[Federal Register Volume 77, Number 20 (Tuesday, January 31, 2012)]
[Notices]
[Pages 4800-4803]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-2045]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
Office of Energy Efficiency and Renewable Energy
[Case No. CR-002]
Notice of Petition for Waiver of Hussmann From the Department of
Energy Commercial Refrigerator, Freezer and Refrigerator-Freezer Test
Procedure, and Grant of Interim Waiver
AGENCY: Office of Energy Efficiency and Renewable Energy, U.S.
Department of Energy.
ACTION: Notice of petition for waiver, notice of grant of interim
waiver, and request for comments.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt of and publishes the Hussmann
Inc. (Hussmann) petition for waiver and application for interim waiver
(hereafter, ``petition'') from the U.S. Department of Energy (DOE) test
procedure for determining the energy consumption of commercial
refrigerators, freezers and refrigerator-freezers. Today's notice also
grants an interim waiver of the commercial refrigerator, freezer and
refrigerator-freezer test procedure. Through this notice, DOE also
solicits comments with respect to the Hussmann petition.
DATES: DOE will accept comments, data, and information with respect to
the Hussmann petition until March 1, 2012.
ADDRESSES: You may submit comments, identified by case number CR-002,
by any of the following methods:
Federal eRulemaking Portal: www.regulations.gov. Follow
the instructions for submitting comments.
E-mail: [email protected]. Include ``Case
No. CR-002'' in the subject line of the message.
Mail: Ms. Brenda Edwards, U.S. Department of Energy,
Building Technologies Program, Mailstop EE-2J/1000 Independence Avenue,
SW., Washington, DC 20585-0121. Telephone: (202) 586-2945. Please
submit one signed original paper copy.
Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department
of Energy, Building Technologies Program, 950 L'Enfant Plaza SW., Suite
600, Washington, DC 20024. Please submit one signed original paper
copy.
Docket: For access to the docket to review the background documents
relevant to this matter, you may visit the U.S. Department of Energy,
950 L'Enfant Plaza SW., Washington, DC, 20024; (202) 586-2945, between
9 a.m. and 4 p.m., Monday through Friday, except on Federal holidays.
Available documents include the following items: (1) This notice; (2)
public comments received; (3) the petition for waiver and application
for interim waiver; and (4) DOE rulemakings and waivers regarding
commercial refrigeration equipment. Please call Ms. Brenda Edwards at
the above telephone number for additional information.
FOR FURTHER INFORMATION CONTACT: Dr. Michael G. Raymond, U.S.
Department of Energy, Building Technologies Program, Mail Stop EE-2J,
Forrestal Building, 1000 Independence Avenue SW. Washington, DC 20585-
0121. Telephone: (202) 586-9611. E-mail: [email protected].
Ms. Elizabeth Kohl, U.S. Department of Energy, Office of the
General Counsel, Mail Stop GC-71, Forrestal Building, 1000 Independence
Avenue, SW., Washington, DC 20585-0103. Telephone: (202) 586-7796. E-
mail: [email protected].
SUPPLEMENTARY INFORMATION:
I. Background and Authority
Title III, Part B of the Energy Policy and Conservation Act of 1975
(EPCA), Public Law 94-163 (42 U.S.C. 6291-6309, as codified),
established the Energy Conservation Program for Consumer Products Other
Than Automobiles, a program covering most major household appliances.
Part B includes definitions, test procedures, labeling provisions,
energy conservation standards, and the authority to require information
and reports from manufacturers. Further, Part B authorizes the
Secretary of Energy to prescribe test procedures that are reasonably
designed to produce results
[[Page 4801]]
which measure energy efficiency, energy use, or estimated operating
costs, and that are not unduly burdensome to conduct. (42 U.S.C.
6293(b)(3)). Part C of Title III provides for a similar energy
efficiency program titled ``Certain Industrial Equipment,'' which
includes commercial refrigerators, freezers and refrigerator-freezers
and other types of commercial equipment.\1\ (42 U.S.C. 6311-6317)
---------------------------------------------------------------------------
\1\ For editorial reasons, upon codification in the U.S. Code,
Part C was re-designated Part A-1.
---------------------------------------------------------------------------
Section 343(a)(6)(C) of EPCA (42 U.S.C. 6314(a)(6)(C)) directs DOE
to develop test procedures to establish the appropriate rating
temperatures for products for which standards will be established under
section 342(c)(4), i.e., (1) ice-cream freezers; (2) commercial
refrigerators, freezers, and refrigerator-freezers with a self-
contained condensing unit without doors; and (3) commercial
refrigerators, freezers, and refrigerator-freezers with a remote
condensing unit. Other provisions of section 343(a)(6) provide DOE with
additional authority to establish and amend test procedures for
commercial refrigeration equipment. On December 8, 2006, DOE published
a final rule adopting test procedures for commercial refrigeration
equipment, effective January 8, 2007. 71 FR 71340. Title 10 of the Code
of Federal Regulations (10 CFR) 431.64 directs manufacturers of
commercial refrigerators, freezers and refrigerator-freezers to use
Air-Conditioning and Refrigeration Institute (ARI) Standard 1200-2006,
``Performance Rating of Commercial Refrigerated Display Merchandisers
and Storage Cabinets'' when measuring the energy consumption of those
products. DOE established energy conservation standards for certain
classes of commercial refrigerators effective January 1, 2012 (74 FR
1092, Jan. 9, 2009). The basic models included in Hussmann's petition
are subject to the applicable standards established in that rulemaking
and are therefore required to be tested and rated according to the
prescribed DOE test procedure, AHRI 1200-2006, as of January 1, 2012.
The regulations set forth in 10 CFR part 431.401 contain provisions
that enable a person to seek a waiver from the test procedure
requirements for covered products. The Assistant Secretary for Energy
Efficiency and Renewable Energy (the Assistant Secretary) will grant a
waiver if it is determined that the basic model for which the petition
for waiver was submitted contains one or more design characteristics
that prevents testing of the basic model according to the prescribed
test procedures, or if the prescribed test procedures may evaluate the
basic model in a manner so unrepresentative of its true energy
consumption characteristics as to provide materially inaccurate
comparative data. 10 CFR 431.401(f)(4). Petitioners must include in
their petition any alternate test procedures known to the petitioner to
evaluate the basic model in a manner representative of its energy
consumption. 10 CFR 430.401(b)(1)(iii). The Assistant Secretary may
grant the waiver subject to conditions, including adherence to
alternate test procedures. 10 CFR 431.401(f)(4). Waivers remain in
effect pursuant to the provisions of 10 CFR 430.401(g).
The waiver process also allows the Assistant Secretary to grant an
interim waiver from test procedure requirements to manufacturers that
have petitioned DOE for a waiver of such prescribed test procedures. 10
CFR 430.401(e)(3). An interim waiver remains in effect for 180 days or
until DOE issues its determination on the petition for waiver,
whichever is sooner. DOE may extend an interim waiver for an additional
180 days. 10 CFR 430.401(e)(4).
II. Application for Interim Waiver and Petition for Waiver
On December 7, 2011, Hussmann submitted a petition for waiver from
the DOE test procedure applicable to commercial refrigerators, freezers
and refrigerator-freezers set forth in 10 CFR 431.64. Hussmann
requested the waiver for its commercial refrigerators intended to hold
and display bulk produce (whole, uncut fresh fruits and/or vegetables).
These refrigerators are manufactured in both ``remote'' and ``self-
contained'' versions. These products are classified as commercial
refrigerators, freezers, and refrigerator-freezers with a self-
contained condensing unit and without doors (category viii of the
applicable test procedure requirement set forth in the table at 10 CFR
431.64(b)(2)) and commercial refrigerators, freezers, and refrigerator-
freezers with a remote condensing unit (category ix of the above
table). The applicable test procedure for these products is ARI 1200-
2006. Manufacturers are directed to use this test procedure pursuant to
10 CFR 431.64.
Hussmann seeks a waiver from the applicable test procedure under 10
CFR 431.64 on the grounds that its commercial refrigerators contain
design characteristics that prevent testing according to the current
DOE test procedure. Specifically, Hussmann asserts that the
refrigerators are not able to operate at the specified integrated
average temperature of 38 [deg]F. Consequently, Hussmann requested that
DOE grant a waiver from the applicable test procedure, allowing the
specified products to be tested at 49 [deg]F, which Hussmann asserts is
the lowest temperature at which the specified basic models can operate.
On December 7, 2011, Hussmann also submitted an application for an
interim waiver from the test procedures at 10 CFR 431.64 for its
commercial refrigerators. An interim waiver may be granted if it is
determined that the applicant will experience economic hardship if the
application for interim waiver is denied, if it appears likely that the
petition for waiver will be granted, and/or the Assistant Secretary
determines that it would be desirable for public policy reasons to
grant immediate relief pending a determination of the petition for
waiver. (10 CFR 430.401(e)(3)).
DOE has determined that Hussmann's application for interim waiver
does not provide sufficient market, equipment price, shipments, and
other manufacturer impact information to permit DOE to evaluate the
economic hardship Hussmann might experience absent a favorable
determination on its application for an interim waiver. DOE has
determined, however, that it is likely Hussmann's petition will be
granted, and that it is desirable for public policy reasons to grant
Hussmann relief pending a determination on the petition. DOE believes
that it is likely Hussmann's petition will be granted because the
refrigerators specified in Hussmann's petition are not able to operate
at the specified integrated average temperature of 38 [deg]F. In
addition, DOE has determined that it is desirable that the energy
efficiency of this equipment be able to be tested and rated in a manner
similar to other commercial refrigeration equipment while DOE considers
the petition for waiver. As a result, DOE grants an interim waiver to
Hussmann for the specified models of its commercial refrigerator
products. Therefore, it is ordered that:
The application for interim waiver filed by Hussmann is hereby
granted for Hussmann's specified models of commercial refrigerators,
subject to the specifications and conditions below.
Hussmann shall be required to test and rate the specified basic
models according to the alternate test procedure as set forth in
section III, ``Alternate test procedure.''
The interim waiver applies to the following basic model groups:
[[Page 4802]]
DBRP-03-4-R, DBRP-03-6-R, DBRP-03-8-R, DBRP-03-10-R, DBRP-03-12-R,
DBRP-03-14-R, DBRP-03-16-R, DBRP-03-18-R, DBRP-03-20-R, DBRP-03-22-R,
DBRP-03-24-R, DBRP-03-26-R, DBRP-03-28-R, DBRP-03-30-R, DBRP-03-32-R,
DBRP-03-34-R, DBRP-03-36-R
DSRP-03-5-R, DSRP-03-6-R, DSRP-03-8-R, DSRP-03-10-R, DSRP-03-12-R,
DSRP-03-14-R, DSRP-03-16-R, DSRP-03-18-R, DSRP-03-20-R, DSRP-03-22-R,
DSRP-03-24-R, DSRP-03-26-R, DSRP-03-28-R, DSRP-03-30-R, DSRP-03-32-R,
DSRP-03-34-R, DSRP-03-36-R
DSRPI-03-5-R, DSRPI-03-6-R, DSRPI-03-8-R, DSRPI-03-10-R, DSRPI-03-12-R,
DSRPI-03-14-R, DSRPI-03-16-R, DSRPI-03-18-R, DSRPI-03-20-R, DSRPI-03-
22-R, DSRPI-03-24-R, DSRPI-03-26-R, DSRPI-03-28-R, DSRPI-03-30-R,
DSRPI-03-32-R, DSRPI-03-34-R, DSRPI-03-36-R
DOE makes decisions on waivers and interim waivers for only those
models specifically set out in the petition, not future models that may
be manufactured by the petitioner. Hussmann may submit a petition for
waiver and request for grant of interim waiver, as appropriate, for
additional models of commercial refrigerators, freezers and
refrigerator-freezers for which it seeks a waiver from the DOE test
procedure. In addition, grant of an interim waiver or waiver does not
release a petitioner from the certification requirements set forth at
10 CFR part 429.
III. Alternate Test Procedure
As a condition for granting this interim waiver to Hussmann, DOE
requires Hussmann to test the commercial refrigerators specified in its
December 7, 2011 petition and listed above according to the specified
test procedure, Air-Conditioning and Refrigeration Institute (ARI)
Standard 1200-2006, ``Performance Rating of Commercial Refrigerated
Display Merchandisers and Storage Cabinets,'' except that instead of
testing at the required integrated average temperature of 38 2 [deg]F, Hussmann shall test the specified basic models at an
integrated average temperature of 49 2 [deg]F.
IV. Summary and Request for Comments
Through today's notice, DOE announces receipt of Hussmann's
petition for waiver from the test procedures that apply to commercial
refrigerators, freezers and refrigerator-freezers. For the reasons
articulated above, DOE also grants Hussmann an interim waiver from
those procedures. DOE is publishing Hussmann's petition for waiver in
its entirety pursuant to 10 CFR 430.401(b)(1)(iv). The petition
contains no confidential information. Furthermore, today's notice
includes an alternate test procedure that Hussmann is required to
follow as a condition of its interim waiver.
DOE solicits comments from interested parties on all aspects of the
petition. Pursuant to 10 CFR 431.401(d), any person submitting written
comments must also send a copy of such comments to the petitioner. The
contact information for the petitioner is: Ron Shebik, Compliance
Manager, Hussmann Corporation, 12999 St. Charles Rock Road, Bridgeton,
MO 63044. All submissions received must include the case number for
this proceeding, CR-002. Submit electronic comments in WordPerfect,
Microsoft Word, Portable Document Format (PDF), or text (American
Standard Code for Information Interchange (ASCII)) file format and
avoid the use of special characters or any form of encryption. Wherever
possible, include the electronic signature of the author. DOE does not
accept telefacsimiles (faxes). According to 10 CFR 1004.11, any person
submitting information that he or she believes to be confidential and
exempt by law from public disclosure should submit two copies: one copy
of the document including all the information believed to be
confidential, and one copy of the document with the information
believed to be confidential deleted. DOE will make its own
determination about the confidential status of the information and
treat it according to its determination.
Issued in Washington, DC, on January 25, 2012.
Kathleen B. Hogan,
Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and
Renewable Energy.
Petition for a Waiver
Request for a test procedure waiver from DOE pursuant to
provisions described in 10 CFR 431.401 for the following product on
the grounds of ``The prescribed test procedures may evaluate the
basic model in a manner so unrepresentative of its true energy
consumption characteristics as to provide materially inaccurate
comparative data''
The design characteristics constituting the grounds for the
Petition for the Waiver:
1.1 Commercial Refrigerators are intended to hold and display
bulk produce (whole, uncut fresh fruits and/or vegetables). These
refrigerators are manufactured in both ``Remote'' and ``Self-
Contained'' version.
1.2 These commercial refrigerators are typically designed to
hold the produce at an Average Integrated Temperature (AIT) of 41
[deg]F ~ 50 [deg]F range (The amount and method of merchandising the
food product varies which results in a wide range of AIT). Whole,
uncut fresh fruits/vegetables are not considered to be potentially
hazardous foods by the FDA and therefore do not require time/
temperature control for safety of the food.
1.3 DOE requires testing Medium Temperature commercial
refrigerators at an AIT of 38 [deg]F 2 [deg]F.
1.4 In order to reduce the AIT from 41 [deg]F ~ 50 [deg]F range
to an AIT of 38 [deg]F 2 [deg]F, manufacturers will
have to take the following steps:
a) Increase energy consumption to reduce the AIT;
b) Significantly change the design;
c) Use higher energy consuming components such as condensing
units or increase the number of energy consuming components such as
condensing units; and
d) Use evaporator coils that would consume higher amounts of
refrigerant and use higher capacity coil which will consume more
BTU's which translates into higher energy consumption.
Need for the requested waiver:
1.5 It is clear that the law requires commercial refrigerators
to be tested and certified using the test procedure set forth at 10
C.F.R. Pt 431, Subpt. C, Sec. 431.64--or be subject to a waiver--
before they are sold in commerce. But DOE's test procedure which
establishes the 38 [deg]F 2 [deg]F AIT criteria based
on the medium temperature application simply does not contemplate
commercial refrigerators (remote and/or self-contained) that are
designed to hold and display bulk produce (whole, uncut fresh fruits
and/or vegetables).
1.6 There is no existing DOE Test Procedure without a waiver
establishing an alternative test procedure for such products, there
is no way to know how a model of such product should be tested,
whether a model complies with the standard, and how the model's
energy use compares to others with similar features.
1.7 Testing of commercial refrigerators intended to hold and/or
display bulk produce would increase the energy consumption and
defeat the intent and spirit of energy conservation set forth by
DOE. (NOTE: These cases do meet the maximum energy allowance limits
set forth by DOE for the applicable DOE Equipment Class with the
current AIT of 41 [deg]F ~ 50 [deg]F range. Reducing the AIT to 38
[deg]F + 2 [deg]F only for test purposes will increase the energy
consumption.)
Basic Models on which the waiver is being requested:
DBRP-03-4-R, DBRP-03-6-R, DBRP-03-8-R, DBRP-03-10-R, DBRP-03-12-R,
DBRP-03-14-R, DBRP-03-16-R,
DBRP-03-18-R, DBRP-03-20-R, DBRP-03-22-R, DBRP-03-24-R, DBRP-03-26-
R, DBRP-03-28-R,
DBRP-03-30-R, DBRP-03-32-R, DBRP-03-34-R, DBRP-03-36-R
DSRP-03-5-R, DSRP-03-6-R, DSRP-03-8-R, DSRP-03-10-R, DSRP-03-12-R,
DSRP-03-14-R, DSRP-03-16-R,
DSRP-03-18-R, DSRP-03-20-R, DSRP-03-22-R, DSRP-03-24-R, DSRP-03-26-
R, DSRP-03-28-R, DSRP-03-30-R,
DSRP-03-32-R, DSRP-03-34-R, DSRP-03-36-R
[[Page 4803]]
DSRPI-03-5-R, DSRPI-03-6-R, DSRPI-03-8-R, DSRPI-03-10-R, DSRPI-03-
12-R, DSRPI-03-14-R,
DSRPI-03-16-R, DSRPI-03-18-R, DSRPI-03-20-R, DSRPI-03-22-R, DSRPI-
03-24-R, DSRPI-03-26-R,
DSRPI-03-28-R, DSRPI-03-30-R, DSRPI-03-32-R, DSRPI-03-34-R, DSRPI-
03-36-R
Specific Requirements sought to be waived--Commercial
Refrigerators intended to hold and/or display bulk produce (whole,
uncut fresh fruits and/or vegetables) shall be exempt from DOE's
requirement to test and certify in accordance with 10 C.F.R. Pt 431
and be exempt from certification, compliance and enforcement in
accordance with 10 C.F.R. Pt 429.
List of manufacturers of all other basic models marketed in the
United States and known to the petitioner to incorporate similar
design characteristic(s)--
Manufacturer: Hill Phoenix Models: OEP, O3IP, and OIP
Manufacturer: Kysor Warren Models: P1W
Application for Interim Waiver
Request for a test procedure Interim Waiver from DOE pursuant to
provisions described in 10 CFR 431.401 for the following product on
the grounds of ``The prescribed test procedures may evaluate the
basic model in a manner so unrepresentative of its true energy
consumption characteristics as to provide materially inaccurate
comparative data''
The design characteristics constituting the grounds for the
Interim Waiver Application:
1.1 Commercial Refrigerators are intended to hold and display
bulk produce (whole, uncut fresh fruits and/or vegetables). These
refrigerators are manufactured in both ``Remote'' and ``Self-
Contained'' version.
1.2 These commercial refrigerators are typically designed to
hold the produce at an Average Integrated Temperature (AIT) of 41
[deg]F ~ 50 [deg]F range (The amount and method of merchandising the
food product varies which results in a wide range of AIT). Whole,
uncut fresh fruits/vegetables are not considered to be potentially
hazardous foods by the FDA and therefore do not require time/
temperature control for safety of the food. Moreover, the optimum
temperature range to preserve freshness is 40 [deg]F ~ 50 [deg]F.
1.3 DOE requires testing Medium Temperature commercial
refrigerators at an AIT of 38 [deg]F 2 [deg]F.
1.4 In order to reduce the AIT from the existing 41 [deg]F ~ 50
[deg]F range to an AIT of 38 [deg]F 2 [deg]F,
manufacturers will have to take the following steps:
a) Increase energy consumption to reduce the AIT.
b) Significantly change the design.
c) Use higher energy consuming components such as condensing
units or increase the number of energy consuming components such as
condensing units, and
d) Use evaporator coils that would consume higher amounts of
refrigerant and use higher capacity coil which will consume more
BTU's which translates into higher energy consumption.
Need for the requested Interim Waiver:
1.5 It is clear that the law requires commercial refrigerators
to be tested and certified using the test procedure set forth at 10
C.F.R. Pt 431, Subpt. C, Sec. 431.64--or be subject to a waiver--
before they are sold in commerce. But DOE's test procedure which
establishes the 38 [deg]F 2 [deg]F AIT criteria based
on the medium temperature application simply does not contemplate
commercial refrigerators (remote and/or self-contained) that are
designed to hold and display bulk produce (whole, uncut fresh fruits
and/or vegetables).
1.6 There is no existing DOE Test Procedure without a waiver
establishing an alternative test procedure for such products, there
is no way to know how a model of such product should be tested,
whether a model complies with the standard, and how the model's
energy use compares to others with similar features.
1.7 Testing of commercial refrigerators intended to hold and/or
display bulk produce would increase the energy consumption and
defeat the intent and spirit of energy conservation set forth by
DOE. (NOTE: These cases do meet the maximum energy allowance limits
set forth by DOE for the applicable DOE Equipment Class with the
current AIT of 41 [deg]F ~ 50 [deg]F range. Reducing the AIT to 38
[deg]F + 2 [deg]F only for test purposes will increase the energy
consumption.)
Basic Models on which the Interim Waiver is being requested:
DBRP-03-4-R, DBRP-03-6-R, DBRP-03-8-R, DBRP-03-10-R, DBRP-03-12-R,
DBRP-03-14-R, DBRP-03-16-R,
DBRP-03-18-R, DBRP-03-20-R, DBRP-03-22-R, DBRP-03-24-R, DBRP-03-26-
R, DBRP-03-28-R,
DBRP-03-30-R, DBRP-03-32-R, DBRP-03-34-R, DBRP-03-36-R
DSRP-03-5-R, DSRP-03-6-R, DSRP-03-8-R, DSRP-03-10-R, DSRP-03-12-R,
DSRP-03-14-R, DSRP-03-16-R,
DSRP-03-18-R, DSRP-03-20-R, DSRP-03-22-R, DSRP-03-24-R, DSRP-03-26-
R, DSRP-03-28-R, DSRP-03-30-R,
DSRP-03-32-R, DSRP-03-34-R, DSRP-03-36-R
DSRPI-03-5-R, DSRPI-03-6-R, DSRPI-03-8-R, DSRPI-03-10-R, DSRPI-03-
12-R, DSRPI-03-14-R,
DSRPI-03-16-R, DSRPI-03-18-R, DSRPI-03-20-R, DSRPI-03-22-R, DSRPI-
03-24-R, DSRPI-03-26-R,
DSRPI-03-28-R, DSRPI-03-30-R, DSRPI-03-32-R, DSRPI-03-34-R, DSRPI-
03-36-R
Specific Requirements sought to be waived--Commercial
Refrigerators intended to hold and/or display bulk produce (whole,
uncut fresh fruits and/or vegetables) shall be exempt from DOE's
requirement to test and certify in accordance with 10 C.F.R. Pt 431
and be exempt from certification, compliance and enforcement in
accordance with 10 C.F.R. Pt 429.
Alternate test procedures known to the petitioner to evaluate
the characteristics of the basic model in a manner representative of
its energy consumption--An alternate test temperature of 49 2 degrees Fahrenheit would be an acceptable test temperature.
Success of the application for Interim Waiver will: Ensure that
the spirit and intent of conserving energy by DOE is followed and
maintained.
What economic hardship and/or competitive disadvantage is likely
to result absent a favorable determination on the Application for
Interim Waiver--Economic hardship will be loss of sales due to not
meeting the DOE requirements set forth. If the existing products
were altered to meet the current DOE requirements, it would add
significant cost and increase energy consumption.
Conclusion:
Hussmann Corporation seeks an Interim Waiver from DOE's current
requirement to test and certify in accordance with 10 C.F.R. Pt 431
and be exempt from certification, compliance and enforcement in
accordance with 10 C.F.R. Pt. 429. Such a waiver is necessary
because the current prescribed test procedures produce materially
inaccurate and unrepresentative data for regulatory and consumer
information purposes.
Hussmann Corporation respectfully asks the Department of Energy
to grant an Interim Waiver from existing test standards until such
time as a representative test procedure is developed and adopted for
this class of products.
If we can provide further information, or if it would be helpful
to discuss any of these matters further, please contact Ron Shebik,
Compliance Manager, at (314) 298-6483.
Sincerely,
Ron Shebik
Compliance Manager, Hussmann Corporation
12999 St. Charles Rock Road
Bridgeton, MO 63044
[FR Doc. 2012-2045 Filed 1-30-12; 8:45 am]
BILLING CODE 6450-01-P