[Federal Register Volume 79, Number 125 (Monday, June 30, 2014)]
[Rules and Regulations]
[Pages 36657-36658]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: C1-2014-06954]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Parts 79, 80, 85, 86, 600, 1036, 1037, 1039, 1042, 1048, 
1054, 1065, and 1066

[EPA-HQ-OAR-2011-0135; FRL 9906-86-OAR]
RIN 2060-AQ86


Control of Air Pollution From Motor Vehicles: Tier 3 Motor 
Vehicle Emission and Fuel Standards

Correction

    In rule document 2014-06954, appearing on pages 23414-23886, in the 
issue of Monday, April 28, 2014, make the following corrections:


Sec.  86.113-94  Fuel specifications. [Corrected]

0
On page 23695 make the following correction:
    The first table on page 23695 is corrected as set forth below.

----------------------------------------------------------------------------------------------------------------
                                                                                                   Reference
           Property                          Unit                          Type 2-D              procedure \1\
----------------------------------------------------------------------------------------------------------------
(i) Cetane Number.............  ..............................  40-50........................  ASTM D613
(ii) Cetane Index.............  ..............................  40-50........................  ASTM D976
(iii) Distillation range:
    (A) IBP...................                                  340-400 (171.1-204.4)........
    (B) 10 pct. point.........                                  400-460 (204.4-237.8)........
    (C) 50 pct. point.........  [deg]F ([deg]C)...............  470-540 (243.3-282.2)........  STM D86
    (D) 90 pct. point.........                                  560-630 (293.3-332.2)........
    (E) EP....................                                  610-690 (321.1-365.6)

[[Page 36658]]

 
(iv) Gravity..................  [deg]API......................  32-37........................  ASTM D4052
(v) Total sulfur..............  ppm...........................  7-15.........................  ASTM D2622
(vi) Hydrocarbon composition:   pct...........................  27...........................  ASTM D5186
 Aromatics, minimum (Remainder
 shall be paraffins,
 naphthenes, and olefins).
(vii) Flashpoint, min.........  [deg]F ([deg]C)...............  130 (54.4)...................  ASTM D93
(viii) Viscosity..............  centistokes...................  2.0-3.2......................  ASTM D445
----------------------------------------------------------------------------------------------------------------
\1\ ASTM procedures are incorporated by reference in Sec.   86.1.

Sec.  1065.845  Response factor determination. [Corrected]

0
On page 23813 make the following correction:
    The table heading for the table titled ``Table 1 of Sec.  
1065.845'' is corrected to read as set forth below.

Table 1 of Sec.  1065.845--Default Values for THC FID Response Factor 
Relative to Propane on a C1-Equivalent Basis


Sec.  1066.845  AC17 air conditioning efficiency test procedure. 
[Corrected]

0
On page 23881 make the following correction:
    The equation in the first column is corrected to read as set forth 
below.
[GRAPHIC] [TIFF OMITTED] TR30JN14.057

[FR Doc. C1-2014-06954 Filed 6-27-14; 8:45 am]
BILLING CODE 1505-01-D