[Federal Register Volume 79, Number 39 (Thursday, February 27, 2014)] [Notices] [Pages 11105-11106] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2014-04263] [[Page 11105]] ======================================================================= ----------------------------------------------------------------------- FEDERAL COMMUNICATIONS COMMISSION Information Collection Being Submitted to the Office of Management and Budget for Review and Approval AGENCY: Federal Communications Commission. ACTION: Notice and request for comments. ----------------------------------------------------------------------- SUMMARY: As part of its continuing effort to reduce paperwork burden and as required by the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. 3501-3520), the Federal Communications Commission invites the general public and other Federal agencies to take this opportunity to comment on the following information collection(s). Comments are requested concerning: Whether the proposed collection of information is necessary for the proper performance of the functions of the Commission, including whether the information shall have practical utility; the accuracy of the Commission's burden estimate; ways to enhance the quality, utility, and clarity of the information collected; ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology; and ways to further reduce the information burden for small business concerns with fewer than 25 employees. The FCC may not conduct or sponsor a collection of information unless it displays a currently valid OMB control number. No person shall be subject to any penalty for failing to comply with a collection of information subject to the Paperwork Reduction Act (PRA) that does not display a valid OMB control number. DATES: Written Paperwork Reduction Act (PRA) comments should be submitted on or before March 31, 2014. If you anticipate that you will be submitting PRA comments, but find it difficult to do so within the period of time allowed by this notice, you should advise the FCC contact listed below as soon as possible. ADDRESSES: Submit your PRA comments to Nicholas A. Fraser, Office of Management and Budget, via fax at 202-395-5167 or via Internet at [email protected] and to Benish Shah, Federal Communications Commission, via the Internet at [email protected]. To submit your PRA comments by email send them to: [email protected]. FOR FURTHER INFORMATION CONTACT: Benish Shah, Office of Managing Director, (202) 418-7866. SUPPLEMENTARY INFORMATION: OMB Control Number: 3060-0057. Title: Application for Equipment Authorization, FCC Form 731. Form Number: FCC 731. Type of Review: Extension of currently approved collection. Respondents: Business or other for profit. Number of Respondents: 3,740 respondents; 22,250 responses. Time per Response: 35 hours. Frequency of Response: On occasion reporting requirement and third party disclosure requirement. Obligation to Respond: Required to obtain or retain benefits. Statutory authority for this information collection is contained in the 47 U.S.C. 154(i), 301, 302, 303(e), 303(f) and 303(r). Total Annual Burden: 778,750 hours. Total Annual Costs: $ 34,465,000. Privacy Act Impact Assessment: No impact(s). Nature and Extent of Confidentiality: Minimal exemption from the Freedom of Information Act (FOIA) under 5 U.S.C. 552(b)(4) and FCC rules under 47 CFR 0.457(d) is granted for trade secrets which may be submitted as attachments to the application FCC Form 731. No other assurances of confidentiality are provided to respondents. Needs and Uses: The Commission will submit this expiring information collection (IC) to the OMB during this comment period. There is an increase in respondents/burden estimates in this information collection. Commission rules require that manufacturers of certain radio frequency (RF) equipment file FCC Form 731 to obtain approval prior to marketing their equipment. Manufacturers may then market their RF equipment based on a showing of compliance with technical standards established in the FCC Rules for each type of equipment or device operated under the applicable FCC Rule part. The following types of equipment are regulated (a) the RF equipment is regulated under certain rule sections of 47 CFR Part 15 and Part 18, and (b) in addition, rules governing certain RF equipment operating in the licensed services also require equipment authorization as established in the procedural rules in 47 CFR Part 2. The RF equipment manufacturers comply with the information collection requirements by (a) Filing FCC Form 731 electronically with the Commission, or (b) Submitting the information to a Telecommunications Certification Body (TCB), which acts on behalf of the FCC to issue grants of certification and may issue grants more expeditiously than the FCC. The TCBs have flexibility in the format in which they require the collection of information (i) TCBs may require applicants to submit the required information in FCC Form 731 format or in another format selected by the TCB, but (ii) whatever the information collection method, the information required is governed by the procedural rules in 47 CFR Part 2 and a showing of compliance with the FCC technical standards for the specific type of equipment. RF manufacturer applicants for equipment certification may also request ``expedited authorization'' to market their equipment by: (a) Choosing to pay the fee levied by a TCB, and (b) submitting their request to a TCB in order for expedited authorization to market. The TCB processes the RF equipment manufacturer's application as follows: (i) The TCB receives and reviews the RF manufacturer's information submission/ application; and (ii) the TCB enters the information into the FCC Equipment Authorization System database using an interface that provides the TCB with the tools to issue a standardized Grant of Equipment Authorization. Whichever method the RF manufacturers choose to submit their information--via either the FCC on FCC Form 731 or the TCB, FCC Rules require that applicants supply the following data: (a) Demographic information including Grantee name and address, contact information, etc.; (b) information specific to the equipment including FCC Identifier, equipment class, technical specifications, etc.; and (c) attachments that demonstrate compliance with FCC Rules that may include any combination of the following based on the applicable Rule parts for the equipment for which authorization is requested: (1) Identification of equipment (47 CFR 2.925); (2) attestation statements that may be required for specific equipments; (3) external photos of the equipment for which authorization is requested; (4) block diagram of the device; (5) schematics; (6) test report; (7) test setup photos; (8) Users Manual; (9) Internal Photos; (10) Parts List/Tune Up Information; (11) RF Exposure Information; (12) Operational Description; (13) Cover Letters; and, (14) Software Defined Radio/ Cognitive Radio Files. In general, an applicant's submission is as follows: (a) FCC Form 731 includes approximately two pages covering the demographic and equipment identification information; and (b) [[Page 11106]] applicants must supply additional documentation and other information, as described above, demonstrating conformance with FCC Rules, which may range from 100-1,000 pages. The supplemental information is essential to control potential interference to radio communications, which the FCC may use, as is necessary, to investigate complaints of harmful interference. In response to new technologies and in allocating spectrum, the Commission may establish new technical operating standards: (a) RF equipment manufacturers must meet the new standards to receive an equipment authorization, and (b) RF equipment manufacturers must still comply with the Commission's requirements in FCC Form 731 and demonstrate compliance as required by 47 CFR Part 2 of FCC Rules. Thus, this information collection applies to a variety of RF equipment: (a) That is currently manufactured, (b) that may be manufactured in the future, and (c) that operates under varying technical standards. On July 8, 2004, the Commission adopted a Report and Order, Modification of Parts 2 and 15 of the Commission's Rules for Unlicensed Devices and Equipment Approval, ET Docket No. 03-201, FCC 04-165. The change requires that all paper filings required in 47 CFR Sections 2.913, 2.926(c), 2.929(c), and 2.929(d) of the rules are outdated and now must be filed electronically via the Internet on FCC Form 731. The Commission believes that electronic filing speeds up application processing and supports the Commission in further streamlining to reduce cost and increase efficiency. Information on the procedures for electronically filing equipment authorization applications can be obtained from the Commission's rules, and from the Internet at: http://transition.fcc.gov/oet/ea/ea_app_info.htm. Federal Communications Commission. Marlene H. Dortch, Secretary, Office of the Secretary, Office of Managing Director. [FR Doc. 2014-04263 Filed 2-26-14; 8:45 am] BILLING CODE 6712-01-P