[Federal Register Volume 78, Number 114 (Thursday, June 13, 2013)]
[Notices]
[Page 35604]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2013-14047]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-59-2013]
Foreign-Trade Zone (FTZ) 155--Calhoun/Victoria Counties, Texas;
Notification of Proposed Production Activity; Caterpillar, Inc.;
(Excavator and Frame Assembly Production), Victoria, Texas
The Calhoun-Victoria Foreign Trade Zone, Inc., grantee of FTZ 155,
submitted a notification of proposed production activity to the FTZ
Board on behalf of Caterpillar, Inc. (Caterpillar), located in
Victoria, Texas. The notification conforming to the requirements of the
regulations of the FTZ Board (15 CFR 400.22) was received on May 29,
2013.
The Caterpillar facility is located within FTZ 155, Site 5, at 7300
Lone Tree Road, Victoria, Texas. The facility is used for the
production of excavators and related frame assemblies. Pursuant to 15
CFR 400.14(b), FTZ activity would be limited to the specific foreign-
status materials and components and specific finished products listed
in the submitted notification (as described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures could exempt Caterpillar from
customs duty payments on the foreign status components used in export
production. On its domestic sales, Caterpillar would be able to choose
the duty rates during customs entry procedures that apply to hydraulic
track-type excavators and related fabricated frame assemblies (duty
free) for the foreign status inputs noted below. Customs duties also
could possibly be deferred or reduced on foreign status production
equipment.
The components and materials sourced from abroad include: Paints;
sealants; windshield washer fluids; lubrication oils; catalysts;
antifreeze; plastic articles (PVC rods and tubes, tubes, hoses,
fittings, tape, decals, seal strips, bags, plugs, caps, retaining
rings, clamping blocks, and clips); rubber articles (plates, sheets,
shapes, grommets, clamps, hose, fittings, floor mats, gaskets, seals,
insulation and lenses); v-ribbed belts; cork articles (sheets and
gaskets); paper articles (gaskets, decals, and printed matter);
graphite articles, including exhaust gaskets; gaskets made of mineral
substances; ceramic substrate for catalytic converters; articles of
glass (windows, rearview mirrors, and lenses); fiberglass sleeves;
articles of steel (wire, tubing, fittings, flanges, threaded elbows,
bends/couplings, lanyard cable, chain, fasteners; articles of copper
(tubing, fittings, cables, washers, screws, gaskets, and seals);
articles of aluminum (tubing, fittings, and rivets); padlocks with
keys; locks; keys; metal hinges; mountings; supports; tubing
nameplates; diesel engines; hydraulic components (cylinders, motors,
governors, and pumps); compressors; fans (blades); turbochargers; air
conditioners; heat exchangers; filters; windshield washer systems;
buckets for excavators; dozer blades assembled to excavators; parts of
forest machinery; windshield wipers; hydraulic hammers; valves;
bearings; gear boxes; torque converters; final drives; flywheels;
pulleys; gaskets of metal sheeting; seals; gas springs; shims; spacers;
electric motors; power converters; electromagnetic couplings; clutches
and brakes; solenoids; batteries; spark plugs; ignition coils;
alternators; voltage regulators; electric water heaters; electric
heating resistors; apparatus for transmission or receiving data;
images; speakers; DVDs/CDs; smart cards (personality modules);
transceivers; radio navigational aid apparatus; radios; antennas;
indicator panels; horns; visual signaling equipment; capacitors;
electrical terminals; fuses; circuit breakers; relays; switches;
connectors; wire terminals; bus bars; fuse blocks; panels; consoles;
lamps; diodes; transistors; EPROMS/EEPROMS; sensors; transducers;
coaxial cable; wiring harnesses; electric wire; navigational
instruments; hydrometers; measuring and checking instruments and
monitors; odometers; tachometers; automatic regulating or controlling
instruments; seats for excavators; and, electric lamps, lighting
equipment and parts (duty rates range from free to 6.5%).
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is July 23, 2013.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Website, which is accessible via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT: Diane Finver at [email protected]
(202) 482-1367.
Dated: June 7, 2013.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2013-14047 Filed 6-12-13; 8:45 am]
BILLING CODE 3510-DS-P