[Federal Register Volume 77, Number 38 (Monday, February 27, 2012)]
[Rules and Regulations]
[Pages 11390-11394]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-4563]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 63
[EPA-R09-OAR-2012-0117; FRL-9635-7]
Delegation of National Emission Standards for Hazardous Air
Pollutants for Source Categories; Nevada
AGENCY: Environmental Protection Agency (EPA).
ACTION: Direct final rule.
-----------------------------------------------------------------------
SUMMARY: EPA is amending certain regulations to reflect the current
delegation status of national emission standards for hazardous air
pollutants (NESHAP) in Nevada. Several NESHAP were delegated to the
Nevada Division of Environmental Protection on October 6, 2011. The
purpose of this action is to update the listing in the Code of Federal
Regulations.
DATES: This rule is effective on April 27, 2012 without further notice,
unless EPA receives adverse comments by March 28, 2012. If we receive
such comments, we will publish a timely withdrawal in the Federal
Register to notify the public that this direct final rule will not take
effect.
ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR-
2012-0117, by one of the following methods:
1. Federal eRulemaking Portal: www.regulations.gov. Follow the on-
line instructions.
2. Email: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel (AIR-4), U.S. Environmental
Protection Agency Region IX, 75 Hawthorne Street, San Francisco, CA
94105-3901.
Instructions: All comments will be included in the public docket
without change and may be made available online at www.regulations.gov,
including any personal information provided, unless the comment
includes Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Information that you
consider CBI or otherwise protected should be clearly identified as
such and should not be submitted through www.regulations.gov or email.
www.regulations.gov is an ``anonymous access'' system, and EPA will not
know your identity or contact information unless you provide it in the
body of your comment. If you send email directly to EPA, your email
address will be automatically captured and included as part of the
public comment. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment. Electronic files should avoid the use of
special characters, any form of encryption, and be free of any defects
or viruses.
Docket: The index to the docket for this action is available
electronically at www.regulations.gov and in hard copy at EPA Region
IX, 75 Hawthorne Street, San Francisco, California. While all documents
in the docket are listed in the index, some information may be publicly
available only at the hard copy location (e.g., copyrighted material),
and some may not be publicly available in either location (e.g., CBI).
To inspect the hard copy materials, please schedule an appointment
during normal business hours with the contact listed in the FOR FURTHER
INFORMATION CONTACT section.
FOR FURTHER INFORMATION CONTACT: Rynda Kay, EPA Region IX, (415) 947-
4118, kay.rynda@epa.gov.
SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us'' and
``our'' refer to EPA.
Table of Contents
I. Background
A. Delegation of NESHAP
B. NDEP Delegations
II. EPA Action
III. Statutory and Executive Order Reviews
I. Background
A. Delegation of NESHAP
Section 112(l) of the Clean Air Act, as amended in 1990 (CAA),
authorizes EPA to delegate to State or local air pollution control
agencies the authority to implement and enforce the standards set out
in the Code of Federal Regulations, Title 40 (40 CFR), part 63,
National Emission Standards for Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA promulgated regulations, codified
at 40 CFR part 63, Subpart E (hereinafter referred to as ``Subpart
E''), establishing procedures for EPA's approval of State rules or
programs under section 112(l) (see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65 FR 55810).
Any request for approval under CAA section 112(l) must meet the
approval criteria in 112(l)(5) and Subpart E. To streamline the
approval process for future applications, a State or local agency may
submit a one-time demonstration that it has adequate authorities and
resources to implement and enforce any CAA section 112 standards. If
such demonstration is approved, then the State or local agency would no
longer need to resubmit a demonstration of these same authorities and
resources for every subsequent request for delegation of CAA section
112 standards. However, EPA maintains the authority to withdraw its
approval if the State does not adequately implement or enforce an
approved rule or program.
B. NDEP Delegations
On May 27, 1998, EPA published a direct final action delegating to
the NDEP several NESHAP and approving NDEP's delegation mechanism for
future standards (see 63 FR 28906). That action explained the procedure
for EPA to grant future delegations to NDEP by letter, with periodic
Federal Register listings of standards that have been delegated. On
August 19, 2011, NDEP requested delegation of the following NESHAP
contained in 40 CFR part 63:
The amendments to Subpart LLL--NESHAP from the Portland
Cement Manufacturing Industry, as set forth in 75 FR 54970 (September
9, 2010).
The amendments to Subpart ZZZZ--NESHAP for Stationary
Reciprocating Internal Combustion Engines, as set forth in 75 FR 51570
(August 20, 2010) and 76 FR 12863 (March 9, 2011).
Subpart DDDDD--NESHAP for Industrial, Commercial, and
Institutional Boilers and Process Heaters.
Subpart BBBBBB--NESHAP for Source Category: Gasoline
Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities.
Subpart CCCCCC--NESHAP for Source Category: Gasoline
Dispensing Facilities.
Subpart HHHHHH--NESHAP: Paint Stripping and Miscellaneous
Surface Coating Operations at Area Sources.
Subpart JJJJJJ--NESHAP for Industrial, Commercial, and
Institutional Boilers Area Sources.
Subpart VVVVVV--NESHAP for Chemical Manufacturing Area
Sources.
Subpart WWWWWW--NESHAP: Area Source Standards for Plating
and Polishing Operations.
Subpart XXXXXX--NESHAP Area Source Standards for Nine
Metal Fabrication and Finishing Source Categories.
Subpart ZZZZZZ--NESHAP: Area Source Standards for
Aluminum, Copper, and Other Nonferrous Foundries.
[[Page 11391]]
Subpart AAAAAAA--NESHAP for Area Sources: Asphalt
Processing and Asphalt Roofing Manufacturing.
Subpart BBBBBBB--NESHAP for Area Sources: Chemical
Preparations Industry.
Subpart CCCCCCC--NESHAP for Area Sources: Paints and
Allied Products Manufacturing.
Subpart EEEEEEE--NESHAP: Gold Mine Ore Processing and
Production Area Source Category.
On October 6, 2011, EPA granted delegation to NDEP for these
NESHAP, along with any amendments made to previously-delegated NESHAP
as of July 1, 2010. Today's action is serving to notify the public of
the October 6, 2011, delegation and to codify these delegations into
the Code of Federal Regulations.
II. EPA Action
Today's document serves to notify the public of the delegation of
NESHAP to NDEP on October 6, 2011. Today's action will codify these
delegations into the CFR.
III. Statutory and Executive Order Reviews
Under the CAA, the Administrator is required to approve delegation
requests that comply with the provisions of the CAA and applicable
Federal regulations. 42 U.S.C. 7412(l); 40 CFR 63.91(b). Thus, in
reviewing delegation submissions, EPA's role is to approve State
choices, provided that they meet the criteria of the CAA. Accordingly,
this action merely approves State law as meeting Federal requirements
and does not impose additional requirements beyond those imposed by
State law. For that reason, this action:
Is not a ``significant regulatory action'' subject to
review by the Office of Management and Budget under Executive Order
12866 (58 FR 51735, October 4, 1993);
Does not impose an information collection burden under the
provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.);
Is certified as not having a significant economic impact
on a substantial number of small entities under the Regulatory
Flexibility Act (5 U.S.C. 601 et seq.);
Does not contain any unfunded mandate or significantly or
uniquely affect small governments, as described in the Unfunded
Mandates Reform Act of 1995 (Pub. L. 104-4);
Does not have Federalism implications as specified in
Executive Order 13132 (64 FR 43255, August 10, 1999);
Is not an economically significant regulatory action based
on health or safety risks subject to Executive Order 13045 (62 FR
19885, April 23, 1997);
Is not a significant regulatory action subject to
Executive Order 13211 (66 FR 28355, May 22, 2001);
Is not subject to requirements of Section 12(d) of the
National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272
note) because application of those requirements would be inconsistent
with the CAA; and
Does not provide EPA with the discretionary authority to
address disproportionate human health or environmental effects with
practical, appropriate, and legally permissible methods under Executive
Order 12898 (59 FR 7629, February 16, 1994).
In addition, this rule does not have tribal implications as specified
by Executive Order 13175 (65 FR 67249, November 9, 2000), because the
delegations are not approved to apply in Indian country located in the
State, and EPA notes that it will not impose substantial direct costs
on tribal governments or preempt tribal law.
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the
Small Business Regulatory Enforcement Fairness Act of 1996, generally
provides that before a rule may take effect, the agency promulgating
the rule must submit a rule report, which includes a copy of the rule,
to each House of the Congress and to the Comptroller General of the
United States. EPA will submit a report containing this action and
other required information to the U.S. Senate, the U.S. House of
Representatives, and the Comptroller General of the United States prior
to publication of the rule in the Federal Register. A major rule cannot
take effect until 60 days after it is published in the Federal
Register. This action is not a ``major rule'' as defined by 5 U.S.C.
804(2).
Under section 307(b)(1) of the CAA, petitions for judicial review
of this action must be filed in the United States Court of Appeals for
the appropriate circuit by April 27, 2012. Filing a petition for
reconsideration by the Administrator of this final rule does not affect
the finality of this action for the purposes of judicial review nor
does it extend the time within which a petition for judicial review may
be filed, and shall not postpone the effectiveness of such rule or
action. Parties with objections to this direct final rule are
encouraged to file a comment in response to the parallel notice of
proposed rulemaking for this action published in the Proposed Rules
section of today's Federal Register, rather than file an immediate
petition for judicial review of this direct final rule, so that EPA can
withdraw this direct final rule and address the comment in the proposed
rulemaking. This action may not be challenged later in proceedings to
enforce its requirements (see section 307(b)(2)).
Authority: This action is issued under the authority of Section
112 of the Clean Air Act, as amended, 42 U.S.C. Section 7412.
List of Subjects in 40 CFR Part 63
Environmental protection, Administrative practice and procedure,
Air pollution control, Hazardous substances, Intergovernmental
relations, Reporting and recordkeeping requirements.
Dated: February 13, 2012.
Deborah Jordan,
Director, Air Division, Region IX.
Title 40, chapter I, part 63 of the Code of Federal Regulations is
amended as follows:
PART 63--[AMENDED]
0
1. The authority citation for Part 63 continues to read as follows:
Authority: 42 U.S.C. 7401, et seq.
Subpart E--Approval of State Programs and Delegation of Federal
Authorities
0
2. Section 63.99 is amended by revising the table in paragraph
(a)(29)(i) to read as follows:
Sec. 63.99 Delegated Federal authorities.
(a) * * *
(29) * * *
(i) * * *
Delegation Status for Part 63 Standards--Nevada
----------------------------------------------------------------------------------------------------------------
Subpart Description NDEP \1\ Washoe \2\ Clark \3\
----------------------------------------------------------------------------------------------------------------
A............................... General Provisions......... X X X
F............................... Synthetic Organic Chemical X ............... X
Manufacturing Industry.
[[Page 11392]]
G............................... Synthetic Organic Chemical X ............... X
Manufacturing Industry:
Process Vents, Storage
Vessels, Transfer
Operations, and Wastewater.
H............................... Organic Hazardous Air X ............... X
Pollutants: Equipment
Leaks.
I............................... Organic Hazardous Air X ............... X
Pollutants: Certain
Processes Subject to the
Negotiated Regulation for
Equipment Leaks.
J............................... Polyvinyl Chloride and X ............... X
Copolymers Production.
L............................... Coke Oven Batteries........ X ............... X
M............................... Perchloroethylene Dry X X X
Cleaning.
N............................... Hard and Decorative X X X
Chromium Electroplating
and Chromium Anodizing
Tanks.
O............................... Ethylene Oxide X X X
Sterilization Facilities.
Q............................... Industrial Process Cooling X ............... X
Towers.
R............................... Gasoline Distribution X X X
Facilities.
S............................... Pulp and Paper............. X ............... X
T............................... Halogenated Solvent X X X
Cleaning.
U............................... Group I Polymers and Resins X ............... X
W............................... Epoxy Resins Production and X ............... X
Non-Nylon Polyamides
Production.
X............................... Secondary Lead Smelting.... X ............... X
Y............................... Marine Tank Vessel Loading X ............... ...............
Operations.
AA.............................. Phosphoric Acid X ............... X
Manufacturing Plants.
BB.............................. Phosphate Fertilizers X ............... X
Production Plants.
CC.............................. Petroleum Refineries....... X ............... X
DD.............................. Off-Site Waste and Recovery X ............... X
Operations.
EE.............................. Magnetic Tape Manufacturing X ............... X
Operations.
GG.............................. Aerospace Manufacturing and X ............... X
Rework Facilities.
HH.............................. Oil and Natural Gas X ............... X
Production Facilities.
II.............................. Shipbuilding and Ship X ............... X
Repair (Surface Coating).
JJ.............................. Wood Furniture X ............... X
Manufacturing Operations.
KK.............................. Printing and Publishing X X X
Industry.
LL.............................. Primary Aluminum Reduction X ............... X
Plants.
MM.............................. Chemical Recovery X ............... X
Combustion Sources at
Kraft, Soda, Sulfite, and
Stand-Alone Semichemical
Pulp Mills.
OO.............................. Tanks--Level 1............. X ............... X
PP.............................. Containers................. X ............... X
QQ.............................. Surface Impoundments....... X ............... X
RR.............................. Individual Drain Systems... X ............... X
SS.............................. Closed Vent Systems, X ............... X
Control Devices, Recovery
Devices and Routing to a
Fuel Gas System or a
Process.
TT.............................. Equipment Leaks--Control X ............... X
Level 1.
UU.............................. Equipment Leaks--Control X ............... X
Level 2.
VV.............................. Oil-Water Separators and X ............... X
Organic-Water Separators.
WW.............................. Storage Vessels (Tanks)-- X ............... X
Control Level 2.
XX.............................. Ethylene Manufacturing X ............... X
Process Units: Heat
Exchange Systems and Waste
Operations.
YY.............................. Generic MACT Standards..... X ............... X
CCC............................. Steel Pickling............. X ............... X
DDD............................. Mineral Wool Production.... X ............... X
EEE............................. Hazardous Waste Combustors. X ............... X
GGG............................. Pharmaceuticals Production. X ............... X
HHH............................. Natural Gas Transmission X ............... X
and Storage Facilities.
III............................. Flexible Polyurethane Foam X ............... X
Production.
JJJ............................. Group IV Polymers and X ............... X
Resins.
LLL............................. Portland Cement X ............... X
Manufacturing Industry.
MMM............................. Pesticide Active Ingredient X ............... X
Production.
NNN............................. Wool Fiberglass X ............... X
Manufacturing.
OOO............................. Manufacture of Amino/ X ............... X
Phenolic Resins.
PPP............................. Polyether Polyols X ............... X
Production.
QQQ............................. Primary Copper Smelting.... X ............... X
RRR............................. Secondary Aluminum X ............... X
Production.
TTT............................. Primary Lead Smelting...... X ............... X
UUU............................. Petroleum Refineries: X ............... X
Catalytic Cracking,
Catalytic Reforming, and
Sulfur Recovery Units.
VVV............................. Publicly Owned Treatment X X X
Works.
XXX............................. Ferroalloys Production..... X ............... X
AAAA............................ Municipal Solid Waste X ............... X
Landfills.
CCCC............................ Manufacturing of X ............... X
Nutritional Yeast.
DDDD............................ Plywood and Composite Wood X ............... X
Products.
EEEE............................ Organic Liquids X X X
Distribution (non-
gasoline).
FFFF............................ Miscellaneous Organic X ............... X
Chemical Manufacturing.
GGGG............................ Solvent Extraction for X ............... X
Vegetable Oil Production.
HHHH............................ Wet-Formed Fiberglass Mat X ............... X
Production.
IIII............................ Surface Coating of X ............... X
Automobiles and Light-Duty
Trucks.
[[Page 11393]]
JJJJ............................ Paper and Other Web Coating X ............... X
KKKK............................ Surface Coating of Metal X ............... X
Cans.
MMMM............................ Miscellaneous Metal Parts X ............... X
and Products.
NNNN............................ Large Appliances........... X ............... X
OOOO............................ Printing, Coating, and X ............... X
Dyeing of Fabrics and
Other Textiles.
PPPP............................ Surface Coating of Plastic X ............... X
Parts and Products.
QQQQ............................ Wood Building Products..... X ............... X
RRRR............................ Surface Coating of Metal X ............... X
Furniture.
SSSS............................ Surface Coating of Metal X ............... X
Coil.
TTTT............................ Leather Finishing X ............... X
Operations.
UUUU............................ Cellulose Products X ............... X
Manufacturing.
VVVV............................ Boat Manufacturing......... X ............... X
WWWW............................ Reinforced Plastics X X X
Composites Production.
XXXX............................ Tire Manufacturing......... X ............... X
YYYY............................ Stationary Combustion X ............... X
Turbines.
ZZZZ............................ Stationary Reciprocating X X X
Internal Combustion
Engines.
AAAAA........................... Lime Manufacturing Plants.. X ............... X
BBBBB........................... Semiconductor Manufacturing X ............... X
CCCCC........................... Coke Oven: Pushing, X ............... X
Quenching and Battery
Stacks.
DDDDD........................... Industrial, Commercial, and X ............... X
Institutional Boiler and
Process Heaters.
EEEEE........................... Iron and Steel Foundries... X ............... X
FFFFF........................... Integrated Iron and Steel.. X ............... X
GGGGG........................... Site Remediation........... X ............... X
HHHHH........................... Miscellaneous Coating X ............... X
Manufacturing.
IIIII........................... Mercury Emissions from ............... ............... X
Mercury Cell Chlor-Alkali
Plants.
JJJJJ........................... Brick and Structural Clay X ............... X
Products Manufacturing.
KKKKK........................... Clay Ceramics Manufacturing X ............... X
LLLLL........................... Asphalt Roofing and X ............... X
Processing.
MMMMM........................... Flexible Polyurethane Foam X ............... X
Fabrication Operation.
NNNNN........................... Hydrochloric Acid X ............... X
Production.
PPPPP........................... Engine Test Cells/Stands... X ............... X
QQQQQ........................... Friction Products X ............... X
Manufacturing.
RRRRR........................... Taconite Iron Ore ............... ............... X
Processing.
SSSSS........................... Refractory Products X ............... X
Manufacturing.
TTTTT........................... Primary Magnesium Refining. ............... ............... X
WWWWW........................... Hospital Ethylene Oxide X X X
Sterilizers.
YYYYY........................... Electric Arc Furnace X ............... X
Steelmaking Facilities
(area sources).
ZZZZZ........................... Iron and Steel Foundries X ............... X
Area Sources.
BBBBBB.......................... Gasoline Distribution Bulk X X X
Terminals, Bulk Plants and
Pipeline Facilities.
CCCCCC.......................... Gasoline Dispensing X X X
Facilities.
DDDDDD.......................... Polyvinyl Chloride and X ............... X
Copolymers Production Area
Sources.
EEEEEE.......................... Primary Copper Smelting X ............... X
Area Sources.
FFFFFF.......................... Secondary Copper Smelting X ............... X
Area Sources.
GGGGGG.......................... Primary Nonferrous Metals X ............... X
Area Sources--Zinc,
Cadmium, and Beryllium.
HHHHHH.......................... Paint Stripping and X X X
Miscellaneous Surface
Coating Operations at Area
Sources.
JJJJJJ.......................... Industrial, Commercial, and X ............... ...............
Institutional Boilers and
Process Heaters--Area
Sources.
LLLLLL.......................... Acrylic and Modacrylic X ............... X
Fibers Production Area
Sources.
MMMMMM.......................... Carbon Black Production X ............... X
Area Sources.
NNNNNN.......................... Chemical Manufacturing Area X ............... X
Sources: Chromium
Compounds.
OOOOOO.......................... Flexible Polyurethane Foam X X X
Production and Fabrication
Area Sources.
PPPPPP.......................... Lead Acid Battery X ............... X
Manufacturing Area Sources.
QQQQQQ.......................... Wood Preserving Area X ............... X
Sources.
RRRRRR.......................... Clay Ceramics Manufacturing X ............... X
Area Sources.
SSSSSS.......................... Glass Manufacturing Area X ............... X
Sources.
TTTTTT.......................... Secondary Nonferrous Metals X ............... X
Processing Area Sources.
VVVVVV.......................... Chemical Manufacturing X ............... ...............
Industry--Area Sources.
WWWWWW.......................... Area Source Standards for X X X
Plating and Polishing
Operations.
XXXXXX.......................... Area Source Standards for X X X
Nine Metal Fabrication and
Finishing Source
Categories.
YYYYYY.......................... Area Sources: Ferroalloys ............... ............... X
Production Facilities.
ZZZZZZ.......................... Area Source Standards for X ............... X
Aluminum, Copper, and
Other Nonferrous Foundries.
AAAAAAA......................... Asphalt Processing and X ............... ...............
Asphalt Roofing
Manufacturing--Area
Sources.
BBBBBBB......................... Chemical Preparations X ............... ...............
Industry--Area Sources.
CCCCCCC......................... Paint and Allied Products X ............... ...............
Manufacturing--Area
Sources.
EEEEEEE......................... Gold Mine Ore Processing X ............... ...............
and Production--Area
Sources.
----------------------------------------------------------------------------------------------------------------
\1\ Nevada Division of Environmental Protection.
\2\ Washoe County Air Quality Management Division.
\3\ Clark County Department of Air Quality Management.
[[Page 11394]]
* * * * *
[FR Doc. 2012-4563 Filed 2-24-12; 8:45 am]
BILLING CODE 6560-50-P