[Federal Register Volume 77, Number 102 (Friday, May 25, 2012)]
[Notices]
[Pages 31396-31398]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-12710]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2012-0017]


Reports of Injuries to Employees Operating Mechanical Power 
Presses; Extension of the Office of Management and Budget's (OMB) 
Approval of an Information Collection (Paperwork) Requirement

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend OMB approval of the information collection requirement contained 
in the Standard on Reports of Injuries to Employees Operating 
Mechanical Power Presses (29 CFR 1910.217(g)).

DATES: Comments must be submitted (postmarked, sent, or received) by 
July 24, 2012.

ADDRESSES: Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2012-0017, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Department of Labor's and Docket Office's normal 
business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number for the Information Collection Request (ICR) (OSHA-2012-
0017). All comments, including any

[[Page 31397]]

personal information you provide, are placed in the public docket 
without change, and may be made available online at http://www.regulations.gov. For further information on submitting comments see 
the ``Public Participation'' heading in the section of this notice 
titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accord with the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that information 
is in the desired format, reporting burden (time and costs) is minimal, 
collection instruments are clearly understood, and OSHA's estimate of 
the information collection burden is accurate. The Occupational Safety 
and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes 
information collection by employers as necessary or appropriate for 
enforcement of the OSH Act or for developing information regarding the 
causes and prevention of occupational injuries, illnesses, and 
accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain 
such information with minimum burden upon employers, especially those 
operating small businesses, and to reduce to the maximum extent 
feasible unnecessary duplication of efforts in obtaining information 
(29 U.S.C. 657).
    In the event a worker is injured while operating a mechanical power 
press, 29 CFR 1910.217(g) requires an employer to provide information 
to OSHA regarding the accident within 30 days of the accident. This 
information includes the employer's and worker's name(s), workplace 
address and location; injury sustained; task being performed when the 
injury occurred; number of operators required for the operation and the 
number of operators provided with controls and safeguards; cause of the 
accident; type of clutch, safeguard(s), and feeding method(s) used; and 
means used to actuate the press stroke. OSHA's Directorate of Standards 
and Guidance, or the State agency administering a plan approved by the 
Assistant Secretary of Labor for Occupational Safety and Health, 
collects the information. These reports are a source of up-to-date 
information on power press machines. Particularly, this information 
identifies the equipment used and conditions associated with these 
injuries.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information 
collection requirement contained in the Standard on Reports of Injuries 
to Employees Operating Mechanical Power Presses (29 CFR 1910.217(g)). 
OSHA is proposing to decrease the existing burden hour estimate for the 
collection of information requirement specified by the Provision from 
13 hours to 9 hours, for a total decrease of 4 hours. This adjustment 
is a result of a decline in the number of reports received by OSHA 
annually.
    The Agency will summarize the comments submitted in response to 
this notice and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Reports of Injuries to Employees Operating Mechanical Power 
Presses (29 CFR 1910.217(g)).
    OMB Number: 1218-0070.
    Affected Public: Business or other for-profits; Federal Government; 
State, Local, or Tribal Government.
    Number of Respondents: 83.
    Frequency of Response: On occasion.
    Average Time Per Response: Five minutes (.08 hour) for a secretary 
to submit the report to OSHA and 15 minutes (.25 hour) for a supervisor 
to obtain the information regarding the accident and to prepare the 
written report.
    Estimated Total Burden Hours: 9.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on this Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2012-0017). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so the Agency can attach them 
to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the  http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download through this 
Web site. All submissions, including copyrighted material, are 
available for inspection

[[Page 31398]]

and copying at the OSHA Docket Office. Information on using the http://www.regulations.gov Web site to submit comments and access the docket 
is available at the Web site's ``User Tips'' link. Contact the OSHA 
Docket Office for information about materials not available through the 
Web site, and for assistance in using the Internet to locate docket 
submissions.

V. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on May 22, 2012.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2012-12710 Filed 5-24-12; 8:45 am]
BILLING CODE 4510-26-P