[Federal Register Volume 77, Number 152 (Tuesday, August 7, 2012)]
[Rules and Regulations]
[Page 46948]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-19389]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Bureau of Industry and Security

15 CFR Part 774


The Commerce Control List

CFR Correction

    In Title 15 of the Code of Federal Regulations, Parts 300 to 799, 
revised as of January 1, 2012, in supplement no. 1 to part 774, make 
the following corrections:

0
1. In Category 7:
0
A. On page 838, in 7A002, under the table in ``Licensing 
Requirements'', add a ``License Requirements Note'' as set forth below.
0
B. On page 839, in 7A005, above ``License Requirements'', remove the 
Note to 7A005.
0
C. On page 840, in 7A008, add ``License Requirements'' above ``Reason 
for Control''.
0
D. On page 843, in 7B101, in the heading, add a quotation mark before 
``Production''.
0
E. On page 847, in 7E003, at the end of ``Related Definition'', add 
``for `Maintenance Level I' or `Maintenance Level II'''.

0
2. In Category 9, on page 870, in 9E003, below paragraph a.10, remove 
Note 1 and Note 2.
    The text to be added is set forth below:

Supplement No. 1 to Part 774--The Commerce Control List

* * * * *

Category 7

* * * * *
    7A002 Gyros or angular rate sensors, having any of the following 
see List of Items Controlled) and specially designed components 
therefor.
* * * * *
    License Requirement Note: For the purpose of MT controls only, 
the term `stability' is defined as a measure of the ability of a 
specific mechanism or performance coefficient to remain invariant 
when continuously exposed to a fixed operating condition. (This 
definition does not refer to dynamic or servo stability.) (IEEE STD 
528-2001 paragraph 2.247)
* * * * *
[FR Doc. 2012-19389 Filed 8-6-12; 8:45 am]
BILLING CODE 1505-01-D