[Federal Register Volume 79, Number 246 (Tuesday, December 23, 2014)] [Rules and Regulations] [Page 76897] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2014-30196] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Part 1910 Standards Improvement Project--Phase III CFR Correction In Title 29 of the Code of Federal Regulations, Part 1900 to Sec. 1910.999, revised as of July 1, 2014, in Sec. 1910.36, on page 151, revise the Note to paragraph (b), and on page 152, revise the Note to paragraph (f), to read as follows: Sec. 1910.36 Design and construction requirements for exit routes. * * * * * (b) * * * Note to paragraph (b) of this section: For assistance in determining the number of exit routes necessary for your workplace, consult NFPA 101-2009, Life Safety Code, or IFC-2009, International Fire Code (incorporated by reference, see Sec. 1910.6). * * * * * (f) * * * Note to paragraph (f) of this section: Information regarding the ``Occupant load'' is located in NFPA 101-2009, Life Safety Code, and in IFC-2009, International Fire Code (incorporated by reference, see Sec. 1910.6). * * * * * [FR Doc. 2014-30196 Filed 12-22-14; 8:45 am] BILLING CODE 4510-26-P