[Federal Register Volume 80, Number 36 (Tuesday, February 24, 2015)]
[Notices]
[Page 9693]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-03771]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-10-2015]
Foreign-Trade Zone (FTZ) 245--Decatur, Illinois; Notification of
Proposed Production Activity; Thyssenkrupp Presta Danville, LLC;
(Camshafts); Danville, Illinois
The Economic Development Corporation of Decatur & Macon County,
grantee of FTZ 245, submitted a notification of proposed production
activity to the FTZ Board on behalf of Thyssenkrupp Presta Danville,
LLC (Thyssenkrupp Presta), located in Danville, Illinois. The
notification conforming to the requirements of the regulations of the
FTZ Board (15 CFR 400.22) was received on February 18, 2015.
A separate application for subzone designation at the Thyssenkrupp
Presta facility was submitted and will be processed under Section
400.31 of the Board's regulations. The facility is used for the
production of camshafts for the automotive industry. Pursuant to 15 CFR
400.14(b), FTZ activity would be limited to the specific foreign-status
materials and components and specific finished products described in
the submitted notification (as described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures could exempt Thyssenkrupp Presta
from customs duty payments on the foreign status components used in
export production. On its domestic sales, Thyssenkrupp Presta would be
able to choose the duty rates during customs entry procedures that
apply to camshafts for use with spark-ignition internal combustion
piston engines (duty rate 2.5%) for the foreign status inputs noted
below. Customs duties also could possibly be deferred or reduced on
foreign status production equipment.
The components and materials sourced from abroad include: Welded,
cold-drawn steel tubes; camlobes; nosepieces; sensor rings; sprockets;
thrust rings; cap plugs; thrust washers; end plugs; and, end caps (duty
rate ranges from duty-free to 2.8%).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary at the address
below. The closing period for their receipt is April 6, 2015.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Elizabeth Whiteman at
[email protected] or (202) 482-0473.
Dated: February 18, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-03771 Filed 2-23-15; 8:45 am]
BILLING CODE 3510-DS-P