[Federal Register Volume 77, Number 74 (Tuesday, April 17, 2012)]
[Notices]
[Pages 22780-22785]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-9227]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2012-0259; FRL-9345-5]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
[[Page 22781]]
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Chemical
Substances Inventory (TSCA Inventory)) to notify EPA and comply with
the statutory provisions pertaining to the manufacture of new
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to
publish in the Federal Register a notice of receipt of a premanufacture
notice (PMN) or an application for a test marketing exemption (TME),
and to publish in the Federal Register periodic status reports on the
new chemicals under review and the receipt of notices of commencement
(NOC) to manufacture those chemicals. This document, which covers the
period from March 1, 2012 to March 23, 2012, and provides the required
notice and status report, consists of the PMNs and TMEs, both pending
or expired, and the NOC to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before May 17, 2012.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2012-0259, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the DCO's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: EPA's policy is that all comments received will be
included in the docket without change and may be made available on-line
at http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or
email. The regulations.gov Web site is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an email
comment directly to EPA without going through regulations.gov, your
email address will be automatically captured and included as part of
the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index
available at http://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at http://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
legal holidays. The telephone number of the EPA/DC Public Reading Room
is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division (7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; fax number: (202) 564-8955; email address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
If you have any questions regarding the applicability of this action to
a particular entity, consult the person listed under FOR FURTHER
INFORMATION CONTACT.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at
[[Page 22782]]
your estimate in sufficient detail to allow for it to be reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA taking this action?
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA section
5(a), for ``test marketing'' purposes, which is referred to as a test
marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals. This status report, which covers the
period from March 1, 2012 to March 23, 2012, consists of the PMNs and
TMEs, both pending or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. Receipt and Status Reports
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.
Table I--45 PMNs Received From 03/01/12 to 3/23/12
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer/importer Use Chemical
date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-12-0216.................... 03/01/2012 05/29/2012 CBI............................... (G) Laundry and auto (G) Carbohydrate, polymers
dishwash additive. with acrylic acid and
maleic anhydride,
maltodextrin and
methacrylic acid, sodium
salt, hydrogen peroxide-
and peroxydisulfuric acid
([(Ho)s(O)2]2O2) sodium
salt (1:2)-initiated.
P-12-0217.................... 03/01/2012 05/29/2012 CBI............................... (G) Laundry and auto (G) Carbohydrate, polymers
dishwash additive. with acrylic acid
maltodextrin, sodium salt,
hydrogen peroxide- and
peroxydisulfuric acid
([(Ho)s(O)2]2O2) sodium
salt (1:2)-initiated.
P-12-0218.................... 03/01/2012 05/29/2012 CBI............................... (G) Laundry and auto (G) Carbohydrate, telomers
dishwash additive. with acrylic acid, iso-pr
alcohol, maltodextrin, 3-
mercaptopropanoic acid and
styrene, sodium salt,
hydrogen peroxide- and
peroxydisulfuric acid
([(Ho)s(O)2]2O2) sodium
salt (1:2)-initiated.
P-12-0219.................... 03/01/2012 05/29/2012 CBI............................... (G) Laundry and auto (G) Carbohydrate, polymers
dishwash additive. with acrylic acid and
maleic anhydride,
maltodextrin, and
methacrylic acid, ammonium
salt, hydrogen peroxide-
and peroxydisulfuric acid
([(Ho)s(O)2]2O2) sodium
salt (1:2)-initiated.
P-12-0220.................... 03/04/2012 06/01/2012 Cytec Industries, Inc............. (G) Coating resin...... (G) Substituted
carbomonocycle, polymers
with reduced alkyl esters
of reduced polymerized
oxidized halosubstituted
alkene, polyalkanoic acid,
substituted alkenyl ester-
blocked.
P-12-0221.................... 03/05/2012 06/02/2012 Dow Chemical Company.............. (G) Polymer (G) Acrylic polymer.
intermediate.
P-12-0222.................... 03/06/2012 06/03/2012 CBI............................... (G) Additive for (G) Alkyl acrylate cross-
property improvement linked copolymer.
in films and coatings.
P-12-0223.................... 03/06/2012 06/03/2012 CBI............................... (G) Solvent............ (G) Glycol ether.
P-12-0224.................... 03/07/2012 06/04/2012 CBI............................... (G) A component in (G) Ester.
dishwashing
applications.
P-12-0225.................... 03/07/2012 06/04/2012 American Chemical Ltd............. (S) Special catalyst (S) Diphenyl[mu-
for elastomer and [(tetrapropenyl)succinato(2-
molded two-component )-
polyurathanes. o:o']]dimercury(phenylmercu
ry
tetrapropenylsuccinate)*.
[[Page 22783]]
P-12-0226.................... 03/07/2012 06/04/2012 Carboline Company................. (S) The PMN substances (G) Alkyl ketimines;
are components of a polymeric ketimines.
crosslinked phenolic-
epoxy coating system
used to produce a
water-immersion lining
on concrete and steel.
The coating may also
be used on tanks for
crude oil service,
brine and water/oil
mixtures. The PMN
substances extend the
pot life of the
coating system. Once
the phenolic-erpoxy
resin cures, none of
the pmn substances
remain in the coating.
P-12-0227.................... 03/07/2012 06/04/2012 Zeon Chemicals L.P................ (S) Used to make molds (G) Polycycloolefin polymer.
for optical lenses/
prisms.
P-12-0228.................... 03/08/2012 06/05/2012 CBI............................... (G) Coating (G) Substituted quaternary
applications. alkyl ammonium chloride.
P-12-0229.................... 03/12/2012 06/09/2012 Huntsman Corporation.............. (S) Exhaust dyeing of (G) Subsituted aromatic
cellulosic fabrics. diazo sulfonic acid salts.
P-12-0230.................... 03/12/2012 06/09/2012 CBI............................... (G) Processing aid..... (G) Alkylaminediol acetate
salt.
P-12-0231.................... 03/12/2012 06/09/2012 CBI............................... (G) Processing aid..... (G) Ethoxylated
alkylaminediol acetate
salt.
P-12-0232.................... 03/12/2012 06/09/2012 The Dial Corporation, a Henkel (S) Fragrance for (S) 1H,3H,5H-oxazolo[3,4-
Company. household cleaning c]oxazole, dihydro-3,5-
products and laundry. bis[1-methyl-2-[4-(1-
methylethylphenyl]ethyl]-.
P-12-0233.................... 03/12/2012 06/09/2012 The Dial Corporation, a Henkel (S) Fragrance for (S) 1H,3H,5H-oxazolo[3,4-
Company. household cleaning c]oxazole, dihydro-3,5-
products and laundry. bis(1-methyldecyl)-.
P-12-0234.................... 03/12/2012 06/09/2012 The Dial Corporation, a Henkel (S) Fragrance for (S) 1H,3H,5H-oxazolo[3,4-
Company. household cleaning c]oxazole, 3,5-bis(2,4-
products and laundry. dimethyl-3-cyclohexen-1-
yl)dihydro-.
P-12-0235.................... 03/14/2012 06/11/2012 CBI............................... (G) Adhesive for open, (G) Polyesterurethane.
non-descriptive use.
P-12-0236.................... 03/16/2012 06/13/2012 CBI............................... (G) Additive, open, non- (G) Polyester amine adduct.
dispersive use.
P-12-0237.................... 03/16/2012 06/13/2012 CBI............................... (G) Additive, open, non- (G) Polyester amine adduct.
dispersive use.
P-12-0238.................... 03/16/2012 06/13/2012 CBI............................... (G) Additive, open, non- (G) Polyester amine adduct.
dispersive use.
P-12-0239.................... 03/19/2012 06/16/2012 CBI............................... (G) Lamination adhesive (G) Aliphatic polyurethane.
P-12-0240.................... 03/19/2012 06/16/2012 CBI............................... (G) Processing aid..... (G) Ammonium molybdenum
tungsten nickel hydroxide
maleate.
P-12-0241.................... 03/19/2012 06/16/2012 CBI............................... (G) Water and oil (G) 2-propenoic acid, 2-
repellant. methyl-, 2-hydroxyethyl
ester, telomers with C18-26-
alkyl acrylate, 1-
dodecanethiol, N-
(hydroxymethyl)-2-methyl-2-
propenamide,
polyfluorooctyl
methacrylate, 2,2'-[1,2-
diazenediylbis(1-
methylethylidene)]-bis[4,5-
dihydro-1H-imidazole]
hydrochloride (1:2)-
initiated.
[[Page 22784]]
P-12-0242.................... 03/19/2012 06/16/2012 CBI............................... (G) Water and oil (G) 2-propenoic acid, 2-
repellant. methyl-, C16-18 alkyl
esters, telomers with 3-
chloro-2-hydroxypropyl
methacrylate,1-
dodecanethiol, N-
(hydroxymethyl)-2-methyl-2-
propenamide,
polyfluorooctyl
methacrylate and rel-
(1R,2R,4R)-1,7,7-
trimethylbicyclo[2.2.1]hept-
2-yl methacrylate, 2,2'-
[1,2-diazenediylbis(1-
methylethylidene)]-bis[4,5-
dihydro-1H-imidazole]
hydrochloride (1:2)-
initiated.
P-12-0243.................... 03/16/2012 06/13/2012 Wacker Chemical Corporation....... (G) Additive to improve (G) Copolymer of vinyl/alkyl
the impact strength of siloxanes and methacrylic
thermoplastic and acid derivatives.
thermoset polymer
systems, especially at
low temperatures.
P-12-0244.................... 03/20/2012 06/17/2012 CBI............................... (G) Coatings........... (G) Cycloaliphatic anhydride
polymer with aliphatic
polyols and aliphatic acid.
P-12-0245.................... 03/20/2012 06/17/2012 Shepherd Color Company............ (S) Colored pigment (S) Niobium sulfur tin zinc
used. oxide.
P-12-0246.................... 03/20/2012 06/17/2012 CBI............................... (G) Crosslinker........ (G) Methyl, phenyl, amino-
functional siloxanes and
silsesquixane.
P-12-0247.................... 03/21/2012 06/18/2012 CBI............................... (G) Polyester resin (G) Alkyl carboxylic acid,
solution. oxiranyl alkyl ester,
polymer with cycloalkyl
dicarboxylic acid
anhydride, alkyl alcohol
ester.
P-12-0248.................... 03/21/2012 06/18/2012 CBI............................... (G) Resin (open, non- (G) Polyester type
dispersive use). polyurethane resin.
P-12-0249.................... 03/22/2012 06/19/2012 CBI............................... (G) Chemical (G) Vegetable oil, modified
intermediate. products.
P-12-0250.................... 03/22/2012 06/19/2012 CBI............................... (G) Chemical (G) Vegetable oil, modified
intermediate. products.
P-12-0251.................... 03/22/2012 06/19/2012 CBI............................... (G) Chemical (G) Vegetable oil, modified
intermediate. products, esters.
P-12-0252.................... 03/22/2012 06/19/2012 CBI............................... (G) Chemical (G) Esters.
intermediate.
P-12-0253.................... 03/22/2012 06/19/2012 CBI............................... (G) Chemical (G) Esters.
intermediate.
P-12-0254.................... 03/22/2012 06/19/2012 Lubrigreen biosynthetics.......... (G) Lubricant base oil. (S) Fatty acids, C8-18 and
C18-unsaturated, reaction
products with isomerized
oleic acid homopolymer iso-
bu ester.
P-12-0255.................... 03/22/2012 06/19/2012 Lubrigreen biosynthetics.......... (G) Lubricant base oil. (S) Fatty acids, coco,
reaction products with
isomerized oleic acid
homopolymer, iso-bu ester.
P-12-0256.................... 03/22/2012 06/19/2012 Cytec industries, Inc............. (G) Mineral processing (G) Dialkyldithiophosphate
collector. salt.
P-12-0257.................... 03/22/2012 06/19/2012 CBI............................... (G) Destructive use.... (G) Brominated by-product
stream.
P-12-0258.................... 03/22/2012 06/19/2012 CBI............................... (G) Destructive use.... (G) Brominated aliphatic
alcohol.
P-12-0259.................... 03/22/2012 06/19/2012 CBI............................... (G) Destructive use.... (G) Brominated by-product
stream.
P-12-0260.................... 03/22/2012 06/19/2012 CBI............................... (G) Destructive use.... (G) Brominated aliphatic
alcohol.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received by EPA during this period: The EPA case number assigned to the
TME, the date the TME was received by EPA, the projected end date for
EPA's review of the TME, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the TME, and
the chemical identity.
Table II--2 TMEs Received From 03/01/12 to 03/23/12
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-12-0006............................ 03/04/2012 04/17/2012 Cytec Industries, Inc... (G) Coating resin....... (G) Substituted
carbomonocycle, polymers
with reduced alkyl esters of
reduced polymd. oxidized
halosubstituted alkene,
polyalkanoic acid,
substituted alkenyl ester-
blocked.
[[Page 22785]]
T-12-0007............................ 03/22/2012 05/05/2012 Cytec Industries, Inc... (G) Mineral processing (G) Dialkyldithiophosphate
collector. salt.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.
Table III--27 NOCs Received From 03/01/12 to 03/23/12
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date notice end Chemical
date
----------------------------------------------------------------------------------------------------------------
J-11-0004.................................. 03/10/2012 01/30/2012 (G) T.reesei3417.
P-04-0623.................................. 03/07/2012 08/15/2006 (S) Hexanoic acid, 2-ethyl-, C8-12-
alkyl esters.
P-09-0362.................................. 03/07/2012 02/21/2012 (S) Poly(oxy-1,2-ethanediyl),
.alpha.-sulfo-.omega.-
(tridecyloxy)-, branched, sodium
salts.
P-10-0013.................................. 03/21/2012 03/14/2012 (G) Manganese sulfonate derivative.
P-10-0368.................................. 03/01/2012 02/17/2012 (G) Epoxy-arylamine polymer.
P-10-0449.................................. 03/01/2012 02/17/2012 (G) Polyester resin.
P-10-0531.................................. 03/01/2012 02/17/2012 (G) Unsaturated polyester resin.
P-10-0568.................................. 03/01/2012 02/17/2012 (G) Unsaturated polyester resin.
P-11-0231.................................. 03/20/2012 02/21/2012 (G) Cashew nutshell liquid amine
polymer.
P-11-0295.................................. 03/21/2012 02/26/2012 (G) Reaction product from the
oxidation of D-glucose,
neutralized with NAOH.
P-11-0296.................................. 03/22/2012 02/26/2012 (G) Reaction products from the
oxidation of D-glucose,
neutralized with sodium hydroxide
and potassium hydroxide.
P-11-0344.................................. 03/02/2012 12/12/2011 (G) Polyaromatic heterocycle
precursor.
P-11-0345.................................. 03/02/2012 12/12/2011 (G) Heterocyclic organic
intermediate.
P-11-0346.................................. 03/02/2012 12/28/2011 (G) Halogenated aromatic
heterocyclic intermediate.
P-11-0384.................................. 03/13/2012 02/02/2012 (G) Fluorinated alkylsulfonamidol
urethane polymer.
P-11-0408.................................. 03/19/2012 02/29/2012 (G) Polycarbodiimide modified
diisocyanate.
P-11-0481.................................. 03/11/2012 02/23/2012 (S) 1,2-cyclohexanedicarboxylic
acid, 1-butyl 2-(phenylmethyl)
ester.
P-11-0492.................................. 03/16/2012 02/17/2012 (G) Glycine derivative.
P-11-0586.................................. 03/19/2012 03/11/2012 (G) Substituted phthalocyanine
derivative.
P-11-0617.................................. 03/19/2012 03/11/2012 (G) Substituted xanthene
derivative.
P-11-0638.................................. 03/23/2012 03/14/2012 (G) Aminocarbonyl ammonio carboxy
modified polyolefin.
P-11-0652.................................. 03/01/2012 02/28/2012 (S) 1,4-cyclohexanedicarboxylicc
acid, 1,4-dibutyl ester.
P-11-0654.................................. 03/06/2012 03/01/2012 (S) Phenol, 2-[[[3-(1H-imidazol-1-
yl)propyl]imino]phenylmethyl]-5-
(octyloxy)-.
P-12-0001.................................. 03/23/2012 03/12/2012 (G) Aromatic isocyanate, alkyl
phenol-blocked.
P-12-0039.................................. 03/08/2012 03/07/2012 (G) Acrylic polymer.
P-12-0049.................................. 03/12/2012 02/21/2012 (G) Alkylcatechol-substituted
alkoxy-substituted calixarene.
P-12-0071.................................. 03/08/2012 03/02/2012 (S) Disphosphoric acid, magnesium
salt (1:1).
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit II to access
additional non-CBI information that may be available.
List of Subjects
Environmental protection, Chemicals, Hazardous substances, Imports,
Notice of commencement, Premanufacturer, Reporting and recordkeeping
requirements, Test marketing exemptions.
Dated: April 9, 2012.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2012-9227 Filed 4-16-12; 8:45 am]
BILLING CODE 6560-50-P