[Federal Register Volume 78, Number 18 (Monday, January 28, 2013)]
[Notices]
[Page 5856]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-01710]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration


Agency Information Collection Activities: Requests for Comments; 
Clearance of Renewed Approval of Information Collection: Certification 
Procedures for Products and Parts

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice and request for comments.

-----------------------------------------------------------------------

SUMMARY: In accordance with the Paperwork Reduction Act of 1995, FAA 
invites public comments about our intention to request the Office of 
Management and Budget (OMB) approval to renew an information 
collection. The Federal Register Notice with a 60-day comment period 
soliciting comments on the following collection of information was 
published on October 2, 2012, vol. 77, no. 191, page 60166. 14 CFR part 
21 prescribes certification standards for aircraft, aircraft engines, 
propellers appliances and parts. The information collected is used to 
determine compliance and applicant eligibility. The respondents are 
aircraft parts designers, manufacturers, and aircraft owners.

DATES: Written comments should be submitted by February 27, 2013.

FOR FURTHER INFORMATION CONTACT: Kathy DePaepe at (405) 954-9362, or by 
email at: Kathy.A.DePaepe@faa.gov.

SUPPLEMENTARY INFORMATION:
    OMB Control Number: 2120-0018
    Title: Certification Procedures for Products and Parts
    Form Numbers: FAA Forms 8110-12, 8130-1, 8130-6, 8130-9, 8130-12.
    Type of Review: Renewal of an information collection.
    Background: 14 CFR part 21 prescribes certification standards for 
aircraft, aircraft engines, propellers appliances and parts. The 
information collected is used to determine compliance and applicant 
eligibility. FAA Airworthiness inspectors, designated inspectors, 
engineers, and designated engineers review the required data submittals 
to determine that aviation products and articles and their 
manufacturing facilities comply with the applicable requirements, and 
that the products and articles have no unsafe features.
    Respondents: Approximately 13,339 aircraft parts designers, 
manufacturers, and aircraft owners.
    Frequency: Information is collected on occasion.
    Estimated Average Burden per Response: 30 minutes.
    Estimated Total Annual Burden: 19,487 hours.

ADDRESSES: Interested persons are invited to submit written comments on 
the proposed information collection to the Office of Information and 
Regulatory Affairs, Office of Management and Budget. Comments should be 
addressed to the attention of the Desk Officer, Department of 
Transportation/FAA, and sent via electronic mail to oira_submission@omb.eop.gov, or faxed to (202) 395-6974, or mailed to the 
Office of Information and Regulatory Affairs, Office of Management and 
Budget, Docket Library, Room 10102, 725 17th Street NW., Washington, DC 
20503.
    Public Comments Invited: You are asked to comment on any aspect of 
this information collection, including (a) Whether the proposed 
collection of information is necessary for FAA's performance; (b) the 
accuracy of the estimated burden; (c) ways for FAA to enhance the 
quality, utility and clarity of the information collection; and (d) 
ways that the burden could be minimized without reducing the quality of 
the collected information. The agency will summarize and/or include 
your comments in the request for OMB's clearance of this information 
collection.

    Issued in Washington, DC, on January 22, 2013.
Albert R. Spence,
FAA Assistant Information Collection Clearance Officer, IT Enterprises 
Business Services Division, AES-200.
[FR Doc. 2013-01710 Filed 1-25-13; 8:45 am]
BILLING CODE 4910-13-P