[Federal Register Volume 79, Number 31 (Friday, February 14, 2014)]
[Proposed Rules]
[Pages 8903-8904]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: C1-2013-28776]


-----------------------------------------------------------------------

DEPARTMENT OF ENERGY

10 CFR Part 431

[Docket Number EERE-2010-BT-STD-0027]
RIN 1904-AC28


Energy Conservation Program: Energy Conservation Standards for 
Commercial and Industrial Electric Motors

Correction

    In proposed rule document 2013-28776 appearing on pages 73589-73681 
in the issue of Friday, December 6, 2013, make the following 
corrections:
    1. On page 73594, Table I.5 should appear as set forth below:

    Table I.5--Proposed Energy Conservation Standards for Integral Brake Electric Motors and Non-Integral Brake Electric Motors (Compliance Starting
                                                                   December 19, 2015)
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                                         Nominal full load efficiency (%)
                                                         -----------------------------------------------------------------------------------------------
      Motor horsepower/standard kilowatt equivalent                   4 Pole                          6 Pole                          8 Pole
                                                         -----------------------------------------------------------------------------------------------
                                                             Enclosed          Open          Enclosed          Open          Enclosed          Open
--------------------------------------------------------------------------------------------------------------------------------------------------------
1/.75...................................................            85.5            85.5            82.5            82.5            75.5            75.5
1.5/1.1.................................................            86.5            86.5            87.5            86.5            78.5            77.0
2/1.5...................................................            86.5            86.5            88.5            87.5            84.0            86.5
3/2.2...................................................            89.5            89.5            89.5            88.5            85.5            87.5
5/3.7...................................................            89.5            89.5            89.5            89.5            86.5            88.5
7.5/5.5.................................................            91.7            91.0            91.0            90.2            86.5            89.5
10/7.5..................................................            91.7            91.7            91.0            91.7            89.5            90.2
15/11...................................................            92.4            93.0            91.7            91.7            89.5            90.2
20/15...................................................            93.0            93.0            91.7            92.4            90.2            91.0
25/18.5.................................................            93.6            93.6            93.0            93.0            90.2            91.0
30/22...................................................            93.6            94.1            93.0            93.6            91.7            91.7
--------------------------------------------------------------------------------------------------------------------------------------------------------

    2. On page 73627, Tables IV.10 and IV.11 should appear as follows:

                           Table IV.10--Efficiency Levels for Equipment Class Group 3
----------------------------------------------------------------------------------------------------------------
                                                   EL 0  (EPACT     EL 1  (NEMA   EL 2  (Best-in-   EL 3  (Max-
               Representative unit                  1992)  (%)     premium)  (%)   market*)  (%)    tech)  (%)
----------------------------------------------------------------------------------------------------------------
5 hp............................................            87.5            89.5            90.2            91.0
30 hp...........................................            92.4            93.6            94.1            94.5
75 hp...........................................            94.1            95.4            95.8            96.2
----------------------------------------------------------------------------------------------------------------


                           Table IV.11--Efficiency Levels for Equipment Class Group 2
----------------------------------------------------------------------------------------------------------------
                                                            EL 1  (EPACT       EL 2  (NEMA      EL 3  (Max-tech)
                  Representative unit                        1992)  (%)       premium)  (%)           (%)
----------------------------------------------------------------------------------------------------------------
5 hp...................................................               87.5               89.5               91.0
50 hp..................................................               92.4               93.6               94.5
----------------------------------------------------------------------------------------------------------------


[[Page 8904]]

    3. On page 73634, in Table IV.14, In the second row, in the second 
column ``1.61'' Should read ``51.61''.

                 Table IV.14--Product Conversion Costs for Efficiency Levels above NEMA Premium
----------------------------------------------------------------------------------------------------------------
                                                                  Per unit adder for 1     Per unit adder for 2
                      Representative unit                           band above NEMA          bands above NEMA
                                                                        premium                  premium
----------------------------------------------------------------------------------------------------------------
5 HP, Design B................................................                   $11.06                   $17.36
30 HP, Design B...............................................                   $32.89                   $51.61
75 HP, Design B...............................................                   $66.18                  $103.86
5 HP, Design C................................................                   $10.68                   $16.75
50 HP, Design C...............................................                   $60.59                   $95.08
----------------------------------------------------------------------------------------------------------------

Sec.  431.25  [AMENDED]

    4. On page 73679, in Sec.  431.25(d), Table 4 should appear as set 
forth below:

      Table 4--Nominal Full-Load Efficiencies of NEMA Design B General Purpose Electric Motors (Subtype I and II), Except Fire Pump Electric Motors
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                                               Nominal full-load efficiency
                                                                 ---------------------------------------------------------------------------------------
          Motor horsepower/standard kilowatt equivalent                  Open motors (number of poles)             Enclosed motors (number of poles)
                                                                 ---------------------------------------------------------------------------------------
                                                                      8          6          4          2          8          6          4          2
--------------------------------------------------------------------------------------------------------------------------------------------------------
250/186.........................................................       94.5       95.4       95.4       94.5       94.5       95.0       95.0       95.4
300/224.........................................................  .........       95.4       95.4       95.0  .........       95.0       95.4       95.4
350/261.........................................................  .........       95.4       95.4       95.0  .........       95.0       95.4       95.4
400/298.........................................................  .........  .........       95.4       95.4  .........  .........       95.4       95.4
450/336.........................................................  .........  .........       95.8       95.8  .........  .........       95.4       95.4
500/373.........................................................  .........  .........       95.8       95.8  .........  .........       95.8       95.4
--------------------------------------------------------------------------------------------------------------------------------------------------------

[FR Doc. C1-2013-28776 Filed 2-13-14; 8:45 am]
BILLING CODE 1505-01-D