[Federal Register Volume 77, Number 107 (Monday, June 4, 2012)]
[Notices]
[Pages 32965-32969]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-13437]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2012-0261; FRL-9350-5]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on

[[Page 32966]]

the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA 
and comply with the statutory provisions pertaining to the manufacture 
of new chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is 
required to publish in the Federal Register a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of notices of 
commencement (NOC) to manufacture those chemicals. This document, which 
covers the period from April 9, 2012 to April 30, 2012, and provides 
the required notice and status report, consists of the PMNs pending or 
expired, and the NOC to manufacture a new chemical that the Agency has 
received under TSCA section 5 during this time period. Two PMN's, from 
a previous date which were inadvertently omitted, are included in this 
notice.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before July 5, 2012.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2012-0192, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management Division (7407M), Office of 
Pollution Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8951; fax number: (202) 564-8955; email address: 
mudd.bernice@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action. 
If you have any questions regarding the applicability of this action to 
a particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at

[[Page 32967]]

your estimate in sufficient detail to allow for it to be reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://www.epa.gov/opt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from April 9, 2012 to April 30, 2012, consists of the PMNs 
pending or expired, and the NOCs to manufacture a new chemical that the 
Agency has received under TSCA section 5 during this time period.
    Two PMN's, P-12-214 and P-12-215 from a previous date, which were 
inadvertently omitted, are included in this notice.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                               Table I--25 PMNs Received From 04/09/12 to 04/30/12
----------------------------------------------------------------------------------------------------------------
                                     Projected
       Case No.          Received    notice end     Manufacturer/            Use                 Chemical
                           date         date          importer
----------------------------------------------------------------------------------------------------------------
P-12-0214............   03/01/2012   05/01/2012  CBI...............  Laundry and auto    Carbohydrate polymers
                                                                      dish wash           with acrylic and
                                                                      additive.           maleic anhydride,
                                                                                          sodium peroxide and
                                                                                          peroxy disulfuric acid
                                                                                          (1(HO)s(O)2]2O2)
                                                                                          sodium salt (1:2)
                                                                                          initiate.
P12-0215.............   03/01/2012   05/01/2012  CBI...............  Laundry and auto    Carbohydrate, polymers
                                                                      dish wash           with acrylic acid and
                                                                      additive.           sodium 2-methyl-2-
                                                                                          [(1oxo-2-propen-1-yl)
                                                                                          amino]-1-propane
                                                                                          sulfoate (1:1), sodium
                                                                                          salt hydrogen peroxide-
                                                                                           and peroxydisulfuric
                                                                                          acid ([HO--s(O)2 [2O2--
                                                                                          sodium salt (1:2)-
                                                                                          initiated.
P-12-0313............   04/10/2012   07/08/2012  CBI...............  (G) Resin for       (G) Thermoset acrylic
                                                                      automotive          polymer.
                                                                      coatings.
P-12-0314............   04/10/2012   07/08/2012  CBI...............  (G) Resin for       (G) Thermoset acrylic
                                                                      automotive          polymer.
                                                                      coatings.
P-12-0315............   04/10/2012   07/08/2012  CBI...............  (G) Resin for       (G) Thermoset acrylic
                                                                      automotive          polymer.
                                                                      coatings.
P-12-0316............   04/11/2012   07/09/2012  CBI...............  (S) Binder resin    (G) Amine-capped
                                                                      for aerospace       polythioether.
                                                                      sealants.
P-12-0317............   04/12/2012   07/10/2012  BASF Corporation..  (G) Resin binder    (G) Amino-hydroxy
                                                                      for printing inks.  functional
                                                                                          polyurethane resin.
P-12-0318............   04/12/2012   07/10/2012  BASF Corporation..  (G) Binder for      (G) Amino functional
                                                                      printing ink        cyclo aliphatic
                                                                      applications.       polyurethane resin.
P-12-0319............   04/12/2012   07/10/2012  Henkel Corporation  (G) Coating         (G) Polyurethane.
                                                                      material.
P-12-0320............   04/13/2012   07/11/2012  CBI...............  (G) Foam            (G) Partially
                                                                      stabilizer.         fluorinated acrylic
                                                                                          copolymer.
P-12-0321............   04/12/2012   07/10/2012  3M Company--Group.  (G) Monomer.......  (G) Aliphatic acrylate
                                                                                          mixture.
P-12-0322............   04/17/2012   07/15/2012  CBI...............  (G) Paint and/or    (G) Alkenoic acid,
                                                                      inks.               polymer with alkyl
                                                                                          acrylate, peroxide-
                                                                                          initiated, compound
                                                                                          with amine salt.
P-12-0323............   04/18/2012   07/16/2012  CBI...............  (G) Resin for       (G) Acrylic waterborne
                                                                      waterborne inks.    emulsion.
P-12-0324............   04/18/2012   07/16/2012  CBI...............  (G) Emulsifier for  (G) Polyethylene
                                                                      use in lubricants.  glycol, fatty acid,
                                                                                          polysuccinate
                                                                                          polyester.
P-12-0325............   04/20/2012   07/18/2012  CBI...............  (G) Processing aid  (G) Poly[oxy(methyl-1,2-
                                                                      for rubber.         ethanediyl)]-, ,alpha.-
                                                                                          [3-substituted-1-oxo-2-
                                                                                          alken-1-yl]-.omega.-
                                                                                          hydroxy-, alkyl
                                                                                          ethers.
P-12-0326............   04/20/2012   07/18/2012  Royal Adhesives     (S) Component of 2- (G) Dicyclohexylmethane-
                                                  and Sealants.       component           4,4'-diisocyanate,
                                                                      reactive            polymer with
                                                                      polyurethane        ethoxylated,
                                                                      adhesive resin.     propoxylated
                                                                                          polyethers.
P-12-0327............   04/20/2012   07/18/2012  CBI...............  (G) Polymer         (G) Alkylsilane.
                                                                      reinforcement.

[[Page 32968]]

 
P-12-0328............   04/23/2012   07/21/2012  CBI...............  (G) Resin in        (G) MDI modified
                                                                      production of       polyester with 1,2-
                                                                      synthetic leather.  ethanediol, iso-propyl
                                                                                          alc-blocked.
P-12-0329............   04/23/2012   07/21/2012  CBI...............  (G) Lamination      (G) MDI modified
                                                                      adhesive.           polyester with castor
                                                                                          oil.
P-12-0330............   04/24/2012   07/22/2012  CBI...............  (G) Resin for       (G) Acrylic waterborne
                                                                      waterborne inks.    emulsion.
P-12-0331............   04/24/2012   07/22/2012  CBI...............  (G) Pigment         (G) 2-propenoic acid, 2-
                                                                      dispersant.         methyl-, substituted
                                                                                          dialkylamino ethyl
                                                                                          ester, polymer with
                                                                                          butyl 2-propenoate,
                                                                                          compounds with
                                                                                          polyether hydrogen
                                                                                          maleate alkyl ethers.
P-12-0332............   04/27/2012   07/25/2012  CBI...............  (G) Destructive     (G) Brominated
                                                                      use.                distillation bottoms.
P-12-0333............   04/27/2012   07/25/2012  CBI...............  (G) Destructive     (G) Brominated
                                                                      use.                distillation bottoms.
P-12-0334............   04/27/2012   07/25/2012  CBI...............  (S) Extrusion       (G) Brassylic acid-1,
                                                                      molding of          10-decanediamine
                                                                      tubing; injection   copolymer.
                                                                      molding of
                                                                      special
                                                                      applications.
P-12-0335............   04/27/2012   07/25/2012  CBI...............  (G) Colorant for    (G) Benzoic acid, 4-
                                                                      the coloration of   [substituted diamino-5-
                                                                      cellulosic          (disubstituted
                                                                      materials.          phenylazo)-phenylazo]-
                                                                                          , sodium potassium
                                                                                          salt.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

          Table II--28 NOCs Received From 04/09/12 to 04/30/12
------------------------------------------------------------------------
                                     Commencement
     Case No.        Received date    notice end          Chemical
                                         date
------------------------------------------------------------------------
P-09-0380.........      04/25/2012      04/17/2012  (G) Barium, dialkyl
                                                     2-sulfobutanedioate
                                                     phosphate
                                                     complexes.
P-09-0384.........      04/11/2012      03/15/2012  (G) Carboxy
                                                     functional
                                                     zircoaluminate
                                                     chloride hydroxide
                                                     polymer.
P-10-0046.........      04/25/2012      04/08/2012  (S) 1,4-
                                                     benzenedicarboxylic
                                                     acid, polymer with
                                                     2,2-
                                                     bis(hydroxymethyl)-
                                                     1,3-propanediol,
                                                     hexanedioic acid,
                                                     .alpha.-hydro-
                                                     .omega.-
                                                     hydroxypoly(oxy-1,2-
                                                     ethanediyl), 1,3-
                                                     isobenzofurandione
                                                     and 2,2'-
                                                     oxybis[ethanol],
                                                     benzoate.
P-10-0098.........      04/17/2012      02/27/2012  (G) 2-propenoic
                                                     acid, 2-methyl-,
                                                     polymer with
                                                     substituted esters
                                                     with acrylic acid
                                                     and 2-propenoic
                                                     acid.
P-11-0063.........      04/17/2012      04/04/2012  (G) Perfluoroalkyl
                                                     acrylate copolymer.
P-11-0086.........      04/12/2012      03/17/2012  (G) Polyfluoroalkyl
                                                     phosphoric acid.
P-11-0359.........      04/18/2012      04/14/2012  (G) Fatty acids
                                                     polymers with
                                                     alkanoic acid,
                                                     subsituted alkyl
                                                     diol and
                                                     substituted
                                                     carbomoncycle.
P-11-0571.........      04/16/2012      04/09/2012  (G) Aryloxy
                                                     dialkanol.
P-11-0587.........      04/25/2012      04/21/2012  (G) Substituted
                                                     benzimidazol
                                                     sulfonic acid.
P-11-0618.........      04/25/2012      04/21/2012  (G) Substituted
                                                     anthraquinone
                                                     derivative.
P-11-0663.........      04/09/2012      02/16/2012  (G) Amides, from C18-
                                                     unsaturated fatty
                                                     acids
                                                     dimers,hydrogenated
                                                     benzaldehyde -
                                                     polyethylenepolyami
                                                     nes reaction
                                                     products and tall-
                                                     oil fatty acids.
P-12-0073.........      04/06/2012      04/02/2012  (G) Castor oil,
                                                     polymer with
                                                     hydrogenated
                                                     vegetable oil, 1,1'-
                                                     methylenebis[isocya
                                                     natobenzene] and
                                                     isocynate.
P-12-0074.........      04/15/2012      03/21/2012  (G) Halogenated
                                                     substituted alkane,
                                                     potassium salt.
P-12-0075.........      04/15/2012      03/21/2012  (G) Halogenated
                                                     substituted alkane,
                                                     potassium salt.
P-12-0077.........      04/15/2012      03/29/2012  (G) Salt of alkyl-
                                                     substituted
                                                     nitrogen
                                                     heterocycle.
P-12-0086.........      04/24/2012      04/13/2012  (G) Polyurethane
                                                     prepolymer.
P-12-0090.........      04/13/2012      04/06/2012  (G) Hydrocarbon
                                                     urethane.
P-12-0091.........      04/23/2012      04/10/2012  (G) Alkylacrylic
                                                     acid telomer with
                                                     carboxylic acid,
                                                     bisulfite, ester
                                                     with .alpha.-alkyl-
                                                     .omega.-
                                                     hydroxypoly(oxyalka
                                                     nediyl), alkali
                                                     metal salt.
P-12-0093.........      04/25/2012      04/10/2012  (G) Modified epoxy
                                                     resin.
P-12-0098.........      04/25/2012      04/10/2012  (G) Modified epoxy
                                                     resin.
P-12-0112.........      04/16/2012      04/09/2012  (G) Carboxylic acid,
                                                     polymer with
                                                     .alpha.-hydro-
                                                     .omega.-
                                                     hydroxypoly(oxy-1,2-
                                                     ethanediyl) and
                                                     2,2'-
                                                     oxybis[ethanol].
P-12-0119.........      04/11/2012      04/06/2012  (G) Dodeca(lithium,
                                                     sodium)-2-({4-[4-(4-
                                                     {bis[alkyl-
                                                     (sulfonatoalkoxy)-4-
                                                     ({sulfonato-
                                                     [(sulfonato-
                                                     [(substituted-
                                                     phenyl)diazenyl]phe
                                                     nyl{time} diazenyl)
                                                     anilino]-triazin-
                                                     yl{time} -6-[alkyl-
                                                     (sulfonatoalkoxy)-4-
                                                     ({sulfonato-4-
                                                     [(substituted-
                                                     phenyl)diazenyl]phe
                                                     nyl)diazenyl)anilin
                                                     o]piperazin-yl)-
                                                     triazin-ylamino]-
                                                     alkyl-
                                                     (sulfonatoalkoxy)ph
                                                     enyl{time} diazenyl
                                                     )-5-
                                                     [(sulfonatophenyl)d
                                                     iazenyl]benzenesulf
                                                     onate.
P-12-0120.........      04/11/2012      04/06/2012  (G) Pentasodium 2-
                                                     (bis(substituted-
                                                     (substituted-
                                                     sulfonatophenyl)dia
                                                     zenyl-2-
                                                     (sulfonatoalkoxy)an
                                                     ilino]triazin-
                                                     ylamino)
                                                     alkanesulfonate.

[[Page 32969]]

 
P-12-0128.........      04/11/2012      04/06/2012  (G) Reaction product
                                                     of {mixture of
                                                     [polysubstituted-
                                                     sulfonylphthalocyan
                                                     inato- N(29),
                                                     N(30), N(31),
                                                     N(32)] copper(ii)
                                                     and
                                                     [polysubstituted-
                                                     sulfonyl(tribenzo-
                                                     [b,g,l] pyrido[2,3-
                                                     q]-
                                                     tetraazaporphyrinat
                                                     o- N(21), N(22),
                                                     N(23),
                                                     N(24))]copper(ii)
                                                     and
                                                     [polysubstituted-
                                                     sulfonyl(dibenzo-
                                                     [b,g(or
                                                     b,l)]dipyrido[2,3
                                                     (or 3,2)-l,q(or
                                                     g,q)]-
                                                     tetraazaporphyrinat
                                                     o- N(21), N(22),
                                                     N(23),
                                                     N(24))]copper(ii)
                                                     and [substituted-
                                                     sulfonyl(benzo[b]tr
                                                     ipyrido[2,3 (or
                                                     3,2)-g,l,q]-
                                                     tetraazaporph
                                                     yrinato- N(21),
                                                     N(22), N(23),
                                                     N(24))]
                                                     copper(ii){time}
                                                     and 2-[4-
                                                     (aminoalkylamino)-6-
                                                     (benzylamino)-
                                                     triazin-ylamino]
                                                     benzenedisulfonic
                                                     acid.
P-12-0129.........      04/11/2012      04/06/2012  (G) Hexa(sodium,
                                                     lithium)-4-
                                                     {[substituted-
                                                     hydroxy-({4-[alkoxy-
                                                     sulfonatobenzothiaz
                                                     olyl) diazenyl]-
                                                     alkyl-2-
                                                     (sulfonatoalkoxy)ph
                                                     enyl{time} diazenyl
                                                     )naphthalene-yl]
                                                     diazenyl{time} -
                                                     substituted-
                                                     (sulfonatophenyl)py
                                                     razole-3-
                                                     carboxylate.
P-12-0137.........      04/16/2012      04/12/2012  (S) Hexanedioic
                                                     acid, polymer with
                                                     2,2-dimethyl-1,3-
                                                     propanediol, 1,2-
                                                     ethanediamine, 3-
                                                     hydroxy-2-
                                                     (hydroxymethyl)-2-
                                                     methylpropanoic
                                                     acid and 1,1'-
                                                     methylenebis[4-
                                                     isocyanatocyclohexa
                                                     ne], diethylamine-
                                                     blocked, compounds
                                                     with triethylamine.
P-12-0144.........      04/16/2012      04/07/2012  (G) 2-propenoic
                                                     acid, 2-methyl-,
                                                     polymer with
                                                     substitutedoxirane,
                                                     ethenylbenzene,
                                                     ethenylbenzene
                                                     telomer with
                                                     substitutedpropanoi
                                                     c acid 2-hdyroxy-3-
                                                     [(2-methyl-1-oxo-2-
                                                     propen-1-
                                                     yl)oxy]propyl
                                                     ester, 2-ethyl-2-
                                                     (hydroxymethyl)-1,3-
                                                     propanedoil
                                                     and.alpha.-(2-
                                                     methyl-1-oxo-2-
                                                     propen-1-yl)-
                                                     .omega.-(2-
                                                     ethylhexyloxy)poly(
                                                     oxy-1,2-
                                                     ethanediyl), alkali
                                                     metal salt.
------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: May 21, 2012.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2012-13437 Filed 6-1-12; 8:45 am]
BILLING CODE 6560-50-P