[Federal Register Volume 79, Number 64 (Thursday, April 3, 2014)]
[Notices]
[Pages 18665-18666]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2014-07483]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-33-2014]
Foreign-Trade Zone (FTZ) 72--Indianapolis, Indiana, Notification
of Proposed Production Activity, OHL Contract Logistics, LLC,
(Kitting--Subassemblies and Parts for Heavy Trucks, Excavation
Machinery), Plainfield, Indiana
OHL Contract Logistics, LLC (OHL), an operator of FTZ 72, submitted
a notification of proposed production activity to the FTZ Board for its
facility located in Plainfield, Indiana within FTZ 72. The notification
conforming to the requirements of the regulations of the FTZ Board (15
CFR 400.22) was received on March 12, 2014.
The OHL facility is located within Site 16 of FTZ 72. The facility
is used for the production of kits comprised of parts, components, and
subassemblies for heavy trucks, excavation machinery, and related
equipment. Pursuant to 15 CFR 400.14(b), FTZ authority would be limited
to the specific foreign-status materials and components and specific
finished products described in the submitted notification (as described
below) and subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt OHL from customs duty
payments on the foreign status materials/components used in export
production. On its domestic sales, OHL would be able to choose the duty
rates during customs entry procedures that apply to: Grease kits;
sealant kits; antifreeze kits; plastic tube kits; plastic brake line
guard kits; body down sensor kits; rubber hose kits; hydraulic breather
hose kits; rubber gasket kits; seal kits; mount kits; mudguard kits;
strut damper kits; manual (drawings, repair, decal) kits; mirror kits;
insulation kits; drain plug kits; hoist support kits; fitting kits;
plug assembly kits; fuel cap breather kits; metal tank/container/can
kits; accumulator kits; steel fastener/nut/washer/ring/shim/clamp kits;
steel isolator kits; bushing installation kits; crimper kits; tool
kits; keys kits; hinge kits; mounting/fitting kits; service center line
kits; steel tubing kits; oil drain kits; fuel line kits; shutdown kits;
switch kits; housing kits; cover kits; gear kits; hydraulic motor parts
kits; actuators kits; cylinder kits; engine seal kits; hydraulic pump
kits; lubricating kits; bracket kits; air-conditioning compressor and
mounting kits; blower kits; exhaust kits; rectifier enclosure kits;
cooling duct-chassis kits; electrical kits; air-conditioning kits; heat
exchanger kits; oil/fuel/air filter kits; load weigh kits; engine/
transmission lift kits; jack kits; hoist kits; kingpin bushing kits;
lift assembly kits; reduction valve kits; check/relief valve kits;
valve repair kits; sample port kits; fast fuel kits; seal kits;
fittings kits; hoist valve parts kits; hydraulic breather relocation
kits; bearing assembly/repair kits; differential repair kits; PTO
overhaul kits; bearing kits; roller/spider/carrier bearing repair kits;
thrust washer kits; grid motor with air duct kits; electric/DC motor
kits; rectifier repair kits; battery equalizer kits; battery cable
kits; battery kits; disconnect switch kits; DC converter kits; magnetic
cap kits; voltage regulator kits; gauge kits; headlight kits; flasher
kits; backup alarm kits; windshield washer kits; hot start kits; engine
heater kits; mine management telemetry kits; software diagnostic/update
kits; smart card kits; radio-cassette kits; safety monitor retrofit
kits; speed limiting kits; indicator light kits; indicator panel parts
kits; grid box resistor update kits; circuit breaker kits; electrical
switch kits; junction kits; regulator kits; terminal kits; electrical
repair kits; instrumentation kits; diode installation kits; tail light
kits; power cable kits; wiring harness kits; electrical kits; bearing
hub isolator kits; wiring/electrical conduit kits; cab assembly kits;
body parts/accessories kits; driveline kits; driveline guide kits; fan
and belt kits; hoist valve parts kits; lever assembly kits; shield
rework kits; steering upgrade kits; tank repair kits; tower assembly
kits; track rod lug kits; transmission guard kits; brake part kits;
shifter replacement kits; spindle kits; axle and parts kits; hydraulic
tube kits; wheel kits; suspension seal kits; frame repair kits;
radiator mount kits; exhaust kits; piston-ring kits; shift selector
kits; handle assembly kits; driveshaft kits; steering kits; frame
repair kits; PTO driveline kits; planetary kits; journal and shim kits;
dust cap-seal kits; pump isolation kits; fuel tank/fittings kits; fuel
tank vent hose kits; frame re-work kits; fall protection kits; inverter
plate installation kits; cab connector guard kits; hydraulic tank kits;
coolant tube kits; air duct kits; air inlet silencer kits; anchor
shackle kits; high arc re-work kits; yoke assembly kits; tank breather
kits; hoist cylinder kits; fluid level sensor kits; transducer kits;
temperature gauge kits; fuel level kits; speedometer/tachometer kits;
instrument conversion kits; electrical current instrument kits; body
angle sensor kits; camera kits; controller kits; and, seat kits (duty
rate ranges from free-9.0%; 12[cent]/doz+5.5%) for the foreign status
materials/components noted below. Customs duties also could possibly be
deferred or reduced on foreign status production equipment.
The materials/components sourced from abroad include: Greases;
nitrogen cartridges; primers; solvents; sealing compounds; lubricants;
anti-seize pastes; adhesives; refrigerants; anti-freeze/coolants;
plastic tubing/shrink/hose assemblies/tapes/protectors/handles/knobs/
packing-sealing materials/assemblies/rings/o-rings/seals/ring wear/
moldings/ring backs/guides/wipers/rods/bases/seal steps/packing
materials/v-belts/cable ties/boots/louvers/sleeves/fuel tanks/caps;
rubber pads/tapes/mudguards/belts/hoses and assemblies/fittings/brake
hoses/fasteners/sound insulators/gaskets/washers/seals/covers/guards/
mounts/vibration mounts/moldings/air baffles/dampers/valves/bushings/
boots/valve vacuators; tool bags of textile materials (HTSUS Subheading
4202.12); paper marker wire (labels)/gaskets; service bulletins;
instruction manuals; drawings; cards; schematics; transfers; decals;
Mylar films; felt hoses/seals/pads/covers; ducts; looms; gaskets;
abrasive strips; insulation blankets; exhaust blankets; brake linings/
pads; carbon fiber gaskets; glass; mirrors; fiberglass covers; steel
bars/wires/caps/tubes/weldments/fittings/unions/flanges/tanks/
accumulators/tie wires/rings/cable strands/springs/bushings; locks;
fasteners (screws, bolts, nuts, pins, cotter pins); spacers; steel
rods/clamps/plugs/threaded inserts/gaskets/shackles; copper fittings/
washers/plugs/up rings; aluminum manifold blocks/tubes/caps/plates;
hand tools; clamps and related assemblies; service tool kits; gauges;
locks/keys; hinges; base metal mountings and fittings; latches;
supports; brackets; bracket/mount/clamp assemblies; steel flex tubing;
plates; name plates and related assemblies; yokes; hydraulic cylinders
and related parts; electric motors; pumps/pump kits and parts;
compressors; fans; rectifier enclosures; air-conditioning/heat units/
clutches; condensing units; drain hose kits; actuators; coolers;
filters; air cleaners; elements; breather vents; haultronics kits; fire
suppression system parts;
[[Page 18666]]
engine/transmission lifts; lifter weldments; drills; data cables/
adapters; converters; valves and assemblies; valve covers; tie rods;
controllers; manifolds; solenoids; hand taps; bearings and related
assemblies; cups; cones; shafts; driveshafts; cranks; bushings; gears;
couplings; hubs; pulleys and related adapters; pinions; motors (e.g.,
grid box, traction) and related parts; transformers; converters; wiring
harnesses; battery equalizers; connectors; rectifiers and covers; arc
chute kits; magnetic caps; batteries; cable assemblies; controllers and
panels; lamps; headlamps; tail lamps; parts of lighting equipment;
indicators; horns; load weigh assembly boxes; alarms; lenses; flashers;
telemetry devices; interface cables; cameras and related harnesses;
radios; monitors; displays; speed limiters; indicator boxes; voltage
sensors; potentiometers; fuses and holders; circuit breakers; relays;
modules; socket assemblies; blocks; terminals; splices; buss bars;
contacts; receptacles; isolators and related assemblies; junction
boxes; jumpers; panels; ECUs; electrical cables; loadweigh equipment;
boards; moldings; FPGA cards; conduits; camera cables; sub-cabs; air
baffles; retainers; straps; stamped body parts (e.g., boxes, fenders,
guards); bands; deflectors; machining daggers; heat shields; disks and
locators; levers; door/body templates; sheet metal walkways; fuel
lines; gussets; keepers; anchors; platforms; channels; support frames;
sleeves; housings; grilles; frame parts and lugs; handles; steps; tank
protective parts; brakes and related parts; ring seals; oil pans;
strips; shims; drive axles and related parts; road wheels and related
parts; rings; guides; air coolers; mufflers; exhaust parts; engine
parts (e.g., pistons, rings); cylinders; sockets; steering parts; fuel
tanks; hydraulic tanks; insulated boxes; sensors (e.g., fluid,
velocity, pressure, temperature); transducers; senders; tachometers;
testing instruments; loadweigh equipment; thermostats; grommets; puller
plate assemblies; tool assemblies; outlet sections; plungers; arms;
links; pivots; heaters; resistors; switches; electrical plugs;
electrical boxes; warning systems; software; balls-electrical; diodes;
integrated circuit parts; electrical sensors/brushes/brush holders/
brush springs/insulation/insulators; motor vehicle parts (bars, covers,
pads, weldments, rods, tubes, angles, bases, drums); power train parts;
tube assemblies; sensor assemblies; and, seats and related supports
(duty rate ranges from free to 9.9%, 12[cent]/doz+5.5%). Inputs
included in certain textile categories (classified within HTSUS
Subheading 4202.12) will be admitted to the zone under domestic (duty-
paid) status or privileged foreign status (19 CFR 146.41), thereby
precluding inverted tariff benefits on such items.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is May 13, 2014.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For Further Information Contact: Pierre Duy at
[email protected], (202) 482-1378.
Dated: March 27, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-07483 Filed 4-2-14; 8:45 am]
BILLING CODE 3510-DS-P