[Federal Register Volume 79, Number 172 (Friday, September 5, 2014)]
[Notices]
[Page 53074]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2014-21214]
[[Page 53074]]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek USA, Inc., as a Commercial
Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Intertek USA, Inc., as
a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Intertek USA, Inc. has been approved to gauge petroleum and certain
petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes for the next three years as of
August 29, 2013. This notice modifies a notice previously published on
July 9, 2014 in the Federal Register (79 FR 38942) by including one
additional laboratory method in the list of accredited methods,
specifically ASTM D 3606.
DATES: Effective Dates: The accreditation and approval of Intertek USA,
Inc., as commercial gauger and laboratory became effective on August
29, 2013. The next triennial inspection date will be scheduled for
August 2016.
FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited
Laboratories Manager, Laboratories and Scientific Services, U.S.
Customs and Border Protection, 1331 Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Intertek USA, Inc., 481-A East Shore
Parkway, New Haven, CT 06512, has been approved to gauge petroleum and
certain petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes, in accordance with the
provisions of 19 CFR 151.12 and 19 CFR 151.13. Intertek USA, Inc. is
approved for the following gauging procedures for petroleum and certain
petroleum products per the American Petroleum Institute (API)
Measurement Standards:
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................. Tank gauging.
7................................. Temperature determination.
8................................. Sampling.
12................................ Calculations.
17................................ Maritime measurement.
------------------------------------------------------------------------
This notice modifies a notice previously published on July 9, 2014
in the Federal Register (79 FR 38942) by including one additional
laboratory method in the list of accredited methods, specifically ASTM
D 3606. Intertek USA, Inc. is accredited for the following laboratory
analysis procedures and methods for petroleum and certain petroleum
products set forth by the U.S. Customs and Border Protection Laboratory
Methods (CBPL) and American Society for Testing and Materials (ASTM):
------------------------------------------------------------------------
CBPL No. ASTM Title
------------------------------------------------------------------------
27-04................ ASTM D 95............. Standard test method for
water in petroleum
products and bituminous
materials by
distillation.
27-06................ ASTM D 473............ Standard Test Method for
Sediment in Crude Oils
and Fuel Oils by the
Extraction Method.
27-08................ ASTM D 86............. Standard Test Method for
Distillation of
Petroleum Products at
Atmospheric Pressure.
27-13................ ASTM D 4294........... Standard test method for
sulfur in petroleum and
petroleum products by
energy-dispersive x-ray
fluorescence
spectrometry.
27-14................ ASTM D 2622........... Standard Test Method for
Sulfur in Petroleum
Products (X-Ray
Spectrographic Methods).
27-48................ ASTM D 4052........... Standard Test Method for
Density and Relative
Density of Liquids by
Digital Density Meter.
27-50................ ASTM D 93............. Standard test methods for
flash point by Pensky-
Martens Closed Cup
Tester.
27-54................ ASTM D 1796........... Standard test method for
water and sediment in
fuel oils by the
centrifuge method
(Laboratory procedure).
27-57................ ASTM D 7039........... Standard Test Method for
Sulfur in Gasoline and
Diesel Fuel by
Monochromatic Wavelength
Dispersive X-Ray
Fluorescence
Spectrometry.
27-58................ ASTM D 5191........... Standard Test Method For
Vapor Pressure of
Petroleum Products (Mini
Method).
N/A.................. ASTM D 1319........... Standard Test Method for
Hydrocarbon Types in
Liquid Petroleum
Products by Fluorescent
Indicator Adsorption.
N/A.................. ASTM D 4815........... Standard Test Method for
Determination of MTBE,
ETBE, TAME, DIPE,
tertiary-Amyl Alcohol
and C1 to C4 Alcohols in
Gasoline by Gas
Chromatography.
N/A.................. ASTM D 5453........... Standard Test Method for
Determination of Total
Sulfur in Light
Hydrocarbons, Spark
Ignition Engine Fuel,
Diesel Engine Fuel, and
Engine Oil by
Ultraviolet
Fluorescence.
N/A.................. ASTM D 7042........... Standard Test Method for
Dynamic Viscosity and
Density of Liquids by
Stabinger Viscometer
(and the Calculation of
Kinematic Viscosity).
N/A.................. ASTM D 5599........... Standard Test Method for
Determination of
Oxygenates in Gasoline
by Gas Chromatography
and Oxygen Selective
Flame Ionization
Detection.
N/A.................. ASTM D 3606........... Standard Test Method for
Determination of Benzene
and Toluene in Finished
Motor and Aviation
Gasoline by Gas
Chromatography.
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to [email protected].
Please reference the Web site listed below for a complete listing
of CBP approved gaugers and accredited laboratories.
http://www.cbp.gov/sites/default/files/documents/gaulist_3.pdf.
Dated: August 28, 2014.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2014-21214 Filed 9-4-14; 8:45 am]
BILLING CODE 9111-14-P