operator Xiaochuan Luo, ISO New England Wes Yeomans, New York Independent System Operator Dave Zwergel, Midwest ISO Chantal Hendrzak, PJM Interconnection Bruce Rew, Southwest Power Pool 11:30 a.m.-1 p.m.--Lunch Break. 1-4 p.m.--The next generation of voltage support and reactive margin applications used during operations planning and real-time. Presentations: Panelists will be asked to describe capabilities of the present and anticipated future software that can be used as decision tools to help system operators optimize voltage support resources to preserve and protect [[Page 72204]] reliability and support market-based economic transactions. Panelists should address the following in their presentations: a. What are the objectives of software products available to industry that optimize the system for operations planning and real- time? (Minimize losses, maximize transfer capability, and/or minimize production costs?) b. Describe the system optimization software products currently used or tested in industry. Discuss how widely these are used in industry. c. Describe how these software products are evaluated and validated using a post analysis process. d. What effort is involved in implementing the application for use in industry? e. Discuss whether the application can be used on an interconnection-wide, Balancing Authority or local distribution system basis and, if so, how the application would be utilized. f. Discuss whether the applications can be used to optimize reactive power resources in the distribution system or loads and coordinate with higher voltage systems. Panelists: Kedall Demaree, Alstom Rod Sulte, GE Soorya Kuloor, Gridiant Marija Ilic, New Electricity Transmission Software Solutions (NETSS) Dan French, Siemens 4:00-4:30 p.m.--Summary Remarks by David Andrejcak. [FR Doc. 2011-30125 Filed 11-21-11; 8:45 am] BILLING CODE 6717-01-P